vib 10

1
VIC-13 TRX-17 VIB-10B VIB-11B VIC-11 / 12 TRV-22 TRV-23 TRX-16 46044 46045 Vibrameter VIB-10 / VIB-11 The evaluation of machine condition is based on a single parameter, vibration severity. This means that the instru- ment needs to display only one measured value, which reduces its cost and makes it easy to handle. The standards also provide a set of norm values for the common types of industrial plant. The readings obtained on a particular machine are interpreted by comparing them with the norm values for similar machines. Vibrameter VIB-10 (VIB-11) has been designed as a simple diagnostic tool for preventive maintenance. The instrument and the monitoring technique are based on the recommen- dations of ISO and the equivalent national standard organi- zations BS, VDI, etc. These standards make the assumption that limited informa- tion, obtained easily and at a low cost, is often as useful as a detailed analysis at the price of expensive equipment and elaborate techniques. They state that it is possible to de- tect even minor changes in the operating condition of a machine by measuring its general vibration level. It is as- sumed that, once the change has been noted, a competent inspector or repair crew will be able to find the actual defects which caused it. Part Numbers VIB-10B Vibrameter, mm/s VIB-11B Vibrameter, inch/s TRV-22 Vibration transducer, M8 TRV-23 Vibration transducer, UNF 1/4"-28 TRX-16 Magnetic base for transducer TRV-22 TRX-17 Probe for transducer TRV-22 46044 Measuring cable with connectors, 1.5 m 46045 Measuring cable with sealing TNC plug, 1.5 m VIC-11 Follow-up forms mm/s (VIB-10), pad of 25 VIC-12 Follow-up forms in/s (VIB-11), pad of 25 VIC-13 Follow-up forms, balancing, pad of 25 90022 Battery Technical data Measuring range VIB-10B: 0.5 to 99.9 mm/s RMS, VIB-11B: 0.01 to 3.93 in/s RMS, 10 to 1000 Hz Resolution: 0.1 mm/s (0.01 in/s) Accuracy 2% ± 0.2 mm/s (2% ± 0.02 in/s) Power supply Four 1.5 V alkaline cells (e.g. MN 1500 or UCAR E91) Temp. range 0 to +55 °C (32 to 131 °F) Display 3 digits, red LED Switch-off Automatic Protective cover Polyurethane Dimensions 210 x 75 x 30 mm (8.3" x 2.9" x 1.2") Weight 410 grams (14 oz) incl. batteries Connector type TNC SPM Instrument AB • Box 4 • SE-645 21 Strängnäs • Sweden Technical data are subject to change without notice. Tel +46 152 22500 • Fax +46 152 15075 • [email protected] • www.spminstrument.se ISO 9001 certified. © Copyright SPM 2001-05. TD-30.B

Upload: bahtiar-yudhistira

Post on 22-Oct-2015

46 views

Category:

Documents


0 download

DESCRIPTION

SD

TRANSCRIPT

Page 1: vib 10

VIC-13TRX-17

VIB-10BVIB-11B

VIC-11 / 12

TRV-22TRV-23

TRX-16

4604446045

Vibrameter VIB-10 / VIB-11

The evaluation of machine condition is based on a singleparameter, vibration severity. This means that the instru-ment needs to display only one measured value, whichreduces its cost and makes it easy to handle.

The standards also provide a set of norm values for thecommon types of industrial plant. The readings obtained ona particular machine are interpreted by comparing themwith the norm values for similar machines.

Vibrameter VIB-10 (VIB-11) has been designed as a simplediagnostic tool for preventive maintenance. The instrumentand the monitoring technique are based on the recommen-dations of ISO and the equivalent national standard organi-zations BS, VDI, etc.

These standards make the assumption that limited informa-tion, obtained easily and at a low cost, is often as useful as adetailed analysis at the price of expensive equipment andelaborate techniques. They state that it is possible to de-tect even minor changes in the operating condition of amachine by measuring its general vibration level. It is as-sumed that, once the change has been noted, a competentinspector or repair crew will be able to find the actualdefects which caused it.

Part NumbersVIB-10B Vibrameter, mm/s

VIB-11B Vibrameter, inch/s

TRV-22 Vibration transducer, M8

TRV-23 Vibration transducer, UNF 1/4"-28

TRX-16 Magnetic base for transducer TRV-22

TRX-17 Probe for transducer TRV-22

46044 Measuring cable with connectors, 1.5 m

46045 Measuring cable with sealing TNC plug, 1.5 m

VIC-11 Follow-up forms mm/s (VIB-10), pad of 25

VIC-12 Follow-up forms in/s (VIB-11), pad of 25

VIC-13 Follow-up forms, balancing, pad of 25

90022 Battery

Technical dataMeasuring range VIB-10B: 0.5 to 99.9 mm/s RMS,

VIB-11B: 0.01 to 3.93 in/s RMS,

10 to 1000 Hz

Resolution: 0.1 mm/s (0.01 in/s)

Accuracy 2% ± 0.2 mm/s (2% ± 0.02 in/s)

Power supply Four 1.5 V alkaline cells

(e.g. MN 1500 or UCAR E91)

Temp. range 0 to +55 °C (32 to 131 °F)

Display 3 digits, red LED

Switch-off Automatic

Protective cover Polyurethane

Dimensions 210 x 75 x 30 mm

(8.3" x 2.9" x 1.2")

Weight 410 grams (14 oz) incl. batteries

Connector type TNC

SPM Instrument AB • Box 4 • SE-645 21 Strängnäs • Sweden Technical data are subject to change without notice.Tel +46 152 22500 • Fax +46 152 15075 • [email protected] • www.spminstrument.se ISO 9001 certified. © Copyright SPM 2001-05. TD-30.B