vandayar engineering...
TRANSCRIPT
VANDAYAR ENGINEERING COLLEGE- Pulavarnatham (PO), Mariamman Kovil (Via), Thanjavur.
DEPARTMENT OF MECHANICAL ENGINEERING
M.E. MANUFACTURING ENGINEERING
SECOND SEMESTER
2016 – 2017
MF7211 AUTOMATION AND METAL FORMING LAB
LAB RECORD
NAME : ----------------------------------
REG. NO. : ----------------------------------
VANDAYAR ENGINEERING COLLEGE
Pulavarnatham (PO), Mariamman Kovil (Via), Thanjavur.
BONAFIDE CERTIFICATE
REGISTER NO.: -----------------------------
Certified to be the bonafide record of work done by-----------------------------------, M.E Manufacturing Engineering II Semester, MF7211 AUTOMATION AND METAL
FORMING LAB during the year of 2016-2017.
Head of the Department Staff-in-charge
Submitted for practical examination held in ------------------ at Vandayar Engineering College, Thanjavur INTERNAL EXAMINER EXTERNAL EXAMINER
S.NO DATE EXPERIMENT PAGE MARKS SIGN
NO
EX.NO: 01 SIMULATION OF SINGLE ACTING CYLINDER CIRCUIT
DATE:
AIM:
To simulate the single acting cylinder circuit by using fliudsim software.
APPARATUS REQUIRED:
1. CPU, Monitor
2. Keyboard and Mouse
3. FLIUDSIM Software
PROCEDURE:
1. Fluid sim software icon is available is the desktop by double clicking the icon.
2. The software home page will open, click new for creating the blank page.
3. Side of the wizard tool is available by using tool use drown the circuit.
4. In the tool symbols, just trag the symbol to the sheet which are the element are necessary
such as (pneumatic –supply element actuator values) compressor, 3/2 mechanically
operated spring controlled direction controlled valve and single acting cylinder.
5. Then correct the ports according to the circuit.
6. Finally simulate by using the simulation tool.
RESULT:
Thus the simulation of the single acting cylinder circuit is simulated by using fliudsim
software.
EX.NO: 02 SIMULATION OF DOUBLE ACTING CYLINDER CIRCUIT
DATE:
AIM:
To simulate the double acting cylinder circuit by using fliudsim software.
APPARATUS REQUIRED:
1. CPU and Monitor
2. Keyboard and Mouse
3. FLIUDSIM Software
PROCEDURE:
1. Fluid sim software icon is available is the desktop by double clicking the icon.
2. The software home page will open, click new for creating the blank page.
3. Side of the wizard tool is available by using tool use drown the circuit.
4. In the tool symbols, just trag the symbol to the sheet which are the element are necessary
such as (pneumatic –supply element actuator values) compressor, 3/2 mechanically
operated spring controlled direction controlled valve and single acting cylinder.
5. Then correct the ports according to the circuit.
6. Finally simulate by using the simulation tool.
RESULT:
Thus the simulation of the double acting cylinder circuit is simulated by using fliudsim
software.
EX.NO: 03 SIMULATION OF SIMPLE HYDRAULIC CIRCUIT
DATE:
AIM:
To simulate the simple hydraulic circuit by using fliudsim software.
APPARATUS REQUIRED:
1. CPU and Monitor
2. Keyboard and Mouse
3. FLIUDSIM Software
PROCEDURE:
1. Fluid sim software icon is available is the desktop by double clicking the icon.
2. The software home page will open, click new for creating the blank page.
3. Side of the wizard tool is available by using tool use drown the circuit.
4. In the tool symbols, just trag the symbol to the sheet which are the element are necessary
such as (simple hydraulic circuit –supply element actuator values) compressor, 3/2
mechanically operated spring controlled direction controlled valve and single acting cylinder.
5. Then correct the ports according to the circuit.
4. Finally simulate by using the simulation tool.
RESULT:
Thus the simulation of the simple hydraulic circuit is simulated by using fliudsim software.
EX.NO: 04 SIMULATION OF SIMPLE PNEUMATIC CIRCUIT
DATE:
AIM:
To simulate the simple pneumatic circuit by using fliudsim software.
APPARATUS REQUIRED:
1. CPU and Monitor
2. Keyboard and Mouse
3. FLIUDSIM Software
PROCEDURE:
1. Fluidsim software icon is available is the desktop by double clicking the icon.
2. The software home page will open, click new for creating the blank page.
3. Side of the wizard tool is available by using tool use drown the circuit.
4. In the tool symbols, just trag the symbol to the sheet which are the element are necessary
such as (pneumatic –supply element actuator values) compressor, 3/2 mechanically operated
spring controlled direction controlled valve and single acting cylinder.
5. Then correct the ports according to the circuit.
6. Finally simulate by using the simulation tool.
RESULT:
Thus the simulation of the simple pneumatic circuit is simulated by using fliudsim software.
EX.NO: 05 SIMULATION OF ELECTRO HYDRAULIC CIRCUIT
DATE:
AIM:
To simulate the electro hydraulic circuit by using fliudsim software.
APPARATUS REQUIRED:
1. CPU and Monitor
2. Keyboard and Mouse
3. FLIUDSIM Software
PROCEDURE:
1. Fluid sim software icon is available is the desktop by double clicking the icon.
2. The software home page will open, click new for creating the blank page.
3. Side of the wizard tool is available by using tool use drown the circuit.
4. In the tool symbols, just trag the symbol to the sheet which are the element are necessary
such as (hydraulic –supply element actuator values) compressor, 3/2 mechanically
operated spring controlled direction controlled valve and single acting cylinder.
5. Then correct the ports according to the circuit.
6. Finally simulate by using the simulation tool.
RESULT:
Thus the simulation of the electro hydraulic circuit is simulated by using fliudsim software.
EX.NO: 06 SIMULATION OF ELECTRO PNEUMATIC CIRCUIT
DATE:
AIM:
To simulate the electro pneumatic circuit by using fliudsim software.
APPARATUS REQUIRED:
1. CPU and Monitor
2. Keyboard and Mouse
3. FLIUDSIM Software
PROCEDURE:
1. Fluid sim software icon is available is the desktop by double clicking the icon.
2. The software home page will open, click new for creating the blank page.
3. Side of the wizard tool is available by using tool use drown the circuit.
4. In the tool symbols, just trag the symbol to the sheet which are the element are necessary
such as (pneumatic –supply element actuator values) compressor, 3/2 mechanically
operated spring controlled direction controlled valve and single acting cylinder.
5. Then correct the ports according to the circuit.
6. Finally simulate by using the simulation tool.
RESULT:
Thus the simulation of the electro pneumatic circuit is simulated by using fliudsim software.
EX.NO: 07 SIMULATION OF ELECTRO PNEUMATIC CIRCUIT
DATE:
AIM:
To design a circuit to extend and retract the single acting cylinder with the help of delay
timer controlled by PLC.
APPARATUS REQUIRED:
1. Single acting cylinder
2. RS 232 cable
3. Versa pro software
4. 3/2 single solenoid valve
5. FRL unit
6. PLC
7. Connecting wires and tube
PROCEDURE:
ON DELAY TIMER:
1. Draw the circuit diagram
2. Provide +24V and –24V from PLC trainer to panel.
3. Open the versa pro software in desktop
4. Interface PLC with PC using RS 232 cable.
5. Write a ladder diagram.
6. Output of PLC (q1) is directly connected to input of solenoid coil.
7. Following the opening procedure of versa pro software.
8. Check the ladder diagram.
9. Connect the air supply to FRL unit.
10. Run the PLC. After some delay the cylinder will be activated.
CIRCUIT DIAGRAM: ON DELAY TIMER
PROCEDURE:
OFF DELAY TIMER
1. Draw the circuit diagram
2. Provide +24V and –24V from PLC trainer to panel.
3. Open the versa pro software in desktop
4. Interface PLC with PC using RS 232 cable.
5. Write a ladder diagram.
6. Output of PLC (q1) is directly connected to input of solenoid coil.
7. Following the opening procedure of versa pro software.
8. Check the ladder diagram.
9. Connect the air supply to FRL unit.
10. Run the PLC and observe the working of single acting cylinder.
CIRCUIT DIAGRAM-OFF DELAY TIMER
RESULT:
Thus the actuation of single acting cylinder with ON and OFF delay timer was done using PLC.
EX.NO: 08 SIMULATION OF ELECTRO PNEUMATIC CIRCUIT
DATE:
AIM:
To simulate the automatic sequence of double acting cylinder using PLC
APPARATUS REQUIRED
1. Double acting cylinder
2. RS 232 cable
3. Versa pro software
4. 5/2 double solenoid valve
5. FRL unit
6. PLC
7. Connecting wires and tube.
PROCEDURE:
1. Draw the circuit diagram
2. Provide +24V and –24V from PLC trainer to panel.
3. Open the versa pro software in desktop
4. Interface PLC with PC using RS 232 cable.
5. Write a ladder diagram.
6. Both outputs of PLC (q1 and q2) are directly connected to inputs of solenoid coils.
7. Following the opening procedure of versa pro software.
8. Check the ladder diagram and connect the air supply to FRL unit
10. Run the PLC and observe the working of double acting cylinder.
CIRCUIT DIAGRAM
RESULT:
Thus the ladder diagram for the automatic running of double acting cylinder is drawn and executed.
EX.NO: 09 SIMULATION OF ELECTRO PNEUMATIC CIRCUIT
DATE:
AIM:
To design a circuit for the sequence A+B+A-B using PLC.
APPARATUS REQUIRED:
1. Single and double acting cylinder
2. RS 232 cable
3. Versa pro software
4. 3/2 single solenoid valve, 5/2 double solenoid valve
5. FRL unit
6. PLC
7. Connecting wires and tube
PROCEDURE:
1. Draw the circuit diagram
2. Provide +24V and –24V from PLC trainer to panel.
3. Open the versa pro software in desktop
4. Interface PLC with PC using RS 232 cable.
5. Write a ladder diagram.
6. Outputs of PLC (q1, q2, q3 and q4) are directly connected to the inputs of solenoid coil.
7. Following the opening procedure of versa pro software.
8. Check the ladder diagram.
9. Connect the air supply to FRL unit.
10. Run the PLC and observe the working of double acting cylinder.
CIRCUIT DIAGRAM:
RESULT:
Thus the ladder diagram for the automatic running of double acting cylinders is designed and
executed.