vibration engineering – recognized worldwide firms in the field of vibration engineering. our...
TRANSCRIPT
Vibration Engineering – Recognized Worldwide
MEX (55) 53 63 23 31 QRO (442) 195 72 60MTY (81) 83 54 10 18 [email protected]. AUTORIZADO
AirLoc is a specialized company in the field ofvibration control engineering. For nearly 50 years,we have successfully offered our customers qualityproducts and reliable service.
AirLoc Schrepfer Ltd., Switzerland, in partnership with AirLoc Division of Clark-Cutler-McDermott Co., USA, develop, manufacture andmarket AirLoc / BiLoc pads, Jacmount® levelers,Wedgmount® precision levelers and foundation isolation that are used world wide in a variety ofindustries.
In the special field of vibration isolation of solid-borne sound, we offer custom solutions toproblems that meet the unique requirements ofour customers. With our modern production facilities, testing laboratories equipped with the latest measurement and testing equipment andour on-site engineering service, we are one of theleading firms in the field of vibration engineering.
Our competent, experienced team of engineerscan solve practically any vibration problem. In mostindustrialized countries our AirLoc dealers and representatives stand ready to serve you.The specific properties of AirLoc materials are soversatil that there is truly a «technology of AirLocmaterials», with which a wide variety of technicalproblems can be solved economically.
The information contained in this catalog cannot fully substitute for a technical discussionwith a member of our experienced engineeringstaff. We strongly recommend this review before finalizing your order.
Our decades of experience in various industrialsectors is at your disposal at any time.
Your AirLoc Team
Cost Reduction– Quick and easy installations– Mostly freestanding– Minimum downtime when relocating– Substantial cost savings
Building Protection– No damage or structural weakening
of floor and ceiling supports – Reduction in building immissions
Quality Improvement– Improved surface quality in special
manufacturing processes– Less wear on machines and tools due
to the reduction in active and passive disturbing frequencies
– AirLoc is prefered by OEM’s
Isolation of Solid-Borne SoundThe audible range of the human ear lies between 16 Hz and 20 kHz. The emission ofsolid-borne sound of nearly all machine installations are within these values. Humanbeings perceive them as a source of disturb-ance.The AirLoc pad reduces these disturbancesand separates them from the disturbing ele-ment. Measuring results confirm, dependingupon statical conditions of the building, kindof machinery and suitable AirLoc pad type, a reduction of sound level values of approx. 3-7 dB(A). In nearby rooms/facilities better results can be expected.
AirLoc impact sound isolation is the basiccondition for fulfilling the sound protectionmeasures in production facilities prescribed by law.
AirLoc is committed to progess.The new generation of AirLoc / BiLoc pads,400/700/900 series continues the traditionof the existing AirLoc pads well known fordecades of manufacturing products to thehighest quality standards. Our target continues to be improvement ofthe physical and mechanical properties of the isolation pads in order to achieve highlyefficient and economical isolation systems inthe field of emission/immission reduction.
a Complete Isolation and Leveling System
2
MEX (55) 53 63 23 31 QRO (442) 195 72 60MTY (81) 83 54 10 18 [email protected]. AUTORIZADO
Product Overview
Vibration Isolation Pads Wedgmount® Precision LevelersHorizontal Supports and Accessories
Jacmount® Levelers
BiLoc 400 SeriesNon-skid shim pad
Page 5
aaaaaaaaaaaaaaaaPRP / PRP V / GLP
Pages 16 - 17
HZA and Accessories
Pages 28 - 33
AirLoc 700 and 900 Series Non-skid shim pads
Page 4
aaaaaaaaaaaaaaaaPRG / PRGI
Pages 14 - 15
aaaaaaaaaaaaKSC / KSKC-Compact, rigid clamp leveling and anchoring system
Pages 26 - 27
AirLoc 900 Series
Page 4
aaaaaaaaaaaaaaaaPR
Pages 12 - 13
aaaaaaaaaaaaaaaaVRC / VRKC-Compact and KaBlocbolt-on and bolt-through
Pages 21 - 25
AirLoc 700 Series
Page 4
aaaaaaaaaaaaaaaaGLV / GLR / GLRI / GLRN
Pages 9 - 11
aaaaaaaaaaaaaaaaVRC-Compactfreestanding
Pages 19 - 20
3
MEX (55) 53 63 23 31 QRO (442) 195 72 60MTY (81) 83 54 10 18 [email protected]. AUTORIZADO
15
Overview of Applicationsfor AirLoc Isolation Pads, 700 and 900 Series
705
Applications:AirLoc pads in the 700 (70-75°A Shore)and 900 (90-95°A Shore) series are design-ed to be homogeneous and are suited for a wide range of applications.99% of all problems with vibrations, solid-borne sound and machine installation canbe solved with the AirLoc system, which
1000 x 500500 x 500500 x 250250 x 250100 x 100
Length x Width in mm
Standard sizes:
Other sizes and shapes upon request.
Load capacitydaN/cm2
Thicknessin mm
Coefficientof
adhesion
Natural fre-quency at opti-mal load (Hz)
Application
vert. horiz.
Universal isolation pads with high damping for all types of printing, paper, textile and general machi-nery.
For large presses, forging hammers, generally for machines with high dynamic forces.
Isolation pads that are used on shears, rollers, straightening and bendingmachines, etc.Negative profile
5 - 20 15 0.85 47
50
81
35
32
44
10
11
13
8.5
8
10
40 12
42 15
57 16
82 20
Extremely level stable, maximum-load isolation pads. Can be used on transfer lines, lathes, tooling centers, special machinery, etc.
Non-skid and Non-skid shimming pads 10 - 40 5 0.80 No profile
706 5 - 20 5 0.85 Single profile
707 5 - 20 5 0.85 Double profile
7.5 - 40 3 0.80 No profile
905 7.5 - 40 5 0.80 No profile
features:– a high degree of isolation efficiency– high damping and load-bearing capacity– level stability– a high coefficient of adhesion– homogeneous materials– high strength and good aging character-
istics
AirLoc PadsAirLoc
Pad Type
925
903
717
927
7.5 - 30 3 0.85 Single profile, negative904
915
910
Article No. 3.07152. ..
5 - 20 0.85
Article No. 3.07151. ..
5 - 20 15 0.80
Article No. 3.07150. ..
5 - 20 25 0.85
Article No. 3.07252. ..
5 - 20 25 0.85
Article No. 3.07251. ..
5 - 20 25 0.80
Article No. 3.07250. ..
7.5 - 30 25 0.85
Article No. 3.09252. ..
7.5 - 40 25 0.80
Article No. 3.09250. ..
7.5 - 40 15 0.80
Article No. 3.09150. ..
7.5 - 40 10 0.80
Article No. 3.09100. ..
double profile
716singleprofile
715
no profile
727double profile
726singleprofile
725
no profile
double profile
Article No.
3.07050. ..
3.07051. ..
3.07052. ..
3.09030. ..
3.09031. ..
3.09050. ..
Article No.
...... .70
...... .71
...... .72
...... .76
...... .86
Sample order:Art. No. 3.07152.70 (AirLoc pad 717, 1000 x 500 mm)
no profile
no profile
no profile
4
MEX (55) 53 63 23 31 QRO (442) 195 72 60MTY (81) 83 54 10 18 [email protected]. AUTORIZADO
5
Overview of Applicationsfor BiLoc Isolation Pads, 400 Series
Applications:BiLoc pads 400 series (40-45°A Shore)with unique profiles were specifically devel-oped for low-frequency applications.
They features:– low natural frequencies– high coefficient of adhesion– long life
Standard sizes:
Other sizes and shapes upon request.
1000 x 500 only 405 / 410 / 425500 x 500 all500 x 250 ”250 x 250 ”100 x 100 ”
Length x Width in mm Article No.
...... .70
...... .71
...... .72
...... .76
...... .86
Load capacitydaN/cm2
Thicknessin mmBiLoc
Pad Type
Coefficientof
adhesion
Natural fre-quency at opti-mal load (Hz)
Application
vert. horiz.
For floor of production machinery, measuring equipment, etc.
Like B1, but for sensitive units like laboratory instruments, scales, etc.
Foundation isolation, passive isolation of noise coming from the outside or machines and equipment.
B 1 1 - 5 13 0.90
B 2 1 - 5 26 0.90
B 3 1 - 5 39 0.90
B 4
21 6
5
4
14
10
Isolation pads for use in the chemical and food industries, for special machine construction and mounting tables.
410 2.5 - 10 10 0.90 650
425 2.5 - 7.5 25 0.90 4.522
Non-skid and Non-skid shimming pad
405 2.5 - 10 5 0.90 No profile
BiLoc Pads
1 - 5 52 0.90 9 3.5
Article No. 2.00132. ..
Article No. 2.04202. ..
Article No. 2.04203. ..
Article No. 2.04204. ..
Article No. 2.00100. ..
Article No. 2.00050. ..
Article No. 2.00425. ..
Sample order:Art. No. 2.00132.71 (BiLoc pad B 1, 500 x 500 mm)
double profile
double profile
double profile
double profile
700 Series
900 Series
400 Series
from - 15ºC to + 100ºC
from - 20ºC to + 80ºC
Temperature Resistance
Chemical ResistanceAirLoc and BiLoc pads are largely resistant to oil, emulsions and cleaning agents. When in doubt, please inquire.
AirLoc and BiLocMaterial Properties:
no profile
no profile
MEX (55) 53 63 23 31 QRO (442) 195 72 60MTY (81) 83 54 10 18 [email protected]. AUTORIZADO
6
Isolation Pads: NEW Non-skid Pads: NEW
4.17.4 717 SL 707
4.17.0 715 SL-P1 706
4.17.6 915 S0 705
4.17.5 727 S3 903
4.17.50 725 S6 905
32 B1 SP0 903
SA-W1 B1
Information on the New Isolation and Non-Skid Pad ProgramExamples of Applications
This new catalog is based exclusively on the new AirLoc / BiLoc isolation materials,400 / 700 / 900 series. The known andtrusted qualities of the standard AirLoc
Naturally, the standard AirLoc pads have not been changed and continue to beavailable.
Minster
Müller Martini
Hatebur
Bystronic
pads have been incorporated into this new generation of pads and an enlargedpad range is now available. Here are someexamples of pad comparisons.
MEX (55) 53 63 23 31 QRO (442) 195 72 60MTY (81) 83 54 10 18 [email protected]. AUTORIZADO
7
Applications
AirLoc technology can be adapted to various machines and foundation conditions, hence the partial list of various configuration. You may choose from a variety of AirLoc installations:• Completely freestanding, not bolted onto to the machine
or foundation• Freestanding, but with AirLoc mounts bolted onto the
machine
• Cementable connection between machine and foundation • Rigid connection by bolting to the foundation block• Adjustable impact sound isolation obtained through
different AirLoc pads.
The table below is categorized by industrytype and demonstrates the use and pur-pose of AirLoc products for various typesof machines and equipment.
● preferred application recommended❍ for lightweight units
Jacmount® Adjustable Levelers Wedgmount® Precision Levelers
Bolt-on
acc.to our
proposal
●●
●
●
●●●●
●
●
●●
●
●●●●●
●●●●●
●
●
●●
●
●
●●●
●●
●
●
●
●
●
●
●●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
❍
❍
❍
❍
❍
●
●❍
❍
❍
❍❍❍
❍●
❍
●
●
●●
●
●
●
●●●●
❍●●●
●
●
●
●
●❍
●
❍❍❍❍
●
●
❍●
●●●
●●●●
●
●
●●
●
●
●●
●●
●
●
●●●
●
●
●
●
Metal-working IndustryMachining centersDrilling machinesBoring and turning machinesLathes < 1500 mm turning lengthLathes > 1500 mm turning lengthMilling machines, universal typeMilling machines, console typePlaners and shapersCompressors, pumpsPresses, mechanical /nibbling machinesPresses, hydraulicSaws Shears / Folding machines < 2000Shears / Folding machines > 2000Grinding machinesForging machinesStamping machinesTransfer linesTwisting machines
Plastic and Rubber IndustryGranulatorsKneading machinesMixing mills / CalendersInjection-molding machines
Printing and Paper IndustryBookbinding machinesPrinting machinesFolding machinesPaper processing machinesCutting machinesPackaging machines
Other IndustriesCivil engineeringChemicals (INOX model)HeatingWoodworkingAir conditioningMeasuring instruments /precision scalesFoodstuffs (INOX model)Optical InstrumentsTextilesWashing / cleaning machinery
●
●
●
●
●●
●●●
●
●
●
●
●
●
Free
stan
din
g
Bo
lt-o
n
Bo
lt-t
hro
ug
h
Bo
lt-o
n, n
on
-slip
Bo
lt-o
n/b
olt
-th
rou
gh
KSC-
/KSK
C, in
terlo
ckin
g
Dam
pen
ing
pac
k
Fou
nd
atio
n-
Iso
lati
on
GLV
/ G
LR
GLR
N /
GLP
PR PRG
/ PR
GI
PRP
MEX (55) 53 63 23 31 QRO (442) 195 72 60MTY (81) 83 54 10 18 [email protected]. AUTORIZADO
8
Jacmount® Adjustable LevelersAttractive, low height, economical
– Jacmounts GLV and GLR with optional studs (modular system)
– PR, PRG (pat.) and PRP series with built-in special studs / leveling studs
– Automatic pitch equalization
– Easy mounting and leveling– Effective vibration/solid-borne sound
isolation– High non-skid properties– Optimal use with matching AirLoc pad
– Compensation for larger height differences
PRP 200
PRP 120
GLP 160
PR 75-2
GLRN 151
PRGI 70
PRG 170
PRG 85
GLV 75
GLR 110
PR 200
GLV 110
MEX (55) 53 63 23 31 QRO (442) 195 72 60MTY (81) 83 54 10 18 [email protected]. AUTORIZADO
9
Jacmount® Adjustable Levelers GLV, GLRwith studs type S
1.10050.56 1.10050.65 1.10050.74 1.10050.50
1.10075.56 1.10075.65 1.10075.74 1.10075.50
1.10110.56 1.10110.65 1.10110.74 1.10110.50
1.10115.56 1.10115.65 1.10115.74 1.10115.50
1.10150.56 1.10150.65 1.10150.74 1.10150.50
1.10165.56 1.10165.65 1.10165.74 1.10165.50
1.10175.56 1.10175.65 1.10175.74 1.10175.50
22 22 12 20
25 25 15 23
27 27 17 25
29 29 19 27
30 30 20 28
32 32 22 30
33 33 23 31
50
75
110
115
150
165
175
50
81
123
148
145
199
243
50
81
123
91
145
123
163
Type
GLV
Height h AirLoc / BiLoc Pad(mm) Article No.
max. loadper Jacmount daN
716 915 706 B1 716 915 B1706L b
Dimensions(mm)
Shape
200 200 200 90
750 750 750 250
1700 1700 1700 625
2100 2500 2100 550
2700 2700 2700 900
3800 3800 3800 1000
4300 4300 4300 1700
1.11050.56 1.11050.65 1.11050.74 1.11050.50
1.11075.56 1.11075.65 1.11075.74 1.11075.50
1.11110.56 1.11110.65 1.11110.74 1.11110.50
22 22 12 20
24 24 14 22
27 27 17 25
50
75
110
50
84
123
Type
GLR
Height h AirLoc / BiLoc Pad(mm) Article No.
max. loadper Jacmount daN
716 915 706 B1 716 915 B1706d
Dimensions(mm)
Shape
170 170 170 70
750 750 750 220
1700 1700 1700 475
These easy to use Jacmounts are preferredwhen holes or threads are provided on machine feet. When practical, AirLocGLV/GLR’s with the proper pads are a goodeconomical alternative.
Pad type716 Machine tools, plastics, textile machines,
graphical equipment915 High load, best level stability706 Good level stability and non-skid
propertiesB1 Very good active and passive isolation
of mechanical vibrations, for example for measuring instruments and machinesaffected by outside vibrations
Jacmount Adjustable Levelers GLV
Jacmount Adjustable Levelers GLR
StudsStuds S for type series GLV / GLR availablecomplete with 2 nuts and 2 washers. Thesize depends on the bores/threads in themachine feet and is adjusted to each typeof Jacmount. These have to be selected separately. See page 31.Sample order:
Art. No. 1.10050.56 – GLV 50 / 716
Sample order:Art. No. 1.11050.56 – GLR 50 / 716
Pad type
AirLoc / BiLoc 716 915 706 B1
Other pad types upon request.For detailed technical information and natural frequencies, please see pages 4 - 5.
Standard color: Reseda green / RAL 6011
MEX (55) 53 63 23 31 QRO (442) 195 72 60MTY (81) 83 54 10 18 [email protected]. AUTORIZADO
10
Jacmount® Adjustable Levelers GLR to accomodate studsINOX execution for special applications
1.19111.57 1.19111.65 1.19111.45
1.19112.57 1.19112.65 1.19112.45
1.19114.57 1.19114.65 1.19114.45
22 22 17
22 22 17
24 24 19
50
70
100
120
51
76
107
132
Type
GLRI
Height h AirLoc / BiLoc Pad(mm) Article No.
max. loadper Jacmount daN
715 915 410 715 915 410d
Dimensions(mm)
Shape
170 400 100
450 1000 300
950 2000 600
1.19116.57 1.19116.65 1.19116.45
26 26 211450 3000 1000
1.11130.56 1.11130.65 1.11130.74 1.11130.50
32 32 22 30130 50 138
Type
GLR
Height h AirLoc / BiLoc Pad(mm) Article No.
max. loadper Jacmount daN
716 915 706 B1 716 915 B1706d1 d
Dimensions(mm)
Shape
2700 3000 2700 665
Jacmount Adjustable Levelers GLR for hollow studs
Jacmount Adjustable Levelers GLR to accomodate studs
1.11135.56 1.11135.65 1.11135.74 1.11135.50
1.11136.56 1.11136.65 1.11136.74 1.11136.50
32 32 22 30
32 32 22 30
135
136
26
32
37
43
138
138
Type
GLR
Height h AirLoc / BiLoc Pad(mm) Article No.
max. loadper Jacmount daN
716 915 706 B1 716 915 B1706d1 d2 d
Dimensions(mm)
Shape
2700 4500 2700 665
2700 4500 2700 665
Pad type
AirLoc / BiLoc 715 915 410
Other pad types upon request.For detailed technical information and natural frequencies, please see pages 4 - 5.
Sample order:Art. No. 1.19111.57 – GLRI 50 / 715
Jacmount Adjustable Levelers GLRI made of stainless steel 1.4301 INOXRecommended stud type S, stainless steel, INOX, to be selected separatly, see page 31.
Sample order:Art. No. 1.11135.56 – GLR 135 / 716
Pad type
AirLoc / BiLoc 716 915 706 B1
Other pad types upon request.For detailed technical information and natural frequencies, please see pages 4 - 5.
Standard color: Reseda green / RAL 6011
MEX (55) 53 63 23 31 QRO (442) 195 72 60MTY (81) 83 54 10 18 [email protected]. AUTORIZADO
11
Jacmount® Adjustable Levelers GLRN with exchangeable leveling sockets
1.1411*.56 1.1411*.65 1.1411*.74 1.1411*.50
1.1411*.56 1.1411*.65 1.1411*.74 1.1411*.50
1.1415*.56 1.1415*.65 1.1415*.74 1.1415*.50
1.1415*.56 1.1415*.65 1.1415*.74 1.1415*.50
1.1423*.56 1.1423*.65 1.1423*.74 1.1423*.50
1.1423*.56 1.1423*.65 1.1423*.74 1.1423*.50
42 42 32 40
49 49 39 47
44 44 34 42
51 51 41 49
50 50 40 48
57 57 47 55
110 - 113
114 - 117
150 - 153
154 - 157
230 - 233
234 - 237
121
121
162
162
248
248
Type
GLRN
Height h AirLoc / BiLoc Pad(mm) Article No.
max. loadper Jacmount daN
716 915 706 B1 716 915 B1706d
Dimensions(mm)
Shape
1500 3000 1500 350
1500 3000 1500 350
3100 5000 3100 750
3100 5000 3100 750
5000 5000 5000 1900
5000 5000 5000 1900
The advanced design and versatility of GLRN levelers make it possible to adapt individual isolation solutions to various machine and foundation conditions.
Jacmount Adjustable Levelers GLRN
Type 0
GLRN 110 / 150 / 230 Leveling Socketwith non-skid pad
Sample order:Art. No. 1.14110.56 – GLRN 110 / 716 (Leveling socket type 0)
i.e. an * in the article number means the type of leveling socket specified must be used.
Pad type
AirLoc / BiLoc 716 915 706 B1
Other pad types upon request.For detailed technical information and natural frequencies, please see pages 4 - 5.
Interchangeable Leveling Socket
Height adjustment range: - 0 / + 10 mm
Type 1
GLRN 111 / 151 / 231 Bolt-through25 mm diameter bore
Type 2
GLRN 112 / 152 / 232 with 90° countersink
Type 3
GLRN 113 / 153 / 233 neutral
Type 4
GLRN 114 / 154 / 234 Leveling Socketwith non-skid pad
Type 5
GLRN 115 / 155 / 235 Bolt-through23 mm diameter bore
Type 6
GLRN 116 / 156 / 236 with M20 inner thread
Type 7
GLRN 117 / 157 / 237 neutral
Standard color: Reseda green / RAL 6011
Height adjustment range: - 0 / + 13 mm
MEX (55) 53 63 23 31 QRO (442) 195 72 60MTY (81) 83 54 10 18 [email protected]. AUTORIZADO
Jacmount® Precision Adjustable Levelers PR, patentedExecution in cast ironReinforced Thermoplastic Design
12
Jacmount Precision Levelers PRExecution cast iron– Bolt-on, can be leveled from top or
bottom– Safe and stable due to patented studs– Machines run smoothly with AirLoc
/ BiLoc pads for any application– Stud is anchored in the PR leveler, but
not rigid
– Studs (type O-S, O-T and U) to be selected separately, see page 13
Type O, Levelers with studs made of high-gradespecial steel, hexagon on top. With leveling hexagon disk or self-locking.
1.13080.56 1.13080.65 1.13080.74 1.13080.50
1.13120.56 1.13120.65 1.13120.74 1.13120.50
1.13160.56 1.13160.65 1.13160.74 1.13160.50
1.13200.56 1.13200.65 1.13200.74 1.13200.50
1.13230.56 1.13230.65 1.13230.74 1.13230.50
37 37 27 35
47 47 37 45
50 50 40 48
52 52 42 50
57 57 47 55
80
120
160
200
230
83
118
165
195
248
Type
PR
Height h AirLoc / BiLoc Pad(mm) Article No.
max. loadper Jacmount daN
716 915 706 B1 716 915 B1706d
Dimensions(mm)
Shape
880 1500 880 220
1900 3000 1900 475
3500 3500 3500 850
3500 3500 3500 1250
6000 6000 6000 2000
Pad type
AirLoc / BiLoc 716 915 706 B1
Other pad types upon request.For detailed technical information and natural frequencies, please see pages 4 - 5.
Pad type
AirLoc / BiLoc 716 915 706 B1
Other pad types upon request.For detailed technical information and natural frequencies, please see pages 4 - 5.
1.13050.56 1.13050.65 1.13050.74 1.13050.50
1.13076.56 1.13076.65 1.13076.74 1.13076.50
-1.13115.65 1.13115.74
-
35 35 25 33
40 40 30 38
43 33
50
75-2
115
57
82
117
Type
PR
Height h AirLoc / BiLoc Pad(mm) Article No.
max. loadper Jacmount daN
716 915 706 B1 716 915 B1706d
Dimensions(mm)
Shape
100 100 100 100
500 500 500 220
- 500 500 -
Jacmount Precision Levelers PRReinforced Thermoplastic Design
Sample order:Art. No. 1.13050.56 – PR 50 / 716
– Bolt-on, can be leveled from top or bottom
– For fast mounting of light systems, etc.– Stud is anchored in the PR leveler, but
not rigid– Studs to be selected separately, please
see page 13
Sample order:Art. No. 1.13080.56 – PR 80 / 716
Standard color: Reseda green / RAL 6011
Type U, Levelers with special studs, hexagon on bottom.
Type O ± 4°
± 4°
Type U± 4°
± 4°
MEX (55) 53 63 23 31 QRO (442) 195 72 60MTY (81) 83 54 10 18 [email protected]. AUTORIZADO
13
Special Stud for Jacmount® Precision Leveler PRpatented
M 10 x 100M 10 x 150M 12 x 100M 12 x 150M 16 x 100M 16 x 150
M 16 x 100M 16 x 150M 18 x 150M 18 x 200M 20 x 150M 20 x 200M 24 x 150M 24 x 200
Dimensions (mm)
Ø x L SW ØL 1
7912979
12978
128
78128126176126176123173
for
212124243131
PR 75-2
PR 115
PR 120
PR 160
PR 200
7788
1010
1010131313131717
9.02102.02
9.02104.02
9.02122.02
9.02124.02
9.02162
9.02164
9.03162
9.03164
9.03184
9.03186
9.03204
9.03206
9.03244
9.03246
Article No.
Special Stud Type O, hexagon on top,made of high-grade special steel, zinc-platedComplete with self-locking collar (S) or leveling hexagon SW 46 (T),includes 1 nut and 1 washer.
M 10 x 100M 12 x 100M 16 x 100M 16 x 150M 20 x 150
PR 75-2PR 115PR 120PR 160PR 200
1717171722
717171
121118
9.04102.02
9.04122.02
9.04162
9.04164
9.04204
Ø x L SW Article No.L 1for
Self-locking collar (S)
M 10 x 100M 10 x 150M 12 x 100M 12 x 150
Dimensions (mm)
Ø x L SW
Self-locking collar (S)
L 1
8413484
134
for
21212424
PR 50
PR 80
7788
9.02102
9.02104
9.02122
9.02124
Article No.Ø
Size 1: Type O-1-S
Size 2: Type O-2-S resp. O-2-T
Dimensions (mm)
Size 2: Type U-2
M 10 x 100M 10 x 150M 12 x 100M 12 x 150
PR 50
PR 80
13131313
7912979
129
9.04102
9.04104
9.04122
9.04124
Ø x L SW Article No.L 1for
Dimensions (mm)
Size 1: Type U-1
M 20 x 150 PR 230 30 108 9.04204.03
Ø x L SW Article No.L 1for
Size 3: Type U-3
Sample order:Art. No. 9.02102Special stud O-1-S M 10 x 100orArt. No. 9.03162Special stud O-2-T M 16 x 100
Leveling hexagon SW 46 (T)
Article No.
Special stud Type U, hexagon on bottomof steel, zinc-platedincludes 1 nut and 1 washer.
Sample order:Art. No. 9.04102Special stud U-1 M 10 x 100
Type O
Type U
M 20 x 150M 20 x 200M 24 x 150M 24 x 200
Dimensions (mm)
Ø x L SW
Leveling hexagon SW 46 (T)
L 1
116166113163
for
PR 230
13131717
9.03204.03
9.03206.03
9.03244.03
9.03246.03
Article No.
Size 3: Type O-3-T
MEX (55) 53 63 23 31 QRO (442) 195 72 60MTY (81) 83 54 10 18 [email protected]. AUTORIZADO
aaaaaaaaaaaaaaaa14
Jacmount® Adjustable Levelers and Damping Elements PRGpatented, execution in cast iron
angle ±4°
h4 h2
Ø
h1
h3
SW
M20 / M24
Jacmount Adjustable Levelers andDamping Elements PRG(PRGI also available in INOX)These patented levelers are easy to mount.Studs are interchangeable and connectedto element bodies. Adjustable with studson floors with inclination up to ± 4°.
Sample order:Art. No. 1.16085.58 – PRG 85 / 705Art. No. 9.55102 – Special stud
G1 M10 x 100mm
14 / 18 / 40
Ø mm
Article No. 1.16085.58
1.16125.58
1.16170.58
1.16230.58
1.16085.73
1.16125.73
1.16170.73
1.16230.73
1.16085.43
9.55102 9.55122 9.551621
1.16125.43
1.16170.43
1.16230.43
14 / 18 / 41 17 / 21 / 49
705 905 405
Minimum installation height with AirLoc / BiLoc padStandard thread length: 100 mm = h1
max. load per Jacmount daNAirLoc / BiLoc Pad
Article No.
Article No.
Article No.
Type
PRG
9.552429.551622 9.55202
Dimensions (mm)
< AirLoc Pad 705 / 905
< BiLoc Pad 405
h2 / h3 / h4
M 10 M 12 M 16 M 16 M 20 M 24
h2 / h3 / h4 h2 / h3 / h4 h2 / h3 / h4 h2 / h3 / h4 h2 / h3 / h4
85
125
170
230
900 1350 450
2000 3000 1000
4000 4500 2000
6000 6000 3800
85
125
170
230
M 10 x 100SW 13
M 12 x 100SW 13
M16 x 100SW 17
M 16 x 100SW 19
M 20 x 100SW 22
M 24 x 100SW 24
17 / 24 / 52 17 / 27 / 63 20 / 31 / 74AirLoc Pad 705 / 905 >
BiLoc Pad 405 >
AirLoc Pad 705 / 905 >
BiLoc Pad 405 >
AirLoc Pad 705 / 905 >
BiLoc Pad 405 >
Article No.
Special Stud G
M 10, M 12, M 16 with 1 self-locking collar, 1 nut and 1 washer
M 20, M 24 with 2 nuts and 2 washers
G1 G2
17 / 24 / 52 17 / 27 / 63 20 / 31 / 74
17 / 25 / 53 17 / 28 / 64 20 / 31 / 74
M10 / M12 M16
Pad types705 Used in universal applications, high
adhesion and isolation coefficient905 For high loads and level stability, good
coefficient of adhesion405 Used mainly for application where a
high coefficient of adhesion is necessary
Pad type
AirLoc / BiLoc 705 905 405
Other pad types upon request.For detailed technical information and natural frequencies, please see pages 4 - 5.
Standard color: Silver gray / RAL 7001
MEX (55) 53 63 23 31 QRO (442) 195 72 60MTY (81) 83 54 10 18 [email protected]. AUTORIZADO
15
aaaaaaaaaaaaaaaaJacmount® Adjustable Levelers and Damping Elements PRGIpatented, of stainless steel 1.4301 INOX
– Optimal used with matching AirLoc / BiLoc pad (no profile: no dirt deposit)
– Especially suited for clean rooms, the food and pharmaceutical industry and special hygienic requirements.
Rust-resistant and acid-resistant high-qualitysteel elements 1.4435 available on request.
h4 h2
Ø
Jacmount Adjustable Levelers and Damping Elements PRGIof stainless steel 1.4301 INOXThese patented designs make mountingsimple. Element body and special stud are,once installed, connected with each otherand cannot be lost any longer. Adjustablewith studs on floors with inclination up to ± 4°.
angle ±4°
h1
h3
SW
14 / 23 / 47
Ø mm
Article No. 1.19141.57
1.19142.57
1.19144.57
1.19146.57
1.19141.65
1.19142.65
1.19144.65
1.19146.65
1.19141.45
1.19142.45
1.19144.45
1.19146.45
14 / 23 / 49 17 / 26 / 59
14 / 18 / 42 14 / 18 / 44 17 / 21 / 54
715 915 410
Minimum installation height with AirLoc / BiLoc padStandard thread length: 100 mm = h1
max. load per Jacmount daNAirLoc / BiLoc Pad
Article No.
Article No.
Article No.
Type
PRGI
Dimensions (mm)
< AirLoc Pad 715 / 915
< BiLoc Pad 410
h2 / h3 / h4
M 10 M 12 M 16 M 16 M 20 M 24
h2 / h3 / h4 h2 / h3 / h4 h2 / h3 / h4 h2 / h3 / h4 h2 / h3 / h4
50
70
100
120
170 400 100
450 1000 300
950 2000 600
1450 3000 1000
51
76
107
132
17 / 26 / 59 17 / 29 / 65 20 / 33 / 76
17 / 21 / 54 17 / 24 / 60 20 / 28 / 71
17 / 26 / 59 17 / 29 / 65 20 / 33 / 76
17 / 21 / 54 17 / 24 / 60 20 / 28 / 71
17 / 26 / 59 17 / 29 / 65 20 / 33 / 76
17 / 21 / 54 17 / 24 / 60 20 / 28 / 71
AirLoc Pad 715 / 915 >
BiLoc Pad 410 >
AirLoc Pad 715 / 915 >
BiLoc Pad 410 >
AirLoc Pad 715 / 915 >
BiLoc Pad 410 >
9.56102 9.56122 9.561621 9.562429.561622 9.56202
M 10 x 100SW 13
M 12 x 100SW 13
M16 x 100SW 17
M 16 x 100SW 19
M 20 x 100SW 22
M 24 x 100SW 24
Article No.
Special Stud G INOX
with 2 nuts and 2 washers
G1 INOX G2 INOX
Sample order:Art. No. 1.19141.57 – PRGI 50 / 715Art. No. 9.56102 – Special stud G1
INOX M10 x 100mm
Pad type
AirLoc / BiLoc 715 915 410
Other pad types upon request.For detailed technical information and natural frequencies, please see pages 4 - 5.
MEX (55) 53 63 23 31 QRO (442) 195 72 60MTY (81) 83 54 10 18 [email protected]. AUTORIZADO
16
Jacmount® Adjustable Levelers PRP and PRP VLeveling studs for PRP and PRP V
Adjustment range:- 0 + 20 mm (PRP 90)- 0 + 25 mm (PRP 120 - 300)
Jacmount Adjustable Levelers PRP and PRP V
Sample order: Art. No. 9.05123 Type R 1, M 12 x 1.5 x 125 mm
Leveling studs for PRP and PRP VType R 1 or R 2 Quality class 8.8, with hexagon on topSW 1 (R 1) or SW 2 (R 2), complete with 1 nut and 1 washer.
1.15091.48 1.15091.84
1.15090.48 1.15090.84
1.15120.48 1.15120.84 1.15127.74
50 55-
50 55-
50 55 50
90
90
120
160
200
250
300
101
101
123
168
205
260
305
Type
PRP
Height h unloadedBiLoc / AirLoc Pad
Article No.
max. loadper Jacmount daN
425 K-810 706 425 K-810 706Ø
Dimensions(mm)
500 1000 -
500 1000 -
750 1800 1800
1.15160.48 1.15160.84 1.15167.74
52 57 521500 3500 3500
1.15200.48 1.15200.84 1.15207.74
54 59 542000 5000 5300
1.15250.48 1.15250.84 1.15257.74
60 65 603500 8000 9000
M 12 x 1.5
M 16 x 1.5
M 16 x 1.5
M 20 x 1.5
M 24 x 2
M 24 x 2
1.15300.48 1.15300.84
65 70- 5000 10000 - M 30 x 2
Type
PRP V
Levelingstuds
Pad type
BiLoc / AirLoc 425 K810 706
Sample order:Art. No. 1.15091.48– PRP 90 / 425
425 Nibbling machines, rotary and screw compressors
K-810 Plastic, injection-molding machines, presses, automatic punches and in clean rooms
706 Special machinery
M 12 x 1.5 x 125
M 16 x 1.5 x 125M 16 x 1.5 x 175
M 20 x 1.5 x 125M 20 x 1.5 x 175
M 24 x 2 x 125M 24 x 2 x 175
M 30 x 2 x 125M 30 x 2 x 175
Dimensions (mm)
Ø x L SW 1 Article No.
Ideal for impact and vibration isolation plus:– wide adjustment range– non-skid– no floor anchoring– economical
Type R 1 Type R 2
L 1
113
111161
108158
104154
96146
for
9.05123
9.05163
9.05165
9.05203
9.05205
9.05243
9.05245
9.05303
9.05305
PRP 90
PRP 90PRP 120PRP 120 V
PRP 160PRP 160 V
PRP 200PRP 200 VPRP 250PRP 250 V
PRP 300
8
1010
1313
1717
2222
109
107157
104154
99149
91141
9.06123
9.06163
9.06165
9.06203
9.06205
9.06243
9.06245
9.06303
9.06305
13
1717
2424
2727
3636
SW 2 Article No.L 2
Airloc Spacer for PRP and PRP V, see page 32
± 4°
Standard color: Zinc yellow / RAL 1018
Type R 1 Type R 2
MEX (55) 53 63 23 31 QRO (442) 195 72 60MTY (81) 83 54 10 18 [email protected]. AUTORIZADO
17
1.12075.75 1.12075.50 1.12075.52
1.12110.75 1.12110.50 1.12110.52
1.12160.75 1.12160.50 1.12160.52
18 21 34
18 21 34
24 27 40
75
110
160
175
225
300
400
81
123
161
243
238
250
522
81
123
161
163
238
320
272
Type
GLP
Height h AirLoc / BiLoc Pad(mm) Article No.
max. loadper Jacmount daN
910 B1 B2 910 B1 B2L b d1
Dimensions(mm)
Shape
1000 150 150
2500 350 350
4500 600 600
1.12175.75 1.12175.50 1.12175.52
22 25 387000 1000 1000
1.12225.75 1.12225.50 1.12225.52
26 29 4210000 1500 1500
1.12300.75 1.12300.50 1.12300.52
33 36 4913600 2000 2000
1.12400.75 1.12400.50 1.12400.52
34 37 5024000 3500 3500
M 10
M 16
M 20
1.12079.75 1.12079.50 1.12079.52
1.12119.75 1.12119.50 1.12119.52
1.12169.75 1.12169.50 1.12169.52
20 23 36
20 23 36
26 29 42
75
110
160
175
225
300
400
81
123
161
243
238
250
522
81
123
161
163
238
320
272
Type
GLP-S
Height h AirLoc / BiLoc Pad(mm) Article No.
max. loadper Jacmount daN
910 B1 B2 910 B1 B2L b
Dimensions(mm)
Shape
1000 150 150
2500 350 350
4500 600 600
1.12179.75 1.12179.50 1.12179.52
24 27 407000 1000 1000
1.12229.75 1.12229.50 1.12229.52
28 31 4410000 1500 1500
1.12309.75 1.12309.50 1.12309.52
35 38 5113600 2000 2000
1.12409.75 1.12409.50 1.12409.52
36 39 5224000 3500 3500
Installation Elements GLPBolt-on to machine foot with stud P or freestanding with non-skid pad 903 on top(GLP-S).Suited for presses, stamping machines,guillotine shears and all impact machines.Low execution to allow for high stability.
Stud Types P, M 10, M 16, M 20 depending on size of element. Leveling with shims provided by customer.
Installation Elements GLP-SFreestanding with non-skid pad 903 on top.
Sample order:Art. No. 1.12079.75 – GLP-S 75 / 910
Sample order:Art. No. 1.12075.75 – GLP 75 / 910
Installation Elements GLP with stud type PInstallation Elements GLP-S
Standard color: Reseda green / RAL 6011
Pad type
AirLoc / BiLoc 910 B1 B2
MEX (55) 53 63 23 31 QRO (442) 195 72 60MTY (81) 83 54 10 18 [email protected]. AUTORIZADO
18
Wedgmount® Precision Levelers VRC- / VRKC-Compactand KSC- KSKC-Compact, patentedCompact-elastic connection between machine foot and foundation
AirLoc precision levelers available in the following models:
– freestanding– bolt-on– bolt-through– interlocking
10-VRC / NE
2006.1-VRC / 716
202-VRC / 915
2130-KSKC
3-VRC/ NK
2-VRC / NB
407-VRC / NA
MEX (55) 53 63 23 31 QRO (442) 195 72 60MTY (81) 83 54 10 18 [email protected]. AUTORIZADO
19
1.30001.56 1.30001.60 1.30001.65 1.30001.61
1.30002.56 1.30002.60 1.30002.65 1.30002.61
1.30003.56 1.30003.60 1.30003.65 1.30003.61
1.30004.56 1.30004.60 1.30004.65 1.30004.61
1.30006.56 1.30006.60 1.30006.65 1.30006.61
1.30007.56 1.30007.60 1.30007.65 1.30007.61
1.30302.56 1.30302.60 1.30302.65 1.30302.61
1.30303.56 1.30303.60 1.30303.65 1.30303.61
1.30306.56 1.30306.60 1.30306.65 1.30306.61
1.30406.56 1.30406.60 1.30406.65 1.30406.61
1.30407.56 1.30407.60 1.30407.65 1.30407.61
1.30410.56 1.30410.60 1.30410.65 1.30410.61
58 44 56 54
58 44 56 54
66 52 64 62
66 52 64 62
90 76 88 86
90 76 88 86
61 47 59 56
66 52 64 61
88 74 86 83
74 60 72 70
85 71 83 81
101 87 99 97
Wedgmount® Precision Levelers VRC-Compactpatentedfreestanding
VRC-Compact is the name of the AirLoclevelers with optimal characteristics. The outer and inner wedges always have an interlocking connection.– Fine adjustment under full load to
1/100 mm– Transverse stability due to pre-tensioned
wedges– Longitudinal stability due to concentric
locking– Space-saving, flat design made of cast
iron– Adjustable impact sound isolation of
solid-borne sound– Extensions to leveling screws upon request.
AirLoc
NA
NE
NK
NF
Top
706
903
903
903
Bottom
716
903
915
B1
Pad type
Other pad types upon request.For detailed technical information and natural frequencies, please see pages 4 - 5.
Applications please see page 7.
1-VRC
2-VRC
3-VRC
4-VRC
6-VRC
7-VRC
302-VRC
303-VRC
306-VRC
406-VRC
407-VRC
410-VRC
105
150
200
200
115
175
115
140
115
115
250
300
55
75
95
200
250
230
115
140
115
250
200
250
+ 2.5– 7
+ 5– 5
+ 6– 6
+ 6– 6
+ 6– 10
+ 8– 10
+ 4– 5
+ 6– 6
+ 8– 10
+ 5.5– 6
+ 11– 10
+ 11– 11
Type
VRC
Height h AirLoc Pad(mm) Article No.
Levelingrange(mm)
max. loadper Wegmount daN
NA NE NK NF NA NE NFNKL b
Dimensions(mm)
1100 2500 2000 250
2200 5000 4000 550
3700 7500 6500 1000
7800 14000 14000 2000
5500 8000 8000 1400
8000 10000 10000 2000
2500 4500 4500 625
3800 6500 6500 1000
2500 4000 4000 625
5500 8000 8000 1400
10000 16000 16000 2500
15000 25000 25000 3750
Applications:NA For machine tools, plastic machines,printing machines, textile machines and production machines of all kinds. Latest design, with superior isolation, damping and non-skid properties.NE For lathes, round and flat grinders, drills and milling machines, transfer linesand special machinery. Good level stabilitydue to increased Shore hardness, high stabi-lity under load and non-skid protection.NK High load, level stability, less isolation;for transfer lines, special machinery and machine tools.NF For low frequency, soft installation requirements in floors, also as passive isola-tion from building vibrations, machine andlaboratory instruments. Superior isolationwith high coefficient of adhesion.
Sample order:Art. No. 1.30001.56 – 1-VRC / NA
VRC freestanding
Standard color: Reseda green / RAL 6011
MEX (55) 53 63 23 31 QRO (442) 195 72 60MTY (81) 83 54 10 18 [email protected]. AUTORIZADO
20
Wedgmount® Precision Levelers VRC-Compactpatentedfreestanding
AirLoc VRC-Compact precision levelers arespecially suited for installation of largepresses and heavy machinery of all kinds.VRC types 10- and 11 also available in bolt-on and bolt-through models with sphericalseats (10.1-, 11.1-VRKC and 10.2-, 11.2-VRKC).The maximum load varies from 14 kN to1000 kN per leveler. Special properties ofthese heavy-duty levelers are:
– Fine adjustment under full load in1/100 mm range
– AirLoc’s high coefficient of adhesion guarantees non-skid protection
– Various mounting possibilities permit different levels of isolation efficiency
– Constant level stability guaranteed – Short adjustment times, flexible,
economical.
AirLoc
NA
NE
NK
NF
Top
706
903
903
903
Bottom
716
903
915
B1
Pad type
Other pad types upon request.For detailed technical information and natural frequencies, please see pages 4 - 5.
1.30005.56 1.30005.60 1.30005.65 1.30005.61
1.30008.56 1.30008.60 1.30008.65 1.30008.61
1.30010.56 1.30010.60 1.30010.65 1.30010.61
1.30011.56 1.30011.60 1.30011.65 1.30011.61
1.30012.56 1.30012.60 1.30012.65 1.30012.61
90 76 88 86
90 76 88 86
90 76 88 86
93 79 91 89
150 136 148 146
5-VRC
8-VRC
10-VRC
11-VRC
12-VRC
250
255
370
502
650
115
205
230
302
400
+ 8– 7
+ 8– 7
+ 13– 7
+ 12– 4
+ 16– 4
Type
VRC
Height h AirLoc Pad(mm) Article No.
Levelingrange(mm)
max. loadper Wegmount daN
NA NE NK NF NA NE NFNKL b
Dimensions(mm)
5500 9500 9500 1400
10000 15000 15000 2500
16800 25000 25000 4200
30000 50000 50000 7500
50000 100000 100000 13000
1.30106.56 1.30106.60 1.30106.65 1.30106.61
1.30112.56 1.30112.60 1.30112.65 1.30112.61
1.30124.56 1.30124.60 1.30124.65 1.30124.61
80 66 78 76
72 58 70 68
110 96 108 106
2006-VRC
2012-VRC
2024-VRC
160
200
250
115
120
160
+ 6– 6
+ 6– 6
+ 8– 7
Type
VRC
Height h AirLoc Pad(mm) Article No.
Levelingrange(mm)
max. loadper Wegmount daN
NA NE NK NF NA NE NFNKL b
Dimensions(mm)
3700 6000 6000 900
4800 9600 9600 1200
8000 16000 16000 2000
Sample order:Art. No. 1.30106.56 – 2006-VRC / NA
Freestanding VRC with eccentrical leveling spindle
Jumbo VRC freestanding
Sample order:Art. No. 1.30005.56 – 5-VRC / NA
Standard color: Reseda green / RAL 6011
MEX (55) 53 63 23 31 QRO (442) 195 72 60MTY (81) 83 54 10 18 [email protected]. AUTORIZADO
21
Wedgmount® Precision Levelers VRC-Compactpatentedbolt-on, recommended stud type P
Note:One stud is needed for each
precision leveler. Studs are tapped in the optimal position. This applies to bolt-on
and bolt-through levelers !
Pad type
AirLoc Bottom 716 915 903
Other pad types upon request.For detailed technical information and natural frequencies, please see pages 4 - 5.
202-VRC
203-VRC
204-VRC
205-VRC
206-VRC
115
140
170
180
205
115
140
170
230
230
27
57.5
70
68
90
90
M 16
Type
VRC
Height h AirLoc Pad(mm) Article No.
Levelingrange(mm)
max. loadper Wegmount daN
Dimensions (mm)
L b c a d1 716 915 903 716 915 903
M 20
1.31202.56 1.31202.65 1.31202.60
1.31203.56 1.31203.65 1.31203.60
1.31204.56 1.31204.65 1.31204.60
1.31205.56 1.31205.65 1.31205.60
1.31206.56 1.31206.65 1.31206.60
56 56 44
61 61 49
68 68 56
77 77 65
77 77 65
+ 5– 8
+ 6– 6
+ 4– 5
+ 9– 9
+ 9– 9
2500 4000 4000
3800 6000 6000
5500 8000 8000
8000
8000
12000
10000
12000
10000
Standard color: Reseda green / RAL 6011
407.1-VRC
410.1-VRC
250
300
200
250
125
143
32
41M 20M 24
M 16M 20M 24 1.31407.56 1.31407.65 1.31407.60
1.31410.56 1.31410.65 1.31410.60
96 96 84
80 80 68 + 11– 10
+ 11– 11
10000 16000 16000
15000 25000 25000
2006.1-VRC
2012.1-VRC
2024.1-VRC
160
200
250
115
120
160
57.5
60
80
80
100
125M 16M 20M 24
Type
VRC
Height h AirLoc Pad(mm) Article No.
Levelingrange(mm)
max. loadper Wegmount daN
Dimensions (mm)
L b c a d1 716 915 903 716 915 903
M 12M 16
1.31106.56 1.31106.65 1.31106.60
1.31112.56 1.31112.65 1.31112.60
1.31124.56 1.31124.65 1.31124.60
67 67 55
105 105 93
75 75 63 + 6– 6
+ 6– 6
3700 6000 6000
4800 9600 9600
+ 8– 7 8000 16000 16000
VRC bolt-on centrically
Plane top, for machines that must form aunit with the leveler. Freestanding towardsthe foundation, bolted onto the machinewith a stud.
Order separately: Stud type P, see page 31.
Applications:716 Best isolation and damping, good safety and non-skid protection. For machinetools in general.
915 High load and level stability, lower isolation.
903 For machines where level stability is a high requirement: drills, lathes, cleaning machines, injection-molding machines. Good level stability and standing safety.
VRC bolt-on
Sample order:Art. No. 1.31106.56 – 2006.1-VRC / 716
MEX (55) 53 63 23 31 QRO (442) 195 72 60MTY (81) 83 54 10 18 [email protected]. AUTORIZADO
22
VRKC with spherical seatbolt-on centrically
407.1-VRKC
410.1-VRKC
250
300
200
250
125
143
32
41M 20M 24
140
170
M 16M 20M 24 1.36407.56 1.36407.65 1.36407.60
1.36410.56 1.36410.65 1.36410.60
131 119
96 96 84 + 11– 10
+ 11– 11
10000 16000 16000
15000 25000 25000
Wedgmount® Precision Levelers VRKC-Compactpatentedbolt-on, with spherical seat, recommended stud type P
Standard color: Reseda green / RAL 6011
202-VRKC
203-VRKCV
204-VRKC
205-VRKC
206-VRKC
115
140
170
180
205
115
140
170
230
230
27
57.5
70
68
90
90
M 16
115
140
140
140
140
Type
VRKC
Height h AirLoc Pad(mm) Article No.
Levelingrange(mm)
max. loadper Wegmount daN
Dimensions (mm)
L b c a d1 d 716 915 903 716 915 903
M 20
1.36202.56 1.36202.65 1.36202.60
1.36243.56 1.36243.65 1.36243.60
1.36204.56 1.36204.65 1.36204.60
1.36205.56 1.36205.65 1.36205.60
1.36206.56 1.36206.65 1.36206.60
68 68 56
77 77 65
84 84 72
93 93 81
93 93 81
+ 5– 8
+ 6– 6
+ 4– 5
+ 9– 9
+ 9– 9
2500 4000 4000
3800 6000 6000
5500 8000 8000
8000
8000
12000
10000
20000
10000
For machine supports which are non-machined, sloping floors: Adjustment up to 30 guaranteed.
Sample order:Art. No. 1.36202.56 – 202-VRKC / 716
Pad type
AirLoc Bottom 716 915 903
Other pad types upon request.For detailed technical information and natural frequencies, please see pages 4 - 5.
VRKC with spherical seat, bolt-on
2006.1-VRKC
2012.1-VRKC
2024.1-VRKC
160
200
250
115
120
160
57.5
60
80
80
100
125
M 16M 20M 24
115
115
140
Type
VRKC
Height h AirLoc Pad(mm) Article No.
Levelingrange(mm)
max. loadper Wegmount daN
Dimensions (mm)
L b c a d1 d 716 915 903 716 915 903
M 12M 16
1.36106.56 1.36106.65 1.36106.60
1.36112.56 1.36112.65 1.36112.60
1.36124.56 1.36124.65 1.36124.60
79 79 67
121 121 109
87 87 75 + 6– 6
+ 6– 6
3700 6000 6000
4800 9600 9600
+ 8– 7 8000 16000 16000
For all levelers with spherical washer sets, we recommend using on top conical sockets and spherical disks.
Order separately: Stud type P, see page 31.Conical sockets and spherical disks.
Sample order:Art. No. 1.36106.56 – 2006.1-VRKC / 716
131
MEX (55) 53 63 23 31 QRO (442) 195 72 60MTY (81) 83 54 10 18 [email protected]. AUTORIZADO
23
Wedgmount® Precision Levelers VRC-Compactpatentedbolt-through, recommended stud type S or RGM
Pad type
AirLoc Bottom 716 915 903
center of gravity and high dynamic torque.Despite anchoring, there is an isolation effect, with the AirLoc stud system: disksprings, isolation washer and isolation tube. To find the right size leveler:– Divide machine weight by number of
supporting points to get the proportional machine load per leveler.
– Then select the size of the anchoring bolt(stud) and the pretension force of the disk springs.
Machined top, for machines that need tobe anchored to the floor, for example, machines with changing loads, unilateral
Isolating washers N 915 for 212-, 213-VRC,G 915 for 214 - 216-VRC are included. Fordimensions, see page 30.Order separately: Stud type S or RGM, on page 31.Disk springs, isolation tube, conical socketsand spherical seats.Anchoring is usually done with dowels, seepage 31.
Sample order:Art. No. 1.32106.56 – 2006.2-VRC / 716
Standard color: Reseda green / RAL 6011
212-VRC
213-VRC
214-VRC
215-VRC
216-VRC
115
140
170
180
205
115
140
170
230
230
27
57.5
70
68
90
90
22
Type
VRC
Height h AirLoc Pad(mm) Article No.
Levelingrange(mm)
max. loadper Wegmount daN
Dimensions (mm)
L b c a d1 716 915 903 716 915 903
26
1.32212.56 1.32212.65 1.32212.60
1.32213.56 1.32213.65 1.32213.60
1.32214.56 1.32214.65 1.32214.60
1.32215.56 1.32215.65 1.32215.60
1.32216.56 1.32216.65 1.32216.60
56 56 44
61 61 49
68 68 56
77 77 65
77 77 65
+ 5– 8
+ 6– 6
+ 4– 5
+ 9– 9
+ 9– 9
2500 4000 4000
3800 6000 6000
5500 8000 8000
8000
8000
12000
10000
12000
10000
407.2-VRC
410.2-VRC
250
300
200
250
125
143
32
41
28 1.32407.56 1.32407.65 1.32407.60
1.32410.56 1.32410.65 1.32410.60
96 96 84
80 80 68 + 11– 10
+ 11– 11
10000 16000 16000
15000 25000 25000
2006.2-VRC
2012.2-VRC
2024.2-VRC
160
200
250
115
120
160
57.5
60
80
80
100
125 27
Type
VRC
Height h AirLoc Pad(mm) Article No.
Levelingrange(mm)
max. loadper Wegmount daN
Dimensions (mm)
L b c a d1 716 915 903 716 915 903
20.51.32106.56 1.32106.65 1.32106.60
1.32112.56 1.32112.65 1.32112.60
1.32124.56 1.32124.65 1.32124.60
67 67 55
105 105 93
75 75 63 + 6– 6
+ 6– 6
3700 6000 6000
4800 9600 9600
+ 8– 7 8000 16000 16000
VRC bolt-through centrically
VRC bolt-through
MEX (55) 53 63 23 31 QRO (442) 195 72 60MTY (81) 83 54 10 18 [email protected]. AUTORIZADO
24
Wedgmount® Precision Levelers VRKC-Compactpatentedbolt-through, with spherical seat, recommended stud type S or RGM
VRKC with spherical seat bolt-through centrically
407.2-VRKC
410.2-VRKC
250
300
200
250
125
143
32
41
140
170
28 1.37407.56 1.37407.65 1.37407.60
1.37410.56 1.37410.65 1.37410.60
131 119
96 96 84 + 11– 10
+ 11– 11
10000 16000 16000
15000 25000 25000
Standard color: Reseda green / RAL 6011
212-VRKC
213-VRKCV
214-VRKC
215-VRKC
216-VRKC
115
140
170
180
205
115
140
170
230
230
27
57.5
70
68
90
90
22
115
140
140
140
140
Type
VRKC
Height h AirLoc Pad(mm) Article No.
Levelingrange(mm)
max. loadper Wegmount daN
Dimensions (mm)
L b c a d1 d 716 915 903 716 915 903
26
1.37212.56 1.37212.65 1.37212.60
1.37243.56 1.37243.65 1.37243.60
1.37214.56 1.37214.65 1.37214.60
1.37215.56 1.37215.65 1.37215.60
1.37216.56 1.37216.65 1.37216.60
68 68 56
77 77 65
84 84 72
93 93 81
93 93 81
+ 5– 8
+ 6– 6
+ 4– 5
+ 9– 9
+ 9– 9
2500 4000 4000
3800 6000 6000
5500 8000 8000
8000
8000
12000
10000
20000
10000
For machine supports which are non-machined, sloping floors: Adjustment up to 30 guaranteed.
Sample order:Art. No. 1.37212.56 – 212-VRKC / 716
Pad type
AirLoc Bottom 716 915 903
Other pad types upon request.For detailed technical information and natural frequencies, please see pages 4 - 5.
VRKC with spherical seat, bolt-through
2006.2-VRKC
2012.2-VRKC
2024.2-VRKC
160
200
250
115
120
160
57.5
60
80
80
100
125 27
115
115
140
Type
VRKC
Height h AirLoc Pad(mm) Article No.
Levelingrange(mm)
max. loadper Wegmount daN
Dimensions (mm)
L b c a d1 d 716 915 903 716 915 903
20.51.37106.56 1.37106.65 1.37106.60
1.37112.56 1.37112.65 1.37112.60
1.37124.56 1.37124.65 1.37124.60
79 79 67
121 121 109
87 87 75 + 6– 6
+ 6– 6
3700 6000 6000
4800 9600 9600
+ 8– 7 8000 16000 16000
For all levelers with spherical washer sets, we recommend using on top conical sockets and spherical disks.
Isolating washers N 915 for 212-, 213-VRKC, G 915 for 214 - 216-VRKC are included. For dimensions, see page 30.
Order separately: Stud type S or RGM, see page 31.Conical sockets, spherical disks, disk springs and isolation tube.
Sample order:Art. No. 1.37106.56 – 2006.2-VRKC / 716
131
MEX (55) 53 63 23 31 QRO (442) 195 72 60MTY (81) 83 54 10 18 [email protected]. AUTORIZADO
25
®KaBloc System Wegmount® 203.5V and 206.5, (pat.)for subsequent, rigid clamp anchoringbolt-on and/or bolt-through, with spherical seat
Standard color: Reseda green / RAL 6011
203.51V-KaBloc
203.52V-KaBloc
203.53V-KaBloc
203.54V-KaBloc
140
140
140
140
140
140
140
140
27
70
70
70
70
140
140
140
140
Type Height h (mm)AirLoc Pad
Levelingrange
Proportionalmachine load
daN
max. total load
daN
Dimensions (mm)
L b c a d* 903
1.34952.60
1.34953.60
1.34954.60
80
80
80
80
+ 6– 6
+ 6– 6
+ 6– 6
+ 6– 6
7000
7000
7000
7000
14000
14000
14000
14000
Bolt-on /bolt-throughd1 d2
Article No.
M 20 22
22 M 20
M 20 M 20
22 22
The decisive advantage of types 203.5Vand 206.5 is that they can be anchored after installation without disassembling or moving the machine.
* Also available with Ø 115 mm, see KaBloc leaflet.
KaBloc 203.5V with Spherical Seat,bolt-on and/or bolt-through
Pad type
AirLoc Bottom 903
For detailed technical information and natural frequencies, please see pages 4 - 5.
KaBloc 206.5 with Spherical Seat,bolt-on and/or bolt-through
1.34951.60
206.51-KaBloc
206.52-KaBloc
206.53-KaBloc
206.54-KaBloc
205
205
205
205
230
230
230
230
27
90
90
90
90
140
140
140
140
Type Height h (mm)AirLoc Pad
Levelingrange
Proportionalmachine load
daN
max. total load
daN
Dimensions (mm)
L b c a d 903
1.34652.60
1.34653.60
1.34654.60
96
96
96
96
+ 9– 9
+ 9– 9
+ 9– 9
+ 9– 9
12000
12000
12000
12000
24000
24000
24000
24000
Bolt-on /bolt-throughd1 d2
Article No.
M 20 26
26 M 20
M 20 M 20
26 26
1.34651.60
Sample order:Art. No. 1.34651.60 – 206.51-KaBloc
Order separately: Stud type P, S or RGM, see page 31.Spacer shim rings and end plates, see page 32.
In the past, machines were usually ancho-red for safety reasons. This requires preciseanchor positions, which take costly meas-urement or precise machine-seat templates. The 203.5V and 206.5 allow you to anchor a machine after installation is com-plete. In practice, this means an 80 - 90%reduction in anchoring, less planning timeand reduced assembly cost.
Brackets for subsequent anchoring,see page 33.
Sample order:Art. No. 1.34951.60 – 203.51V-KaBloc
MEX (55) 53 63 23 31 QRO (442) 195 72 60MTY (81) 83 54 10 18 [email protected]. AUTORIZADO
26
KSC bolt-through, rigid clampKSC / KSKC Wedgmount Precision Levelers are recommend-ed for all machines where the reinforcing effect of the foundation is essential. For heavy machines and those requiring alignment on different axes.– For changing loads and high dynamic movement within
the machine– Drilling and milling machines, long plainer machines,
unique machines– Optimal rigid connection between machine and
foundation
Order separately: Stud type S or RGM, see page 31.Anchoring is usually done with dowels; seepage 31.
KSC Wedgmount Presicion Levelers have no AirLoc pads.
Sample order:Art. No. 1.42212 – 2120-KSC
2120-KSC
2130-KSC
2140-KSC
2150-KSC
2160-KSC
115
140
170
180
205
115
140
170
230
230
27
57.5
70
68
90
90
22
Type
KSC
Height (mm)Article No.
Levelingrange(mm)
Proportionalmachine
load
max.total load
Dimensions (mm)
L b c a d1 h
26
1.42212
1.42213
1.42214
1.42215
1.42216
41
46
53
62
62
+ 5– 8
+ 6– 6
+ 4– 5
+ 9– 9
+ 9– 9
5000 10000
7000 14000
8000 16000
12000
10000
24000
20000
Wedgmount® Precision Levelers and Rigid Clamp System KSC-Compact, patentedbolt-through, pre-leveling plate on request
Standard color: Reseda green / RAL 6011
Sample order:Art. No. 1.42106 – 2006-KSC
2006-KSC
2012-KSC
2024-KSC
160
200
250
115
120
160
80
100
125
57.5
60
80
20.5
Type
KSC
Height (mm)Article No.
Levelingrange(mm)
Proportionalmachine
load
max.total load
Dimensions (mm)
L b c a d1 h
27
1.42106
1.42112
1.42124
60
52
90 + 8– 7
+ 6– 6
+ 6– 6 6000 12000
12000 24000
24000 48000
KSC bolt-through centricallyrigid clamp
Cast pre-leveling plates VPare a must for uneven floors.
VP 2120
VP 2130
VP 2140
VP 2160
VP 2150
Pre-levelingplates
VP 2006
VP 2012
VP 2024
Pre-levelingplates
Shrink-free concrete or epoxy
mm
daN daN Article No.
1.49212
1.49213
1.49214
1.49215
1.49215
daN daN Article No.
1.49106
1.49112
1.49124
MEX (55) 53 63 23 31 QRO (442) 195 72 60MTY (81) 83 54 10 18 [email protected]. AUTORIZADO
27
Wedgmount® Precision Levelers and Rigid Clamp System KSKC-Compact, patentedbolt-through, with spherical seat, pre-leveling plate on request
Sample order:Art. No. 1.47212 – 2120-KSKC
2120-KSKC
2130-KSKCV
2140-KSKC
2150-KSKC
2160-KSKC
115
140
170
180
205
115
140
170
230
230
27
57.5
70
68
90
90
22
115
140
140
140
140
Type
KSKC
Height (mm)Article No.
Levelingrange(mm)
Proportionalmachine
load
max.total load
Dimensions (mm)
L b c a d1 d h
26
1.47212
1.47213.1
1.47214
1.47215
1.47216
53
62
69
78
78
+ 5– 8
+ 6– 6
+ 4– 5
+ 9– 9
+ 9– 9
5000 10000
7000 14000
8000 16000
12000
10000
24000
20000
KSKC with spherical seat bolt-through, rigid clampWith a spherical seat, you are independent of:– foundation level– deformation due to creeping and shrinking
of concrete– surface quality of foundationOrder separately: Stud type S or RGM, see page 31.Conical socket and spherical disk.Anchoring is usually done with dowels, see page 31.
Standard color: Reseda green / RAL 6011
2006-KSKC
2012-KSKC
2024-KSKC
160
200
250
115
120
160
80
100
125
57.5
60
80
20.5
115
115
140
Type
KSKC
Height (mm)Article No.
Levelingrange(mm)
Proportionalmachine
load
max.total load
Dimensions (mm)
L b c a d1 d h
27
1.47106
1.47112
1.47124
72
64
106 + 8– 7
+ 6– 6
+ 6– 6 6000 12000
12000 24000
24000 48000
KSKC with spherical seat bolt-through centrically, rigid clamp
Sample order:Art. No. 1.47106 – 2006-KSKC
Pre-leveling plates:Recommended for high-precision machineadjustment.
Shrink-free concrete or epoxy
mm
KSKC Wedgmount Presicion Levelers have no AirLoc pads.
Cast pre-leveling plates VPare a must for uneven floors.
Pre-levelingplates
Pre-levelingplates
VP 2120
VP 2130
VP 2140
VP 2160
VP 2150
daN daN Article No.
1.49212
1.49213
1.49214
1.49215
1.49215
VP 2006
VP 2012
VP 2024
daN daN Article No.
1.49106
1.49112
1.49124
MEX (55) 53 63 23 31 QRO (442) 195 72 60MTY (81) 83 54 10 18 [email protected]. AUTORIZADO
Standard color: Reseda green / RAL 6011
Horizontal Wedgmount Precision Leveler VC-Compact with double safety key
VC / NL
VC / NN
300
300
90
110
Type
VCLeveling
range(mm)
max. loadper Wegmount
daN
Dimensions (mm)
LArticle No.
- 0+ 9.5
- 0+ 9.5
b
100
100
h
10000
6000
1.94200.66
1.94200.68
AirLoc pad type an both
sides
915
725
Sample order:Art. No. 1.94200.66 – VC / NL
Horizontal Support HZA
For the absorption of dynamic horizontalforces.
consisting of:
1 Angle support W21 Element
B 80-2 / 9151 Special stud O-2
M 18 x 1002 Nuts M 182 Washers2 Chemical anchors
RM 16 (bore dia. 18x125)
2 Studs RGM 16 x 190 incl.
4 Nuts M 162 Washers
Sample order:Art. No. 1.94102.65HZA-W2, B80-2 / 915
Type HZA-W2, B 80-2 / 915max. load 2500 daN
consisting of:
1 Angle support L23 Heavy-duty dowels
M 24(Fischer or Hilti)(bore dia. 35x140)
3 Studs M 24 x 2003 Nuts M 243 Washers
Sample order:Art. No. 1.941321HZA-L2 kpl.
Type HZA-L2for Horizontal Wedgmount Precision Leveler VC, max. load 10 000 daN
Pad type
AirLoc 915
28
Horizontal Wedgmount® Precision Levelers VC-Compact, patentedHorizontal Supports HZA
Standard color: Reseda green / RAL 6011
High load support to absorb and isolatelarge horizontal impact forces.
For friction spindle presses, forging machi-nes and installations which are in need ofhorizontal fixation and isolation.
AirLoc
NL
NN
Top
915
725
Bottom
915
725
Pad type
MEX (55) 53 63 23 31 QRO (442) 195 72 60MTY (81) 83 54 10 18 [email protected]. AUTORIZADO
29
Standard color: Reseda green / RAL 6011
Horizontal Supports HZA
consisting of:
1 Angle support W41 Element
B 80-2 / 9151 Special stud O-2
M 24 x 1502 Nuts M 242 Washers2 Chemical anchors
RM 20 (bore dia. 25x170)
2 Studs RGM 20 x 260 incl.
4 Nuts M 202 Washers
Sample order:Art. No. 1.94104.65HZA-W4, B80-2 / 915
Type HZA-W4, B 80-2 / 915max. load 4000 daN
consisting of:
1 Angle support W61 Element
GLV 175 / 9151 Stud type S,
M 24 x 150 incl.2 Nuts M 242 Washers4 Heavy-duty dowels
M 20(Fischer or Hilti)(bore dia. 30 x120)
4 Studs type SM 20 x 150
4 Nuts M 204 Washers
Sample order:Art. No. 1.94106.65HZAE-W6,GLV 175 / 915
Type HZAE-W6, GLV 175 / 915max. load 10000 daN
consisting of:
Guide tube with pressure-distribution plateSteel support H5Element GLV 115 / 915with pins2 Studs assemblies
M 18 x 1402 Nuts M 18
Sample order:Art. No. 1.94054.65HZA-H5,GLV 115 / 915
Type HZA-H5, GLV 115 / 915max. load 4000 daN
consisting of:
Guide tube with 2 pressure-distribution platesSteel support H7Element GLV 165 / 915with pins2 Stud assemblies
M 18 x 1402 Nuts M 18
Sample order:Art. No. 1.94075.65HZA-H7,GLV 165 / 915
Type HZA-H7, GLV 165 / 915max. load 6000 daN
Pad type
AirLoc 915
For the absorption of dynamic horizontalforces.
MEX (55) 53 63 23 31 QRO (442) 195 72 60MTY (81) 83 54 10 18 [email protected]. AUTORIZADO
30
Mounting Wedgmount® Precision Leveler MSC-Compact, patentedIsolation WashersWidth Across Flats of Leveling Bolts for Wedgmount® Precision Leveler
Standard color: Reseda green / RAL 6011
Mounting Wedgmount MSC The main purpose of the mounting shoes is to take over heavy machines or machinegroups from the crane or other handlingequipment.The equipment can be easily aligned on themachined surface of the mounting shoes inthe X and Y axis. Then the machine is low-ered on the definite AirLoc WedgmountPrecisions Levelers and leveling in the Z-axiscan be done.
The machine is now firmly placed thanks to the high coefficient of adhesion of theAirLoc pad and operation can commence.
Mounting Wedgmount Precison Levelers MSC have no AirLoc pads.
– Large leveling range
* only outer hexagon
10-MSC
20-MSC
130
150
80
110
Type
MSC Levelingrange
max. load per Wegmount daN
Dimensions (mm)
LArticle No.
+ 10– 10
+ 14– 15
b
62
83
Heighth
10000
20000
1.90010
1.90020
Bolt lengthp
Width AcrossFlats SW
181
220
19 *
17 / 30
Sample order:Art. No. 1.90010 – 10-MSC
F 905
N915
G915
H915
J 915
K915
L 915
M915
M 10 / M 12
M 16 / M 18 / M 20
M 20 / M 22 / M 24
M 20 / M 22 / M 24
M 27 / M 30 / M 36
M 39 / M 42 / M 48
M 52 / M 56 / M 60
M 76 / M 80 / M 84
40
60
70
80
110
160
180
200
13
22
26
26
39
51
62
90
13
22
25
25
38
50
62
87
8
17
17
19
22
24
24
45
9.20040.73
9.20060.65
9.20070.65
9.20080.65
9.20110.65
9.20160.65
9.20180.65
9.20200.65
Type
D d d 1 h
ArticleNo.
fits stud Dimensions (mm)
Isolation washerstogether with anchoring bolt (stud), disk springs, isolation tube form the AirLocanchoring system for bolt-through AirLocWedgmount Precision Levelers.
TypeN 915 / G 915 / H 915
TypeF 905 / J 915 / K 915 L 915 / M 915
1-VRC2-VRC3-VRC4-VRC5-VRC6-VRC7-VRC8-VRC
10-VRC11-VRC12-VRC
302-/ 303-/ 306- & 406-VRC407-VR(K)C410-VR(K)C
202-/ 212-VR(K)C & 2120 KS(K)C203-/ 213-VR(K)C & 2130 KS(K)C
203-VRKCV & 2130-KSKCV 204-/ 214-VR(K)C & 2140 KS(K)C205-/ 215-VR(K)C & 2150 KS(K)C206-/ 216-VR(K)C & 2160 KS(K)C
2006- & 2012-VR(K)C / KS(K)C2024-VR(K)C / KS(K)C
203.5V-KaBloc206.5-KaBloc
10-MSC20-MSC
6101212-
1417----
12--
101212121717--
1217-
17
1319222214273014191924222730192222223030192722301930
Type Width across flats(mm)
inside outside
Width across flats of leveling bolts for Wedgmount Precision Levelers
Sample order:Art. No. 9.20040.73 – F 905
MEX (55) 53 63 23 31 QRO (442) 195 72 60MTY (81) 83 54 10 18 [email protected]. AUTORIZADO
31
Studs type S, type P Heavy Duty Dowel SL Chemical Dowel RM, Stud RGM
Heavy Duty Dowel SLPermissible pull-out loads (break-ing loads) for one dowel withthe required distances from ed-ge and axes and concrete com-pressive strength B25. Reducedadmissible loads due to reducedspacing in acc. with instructionsfrom the manufacturer.
Chemical Dowel RM and Stud RGMcomplete, with 1 nut and 1 washerPermissible loads for one dowel with therequired distances from edge and axes andconcrete compressive strength B25. Reduced admissible loads due to reducedspacing in acc. with instructions from themanufacturer.
Studs type S complete, with 2 nuts and 2 washers, for JacmountAdjustable Levelers GLV, GLR and bolt-through Wedgmount Precision Levelers. Studs can be combined with each Jacmount andbolt-through Wedgmount Precision Leveler.
Sample order:Art. No. 9.00101 Stud type S, M10x75
Studs type P complete,with 2 nuts and 2 washers,for Jacmount AdjustableLevelers GLP and bolt-onWedgmount Precision Levelers.
M 10 x 125
M 12 x 125
M 16 x 150
M 16 x 200
M 20 x 150
M 20 x 200
M 24 x 200
M 30 x 200
GLP 75
2006.1-VR(K)C, 2012.1-VR(K)C
202-VR(K)C, 203-VRC, 203-VRKCV
407.1-VR(K)C
2006.1-VR(K)C, 2012.1-VR(K)C, 2024.1-VR(K)C
GLP-110, GLP-160, GLP-175
203.5V-KaBloc, 206.5-KaBloc
204-VR(K)C, 205-VR(K)C, 206-VR(K)C
407.1-VR(K)C, 410.1-VR(K)C
2024.1-VR(K)C, GLP 225, GLP 300, GLP 400
10.1-VRKC, 11.1-VRKC
407.1-VR(K)C, 410.1-VR(K)C, 2024.1-VR(K)C
2024.1-VR(K)C-Z
7
8
10
10
13
13
17
19
9.01103
9.01123
9.01164
9.01166
9.01204
9.01206
9.01246
9.01306
Ø x L SW Article No. Stud type P for
Dimensions (mm)
Type Bore holedia.
Holedepth
Extractionforces
Chemical dowel RM (Dimensions in mm) Stud RGM (Dimensions in mm)
RM 10
RM 12
RM 16
RM 20
RM 24
202590
120170133598
14865
10515520565
9.43103
9.43125
9.43126
9.43127
9.43128
9.43165
9.43166
9.43167
9.43168
9.43207
9.43208
9.43209
9.43210
9.43248
Ø x L Article No.
max. effectivelength
12
14
18
25
28
90
110
125
170
210
7 kN
10 kN
15 kN
27 kN
37 kN
10 x 13012 x 16012 x 22012 x 25012 x 30016 x 16516 x 19016 x 25016 x 30020 x 26020 x 30020 x 35020 x 40024 x 300
Article No.
9.42010
9.42012
9.42016
9.42020
9.42024
DowelSL
Bore holedia.
min. Borehole depth
Length ofdowel
Extractionforces
M 10M 12M 16M 20M 24
9.41010
9.41012
9.41016
9.41020
9.41024
Article No.
1618243035
7085
100 120 140
607590
110125
3.5 kN5.4 kN7.3 kN8.1 kN
16.0 kN
M 10 x 75M 10 x 100*M 12 x 100*M 12 x 125M 12 x 150M 14 x 100M 14 x 125M 14 x 150M 16 x 100*M 16 x 125M 16 x 150*M 16 x 200*M 16 x 300M 20 x 100*M 20 x 125M 20 x 150*M 20 x 200*M 20 x 300M 24 x 150*M 24 x 200*M 24 x 250*M 24 x 300M 30 x 200
7
8
10
10
13
17
19
9.00101
9.00102
9.00122
9.00123
9.00124
9.00142
9.00143
9.00144
9.00162
9.00163
9.00164
9.00166
9.00168
9.00202
9.00203
9.00204
9.00206
9.00208
9.00244
9.00246
9.00247
9.00248
9.00306
Ø x L (mm) SW Article No.
Standardsteel, zinc-plated*also available in INOX 1.4301
Sample order: Art. No. 9.01103 – Stud type P, M10 x 125
Sample order: Art. No. 9.41010 – Heavy Duty Dowel SL, M10
Sample order:Art. No. 9.42010
Chemical dowel RM 10 Art. No. 9.43103
Stud RGM 10 x 130
With hexagon on top.Special lengths availableupon request, in simpli-fied version.
RM chemical dowels are available in different sizes of packages.
Dimensions in mm
MEX (55) 53 63 23 31 QRO (442) 195 72 60MTY (81) 83 54 10 18 [email protected]. AUTORIZADO
®AirLoc Spacer and AirLoc Top Platefor Wedgmount® Precision Levelers VRKC, KSKC and ®KaBloc, non-skidand for Jacmount® Adjustable Levelers PRP, PRP V
for Wedgmounts
203-VRKCV, 213-VRKCV, 204-VRKC, 205-VRKC206-VRKC, 214-VRKC, 215-VRKC, 216-VRKC
2130-VRKCV, 2140-KSKC, 2150-KSKC, 2160-KSKC2024.1-VRKC, 2024.2-VRKC, 2024-KSKC
407.1-VRKC, 407.2-VRKC203.5V-KaBloc, 206.5-KaBloc
ø
9.33115.06
9.33115.12
9.33115.18
9.33115.22
9.33115.32
9.33140.06
9.33140.12
9.33140.18
9.33140.22
9.33140.32
Article No.
6
12
18
22
32
6
12
18
22
32
h
115
140
202-VRKC, 212-VRKC2120-KSKC
2006.1-VRKC, 2006.2-VRKC, 2006-KSKC2012.1-VRKC, 2012.2-VRKC, 2012-KSKC
for Wedgmounts
203-VRKCV, 213-VRKCV, 204-VRKC, 205-VRKC206-VRKC, 214-VRKC, 215-VRKC, 216-VRKC
2130-VRKCV, 2140-KSKC, 2150-KSKC, 2160-KSKC2024.1-VRKC, 2024.2-VRKC, 2024-KSKC
407.1-VRKC, 407.2-VRKC203.5V-KaBloc, 206.5-KaBloc
ø
h 7
Height
115 202-VRKC, 212-VRKC2120-KSKC
2006.1-VRKC, 2006.2-VRKC, 2006-KSKC2012.1-VRKC, 2012.2-VRKC, 2012-KSKC
115
9.33115.90
9.33115.94
9.33140.94
9.33140.90
140
140
executionArticle No.
steel
h110
AirLocpad 904
h7
steel
h110
AirLocpad 904
Top Plate to be used with Spacer,for Wedgmount Precision Levelers
Sample order:Art. No. 9.33115.90Top plate steel ø 115 x 7 mm
steel with 904
Dimensions (mm)
Application: For shimming machines on uneven floors, for all machines and installations,bolt-on or bolt-through, and all-over freestanding.
32
for Jacmountsø
9.35101.09
9.35101.15
9.35151.09
9.35151.15
9.35181.09
9.35181.15
Article No.
9
15
9
15
9
15
h
100
180
9
9
11
11
13
13
r
18
18
22
22
26
26
w
PRP 120, PRP 120 V
PRP 160, PRP 160 V
PRP 200 / 250, PRP 200 V / 250 V
150
w
h
r
Spacer for Jacmount Adjustable Levelers PRP, PRP V
Sample order:Art. No. 9.33115.06Spacer ø 115 x 6 mm
Sample order:Art. No. 9.35101.09 Spacer ø 100 x 9 mm
Spacer for Wedgmount Precision Levelers
with 904
MEX (55) 53 63 23 31 QRO (442) 195 72 60MTY (81) 83 54 10 18 [email protected]. AUTORIZADO
33
KaBloc Brackets for Wedgmount Precision Levelers type 203.5V and 206.5
Bracket-Set AP 3Vertical holding down force = 20 kNconsisting of:– 2 Brackets AP 3– 2 Fixing screws– 1 Bracket stretcher with 2 nuts M 12– 2 Spherical washer sets M 20– 2 Chemical dowels RM 20– 2 Studs RG
M 20 x 260 mm, compl.Art. No. 1.34903
for anchoringwith M 20
Bracket-Set AP 7(Antislipping device)consisting of:– 2 Angle irons with through bore AP 7– 2 Fixing screws– 2 Chemical dowels RM 16– 2 Studs RG
M 16 x 165 mm, compl.Art. No. 1.34907
for anchoringwith M 16
Bracket-Set AP 4Vertical holding down force = 20 kNconsisting of:– 2 Brackets AP 4– 2 Fixing screws– 1 Bracket stretcher with 2 nuts M 12– 2 Spherical washer sets M 20– 2 Chemical dowels RM 20– 2 Studs RG
M 20 x 260 mm, compl.Art. No.: 1.34904
for anchoringwith M 20
Bracket-Set AP 7(Antislipping device)consisting of:– 2 Angle irons with through bore AP 7– 2 Fixing screws– 2 Chemical dowels RM 16– 2 Studs RG
M 16 x 165 mm, compl.Art. No. 1.34907
Bracket-Set AP 4Vertical holding down force = 25 kNconsisting of:– 2 Brackets AP 4– 2 Fixing screws– 1 Bracket stretcher with 2 nuts M 12– 2 Spherical washer sets M 20– 2 Chemical dowels RM 20– 2 Studs RG
M 20 x 260 mm, compl.Art. No. 1.34914
for anchoringwith M 20
for anchoringwith M 16
Bracket-Set AP 3Vertical holding down force = 25 kNconsisting of:– 2 Brackets AP 3– 2 Fixing screws with distance sleeves– 1 Bracket stretcher with 2 nuts M 12– 2 Spherical washer sets M 20– 2 Chemical dowels RM 20– 2 Studs RG
M 20 x 260 mm, compl.Art. No.: 1.34913
for anchoringwith M 20
for ®KaBloc 203.5V
for ®KaBloc 206.5
For subsequent rigid clamping the following brackets are available:
Standard color: Reseda green / RAL 6011
MEX (55) 53 63 23 31 QRO (442) 195 72 60MTY (81) 83 54 10 18 [email protected]. AUTORIZADO
34
Some of our OEM customers
Reishauer
Kellenberger
Mägerle
Müller Frick
Ferag
Husky
Finn-Power
MEX (55) 53 63 23 31 QRO (442) 195 72 60MTY (81) 83 54 10 18 [email protected]. AUTORIZADO
35
Sulzer (Photo Sulzer Textil)
König & Bauer-Albert
Rovetta
Osterwalder
Milacron
MEX (55) 53 63 23 31 QRO (442) 195 72 60MTY (81) 83 54 10 18 [email protected]. AUTORIZADO
Vibration Engineering – Recognized Worldwide
AirLoc, BiLoc, TriLoc, KombiRoc, TRAP-SOUND, KaBloc, Wedgmount, Jacmount and the profile designs of vibration isolation pads are registered trademarks.
Prin
ted
in S
wit
zerl
and
12/
2001
/e –
Co
pyr
igh
t: A
irLo
c Sc
hre
pfe
r Lt
d.,C
H-8
700
Kü
snac
ht
– Te
chn
. alt
erat
ion
s ar
e su
bje
ct t
o c
han
ge
wit
ho
ut
pri
or
no
tice
.
certified
QM-System
ISO 9001
AirLoc the complete isolationand leveling system
AirLoc the best connection betweenmachine and foundation
AirLoc often imitated, but neverreached!
AirLoc Range with naturalfrequencies from 15 - 100 Hz
BiLoc Range with naturalfrequencies from 6 - 20 Hz
TriLoc Isolations with naturalfrequencies from 3 - 8 Hz
Our Engineering Service:– Emission and immission measurement with
FFT-analysers, frequency analysis. Determination of natural frequency of ceilings.
– Niveau-measurements of ceilings, foundations, machines etc. with laser equipment.
– Foundation and slab isolation design and installation.
– Dynamometer measurements.
Foundation-IsolationsPlease ask for the Special Brochure.
Earth Quake Safety Equipment
Construction-AcousticsPlease ask for our Special Documentation TRAP-SOUND® .
A Division of Clark-Cutler-McDermott Company5 Fisher StreetP.O. Box 269Franklin, MA 02038 USA
Telephone 508-528-0022MA 1 800-649-8040
USA 1 800-922-3019FAX 508-528-7555
Email airloc.com