veritasâ„¢ cluster server management pack guide for microsoft

Veritas™ Cluster ServerManagement Pack Guide forMicrosoft System CenterOperations Manager 2007

Windows

VCS Management Pack

Veritas™ Cluster Server Application Management PackGuide for Microsoft System Center Operations Manager2007

The software described in this book is furnished under a license agreement andmay be usedonly in accordance with the terms of the agreement.

Product version:

Document version:

Legal NoticeCopyright © 2012 Symantec Corporation. All rights reserved.

Symantec, the Symantec logo, Veritas, Veritas Storage Foundation, CommandCentral,NetBackup, Enterprise Vault, and LiveUpdate are trademarks or registered trademarks ofSymantec corporation or its affiliates in the U.S. and other countries. Other names may betrademarks of their respective owners.

This Symantec product may contain third party software for which Symantec is requiredto provide attribution to the third party (“Third Party Programs”). Some of the Third PartyPrograms are available under open source or free software licenses. The LicenseAgreementaccompanying the Software does not alter any rights or obligations you may have underthose open source or free software licenses. See the Third-party Legal Notices documentfor this product, which is available online or included in the base release media.

The product described in this document is distributed under licenses restricting its use,copying, distribution, and decompilation/reverse engineering. No part of this documentmay be reproduced in any form by any means without prior written authorization ofSymantec Corporation and its licensors, if any.

THEDOCUMENTATIONISPROVIDED"ASIS"ANDALLEXPRESSORIMPLIEDCONDITIONS,REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OFMERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT,ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TOBELEGALLYINVALID.SYMANTECCORPORATIONSHALLNOTBELIABLEFORINCIDENTALOR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE FURNISHING,PERFORMANCE, OR USE OF THIS DOCUMENTATION. THE INFORMATION CONTAINEDIN THIS DOCUMENTATION IS SUBJECT TO CHANGE WITHOUT NOTICE.

The Licensed Software andDocumentation are deemed to be commercial computer softwareas defined in FAR12.212 and subject to restricted rights as defined in FARSection 52.227-19"Commercial Computer Software - Restricted Rights" and DFARS 227.7202, "Rights inCommercial Computer Software or Commercial Computer Software Documentation", asapplicable, and any successor regulations. Any use, modification, reproduction release,performance, display or disclosure of the Licensed Software andDocumentation by theU.S.Government shall be solely in accordance with the terms of this Agreement.

Symantec Corporation350 Ellis StreetMountain View, CA 94043

http://www.symantec.com

http://www.symantec.com

Technical SupportSymantec Technical Support maintains support centers globally. TechnicalSupport’s primary role is to respond to specific queries about product featuresand functionality. TheTechnical Support group also creates content for our onlineKnowledge Base. The Technical Support group works collaboratively with theother functional areas within Symantec to answer your questions in a timelyfashion. For example, theTechnical Support groupworkswithProductEngineeringand Symantec Security Response to provide alerting services and virus definitionupdates.

Symantec’s support offerings include the following:

■ A range of support options that give you the flexibility to select the rightamount of service for any size organization

■ Telephone and/or Web-based support that provides rapid response andup-to-the-minute information

■ Upgrade assurance that delivers software upgrades

■ Global support purchased on a regional business hours or 24 hours a day, 7days a week basis

■ Premium service offerings that include Account Management Services

For information about Symantec’s support offerings, you can visit our Web siteat the following URL:

www.symantec.com/business/support/index.jsp

All support services will be delivered in accordance with your support agreementand the then-current enterprise technical support policy.

Contacting Technical SupportCustomers with a current support agreement may access Technical Supportinformation at the following URL:

www.symantec.com/business/support/contact_techsupp_static.jsp

Before contacting Technical Support, make sure you have satisfied the systemrequirements that are listed in your product documentation. Also, you should beat the computer onwhich the problemoccurred, in case it is necessary to replicatethe problem.

When you contact Technical Support, please have the following informationavailable:

■ Product release level

http://www.symantec.com/business/support/index.jsp

http://www.symantec.com/business/support/contact_techsupp_static.jsp

■ Hardware information

■ Available memory, disk space, and NIC information

■ Operating system

■ Version and patch level

■ Network topology

■ Router, gateway, and IP address information

■ Problem description:

■ Error messages and log files

■ Troubleshooting that was performed before contacting Symantec

■ Recent software configuration changes and network changes

Licensing and registrationIf yourSymantecproduct requires registrationor a licensekey, access our technicalsupport Web page at the following URL:

www.symantec.com/business/support/

Customer serviceCustomer service information is available at the following URL:

www.symantec.com/business/support/

Customer Service is available to assist with non-technical questions, such as thefollowing types of issues:

■ Questions regarding product licensing or serialization

■ Product registration updates, such as address or name changes

■ General product information (features, language availability, local dealers)

■ Latest information about product updates and upgrades

■ Information about upgrade assurance and support contracts

■ Information about the Symantec Buying Programs

■ Advice about Symantec's technical support options

■ Nontechnical presales questions

■ Issues that are related to CD-ROMs or manuals

http://www.symantec.com/business/support/

http://www.symantec.com/business/support/

Support agreement resourcesIf youwant to contact Symantec regarding an existing support agreement, pleasecontact the support agreement administration team for your region as follows:

[email protected] and Japan

[email protected], Middle-East, and Africa

[email protected] America and Latin America

DocumentationYour feedback on product documentation is important to us. Send suggestionsfor improvements and reports on errors or omissions. Include the title anddocument version (located on the second page), and chapter and section titles ofthe text on which you are reporting. Send feedback to:

[email protected]

For information regarding the latest HOWTO articles, documentation updates,or to ask a question regarding product documentation, visit the Storage andClustering Documentation forum on Symantec Connect.

https://www-secure.symantec.com/connect/storage-management/forums/storage-and-clustering-documentation

About Symantec ConnectSymantec Connect is the peer-to-peer technical community site for Symantec’senterprise customers. Participants can connect and share informationwith otherproduct users, including creating forum posts, articles, videos, downloads, blogsand suggesting ideas, as well as interact with Symantec product teams andTechnical Support. Content is rated by the community, and members receivereward points for their contributions.

http://www.symantec.com/connect/storage-management

mailto:[email protected]






http://www.symantec.com/connect/storage-management

Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Chapter 1 VCS Mangement Pack monitoring rules . . . . . . . . . . . . . . . . . . . . . . . . . . 9

About the VCS Mangement Pack .... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Alerts and Events ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Views .... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Groups .... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Chapter 2 Deploying the VCS Management Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Supported Software .... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Before you import the VCS Management Pack .... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Importing the VCS Management Pack .... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Chapter 3 VCS Management Pack monitoring rules . . . . . . . . . . . . . . . . . . . . . . . 17

About monitoring rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17HAD monitoring rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17GAB monitoring rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56LLT monitoring rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58Agents monitoring rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

VMDg event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59MountV agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61ElifNone agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63FileNone agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63FileOnOff agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63FileOnOnly agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64FileShare agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64Internet Information Services (IIS) agent event processing

rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66GenericService event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71Microsoft Virtual Machine (MSVirtualMachine) agent event

processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73PrintShare agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74PrintSpool agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Contents

Proxy agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78IP agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79IPMultiNicPlus agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80NetLsnr agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83NIC agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83NotifierMngr agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84Registry Replication (RegRep) agent event processing rules ... . . . . . . . . 85Lanman agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87VvrRvg agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90RVGPrimary agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Enterprise application agents ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95MSDTC event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95MSSearch event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97SQL Server 2012 Agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . 99SQL Server 2008 Agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . 100SQL Server 2005 Agent Service event processing rules ... . . . . . . . . . . . . . 100SQL Server 2005 OLAP Service event processing rules ... . . . . . . . . . . . . . . 102SQL Server 2005 event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104Service Monitor event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106Oracle Agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107NetAppFiler agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108NetAppSnapDrive agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . . 109NetAppSnapMirror agent event processing rules ... . . . . . . . . . . . . . . . . . . . . . 110

Agent Framework monitoring rules ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

Contents8

VCS Mangement Packmonitoring rules

This chapter includes the following topics:

■ About the VCS Mangement Pack

■ Rules

■ Alerts and Events

■ Views

■ Groups

About the VCS Mangement PackThe Veritas Cluster Server (VCS) Management Pack for Microsoft System CenterOperationsManager 2007 (SCOM) helps youmonitor VCS components in a SCOMmonitoring environment.

Table 1-1 lists the details of the VCS Management Pack for SCOM 2007.

Table 1-1 VCS Management Pack

DescriptionFile Name

The management pack that contains rules formonitoring VCS components.

Symantec.SFW.HA.mp

TheVCSManagement Pack, Symantec.SFW.HA.mp, is a sealedmanagement packthat contains rules to monitor the following VCS components:

1Chapter

Table 1-2 VCS Management Pack: VCS components monitored

DescriptionComponent name

Thehigh availability engine, orHAD, is themainVCSdaemonrunning on each system. It is responsible for building therunning cluster configuration from the configuration files,distributing the informationwhennewnodes join the cluster,responding to operator input, and taking corrective actionwhen something fails. The VCS Management Pack monitorsthe status of the HAD and notifies the user in case of errors.

Engine (HAD)

Group Membership Services/Atomic Broadcast (GAB) isresponsible for cluster membership and clustercommunications. The VCS Management Pack monitors thestatus of the cluster memberships and communications.

GAB

VCS uses private network communications between clusternodes for cluster maintenance. The Low Latency Transport(LLT) functions as a high-performance, low-latencyreplacement for the IP stack, and is used for all clustercommunications. The VCS Management Pack monitors theLLT status.

LLT

The VCS Management Pack monitors the status of the VCSBundled agents and Enterprise agents. The VCS agentframework is a set of common, predefined functions compiledinto each agent. These functions include the ability to connectto the VCS engine (HAD) and to understand commonconfiguration attributes. The agent framework frees thedeveloper fromdeveloping support functions required by thecluster, and instead focus on controlling a specific resourcetype. The VCS management pack monitors the status of thecommon agent framework.

Agents (Agent Framework)

The VCS Management Pack contains the following monitors:

■ VCS for Windows Installation by Symantec

■ VeritasClusterThese monitors are the targets for the rules defined in the VCS ManagementPack.

RulesThe VCS Management Pack rules collect data, such as events, from the logsgenerated by theVCS components. Someof the rules have an associated alert that

VCS Mangement Pack monitoring rulesRules

10

notifies the administrator about the event that triggered the alert. You can viewtheVCS rules after you import theVCSManagement Pack inOperationsManager2007.

See “About monitoring rules” on page 17. for a detailed list of VCS rules.

Alerts and EventsDepending on the rule and the alert that has been set for an event, an appropriatealert is generated when the event is received on the Operations Manager 2007server. An alert notifies the administrator about the event that triggered the alert.

Each rule that generates the alert assigns an alert level that indicates the severityof that event. You can use the severity level to determine the importance of thealert and the necessary steps required to address the alert.

Note: The VCS Management Pack does not include a notification group forautomatic alerts by e-mail. If e-mail alerts are required, you must add the alertprocessing rules manually.

ViewsViews are groups of managed objects that have a commonality, which is definedin the view properties. The views supported by the VCSManagement Pack enableyou to monitor the health of the VCS components within the managedenvironment. These views enable you to assess the state of the required clusternode within the managed environment.

When you import the VCS Management Pack, an item named Veritas ClusterServer by Symantec is created under theMonitoring node in theMonitoring paneof the Operations Manager 2007 console. Expand Veritas Cluster Server bySymantec to see the views supported by the VCS Management Pack.

The following views are supported:

■ Active AlertsThis viewprovides a list of alerts that are openand require action for computersin the All Computers in Management Pack - Symantec.SFW.HA group. Itindicates the current state and severity of those alerts.

■ State ViewThis view provides a real-time, consolidated look at the health of the clusterwithin the managed environment, highlighting the systems that require

11VCS Mangement Pack monitoring rulesAlerts and Events

attention. It displays the state of the service groups and the resourcesconfigured in the service group.In theMonitoring pane, expandVeritasClusterServerbySymantec and clickStateView. In the StateViewpane, click an item in theVeritasCluster column.The Detail View section displays the status of the service group and theresources. Depending on the state the status is displayed as follows:

■ Healthy:Indicates that the service group and its resources are online onthe node.

■ Warning: Indicates that the service group is partially online on the node.

■ Critical: Indicates that either the service group or the resources in theservice group have faulted on the node.Whenever a service group or a resource in a service group faults on a node,an appropriate alert is generated.VCS management pack has a separate monitor for monitoring the healthof the Veritas High Availability Daemon (HAD). If HAD is not running ona node, then an appropriate alert is generated. This alert stays active untilthe time HAD starts on that node. As soon as HAD starts on the node, thisalert gets resolved automatically. To enable the state view display for VCS,the following rules have been created in VCS for Windows Installation bySymantec:

■ VeritasCluster Service Discovery

■ VeritasCluster State MonitoringThe scripts that these rules invoke, internally use theMOMUtil.exe utility.The MOMUtil utility discovers all the service groups and resources in thecluster and then gathers the state related information for all the servicegroups and resources.

■ AlertsDisplays alerts for the VCS components: Agents, Engine, GAB, and LLT. Thisview provides a list of issues and the current state and severity of each alert.It indicateswhether the alerts have been acknowledged, escalated, or resolved,and also whether a Service Level Agreement has been breached.

■ EventsDisplays events for the VCS components: Agents, Engine, GAB, and LLT. TheEvent view provides a list of events that have occurred on managed servers,a description of each event, and the source of the problem.

VCS Mangement Pack monitoring rulesViews

12

GroupsGroups in Operations Manager 2007 are logical collections of objects such ascomputers, hard-disks, or instances of SQL or Exchange. Groups help define onwhich computers the rules are deployed. When you import the VCS ManagementPack, the following groups are created:

■ Veritas Cluster Server by Symantec Computer Group—Includes Windowsservers running Veritas Cluster Server 5.1 or later.

■ All Computers in ManagementPack: Symantec.SFW.HA—Contains all thecomputers that are discovered as a part of other computer groups defined inManagementPack Symantec.SFW.HA

These groups are located under the Groups node in the Authoring pane of theOperations Manager 2007 Console.

13VCS Mangement Pack monitoring rulesGroups

VCS Mangement Pack monitoring rulesGroups

14

Deploying the VCSManagement Pack


■ Supported Software

■ Before you import the VCS Management Pack

■ Importing the VCS Management Pack

Supported SoftwareThe VCS Management Pack is compatible with the following product versions:

■ Microsoft System Center Operations Manager 2007 SP1

■ Microsoft System Center Operations Manager 2007 R2

■ Storage Foundation and HA 5.1 for Windows or later

■ Veritas Cluster Server 5.1 for Windows or later

Before you import the VCS Management PackEnsure that the following prerequisites are complete before you proceed:

■ Verify that Operations Manager 2007 infrastructure is set up and configuredcorrectly.See the Microsoft System Center Operations Manager 2007 documentationfor more information.

■ Download and import the VCS LibraryManagement Pack on themanagementserver.

2Chapter

Refer to theVeritas Cluster Server LibraryManagement PackGuide for SystemCenter OperationsManager 2007 for instructions. This guide is available withtheVCSLibraryManagementpack. Ensure that you complete all theproceduresmentioned in the guide.

Importing the VCS Management PackImport the VCSManagement Pack file, Symantec.SFW.HA.mp, on the operationsmanagement server. Procedures for importingamanagementpackvarydependingon the version of System Center Operations Manager 2007.

Refer to the SystemCenter OperationsManager 2007 documentation and use theappropriate procedure.

Deploying the VCS Management PackImporting the VCS Management Pack

16

VCS Management Packmonitoring rules


■ About monitoring rules

■ HAD monitoring rules

■ GAB monitoring rules

■ LLT monitoring rules

■ Agents monitoring rules

■ Enterprise application agents

■ Agent Framework monitoring rules

About monitoring rulesThis chapter lists themonitoring rules forVCS components. Themonitoring rulesconsist of event processing rules and alert processing rules.

HAD monitoring rulesTable 3-1 lists the rules for the VCS High Availability Engine (HAD).

3Chapter

Table 3-1 HAD Monitoring Rules

AlertEnabled

EventEnabled

SeverityRule NameModuleName

EventID

NYWarningIncorrect snmp commandHAD10746

NYWarningUnexpected return valueHAD10755

NYWarningNode id expectedHAD10761

NYWarningToo many optionsHAD10772

NYWarningMust specify the type nameHAD10792

NYWarningToo few argumentsHAD10799

NYWarningConnection timed outHAD10805

NYWarningError while registering resourceHAD10806

NYWarningValue type not supportedHAD10809

NYWarningInvalid group dependency typespecified: %1

HAD10811

NYWarningUnable to open file ‘%1’. The filemay be corrupted or does notexist.

HAD10813

NYWarningIncorrect LDF path specifiedHAD10814

NYWarningIncorrect message severityspecified

HAD10815

NYWarningIncorrect object type specifiedHAD10816

NYWarningIncorrect object name specifiedHAD10817

NYWarningVCS object tag does not have anobject name

HAD10818

NYWarningIncorrect message ID specifiedHAD10819

NYWarningNo messages match your queryHAD10821

NYWarningNo log files availableHAD10822

NYWarningIncorrect language specifiedHAD10823

VCS Management Pack monitoring rulesHAD monitoring rules

18

Table 3-1 HAD Monitoring Rules (continued)

AlertEnabled

EventEnabled


EventID

NYWarningUnable to open file ‘%1’. This filewas generated by a newerversion of the VCS engine.

HAD10824

NYWarningTail value must be an integervalue greater than 0

HAD10825

NYWarningIncorrect system specified forcheckpartial option

HAD10826

NYErrorhacf -status died. Transitioningto STALE_DISCOVER_WAIT

HAD11005

NYErrorExiting:Cannot lock %1 error =%2

HAD11007

NYErrorExiting: Another copy of VCSmay be running

HAD11009

NYWarningCannot lock file: %1 error = %2HAD11012

NYWarningCannot write ‘%1’ to %2HAD11014

NYErrorEnvironment variable %1 is notdefined

HAD11015

NYErrorFailed to interpret line %1HAD11016

NYWarningFailed to notify service ctlmanager (SCM)

HAD11021

NYWarningSystem name retrieval failedHAD11024

NYErrorError querying Registry value%1

HAD11028

NYWarningHAD not ready to receive thiscommand. Message was: 0x%1

HAD11030

NYErrorGABTCP open failed. Exiting.HAD11031

NYErrorRegistration failed. Exiting.HAD11032

NYErrorGAB open failed. Exiting.HAD11033

NYErrorGAB recv failed. Exiting.HAD11036

19VCS Management Pack monitoring rulesHAD monitoring rules


AlertEnabled

EventEnabled


EventID

NYErrorFailed toStartServiceCtrlDispatcher %1

HAD11037

NYErrorFailed to open had serviceHAD11038

NYErrorFailed to makeMSG_CLUSTER_STOP_SYS.

HAD11039

NYWarningEngine Stopping Deleting vlistfor %1

HAD11041

NYWarningUnknownmajor/minormsg=%1HAD11043

NYWarningUnable to create temporary fileHAD1045

NYWarningLocal system not availableHAD1046

NYWarningUnable to execute the hastatusprint command

HAD1047

NYWarningUnknown process-registrationmsg: %1

HAD11055

NYWarningGroup ‘%1’ does not exist.Resources added laterwill not beregistered.

HAD11062

NYWarningType ‘%1’ does not exist.Resources added laterwill not beregistered

HAD11064

NYWarning%1 is an invalid TAGHAD11084

NYErrorExiting: Cannot make directory:%1

HAD11086

NYWarningAnotherhashadowrunning.VCSengine is exiting.

HAD11098

NYErrorVCS exited. It will restart .HAD11103

NYErrorVCS has faulted %1 times since%2 hashadow will not restartVCS. Correct the problem andrestart VCS.

HAD11104


20


AlertEnabled

EventEnabled


EventID

NYWarningCannot get lock on file: %1HAD11106

NYWarningCannot start had. Error=0x%1HAD11108

NYWarningCannot start had. Error=%1HAD11109

NYWarningMemory allocation failed.HAD11113

NYWarningNo username.HAD11130

NYWarningIncorrect username.HAD11131

NYWarningCannot get password -- error0x%1

HAD11135

NYWarningCannot encryptpassword -- error0x%1

HAD11137

NYWarningCannotioctl(IOCTL_LLT_GETPARAM/LP_MAXLINKS(Windows Error Code = %1)

HAD11148

NYWarningCannotioctl(IOCTL_LLT_GETLINKINFO(Windows Error Code = %1)

HAD11149

NYWarningCannotioctl(IOCTL_LLT_GETPARAM/LP_MAXNODE(Windows Error Code = %1)

HAD11150

NYWarningCannotioctl(IOCTL_LLT_GETNODEALL(Windows Error Code = %1)

HAD11151

NYWarningCannot malloc(%1 for msgbuf)HAD11152

NYWarningCannotioctl(IOCTL_LLT_GETPARAM/LP_MAXNODE)

HAD11154

NYWarningCannotioctl(IOCTL_LLT_GETNODEALL)

HAD11164

NYWarningError opening /dev/gab_0HAD11165



AlertEnabled

EventEnabled


EventID

NYWarningError opening /dev/lltHAD11166

NYWarningCannotioctl(IOCTL_LLT_GETLINKINFO)

HAD11168

NYErrorFailed to get Link heartbeatstatus.

HAD11169

NYErrorFailed to get Disk heartbeatstatus.

HAD11170

NYWarningCannotioctl(IOCTL_LLT_GETPARAM/LP_MAXLINKS)

HAD11171

NYErrorSystem shutting down on %1HAD11274

NYWarningRetry Interval is %1 at fault %2HAD11277

NYWarningError on executing gab_getdisk.HAD11278

NYWarningFailed to read file ‘%1’HAD11279

NYWarninghadiscover could not findfunction (%1) in library

HAD11280

NYWarningDiscovery of %1 attribute failedHAD11281

NYWarningFailed to list discoverableattributes

HAD11282

NYWarningDiscovery not supported forType %1

HAD11283

NYWarningYour evaluation period hasexpired. VCS will not start thenext time you invoke hastart

HAD11284

NYError[Licensing] You have %1 day(s)left in your VCS evaluationperiod

HAD11285

NYWarningUpdating license key on %1HAD11286


22


AlertEnabled

EventEnabled


EventID

NYErrorFailed to update engine’s copy oflicense key

HAD11287

NYWarningLicense keyupdated successfullyon the local node. The halicutility needs to be run on allnodes in the cluster in order forthe VCS license to be updatedproperly

HAD11288

YYErrorLicense key is not unique withincluster. Failed to update licensekey.

HAD11289

NYWarningWARNING:Oneormore systemsare not online.

HAD11290

NYWarningCanceling license key updateHAD11291

NYWarningWARNING:halic is unable todetermine whether or\nnot thiskey is unique within the cluster.Duplicate keys\nwill preventnodes from rejoining thecluster.\n\nDo you wish tocontinue? [Y/N]:

HAD11292

YYErrorUser name is a reserved word orcontains invalid character(s)

HAD11300

YYErrorSystem can not be restarted:err:%1

HAD11301

YYErrorExiting: HAD has encountered acritical error. Please checkVCS_HOME/log/drwatson forlogs

HAD11303

NYWarningPlease enter valid Englisharguments

HAD11304

NYWarningConfiguration must beReadWrite

HAD11309



AlertEnabled

EventEnabled


EventID

YYErrorUser name should be of theformat user@domain

HAD11316

NYWarning‘%1’ is an invalid debug log tag.HAD11317

NYWarningCannot specify both -sev and-dbg

HAD11318

NYWarningThe -parameters option must bethe last option specified

HAD11319

NYWarningMust also specify -parameterswhenusing the -encoding option

HAD11320

NYWarningInvalid message specifiedHAD11321

NYWarningInvalid system specifiedHAD11322

NYWarningInvalid severity specifiedHAD11323

NYWarningInvalid debug level specifiedHAD11325

NYWarningMessage IDmust beunder 65535HAD11327

NYWarningInvalid message ID specifiedHAD11328

NYWarningInvalid encoding specifiedHAD11329

NYWarningInvalid parameters specifiedHAD11330

YYErrorExiting:Cannot register withSCM(service ctl manager) .err:%1.

HAD11331

NYWarningError - %1 (%2) in file %3:%4HAD12021

NYWarningFailed to get working directoryHAD12022

NYWarningUnsuccessful openof ipmserviceHAD12023

NYWarning%1 %2 has anAdministrators/Operators listwithout any users defined

HAD12025

NYWarningTypes file should have a .%1extension

HAD12026


24


AlertEnabled

EventEnabled


EventID

NYWarningCannot mkdir %1HAD12027

NYWarningCannot chdir %1HAD12028

NYWarning%1 does not have a listHAD12029

NYWarningCannot open lock file: errno=%1HAD12030

NYWarningConfiguration lockedHAD12031

NYWarningCannot create file: %1HAD12032

NYWarningCannot open file: %1HAD12033

NYWarningUser %1 in %2 %3 %4HAD12034

NYWarningError deleting file: %1HAD12035

NYWarningSource file should have a .%1extension

HAD12036

NYWarningIncorrect syntax for value ofattribute SourceFile for type %1: %2

HAD12037

YYErrorExiting: Cannot chdir %1.HAD12038

NYWarningCannot open file: %1 error = %2HAD12039

NYWarningFailed to change to workingdirectory

HAD12040

NYWarningKeyword i18nstr found :%1\nLocalized input notallowed.

HAD12041

NYWarningFailed to dump the configurationfrom the live engine

HAD12043

NYWarningConfiguration staleHAD12046

NYWarningCannot fork %1HAD12047

NYWarningDestination file should have a.%1 extension

HAD12048

NYWarningIllegal group dependency clauseHAD12051



AlertEnabled

EventEnabled


EventID

NYWarningCannot open input file: %1HAD12054

NYWarningUnexpected EOF: %1HAD12055

NYWarningParent resource %1 does notexist %2

HAD12056

NYWarningChild resource%1does not exist%2

HAD12057

NYWarningUnknown type %1 %2HAD12058

NYWarningExpecting -keysHAD12059

NYWarningCannot find attribute %1HAD12060

NYWarningScalar attributes cannot havemultiple values

HAD12061

NYWarningCannot find resource %1HAD12062

NYWarningUnknown subcommand %1HAD12065

NYWarningNot enough argumentsHAD12066

NYWarningUnexpected attribute %1HAD12071

NYWarningCannot find group %1HAD12076

NYWarningCannot find system %1HAD12083

NYWarningExpecting haevent -addHAD12085

NYWarningUnknown event %1HAD12086

NYWarningUnknown command %1HAD12087

NYWarningUnknown event subcommand%1

HAD12088

NYWarningUnexpected message: %1HAD12089

NYWarningUnknown message: %1HAD12090

NYWarningIpm send failureHAD12092

NYWarningRecvb failureHAD12093


26


AlertEnabled

EventEnabled


EventID

NYWarningAborting hacf: errorsencountered

HAD12095

NYWarningDuplicate definition for %1 at%2:%3

HAD12097

NYWarningParent resource %1 and childresource%2donot belong to thesame group

HAD12102

NYWarningCannot find attribute def for%1.%2

HAD12103

NYWarningExpecting a list for %1HAD12104

NYWarningCannot open output %1HAD12105

NYWarningIpm sendrecvb failureHAD12109

NYWarningConfiguration may contain onlyone cluster clause

HAD12111

NYWarningSystem %1 defined more thanonce

HAD12113

NYWarningGroup %1 defined more thanonce

HAD12114

NYWarningGroup %1 cannot have morethan one group dependencyclause

HAD12115

NYWarningGroup %1 has a local attributewithout a SystemList

HAD12116

NYWarningSystem %1 not on SystemList ofgroup %2

HAD12117

NYWarningQualified name not foundHAD12120

NYWarningValue for attribute%1not foundHAD12121

NYWarningReserved word - %1 - cannot beused to name objects orattributes

HAD12122



AlertEnabled

EventEnabled


EventID

NYWarningType%1definedmore thanonceHAD12123

NYWarningCannot find group %1 %2HAD12127

NYWarningResource%1 is%2 andmust nothave children

HAD12128

NYWarningResource %1 in a cycleHAD12129

NYWarningGroup %1 does not existHAD12130

NYWarningGroup %1 contains groupdependency cycles

HAD12131

NYWarningGroup %1 contains too deepgroup dependency

HAD12133

NYWarningSystemList for group %1containsnon-existent system%2

HAD12134

NYWarningGroup %1 has an AutoStartListwithout a SystemList

HAD12135

NYWarningSystem %1 in the AutoStartListof group %2

HAD12136

NYWarningInvalid Resource Type %1 ingroup %2

HAD12137

NYWarningCannot find type %1HAD12138

NYWarningResource Type %1 occurringmore than once in dependencyattribute for group %2

HAD12139

NYWarningGroup %1 has SystemZoneswithout a SystemList

HAD12140

NYWarningSystem %1 in the SystemZonesof group %2

HAD12141

NYWarningAttribute %1 for %2 cannot bespecified both local and global

HAD12142

NYWarningAttribute %1 for %2 specifiedlocal on %3 more than once

HAD12143


28


AlertEnabled

EventEnabled


EventID

NYWarningReserved word - %1 - cannot beused to name objects orattributes: %2

HAD12144

NYWarningSystemList does not have a listHAD12145

NYWarningGroup %1 has a local attribute%2 without SystemList

HAD12146

NYWarningLocal system not specified for%1 in group %2

HAD12148

NYWarningLocal system was specified fornon local attribute %1 in group%2

HAD12149

NYWarningDuplicate event item name %1%2

HAD12150

NYWarningDuplicate event name %1 %2HAD12151

NYWarningBad include line in file %1:%2HAD12155

NYWarningNo group definedHAD12156

NYWarningAutoStartList doesnothave a listHAD12158

NYWarningUnable to get list of types filesfrom VCS engine

HAD12159

NYWarningSingle slash not allowedHAD12160

NYWarningQuotes mismatchHAD12161

NYWarningUnexpected group dependencyHAD12162

NYWarningNo name given for clusterHAD12163

NYWarningNo name given for groupHAD12164

NYWarningNo name given for systemHAD12165

NYWarningNo name given for typeHAD12166

NYWarningCannot change file permissionsof %1

HAD12167



AlertEnabled

EventEnabled


EventID

NYWarningCannot find HeartBeat %1HAD12168

NYWarningAttempting to add RemoteCluster %1. It is already theexisting local cluster

HAD12169

NYWarningAttempting to add Cluster%1. Itis already an existing remotecluster

HAD12170

NYWarningHeartbeat %1 is defined morethan once

HAD12171

NYWarningRemote Cluster %1 is definedmore than once

HAD12172

NYWarningRemoteClustername%1 is sameas the local cluster name

HAD12173

NYWarningNo name given for heartbeatHAD12174

NYWarningNo name given for RemoteCluster

HAD12175

NYWarningCluster%1defined inClusterListof Heartbeat %2 is not a remotecluster

HAD12177

NYWarningLocal Cluster name and value ofCluster attribute ClusterNamemust be the same

HAD12178

NYWarningMust specify name and IPaddress of Remote Cluster to beadded

HAD12180

NYWarningRemote Cluster Name missingHAD12181

NYWarning%1 is not an existing RemoteCluster

HAD12182

NYWarningCannot override attribute %1HAD12183

NYWarningClusterList of heartbeat%1doesnot have a list

HAD12184


30


AlertEnabled

EventEnabled


EventID

NYWarningHeartbeat %1 has a localattribute%2without ClusterList

HAD12185

NYWarningCluster %1 not on ClusterList ofheartbeat %2

HAD12186

NYWarningCluster%1defined inClusterListof Group %2 is not a local orremote cluster

HAD12187

NYWarningClusterList for group %1 doesnot have a list

HAD12188

NYWarningCluster-scope not specified forlocal attribute %1 in heartbeat%2

HAD12189

NYWarningCluster-scope was specified forglobal attribute %1 in heartbeat%2

HAD12190

NYWarningLine %1 of file %2 is not inUTF-8 format

HAD12191

NYWarningUndefined Type : %1 %2HAD12193

NYWarningMandatory attribute Missing :%1.%2

HAD12194

NYWarningConfiguration does not containa Heartbeat object

HAD12196

NYWarningGroup %1 has a local harddependencywith levelmore than1

HAD12197

NYWarningGroup %1 has multiple localhard parents

HAD12198

NYWarning%1 and %2 cannot have thesame ClusterAddress

HAD12199

NYWarningClusterAddress not defined for%1

HAD12200

NYWarningNo name given for resource : %1HAD12201



AlertEnabled

EventEnabled


EventID

NYWarningDuplicate system name inSystemList of %1

HAD12202

NYWarningGroup ClusterService cannothave any parent group

HAD12203

NYWarningGroup ClusterService cannothave any child group

HAD12207

NYWarningGroup %1 :ClusterFailOverPolicy should beone of Manual

HAD12208

NYWarningGroup %1 : Authority should beeither 0 or 1

HAD12210

NYWarningIPM Receive ErrorHAD12211

NYWarningIPM Protocol ErrorHAD12212

NYWarningAttribute %1 for %2 specifiedmore than once

HAD12213

NYWarningIPM Send ErrorHAD12214

NYWarningInsufficient space in %1 fortemporary files

HAD12216

NYWarningFailed to open temporary filesHAD12217

NYWarningCould not create temporary filesin %1

HAD12218

NYWarningError encounteredwhilewritingtemporary files : %1

HAD12219

NYWarningCannot open file specified in theinclude statement: %1

HAD12221

NYWarningInvalid IP address assigned toClusterAddress of remote cluster%1

HAD12222

NYWarningGroup %1 depends on anon-existing group : %2

HAD12223


32


AlertEnabled

EventEnabled


EventID

NYWarningOfflining parent group %1 onsystem %2

HAD13310

NYErrorCannot find attribute(%1) in theresource type description

HAD13326

NYErrorCannot find attribute(%1) in theresource attribute list

HAD13327

NYWarningUnable to update attributeResourceInfo\n

HAD13332

NYWarningUsage errorHAD13338

NYWarningSystemnameshould be specifiedwith cluster

HAD13340

NYWarningIncorrect arguments to actionHAD13341

NYWarningNo overridden attributesHAD13342

NYWarningNo overridden attributes inresources

HAD13344


HAD13345


HAD13346

NYWarningNo overridden attributes in anyresource

HAD13347

NYWarningCannot specifytype/group/attribute/system asvalues for any of the options tothe display command.

HAD13350

NYWarningInvalid option: %1HAD13351

NYWarningUsage error: Value missing foroption %1

HAD13352

NYWarningError in converting the inputstring into UCS-2 encoding.Output may be truncated

HAD13357



AlertEnabled

EventEnabled


EventID

NYWarningError in converting the inputstring into UTF-8 encoding.Output may be truncated

HAD13358

NYWarningResource %1 does not belong totypes(%2)\n

HAD13463

NYWarningResource %1 does not belong togroups(%2) \n

HAD13464

NYWarningResource %1 does not belong totypes(%2) or groups(%3) \n

HAD13465

NYWarningNo overridden attributes inresources %1 or no resource in(%2) belongs to type(s) %3\n

HAD13466

NYWarningNo overridden attributes inresources %1 or no resource in(%2 belongs to group(s) %3\n

HAD13467

NYWarningNo overridden attributes inresources %1 or no resource in(%2) belongs to type(s) %3 andgroup(s) %4

HAD13468

NYWarningNo overridden attributes inresources %1

HAD13469

NYErrorConfig file %1 does not exist.Forming a one node cluster

HAD14001

NYErrorNode config file %1 does notexist. Forming a onenode cluster

HAD14002

NYWarningNodeid is%1.Formingaonenodecluster and setting nodeid to 0

HAD14005

NYErrorUnsuccessful open of service%1HAD14007

NYWarningHeartbeat did not contain 6fields

HAD14016

NYWarningEjectmyself: Detectedmynodeidin membership %1

HAD14017


34


AlertEnabled

EventEnabled


EventID

NYErrorDeleting ipmhandle: Noheartbeats received fromnodeid%1on link%2current time=%3past time = %4

HAD14020

NYWarningioctl error while registering IPaddress %1

HAD14021

NYWarningFailed to execute process: %1.Errno is %2

HAD16007

NYWarningFailed to create process: %1.Errno is %2

HAD16008

NYWarningError in executing command:%1. Errno is %2

HAD16009

NYWarningNotifier:Expected SNMPmanagers machine name

HAD17001

NYWarningNotifier:Severity out of rangeHAD17002

NYWarningNotifier:Unexpected optionHAD17003

NYWarningNotifier:Expected SMTP servername

HAD17004

NYWarningNotifier:Expectedmail recipientsname

HAD17005

NYWarningNotifier:Expected SNMP and | orSMTP options

HAD17006

NYWarningNotifier:exit byNOTIFIER_DISCONNECT msg.Connected to %1

HAD17007

NY

Y

WarningNotifier:cannot connect toipmserver

HAD17009

NYWarningNotifier:cannot create threadHAD17010

NYWarningNotifier:cannot communicate toVCS

HAD17011



AlertEnabled

EventEnabled


EventID

NYWarningNotifier:sendMSG_NOTIFIER_CONNECTfailure

HAD17012

NYWarningNotifier:IPM connection failedHAD17013

NYWarningNotifier:exit byNOTIFIER_DISCONNECT msg.Connected to unknown host

HAD17014

NYWarningNotifier:receive messagesunknown minor

HAD17015

NYWarningNotifier:sendMSG_NOTIFIER_ACK failed

HAD17016

NYWarningNotifier:receive unknownmessage from VCS

HAD17017

NYWarningNotifier:cannot create PDU forsnmp trap

HAD17018

NYWarningNotifier:cannot get local IPaddress

HAD17019

NYWarningNotifier:cannot create snmp trapOID

HAD17020

NYWarningNotifier:cannot allocatememoryfor %1

HAD17021

NYWarningNotifier:%1 undefinedHAD17022

NYWarningNotifier:%1 command failureHAD17023

NYWarningNotifier:wrong service grouptype

HAD17024

NYWarningNotifier:wrong heartbeat typeHAD17025

NYWarningNotifier:cannot open snmpsession to %1

HAD17026

NYWarningNotifier:cannot send snmp trapHAD17027


36


AlertEnabled

EventEnabled


EventID

NYWarningNotifier:cannot close snmpsession

HAD17028

NYWarningNotifier:unknown errorHAD17029

NYWarningNotifier:cannot verify recipient%1

HAD17030

NYWarningNotifier:activated signal %1HAD17031

NYWarningNotifier:sendMSG_NOTIFIER_DISCONNECTfailed

HAD17032

NYWarningNotifier:cannot get snmp trapsup time

HAD17033

NYWarningNotifier:SNMP error %1HAD17034

NYWarningNotifier:SNMP unknown errorHAD17035

NYWarningNotifier:SMTP error %1HAD17036

NYWarningNotifier:SMTP unknown errorHAD17037

NYWarningNotifier:value of option%1 is outof range

HAD17038

NYWarningNotifier:unknown trap IDHAD17039

NYWarningNotifier:unknown entities typeHAD17040

NYWarningNotifier:unknown entitiessubtype

HAD17041

NYWarningNotifier:options wrong order.Entity typemust bedefine beforeentity subtypes

HAD17042

NYWarningNotifier:sendMSG_NOTIFIER_NOTIFY failure

HAD17043

NYWarningNotifier:response toMSG_NOTIFIER_ALIVE failure

HAD17045



AlertEnabled

EventEnabled


EventID

NYWarningNotifier:%1 command failure for%2

HAD17046

NYWarningNotifier:Setting message Queuesize to default value as valuespecified is less than default

HAD17047

NYWarningNotifier:Message %1 is beingdeleted sincemessage cannot bedelivered for more than a hour

HAD17049

NYWarningNotifier:Unhandled exceptionoccurred

HAD17050

NYWarningNotifier:Unable to connect to%1HAD17051

NYWarningNotifier:Mail server specifieddoes not support SMTP VRFYcommand. Email user cannot beverified

HAD17053

NYErrorULF_CLI | ULF_AGTHAD40000

NYWarningCannot connect toVCSsimulatorHAD40001

NYErrorPasswords do not matchHAD40002

NYErrorError: Nodeid(%1 should be lessthan maxnodes(%2 This nodecannot join the cluster

HAD40004

NYErrorError: Cannot Initialize SocketHAD40006

NYErrorError: Unsuccessful open ofservice

HAD40007

NYWarningUnable to specify -status fromthe command line. %1

HAD40009

NYErrorError: invalid type %cHAD40016

NYErrorPasswords do not match enteragain

HAD40024

NYWarningOn the FAULTED cluster %1HAD40103


38


AlertEnabled

EventEnabled


EventID

NYWarning%1 %2HAD40113

NYWarning%1 %2 %3HAD40114

NYWarningCannot specify both -localclusand -clus options

HAD40115

NYWarning-localclus should be the lastoption.

HAD40116

NYWarningNo records found matching thespecified conditions\n

HAD40125

NYErrorCould not copy the sampleconfiguration files

HAD49001

NYErrorCannot findVCS_SIMULATOR_HOME

HAD49002

NYErrorCannot gather Simulator portconfigurations for cluster %1

HAD49003

NYErrorPort specified is alreadyconfigured in this configuration.

HAD49004

NYErrorConfiguration files created butcould not update the simconfigfile.

HAD49007

NYErrorCannot find default simulatorconfiguration.

HAD49008

NYErrorDirectory for the specifiedcluster already exists. Cannotcontinue to configure.

HAD49009

NYErrorCannot write to file: %1HAD49015

NYErrorSimulator is already running onport ‘%1’ for cluster ‘%2’.

HAD49017

NYErrorCould not find port informationfor the cluster %1. Specifiedcluster may not be configured.

HAD49018



AlertEnabled

EventEnabled


EventID

NYErrorCould not connect to the cluster%1. It may not be Running.

HAD49019

NYErrorCould not stop SimServer. Errorreported: %1

HAD49020

NYErrorCannot gather cluster nameinformation for port %1

HAD49021

NYWarningGroup %1’s prerequisites havenot been fullymet on system%2

HAD50000

NYWarningInitiating auto-start online ofgroup %1

HAD50007

NYErrorSetting SYSSTATE toRSM_EXITED for node : %1.

HAD50016

NYWarningprocess_cluster() - receivedMSG_CLUSTER_DIE_DUPLICATE_NAMEfrom node: %1. Will Exit now.

HAD50018

NYWarningThere are no enabled resourcesin the group %1 to online

HAD50036

NYErrorDisabled resource:%1 cannot beonlined

HAD50039

NYErrorAll the resources in group arenot completely offline

HAD50040

NYWarningFor system %1 LLTNodeId:%2and NodeId:%3 do not match

HAD50043

NYWarningFor system%1check if llttab filehas correct set-node entry withreference to the llthosts file. VCSengine will exit to prevent anyinconsistency

HAD50044

N

N

YWarningInitiating online of parent group%s

HAD50045

NYWarningInitiating online of parent group%1 on node %2

HAD50046


40


AlertEnabled

EventEnabled


EventID

NYWarningClearing parent group %1’smigrateq

HAD50047

NYWarningMigrating child %1 from node%2

HAD50048

NYWarningInitiating online of child group%1

HAD50049

NYWarningMigrating parent %s from node%1

HAD50050

NYWarningFailed to read GAB message %1time(s) due to insufficientmemory.

HAD50051

NYWarningInsufficientmemory to readGABmessage. Panic system.

HAD50052

NYWarningInsufficientmemory to readGABmessage. Exiting.

HAD50053

NYWarningCommand (%1) failed. ClusterAdministrator or GroupAdministrator privilege required

HAD50100

NYWarningCommand (%1) failed. ClusterAdministrator privilege required

HAD50101

NYWarningCommand (%1) failed. At leastCluster Operator privilegerequired

HAD50102

NYWarningCommand (%1) failed. At leastGroup Administrator privilegerequired

HAD50103

NYWarningCommand (%1) failed. At leastGroup Operator privilegerequired

HAD50104

NYWarningCommand (%1) failed. Usershould be a %2

HAD50105

NYWarninghacli is disabledHAD50112



AlertEnabled

EventEnabled


EventID

NYWarningInvalid value %1 for key %2HAD50114



NYWarningInvalid value %1 for key %2 cannot modify key for this value

HAD50117

NYWarning%1 is not a valid key forCPUUsageMonitoring

HAD50118

NYErrorError in disabling CPUUsagemonitoring: %1

HAD50119

NYErrorError in enabling CPUUsagemonitoring: %1

HAD50120

NYErrorError in reading CPUUsage: %1HAD50121

NYErrorInvalid CPUUsage obtained: %1HAD50122

NYErrorCPUUsage: %1 exceededActionThreshold: %2 on system%3

HAD50123

NYWarningCPUUsage: %1 exceededNotifyThreshold: %2 on system%3

HAD50124

NYWarningGroup%1 is not yet fully probedon system %2

HAD50126

NYWarningUser %1HAD50132

NYWarningUser %1HAD50134

NYWarningSome resources are in ADMINWAIT state on system %1

HAD50138

NYWarningClearing themigrateq for parentgroup %1

HAD50141

NYErrorADMIN_WAIT flag set forresource %1 on system %2 withthe reason %3

HAD50148


42


AlertEnabled

EventEnabled


EventID

NYErrorUnsuccessful get of PDRs (%1)HAD50300

NYWarningUnsuccessful in getting PDattributes (%1)

HAD50301

NYErrorUnsuccessful search fornon-rootdomain.

HAD50302

NYErrorUnsuccessful creation of privatedomain inAuthenticationBrokerfor VCS Engine(%1) %2

HAD50303

NYErrorUnsuccessful in getting PrivateDomain attributes (%1)

HAD50304

NYErrorUnsuccessful creation ofPrincipal in AuthenticationBroker for VCS Engine(%1)

HAD50305

NYErrorFailed to initialize securecommunication library (%1)

HAD50307

NYErrorSecurity ON. Init failed. Clientswill be rejected

HAD50309

NYErrorUnable to get FQDNforhost (%1)HAD50312

NYErrorRemote cluster %1 cannot bedeleted as it is in the %2 state

HAD50505

NYErrorRemote cluster %1 cannot bedeleted as it is a part of theclusterlist for group %2

HAD50506

NYErrorRemote cluster %1 cannot bedeleted as it is a part of theclusterlist for heartbeat %2

HAD50507

NYErrorNumber of clusters in theClusterList attribute for group%1 is different between clusters%2 and %3

HAD50523



AlertEnabled

EventEnabled


EventID

NYErrorCluster %1 does not exist in theClusterList attribute for group%2 in cluster %3

HAD50524

NYErrorGroup %1’s ClusterList priorityfor cluster %2 is differentbetween clusters %3 and %4

HAD50526

NYErrorClusterList values for globalgroup %1 differ between theclusters. Not attempting toonline group in local cluster

HAD50528

NYErrorRemote cluster%1doesnot existin the ClusterList attribute forgroup %2 in local cluster %3

HAD50529

NYErrorGroup %1’s ClusterList priorityfor cluster %2 is differentbetween local cluster %3 andremote cluster %4

HAD50530

NYErrorNumber of clusters in theClusterList attribute for group%1 is different between localcluster %2 and remote cluster%3

HAD50531

NYWarningSimulator switched local systemto %1

HAD50624

NYWarningSystem (%1) is already upHAD50625

NYErrorCannot bring system %1 upHAD50626

NYErrorCannot bring system %1 upHAD50627

NYWarningSystem %1 is the last runningnode in the cluster. Stop thecluster instead of powering offthis system

HAD50628

NYWarningRemote cluster nameneeds to bespecified.\n

HAD50702


44


AlertEnabled

EventEnabled


EventID

NYWarningIncorrect remote clusterspecified

HAD50704

NYWarningMust specify a system nameHAD50705

NYWarningIncorrect cluster specifiedHAD50706

NYWarningIncorrect optionHAD50710

NYWarningInsufficient argumentsHAD50711

NYWarningBad parameterHAD50712

NYWarningSpecify one remote clusterHAD50713

NYWarningPlease specify the heartbeat andattribute name.

HAD50714

NYWarningMust specify a system name oruse the -all option

HAD50717

NYWarningUnexpectedmessage0x%1whileprocessing alerts from engine

HAD50727

NYWarningInvalid alert ID specifiedHAD50728

NYWarningInvalid description specifiedHAD50729

NYWarningIncorrect category ID specifiedHAD50731

NYWarningNeed to specify a description ofwhy alert is being deleted

HAD50739

NYWarningClusterService group is notproperly configured on cluster%1

HAD50743

NYErrorRemote cluster%1doesnothaveAuthority for global group %2.Not attempting to online in localcluster

HAD50757

NYWarningNot initiating online of parentgroup %1 after child onlinebecause parent group is indeferred AutoStart

HAD50758



AlertEnabled

EventEnabled


EventID

NYWarningNot initiating online of parentgroup%1after child online sincelocal cluster does not haveAuthority for parent group

HAD50759

NYWarningGroup %1 is unable to go onlineon any system in cluster %2

HAD50809

NYErrorCommand (%1) failed. At leastGroup Operator privilegerequired on remote cluster %2

HAD50824

NYWarningUnable to display alerts. Anerrorhas occurred while requestingalerts from engine

HAD50850

NYWarningAn error has occurred whilereceiving alerts from engine

HAD50851

NYErrorError opening LDF file for ‘%1’HAD50878

NYErrorInvalid log messageHAD50879

NYErrorCommand (%1) failed.TheGroup%2 cannot be frozen

HAD50894

NYWarningRemote cluster %1 wasdetermined to be the nextsuitable failover target for group%2. Not initiating online ofgroup

HAD50895

NYErrorRemote cluster %1 has faulted.Determining if global group %2should be failed over to localcluster

HAD50908

NYErrorUnable to find a suitable remotefailover target for Group %1.

HAD50909

NYErrorLocal cluster was determined tobe the next suitable failovertarget for Group %1. Initiatingonline of group

HAD50910


46


AlertEnabled

EventEnabled


EventID

NYWarningUnable to fail over global group%1 in local cluster. Attemptingto fail group over to a remotecluster [ClusterFailoverPolicy =%2]

HAD50911

NYErrorCONCURRENCYVIOLATION:Group %1 is onlineon the following clusters [%2]

HAD50921

NYWarningInvalid group %1 specifiedHAD50922

NYWarningLocal cluster was not grantedAuthority for group %1

HAD50926

NYWarningReceived invalid message 0x%1HAD50927

NYWarningGroup%1 could not go online onremote system%2.Not initiatingoffline of group

HAD50931

NYWarningGroup %1 could not go online inremote cluster%2.Not initiatingoffline of group

HAD50932

NYWarningUnable to AutoStartHAD50934

NYWarningInvalid remote group message0x%1

HAD50952

NYWarningRemote group name is requiredHAD50953

NYWarningCould not find cluster %1HAD50954

NYWarningRemote group %1 does not existin cluster %2

HAD50955

NYErrorGlobal group %1 is faulted onsystem %2 in cluster %3

HAD50961

NYErrorAutoFailOver value for group%1is different between local cluster%2 and remote cluster %3

HAD50965



AlertEnabled

EventEnabled


EventID

NYErrorClusterFailOverPolicy value forgroup %1 is different betweenlocal cluster %2 and remotecluster %3

HAD50966

NYWarningInvalid remote resourcemessage0x%1

HAD50972

NYWarningRemote resource name isrequired

HAD50973

NYWarningRemote type name is requiredHAD50974

NYWarningCould not find group %1 oncluster %2

HAD50977

NYWarningRemote resource %1 does notexist in cluster %2

HAD50978

NYError[Licensing] You have %1 day(s)left in your %2 featureevaluation period

HAD50979

NYError[Licensing] Your evaluationperiod for the %1 feature hasexpired. This feature will not beenabled thenext timeVCS starts

HAD50980

NYErrorResource%1 is faultedonsystem%2 in cluster %3

HAD50981

NYWarningInvalid remote system message0x%1

HAD50984

NYWarningRemote systemname is requiredHAD50985

NYWarningRemote system%1doesnot existin cluster %2

HAD50987

NYErrorSystem%1has faulted in cluster%2

HAD50992


48


AlertEnabled

EventEnabled


EventID

NYWarningLocal cluster has Authority forgroup %1 but is unable tocommunicate with other remoteclusters. Postponing AutoStartfor %2 seconds

HAD50993

NYWarningLocal cluster does not haveAuthority for group %1. Notinitiating AutoStart of group onsystem %2 after probe

HAD50994

NYWarningofflining (path) group %1 on %2HAD51000

NYWarningMigrating child %1 from node%2 to %3

HAD51001

NYErrorInvalid Timeout message 0x%1HAD51004

NYErrorTimeout with ID = %1 alreadyexists

HAD51005

NYErrorInvalid Timeout type 0x%1HAD51006

NYErrorTimeout with ID = %1 does notexist

HAD51007

NYWarningUnknown Axis flag 0x%1HAD51008

NYWarningCluster %1 does not existHAD51018

NYWarningGlobal group %1 is faulted dueto a persistent resource fault.Not settingRestart because localcluster does not have Authorityfor group

HAD51027

NYWarningUnable to grant Authority tocluster %1 since local cluster nolonger has Authority for group%2

HAD51040

NYWarningUnable to grant cluster %1Authority for group %2 sincegroup is online/partial in localcluster

HAD51041



AlertEnabled

EventEnabled


EventID

NYWarningUnable to grant cluster %1Authority for group %2 sincegroup is in themiddle of a groupoperation

HAD51043

NYWarningUnable to grant cluster %1Authority for group %2 sincechild group %3 is in the middleof a group operation

HAD51045

NYWarningCannot switch global group %1.Cluster %2 is unable to locateAuthority for group

HAD51050

NYErrorVCS engine rejected connectionrequest from wide areaconnector because group %1 isnot properly configured

HAD51060

NYErrorVCS engine rejected connectionrequest from wide areaconnector because group %1 isnot running on local system %2

HAD51061

NYErrorVCS engine rejected connectionrequest from wide areaconnector because a connectionwith thewide area connector hasalready been established

HAD51062

NYWarningLinkHandle::events select failederrno=%1

HAD52501

NYErrorLinkHandle::open Cannot findusable Winsock.dll or correctversion of Winsock.dll

HAD52502

NYWarningLinkHandle::open Cannot findprotocol information for TCP

HAD52503

NYWarningLinkHandle::opengethostbyname failed for %1

HAD52504


50


AlertEnabled

EventEnabled


EventID

NYWarningLinkHandle::openUnrecognizableAddress Format%1

HAD52505

NYErrorLinkHandle::openCannot createsocket. errno = %1

HAD52506

NYWarningLinkHandle::open setting closeon exec failed errno = %1

HAD52508

NYWarningLinkHandle::open select failederrno = %1

HAD52509

NYWarningLinkHandle::open set tononblocking mode failed errno= %1

HAD52510

NYWarningLinkHandle::open Cannot findservice information for%1errno= %2/tcp

HAD52511

NYWarningLinkHandle::open getpeernamefailed errno = %1

HAD

HAD

52512

NYWarningLinkHandle::openfcntl(FD_CLOEXEC) failed errno= %1

HAD52513

NYWarningLinkHandle::send peer exitederrno = %1

HAD52514

NYWarningLinkHandle::send peer closedHAD52515

NYWarningLinkHandle:recvb _read_errno is%1

HAD52516

NYWarningLinkHandle::recv peer exitederrno=%1

HAD52517

NYWarningLinkHandle::sendrecvb send() !=IPM_SUCCESS

HAD52518

NYWarningLinkHandle::sendrecvb recvb()!= IPM_SUCCESS

HAD52519



AlertEnabled

EventEnabled


EventID

NYErrorLinkHandle::sendrecvbUnexpected message

HAD52520

NYWarningInvalid ChannelHAD52521

NYWarningLinkServer::open Cannot findservice information for %1/tcp

HAD52522

NYWarningLinkServer::open Cannot findprotocol information for TCP

HAD52523

NYErrorLinkServer::open Cannot createsocket errno = %1

HAD52524

NYWarningLinkServer::openSO_REUSEADDR failed errno =%1

HAD52525

NYWarningLinkServer::open Bind Failederrno = %1

HAD52526

NYWarningLinkServer::open Listen Failederrno = %1

HAD52527

NYWarningLinkServer::accept failed errno= %1

HAD52528

NYWarningLogin IncorrectHAD52529

NYWarningCluster is not in RUNNING stateHAD52564

NYWarningBad cmd specifiedHAD52565

NYWarningBad system specifiedHAD52566

NYErrorCommand (%1) can not be runon a remote system

HAD52573

NYErrorSSL handshake failed %1HAD53000

NYErrorBroker (%1) unable toauthenticate logged on user (%2

HAD53005

NYErrorUnable to connect toVCS enginesecurely

HAD53006


52


AlertEnabled

EventEnabled


EventID

NYErrorError returned fromengine:HADon this node not acceptingclients.

HAD53007

NYErrorFailed to initialize securitylibrary (%1)

HAD53009

NYErrorAgent (%1) is exiting due tointernal error.

vcsagfw.dll13005

NYErrorCannot open stdin .. exitingVCSAgTestClient13133

NYErrorError receiving from the agent.Exiting

VCSAgTestClient13134

NYErrorError sending to the agent.Exiting


NYErrorCould not connect to port %1IPM error(%2)


NYWarningCould not get port number forthe service %1. Will try port %2

VCSAgTestServer13137

YYErrorCould open IPM server on port%1. Exiting


NYWarningInvalid status message receivedfor Resource(%1


YYErrorError: Cannot find usableWinsock.dll or correct version ofWinsock.dll


YYErrorThe following commands aresupported:\n (Use‘help<command>' for moreinformation on using<command> \n )


YYErrorCannot understand input -- typehelp for list of commands


YYErrorAgent %1 has either not startedor has not connected




AlertEnabled

EventEnabled


EventID

YYErrorUnknown agent (%1) is trying toconnect


YYErrorAgentid (%1) already exists --cannot start two agents with thesame id


YYErrorError(%1) opening (%2)VCSAgTestServer13383

YYErrorCannot execute %1VCSAgTestServer13384

YYErrorSends a message to an agent toonline a resource


YYErrorSends a message to an agent toadd a resource


YYErrorSends a message to an agent todetermine the status of aresource


YYErrorSends a message to an agent todelete a resource


YYErrorSends message to an agent tooffline a resource


YYErrorStarts an agent and assigns it aname


YYErrorThe default value of is

$VCS_HOME\\bin\\VCSAgDriver.exe


YYErrorThe default value of <filename>is$VCS_HOME/bin/<agentid>/<agentid>Agent


YYErrorSubsequent commands to thisagentmust specify <agentid> asthe first arg


YYErrorsends a shutdownmessage to theagent specified by the <agentid>



54


AlertEnabled

EventEnabled


EventID

YYErrorDeletes an agent entry from thelist of agents started by thisprocess.


YYErrorPrints the ids of all the agentsstarted by this process


YYErrorSends a message to the agent<agentid> to\n - either list all thehash tables\n - or display aparticular hash table.


YYErrorSends a message to an agent todisplay the memory statistics ofthe\n internal C++ objects.


YYErrorSends a message to an agent toshow its CPU usage statistics


YYErrorSends a message to an agent toadd a resource type


YYErrorSends a message to an agent toadd an attribute to a resourcetype


YYErrorSends a message to an agent toadd an attribute to all theresources\n of a resource type


YYErrorSends a message to an agent tomodify an attribute of a resourcetype


YYErrorSends a message to an agent tomodify an attribute of a resource


YYErrorQuits this program. All theagents started by this processmust be \n stopped before thiscommand can be issued


YYErrorCannot quit: Please stop allAgents before quitting




AlertEnabled

EventEnabled


EventID

YYErrorUnknown command (%1) . Typehelp for the list of commands


YYErrorAgentid has not been specifiedVCSAgTestServer13410

YYErrorReceived theMSG_CLUSTER_CONN_INFOmessage with non string key


YYErrorNo value specified for key (%1)VCSAgTestServer13412

YYErrorValue of key %1 should be astring


YYErrorValue of key %1 should be aninteger


YYErrorPlease verify the argumentsVCSAgTestServer13420

GAB monitoring rulesTable 3-2 lists the GAB rules included in the VCS Management Pack.

Table 3-2 GAB Monitoring Rules

AlertEnabled

EventEnabled

SeverityRule NameModuleEvent ID

NYInformationalEvent loggingenabledfor GAB driver.

GAB1

YYErrorError in creati ngDevice Object in NTGab Driver.

GAB2

YYErrorA device w hich doesnot exist wasspecified.

GAB3

YYErrorThe I/O request wascancelled.

GAB4

VCS Management Pack monitoring rulesGAB monitoring rules

56

Table 3-2 GAB Monitoring Rules (continued)

AlertEnabled

EventEnabled


YYErrorInsufficient systemresources exist tocomplete the request.

GAB5

YYErrorNot enough memoryresources to completethe request.

GAB6

YYErrorThe access right tothe requested objecthas not been granted.

GAB7

YYErrorThe device for therequest is currentlybusy.

GAB8

YYErrorThe Object Nam ealready exists.

GAB9

YYErrorAn invalid parameterwas passed to afunction.

GAB10

YYErrorA protocol error wasdetected.

GAB11

YYErrorThe I/O devicereported an I/O error.

GAB12

YYErrorThe specifiedresources name cannot be found.

GAB13

YYErrorDriver report error on%2

GAB14

YYErrorDriver report %2GAB15

57VCS Management Pack monitoring rulesGAB monitoring rules

Table 3-2 GAB Monitoring Rules (continued)

AlertEnabled

EventEnabled


NYErrorGAB: Driverinformationdisplayedin data field below.Use Byte modedisplay and scrollpassed first 20 hexbytes starting atoffset 28 hex.

GAB18

LLT monitoring rulesTable 3-3 lists the LTT rules included in the VCS Management Pack.

Table 3-3 LLT Monitoring Rules

AlertEnabled

EventEnabled


YYErrorInternal Error: Incorrectheader size %2

LLT3

YYErrorInternal Error: Failed tocreate LLT device"

LLT4

YYErrorInternal error: Failed tocreate symbolic link

LLT5

YYErrorMemory allocation error%2

LLT6

YYErrorFailed to close the LLTlink %2

LLT7

YYErrorProtocol error:Acknowledgement inwindow but no messagesto zap %2

LLT8

YYErrorDuplicate cluster/nodedetected %2

LLT9

YYErrorLink disabled %2LLT10

VCS Management Pack monitoring rulesLLT monitoring rules

58

Table 3-3 LLT Monitoring Rules (continued)

AlertEnabled

EventEnabled


YYErrorLLT is disabledLLT11

YYErrorTimer was not called forquite sometime %2

LLT12

Agents monitoring rulesThe Agent Framework rules for each agent categorized appropriately underproperly named sub-folders.

VMDg event processing rulesTable 3-4 lists the VMDg agent rules included in the VCS Management Pack.

Table 3-4 VMDg Event Processing Rules

AlertEnabled

EventEnabled


NYWarningFailed to queryVxOb (Error= %d:%d).

VMDg9551

NYWarningFailed to startVxObService(Error = %d:%d).

VMDg9550

NYWarningFailed to open VxOb (Error= %d:%d).

VMDg9552

NYWarningFailed to unmount volumeVMDg9558

NYErrorVolume Manager Clustersupport components notinstalled.

VMDg9510

NYErrorCould not initialize VolumeManager connection. Error= %08X

VMDg9507

NYErrorCould not get SCM handle[%d:%d]

VMDg9509

59VCS Management Pack monitoring rulesAgents monitoring rules

Table 3-4 VMDg Event Processing Rules (continued)

AlertEnabled

EventEnabled


NYErrorCluster Server license is notenabled in VolumeManager.

VMDg9505

NYErrorDiskgroup not configuredVMDg9506

NYWarningQuery imported clusterdiskgroups : %s

VMDg9559

NYErrorInit diskgroup : %sVMDg9515

NYErrorInit diskgroup failed : Thediskgroup and GUID do notmatch

VMDg9615

NYErrorInit diskgroup failed[%d:%d]

VMDg9715

NYWarningQuery imported clusterdiskgroup state: %s

VMDg9553

NYWarningQuery SCSI Reservation :%s

VMDg9561

NYWarningOne or more disks in thisdiskgroup are unsteady.

VMDg9562

NYErrorOnline diskgroup : %sVMDg9513

NYWarningForce Import of diskgroupenabled.

VMDg9563

NYWarningDisk availability check : %sVMDg9566

NYErrorOnlinediskgroup. Less thanhalf of total disks availablein the diskgroup.

VMDg9511

NYErrorImport diskgroup failed[%d:%d]

VMDg9613

NYErrorOffline diskgroup : %sVMDg9514

NYErrorDeport diskgroup failed[%d:%d]

VMDg9614

VCS Management Pack monitoring rulesAgents monitoring rules

60

MountV agent event processing rulesTable 3-5 lists the MountV agent rules included in the VCS Management Pack.

Table 3-5 MountV Agent Event Processing Rules

AlertEnabled

EventEnabled


NYErrorVolume Manager Clustersupport components notinstalled.

MountV9001

NYErrorCould not initializeVolume Managerconnection. Error=%08X

MountV9002

NYErrorCluster Server license isnot enabled in VolumeManager

MountV9005

NYError%s not configuredMountV9006

NYWarningMount type unknown(%d:%d:%s)

MountV9007

NYWarningFailed to get volumeproperties [%d:%d]

MountV9008

NYWarningVolume %s is alsomounted as NTFS Foldermount(s) at %s

MountV9011

NYErrorCannot access volume%sMountV9010

NYWarningVolume%s isMounted as%s but configured as %s

MountV9012

NYWarningVolume %s is alreadymounted as NTFS Folder%s

MountV9013

NYWarningVolume %s has beenmounted multiple times(%s)

MountV9015

NYWarningVolume %s has also beenmounted as (%s)

MountV9016


Table 3-5 MountV Agent Event Processing Rules (continued)

AlertEnabled

EventEnabled


NYWarningVolume %s is alsomounted as Driveletter%s

MountV9009

NYWarningDiskgroup not presentMountV9017

NYWarningVolume not presentMountV9018

NYWarningConnection to VM notinitialized

MountV9019

NYWarningVolume %s is alreadymounted as Driveletter%s

MountV9014

NYWarning%s is not suitable forfolder mount [%d:%d]

MountV9020

NYWarning%s is not on an NTFSformatted volume

MountV9021

NYWarningFailed to unlock volume[%d:%d]

MountV9022

NYWarningFailed to lock volume[%d:%d]

MountV9023

NYWarningUnable to open volume[%d:%d]

MountV9031

NYErrorFailed to mount volume%s at %s [%d:%d]

MountV9024

NYErrorFailed to unmount thevolume from theconfigured mount path[%d:%d]

MountV9025

NYErrorFilesystem at %s is notclean [%d:%d]

MountV9026

NYErrorFailed to addadministrative share

MountV9027


62

Table 3-5 MountV Agent Event Processing Rules (continued)

AlertEnabled

EventEnabled


NYErrorFailed to deleteadministrative share[%d:%d]

MountV9030

ElifNone agent event processing rulesTable 3-6 lists the ElifNone agent rules included in the VCS Management Pack.

Table 3-6 ElifNone Agent Event Processing Rules

AlertEnabled

EventEnabled


NYErrorFile Name is notvalid

Agents2

FileNone agent event processing rulesTable 3-7 lists the FileNone agent rules included in the VCS Management Pack.

Table 3-7 FileNone Agent Event Processing Rules

AlertEnabled

EventEnabled


NYErrorFile Name is notspecified

Agents502

FileOnOff agent event processing rulesTable 3-8 lists the FileOnOff agent rules included in the VCS Management Pack.

Table 3-8 FileOnOffAgent Event Processing Rules

AlertEnabled

EventEnabled


NYErrorUnable to create the fileAgents1002

NNErrorUnable to delete the fileAgents1003


FileOnOnly agent event processing rulesTable 3-9 lists the FileOnOnly agent rules included in the VCSManagement Pack.

Table 3-9 FileOnOnly Agent Event Processing Rules

AlertEnabled

EventEnabled


NYErrorERROR! FileName is notvalid

Agents1502

NYErrorUnable to create the fileAgents1504

FileShare agent event processing rulesTable 3-10 lists the FileShare agent rules included in the VCS Management Pack.

Table 3-10 FileShare Agent Event Processing Rules

AlertEnabled

EventEnabled


NYErrorAttributevalue(s) invalidfor %s

FileShare10501

NYErrorSharename%s containsinvalid characters

FileShare10701

NYErrorFailed to initialize folder%s [%d:%d]

FileShare10502

NYErrorFailed to initializepermissions. [%d:%d]

FileShare10503

NYErrorFailed to attachpermissions. [%d:%d]

FileShare10504

NYErrorPathmismatch for share%s

FileShare10520

NYErrorMaxUsers for share %sis less than configured

FileShare10510

NYErrorFileShare Error : TheServer service is notavailable

FileShare10522


64

Table 3-10 FileShare Agent Event Processing Rules (continued)

AlertEnabled

EventEnabled


NYErrorThe share %s is of typePrint

FileShare10523

NYErrorThe share %s is of typeDevice

FileShare10524

NYErrorThe share %s is of typeIPC

FileShare10525

NYErrorThe share %s is of typeSpecial

FileShare10526

NYErrorThe share %s is of typeUnknown

FileShare10527

NYErrorUnknown error forfolder %s [%d:%d]

FileShare10506

NYErrorSystem error occurredfor folder %s Error [%d]

FileShare10521

NYErrorPermissions erroroccurred for folder %sError [%d]

FileShare10529

NYErrorFailed to get propertiesfor folder %s [%d:%d]

FileShare10507

NYErrorFailed to open folder %s[%d:%d]

FileShare10505

NYErrorThe folder %s may notbe shared by VCS

FileShare10528

NYErrorFolder %s (\\\\%s\\%s)already shared

FileShare10508

NYErrorFailed to share folder%sas (\\\\%s\\%s) [%d:%d]

FileShare10509

NYErrorFailed to unshare folder%s as (\\\\%s\\%s)[%d:%d]

FileShare10519


Internet Information Services (IIS) agent event processing rulesTable 3-11 lists the IIS agent rules included in the VCS Management Pack.

Table 3-11 Internet Information Services Agent Event Processing Rules

AlertEnabled

EventEnabled


NYWarningFailed to parse the argumentlist.

Agents13503

NYErrorFailed to allocatememory forIIS Service resource object.

Agents13505

NYError”Failed to find the serviceobject. Please check the\SiteType\”” attribute.(%s)”””

Agents13504

NYError”Failed to initialize IIS siteobject. [%d

Agents13506

NYError”Failed to create a newobjectfor (%s) service [%d

Agents13507

NYError”Arguments arenot specifiedcorrectly

Agents13556

NYErrorFailed to convert resourcename. Error %d

Agents13557

NYErrorFailed to convert theargument list. Error %d.

Agents13558

NYError”Configuration error.\Service\”” attribute is notconfigured.”””

Agents13559

NYError”Configuration error.\SiteName\”” attribute is notconfigured.”””

Agents13560

NYError”Configuration error.\IPResName\”” attribute isnot configured.”””

Agents13561

NYErrorInternal error IP (%s) Failedto convert IP address toASCII. Error Code: %d

Agents13562


66

Table 3-11 Internet Information Services Agent Event Processing Rules(continued)

AlertEnabled

EventEnabled


NYErrorIncorrect IP address (%s)Agents13563

NYError”Failed to start theapplication pool (%s). [%d

Agents13547

NYError”Failed to stop theapplication pool (%s). [%d

Agents13548

NYError”Failed to get the applicationpool state (%s). [%d

Agents13549

NYError”Failed to get the containerinterface %s [%d

Agents13524

NYError”Failed to enumerate theobject in container %s [%d

Agents13525

NYError”Failed to enumerate thenextobject in the container %s[%d

Agents13567

NYError”Failed to query interface%s[%d

Agents13526

NYError”Failed to get the applicationpool state. Please check theapplication pool name %s[%d

Agents13550

NYError”Failed to get the IIS webvirtual directory object %s[%d

Agents13551

NYError”Failed to start the one ormore application pools. [%d

Agents13552

NYError”Failed to start the defaultapplication pool (%s). [%d

Agents13568

NYError”Failed to get the applicationpool interface %s [%d

Agents13553

NYError”Failed to start theapplication pool %s [%d

Agents13554



AlertEnabled

EventEnabled


NYError”Failed to stop theapplication pool %s [%d

Agents13555

NYError”Failed to start the service(%s). [%d

Agents13508

NYError”Failed to start the IIS Site /Virtual Server (%s). [%d

Agents13509

NYError”Failed to initializeapplication pool object (%s).[%d

Agents13510

NYErrorFailed to get the service state(%s)

Agents13512

NYError”Failed to stop the IIS Site /Virtual Server (%s). [%d

Agents13514

NYError”Failed todetermine the stateof the site / virtual server(%s). [%d

Agents13516

NYError”Failed to get the applicationpool state andbindpath(%s).[%d

Agents13517

NYErrorCLEAN () Site Is running (%s).Agents25

NYError”Failed to get the IIS version[%d

Agents13518

NYError”Failed to get the serviceoperations interface %s [%d

Agents13519

NYError”Failed to get the status ofthe site %s [%d

Agents13520

NYError”Failed to start the site %s[%d

Agents13522

NYError”Failed to stop the site %s[%d

Agents13523


68


AlertEnabled

EventEnabled


NYError”Failed to get the object name%s [%d

Agents13527

NYError”Failed to get theServerComment %s [%d

Agents13528

NYError”Failed to get the ADsPath%s [%d

Agents13529

NYError”Failed to release the siteenumerate %s [%d

Agents13530

NYError”Failed to get the registry%s\CurrentMode\”” attributevalue [%d”

Agents13531

NYErrorFailed to find a usableWinSock DLL return value%d error code [%d]

Agents13533

NYErrorUnsupported WinSock DLLversion HIGHBYTE (%d)LOBYTE (%d )

Agents13534

NYErrorSocket call failedPortNumber (%ld) error (%ld)

Agents13511

NYErrorFailed to set the socket optionSO_DONTLINGERPortNumber (%ld) error (%ld)

Agents13535

NYErrorFailed to set the socket optionSO_REUSEADDRPortNumber (%ld) error (%ld)

Agents13536

NYErrorFailed to set the socket optionSO_KEEPALIVEPortNumber(%ld) error (%ld)

Agents13537

NYErrorFailed to set the I/O mode ofa socket FIONBIOPortNumber (%ld) error (%ld)

Agents13538



AlertEnabled

EventEnabled


NYErrorFailed to establish aconnectionwith the specifiedsocket PortNumber (%ld)error (%ld)

Agents13539

NYErrorFailed to receive data from aconnected socket error (%ld)

Agents13540

NYErrorFailed to receive data from aconnected socket timeout(%ld)

Agents13541

NYErrorFailed to determine thestatus of the socket error(%ld)

Agents13542

NYErrorFailed to create a IIS adminbase object (%ld) error (%ld)

Agents13543

NYErrorFailed to open metabase key%s (%ld) error (%ld)

Agents13544

NYErrorFailed to enumerate theparent key (%s) subkey(%s)status (%ld) error (%ld)

Agents13545

NYErrorFailed to find a index in themetabase for key(%s) (%ld)error (%ld)

Agents13546

NYError”Wait on critical sectionfailed [%d

Agents12

NYError”Failed to start service (%s)[%d

Agents40

NYWarningFailed to get the state of theservice (%s)

Agents13

NYError”Failed to stop the service(%s) [%d

Agents41

NYError”Failed to terminate theservice (%s) [%d

Agents42


70


AlertEnabled

EventEnabled


NYError”Failed to initialize theservice object (Service = %s)[%d

Agents43

NYErrorFailed to get the servicestatus (Service =%s). Error =%d

Agents44

NYError”Failed to open the serviceobject (Service = %s). [%d

Agents45

GenericService event processing rulesTable 3-12 lists the GenericService agent rules included in the VCS ManagementPack.

Table 3-12 GenericService Event Processing Rules

AlertEnabled

EventEnabled

SeverityRule NameModuleEventID

NYErrorFailed to convert theargument list. Error = %d.

GenericService6001

NYErrorThe ServiceName attributehas not been configured.

GenericService6002

NYErrorThe LanmanResNameattribute has not beenconfigured.

GenericService6026

NYErrorThe password attribute hasnot been configured.

GenericService6003

NYErrorFailed to lookup the accountname ‘%s’. Error = %d.

GenericService6005

NYWarningThe service ‘%s’ is not instopped state.

GenericService6007

NYErrorFailed to decrypt thepassword.

GenericService6008


Table 3-12 GenericService Event Processing Rules (continued)

AlertEnabled

EventEnabled


NYErrorFailed to change the usercontext of the service ‘%s’ to‘%s\\%s’. Error = %d.

GenericService6009

NYErrorFailed to set the virtualcomputer name in theenvironment of the service‘%s’. Error = %d.

GenericService6027

NYErrorFailed to start the service‘%s’. Error = %d.

GenericService6010

NYErrorThe service ‘%s’ did not startwithin the specified timelimit.

GenericService6011

NYErrorFailed to wait for the service‘%s’ to start. Error = %d.

GenericService6012

NYErrorFailed to get the user contextof the running service ‘%s’.Error = %d.

GenericService6013

NYErrorFailed to get the SID for user‘%s\\%s’.

GenericService6014

NYWarningThe service ‘%s’ is notrunning under the context ofuser ‘%s\\%s’.

GenericService6015

NYWarningThe ‘%s’ service is inSTARTED state but is notrunning under the context ofVirtual Server ‘%s’

GenericService6028

NYWarningFailed to remove the virtualname environment for theservice ‘%s’ Error : (%d:%d)

GenericService6029

NYWarningThe service ‘%s’ shares thesame process with otherservices. Killing it mightaffect those services.

GenericService6017


72

Table 3-12 GenericService Event Processing Rules (continued)

AlertEnabled

EventEnabled


NYErrorFailed to kill the process ofservice ‘%s’. Error = %d.

GenericService6018

NYErrorFailed to open the service‘%s’. Error %d.

GenericService6021

NYErrorFailed to query the status ofthe service ‘%s’. Error = %d.

GenericService6022

NYWarningThe service ‘%s’ is not inrunning state. Attempt tostop itmight be unsuccessful.

GenericService6023

NYErrorThe service ‘%s’ did not stop.Error = %d.

GenericService6024

NYWarningThe service ‘%s’ did not stopwithin the specified timeout.Error = %d.

GenericService6025

Microsoft Virtual Machine (MSVirtualMachine) agent event processingrules

Table 3-13 lists the MSVirtualMachine agent rules included in the VCSManagement Pack.

Table 3-13 Microsoft Virtual Machine Agent Event Processing Rules

AlertEnabled

EventEnabled


YErrorFailed to get Argument list.14001

YErrorVirtual Server COM interfacecould not be initialized.Reported Error : [%01X]

14002

YErrorGetVMQuery failed for VM%s.Reported Error : [%01X]

14003

YErrorCOM Object pointer is NULLeven after GetVM() Querysucceeded for VM %s.

14004


Table 3-13 Microsoft Virtual Machine Agent Event Processing Rules (continued)

AlertEnabled

EventEnabled


YErrorFailed to retrieve state for VM%s. Reported Error [%01X].

14005

YErrorInvalid VM state was reportedforVM%s.Reported state [%d].

14006

YErrorMonitorHB failed. Could notcreate instance for theGuestOSfor VM %s. Reported Error[%01X].

14007

YErrorMonitorHB failed. Could notcommunicate with Virtualmachine Additions for VM %s.Reported Error [%01X].

14008

YErrorVM %s has stoppedheartbeating.

14009

YErrorPower on for VM %s failed.Reported Error : [%01X]

14012

YWarningCould not get a handle for theGuest OS running in VM %s.

14014

YWarningOS Shutdown failed for VM%s.Reported Error : [%01X].

14013

YWarningFailed to poweroff the Virtualmachine %s. Reported Error :[%01X].

14010

YWarningVirtual machine %s is alreadystopped.

14011

PrintShare agent event processing rulesTable 3-14 lists thePrintShare agent rules included in theVCSManagementPack.


74

Table 3-14 PrintShare Agent Event Processing Rules

AlertEnabled

EventEnabled


NYErrorAttribute value(s) invalid for%s

PrintShare11001

NYErrorShare name %s containsinvalid characters

PrintShare11201

NYErrorInitializing printer%s on%sfailed. [%d:%d]

PrintShare11002

NYErrorPrinter mismatch for share%s

PrintShare11020

NYErrorPrintShareError :TheServerservice is not available

PrintShare11022

NYErrorThe share %s is of typeFolder

PrintShare11023

NYErrorThe share %s is of typeDevice

PrintShare11024

NYErrorThe share %s is of type IPCPrintShare11025

NYErrorThe share %s is of typeSpecial

PrintShare11026

NYErrorThe share %s is of typeUnknown

PrintShare11027

NYErrorUnknown error for printer(\\\\%s\\%s). [%d:%d]

PrintShare11006

NYErrorSystem error occurred forprinter %s Error [%d]

PrintShare11021

NYErrorFailed to get properties forprinter (\\\\%s\\%s).[%d:%d]

PrintShare11007

NYErrorFailed to open printer %s[%d:%d]

PrintShare11029

NYErrorPrinter %s (\\\\%s\\%s)already shared

PrintShare11008


Table 3-14 PrintShare Agent Event Processing Rules (continued)

AlertEnabled

EventEnabled


NYErrorFailed to share printer%s as(\\\\%s\\%s) [%d:%d]

PrintShare11009

NYErrorThe printer %s may not beshared by VCS

PrintShare11028

NYErrorFailed to unshare printer%sas (\\\\%s\\%s) [%d:%d]

PrintShare11019

PrintSpool agent event processing rulesTable 3-15 lists the PrintSpool agent rules included in theVCSManagement Pack.

Table 3-15 PrintSpool Agent Event Processing Rules

AlertEnabled

EventEnabled



PrintSpool7001

NYErrorLanmanResNameattributehas not been configured.

PrintSpool7002

NYErrorIPResName attribute hasnot been configured.

PrintSpool7003

NYErrorMountResName attributehas not been configured.

PrintSpool7004

NYErrorSpoolDirectory attributehas not been configured.

PrintSpool7005

NYErrorFailed to update thespooler registrykeys. Error= %d.

PrintSpool7006

NYErrorThe spooler path ‘%s’ isnot valid.

PrintSpool7007

NYErrorFailed to enumerate theprocesses in the system.Error = %d.

PrintSpool7008


76

Table 3-15 PrintSpool Agent Event Processing Rules (continued)

AlertEnabled

EventEnabled


NYErrorSpooler is not running.PrintSpool7009

NYErrorFailed to initialize thespooler. Error=%d.

PrintSpool7010

NYErrorDuplicate Lanman name(%s) provided. AnotherPrintSpool resource existswith this Lanman name.

PrintSpool7011

NYErrorDuplicate IP address (%s)provided. AnotherPrintSpool resource existswith this IP.

PrintSpool7012

NYErrorFailed to allocatememory.PrintSpool7013

NYErrorFailed to get internal datafor resource ‘%s’. Probablyopen entry point for thisresource has failed.

PrintSpool7014

NYWarningAttribute mismatch forLanman resource.Attribute change is notsupported.

PrintSpool7015

NYWarningAttribute mismatch for IPresource. Attribute changeis not supported.

PrintSpool7016

NYErrorFailed to open acommunication channel tothe helper process.Error=%d.

PrintSpool7017

NYErrorFailed to online the virtualspooler. Error=%d.

PrintSpool7018

NYErrorThehelper process for thisresource exitedautomatically.

PrintSpool7019


Table 3-15 PrintSpool Agent Event Processing Rules (continued)

AlertEnabled

EventEnabled


NYErrorThe communicationchannel to the helperprocess is invalid.

PrintSpool7020

NYErrorFailed to offline theresource. Error=%d.Killing the helper process.

PrintSpool7021

NYErrorFailed to terminate thehelper process. Error=%d.

PrintSpool7022

NYErrorFailed to create the helperprocess. Error=%d.

PrintSpool7024

NYWarningFailed to enumerate theprocesses in the system.Error=%d.

PrintSpool7025

NYErrorFailed to initialize thehelper process. Error=%d.

PrintSpool7026

NYErrorThe helper process is notready to acceptcommand=%d.Administrativeintervention may berequired.

PrintSpool7027

NYErrorFailed to send thecommand=%d to thehelper process. Error=%d.

PrintSpool7028

NYErrorThe communicationchannel with the helperprocess has timed out.

PrintSpool7029

NYErrorFailed to receive a replyfrom the helper process.Error=%d.

PrintSpool7030

Proxy agent event processing rulesTable 3-16 lists the Proxy agent rules included in the VCS Management Pack.


78

Table 3-16 Proxy Agent Event Processing Rules

AlertEnabled

EventEnabled


NYErrorTarget Resource Name is not avalid name

Agents2501

NYErrorUnable to get the computername

Agents2502

NYErrorUnable to determine the stateusing input values

Agents2503

NYErrorTarget resource is not ProbedAgents2504

NYErrorUnable to convert the resourceName. Error Code %d

Agents2505

NYErrorUnable to find VCS_HOME.Error Code %d

Agents2506

NYErrorUnable to identify the state ofthe resource. Error Code %d

Agents2507

NYErrorUnable to convert the buffer.Error Code %d

Agents2508

IP agent event processing rulesTable 3-17 lists the IP agent rules included in the VCS Management Pack.

Table 3-17 IP Agent Event Processing Rules

AlertEnabled

EventEnabled


NYErrorInvalid attributesAgents4003

NYErrorPing failed for IP (IP_Address).Agents4004

NYErrorHost (IP_Address) alreadyexists

Agents4005

NYErrorFailed to add IP (IP_Address).Agents4006

NYErrorInitialization failedAgents4001

NYErrorFailed to delete IP(IP_Address).

Agents4007


Table 3-17 IP Agent Event Processing Rules (continued)

AlertEnabled

EventEnabled


NYWarningIP (IP_Address) is Admin IPAgents4008

NYErrorInvalid MacAddress formatAgents4009

NYErrorInvalid MacAddress(MAC_Address) specified

Agents4017

NYWarningTCP/IP is not enabled foradapter (%s)

Agents4018

NYErrorInvalid IP formatAgents4010

NYErrorInternal errorAgents4011

NYErrorIncorrect IP (IP_Address)Agents4012

NYErrorIncorrect subnet mask(SubNet_Mask)

Agents4013

NYErrorAdapter (MAC_Adress) notfound

Agents4014

NYErrorDHCP is enabled on Adapter(%s)

Agents4015

NYErrorInvalid Adapter(MAC_Address)

Agents4016

NYErrorFailed toupdate the IP registrykeys. Error = %d.

Agents4019

IPMultiNicPlus agent event processing rulesTable 3-18 lists the IPMultiNicPlus agent rules included in the VCS ManagementPack.

Table 3-18 IPMultiPlus Agent Event Processing Rules

AlertEnabled

EventEnabled


NYErrorAdapterList is Invalid . Pleasecheck the configuration.

Agents4501

NYErrorInternal error.Error : %sAgents4502


80

Table 3-18 IPMultiPlus Agent Event Processing Rules (continued)

AlertEnabled

EventEnabled


NYErrorInternal error. Adapter: %sError: %d

Agents4503

NYErrorInternal error. ReturningUnknown state. Error: %d

Agents4504

NYErrorAdmin IP address notspecified. Check theconfiguration.

Agents4505

NYErrorIP address %s is not instandard ‘a.b.c.d’ form

Agents4506

NYErrorInvalid Admin IP address.Check the configuration.Admin IP: %s

Agents4507

NYErrorAdmin SubNetMask notspecified. Check theconfiguration.

Agents4508

NYErrorSubNetMask %s is not instandard ‘a.b.c.d’ form

Agents4509

NYErrorInvalid Admin SubNetMask.Check the configuration.Admin SubNetMask: %s

Agents4510

NYErrorAddIPAddress() failed for IP%S !!

Agents4511

NYErrorWaitForSingleObject() Failed!!

Agents4513

NYErrorWaitForMultipleObjects()Failed !!

Agents4514

NYWarningAdminIp configured used byan adapter which is notpresent in the configuration

Agents4515

NYWarningIp %s already exists on thenetwork

Agents4604



AlertEnabled

EventEnabled


NYErrorDeleteIPAddress() Failed forIP %s !!

Agents4512

NYErrorInvalid MAC address %sspecified in adapter List

Agents4516

NYErrorTCP/IP is not enabled forMACaddress %s specified inadapter List

Agents4530

NYErrorDHCP is enabled on Adapter(%s)

Agents4532

NYErrorInvalid Adapter (%s)Agents4533

NYErrorNo adapters specified in theAdapterList.

Agents4517

NYWarningInvalid IP format (%s)Agents4531

NYErrorPingHostList is EmptyAgents4518

NYErrorIP Address not specified.Check the configuration.

Agents4519

NYErrorInvalid IPAddress :%s . Checkthe configuration.

Agents4520

NYErrorSubNetMask not specified.Check the configuration.

Agents4521

NYErrorInvalid SubNetMask : %s .Check the configuration.

Agents4522

NYErrorInternal error. ReturningUnknownstate. Error:%d-%d

Agents4523

NYErrorInvalidMACaddress specifiedin the AdapterList. MACAddress: %s

Agents4524

NYError“VCS internal error, contactsupport. Returning Unknownstate. Adapter: %s Error:%d-%d”

Agents4525


82


AlertEnabled

EventEnabled


NYErrorInternal error. Error: %d-%dAgents4527

NYErrorInternal error. Adapter: %sError: %d-%d

Agents4526

NetLsnr agent event processing rulesTable 3-19 lists the NetLsnr agent rules included in the VCS Management Pack.

Table 3-19 NetLsnr Agent Event Processing Rules

AlertEnabled

EventEnabled


NYErrorCannot Open Service handlefor %s (Windows Error Code= %d)

Agents19

NYErrorCannot Start Service(Windows Error Code = %d)

Agents1

NYErrorCannot Start Service(Windows Error Code = %d)

Agents23

NYErrorCannot Stop ServiceAgents2

NYErrorCannotCloseServiceHandle(Windows Error Code = %d)

Agents11

NIC agent event processing rulesTable 3-20 lists the NIC agent rules included in the VCS Management Pack.

Table 3-20 NIC Agent Event Processing Rules

AlertEnabled

EventEnabled


NYWarningInvalid MacAddress(MAC_Address) specified

Agents3504

NYWarningInternal errorAgents3505


Table 3-20 NIC Agent Event Processing Rules (continued)

AlertEnabled

EventEnabled


NYWarningTCP/IP is not enabled foradapter (Adapter_Name)

Agents3515

NYErrorError percentage exceededfor (Adapter_Name)

Agents3506

NYErrorAdapter (Adapter_Name)Connection status cannotbe found.

Agents3507

NYErrorAdapter (Adapter_Name)is not connected

Agents3513

NYWarningPingHostList not specified.Agents3508

NYErrorUDP echo attempt failed.Agents3509

NYErrorUDP check failed due tonework error.

Agents3510

NYErrorFailed to create Mutex.Agents1234

NYErrorFailed to get IFEntry foradapter %s

Agents3514

NYErrorAdapter (Adapter_Name)not found

Agents3512

NYErrorError percentage exceededlimit

Agents3516

NotifierMngr agent event processing rulesTable 3-21 lists the NotifierMngr agent rules included in the VCS ManagementPack.

Table 3-21 NotifierMngr Agent Event Processing Rules

AlertEnabled

EventEnabled


NYErrorFailed to get Notifier commandline.

Agents5011


84

Table 3-21 NotifierMngr Agent Event Processing Rules (continued)

AlertEnabled

EventEnabled


NYErrorFailed to Start Notifier Process%s. (Windows Error Code = %d)

Agents5002

NYErrorFailed toOfflineNotifierProcess.PID = %u (Windows Error Code= %d)

Agents5004

NYErrorFailed to Clean Notifier Process.PID = %u (Windows Error Code= %d)

Agents5005

NYErrorFailed to Open Notifier Process.PID = %u (Windows Error Code= %d)

Agents5003

NYErrorPID mismatch in cache. PID =%u (Cached Object PID = %u)

Agents5012

NYErrorNotifierMngr:Unable to connectto (SMTP Server)

Agents5013

NYErrorNotifierMngr:Invalid emailaddress format of SMTPRecipient.

Agents5014

NYWarningExpected correct SNMP and | orSMTP options

Agents5008

NYErrorUnable to findVCS_HOME.ErrorCode %d

Agents5010

NYErrorFailed to enumerate theprocesses. Error = %d.

Agents6533

NYErrorFailed to allocate memory.Agents6534

NYErrorFailed to open the process(%d).Error = %d.

Agents6535

Registry Replication (RegRep) agent event processing rulesTable 3-22 lists the RegRep agent rules included in the VCS Management Pack.


Table 3-22 Registry Replication (RegRep) Agent Event Processing Rules

AlertEnabled

EventEnabled


NYError”Failed to restore the registry(key= Key_name

Agents5508

NYErrorRestore operation of Exclude Keyis not attempted as failed to locatethe backup file (Key=%s)

Agents5534

NYErrorConfigurationError :Mismatchedquotes in option %s

Agents5537

NYErrorConfiguration Error : Key‘Key_name’ is configured inReplication Key List as well as inExclude Key List

Agents5530

NYErrorConfiguration Error : Key‘Key_name’ configured inReplication Key List is a Sub Keyof key ‘%s’ configured in ExcludeKey List

Agents5531

NYErrorFailed to get computer name(Info=%s)

Agents5511

NYErrorCould not add privilege(privilege=%s)

Agents5505

NYErrorThe name of the local host isinvalid (hostname= host_name)

Agents5506

NYErrorDirectory does not exist (or) couldnot create (directory=Drivename:path)

Agents5503

NYWarning”Windows Error Code %dencountered while accessing key\%s\””.”””

Agents5538

NYErrorFailed to delete the Exclude Key(Key=%s)

Agents5535

NYErrorExclude Key is newly created andcould not be deleted (Key=%s)

Agents5536

NYWarningFailed to bring resource onlineAgents5529


86

Table 3-22 Registry Replication (RegRep) Agent Event Processing Rules(continued)

AlertEnabled

EventEnabled


NYErrorFailed to get replication pathAgents5518

NYErrorCould not talk tomonitor process(Info=%d)

Agents5513

NYWarningCould not locate the file(file=file_name)

Agents5520

NYWarningInitialization failed.(reason)Agents5706

NYWarningFailed to set %SAgents5524

NYErrorDelete and restore not attemptedas backup file can’t be created(Key=%s)

Agents5521

NYErrorProcessnot responding (Info=%s)Agents5514

NYWarningShared memory still exists evenafter the process exited (Info=%s)

Agents5515

NYErrorFailed to communicate monitorregistry keys toRegRepMonitor.exe

Agents5517

NYError”Failed to communicatereplication path toRegRepMonitor.exe (Drive=%s

Agents5516

NYErrorFailed to backup Exclude Key(Key=%s)

Agents5533

NYErrorBackup of Exclude Key is notattempted as backup file can’t becreated (Key=%s)

Agents5532

Lanman agent event processing rulesTable 3-23 lists the Lanman agent rules included in the VCS Management Pack.


Table 3-23 Lanman Agent Event Processing Rules

AlertEnabled

EventEnabled


NYError”Internal error (Failed toinitialize COM

Agents3001

NYError”Internal error (Failed toinitialize virtualname object

Agents3002

NYWarning”Internal error (Failed tovalidate virtual server name

Agents3003

NYErrorVirtual server name specifiedin the configuration is invalid(%s)

Agents3004

NYErrorVirtual name already exist inthe network

Agents3005

NYError”Failed to register Virtualserver name to Netbios(error_type:%d

Agents3008

NYError”Internal error (Failed todetach computer account

Agents3010

NYError”Failed to start the ‘VeritasClusterServerHelper’ service.(error_type:%d

Agents3011

NYError”Internal error (Failed toswitch the security context

Agents3012

NYErrorIP address specified forMultiNetInfo is invalid(entry=%S)

Agents3017

NYErrorSubnetMask specified forMultiNetInfo is invalid(entry=%S)

Agents3018

NYErrorWINS address specified forMultinetInfo is invalid(entry=%S)

Agents3019

NYErrorInternal error (invalidargument list)

Agents3020


88

Table 3-23 Lanman Agent Event Processing Rules (continued)

AlertEnabled

EventEnabled


NYErrorVirtualName attribute is notspecified in the configuration

Agents3021

NYErrorIP address specified in theconfiguration is invalid

Agents3022

NYErrorSubnetMask specified in theconfiguration is invalid

Agents3023

NYErrorMultinetInfo attributespecified in the configurationis in invalid format

Agents3024

NYErrorThere are no valid IPaddresses specified in theconfiguration

Agents3025

NYWarningInvalid option specified fortheDNSOptionsattribute (%s)

Agents3009

NYErrorIP address specified in theconfiguration is not online.(ip=%S)

Agents3026

NYErrorMismatch in the subnetmaskspecified in configuration andthe actual subnet maskconfigured for the adapter

Agents3027

NYWarningWINSaddress specified in theconfiguration is not found inthe adapter’s WINS addresslist

Agents3028

NYError”Failed to update DNS entry(error_type:%d

Agents3006

NYError”Failed to update Computeraccount in Active directory(error_type:%d

Agents3007

NYError”Internal error (Failedinitialize netbios tableinformation

Agents3029


Table 3-23 Lanman Agent Event Processing Rules (continued)

AlertEnabled

EventEnabled


NYError”Attempt to online theLanman resource has failed.error_type:%d

Agents3032

NYErrorInvalid attributes exist in theconfiguration

Agents3033

NYError”Attempt to offline theLanman resource has failed.(error_type:%d

Agents3034

NYError”Attempt to clean theLanmanresource has failed.(error_type:%d

Agents3036

VvrRvg agent event processing rulesTable 3-24 lists the VvrRvg agent rules included in the VCS Management Pack.

Table 3-24 VvrRvg Agent Event Processing Rules

AlertEnabled

EventEnabled


NYErrorFailed to allocate resourceinstance memory

VvrRvg1

NYWarningFailed to find resourceinstance

VvrRvg2

NYErrorFailed toopenRVG.Error code:%S

VvrRvg3

YYErrorOne or more attributes areincorrectly configured

VvrRvg4

NYErrorRVG is in a FAIL state.Resource cannot be Onlined

VvrRvg5

YYErrorOnline failed. Error code: %SVvrRvg6

YYErrorRVG is in an invalid state.Resource cannot be Onlined

VvrRvg7


90

Table 3-24 VvrRvg Agent Event Processing Rules (continued)

AlertEnabled

EventEnabled


YYErrorMonitor failed. Error code:%SVvrRvg8

YYErrorOffline failed. Error code: %SVvrRvg9

YYErrorClean failed. Error code: %SVvrRvg10

NYErrorClose failed. Error code: %SVvrRvg11

NYWarningFailed to detect the configuredRVG

VvrRvg12

YYErrorInvalid value specified forattribute: %S

VvrRvg13

NYErrorOperation timed outVvrRvg14

NYErrorAsynchronous operationfailed. Error: %S

VvrRvg15

NYErrorFailed to get the name of thelocal computer. Error code:%S

VvrRvg16

NYErrorCouldn’t find the IP ResourceVvrRvg17

NYErrorFailed to create the monitorprocess for the IP Resource.Error code: %S

VvrRvg18

NYError”Received an unknown statefor the IP Resource

VvrRvg19

NYErrorThe target host is notresponding

VvrRvg20

RVGPrimary agent event processing rulesTable 3-25 lists the RVGPrimary agent rules included in the VCS ManagementPack.


Table 3-25 RVGPrimary Agent Event Processing Rules

AlertEnabled

EventEnabled


YYErrorRVGattribute not assigned forresource %2$s; please checkthe assignment ofRvgResource name attributefor this resource or RVGattribute for %3$s

HAD1

YYErrorDiskGroupName attribute notassigned for resource %2$s;please check the assignmentof VMDgResource nameattribute for %3$s orDiskGroupName attribute for%4$s

HAD2

YYErrorNo RLinks found for RVG%2$s; please setup RLinks forRVG %3$s

HAD3

NNErrorLockfile (%2$s) was notsuccessfully removed

HAD5

YNErrorRLink %2$s is inconsistent;please restore %3$s from aconsistent snapshot or backupand promote it to primary,clear its service group, andonline group again

HAD7

NNErrorRLink %2$s is up to date butinsufficient time to completetakeover; if group does not goonline clear fault and onlineagain

HAD10

YYErrormigrate of %2$s failed witherror code %3$s and message%4$s

HAD11

YYErrortakeover of %2$s failed witherror code %3$s and message%4$s

HAD13


92

Table 3-25 RVGPrimary Agent Event Processing Rules (continued)

AlertEnabled

EventEnabled


NNWarningRLink %2$s is not connected;use 'vxrvg -g %3$s -Fmakeprimary%4$s' commandto takeover

HAD17

YYErrorRVG %2$s isacting_secondary. Pleaseresync from primary

HAD18

YYErrorVMDgResName attribute notassigned for resource %2$s;please check the assignmentofRvgResourcenameattributefor this resource orVMDgResName attribute for%3$

HAD20

NNErrorFailed toaddother secondariesin the RDS

HAD21

YYErrorSynchronization of secondary%2$s failed with error code%3$s and message %4$s

HAD23

NNErrorCheckend operation on RVG%2$s failed with error code%3$s and message %4$s

HAD24

NNErrorAttaching secondary %2$sfailed with error code %3$sand message %4$s

HAD25

NNErrorCheckstart of RVG %2$s withcheckpoint %3$s failed witherror code %4$s and message%5$s

HAD26

NNErrorRemote execution onsecondary %2$s failed witherror code %3$s and message%4$s

HAD27

NNErrorResynchronization can bestarted only from the primary

HAD30



AlertEnabled

EventEnabled


NNErrorResynchronization from RVG%2$s failed with error code%3$s

HAD31

NErrorvxprint failed with error code%2$s and message %3$s

HAD32

YErrorInsufficient time to completemigrate operation for RVG%2$s. If group does not goonline clear fault and onlineagain

HAD33

NErrorFailed to determine the role ofRVG %2$s. The value of rolefound %3$s

HAD35

NErrorThe checkpoint%2$s takenbyRVGPrimaryresourcedoesnotmatch with the currentcheckpoint %3$s on RVG%4$s

HAD38

NErrorAttaching secondary %2$swith checkpoint %3$s failedwith error code %4$s andmessage %5$s

HAD39

NErrorRVG%2$s is not checkstartedHAD40

NNErrorTheActivate bunker operationfailed forRVG%2$sonbunkerhost %3$s and disk group%4$s with error code %5$sand message %6$s

HAD42

NNErrorThe startrep operation failedfor RVG %2$s with error code%3$s and message %4$s

HAD43

NNErrorThe attach operation failed forrlink %2$s

HAD45

NNErrorBunker sync timed outHAD48


94


AlertEnabled

EventEnabled


NNErrorDuring rollback, the %2$scommand failed with errorcode %3$s and message %4$s

HAD49

NErrorDiskgroup %2$s could not beimported on primary host.Operation failed with error%3$s and message %4$s

HAD61

NErrorDiskgroup %2$s could not beimported on bunker host%3$s. Operation failed witherror%4$s andmessage%5$s

HAD64

Enterprise application agents

MSDTC event processing rulesTable 3-26 lists the MSDTC agent rules included in the VCS Management Pack.

Table 3-26 MSDTC Event Processing Rules

AlertEnabled

EventEnabled



Agents1

NYErrorLanman attribute has notbeen configured.

Agents2

NYErrorMountResName attribute hasnot been configured.

Agents3

NYErrorLogPath attribute has notbeen configured.

Agents4

NYErrorLogPath attribute has invalidcharacters.

Agents5

95VCS Management Pack monitoring rulesEnterprise application agents

Table 3-26 MSDTC Event Processing Rules (continued)

AlertEnabled

EventEnabled


NYError“Not the owner of MSDTCservice. MSDTC is currentlyowned by VCS resource, %s”

Agents36

NYError“MSDTC service is not ownedby the resource, %s”

Agents37

NYErrorFailed to open the registry key‘%s’. Error = %d.

Agents14

NYErrorFailed to set the key ‘%s’.Error = %d.

Agents15

NYErrorFailed to open the SCMhandle. Error = %d.

Agents11

NYErrorFailed to open the MsDtcservice. Error = %d.

Agents12

NYErrorFailed to enable the networkaccess for MSDTC. Error =%d.

Agents29

NYErrorFailed to set the environmentkey of MSDTC service. Error= %d.

Agents13

NYErrorCould not reset themsdtc log.Error = %d.

Agents16

NYWarningThe log file does not exist. Logfile = ‘%s’.

Agents18

NYErrorFailed to start the MSDTCservice. Error = %d.

Agents19

NYErrorFailed to wait for the MSDTCservice to start. Error = %d.

Agents20

NYErrorFailed to get the status of theMSDTC service. Error = %d.

Agents21

NYErrorFailed to set the logpath key‘%s’. Error = %d.

Agents23

VCS Management Pack monitoring rulesEnterprise application agents

96

Table 3-26 MSDTC Event Processing Rules (continued)

AlertEnabled

EventEnabled


NYWarningThe MSDTC log path is ‘%s’.Configured one is ‘%s’.

Agents24

NYErrorFailed to kill the MSDTCservice. Error = %d.

Agents25

NYErrorFailed to query the MSDTCservice status. Error = %d.

Agents26

NYWarningThe MSDTC service is not inrunning state. Offline mightbe unsuccessful.

Agents27

NYErrorFailed to stop the MSDTCservice. Error = %d.

Agents28

NYErrorFailed to wait for the MSDTCservice to stop. Error = %d.

Agents30

NYErrorFailed to open theMSDTCCIDkey. Error = %d.

Agents40

NYWarningFailed to enumerate keys.Error = %d.

Agents41

NYWarningFailed to open the subkey‘%s’. Error = %d.

Agents42

NYWarningFailed to query the value thesubkey ‘%s’. Error = %d.

Agents43

MSSearch event processing rulesTable 3-27 lists theMSSearch agent rules included in the VCSManagement Pack.

Table 3-27 MSSearch Event Processing Rules

AlertEnabled

EventEnabled


NYErrorFailed to get the attributes. Error= %d.

Agents1


Table 3-27 MSSearch Event Processing Rules (continued)

AlertEnabled

EventEnabled


NYErrorThe AppName attribute has notbeen configured.

Agents2

NYErrorThe AppPath attribute has notbeen configured.

Agents3

NYErrorFailed to get the MicrosoftSearch service instance for ‘%s’.Error = %8X.

Agents23

NYErrorFailed to instantiate theMicrosoft Search COM object.Error = %8X.

Agents11

NYErrorFailed to open the MicrosoftSearch service. Error = %d.

Agents12

NYWarningFailed to determine the state ofMicrosoft Search service. Error= %d.

Agents13

NYErrorThe AppName attribute has notbeen configured correctly.

Agents24

NYErrorFailed to open the registry key‘%s’. Error = %d.

Agents14

NYErrorFailed to set the registry forapplication = ‘%s’. Error = %d.

Agents15

NYErrorFailed to create theCoMsssBridge object. Error =%8X.

Agents20

NYErrorFailed to open the MicrosoftSearch instance for ‘%s’. Error =%8X.

Agents16

NYErrorFailed to online the MicrosoftSearch instance for ‘%s’. Error =%8X.

Agents17

NYErrorFailed to offline the MicrosoftSearch instance for ‘%s’. Error =%8X.

Agents18


98

Table 3-27 MSSearch Event Processing Rules (continued)

AlertEnabled

EventEnabled


NYErrorFailed to close the MicrosoftSearch instance for ‘%s’. Error =%8X.

Agents19

NYErrorFailed to terminate theMicrosoftSearch service. Error = %d.

Agents21

NYErrorFailed to enable the debugprivilege. Error = %d.

Agents22

SQL Server 2012 Agent event processing rulesTable 3-28 lists the SQLServer 2012Agent rules included in theVCSManagementPack.

Table 3-28 SQL Server 2012 Agent Event Processing Rules

AlertEnabled

EventEnabled


YYError"%s:The '%s' service is in STARTEDstate but is not running under thecontext of Virtual Server '%s'"

Agents11

YYError"%s:Sql script has failed with error%s"

Agents23

NYError"%s:Failed to initialize theSQLServer2012 agent."

Agents3

NYError"%s:Failed to set the virtualcomputername in the environmentof the service '%s'. Error = %s."

Agents7

NYError"%s:Failed to stop the dependentservices of the service '%s'. Error =%s."

Agents16

NYError"%s:Failed to start the Sql script.(User = %s, Domain = %s) Error :%s"

Agents20

NYError"%s:Failed to open the MSDTCservice. Error = %s."

Agents34


SQL Server 2008 Agent event processing rulesTable 3-29 lists the SQLServer 2008Agent rules included in theVCSManagementPack.

Table 3-29 SQL Server 2008 Agent Event Processing Rules

AlertEnabled

EventEnabled


YYError"%s:The '%s' service is in STARTEDstate but is not running under thecontext of Virtual Server '%s'"

Agents11

YYError"%s:Sql script has failed with error%s"

Agents23

NYError"%s:Failed to initialize theSQLServer2008 agent."

Agents3

NYError"%s:Failed to set the virtualcomputername in the environmentof the service '%s'. Error = %s."

Agents7

NYError"%s:Failed to stop the dependentservices of the service '%s'. Error =%s."

Agents16

NYError"%s:Failed to start the Sql script.(User = %s, Domain = %s) Error :%s"

Agents20

NYError"%s:Failed to open the MSDTCservice. Error = %s."

Agents34

SQL Server 2005 Agent Service event processing rulesTable 3-30 lists the SQL Server Agent Service agent rules included in the VCSManagement Pack.

Table 3-30 SQL Server 2005 Agent Service Event Processing Rules

AlertEnabled

EventEnabled


NYErrorFailed to convert the argumentlist. Error = %d.

Agents1


100

Table 3-30 SQL Server 2005 Agent Service Event Processing Rules (continued)

AlertEnabled

EventEnabled


NYErrorInvalid Arglist entry at position%d for <attribute name>.

Agents99


Agents8

NYErrorFailed to set the virtualcomputer name in theenvironment of the service ‘%s’.Error = %d.

Agents11

NYErrorFailed to start the service ‘%s’.Error = %d.

Agents9

NYErrorThe service ‘%s’ did not startwithin the specified time limit.

Agents12


Agents13

NYWarningThe ‘%s’ service is not instopped or running state.State=%d.

Agents14

NYWarningThe ‘%s’ service is in STARTEDstate but is not running underthe context of Virtual Server‘%s’

Agents16


Agents38

NYErrorFailed to open the service ‘%s’.Error %d.

Agents20

NYErrorFailed to query the status of theservice ‘%s’. Error = %d.

Agents21

NYWarningThe service ‘%s’ is not inrunning state. Attempt to stopit might be unsuccessful.

Agents22


Agents23


Table 3-30 SQL Server 2005 Agent Service Event Processing Rules (continued)

AlertEnabled

EventEnabled



Agents24

NoYes-SQL Server 2005 ServiceAvailability in VCS

--

NoYes-SQL Server 2005 Block Analysisin VCS

--

NoYes-SQL Server 2005 DatabaseHealth in VCS

--

NoYes-SQL Server 2005 Long RunningAgent Jobs in VCS

--

NoYes-SQL Server 2005 ReplicationMonitoring in VCS

--

NoYes-SQL Server 2005 ServiceDiscovery in VCS

--

NoYes-SQLServer 2005SpaceAnalysisin VCS

--

SQL Server 2005 OLAP Service event processing rulesTable 3-31 lists the SQL Server OLAP Service agent rules included in the VCSManagement Pack.

Table 3-31 SQL Server 2005 OLAP Service Event Processing Rules

AlertEnabled

EventEnabled



Agents1

NYErrorInvalidArglist entry at position%d for <attribute name>.

Agents99


Agents8


102

Table 3-31 SQL Server 2005 OLAP Service Event Processing Rules (continued)

AlertEnabled

EventEnabled


NYErrorFailed to set the virtualcomputer name in theenvironmentof the service ‘%s’.Error = %d.

Agents11

NYErrorFailed to start the service ‘%s’.Error = %d.

Agents9

NYErrorThe service ‘%s’ did not startwithin the specified time limit.

Agents12


Agents13


Agents14

NYWarningThe ‘%s’ service is in STARTEDstate but is not running underthe context of Virtual Server‘%s’

Agents16


Agents38

NYErrorFailed to open the service ‘%s’.Error %d.

Agents20


Agents21

NYWarningThe service ‘%s’ is not inrunning state. Attempt to stopit might be unsuccessful.

Agents22


Agents23


Agents24


SQL Server 2005 event processing rulesTable 3-32 lists the SQLServer 2005 agent rules included in theVCSManagementPack.

Table 3-32 SQL Server 2005 Event Processing Rules

AlertEnabled

EventEnabled



Agents8

NYErrorFailed to set the virtualcomputer name in theenvironment of the service‘%s’. Error = %d.

Agents11

NYErrorFailed to start the service‘%s’. Error = %d

Agents9

NYErrorThe service ‘%s’ did not startwithin the specified timelimit.

Agents12


Agents13


Agents14

NYWarningThe ‘%s’ service is inSTARTED state but is notrunning under the context ofVirtual Server ‘%s’

Agents16


Agents38

NYErrorFailed to open the service‘%s’. Error %d.

Agents20

NYErrorFailed to query the status ofthe service ‘%s’. Error = %d.

Agents21

NYWarningThe service ‘%s’ is not inrunning state. Attempt tostop itmight beunsuccessful.

Agents22


104

Table 3-32 SQL Server 2005 Event Processing Rules (continued)

AlertEnabled

EventEnabled



Agents23


Agents24

NYErrorFailed to get the temporaryfile path. Error : %d

Agents34

NYError“Failed to start the Sql script.(User = %s, Domain = %s)Error : %d”

Agents31

NYErrorFailed to create thetemporary file. error %d

Agents35

NYErrorUnable to convert the bufferto UNICODE. Error Code %d

Agents32

NYErrorSql script has failed witherror %d

Agents25

NYErrorSql script failed. Scriptoutput :

Agents33

NYError%sAgents36

NYErrorFailed read the temporaryfile. Error : %d

Agents37

NYErrorError occurred while gettingthe process exit code. error :%d

Agents26

NYErrorWaitForSingleObject failedwith error %d

Agents27


Agents1

NYErrorThe password attribute hasnot been configured.

Agents30


Table 3-32 SQL Server 2005 Event Processing Rules (continued)

AlertEnabled

EventEnabled


NYErrorFailed to convert thepassword attribute. Error =%d.

Agents17

Service Monitor event processing rulesTable 3-33 lists the ServiceMonitor agent rules included in the VCSManagementPack.

Table 3-33 Service Monitor Event Processing Rules

AlertEnabled

EventEnabled



ServiceMonitor7501

NYErrorThe ServiceOrScriptNameattribute has not beenconfigured.

ServiceMonitor7502

NYErrorFailed to lookup the accountname ‘%s’. Error = %d.

ServiceMonitor7503

NYErrorThepassword attribute hasnotbeen configured.

ServiceMonitor7504

NYErrorFailed to open the service ‘%s’.Error = %d.

ServiceMonitor7506


ServiceMonitor7507

NYWarningThe service ‘%s’ is not inrunning state.

ServiceMonitor7508

NYErrorFailed to get the user contextof the running service ‘%s’.Error = %d.

ServiceMonitor7509

NYErrorFailed to get the SID for user‘%s\\%s’.

ServiceMonitor7510


106

Table 3-33 Service Monitor Event Processing Rules (continued)

AlertEnabled

EventEnabled


NYWarningThe service ‘%s’ is not runningunder the context of user‘%s\\%s’.

ServiceMonitor7511

NYErrorFailed to get the password.ServiceMonitor7513

NYErrorFailed to launch the monitorscript ‘%s’. Error = %d.

ServiceMonitor7514

NYWarningMonitor script has notrespondedwithin the specifiedtimeout of %d seconds. Error= %d.

ServiceMonitor7515

NYWarningFailed to terminate themonitorprogram. Error = %d.

ServiceMonitor7516

NYWarningFailed to get exit code of themonitor program. Error = %d.

ServiceMonitor7517

Oracle Agent event processing rulesTable 3-34 lists the Oracle Agent agent rules included in the VCS ManagementPack.

Table 3-34 Oracle Agent Event Processing Rules

AlertEnabled

EventEnabled


NYErrorCannot Open Servicehandle for %s (WindowsError Code = %d)

Agents19

NYErrorCannot StopParent Service%s

Agents26

NYError“Failed todecrypt password, error code:%d”

Agents2

NYErrorWait for mutex failed.(WindowsError Code=%d)

Agents20


Table 3-34 Oracle Agent Event Processing Rules (continued)

AlertEnabled

EventEnabled


NYErrorWait for mutex abandoned(WindowsError Code=%d)

Agents21

NYErrorCannot wait for mutexobject (WindowsErrorCode= %d)

Agents22

NYErrorAn Oracle error occurred.Error :\n %s

Agents6

NYErrorSQL*Plus process exitedwith error %d

Agents7

NYErrorInvalid filename inargument list :%s (WindowsError Code = %d)

Agents8

NYErrorCannot Start Service(WindowsError Code=%d)

Agents23

NYErrorCannot Stop ServiceAgents11

NYErrorCannot wait for StopService

Agents34

NYError“Failed to stop the parentservice(s) with error code,%s”

Agents33

NYErrorFailed to Get VCS_HOMEAgents32

NetAppFiler agent event processing rulesTable 3-35 lists the NetAppFiler agent rules included in the VCS ManagementPack. This is in case of VCS for NetApp SnapMirror only.

Table 3-35 NetAppFiler Agent Event Processing Rules

AlertEnabled

EventEnabled


NYErrorUnable to get thearguments

Agents40


108

Table 3-35 NetAppFiler Agent Event Processing Rules (continued)

AlertEnabled

EventEnabled


NYErrorFilerName attribute is notspecified

Agents73

NYErrorStorageIP attribute is notspecified

Agents43

NYError”Failed to start the ‘VeritasCluster Server Helper’service. (error_type:%d

Agents101


Agents102

NYErrorFailed to open connectionto filer %s

Agents59

NYErrorFailed to convert string %sto IP address

Agents97

NYError”Internal error (Ping failedAgents98

NetAppSnapDrive agent event processing rulesTable 3-36 lists theNetAppSnapDrive agent rules included in theVCSManagementPack. This is in case of VCS for NetApp SnapMirror only.

Table 3-36 NetAppSnapDrive Agent Event Processing Rules

AlertEnabled

EventEnabled


NYErrorInvalid attributes exist inthe configuration

Agents105

NYError”Failed to start the ‘VeritasCluster Server Helper’service. (error_type:%d

Agents101


Agents102


NetAppSnapMirror agent event processing rulesTable 3-37 lists the NetAppSnapMirror agent rules included in the VCSManagement Pack. This is in case of VCS for NetApp SnapMirror only.

Table 3-37 NetAppSnapMirror Agent Event Processing Rules

AlertEnabled

EventEnabled


NErrorInvalid attributes exist inthe configuration

Agents105

NNError”Failed to start the ‘VeritasCluster Server Helper’service. (error_type:%d

Agents101

NError”Internal error (Failed toswitch the security context

Agents102

Agent Framework monitoring rulesTable 3-38 lists the Agent Framework rules included in the VCS ManagementPack.

Table 3-38 Agent Framework Monitoring Rules

AlertEnabled

EventEnabled


NNErrorResource(%s): Output of thecompleted operation (%s)\n%s

AgentFramework

13001

NNErrorOutput of the completedoperation (%s) \n%s

AgentFramework

13002

NNErrorResource(%s): Output of thetimed out operation (%s)\n%s

AgentFramework

13003

NNErrorOutput of the timed outoperation (%s) \n%s

AgentFramework

13004

NNErrorAgent(%s) is exiting due tointernal error.

AgentFramework

13005

VCS Management Pack monitoring rulesAgent Framework monitoring rules

110

Table 3-38 Agent Framework Monitoring Rules (continued)

AlertEnabled

EventEnabled


NNErrorResource(%s): cleanprocedure did not completewithin the expected time.

AgentFramework

13006

NNErrorResource(%s): closeprocedure did not completewithin the expected time.

AgentFramework

13007

NNErrorAgent rejected the offlinecommand for resource(%s)because the resource is notEnabled.

AgentFramework

13008

NNErrorAgent rejected the onlinecommand for resource(%s)because the resource is notEnabled.

AgentFramework

13009

NNErrorAgent rejected the probecommand for resource(%s)because the resource is notEnabled.

AgentFramework

13010

NNErrorResource(%s): offlineprocedure did not completewithin the expected time.

AgentFramework

13011

NNErrorResource(%s): onlineprocedure did not completewithin the expected time.

AgentFramework

13012

NNErrorResource(%s): openprocedure did not completewithin the expected time.

AgentFramework

13014

NNErrorResource(%s) faulted andthe attempt to automaticallyrestart it was not effective.Administrative interventionmay be required.

AgentFramework

13015

NNErrorAgent(%s) is exiting becausethe requiredargumentswerenot specified.

AgentFramework

13019

111VCS Management Pack monitoring rulesAgent Framework monitoring rules


AlertEnabled

EventEnabled


NNErrorAgent(%s) is exiting becauseit was given too manyarguments

AgentFramework

13020

NNErrorAgent(%s) is exiting becauseit was given unexpectedoption(%s)

AgentFramework

13021

NNErrorAgent(%s) is exiting becauseof invalid usage.

AgentFramework

13022

NNErrorResource(%s) - monitorprocedure finishedsuccessfully after failing tocomplete within theexpected time for (%s)consecutive times.

AgentFramework

13026

NNErrorResource(%s) - monitorprocedure did not completewithin the expected time.

AgentFramework

13027

NNErrorResource(%s) - the last (%s)invocations of the monitorprocedure did not completewithin the expected time.

AgentFramework

13028

NNErrorAttr_changed entry point ofresource(%s) requested thatthe timeout be extended by(%s) seconds

AgentFramework

13030

NNErrorClean entry point ofresource(%s) requested thatthe timeout be extended by(%s) seconds

AgentFramework

13031

NNErrorClose entry point ofresource(%s) requested thatthe timeout be extended by(%s) seconds

AgentFramework

13032


112


AlertEnabled

EventEnabled


NNErrorMonitor entry point ofresource(%s) requested thatthe timeout be extended by(%s) seconds

AgentFramework

13033

NNErrorOffline entry point ofresource(%s) requested thatthe timeout be extended by(%s) seconds

AgentFramework

13034

NNErrorOnline entry point ofresource(%s) requested thatthe timeout be extended by(%s) seconds

AgentFramework

13035

NNErrorOpen entry point ofresource(%s) requested thatthe timeout be extended by(%s) seconds

AgentFramework

13036

NNErrorAgent(%s): Monitor scriptfile (%s) not found.

AgentFramework

13037

NNErrorResource(%s): Errorexecuting the program(%s).

AgentFramework

13038

NNErrorResource(%s): Program(%s)was abnormally terminatedwith the exit code(%s).

AgentFramework

13039

NNErrorAgent(%s) is exiting becauseit encountered error(%s)when opening the lockfile(%s)

AgentFramework

13042

NNErrorAgent(%s) is exiting becauseit encountered error(%s)when locking file(%s)

AgentFramework

13043

NNErrorAgent(%s) is exiting becauseit encountered error(%s)when seeking to thebeginning of the lockfile(%s)

AgentFramework

13044



AlertEnabled

EventEnabled


NNErrorAgent(%s) is exiting becauseit encountered error(%s)when writing to the lockfile(%s).

AgentFramework

13045

NNErrorAgent(%s) is exiting becauseof incomplete write (%s) of(%s) to the lock file(%s).

AgentFramework

13046

NNErrorAgent(%s) is exiting becauseit encountered error(%s)when releasing lock onfile(%s).

AgentFramework

13047

NNErrorAgent(%s) is exiting becauseit could not lock the file(%s)

AgentFramework

13050

NNErrorAgent(%s) is exiting becauseanother agent withprocess-id(%s) is alreadyrunning for this type

AgentFramework

13051

NNErrorAgent(%s) is exiting becauseit could not load the agentlibrary(%s).

AgentFramework

13061

NNErrorAgent(%s) is exiting becauseit could not findVCSAgStartup() in the agentlibrary (%s).

AgentFramework

13062

NNErrorAgent is calling clean forresource(%s) because offlinedid not complete within theexpected time.

AgentFramework

13063

NNErrorAgent is calling clean forresource(%s) because theresource is up even afteroffline completed.

AgentFramework

13064


114


AlertEnabled

EventEnabled


NNErrorAgent is calling clean forresource(%s) because onlinedid not complete within theexpected time.

AgentFramework

13065

NNErrorAgent is calling clean forresource(%s) because theresource is not up even afteronline completed.

AgentFramework

13066

NNError”Agent is calling clean forresource(%s) because theresource became OFFLINEunexpectedly

AgentFramework

13067

NNErrorResource(%s) - cleancompleted successfully.

AgentFramework

13068

NNErrorResource(%s) - clean failed.AgentFramework

13069

NNErrorResource(%s) - clean notimplemented.

AgentFramework

13070

NNErrorResource(%s): reachedOnlineRetryLimit(%s).

AgentFramework

13071

NNErrorResource(%s): Agent isretrying online (attemptnumber %s of %s).

AgentFramework

13072

NNErrorResource(%s) becameOFFLINE unexpectedly onits own. Agent is restarting(attempt number %s of %s)the resource.

AgentFramework

13073



AlertEnabled

EventEnabled


NNErrorThemonitoring program forresource(%s) hasconsistently failed todetermine the resourcestatus within the expectedtime. Agent is restarting(attempt number %s of %s)the resource.

AgentFramework

13074

NNError”Resource(%s) has reportedunexpected OFFLINE %stimes

AgentFramework

13075

NNErrorAgent has successfullyrestarted resource(%s).

AgentFramework

13076

NNErrorAgent is unable to offlineresource(%s).Administrative interventionmay be required.

AgentFramework

13077

NNErrorResource(%s) - cleancompleted successfully after%s failed attempts.

AgentFramework

13078

NNErrorResource(%s): The last %dinvocations of the cleanprocedure have failed.

AgentFramework

13079

NNErrorAgent is calling clean forresource(%s) becausemonitor did not completewithin the expected time.

AgentFramework

13080

NNErrorAgent(%s) is exiting becauseit encountered error(%s)when truncating the lockfile(%s).

AgentFramework

13081

NNError”Resource(%s) recoveredfrom fault

AgentFramework

13082


116


AlertEnabled

EventEnabled


NNErrorTerminating the old agentfor the type(%s) withprocess-id(%s)

AgentFramework

13085

NNErrorAgent(%s) detected that apreviously started agentwith process-id(%s) for thistype is shutting down. Willterminate the old agent in(%s) seconds.

AgentFramework

13086

NNErrorAgent(%s) is exiting becauseit encountered error(%s)when reading from the lockfile(%s).

AgentFramework

13087

NNError”Agent couldnot redirect thestdin of (%s) to /dev/null

AgentFramework

13088

NNError”Agent couldnot redirect thestdout of (%s) to log file

AgentFramework

13089

NNError”Agent couldnot redirect thestderr of (%s) to log file

AgentFramework

13090

NNError”Agent(%s) could not openfile(%s) for locking

AgentFramework

13091

NNError”Agent(%s) could not obtainread lock on file (%s)

AgentFramework

13092

NNError”Agent(%s) could not obtainwrite lock on file (%s)

AgentFramework

13093

NNErrorAgent(%s) attempted tounlock file(%s) that is notlocked

AgentFramework

13094

NNErrorResource(%s) -Event(monitor) unexpectedin Detached state

AgentFramework

13095

NNErrorResource(%s) received anattr_changedcommandwithbad args

AgentFramework

13096



AlertEnabled

EventEnabled


NNErrorEntry point attr_changedtimed out for resource(%s)

AgentFramework

13097

NNErrorResource(%s): Op(%s)timeout unexpected in (%s)state

AgentFramework

13098

NNErrorResource(%s): Op(%s)done_waiting unexpected in(%s) state.

AgentFramework

13099

NNErrorResource(%s): Attribute(%s)depends on this resourceitself.

AgentFramework

13100

NNErrorResource(%s) received amodify command with badarguments

AgentFramework

13101

NNErrorResource (%s) receivedunexpectedevent%s in state%s

AgentFramework

13102

NNErrorUnknown/Invalid minorcode (%s)

AgentFramework

13103

NNErrorAgent(%s) receivedattributecommand (%s) without typename

AgentFramework

13104

NNErrorAgent(%s) receivedattributecommand(%s) for type(%s)without attr name

AgentFramework

13105

NNErrorCannot add static attribute(%s) to unknown type name(%s)

AgentFramework

13106

NNErrorCannot delete static attr(%s)from unknown type name(%s)

AgentFramework

13107

NNErrorEngine reported error(%s)AgentFramework

13108


118


AlertEnabled

EventEnabled


NNErrorEngine reported error; errorinfo is (%s)

AgentFramework

13109

NNErrorResource name missing forcommand with minor code%s

AgentFramework

13110

NNErrorType name missing in Addresource (%s) command

AgentFramework

13111

NNErrorUnknownresourcename%sAgentFramework

13112

NNErrorUnknown/Invalid majorcode %s

AgentFramework

13113

NNErrorType name missing forcommand with minor code%s

AgentFramework

13114

NNErrorCannotmodifyattribute (%s)for unknown typename (%s)

AgentFramework

13115

NNErrorAttribute name missing incommand to modify type(%s)

AgentFramework

13116

NNErrorVCSAgMain() is alreadyactive. Agent developershould not callVCSAgMain().

AgentFramework

13117

NNErrorAgent(%s) could not openIPM connection to %s onhost %s

AgentFramework

13118

NNErrorAgent(%s) could not openIPM connection to%s on%s

AgentFramework

13119

NNErrorError receiving from theengine. Agent(%s) is exiting.

AgentFramework

13120

NNErrorAgent(%s) exiting - couldnotopen log file %s

AgentFramework

13121



AlertEnabled

EventEnabled


NNErrorError sending to the engine.Agent(%s) is exiting.

AgentFramework

13123

NNErrorUnknown/Invalid entrypoint

AgentFramework

13124

NNError”When computing theentrypoint arguments forresource (%s)

AgentFramework

13125

NNErrorResource(%s):Attribute (%s)does not belong to thisresource

AgentFramework

13126

NNErrorUnexpected data type (%s)encountered when copyinga data list

AgentFramework

13127

NNErrorResource(%s) - unknownattribute (%s)

AgentFramework

13128

NNErrorResource(%s): Unexpecteddata type (%s) for State

AgentFramework

13129

NNErrorResource(%s): Couldnot findState attribute

AgentFramework

13130

NNErrorResource(%s): Unexpecteddata type (%s) for attribute(%s)

AgentFramework

13131

NNErrorResource %s not foundAgentFramework

13132

NNErrorCanceling thread (%s)AgentFramework

13139

NNErrorCould not find timer entrywith id %s

AgentFramework

13140

NNErrorResource name is NULLAgentFramework

13141


120


AlertEnabled

EventEnabled


NNErrorBad format(%s) in theentrypoint timeoutextension file(%s)

AgentFramework

13142

NNErrorError(%s) when readingentrypoint timeoutextension file (%s)

AgentFramework

13143

NNErrorUnexpected data type (%s)for ArgList

AgentFramework

13144

NNErrorCould not find the ArgListattribute

AgentFramework

13145

NNErrorUnexpected data type (%s)for RegList

AgentFramework

13146

NNErrorAttribute name is NULLAgentFramework

13147

NNErrorType/Resource update:NULL request

AgentFramework

13148

NNErrorType/Resource update:Message header is NULL

AgentFramework

13149

NNErrorType/Resource update:empty type/resource name

AgentFramework

13150

NNErrorType/Resource update:type/resource name is notstring

AgentFramework

13151

NNErrorType/Resource update:attribute name is NULL

AgentFramework

13152

NNErrorType/Resource update:attribute name is not STR

AgentFramework

13153

NNErrorType/Resource update:System name was specified

AgentFramework

13154

NNErrorUnexpectedminor code(%s)for attribute(%s) oftype/resource(%s)

AgentFramework

13155



AlertEnabled

EventEnabled


NNErrorUpdate operation failed forattribute(%s) oftype/resource(%s)

AgentFramework

13156

NNErrorAssertion failed in %s line%s

AgentFramework

13157

NNErrorkill of process (%s) reportederror(%s)

AgentFramework

13158

NNErrorwaitpid for process(%s)reported error(%s)

AgentFramework

13159

NNErrorCould not find thread(%s)for canceling

AgentFramework

13160

NNErrorAttempt to cancelthread(%s) failed. Errorcode(%s)

AgentFramework

13161

NNErrorCould not create threadAgentFramework

13162

NNErrorInvalid thread cancel typerequested

AgentFramework

13170

NNErrorCouldnot set thread-specificdata

AgentFramework

13171

NNErrorCreatePipe() failed whenexecuting (%s). Error %s

AgentFramework

13172

NNErrorDuplicateHandle() failed onfirst duplication. Error %s

AgentFramework

13173

NNErrorDuplicateHandle() failed onsecondduplication. Error%s

AgentFramework

13174

NNErrorReadFile() failed witherror(%s)

AgentFramework

13175

NNError”WaitForSingleObject()returned (%s) for (%s)

AgentFramework

13176

NNError”TerminateProcess() failedfor (%s)

AgentFramework

13177


122


AlertEnabled

EventEnabled


NNError”GetExitCodeProcess() failedfor (%s)

AgentFramework

13178

NNError”CreateProcess() failed for(%s)

AgentFramework

13179

NNError”Agent(%s):WaitForMultipleObjects()failed with %s

AgentFramework

13180

NNError_beginthreadex() failedAgentFramework

13181

NNErrorCloseHandle() failedAgentFramework

13182

NNErrorAgent(%s):WaitForMultipleObjects()failed with error code %s

AgentFramework

13183

NNErrorAgent(%s):WaitForSingleObject() failedwith error code %s

AgentFramework

13184

NNErrorAgent(%s) got error(%s)when deleting file(%s)

AgentFramework

13189

NNErrorAgent(%s): file(%s) fd(%s)has bad refcount(%s)

AgentFramework

13190

NNError”Agent(%s) couldnot unlockfile(%s)

AgentFramework

13191

NNErrorWaitpid failed for script (%s)pid (%s) & errno (%s)

AgentFramework

13193

NNErrorFile (%s) does not exist ORis not executable

AgentFramework

13194

NNErrorscript (%s) stopped due tosignal (%s)

AgentFramework

13195

NNErrorscript (%s) terminated dueto signal (%s)

AgentFramework

13196



AlertEnabled

EventEnabled


NNErrorwaitpid() returnedunexpected status(%s) forscript (%s)

AgentFramework

13197

NNErrorAgent is clearingADMIN_WAIT flag forresource(%s)

AgentFramework

13198

NNErrorAgenthas setADMIN_WAITflag for resource(%s).Administrative interventionis required.

AgentFramework

13199

NNErrorResource(%s) - unknownarg(%s) for ManageFaults

AgentFramework

13200

NNErrorResource(%s) - unknownoption (%s) forclearadminwait

AgentFramework

13201

NNErrorAgent is calling clean forresource(%s) because %ssuccessive invocationsof themonitor procedure did notcomplete within theexpected time.

AgentFramework

13210

NNErrorUCS-2 conversions are notsupported

AgentFramework

13300

NNErrorUnknownencoding type(%s)AgentFramework

13301

NNErrorAgent(%s) encounterederror(%s) when opening thefile(%s)

AgentFramework

13303

NNErrorAgent unable to create firedrill online indicator file(%s) for resource(%s).

AgentFramework

13304

NNErrorError: %sAgent is stopping.Cannot run the Info EP forthe resource(%s)

AgentFramework

13305


124


AlertEnabled

EventEnabled


NNErrorResource(%s): Failed toconvert the new value(%s)in UTF8 for attribute(%s) toOS encoding

AgentFramework

13306

NNErrorAttribute(%s) not found inthe type definition

AgentFramework

13307

NNErrorUnknown attr(%s) vtypeAgentFramework

13308

NNErrorFailed to undo_override forattr(%s) for res(%s)

AgentFramework

13309

NNErrorAttribute(%s) is not a staticoverridden attribute forres(%s). Cannotundo_override for thisattribute

AgentFramework

13310

NNErrorAttribute(%s) doesn’t existfor res(%s)

AgentFramework

13311

NNErrorAttribute(%s) not found forresource(%s)

AgentFramework

13312

NNErrorAttribute(%s) value cannotbe NULL

AgentFramework

13313

NNErrorMissing key(%s) in attribute%s in the resource(%s).Reverting to the value of thiskey in the resource type(%s).

AgentFramework

13314

NNErrorAgent(%s) could not sendconnection information tothe engine on %s

AgentFramework

13315

NNErrorError receiving connectioninformation confirmationfor Agent(%s) from theengine on %s

AgentFramework

13316



AlertEnabled

EventEnabled


NNErrorAgent(%s) failed to sendconnection information.Server refused connection

AgentFramework

13317

NNErrorAgent(%s) received anunexpected message %s

AgentFramework

13318

NNErrorResource(%s) - info entrypoint failed with exitcode(%s)\n

AgentFramework

13319

NNErrorAgent(%s) - Noimplementationprovided forinfo entry point

AgentFramework

13320

NNErrorError executing info entrypoint for resource(%s)

AgentFramework

13321

NNErrorAgent(%s) - info entry pointnot supported for thisversion of the agent

AgentFramework

13322

NNErrorUnexpected data type (%s)for MonitorStatsParam

AgentFramework

13336

NNErrorMissing key(%s) in attribute%s. Cannot computemonitor time statistics forresources of this type(%s).

AgentFramework

13337

NNErrorEntry point info timed outfor resource(%s)

AgentFramework

13338

NNErrorInfo entry point failed forresource(%s)

AgentFramework

13339

NNErrorUnknown log severity(%s)specified

AgentFramework

13340

NNErrorAction entrypoint actiontimed out for resource(%s)

AgentFramework

13343

NNErrorResource(%s) received anoverride command with badarguments

AgentFramework

13344


126


AlertEnabled

EventEnabled


NNErrorResource(%s) received anundo_override commandwith bad arguments

AgentFramework

13345

NNErrorResource(%s): Failed toconvert arglist attribute(%s)from UTF8 to OS encoding

AgentFramework

13346

NNErrorAction entry point ofresource(%s) requested thatthe timeout be extended by(%s) seconds

AgentFramework

13347

NNErrorInfo entry point ofresource(%s) requested thatthe timeout be extended by(%s) seconds

AgentFramework

13348

NNErrorError in converting the inputstring into UCS-2 encoding.Output may be truncated

AgentFramework

13415

NNErrorError in converting the inputstring into UTF-8 encoding.Output may be truncated

AgentFramework

13416

NNErrorUpdate of ResourceInfoattribute failed forresource(%s). Key(%s) beingupdated does not exist

AgentFramework

13422

NNErrorUpdate of ResourceInfoattribute failed forresource(%s). No valuespecified for key(%s) to beadded

AgentFramework

13423

NNErrorUpdate of ResourceInfoattribute failed forresource(%s). Key(%s) to beadded already exists

AgentFramework

13455



AlertEnabled

EventEnabled


NNErrorThis encoding type(%s) isnot supported for theArgList attribute

AgentFramework

13468

NNErrorAgent (%s) exiting - failed tocreate process due to lowsystem resources (errno%s)

AgentFramework

13469


128

veritasâ„¢ cluster server management pack guide for microsoft

Documents