© 2015 VIBES Corp Page 1

VIBES Corp is a SPECTRUM INSTRUMENTS

Agent

Contact us to purchase

the products in this catalog: info@vibescorp.ca

tel 604-619-9381

fax 604-738-4080

 

© 2015 VIBES Corp Page 2

IntroductiontoVIBES CorpTM Formerly: Industrial Balancing Ltd. (Est. 1967 Calgary, AB) & Fan Doctor Canada Inc. (Est. 1982 Calgary, AB).

Why work with us? Serving Canadians for over 50 Years. VIBES Corp's reputation was built and established on thousands of promises fulfilled over 50 years in business across Canada. Superior quality service, sales and training courses provided on the intelligent specialist level has been the standard and always will be since our vibration and balancing business was formed in Calgary, AB, in 1982. (Formerly Industrial Balancing Ltd. Est. 1967) In the final real-time analysis VIBES Corp will deliver more value and peace of mind.

What do we do? Vibration Analysis, Dynamic Balancing, Laser Alignment & Permanent Solutions. Specializing on HVAC/R & Industrial Machines such as Fans, Blowers, Cooling Towers, Compressors, Pumps, Electric Motors, Production Rotors, Engine & PTO Drives, etc. Factory trained on FlaktWoods Varofoils and Aerofoils, Sheldons Axico, Aerovent, Novenco, New York Blower, Chicago Blower, Canadian/Buffalo Blower, CML Northern Blower, Joy Axivane, Twin City, Alphair, Allied Blower, Markhot Varivane, Loren Cook, BAC, Evapco, Marley, Hoffman, Spencer, Baldor, Reliance, Trane, Carrier, Frick, Eng.Air, Haakon, WEG, Leeson, GEC, GE, Emerson, Westinghouse, Toshiba, Siemens, Delhi, Penn, Acme, Armstrong, Westcan Pumps, Bell & Gossett, Mycom, Vilter, misc. pumps and most types of rotating, diesel engines & reciprocating machinery.

What do we sell, supply, install & service? WEG Motors, misc. motors & drives CoolBlueTM - Inductive Absorbers & Chokes = VFD any motor shaft current bearing damage protection EASY LASER - Shaft Alignment Systems METALON synthetic grease CTM - Cooling Tower Maintenance Parts & Services for all makes & types Vibration isolation & control, measurement, recording, alarm & shutdown. We represent: BALMAC, LO-REZ, MEGGITT, MURPHY,

SPECTRUM-INSTRUMENTS, WILCOXON, misc. Factory replacement fans, blowers, pumps & motors, customized rotors - new or re-manufacture SPANCO Gantry Cranes, KITO Chain Hoists and Trolleys Drive systems and parts: bearings, sheaves, couplings, belts, misc. Please visit www.vibescorp.ca to view more information and purchase products

The machinery under our professional health care programs = VIBES-GUARD PdM ProgramsTM are treated as if our own. We use proven technologies and methodologies along with our multi-technical and electro-mechanical (VIV, ASD, VPM, CPM, VFD, EIBD, EDM, Shaft Currents, etc.) State of the art instruments & precision tools, training, skills, and experiences for total overall analysis and evaluations. When the total analyzed facts about a machine, motor or engine are known we formulate a true condition report and recommend the best possible solutions. We work with clients to organize necessary actions in order of urgency or budgets. In some cases we employ professional engineering firms to help us solve critical analysis issues such as: Lubrication SEM studies, Ultra Sound or Magnetic Particle, Motor Electrical Analysis, VFD Electrical Discharge Rogowski Coil Test, misc.

Who have we worked with? VIBES Corp service capabilities have been used and accepted by high-ranking officials in: other service companies manufacturing & food processing engineering firms universities colleges hospitals cold storage

power plants & dams sewage & water treatment plants government infrastructure facilities oil & gas biogas energy systems transportation & construction commercial towers

agricultural mining ski hills marine terminal cranes,

cruise & container ships, tug boats, navy vessels & yachts

asphalt & cement

saw mills pulp & paper research & development machining / fabrication chemical plants restaurants skytrain tunnels

We take due diligence to the highest level on all projects regardless of size or budget.

 

© 2015 VIBES Corp Page 3

Do we offer training? VIBES Corp represents and offers training courses in technologies and quality products that we use, are industry-trusted and relate to improved machinery, engine, electric motors health and performance, energy savings and preventative maintenance. Examples: Vibration Monitoring & Trending

Laser Shaft Alignment Fan & Motor Maintenance Training Update International (Vibration Analyst Certification ASNT Level 1, 2 & 3) On Site & On line Courses Bearing Maintenance & Precision Installation VIBES-GUARD PdM PROGRAMTM Dynamic Balancing Agricultural Machinery ON-SITE

Learn more You can download all catalogues and educational articles from our home page at www.vibescorp.ca. Here are four recent articles:

Learn About Vibration, Volume 1 & 2: Basics & Advanced Vibration Analysis Electrically Induced Bearing Damage, aka Electrical Discharge Machining (EDM), Shaft Currents Failure Prevention of Variable Pitch in Motion Axial Fans

The photos below show typical projects that we have resolved. Fig 1. The failure was due to moisture contamination. Fig 2 The stainless steel guard solved the original problem with no issues for the last 13 years. Fig 3 A new fan was installed due to a complete failure of the original. Fig. 4 Shows a 200HP motor and fan repair/replacement.

____________________________________________________________________________________

STD-3300 2-CHANNEL ANALYZER

The choice of professionals:

Ultimate functionality and reliability

STD-3300 is a powerful vibration analyzer that collects and analyzes data through two channels simultaneously. Impressive diagnostics features and 2-plane balancing function make this analyzer a great tool for detecting various machinery faults.

Auto detection of sensor’s type and parameters. Work with any ICP sensors, proximitors, etc. Alert and alarm setups Complete data analysis on site (waveforms, spectrum, filtration, orbits, etc.) Long signals collection and further analysis Run Up/Coast Down Real-time analysis One- and two- plane balancing Free firmware and software updates VibroDesigner analysis software included It is possible to connect STD-3300 to on-line condition monitoring systems

Compact and light-weighted. Easy and intuitive one-hand operation, lightweight design – STD-

3300 is an ideal instrument for machinery inspection.

Clear display. High-contrast backlighting display enables working at any lighting conditions: from the shining sun to darkness.

Automatic sensor type identification. When a sensor is connected, STD-3300 automatically

detects sensor type and reads sensitivity, phase characteristic and gain factor. STD-3300 automatically detects which sensor type has been connected to each input, so you never mix up sensors.

Routes. Route and off-route data acquisition. VibroDesigner analysis software allows uploading

comprehensive data into the PC for further in-depth analysis.

Thresholds. You can set alerts/alarms thresholds right in the unit.

Long-lived operation. Due to adjustable auto shutdown feature, STD-3300 may work for a long time without recharge. The battery indication is always on the screen.

Large memory. The STD-3300 can store a large bulk of data in 2G permanent memory. Available

memory is displayed on the screen during operation.

Various operational approaches. Possible to equip STD-3300 with additional measurement functions by entering a license key (no firmware updates are required).

_______________________________________________________________________________________

____________________________________________________________________________________

ROUTES MODE STD-3300 allows easy data collection, as well as storage, classification and in-depth analysis of

route and off-route data. Time waveforms, spectrum, integration and differentiation, zooming and filtering, orbits and many

other features are available in order to exactly estimate machinery condition and its trends.

RMS spectrum (25600 lines resolution) (Visible region RMS, in-band value, etc.

Waveform collecting with filtering

1/3 or 1 octave spectrum – display in-band RMS and so on

BALANCING MODE

An intuitive menu provides you with quick and high-quality one- or two-plane balancing in on-site bearings. The analyzer demonstrates an imbalance degree and balancing results.

Balancing: Initial rotor vibration

Balancing: Report_______________________________________________________________________________________

____________________________________________________________________________________

MEASURING MODE A set of measurement and analysis options enable you to use the STD-3300 for machinery

conditions monitoring in various modes, to estimate speed characteristics, and locate defects and faults. In this mode, you can use the STD-3300 as a laboratory tool. STD-3300 has the following measuring modes:

1. Tachometer – measure rotor speed 2. Tacho+vibro – displaying fundamental frequencies vector with vibration value and phase in real

time 3. Long waveform – acquisition and further in-depth analysis of long time waveforms (up to 6M

sampling) 4. Run-up/Coast-down – high-resolution acquisition and analysis Run-up/Coast-down data to

estimate resonances in a machine.

Tacho+vibro mode

Long waveform mode

ANALYSIS SOFTWARE VibroDesigner Analysis Software allows machinery condition monitoring, creating of machine list

and route, archiving data, creating reports, etc. The collected data can be then analyzed to prevent catastrophic machine failure, unplanned production downtime and optimization of shop maintenance.

ACCESSORIES Various accessories allow you to expand STD-3300 functionality: CH-BNC-24 - adaptor to connect STD-3300 to BNC output of on-line monitoring systems,

transmitters, drivers, etc. AUX-BNC - adaptor to connect STD-3300 to BNC output of stationary key phasor Portable Stroboscope Impact hummer Current Clamp

_______________________________________________________________________________________

____________________________________________________________________________________

SPECIFICATION

Measurement channels: 2 analog inputs, 1 tacho input

Sensor type: VP-9, VP-11, ICP sensors, tacho-optical sensors, lasers, proximity switches, stationary key phasors, connection to on-line condition monitoring systems

Measurement parameters: RMS, Peak, Peak-to-Peak, time waveform, spectrum of

acceleration, velocity, displacement, envelope waveform, envelope spectrum, orbits, Run-up/Coast-down, real time measurement; route and off-route data acquisition

Frequency range: Fmin: 0 … Fmax Hz Fmax: 500 Hz … 32 kHz

Measurement range (VP-9, RMS): Displacement: 0 … 10 mm Velocity: 0 … 100 mm/s Acceleration: 0 … 500 m/s²

Spectrum resolution: 3200, 6400, 12800, 25600 lines

Sampling: 8192, 16384, 32768, 65536 points Averaging: 0 … 256 Averaging type: linear

Threshold (per each channel): 2

Memory Flash: 256 MB (option 2 GB); RAM: 32 MB

ADC: 2х24 bits Dynamic range: up to 109 dB Sample rate: up to 82 kHz

Accuracy: ±1%

Balancing: Shaft speed: 10 … 60 000 RPM Measurement types: acceleration, velocity, displacement Number of balancing planes: 1 or 2

Display: graphic LCD, monochrome, with backlight, 320x240, 3.8”

Temperature: -20 … +50°C

Size: 6.7” x 4.3” x 1.4” (170 x 110 x 35 mm)

Weight: 0,700 kg

Protection class: IP54

Power supply: Ni-MH, rechargeable

Operating time: 18 hours

_______________________________________________________________________________________