vauxhall crossland x owner's manual...pull handle, slide seat, release handle. try to move the...

Vauxhall Crossland XOwner's Manual

Introduction .................................... 2In brief ............................................ 6Keys, doors and windows ............ 21Seats, restraints ........................... 42Storage ........................................ 63Instruments and controls ............. 72Lighting ...................................... 106Climate control ........................... 114Driving and operating ................. 126Vehicle care ............................... 174Service and maintenance .......... 213Technical data ........................... 217Customer information ................ 230Index .......................................... 238

Contents

2 Introduction

Introduction

Introduction 3

Vehicle specific dataPlease enter your vehicle's data onthe previous page to keep it easilyaccessible. This information isavailable in the sections "Service andmaintenance" and "Technical data"as well as on the identification plate.

IntroductionYour vehicle is a designedcombination of advanced technology,safety, environmental friendlinessand economy.This Owner's Manual provides youwith all the necessary information toenable you to drive your vehiclesafely and efficiently.Make sure your passengers areaware of the possible risk of accidentand injury which may result fromimproper use of the vehicle.You must always comply with thespecific laws and regulations of thecountry that you are in. These lawsmay differ from the information in thisOwner's Manual.Disregarding the description given inthis manual may affect your warranty.

When this Owner's Manual refers to aworkshop visit, we recommend yourVauxhall Authorised Repairer. Forgas vehicles, we recommend aVauxhall Authorised Repairerlicensed to service gas vehicles.All Vauxhall Authorised Repairersprovide first-class service atreasonable prices. Experiencedmechanics trained by Vauxhall workaccording to specific Vauxhallinstructions.The customer literature pack shouldalways be kept ready to hand in thevehicle.

Using this manual● This manual describes all options

and features available for thismodel. Certain descriptions,including those for display andmenu functions, may not apply toyour vehicle due to modelvariant, country specifications,special equipment oraccessories.

● The "In brief" section will give youan initial overview.

● The table of contents at thebeginning of this manual andwithin each section shows wherethe information is located.

● The index will enable you tosearch for specific information.

● This Owner's Manual depicts left-hand drive vehicles. Operation issimilar for right-hand drivevehicles.

● The Owner's Manual uses theengine identifier code. Thecorresponding sales designationand engineering code can befound in the section "Technicaldata".

● Directional data, e.g. left or right,or front or back, always relate tothe direction of travel.

● Displays may not support yourspecific language.

● Display messages and interiorlabelling are written in boldletters.

4 Introduction

Danger, Warnings andCautions

9 Danger

Text marked 9 Danger providesinformation on risk of fatal injury.Disregarding this information mayendanger life.

9 Warning

Text marked 9 Warning providesinformation on risk of accident orinjury. Disregarding thisinformation may lead to injury.

Caution

Text marked Caution providesinformation on possible damage tothe vehicle. Disregarding thisinformation may lead to vehicledamage.

SymbolsPage references are indicated with 3.3 means "see page".Chronological order to select menuentries in the vehicle personalisationis indicated with I.Page references and index entriesrefer to the indented headings givenin the section table of content.Thank you for choosing a Vauxhall.We wish you many hours ofpleasurable driving.Your Vauxhall Team

Introduction 5

6 In brief

In brief

Initial drive information

Vehicle unlocking

Press c to unlock the doors and loadcompartment. Open the doors bypulling the handles.Press P to unlock the tailgate only.

Tailgate

After unlocking, press the touchpadswitch above the licence plate andopen the tailgate.Radio remote control 3 22.Central locking system 3 24.Electronic key system 3 23.Load compartment 3 30.

In brief 7

Seat adjustmentLongitudinal adjustment

Pull handle, slide seat, releasehandle. Try to move the seat back andforth to ensure that the seat is lockedin place.Seat position 3 43.Seat adjustment 3 44.

Backrests inclination

Turn handwheel. Do not lean onbackrest when adjusting.Seat position 3 43.Seat adjustment 3 44.

Seat height

Lever pumping motionup : seat higherdown : seat lower

Seat position 3 43.Seat adjustment 3 44.

8 In brief

Seat inclination

Press switchtop : front end higherbottom : front end lower

Seat position 3 43.Seat adjustment 3 44.

Head restraint adjustment

Press release button, adjust height,engage.Head restraints 3 42.

Seat belt

Pull out the seat belt and fasten in beltbuckle. The seat belt must not betwisted and must fit close against thebody. The backrest must not be tiltedback too far (maximum approx. 25°).To unfasten belt, press red button onbelt buckle.Seat position 3 43.Seat belts 3 48.Airbag system 3 51.

In brief 9

Mirror adjustmentInterior mirror

To adjust the mirror, move the mirrorhousing in the desired direction.Manual anti-dazzle interior mirror3 36.Automatic anti-dazzle interior mirror3 36.

Exterior mirrors

Select the relevant exterior mirror bypushing the mirror button to the left orright. Adjust respective mirror by thefour-way control.Convex mirrors 3 34.Electric adjustment 3 34.Folding mirrors 3 35.Heated mirrors 3 35.

Steering wheel adjustment

Unlock lever, adjust steering wheel,then engage lever and ensure it isfully locked. Do not adjust steeringwheel unless vehicle is stationary andsteering wheel lock has beenreleased.Seat position 3 43.Ignition positions 3 127.

10 In brief

Instrument panel overview

In brief 11

1 Power windows ..................... 372 Exterior mirrors ..................... 343 Cruise control ..................... 146

Speed limiter ....................... 1484 Turn and lane-change

signals, headlight flash,low/high beam, high beamassist ................................... 110

Exit lighting ......................... 113

Parking lights ...................... 111

Buttons for DriverInformation Centre ................ 92

5 Side air vents ...................... 1236 Instruments .......................... 82

Driver Information Centre ...... 927 Buttons for Driver

Information Centre ................ 928 Windscreen wiper and

washer, rear wiper andwasher ................................. 74

9 Head-up display .................... 9610 Centre air vents .................. 12311 Hazard warning flashers .... 10912 Info-Display .......................... 94

13 Centre air vent ...................... 9414 Light sensor 15 Central locking system .......... 2416 Glovebox .............................. 63

Fuse box ............................ 19217 Controls for Info-Display

operation ............................... 9418 Climate control system ........ 11519 USB charging port ................ 7720 Parking assist/Advanced

parking assist ..................... 150

Lane departure warning ..... 164

Eco button for stop-startsystem ................................. 131

Electronic Stability Controland Traction Control .......... 145

21 Power outlet .......................... 7722 Manual transmission .......... 142

Automatic transmission ...... 13923 Manual parking brake ......... 14424 Power button ....................... 12825 Ignition switch ..................... 12726 Steering wheel adjustment . . 73

27 Horn ..................................... 7428 Bonnet release lever .......... 17629 Storage ................................. 6330 Head-up display .................... 9631 Light switch ........................ 106

Headlight rangeadjustment ......................... 108

Front/rear fog lights ............ 110

Instrument illumination ....... 111

12 In brief

Exterior lighting

AUTO : automatic light controlswitches automaticallybetween daytime runninglight and headlight

8 : sidelights9 : headlights

Automatic light control 3 107.

Fog lightsPress button in light switch:> : front fog lights

ø : rear fog light

Headlight flash, high beam andlow beam

headlight flash : pull leverhigh beam : push leverlow beam : push or pull lever

High beam 3 107.High beam assist 3 108Headlight flash 3 107.Adaptive forward lighting 3 108

Turn and lane-change signals

lever up : right turn signallever down : left turn signal

Turn and lane-change signals3 110.Parking lights 3 111.

In brief 13

Hazard warning flashers

Operated by pressing ¨.Hazard warning flashers 3 109.

Horn

Press j.

Washer and wiper systemsWindscreen wiper

HI : fastLO : slowINT : interval wiping

orAUTO : automatic wiping with rain

sensorOFF : off

For single wipe when the wiper is off,press lever down to position 1x.Windscreen wiper 3 74.

14 In brief

Windscreen washer

Pull lever.Windscreen washer system 3 74.Washer fluid 3 178.Wiper blade replacement 3 181.

Rear window wiper

Turn outer cap to activate the rearwindow wiper:OFF : offINT : intermittent operationON : continuous operation

Rear window washer

Push lever.Washer fluid is sprayed on the rearwindow and the wiper wipes a fewtimes.Rear window wiper/washer 3 76.

In brief 15

Climate controlHeated rear windowHeating and ventilation system, airconditioning system

The heating is operated by pressingb.

Electronic climate control system

The heating is operated by pressingb.Heated rear window 3 38.

Heated exterior mirrorsPressing b also activates the heatedexterior mirrors.Heated exterior mirrors 3 35.

Demisting and defrosting thewindows

Heating and ventilation system, airconditioning system

● Press á: the air distribution isdirected towards the windscreen.

● Set fan speed Z to highest level.● Air conditioning system: switch

on air conditioning A/C, ifrequired.

● Set temperature control towarmest level.

● Switch on heated rear window b.

16 In brief

● Switch on heatedwindscreen ,.

● Open side air vents as requiredand direct them towards the doorwindows.

Heating and ventilation system3 114.Air conditioning system 3 115.Heated windscreen 3 39.

Electronic climate control system

Press à.Temperature and air distribution areset automatically and the fan runs athigh speed.Switch on air conditioning by pressingA/C, if required.Switch on heated rear windowb.Switch on heated windscreen ,.Electronic climate control system3 118.

TransmissionManual transmission

To engage reverse on 5-speedtransmission, depress the clutchpedal and then push and move theselector lever to the right and rear.

In brief 17

To engage reverse on 6-speedtransmission, depress the clutchpedal, pull the ring under the selectorlever and move the selector lever tothe left and front.Manual transmission 3 142.

Automatic transmission

P : park positionR : reverseN : neutral modeD : automatic modeM : manual mode< : upshift] : downshift

Automatic transmission 3 139.

Starting offCheck before starting off● tyre pressure and condition

3 195, 3 228● Engine oil level and fluid levels

3 177.● All windows, mirrors, exterior

lighting and number plates arefree from dirt, snow and ice andare operational.

● Proper position of mirrors, seats,and seat belts 3 34, 3 43,3 49.

● Brake function at low speed,particularly if the brakes are wet.

18 In brief

Starting the engine

Ignition switch

● Turn key to position 2.● Move the steering wheel slightly

to release the steering wheellock.

● Manual transmission: operateclutch and brake pedal.Automatic transmission: operatebrake pedal and move selectorlever to P or N.

● Do not operate accelerator pedal.● Turn key to position 2 and

release after engine has beenstarted.

Diesel engine starts after controlindicator ! for preheatingextinguishes.

Starting the engine 3 130.

Start power button

Manual transmission: operate clutchand brake pedal.Automatic transmission: operatebrake pedal and move selector leverto P or N.Do not operate accelerator pedal.Press and release Start/Stop button.Diesel engine starts after controlindicator ! for preheatingextinguishes.

In brief 19

Stop-start system

If the vehicle is at a low speed or at astandstill and certain conditions arefulfilled, an Autostop is activated.An Autostop is indicated by controlindicator D.Manual transmission: to restart theengine, depress the clutch pedalagain. Control indicator Dextinguishes.Automatic transmission: to restart theengine, release the brake pedal.Control indicator D extinguishes.Stop-start system 3 131.

Parking

9 Warning

● Do not park the vehicle on aneasily ignitable surface. Thehigh temperature of theexhaust system could ignite thesurface.

● Always apply the parkingbrake. Activate the manualparking brake without pressingthe release button. Apply asfirmly as possible on a downhillslope or uphill slope. Depressbrake pedal at the same time toreduce operating force.

● Switch off the engine.● If the vehicle is on a level

surface or uphill slope, engagefirst gear or set the selectorlever to position P beforeremoving the ignition key orswitching off ignition onvehicles with power button. Onan uphill slope, turn the frontwheels away from the kerb.

If the vehicle is on a downhillslope, engage reverse gear orset the selector lever to positionP before removing the ignitionkey or switching off ignition onvehicles with power button.Turn the front wheels towardsthe kerb.

● Close the windows.● Remove the ignition key from

the ignition switch or switch offignition on vehicles with powerbutton. Turn the steering wheeluntil the steering wheel lock isfelt to engage.

● Lock the vehicle with e on theradio remote control.Activate the anti-theft alarmsystem 3 32.

● The engine cooling fans may runafter the engine has beenswitched off 3 176.

20 In brief

Caution

After running at high enginespeeds or with high engine loads,operate the engine briefly at a lowload or run in neutral forapprox. 30 seconds beforeswitching off, in order to protectthe turbocharger.

Keys, locks 3 21, Laying-up thevehicle for a long period of time3 175.

Keys, doors and windows 21

Keys, doors andwindows

Keys, locks ................................... 21Keys .......................................... 21Radio remote control ................. 22Electronic key system ................ 23Central locking system .............. 24Automatic locking ...................... 28Child locks ................................. 29

Doors ........................................... 30Load compartment .................... 30

Vehicle security ............................ 31Anti-theft locking system ........... 31Anti-theft alarm system .............. 32Immobiliser ................................ 34

Exterior mirrors ............................ 34Convex shape ........................... 34Electric adjustment .................... 34Folding mirrors .......................... 35Heated mirrors ........................... 35

Interior mirrors ............................. 36Manual anti-dazzle .................... 36Automatic anti-dazzle ................ 36

Windows ...................................... 36Windscreen ............................... 36

Power windows ......................... 37Heated rear window .................. 38Heated windscreen .................... 39Sun visors .................................. 40

Roof ............................................. 40Glass panel ............................... 40

Keys, locksKeys

Caution

Do not attach heavy or bulky itemsto the ignition key.

Replacement keysThe key number is specified on adetachable tag.The key number must be quotedwhen ordering replacement keys as itis a component of the immobilisersystem.Locks 3 209.Central locking 3 24.Starting the engine 3 130.Radio remote control 3 22.Electronic key 3 23.The code number of the adapter forthe locking wheel nuts is specified ona card. It must be quoted whenordering a replacement adapter.Wheel changing 3 202.

22 Keys, doors and windows

Key with foldaway key section

Press button to extend. To fold thekey, first press the button.

Lock cylindersDesigned to free-wheel if they areforcefully rotated without the correctkey or if the correct key is not fullyinserted. To reset, turn cylinder withthe correct key until its slot is vertical,remove key then re-insert it. If thecylinder still free-wheels, turn the keythrough 180° and repeat operation.

Radio remote control

Enables operation of the followingfunctions via the use of the remotecontrol buttons:● central locking system 3 24● anti-theft locking system 3 31● anti-theft alarm system 3 32● tailgate unlocking 3 24● power windows 3 37● mirrors folding

The remote control has a range of upto 100 metres, but may also be muchless due to external influences. Thehazard warning flashers confirmoperation.Handle with care, protect frommoisture and high temperatures andavoid unnecessary operation.

Replacing battery in radio remotecontrolReplace the battery as soon as therange reduces.

Batteries do not belong in householdwaste. They must be disposed of atan appropriate recycling collectionpoint.


1. Unclip the cover using ascrewdriver in the cutout.

2. Remove the cover.3. Extract the flat battery from its

location.4. Replace battery. Use CR 1620 or

equivalent battery. Pay attentionto the installation position.

5. Clip the cover in place.

FaultIf the central locking system cannotbe operated with the radio remotecontrol, the cause may be one of thefollowing:● Fault in radio remote control.● The range is exceeded.● The battery voltage is too low.● Frequent, repeated operation of

the radio remote control while notin range, which will require re-synchronisation.

● Overload of the central lockingsystem by operating at frequentintervals, the power supply isinterrupted for a short time.

● Interference from higher-powerradio waves from other sources.

Manual unlocking 3 24.

Electronic key system

Enables a keyless operation of thefollowing functions:● central locking system 3 24● ignition switching on and starting

the engine 3 130The electronic key simply needs to beon the driver's person.Additionally, the electronic keyincludes the functionality of the radioremote control 3 22.Handle with care, protect frommoisture and high temperatures andavoid unnecessary operation.


Replacing battery in electronickeyReplace the battery as soon as thesystem no longer operates properlyor the range is reduced. The need forbattery replacement is indicated by amessage in the Driver InformationCentre 3 97.

Batteries do not belong in householdwaste. They must be disposed of atan appropriate recycling collectionpoint.

1. Unclip the cover using ascrewdriver in the cutout.

2. Remove the cover.3. Extract the flat battery from its

location.4. Replace battery. Use CR 2032 or

equivalent battery. Pay attentionto the installation position.

5. Clip the cover in place.

FaultIf the central locking cannot beoperated or the engine cannot bestarted, the cause may be one of thefollowing:● Fault in electronic key.● Electronic key is out of reception

range.● The battery voltage is too low.● Overload of the central locking

system by operating at frequentintervals, the power supply isinterrupted for a short time.

● Interference from higher-powerradio waves from other sources.

To rectify the cause of the fault,change the position of the electronickey.Manual unlocking 3 24.

Central locking systemUnlocks and locks doors, loadcompartment and fuel filler flap.Pull an interior door handle fully tounlock and open the respective door.


NoticeIn the event of an accident in whichairbags or belt pretensioners aredeployed, the vehicle isautomatically unlocked.NoticeA short time after unlocking with theremote control the doors are lockedautomatically if no door has beenopened.

Remote control operation

Unlocking

Press O.

Unlocking mode can be set in thevehicle personalisation menu in theInfo-Display. Two settings areselectable:● All doors, load compartment and

fuel filler flap will be unlocked bypressing O once.

● Only the driver's door and fuelfiller flap will be unlocked bypressing O once. To unlock alldoors and load compartment,press O twice.

Select the relevant setting in theVehicle personalisation.Vehicle personalisation 3 99.

Unlocking the tailgatePress P longer to unlock thetailgate only.Unlocking and opening the tailgate3 30.

LockingClose doors, load compartment andfuel filler flap.

Press N.If a door is not closed properly, thecentral locking system will not work.

ConfirmationOperation of the central lockingsystem is confirmed by the hazardwarning flashers.


Electronic key system operation

The electronic key must be outsidethe vehicle, within a range of approx.one metre of the relevant door side.

Unlocking

Pass your hand behind any doorhandle to unlock the vehicle or pressthe tailgate touchpad.Unlocking mode can be set in thevehicle personalisation. Threesettings are selectable:● Only the driver's door will be

unlocked by passing your handbehind the driver's door handle.

● All doors, load compartment andfuel filler flap will be unlocked bypassing your hand behind any ofthe door handles or by pressingthe tailgate touchpad.

● Only the tailgate will be unlockedby pressing the tailgatetouchpad.

Vehicle personalisation 3 99

Locking

Press with a finger or thumb on oneof the door handles (at the markings)or press the tailgate touchpad.All doors, load compartment and fuelfiller flap will be locked.


The system locks if any door hasbeen opened and all doors are nowclosed.If the driver's door is not closedproperly, the electronic key remains inthe vehicle or the ignition is not off,locking will not be permitted and awarning chime sounds.If there have been two or moreelectronic keys in the vehicle and theignition was on once, the doors will belocked even if just one electronic keyis taken out of the vehicle.

Unlocking and opening the tailgateThe tailgate can be unlocked andopened by pushing the touchpadunder the tailgate moulding when theelectronic key is in range. The doorsremain locked depending on theconfiguration in the vehiclepersonalisation.Load compartment 3 30Vehicle personalisation 3 99

Operation with buttons on theelectronic key

The central locking system can alsobe operated with the buttons on theelectronic key.Press O to unlock the driver's doorand the fuel filler flap or all doors, thefuel filler flap and the tailgate.Press N to lock the driver's door andthe fuel filler flap or all doors, the fuelfiller flap and the tailgate.Press P longer to unlock and openonly the tailgate or all doors, the fuelfiller flap and the tailgate.Remote control operation 3 24.

ConfirmationOperation of central locking system isconfirmed by the hazard warningflashers.

Central locking buttonsLocks or unlocks all doors, the loadcompartment and fuel filler flap fromthe passenger compartment via aswitch.

Press Q to lock. The LED in the buttonilluminates.Press Q again to unlock. The LED inthe button extinguishes.


Operation with the key in case ofa central locking system faultIn case of a fault, e.g. vehicle batteryor remote control/electronic keybattery is discharged, the driver'sdoor can be locked or unlocked withthe mechanical key.

Manual unlockingElectronic key: press and hold thelatch to extract the integral key.

Manually unlock the driver's door byinserting and turning the key in thelock cylinder.

The other doors can be opened bypulling the interior handle. The loadcompartment and fuel filler flap willpossibly not be unlocked.By switching on the ignition, the anti-theft locking system is deactivated.

Manual locking

Manually lock the driver's door byinserting and turning the key in thelock cylinder.

To lock the other doors, first removethe black cover by inserting a key andturning clockwise.Insert key into the recess and movelatch sideways.Remove key and attach the blackcover.The fuel filler flap and tailgate arepossibly not locked.

Automatic lockingAutomatic locking after driving offThis system allows automatic lockingof the doors as soon as the speed ofthe vehicle exceeds 10 km/h.


If one of the doors or the loadcompartment is open, the automaticcentral locking does not take place.This is signalled by the sound of thelocks rebounding, accompanied byillumination of h in the instrumentpanel, an audible signal and thedisplay of an alert message.

You can activate or deactivate thisfunction permanently. With theignition on, press Q until an audiblesignal starts and a correspondingmessage is displayed.The state of the system stays inmemory when switching off theignition.

Automatic relock after unlockingThis feature automatically locks alldoors, load compartment and fuelfiller flap a short time after unlockingwith the remote control or electronickey, provided no door has beenopened.

Child locks

9 Warning

Use the child locks wheneverchildren are occupying the rearseats.

Mechanical child locks

Turn the red child lock in the reardoors to the horizontal position byusing a key. The door cannot beopened from the inside.To deactivate, turn the child lock tothe vertical position.


Electric child locks

Remotely operated system to preventopening of the rear doors using theirinterior controls and use of the rearelectric windows.

Switching onPress Ô. The indicator lamp in thebutton comes on, accompanied by aconfirmation message. This indicatorlamp remains on until the child lock isswitched off.

Switching offPress Ô again. The indicator lamp onbutton goes off, accompanied by aconfirmation message. This indicatorlamp remains on while child lock isswitched on.

DoorsLoad compartmentTailgate

Opening

After unlocking, press the touchpadswitch above the licence plate andopen the tailgate.


Closing

Use the interior handle.Do not push the touchpad switchwhilst closing as this will unlock thetailgate again.Central locking system 3 24.

General hints for operatingtailgate

9 Danger

Do not drive with the tailgate openor ajar, e.g. when transportingbulky objects, since toxic exhaust

gases, which cannot be seen orsmelled, could enter the vehicle.This can cause unconsciousnessand even death.

Caution

Before opening the tailgate, checkoverhead obstructions, e.g. agarage door, to avoid damage tothe tailgate. Always check themoving area above and behind thetailgate.

NoticeThe installation of certain heavyaccessories onto the tailgate mayaffect its ability to remain open.NoticeAt low outside temperatures thetailgate may not open fully by itself.In this event, lift the tailgate manuallyto its normal end position.

Vehicle securityAnti-theft locking system

9 Warning

Do not use the system if there arepeople in the vehicle! The doorscannot be unlocked from theinside.

The system deadlocks all the doors.All doors must be closed otherwisethe system cannot be activated.Unlocking the vehicle disables themechanical anti-theft locking system.This is not possible with the centrallocking button.


Activating

Press N on the radio remote controltwice within five seconds.

Anti-theft alarm systemThe anti-theft alarm system iscombined with the central lockingsystem.It monitors:● doors, tailgate, bonnet● passenger compartment

including adjoining loadcompartment

● vehicle inclination, e.g. if it israised

● ignition

ActivationAll doors must be closed and theelectronic key of the electronic keysystem must not remain in thevehicle. Otherwise the system cannotbe activated.● Radio remote control: self-

activated 30 seconds afterlocking the vehicle by pressing eonce.

● Electronic key system: self-activated 30 seconds afterlocking the vehicle by pressingwith a finger or thumb on one ofthe front door handles at themarkings.

● Radio remote control orelectronic key: directly bypressing e twice withinfive seconds.

● Electronic key system withpassive locking enabled: brieflyactivated after passive lockingoccurs.

NoticeChanges to the vehicle interior suchas the use of seat covers and openwindows, could impair the functionof passenger compartmentmonitoring.


Activation without monitoring ofpassenger compartment andvehicle inclination

Switch off the monitoring ofpassenger compartment and vehicleinclination when animals are beingleft in the vehicle, because of highvolume ultrasonic signals ormovements triggering the alarm. Alsoswitch off when the vehicle is on aferry or train.1. Close tailgate, bonnet, windows.2. Press o. LED in the button o

illuminates for a maximum often minutes.

3. Close doors.4. Activate the anti-theft alarm

system.Status message is displayed in theDriver Information Centre.

IndicationLED in the central locking buttonflashes if the anti-theft alarm systemis activated.Seek the assistance of a workshop inthe event of faults.

DeactivationRadio remote control: Unlocking thevehicle by pressing c deactivates theanti-theft alarm system.

Electronic key system: Unlocking thevehicle by pressing on one of the frontdoor handles at the markingsdeactivates the anti-theft alarmsystem.The electronic key must be outsidethe vehicle, within a range of approx.one metre of the relevant door side.The system is not deactivated byunlocking the driver's door with thekey or with the central locking buttonin the passenger compartment.


AlarmWhen triggered, the alarm hornsounds and the hazard warning lightsflash simultaneously. The numberand duration of alarm signals arestipulated by legislation.The anti-theft alarm system can bedeactivated by pressing c, bypressing the switch on the doorhandle with electronic key system orswitching on the ignition.The anti-theft alarm system can bedeactivated by pressing c, bypressing on one of the front doorhandles at the markings withelectronic key system or switching onthe ignition.A triggered alarm, which has not beeninterrupted by the driver, will beindicated by the hazard warninglights. They will flash quickly threetimes the next time the vehicle isunlocked with the radio remotecontrol. Additionally a warningmessage is displayed in the DriverInformation Centre after switching onthe ignition.Vehicle messages 3 97.

If the vehicle's battery is to bedisconnected (e.g. for maintenancework), the alarm siren must bedeactivated as follows: switch theignition on then off, then disconnectthe vehicle's battery within15 seconds.

ImmobiliserThe system is part of the ignitionswitch and checks whether thevehicle is allowed to be started withthe key being used.The immobiliser is activatedautomatically after the key has beenremoved from the ignition switch.NoticeRadio Frequency Identification(RFID) tags may cause interferencewith the key. Do not have it placednear the key when starting thevehicle.NoticeThe immobiliser does not lock thedoors. You should always lock thevehicle after leaving it and switch onthe anti-theft alarm system 3 24,3 32.

Exterior mirrorsConvex shapeThe convex exterior mirror on thedriver's side contains an asphericalarea and reduces blind spots. Theshape of the mirror makes objectsappear smaller, which will affect theability to estimate distances.Side blind spot alert 3 158.

Electric adjustment

Select the relevant exterior mirror bypushing the mirror button to the left orright.


Then swivel the control to adjust themirror.

Folding mirrors

For pedestrian safety, the exteriormirrors will swing out of their normalmounting position if they are struckwith sufficient force. Reposition themirror by applying slight pressure tothe mirror housing.

Electric folding

Pull mirror button rearwards. Bothexterior mirrors will fold.Pull mirror button rearwards again toreturn both exterior mirrors to theiroriginal position.If an electrically folded mirror ismanually extended, pulling mirrorbutton rearwards will only electricallyextend the other mirror.

Heated mirrors

Operated by pressing b.Heating works with the enginerunning and is switched offautomatically after a short time.Heated rear window 3 38.


Interior mirrorsManual anti-dazzle

To reduce dazzle, adjust the lever onthe underside of the mirror housing.

Automatic anti-dazzle

Dazzle from following vehicles atnight is automatically reduced.

WindowsWindscreenWindscreen stickersDo not attach stickers such as tollroad stickers or similar on thewindscreen in the area of the interiormirror. Otherwise the detection zoneof the sensor and the view area of thecamera in the mirror housing could berestricted.

Windscreen replacement

Caution

If the vehicle has a front-lookingcamera sensor for the driverassistance systems, it is veryimportant that any windscreenreplacement is performedaccurately according to Vauxhallspecifications. Otherwise, thesesystems may not work properlyand there is a risk of unexpectedbehaviour and/or messages fromthese systems.


Caution

If the vehicle is equipped with aHead-up display, it is veryimportant that any windscreenreplacement is performedaccurately according to Vauxhallspecifications. Otherwise, thesystem may not work properly andthe image may look out of focus.

Power windows

9 Warning

Take care when operating thepower windows. Risk of injury,particularly to children.If there are children on the rearseats, switch on the child safetysystem for the power windows.Keep a close watch on thewindows when closing them.Ensure that nothing becomestrapped in them as they move.

Switch on ignition to operate powerwindows.

Operate the switch for the respectivewindow by pushing to open or pullingto close.Pushing or pulling gently to the firstdetent: window moves up or down aslong as the switch is operated.Pushing or pulling firmly to the seconddetent then releasing: window movesup or down automatically with safetyfunction enabled. To stop movement,operate the switch once more in thesame direction.

Safety functionIf the window glass encountersresistance above the middle of thewindow during automatic closing, it isimmediately stopped and openedagain.

Override safety functionIn the event of closing difficulties dueto frost or the like, switch on theignition, then pull the switch to the firstdetent and hold. The window movesup without safety function enabled.To stop movement, release theswitch.


Child safety system for rearwindows

Press V to deactivate rear doorpower windows; the LED illuminates.To activate, press V again.

Operating windows from outsideThe windows can be operatedremotely from outside the vehicle.

Press and hold c to open windows.Press and hold e to close windows.Release button to stop windowmovement.If the windows are fully opened orclosed, the hazard warning lights willflash twice.

OverloadIf the windows are repeatedlyoperated within short intervals, thewindow operation is disabled forsome time.

Initialising the power windowsIf the windows cannot be closedautomatically (e.g. afterdisconnecting the vehicle battery), awarning message is displayed in theDriver Information Centre.Vehicle messages 3 97.Activate the window electronics asfollows:1. Close doors.2. Switch on ignition.3. Pull switch until the window is

closed and keep pulling foradditional two seconds.

4. Push switch until the window iscompletely open and keeppushing for additionaltwo seconds.

5. Repeat for each window.

Heated rear windowOperated by pressing b together withheated exterior mirrors.Heating works with the enginerunning and is switched offautomatically after a short time.


Depending on climate control system,b is located at a different position.Climate Control systems 3 114.

Vehicles with heating andventilation system or airconditioning system

Vehicles with electronic climatecontrol system

Heated windscreenOperated by pressing ,. LED inbutton illuminates.Heating works with the enginerunning and is switched offautomatically after a short time.Depending on climate controlsystem, , is located at a differentposition.

Vehicles with electronic climatecontrol system

Vehicles with air conditioningsystem


Sun visorsThe sun visors can be folded down orswivelled to the side to preventdazzling.The covers of the mirrors should beclosed when driving.A ticket holder is located on thebackside of the sun visor.

RoofGlass panelDo not affix any stickers to the roof.Do not cover the vehicle using atarpaulin.

SunblindThe sunblind is electrically operated.

Press N gently to the first detent atthe rear: the sunblind is opened aslong as the switch is operated.

Press N firmly to the second detentand then release at the rear: thesunblind is opened as long as theswitch is operated.Press N gently to the first detent atthe front: the sunblind is closed aslong as the switch is operated.Press N firmly to the second detentand then release at the front: thesunblind is closed as long as theswitch is operated.

Safety functionIf the sunblind encounters resistanceduring automatic closing, it isimmediately stopped and openedagain.

Function standbyIn ignition switch position 1 thesunblind is operational 3 127.

Initialising after a power failureAfter a power failure, it may only bepossible to operate the sunblind to alimited extent. Initialise the system asfollows:


1. Turn key in ignition switch toposition 1.

2. Press N twice gently to the firstdetent at the rear, the sunblindopens slightly.

3. Immediately press N twice gentlyto the first detent at the front, thesunblind closes slightly.After step 3 the sunblind is ininitialising mode without safetyfunction.

4. Press N gently to the first detentat the rear until the sunblind iscompletely opened.

5. Press N gently to the first detentat the front until the sunblind iscompletely closed.

After this procedure, the sunblind isinitialised with safety functionactivated.When N is pressed firmly to thesecond detent during initialising, theprocedure is cancelled.

42 Seats, restraints

Seats, restraints

Head restraints ............................ 42Front seats ................................... 43

Seat position .............................. 43Seat adjustment ........................ 44Armrest ...................................... 46Heating ...................................... 46

Rear seats ................................... 47Armrest ...................................... 47

Seat belts ..................................... 48Three-point seat belt ................. 49

Airbag system .............................. 51Front airbag system ................... 54Side airbag system .................... 54Curtain airbag system ............... 55Airbag deactivation .................... 55

Child restraints ............................. 57Child restraint systems .............. 57Child restraint installationlocations ................................... 60

Head restraints

Position

9 Warning

Only drive with the head restraintset to the proper position.

The upper edge of the head restraintshould be at upper head level. If thisis not possible for extremely tallpeople, set to highest position, andset to lowest position for small people.

Head restraints on front seats

Height adjustment

Press release button, adjust height,engage.

Seats, restraints 43

Head restraints on rear seats

Height adjustment

Pull the head restraint upwards orpress the catch to release and pushthe head restraint downwards.

Front seatsSeat position

9 Warning

Only drive with the seat correctlyadjusted.

9 Danger

Do not sit closer than 25 cm to thesteering wheel, to permit safeairbag deployment.

9 Warning

Never adjust seats while driving asthey could move uncontrollably.

● Sit with buttocks as far backagainst the backrest as possible.Adjust the distance between theseat and the pedals so that legsare slightly angled when fullypressing the pedals. Slide thefront passenger seat as far backas possible.

● Set seat height high enough tohave a clear field of vision on allsides and of all displayinstruments. There should be atleast one hand of clearancebetween head and the roofframe. Your thighs should restlightly on the seat withoutpressing into it.


● Sit with shoulders as far backagainst the backrest as possible.Set the backrest rake so that it ispossible to easily reach thesteering wheel with arms slightlybent. Maintain contact betweenshoulders and the backrest whenturning the steering wheel. Donot angle the backrest too farback. We recommend amaximum rake of approx. 25°.

● Adjust seat and steering wheel ina way that the wrist rests on topof the steering wheel while thearm is fully extended andshoulders on the backrest.

● Adjust the steering wheel 3 73.● Adjust the head restraint 3 42.● Adjust the thigh support so that

there is a space approx. twofingers wide between the edge ofthe seat and the hollow of theknee.

● Adjust the lumbar support so thatit supports the natural shape ofthe spine.

Seat adjustmentDrive only with engaged seats andbackrests.

Longitudinal adjustment

Pull handle, slide seat, releasehandle. Try to move the seat back andforth to ensure that the seat is lockedin place.

Backrest inclination

Turn handwheel. Do not lean onbackrest when adjusting.


Seat height

Lever pumping motionup : seat higherdown : seat lower

Seat inclination

Press switchtop : front end higherbottom : front end lower

Lumbar support

Adjust lumbar support using the four-way switch to suit personalrequirements.Moving support up and down: pushswitch up or down.Increasing and decreasing support:push switch forwards or backwards.


Adjustable thigh support

Pull the lever and slide the thighsupport.

Armrest

Armrest can be folded up.

Heating

Adjust heating to the desired settingby pressing ß for the respective seatone or more times. The controlindicator in the button indicates thesetting.Prolonged use of the highest settingfor people with sensitive skin is notrecommended.Seat heating is operational whenengine is running.During an Autostop, seat heating isalso operational.Stop-start system 3 131.


Rear seats

Longitudinal adjustmentOn vehicles with sliding rear seats,both parts of the rear seat can beindividually moved forwards orbackwards.

9 Warning

Seat backrests must becompletely folded up or down tohave the seats engaged in theguide rails.Only drive with the seats engagedin the guide rails.

Folding backrests 3 64.

9 Warning

Never adjust seats while driving asthey could move uncontrollably.

Pull handle, slide seat, releasehandle and allow seat to engage.The seats can be engaged inintermediate positions.

Armrest

The armrest contains cupholders.Folding down armrest 3 64.


Seat belts

The seat belts are locked duringheavy acceleration or deceleration ofthe vehicle, holding the occupants inthe seat position. Therefore the risk ofinjury is considerably reduced.

9 Warning

Fasten seat belt before each trip.In the event of an accident, peoplenot wearing seat belts endangertheir fellow occupants andthemselves.

Seat belts are designed to be used byonly one person at a time. Childrestraint system 3 57.Periodically check all parts of the beltsystem for damage, soiling andproper functionality.Have damaged componentsreplaced. After an accident, have thebelts and triggered belt pretensionersreplaced by a workshop.NoticeMake sure that the belts are notdamaged by shoes or sharp-edgedobjects or are trapped. Prevent dirtfrom getting into the belt retractors.

Seat belt reminderEach seat is equipped with a seat beltreminder, indicated by a controlindicator X for the respective seat inthe roof console 3 86.

Belt force limitersStress on the body is reduced by thegradual release of the belt during acollision.

Belt pretensionersIn the event of a head-on, rear-end orside-on collision of a certain severity,the front and rear seat belts aretightened. The front seat belts aretightened by two pretensioners perseat. The outer rear seat belts aretightened by one pretensioner perseat.

9 Warning

Incorrect handling (e.g. removal orfitting of belts) can trigger the beltpretensioners.

Deployment of the belt pretensionersis indicated by continuous illuminationof control indicator v 3 86.Triggered belt pretensioners must bereplaced by a workshop. Beltpretensioners can only be triggeredonce.NoticeDo not affix or install accessories orother objects that may interfere withthe operation of the beltpretensioners. Do not make any


modifications to belt pretensionercomponents as this will invalidatethe operating permit of your vehicle.

Three-point seat beltFasten

Withdraw the belt from the retractor,guide it untwisted across the bodyand insert the latch plate into thebuckle. Tighten the lap belt regularlywhilst driving by pulling the shoulderbelt.

Loose or bulky clothing prevents thebelt from fitting snugly. Do not placeobjects such as handbags or mobilephones between the belt and yourbody.

9 Warning

The belt must not rest against hardor fragile objects in the pockets ofyour clothing.

Seat belt reminder X 3 86.

Unfasten

To release belt, press red button onbelt buckle.

Centre seat belt of the secondseat rowThe centre seat is equipped with aparticular three-point seat belt.


Pull latch plates with the belt out ofbelt holder in the roof.

Insert lower latch plate into left-handbuckle (1) at the centre seat. Guidethe upper latch plate with the belt overthe lap area and the shoulder (do nottwist) and insert it into right-handbuckle (2) at centre seat.To unfasten the seat belt, first pressthe button on the right-hand buckle(2) and remove upper latch plate.Then press the button on the left-hand buckle (1) and remove lowerlatch plate. The seat belt retractsautomatically.

Using the seat belt while pregnant

9 Warning

The lap belt must be positioned aslow as possible across the pelvisto prevent pressure on theabdomen.


Airbag systemThe airbag system consists of anumber of individual systemsdepending on the scope ofequipment.When triggered, the airbags inflatewithin milliseconds. They also deflateso quickly that it is often unnoticeableduring the collision.

9 Warning

If handled improperly, the airbagsystems can be triggered in anexplosive manner.

NoticeThe airbag systems and beltpretensioner control electronics arelocated in the centre console area.Do not put any magnetic objects inthis area.Do not affix any objects onto theairbag covers and do not cover themwith other materials. Have damagedcovers replaced by a workshop.

Each airbag is triggered only once.Have deployed airbags replaced bya workshop. Furthermore, it may benecessary to have the steeringwheel, the instrument panel, parts ofthe panelling, the door seals,handles and the seats replaced.Do not make any modifications tothe airbag system as this willinvalidate the vehicle operatingpermit.

When the airbags inflate, escapinghot gases may cause burns.Control indicator v for airbag systems3 86.

Child restraint systems on frontpassenger seat with airbagsystemsWarning according to ECE R94.02:

EN: NEVER use a rearward-facingchild restraint on a seat protected byan ACTIVE AIRBAG in front of it;DEATH or SERIOUS INJURY to theCHILD can occur.DE: Nach hinten gerichteteKindersitze NIEMALS auf einem Sitzverwenden, der durch einen davorbefindlichen AKTIVEN AIRBAGgeschützt ist, da dies den TOD oderSCHWERE VERLETZUNGEN DESKINDES zur Folge haben kann.FR: NE JAMAIS utiliser un sièged'enfant orienté vers l'arrière sur unsiège protégé par un COUSSINGONFLABLE ACTIF placé devant lui,


sous peine d'infliger desBLESSURES GRAVES, voireMORTELLES à l'ENFANT.ES: NUNCA utilice un sistema deretención infantil orientado haciaatrás en un asiento protegido por unAIRBAG FRONTAL ACTIVO. Peligrode MUERTE o LESIONES GRAVESpara el NIÑO.RU: ЗАПРЕЩАЕТСЯустанавливать детскоеудерживающее устройство лицомназад на сиденье автомобиля,оборудованном фронтальнойподушкой безопасности, еслиПОДУШКА НЕ ОТКЛЮЧЕНА! Этоможет привести к СМЕРТИ илиСЕРЬЕЗНЫМ ТРАВМАМРЕБЕНКА.NL: Gebruik NOOIT een achterwaartsgericht kinderzitje op een stoel meteen ACTIEVE AIRBAG ervoor, omDODELIJK of ERNSTIG LETSEL vanhet KIND te voorkomen.DA: Brug ALDRIG en bagudvendtautostol på et forsæde med AKTIVAIRBAG, BARNET kan komme iLIVSFARE eller komme ALVORLIGTTIL SKADE.

SV: Använd ALDRIG en bakåtvändbarnstol på ett säte som skyddas meden framförvarande AKTIV AIRBAG.DÖDSFALL eller ALLVARLIGASKADOR kan drabba BARNET.FI: ÄLÄ KOSKAAN sijoita taaksepäinsuunnattua lasten turvaistuintaistuimelle, jonka edessä onAKTIIVINEN TURVATYYNY, LAPSIVOI KUOLLA tai VAMMAUTUAVAKAVASTI.NO: Bakovervendtbarnesikringsutstyr må ALDRI brukespå et sete med AKTIVKOLLISJONSPUTE foran, da det kanføre til at BARNET utsettes forLIVSFARE og fare for ALVORLIGESKADER.PT: NUNCA use um sistema deretenção para crianças voltado paratrás num banco protegido com umAIRBAG ACTIVO na frente domesmo, poderá ocorrer a PERDA DEVIDA ou FERIMENTOS GRAVES naCRIANÇA.IT: Non usare mai un sistema disicurezza per bambini rivoltoall'indietro su un sedile protetto da

AIRBAG ATTIVO di fronte ad esso:pericolo di MORTE o LESIONIGRAVI per il BAMBINO!EL: ΠΟΤΕ μη χρησιμοποιείτε παιδικόκάθισμα ασφαλείας με φορά προς ταπίσω σε κάθισμα που προστατεύεταιαπό μετωπικό ΕΝΕΡΓΟ ΑΕΡΟΣΑΚΟ,διότι το παιδί μπορεί να υποστείΘΑΝΑΣΙΜΟ ή ΣΟΒΑΡΟΤΡΑΥΜΑΤΙΣΜΟ.PL: NIE WOLNO montować fotelikadziecięcego zwróconego tyłem dokierunku jazdy na fotelu, przedktórym znajduje się WŁĄCZONAPODUSZKA POWIETRZNA.Niezastosowanie się do tegozalecenia może być przyczynąŚMIERCI lub POWAŻNYCHOBRAŻEŃ u DZIECKA.TR: Arkaya bakan bir çocuk emniyetsistemini KESİNLİKLE önünde birAKTİF HAVA YASTIĞI ilekorunmakta olan bir koltuktakullanmayınız. ÇOCUK ÖLEBİLİRveya AĞIR ŞEKİLDEYARALANABİLİR.UK: НІКОЛИ не використовуйтесистему безпеки для дітей, щовстановлюється обличчям назад,


на сидінні з УВІМКНЕНОЮПОДУШКОЮ БЕЗПЕКИ, інакше цеможе призвести до СМЕРТІ чиСЕРЙОЗНОГО ТРАВМУВАННЯДИТИНИ.HU: SOHA ne használjon hátrafelénéző biztonsági gyerekülést előlrőlAKTÍV LÉGZSÁKKAL védett ülésen,mert a GYERMEK HALÁLÁT vagyKOMOLY SÉRÜLÉSÉT okozhatja.HR: NIKADA nemojte koristiti sustavzadržavanja za djecu okrenut premanatrag na sjedalu s AKTIVNIMZRAČNIM JASTUKOM ispred njega,to bi moglo dovesti do SMRTI iliOZBILJNJIH OZLJEDA za DIJETE.SL: NIKOLI ne nameščajte otroškegavarnostnega sedeža, obrnjenega vnasprotni smeri vožnje, na sedež zAKTIVNO ČELNO ZRAČNOBLAZINO, saj pri tem obstajanevarnost RESNIH ali SMRTNIHPOŠKODB za OTROKA.SR: NIKADA ne koristiti bezbednosnisistem za decu u kome su decaokrenuta unazad na sedištu saAKTIVNIM VAZDUŠNIM

JASTUKOM ispred sedišta zato štoDETE može da NASTRADA ili da seTEŠKO POVREDI.MK: НИКОГАШ не користете детскоседиште свртено наназад наседиште заштитено со АКТИВНОВОЗДУШНО ПЕРНИЧЕ пред него,затоа што детето може ДА ЗАГИНЕили да биде ТЕШКО ПОВРЕДЕНО.BG: НИКОГА не използвайтедетска седалка, гледаща назад,върху седалка, която е защитеначрез АКТИВНА ВЪЗДУШНАВЪЗГЛАВНИЦА пред нея - може дасе стигне до СМЪРТ илиСЕРИОЗНО НАРАНЯВАНЕ наДЕТЕТО.RO: Nu utilizaţi NICIODATĂ un scaunpentru copil îndreptat spre partea dinspate a maşinii pe un scaun protejatde un AIRBAG ACTIV în faţa sa;acest lucru poate duce la DECESULsau VĂTĂMAREA GRAVĂ aCOPILULUI.CS: NIKDY nepoužívejte dětskýzádržný systém instalovaný protisměru jízdy na sedadle, které jechráněno před sedadlem AKTIVNÍM

AIRBAGEM. Mohlo by dojít kVÁŽNÉMU PORANĚNÍ nebo ÚMRTÍDÍTĚTE.SK: NIKDY nepoužívajte detskúsedačku otočenú vzad na sedadlechránenom AKTÍVNYM AIRBAGOM,pretože môže dôjsť k SMRTI aleboVÁŽNYM ZRANENIAM DIEŤAŤA.LT: JOKIU BŪDU nemontuokite atgalatgręžtos vaiko tvirtinimo sistemossėdynėje, prieš kurią įrengta AKTYVIORO PAGALVĖ, nes VAIKAS GALIŽŪTI arba RIMTAI SUSIŽALOTI.LV: NEKĀDĀ GADĪJUMĀneizmantojiet uz aizmuguri vērstubērnu sēdeklīti sēdvietā, kas tiekaizsargāta ar tās priekšā uzstādītuAKTĪVU DROŠĪBAS SPILVENU, jopretējā gadījumā BĒRNS var gūtSMAGAS TRAUMAS vai IET BOJĀ.ET: ÄRGE kasutage tahapoolesuunatud lapseturvaistet istmel, milleees on AKTIIVSE TURVAPADJAGAkaitstud iste, sest see võibpõhjustada LAPSE SURMA võiTÕSISE VIGASTUSE.


MT: QATT tuża trażżin għat-tfal lijħares lejn in-naħa ta’ wara fuq sitprotett b’AIRBAG ATTIV quddiemu;dan jista’ jikkawża l-MEWT jewĠRIEĦI SERJI lit-TFAL.GA: Ná húsáid srian sábháilteachtalinbh cúil RIAMH ar shuíochán abhfuil mála aeir ag feidhmiú os achomhair. Tá baol BÁIS nó GORTÚDONA don PHÁISTE ag baint leis.Beyond the warning required byECE R94.02, for safety reasons aforward-facing child restraint systemmust only be used subject to theinstructions and restrictions in thetable 3 60.The airbag label is located on bothsides of the front passenger sun visor.Airbag deactivation 3 55.

Front airbag systemThe front airbag system consists ofone airbag in the steering wheel andone in the instrument panel on thefront passenger side. These can beidentified by the word AIRBAG.

The front airbag system is triggered inthe event of a front-end impact of acertain severity. The ignition must beswitched on.

The inflated airbags cushion theimpact, thereby reducing the risk ofinjury to the upper body and head ofthe front seat occupantsconsiderably.

9 Warning

Optimum protection is onlyprovided when the seat is in theproper position.Seat position 3 43.

Keep the area in which the airbaginflates clear of obstructions.Fit the seat belt correctly andengage securely. Only then is theairbag able to protect.

Side airbag system

The side airbag system consists of anairbag in each front seat backrest.This can be identified by the wordAIRBAG.The side airbag system is triggered inthe event of a side impact of a certainseverity. The ignition must beswitched on.


The inflated airbags cushion theimpact, thereby reducing the risk ofinjury to the upper body and pelvis inthe event of a side-on collisionconsiderably.

9 Warning

Keep the area in which the airbaginflates clear of obstructions.

NoticeOnly use protective seat covers thathave been approved for the vehicle.Be careful not to cover the airbags.

Curtain airbag systemThe curtain airbag system consists ofan airbag in the roof frame on eachside. This can be identified by theword AIRBAG on the roof pillars.The curtain airbag system is triggeredin the event of a side-on impact of acertain severity. The ignition must beswitched on.

The inflated airbags cushion theimpact, thereby reducing the risk ofinjury to the head in the event of aside-on impact considerably.

9 Warning

Keep the area in which the airbaginflates clear of obstructions.The hooks on the handles in theroof frame are only suitable forhanging up light articles ofclothing, without coat hangers. Donot keep any items in theseclothes.

Airbag deactivationThe front passenger airbag systemmust be deactivated for child restraintsystem on the passenger seataccording to the instructions in thetable 3 60. The side airbag andcurtain airbag systems, the beltpretensioners and all driver airbagsystems will remain active.


The front passenger airbag systemcan be deactivated via a key-operated switch on the passengerside of the instrument panel.Use the ignition key to choose theposition:*OFF : front passenger airbag is

deactivated and will notinflate in the event of acollision. Control indicator*OFF illuminatescontinuously in the centreconsole

ÓON : front passenger airbag isactive

9 Danger

Deactivate passenger airbag onlyin combination with the use of achild restraint system, subject tothe instructions and restrictions inthe table 3 60.Otherwise, there is a risk of fatalinjury for a person occupying aseat with a deactivated frontpassenger airbag.

If the control indicator ÓONilluminates for approx. 60 secondsafter the ignition is switched on, thefront passenger airbag system willinflate in the event of a collision.If the control indicator *OFFilluminates after the ignition isswitched on, the front passengerairbag system is deactivated. It stayson while the airbag is deactivated.If both control indicators areilluminated at the same time, there isa system failure. The status of thesystem is not discernible, thereforeno person is allowed to occupy thefront passenger seat. Contact aworkshop immediately.Consult a workshop immediately ifneither of the two control indicatorsare illuminated.Change status only when the vehicleis stopped with the ignition off.Status remains until the next change.Control indicator for airbagdeactivation 3 87.


Child restraintsChild restraint systems

9 Danger

If using a rear-facing child restraintsystem on the front passengerseat, the airbag system for thefront passenger seat must bedeactivated. This also applies tocertain forward-facing childrestraint systems as indicated inthe tables 3 60.

Airbag deactivation 3 55.Airbag label 3 51.We recommend a child restraintsystem which is tailored specifically tothe vehicle. For further information,contact your workshop.When a child restraint system is beingused, pay attention to the followingusage and installation instructionsand also those supplied with the childrestraint system.

Always comply with local or nationalregulations. In some countries, theuse of child restraint systems isforbidden on certain seats.Child restraint systems can befastened with:● Three-point seat belt● ISOFIX brackets● Top-tether anchor

Three-point seat beltChild restraint systems can befastened by using a three-point seatbelt.

ISOFIX brackets

Fasten vehicle-approved ISOFIXchild restraint systems to the ISOFIXbrackets. Specific vehicle ISOFIXchild restraint system positions aremarked in the ISOFIX table 3 60.ISOFIX brackets are indicated by alabel on the backrest.An i-Size child restraint system is anuniversal ISOFIX child restraintsystem according UN Regulation No.129.All i-Size child restraint systems canbe used on any vehicle seat suitablefor i-Size, i-Size table 3 60.Either a Top-tether strap or a supportleg must be used in addition to theISOFIX brackets.


i-Size child seats and vehicle seatswith i-Size approval are marked withi-Size symbol, see illustration.

Top-tether anchorsTop-tether anchors are marked withthe symbol : for a child seat.

In addition to the ISOFIX brackets,fasten the Top-tether strap to theTop-tether anchors.ISOFIX child restraint systems ofuniversal category positions aremarked in the table by IUF 3 60.

Selecting the right systemThe rear seats are the mostconvenient location to fasten a childrestraint system.Children should travel facingrearwards in the vehicle as long aspossible. This makes sure that thechild's backbone, which is still veryweak, is under less strain in the eventof an accident.

Suitable are restraint systems thatcomply with valid UN ECEregulations. Check local laws andregulations for mandatory use of childrestraint systems.The following child restraints arerecommended for the followingweight classes:● Maxi Cosi Cabriofix for group 0,

group 0+● Duo Plus for group I● Kidfix XP for group II/III● Graco Junior for group III

Ensure that the child restraint systemto be installed is compatible with thevehicle type.Ensure that the mounting location ofthe child restraint system within thevehicle is correct, see followingtables.Allow children to enter and exit thevehicle only on the side facing awayfrom the traffic.When the child restraint system is notin use, secure the seat with a seat beltor remove it from the vehicle.


NoticeDo not affix anything on the childrestraint systems and do not coverthem with any other materials.A child restraint system which hasbeen subjected to stress in anaccident must be replaced.


Child restraint installation locationsPermissible options for fastening a child restraint system with a three-point seat belt

Weight classOn front passenger seat

On rear outboard seats On rear centre seatactivated airbag deactivated airbag

Group 0: up to 10 kg X U1,2 U/L3 X

Group 0+: up to 13 kg X U1,2 U/L3 X

Group I: 9 to 18 kg X U1,2 U/L3,4 X

Group II: 15 to 25 kg U1,2 X U/L3,4 X

Group III: 22 to 36 kg U1,2 X U/L3,4 X

U : universal suitability in conjunction with three-point seat beltL : suitable for particular child restraint systems of the 'specific-vehicle', 'restricted' or 'semi-universal' categories. The

child restraint system must be approved for the specific vehicle type (refer to the vehicle type list of the child restraintsystem)

X : no child restraint system permitted in this weight class1 : move seat forwards as far as necessary and adjust seat backrest inclination as far as necessary to a vertical position

to ensure that the belt runs forwards from the upper anchorage point2 : move seat height adjustment upwards as far as necessary and adjust seat backrest inclination as far as necessary

to a vertical position to ensure that the belt is tight on the buckle side3 : move the respective front seat ahead of the child restraint system forwards and the sliding rear seat backwards as

far as necessary4 : adjust the respective headrest as necessary or remove if required


Permissible options for fitting an ISOFIX child restraint system with ISOFIX brackets

Weight class Size class FixtureOn front passenger seat On rear outboard

seatsOn rear centreseatactivated airbag deactivated airbag

Group 0: up to 10 kg G ISO/L2 X X X X

F ISO/L1 X X X X

E ISO/R1 X X IL1 X

Group 0+: up to 13 kg E ISO/R1 X X IL1 X

D ISO/R2 X X IL1 X

C ISO/R3 X X IL1 X

Group I: 9 to 18 kg D ISO/R2 X X IL1,2 X

C ISO/R3 X X IL1,2 X

B ISO/F2 X X IL, IUF1,2 X

B1 ISO/F2X X X IL, IUF1,2 X

A ISO/F3 X X IL, IUF1,2 X

Group II: 15 to 25 kg X X IL1,2 X

Group III: 22 to 36 kg X X IL1,2 X


IL : suitable for particular ISOFIX restraint systems of the 'specific-vehicle', 'restricted' or 'semi-universal' categories.The ISOFIX restraint system must be approved for the specific vehicle type (refer to the vehicle type list of the childrestraint system)

IUF : suitable for ISOFIX forward-facing child restraint systems of universal category approved for use in this weight classX : no ISOFIX child restraint system approved in this weight class1 : move the respective front seat ahead of the child restraint system forwards and the sliding rear seat backwards as

far as necessary2 : adjust the respective headrest as necessary or remove if required

ISOFIX size class and seat deviceA – ISO/F3 : forward-facing child restraint system for children of maximum size in the weight class 9 to 18 kgB – ISO/F2 : forward-facing child restraint system for smaller children in the weight class 9 to 18 kgB1 – ISO/F2X : forward-facing child restraint system for smaller children in the weight class 9 to 18 kgC – ISO/R3 : rear-facing child restraint system for children of maximum size in the weight class up to 18 kgD – ISO/R2 : rear-facing child restraint system for smaller children in the weight class up to 18 kgE – ISO/R1 : rear-facing child restraint system for young children in the weight class up to 13 kgF– ISO/L1 : left lateral facing position child restraint system (carry-cot)G – ISO/L2 : right lateral facing position child restraint system (carry-cot)

Permissible options for fitting an i-Size child restraint system with ISOFIX brackets

On front passenger seatOn rear outboard seats On rear centre seatactivated airbag deactivated airbag

i-Size child restraint systems X X i - U X

i - U : suitable for i-Size 'universal' forward and rearward facing child restraint systemsX : seating position not suitable for i-Size 'universal' child restraint systems

Storage 63

Storage

Storage compartments ................ 63Glovebox ................................... 63Cupholders ................................ 63Centre console storage ............. 64

Load compartment ....................... 64Load compartment cover ........... 67Rear floor storage cover ............ 67Lashing eyes ............................. 68Warning triangle ........................ 69First aid kit ................................. 69

Roof rack system ......................... 70Roof rack ................................... 70

Loading information ..................... 70

Storage compartments

9 Warning

Do not store heavy or sharpobjects in the storagecompartments. Otherwise, thestorage compartment lid couldopen and vehicle occupants couldbe injured by objects being thrownaround in the event of hardbraking, a sudden change indirection or an accident.

Glovebox

On some versions the glovebox isventilated. Air ventilation andtemperature depend on the settingsof the climate control system. The airvent in the glove box can be closed3 123.Other versions may have a CD playerin the glove box.The glovebox should be closed whilstdriving.

Cupholders

Cupholders are located in the centreconsole.

64 Storage

Additional cupholders are located inthe rear armrest. Fold down armrest.

Centre console storageThe storage container can be used tostore small items.

Depending on the version, thestorage compartment is locatedunder a cover.

Load compartmentThe rear seat backrest is divided intwo parts. Both parts can be foldeddown.Before folding rear seat backrests,execute the following if necessary:● Remove the load compartment

cover 3 67.● Press and hold the catch to push

the head restraints down 3 42.

Load compartment extension(version with fixed rear seats)

● Pull the release lever on one orboth outer sides and fold down

Storage 65

the backrests onto the seatcushion.

When folding the backrests,insert the seat belts in the guidinglatches and pull the seat beltsalong with them.

● To fold up, raise the backrestsand guide them into an uprightposition until they engageaudibly.

The backrests are properlyengaged when the red mark nearthe release lever is no longervisible.

9 Warning

When folding up, ensure thatbackrests are securely locked inposition before driving. Failure todo so may result in personal injuryor damage to the load or vehicle inthe event of hard braking or acollision.

Load compartment extension(version with sliding rear seats)

Without folding backrestsMove both rear seats to the mostforward position 3 47.

With folding backrests● Move both rear seats to the most

rearward position 3 47.

● Pull the loop and fold down thebackrest onto the seat cushion.

66 Storage

To fold down the backrest fromthe load compartment, lift therelease lever.

NoticeFold up the armrest before foldingdown the relevant part of thebackrest. Otherwise this part of thebackrest can not be folded down.

When folding the backrests,insert the seat belts in the guidinglatches and pull the seat beltsalong with them.

● To fold up, raise the backrestsand guide them into an uprightposition until they engageaudibly.The backrests are properlyengaged when the red mark onthe loop is no longer visible.

Folding the armrest in the rearcentre backrest

Pull the loop to fold down the reararmrest.

Storage 67

The armrest can also be folded downfrom the rear by pulling the loop.Suitable for loading long, narrowobjects.Ensure that the armrest engagesafter folding up.

Load compartment coverDo not place any objects on the cover.

Removing cover

Unhook retaining straps from tailgate.

Lift cover at the rear and push itupwards at the front.Remove the cover.

Stowing

The load compartment cover can bestored behind the rear seat backrests.Unhook retaining straps and lift thecover backwards until it unlatches.Then slide it down in the guidesbehind the seat backrests.

Fitting coverEngage cover in side guides and folddownwards. Attach the retainingstraps to the tailgate.

Rear floor storage cover

The rear floor cover can be removed.Raise cover at the recess andremove.

68 Storage

The cover can also be stored behindthe rear seats.

Double load floorThe double load floor can be insertedin the load compartment in twopositions:

● lower position above the sparewheel well cover

● upper position interlocked withthe grab handle into back paneltrim

To remove, press the handle tounlock the load floor and lift it up whileusing the handle.If mounted in the upper position, thespace between the load floor and thespare wheel well cover can be usedas a storage compartment.In this position, if the rear seatbackrests are folded forwards, analmost completely flat load bay iscreated.In the upper position, the double loadfloor is able to withstand a maximumload of 100 kg. In the lower position,the double load floor is able towithstand the maximum permissibleload.

Lashing eyes

The lashing eyes are designed tosecure items against slippage, e.g.using lashing straps or luggage net.

Storage 69

Warning triangle

Stow the warning triangle in the spaceat the rear of the load compartmentand secure it with the velcro fastener.

First aid kit

Fold down the cover on the left sideof the load compartment.

Stow the first aid kit in the stowagecompartment.

70 Storage

Roof rack systemRoof rackFor safety reasons and to avoiddamage to the roof, the vehicle-approved roof rack system isrecommended.Follow the installation instructionsand remove the roof rack when not inuse.

Mounting roof rack

Open all doors.Mounting points are located in eachdoor frame of the vehicle body.

Detach the cover from each mountingpoint and fasten the roof rack with theattached screws.

Loading information

● Heavy objects in the loadcompartment should be placedagainst the seat backrests. Makesure that the backrests aresecurely engaged, i.e. no longershowing the red marks on theside near the release lever or onthe loop. If objects can bestacked, heavier objects shouldbe placed at the bottom.

● Secure objects with lashingstraps attached to lashing eyes3 68.

Storage 71

● Secure loose objects in the loadcompartment to prevent fromsliding.

● When transporting objects in theload compartment, the backrestsof the rear seats must not beangled forward.

● Do not allow the load to protrudeabove the upper edge of thebackrests.

● Do not place any objects on theload compartment cover or theinstrument panel, and do notcover the sensor on top of theinstrument panel.

● The load must not obstruct theoperation of the pedals, parkingbrake and gear selector, orhinder the freedom of movementof the driver. Do not place anyunsecured objects in the interior.

● Do not drive with an open loadcompartment.

9 Warning

Always make sure that the load inthe vehicle is securely stowed.Otherwise objects can be thrownaround inside the vehicle andcause personal injury or damageto the load or car.

● The payload is the differencebetween the permitted grossvehicle weight (see identificationplate 3 217) and the EC kerbweight.To calculate the payload, enterthe data for your vehicle in theweights table at the front of thismanual.The EC kerb weight includesweights for the driver (68 kg),luggage (7 kg) and all fluids (fueltank 90% full).Optional equipment andaccessories increase the kerbweight.

● Driving with a roof load increasesthe sensitivity of the vehicle tocross-winds and has a

detrimental effect on vehiclehandling due to the vehicle'shigher centre of gravity.Distribute the load evenly andsecure it properly with retainingstraps. Adjust the tyre pressureand vehicle speed according tothe load conditions. Check andretighten the straps frequently.Do not drive faster than 75 mph.The permissible roof load is60 kg. The roof load is thecombined weight of the roof rackand the load.

72 Instruments and controls

Instruments andcontrols

Controls ....................................... 73Steering wheel adjustment ........ 73Steering wheel controls ............. 73Heated steering wheel ............... 73Horn ........................................... 74Windscreen wiper/washer ......... 74Rear window wiper/washer ....... 76Outside temperature .................. 76Clock ......................................... 77Power outlets ............................. 77Inductive charging ..................... 78Ashtrays .................................... 78

Warning lights, gauges and indi‐cators ........................................... 79

Instrument cluster ...................... 79Speedometer ............................. 82Odometer .................................. 83Trip odometer ............................ 83Tachometer ............................... 83Fuel gauge ................................ 84Engine coolant temperaturegauge ....................................... 84

Service display .......................... 84Control indicators ...................... 85

Turn signal ................................. 85Seat belt reminder ..................... 86Airbag and belt tensioners ......... 86Airbag deactivation .................... 87Charging system ....................... 87Malfunction indicator light .......... 87Service vehicle soon ................. 87Stop engine ............................... 87System check ............................ 88Brake and clutch system ........... 88Antilock brake system (ABS) ..... 88Gear shifting .............................. 88Lane departure warning ............ 88Electronic Stability Control andTraction Control system ........... 89

Electronic Stability Control andTraction Control system off ...... 89

Engine coolant temperature ...... 89Preheating ................................. 89Diesel particle filter .................... 89AdBlue ....................................... 89Deflation detection system ........ 90Engine oil pressure .................... 90Low fuel ..................................... 90Autostop .................................... 90Exterior light .............................. 90High beam ................................. 91High beam assist ....................... 91Low beam .................................. 91Fog light ..................................... 91

Rear fog light ............................. 91Rain sensor ............................... 91Cruise control ............................ 91Speed limiter ............................. 91Traffic sign assistant .................. 91Door open .................................. 91

Information displays ..................... 92Driver Information Centre .......... 92Info display ................................ 94Head-up display ........................ 96

Vehicle messages ........................ 97Warning chimes ......................... 98Battery voltage .......................... 98

Vehicle personalisation ................ 99Telematics service ..................... 102

OnStar ..................................... 102

Instruments and controls 73

ControlsSteering wheel adjustment

Unlock lever, adjust steering wheel,then engage lever and ensure it isfully locked.Do not adjust steering wheel unlessvehicle is stationary and steeringwheel lock has been released.

Steering wheel controlsSome driver assistance systems,Infotainment system and a connectedmobile phone can be operated via thecontrols on the steering wheel.

Driver assistance systems 3 146.Further information is available in theInfotainment manual.

Heated steering wheel

Activate heating by pressing *.Activation is indicated by the LED inthe button.


The recommended grip areas of thesteering wheel are heated quickerand to a higher temperature than theother areas.Heating is operational when theengine is running and during anAutostop.Stop-start system 3 131.

Horn

Press j.

Windscreen wiper/washerWindscreen wiper with adjustablewiper interval

HI : fastLO : slowINT : interval wipingOFF : off

For a single wipe when thewindscreen wiper is off, press thelever downwards to position 1x.Do not use if the windscreen is frozen.Switch off in car washes.

Adjustable wiper interval

Wiper lever in position INT.Turn the adjuster wheel to adjust thewiping frequency.


Windscreen wiper with rainsensor

HI : fastLO : slowAUTO : automatic wiping with rain

sensorOFF : off

In AUTO position, the rain sensordetects the amount of water on thewindscreen and automaticallyregulates the frequency of thewindscreen wiper.For a single wipe when thewindscreen wiper is off, press thelever downwards to position 1x.Do not use if the windscreen is frozen.

Switch off in car washes.

Adjustable sensitivity of the rainsensor

Wiper lever in position AUTO.Turn the adjuster wheel to adjust thesensitivity of the rain sensor.

Keep the sensor free from dust, dirtand ice.Control indicator < 3 74.

Windscreen washer


Pull lever. Washer fluid is sprayedonto the windscreen and the wiperwipes a few times.Washer fluid 3 178.

Rear window wiper/washerRear window wiper

Turn outer cap to activate the rearwindow wiper:OFF : offINT : intermittent operationON : continuous operation

Do not use if the rear window isfrozen.

Switch off in car washes.The rear window wiper comes onautomatically when the windscreenwiper is switched on and reverse gearis engaged.Activation or deactivation of thisfunction can be changed in theVehicle personalisation menu 3 99.

Rear window washer

Push lever.Washer fluid is sprayed onto the rearwindow and the wiper wipes a fewtimes.

The rear window washer system isdeactivated when the fluid level islow.Washer fluid 3 178.

Outside temperatureA drop in temperature is indicatedimmediately and a rise in temperatureafter a time delay.

Illustration shows an example.If outside temperature drops to 3 °C,a warning message is displayed in theDriver Information Centre.


9 Warning

The road surface may already beicy even though the displayindicates a few degrees above 0°C.

ClockDate and time are shown in theInfo-Display 3 94.Setting date and time, seeInfotainment manual.

Power outlets

A 12 Volt power outlet is located in thecentre console.

Another power outlet is located in theconsole between the front seats.Do not exceed the maximum powerconsumption of 120 watts.With ignition off, the power outlet isdeactivated. Additionally, the poweroutlet is deactivated in the event oflow vehicle battery voltage.Electrical accessories that areconnected must comply with theelectromagnetic compatibilityrequirements laid down inDIN VDE 40 839.

Do not connect any current-deliveringaccessories, e.g. electrical chargingdevices or batteries.Do not damage the outlets by usingunsuitable plugs.Stop-start system 3 131.

USB charging port

One or two USB ports are located inthe centre console. Both USB portsare prepared for charging devices.When two USB ports are avilable, theupper USB port can be used toconnect a phone for phone projection.


NoticeThe sockets must always be keptclean and dry.

Inductive charging

9 Warning

Inductive charging can affect theoperation of implantedpacemakers or other medicaldevices. If applicable, seekmedical advice before using theinductive charging device.

9 Warning

Remove any metal objects fromthe charging device beforecharging a mobile phone, as theseobjects could become very hot.

To charge a device, the ignition mustbe switched on.The charging area is in the storagebelow the climate controls.To charge a mobile phone:1. Remove all objects from the

charging device.2. Place the mobile phone with the

display facing upwards on thecharging device in the storage.

Charging status is indicated in theLED: illuminates green, when mobilephone is charging.PMA or Qi compatible mobile phonescan be charged inductively.

A back cover with an integrated coil(e.g. Samsung 4 and 5) or a jacket(e.g. some iPhone models) may berequired to charge a mobile phone.The mobile phone must be smallerthan 8 cm in width and 15 cm in lengthto fit into the charging device.

Ashtrays

Caution

To be used only for ash and not forcombustible rubbish.

A portable ashtray can be placed inthe cupholders.


Warning lights, gaugesand indicatorsInstrument clusterDepending on the version, twoinstrument clusters are available:


Baselevel instrument cluster


Midlevel instrument cluster


Overview

O Turn signal 3 85

X Seat belt reminder 3 86

v Airbag and belt tensioners3 86

V Airbag deactivation 3 87

p Charging system 3 87

Z Malfunction indicator light3 87

H Service vehicle soon 3 87

STOP Stop engine 3 87

J System check 3 88

R Brake and clutch system3 88

u Antilock brake system (ABS)3 88

R Gear shifting 3 88

) Lane departure warning3 88

b Electronic Stability Controland Traction Control system3 89

a Electronic Stability Controland Traction Control systemoff 3 89

! Preheating 3 89

% Diesel particle filter 3 89

Y AdBlue 3 89

w Deflation detection system3 90

I Engine oil pressure 3 90

Y o Low fuel 3 90

W o Engine coolant temperaturehigh 3 89

D Autostop 3 90

8 Exterior light 3 90

9 Low beam 3 91

C High beam 3 91

f High beam assist 3 91

> Fog light 3 91

ø Rear fog light 3 91

< Rain sensor 3 91

B Side blind spot alert 3 158

m Cruise control 3 91

ß Speed limiter 3 91

L Traffic sign assistant 3 91

h Door open 3 91

Speedometer

Indicates vehicle speed.


Odometer

The total recorded distance isdisplayed in miles.

Trip odometerThe recorded distance since the lastreset is displayed in the DriverInformation Centre.

Trip odometer counts up to9,999 miles and then restarts at 0.Press L for 2 seconds to reset tripodometer.Two trip odometer pages areselectable in the trip/fuel informationmenu for different trips 3 92.

Tachometer

Displays the engine speed.Drive in a low engine speed range foreach gear as much as possible.

Caution

If the needle is in the red warningzone, the maximum permittedengine speed is exceeded. Engineat risk.


Fuel gauge

Displays the fuel level in the tank.Control indicator o illuminates if thelevel in the tank is low.Never run the fuel tank dry.Because of the fuel remaining in thetank, the top-up quantity may be lessthan the specified fuel tank capacity.

Engine coolant temperaturegauge

Displays the coolant temperature.50 : engine operating temperature

not yet reached90 : normal operating temperature130 : temperature too high

Control indicator o illuminates ifengine coolant temperature is toohigh.

Caution

If engine coolant temperature istoo high, stop vehicle, switch offengine. Danger to engine. Checkcoolant level.

Service displayThe service system informs when tochange the engine oil and filter or avehicle service is required. Based ondriving conditions, the interval atwhich an engine oil and filter changewill be indicated can varyconsiderably.


A required service due is displayed inthe Driver Information Centre forseven seconds after switching on theignition.If no service is required for the next3000 km or more, no serviceinformation appears in the display.If service due is required within thenext 3000 km, the remaining distanceor time duration is indicated forseveral seconds. Simultaneouslysymbol F lights up permamently asreminder.If service due is less than 1000 km,F flashes and then lights uppermanently. Remaining distance ortime duration is indicated for severalseconds.Overdued service is indicated by amessage in the Driver InformationCentre which indicates the overdueddistance. F flashes and then lights uppermanently until service is executed.

Reset of service intervalAfter each service, the serviceindicator must be reset to ensureproper functionality. It isrecommended to seek the assistanceof a workshop.If service is executed by yourself,operate as following:● switch off ignition● press and hold button M or

CHECK● switch on ignition; the distance

indication begins a countdown● when the display indicates =0,

release the button. Symbol Fdisappears

Retrieving service informationTo retrieve the status of the serviceinformation at any time press buttonM or CHECK. The serviceinformation is displayed for a fewseconds.Service information 3 213.

Control indicatorsThe control indicators described arenot present in all vehicles. Thedescription applies to all instrumentversions. Depending on theequipment, the position of the controlindicators may vary. When theignition is switched on, most controlindicators will illuminate briefly as afunctionality test.The control indicator colours mean:red : danger, important reminderyellow : warning, information, faultgreen : confirmation of activationblue : confirmation of activationwhite : confirmation of activation

See all control indicators on differentinstrument clusters 3 79.

Turn signalO illuminates or flashes green.

Illuminates brieflyThe parking lights are switched on.


FlashesA turn signal or the hazard warningflashers are activated.Rapid flashing: failure of a turn signallight or associated fuse, failure of turnsignal light on trailer.Bulb replacement 3 182, Fuses3 189.Turn signals 3 110.

Seat belt reminderSeat belt reminder on all seatsX illuminates or flashes red in theinstrument cluster together with theindication in the roof console for eachseat belt.

● When the ignition is switched on,X in the instrument cluster andthe symbol for the respectiveseat in the roof console comeson, if the seat belt of anyoccupied seat has not beenfastened.

● After running up, X in theinstrument cluster and thesymbol for the respective seat inthe roof console flashes for acertain time together with achime. After a certain time ofdriving X illuminates constantlyuntil the seat belt of the

respective seat has beenfastened or if any passenger hasunfastened the seat belt.

Airbag and belt tensionersv illuminates red.When the ignition is switched on, thecontrol indicator illuminates forapprox. four seconds. If it does notilluminate, does not go out afterfour seconds or illuminates whilstdriving, there is a fault in the airbagsystem. Seek the assistance of aworkshop. The airbags and beltpretensioners may fail to trigger in theevent of an accident.Deployment of the belt pretensionersor airbags is indicated by continuousillumination of v.

9 Warning

Have the cause of the faultremedied immediately by aworkshop.

Belt pretensioners, airbag system3 48, 3 51.


Airbag deactivation

ÓON illuminates yellow.The front passenger airbag isactivated.*OFF illuminates yellow.The front passenger airbag isdeactivated.Airbag deactivation 3 55.

Charging systemp illuminates red.Illuminates when the ignition isswitched on and extinguishes shortlyafter the engine starts.

Illuminates when the engine isrunningStop, switch off engine. Vehiclebattery is not charging. Enginecooling may be interrupted. Thebrake servo unit may cease to beeffective. Seek the assistance of aworkshop.

Malfunction indicator lightZ illuminates or flashes yellow.Illuminates when the ignition isswitched on and extinguishes shortlyafter the engine starts.

Illuminates when the engine isrunningFault in the emission control system.The permitted emission limits may beexceeded.Seek the assistance of a workshopimmediately.

Flashes when the engine isrunningThe engine management system hasa fault that could lead to catalyticconverter damage. Ease up on theaccelerator until the flashing stops.Seek the assistance of a workshopimmediately.

Service vehicle soonH illuminates yellow.Illuminates briefly when the ignition isswitched on.May illuminate together with othercontrol indicators and acorresponding message in the DriverInformation Centre.Seek the assistance of a workshopimmediately.

Stop engineY illuminates red.Illuminates briefly when the ignition isswitched on.


Illuminates together with other controlindicators, accompanied by a warningchime and a corresponding messagein the Driver Information Centre.Stop engine immediately and seekthe assistance of a workshop.

System checkJ illuminates yellow or red.

Illuminates yellowA minor engine fault has beendetected.

Illuminates redA major engine fault has beendetected.Stop engine as soon as possible andseek the assistance of a workshop.

Brake and clutch systemR illuminates red.The brake and clutch fluid level is toolow, when manual parking brake isnot applied 3 179.

9 Warning

Stop. Do not continue yourjourney. Consult a workshop.

Illuminates when the manual parkingbrake is applied and ignition isswitched on 3 144.

Antilock brake system(ABS)u illuminates yellow.Illuminates for a few seconds after theignition is switched on. The system isready for operation when the controlindicator extinguishes.If the control indicator does not go outafter a few seconds, or if it illuminateswhile driving, there is a fault in theABS. The brake system remainsoperational but without ABSregulation.Antilock brake system 3 143.

Gear shifting

R with the number of a higher gear isindicated, when upshifting isrecommended for fuel savingreasons.

Lane departure warning) flashes yellow when the systemrecognises an unintended lanechange.Lane departure warning 3 164.


Electronic Stability Controland Traction Control systemb illuminates or flashes yellow.

IlluminatesA fault in the system is present.Continued driving is possible. Drivingstability, however, may deterioratedepending on road surfaceconditions.Have the cause of the fault remediedby a workshop.

FlashesThe system is actively engaged.Engine output may be reduced andthe vehicle may be brakedautomatically to a small degree.Electronic Stability Control andTraction Control system 3 145.

Electronic Stability Controland Traction Control systemoffn illuminates yellow.The systems are deactivated.

Engine coolant temperatureo illuminates red.

Illuminates when the engine isrunningStop, switch off engine.

Caution

Coolant temperature too high.

Check coolant level immediately3 178.If there is sufficient coolant, consult aworkshop.

Preheating! illuminates yellow.Preheating of Diesel engine isactivated. Only activates whenoutside temperature is low. Start theengine when control indicatorextinguishes.

Diesel particle filter% or H illuminates yellow.

The diesel particle filter requirescleaning.Continue driving until the controlindicator extinguishes.

Illuminates temporarilyStart of saturation of the particle filter.Start cleaning process as soon aspossible by driving at a vehicle speedof at least 40 mph.

Illuminates constantlyIndication of a low additive level. Seekthe assistance of a workshop.Diesel particle filter 3 135.

AdBlueY flashes or illuminates yellow.

Illuminates yellowThe remaining driving range isbetween 600 km and 2400 km.Have the AdBlue® topped-up as soonas possible by a qualified workshop.You can add up to 10 litres ofAdBlue® to its tank.


Flashes yellowThe remaining driving range isbetween 0 and 600 km.Top-up the AdBlue® as soon aspossible to avoid a breakdown by aqualified workshop. You can add upto 10 litres of AdBlue® to its tank.

Deflation detection systemw illuminates or flashes yellow.

IlluminatesTyre pressure loss in one or morewheels. Stop immediately and checktyre pressure.

FlashesFault in system. Consult a workshop.

Engine oil pressureI illuminates red.Illuminates when the ignition isswitched on and extinguishes shortlyafter the engine starts.

Illuminates when the engine isrunning

Caution

Engine lubrication may beinterrupted. This may result indamage to the engine and/orlocking of the drive wheels.

1. Depress clutch.2. Select neutral gear.3. Move out of the flow of traffic as

quickly as possible withoutimpeding other vehicles.

4. Switch off ignition.

9 Warning

When the engine is off,considerably more force is neededto brake and steer.During an Autostop, the brakeservo unit will still be operational.Do not remove key until vehicle isstationary, otherwise the steeringwheel lock could engageunexpectedly.

Check oil level before seekingassistance of a workshop 3 177.

Low fuelo illuminates yellow.Level in fuel tank is too low.Refuelling 3 167.Bleeding the diesel fuel system3 181.

AutostopD illuminates or flashes green.

Illuminates greenEngine is in an Autostop.

Flashes greenAutostop is temporarily unavailable,or Autostop mode is invokedautomatically.Stop-start system 3 131.

Exterior light8 illuminates green.The exterior lights are on 3 106.


High beamC illuminates blue.Illuminated when high beam is on orduring headlight flash 3 107.

High beam assistf illuminates green.The high beam assist is activated,see Adaptive forward lighting 3 108.

Low beam9 illuminates green.Illuminated when low beam is on.

Fog light> illuminates green.The front fog lights are on 3 110.

Rear fog lightø illuminates yellow.The rear fog light is on 3 110.

Rain sensor< illuminates green.

Illuminated when rain sensor positionon wiper stalk is selected.

Side blind spot alertB illuminates green.The system is active.

Cruise controlm illuminates in the DriverInformation Centre.Cruise control 3 146.

Speed limiterß illuminates in the DriverInformation Centre.Speed limiter 3 148.

Traffic sign assistantL displays by the front cameradetected traffic signs in the DriverInformation Centre.Traffic sign assistant 3 146.

Door openh illuminates red.

A door or the tailgate is open.


Information displaysDriver Information CentreThe Driver Information Centre islocated in the instrument cluster.Depending on the version and theinstrument cluster, the DriverInformation Centre is available asBaselevel or Midlevel display.Driver Information Centre indicates:● overall and trip odometer● digital speed indication● trip/fuel information menu● gear shift indication● service information● vehicle and warning messages● driver assistance messages● pop-up messages

Selecting menus and functionsThe menus and functions can beselected via the buttons on the turnsignal lever.

Turn the adjuster wheel to select apage in the Trip/fuel informationmenu.Press SET/CLR to confirm or reset afunction.Vehicle and service messages arepopped up in the Driver InformationCentre if required. Scroll messagesby turning the adjuster wheel.Confirm messages by pressingSET/CLR. Vehicle messages 3 97.

Trip/fuel information menu,Baselevel display

Turn the adjuster wheel to select apage:

Trip odometerThe recorded distance since thereset.Press L for 2 seconds to reset tripodometer.

Average fuel consumptionDisplay of average consumption. Themeasurement can be reset at anytime and starts with a default value.To reset, press SET/CLR for a fewseconds.


Average speedDisplay of average speed. Themeasurement can be reset at anytime.To reset, press SET/CLR for a fewseconds.

Fuel rangeRange is calculated from current fuellevel and current consumption. Thedisplay shows average values.After refuelling, the range is updatedautomatically after a brief delay.When the level in the fuel tank is low,a message appears on the displayand the control indicator o in the fuelgauge illuminates 3 90.

Instantaneous Fuel ConsumptionDisplay of the instantaneousconsumption.

Digital speedDigital display of the instantaneousspeed.

Trip/fuel information menu,Midlevel display

Differerent pages with combinedinformation can be selected.Turn the adjuster wheel to select apage.

Information page:Fuel rangeRange is calculated from current fuellevel and current consumption. Thedisplay shows average values.After refuelling, the range is updatedautomatically after a brief delay.

When the level in the fuel tank is low,a message appears on the displayand the control indicator o in the fuelgauge illuminates 3 90.Instantaneous Fuel ConsumptionDisplay of the instantaneousconsumption.

Trip 1 page:Average speedDisplay of average speed. Themeasurement can be reset at anytime.Average fuel consumptionDisplay of average consumption. Themeasurement can be reset at anytime and starts with a default value.Distance travelledDisplays the current distance for trip1 since the reset.The values of trip 1 page can be resetby pressing SET/CLR for a fewseconds.

Trip 2 page:Average speed


Display of average speed. Themeasurement can be reset at anytime.Average fuel consumptionDisplay of average consumption. Themeasurement can be reset at anytime and starts with a default value.Distance travelledDisplays the current distance for trip2 since a certain reset.The values of trip 2 page can be resetby pressing SET/CLR for a fewseconds.

Digital speed pageDigital display of the instantaneousspeed.

Stop and Start time counterA time counter calculates the timespent in STOP mode during ajourney. It resets to zero every timethe ignition is switched on.

Compass pageDisplays the geographic direction ofdriving.

Blank pageNo trip/fuel information is displayed.

Info displayThe Info-Display is located in theinstrument panel near the instrumentcluster.Depending on the vehicleconfiguration the vehicle has a● Graphic-Info-Display

or● 7'' Colour-Info-Display with

touchscreen functionalityor

● 8'' Colour-Info-Display withtouchscreen functionality

The Info displays can indicate:● time 3 77● outside temperature 3 76● date 3 77● Infotainment system, see

description in the Infotainmentmanual

● indication of rear view camera3 162

● indication of panoramic viewsystem 3 160

● indication of parking assistinstructions 3 150

● navigation, see description in theInfotainment manual

● vehicle and system messages3 97

● settings for vehiclepersonalisation 3 99

Graphic-Info-Display

Press X to switch on the display.Press MENU to select main menupage.


Press èäåé to select a menu page.Press OK to confirm a selection.Press BACK to exit a menu withoutchanging a setting.

7'' Colour-Info-Display

Selecting menus and settingsMenus and settings are accessed viathe display.

Press X to switch on the display.Press ; to display the homepage.Touch required menu display iconwith the finger.Touch a respective icon to confirm aselection.

Touch 9 to return to the next highermenu level.Press ; to return to the homepage.For further information, seeInfotainment manual.Vehicle personalisation 3 99.

8'' Colour-Info-Display

Selecting menus and settingsThere are three options to operate thedisplay:● via buttons below the display● by touching the touchscreen with

the finger● via speech recognition

Button and touch operation

Press X to switch on the display.Press SET to select system settings(units, language, time and date).Press Í to select vehicle settings ordriving functions.Touch required menu display icon ora function with the finger.Confirm a required function orselection by touching.Touch r on the display to exit amenu without changing a setting.For further information, seeInfotainment manual.


Speech recognitionDescription see Infotainment manual.Vehicle personalisation 3 99.

Head-up displayThe Head-up display (HUD) displaysdriver information concerning theinstrument cluster onto a foldableprojection plane on the driver's side.The information appears as an imageprojected from a lense in theinstrument panel onto the projectionplane directly ahead in driver's view.The image appears focused outtoward the front of the vehicle.

Head-up display views:● vehicle speed● speed limits by the traffic sign

assistant● set speed of speed limiter● set speed of cruise control● navigation information.

Adjust position of Head-updisplay image1. Adjust the driver's seat.2. Start the engine.3. Press ä or å to centre the image.

It can only be adjusted up anddown, not side to side.

9 Warning

If the head-up display image is toobright or too high in your field ofview, it may obstruct your viewwhen it is dark outside. Be sure tokeep the head-up display imagedim and placed low in your field ofview.

Adjust brightnessThe Head-up display image willautomatically dim and brighten tocompensate for outside lighting.Brightness can also be adjustedmanually as needed:Press e to brighten the display. Pressæ to dim the display.The image can temporarily light updepending on angel and position ofsunlight.

Switching offPress æ and hold to turn the Head-updisplay off.


LanguagePreferred language can be set invehicle personalisation menu 3 99.

UnitsUnits can be changed in vehiclepersonalisation menu 3 99.

Care of Head-up displayClean the screen of the Head-updisplay with a soft cloth sprayed withglass cleaner. Wipe the lens gently,then dry it.

System limitationsHead-up display may not operateproperly when:● The lens in the instrument panel

is covered by objects or notclean.

● Display brightness is too dim orbright.

● Image is not adjusted to theproper height.

● The driver wears polarizedsunglasses.

If the head-up image is not correct forother reasons, contact a workshop. Vehicle messages

Messages are indicated in the DriverInformation Centre, in some casestogether with a warning and signalchime.

Press SET/CLR on the turn signallever to confirm a message.

Vehicle and service messagesThe vehicle messages are displayedas text. Follow the instructions givenin the messages.


Messages in theColour-Info-DisplaySome important messages mayappear additionally in theInfo-Display. Some messages onlypop-up for a few seconds.

Warning chimesWhen starting the engine or whilstdrivingOnly one warning chime will sound ata time.The warning chime regarding notfastened seat belts has priority overany other warning chime.● If a seat belt is not fastened.● If a door or the tailgate is not fully

closed when starting off.● If a certain speed is exceeded

with parking brake applied.● If cruise control deactivates

automatically.● If a programmed speed or speed

limit is exceeded.

● If a warning message appears inthe Driver Information Centre.

● If the electronic key is not in thepassenger compartment.

● If the parking assist detects anobject.

● If an unintended lane changeoccurs.

● If the diesel particle filter hasreached the maximum fillinglevel.

When the vehicle is parked and/orthe driver's door is opened● With exterior lights on.

During an Autostop● If the driver's door is opened.● If any condition for an autostart is

not fulfilled.

Battery voltageWhen the vehicle battery voltage isrunning low, a warning message willappear in the Driver InformationCentre.

When the vehicle is being driven, theload reduction function temporarilydeactivates certain functions, such asthe air conditioning, the heated rearscreen, heated steering wheel, etc.The deactivated functions arereactivated automatically as soon asconditions permit.


Vehicle personalisationThe vehicle's behaviour can bepersonalised by changing the settingsin the Info-Display.Depending on vehicle equipment andcountry-specific regulations some ofthe functions described below maynot be available.Some functions are only displayed oractive when the engine is running.

Graphic-Info-Display

Press MENU to open the menu page.Use four-way button to operate thedisplay:

Select ˆ Personalisation-configuration, I OK.

Unit settingsSelect Display configuration, I OK.Select Choise of units, I OK.Select desired settings, I OK.

Language settingsSelect Display configuration, I OK.Select Choise of language, I OK.Select desired language, I OK.

Vehicle settingsSelect Define vehicle parameters, IOK.In the corresponding submenus thefollowing settings can be changed:● Lighting.

Follow me home headlamps:Activation and setting durationtime.Welcome lighting: Activation andsetting duration time.

● ComfortAmbient lighting: Activation/Deactivation.

Rear wiper in reverse gear:Activation/Deactivation.

● VehicleUnlocking boot only: Activation/Deactivation.Plip action: Driver/all doors.

● Driving assistanceFatigue Detection system:Activation/Deactivation.Speed recommendation:Activation/Deactivation.

7" Colour-Info-Display

Press ; to open homepage.


Use touch buttons to operate thedisplay:Select Settings.

Unit settingsSelect UnitsChange units for Consumption andDistance and Temperature.Touch 9 repeatedly to return to thehomepage.

Language settingsSelect Language.Change language by touching therespective entry.Touch 9 repeatedly to return to thehomepage.

Vehicle settingsSelect Vehicle.In the corresponding submenus thefollowing settings can be changed:● Collision / Detection Systems

Side Blind Spot Alert: Activatesor deactivates side blind spotalert.

Drowsy Driver Alert: Activates ordeactivates the driverdrowsiness system.Speed Limit Information:Activates or deactivates thespeed limit information by trafficsign recognition.Rear View Camera Guidelines:Activates or deactivates the rearview camera guidelines on theInfo display.

● Comfort and ConvenienceAuto Wipe in Reverse Gear:Activates or deactivatesautomatic switching on of therear window wiper when reversegear is engaged.

● LightingAmbient Lighting: Activates ordeactivates the ambient lightingand adjusts its brightness.Welcome Lighting: Activates ordeactivates and changes theduration of welcome lighting.

Exit Lighting: Activates ordeactivates and changes theduration of exit lighting.

● Remote Lock, Unlock, StartRemote Door Unlock: Changesthe configuration to unlock thedriver's door only or all doorswhen pressing O on the remotecontrol.Unlock boot only: Activates ordeactivates unlocking the tailgateonly when pressing T on theremote control.

Touch 9 repeatedly to return to thehomepage.


8" Colour-Info-Display

Press SET to open settings menu.Use touch buttons to operate thedisplay.

Unit settingsSelect System settings.Change units for Consumption andDistance and Temperature.Confirm with GTouch r repeatedly to exit the menu.

Language settingsSelect Languages.

Change language by touching therespective entry.Confirm with GTouch r repeatedly to exit the menu.

Vehicle settings

Press Í.Select Vehicle settings.In the corresponding submenus thefollowing settings can be changed:● Headlights

Welcome lighting: Activates ordeactivates the function andadjusts its duration.

Guide-me-home lighting:Activates or deactivates thefunction and adjusts its duration.

● ComfortMood lighting: Adjusts thebrightness of the ambientlighting.Rear wiper in reverse: Activatesor deactivates automaticswitching on of the rear windowwiper when reverse gear isengaged.

● Vehicle accessDoor unlock: boot only: Activatesor deactivates unlocking thetailgate only when pressing Ton the remote control.Door unlock: driver only:Changes the configuration tounlock the driver's door only or alldoors when pressing O on theremote control.

● SafetyDriver attention warning:Activates or deactivates thedriver drowsiness system.


Driving functions

Press Í.Select Driving functions.In the corresponding submenus thefollowing settings can be changed:● Park Assist: Activates advanced

park assist, a parking maneuvercan be selected.

● Blind Spot Sensors: Activates ordeactivates side blind spot alert.

● Panoramic view system:Activation/deactivation of thefunction.

Telematics serviceOnStarOnStar is a personal connectivity andservice assistant with integratedWi-Fi hotspot. The OnStar service isavailable 24 hours a day, seven daysa week.NoticeOnStar is not available for allmarkets. For further information,contact your workshop.NoticeIn order to be available andoperational, OnStar needs a validOnStar subscription, functioningvehicle electrics, ignition on, mobileservice and GPS satellite link.

To activate the OnStar services andset up an account, press Z and speakwith an advisor.

Depending on the equipment of thevehicle, the following services areavailable:● Emergency services and support

in the case of a vehiclebreakdown

● Wi-Fi hotspot● Smartphone application● Remote control, e.g. location of

the vehicle, activation of horn andlights, control of central lockingsystem

● Stolen vehicle assistance● Vehicle diagnosticsNoticeThe OnStar module of the vehicle isdeactivated after ten days without anignition cycle. Functions requiring adata connection will be availableagain after switching on the ignition.


OnStar buttons

Privacy buttonPress and hold j until a message isheard to activate or deactivate thetransmission of the vehicle location.Press j to answer a call or to end acall to an advisor.Press j to access the Wi-Fi settings.

Service buttonPress Z to establish a connection toan advisor.

SOS buttonPress [ to establish a priorityemergency connection to a speciallytrained emergency advisor.

Status LEDGreen: The system is ready withactivated transmission of the vehiclelocation.Green flashing: The system is on acall.Red: A problem arose.Off: The system is ready withdeactivated transmission of thevehicle location or the system is instandby mode.Red / green flashing for a short periodof time: The transmission of thevehicle location has beendeactivated.

OnStar services

General servicesIf you need any information e.g.opening hours, points of interest anddestinations or if you need anysupport e.g. in the case of a vehicle

breakdown, a flat tyre and empty fueltank, press Z to establish aconnection to an advisor.

Emergency servicesIn the case of an emergency situation,press [ and talk to an advisor. Theadvisor then contacts emergency orassistance service providers anddirects them to your vehicle.In the case of an accident withactivation of airbags or belttensioners, an automatic emergencycall is established. The advisor isimmediately connected to yourvehicle to see whether help isneeded.NoticeEstablishing an emergency call maynot be possible in areas withoutsufficient network availability or dueto hardware damage during anaccident.

Wi-Fi hotspotThe Wi-Fi hotspot of the vehicleprovides internet connectivity with amaximum speed of 4G/LTE.


NoticeThe Wi-Fi hotspot functionality is notavailable for all markets.

Up to seven devices may beconnected.To connect a mobile device with theWi-Fi hotspot:1. Press j and then select Wi-Fi

settings on the Info-Display. Thesettings displayed include the Wi-Fi hotspot name (SSID),password and connection type.

2. Start a Wi-Fi network search onyour mobile device.

3. Select your vehicle hotspot(SSID) when listed.

4. When prompted, enter thepassword on your mobile device.

NoticeTo change the SSID or password,press Z and talk to an advisor or login to your account.

To switch off the Wi-Fi hotspotfunctionality, press Z to call anadvisor.

Smartphone appWith the My Vauxhall smartphoneapp, some vehicle functions can beoperated remotely.The following functions are available:● Lock or unlock vehicle.● Honk horn or flash lights.● Check fuel level.● Locate vehicle on a map.● Manage Wi-Fi settings.

To operate these functions, downloadthe app from App Store® orGoogle Play™ Store.

Remote controlIf desired, use any phone to call anadvisor, who can remotely operatespecific vehicle functions. Find therespective OnStar phone number onour country-specific website.The following functions are available:● Lock or unlock vehicle.● Provide information on the

vehicle location.● Honk horn or flash lights.

Stolen vehicle assistanceIf the vehicle is stolen, report the theftto the authorities and request OnStarstolen vehicle assistance. Use anyphone to call an advisor. Find therespective OnStar phone number onour country-specific website.OnStar can provide support inlocating and recovering the vehicle.Theft alertWhen the anti-theft alarm system istriggered, a notification is sent toOnStar. You are then informed aboutthis event by text message or email.Restart preventionBy sending remote signals, OnStarcan prevent the vehicle fromrestarting once it has been turned off.

On-demand diagnosticsAt any time e.g. if the vehicle displaysa vehicle message, press Z tocontact an advisor and ask tocomplete a real-time diagnostic checkto directly determine the issue.Depending on the results, the advisorwill provide further support.


Diagnostic reportThe vehicle automatically transmitsdiagnostic data to OnStar whichsends a monthly email report to youand your preferred workshop.NoticeThe workshop notification functioncan be disabled in your account.

The report contains the status of keyoperating systems of the vehicle likeengine, transmission, airbags, ABS,and other major systems. It alsoprovides information on possiblemaintenance items and tyre pressure(only with tyre pressure monitoringsystem).To look at the information in greaterdetail, select the link within the emailand log in to your account.

OnStar settings

OnStar PINTo have full access to all OnStarservices, a four-digit PIN is required.The PIN has to be personalised whenfirst talking to an advisor.To change the PIN, press Z to call anadvisor.

Account dataAn OnStar subscriber has an accountwhere all the data is stored. Torequest a change of the accountinformation, press Z and talk to anadvisor or log in to your account.If the OnStar service is used onanother vehicle, press Z and requestthat the account be transferred to thenew vehicle.NoticeIn any case, if the vehicle is disposedof, sold or otherwise transferred,immediately inform OnStar aboutthe changes and terminate theOnStar service on this vehicle.

Vehicle locationThe vehicle location is transmitted toOnStar when service is requested ortriggered. A message on the Info-Display informs about thistransmission.To activate or deactivate thetransmission of the vehicle location,press and hold j until an audiomessage is heard.

The deactivation is indicated by thestatus light flashing red and green fora short period of time and each timethe vehicle is started.NoticeIf the transmission of the vehiclelocation is deactivated, someservices are no longer available.NoticeThe vehicle location always remainsaccessible to OnStar in the case ofan emergency.

Find the privacy policy in youraccount.

Software updatesOnStar may remotely carry outsoftware updates without furthernotice or consent. These updates areto enhance or maintain safety andsecurity or the operation of thevehicle.These updates may concern privacyissues. Find the privacy policy in youraccount.

106 Lighting

Lighting

Exterior lighting .......................... 106Light switch .............................. 106Automatic light control ............. 107High beam ............................... 107Headlight flash ......................... 107Headlight range adjustment .... 108Daytime running lights ............. 108Adaptive forward lighting ......... 108Hazard warning flashers .......... 109Turn and lane-change signals . 110Front fog lights ......................... 110Rear fog light ........................... 110Parking lights ........................... 111Reversing lights ....................... 111Misted light covers ................... 111

Interior lighting ........................... 111Instrument panel illuminationcontrol ..................................... 111

Interior lights ............................ 112Reading lights .......................... 112Sunvisor lights ......................... 112

Lighting features ........................ 113Centre console lighting ............ 113Entry lighting ............................ 113

Exit lighting .............................. 113Battery discharge protection .... 113 Exterior lighting

Light switch

Turn light switch:AUTO : automatic light control

switches automaticallybetween daytime runninglight and headlight

8 : sidelights9 : headlights

Control indicator 8 3 90.

Tail lightsTail lights are illuminated togetherwith low/high beam and sidelights.

Lighting 107

Automatic light control

When the automatic light controlfunction is switched on and theengine is running, the systemswitches between daytime runninglights and headlights automaticallydepending on the external lightingconditions and information given bythe rain sensor system.Daytime running light 3 108.

Automatic headlight activationDuring poor lighting conditionsheadlights are switched on.

Additionally, headlights are switchedon if the windscreen wipers havebeen activated for several wipes.Adaptive forward lighting 3 108

Tunnel detectionWhen a tunnel is entered headlightsare switched on immediately.

High beam

Push lever to switch from low to highbeam.Pull lever to deactivate high beam.High beam assist 3 108.

Headlight flash

To activate the headlight flash, pulllever.Pulling lever deactivates high beam.

108 Lighting

Headlight range adjustmentManual headlight rangeadjustment

To adapt headlight range to thevehicle load to prevent dazzling: turnthumb wheel ? to required position.0 : front seats occupied1 : all seats occupied2 : all seats occupied and load

compartment laden3 : driver's seat occupied and load

compartment laden

Daytime running lightsDaytime running lights increasesvisibility of the vehicle during daylight.They are switched on automaticallyduring daytime when engine isrunning.The system switches betweendaytime running lights and low beamautomatically, depending on thelighting conditions.

Adaptive forward lightingThe Adaptive forward lightingfunctions are only available with FulllLED headlights.LED headlights for low and high beamensure better visibility under allconditions.Operation is the same as for halogenheadlights.Adaptive forward lighting functionsare active automatically with lightswitch in position AUTO. Adaptiveforward lighting includes followingfunctions:

● cornering lights● high beam assist● automatic headlight levelling

Cornering light

When turning, depending on thesteering angle and the turn signallight, particular LEDs are triggeredwhich illuminate the direction oftravel. It is activated up to a speed of25 mph.

High beam assistThis feature allows high beam tofunction as the main driving light atnight and when vehicle speedexceeds 15 mph.

Lighting 109

It switches automatically to low beamwhen:● The camera or a sensor in the

windscreen detects the lights ofoncoming or preceding vehicles.

● The vehicle speed drops below9 mph.

● It is foggy or snowy.● Driving in urban areas.

If there are no restrictions detected,the system switches back to highbeam.

Activation

Activate this function pressing abutton on the turn and lane changelever. The LED of the buttonilluminates if the high beam assist isactivated. The high beam is switchedon automatically at a speed above15 mph.The green control indicator filluminates continuously when theassist is activated, the blue one 7illuminates when high beam is on.Control indicator f 3 91.

DeactivationDeactivate this function pressing abutton on the turn and lane changelever.If a headlight flash is activated whenthe high beam assist is activated andlow beam is on, the high beam assistwill be deactivated. The systemchanges to high beam.If a headlight flash is activated whenthe high beam assist is activated andhigh beam is on, the high beam assistwill be deactivated. The systemchanges to low beam.To reactivate the high beam assist,flash the headlights again.

Automatic headlight levellingTo prevent oncoming traffic frombeing dazzled, headlight levelling isautomatically adjusted based on theload in the vehicle.

Fault in Adaptive forward lighting-LED systemWhen the system detects a failure inthe Adaptive forward lighting-LEDheadlight system, a warning isdisplayed in the Driver InformationCentre.

Hazard warning flashersOperated by pressing ¨.

110 Lighting

When braking in an emergency, thehazard warning flashers are switchedon automatically depending on theforce of deceleration. They areswitched off automatically the firsttime you accelerate.

Turn and lane-changesignals

lever up : right turn signallever down : left turn signal

If the lever is moved past theresistance point, the turn signal isswitched on constantly. When thesteering wheel moves back, the turnsignal is automatically deactivated.For three flashes, e.g. when changinglanes, press the lever until resistanceis felt and then release.If you forget to cancel the turn andlane-change signals for more thantwenty seconds, the volume of theaudible signal will increase if thespeed is above 40 mph.

Front fog lights

Operated by pressing >.

Light switch in position AUTO:switching on front fog lights will switchheadlights on automatically.

Rear fog light

Operated by pressing ø.Light switch in position AUTO:switching on rear fog light will switchheadlights on automatically.Light switch in position 8: rear foglight can only be switched on withfront fog lights.

Lighting 111

The vehicle rear fog light isdeactivated when towing a trailer or aplug is connected with the socket, e.g. when a bicycle carrier is used.

Parking lights

When the vehicle is parked, theparking lights on one side can beactivated:1. Switch off ignition.2. Move turn signal lever all the way

up (right parking lights) or down(left parking lights).

Confirmed by a signal and thecorresponding turn signal controlindicator.

Reversing lightsThe reversing light comes on whenthe ignition is on and reverse gear isselected.

Misted light coversThe inside of the light housing maymist up briefly in poor, wet and coldweather conditions, in heavy rain orafter washing. The mist disappearsquickly by itself; to help switch on theheadlights.

Interior lightingInstrument panelillumination control

Brightness of the following lights canbe adjusted in position AUTO whenthe light sensor detects nightconditions, or in position 8 or 9:● instrument panel illumination● Info-Display● illuminated switches and

operation elementsTurn thumb wheel A and hold untilthe desired brightness is obtained.

112 Lighting

Interior lightsDuring entry and exit of the vehicle,the front and rear courtesy lightsautomatically switch on and then offafter a delay.NoticeIn the event of an accident withairbag deployment the courtesylights are turned on automatically.

Front courtesy light

Operate rocker switch:w : automatic switching on

and offpress u : onpress v : off

Rear courtesy lightsIlluminate in conjunction with the frontcourtesy light depending on rockerswitch position.

Reading lights

Operated by pressing s and t in thecourtesy lights.

Illustration shows rear courtesy lights.

Sunvisor lightsIlluminates when the cover is opened.

Lighting 113

Lighting featuresCentre console lightingA spotlight integrated in the overheadconsole illuminates the centreconsole when headlights areswitched off.

Entry lightingWelcome lightingSome or all of the following lights areswitched on for a short time byunlocking the vehicle with the radioremote control:● headlights● tail lights● number plate lights● instrument panel light● interior lights

The number of activated lightsdepends on the surrounding lightconditions.The lighting switches off immediatelywhen the ignition is switched on.Starting off 3 17.

This function can be activated ordeactivated in the vehiclepersonalisation.Vehicle personalisation 3 99.The following lights will additionallyswitch on when the driver's door isopened:● illumination of some switches● Driver Information Centre● door pocket lights

Exit lightingThe following lights are switched on ifthe key is removed from the ignitionswitch:● interior lights● instrument panel light

They will switch off automatically aftera delay. This function works only inthe dark. Theatre lighting is activatedif the driver's door is opened duringthis time.

Battery discharge protectionVehicle battery state of chargefunctionThe function guarantees longestvehicle battery life via a generatorwith controllable power output andoptimised power distribution.To prevent discharge of the vehiclebattery when driving, the followingsystems are reduced automatically intwo stages and finally switched off:● auxiliary heater● heated rear window and mirrors● heated seats● fan

In the second stage, a messagewhich confirms the activation of thevehicle battery discharge protectionwill be displayed in the DriverInformation Centre.

Switching off electric lightsTo prevent discharge of the vehiclebattery when the ignition is switchedoff, some interior lights are switchedoff automatically after some time.

114 Climate control

Climate control

Climate control systems ............. 114Heating and ventilation system 114Air conditioning system ........... 115Electronic climate controlsystem .................................... 118

Auxiliary heater ........................ 122Air vents ..................................... 123

Adjustable air vents ................. 123Fixed air vents ......................... 124

Maintenance .............................. 124Air intake ................................. 124Air conditioning regularoperation ................................ 125

Service .................................... 125

Climate control systemsHeating and ventilationsystem

Controls for:● temperature £● air distribution l, M and K● fan speed Z● demisting and defrosting à● heated rear window and exterior

mirrors b● heated seats ß

Temperature £Adjust the temperature by turning£ to the desired temperature.red area : warmerblue area : colder

Heating will not be fully effective untilthe engine has reached normaloperating temperature.

Air distribution l M KPress:l : to windscreen and front door

windowsM : to head area and rear seats via

adjustable front air ventsK : to front and rear foot well and

windscreen

Combinations are possible.

Fan speed ZAdjust the air flow by turning Z to thedesired speed.to the right : increaseto the left : decrease

Climate control 115

Demisting and defrosting thewindows á

● Press á: the air distribution isdirected towards the windscreen.

● Set temperature controller £ towarmest level.

● Set fan speed Z to highest level.● Switch on heated rear window b.● Open side air vents as required

and direct them towards the doorwindows.

Heated rear window and exteriormirrors b3 38

Heated seats ß3 46.

Air conditioning system

Illustration shows functions whichmay not be available for yourparticular vehicle.Controls for:● temperature £● air distribution l, M and K● fan speed Z● demisting and defrosting à● air conditioning A/C● air recirculation 4

● heated rear window and exteriormirrors b

● heated windscreen ,● heated seats ß

Some changes of settings areindicated briefly in the Info-Display.Activated functions are indicated bythe LED in the respective button.

Temperature £Adjust the temperature by turning£ to the desired temperature.red area : warmerblue area : colder

116 Climate control

Heating will not be fully effective untilthe engine has reached normaloperating temperature.

Air distribution l M KPress:l : to windscreen and front door


adjustable front air ventsK : to front and rear foot well and

windscreen

Combinations are possible.

Fan speed ZAdjust the air flow by turning Z to thedesired speed.to the right : increaseto the left : decrease

Air conditioning A/C

Press A/C to switch on cooling.Activation is indicated by the LED inthe button. Cooling is only functionalwhen the engine is running andclimate control fan is switched on.Press A/C again to switch off cooling.The air conditioning system cools anddehumidifies (dries) as soon as theoutside temperature is slightly abovethe freezing point. Thereforecondensation may form and drip fromunder the vehicle.If no cooling or drying is required,switch off the cooling system for fuelsaving reasons.

Activated cooling may inhibitAutostops. Stop-start system 3 131.

Demisting and defrosting thewindows à

● Press à: the air distribution isdirected towards the windscreen.

● Set temperature controller £ towarmest level.

● Switch on air conditioning A/C ifrequired.

● Set fan speed Z to highest level.● Switch on heated rear window b.

Climate control 117

● Switch on heatedwindscreen ,.

● Open side air vents as requiredand direct them towards the doorwindows.

NoticeIf à is pressed while the engine isrunning, an Autostop will be inhibiteduntil à is pressed again.If à is pressed while the engine is inan Autostop, the engine will restartautomatically.

Stop-start system 3 131.

Air recirculation system 4

Press 4 to activate air recirculationmode, LED is indicated.Select air recirculation to assist incooling the interior or in blockingoutside odours or exhaust.Press 4 again to deactivate airrecirculation mode.

9 Warning

The exchange of fresh air isreduced in air recirculation mode.In operation without cooling, theair humidity increases, so thewindows may mist up from inside.The quality of the passengercompartment air deteriorates,which may cause the occupants tofeel drowsy.

In warm and very humid ambient airconditions, the windscreen may mistup from outside when cold air isdirected towards it. If windscreenmists up from outside, activatewindscreen wiper and deactivate l.

Maximum cooling

Briefly open the windows so that hotair can disperse quickly.● Switch on air conditioning A/C.● Press 4 for air recirculation

system on.● Press M for air distribution.● Set temperature control £ to

coldest level.● Set fan speed Z to highest level.● Open all vents.

118 Climate control

Heated rear window, windscreenand exterior mirrors b3 38


Electronic climate controlsystemThe dual zone climate control allowsdifferent temperatures for driver sideand front passenger side.In automatic mode, temperature, fanspeed and air distribution areregulated automatically.

Illustration shows functions whichmay not be available for yourparticular vehicle.Controls for:● temperature on driver side £● MENU enters the Climate setting

menu in the Info-Display● fan speed Z● automatic mode AUTO● temperature on front passenger

side £● cooling A/C● manual air recirculation 4● demisting and defrosting à● heated rear window and exterior

mirrors b● heated windscreen ,● heated seats ß

Activated functions are indicated bythe LED in the respective control.The electronic climate control systemis only fully operational when theengine is running.

Climate settings menu (MENUbutton)

Settings for● air distribution l, M, K● fan speed Z● temperature for driver and

passenger side 19°/21°● dual zone temperature

synchronisation MONO● air conditioning ON/OFF● automatic mode AUTO

can be triggered manually in theClimate setting menu. Press MENU toenter the menu and follow the touchbuttons.

Climate control 119

Climate setting menu can also bedisplayed● by selecting Climate on the 7''

Colour-Info-Display or● by pressing Í and then selecting

Climate from the menu on the 8''Colour-Info-Display.

Automatic mode AUTO

Basic settings for automatic controlwith maximum comfort:● Press AUTO, the air distribution

and fan speed are regulatedautomatically.

● Open all air vents to allowoptimised air distribution inautomatic mode.

● Air conditioning must beactivated for optimal cooling anddemisting. Press A/C to switch onair conditioning. The LED in thebutton indicates activation.

● Set the preselectedtemperatures for driver and frontpassenger using the left and rightcontrol dial. Recommendedtemperature is 22 °C.Temperature is indicated indisplays beside the control dialsand in the climate settings menu.

● Air recirculation mode 4 shouldbe deactivated. Whendeactivated the LED in the buttonis not illuminated.

Manual settingsClimate control system settings canbe changed by activating thefollowing functions.

Fan speed Z

Adjust the air flow by turning controldial Z to the desired speed. Turn leftto decrease or turn right to increase.Fan speed can also be changed bytouch buttons in the climate settingsdisplay. Press MENU to enter themenu.Turning control dial Z anticlockwise:fan and cooling are switched off.

120 Climate control

To return to automatic mode pressAUTO.

Air distribution l, M, K

Press MENU to enter the menu.Touch:l : to windscreen and front door


adjustable air ventsK : to front and rear foot well and

windscreen

To return to automatic air distributionpress AUTO.

Temperature preselection £

Set the preselected temperaturesseparately for driver and frontpassenger to the desired value usingthe left and right control dials. The dialon the passenger side changes thetemperature for the passenger side.The dial on the driver's side changesthe temperature for the driver's side orfor both sides depending onactivation of synchronisation MONOin the climate settings menu. PressMENU to enter the menu.Recommended temperature is 22 °C.Temperature is indicated in displaysbeside the control dials and in theclimate settings menu.

If the minimum temperature Lo is set,the climate control system runs atmaximum cooling, if cooling A/C isswitched on.If the maximum temperature Hi is set,the climate control system runs atmaximum heating.NoticeIf A/C is switched on, reducing theset cabin temperature can cause theengine to restart from an Autostop orinhibit an Autostop.


Dual zone temperaturesynchronisation MONO or SYNCPress MENU to enter the menu.Touch MONO or SYNC to linkpassenger side temperature settingto the driver side.When passenger side control dial willbe adjusted, synchronisation isdeactivated.

Climate control 121

Air conditioning A/C

Press A/C to switch on cooling. TheLED in the button illuminates toindicate activation. Cooling is onlyfunctional when the engine is runningand climate control fan is switched on.Press A/C again to switch off cooling.The air conditioning system cools anddehumidifies (dries) when outsidetemperature is above a specific level.Therefore condensation may formand drip from under the vehicle.If no cooling or drying is required,switch off the cooling system for fuelsaving reasons.

Manual air recirculation 4

Press 4 to activate the airrecirculation mode. The LED in thebutton illuminates to indicateactivation.Press 4 again to deactivaterecirculation mode.

9 Warning

The exchange of fresh air isreduced in air recirculation mode.In operation without cooling, theair humidity increases, so thewindows may mist up from inside.The quality of the passenger

compartment air deteriorates,which may cause the occupants tofeel drowsy.

In warm and very humid ambient airconditions, the windscreen may mistup from outside, when cold air isdirected towards it. If windscreenmists up from outside, activatewindscreen wiper and deactivate l.

122 Climate control

Demisting and defrosting thewindows à

● Press à. The LED in the buttonilluminates to indicate activation.

● Temperature and air distributionare set automatically and the fanruns at high speed.

● Switch on air conditioning bypressing A/C, if required.

● Switch on heated rear window b.● Switch on heated

windscreen ,.● To return to previous mode pressà again, to return to automaticmode press AUTO.

NoticeIf à is pressed while the engine isrunning, an Autostop will be inhibiteduntil à is pressed again.If à is pressed while the engine is inan Autostop, the engine will restartautomatically.


Deactivation of Electronic climatecontrol systemCooling, fan and automatic mode canbe switched off by turning control dialZ anticlockwise.Activation by switching on the fan orpressing AUTO.

Heated rear window, windscreenand exterior mirrors b3 38


Auxiliary heaterAir heaterQuickheat is an electric auxiliary airheater which automatically warms upthe passenger compartment morequickly.

Climate control 123

Air ventsAdjustable air ventsCentre air vents in the instrumentpanel

Direct the flow of air by tilting andswivelling the slats.To close the vent, swivel the slatsinwards.

Outer air vents in the instrumentpanel

Direct the flow of air by tilting andswivelling the slats.To close the vent, swivel the slatsoutwards.

Centre air vent on top of theinstrument panel

Close air flow by turning the thumbwheel to the front.

124 Climate control

Air vent in the glovebox

The air vent can be opened or closedby turning.At least two air vents must be openwhile cooling is on.

9 Warning

Do not attach any objects to theslats of the air vents. Risk ofdamage and injury in case of anaccident.

Fixed air ventsAdditional air vents are locatedbeneath the windscreen and doorwindows and in the foot wells.

MaintenanceAir intake

The air intake in front of thewindscreen in the enginecompartment must be kept clear toallow air intake. Remove any leaves,dirt or snow.

Cabin air filterChange filter regulary for maximumeffect.More frequent passengercompartment air filter replacementmay be needed, if you drive in areaswith heavy traffic, poor air quality,

Climate control 125

areas with high dust levels or whichare sensitive to environmentalallergens.Passenger compartment air filterreplacement may also be needed ifthere is reduced air flow, windowsfogging up, or odors.Your dealer can help to determinewhen it is the right time to replace thefilter.

Air conditioning regularoperationIn order to ensure continuouslyefficient performance, cooling mustbe operated for a few minutes once amonth, irrespective of the weatherand time of year. Operation withcooling is not possible when theoutside temperature is too low.

ServiceFor optimal cooling performance, it isrecommended to annually check theclimate control system, startingthree years after initial vehicleregistration, including:

● functionality and pressure test● heating functionality● leakage check● check of drive belts● cleaning of condenser and

evaporator drainage● performance check● cabin air filter check

126 Driving and operating

Driving andoperating

Driving hints ............................... 127Control of the vehicle ............... 127Steering ................................... 127

Starting and operating ............... 127New vehicle running-in ............ 127Ignition switch positions ........... 127Power button ........................... 128Power saving mode ................. 129Starting the engine .................. 130Overrun cut-off ........................ 131Stop-start system .................... 131Parking .................................... 134

Engine exhaust .......................... 135Diesel particle filter .................. 135Catalytic converter ................... 136AdBlue ..................................... 136

Automatic transmission .............. 139Transmission display ............... 139Selector lever .......................... 139Manual mode ........................... 140Electronic driving programmes 141Fault ........................................ 141Interruption of power supply .... 141

Manual transmission .................. 142Brakes ........................................ 143

Antilock brake system ............. 143Parking brake .......................... 144Brake assist ............................. 144Hill start assist ......................... 144

Ride control systems ................. 145Electronic Stability Control andTraction Control system ......... 145

Driver assistance systems ......... 146Cruise control .......................... 146Speed limiter ........................... 148Parking assist .......................... 150Advanced parking assist ......... 153Side blind spot alert ................. 158Panoramic view system ........... 160Rear view camera ................... 162Lane departure warning .......... 164Driver alert ............................... 165

Fuel ............................................ 166Fuel for petrol engines ............. 166Fuel for diesel engines ............ 167Refuelling ................................ 167Fuel consumption - CO2-Emissions .............................. 168

Trailer hitch ................................ 169General information ................. 169

Driving characteristics andtowing tips .............................. 169

Trailer towing ........................... 170Towing equipment ................... 170

Driving and operating 127

Driving hintsControl of the vehicleNever coast with engine notrunningMany systems will not function in thissituation (e.g. brake servo unit, powersteering). Driving in this manner is adanger to yourself and others.All systems function during anAutostop.Stop-start system 3 131.

Idle boostIf charging of the vehicle battery isrequired due to battery condition, thepower output of the generator mustbe increased. This will be achieved byan idle boost which may be audible.A message appears in the DriverInformation Centre.

PedalsTo ensure the pedal travel isuninhibited, there must be no mats inthe area of the pedals.

Use only floor mats, which fit properlyand are fixed by the retainers on thedriver side.

SteeringIf power steering assist is lostbecause the engine stops or due to asystem malfunction, the vehicle canbe steered but may require increasedeffort.

Starting and operatingNew vehicle running-inDo not brake unnecessarily hard forthe first few journeys.During the first drive, smoke mayoccur because of wax and oilevaporating off the exhaust system.Park the vehicle in the open for awhile after the first drive and avoidinhaling the fumes.During the running-in period, fuel andengine oil consumption may behigher.Additionally, the cleaning process ofthe diesel particle filter may takeplace more often.Diesel particle filter 3 135.Autostop may be inhibited to allowcharging of the vehicle battery.

Ignition switch positionsTurn key:


0 : ignition off: Some functionsremain active until key isremoved or driver's door isopened, provided the ignition wason previously

1 : ignition on power mode: Ignitionis on, diesel engine is preheating.Control indicators illuminate andmost electrical functions areoperable

2 : engine start: Release key afterafter engine has been started

Steering wheel lockRemove key from ignition switch andturn steering wheel until it engages.

9 Danger

Never remove the key fromignition switch during driving asthis will cause steering wheel lock.

Power button

Electronic key must be inside thevehicle.Engine startOperate clutch pedal (manualtransmission) or brake pedal(automatic transmission) and pressStart/Stop. Release button afterstarting procedure begins. Dieselengine starts after preheating.

Ignition on power mode withoutstarting the enginePress Start/Stop without operatingclutch or brake pedal. Controlindicators illuminate and mostelectrical functions are operable.Engine and ignition offPress Start/Stop briefly in each modeor when engine is running and vehicleis stationary. Some functions remainactive until driver's door is opened,provided the ignition was onpreviously.Emergency shut off during drivingPress Start/Stop for five seconds3 130. Steering wheel locks as soonas vehicle is stationary.

Steering wheel lockThe steering wheel lock activatesautomatically when:● The vehicle is stationary.● The ignition has been switched

off.To release steering wheel lock, openand close driver's door and switch onaccessory mode or start the enginedirectly.


9 Warning

If the vehicle battery is discharged,the vehicle must not be towed,tow-started or jump-started as thesteering wheel lock cannot bedisengaged.

Operation on vehicles withelectronic key system in case offailureIf either the electronic key fails or thebattery of the electronic key is weak,the Driver Information Centre maydisplay No Remote Detected orReplace Battery in Remote Key whenyou try to start the vehicle.

Hold the electronic key with buttonsoutside at the marking on the steeringcolumn cover as shown in theillustration.Depress the clutch pedal (manualtransmission) or the brake pedal(automatic transmission or manualtransmission automated) and pressStart/Stop button to start the engine.This option is intended foremergencies only. Replace theelectronic key battery as soon aspossible 3 23.For unlocking or locking the doors,see fault in radio remote control unitor electronic key system 3 24.

Power saving modeThis function manages the duration ofusing certain systems to avoiddischarging of the vehicle battery.After the engine has stopped, somesystems can still be used such as theaudio and telematics system,windscreen wipers, dipped beamheadlamps, courtesy lamps, etc. for atotal maximum time of about fortyminutes.

Changing into power savingmodeWhen a certain discharging status ofthe vehicle battery is achieved, theactive functions are switched instandby mode. A message appears inthe Driver Information Centreindicating Power saving mode.A telephone call being made at thistime will be maintained for around 10minutes with the Bluetooth handsfreesystem of the Infotainment system.


Deactivating power saving modeStandby mode is reactivatedautomatically next time the vehicle isdriven. To use the functionsimmediately, start the engine:● for less than ten minutes to use

the systems for approximatelyfive minutes

● for more than ten minutes to usethe systems for up toapproximately thirty minutes.

Have the engine run for the durationspecified to ensure that the batterycharge is sufficient. Do not repeatedlyand continuously restart the engine inorder to charge the battery.

Starting the engineVehicles with ignition switch

Turn key to position 1 to release thesteering wheel lock.Manual transmission: operate clutchand brake pedal.Automatic transmission: operatebrake pedal and move selector leverto P or N.Do not operate accelerator pedal.Diesel engines: wait until controlindicator ! extinguishes.

Turn key briefly to position 2 andrelease after the engine has beenstarted.Manual transmission: during anAutostop, the engine can be startedby depressing the clutch pedal3 131.Automatic transmission: during anAutostop, the engine can be startedby releasing the brake pedal 3 131.

Vehicles with power button

Manual transmission: operate clutchand brake pedal.


Automatic transmission: operatebrake pedal and move selector leverto P or N.Do not operate accelerator pedal.Press and release Start/Stop: anautomatic procedure operates thestarter with a short delay until theengine is running.Before restarting or to switch off theengine when vehicle is stationary,press Start/Stop once more briefly.Manual transmission: during anAutostop, the engine can be startedby depressing the clutch pedal3 131.Automatic transmission: during anAutostop, the engine can be startedby releasing the brake pedal 3 131.

Emergency shut off during drivingIf the engine needs to be switched offduring driving in case of emergency,press Start/Stop for five seconds.

9 Danger

Switching off the engine duringdriving may cause loss of powersupport for brake and steeringsystems. Assistance systems andairbag systems are disabled.Lighting and brake lights willextinguish. Therefore power downthe engine and ignition whiledriving only when required in caseof emergency.

Starting the vehicle at lowtemperaturesStarting the engine without additionalheaters is possible down to -25 °С fordiesel engines and -30 °C for petrolengines. Required is an engine oilwith the correct viscosity, the correctfuel, performed services and asufficiently charged vehicle battery.With temperatures below -30 °C theautomatic transmission requires awarming phase of approx.five minutes. The selector lever mustbe in position P.

Turbo engine warm-upUpon start-up, engine availabletorque may be limited for a short time,especially when the enginetemperature is cold. The limitation isto allow the lubrication system to fullyprotect the engine.

Overrun cut-offThe fuel supply is automatically cut offduring overrun, i.e. when the vehicleis driven with a gear engaged butaccelerator pedal is released.Depending on driving conditions, theoverrun cut-off may be deactivated.

Stop-start systemThe stop-start system helps to savefuel and to reduce the exhaustemissions. When conditions allow, itswitches off the engine as soon as thevehicle is at a low speed or at astandstill, e.g. at a traffic light or in atraffic jam.


ActivationThe stop-start system is available assoon as the engine is started, thevehicle starts-off and the conditionsas stated below in this section arefulfilled.

Deactivation

Deactivate the stop-start systemmanually by pressing Ò. Thedeactivation is indicated when theLED in the button illuminates.

AutostopVehicles with manual transmissionAn Autostop can be activated at astandstill or at a low speed up to9 mph.Activate an Autostop as follows:● Depress the clutch pedal.● Set the lever to neutral.● Release the clutch pedal.

The engine will be switched off whilethe ignition stays on.Vehicles with automatic transmissionIf the vehicle is at a standstill withdepressed brake pedal, Autostop isactivated automatically.The engine will be switched off whilethe ignition stays on.The stop-start system will be disabledon inclines of 15% or more.

Indication

An Autostop is indicated by controlindicator D.During an Autostop, the heating andbrake performance will bemaintained.

Conditions for an AutostopThe stop-start system checks if eachof the following conditions is fulfilled.● The stop-start system is not

manually deactivated.● The bonnet is fully closed.● The driver's door is closed or the

driver's seat belt is fastened.● The vehicle battery is sufficiently

charged and in good condition.● The engine is warmed up.● The engine coolant temperature

is not too high.


● The engine exhaust temperatureis not too high, e.g. after drivingwith high engine load.

● The ambient temperature isabove -5 °C.

● The climate control systemallows an Autostop.

● The brake vacuum is sufficient.● The self-cleaning function of the

diesel particle filter is not active.● The vehicle was driven at least at

walking speed since the lastAutostop.

Otherwise an Autostop will beinhibited.Certain settings of the climate controlsystem may inhibit an Autostop. SeeClimate control chapter for moredetails 3 115.If an autostop is temporarily notavailable, D flashes green 3 90.New vehicle running-in 3 127.

Vehicle battery discharge protectionTo ensure reliable engine restarts,several vehicle battery dischargeprotection features are implementedas part of the stop-start system.

Power saving measuresDuring an Autostop, several electricalfeatures such as auxiliary electricheater or rear window heating aredisabled or switched to a powersaving mode. The fan speed of theclimate control system is reduced tosave power.

Restart of the engine by the driver

Vehicles with manual transmissionConventional restartAll engines have conventional restart.Depress the clutch pedal withoutdepressing the brake pedal to restartthe engine.On engines with late restart aconventional restart is only possiblewithout depressed brake pedal.

Late restartAll engines have late restart inaddition to conventional restart. Laterestart is only active on gradients upto 5%.● Depress the brake pedal.● Depress the clutch pedal.● Select first gear.● Release the brake pedal to

restart the engine.

Vehicles with automatic transmissionRelease the brake pedal or moveselector lever out of D into N or P torestart the engine.

Restart of the engine by the stop-start systemThe selector lever must be in neutralto enable an automatic restart.If one of the following conditionsoccurs during an Autostop, theengine will be restarted automaticallyby the stop-start system:● The stop-start system is

manually deactivated.● The bonnet is opened.


● The driver's seat belt isunfastened and the driver's dooris opened.

● The engine temperature is toolow.

● The charging level of the vehiclebattery is below a defined level.

● The brake vacuum is notsufficient.

● The vehicle is driven at least atwalking speed.

● The climate control systemrequests an engine start.

● The air conditioning is manuallyswitched on.

If the bonnet is not fully closed, awarning message is displayed in theDriver Information Centre.If an electrical accessory, e.g. aportable CD player, is connected tothe power outlet, a brief power dropduring the restart might be noticeable.

Parking

9 Warning

● Do not park the vehicle on aneasily ignitable surface. Thehigh temperature of theexhaust system could ignite thesurface.

● Always apply the parkingbrake. Activate the manualparking brake without pressingthe release button. Apply asfirmly as possible on a downhillslope or uphill slope. Depressbrake pedal at the same time toreduce operating force.

● Switch off the engine.● If the vehicle is on a level

surface or uphill slope, engagefirst gear or set the selectorlever to position P beforeremoving the ignition key orswitching off ignition onvehicles with power button. Onan uphill slope, turn the frontwheels away from the kerb.

If the vehicle is on a downhillslope, engage reverse gear orset the selector lever to positionP before removing the ignitionkey or switching off ignition onvehicles with power button.Turn the front wheels towardsthe kerb.

● Close the windows.● Remove the ignition key from

the ignition switch or switch offignition on vehicles with powerbutton. Turn the steering wheeluntil the steering wheel lock isfelt to engage.

● Lock the vehicle.● Activate the anti-theft alarm

system.● The engine cooling fans may run

after the engine has beenswitched off 3 176.

Caution

After running at high enginespeeds or with high engine loads,operate the engine briefly at a low


load or run in neutral forapprox. 30 seconds beforeswitching off, in order to protectthe turbocharger.

NoticeIn the event of an accident withairbag deployment, the engine isswitched off automatically if thevehicle comes to a standstill within acertain time.

Emergency operation underextreme cold temperatures

9 Warning

This emergency operation mayonly be carried out in case ofextremely cold temperatures and ifthe vehicle is parked on a levelsurface.

In countries with extreme coldtemperatures it may be necessary topark the vehicle without appliedparking brake.This is an emergency operation toavoid freezing of the parking brake.

Engine exhaust

9 Danger

Engine exhaust gases containpoisonous carbon monoxide,which is colourless and odourlessand could be fatal if inhaled.If exhaust gases enter the interiorof the vehicle, open the windows.Have the cause of the faultrectified by a workshop.Avoid driving with an open loadcompartment, otherwise exhaustgases could enter the vehicle.

Diesel particle filterAutomatic cleaning processThe diesel particle filter system filtersharmful soot particles out of theexhaust gases.The start of saturation of the particlefilter is indicated by the temporaryillumination of % or H,accompanied by a message in theDriver Information Centre.

As soon as the traffic conditionspermit, regenerate the filter by drivingat a vehicle speed of at least 40 mphuntil the control indicatorextinguishes.NoticeOn a new vehicle, the first particlefilter regeneration operations maybe accompanied by a burning smell,which is normal. Followingprolonged operation of the vehicle atvery low speed or at idle, you may,in exceptional circumstances, noticethe emission of water vapour at theexhaust on acceleration. This doesnot affect the behaviour of thevehicle or the environment.

Cleaning process not possibleIf % or H stays on, accompaniedby an audible signal and a message,this indicates that the particle filteradditive level is too low.The reservoir must be topped-upwithout delay. Seek the assistance ofa workshop.


Catalytic converterThe catalytic converter reduces theamount of harmful substances in theexhaust gases.

Caution

Fuel grades other than those listedon pages 3 166, 3 222 coulddamage the catalytic converter orelectronic components.Unburnt petrol will overheat anddamage the catalytic converter.Therefore avoid excessive use ofthe starter, running the fuel tankdry and starting the engine bypushing or towing.

In the event of misfiring, unevenengine running, a reduction in engineperformance or other unusualproblems, have the cause of the faultrectified by a workshop as soon aspossible. In an emergency, drivingcan be continued for a short period,keeping vehicle speed and enginespeed low.

AdBlueGeneral informationThe selective catalytic reduction(BlueInjection) is a method tosubstantially reduce the nitrogenoxides in the exhaust emission. Thisis achieved by injecting a DieselExhaust Fluid into the exhaustsystem. The ammonia released bythe fluid reacts with nitrous gases(NOx) from the exhaust and turns itinto nitrogen and water.The designation of this fluid isAdBlue®. It is a non-toxic, non-flammable, colourless and odourlessfluid which consists of 32% urea and68% water.

9 Warning

Avoid contact of your eyes or skinwith AdBlue.In case of eye or skin contact,rinse off with water.

Caution

Avoid contact of the paintwork withAdBlue.In case of contact, rinse off withwater.

AdBlue freezes at a temperature ofapprox. -11 °C. As the vehicle isequipped with an AdBlue pre-heater,the emissions reduction at lowtemperatures is ensured. The AdBluepre-heater works automatically.

Level warningsThe AdBlue consumption isapproximately 0.7 litres per600 miles. The consumption can behigher depending on drivingbehaviour (e.g. high load or towing).Depending on the calculated range ofAdBlue, different messages aredisplayed in the Driver InformationCentre. The messages and therestrictions are a legal requirement.


The first possible warning messageappears at an AdBlue range below1500 miles, shows up at each startand each 190 miles range reduction:Top up AdBlue: Starting impossible in1500 miAdditionally, control indicator Yilluminates continuously and a chimesounds with every message pop-up.At an AdBlue range below 380 miles,the following warning message isbeing displayed, shows up at eachstart and each 12 miles rangereduction:Top up AdBlue: Starting impossible in380 miAdditionally, control indicator Yflashes continuously and a chimesounds with every message pop-up.NoticeIn case of high AdBlue consumption,the Driver Information Centre maydisplay this warning without theprevious warning stages.

The last warning level is enteredwhen the AdBlue tank is empty.Restart of the engine is not possible.

The following warning message isbeing displayed and cannot bedismissed:Top up AdBlue: Starting impossibleAdditionally, control indicator Yflashes continuously and enginecannot be restarted until AdBlue tankis being filled with at least 5 litres.

High emission warningsIf the exhaust emission rises above acertain value, warnings similar to therange warnings will be displayed inthe Driver Information Centre.Requests to have the exhaust systemchecked and finally theannouncement of the prevention ofan engine restart are displayed.These restrictions are a legalrequirement.Consult a workshop for assistance.

Refilling AdBlue

Caution

Only use AdBlue that complieswith European standardsDIN 70 070 and ISO 22241-1.Do not use additives.Do not dilute AdBlue.Otherwise the selective catalyticreduction system could bedamaged.

NoticeWhenever a filling pump with anozzle for passenger cars is notavailable at a filling station, use onlyAdBlue bottles or canisters with asealed refill adapter for refilling, toprevent splashback and overspill,and in order to ensure that the fumesfrom the tank are captured and donot emerge. AdBlue in bottles orcanisters is available in many filling


stations and can be purchased e.g.at Vauxhall dealers and other retailoutlets.Since AdBlue has a limiteddurability, check the date of expirybefore refilling.NoticeWhen AdBlue-tank is empty, refill atleast five litresto ensure that the newAdBlue level is being detected.In case AdBlue refill is notsuccessfully detected:1. Continuously drive the vehicle

for ten minutes making sure thatvehicle speed is always higherthan 12 mph.

2. If AdBlue refill is detectedsuccessfully, AdBlue supply-driven warnings or limitations willdisappear.

If AdBlue refill is still not detected,seek the assistance of a workshop.If AdBlue must be refilled attemperatures below -11 °C, therefilling of AdBlue may not bedetected by the system. In this

event, park the vehicle in a spacewith a higher ambient temperatureuntil AdBlue is liquified.NoticeWhen unscrewing the protective capfrom the filler neck, ammonia fumesmay emerge. Do not inhale as thefumes have a pungent smell. Thefumes are not harmful by inhalation.

It is recommended to fill the AdBluetank completely.The vehicle must be parked on a levelsurface.The filler neck for AdBlue is locatedbehind the fuel filler flap, which islocated at left rear side of the vehicle.The fuel filler flap can only be openedif the vehicle is unlocked.1. Remove key from ignition switch.2. Close all doors to avoid ammonia

fumes entering the interior of thevehicle.

3. Release the fuel filler flap bypushing the flap 3 167.

4. Unscrew protective cap from thefiller neck.

5. Open AdBlue canister.6. Mount one end of the hose on the

canister and screw the other endon the filler neck.

7. Lift the canister until it is empty, oruntil the flow from the canister hasstopped. This can take up to fiveminutes.

8. Place the canister on the groundto empty the hose, wait 15seconds.


9. Unscrew the hose from the fillerneck.

10. Mount the protective cap and turnclockwise until it engages.

NoticeDispose of AdBlue canisteraccording to environmentalrequirements. Hose can be reusedafter flushing with clear water beforeAdBlue dries out.

Automatic transmissionThe automatic transmission permitsautomatic gearshifting (automaticmode) or manual gearshifting(manual mode).Manual shifting is possible in manualmode by tapping the selector lever to+ or - 3 140.

Transmission display

The mode or selected gear is shownin the Driver Information Centre.In automatic mode, the drivingprogramme is indicated by D.

In manual mode, M and the numberof the selected gear is indicated.R indicates reverse gear.N indicates neutral position.P indicates park position.

Selector lever

Move the selector lever in the shiftinggate as shown in the illustrationabove.


P : park position, wheels are locked,engage only when the vehicle isstationary and the parking brakeis applied

R : reverse gear, engage only whenthe vehicle is stationary

N : neutralD : automatic modeM : manual mode< : upshift in manual mode] : downshift in manual mode

The selector lever is locked in P andcan only be moved when the ignitionis on and the brake pedal is applied.The engine can only be started withthe lever in position P or N. Whenposition N is selected, press the brakepedal or apply the parking brakebefore starting.Do not accelerate while engaging agear. Never depress the acceleratorpedal and brake pedal at the sametime.When a gear is engaged, the vehicleslowly begins to creep when thebrake is released.

Engine brakingTo utilise the engine braking effect,select a lower gear in good time whendriving downhill, see manual mode.

Rocking the vehicleRocking the vehicle is onlypermissible if the vehicle is stuck insand, mud or snow. Move the selectorlever between D and R in a repeatpattern. Do not race the engine andavoid sudden acceleration.

ParkingApply the parking brake and engageP.

Manual mode

Move selector lever out of position Dtowards the left in position M.Tap selector lever upwards + to shiftto a higher gear.Tap the selector lever downwards - toshift to a lower gear.If a higher gear is selected whenvehicle speed is too low, or a lowergear when vehicle speed is too high,the shift is not executed. This cancause a message in the DriverInformation Centre.


In manual mode, no automaticshifting to a higher gear takes placeat high engine revolutions.

Gear shift indicationR with the number of a higher gear isindicated, when upshifting isrecommended for fuel savingreasons.Shift indication appears only inmanual mode.

Electronic drivingprogrammes● Following a cold start, the

operating temperatureprogramme increases enginespeed to quickly bring thecatalytic converter to the requiredtemperature.

● Special programmesautomatically adapt the shiftingpoints when driving up inclines ordown hills.

● In snowy or icy conditions or onother slippery surfaces, theelectronic transmission control

enables the driver to selectmanually first, second or thirdgear for starting off.

KickdownPressing down the accelerator pedalbeyond the kickdown detent will leadto maximum accelerationindependent of selected drivingmode. The transmission shifts to alower gear depending on enginespeed.

FaultIn the event of a fault a message isdisplayed in the Driver InformationCentre. Vehicle messages 3 97.Electronic transmission controlenables only third gear. Thetransmission no longer shiftsautomatically.Do not drive faster than 62 mph.Have the cause of the fault remediedby a workshop.

Interruption of power supplyIn the event of an interruption ofpower supply, the selector levercannot be moved out of the Pposition. The ignition key cannot beremoved from the ignition switch.If the vehicle battery is discharged,start the vehicle using jump leads3 206.If the vehicle battery is not the causeof the fault, release the selector lever.1. Apply the parking brake.2. Release the selector lever trim

from the centre console. Pokewith a finger into the leathersocket below the selector leverand push the trim upwards.


3. Push down the button and movethe selector lever out of P. Havethe cause of the power supplyinterruption remedied by aworkshop.

4. Mount the selector lever trim ontothe centre console and refit.

Manual transmission

To engage reverse on 5-speedtransmission, depress the clutchpedal and move the selector lever tothe right and rear.

To engage reverse on 6-speedtransmission, depress the clutchpedal, pull the ring under the selectorlever and move the selector leverquite to the left and front.If the gear does not engage, set thelever to neutral, release the clutchpedal and depress again; then repeatgear selection.Do not slip the clutch unnecessarily.When operating, depress the clutchpedal completely. Do not use thepedal as a foot rest.


When clutch slip is detected for aspecific time, the engine power will bereduced. A warning is displayed in theDriver Information Centre. Releasethe clutch.

Caution

It is not advisable to drive with thehand resting on the selector lever.

Gear shift indication 3 88.Stop-start system 3 131.

BrakesThe brake system comprises twoindependent brake circuits.If a brake circuit fails, the vehicle canstill be braked using the other brakecircuit. However, braking effect isachieved only when the brake pedalis depressed firmly. Considerablymore force is needed for this. Thebraking distance is extended. Seekthe assistance of a workshop beforecontinuing the journey.When the engine is not running, thesupport of the brake servo unitdisappears once the brake pedal hasbeen depressed once or twice.Braking effect is not reduced, butbraking requires significantly greaterforce. It is especially important to bearthis in mind when being towed.Control indicator R 3 88.

Antilock brake systemAntilock brake system (ABS)prevents the wheels from locking.

ABS starts to regulate brake pressureas soon as a wheel shows a tendencyto lock. The vehicle remainssteerable, even during hard braking.ABS control is made apparentthrough a pulse in the brake pedaland the noise of the regulationprocess.For optimum braking, keep the brakepedal fully depressed throughout thebraking process, despite the fact thatthe pedal is pulsating. Do not reducethe pressure on the pedal.After starting off, the system performsa self-test which may be audible.

Control indicator u 3 88.

Adaptive brake lightDuring full braking, all three brakelights flash for the duration of ABScontrol.


Fault

9 Warning

If there is a fault in the ABS, thewheels may be liable to lock dueto braking that is heavier thannormal. The advantages of ABSare no longer available. Duringhard braking, the vehicle can nolonger be steered and mayswerve.

Have the cause of the fault remediedby a workshop.

Parking brake

9 Warning

Before leaving the vehicle, checkparking brake status. Controlindicator R must illuminateconstantly.

Manual parking brake

9 Warning

Always apply parking brake firmlywithout operating the releasebutton, and apply as firmly aspossible on a downhill or uphillslope.To release the parking brake, pullthe lever up slightly, press therelease button and fully lower thelever.To reduce the operating forces ofthe parking brake, depress thefoot brake at the same time.

Control indicator R 3 88.

Brake assistIf brake pedal is depressed quicklyand forcefully, maximum brake forceis automatically applied.Operation of brake assist mightbecome apparent by a pulse in thebrake pedal and a greater resistancewhen depressing the brake pedal.Maintain steady pressure on thebrake pedal as long as full braking isrequired. Maximum brake force isautomatically reduced when brakepedal is released.

Hill start assistThe system helps prevent unintendedmovement when driving away oninclines.When releasing the brake pedal afterstopping on an incline, brakes remainon for further two seconds. Thebrakes release automatically as soonas the vehicle begins to accelerate.


Ride control systemsElectronic Stability Controland Traction Control systemElectronic Stability Control improvesdriving stability when necessary,regardless of the type of road surfaceor tyre grip.As soon as the vehicle starts toswerve (understeer/oversteer),engine output is reduced and thewheels are braked individually.Electronic Stability Control operatesin combination with the TractionControl system. It prevents the drivenwheels from spinning.The Traction Control system is acomponent of the Electronic StabilityControl.Traction Control improves drivingstability when necessary, regardlessof the type of road surface or tyre grip,by preventing the driven wheels fromspinning.As soon as the driven wheels starts tospin, engine output is reduced andthe wheel spinning the most is braked

individually. This considerablyimproves the driving stability of thevehicle on slippery road surfaces.

Electronic Stability Control andTraction Control are operational aftereach engine start as soon as thecontrol indicator b extinguishes.When Electronic Stability Control andTraction Control operate, b flashes.

9 Warning

Do not let this special safetyfeature tempt you into taking riskswhen driving.Adapt speed to the roadconditions.

Control indicator b 3 89.

Deactivation

Electronic Stability Control andTraction Control can be deactivated,everytime it is required: press a.Control indicator a illuminates.Control indicator a 3 89.A status message appears in theDriver Information Centre whenElectronic Stability Control TractionControl are deactivated.Electronic Stability Control andTraction Control are reactivated bypressing the a button again, by


applying the brake or in the case thatthe vehicle is driven faster than 30mph.a extinguishes when ElectronicStability Control and Traction Controlare reactivated.Electronic Stability Control andTraction Control are also reactivatedthe next time the ignition is switchedon.

FaultIf there is a fault in the system, thecontrol indicator b illuminatescontinuously and a message appearsin the Driver Information Centre. Thesystem is not operational.Have the cause of the fault remediedby a workshop.

Driver assistancesystems

9 Warning

Driver assistance systems aredeveloped to support the driverand not to replace the driver'sattention.The driver stays in full control ofthe vehicle and accepts fullresponsibility when driving thevehicle.When using driver assistancesystems, always take careregarding the current trafficsituation and follow applicabletraffic rules.

Cruise controlThe cruise control can store andmaintain speeds above 25 mph.Additionally at least the third gearmust be engaged on manualtransmission, on automatic

transmission position D or the secondor a higher gear in position M must beselected.Deviations from the stored speedsmay occur when driving uphill ordownhill.The system maintains the vehiclespeed at the preset speed by thedriver, without any action on theaccelerator pedal.The preset speed can be exceededtemporarily by pressing theaccelerator pedal.The status and preset speed isdisplayed in the Driver InformationCentre.Do not use the cruise control if it is notadvisable to maintain a constantspeed.


Switching on

Press m on the steering wheel:symbol m and Pause are indicated inthe Driver Information Centre. Thesystem is still not active.

Activation

Setting speed by the driver

Accelerate to the desired speed andpress toggle switch once briefly toRES/+ or SET/-. The current speed isstored and maintained. Acceleratorpedal can be released.The preset speed can then bechanged by pressing toggle switch toRES/+ to increase or SET/- todecrease the speed. Short presschanges speed in small steps, longpress in large steps.

Speed value is indicated in the DriverInformation Centre.

Adopting speed by the traffic signassistantThe intelligent speed adaptationinforms the driver when a speed limitis detected by the traffic signassistant. If the cruise control isactive, the recognised speed limit willbe displayed in the Driver InformationCentre and "MEM" illuminates.


Press MEM on the steering wheel torequest saving of the suggestedspeed.Press MEM on the steering wheelonce more to confirm and save thenew speed setting.This speed is the new value for thecruise control.This function can be deactivated oractivated in the personalisationmenu, 3 99.

Exceeding the set speedVehicle speed can be increased bydepressing the accelerator pedal.When the accelerator pedal isreleased, the previously stored speedis resumed.

DeactivationPress Ñ: cruise control is in pausemode, Pause is indicated. Thevehicle is driven without cruisecontrol.Cruise control is deactivated, but notswitched off. Last stored speedremains in memory for later speedresume.Cruise control is deactivatedautomatically:● The brake pedal is depressed.● The clutch pedal is depressed.● Vehicle speed is below 25 mph.● The Traction Control system or

Electronic Stability Control isoperating.

● The selector lever is in N.

Resume stored speedPress toggle switch to RES/+ or Ñ ata speed above 25 mph. The storedspeed will be obtained.

Switching offPress m: the cruise control mode isdeselected and the cruise controlindication extinguishes in the DriverInformation Centre.Pressing ß to activate the speedlimiter deactivates cruise control.Switching off the ignition cancels anyprogrammed speed value.

FaultIn the event of a cruise control fault,the speed is cleared resulting inflashing of the dashes.

Speed limiterThe speed limiter prevents thevehicle exceeding a preset maximumspeed.The maximum speed can be set atspeeds above 18 mph.


The driver can accelerate the vehicleup to the preset speed. Deviationsfrom the limited speed may occurwhen driving downhill.The preset speed can be exceededtemporarily by pressing theaccelerator pedal firmly.The status and preset speed limit isdisplayed in the Driver InformationCentre.

Switching on

Press ß, symbol ß and Pause areindicated in the Driver InformationCentre. The system is still not active.

Activation

Setting speed by the driver

Press toggle switch once briefly toRES/+ or SET/-.Following the preset speed can be setby pressing toggle switch to RES/+ toincrease or SET/- to decrease thedesired maximum speed. Short presschanges preset speed in small steps,long press in large steps. Speedvalue is indicated in the DriverInformation Centre.

Press Ñ to activate speed limiter.

Adopting speed by the traffic signassistantThe intelligent speed adaptationinforms the driver when a speed limitis detected by the traffic signassistant. If the speed limiter is active,the recognised speed limit will bedisplayed in the Driver InformationCentre and "MEM" illuminates.


Press MEM on the steering wheel torequest saving of the suggestedspeed.Press MEM on the steering wheelonce more to confirm and save thenew speed setting.This speed is the new value for thespeed limiter.This function can be deactivated oractivated in the personalisationmenu, 3 99.

Exceeding the speed limitIn the event of an emergency, it ispossible to exceed the speed limit bya "kickdown". In this case the presetspeed value flashes.Release the accelerator pedal andthe speed limiter function isreactivated once a speed lower thanthe limit speed is obtained.

DeactivationPress Ñ: speed limiter is in pausemode, Pause is indicated. Thevehicle is driven without speed limit.

Speed limiter is deactivated, but notswitched off. Last stored speedremains in memory for later speedresume.

Resume limit speedPress Ñ. The stored speed limit willbe obtained.

Switching offPress ß, the speed limiter mode isdeselected and the speed limitindication extinguishes in the DriverInformation Centre.Pressing m to activate cruise controldeactivates speed limiter.The preset speed remains in thememory when the ignition is switchedoff.

FaultIn the event of a speed limiter fault,the speed is cleared resulting inflashing of the dashes.The speed limiter may not operatecorrectly if traffic signs do not complywith the Vienna Convention on Road

Signs and Signals (WienerÜbereinkommen überStraßenverkehrszeichen).

Parking assistGeneral informationWhen attaching a trailer or bikecarrier to the trailer hitch, the parkingassist is deactivated.

9 Warning

The driver bears full responsibilityfor the parking manoeuvre.Always check the surroundingarea when driving backwards orforwards while using parkingassist system.

Rear parking assistThe rear parking assist makesparking easier by measuring thedistance between the vehicle andrear obstacles. It informs and warnsthe driver by giving acoustic signalsand display indication.


The system operates with ultrasonicparking sensors in the rear bumper.

ActivationRear parking assist is activated whenreverse gear is engaged and ignitionis switched on.The system is ready to operate whenthe LED in the parking assist buttonr OFF does not illuminate.

IndicationThe system warns the driver withacoustic signals against potentiallyhazardous obstacles behind thevehicle in a distance range up to50 cm while reverse gear is engaged.

Depending on which side of thevehicle is closer to an obstacle, youwill hear acoustic warning signals inthe vehicle on the respective side.The interval between the soundsbecomes shorter as the vehicle getscloser to that obstacle. When thedistance is less than approx. 30 cm,the sound is continuous.

Additionally, the distance to rearobstacles is displayed by changingdistance lines in the Info Display3 94. When the obstacle is very close,9 for Danger is displayed in thescreen.

Deactivation

The system is switched off whenreverse gear is disengaged. Pressr OFF to deactivate the systemmanually. The LED in the buttonilluminates when the system isdeactivated.

Front-rear parking assistThe front-rear parking assistmeasures the distance between thevehicle and obstacles in front andbehind the vehicle. It informs andwarns the driver by giving acousticsignals and display indication.


It uses two different acoustic warningsignals for the front and rearmonitoring areas, each with adifferent tone frequency.

The system operates with ultrasonicparking sensors in the rear and frontbumper.

ActivationIn addition to the rear parking assist,the front parking assist is triggeredwhen an obstacle is detected in frontand the speed of the vehicle is stillbelow 6 mph.

The system is ready to operate whenthe LED in the parking assist buttonr does not illuminate.When the system is deactivated, theLED in the button illuminates.

IndicationThe system warns the driver withacoustic signals against potentiallyhazardous obstacles in front of thevehicle and behind the vehicle.Depending on which side of thevehicle is closer to an obstacle, youwill hear acoustic warning signals inthe vehicle on the respective side.The interval between the soundsbecomes shorter as the vehicle gets

closer to that obstacle. When thedistance is less than approx. 30 cm,the sound is continuous.

Additionally, the distance to rear andfront obstacles is displayed bychanging distance lines in the Info-Display 3 94.

DeactivationThe system is deactivatedautomatically when vehicle speedexceeds 6 mph or if the vehicle stopsfor more than three seconds in aforward gear or if no further obstaclesare detected.


Manual deactivation is also possibleby pressing the parking assist buttonr.When the system is deactivatedmanually, the LED in the buttonextinguishes and a message pops-upin the Driver Information Centre.After a manual deactivation, the front-rear parking assist is activated againif r is pressed or if reverse gear isengaged.

System limitationsIn the event of a fault or if the systemdoes not work temporarily, e.g.because of high external noise levelor other interference factors, Servicein the cluster instrument illuminates.A message is indicated in the DriverInformation Centre.

9 Warning

Under certain circumstances,various reflective surfaces onobjects or clothing as well as

external noise sources may causethe system to fail to detectobstacles.Special attention must be paid tolow obstacles which can damagethe lower part of the bumper.

Caution

Performance of the system can bereduced when sensors arecovered, e.g. by ice or snow.Performance of the parking assistsystem can be reduced due toheavy loading.Special conditions apply if thereare taller vehicles in the vicinity(e.g. off-road vehicles, mini vans,vans). Object identification andcorrect distance indication in theupper part of these vehiclescannot be guaranteed.Objects with a very small reflectioncross-section, e.g. objects ofnarrow size or soft materials, maynot be detected by the system.

Parking assist systems do notdetect objects outside thedetection range.

Advanced parking assist

9 Warning

The driver bears full responsibilityfor accepting the parking slotsuggested by the system and theparking manoeuvre.Always check the surroundingarea in all directions when usingthe advanced parking assist.

The advanced parking assistmeasures a suitable parking slotwhile passing, calculates thetrajectory and automatically steersthe vehicle while parking.Advanced parking assist providesassistance for the followingmanoeuvres:● Entry into a parallel parking slot.● Entry into a perpendicular

parking slot.● Exit from a parallel parking slot.


The driver must control acceleration,braking and gear shifting, whilesteering is done automatically. Thedriver can take control at any time bygripping the steering wheel.It may be necessary to move forwardsand backwards more than once.Instructions are given in the Info-Display 3 94.Advanced parking assist can only beactivated when driving forwards.

Advanced parking assist is alwayscombined with front-rear parkingassist.

The system has six ultrasonic parkingsensors each in both the rear andfront bumper.

Entry into a parallel parking slot

Activation7'' Colour-Info-Display: to search for aparking slot, activate the system byselecting Park Assist on thehomepage of the touch screen. Thenselect Enter parallel parking space.8'' Colour-Info-Display: to search for aparking slot, activate the system bypressing Í. Select Driving functionson the touch screen and then ParkAssist. Select Enter parallel parkingspace.$ illuminates in the instrument clusterto confirm the function.Slow down the vehicle speed below12 mph.Select parking side by switching onturn signal indicator on the respectiveside.The allowed parallel distancebetween the vehicle and a row ofparked cars is between 0.5 metresand 1.5 metres.

The system will not identify slots thatare clearly smaller or larger than thevehicle.

When a free slot is detected, a visualfeedback on the Colour-Info-Displayand a first acoustic signal is given.Drive slowly forwards. When thesecond acoustic signal is given, stopthe vehicle, select reverse gear,release the steering wheel and startmoving without exceeding 4 mph.


Move forwards and backwards whileobserving the warnings of the Parkingassist until the end of manoeuvre isindicated. When finished, $extinguishes in the instrument cluster.

Entry into a perpendicular parkingslot

Activation7'' Colour-Info-Display: to search for aparking slot, activate the system byselecting Park Assist on thehomepage of the touch screen. Thenselect Enter perpendicular parkingspace.

8'' Colour-Info-Display: when searchfor a parking slot, activate the systemby pressing Í. Select Drivingfunctions on the touch screen andthen Park Assist. Select Enter bayparking space.$ illuminates in the instrument clusterto confirm the function.Slow down the vehicle speed below12 mph.Select parking side by switching onturn signal indicator on the respectiveside.The allowed parallel distancebetween the vehicle and a row ofparked cars is between 0.5 metresand 1.5 metres.When several successive slots arefound, the vehicle will be directedtowards the last one.

When a free slot is detected, a visualfeedback on the Colour-Info-Displayand an acoustic signal is given. Stopthe vehicle, select reverse gear,release the steering wheel and startmoving without exceeding 4 mph.


Move forwards and backwards asinstructed by observing the warningsof the Parking assist and payingattention to the acoustic signals untilthe end of manoeuvre is indicated.When finished, $ extinguishes in theinstrument cluster.During the parking manoeuvre, thesystem is automatically deactivatedonce the rear of the vehicle is within50 cm of an obstacle.

Exiting a parallel parking slot

Activation7'' Colour-Info-Display: when exiting aparallel parking slot, activate thesystem by selecting Park Assist onthe homepage of the touch screen.Then select Exit parallel parkingspace.8'' Colour-Info-Display: when exiting aparallel parking slot, activate thesystem by pressing Í. Select Drivingfunctions on the touch screen andthen Park Assist. Select Exit parallelparking space.Select exit side by switching on therespective turn signal indicator.Engage reverse or forward gear,release the steering wheel and startmoving without exceeding 3 mph.

Move forwards and backwards whileobserving the warnings of the Parkingassist until the end of manoeuvre isindicated. The manoeuvre iscomplete when the vehicle's frontwheels are out of the parking slot and$ extinguishes in the instrumentcluster.After deactivation check control overthe vehicle.


Display indicationThe instructions on the display show:● General hints and warning

messages.● The demand to stop the vehicle,

when a parking slot is detected.● The direction of driving during the

parking manoeuvre.● The demand to shift into reverse

or first gear.● The demand to stop or to drive

slowly.● The successful completion of the

parking manoeuvre indicated bya pop-up symbol and a chime.

● The cancelling of a parkingmanoeuvre.

DeactivationThe current park assist manoeuvre iscancelled via the button to return tothe previous screen in the Colour-Info-Display. To deactivate thesystem completely, press r Off inthe centre console.

The system is deactivatedautomatically:● if the ignition is switched off● if stalling the engine● if no manoeuvre is started within

5 minutes of selection of the typeof manoeuvre

● after a prolonged stop of thevehicle during a manoeuvre

● if the electronic stability control(ESC) is triggered

● if the speed of the vehicleexceeds the stated limit

● when the driver interruptsmovement of the steering wheel

● after 4 manoeuvre cycles● on opening the driver's door● if one of the front wheels

encounters an obstacle● parking manoeuvre successfully

endedDeactivation by the driver or by thesystem during manoeuvring will beindicated on the display. Additionally,an acoustic signal sounds.

The system is switched offautomatically when towing aelectrically connected trailer.Contact your dealer to switch off thesystem for a prolonged period.

FaultIn the event of a fault, $ flashes for afew seconds, accompanied by anacoustic signal. If the fault occursduring the use of the system, $extinguishes.In the event of a fault in the powersteering, c flashes in the instrumentpanel, accompanied by a message.

9 Warning

Under certain circumstances,various reflective surfaces onobjects or clothing as well asexternal noise sources may causethe system to fail to detectobstacles.Special attention must be paid tolow obstacles which can damagethe lower part of the bumper.


Caution

Performance of the system can bereduced when sensors arecovered, e.g. by ice or snow.Performance of the parking assistsystem can be reduced due toheavy loading.Special conditions apply if thereare taller vehicles in the vicinity(e.g. off-road vehicles, mini vans,vans). Object identification andcorrect distance indication in theupper part of these vehiclescannot be guaranteed.Objects with a very small reflectioncross-section, e.g. objects ofnarrow size or soft materials, maynot be detected by the system.Parking assist systems do notdetect objects outside thedetection range.

NoticeIt is possible that the sensor detectsa non-existing object caused byecho disturbance from external

acoustic noise or mechanicalmisalignments (sporadic falsewarnings may occur).Make sure that the front numberplate is properly mounted (not bentand no gaps to the bumper on the leftor right side) and the sensors arefirmly in place.Advanced parking assist systemmay not respond to changes in theavailable parking space afterinitiating a parking manoeuvre. Thesystem may recognize an entry, agateway, a courtyard or even acrossing as a parking slot. Afterselecting reverse gear the systemwill start a parking manoeuvre. Takecare regarding the availability of thesuggested parking slot.Surface irregularities, e.g. onconstruction zones, are not detectedby the system. The driver acceptsresponsibility.

Side blind spot alertThe Side blind spot alert systemdetects and reports objects on eitherside of the vehicle, within a specified"blind spot" zone. The system

displays a visual alert in each exteriormirror, when detecting objects thatmay not be visible in the interior andexterior mirrors.Side blind spot alert uses some of theadvanced parking assist sensorswhich are located in the front and rearbumper on both sides of the vehicle.

9 Warning

Side blind spot alert does notreplace driver vision.The system does not detect:

● vehicles outside the side blindzones which may be rapidlyapproaching

● pedestrians, cyclists or animalsBefore changing a lane, alwayscheck all mirrors, look over theshoulder and use the turn signal.

Activation7'' Colour-Info-Display: select Blindspot monitoring on the homepage ofthe touch screen. System is activatedby viewing W.


8'' Colour-Info-Display: press Í.Select Driving functions on the touchscreen and then Blind spotmonitoring. System is activated byviewing on.B illuminates continously green in theinstrument cluster to confirm thefunction.

Functionality

When the system detects a vehicle inthe side blind zone while drivingforwards, a round LED will illuminatein the relevant exterior mirror.The LED comes on immediately whenbeing passed.

The LED comes on after a delay whenpassing another vehicle slowly.

Operation conditionsThe following conditions must befullfilled for proper operation:● All vehicles are moving in the

same direction and in adjacentlanes.

● The speed of your vehicle isbetween 7 and 87 mph.

● Passing a vehicle with a speeddifference of less than 6 mph.

● Another vehicle is passing with aspeed difference of less than 15mph.

● The traffic flow is normal.● Driving on a straight or slightly

curved road.● The vehicle is not pulling a trailer.

No alert will be given in the followingsituations:● In the presence of non-moving

objects (parked vehicles,barriers, street lamps, roadsigns...).

● With vehicles moving in theopposite direction.

● Driving on a winding road or asharp corner.

● When passing (or being passedby) a very long vehicle (lorry,coach...) which is at the sametime detected at the rear in theblind spot angle and present inthe driver's forward field of vision.

● In very heavy traffic: vehiclesdetected in front and behind areconfused with a lorry or astationary object.

● When passing too quickly.

DeactivationThe system is deactivated in thevehicle personalisation 3 99. Bextinguishes in the instrument cluster.Additionally, an acoustic signalsounds


The state of the system is storedwhen switching off the ignition.The system is automaticallydeactivated when towing anelectrically connected trailer.

FaultIn the event of a fault, B flashes for afew moments in the instrument panel,accompanied by F and adisplay message. Contact a dealer ora qualified workshop to have thesystem checked.

Panoramic view systemThis system allows views of thevehicle's surroundings to bedisplayed as a nearly 180° picture inthe Info display, like a bird's eye view.The system uses:● rear camera, installed in the

tailgate● ultrasonic parking sensors in the

rear bumperThe screen in the Info display isdivided into two parts: on the rightthere is a view from above the vehicle,

and on the left there is the view fromthe rear displayed. The parkingsensors complete the information onthe view from above the vehicle.

ActivationPanoramic view system is activatedby:● engaging reverse gear● driving up to 6 mph

Functionality

Different views can be selected in theleft part of the display. Change thetype of view at any time during a

manoeuvre by pressing the touchfield in the left lower zone of thedisplay:● Rear view● Auto mode● Zoom view● 180° view

The display is immediately updatedwith the type of view selected.AUTO mode is activated by default. Inthis mode, the system selects thebest view, standard or zoom, todisplay according to the informationfrom the parking sensors.The state of the system is not kept inmemory when the ignition is switchedoff.


Rear view

The area behind the vehicle isdisplayed in the screen. The verticallines represent the width of thevehicle with mirrors unfolded. Thedirection of the lines changes with theposition of the steering wheel.The first horizontal line represents adistance of about 30 cm beyond theedge of vehicle's rear bumper. Theupper horizontal lines representdistances of about one and twometres beyond the edge of yourvehicle's rear bumper.This view is available in AUTO modeor in the view selection menu.

Auto modeThis mode is activated by default.Using sensors in the rear bumper, theautomatic view changes from a rearview to a view from above, as anobstacle is approached during amanoeuvre.

Zoom view

The camera records the vehicle'ssurroundings during the manoeuvrein order to reconstruct a view fromabove the rear of the vehicle in itsnear surroundings, allowing thevehicle to be manoeuvred around

obstacles nearby. This view isavailable with AUTO mode or in theview selection menu.

180° view

The 180° view facilitates reversingout of a parking bay, making itpossible to see the approach ofvehicles, pedestrians and cyclists.This view is not recommended forcarrying out a complete manoeuvre.It is made up of three areas: left 1,centre 2 and right 3. This view isavailable from the view selectionmenu only.


DeactivationPanoramic view system isdeactivated when:● driving faster than 6 mph● seven seconds after disengaging

reverse gear● by pressing the icon q in the left

upper corner of the touch screen● opening the tailgate

General information

9 Warning

The panoramic view system doesnot replace driver vision. It will notdisplay children, pedestrians,cyclists, crossing traffic, animals,or any other objects outside of thecamera view area, e. g. below thebumper, or underneath thevehicle.Do not drive or park the vehicleusing only the panoramic viewsystem.Always check the surrounding ofthe vehicle before driving.

Displayed images may be furtheror closer than they appear. Thearea displayed is limited andobjects that are close to eitheredge of the bumper or under thebumper are not displayed on thescreen.

System limitations

Caution

For optimal operation of thesystem, it is important to keep thelense of the camera in the tailgatebetween the number plate lightsalways clean. Rinse the lense withwater and wipe with a soft cloth.Do not clean the lense with asteam-jet or high-pressure jetcleaner.

The panoramic view system may notoperate properly when:● The surrounding is dark.● The sun or the beam of

headlights is shining directly intothe camera lenses.

● During nighttime driving.● Weather limits visibility, such as

fog, rain, or snow.● The camera lenses are blocked

by snow, ice, slush, mud, dirt.● The vehicle is towing a trailer.● The vehicle had an accident.● There are extreme temperature

changes.

Rear view cameraThe rear view camera assists thedriver when reversing by displaying aview of the area behind the vehicle.The view of the camera is displayedin the Info-Display.

9 Warning

The rear view camera does notreplace driver vision. Note thatobjects that are outside thecamera's field of view and the


parking assist sensors, e.g. belowthe bumper or underneath thevehicle, are not displayed.Do not reverse or park the vehicleusing only the rear view camera.Always check the surrounding ofthe vehicle before driving.

Switching onRear view camera is automaticallyactivated when reverse gear isengaged.

Functionality

The camera is mounted above thelicence plate.The area displayed by the camera islimited. The distance of the image thatappears on the display differs fromthe actual distance.

Guide lines

The vertical lines represent thegeneral direction of the vehicle andthe distance between the verticallines corresponds to the width of yourvehicle without mirrors. The firsthorizontal line represents a distanceof about 30 cm beyond the edge ofvehicle's rear bumper. The upperhorizontal lines represent distances

of about 1 and 2 metres beyond theedge of your vehicle's rear bumper.The crossing curves represent themaximum turning circle.

Deactivation of guide linesGuide lines can be deactivated in theInfo-Display. Select Settings, IVehicle, I Collision detection, I Rearview camera guide lines, I §.Info-Display 3 94.Vehicle personalisation 3 99.

Switching offThe camera is switched off when acertain forward speed is exceeded orif reverse gear is disengaged forapprox. 10 seconds.

System limitationsThe rear view camera may notoperate properly when:● The surrounding is dark.● The beam of headlights is shining

directly into the camera lenses.● During nighttime driving.● Weather limits visibility, such as

fog, rain, or snow.


● The camera lenses are blockedby snow, ice, slush, mud, dirt.Clean the lense, rinse with water,and wipe with a soft cloth.

● The tailgate will be opened.● The vehicle is towing an

electrically connected trailer.● The vehicle had a rear end

accident.● There are extreme temperature

changes.

Lane departure warningThe lane departure warning systemobserves the lane markings betweenwhich the vehicle is driving via a frontcamera. The system detects lanechanges and warns the driver in theevent of an unintended lane changevia visual and acoustic signals.Criteria for the detection of anunintended lane change are:● No operation of turn signals.● No brake pedal operation.● No active accelerator operation

or speeding-up.

If the driver is active, no warning willbe issued.

Activation

The lane departure warning system isactivated by pressing ½. The systemis switched on when the LED in thebutton is not illuminated.The system is only operable atvehicle speeds above 37 mph and iflane markings are available.When the system recognises anunintended lane change, the controlindicator ) flashes yellow.Simultaneously a chime sound isactivated.

DeactivationThe system is deactivated bypressing ½, the LED in the buttonilluminates.At speeds below 37 mph the systemis inoperable.

FaultIn the event of a fault, Fappears in the instrument panel,accompanied by a display message.Contact a dealer or a qualifiedworkshop to have the systemchecked.The lane departure warning systemmay not operate properly when:● The windscreen is not clean.● There are adverse environmental

conditions like heavy rain, snow,direct sunlight or shadows.


The system can not operate when nolane marking is detected.

System limitationsThe system performance may notoperate properly when:● Vehicle speed is below 37 mph.● Driving on winding or hilly roads.● During nighttime driving.● Weather limits visibility, such as

fog, rain, or snow.● The sensor in the windscreen is

blocked by snow, ice, slush, mud,dirt, windscreen damage oraffected by foreign items, e.g.stickers.

● The sun is shining directly intothe camera lens.

● Close vehicles ahead.● Banked roads.● Road edges.● Roads with poor lane markings.● Sudden lighting changes.

Driver alertDriver alert monitores the driving timeabove a vehicle speed of 65 km/h.It is recommended to take a break assoon as feeling tired or at least everytwo hours.The system includes a driving timealert.

Driving time alertThe driver gets notified by a pop-upreminder symbol ˇ in the DriverInformation Centre simultaneouslywith a sound alert if the driver has nottaken a break after two hours ofdriving at a speed above 65 km/h. Thealert is repeated hourly until thevehicle is stopped, no matter howvehicle speed evolves.The counting of driving time alert isreset when the ignition has beenswitched off for a few minutes.

Deactivation or activationThe system can be deactivated oractivated in the personalisation menu3 99.

Driver drowsiness detection alert isreset when the ignition has beenswitched off for a few minutes.


FuelFuel for petrol enginesOnly use unleaded fuel that complieswith European standard EN 228 orE DIN 51626-1 or equivalent.The engine is capable of running withfuel that contains up to 10% ethanol(e.g. named E10).Use fuel with the recommendedoctane rating. A lower octane ratingcan reduce engine power and torqueand slightly increases fuelconsumption.

Caution

Do not use fuel or fuel additivesthat contain metallic compoundssuch as manganese-basedadditives. This may cause enginedamage.

Caution

Use of fuel that does not comply toEN 228 or E DIN 51626-1 orequivalent can lead to deposits orengine damage.

Caution

Use of fuel with a lower octanerating than the lowest possiblerating could lead to uncontrolledcombustion and engine damage.

The engine specific requirementsregarding octane rating are given inthe engine data overview 3 222. Acountry-specific label at the fuel fillerflap can supersede the requirement.

Fuel additives outside EuropeFuel should contain detergentadditives that help prevent engineand fuel system deposits fromforming. Clean fuel injectors andintake valves will allow the emissioncontrol system to work properly.

Some fuel does not contain sufficientquantities of additive to keep fuelinjectors and intake valves clean.To make up for this lack ofdetergency, add Fuel SystemTreatment PLUS to the fuel tank atevery engine oil change or every6,000 miles, whichever occurs first. Itis available at your workshop.Fuels containing oxygenates such asethers and ethanol, as well asreformulated fuel, are available insome cities. If these fuels comply withthe previously describedspecification, then they areacceptable to use. However, E85(85% ethanol) and other fuelscontaining more than 15% ethanolmust be used only in FlexFuelvehicles.

Caution

Do not use fuel containingmethanol. It can corrode metalparts in the fuel system and alsodamage plastic and rubber parts.This damage would not becovered by the vehicle warranty.


Some fuels, mainly high octaneracing fuels, can contain an octaneenhancing additive calledmethylcyclopentadienyl manganesetricarbonyl (MMT). Do not use fuels orfuel additives with MMT as they canreduce spark plug life and affectemission control systemperformance. The malfunctionindicator light Z may turn on 3 87. Ifthis occurs, seek the assistance of aworkshop.

Fuel for diesel enginesOnly use diesel fuel that complieswith EN 590.In countries outside the EuropeanUnion use Euro-Diesel fuel with asulfur concentration below 50 ppm.

Caution

Use of fuel that does not comply toEN 590 or similar can lead toengine powerloss, increased wearor engine damage.

Do not use marine diesel oils, heatingoils, Aquazole and similar diesel-water emulsions. Diesel fuels mustnot be diluted with fuels for petrolengines.

Refuelling

9 Danger

Before refuelling, switch offignition and any external heaterswith combustion chambers.Follow the operating and safetyinstructions of the filling stationwhen refuelling.

9 Danger

Fuel is flammable and explosive.No smoking. No naked flames orsparks.If you can smell fuel in yourvehicle, have the cause of thisremedied immediately by aworkshop.

Caution

In case of misfuelling, do notswitch on ignition.

Fuel filler flap is located at left rearside of vehicle.


The fuel filler flap can only be openedif the vehicle is unlocked. Release thefuel filler flap by pushing the flap.

Petrol and Diesel refuellingTo open, turn the cap slowlyanticlockwise.

The fuel filler cap can be attached tothe hook on the fuel filler flap.To refuel, fully insert the pump nozzleand switch it on.After the automatic cut-off, the tankcan be topped up by operating thepump nozzle a maximum of two moretimes.

Caution

Wipe off any overflowing fuelimmediately.

To close, turn the fuel filler capclockwise until it clicks.Close the flap and allow it to engage.

Fuel filler capOnly use genuine fuel filler caps.Diesel-engined vehicles have specialfuel filler caps.

Fuel consumption - CO2-Emissions The fuel consumption (combined) ofthe model Vauxhall Crossland X iswithin a range of 46 to 78 mpg.The CO2 emission (combined) iswithin a range of 141 to 93 g/km.For the values specific for yourvehicle, refer to the EEC Certificate ofConformity provided with your vehicleor other national registrationdocuments.

General informationThe official fuel consumption andspecific CO2 emission figures quotedrelate to the EU base model withstandard equipment.Fuel consumption data and CO2emission data are determinedaccording to regulation R (EC) No.


715/2007 (in the version respectivelyapplicable), taking into considerationthe vehicle weight in running order, asspecified by the regulation.The figures are provided only for thepurpose of comparison betweendifferent vehicle variants and mustnot be taken as a guarantee for theactual fuel consumption of aparticular vehicle. Additionalequipment may result in higherresults than the stated consumptionand CO2 figures. Furthermore, fuelconsumption is dependent onpersonal driving style as well as roadand traffic conditions.

Trailer hitchGeneral informationThe factory-fitted towing equipment isfolded up under the rear bumperfascia.Entrust retrofitting of towingequipment to a workshop. It may benecessary to make changes thataffect the cooling system, heatshields or other equipment. Only usetowing equipment that has beenapproved for your vehicle.To avoid vehicle damage, the powertailgate cannot be operated with theradio remote control when a trailer iselectrically connected.The bulb outage detection function fortrailer brake light cannot detect apartial bulb outage, e.g. in case of fourtimes five watt bulbs, the function onlydetects lamp outage when only asingle five Watt lamp remains or noneremain.Fitting of towing equipment couldcover the opening of the towing eye.If this is the case use the coupling ballbar for towing.

Driving characteristics andtowing tipsBefore attaching a trailer, lubricatethe coupling ball. However, do not doso if a stabiliser, which acts on thecoupling ball, is being used to reducesnaking movements.During trailer towing do not exceed aspeed of 50 mph. A maximum speedof 60 mph is only appropriate if anoscillation damper is used and thepermissible gross trailer weight doesnot exceed the vehicle's curb weight.For trailers with low driving stabilityand caravan trailers, the use of anoscillation damper is stronglyrecommended.If the trailer starts snaking, drive moreslowly, do not attempt to correct thesteering and brake sharply ifnecessary.When driving downhill, drive in thesame gear as if driving uphill anddrive at a similar speed.Adjust tyre pressure to the valuespecified for full load 3 228.


Trailer towingTrailer loadsThe permissible trailer loads arevehicle and engine-dependentmaximum values which must not beexceeded. The actual trailer load isthe difference between the actualgross weight of the trailer and theactual coupling socket load with thetrailer coupled.The permissible trailer loads arespecified in the vehicle documents. Ingeneral, they are valid for gradientsup to 12%.The permissible trailer load appliesup to the specified incline and at sealevel. Since engine power decreasesas altitude increases due to the airbecoming thinner, therefore reducingclimbing ability, the permissible grosstrain weight also decreases by 10%for every 1000 metres of altitude. Thegross train weight does not have to bereduced when driving on roads withslight inclines (less than 8%, e.g.motorways).

The permissible gross train weightmust not be exceeded. This weight isspecified on the identification plate3 217.

Vertical coupling loadThe vertical coupling load is the loadexerted by the trailer on the couplingball. It can be varied by changing theweight distribution when loading thetrailer.The maximum permissible verticalcoupling load of 60 kg is specified onthe towing equipment identificationplate and in the vehicle documents.Always aim for the maximum load,especially in the case of heavytrailers. The vertical coupling loadshould never fall below 25 kg.

Rear axle loadWhen the trailer is coupled and thetowing vehicle fully loaded, thepermissible rear axle load (seeidentification plate or vehicledocuments) may be exceeded by60 kg, the gross vehicle weight ratingmust not be exceeded. If thepermissible rear axle load isexceeded, a maximum speed of60 mph applies.

Towing equipment

Caution

When operating without a trailer,remove the coupling ball bar.

Stowage of coupling ball barThe bag with the coupling ball bar isstowed on the rear floor cover in theload compartment.


Place the strap through the rear rightlashing eye, wrap around twice andtighten the strap to secure the bag.

Fitting the coupling ball bar

Swivel the connecting socketdownwards. Remove the sealing plugfrom the opening for the coupling ballbar and stow it.

Checking the tensioning of thecoupling ball bar● Red marking on rotary knob must

point towards green marking oncoupling ball bar.

● The gap between the rotary knoband the coupling ball bar must beapprox. 6 mm.

● The key must be in position c.Otherwise, the coupling ball bar mustbe tensioned before being inserted:

● Unlock coupling ball bar byturning key to position c.

● Pull out rotary knob and turnclockwise as far as it will go.


Inserting the coupling ball bar

Insert the tensioned coupling ball barin the opening and push firmlyupwards until it audibly engages.The rotary handle snaps back into itsoriginal position resting against thecoupling ball bar without a gap.

9 Warning

Do not touch rotary handle duringinsertion.

Lock the coupling ball bar by turningthe key to position e. Remove the keyand close the protective flap.

Eye for break-away stopping cable

Attach breakaway stopping cable toeye.

Check that the coupling ball bar iscorrectly installed● Green marking on rotary knob

must point towards greenmarking on coupling ball bar.

● There must be no gap betweenthe rotary handle and thecoupling ball bar.

● The coupling ball bar must befirmly engaged in the opening.

● The coupling ball bar must belocked and the key removed.

9 Warning

Towing a trailer is permitted onlywhen a coupling ball bar is fittedcorrectly. If the coupling ball bardoes not engage correctly, seekthe assistance of a workshop.

Dismounting the coupling ball bar

Open the protective flap and turn thekey to position c to unlock thecoupling ball bar.Pull out rotary handle and turnclockwise as far as it will go. Pull outcoupling ball bar downwards.Insert sealing plug in opening.


Swivel the connecting socketupwards.Stow the coupling ball bar in the bagand secure by fixing the strap throughthe rear right lashing eye. Wraparound twice and tighten the strap tosecure the bag.

174 Vehicle care

Vehicle care

General Information ................... 174Accessories and vehiclemodifications .......................... 174

Vehicle storage ........................ 175End-of-life vehicle recovery ..... 175

Vehicle checks ........................... 176Performing work ...................... 176Bonnet ..................................... 176Engine oil ................................. 177Engine coolant ......................... 178Washer fluid ............................ 178Brakes ..................................... 179Brake fluid ............................... 179Vehicle battery ......................... 179Diesel fuel system bleeding ..... 181Wiper blade replacement ........ 181

Bulb replacement ....................... 182Halogen headlights .................. 182LED headlights ........................ 184Fog lights ................................. 184Tail lights ................................. 185Side turn signal lights .............. 188Number plate light ................... 189Interior lights ............................ 189Instrument panel illumination ... 189

Electrical system ........................ 189Fuses ....................................... 189Engine compartment fuse box . 190Instrument panel fuse box ....... 192

Vehicle tools .............................. 194Tools ........................................ 194

Wheels and tyres ....................... 195Winter tyres ............................. 195Tyre designations .................... 195Tyre pressure .......................... 195Tyre deflation detectionsystem .................................... 196

Tread depth ............................. 197Changing tyre and wheel size . 198Wheel covers ........................... 198Tyre chains .............................. 199Tyre repair kit .......................... 199Wheel changing ....................... 202Spare wheel ............................ 204

Jump starting ............................. 206Towing ....................................... 207

Towing the vehicle ................... 207Towing another vehicle ........... 208

Appearance care ....................... 209Exterior care ............................ 209Interior care ............................. 211

General InformationAccessories and vehiclemodificationsWe recommend the use of genuineparts and accessories and factoryapproved parts specific for yourvehicle type. We cannot assess orguarantee reliability of other products- even if they have a regulatory orotherwise granted approval.Any modification, conversion or otherchanges made to standard vehiclespecifications (including, withoutlimitation, software modifications,modifications of the electronic controlunits) may invalidate the warrantyoffered by Vauxhall. Furthermore,such changes may affect driverassistance systems, may impact fuelconsumption, CO2 emissions andother emissions of the vehicle andcause the vehicle to no longerconform to the type approval,impacting the validity of your vehicleregistration.

Vehicle care 175

Caution

When transporting the vehicle ona train or on a recovery vehicle, themud flaps might be damaged.

Vehicle storageStorage for a long period of timeIf the vehicle is to be stored for severalmonths:● Wash and wax the vehicle.● Have the wax in the engine

compartment and underbodychecked.

● Clean and preserve the rubberseals.

● Fill up fuel tank completely.● Change the engine oil.● Drain the washer fluid reservoir.● Check the coolant antifreeze and

corrosion protection.● Adjust tyre pressure to the value

specified for full load.

● Park the vehicle in a dry, wellventilated place. Engage first orreverse gear or set selector leverto P. Prevent the vehicle fromrolling.

● Do not apply the parking brake.● Open the bonnet, close all doors

and lock the vehicle.● Disconnect the clamp from the

negative terminal of the vehiclebattery. Beware that all systemsare not functional, e.g. anti-theftalarm system.

Putting back into operationWhen the vehicle is to be put back intooperation:● Connect the clamp to the

negative terminal of the vehiclebattery. Activate the electronicsof the power windows.

● Check tyre pressure.● Fill up the washer fluid reservoir.● Check the engine oil level.● Check the coolant level.● Fit the number plate if necessary.

End-of-life vehicle recoveryInformation on end-of-life vehiclerecovery centres and the recycling ofend-of-life vehicles is available on ourwebsite, where legally required. Onlyentrust this work to an authorisedrecycling centre.

176 Vehicle care

Vehicle checksPerforming work

9 Warning

Only perform engine compartmentchecks when the ignition is off.The cooling fan may startoperating even if the ignition is off.

9 Danger

The ignition system usesextremely high voltage. Do nottouch.

BonnetOpeningOpen the driver's door.

Pull the release lever and return it toits original position.

Move the safety catch sideways to theleft vehicle side and open the bonnet.The bonnet is held openautomatically.If the bonnet is opened during anAutostop, the engine will be restartedautomatically for safety reasons.Stop-start system 3 131.

ClosingLower the bonnet and let it fall into thelatch from a low height (20-25 cm).Check that the bonnet is engaged.

Vehicle care 177

Caution

Do not press the bonnet into thelatch to avoid dents.

Engine oilCheck the engine oil level manuallyon a regular basis to prevent damageto the engine. Ensure that the correctspecification of oil is used.Recommended fluids and lubricants3 215.The maximum engine oilconsumption is 0.6 l per 1000 km.Check with the vehicle on a levelsurface. The engine must be atoperating temperature and switchedoff for at least five minutes.

Caution

It is the owner's responsibility tomaintain the proper level of anappropriate quality oil in theengine.

Pull out the dipstick, wipe it clean,insert it to the stop on the handle, pullout and read the engine oil level.Insert dipstick to the stop on thehandle and make half a turn.

When the engine oil level hasdropped to the MIN mark, top upengine oil.

Different dipsticks are useddepending on engine variant.We recommend the use of the samegrade of engine oil that was used atlast change.

178 Vehicle care

The engine oil level must not exceedthe MAX mark on the dipstick.

Caution

Overfilled engine oil must bedrained or suctioned out.

Capacities 3 227.Fit the cap on straight and tighten it.

Engine coolantThe coolant provides freezeprotection down to approx. -37 °C.

Caution

Only use approved antifreeze.

Coolant and antifreeze 3 215.

Coolant level

Caution

Too low a coolant level can causeengine damage.

If the cooling system is cold, thecoolant level should be above theMIN mark. Top up if the level is low.

9 Warning

Allow the engine to cool beforeopening the cap. Carefully openthe cap, relieving the pressureslowly.

To top up, use a 1:1 mixture ofreleased coolant concentrate mixedwith clean tap water. If no coolantconcentrate is available, use cleantap water. Install the cap tightly. Have

the coolant concentration checkedand have the cause of the coolantloss remedied by a workshop.

Washer fluid

Fill with clean water mixed with asuitable quantity of approvedwindscreen washer fluid whichcontains antifreeze.

Vehicle care 179

Caution

Only washer fluid with a sufficientantifreeze concentration providesprotection at low temperatures ora sudden drop in temperature.

Washer fluid 3 215.

BrakesIn the event of minimum thickness ofthe brake lining, a squealing noisesounds during braking.Continued driving is possible buthave the brake lining replaced assoon as possible.Once new brake linings are installed,do not brake unnecessarily hard forthe first few journeys.

Brake fluid

9 Warning

Brake fluid is poisonous andcorrosive. Avoid contact with eyes,skin, fabrics and painted surfaces.

The brake fluid level must be betweenthe MIN and MAX marks.If fluid level is below MIN seek theassistance of a workshop.Brake and clutch fluid 3 215.

Vehicle batteryThe vehicle battery is maintenance-free provided that the driving profileallows sufficient charging of thebattery. Short-distance-driving andfrequent engine starts can dischargethe battery. Avoid the use ofunnecessary electrical consumers.

Batteries do not belong in householdwaste. They must be disposed of atan appropriate recycling collectionpoint.Laying up the vehicle for more thanfour weeks can lead to batterydischarge. Disconnect the clamp fromthe negative terminal of the vehiclebattery.Ensure the ignition is switched offbefore connecting or disconnectingthe vehicle battery.Battery discharge protection 3 113.

Disconnecting the batteryIf the vehicle's battery is to bedisconnected (e.g. for maintenancework), the alarm siren must bedeactivated as follows: Switch theignition on then off, then disconnectthe vehicle's battery within15 seconds.

180 Vehicle care

Replacing the vehicle batteryNoticeAny deviation from the instructionsgiven in this section may lead totemporary deactivation of the stop-start system.

When the vehicle battery is beingreplaced, please ensure that thereare no open ventilation holes in thevicinity of the positive terminal. If aventilation hole is open in this area, itmust be closed off with a dummy cap,and the ventilation in the vicinity of thenegative terminal must be opened.In vehicles with an AGM (AbsorptiveGlass Mat) battery, ensure the batteryis replaced with another AGM battery.

An AGM battery can be identified bythe label on the battery. Werecommend the use of an originalVauxhall vehicle battery.NoticeUsing an AGM vehicle batterydifferent from the original Vauxhallvehicle battery may result in a lowerperformance.

We recommend that you have thevehicle battery replaced by aworkshop.Stop-start system 3 131.

Charging the vehicle battery

9 Warning

On vehicles with stop-startsystem, ensure that the chargingpotential does not exceed14.6 volts when using a batterycharger. Otherwise the vehiclebattery might be damaged.

Jump starting 3 206.

Warning label

Vehicle care 181

Meaning of symbols:● No sparks, naked flames or

smoking.● Always shield eyes. Explosive

gases can cause blindness orinjury.

● Keep the vehicle battery out ofreach of children.

● The vehicle battery containssulphuric acid which could causeblindness or serious burninjuries.

● See the Owner's Manual forfurther information.

● Explosive gas may be present inthe vicinity of the vehicle battery.

Diesel fuel system bleedingIf the tank has been run dry, the dieselfuel system must be bled. Switch onthe ignition three times for15 seconds at a time. Then crank theengine for a maximum of40 seconds. Repeat this process afterno less than five seconds. If theengine fails to start, seek theassistance of a workshop.

Wiper blade replacement

Lift the wiper arm until it stays in theraised position, press button todisengage the wiper blade andremove.Attach the wiper blade slightly angledto the wiper arm and push until itengages.Lower wiper arm carefully.

Wiper blade on the rear window

Lift wiper arm. Disengage wiper bladeas shown in illustration and remove.Attach the wiper blade slightly angledto the wiper arm and push until itengages.Lower wiper arm carefully.

182 Vehicle care

Bulb replacementSwitch off the ignition and switch offthe relevant switch or close the doors.Only hold a new bulb at the base. Donot touch the bulb glass with barehands.Use only the same bulb type forreplacement.Replace headlight bulbs from withinthe engine compartment.

Bulb checkAfter a bulb replacement switch onthe ignition, operate and check thelights.

Halogen headlightsHalogen headlights with separatehousings for low beam and highbeam/turn signal light.

High beam, turn signal light (1)Low beam (2)

High beam

1. Rotate the cap (1) anticlockwiseand remove it.

2. Withdraw the upper bulb holderfrom the reflector housing.

Vehicle care 183

3. Remove the bulb from the plugconnector by pulling.

4. Replace the bulb and connect it tothe plug connector.

5. Insert and push the bulb holderinto the reflector housing bysetting the lug into position.

6. Fit the cap and rotate clockwise.

Turn signal light


2. Rotate the lower bulb holderanticlockwise to disengage.Withdraw the bulb holder from thereflector housing.

3. Press latch and remove the bulbfrom the bulb holder.

4. Replace the bulb and attach it tothe bulb holder.

5. Insert the bulb holder into thereflector housing and rotateclockwise.


Low beam


184 Vehicle care

2. Lift the retainer, then pull the plugconnector backwards.

3. Fold down the retainer andremove the bulb from the reflectorhousing.

4. Replace the bulb and push it intothe reflector housing by settingthe lug into position.

5. Fold up the retainer and hold inposition.

6. Attach the plug connector to thebulb and fix it with the retainer.


Sidelight/Daytime running lightIn case of defective LEDs, have themreplaced by a workshop.

LED headlightsHeadlights for low and high beam,sidelights, daytime running lights andturn signal lights are designed asLEDs and can not be changed.Have lights repaired by a workshop incase of failure.

Fog lightsThe bulbs are accessible from theunderside of the vehicle.

1. Turn the bulb holder anti-clockwise and remove it from thereflector housing.

Vehicle care 185

2. Disengage the bulb socket fromthe plug connector by pressingthe retaining lug.

3. Remove and replace the bulbsocket with bulb and attach theplug connector.

4. Insert the bulb socket into thereflector housing by turningclockwise and engage.

Tail lightsDepending on version, tail lights andbrake lights are designed as LEDs. Incase of failure, have LEDs replacedby a workshop.

Light assembly in the body

Detaching the light assembly

1. Unscrew the two screws thatsecure the light assembly.

2. Remove the light assembly bypulling it straight back.

3. Remove the three screws thatsecure the bulb carrier.

4. Version without LED

186 Vehicle care

Remove the bulb by pulling andreplace.Tail light/Brake light 1Turn-signal light 2Version with LEDOnly turn signal light bulb can bereplaced.

Remove the bulb socket from thelight assembly by turning itanticlockwise.

Remove the turn signal light bulbfrom the socket by pulling itstraight out.Replace bulb.

Attaching the light assembly1. Attach the bulb carrier to the light

assembly and secure with thethree screws.

2. Attach the light assembly to thevehicle body as shown in theillustration and secure with thetwo screws.

Vehicle care 187

Light assembly in the tailgate

Detaching the light assembly

1. Release the cover in the tailgateand remove it.

2. Unscrew the plastic securing nutby hand.

3. Carefully withdraw the lightassembly from the recesses andremove.

4. Press latch to release and removebulb carrier.

5. Version without LED

Remove and replace the bulb:Tail light 1Rear fog light (right side), reverselight (left side) 2Version with LEDOnly reverse light bulb can bereplaced.

188 Vehicle care

Remove the bulb socket from thelight assembly by turning itanticlockwise.

Remove the bulb from the socketby pulling it straight out.

Replace bulb.

Attaching the light assembly1. Attach bulb carrier to the light

assembly.

2. Attach the light assembly to thetailgate.

3. Secure the light assembly with theplastic securing nut.

4. Attach the cover to the tailgate.

Side turn signal lightsTo replace bulb, remove lamphousing:

1. Slide lamp to its left side andremove with its right end.

Vehicle care 189

2. Turn bulb holder anticlockwiseand remove from housing.

3. Pull bulb from bulb holder andreplace it.

4. Insert bulb holder and turnclockwise.

5. Insert left end of the lamp, slide tothe left and insert right end.

Number plate lightThe number plate light is designed asLEDs and can not be changed. Incase of defective LEDs, have themreplaced by a workshop.

Interior lightsCourtesy light, reading lightsHave bulbs replaced by a workshop.

Load compartment lightHave bulbs replaced by a workshop.

Instrument panelilluminationHave bulbs replaced by a workshop.

Electrical systemFusesData on the replacement fuse mustmatch the data on the defective fuse.There are three fuse boxes in thevehicle:● engine compartment● instrument panel

Before replacing a fuse, turn off therespective switch and the ignition.A blown fuse can be recognised by itsmelted wire.

Caution

Do not replace the fuse until thecause of the fault has beenremedied.

Some functions are protected byseveral fuses.Fuses may also be inserted withoutexistence of a function.

190 Vehicle care

Fuse extractorA fuse extractor may be located in thefuse box in the engine compartment.

Place the fuse extractor on thevarious types of fuse from the top orside, and withdraw fuse.

Engine compartment fusebox

The fuse box is in the front left of theengine compartment.Disengage the cover and remove it.

Vehicle care 191

No. Circuit

1 Fan climate control system

2 –

3 Body fuse box

4 –

5 Instrument panel fuse box

6 Engine cooling unit

7 Body control module

8 Engine control fuel pump

9 Engine control

No. Circuit

10 Engine control

11 Engine control

12 Engine cooling unit


14 Intelligent battery sensor

15 –

16 Front fog light

17 –

18 High beam right

19 High beam left

20 Engine control fuel pump

21 Starter

22 –

23 Starter

24 Trailer hitch

25 Instrument panel fuse box

26 Transmission control module

No. Circuit


28 Engine control module

29 Front wiper


After having changed defective fuses,close the fuse box cover and pressuntil it engages.If the fuse box cover is not closedcorrectly, malfunction may occur.

192 Vehicle care

Instrument panel fuse boxFuse box on the left side of theinstrument panel

In right-hand drive vehicles, the fusebox is located behind a cover in theglovebox. Open the glovebox andremove the cover.

No. Circuit

1 Interior mirror / Exhaustsystem / Electric powersteering / Clutch sensor / LPG /Exterior mirror adjustment /Inductive charging

2 –

3 Trailer Hitch

4 Horn

5 Windscreen washer pump front/rear

No. Circuit

6 Windscreen washer pump front/rear

7 Heated steering wheel

8 Rear wiper

9 –

10 Central locking system

11 Central locking system

12 Instrument cluster

13 Climate control system / USB

14 OnStar

15 Instrument cluster / Climatecontrol system

16 Brake / Starter / Retained poweroff

17 Instrument cluster

18 Advanced parking assist

19 Top column module / Trailercontrol module

20 –

Vehicle care 193

No. Circuit

21 Anti-theft alarm system / Startbutton

22 Rain sensor / Camera

23 Door module

24 Advanced parking assist /Camera / Infotainment

25 Airbag

26 Top column module

27 Anti-theft alarm system

28 –

29 Infotainment

30 –

31 Infotainment

32 Power outlet front

33 –

34 Heated exterior mirrors / Doormodule

No. Circuit

35 Instrument cluster / Lightswitch / Advanced parkingassist/ Transmission controlmodule

36 Courtesy lights / Sunvisorlights / Glovebox light

Fuse box on the right side of theinstrument panel

In right-hand drive vehicles, the fusebox is behind a cover in theinstrument panel. Disengage cover atthe side and remove.

No. Circuit

1 Heated rear window

2 Heated exterior mirrors

3 Front power window

4 Driver's door control unit

5 Rear power window

6 Heated seats

7 –

8 Infotainment

9 –

194 Vehicle care

No. Circuit

10 Power outlet rear

11 –

12 –

Vehicle toolsToolsVehicles with spare wheel

The jack, tools, a strap for securing adamaged wheel and the towing eyeare placed in the tool box in the rightwall of the load compartment. Sparewheel 3 204.

Vehicles without spare wheel

The screwdriver and the towing eyeare located in a box below the floorcover in the load compartment.Tyre repair kit 3 199.

Vehicle care 195

Wheels and tyres

Tyre condition, wheel conditionDrive over edges slowly and at rightangles if possible. Driving over sharpedges can cause tyre and wheeldamage. Do not trap tyres on the kerbwhen parking.Regularly check the wheels fordamage. Seek the assistance of aworkshop in the event of damage orunusual wear.

Winter tyresWinter tyres improve driving safety attemperatures below 7 °C and shouldtherefore be fitted on all wheels.In accordance with country-specificregulations, affix the speed sticker inthe driver's field of view.All tyre sizes are permitted as wintertyres 3 228.

Tyre designationsE.g. 195/65 R 15 91 T195 : tyre width, mm65 : cross-section ratio (tyre height

to tyre width), %R : belt type: RadialRF : type: RunFlat15 : wheel diameter, inches91 : load index e.g. 95 is equivalent

to 615 kgT : speed code letter

Speed code letter:Q : up to 100 mphS : up to 112 mphT : up to 118 mphH : up to 130 mphV : up to 150 mphW : up to 168 mph

Choose a tyre appropriate for themaximum speed of your vehicle.The maximum speed is achievable atkerb weight with driver (75 kg) plus125 kg payload. Optional equipmentcould reduce the maximum speed ofthe vehicle.Performance 3 224.

Directional tyresDirectional tyres should be mountedso that they rotate in the correctdirection. The proper rotationdirection is indicated by a symbol(e.g. an arrow) on the sidewall.

Tyre pressureCheck the pressure of cold tyres atleast every 14 days and before anylong journey. Do not forget the sparewheel. This also applies to vehicleswith tyre pressure monitoring system.Unscrew the valve cap.

Tyre pressure 3 228.

196 Vehicle care

The tyre pressure information labelon the left door frame indicates theoriginal equipment tyres and thecorrespondent tyre pressures.The tyre pressure data refers to coldtyres. It applies to summer and wintertyres.Always inflate the spare tyre to thepressure specified for full load.The ECO tyre pressure serves toachieve the smallest amount of fuelconsumption possible.Incorrect tyre pressures will impairsafety, vehicle handling, comfort andfuel economy and will increase tyrewear.Tyre pressures differ depending onvarious options. For the correct tyrepressure value, follow the procedurebelow:1. Identify drive axle and body style.2. Identify the engine identifier code.

Engine data 3 222.3. Identify the respective tyre.

The tyre pressure tables show allpossible tyre combinations 3 228.

For the tyres approved for yourvehicle, refer to the EEC Certificate ofConformity provided with your vehicleor other national registrationdocuments.The driver is responsible for correctadjustment of tyre pressure.

9 Warning

If the pressure is too low, this canresult in considerable tyre warm-up and internal damage, leading totread separation and even to tyreblow-out at high speeds.

9 Warning

For specific tyres therecommended tyre pressure asshown in the tyre pressure tablemay exceed the maximum tyrepressure as indicated on the tyre.Never exceed the maximum tyrepressure as indicated on the tyre.

Temperature dependencyThe tyre pressure depends on thetemperature of the tyre. Duringdriving, tyre temperature andpressure increase. Tyre pressurevalues provided on the tyreinformation label and tyre pressurechart are valid for cold tyres, whichmeans at 20 °C.The pressure increases by nearly1.5 psi for a 10 °C temperatureincrease. This must be consideredwhen warm tyres are checked.The tyre pressure value displayed inthe Driver Information Centre showsthe real tyre pressure. A cooled downtyre will show a decreased value,which does not indicate an air leak.

Tyre deflation detectionsystemThe tyre deflation detection systemcontinually checks the rotation speedof all four wheels and warns on lowtyre pressure condition once vehicleis driving. This is achieved bycomparing tyre rolling circumferencewith reference values.

Vehicle care 197

If a tyre loses pressure the controlindicator w illuminates and a warningmessage is displayed in the DriverInformation Centre.In this case reduce speed, avoidsharp cornering and strong braking.Stop at next safe opportunity andcheck tyre pressure.Control indicator w 3 90.After adjusting tyre pressure initialisesystem to extinguish the controlindicator and restart system.

Caution

Deflation detection system warnsjust about low tyre pressurecondition and does not replaceregular tyre maintenance by thedriver.

In case of a system malfunction amessage is displayed in the DriverInformation Centre. Set correct tyrepressure and reinitialise system. If thefailure continues to be displayed,contact a workshop. The system isinoperable when ABS or ESC has amalfunction or a temporary spare

wheel is used. Once the road tyre hasbeen refitted, check the tyre pressurewith cold tyres and initialise thesystem.

System initialisation

After tyre pressure correction orwheel change, the system must beinitialised to learn new circumferencereference values:1. Always ensure that all four tyres

have correct tyre pressure3 228.

2. Apply manual parking brake.

3. Press w to reset deflationdetection system.

4. Reset is confirmed by pop-upindication.

After initialisation systemautomatically calibrates to new tyrepressures during driving. After longerdrive the system will adopt andmonitor new pressures.Always check tyre pressure with coldtyres.System has to be reinitialised when:● Tyre pressure has been changed● Load condition has been

changed● Wheels have been swapped or

exchangedThe system will not warninstantaneously on a tyre blow out ora rapid deflation. This is due torequired calculation time.

Tread depthCheck tread depth at regularintervals.

198 Vehicle care

Tyres should be replaced for safetyreasons at a tread depth of 2-3 mm(4 mm for winter tyres).For safety reasons, it isrecommended that the tread depth ofthe tyres on one axle should not varyby more than 2 mm.

The legally permissible minimumtread depth (1.6 mm) has beenreached when the tread has worndown as far as one of the tread wearindicators (TWI). Their position isindicated by markings on thesidewall.

If there is more wear at the front thanthe rear, swap round front wheels andrear wheels periodically. Ensure thatthe direction of rotation of the wheelsremains the same.Tyres age, even if they are not used.We recommend tyre replacementevery 6 years.

Changing tyre and wheelsizeIf tyres of a different size than thosefitted at the factory are used, it may benecessary to reprogramme thespeedometer as well as the nominaltyre pressure and make other vehiclemodifications.After converting to a different tyresize, have the label with tyrepressures replaced and the tyredeflation detection systemreinitialised. 3 196

9 Warning

The use of unsuitable tyres orwheels may lead to accidents andwill invalidate the vehicleoperating permit.

Wheel coversWheel covers and tyres that arefactory approved for the respectivevehicle and comply with all of therelevant wheel and tyre combinationrequirements must be used.If the wheel covers and tyres used arenot factory approved, the tyres mustnot have a rim protection ridge.Wheel covers must not impair brakecooling.

Vehicle care 199

9 Warning

Use of unsuitable tyres or wheelcovers could lead to suddenpressure loss and therebyaccidents.

Vehicles with steel wheels: Whenusing locking wheel nuts, do notattach wheel covers.

Tyre chains

Tyre chains are only permitted on thefront wheels.

Always use fine mesh chains that addno more than 10 mm to the tyre treadand the inboard sides (including chainlock).

9 Warning

Damage may lead to tyre blowout.

Tyre chains are only permitted ontyres of size 195/65 R15 91 and195/60 R16 89Temporary spare wheelThe use of tyre chains is not permittedon the temporary spare wheel.

Tyre repair kitMinor damage to the tyre tread can berepaired with the tyre repair kit.Do not remove foreign bodies fromthe tyres.Tyre damage exceeding 4 mm or thatis at tyre's sidewall cannot be repairedwith the tyre repair kit.

9 Warning

Do not drive faster than 50 mph.Do not use for a lengthy period.Steering and handling may beaffected.

If you have a flat tyre:Apply the parking brake and engagefirst gear, reverse gear or P.

The tyre repair kit is in the loadcompartment below the floor cover.1. Remove the sealant bottle and the

compressor.

200 Vehicle care

2. Pull speed limit label from sealantbottle and place it in driver'svisible area.

3. Remove the electrical connectioncable and air hose from thestowage compartments on theunderside of the compressor.

4. Screw the compressor air hose tothe connection on the sealantbottle.

5. Fit the sealant bottle into thebracket on the compressor.Set the compressor near the tyrein such a way that the sealantbottle is upright.

6. Unscrew valve cap from defectivetyre.

7. Screw the filler hose to the tyrevalve.

8. The switch on the compressormust be set to J.

9. Connect the compressor plug tothe power outlet or cigarettelighter socket.To avoid discharging the battery,we recommend running theengine.

Vehicle care 201

10. Set the rocker switch on thecompressor to I. The tyre is filledwith sealant.

11. The compressor pressure gaugebriefly indicates up to 6 bar whilstthe sealant bottle is emptying(approx. 30 seconds). Then thepressure starts to drop.

12. All of the sealant is pumped intothe tyre. Then the tyre is beinginflated.

13. The prescribed tyre pressureshould be obtained within tenminutes.Tyre pressure 3 228.

When the correct pressure isobtained, switch off thecompressor.If the prescribed tyre pressure isnot obtained within ten minutes,remove the tyre repair kit. Movethe vehicle one tyre rotation.Reattach the tyre repair kit andcontinue the filling procedure forten minutes. If the prescribed tyrepressure is still not obtained, thetyre is too badly damaged. Seekthe assistance of a workshop.

Drain excess tyre pressure withthe button on the air hose.Do not run the compressor longerthan ten minutes.

14. Detach the tyre repair kit. Removesealant bottle from bracket. Screwthe filler hose to the freeconnection of the sealant bottle.This prevents sealant fromescaping. Stow tyre repair kit inload compartment.

15. Remove any excess sealantusing a cloth.

16. Continue driving immediately sothat sealant is evenly distributedin the tyre. After driving approx.three miles (but no more than tenminutes), stop and check tyrepressure. Screw compressor airhose directly onto tyre valve whendoing this. Fill tyre as described

202 Vehicle care

before. Drain excess tyrepressure with the button on the airhose.If tyre pressure hasn't decreasedunder 1.5 bar, set it to the correctvalue. Otherwise the vehicle mustnot be used. Seek assistance of aworkshop.3 228Repeat the checking procedureonce more after driving furtherthree miles (but no more than tenminutes) to check that there is nomore loss of pressure.If the tyre pressure has fallenbelow 1.5 bar, the vehicle mustnot be used. Seek the assistanceof a workshop.

17. Stow away tyre repair kit in loadcompartment.

NoticeThe driving characteristics of therepaired tyre are severely affected,therefore have this tyre replaced.If unusual noise is heard or thecompressor becomes hot, turncompressor off for at least30 minutes.

The built-in safety valve opens at apressure of seven bar (102 psi).Note the expiry date of the kit. Afterthis date its sealing capability is nolonger guaranteed. Pay attention tostorage information on sealantbottle.Replace the used sealant bottle.Dispose of the bottle as prescribedby applicable laws.The compressor and sealant can beused from approx. -30 °C.

Wheel changingSome vehicles are equipped with atyre repair kit instead of a spare wheel3 199.Make the following preparations andobserve the following information:● Park the vehicle on a level, firm

and non-skid surface. The frontwheels must be in the straight-ahead position.

● Apply the parking brake andengage first gear, reverse gear orP.

● Remove the spare wheel 3 204.

● Never change more than onewheel at once.

● Use the jack only to changewheels in case of puncture, notfor seasonal winter or summertyre change.

● The jack is maintenance-free.● If the ground on which the vehicle

is standing is soft, a solid board(max. 1 cm thick) should beplaced under the jack.

● Take heavy objects out of thevehicle before jacking up.

● No people or animals may be inthe vehicle when it is jacked-up.

● Never crawl under a jacked-upvehicle.

● Do not start the vehicle when it israised on the jack.

● Before screwing in the wheelbolts, clean them and lightly coatthe taper of each wheel bolt withcommercially available grease.

Vehicle care 203

9 Warning

Do not grease the thread of thewheel bolt.

1. Disengage wheel bolt caps with ascrewdriver and remove.Steel wheels with cover: Pull offthe wheel cover.Alloy wheels: Disengage wheelbolt caps with a screwdriver andremove. To protect the wheel,place a soft cloth between thescrewdriver and the alloy wheel.

2. Fold out the wheel wrench andinstall ensuring that it locates

securely and loosen each wheelbolt by half a turn.The wheels might be protected bylocking wheel bolts. To loosenthese specific bolts, first attachthe adapter for the locking wheelbolts onto the head of the boltbefore installing the wheelwrench. The adapter is located inthe load compartment under therear floor cover.

3. Ensure the jack is correctlypositioned under the relevantvehicle jacking point.

4. Set the jack to the necessaryheight. Position it directly belowthe jacking point in a manner thatprevents it from slipping.

204 Vehicle care

Ensure that the edge of the bodyfits into the notch of the jack.

Attach wheel wrench and with thejack correctly aligned rotate wheelwrench until wheel is clear of theground.

5. Unscrew the wheel bolts.6. Change the wheel. Spare wheel

3 204.7. Screw on the wheel bolts.8. Lower vehicle.9. Install the wheel wrench ensuring

that it locates securely and tighteneach bolt in a crosswisesequence. Tightening torque is110 Nm.

10. Align the valve hole in the wheelcover with the tyre valve beforeinstalling.Install wheel bolt caps.

11. Stow and secure the replacedwheel 3 204, the vehicle tools3 194 and the adapter for thelocking wheel bolts 3 63.

12. Check the tyre pressure of theinstalled tyre and the wheel bolttorque as soon as possible.

Have the defective tyre renewed orrepaired as soon as possible.

Jacking position for lifting platform

Rear arm position of the liftingplatform at the underbody.

Front arm position of the liftingplatform at the underbody.

Spare wheelMounting the temporary sparewheelOnly mount one temporary sparewheel. Do not drive faster than50 mph. Take curves slowly. Do notuse for a long period of time.

Vehicle care 205

Caution

The use of a spare wheel that issmaller than the other wheels or incombination with winter tyrescould affect driveability. Have thedefective tyre replaced as soon aspossible.

The temporary spare wheel has asteel rim.

The temporary spare wheel is locatedin the load compartment beneath thefloor covering.To remove:1. Open the floor cover.

2. The temporary spare wheel issecured with a wing nut. Turnwing nut anticlockwise andremove the wheel.There is a box with tools in theright wall of the loadcompartment. Vehicle tools3 194

3. When, after a wheel change, nowheel is placed in the spare wheelwell, secure the tool box byturning right back the wing nut andclose the floor cover.

4. After a wheel change back to a fullsize wheel, place the spare wheeloutside up in the well and securewith the wing nut.

If your vehicle gets a flat tyre on therear while towing another vehicle,mount the temporary spare wheel inthe front and the full tyre in the rear.Tyre chains 3 199.

Stowing a damaged full sizewheel in the load compartmentThe spare wheel well is not designedfor other tyre sizes than the temporaryspare wheel. A damaged full sizewheel must be stowed in the load

compartment and secured with astrap. Vehicle tools 3 194. To securethe wheel:1. Position the wheel outside up

close to one sidewall of the loadcompartment.

2. Place the loop end of the strapthrough the front lashing eye onthe appropriate side.

3. Place the hook end of the strapthrough the loop and pull it untilthe strap is fastened securely tothe lashing eye.

206 Vehicle care

4. Insert the strap through thespokes of the wheel as shown inthe illustration.

5. Mount the hook to the rear lashingeye.

6. Tighten the strap and secure itusing the buckle.

9 Danger

Always drive with folded up andengaged rear seat backrests whenstowing a damaged full size wheelin the load compartment.

Jump startingDo not start with quick charger.A vehicle with a discharged vehiclebattery can be started using jumpleads and the vehicle battery ofanother vehicle.

9 Warning

Be extremely careful when startingwith jump leads. Any deviationfrom the following instructions canlead to injuries or damage causedby battery explosion or damage tothe electrical systems of bothvehicles.

9 Warning

Avoid contact of the battery witheyes, skin, fabrics and paintedsurfaces. The fluid containssulphuric acid which can causeinjuries and damage in the eventof direct contact.

● Never expose the vehicle batteryto naked flames or sparks.

● A discharged vehicle battery canalready freeze at a temperatureof 0 °C. Defrost the frozen batterybefore connecting jump leads.

● Wear eye protection andprotective clothing whenhandling a battery.

● Use a booster battery with thesame voltage (12 Volts). Itscapacity (Ah) must not be muchless than that of the dischargedvehicle battery.

● Use jump leads with insulatedterminals and a cross section ofat least 16 mm2 (25 mm2 fordiesel engines).

● Do not disconnect the dischargedvehicle battery from the vehicle.

● Switch off all unnecessaryelectrical consumers.

● Do not lean over the vehiclebattery during jump starting.

● Do not allow the terminals of onelead to touch those of the otherlead.

Vehicle care 207

● The vehicles must not come intocontact with each other duringthe jump starting process.

● Apply the parking brake,transmission in neutral,automatic transmission in P.

Open the positive terminal protectioncaps of both vehicle batteries.Lead connection order:1. Connect the red lead to the

positive terminal of the boosterbattery.

2. Connect the other end of the redlead to the positive terminal of thedischarged battery.

3. Connect the black lead to thenegative terminal of the boosterbattery.

4. Connect the other end of the blacklead to a vehicle grounding pointof your vehicle in the enginecompartment.

Route the leads so that they cannotcatch on rotating parts in the enginecompartment.To start the engine:1. Start the engine of the vehicle

providing the jump.2. After five minutes, start the other

engine. Start attempts should bemade for no longer than15 seconds at an interval of oneminute.

3. Allow both engines to idle forapprox. three minutes with theleads connected.

4. Switch on electrical consumers(e.g. headlights, heated rearwindow) of the vehicle receivingthe jump start.

5. Reverse above sequence exactlywhen removing leads.

TowingTowing the vehicle

Insert a screwdriver in the slot at thebottom of the cap. Release the cap bycarefully moving the screwdriverdownwards.The towing eye is stowed with thevehicle tools 3 194.

208 Vehicle care

Screw in the towing eye as far as it willgo until it stops in a horizontalposition.Attach a tow rope – or better still a towrod – to the towing eye.The towing eye must only be used fortowing and not for recovering thevehicle.Switch on ignition to release steeringwheel lock and to permit operation ofbrake lights, horn and windscreenwiper.Transmission in neutral.

Caution

Drive slowly. Do not drive jerkily.Excessive tractive force candamage the vehicle.

When the engine is not running,considerably more force is needed tobrake and steer.To prevent the entry of exhaust gasesfrom the towing vehicle, switch on theair recirculation and close thewindows.Vehicles with manual transmissionand All-wheel drive: If the vehicle istowed with all four wheels on theground then there are no technicallimitations for speed and distance. Ifonly one axle has been raised, themaximum speed is 30 mph. There isno distance limitation.Vehicles with automatic transmissionand All-wheel drive: The vehicle mustbe towed facing forwards. If thevehicle is towed with all four wheelson the ground, the maximum speed is30 mph and for a maximum of30 miles. If the front axle has been

raised, the maximum speed is30 mph. There is no distancelimitation.Seek the assistance of a workshop.After towing, unscrew the towing eye.Iinsert cap with the outer flange intothe recess and fix cap by pushing.

Towing another vehicle

Insert a screwdriver in the slot at thebottom of the cap. Release the cap bycarefully moving the screwdriverdownwards.The towing eye is stowed with thevehicle tools 3 194.

Vehicle care 209

Screw in the towing eye as far as it willgo until it stops in a horizontalposition.The lashing eye at the rearunderneath the vehicle must never beused as a towing eye.Attach a tow rope – or better still a towrod – to the towing eye.The towing eye must only be used fortowing and not for recovering avehicle.

Caution

Drive slowly. Do not drive jerkily.Excessive tractive force candamage the vehicle.

After towing, unscrew the towing eye.Insert cap with the upper flange intothe recess and fix cap by pushing.

Appearance careExterior careLocksThe locks are lubricated at the factoryusing a high quality lock cylindergrease. Use a de-icing agent onlywhen absolutely necessary, as thishas a degreasing effect and impairslock function. After using a de-icingagent, have the locks regreased by aworkshop.

WashingThe paintwork of your vehicle isexposed to environmental influences.Wash and wax your vehicle regularly.When using automatic vehiclewashes, select a programme thatincludes waxing.Bird droppings, dead insects, resin,pollen and the like should be cleanedoff immediately, as they containaggressive constituents which cancause paint damage.

210 Vehicle care

If using a vehicle wash, comply withthe vehicle wash manufacturer'sinstructions. The windscreen wiperand rear window wiper must beswitched off. Remove antenna andexternal accessories such as roofracks etc.If you wash your vehicle by hand,make sure that the insides of thewheel housings are also thoroughlyrinsed out.Wax painted parts of the vehicleregularly.Clean edges and folds on openeddoors and the bonnet as well as theareas they cover.Clean bright metal mouldings with acleaning solution approved foraluminium to avoid damages.

Caution

Always use a cleaning agent witha pH value of four to nine.Do not use cleaning agents on hotsurfaces.

Do not clean the engine compartmentwith a steam-jet or high-pressure jetcleaner.Thoroughly rinse and leather-off thevehicle. Rinse leather frequently. Useseparate leathers for painted andglass surfaces: remnants of wax onthe windows will impair vision.Have the door hinges of all doorsgreased by a workshop.

Exterior lightsHeadlight and other light covers aremade of plastic. Do not use anyabrasive or caustic agents, do not usean ice scraper, and do not clean themdry.

Polishing and waxingWax the vehicle regularly (at thelatest when water no longer beads).Otherwise, the paintwork will dry out.Polishing is necessary only if the painthas become dull or if solid depositshave become attached to it.Paintwork polish with silicone forms aprotective film, making waxingunnecessary.

Plastic body parts must not be treatedwith wax or polishing agents.

Windows and windscreen wiperbladesUse a soft lint-free cloth or chamoisleather together with window cleanerand insect remover.When cleaning the rear window frominside, always wipe in parallel to theheating element to prevent damage.For mechanical removal of ice, use asharp-edged ice scraper. Press thescraper firmly against the glass sothat no dirt can get under it andscratch the glass.Clean smearing wiper blades with asoft cloth and window cleaner.Remove dirt residues from smearingwiper blades by using a soft cloth andwindow cleaner. Also make sure toremove any residues such as wax,insect residues and similar from thewindow.Ice residues, pollution and continuouswiping on dry windows will damage oreven destroy the wiper blades.

Vehicle care 211

Glass panelNever clean with solvents or abrasiveagents, fuels, aggressive media(e.g. paint cleaner, acetone-containing solutions etc.), acidic orhighly alkaline media or abrasivepads.

Wheels and tyresDo not use high-pressure jetcleaners.Clean rims with a pH-neutral wheelcleaner.Rims are painted and can be treatedwith the same agents as the body.

Paintwork damageRectify minor paintwork damage witha touch-up pen before rust forms.Have more extensive damage or rustareas repaired by a workshop.

UnderbodySome areas of the vehicle underbodyhave a PVC undercoating while othercritical areas have a durableprotective wax coating.

After the underbody is washed, checkthe underbody and have it waxed ifnecessary.Bitumen/rubber materials coulddamage the PVC coating. Haveunderbody work carried out by aworkshop.Before and after winter, wash theunderbody and have the protectivewax coating checked.

Liquid gas system

9 Danger

Liquid gas is heavier than air andcan collect in sink points.Take care when performing workat the underbody in a pit.

For painting work and when using adrying booth at a temperature above60 °C, the liquid gas tank must beremoved.Do not make any modifications to theliquid gas system.

Towing equipmentDo not clean the coupling ball bar witha steam-jet or high-pressure jetcleaner.

Interior careInterior and upholsteryOnly clean the vehicle interior,including the instrument panel fasciaand panelling, with a dry cloth orinterior cleaner.Clean the leather upholstery withclear water and a soft cloth. In case ofheavy soiling, use leather care.The instrument cluster and thedisplays should only be cleaned usinga soft damp cloth. If necessary use aweak soap solution.Clean fabric upholstery with avacuum cleaner and brush. Removestains with an upholstery cleaner.

212 Vehicle care

Clothing fabrics may not becolourfast. This could cause visiblediscolourations, especially on light-coloured upholstery. Removablestains and discolourations should becleaned as soon as possible.Clean seat belts with lukewarm wateror interior cleaner.

Caution

Close Velcro fasteners as openVelcro fasteners on clothing coulddamage seat upholstery.The same applies to clothing withsharp-edged objects, like zips orbelts or studded jeans.

Plastic and rubber partsPlastic and rubber parts can becleaned with the same cleaner asused to clean the body. Use interiorcleaner if necessary. Do not use anyother agent. Avoid solvents and petrolin particular. Do not use high-pressure jet cleaners.

Service and maintenance 213

Service andmaintenance

General information ................... 213Service information .................. 213

Recommended fluids, lubricantsand parts .................................... 215

Recommended fluids andlubricants ................................ 215

General informationService informationIn order to ensure economical andsafe vehicle operation and tomaintain the value of your vehicle, itis of vital importance that allmaintenance work is carried out at theproper intervals as specified.The detailed, up-to-date serviceschedule for your vehicle is availableat the workshop.Severe operating conditions exist ifone or more of the followingcircumstances occur frequently: Coldstarting, stop and go operation, e.g.for taxis and police vehicles, traileroperation, mountain driving, drivingon poor and sandy road surfaces,increased air pollution, presence ofairborne sand and high dust content,driving at high altitude and largevariations of temperature. Underthese severe operating conditions,certain service work may be requiredmore frequently than the regularservice interval.Service display 3 84.

Service intervals - country group 1Maintenance of your vehicle isrequired every 16,000 miles or afterone year, whichever occurs first,unless otherwise indicated in theservice display.These service intervals are valid forthe following countries:Andorra, Austria, Belgium, Cyprus,Denmark, Finland, France, Germany,Greece, Greenland, Iceland, Ireland,Italy, Liechtenstein, Luxembourg,Malta, Monaco, Netherlands,Norway, Portugal, San Marino, Spain,Sweden, Switzerland, UnitedKingdom.

Service intervals - country group 2Maintenance of your vehicleequipped with engine EB2DT orEB2DTS is required every10,000 miles or after one year,whichever occurs first, unlessotherwise indicated in the servicedisplay. Maintenance of your vehiclewith any other engine than mentionedbefore is required every16,000 miles or after one year,

214 Service and maintenance

whichever occurs first, unlessotherwise indicated in the servicedisplay.These service intervals are valid forthe following countries:Albania, Estonia, Latvia, Lithuania,Macedonia, Montenegro, Poland,Serbia, Slovenia.

Service intervals - country group 3Maintenance of your vehicleequipped with engine EB2DTS isrequired every 6,000 miles or afterone year, whichever occurs first,unless otherwise indicated in theservice display. Maintenance of yourvehicle equipped with engineEB2FDTM or EB2DT is requiredevery 10,000 miles or after one year,whichever occurs first, unlessotherwise indicated in the servicedisplay. Maintenance of your vehiclewith any other engine than mentionedbefore is required every16,000 miles or after one year,whichever occurs first, unlessotherwise indicated in the servicedisplay.

These service intervals are valid forthe following countries:Bosnia-Herzegovina, Bulgaria,Croatia, Czech Republic, Hungary,Romania, Slovakia.

Service intervals - country group 4Maintenance of your vehicle isrequired every 6,000 miles or afterone year, whichever occurs first,unless otherwise indicated in theservice display.These service intervals are valid forthe countries which are not listed incountry group 1, 2 or 3.

ConfirmationsConfirmation of service is recorded inthe Service and warranty booklet.The date and mileage is completedwith the stamp and signature of theservicing workshop.Make sure that the Service andwarranty booklet is completedcorrectly as continuous proof ofservice is essential if any warranty or

goodwill claims are to be met, and isalso a benefit when selling thevehicle.

Service and maintenance 215

Recommended fluids,lubricants and partsRecommended fluids andlubricantsOnly use products that meet therecommended specifications.

9 Warning

Operating materials arehazardous and could bepoisonous. Handle with care. Payattention to information given onthe containers.

Engine oilEngine oil is identified by its qualityand its viscosity. Quality is moreimportant than viscosity whenselecting which engine oil to use. Theoil quality ensures e.g. enginecleanliness, wear protection and oilaging control, whereas viscositygrade gives information on the oil'sthickness over a temperature range.

Dexos is the newest engine oil qualitythat provides optimum protection forgasoline and diesel engines. If it isunavailable, engine oils of other listedqualities have to be used.Recommendations for gasolineengines are also valid forCompressed Natural Gas (CNG),Liquified Petroleum Gas (LPG) andEthanol (E85) fuelled engines.Select the appropriate engine oilbased on its quality and on theminimum ambient temperature3 219.

Topping up engine oil

Caution

In case of any spilled oil, wipe it upand dispose it properly.

Engine oils of different manufacturersand brands can be mixed as long asthey comply with the required engineoil quality and viscosity.

Use of engine oil with onlyACEA A1/B1 or only A5/B5 quality isprohibited, since it can cause long-term engine damage under certainoperating conditions.Select the appropriate engine oilbased on its quality and on theminimum ambient temperature3 219.

Additional engine oil additivesThe use of additional engine oiladditives could cause damage andinvalidate the warranty.

Engine oil viscosity gradesThe SAE viscosity grade givesinformation of the thickness of the oil.Multigrade oil is indicated by twofigures, e.g. SAE 5W-30. The firstfigure, followed by a W, indicates thelow temperature viscosity and thesecond figure the high temperatureviscosity.Select the appropriate viscosity gradedepending on the minimum ambienttemperature 3 219.

216 Service and maintenance

All of the recommended viscositygrades are suitable for high ambienttemperatures.

Coolant and antifreezeUse only organic acid type-long lifecoolant (LLC) antifreeze approved forthe vehicle. Consult a workshop.The system is factory filled withcoolant designed for excellentcorrosion protection and frostprotection down to approx. -37 °C.This concentration should bemaintained all year round. The use ofadditional coolant additives thatintend to give additional corrosionprotection or seal against minor leakscan cause function problems. Liabilityfor consequences resulting from theuse of additional coolant additives willbe rejected.

Washer fluidUse only washer fluid approved forthe vehicle to prevent damage ofwiper blades, paintwork, plastic andrubber parts. Consult a workshop.

Brake and clutch fluidOver time, brake fluid absorbsmoisture which will reduce brakingeffectiveness. The brake fluid shouldtherefore be replaced at the specifiedinterval.

Technical data 217

Technical data

Vehicle identification .................. 217Vehicle Identification Number .. 217Identification plate ................... 217Engine identification ................ 218

Vehicle data ............................... 219Recommended fluids andlubricants ................................ 219

Engine data ............................. 222Performance ............................ 224Vehicle weight ......................... 225Vehicle dimensions ................. 225Capacities ................................ 227Tyre pressures ........................ 228

Vehicle identificationVehicle IdentificationNumber

The Vehicle Identification Numbermay be stamped on the identificationplate and on the floor pan, under thefloor covering, visible under a cover.The Vehicle Identification Numbermay be embossed on the instrumentpanel, visible through the windscreen,or in the engine compartment on theright body panel.

Identification plate

The identification plate is located onthe front left or right door frame.

218 Technical data

Information on identification label:1 : manufacturer2 : type approval number3 : vehicle identification number4 : permissible gross vehicle weight

rating in kg5 : permissible gross train weight

in kg6 : maximum permissible front axle

load in kg7 : maximum permissible rear axle

load in kg8 : vehicle-specific or country-

specific data

The combined total of front and rearaxle loads must not exceed thepermissible gross vehicle weight. Forexample, if the front axle is bearing itsmaximum permissible load, the rearaxle can only bear a load that is equalto the gross vehicle weight minus thefront axle load.The technical data is determined inaccordance with EuropeanCommunity standards. We reservethe right to make modifications.Specifications in the vehicledocuments always have priority overthose given in this manual.

Engine identificationThe technical data tables show theengine identifier code. Engine data3 222.To identify the respective engine,refer to the engine power in the EECCertificate of Conformity providedwith your vehicle or other nationalregistration documents.

Technical data 219

Vehicle dataRecommended fluids and lubricantsEuropean service schedule

Required engine oil qualityAll European countries with European service interval 3 213

Engine oil quality Petrol engines(including CNG, LPG, E85)

Diesel engines

dexos1 GEN2 ✔ –

dexos2 – ✔

Just for Diesel engines: In case dexos quality is unavailable, you may use max. one litre engine oil quality ACEA C3 oncebetween each oil change.

Engine oil viscosity gradesAll European countries with European service interval 3 213

Ambient temperature Petrol and diesel engines

down to -25 °C SAE 0W-30 or SAE 0W-40

SAE 5W-30 or SAE 5W-40

below -25 °C SAE 0W-30 or SAE 0W-40

220 Technical data

International service schedule

Required engine oil qualityAll countries with international service interval 3 213


Diesel engines

dexos1 GEN2 ✔ –

dexos2 – ✔

In case dexos quality is unavailable you may use the oil qualities listed below:

All countries with international service interval 3 213


Diesel engines

ACEA A3/B4 – ✔

ACEA C3 – ✔

Engine oil viscosity gradesAll countries with international service interval 3 213

Ambient temperature Petrol and diesel engines

down to -25 °C SAE 0W-30 or SAE 0W-40

SAE 5W-30 or SAE 5W-40

Technical data 221

All countries with international service interval 3 213

below -25 °C SAE 0W-30 or SAE 0W-40

down to -20 °C SAE 10W-301) or SAE 10W-40 1)

1) Permitted, but usage of oils with dexos quality is recommended.

222 Technical data

Engine dataEngine identifier code B12xE B12xHT B12xHTSales designation 1.2 1.2 Turbo 1.2 TurboEngineering code EB2F EB2DT EB2DTS

Piston displacement [cm3] 1199 1199 1199

Engine power [kW] 60 81 96

at rpm 5750 5500 5500

Torque [Nm] 118 205 230

at rpm 2750 1500 1750

Fuel type Petrol Petrol Petrol

Octane rating RON2)

recommended 95 95 95

possible 98 98 98

Additional fuel type – – –

2) A country-specific label at the fuel filler flap can supersede the engine-specific requirement.

Technical data 223

Engine identifier code B16DT B16DTH B16DTHSales designation 1.6 1.6 1.6Engineering code DV6FD DV6FC DV6FC

Piston displacement [cm3] 1560 1560 1560

Engine power [kW] 73 85 88

at rpm 3750 3500 3500

Torque [Nm] 254 300 300

at rpm 1750 1750 1750

Fuel type Diesel Diesel Diesel

Additional fuel type – – –

224 Technical data

PerformanceEngine B12xE B12xHT B12xHT

Maximum speed [mph]

Manual transmission 106 1173) 1284)

Automatic transmission – 116 –

3) 5-gear transmission4) 6-gear transmission

Engine B16DT B16DTH

Maximum speed [mph]

Manual transmission 112 116

Automatic transmission – –

Technical data 225

Vehicle weightKerb weight, basic model without any optional equipment

Engine Manualtransmission

Automatictransmission

without/withair conditioning[kg]

B12xE 1163/1174 –

B12xHT 1234/12455) 1278/1289

B12xHT 1263/12746) –

B16DT 1278/1289 –

B16DTH 1306/1319 –

5) 5-gear transmission6) 6-gear transmission

Optional equipment and accessories increase the kerb weight.Loading information 3 70.Vehicle dimensions

Crossland X

Length [mm] 4212

Width without exterior mirrors [mm] 1765

Width with two exterior mirrors [mm] 1976

226 Technical data

Crossland X

Width with two exterior mirrors folded [mm] 1825

Height (without antenna) [mm] 1597

Length of load compartment floor [mm] 793

Length of load compartment with folded rear seats [mm] 1483

Load compartment width [mm] 947

Load compartment height with cover [mm] 584

Load compartment height without cover [mm] 894

Height of load compartment opening [mm] 712

Wheelbase [mm] 2604

Turning circle diameter [m] 11.2

Technical data 227

CapacitiesEngine oil

Engine B12xE B12xHT B16DT B16DTH

including Filter [l] 3.25 3.5 3.75 3.75

between MIN and MAX [l] 1.0 1.0 1.0 1.5

Fuel tank

Petrol/diesel, refilling quantity [l] 45

AdBlue tank

AdBlue, refilling quantity [l] 14.8

228 Technical data

Tyre pressuresComfort with up to 3 people ECO with up to 3 people With full load

Engine Tyres front rear front rear front rear[kPa/bar]([psi])

[kPa/bar]([psi])

[kPa/bar]([psi])

[kPa/bar]([psi])

[kPa/bar]([psi])

[kPa/bar]([psi])

B12xE,B12xHT,

195/65 R15 91T,195/60 R16 89H

230/2.3 (33) 230/2.3 (33) 250/2.5 (36) 250/2.5 (36) 240/2.4 (35) 290/2.9 (42)

215/50 R17 91H 230/2.3 (33) 230/2.3 (33) 250/2.5 (36) 250/2.5 (36) 240/2.4 (35) 270/2.7 (39)

205/60 R16 92H 230/2.3 (33) 230/2.3 (33) 250/2.5 (36) 250/2.5 (36) 240/2.4 (35) 270/2.7 (39)

B12xHT7) 195/60 R16 89H 230/2.3 (33) 230/2.3 (33) 250/2.5 (36) 250/2.5 (36) 240/2.4 (35) 290/2.9 (42)

215/50 R17 91H 230/2.3 (33) 230/2.3 (33) 250/2.5 (36) 250/2.5 (36) 240/2.4 (35) 270/2.7 (39)

205/60 R16 92H 230/2.3 (33) 230/2.3 (33) 250/2.5 (36) 250/2.5 (36) 240/2.4 (35) 270/2.7 (39)

B16DT 195/65 R15 91T,195/60 R16 89H

230/2.3 (33) 230/2.3 (33) 250/2.5 (36) 250/2.5 (36) 240/2.4 (35) 290/2.9 (42)

215/50 R17 91H 230/2.3 (33) 230/2.3 (33) 250/2.5 (36) 250/2.5 (36) 240/2.4 (35) 270/2.7 (39)

205/60 R16 92H 230/2.3 (33) 230/2.3 (33) 250/2.5 (36) 250/2.5 (36) 240/2.4 (35) 270/2.7 (39)

Technical data 229

Comfort with up to 3 people ECO with up to 3 people With full loadEngine Tyres front rear front rear front rear

[kPa/bar]([psi])

[kPa/bar]([psi])

[kPa/bar]([psi])

[kPa/bar]([psi])

[kPa/bar]([psi])

[kPa/bar]([psi])

B16DTH 195/60 R16 89H 230/2.3 (33) 230/2.3 (33) 250/2.5 (36) 250/2.5 (36) 240/2.4 (35) 290/2.9 (42)

215/50 R17 91H 230/2.3 (33) 230/2.3 (33) 250/2.5 (36) 250/2.5 (36) 240/2.4 (35) 270/2.7 (39)

205/60 R16 92H 230/2.3 (33) 230/2.3 (33) 250/2.5 (36) 250/2.5 (36) 240/2.4 (35) 270/2.7 (39)

All Temporary sparewheel125/85 R16

420/4.2 (60) 420/4.2 (60) – – 420/4.2 (60) 420/4.2 (60)

7) 6-gear manual transmission / 96kW

230 Customer information

Customerinformation

Customer information ................ 230Declaration of conformity ......... 230Collision damage repair ........... 232Software acknowledgement .... 232Software update ...................... 234Registered trademarks ............ 234

Vehicle data recording and pri‐vacy ........................................... 235

Event data recorders ............... 235Radio Frequency Identification(RFID) ..................................... 236

Customer informationDeclaration of conformityRadio transmission systemsThis vehicle has systems thattransmit and/or receive radio wavessubject to Directive 1999/5/EC or2014/53/EU. These systems are incompliance with the essentialrequirements and other relevantprovisions of Directive 1999/5/EC or2014/53/EU. Copies of the originalDeclarations of Conformity can beobtained on our website.

Customer information 231

Jack


Translation of the original declarationof conformityDeclaration of conformity accordingto EC Directive 2006/42/ECWe declare that the product:Product designation: JackType/GM part number: 3637376Type/PSA part number: 9649243380is in compliance with the provisions ofDirective 2006/42/EC.Applied technical standards:GMN9737 : jackingGM 14337 : standard equipment

jack – hardwaretests

GMW15005 : standard equipmentjack and spare tyre,vehicle test

ISO TS 16949 : qualitymanagementsystems

The signatory is authorised tocompile the technical documentation.Rüsselsheim, 13th December 2016signed byAndré-Alexander KonterEngineering Group Manager Tyreand Wheel SystemsAdam Opel AGD-65423 Rüsselsheim

Collision damage repairPaint thicknessDue to production techniques, thethickness of the paint can varybetween 50 and 400 µm.Therefore, different paint thickness isno indicator for a collision damagerepair.

Software acknowledgementCertain OnStar components includelibcurl and unzip software and otherthird party software. Below are thenotices and licenses associated withlibcurl and unzip and for other thirdparty software please see http://www.lg.com/global/support/opensource/index.

libcurlCopyright and permission noticeCopyright (c) 1996 - 2010, DanielStenberg, <[email protected]>.All rights reserved.Permission to use, copy, modify, anddistribute this software for anypurpose with or without fee is herebygranted, provided that the abovecopyright notice and this permissionnotice appear in all copies.The software is provided "as is",without warranty of any kind, expressor implied, including but not limited tothe warranties of merchantability,fitness for a particular purpose andnoninfringement of third party rights.In no event shall the authors or


copyright holders be liable for anyclaim, damages or other liability,whether in an action of contract, tortor otherwise, arising from, out of or inconnection with the software or theuse or other dealings in the software.Except as contained in this notice, thename of a copyright holder shall notbe used in advertising or otherwise topromote the sale, use or otherdealings in this Software without priorwritten authorization of the copyrightholder.

unzipThis is version 2005-Feb-10 of theInfo-ZIP copyright and license. Thedefinitive version of this documentshould be available at ftp://ftp.info-zip.org/pub/infozip/license.htmlindefinitely.Copyright (c) 1990-2005 Info-ZIP. Allrights reserved.For the purposes of this copyright andlicense, “Info-ZIP” is defined as thefollowing set of individuals:Mark Adler, John Bush, Karl Davis,Harald Denker, Jean-Michel Dubois,Jean-loup Gailly, Hunter Goatley, Ed

Gordon, Ian Gorman, Chris Herborth,Dirk Haase, Greg Hartwig, RobertHeath, Jonathan Hudson, PaulKienitz, David Kirschbaum, JohnnyLee, Onno van der Linden, IgorMandrichenko, Steve P. Miller, SergioMonesi, Keith Owens, GeorgePetrov, Greg Roelofs, Kai UweRommel, Steve Salisbury, DaveSmith, Steven M. Schweda, ChristianSpieler, Cosmin Truta, AntoineVerheijen, Paul von Behren, RichWales, Mike White.This software is provided “as is,”without warranty of any kind, expressor implied. In no event shall Info-ZIPor its contributors be held liable forany direct, indirect, incidental, specialor consequential damages arising outof the use of or inability to use thissoftware.Permission is granted to anyone touse this software for any purpose,including commercial applications,and to alter it and redistribute it freely,subject to the following restrictions:

1. Redistributions of source codemust retain the above copyrightnotice, definition, disclaimer, andthis list of conditions.

2. Redistributions in binary form(compiled executables) mustreproduce the above copyrightnotice, definition, disclaimer, andthis list of conditions indocumentation and/or othermaterials provided with thedistribution. The sole exception tothis condition is redistribution of astandard UnZipSFX binary(including SFXWiz) as part of aself-extracting archive; that ispermitted without inclusion of thislicense, as long as the normalSFX banner has not beenremoved from the binary ordisabled.

3. Altered versions--including, butnot limited to, ports to newoperating systems, existing portswith new graphical interfaces, anddynamic, shared, or static libraryversions--must be plainly markedas such and must not bemisrepresented as being the


original source. Such alteredversions also must not bemisrepresented as being Info-ZIPreleases--including, but notlimited to, labeling of the alteredversions with the names “Info-ZIP” (or any variation thereof,including, but not limited to,different capitalizations), “PocketUnZip,” “WiZ” or “MacZip” withoutthe explicit permission of Info-ZIP.Such altered versions are furtherprohibited from misrepresentativeuse of the Zip-Bugs or Info-ZIP e-mail addresses or of the Info-ZIPURL(s).

4. Info-ZIP retains the right to usethe names “Info-ZIP,” “Zip,”“UnZip,” “UnZipSFX,” “WiZ,”“Pocket UnZip,” “Pocket Zip,” and“MacZip” for its own source andbinary releases.

Software updateThe Infotainment system candownload and install selectedsoftware updates over a wirelessconnection.

NoticeThe availability of these over-the-airvehicle software updates varies byvehicle and country. Find moreinformation on our home page.

Internet connectionDownloading over-the-air vehiclesoftware updates requires internetconnectivity, which can be accessedthrough the vehicle's built-in OnStarconnection or another password-protected Wi-Fi hotspot, e.g. providedby a mobile phone.To connect the Infotainment systemto a hotspot, select Settings on thehome screen, Wi-Fi and then ManageWi-Fi Networks. Select the desiredWi-Fi network, and follow the on-screen prompts.

UpdatesThe system will prompt for certainupdates to be downloaded andinstalled. There is also an option tocheck for updates manually.

To manually check for updates, selectSettings on the home screen,Software Information and thenSystem Update. Follow the on-screenprompts.NoticeSteps for downloading and installingupdates may vary by vehicle.NoticeDuring the installation process, thevehicle may not be operational.

Registered trademarksApple Inc.Apple CarPlay™ is a trademark ofApple Inc.App Store® and iTunes Store® areregistered trademarks of Apple Inc.iPhone®, iPod®, iPod touch®, iPodnano®, iPad® and Siri® are registeredtrademarks of Apple Inc.Bluetooth SIG, Inc.Bluetooth® is a registered trademarkof Bluetooth SIG, Inc.DivX, LLCDivX® and DivX Certified® areregistered trademarks of DivX, LLC.


EnGIS Technologies, Inc.BringGo® is a registered trademark ofEnGIS Technologies, Inc.Google Inc.Android™ and Google Play™ Storeare trademarks of Google Inc.Stitcher Inc.Stitcher™ is a trademark of Stitcher,Inc.Verband der Automobilindustrie e.V.AdBlue® is a registered trademark ofthe VDA.

Vehicle data recordingand privacyEvent data recordersData storage modules in thevehicleA large number of electroniccomponents of your vehicle containdata storage modules temporarily orpermanently storing technical dataabout the condition of the vehicle,events and errors. In general, thistechnical information documents thecondition of parts, modules, systemsor the environment:● operating conditions of system

components (e.g. filling levels)● status messages of the vehicle

and its single components (e.g.number of wheel revolutions /rotational speed, deceleration,lateral acceleration)

● dysfunctions and defects inimportant system components

● vehicle reactions in particulardriving situations (e.g. inflation ofan airbag, activation of thestability regulation system)

● environmental conditions (e.g.temperature)

These data are exclusively technicaland help identifying and correctingerrors as well as optimising vehiclefunctions.Motion profiles indicating travelledroutes cannot be created with thesedata.If services are used (e.g. repairworks, service processes, warrantycases, quality assurance),employees of the service network(manufacturer included) are able toread out this technical informationfrom the event and error data storagemodules applying special diagnosticdevices. If required, you will receivefurther information at theseworkshops. After an error has beencorrected, the data are deleted fromthe error storage module or they areconstantly overwritten.


When using the vehicle, situationsmay occur in which these technicaldata related to other information(accident report, damages on thevehicle, witness statements etc.) maybe associated with a specific person -possibly, with the assistance of anexpert.Additional functions contractuallyagreed upon with the client (e.g.vehicle location in emergency cases)allow the transmission of particularvehicle data from the vehicle.

Radio FrequencyIdentification (RFID)RFID technology is used in somevehicles for functions such as tyrepressure monitoring and ignitionsystem security. It is also used inconnection with conveniences suchas radio remote controls for doorlocking/unlocking and starting, and in-vehicle transmitters for garage dooropeners. RFID technology inVauxhall vehicles does not use orrecord personal information or linkwith any other Vauxhall systemcontaining personal information.

238

Index AAccessories and vehicle

modifications .......................... 174Adaptive forward lighting ........... 108AdBlue.................................. 89, 136Adjustable air vents ................... 123Advanced parking assist............ 153Airbag and belt tensioners ........... 86Airbag deactivation ................ 55, 87Airbag label................................... 51Airbag system .............................. 51Air conditioning regular

operation ................................ 125Air conditioning system .............. 115Air intake .................................... 124Air vents...................................... 123Antilock brake system ................ 143Antilock brake system (ABS) ....... 88Anti-theft alarm system ................ 32Anti-theft locking system .............. 31Appearance care........................ 209Armrest................................... 46, 47Ashtrays ....................................... 78Automatic anti-dazzle .................. 36Automatic light control ............... 107Automatic locking ........................ 28Automatic transmission ............. 139Autostop............................... 90, 131Auxiliary heater........................... 122

BBattery discharge protection ...... 113Battery voltage ............................. 98Belts.............................................. 48BlueInjection............................... 136Bonnet ....................................... 176Brake and clutch fluid................. 215Brake and clutch system ............. 88Brake assist ............................... 144Brake fluid .................................. 179Brakes ............................... 143, 179Breakdown.................................. 207Bulb replacement ....................... 182

CCapacities .................................. 227Catalytic converter ..................... 136Central locking system ................ 24Centre console lighting .............. 113Centre console storage ............... 64Changing tyre and wheel size . . . 198Charging system .......................... 87Child locks ................................... 29Child restraint installation

locations ................................... 60Child restraints.............................. 57Child restraint systems ................ 57Climate control ............................. 15Climate control systems............. 114Clock............................................. 77

239

Collision damage repair.............. 232Control indicators.......................... 85Control of the vehicle ................. 127Controls........................................ 73Convex shape .............................. 34Coolant and antifreeze............... 215Cruise control ...................... 91, 146Cupholders .................................. 63Curtain airbag system .................. 55

DDanger, Warnings and Cautions . . . 4Daytime running lights ............... 108Declaration of conformity............ 230DEF............................................ 136Deflation detection system........... 90Diesel exhaust fluid.................... 136Diesel fuel system bleeding ....... 181Diesel particle filter............... 89, 135Door open .................................... 91Doors............................................ 30Driver alert.................................. 165Driver assistance systems.......... 146Driver Information Centre............. 92Driving characteristics and

towing tips .............................. 169Driving hints................................ 127

EElectric adjustment ...................... 34Electrical system......................... 189

Electronic climate control system 118Electronic driving programmes . . 141Electronic key system................... 23Electronic Stability Control and

Traction Control system.... 89, 145Electronic Stability Control and

Traction Control system off....... 89End-of-life vehicle recovery ....... 175Engine compartment fuse box ... 190Engine coolant ........................... 178Engine coolant temperature ........ 89Engine coolant temperature

gauge ....................................... 84Engine data ............................... 222Engine exhaust .......................... 135Engine identification................... 218Engine oil ................... 177, 215, 219Engine oil pressure ...................... 90Entry lighting .............................. 113Event data recorders.................. 235Exit lighting ................................ 113Exterior care .............................. 209Exterior light ................................. 90Exterior lighting .................... 12, 106Exterior mirrors............................. 34

FFault ........................................... 141First aid......................................... 69First aid kit ................................... 69

Fixed air vents ........................... 124Fog light ....................................... 91Fog lights ................................... 184Folding mirrors ............................. 35Front airbag system ..................... 54Front fog lights ........................... 110Front seats.................................... 43Fuel............................................. 166Fuel consumption - CO2-

Emissions ............................... 168Fuel for diesel engines .............. 167Fuel for petrol engines ............... 166Fuel gauge ................................... 84Funnel......................................... 167Fuses ......................................... 189

GGauges......................................... 82Gear shifting................................. 88General information ................... 169Glass panel .................................. 40Glovebox ..................................... 63

HHalogen headlights .................... 182Hand brake......................... 143, 144Hazard warning flashers ............ 109Headlight flash ........................... 107Headlight range adjustment ...... 108Headlights................................... 106Head restraint adjustment ............. 8

240

Head restraints ............................ 42Head-up display............................ 96Heated mirrors ............................. 35Heated rear window ..................... 38Heated steering wheel ................. 73Heated windscreen....................... 39Heating ........................................ 46Heating and ventilation system . 114High beam ........................... 91, 107High beam assist.......................... 91Hill start assist ........................... 144Horn ....................................... 13, 74

IIdentification plate ..................... 217Ignition switch positions ............. 127Immobiliser .................................. 34Indicators...................................... 82Inductive charging........................ 78Info display................................... 94Instrument cluster ........................ 79Instrument panel fuse box ......... 192Instrument panel illumination ..... 189Instrument panel illumination

control .................................... 111Instrument panel overview ........... 10Interior care ............................... 211Interior lighting............................ 111Interior lights ...................... 112, 189Interior mirrors.............................. 36

Interruption of power supply ...... 141Introduction .................................... 3

JJump starting ............................. 206

KKeys ............................................. 21Keys, locks................................... 21

LLane departure warning....... 88, 164Lashing eyes ............................... 68LED headlights........................... 184Lighting features......................... 113Light switch ................................ 106Load compartment ................ 30, 64Load compartment cover ............. 67Loading information ..................... 70Low beam..................................... 91Low fuel ....................................... 90

MMalfunction indicator light ............ 87Manual anti-dazzle ...................... 36Manual mode ............................. 140Manual transmission .................. 142Mirror adjustment ........................... 9Misted light covers ..................... 111

NNew vehicle running-in .............. 127Number plate light ..................... 189

OObject detection systems........... 150Odometer ..................................... 83Oil, engine.......................... 215, 219OnStar........................................ 102Outside temperature .................... 76Overrun cut-off ........................... 131

PPanoramic view system.............. 160Parking ................................ 19, 134Parking assist ............................ 150Parking brake ............................ 144Parking lights ............................. 111Particulate filter........................... 135Performance .............................. 224Performing work ........................ 176Power button.............................. 128Power outlets ............................... 77Power saving mode.................... 129Power windows ............................ 37Preheating ................................... 89Puncture..................................... 202

QQuickheat................................... 122

241

RRadio Frequency Identification

(RFID)..................................... 236Radio remote control ................... 22Rain sensor.................................. 91Reading lights ............................ 112Rear floor storage cover .............. 67Rear fog light ....................... 91, 110Rear seats.................................... 47Rear view camera ...................... 162Rear window wiper/washer .......... 76Recommended fluids and

lubricants ........................ 215, 219Refuelling ................................... 167Registered trademarks............... 234Reversing lights ......................... 111Ride control systems.................. 145Roof.............................................. 40Roof load...................................... 70Roof rack ..................................... 70

SSafety belts................................... 48Seat adjustment ....................... 7, 44Seat belt ........................................ 8Seat belt reminder ....................... 86Seat belts ..................................... 48Seat heating................................. 46Seat position ................................ 43Selective catalytic reduction....... 136

Selector lever ............................. 139Service ............................... 125, 213Service display ............................ 84Service information .................... 213Service vehicle soon .................... 87Side airbag system ...................... 54Side blind spot alert.................... 158Sidelights.................................... 106Side turn signal lights ................ 188Software acknowledgement....... 232Software update......................... 234Spare wheel ............................... 204Speed limiter......................... 91, 148Speedometer ............................... 82Starting and operating................ 127Starting off ................................... 17Starting the engine .................... 130Steering...................................... 127Steering wheel adjustment ...... 9, 73Steering wheel controls ............... 73Stop engine.................................. 87Stop-start system........................ 131Storage......................................... 63Storage compartments................. 63Sunvisor lights ........................... 112Sun visors .................................... 40Symbols ......................................... 4System check............................... 88

TTachometer ................................. 83Tail lights ................................... 185Three-point seat belt .................... 49Tools .......................................... 194Tow bar....................................... 169Towing................................ 169, 207Towing another vehicle ............. 208Towing equipment ..................... 170Towing the vehicle ..................... 207Traffic sign assistant..................... 91Trailer coupling........................... 169Trailer towing ............................. 170Transmission ............................... 16Transmission display ................. 139Tread depth ............................... 197Trip odometer .............................. 83Turn and lane-change signals ... 110Turn signal ................................... 85Tyre chains ................................ 199Tyre deflation detection system . 196Tyre designations ...................... 195Tyre pressure ............................ 195Tyre pressures ........................... 228Tyre repair kit ............................. 199

UUltrasonic parking assist............. 150Upholstery.................................. 211Using this manual .......................... 3

242

VValet mode................................... 94Vehicle battery ........................... 179Vehicle checks............................ 176Vehicle data................................ 219Vehicle data recording and

privacy..................................... 235Vehicle dimensions .................... 225Vehicle Identification Number .... 217Vehicle jack................................ 194Vehicle messages ....................... 97Vehicle personalisation ............... 99Vehicle security............................ 31Vehicle specific data ...................... 3Vehicle storage........................... 175Vehicle tools............................... 194Vehicle unlocking ........................... 6Vehicle weight ........................... 225Ventilation................................... 114

WWarning chimes ........................... 98Warning lights............................... 82Warning triangle .......................... 69Washer and wiper systems ......... 13Washer fluid ............................... 178Wheel changing ......................... 202Wheel covers ............................. 198Wheels and tyres ....................... 195Windows....................................... 36

Windscreen................................... 36Windscreen wiper/washer ........... 74Winter tyres ............................... 195Wiper blade replacement .......... 181

Copyright by General Motors UK Ltd.

The information contained in this publication is effective as of the date indicated below. General Motors UK Ltd. reserves the right to make changes to the technical specifications,features and design of the vehicles relative to the information contained in this publication, as well as changes to the publication itself.

Edition: April 2017, General Motors UK Ltd.

Printed on chlorine-free bleached paper.

*ID-VCDAORIE1704-EN*

ID-VCDAORIE1704-en

vauxhall crossland x owner's manual...pull handle, slide seat, release handle. try to move the...

Documents