2600 N.E. Andresen Road, Building A • Vancouver, Washington, USA 98661 1-888-571-8352 • 360/993-0515 • FAX 360/993-1726 • www.Canica-Jaques.com

Since 1974 Innovators, Not Imitators™

Vertical Shaft Impact Crushers

“The LogicalSuperpaveSolution”

“The LogicalSuperpaveSolution”

√ Canica-Jaques Patented Hydraulic Lid Lifter√ Modular Oil Lube System√ Externally Adjustable Feed Tube System√ Bang Boards√ Unitized Construction√ Cast Tub and Lid Liners√ Motor Mount and Adjustable Take-ups√ Motor Mount Covers √ V-Belt Drive√ Heavy Duty Pedestal Drive

with Double Self-Aligning Spherical Roller Bearings

√ RPM Gauge√ Vibration Detector√ Hour Meter √ Open-Lid Crusher Safety Cut-Off√ Canica-Jaques Three (3) Year Factory Warranty

CANICA-JAQUESPATENTED ANVILSVaulted, reversible stobanvils, single use anvils, androck box available for allmodels.

ADJUSTABLE MOTOR MOUNTSSingle, or twin. Diesel drive available.

MODULAR OIL LUBE SYSTEMThirty-five gallon system withlow pressure safety shut downs;temperature, oil flow, and oilpressure gauges. Oil heater system, all models.

THREE OPEN TABLE SYSTEMSAND AUTOGENOUS ROTOR SYSTEMSStandard, heavy duty, and covered tables, and autogenous rotor systems up to 44” to meet your needs.

DOUBLE SPHERICALROLLER BEARINGSSelf aligning, largest inthe industry .

C-J STANDARD FEATURES

2

FEED TUBEExternally adjustablefeed system can beadjusted while machineis in operation toincrease, or decrease,fracture content.

HYDRAULIC LID LIFTERA hydraulic lid lifter, with a maximum3600 rotation, is standard on all models.

VIBRATION DETECTIONSafety warning or shut-off if vibration isdetected beyond programmable limits.

YOUR SUPERPAVE SOLUTIONThe secret to producing superpave spec material is a properly configured Vertical Shaft

Impact crusher. Maximum efficiency with a VSI machine comes from the ability to set up andfine-tune the right combination of components within the system.

Canica-Jaques has always led the way in the development of VSI crushing —acquiring a rep-utation for being “Innovators, not Imitators ™” — by having an outstanding research anddevelopment program, and working closely with their “production partners” in the field tomake sure operators are maximizing production with their VSI crushers.

MADE IN USA

3

INNOVATORS, NOT IMITATORSTM

CANICA-JAQUES sets the standard for fine-tuning your system by offering:

√ Nine Crusher Models50-1,000 TPHup to 12” maximum feed size

√ Multiple Impeller Typescoarse, fine, pocket, etc.

√ Three Open Table Configurationsstandard, heavy duty, covered

√ Autogenous Rotor Options4 port, large, and small6” maximum feed size

√ Rock Boxsized to fit all models

√ Two power drive options,electric or diesel

√ Three Installation Optionsskid, stand, and portable

STANDARD DUTY TABLEmodels 45 to 1053-4-5-6 impellers

VAULTED ANVILRING ASSEMBLY

ROCK BOX

COVERED TABLEAvailable standard & heavy duty3-4-5-6 impellerslight feed or tight gradation

TYPICALIMPELLER

TYPESIn chrome

and ceramic

C-J OPTIONS

4

STOB ANVILRING ASSEMBLY

ROTORAvailable as 34”, 4 port, 3” minus44”, 3-4-5 port, 6” minus

HEAVY DUTY TABLEmodels 105-125-1553-4-5-6 impellers, 6” plus feed size

CANICA-JAQUES patentedVaulted Anvil System offers

largest impact surface, accurate impact angles, and

longest wear life in theindustry.

5

e c

100S 105 125 155

Maximum Feed SizeLongest Dimension

Maximum Through-putCapacity (TPH)

Feed size and tons per hour dependent on type of feed and HP available

Maximum Impeller RPMdepending on feed size

Recommended Electric HP for maximum through-put

Table AssemblyDiameter (in/mm)

Feed TubeDiameter (id)

Vaulted Anvil RingAssembly Diameter (id)

Impellers per TableRotor size

Number of Ports

2”51 mm

300 TPH

1400 RPM

600 HP

38” 965 mm

141/4”362 mm

48 1/8” 1222 mm

5-638” / 965 mm

4

6”152 mm

500 TPH

1200 RPM

600 HP

42” 1067 mm

17”432 mm

65” 1651 mm

3-4-5-644” / 1118 mm

4

8”203 mm

750 TPH

1050 RPM

700 HP

46” 1168 mm

18”457 mm

66 5/16” 1684 mm

3-4-5-644” / 1118 mm

4

12”305 mm

1000 TPH

850 RPM

800 HP

54” 1372 mm

22”559 mm

85” 2159 mm

3-4-5

45 1009065 80Maximum Feed SizeLongest Dimension

Maximum Through-putCapacity (TPH)

Feed size and tons per hour dependent on type of feed and HP available

Maximum Impeller RPMdepending on feed size

Recommended Electric HP for maximum through-put

Table AssemblyDiameter (in/mm)

Feed TubeDiameter (id)

Vaulted Anvil RingAssembly Diameter (id)

Impellers per TableRotor size

Number of Ports

1 1/2”38 mm

50 TPH

2750 RPM

100 HP

18” 457 mm

7”178 mm

23 5/16” 592 mm

3-4-5

2”51mm

125 TPH

1800 RPM

200 HP

26” 660 mm

9”229 mm

36” 914 mm

3-4-5-6

3 1/2”89 mm

250 TPH

1600 RPM

300 HP

34” 864 mm

12 1/2”318 mm

46 1/2” 1181 mm

3-4-5-634” / 864 mm

4

4”102 mm

350 TPH

1400 RPM

400 HP

38” 965 mm

141/4”362 mm

48 1/8” 1222 mm

3-4-5-638” / 965 mm

4

5”127 mm

400 TPH

1400 RPM

600 HP

38” 965 mm

141/4”362 mm

57 9/16” 1462 mm

3-4-5-638” / 965 mm

4

C-J TECH SPECS

6

A

H

K

C

7

L

E

J

B

F

G

Measurements Model 45 Model 65 Model 80 Model 90 Model 100 Model 100S Model 105 Model 125 Model 155

Note:* Weights are without motors.

*Standard on Models 125 and 155

A/ Feed Hopper 18" Sq/457mm 26" Sq/660mm 29 1/2" Sq/749mm37 1/2" Sq/953mm37 1/2" Sq/953mm37 1/2" Sq/953mm37 1/2" Sq/953mm 48" Sq/1219mm 48" Sq/1219mm

B/Crusher Height 53 3/8" / 1 3 5 6 m m 54 3/4" / 1 3 9 1 m m 69 3/4" / 1 7 7 2 m m 69 3/4" / 1 7 7 2 m m 69 3/4" / 1 7 7 2 m m 69 3/4" / 1 7 7 2 m m 75 "/1905mm 77 1/2" / 1 9 6 9 m m 85 "/ 2159mm

C/Crusher Width 50"/1356mm 65"/1651mm 85"/2159mm 85"/2159mm 97"/2464mm 112 1/8"/2849mm 97" / 2464mm 106 3/4" / 2 7 1 1 m m 125 1/2" / 3 1 8 8 m m

D/ Crusher Weight * 8,000 lbs 12,000 lbs 24, 220 lbs 27,500 lbs 31,200 lbs 37,000 lbs 40,000 lbs 51,000 lbs 58,000 lbsE/ Height, Open 87 3/16" / 2 2 1 5 m m 93 7/16" / 2 3 7 3 m m 109 3/4" / 2 7 8 8 m m 115 5/8" / 2 9 3 7 m m 115 5/8" / 2 9 3 7 m m 139 5/8" / 3 5 4 6 m m 119"/ 3023mm 119"/ 3023mm 126 5/16" / 3 2 0 8 m m

F/ Height, Operating 6 5 " / 1 6 5 1 m m 7 2 " / 1 8 2 9 m m 8 7 " / 2 2 0 9 m m 9 3 " / 2 3 6 2 m m 9 3 " / 2 3 6 2 m m 1 1 7 " / 2 9 7 2 m m 9 6 " / 2 4 3 8 m m 9 8 " / 2 4 8 9 m m 1 0 2 " / 2 5 9 1 m mG/ Single Electric Base 90"/2286mm 118"/2997mm 151 1/2" / 3 8 3 5 m m 140 "/3556 mm 152 "/3861mm 152 "/3861mm 152 "/3861mm 162"/4115mm 180 1/2" / 4 5 7 2 m m

H/ Dual Electric Base na na na 196"/ 4978mm 2 0 8 " / 5 2 8 3 m m 2 0 8 " / 5 2 8 3 m m 2 0 8 " / 5 2 8 3 m m 2 1 6 " / 5 4 8 6 m m 2 3 6 " / 5 9 9 4 m mJ/ Motor Mount Height 38" / 965mm 55" / 1397mm 69 1/4" / 1759mm 69 1/4" / 1759mm 69 1/4" / 1759mm 69 1/4" / 1759mm 69 1/4" / 1759mm 69 1/4" / 1759mm 72 3/8" /1838mm

K/ Lid Swing Radius 53 1/2" / 1 3 5 9 m m 66 1/2" / 1 6 8 9 m m 84 1/2" / 2 1 4 6 m m 84 1/2" / 2 1 4 6 m m 96 1/2" / 2 4 5 1 m m 96 1/2" / 2 4 5 1 m m 96 1/2" / 2 4 5 1 m m 106 1/2" / 2 7 0 5 m m 127"/3226mm

L/ Motor Mount Width 26" / 660mm 34" / 864mm 42" / 1067mm 42" / 1067mm 42" / 1067mm 42" / 1067mm 42" / 1067mm 42" / 1067mm 49" / 1245mm

CANICA-JAQUESVERTICAL SHAFT IMPACT CRUSHERSARE ENVIRONMENTALLY FRIENDLY OPTI

ONAL AIRRECIRCULATION SYSTEM

MIST SYSTEM

The Canica-Jaques VSIcrusher uses natural airflow generated by therotation of the impellertable to direct and positionfine dust particulate. Thismaterial falls to the dischargeconveyor where it is processed along withthe normal crusher output.

The Canica-Jaques system can be usedin conjunction with a bag house or classifi-er system for finite dust control.

Some of our customers utilize a mist orspray system at the conveyor discharge tofurther reduce airborne particulate.

ENVIRONMENTAL

8

CANICA-JAQUESRESEARCH & DEVELOPMENT

To meet the demands of super-pave, and increasing productionrequirements of the 21st Century,Canica-Jaques has a full time ongoing R&D program.

TEST CRUSHERCanica-Jaques utilizes a full size

vertical shaft impact crusherdesigned to duplicate each of thenine models currently in theCanica-Jaques family of crushers.Our test program is run by a certi-fied technician who supervises allphases of the test crush program.Within this program we crush hardand soft rock, from 12” minus*, toassure the plant shipped meetsyour needs. * Feed size and tons per hour dependent on type of feed and HP available

RECENT R&D PROJECTS

— AUTOGENOUSROTORDeveloped small and large

autogenous rotors for high abra-sion applications. — CERAMIC WEAR PARTS

One negative often stated byvery expensive cone crusher man-ufacturers about VSI configurationsis the cost of wear parts (thoughthe total cost per VSI produced tonis less). Now Canica-Jaques hasmade a breakthrough in space-ageceramics that has increased wearlife two to three times.

C-J WWW INFORMATION

— WWW.CANICAJAQUES.COM

— WWW.VSIINFO.COM

— WWW.VSIWEARPARTS.COM

— WWW.ROCKCRUSHERRENTAL.COM

C-J R&D

9

CANICA-JAQUES offers manyconfigurations to meetour “ProductionPartners” needs.

STATIONARYPLANTS

Electric or dieselpowered crushers

on stands or skids.

MOBILE PLANTSCustom electric

or diesel configu-rations, dust recirculation

option on roadlegal or pit

portable.

COMBINATION PLANTSCustom electric or

diesel configurations,up to 8x20 tripledeck screen, reversingconveyors, and/orhydraulic lifting legs.

CONFIGURATIONS

10

CONVERSIONSREASONS FOR CONVERTING

The Canica-Jaques Vertical Shaft Impact crushing systemmay be retro fitted to the customers existing VSI plant. TheCanica-Jaques system, consisting of our table, patentedvaulted anvils and ring, and other components, will increaseyour production and profitability.

By utilizing the patented vaulted anvil system, wear lifeexpectancy will increase by two to three times over yourexisting system.

Canica-Jaques offers a variety of anvil ring and rock boxcombinations. By utilizing one of our open or closed tableconfigurations, you will have the capability to fine tune yourexisting system.

Combine the above with our unmatched customer support to create a winning combination.

For a list of successful VSI conversions, pleasecontact Canica-Jaques at 1-888-571-8352, or atwww.Canica-Jaques.com.

Our plant and offices are located at:2600 N.E. Andresen Road, Building A,

Vancouver, Washington, 98661USA

© COPYRIGHT 1999 by Canica-Jaques11

Our Mission StatementOur Mission Statement

Our Vision

The people of Canica-Jaques are committed to providing the highest quality product and services in the marketplace — on time,efficiently, and in a safe work environment. This will result in totalcustomer satisfaction, thereby creating opportunities for greater

We strive to deliver absolute customer satisfaction as a worldleader in providing Vertical Shaft Impact crushing solutions.

YOUR CANICA-JAQUES DEALER:

Our Vision