venkatesan resume

3
RESUME Name: R. Venkatesan E-mail: [email protected] Contact No: +91 9489017281 OBJECTIVE A position in commercial diving industry where knowledge of engineering, a high mechanical aptitude, and unyielding commitment to safety can effectively contribute to the successful and profitable operation of the firm. CAREER SUMMARY A Mechanical Engineering Degree holder with 8 years of experience in inspection of Machined/Fabricated Boiler, piping, Oil and Gas components/Assemblies/Sub-Assemblies and General Engineering Components and completed CSWIP 3.1, NDT level 2. PROFESSIONAL QUALIFICATION Graduation : B.E., MECHANICAL ENGG. University/college : ANNA UNIVERSITY /TRICHY ENGG COLLEGE Year of pass : MAY 2007 Percentage : 70.4 % CERTIFICATIONS CSWIP 3.1 Welding inspector (CERT NO 89568 & Date of Expiry 26.12.2018) ASNT NDT Level II in PT, MT, UT, RT. Surface preparation and painting by TATA PROJECTS & QUALITY SERVICES. Certified internal quality auditor on ISO 9001:2008 organized by ZANDIG KNOWLEDGE MANAGEMENT PVT. LTD., India. EXPERIENCE Organization : Indian Institution of quality Assurance (IIQA), Iiqa Building, BHEL ancillary industrial Estate, Tiruchy - 14. Position : Inspection Engineer Period : From 21 st May 2008 to 31 st October 2016

Upload: venkatesan-r

Post on 18-Feb-2017

13 views

Category:

Documents


1 download

TRANSCRIPT

Page 1: venkatesan resume

RESUME

Name: R. Venkatesan

E-mail: [email protected]

Contact No: +91 9489017281

OBJECTIVE

A position in commercial diving industry where knowledge of engineering, a high mechanical aptitude, and unyielding commitment to safety can effectively contribute to the successful and profitable operation of the firm.

CAREER SUMMARY

A Mechanical Engineering Degree holder with 8 years of experience in inspection of Machined/Fabricated Boiler, piping, Oil and Gas components/Assemblies/Sub-Assemblies and General Engineering Components and completed CSWIP 3.1, NDT level 2. PROFESSIONAL QUALIFICATION Graduation : B.E., MECHANICAL ENGG. University/college : ANNA UNIVERSITY /TRICHY ENGG COLLEGE Year of pass : MAY 2007 Percentage : 70.4 %

CERTIFICATIONS

CSWIP 3.1 Welding inspector (CERT NO 89568 & Date of Expiry 26.12.2018)

ASNT NDT Level II in PT, MT, UT, RT.

Surface preparation and painting by TATA PROJECTS & QUALITY SERVICES.

Certified internal quality auditor on ISO 9001:2008 organized by ZANDIG KNOWLEDGE MANAGEMENT PVT. LTD., India.

EXPERIENCE Organization : Indian Institution of quality Assurance (IIQA), Iiqa Building, BHEL ancillary industrial Estate, Tiruchy - 14. Position : Inspection Engineer Period : From 21st May 2008 to 31st October 2016

Page 2: venkatesan resume

Organization Profile IIQA is a leading Third party Inspection agency and has major organization, like BHEL, TNPL, TWAD BOARD, NEPC, Thermax, KCP and ABS international pvt ltd.

RESPONSIBILITIES

Some Inspected components are pressure vessels, piping fabrication, Heater Exchanger, Drums, Headers, water wall panels, coils, modules, down comers, OFE, Structure’s, machined valves, Oil guns and Some structures are ceiling girder, columns, bracing assembly, monorail assembly, buckstay assembly, wind box assembly, duct assembly…

Inspection of components from raw material to finished products with stages. Inspecting the components with reference to the Inspection Test Plan. To ensuring available documents related to the products such as Customer quality plan,

Quality procedure, WPS, PQR, and WQR. Witness of WPS, PQR, WQT according to the AWS D1.1, ASME SEC IX. Inspecting components with reference to the codes and standards like AWS D1.1, ASME

SEC IX, VIII,V and customer requirements pertaining to the projects Evaluating the soundness of welds using NDT Techniques like RT, UT, PT, MT witness and

witness of PWHT, Hydro test… Shot blasting, sand blasting process and painting inspection and monitoring atmospheric

conditions. Inspection, performance testing and also conducting surveillance audit in engineering

industry. Analyzing Root cause of site complaints and attending the complaints also coordinating the

customer to satisfaction.

SPECIAL PROJECTS

On behalf of M/s. FIVE CAIL-KCP, Chennai, Inspection of Boiler Components at M/s.GB Engineering Enterprises Pvt. Ltd., Trichy-15 , M/s VEESONS Energy System private ltd., trichy-15 Tamilnadu.

Inspection of cathedic protection on ONGC pipeline on behalf of M/s ABS industrial verification (India) private ltd., Bangalore

Inspection of heavy engg., L&T –RRUVNL,MALWA,TANDA structural components on behalf of M/s ABS industrial verification (India) private ltd., at Raigarh, Chattisgarh .

Inspection of structures on behalf of M/s ISGEC Heavy Engg ltd. Inspection of conveyers, pulleys, rollers structural components for ThyssenKrupp

industries India pvt. Ltd., at ANSALDOCALDAIE-GB ENGG PVT. LTD. AREA OF STRENGTH

Familiar with welding process such as SMAW, SAW, GTAW, GMAW, FCAW. Experiences in using NDT Techniques and Radiographic film interpretation.

Knowledge in using various codes & standards.

Good initiative and leadership quality skills.

Page 3: venkatesan resume

PERSONAL PROFILE

Father’s Name : Mr. M. Rajendran

Date of Birth : 08.08.1985

Gender : Male

Marital Status : Married

Languages Known : English, Tamil.

Nationality : Indian

Permanent address : No-17, Anna Street, West ambikapuram,

Ponmalai (po) , Trichy-620004.

Passport no & Expiry date : G5787479 & 23.10.2017

Driving licence no & Expiry date : TN45 20070028719 & 27.09.2027

DECLARATION

I hereby declare that the above information and facts stated above are true

And Correct to the Best of my knowledge and belief.

PLACE : Trichy R.Venkatesan