ventum-s products

Products

32

Ventum-S modular system for solutions

ContentS

the Ventum-S modular SyStem 5

Praktikabel StruCtural elementS 9Praktikabel structural elements 10triangular structural elements 15trapeze-shaped structural elements 17

bridge StruCtural elementS 19Bridge section structural elements (version 1) 20Bridge section structural elements (version 2) Vierendeel trusses 22

StairwayS/StePS/ladderS 25stairway structural elements 26step structural elements 28ladder structural elements 31

rigid StruCtural elementS 33Partition walls/ceilings/concert halls 35

modular SyStem aCCeSSorieS 37corner sockets for bridge structural elements 43moving elements 44floor panels/construction panels/lightweight panels 45intermediate frames 47safety rails 47

Ventum-S SyStem ramPS 49ramp adapters, initial ramp sections 50examples of usage 51

Page Page

Ventum-S SPeCtator StandS 53stand Praktikabel structural elements 56safety rails in public areas 57 modular SyStem module integration 59stage trolley locking device 61Bridge drive modules 61

Ventum-S turntableS 63

modular SyStem turntableS 63turntables with a rotating ring design 68turntables with a bridge section design 69turntable panels 70

turntable driVe SyStemS 74external drive modules 74internal drive modules 74slip rings 75

SPeCial aluminium deSignS 79

Plug-in feet PlatformS 81


5

the Ventum-S modular SyStemVariability in all dimensions for your stage.

are you looking for one system for:

stage installations, stages, stands and technical stage sets, constructing trade fair stands, walk-in, multi-storey designs, camera and lighting towers, ramps, stairways and stairway equipment, ceilings, three-dimensional lighting elements, illuminatefabric walls ... ?

the modular system components and component families can be combined with each other in a vari-ety of ways and therefore create a variety of solu-tions; the basic equipment consists of many parts.

a portfolio of possible solutions for your projects – available at any time …

… with one system that creates results with the speed that you need, guarantees safety during cons-truction because of the structure of the system and enables you to plan and look after your fi nances in the long term. you can reliably introduce your ideas with an unlimited number of options.

for component compatibility plusmodular system variability.

each component can be used in the component family and is therefore useful when developing solutions.

the component families for the Praktikabel, bridge and stairway modules all function according to this system. these component families complement each other and are completely compatible within the modular system so that you can fi nd an eff ective solution.

! component compatibility plus modular system variability

4

Ventum-s modular system

76


76

!$ component compatibility plus modular system variability

Ventum-s modular system


9

Praktikabel StruCtural elementSthe “core” of the Ventum-s modular system.

the system:

the Praktikabel structural elements (hinged units) are used to build any kind of structures in theat-re and event technology or for sets or trade fair construction work. the elements can be assembled next to each other, on top of each other or in step formation.

dimensions:

5 Length: 0.5 m / 1.0 m / 1.5 m / 2.0 m5 width: 0.5 m / 1.0 m5 Height: 0.166 m / 0.333 m / ... / 2.0 m5 storage area: (l + W) x 0.05 m, collapsed

we also off er special individual dimensions; please get in touch with us. the Praktikabel structural ele-ments are manufactured with a height of 166.6 mm or with 200 mm, if required. the production height of the Praktikabel structural elements is the same as the nominal height minus 25 mm. the nominal height is achieved with a fl oor panel or an intermedi-ate frame (25 mm).

the Praktikabel structural elements with triangular and trapeze shapes complete the portfolio.

storage:

the elements have patented corner hinges and can be collapsed diagonally. you only need a fraction of the original space to store them. the space-saving storage resulting from this and the low transport volumes guarantee eff ective use.

Key parameters to achieve eff ectivesolutions:

5 Praktikabel elements: 90 stk.5 construction volume: 127 m3

5 storage volume: 12 m3

5 constructed area: 70 m2 5 storage space: 6 m2

High-strength aluminium guarantees defi ned load ratings and is extremely light. a Praktikabel structu-ral element only weighs 12.0 kg.

the elements can be equipped with brackets and corner sockets to cope with special loads.

PraktikaBel structural elements

$ Volume when constructed and storage space for the Praktikabel structural elements

8


1110

Praktikabel StruCtural elementSProduct selection

the elements can be collapsed at the corner hinges and the sto-rage area is then (l x W) x 0.05 m.

the production height of the elements is the nominal height mi-nus 25 mm. the nominal height is the result of the units plus a 25 mm intermediate frame or a floor panel.

item descriPtion l X W X H material WeigHt

1 Praktikabel structural element 0.5x0.5x0.166 m al (untreated) 4.4 kg






































Praktikabel structural elements1.0 x 0.5 x h

Praktikabel structural elements 1.0 x 1.0 x h




1312



























































1514


1 r-B-element (dd) 1.0x1.0x2.000 m al (untreated) 16.7 kg

2 r-B-element (dd) 2.0x1.0x2.000 m al (untreated) 24.4 kg

3 r-B-element (de) 1.0x1.0x2.000 m al (untreated) 16.7 kg

4 r-B-element (de) 2.0x1.0x2.000 m al (untreated) 24.4 kg

5 r-B-element (df) 1.0x0.5x2.000 m al (untreated) 16.0 kg






df 5front passageway ds 5side passageway

dd 5double passageway de 5corner passageway

other combinations available on request!

df ds dd de

Praktikabel structural elements with passageway


1 corner socket for Praktikabel structural element al (untreated) 0.1 kg

2 strut (brace) reinforced area 1.0x2.0 m al (untreated) 1.3 kg

stabilisation elements

triangular StruCtural elementSProduct selection

item descriPtion 1st - 3rd side X H material WeigHt

1 triangular structural element 1.0x1.0x1.41x0.166 m al (untreated) 6.1 kg












the production height of the elements is the nominal height mi-nus 25 mm. the nominal height is the result of the units plus a 25 mm intermediate frame or a floor panel.

triangular structural elements 1.0 x 1.0 x 1.41 x h

the elements can be collapsed inwards.

the storage area measures 1.25 x 0.1 m.



1716

































traPeze-ShaPed StruCtural elementSProduct selection

Production dimensions required:

5 lenght l

5 Width b1 und b2

5 Height h (166 mm system height)

trapeze-shaped structural elements Dimensions in line with specifications

item descriPtion

1 Price available on request



19

bridge SeCtion StruCtural elementS eff ectiveness on a horizontal level. Flexibility and safety for building workwith aluminium superstructures

the system:

the bridge structural elements are suitable for pro-viding level spaces with any kind of incline and for aluminium superstructure work in conjunction with Praktikabel structural elements. traversing structu-res are defi ned statically and can be safely used to meet your planning objectives.

the bridge sections are designed as an extruded profi le (version 1) or as a Vierendeel truss (version 2). the accessories enhance the options for using the system with plug-in feet receptacles, moving trolleys and systematically integrating locking de-vices and motorised drive systems.

system integration:

5 corner sockets5 moving elements5 stage carriage locking devices5 Bridge section drive modules

dimensions:

5 length: 1.0 m / 2.0 m / 3.0 m / 4.0 m / 5.0 m / 6.0 m5 Width: 0.5 m / 1.0 m5 Version 1: extruded profi le5 Height Version 1: 141.6 mm5 Version 2: Vierendeel truss5 Height Version 2: 116.6 / 141.6 / 308.3 mm

5 We can manufacture special dimensions in line with your requirements, if required. the produc-tion height of the bridge structural elements is the nominal height. the 166 mm system height is created using a fl oor panel or intermediate frame.

Bridge section structural elements

! insert carriage

18


2120

bridge SeCtion StruCtural elementS(Version 1)

Product selection


1 Bridge structural elements (1) 1.0x0.5x0.141 m al (untreated) 7.6 kg






The bridge structural elements are made of a special profile. the gaps in the bridges guarantee compatibility with the modular system; the elements are suitable for static su-perstructure work. The profile height is the same as the nominal height; the system height is created using a 25 mm intermediate frame or a floor panel.

Bridge structural elements (1) l x 0.5 x 0.141 m










1 Bridge section (1) h=141.6 mm/l=1000 mm al (untreated) 2.6 kg






separate bridge structural element section: drilled

vertically and horizontally in the system dimensi-

ons; can be used with gaps for vertical assembly

work; cut on both sides with a 45° join.

material: en aW-6060 t66

Bridge section (1)



2322

zargen / bridge StruCtural elementS (Version 2) Vierendeel truSSeS

Product selection









1 Bridge structural elements (2W) 1.0x1.0x0.116 m al (untreated) 8.5 kg




















flat carriage parts l x b x 0.116 m

Bridge structural elements (2) l x b x 0.308 m








the bridge section structural elements are manufactured as Vie-rendeel trusses; the ratio between their load rating and their own weight is absolutely ideal. the production height is the nominal height; the system height is created using a 25 mm thick interme-diate frame or a floor panel.

The flat carriage parts are used where a final carri-

age height of 166.6 mm has to be achieved.




25

stairWaYs / steps / laDDerssteps to provide safety.

Ventum-S stairway structural elements:

5 step height: 0.166 m / 0.2 m5 depth: 0.2 / 0.25 / 0.3 m5 Width: 0.5 / 1.0 m5 overall height: 2.0 m

Frame stairway: frame stairways can be assembled as complete stage stairways with variable widths without any intermediate space.

Stringboard stairway: a stringboard stairway is used as an invisible stairway or a folding stairway.

Ventum-S step structural elements:

5 step height: 0.166 m / 0.2 m 5 depth: 0.2 / 0.25 / 0.3 m5 Width: 0.5 / 1.0 m5 overall height: 0.166 m / 0.2 m bis 1.0 m

the steps are used as variable lean-to elements, which create suitable access to platforms and struc-tures with several levels with between one and six steps.

Ventum-S ladder structural elements:

5 step height: 0.333 m5 Width: 0.4 m5 overall height: 1.0 m ... 2.0 m

the ladder structural elements complete the port-folio for multi-fl oor structures as a space-saving option; full modular system compatibility is guaran-teed here too.

the system:

the stairways, steps and ladders provide complete variability on several levels. they can be used as a component family and in the modular system in terms of their width and height. you will fi nd the suitable solution for all levels in a wide variety of specifi c applications.

dimensions and designs:

STairwayS / STepS / LaDDerS

Safety rails and fl oor coatings:

5 safety rails Stairways and steps with more than fi ve steps must have safety rails. We provide safety rails that are compatible with the modular system. the assembly work takes place using drilled holes in the system at the side; the safety rails are col lapsed for storage and transport and therefore save space.

5 finish for stairways and steps the Ventum-s steps are covered with plywood boards as their standard feature. the riser and sides are not faced. we can off er surface fi nishes (e.g. acrylic glass) and facing for the risers and sides as an individual option, if required.

24


2726

frame stairways are suitable for construction next

to each other without any crossover (e.g. complete

stage stairways).

item descriPtion H/d/W material WeigHt

1 stairway structural element t1/10 0.200/0.200/1.0 m al/plywood 48.5 kg

2 stairway structural element t1.1/10 0.200/0.200/0.5 m al/plywood 32.0 kg














1 stairway structural element W1/10 0.200/0.200/1.0 m al/plywood 42.1 kg

2 stairway structural element W1.1/10 0.200/0.200/0.5 m al/plywood 26.9 kg


1 stairway safety rail 10 steps/s=200/d=200 mm al (untreated) 7.0 kg






stage safety rails for stairway structural elements

(no safety rails for the public area), attached with

screws

stairway structural elements stringboard stairway

stairway safety rails for frame stairways/ stringboard stairways

stairway structural elements frame stairway


the basic structure is solidly welded; the step surface is coated with phenol resin as the standard feature. Other surface finishes are available on request.

We can manufacture special dimensions and special designs for stairways/steps with a wide variety of options, e.g. as a conical stairway, a pyramid-shaped, a pa-rabola-shaped or a spiral stairway. We can make individual step height and depth dimensions in line with your wishes.

Stairway StruCtural elementS

Product selection

(H/d/W) = step height/depth/width


2928


the basic structure is solidly welded; the step surface is coated with phenol resin as the standard feature. Other surface finishes are available on request.

step structural elementsstep height 166 mm / depth 200 mm

SteP StruCtural elementS Product selection


1 1 step (h=0.166 m) 0.166/0.200/1.0 m al/plywood 4.8 kg

2 2 steps (h=0.333 m) 0.166/0.200/1.0 m al/plywood 8.6 kg











step structural elementsHeight 166 mm / depth 250 mm

step structural elementsHeight 166 mm / depth 300 mm





























3130


stage safety rails for step structural elements,

no safety rails for the public area, attached with

screws

step safety rails – attached with screws

item descriPtion H/d/W material

7 step safety rail 3 steps/s=166/a=200 mm al (untreated)
























distance between rungs 0.333 m

oa5 Without handleal 5 With handle on the leftar 5 With handle on the right2a 5 double handle (left + right)

other heights are available on request.

ladder elements – for assembly in system structural elements

ladder elementSProduct selection

item descriPtion w / H material WeigHt

1 ladder 2-oa w=0.4/h=2.0 m al (untreated) 4.4 kg

2 ladder 2-al w=0.4/h=2.0 m al (untreated) 6.3 kg

3 ladder 2-ar w=0.4/h=2.0 m al (untreated) 6.3 kg

4 ladder 2-2a w=0.4/h=2.0 m al (untreated) 8.2 kg



33

rigid StruCtural elementS Variability for partitions, ramps and ceilings.

the system:

the rigid structural elements are used for variable even structures. With a wide variety of geometrical shapes and low load ratings, the rigid structural ele-ments can be ideally adapted to the application at hand. the basic structural shapes can be combined with the modular system elements and are available in the dimensions listed. We develop and manufac-ture special shapes in line with your requirements.

rigid structural elements

dimensions:

5 length: 1.0 m / 2.0 m / 3.0 m / 4.0 m / 5.0 m / 6.0 m 5 Width: 0.5 m / 1.0 m 5 Height: 0.06 m

We can manufacture triangles, trapezes, polygons or curved elements in special shapes. theVentum-S fl oor panels can be used for areas where people have to walk.

accessories:

5 support angles5 spacers5 adjustable feet5 connectors

surfaces:

5 Wood5 acrylic glass5 other materials on requestareas of use:

5 Partitions5 ramps5 ceilings5 concert rooms

the variable concert room illustrates how the rigid structural elements can be used. rectangular and trapeze-shaped elements with various heights are used for the side walls and are set up at diff erent angles and connected with spacers. ceilings hung at an angle form the top fi nish. it is quick and easy to adapt the concert room size to meet your require-ments by changing the number of elements.

32

$ rigid structural elements in the variable concert room


35

rigid StruCtural elementS Product selection

item descriPtion w / H (m) material WeigHt

1 rigid structural element w=0.5/h=0.06 m (per m) al (untreated) 3.5 kg





34


37

modular SyStem aCCeSSorieS introducing project requirements in great detail.

the system:

the accessories supplement the modular system standard elements and off er a broad range of uses. the accessories become the key to maximum varia-bility and safety both in the component families and modular system usage.

a summary of accessories:

5 corner sockets and plug-in feet forbridge structural elements

5 moving elements5 floor panels / construction panels / lightweight panels5 intermediate frames5 safety rails

extending the portfolio of solutions:

the accessories guarantee that the modular system works well for a wide variety of stage projects. our ongoing de-velopment of accessory components enables you to meet individual project require-ments.

modular system accessories

! lifting roller

! Height-adjustable peg ends for plug-in feet

36


3938

Ventum-s moving elements

moving element: insert carriage

Bridge structural elements become mobile quickly and easily with the insert carriage. the insert carria-ges are equipped with direction locks or castors and have a functional design and a low weight of 5.2 kg.

moving element: lock plus wheel

By using locks plus wheels with bridge structural elements, it is easy to position elements on the outsides of the bridge units. the rollers on the locks plus wheels are available as castors, direction locks or total locks.

moving elements: lifting roller

this makes Praktikabel structural elements mobile, either individually or as stage structures.

5 rapid assembly5 sturdy design 5 floor clearance: 25 mm

! stage trolley with locks plus wheels

! Praktikabel with lifting rollers


Ventum-s corner socketsfor plug-in feet

Bridge structural elements in version 1 can be com-bined with corner sockets and plug-in feet to form plug-in feet platforms and platform areas.these areas can be set up both on a level and with steps.

! corner socket

" insert carriage

! lock plus wheel

# lifting roller


4140


construction panels

construction panels as 24 mm plywood panels with positioning angles and vertical modular system drill holes. they enable you to screw through the con-necting element and therefore create the necessary static vertical superstructure layers in the modular system elements for intermediate levels where peo-ple need to walk.

floor panels

floor panels with a 24 mm plywood design with an end-to-end surface for covering platforms, stages and stands.

The positioning angles inserted in the floor panels allow them to be screwed to substructures so that they meet requirements for public areas too.

5 standard panel locking devices: screw joint on the positioning angle with the modular system design.

5 optional panel locking device with direct screw joint or lock.

! construction panel

lightweight panels

effectiveness on a level. Flexibility and safety for the aluminium superstructures.

your projects become simpler.

Ventum-s has developed a lightweight panel, which has the load rating of a plywood panel.

the lightweight panel supplements the modular system portfolio for efficient designs for stage cons-truction work. the weight of 11.2 kgm2, a load rating of up to 750 kg/m2, suitability for use indoors and outdoors and the robust design provide the ideal supplement to stage construction work.

key parameters:

5 dimensions: 2 x1 m, 1x1 m5 Panel thickness: 24 mm5 Weight: 11.2 kg/m2

5 load rating: up to 750 kg/m2

technical data – conditions of use:

5 Weight: 11.20 kg/m2 (cf. plywood 16.2 kg/m2, one panel 2 x 1 x 0.024 m weighs 22.4 kg)

5 structure: Ventum-s innocore foam core, 6 mm plywood on both sides (total thickness 24 mm)5 surface: plywood (coated with phenol resin, rough surface on one side, special designs available)5 edges: plywood skirting (all round)5 load rating : 750 kg/m2 when completely resting on the substructure (tested by otto-mohr laboratorium at tu dresden, 2014)

5 minimum order amount: 10 items at 2 x 1 m (special designs from 50 items upwards)5 delivery time: approx. 6 weeks (for standard dimensions: special dimensions/items by arrangement)

Conditions of use and instructions for use:

Please note that any screw connections will provide adequate grip for most applications because of the 6 mm covering layers. However, they do not provide the same rigidity as a 24 mm full plywood panel. any perforation of the load rating structure by screws or drill holes may impair the load rating to a considera-ble degree.


4342

corner socket for assembly in bridge structural

elements (version 1). suitable plug-in feet 60x60

fits into corner socket for bridge structural

elements (version 1)

item descriPtion material WeigHt

1 corner socket for bridge structural elements (1) cast aluminium 0.7 kg

item descriPtion dimensions material WeigHt

1 Plug-in feet for bridge

structural element

for structural height of

0.333 m al (untreated) 0.3 kg


structural element




structural element




structural element




structural element



Plug-in feet - for bridge structural elements(Version 1)

corner socket – for bridge structural elements (Version 1)

corner socKets / pluG-in Feet Forbridge StruCtural elementSProduct selection

modular SyStem aCCeSSorieS


Ventum-s intermediate frames

the key component for structures with the system dimensions.

the step height is achieved by using a panel or an intermediate frame (d=25 mm). one of the two com-ponents must be used to provide the standard sys-tem height when constructing items on top of each other. the production height of the modular system elements comes from the system dimension minus 25 mm. the use of the intermediate frames creates considerable weight reductions in comparison with construction panels. structures can be pre-assem-bled and taken on to the stage with ideal weights if the installations have to be completed with a tight time schedule.

! safety rail

! intermediate frame

Ventum-s safety rails

safety rails are designed for use in the non-public area.

they are used to protect edges of stages, stage sets and multi-layer structures consisting of basic modu-lar system materials.


4544


item descriPtion sPecification material WeigHt

1 insert carriage W0 (1.0 m) Without wheels al (untreated) 3.6 kg

2 insert carriage W1 (1.0 m) 2 fixed wheels al/steel 7.4 kg

3 insert carriage W2 (1.0 m) 2 casters al/steel 7.4 kg

4 insert carriage W3 (1.0 m) 2 wheels with direction locks al/steel 7.5 kg

solidly welded, for screw assembly in bridge structural elements, both

versions 1 and 2 (floor clearance 25 mm)

moving elements – insert carriage

moVing elementSProduct selection

item descriPtion load rating

1 lifting roller (bridge structural element) load rating 160 kg

2 lifting roller (Praktikabel structural element) load rating 160 kg

to move bridge structural elements or Praktikabel structural elements

(corner assembly – 0.333 mm clearance required)

moving elements – lifting rollers

item descriPtion sPecification material WeigHt

1 lock plus wheel k1 Without brakes al/steel 3.2 kg

2 lock plus wheel k2 With brake roller al/steel 3.2 kg

for external assembly with bridge structural elements. k1/2 can be

combined with an insert carriage. k2 provides a braking function.

moving elements – lock plus wheel

item descriPtion

1 Price and design available on request

telescopic plug-in feet for bridge structural elements

Corner SoCketS/Plug-in feet for bridge StruCtural elementSProduct selection


4746

stage safety rails – non-public area

stage safety rails for Praktikabel and bridge structural elements; not safety rails for a public area. finish with or without a base board.

intermediate frames are assembled on level areas

where people do not walk so as to provide the

system height. there is a 90% weight reduction in

comparison with a floor panel.

item descriPtion HeigHT /wB (m) material WeigHt

1 safety rail (stage) h=1.0 m/w=1.0 m al (untreated) 3.3 kg

2 safety rail (stage) h=1.0 m/w=1.0 m/base board al (untreated) 4.3 kg





9 skirting board extra Per m al (untreated) 0.7 kg


Safety railSProduct selection

intermediate frameProduct selection

intermediate frame for Praktikabel and bridge structural elements

item descriPtion l X W X d material WeigHt

1 intermediate frame 0.5x0.5x0.025 m al (untreated) 1.2 kg






construction panels for modular system usage


1 construction panel (PH) 0.5x0.5x0.024 m Plywood 4.0 kg






coated with phenol resin on both sides (dark

brown, rough surface on one side); edges varni-

shed; with positioning angles; drilled vertically with

the system dimensions; used for intermediate

levels where people walk

lightweight panels for modular system usage


1 lightweight panel (PH) 2.0x1.0x0.024 m Plywood/innocore 22.4 kg

2 lightweight panel (PH) 1.0x1.0x0.024 m Plywood/innocore 11.2 kg



shed; with positioning angles (drilled for screwing

to system elements)

Floor panels / construction panels /

lightweight PanelSProduct selection

floor panels for modular system usage


1 floor panel (PH) 0.5x0.5x0.024 m Plywood 4.0 kg








shed; with positioning angles (drilled for screwing

to system elements)


49

Ventum-S SyStem ramPS Variability for inclines.

the system:

the bridge structural elements ae set up in conjunc-tion with the initial slopes and adapter elements to form system ramps. By combining several bridge structural elements, it is possible to create areas with variable sizes. the adapters are made as stan-dard features for 1/6 and 1/12 inclines. the ramps always end at a system height and can be supple-mented with modular system structures.

special designs:

compatibility within the modular system is used for special designs. the bridge structural elements form the load bearing structure and the rigid structural elements provide the geometric shapes that you require. We accompany projects with our develop-ment, planning and production work from the initial idea to its implementation.

! ramp initial section

! elliptical stage ramp

system usage:

the system ramps have excellent transverse and longitudinal stability and can be adapted to the desired substructure height by combining them with Praktikabel structural elements in variable ways.

other uses:

5 transport ramp for a grand piano 5 access for the disabled

" ramp adapter

48

Ventum-s system ramPs


51

Ventum-S SyStem ramPS Product selection

ramp adapters

ramp initial section

item descriPtion l X W material WeigHt

1 ramp adapter 1/6 1.0x1.0 m al (untreated) 6.1 kg

2 ramp adapter 1-1/12 1.0x1.0 m al (untreated) 5.8 kg

3 ramp adapter 2-1/12 1.0x1.0 m al (untreated) 5.3 kg

item descriPtion incline material

1 ramp initial section 1/6 for 1/6 ramp al/plywood

2 ramp initial section 1/12 for 1/12 ramp al/plywood

lean-to initial sections of ramps consisting of

bridge structural elements with a 1/6 or 1/12 incli-

ne (+5.0 mm on +141.6 mm), wedge made of wood

initial sections for other ramps or with a solid

aluminium wedge available on request.

Ventum-s system ramPs

50

! nordhausen ramp project


53

StandSVariable spectator stands using the modular system principle.

the system:

the Ventum-s modular system creates stands quickly and with great variations. the specially rein-forced Praktikabel structural elements for stands are designed for use in areas accessible to the public. they are similar to the standard Praktikabel structu-ral elements in their functions and modular system usage and can also be utilised for scenery and de-coration purposes. a stand design can then become part of the basic modular system equipment after its original use.

the modular system for stands:

the Praktikabel and bridge structural elements form the basic structure. the modular system step height of 166.6 mm is suitable for use if there is little space available. When using the double height (333.3 mm), the view from all the seats is ideal. When setting up stands in the public arena, we supply all the neces-sary certifi cation in line with the requirements. we design the necessary accessories like safety rails, intermediate frames and step lighting in line with individual plans and as part of our consultancy work.

stand Praktikabel structural elements:

the load rating in the standard Praktikabel structural elements when used as stands is achieved through welded corner brackets or diagonal struts. they clearly distinguish the standard Praktikabel structu-ral elements from the stand Praktikabel structural elements.

Ventum-s sPectator stands

! Praktikabel structural element with corner bracket

52


We can advise you individu-ally so that you obtain the best possible confi guration for your stand project

you purchase one solution from us and obtain a range of solutions for subsequent projects – your investment will pay off over and again – defi nitely.for your stand project defi nitely.

54 55

fiVe Stand oPtionS fromone range of PartS



5756


1 Praktikabel structural element (t) 1.0x1.0x0.166 m al (untreated) 7.1 kg












safety rail structural elements – public areas

item descriPtion


Safety railS in the PubliC areaProduct selection

Stand Praktikabel StruCtural elementSProduct selection

stand Praktikabel structural elements 1.0 x 1.0 x h

substructure Praktikabel structural elements l x 1.0 x 2.0

stand Praktikabel structural elements 2.0 x 1.0 x h















1 Praktikabel structural element (u) 1.0x1.0x2.0 m al (untreated) 22.0 kg

2 Praktikabel structural element (u) 2.0x1.0x2.0 m al (untreated) 32.0 kg



59

modular SyStem module integration move and lock stage carriages in a defi ned way.

modular system module integration

the system:

the bridge structural elements used as a stage carriage serve as the basic framework for motors, locking modules, steering equipment and recharge-able batteries.

the opportunities for using stage carriages are ex-tended in the system so that they move or lock in a defi ned manner.

locking device:

to halt stage carriages during scenes and in stage settings. The locking device off ers safety and free-dom of movement for stage structures that move during the show and are used in stationary mode. the requirements for use on the stage are ideally met with contact pressure of 1.0 kn and reliable electric locking modules.

the system structure:

5 modular system that can be extended at will 5 Basic module with 4 locks and one set of controls5 operated by remote controls and directly5 optional adaptable remote controls for operating several modules5 Battery charging through a charging socket from

outside while still inserted (without having to remove the panel or the decorations).

Performance data:

5 driving power: 0.4 / 1.5 kW5 contact pressure: 1.0 kn5 Height: 166.6 mm5 Battery operations: 4 h width 80 locking procedures 5 Charging time: < 10 h depending on how fl at the batteries are

! controls for locking device

58


6160

Bridge drive module

item descriPtion


bridge driVe moduleSProduct selection

Stage Carriage loCkSProduct selection

locking device for stage carriages

item descriPtion

1 locking device locking module

2 locking device controls

motorised power units:

to move stage carriages and sets on stage. the drive and control options are adjusted ideally to the project re-quirements: from a simple straight ahead movement to free mobility and even defi ned se-quences of movements.

the system structure:

5 modular system that can be extended at will5 external/integrated control unit5 direct/remote controls5 mains/battery operations

Performance data:

5 driving power: 0.4 /1.5 kW5 torque: 2.56/10.2 nm5 nominal rpm: 1360/1400 1/min5 Height: 166.6/200 mm5 operating mode: s1 (permanent)

! Bridge drive module

modular system module integration


63

turntable modular SyStemaluminium frame design and panels for variable turntables.

the system:

the Ventum-s rotating ring turntables develop the modular system principle even further in a logical way.

the example of the 8.0 m turntable illustrates the modular system very well: a turntable with a diame-ter of 8.0 m can also be used for 4.0 m and 6.0 m sizes. turning rings, which expand the 4.0 m inner ring, can be used separately and combined with each other.

key parameters:

5 Height: 166.6 mm 5 load rating: 2.5 kn/m2 optionally up to 5.0 kn/m2 5 type of drive: inner or outer drive system

dimensions:

5 Diameter: 4.0 / 5.0 / 6.0 / 7.0 ... 14.0 m 5 turning rings: from Ø4.0 m at 1.0 m-intervals5 Height: 0.166 / 0.200 m

We can provide special dimensions for the intervals, if required.

turntable options:

5 Ø4.0 m5 Ø6.0 m5 Ø8.0 m

turning ring options:

5 Ø4.0 m expanded to Ø6.0 m5 Ø4.0 m expanded to Ø8.0 m5 Ø6.0 m expanded to Ø8.0 m

there are therefore six turntable options with a Ventum-s 8.0 m turntable.

the turning rings can also be operated as counter-rotating units.

turntaBle modular system

! turning ring Ø4.0 m expanded to Ø6.0 m

! turntable Ø4.0 m

Ventum-s turntablesrotating ring design

62


656464

turning ring turntable Ø8 m in the SiX deSign oPtionS


turntable: Ø4.0 m

turning ring: Ø4.0 expanded to Ø6.0 m

turntable: Ø6.0 m

turning ring: Ø6.0 expanded to Ø8.0 m

turntable: Ø8.0 m turning ring: Ø4.0 expanded to Ø8.0 m


6766

Ventum-s turntablesBridge design

the system:

turntables can be created from bridge structural elements in the Ventum-s modular system. the combination of bridge units with turning centres, wheel sockets and matching parts enables you to use the bridge structural elements that you already own in an ideal manner and generates 50% lower costs than a new aluminium structure. this supple-ments your use of basic bridge structural elements and allows you to create turntables with the desired diameters.

dimensions:

5 Height: 200 mm5 diameter: on request

key parameters:

5 load rating: 2.5 kn/m2 optionally up to 5.0 kn/m2 5 type of drive: internal drive

turntable panel

turntable panel for rotating ring design:

The floor panels are segmented in line with the basic structure and designed with several corners at the crossover areas of the rotating rings. the outer ring for the turntable configuration is round in each case.

The floor panels are equipped with positioning ang-les as a standard feature and are laid on the alumi-nium sub-structure.

a vertical direct attachment or locking device is available as an option.

turntable panel, bridge design:

The floor panels are used in rectangular form in line with the dimensions of the bridge structural ele-ments and are supplemented with rounded mat-ching parts so that you create the diameters that you require.

The floor panels are equipped with positioning ang-les as a standard feature and are laid on the alumi-nium sub-structure.

a vertical direct attachment and locking device are available as options.

Surfaces:

5 Plywood – dark brown, coated with phenol resin (ph)5 Plywood varnished with the colour of ebony5 other coatings available on request

! turntable, bridge design

! matching part for turntable, bridge design

! matching part for turntable, bridge design

! Panel for inner circle, rotating ring design

! Panel for attached ring, rotating ring design

! complete panel, rotating ring design


! turning centre turntable, bridge design


6968

turntableS, rotating ring deSignProduct selection

turntableS with bridge deSignProduct selection

Basic inner ring structure

Basic structure of attached ring

complete basic structure

turntables with bridge design

item descriPtion outer diameter material WeigHt

1 Basic inner ring structure Ø4.0 m al (untreated) 103.0 kg

item descriPtion innen- /OuTer DiameTer material WeigHt

1 Basic structure of

attached ring Ø4.0 m expanded to Ø6.0 m al (untreated) 150.0 kg
















1 Basic structure of turntable Ø6.0 m al (untreated) 253.0 kg






7 Basic structure of turntable Ø12.0 m al (untreated) 1,165.0 kg

Polygon, solidly welded individual segments for assembly with screws; central support rotating

ring; friction ring on the outer diameter; compatible with 4.0 m attached rings

Height for outer drive 141.6 mm / for inner drive 175 mm

other diameters available on request!

Basic structure from bridge structural elements, equipped with turning

centre, wheels and drive/control components, supplemented by polygon-

shaped matching parts.

Polygon, solidly welded individual segments for

assembly with screws; friction ring with outer

diameter; compatible with attached rings on the

inner and outer diameters; usable as a separate

turning ring

Height: for outer drive 141.6 mm /

for inner drive 175 mm


Polygon, solidly welded individual segments for

assembly with screws; friction ring with outer

diameter; compatible with attached rings.


item descriPtion



7170

turntable PanelSProduct selection


Panel for attached ring (rounded/coated with phenol resin)


1 Panel for attached ring (r/ph) Ø4.0 m to Ø6.0 m Plywood 255.0 kg







8 Panel for attached ring (r/ph) Ø8.0 m to Ø12.0 m Plywood 1,018.0 kg

Plywood, coated dark brown with phenol resin

(ph), polygon-shaped on the inner diameter, roun-

ded (r) on the outer diameter for use as an end

ring; segmented according to the basic structure;

laid on top; with positioning angles

other dimensions available on request!

Panel for attached ring(polygon-shaped/coated with phenol resin)


1 Panel for attached ring (m/ph) Ø4.0 m to Ø6.0 m Plywood 255.0 kg







8 Panel for attached ring (m/ph) Ø8.0 m to Ø12.0 m Plywood 1,018.0 kg


(ph); polygon-shaped on the inner and outer

diameters (m) for use with other attached rings;

segmented according to the basic structure; laid

on top; with positioning angles


Panel for inner circle (coated with phenol resin)


1 Panel for inner circle (m/ph) Ø4.0 m Plywood 204.0 kg

2 Panel for inner circle (r/ph) Ø4.0 m Plywood 204.0 kg

Plywood, coated dark brown with phenol resin (ph)

on the outer diameter, rounded (r) as a separate

turntable or polygon-shaped (m) for use with

attached rings; segmented according to the basic

structure; laid on top; with positioning angles


complete panel (coated with phenol resin)


1 Panel for turntable (ph) Ø6.0 m Plywood 458.0 kg



4 Panel for turntable (ph) Ø9.0 m Plywood 1,031.0 kg





(ph), rounded on the outer diameter; segmented

according to the basic structure; laid on top; with

positioning angles




7372

Panel for attached ring (rounded/varnished with ebony wood colour)


1 Panel for attached ring (r/eb) Ø4.0 m to Ø6.0 m Plywood 255.0 kg







8 Panel for attached ring (r/eb) Ø8.0 m to Ø12.0 m Plywood 1,018.0 kg

Plywood, varnished with ebony wood colour (eb);

polygon-shaped on the inner and outer diameter

(r) for use as an end ring; segmented according to

the basic structure; laid on top; with positioning

angles


Panel for attached ring (polygon-shaped/varnished with ebony wood colour)


1 Panel for attached ring (m/eb) Ø4.0 m to Ø6.0 m Plywood 255.0 kg







8 Panel for attached ring (m/eb) Ø8.0 m to Ø12.0 m Plywood 1,018.0 kg

Plywood, varnished with ebony wood colour (eb);

polygon-shaped on the inner and outer diameter

(r) for use with other attached rings; segmented


positioning angles


complete panel (varnished with ebony wood colour)


1 Panel for turntable (eb) Ø6.0 m Plywood 458.0 kg



4 Panel for turntable (eb) Ø9.0 m Plywood 1,031.0 kg




Plywood, varnished with ebony wood colour

(eb), rounded on the outer diameter; segmented


positioning angles


Panel for inner circle (varnished with ebony wood colour)


1 Panel for inner circle (m/eb) Ø4.0 m Plywood 204.0 kg

3 Panel for inner circle (r/eb) Ø4.0 m Plywood 204.0 kg

Plywood, varnished with ebony wood colour (eb), roun-

ded (r) on the outer diameter as a separate turntable

or polygon-shaped (m) for use with attached rings;

segmented according to the basic structure; laid on

top; with positioning angles




7574

Ventum-s turntable drive modules

external 1.5 kw drive modules:

the external drive modules have been specially developed for Ventum-s turntables. the drives are assembled very easily. to start operating the unit, the drive module is fi xed to the stage fl oor by screws and is then pressed on to the turntable’s friction ring using a spring adjustment. an oscillating bea-ring evens out any uneven elements on the running surface and ensures uniform contact pressure. external drives can be used both for complete turn-tables and also for turning rings that run separately. Pressure rollers are mounted for turning rings in order to guide the turntable in its position.

key parameters:

5 Power voltage: 230 V, 400 V - at 50 Hz 5 max. peripheral force: 1000 n 5 Height: 166.6 mm, 141.6 mm can be inserted in substructure without a panel5 drive system: s1 (permanent drive)5 number of drives: depends on dynamic load rating

internal 0.4/1.5 kw drive modules:

the internal drive modules are designed as friction wheel drive systems for insertion in the aluminium construction. they consist of a dc asynchronous motor, planetary gearing and a Vulkollan drive wheel. a low-noise locking brake, spring-loaded bea-rings and systems for controlling the positioning and sequences are available as options.

key parameters for 0.4/1.5 kw:

5 Power voltage: 230V, 400V - at 50Hz5 nominal rpm: 1360/1400 1/min 5 nominal torque: 2.56/10.2 nm5 max. torque: 5.37/16.6 nm 5 type of drive: s1 (permanent)5 Height: 166.6/200 mm5 number of drives: depends on dynamic load rating

Ventum-s turntable controls

Ventum-S turntable controls:

the basic control unit is linked to a cable, has an infi nitely variable speed regulator, is equipped for a maximum circumferential speed of 1 m/2 with a choice of direction of rotation (left/right) and has an emergency off switch. The unit is operated via a control unit or a control/remote control panel that is available as an option. the basic functions can be extended by any number of control options.

Control options:

5 control panel/remote controls5 Positioning and controlling sequences the detailed design of the turntable controls isagreed for each project.

Ventum-s slip rings

function:

turning centres with slip ring transmitters are availa-ble to transmit the power and information. internal drive modules require one slip ring turning centre to feed in the power. the slip ring is optional for exter-nal drive modules.

technical data:

5 Height: 166.6/200 mm5 inserted: in the Ø400 mm turning centre 5 Detailed confi guration for each project

# outer drive ! inner drive

! remote controls

# control panel with display

turntaBle driVe systems

turntable driVe SyStemS


7776

turntable driVe SyStemSProduct selection

external drive module - 1.5 kW

internal drive module 0.4/1.5 kW

item descriPtion

1 price and configuration on request.

item descriPtion

1 price and configuration on request.

Drive systems and controls are configured and assembled for each project.

turntaBle driVe systems


7978

sPecial aluminium structures

SPeCial aluminium StruCtureS expertise and ideas in aluminium.

Ventum-s stands for expertise in aluminium. We provide our customers with more than 20 years of experience as a professional aluminium welding company. We handle individual requirements and pay attention to all the details, ranging from develo-ping the idea to production.

Project development:

5 feasibility studies5 developing solutions with static tests

Project work:

5 complete design work in 3d5 Production

Project partnership:

We complete project teams with our expertise and precision in line with your requirements, if required.

our engineers are available to help you throughout the course of the project in a constructive manner and guarantee that deadlines are always met.

! cube designs for vehicles and people landesbühnen sachsen (theatre in radebeul)

! s-shaped curved ramp for the state operetta dresden

$ see-saw for use on stage at the görlitz-Zittau theatre


81

Plug-in feet PlatformSQuick. robust. effi cient.

the plug-in feet platforms guarantee low costs and they can be used in a variety of diff erent ways for simple stage construction work. the platforms are made available in two options in conjunction with mott mobile systeme gmbH & co. kg. it is crucial to know whether the platforms are going to be used in non-public or public areas. the Praktikus platform system is used for stages, while the dino platform system is used for spectator areas.

technical data for Praktikus:

5 area: 2.0 x 1.0 m5 structural height: 1.0 m(without diagonals)5 step height: 200 mm5 Plug-in feet dim.: 45x45 mm / 60x60 mm5 stacking height: 90 mm5 use: on stage

technical data for dino:

5 area: 2.0 x 1.0 m5 structural height: 2.0 m (without diagonals)5 step height: 200 mm5 Plug-in feet dim.: 60x60 mm5 stacking height 120 mm5 use: on stage and in public areas

! Praktikus platform with plug-in feet ! dino platform with plug-in feet

80

Plug-in feet Platforms


8382

Plug-in feet PlatformS Product selection

Praktikus platform system dino platform system

Plug-in feet 45x45 Plug-in feet 60x60

telescopic plug-in feet 45x45 telescopic plug-in feet 60x60

with 21 mm block board (varnished), other stage floors available on request

Without plug-in feet

with 25 mm wood core plywood (varnished), other stage floors available on request

Without plug-in feet


1 Praktikus platform 750 2.0x1.0 m al (untreated) 14.5 kg


1 dino platform 2.0x1.0 m al (untreated) 14.5 kg

item descriPtion HeigHt material WeigHt

1 Praktikus plug-in foot 0.2 m al (untreated) 0.2 kg







item descriPtion HeigHt material WeigHt

1 dino plug-in foot 0.2 m al (untreated) 0.4 kg







made of aluminium piping 45x45x2.5;

with a non-adjustable cap

(step height of 166 mm on request)

made of aluminium piping 45x45x2.5;

with a non-adjustable cap

(step height of 166 mm on request)

Various designs available Various designs available

item descriPtion


item descriPtion


Plug-in feet Platforms

Papiermühlengasse 12-14 · d · 01159 dresdentelefon: +49 351 4940359 · fax: +49 351 [email protected] · www.ventum-s.com

ventum-s products

Documents