vector data sheets - depco pump · pdf filewanner engineering, inc. 1204 chestnut avenue,...

Wanner Engineering, Inc.1204 Chestnut Avenue, Minneapolis, MN 55403 USA(612) 332-5681 FAX (612) 332-6937

Toll Free FAX (USA only) (800) 332-6812Email: [email protected] Website: www.wannereng.comDocument Fax Back System: (510) 745-0440

PERISTALTIC PUMPSS E R I E S

MODEL 2002Industries Served by VectorSeries Pumps• Waste water and water treatment• Chemical processing• Petrochemicals• Pulp and paper• Ceramics• Mining• Paints and coatings• Dairy processing• Pharmaceuticals• Cosmetics

Features• Dry pump cavity• Self-priming operation• Runs dry without damage• Complete isolation of pumped fluid• Heavy-duty roller bearings• Wide range of pump configurations/flows• No cups, packing or seals• Low maintenance• Reversible flow

Materials of ConstructionNon-Wetted Parts

Casing: aluminum alloyRotor: aluminum alloyRollers: plastic/alloy

Wetted PartsHose: EXTRUDED– Neoprene, Hypalon, Varprene, Silicone, PharMed®

BRAIDED– Natural rubber

Inlet/Outlet Connections: Teflon, brass orstainless steel hose barb, brass NPT, andstainless steel sanitary tri-clamp

0.23(5.8)

0.8(20)

0.2(5)

0.3(8)

5.4 (137)

5.9 (150)

7.6 (193)

6.1 (155)

6.7 (170)

7.4 (188)

1.6(41)

4.1(104) 7.5

(191)

3.7(94)

See Ordering Information for motor and gearbox sizes

Dimensionsinches (mm)



S E R I E S

Ordering Information

A complete Vector pump order number uses a 9 character order code to identifythe desired hose, fittings and drive. Select the appropriate items from the chartbelow and use the order code from each group to complete the pump assemblyorder number.

21

02

03

24 5 6 7 8 9

- - -

Order OrderDigit Code Description

1-4 Pump Designation2002 Model 2002 Shaft Drive Pump

5-6 Hose Material/TypePE Neoprene, extrudedVE Varprene, extrudedHE Hypalon, extrudedSE Silicone, extrudedFE PharMed1, extrudedNF Natural Rubber, fiber-braided

7-8 Connector Material/StyleAA Teflon, 1/2” hose barbCC 316 SST, Sanitary, 3/4” tri-clampFF Brass, 3/8” hose barbGG Brass, 3/8” male NPTSS 316 SST, 3/8” hose barb

9 DriveFlow Gear Pump MaxGPM Ratio RPM PSI

Single Phase, 1/4 HP TEFC, 115-230 VAC, 60 HzA 0.13 60:1 30 17.5B 0.19 40:1 44 14.5C 0.25 30:1 58 14.5D 0.40 20:1 88 14.5E 0.51 15:1 117 14.5

Three Phase, 1/4 HP TEFC, 230-460 VAC, 60 HzF 0.13 60:1 30 17.5G 0.19 40:1 44 14.5H 0.25 30:1 58 14.5I 0.40 20:1 88 14.5J 0.51 15:1 117 14.5

Model 2002

Fluid Characteristics

Viscosity 15,000 cps (max)

Liquid Temperature 180°F (82° C) (max)

Solid Size 1/16 inch (1.6 mm) (max)

Fiber Length 1/4 inch (6.3 mm) (max)

Specifications

Discharge Pressure 18 psi (1.2 bar) max

Suction Lift 7 ft (2.1 m)

Suction Pressure (max) 15 psi (1 bar)

Horsepower (max)1 1/4

Weight 6.5 lbs (3 kg)1 Pumps are shaft driven and require a gearbox and motor. See OrderingInformation for details.

0.50

0.375

0.25

0.125

1601401201008060402000

Revolutions Per Minute

Gal

lons

Per

Min

ute

0.25

0.16 Horsepow

er

(0-18 PSI)

Continuous Duty

1 Meets FDA and NSP for food handling. Maximum pressure: 13.5 psi.

V2002-991-2000 Rev. A 10/15/02 Printed in U.S.A.








Wetted PartsHose: EXTRUDED– Neoprene, Hypalon, Varprene, Silicone, PharMed®

BRAIDED– Natural rubber

Inlet/Outlet Connections: Teflon, brass orstainless steel hose barb, brass NPT, andstainless steel sanitary tri-clamp

0.23(5.8)

0.8(20)

0.2(5)

0.3(8)

6.2 (158)

6.7 (170)

8.5 (216)

6.1 (155)

6.7 (170)

7.7 (196)

1.9(48)

5.2(132) 8.0

(203)

4.5(114)





S E R I E S Model 2003



21

02

03

34 5 6 7 8 9

- - -



5-6 Hose Material/TypePE Neoprene, extrudedVE Varprene, extrudedHE Hypalon, extrudedSE Silicone, extrudedFE PharMed1, extrudedNF Natural Rubber, fiber-braided

7-8 Connector Material/StyleAA Teflon, 3/4” hose barbCC 316 SST, Sanitary, 3/4” tri-clampFF Brass, 1/2” hose barbGG Brass, 1/2” male NPTSS 316 SST, 1/2” hose barb


Single Phase, 1/4 HP TEFC, 115-230 VAC, 60 HzA 0.33 60:1 30 17.5B 0.48 40:1 44 17.5C 0.64 30:1 58 14.5D 0.97 20:1 88 14.5E 1.28 15:1 117 14.5

Three Phase, 1/4 HP TEFC, 230-460 VAC, 60 HzF 0.33 60:1 30 17.5G 0.48 40:1 44 17.5H 0.64 30:1 58 14.5I 0.97 20:1 88 14.5J 1.28 15:1 117 14.5






Specifications



Suction Pressure (max) 15 psi (1 bar)


Weight 10 lbs (4.5 kg)1 Pumps are shaft driven and require a gearbox and motor. See OrderingInformation for details.

1.50

1.25

1.0

0.75

0.50

0.25

1601401201008060402000


Gal

lons

Per

Min

ute

0.25

0.16 Horsepow

er

(0-18 PSI)

Continuous Duty

1 Meets FDA and NSP for food handling. Maximum pressure: 13.5 psi.









Wetted PartsHose: EXTRUDED– Neoprene, Hypalon, Varprene, Silicone

BRAIDED– EPDM, Natural rubber

Inlet/Outlet Connections: Teflon orstainless steel hose barb, stainless steelor carbon steel ANSI flange, brass orcarbon seetl NPT, and stainless steelsanitary tri-clamp

0.23(5.8)

1.4(36)

0.3(8)

0.4(10)

8.7 (221)

9.3 (236)

12.2 (305)

7.1 (180)

7.9 (201)

9.3 (236)

2.6(66)

7.5(191) 11.6

(295)

6.3(160)

0.2 (5)








21

02

03

44 5 6 7 8 9

- - -



5-6 Hose Material/TypePE Neoprene, extrudedVE Varprene, extrudedHE Hypalon, extrudedSE Silicone, extrudedEF EPDM, fiber-braidedNF Natural Rubber, fiber-braided

7-8 Connector Material/StyleAA Teflon, 1” hose barbBB 316 SST, 3/4” ANSI flangeCC 316 SST, Sanitary, 1” tri-clampDD Carbon Steel, 3/4” ANSI flangeEE Carbon Steel, 3/4” male NPTGG Brass, 3/4” male NPTSS 316 SST, 3/4” hose barb


Single Phase, 1/4 HP TEFC, 115-230 VAC, 60 HzA 0.86 60:1 30 22B 1.43 35:1 50 22D 2.52 20:1 88 18

Single Phase, 1/3 HP TEFC, 115-230 VAC, 60 HzE 3.56 14:1 125 14.5

Three Phase, 1/4 HP TEFC, 230-460 VAC, 60 HzF 0.86 60:1 30 22G 1.43 35:1 50 22I 2.52 20:1 88 18

Three Phase, 1/3 HP TEFC, 230-460 VAC, 60 HzJ 3.56 14:1 125 14.5






Specifications



Suction Pressure (max) 18 psi (1.2 bar)


Weight 20 lbs (9 kg)1 Pumps are shaft driven and require a gearbox and motor. See OrderingInformation for details.

0.25

4.0

3.0

2.0

1.0

1601401201008060402000


Gal

lons

Per

Min

ute

0.33

Horsepow

er

(0-22 PSI)

Continuous Duty










BRAIDED– EPDM, Hypalon, Nitrilerubber, Natural rubber (regular andheavy duty)

Inlet/Outlet Connections: Teflon orstainless steel hose barb, stainless steelor carbon steel ANSI flange,Teflon NPT,and stainless steel sanitary tri-clamp

0.43 (10.8)

10.1(257)

3.6(91)

1.6(41)

0.6(15)

1.3(33)

8.6(218)

0.8(20)

16.2(411)

9.4 (239)

10.8 (274)

17.4 (442)

15.7 (399)

17.3 (439)

19.0 (483)







21

02

03

54 5 6 7 8 9

- - -



5-6 Hose Material/TypePE Neoprene, extrudedVE Varprene, extrudedHE Hypalon, extrudedSE Silicone, extrudedBF Nitrile Rubber, fiber-braidedEF EPDM, fiber-braidedHF Hypalon, fiber-braidedNF Natural Rubber, fiber-braidedMF Natural Rubber, fiber-braided (heavy duty)

7-8 Connector Material/StyleAA Teflon, 1-1/4” hose barbBB 316 SST, 1” ANSI flangeCC 316 SST, Sanitary, 1-1/2” tri-clampDD Carbon Steel, 1” ANSI flangeHH Teflon, 1” male NPTSS 316 SST, 1” hose barb


Three Phase, 1/2 HP TEFC, 230-460 VAC, 60 HzA 2.5 56:1 30 37B 3.8 37:1 46 37

Three Phase, 3/4 HP TEFC, 230-460 VAC, 60 HzC 5.9 24:1 70 29

Three Phase, 1 HP TEFC, 230-460 VAC, 60 HzD 7.9 18:1 94 29






Specifications


Suction Lift 16.5 ft (5.0 m)




0.5

12.0

9.0

6.0

3.0

1601401201008060402000


Gal

lons

Per

Min

ute

0.75

Horsepow

er

(0-37 PSI)

Continuous Duty










BRAIDED– Hypalon, Nitrile rubber,Natural rubber (regular and heavy duty)

Inlet/Outlet Connections: Teflon orstainless steel hose barb, stainless steelor carbon steel ANSI flange, Teflon NPT,and stainless steel sanitary tri-clamp

0.55 (14.0)

14.3(363)

5.8(147)

2.2(56)

1.0(25)

1.4(33)

13.0(330)

1.0(25)

21.9(556)

13.0 (330)

16.0 (406)

22.5 (572)

21.7 (551)

23.6 (599)

25.8 (655)







21

02

03

64 5 6 7 8 9

- - -



5-6 Hose Material/TypePE Neoprene, extrudedVE Varprene, extrudedHE Hypalon, extrudedSE Silicone, extrudedBF Nitrile Rubber, fiber-braidedHF Hypalon, fiber-braidedNF Natural Rubber, fiber-braidedMF Natural Rubber, fiber-braided (heavy duty)

7-8 Connector Material/StyleAA Teflon, 1-1/4” hose barbBB 316 SST, 1-1/4” ANSI flangeCC 316 SST, Sanitary, 1-1/2” tri-clampDD Carbon Steel, 1-1/4” ANSI flangeHH Teflon, 1-1/4” male NPTSS 316 SST, 1-1/4” hose barb


Three Phase, 1-1/2 HP TEFC, 230-460 VAC, 60 HzA 7.2 43:1 40 60

Three Phase, 2 HP TEFC, 230-460 VAC, 60 HzB 10.3 30:1 57 45C 14.1 22:1 78 45D 18.5 17:1 102 29






Specifications




Horsepower (max)1 2


1.5

20.0

15.0

10.0

5.0

1601401201008060402000


Gal

lons

Per

Min

ute

2.0

Horsepow

er

(0-60 PSI)

Continuous Duty

V2006V2002-991-2000 Rev. A 10/15/02 Printed in U.S.A.








Wetted PartsHose: EXTRUDED– Varprene

BRAIDED– Hypalon, Nitrile rubber,Natural rubber (regular and heavy duty)

Inlet/Outlet Connections: Teflon orstainless steel hose barb, stainless steelor carbon steel ANSI flange, Teflon NPT,and stainless steel sanitary tri-clamp 0.55 (14.0)

18.0(457)

6.2(157)

2.8(71)

1.0(25)

3.8(97)

15.2(386)

1.0(25)

26.5(673)

16.5 (419)

18.5 (470)

28.6 (726)

25.6 (650)

27.6 (701)

30.8 (782)







21

02

03

74 5 6 7 8 9

- - -



5-6 Hose Material/TypeVE Varprene, extrudedBF Nitrile Rubber, fiber-braidedHF Hypalon, fiber-braidedNF Natural Rubber, fiber-braidedMF Natural Rubber, fiber-braided (heavy duty)

7-8 Connector Material/StyleAA Teflon, 2” hose barbBB 316 SST, 2” ANSI flangeCC 316 SST, Sanitary, 2” tri-clampDD Carbon Steel, 2” ANSI flangeHH Teflon, 2” male NPTSS 316 SST, 2-1/4” hose barb


Three Phase, 2 HP TEFC, 230-460 VAC, 60 HzA 15.3 58:1 30 60B 20.4 43:1 40 60C 25.8 33:1 51 50

Three Phase, 3 HP TEFC, 230-460 VAC, 60 HzD 40.5 21:1 80 38






Specifications




Horsepower (max)1 3


2.0

50.0

37.5

25.0

12.5

1601401201008060402000


Gal

lons

Per

Min

ute

3.0(0-60 PSI)

Horsepow

er

Continuous Duty


vector data sheets - depco pump · pdf filewanner engineering, inc. 1204 chestnut avenue,...

Documents