van leusden catalogue 2008

Heavy Duty Lifting Equipment

Product Catalogue

Product Catalogue

Catalogue No. 120.10

4

Proudly we present to you our catalogue: Van Leusden Heavy Duty Lifting Equipment. During the last decades Van Leusden Heavy Duty products were

applied in a large number of sectors in the market. The products developed

into a well-known and reliable solution, especially in environments where

material quality and long lifetime is an important issue.

Van Leusden Heavy Duty Lifting Equipment is used mainly in three market

sectors where high quality and reliability is a primary demand. For these

markets we have selected our best products and present to you a catalogue

which is divided into three main market / application sections.

You will fi nd the following chapters:

Industry Heavy Duty

Maritime & Offshore

Explosion Protection Solutions

Our products comply with a great

number of rules and regulations in the

various markets as mentioned above.

All our products are produced and

assembled in our own factory. Our

design department is always working

on improvements and special projects

to fulfi l our customers special needs.

You can fi nd your way through our

documentation by following the logo

of your application / market. Should

any questions arise, you can always

contact your local agent or our sales

offi ce directly. We are happy and always

prepared to help you fi nding the best

solution.

Would you like to order directly? You can simply use the specifi ed article

number to place your order. A page

number and type designation is also

a simple way to order your desired

products.

We wish you every success in fi nding

the right solution.

Van Leusden B.V.

WWWWeeeellllcccome to Van LLLLeeussdddddeeeeennnnn BBBBB....VVVVV.....me toooooo Vannnnnnnnnnn LLLLLLLLLLeeeeeusssssdddddeeeennnnn BBBBBBBBBBBBBBBBBBBB VVVVVVVVVVVVVVVVVVVVVme to Van Leusden B Vee

Did you know that you can download our catalogue from our website?

Feel free to visit us at www.vanleusden.comwww.vanleusden.com and go to the download area.

5

Industry Heavy Duty 6

Maritime & Offshore 30

Explosion Protection Solutions 46

6

Industry Heavy Duty

The design is unique in it’s class

This paragraph presents our range of products for heavy duty applications in the indu-

stry sector.

Our Heavy Duty Industrial products have excellent properties for al kinds of extreme

conditions. The products are rigid, constructed for a long life time and low maintenance

costs. The design is unique in it’s class. A force stable design makes the equipment

able to operate under worse operating conditions.

To ensure high safety margins but also a low weight we use where necessary high

tensile materials.

Our range of trolleys and hoists contains:

• Basic trolleys, push and manual geared

• Articulated trolleys for extreme small curves

• Electric driven trolleys

• Swinging beam trolleys to construct your own simple crane

• Manual hoists, and hoist/trolley combinations

• Low headroom trolley/hoist combinations

• For transport of persons we have a separate range of trolleys, complying to EN 1808

Our trolleys and hoists have a high quality standard. The construction is solid, to enable

the trolley to operate for a long time, without any maintenance.

7

All equipment is designed according to the EC machinery directive and the designated European

standards with applicable declaration of conformity.

Should you have any special request which is not mentioned in this catalogue, please feel free to

contact us. We will help you fi nding your specifi c solution.

Galvanized construction parts and sealed

bearings make the trolley suitable for out-

door conditions with a long lifetime.

A generic design of wheels, making the

trolley suitable for different beamtypes,

is integrated in the standard trolley. The

trolley combines excellent with the hoists

as presented in this catalogue.

The products mentioned above can be

delivered with a wide range of options.

We refer to the special options page of

this chapter for detailed descriptions.

Apart from trolleys and hoists you will also

fi nd our standard range of hand driven

cranes and crane components.

All our cranes and crane-components are

de signed and manufactured at our own

factory.

Trolleys

Push & geared / Standard type 8

Push & geared / Articulated 9

Push / Swinging beam 10

Hoists Hand driven chain hoists 11

Hoist-Trolley units Hand driven / Standard 12

Hand driven / Low headroom 13

Hand driven / Ultra low headroom 14

Trolleys Transport of persons / EN1808 15

Electrical / Wormgeared motor 16

Electrical / Geared motor with brake 17

Electrical / Articulated 18

Electrical / Swinging beam 19

Hoist Electrical Chain hoist &

Combinations I 20

Electrical Chain hoist &

Combinations II 21

Cranes Hand operated / Swinging

beam cranes 22

Hand operated / Underslung crane 23

Hand operated / Overhead crane 24

Components Wheels / Single fl ange 25

Wheels / Double fl ange 26

Hand chain wheels / Pinions 27

Options Industry Heavy Duty 28

8

Features:

• Capacities 500-25.000 Kg

• Unique 3 bolts design, safety & stability

• Long life time, low operational costs

• Suspension of all types of hoists

• Suitable for all types of beams

• Electric galvanized chassis, suspension bolts and

wheels up to 64 KN model

• Models 84 KN and higher, standard surface

treatment, 2 layer Alkyd paint 80 μm, RAL7021

• Trolley wheels with life time lubricated bearings

• Wheel break supports and anti-tilt device integrated

Optional:

• Fixed beam execution

• Straight suspension bolt with spacers

• Extra suspension set for other beam range

• Rubber buffers on trolley

• Extended chain wheel drive, M=....mm (max. 300 mm)

• Special side plates to increase dimension “E”

• Stainless steel name plates

• Load test, with certifi cate

• Non corrosive treatments, special surface protection

for aggressive environments, outdoor applications,

offshore & marine environments. Reference to page

42 of this catalogue for detailed application

information

N L

R

C

AB

E HFG

W

O

D

M

Trolleys | Push & geared / Standard type

Technical information:

1) *Mass plain type

** Mass Geared type, excl. hand chain 1 mtr Lift = 1 Kg.

2) For curved beams always contact us or your local Agent

3) Max. INP profi le restriction for 6 KN = INP220,

11KN = INP300, 22KN = INP360, 33 KN = INP400,

52/64 KN = INP450.

min. beamwidth

max. beamwidth

bw = beamwidth

Trolleys / Push & Geared / Standard type (Art. group 81000-81200)

Capacity

Kg.

Hoist

Mass

Max.

Kg.

Chassis

Type

Adjustable

beam width

min~max

mm. 3)

R (min).

Radius

Beam 2)

mm.

Dimensions Chain

Pull

Max.

Kg.

Weight

Kg.

1)

*-**

Push

81000..

Art. Nr.

Push

Price €

Geared

81200..

Art. Nr.

Geared

excl.

Hand-

chain

Price €

Galvanized

Handchain

Control

length

Price / m €

Stainless

Handchain

Control

length

Price / m €

A B C L H W R D E F G M N O

500 100 6 KN55~102

1000 45 60 15 150 125160

75 52 15 45 30 - - - - 3..-00600 -/-

105~152 210 ..-00601 -/-

1.000 120 11 KN

55~102

1500 60 75 18 190 160

175

99 60 20 60 30 65 90 100 10 5-6

..-01100 ..-01100

105~152 225 ..-01101 ..-01101

156~203 275 ..-01102 ..-01102

207~254 325 ..-01103 ..-01103

2.000 250 22 KN

74~127

1600 80 100 22 255 205

215

123 75 27 80 35 65 90 100 16 11-12

..-02200 ..-02200

127~180 270 ..-02201 ..-02201

190~243 330 ..-02202 ..-02202

254~305 390 ..-02203 ..-02203

3.200 150 33 KN

90~143

2000 100 120 25 300 245

250

144 90 35 100 40 70 95 100 20 18-19

..-03300 ..-03300

149~203 310 ..-03301 ..-03301

203~254 360 ..-03302 ..-03302

251~305 410 ..-03303 ..-03303

5.000 300 52 KN

106~156

2900 125 150 30 375 305

270

174 117 40 120 60 100 130 135 20 31-32

..-05200 ..-05200

160~210 325 ..-05201 ..-05201

210~260 375 ..-05202 ..-05202

255~305 420 ..-05203 ..-05203

6.300 200 64 KN

106~156

2900 125 150 30 375 310

270

174 117 40 120 60 100 130 135 25 33-34

..-06400 ..-06400

160~210 325 ..-06401 ..-06401

210~260 375 ..-06402 ..-06402

255~305 420 ..-06403 ..-06403

8.000 550 84 KN fi xed (119 Min)

3500

160 190 35 450 365 bw+150 220 145 45 145 80 105 130 270 16 85-90 ..-08401 ..-08401

10.000 600 104 KN fi xed (131 Min) 160 190 35 450 370 bw+150 220 145 45 145 80 105 130 270 19 90-95 ..-10401 ..-10401

12.500 150 124 KN fi xed (143 Min) 160 190 35 450 370 bw+150 220 145 45 145 80 105 130 270 23 95-100 ..-12401 ..-12401

16.000 700 164 KN fi xed (155 Min)

5500

200 240 50 550 445 bw+185 272 165 42 165 100 135 170 300 20 135-145 ..-16401 ..-16401

20.000 800 204 KN fi xed (170 Min) 200 240 50 550 450 bw+185 272 165 42 165 100 135 170 300 25 140-150 ..-20401 ..-20401

25.000 900 254 KN fi xed (185 Min) 200 240 50 550 455 bw+195 272 165 42 165 100 135 170 380 25 150-160 ..-25401 ..-25401

9

E

T

B A

C

O

N

M

L

GD

R

Trolleys / Push & Geared / Articulated (Art. group 83300)

Capacity

Kg.

Hoist

Mass

Max.

Kg.

Chassis

Type

Beam width

fi xed

mm.

R (min).

Radius

Beam 2)

mm.

DimensionsChain

Pull

Max.

Kg.

Push

83300

Art. Nr.

Push

Price €

Geared

83300

Art. Nr.

Geared

excl.

Handchain

Price €

Galvanized

Handchain

Control

length

Price / m €

Stainless

Handchain

Control

length

Price / m €

A B C D E G L R M N O T

500 100 11 KN fi xed 400 60 75 18 148 18 59 455 300 70 95 100 63 10 ..-01101 ..-01111

1.000 120 11 KN fi xed 400 60 75 18 145 18 64 455 300 70 95 100 63 10 ..-01102 ..-01112

2.000 250 22 KN fi xed 450 80 100 22 152 20 73 525 350 73 98 135 66 16 ..-02201 ..-02211

3.200 150 33 KN fi xed 500 100 120 25 191 20 73 570 380 77 102 195 70 20 ..-03301 ..-03311

5.000 300 52 KN fi xed 600 125 150 30 197 26 100 625 400 79 109 195 72 20 ..-05201 ..-05211

6.300 200 64 KN fi xed 600 125 150 30 214 26 100 675 450 82 112 270 75 25 ..-06401 ..-06411

8.000 550 84 KN fi xed 800 160 190 35 208 33 130 705 450 87 107 300 80 16 ..-08401 ..-08411

10.000 600 104 KN fi xed 900 160 190 35 261 33 130 780 500 87 107 380 80 19 ..-10401 ..-10411

12.500 150 124 KN fi xed @ 160 190 35 @ @ @ @ @ @ @ @ @ 23 ..-12401 ..-12411

16.000 700 164 KN fi xed @ 200 240 50 @ @ @ @ @ @ @ @ @ 20 ..-16401 ..-16411

20.000 800 204 KN fi xed @ 200 240 50 @ @ @ @ @ @ @ @ @ 25 ..-20401 ..-20411

25.000 900 254 KN fi xed @ 200 240 50 @ @ @ @ @ @ @ @ @ 25 ..-25401 ..-25411

@ = on request


1) Max. INP profi le restriction for 11KN = INP300, 22KN =

INP360, 33 KN = INP400, 52/64 KN = INP450.

2) Extreme small beamwidth-combination with Radius,

please contact us or your local agent.

Trolleys | Push & geared / Articulated

Features:


• Developed for extreme small curved beams


• Excellent characteristics due to special slewing

points and guidance wheels

• Articulated trolley always designed for one specifi c

fi xed beam type

• Standard surface treatment, 2 layer Alkyd paint

80 μm, RAL 7021



Optional:

• Special constructional design to suit specifi c hoist type








information

10

Trolleys | Push / Swinging beam

Trolleys / Push / Swinging beam (Art. group 82000)

Max.

Trolley

Capacity

Kg.

Chassis

Type

Max.

Beamwidth

mm.

Suspension

GK…DO

DimensionsWeight

Kg.

Push

82000..

Art. Nr.

Trolley

Price

Each €

Mounting

Plate

Price

Each €

A B C E L R S T J N D Z

1.100 11 KN

120 20

60 75 18 20 190 99 3) 125

100

40 60 300 6

..-01110

240 25 105 ..-01120

305 30 110 ..-01130

2.250 22 KN

113 25

80 100 22 27 255 123 3) 150

120

50 75 380 12

..-02210

210 30 125 ..-02220

305 35 135 ..-02230

3.350 33 KN

131 30

100 120 25 35 300 144 3) 175

140

60 90 435 20

..-03310

220 35 150 ..-03320

305 40 160 ..-03330

5.300 52 KN

131 35

125 150 30 40 375 174 3) 200

180

65 117 575 32

..-05210

210 40 185 ..-05220

310 45 195 ..-05230

Features:

• Range from 1.100 Kg till 5.300 Kg Trolley capacity

• Smooth running across crane gantry by fl exible

suspension system

• Suspension of crane girder by ball joint

• Material ball joint S355, suitable for welding

• Fixed beam width for specifi ed crane gantry beam

• Electric galvanized chassis, and wheels. Suspension

set in Zinc primer + top coat

Optional:

• Mounting plate for bolt suspension to crane girder



• For suitable hoist and trolleys see our other

catalogue pages



offshore & marine environments. Reference to page 42

of this catalogue for detailed application informationJ

A B

C

N

TST L

R

E

D


Projecting the right Swinging beam trolley for your crane:

(example)

Safe working load crane : 1.000 Kg

Total weight hoist / trolley unit : 75 Kg

Total weight crane girder 250/2 = : 125 Kg +

Calculated trolley load : 1.200 Kg

---> See Table, trolley type 22 KN

1) For determination of the size of crane girders we refer

to page 64 of this catalogue.

2) Always state your crane girder type, for production of

the suitable mounting plate.

3) Maximum span (S) is 8 meters for all capacities.

4) For cranes with an outreach larger than T (see table)

contact us or your local supplier

5) Max. INP profi le restriction for 11KN = INP300,

22KN = INP360, 33 KN = INP400, 52/64 KN = INP450.

« mounting plate

11

Hoists | Hand driven chain hoists

Hoist / Hand chain driven hoists (Art. group 89102)

Capacity

Kg.

Head-

room

G

mm

Max.

Pull

Handchain

Kg.

No.

Off Falls

Chain

dimension

mm

Weight

3 mtrs.

Lift

Kg.

Dimensions Hoist

89102..

Art. Nr.

Basic

3 mtrs. Lift

Execution

Price €

Load

Chain

per m

Price €

Hand

Chain

per m

Price €

Loadchain

Stainless St.

per m

Price €

Handchain

Stainless St.

per m

Price €

Overload

Protection

Price €

Option Option

A B D E F F1

Protection

86810..

Art. Nr.

Non

Corrosive

ZincAl

Price €

Protection

86810..

Art. Nr.

Non

Corrosive

AISI

Price €

Reduced Capacity!!

500 260 21 1 5 8 82 56 90 48 30 24 ..-00500 ..-00575 ..-00585

1.000 300 24 1 6,3 10,5 83 63 100 59 36 29 ..-01000 ..-01075 ..-01085

1.600 345 29,5 1 7,1 15 90 75 115 69 39 31 ..-01600 ..-01675 ..-01685

2.000 380 33,5 1 7,9 21 98 85 132 82 42 34 ..-02000 ..-02075 ..-02085

3.200 435 38 1 10 30,5 106 92 160 94 48 39 ..-03000 ..-03075 ..-03085

5.000 575 36 3 7,1 35 90 75 188 94 56 47 ..-05000 ..-05075 ..-05085

10.000 790 43 3 10 76 106 92 283 122 75 68 ..-10000 ..-10075 ..-10085

16.000 1020 47 5 10 155 106 92 340 205 90 81 ..-16000 ..-16075 ..-16085

20.000 1040 45x2 6 10 250 153 153 390 390 90 81 ..-20000 ..-20075 ..-20085

25.000 1100 44x2 8 10 320 185 185 390 390 90 81 ..-25000 ..-25075 ..-25085

32.000 1470 47x2 10 10 440 215 215 400 400 110 95 ..-32000 ..-32075 ..-32085

@ = on request

F

F1

GLI

FT

B A E D

G

F

F1

GLI

FT

B A E D

G

LIF

T

F1

F

G

AB DE

G

F1F

GLI

FT

A B D E

G

Technical information

Stainless steel load chain results in a reduced capacity for

the hoist. The following capacities shall be observed :

S.W.L. No. of Chain diam. Reduced Capacity

ton falls mm ton

0.5 1 5 0.5

1 1 6.3 1

1.6 1 7.1 1.25

2 1 7.9 1.25

3 1 10 2

5 3 7.1 3.75

10 3 10 6

16 5 10 10

20 6 10 12

25 8 10 16

32 10 10 20

Features:

• Capacities 500-32.000 Kg. in standard execution

• Super modern, excellent combination with standard

HD3C trolleys

• Compact & Low weight

• Low headroom

• Low pulling effort on the handchain

• 2 independent brake pawls to enhance safety &

protection

• Automatic load brake

• Heavy duty reduction gear & load sheaves

• High safety factor

Optional:

• Integration directly into standard trolley possible to

get the lowest headroom possible, see page 12

• Low and ultra low headroom types available,

see page 13 & 14.

• Overload protection


• Stainless Steel load chain, available on request

(reduced capacity)

• Non corrosive execution, with special protection by

fl ame spraying, in ZincAl or special paint system.

See page 42 for more information

500 Kg - 3.200 Kg

5.000 Kg - 10.000 Kg

16.000 Kg 20.000 Kg - 32.000 Kg

12

Hoist-Trolley units | Hand driven / Standard

Hoist-Trolley units / Hand driven / Standard type (Art. group 81250-81255)

Capacity

Kg.

Headroom

G

mm.

No.

off

Fals

Trolley

Chassis

Type

Adjustable

beam width

min~max

mm.

R(min).

Radius

Beam

mm.

Dimensions

Weight

Kg.

3 mtr

Hoist / trolley

Push (3 mtrs)

81250..

Hoist / trolley

Geared (3 mtrs)

81255..

Hoist

Loadchain

lifting height

Price / m €

Hoist & trolley

Handchain

control height

Price / m €

Overload

Protection

Price €

A B C E F F1 R L N O n

Art. Nr. Price € Art. Nr. Price €

500 315 1 6 KN55~102

1000 45 60 15 15 30 24 75 150 - - - 11..-00600 -

105~152 ..-00601 -

1.000 360 1 11 KN

55~102

1500 60 75 18 20 36 29 99 190 90 100 2.5m 20

..-01100 ..-01100

105~152 ..-01101 ..-01101

156~203 ..-01102 ..-01102

207~254 ..-01103 ..-01103

1.600 420 1 22 KN

74~127

1600 80 100 22 27 39 31 123 255 90 100 2.5m 30

..-01600 ..-01600

127~180 ..-01601 ..-01601

190~243 ..-01602 ..-01602

254~305 ..-01603 ..-01603

2.000 455 1 22 KN

74~127

1600 80 100 22 27 42 34 123 255 90 100 2.5m 36

..-02200 ..-02200

127~180 ..-02201 ..-02201

190~243 ..-02202 ..-02202

254~305 ..-02203 ..-02203

3.200 525 1 33 KN

90~143

2000 100 120 25 35 48 39 144 300 95 100 2.5m 53

..-03300 ..-03300

149~203 ..-03301 ..-03301

203~254 ..-03302 ..-03302

251~305 ..-03303 ..-03303

5.000 690 3 52 KN

106~156

2900 125 150 30 40 56 47 174 375 130 135 2.5m 70

..-05200 ..-05200

160~210 ..-05201 ..-05201

210~260 ..-05202 ..-05202

255~305 ..-05203 ..-05203

10.000 935 3 104 KN fi xed (131 Min) 3500 160 190 35 45 75 68 220 450 130 270 2.5m 175 ..-10401 ..-10401

16.000 1185 5 164 KN fi xed (155 Min)

5500

200 240 50 42 90 81 272 560 170 300 2.5m 305 ..-16401 ..-16401

20.000 1205 6 204 KN fi xed (170 Min) 200 240 50 42 90 81 272 560 170 300 2.5m 415 ..-20401 ..-20401

25.000 1265 8 254 KN fi xed (185 Min) 200 240 50 42 90 81 272 570 170 380 2.5m 495 ..-25401 ..-25401

Features:

• Capacities 500-25.000 Kg in standard headroom

execution

• Advantages and high quality combined in one

combo pack unit

• Low in weight, compact headroom

• Low pulling force on the hand chain

• Standard adjustable fl ange width in different ranges

• Electric galvanized trolley chassis, suspension bolts

and wheels up to 64 KN model

• Hoist unit powder coating, orange colour RAL2008

• Trolley model 104 KN and higher, standard surface

treatment, 2 layer Alkyd paint 80 μm, RAL 7021




Optional:

• Stainless steel name plate

• Rubber buffers




(reduced capacity)




of this catalogue for detailed application information

F1

F

N

LIF

TG

E

B A O

R

L

n

C


For detailed technical information about hoist and trolley

please refer to the individual pages for these products.

--->For trolleys : Page 8

--->For manual hoist :




52/64 KN = INP450.

13

Hoist-Trolley units / Hand driven / Low headroom (Art. group 81300-81400)

Capacity

Kg.

Headroom

G

mm.

No.

off

Fals

Trolley

Chassis

Type

Fixed for

beam width

in range

mm.

DimensionsWeight

Kg.

3 mtr

Hoist / trolley

Push (3 mtrs)

81300

Hoist / trolley

Geared (3 mtrs)

81400

Hoist

Loadchain

lifting height

Price / m €

Hoist & trolley

Handchain

control height

Price / m €

Overload

Protection

Price €

A B C E F F1 R T L M N O n


500 210 1 6 KN 55-300 45 60 15 15 30 24 75 33 248 - - - - 12 ..-00600 -

1.000 245 1 11 KN 55-300 60 75 18 20 36 29 99 42 310 65 90 100 2.5m 22 ..-01100 ..-01100

2.000 315 1 22 KN 74-300 80 100 22 27 42 34 123 49 395 65 90 100 2.5m 40 ..-02200 ..-02200

3.200 370 1 33 KN 90-300 100 120 25 35 48 39 144 59 455 70 95 100 2.5m 60 ..-03300 ..-03300

5.000 475 3 52 KN 106-300 125 150 30 40 56 47 174 65 590 100 130 135 2.5m 75 ..-05200 ..-05200

Remark: These units will be manufactured on a fi xed beamwith in the range as specifi ed in the table.

Hoist-Trolley units | Hand driven / Low headroom

OB A

E

N

LIF

TG

C

F1

F

M

T

n

R

L Technical information:




52/64 KN = INP450.

Features:

• Capacities 500-5.000 Kg in low headroom execution

• Suitable for narrow spaces and low headroom applications

• Low in weight, compact design


• The hoist has double safety pawl, safe and sure brakes

• Trolley manufactured for fi xed beamwidth in

different ranges

• Trolley standard surface treatment, 2 layer Alkyd

paint 80 μm, orange colour RAL2008




Optional:





(reduced capacity)





information

14

Hoist-Trolley units | Hand driven / Ultra low headroom

Hoist-Trolley units / Hand driven / Ultra low headroom (Art. group 81650)

Capacity

Kg.

Headroom

G

mm.

No.

off

Fals

Trolley

Chassis

Type

Fixed

beam width

in range

mm

Dimensions Weight

Kg.

3 mtr

Hoist / trolley

geared (3 mtrs)

81650

Hoist

Loadchain

lifting height

Price / m €

Hoist / trolley

Handchain

Control height

Price / m €

Overload

Protection

Price €

A B C E F F1 R L N U O n

Art. Nr. Price €

1.000 125 2 22 KN 74-300 80 100 22 20 36 29 226 465 140 105 100 2.5m 40 ..-01100

2.000 150 2 33 KN 90-300 100 120 25 20 42 34 266 550 145 150 135 2.5m 120 ..-02200

3.200 170 2 52 KN 106-300 125 150 30 26 48 39 310 635 175 150 135 2.5m 150 ..-03300

6.000 285 2 84 KN 119-300 160 190 35 33 75 68 430 900 225 200 300 2.5m 300 ..-06400


Features:

• Suitable for extreme narrow spaces and extreme

Low headroom applications

• Capacities 1.000-6.300 Kg in Ultra low headroom

execution

• Low in weight, ultralow headroom


• The hoist has double safety pawl, safe and sure

brakes

• Complete unit with standard surface treatment,

2 layer Alkyd paint 80 μm, orange colour RAL2008

Optional:

• Capacity > 6 ton





(reduced capacity)





information

E

U Nn

F1

F

O

GLI

FT

R

L

AB

C


1) Capacity up till 25 ton possible.


33 KN = INP400, 52/64 KN = INP450.

15

W

T

S

E

D

C

AB

N

M

O

H

R

L

GF

Trolleys | Transport of persons / EN1808

Trolleys / Transport of persons / EN1808 (Art. group 81700-82700)

Capacity

Kg.

Hoist

Mass.

Max.

Kg.

Chassis

Type

Beam Width

Fixed

“bw”

mm.

R(min).

Radius

Beam

mm.

Dimensions

A B C L H W R D E F G N M O T N1 2) N2 U

320 120 11 KN fi xed 1500 60 75 18 190 150 bw+70 99 60 20 60 30 90 65 100 40 - - -

630 250 22 KN fi xed 1600 80 100 22 255 195 bw+85 123 75 27 80 35 90 65 100 50 320 150 235

1.000 150 33 KN fi xed 2000 100 120 25 300 235 bw+105 144 90 35 100 40 95 70 100 55 325 175 245

1.600 300 52 KN fi xed 2900 125 150 30 375 295 bw+120 174 117 40 120 60 130 100 135 65 345 190 275

2.000 200 64 KN fi xed 2900 125 150 30 375 300 bw+120 174 117 40 120 60 130 100 135 65 345 210 275

2.500 550 84 KN fi xed 3500 160 190 35 450 365 bw+150 220 145 45 145 80 135 115 270 80 370 210 285

3.200 600 104 KN fi xed 3500 160 190 35 450 370 bw+150 220 145 45 145 80 135 115 270 80 420 210 285

4.000 150 124 KN fi xed 3500 160 190 35 450 375 bw+150 220 145 45 145 80 135 115 270 80 420 210 285

For a suitable technical and commercial proposal, please contact us or your local agent.

S

N1

S

N2 ½L U Technical information:


2) N1 for Single speed motor 1V


22KN = INP360, 33 KN = INP400, 52/64 KN = INP450.

Features:


• Capacity including persons and materials

• According to EN 1808 every trolley load tested and

stamped

• Trolleys for transport of persons are always designed

for fi xed beam

• Electric galvanized chassis and wheels up to 64 kN

model. Suspension bolts with zinc primer





Optional:

• Triangular suspension safety plate with lugs for

hoisting line and safety line




• Electric trolleys:

• Switch box with 2 relays for trolley drive

• Necessary counterweight if applicable

• Limit switches, mounted on trolley, excl. cabling





bw = beamwidth

16

Trolleys | Electrical / Wormgeared motor

Trolleys / Electrical / Wormgeared motor (Art. group 82400)

Capacity

Kg.

Hoist

Mass

Max.

Kg.

Chassis

Type

Adjustable

beam width

min~max

mm.

R(min).

Radius

Beam

mm 2)

Dimensions Weight

Kg.

Speed

m/min

Trolley

82400..

Art. Nr.

Trolley +

Motor

Price €

Relay

Box*

1V

Price €

Limit

Switches

Price €A B C L H W R D E F G N2 U P

1.000 250 22 KN

74~127

1600 80 100 22 365 200

215

123 75 27 80 35 150 235 105 16 10

..-01210

127~180 270 ..-01211

190~243 330 ..-01212

254~305 390 ..-01213

2.000 250 22 KN

74~127

1600 80 100 22 365 200

215

123 75 27 80 35 150 235 105 16 10

..-02210

127~180 270 ..-02211

190~243 330 ..-02212

254~305 390 ..-02213

3.200 150 33 KN

90~143

2000 100 120 25 385 245

250

144 90 35 100 40 171 245 115 23 10

..-03310

149~203 310 ..-03311

203~254 360 ..-03312

251~305 410 ..-03313

5.000 300 52 KN

106~156

2900 125 150 30 435 290

270

174 117 40 120 60 187 275 130 39 10

..-05210

160~210 325 ..-05211

210~260 375 ..-05212

255~305 420 ..-05213

6.300 200 64 KN

106~156

2900 125 150 30 435 295

270

174 117 40 120 60 190 275 130 41 10

..-06410

160~210 325 ...-06411

210~260 375 ..-06412

255~305 420 ..-06413

* Relay Box : Terminal box with relay switching set, excl. transformer, excl. terminals, mounted on the trolley. Cable from motor to relaybox included.

Pendant control switch and control cable excluded.

Control voltage 24V or 48V.

Features:

• Capacities 500 up to 6.300 Kg

• Self braking worm geared motor, no separate

electromagnetic brake

• Combine with all types electrical chain hoists

• Trolley with motor/gearbox, without contactor

controls and control box

• Single speed design smooth acceleration and stopping

• Motor IP54, ISO F, 400/230V - 3 Ph - 50Hz, standard

manufacturers’ surface treatment



Optional:


• Switch box with relays for trolley drive for integration

with hoist*

• Integration with electric chain hoist unit


• Straight suspension bolt with spacers or bushings








C N2

P

E

W

AB

D

L

H

U

G

R

F


1) Excl. additional counterweight (if applicable)


- Trolleys suitable for curved beams are executed

with a guide roller set.

- Details to be provided with order.

3) These trolleys are not suitable for manufacturing of

cranes or twin driven trolleys.


33 KN = INP400, 52/64 KN = INP450.

17

Trolleys / Electrical / Geared motor with brake (Art. group 82500)

Capacity

Kg.

Hoist

Mass

Max.

Kg.

Chassis

Type

Adjustable

beam width

min~max

mm.

R(min).

Radius

Beam

mm 2)

Dimensions Weight

Kg.

Speed

1V

m/min

Trolley

82500..

1V

Art. Nr.

Trolley +

Motor

Price €

Relay

box*

1V

Price €

Speed

2V

m/min

Trolley

82500..

2V

Art. Nr.

Trolley +

Motor

Price €

Relay

box*

2V

Price €

Limit

switches

Price €A B C L H W R D E F G N1 3)

1.000 250 22 KN

74~127

1600 80 100 22 255 190

215

123 75 27 80 35 320 17 10

..-01210

5/20

..-01220

127~180 270 ..-01211 ..-01221

190~243 330 ..-01212 ..-01222

254~305 390 ..-01213 ..-01223

2.000 250 22 KN

74~127

1600 80 100 22 255 190

215

123 75 27 80 35 320 17 10

..-02210

5/20

..-02220

127~180 270 ..-02211 ..-02221

190~243 330 ..-02212 ..-02222

254~305 390 ..-02213 ..-02223

3.200 150 33 KN

90~143

2000 100 120 25 300 230

250

144 90 35 100 40 325 27 10

..-03310

5/20

..-03320

149~203 310 ..-03311 ..-03321

203~254 360 ..-03312 ..-03322

251~305 410 ..-03313 ..-03323

5.000 300 52 KN

106~156

2900 125 150 30 375 290

270

174 117 40 120 60 345 45 10

..-05210

5/20

..-05220

160~210 325 ..-05211 ..-05221

210~260 375 ..-05212 ..-05222

255~305 420 ..-05213 ..-05223

6.300 200 64 KN

106~156

2900 125 150 30 375 295

270

174 117 40 120 60 345 50 10

..-06410

5/20

..-06420

160~210 325 ...-06411 ...-06421

210~260 375 ..-06412 ..-06422

255~305 420 ..-06413 ..-06423

8.000 550 84 KN fi xed (119 Min) 3500 160 190 35 450 360 bw+150 220 145 45 145 80 370 105 10 ..-08411 5/20 ..-08421

10.000 600 104 KN fi xed (131 Min) 3500 160 190 35 450 365 bw+150 220 145 45 145 80 420 115 10 ..-10411 5/20 ..-10421




Trolleys | Electrical / Geared motor with brake




- Trolleys suitable for curved beams are executed with

a guide roller set.


3) Dimensions for Single speed motor (1V)


33 KN = INP400, 52/64 KN = INP450.

B

N1

A

C

E

W

D

L

HFG

Rbw = beamwidth

Features:

• Capacities 1.000 up to 10.000 Kg

• Helical geared motor with electromagnetic brake

• Trolley with motor and gearbox, without contactor


• Single speeds design app. 10 m/min. in double speed

5 and 20 m/min







Optional:


• Relay box for trolley drive*


• Necessary counterweight if applicable










18

Trolleys | Electrical / Articulated

Features:


• Developed for extreme small curved beams


• Delivered with motor and gearbox, without contactor



5 and 20 m/min



• Articulated trolley always designed for one specifi c

beam type (non-adjustable)

• Trolley with standard surface treatment, 2 layer

Alkyd paint 80 μm, RAL7021

Optional:


• Relay box for trolley drive*


• Special constructional design to suit specifi c hoist type







information

T

E

B A

C

W

N

L

GD

R



2) Extreme small beamwidth-combination with Radius,

please contact us or your local agent.


33 KN = INP400, 52/64 KN = INP450.

Trolleys / Electrical / Articulated (Art. group 83300)

Capacity

Kg.

Hoist

Mass

Max.

Kg.

Chassis

Type

beam

width

fi xed

mm.

R(min).

Radius

Beam 2)

mm.

Dimensions Wormgeared

Trolley + motor

83300

Motor + brake

Trolley + motor

1V = 10 m/min

83300

Relay

box*

1V

Motor + brake

Trolley + motor

2V = 5/20 m/min

83300

Relay

box*

2V

Limit

switches

A B C D E G L R T N W

Speed m/min Art. Nr. Price € Art. Nr. Price € Price € Art. Nr. Price € Price € Price €

1.000 250 22 KN fi xed 450 80 100 22 145 20 73 525 350 70 200 bw+270 10 ..-01210 - -

2.000 250 22 KN fi xed 450 80 100 22 152 20 73 525 350 70 200 bw+270 10 ..-01211 - -

3.200 150 33 KN fi xed 500 100 120 25 191 20 73 570 380 70 220 bw+290 10 ..-03310 ..-03315 ..-03321

5.000 300 52 KN fi xed 600 125 150 30 197 26 100 625 400 75 220 bw+295 8 ..-05210 ..-05215 ..-05221

6.300 200 64 KN fi xed 600 125 150 30 214 26 100 675 450 75 220 bw+295 - - ..-06415 ..-06421

8.000 550 84 KN fi xed 800 160 190 35 208 33 130 705 450 80 240 bw+320 - - ..-08415 ..-08421

10.000 600 104 KN fi xed 900 160 190 35 261 33 130 780 500 80 250 bw+330 - - ..-10415 ..-10421




bw = beamwidth

19

Trolleys | Electrical / Swinging beam

Trolleys / Electrical / Swinging Beam (Art. group 83100)

Max.

Trolley

Capacity

Kg.

Chassis

Type

Max.

Beam

width

mm.

Suspension

GK...DODimensions Weight

Kg.

Speed

1V

m/min

Trolley

83100

1V

Art. Nr.

Price €

each

Trolley +

Motor

Relay

box*

1V

Price €

Speed

2V

m/min

Trolley

83100

2V

Art. Nr.

Price €

each

Trolley +

Motor

Relay

box*

2V

Price €

Limit

switches

Price €

Mounting

plate

option 2)

Price €A B C L R E S T J N1 N D

2.250 22 KN

113 25

80 100 22 255 123 27 3) 150

120

320 50 75 25 10

..02211

5/20

..02221

210 30 125 ..02212 ..02222

305 35 135 ..02213 ..02223

3.350 33 KN

131 30

100 120 25 300 144 35 3) 175

140

325 60 90 33 10

..-03311

5/20

..-03321

220 35 150 ..-03312 ..-03322

305 40 160 ..-03313 ..-03323

5.300 52 KN

131 35

125 150 30 375 174 40 3) 200

180

345 65 117 50 10

..-05211

5/20

..-05221

210 40 185 ..-05212 ..-05222

310 45 195 ..-05213 ..-05223

6.500 64 KN

106 35

125 150 30 375 174 40 3) 200

180

345 65 117 55 10

..-06411

5/20

..-06421

160 40 185 ..-06412 ..-06422

240 45 195 ..-06413 ..-06423

310 50 205 ..-06414 ..-06424





Projecting the right Swinging beam trolley for your crane:

(example)

Safe Working load crane: 1000

Total weight hoist / trolley unit: 75

Total weight crane girder 250/2=: 125 +

Calculated trolley load 1200

---> See Table, trolley type 22 KN

1) For determination of the size of crane girders we refer

to page 64 of this catalogue.

2) Always state your crane girder type, for production of

the suitable mounting plate.





33 KN = INP400, 52/64 KN = INP450.

Features:

• Trolley range from 1.100 till 6.500 Kg loading capacity

• Driven by a helical geared motor with electromagnetic

brake

• Smooth running across crane gantry by fl exible

suspension system

• Suspension of crane girder by ball joint

• Material ball joint S355, suitable for welding

• Fixed beam width for specifi ed beam

• Electric galvanized chassis, and wheels

Suspension set with zinc primer + top coat

• Wheel break supports, and anti-tilt device integrated




5 and 20 m/min



Optional:

• Mounting plate for bolt suspension to crane girder



• For suitable hoist and trolleys see our other pages

• Switch box with 2 relays for crane drive*



CN1N1

N

B A

E

TS

T

L

R

J

D

20

Hoist | Electrical Chain hoist & Combinations I

Features:

• Capacities 500 - 1.000 - 2.000 Kg

• Available as Stationary hoist as well as complete

hoist/trolley unit combined with HD3C Trolley

• Optimized solution, high quality standards combined

in one combopack

• Compact design, very low in weight

• Silent design by gearboxes with helical geared

wheels, smooth and silent chain guiding

• Including chain container

• Integrated slipping clutch, against overload

• Push Trolleys and Geared trolleys adjustable in range

as presented in the table

• Electric Trolleys with double speed motor 5/20

m/min, excl. travel limit switches

• Motors IP55, ISO F, 400 V, 3 Ph 50 Hz

• Control voltage 48 V- with control push button

pendant, suspended from hoist

• Temperature class -10°C….+40°C

Optional:

• Alternative supply voltage

• Power supply to unit by cabling on Festoon system

• Power supply to unit by multi conductor system

• Terminal box for connection to power supply point

• Main switch at the end of power supply line

B3

F1

G

F

H

B

B4

B1

B2

F1

LIF

TG

R

L

C

BA

N

M

F1

LIF

TG

L

R C

B A

MN

Hoist / Electric driven chain hoists & combinations type I (Art. group 89101)

Hoist Hoist + Trolley Hoist + Electric Trolley

Capacity

Kg.

No.

Of

Falls

Lifting

Speed

m/min

FEM

9,511

ISO 4301

Lifting

Height

Standard

Art. No.

89101..

DimensionsTrolley

Type

Beamwidth

min~max

mm

DimensionsTrolley

Type

Beamwidth

min~max

mm

Dimensions

Stationary hoistG A B C N M R L G A B C N M R L

B B1 B2 B3 B4 G F F1 H

500 2/1 4,0 / 1,0 1Am 3 mtrs ..05001 280 327 165 183 140 463 36 26 415 11 KN

55~102

523 60 75 18 165 162 99 190 22 KN

74~127

538 80 100 22 320 162 123 255105~152 127~180

156~203 190~243

207~254 254~305

1.000 2/1 4,0 / 1,0 1Am 3 mtrs ..10001 280 327 165 208 140 463 36 32 415 11 KN

55~102

523 60 75 18 165 162 99 190 22 KN

74~127

538 80 100 22 320 162 123 255105~152 127~180

156~203 190~243

207~254 254~305

2.000 2/1 5,0 / 1,25 1Am 3 mtrs ..20001 310 375 196 271 166 570 52 38 512 22 KN

74~127

645 80 100 22 196 179 123 255 22 KN

74~127

645 80 100 22 320 179 123 255127~180 127~180

190~243 190~243

254~305 254~305

Hoist Hoist Prices € Hoist + Trolley prices € Hoist + Trolley prices €

Capacity

Kg.

No.

Of

Falls

Lifting

Speed

m/min

FEM

9,511

ISO 4301

Lifting

Height

Standard

Art. No.

89101..

Basic

Hoist

Top

Hook

6 mtrs

Lift

Limit switch

Hoisting

Trolley

Type

Beamwidth

min~max

mm

Basic

Unit

Push

Basic

Unit

Geared

6 mtrs

Lift

Towing

arm

power

Trolley

Type

Beamwidth

min~max

mm

Basic

Unit

Electric

6 mtrs

Lift

Travel Limit

Switches

Towing

arm

power

500 2/1 4,0 / 1,0 1Am 3 mtrs ..05001 11 KN

55~102

22 KN

74~127

105~152 127~180

156~203 190~243

207~254 254~305

1.000 2/1 4,0 / 1,0 1Am 3 mtrs ..10001 11 KN

55~102

22 KN

74~127

105~152 127~180

156~203 190~243

207~254 254~305

2.000 2/1 5,0 / 1,25 1Am 3 mtrs ..20001 22 KN

74~127

22 KN

74~127

127~180 127~180

190~243 190~243

254~305 254~305

Stationary Hoist Hoist + Trolley Hoist + Electric Trolley

21

Hoist | Electrical Chain hoist & Combinations II

F1

F

B3

HG

B

B4

B1

B2LI

FT

F1

GR

L

BA

C

N M

LIF

T

F1

G

R

L

C

AB

N M

Hoist / Electric driven chain hoists & combinations type II (Art. group 89101)

Hoist Hoist + Trolley Hoist + Electric Trolley

Capacity

Kg.

No.

Of

Falls

Lifting

Speed

m/min

FEM

9,511

ISO 4301

Lifting

Height

Standard

Art. No.

89101..

DimensionsTrolley

Type

Beamwidth

min~max

mm

DimensionsTrolley

Type

Beamwidth

min~max

mm

Dimensions

Stationary hoistG A B C N M R L G A B C N M R L

B B1 B2 B3 B4 G F F1 H

3.200 2/1 4,0 / 1,0 1Bm 3 mtrs ..32001 304 496 315 240 158 517 36 33 699 33 KN

90~143

607 100 120 25 315 181 144 300 33 KN

90~143

607 100 120 25 325 181 144 300149~203 149~203

203~254 203~254

251~305 251~305

5.000 2/1 4,0 / 1,0 1Am 3 mtrs ..50001 349 522 316 312 154 643 41 41 711 52 KN

106~156

760 125 150 30 316 206 174 375 52 KN

106~156

760 125 150 30 345 206 174 375160~210 160~210

210~260 210~260

255~305 255~305

6.300 2/1 3,2 / 0,75 1Bm 3 mtrs ..63001 349 522 316 312 154 643 41 41 711 64 KN

106~156

760 125 150 30 316 206 174 375 64 KN

106~156

760 125 150 30 345 206 174 375160~210 160~210

210~260 210~260

255~305 255~305

Hoist Hoist Prices € Hoist + Trolley prices € Hoist + Electric trolley prices €

Capacity

Kg.

No.

Of

Falls

Lifting

Speed

m/min

FEM

9,511

ISO 4301

Lifting

Height

Standard

Art. No.

89101..

Basic

Hoist

Top

Hook

6 mtrs

Lift

Limit switch

Hoisting

Trolley

Type

Beamwidth

min~max

mm

Basic

Unit

Push

Basic

Unit

Geared

6 mtrs

Lift

Towing

arm

power

Trolley

Type

Beamwidth

min~max

mm

Basic

Unit

Electric

6 mtrs

Lift

Travel Limit

Switches

Towing

arm

power

3.200 2/1 4,0 / 1,0 1Bm 3 mtrs ..32001 33 KN

90~143

33 KN

90~143

149~203 149~203

203~254 203~254

251~305 251~305

5.000 2/1 4,0 / 1,0 1Am 3 mtrs ..50001 52 KN

106~156

52 KN

106~156

160~210 160~210

210~260 210~260

255~305 255~305

6.300 2/13,2 /

0,751Bm 3 mtrs ..63001 64 KN

106~156

64 KN

106~156

160~210 160~210

210~260 210~260

255~305 255~305

Features:

• Capacities 3.200 - 5.000 - 6.300 Kg

• Available as Stationary hoist as well as complete

hoist/trolley unit combined with HD3C Trolley


in one combopack






• Electric Trolleys with double speed motor 5/20 m/

min, excl. travel limit switches

• Motors IP55, ISO F, 400 V, 3 Ph 50 Hz

• Control voltage 48 V, with control push button


• Temperature class -20°C….+40°C

Optional:






• IP56/66 protection for motors

• Special paint system for maritime application

• Stainless steel load chain (reduced capacity)

Stationary Hoist Hoist + Trolley Hoist + Electric Trolley

22

Cranes | Hand operated / Swinging beam cranes

Features:

• Capacities 500 Kg - 3.200 Kg

• Smooth running across crane gantry by its fl exible

suspension system

• Suspension of crane girder by ball joint, which is

welded to the crane girder


and wheels


• Crane girder Surface protection Shot blasting +

primer + top coat in RAL1007

• S.W.L. Sticker

Optional:

• As loose kit components, to be assembled, trolleys

delivered with mounting plates

• If welding is not possible, crane girder can be bolted

to trolleys

• Rubber buffers on trolleys

• Special surface treatment

• For suitable hoist and trolleys see our other catalogue

pages





A B

C

N

TST L

R

E


1) Pre-selected crane girder for max. span width.

(Defl ection 1/750 of S)




4) Crane gantry size to be specifi ed with order

Cranes / Hand operated / Swinging beam cranes (Art. group 86000)

Crane

Capacity

Kg

Span

S

2)

mm

T

3)

mm

Hoist Trolley

mass

Kg.

Trolley

type

Crane

Girder

1)

Dimensions Mass.

Excl.

Hoist/trolley

Kg

Crane

Gantry

Beam Size 4)

Crane

86000

Art. Nr.

Crane

Price €A B C E L R N

500

3.400

125 100 11KN

IPE140

60 75 18 20 190 99 40

60

@

..011001

4.400 IPE160 90 ..011002

5.600 IPE180 130 ..011003

6.700 IPE200 170 ..011004

7.700 IPE220 230 ..011005

8.000 IPE240 270 ..011006

1.000

3.300

150 120 22KN

IPE180

80 100 22 27 255 123 50

100

@

..022001

4.900 IPE200 140 ..022002

5.900 IPE220 190 ..022003

6.900 IPE240 250 ..022004

8.000 IPE270 330 ..022005

2.000

3.100

175 250 33KN

IPE240

100 120 25 35 300 144 60

150

@

..033001

4.500 IPE270 220 ..033002

6.300 IPE300 320 ..033003

8.000 IPE330 450 ..033004

3.200

4.800

200 150 52KN

HEB220

125 150 30 40 375 174 65

430

@

..052001

6.000 HEB240 590 ..052002

8.000 HEB260 850 ..052003

@ = on request

23

Cranes | Hand operated / Underslung crane

Features:

• Van Leusden underslung cranes are available as

complete cranes and as crane kits for self-construction

• Solid steel single fl ange wheels, suitable for all kinds

of crane gantries

• Low pull force on the chain makes the crane easy to

drive

• The cranes are of low maintenance type en have

limited wear and tear parts

• The cranes delivered complete with: Manual geared

drive, Control height 3 m, control chain, Surface

protection Shot blasting + primer + top coat in

RAL1007, S.W.L. Sticker, Users manual

• Crane kits for crane-constructors: A complete set of

wheel boxes, with transversal shaft, bearing blocks,

hand chain wheel, hand chain, accompanied by a

dimensional sketch. Shot blasted + primer, Basic

welding execution, Crane girder to be welded to the

wheelboxes, Crane girder to be provided by

crane-constructor

Optional:

• Wheel boxes with screw fi ttings to the crane girder.

• Higher capacities, double girder cranes, low

headroom types


• For suitable Hoist and Trolley units see our other

catalogue pages

Detail: Y

Detail: X

Y

X

S+500

M

S

H

BA

2

LR

B+4mm


1) Max. Girder defl ection 1/600 of span.

Mentioned values are for complete

manual driven cranes.

2) Values mentioned between (....) are

corresponding a girder defl ection of

1/750 of span. This value shall be

used for cranes with electric driven

hoist and trolley or crane travel

motions.

3) Maximum INP Gantry for: ø 80/100S

= INP 360, ø 125/150S = INP 450

Cranes / Hand operated / Underslung crane (Art. group 86000)

S.W.L.

Kg.

S

m 1) 2)

R

mm

L

mm

Wheels

mm

A2

mm

Max. Weight.

Hoist+Trolley

Kg

Max.

Wheelbox load

KN

Handchain

Force

Kg

Crane

86200..

Art. Nr.

Price Crane

Excl. €

Hoist/Trolley

Crane Kit

86250..

Art. Nr.

Price Crane kit

€

Screw Fittings

Boltset incl.

€

500

- 4.10 (- 3.70) 800 1005 80/100S 150

100

7.0 10 ..05001 ..-05001

- 5.25 (- 4.75) 800 1005 80/100S 170 7.6 10 ..05002 ..05002

- 6.75 (- 6.00) 800 1005 80/100S 190 7.7 10 ..05003 ..05003

- 8.25 (- 7.40) 1000 1205 80/100S 210 8.1 11 ..05004 ..05004

1.000

- 3.95 (- 3.55) 800 1005 80/100S 170

105

12.3 15 ..10001 ..10001

- 5.00 (- 4.50) 800 1005 80/100S 190 12.4 15 ..10002 ..10002

- 6.00 (- 5.50) 800 1005 80/100S 210 12.5 15 ..10003 ..10003

- 7.50 (- 6.70) 1000 1205 80/100S 230 13.2 17 ..10004 ..10004

- 9.10 (- 8.10) 1200 1405 80/100S 250 14.1 20 ..10005 ..10005

2.000

- 3.40 (- 3.10) 800 1005 80/100S 170

150

22.3 19 ..20001 ..20001

- 5.75 (- 5.75) 800 1005 80/100S 250 23.4 21 ..20002 ..20002

- 7.75 (- 7.00) 1000 1205 80/100S 270 24.4 23 ..20003 ..20003

- 9.10 (- 8.10) 1200 1405 80/100S 290 25.6 24 ..20004 ..20004

3.200

- 5.50 (- 4.90) 800 1075 125/150S 230

175

33.8 21 ..32001 ..32001

- 6.50 (- 5.90) 1000 1275 125/150S 250 34.7 23 ..32002 ..32002

- 9.50 (- 8.80) 1400 1675 125/150S 330 36.8 25 ..32003 ..32003

- 11.00 (- 9.90) 1400 1675 125/150S 350 38.0 27 ..32004 ..32004

5.000

- 5.00 (- 5.00) 800 1075 125/150S 270

225

54.3 26 ..50001 ..50001

- 6.25 (- 6.25) 800 1075 125/150S 290 55.4 27 ..50002 ..50002

- 9.20 (- 9.20) 1200 1475 125/150S 390 58.1 30 ..50003 ..50003

24

Cranes | Hand operated / Overhead crane

Features:

• Van Leusden overhead cranes are available as comple-

te cranes and as crane kits for self-construction

• Solid steel double fl ange wheels, suitable for fl at rails

50/30 mm

• Low pull force on the chain makes the crane easy

to drive



• The cranes delivered complete with: Manual geared

drive, Control height 3 m, control chain, Surface

protection Shot blasting + primer + top coat in

RAL1007, S.W.L. Sticker, Users manual

• Crane kits for crane-constructors: A complete set of

wheel boxes, with transversal shaft, bearing blocks,

hand chain wheel, hand chain, accompanied by a

dimensional sketch. Shot blasted + primer, Basic

welding execution, Crane girder to be welded to the

wheelboxes, Crane girder to be provided by

crane-constructor

Optional:



headroom types



catalogue pages

X-XX

X

M

S+150

S

W

V

LR

A

B

H

B1

B2

A1

H

A2










motions.

3) Specify A or B type crane with order.

Cranes / Hand operated / Overhead crane (Art. group 86000)

S.W.L.

Kg.

S

m 1) 2)

R

mm

L

mm

Wheels

mm

A1

mm

A2

mm

B1

mm

B2

mm

Max. Weight.

Hoist+Trolley

Kg

Max.

Wheelload

[kN]

Handchain

Force

Kg

Crane

86100..

Art. Nr.

Price Crane

Excl. €

Hoist/Trolley

Crane Kit

86150..

Art. Nr.

Price

Crane kit

€

Screw

Fittings

Boltset incl.

€

500

- 4.10 (- 3.70) 800 1090 125/150 196 21 346 171

100

3.4 10 ..05001 ..-05001

- 5.25 (- 4.75) 800 1090 125/150 196 21 346 171 3.8 10 ..05002 ..05002

- 6.75 (- 6.00) 800 1090 125/150 215 22 365 172 3.9 10 ..05003 ..05003

- 8.25 (- 7.40) 1000 1290 125/150 234 22 384 172 4.0 11 ..05004 ..05004

1.000

- 3.95 (- 3.55) 800 1090 125/150 215 22 365 172

105

6.0 15 ..10001 ..10001

- 5.00 (- 4.50) 800 1090 125/150 215 22 365 172 6.1 15 ..10002 ..10002

- 6.00 (- 5.50) 800 1090 125/150 234 22 384 172 6.3 15 ..10003 ..10003

- 7.50 (- 6.70) 1000 1290 125/150 253 23 403 173 6.5 17 ..10004 ..10004

- 9.10 (- 8.10) 1200 1490 125/150 273 24 423 174 6.9 20 ..10005 ..10005

2.000

- 3.40 (- 3.10) 800 1090 125/150 203 25 353 175

150

11.1 19 ..20001 ..20001

- 5.75 (- 5.75) 800 1090 125/150 273 24 423 174 11.5 21 ..20002 ..20002

- 7.75 (- 7.00) 1000 1290 125/150 293 25 443 175 12.0 23 ..20003 ..20003

- 9.10 (- 8.10) 1200 1490 125/150 313 25 463 175 12.6 24 ..20004 ..20004

3.200

- 5.50 (- 4.90) 800 1090 125/150 263 28 413 178

175

16.8 21 ..32001 ..32001

- 6.50 (- 5.90) 1000 1290 125/150 283 29 433 179 17.2 23 ..32002 ..32002

- 9.50 (- 8.80) 1400 1690 125/150 353 27 503 177 18.2 25 ..32003 ..32003

- 11.00 (- 9.90) 1400 1690 125/150 373 28 523 178 18.8 27 ..32004 ..32004

5.000

- 5.00 (- 5.00) 800 1130 160/180 305 32 505 232

225

27.1 26 ..50001 ..50001

- 6.25 (- 6.25) 800 1130 160/180 325 33 525 233 27.5 27 ..50002 ..50002

- 9.20 (- 9.20) 1200 1530 160/180 415 33 615 233 29.9 30 ..50003 ..50003

25

Components | Wheels / Single fl ange

d1

d/M

2

b

b1 b2

6°

D1D

L2 L3

L1

a

L

d1 d/M

b

b1 b2

6°

D D1

2 a

L2 L3

L1

L

FF

Fig.1. Fig.2.Technical information:

Do you need a special design or replacement for an

existing Construction ? Feel free to contact us for more

information. Technical assistance will be provided to

fi nd a correct solution for your specifi c needs.

Features:

• Capacities from 150 - 6.400 Kg

• Heavy duty single fl ange wheels available from our

trolley program, steel C45

• Fully enclosed 2RS bearings, life time lubricated

• Number of bearings: 1 off (Fig. 1) or 2 off (Fig. 2)

• Electric galvanized up till 125/150 model (Fig. 1)

• For fl at and angular beam fl anges

• Available for manual and motor driven trolleys and

cranes

Optional:

• Also available in stainless steel, Aluminum Bronze

CUAL10NI

• Other materials on request

• High temperature executions

• Custom built wheels for replacement or special

applications

• Drive pinions and other components available on

request

Components / Wheels / Single Flange (Art. group 85400)

Max.

Load.

KN

D D1 d/M d1 b b1 b2 a L L1

L2

L3 m ZBearing

2RS

Bearing - KN Fn

N/KN

Mass.

Kg.

Push

85400..

Art. Nr.

Push

Price €

Geared

85400..

Art. Nr.

Geared

Price €

Shaft

85400..

Art. Nr.

Shaft

Price €Min. Max.

Cr.

Dyn.

Co.

Stat.

FIG. 1

1.5 45 60 10 15 20 5 15 13,5 43 21 4 10 9.5 - - 1x6000 3.5 2.0 32 0.3 ..00601 - ..00603

3 60 75 12 20 25 7 18 16 52 25 6 12 10.5 3 23 1x6202 5.9 3.5 25 0.6 ..01101 ..01102 ..01103

6 80 100 16 25 30 8 22 18 64 32 8 15 11 3 31 1x6204 9.8 6.2 20 1.2 ..02201 ..02202 ..02203

9 100 120 20 35 35 10 25 21 76 39 10 18 13 3 38 1x6206 15.0 10.0 17 2.1 ..03301 ..03302 ..03303

13 125 150 24 40 40 10 30 24 87 45 12 20 15.5 3 48 1x6207 19.7 13.6 14 3.5 ..05201 ..05202 ..05203

FIG. 2

8 80S 100 16 25 30 8 22 18 68 36 10 20 4 3 31 2x6203 14.7 8.8 20 1.3 ..03201 ..03202 ..03203

16 125S 150 24 40 40 10 30 24 92 50 15 25 4 3 48 2x6206 30.0 20.0 14 4.0 ..06401 ..06402 ..06403

26 160 190 30 45 50 15 35 27,5 112 60 20 30 7 4 45 2x6207 39.4 27.2 11 9.0 ..10401 ..10402 ..10403

31 160S 190 30 45 50 15 35 27,5 112 60 20 30 7 4 45 2x6208 50.2 35.6 11 9.5 ..12401 ..12402 ..12403

51 200 240 36 55 70 20 50 38,5 147 75 25 35 9 4 58 2x6309 74.2 52.6 9 17 ..16401 ..16402 ..16403

64 200S 240 36 60 70 20 50 38,5 152 80 30 40 9 4 58 2x6310 95.0 71.4 9 17.5 ..25401 ..25402 ..25403

26

Components | Wheels / Double fl ange

Features:

• Capacities from 1.500 - 12.500 Kg

• Heavy duty double fl ange wheels, steel C45

• Diameters up to 500 mm

• Fully enclosed 2RS bearings, life time lubricated

• Wheel shafts delivered as loose item, also in special

dimensions possible

• Available for manual and motor driven trolleys and

cranes

• Standard for 30/20, 50/30 or 60/40 crane rails

available see table

Optional:

• Wheel shaft with fasteners, for application in

constructions, different plate size and thickness.

• Execution with cone clamp or nut key

• Also available in stainless steel, Aluminium Bronze

CUAL10NI

• Other materials on request

• Drive pinions for motor and manual drive

• Custom built wheels for replacement or special

applications

D1 D d

G GF

E

E + 50 mm. H

D1D

G OF

L

L + 50 mm. H

6° Technical information:

Do you need a special design or replacement for an

existing Construction ? Feel free to contact us for more

information. Technical assistance will be provided to

fi nd a correct solution for your specifi c needs.

Components / Wheels / Double fl ange (Art. Group 85600)

Push + Handgeared Double Flange

D

mm

D1

mm

S-355

Rails

d m - z Ro. KN

Nom

2 x 2RS

Bearing

Fn

N / KN

E F G L O H

Push

85600..

Geared

Manual

85600..

Shaft

85600..

Art. Nr Price € Art. Nr Price € Art. Nr Price €

125 150 30 / 20 35 3 - 48 26 6207 16 60 37 11.5 - - 15 ..12530 ..12531 ..03500

125 150 50 / 30 35 3 - 48 36 6307 16 80 57 11,5 - - 15 ..12550 ..12551 ..03501

160 180 50 / 30 40 3 - 58 45 6308 12 80 57 11,5 - - 15 ..16050 ..16051 ..04000

200 220 50 / 30 45 3 - 70 53 6309 9 80 57 11,5 - - 15 ..20050 ..20051 ..04500

Motor driven, Electric, Pneumatic, Hydraulic

D

mm

D1

mm

S-355

Rails

d m - z Nom. Ro. 2 x 2RS

Bearing

Fn

N / KN

E F G L O H

Push

85600..

Geared Motor

85600..

Shaft

85600..KN

V20-25%

KN

V40-40% Art. Nr Price € Art. Nr Price € Art. Nr Price €

125 150 30 / 20 35 3 - 48 22 17 6207 16 60 37 11,5 80 31,5 15 ..12530 ..12533 ..03500

125 150 50 / 30 35 3 - 48 32 25 6307 16 80 57 11,5 100 31,5 15 ..12550 ..12553 ..03501

160 180 50 / 30 40 3 - 58 42 34 6308 12 80 57 11,5 100 31,5 15 ..16050 ..16053 ..04000

200 220 50 / 30 45 3 - 70 53 44 6309 9 80 57 11,5 100 31,5 15 ..20050 ..20053 ..04500

250 272 50 / 30 50 4 - 66 70 57 6310 7 80 57 11,5 110 41,5 15 ..25050 ..25050 ..05000

315 348 50 / 30 55 4 - 85 90 76 6311 6 90 60 15 120 45 15 ..31550 ..31553 ..05500

400 432 50 / 30 60 4 - 106 104 99 6312 5 90 60 15 120 45 15 ..40050 ..40053 ..06000

500 540 60 / 40 70 6 - 88 136 136 6314 4 100 70 15 150 65 20 ..50060 ..50063 ..07000

@ = on request

27

Components | Hand chain wheels / Pinions

Features:

Hand chain Wheels :

• Diameters from 100- 300 mm

• Standard execution suitable for hand chain 5 x 18.5 mm.

• According to DIN 766 A

Pinions;

• For manual geared or motor driven trolleys.

• Standard in C45 material

• Pinions loose supplied

Optional:

Hand Chain Wheels:

• Other shaft diameters and connections

• Non-sparking executions

Pinions:

• In bronze material available

• Other shaft diameters and connections

• Non-sparking executions

• Other number of teeth and modul available

• Shafts, bearings and other drive components on

request

A-A

A

A

E

Dd

B

C

FNest

Sprocket

B-B

B

B

dZ

M

L

K

H

Dst

c.


Hand Chain wheels:

Diameter ø135 / ø195 Electric galvanized.

Diameter ø270 / ø300 / ø380 Blank steel.

Pinions:

Manual drive, material C45 not heat treated.

Motor drive, material C45, heat treated, oil hardened.

Pinions Manual drive (Art. Group 85600)

M Z Dst Shaft

ø d

mm

K

mm

L

mm

H

ø

mm

E

mm

Pinion

85620..

Art. Nr. Price €

3 9 30 15 H 7 12 20 5 - ..30901

4 9 40 20 H 7 22 32 6 - ..40901

Pinions Motor drive (Art. Group 85600)

F G

3 13 42 16 H 7 20 28 - 5 ..31301

3 16 48 16 H 7 20 28 - 5 ..31601

4 13 56 20 H 7 28 38 - 6 ..41301

Handchainwheel (Art. Group 85600)

Diameter

ø D nest

Dst ø

Chain

mm

Shaft

ø d

mm

Material

Aluminium

Chain

DIN 766 A

B

mm

C

mm

E

mm

F

mm85630..

Art. Nr. Price €

100 7 82,6 15 H 7 Aluminium

5 x 18,5

28 38 5 - ..10000

100 7 82,6 15 H 7 Bronze 28 38 5 - ..10001

135 9 106,2 15 H 7 Steel 35 45 6 - ..10002

195 14 165,2 20 H 7 Steel 35 45 6 - ..10003

270 20 236 20 H 7 Steel 35 45 7 - ..10005

300 24 283,2 20 H 7 G.Y. 25.00 35 50 7 - ..10004

380 30 354 20 H 7 G.Y. 25.00 35 60 7 - ..10006

Manual Drive

C-C

C

C

Z

M

d

G

F

E

Dst

c.

Motor Drive

28

Options

Options / Industry Heavy Duty

Rubber buffers on trolley.

• 6-11-22-33 KN

• 52-64 KN

• 84-124 KN

• 164-254 KN

• Tag plate according to customers specifi cation and layout, brass type.

• Tag plate according to customers specifi cation and layout, Stainless steel type.

Parking device, with parking pin.

• 11-22 KN

• 33-64 KN

• 84-124 KN

• 164-254 KN

Parking device with hand chain operated parking spindle.

• 11-22 KN

• 33-64 KN

• 84-124 KN

2929

This page presents an overview of our options. Many more other options are available.



Sh ld h i l t hi h i t ti d i thi t l l f l f t

• Extension of hand chain drive system, M=300 mm max.

• Fixed suspension for special customers hoist.

Beam clamping device, hand chain operated, clamping the trolley to the beam.

• 11-22 KN

• 33-64 KN

• 84-124 KN

• Static load test of the trolley 150% of SWL, incl. manufacturers certifi cate.

Non Corrosive treatments, special surface protection for aggressive environments, outdoor applications, offshore &

marine environments. Reference is made to page 42 of this catalogue for detailed application information.

30

Maritime & Offshore

Our broad experience in the maritime and offshore market resulted in a fi ne tuned range

of products and solutions for this sector.

You will fi nd the best product designs for your application in maritime as well as off-

shore environments.

We have solutions for every kind of operation, from standard, rack and pinion, low

headroom, ultra headroom and many more options. Our products contain both manual

and electric driven solutions. Other types of drive mechanism are always possible.

Especially our Non corrosive products enable you to give a product a much longer life-

time and safe operation. Especially in offshore environments corrosion protection is an

important issue. We can extend the lifetime of trolleys and hoists by applying a special

system for protection.

For protection of equipment for sudden movements and making sure that operation is

safe on board of seagoing vessels we have a range of different solutions available.

We have solutions for every kind of operation

3131

All equipment is designed according to the EC machinery directive and the designated European

standards with applicable declaration of conformity.



Simple parking pin, single side parking

device, double sided parking device.

Rack and pinion driven solution, till a

large angle of inclination. (Also for curved

tracks). Friction wheel drive systems

allowing drive at angles and curves in

extreme conditions.

In projects we build special rack and

pinion driven cranes for Enginerooms,

pumprooms, compressor rooms, etc. You

can buy your complete programme of

lifting equipment for your vessel or plant

at our factory. We will help you fi nding

the right solution and offer you a complete

‘one stop’ investment solution.

Please refer to the special information

page in this chapter for detailed descrip-

tions.

Trolleys

Push & geared / Standard type 32

Hoist-Trolley units Hand driven / Standard 33

Hand driven / Low headroom 34

Hand driven / Ultra low headroom 35

Trolleys Hand driven / Rack & pinion type 37

Hoist-Trolley units Hand driven / Rack & pinion type 38

Trolleys Electrical / Rack & pinion type 39

Hoist-Trolley units Electrical rack & pinion drive Type I 40

Electrical rack & pinion drive Type II 41

Non Corrosive Treatmens Protection against corrosion 42

32

Trolleys | Push & geared / Standard type

Features:


• Unique 3 bolts design, safety & stability

• Long life time, low operational costs









Optional:





• Extended chain wheel drive, M=...mm (max. 300 mm)



• Load test, with certifi cate.

• Parking/Fixing device preventing the trolley for

uncontrolled movements, handchain controlled.

Safe and sure operation during light ship movements.

See table for option price

N L

R

C

AB

E HFG

W

O

D

M


1) * Mass plain type



3) Non corrosive treatments, special surface protection for

aggressive environments, outdoor applications, offshore

& marine environments. Reference to page 42 of this

catalogue for detailed application information.



52/64 KN = INP450.

Trolleys / Push & Geared / Standard type (Art. group 81000-81200)

Capacity

Kg.

Hoist

Mass

Max.

Kg.

Chassis

Type

Adjustable

beam width

min~max

mm. 4)

R(min).

Radius

Beam

2)

mm.

DimensionsChain

Pull

Max.

Kg.

Weight

Kg.

1)

*-**

Push

81000..

Art.Nr.

Push

Price €

Geared

81200..

Art.Nr.

Geared

excl.

Hand-

chain

Price €

Galvanized

Handchain

Control

lenght

Price / m €

Stainless

Handchain

Control

length

Price / m €

Parking

Device

Handchain

controlled

Price / m €

Non Corro-

sive Offshore

protection

>200 μm

Price €

A B C L H W R D E F G N M O

500 100 6 KN55~102

1000 45 60 15 150 125160

75 52 15 45 30 - - - - 3..-00600 -/-

105~152 210 ..-00601 -/-

1.000 120 11 KN

55~102

1500 60 75 18 190 160

175

99 60 20 60 30 65 90 100 10 5-6

..-01100 ..-01100

105~152 225 ..-01101 ..-01101

156~203 275 ..-01102 ..-01102

207~254 325 ..-01103 ..-01103

2.000 250 22 KN

74~127

1600 80 100 22 255 205

215

123 75 27 80 35 65 90 100 16 11-12

..-02200 ..-02200

127~180 270 ..-02201 ..-02201

190~243 330 ..-02202 ..-02202

254~305 390 ..-02203 ..-02203

3.200 150 33 KN

90~143

2000 100 120 25 300 245

250

144 90 35 100 40 70 95 100 20 18-19

..-03300 ..-03300

149~203 310 ..-03301 ..-03301

203~254 360 ..-03302 ..-03302

241~305 410 ..-03303 ..-03303

5.000 300 52 KN

106~156

2900 125 150 30 375 305

270

174 117 40 120 60 100 130 135 20 31-32

..-05200 ..-05200

160~210 325 ..-05201 ..-05201

210~260 375 ..-05202 ..-05202

255~305 420 ..-05203 ..-05203

6.300 200 64 KN

106~156

2900 125 150 30 375 310

270

174 117 40 120 60 100 130 135 25 33-34

..-06400 ..-06400

160~210 325 ..-06401 ..-06401

210~260 375 ..-06402 ..-06402

255~305 420 ..-06403 ..-06403

8.000 550 84 KN fi xed (119 Min)

3500

160 190 35 450 365 bw+150 220 145 45 145 80 105 130 270 16 85-90 ..-08401 ..-08401

10.000 600 104 KN fi xed (131 Min) 160 190 35 450 370 bw+150 220 145 45 145 80 105 130 270 19 90-95 ..-10401 ..-10401

12.500 150 124 KN fi xed (143 Min) 160 190 35 450 370 bw+150 220 145 45 145 80 105 130 270 23 95-100 ..-12401 ..-12401

16.000 700 164 KN fi xed (155 Min)

5500

200 240 50 550 445 bw+185 272 165 42 165 100 135 170 300 20 135-145 ..-16401 ..-16401

20.000 800 204 KN fi xed (170 Min) 200 240 50 550 450 bw+185 272 165 42 165 100 135 170 300 25 140-150 ..-20401 ..-20401

25.000 900 254 KN fi xed (185 Min) 200 240 50 550 455 bw+195 272 165 42 165 100 135 170 380 25 150-160 ..-25401 ..-25401

max. beamwidth

min. beamwidth

bw = beamwidth

33

Hoist-Trolley units | Hand driven / Standard

F1

F

N

LIF

TG

E

B A O

R

L

n

CTechnical information:



For trolleys : / For manual hoist : Page 11








52/64 KN = INP450.

Features:

• Capacities 500-25.000 Kg in standard headroom

execution

• Advantages and high quality combined in one combo

pack unit







• Trolley model 104 KN and higher standard surface





Optional:


• Rubber buffers


• Overload protection (See page 11)

• Stainless Steel load chain, available on request.

(reduced capacity)


uncontrolled movements, handchain controlled



Hoist-Trolley units / Hand driven / Standard type (Art. group 81250/81255)

Capacity

Kg.

Head

Room

G

mm.

No. off

Falls

Trolley

Chassis

Type

Adjustable

beam widht

min~max

mm.

R(min).

Radius

Beam

mm.

DimensionsWeight

Kg.

3 mtr

Hoist / trolley

Push (3 mtrs)

81250..

Hoist / trolley

Geared (3 mtrs)

81255..

Hoist

Loadchain

Lifting

height

Price / m €

Hoist &

trolley

Handchain

controlled

Price / m €

Parking

Device

Handchain

controlled

Price €

Non Corrosive

Offshore

protection

>200 μm

Price €Art. Nr. Price € Art. Nr. Price €A B C E F F1 R L N O n

500 315 1 6 KN55~102

1000 45 60 15 15 30 24 75 150 - - - 11..-00600 -

105~152 ..-00601 -

1.000 360 1 11 KN

55~102

1500 60 75 18 20 36 29 99 190 90 100 2.5m 20

..-01100 ..-01100

105~152 ..-01101 ..-01101

156~203 ..-01102 ..-01102

207~254 ..-01103 ..-01103

1.600 420 1 22 KN

74~127

1600 80 100 22 27 39 31 123 255 90 100 2.5m 30

..-01600 ..-01600

127~180 ..-01601 ..-01601

190~243 ..-01602 ..-01602

254~305 ..-01603 ..-01603

2.000 455 1 22 KN

74~127

1600 80 100 22 27 42 34 123 255 90 100 2.5m 36

..-02200 ..-02200

127~180 ..-02201 ..-02201

190~243 ..-02202 ..-02202

254~305 ..-02203 ..-02203

3.200 525 1 33 KN

90~143

2000 100 120 25 35 48 39 144 300 95 100 2.5m 53

..-03300 ..-03300

149~203 ..-03301 ..-03301

203~254 ..-03302 ..-03302

251~305 ..-03303 ..-03303

5.000 690 3 52 KN

106~156

2900 125 150 30 40 56 47 174 375 130 135 2.5m 70

..-05200 ..-05200

160~210 ..-05201 ..-05201

210~260 ..-05202 ..-05202

255~305 ..-05203 ..-05203

10.000 935 3 104KN fi xed (131 Min) 3500 160 190 35 45 75 68 220 450 135 270 2.5m 175 ..-10401 ..-10401

16.000 1185 5 164 KN fi xed (155 Min)

5500

200 240 50 42 90 81 272 560 155 300 2.5m 305 ..-16401 ..-16401

20.000 1205 6 204 KN fi xed (170 Min) 200 240 50 42 90 81 272 560 155 300 2.5m 415 ..-20401 ..-20401

25.000 1265 8 254 KN fi xed (185 Min) 200 240 50 42 90 81 272 570 170 380 2.5m 495 ..-25401 ..-25401

34

Hoist-Trolley units | Hand driven / Low headroom

Features:

• Capacities 500-5.000 Kg in low headroom execution

• Suitable for narrow spaces and low headroom

applications




• Trolley manufactured for fi xed beamwidth in different

ranges






Optional:

• Stainless Steel nameplate




• Stainless Steel load chain, available on request.

(reduced capacity)


uncontrolled movements, handchain controlled.


See table for option price.

OB A

N

LIF

TG

C

F1

F

M

T

n

R









52/64 KN = INP450.

Hoist-Trolley units / Hand driven / Low Headroom (Art. group 81300-81400)

Capacity

Kg.

Head

Room

G

mm

No.

off

Falls

Trolley

Chassis

Type

Fixed for

beam

width in

range

mm.

DimensionsWeight

Kg.

3 mtr

Hoist / trolley

Push (3 mtrs)

81300

Hoist / trolley

Geared (3 mtrs)

81400

Hoist

Loadchain

lifting height

Price / m €

Hoist & trolley

Handchain

Control height

Price / m €

Overload

Protec-

tion

Price €

Parking

Device

Handchain

controlled

Price €

Non Corrosive

Offshore

protection

>200 μm

Price €Art. Nr. Price € Art. Nr. Price €A B C E F F1 R T L M N O n

500 210 1 6 KN 55-300 45 60 15 15 30 24 75 33 248 - - - - 12 ..-00600 -

1.000 245 1 11 KN 55-300 60 75 18 20 36 29 99 42 310 65 90 100 2.5m 22 ..-01100 ..-01100

2.000 315 1 22 KN 74-300 80 100 22 27 42 34 123 49 395 65 90 100 2.5m 40 ..-02200 ..-02200

3.200 370 1 33 KN 90-300 100 120 25 35 48 39 144 59 455 70 95 100 2.5m 60 ..-03300 ..-03300

5.000 475 3 52 KN 106-300 125 150 30 40 56 47 174 65 590 100 130 135 2.5m 75 ..-05200 ..-05200


35

Hoist-Trolley units / Hand driven / Ultra Low Headroom (Art. group 81650)

Capacity

Kg.

Head

Room

G

mm

No.

off

Falls

Trolley

Chassis

Type

Fixed for

beam

width in

range

mm.

DimensionsWeight

Kg.

3 mtr

Hoist / trolley

Geared (3 mtrs)

81650

Hoist

Loadchain

lifting height

Price / m €

Hoist & trolley

Handchain

Control height

Price / m €

Overload

Protection

Price €

Parking Device

Handchain

controlled

Price €

Non Corrosive

Offshore

protection

>200 μm

Price €Art. Nr. Price €A B C E F F1 R L N U O n

1.000 125 2 22 KN 74-300 80 100 22 20 30 24 226 465 140 105 100 2.5m 40 ..-01100

2.000 150 2 33 KN 90-300 100 120 25 20 36 29 266 550 145 150 135 2.5m 120 ..-02200

3.200 170 2 52 KN 106-300 125 150 30 26 39 31 310 635 175 150 135 2.5m 150 ..-03300

6.000 285 2 84 KN 119-300 160 190 35 33 48 39 430 900 225 200 300 2.5m 300 ..-05200

@ = on request


Hoist-Trolley units | Hand driven / Ultra low headroom

E

U N

n

F1

F

O

GLI

FT

R








33 KN = INP400, 52/64 KN = INP450.

Suitable for extreme narrow spaces and extreme Low headroom applications.

Features:

• Capacities 1.000-6.300 Kg in Ultra low headroom

execution

• Low in weight, ultralow headroom


• The hoist has double safety pawl, safe and sure

brakes

• Complete unit with standard surface treatment, 2

layer Alkyd paint 80 μm, orange colour RAL2008

Optional:



• Stainless Steel nameplate




(reduced capacity)


uncontrolled movements, handchain controlled

safe and sure operation during light ship movements.


36

A ‘one stop’ investment solution

37

Trolleys | Hand driven / Rack & pinion type

W

S

NM

C

AB

L

R

D


1) Curved beams possible. For curved beams always

contact us or your local Agent






33 KN = INP400, 52/64 KN = INP450.

Features:


• The HD3C rack and pinion trolley have a smooth

movement and needs a low hand chain pull force to

move, due to its optimal gear ratio’s

• The worm gear box is of a self braking type and

suitable for 2 or 5 degrees list and trim

• Other angles on request

• Hand chain wheel with chain guides

• All Trolley models with standard surface treatment, 2

layer Alkyd paint 80 μm, RAL7021



Optional:




• Toothracks as loose item, to be welded under the

monorail beam

Trolleys / Hand driven / Rack & Pinion type (Art. group 83600)

Capacity

Kg.

Hoist

Mass

Max.

Kg.

Chassis

Type

Beam width

fi xed

“bw”

mm.

Dimensions Geared

Max. 2º

83600..

Geared

Max. 5º

83600..

Galvanized

Handchain

Control

lenght

Price / m €

A B C L W R D S N M

Modul Art. Nr. Price € Modul Art. Nr. Price €

500 100 11 KN fi xed 60 75 18 190 bw+85 99 120 @ 180 65 M = 3 ..-00621 M = 3 ..-00651

1.000 120 22 KN fi xed 80 100 22 255 bw+85 123 130 @ 185 70 M = 3 ..-01121 M = 3 ..-01151

2.000 250 22 KN fi xed 80 100 22 255 bw+85 123 130 @ 185 70 M = 3 ..-02221 M = 3 ..-02251

3.200 150 33 KN fi xed 100 120 25 300 bw+105 144 140 @ 220 75 M = 3 ..-03321 M = 3 ..-03351

5.000 300 52 KN fi xed 125 150 30 375 bw+120 174 175 @ 230 80 M = 3 ..-05221 M = 4 ..-05251

6.300 200 64 KN fi xed 125 150 30 375 bw+120 174 195 @ 250 80 M = 3 ..-06421 M = 4 ..-06451

8.000 550 84 KN fi xed 160 190 35 450 bw+150 220 240 @ 265 95 M = 4 ..-08421 M = 6 ..-08451

10.000 600 104 KN fi xed 160 190 35 450 bw+150 220 245 @ 290 95 M = 4 ..-10421 M = 6 ..-10451

12.500 150 124 KN fi xed 160 190 35 450 bw+150 220 275 @ 320 100 M = 4 ..-12421 M = 6 ..-12451

Toothracks Art. Nr. Price €

M = 3 toothrack 30 / 20 mm, mat. S355, per mtr 80000-33020



bw = beamwidth

@ = on request

38

Hoist-Trolley units | Hand driven / Rack & pinion type

Features:

• Capacities 500- 10.000 Kg in standard headroom

execution

• Advantages and high quality combined in one combo

pack unit



• All Trolley models with standard surface treatment, 2

layer Alkyd paint 80 μm, RAL7021





Optional:




• Toothracks as loose item, to be welded under the

monorail beam

F

F1

LIF

TG

NM

C

AB

L

R

n




For trolleys : / For manual hoist : Page 11

1) Curved beams possible. For curved beams always







33 KN = INP400, 52/64 KN = INP450.

Hoist-Trolley units / Hand driven / Rack & Pinion type (Art. group 83650)

Capacity

Kg.

Head

Room

G

mm.

Chassis

Type

Fixed

beam

width

mm.

Dimensions Hoist/Trolley unit Geared

Max. 2º

83650..

Hoist/Trolley unit Geared

Max. 5º

83650..

Hoist Loadchain

Lifting height

Price / m €

Hoist & trolley

Handchain

Control height

Price / m €

Overload

Protection

Price €

A B C F F1 R L N M n


500 380 11 KN fi xed 60 75 18 30 24 99 190 180 65 2.5 m M = 3 ..-00621 M = 3 ..-00651

1.000 430 22 KN fi xed 80 100 22 36 29 123 255 185 70 2.5 m M = 3 ..-01121 M = 3 ..-01151

2.000 510 22 KN fi xed 80 100 22 42 34 123 255 185 70 2.5 m M = 3 ..-02221 M = 3 ..-02251

3.200 575 33 KN fi xed 100 120 25 48 39 144 300 220 75 2.5 m M = 3 ..-03321 M = 3 ..-03351

5.000 750 52 KN fi xed 125 150 30 56 47 174 375 230 80 2.5 m M = 3 ..-05221 M = 4 ..-05251

10.000 1035 104 KN fi xed 160 190 35 75 68 220 450 290 95 2.5 m M = 4 ..-10421 M = 6 ..-10451

@ = on request





39

Trolleys | Electrical / Rack & pinion type

W

S

NM

C

AB

L

R

D



2) Curved beam possible. For curved beams always



a guide roller set if necessary


3) These trolleys are not suitable for manufacturing of

cranes or twin driven trolleys.






33 KN = INP400, 52/64 KN = INP450.

Features:

• Capacities 500 up to 12.500 Kg in standard model

• The HD3C electric driven rack & pinion trolley with

self braking worm geared motor has the advantage

that no separate electromagnetic brake is necessary

• The worm gear box is of a self braking type and

suitable for 2 or 5 degrees list and trim

• Other angles available on request

• Combine with all types electrical chain hoists





• Motor IP54, ISO F, 400/230V - 3 Ph - 50Hz,

• Trolley manufactured for fi xed beam width

Optional:


• Switch box with relays for trolley drive for integration

with hoist




Trolleys / Electrical / Rack & Pinion type (Art. group 83700)

Capacity

Kg.

Hoist

Mass

Max.

Kg.

Chassis

Type

Beam

Width

fi xed

“bw”

mm.

Dimensions Electric

Max. 2º (Incl. LS)

83700..

Electric

Max. 5º (Incl. LS)

83700..A B C L W R D S N M


1.000 120 22 KN fi xed 80 100 22 255 bw+85 123 130 @ 185 70 M = 3 ..-01121 M = 3 ..-01151

2.000 250 22 KN fi xed 80 100 22 255 bw+85 123 130 @ 185 70 M = 3 ..-02221 M = 3 ..-02251

3.200 150 33 KN fi xed 100 120 25 300 bw+105 144 140 @ 220 75 M = 3 ..-03321 M = 3 ..-03351

5.000 300 52 KN fi xed 125 150 30 375 bw+120 174 175 @ 230 80 M = 3 ..-05221 M = 3 ..-05251

6.300 200 64 KN fi xed 125 150 30 375 bw+120 174 195 @ 250 80 M = 3 ..-06421 M = 4 ..-06451

8.000 550 84 KN fi xed 160 190 35 450 bw+150 220 240 @ 265 95 M = 4 ..-08421 M = 6 ..-08451

10.000 600 104 KN fi xed 160 190 35 450 bw+150 220 245 @ 290 95 M = 4 ..-10421 M = 6 ..-10451

12.500 150 124 KN fi xed 160 190 35 450 bw+150 220 275 @ 320 100 M = 4 ..-12421 M = 6 ..-12451

@ = on request





bw = beamwidth

40

Hoist-Trolley units | Electrical rack & pinion drive Type I

Features:

• Capacities 500 - 1.000 - 2.000 Kg in standard execution


in one combopack








that no separate electromagnetic brake is necessary.

• Other angles available on request



• Motor IP54, ISO F, 400/230V - 3 Ph - 50Hz



• Temperature class -10°….+40°C

Optional:








F1 LIF

TG

R

L

BA

C

MN












33 KN = INP400, 52/64 KN = INP450.

Hoist-Trolley units / Electrical / Rack & Pinion type I (Art. group 83725)

Hoist Hoist + Trolley Rack and Pinion Max. 5º

Capacity

Kg.

No.

Of Falls

Lifting

Speed

m/min

FEM

9,511

ISO 4301

Lifting

Height

Standard

Art. No.

83725..

Trolley

Type

Beamwidth

“bw” mm

min-max

mm

G A B C N M R L

Basic Unit

3 mtrs Lift

Price €

6 mtrs

Lift

Price €

Limit

Switches

Hoisting

Price €

Travel Limit

Switches

Price €

Towing arm

power

Price €

500 2/1 4,0 / 1,0 1Am 3 mtrs ..05001 22 KN fi xed 595 80 100 22 235 162 123 255

1.000 2/1 4,0 / 1,0 1Am 3 mtrs ..01101 22 KN fi xed 595 80 100 22 235 162 123 255

2.000 2/1 5,0 / 1,25 1Am 3 mtrs ..20001 22 KN fi xed 700 80 100 22 266 179 123 255

bw = beamwidth

41

Hoist-Trolley units | Electrical rack & pinion drive Type II

Features:

• Capacities 3.200 - 5.000 - 6.300 Kg


in one combopack.




• Integrated slipping clutch, against overload.



that no separate electromagnetic brake is necessary.

• Other angles available on request.



• Motor IP54, ISO F, 400/230V - 3 Ph - 50Hz



• Temperature class - 20°C ... +40°C.

Optional:

• Alternative supply voltage.





• IP56/66 protection for motors


• Load test, with certifi cate.

LIF

T

F1

G

R

BA

C

MNL

83725 Hoist-Trolley units / Electrical / Rack & Pinion type II

Hoist Hoist + Trolley Rack and Pinion Max. 2º Rack and Pinion Max. 5º

Capacity

Kg.

No.

Of Falls

Lifting

Speed

m/min

FEM

9,511

ISO 4301

Lifting

Height

Standard

Art. No.

89101..

Trolley

Type

beam-

width

“bw”

mm

G A B C N M R LBasic

Unit

Price €

6 mtrs

Lift

Price €

Limit

Switches

Hoisting

Price €

Travel

Limit

Switches

Price €

Towing

arm

power

Price €

Basic

Unit

Price €

6 mtrs

Lift

Price €

Limit

Switches

Hoisting

Price €

Travel

Limit

Switches

Price €

Towing

arm

power

Price €

3.200 2/1 4,0 / 1,0 1Bm 3 mtrs ..32001 33 KN fi xed 820 100 120 25 315 181 144 300

5.000 2/1 4,0 / 1,0 1Am 3 mtrs ..50001 52 KN fi xed 865 125 150 30 316 206 174 375

6.300 2/1 3.2/0.75 1Bm 3 mtrs ..63001 64 KN fi xed 885 125 150 30 316 206 174 375







2) Non corrosive treatments, special surface protection


offshore & marine environments. Reference to page xx

of this catalogue for detailed application information.


52/64 KN = INP450.

bw = beamwidth

42

Non Corrosive Treatments | Protection

For over the years the demand of lifting gear which shall be resistant against corrosion

has grown intensively. Most of the small lifting equipment is delivered to the market

with a standard powder coating or alkyd resin based painting systems with 60-80 μm

protective coating. The equipment returning from drilling rigs, offshore vessels every

year shows intensively corrosion and has to be painted every year or even in shorter

periods.

Lifting equipment used as loose gear for maintenance even lasts shorter, because this

equipment suffers lot of damage due to the transport on board. The standard paint

system has a lot of impact to resist and is damaged very fast. High costs are made in

order to give the equipment a longer lifetime by disassembly and repainting.

Equipment permanently installed is also suffering heavy corrosion attacks due to the

saline, salty and wet environment.

Since the lifting equipment like hand chain hoists, trolleys and combinations have

small surfaces the usage of heavy paint systems is very diffi cult. Therefore we have

developed a system of corrosion protection based on the standard environment as

laid down in ISO 12944 C5I, - industrial areas with high humidity and aggressive at-

mosphere - and C5M, - Maritime and offshore environments with high salinity - .

Guaranteed long lifetimee

u

n

d

h

43

against corrosion

ZincAL Protection system.

The ZincAL protection system is applied to the separate parts of the hoist and

trolley units by a fl ame spraying process. The top color of such a treatment is being

recognized by the typical grey color. On top of this system a customers top coat with a

specifi c color can always be applied as an option.

The advantages of our Non Corrosive treatments are :

• Heavy duty corrosion resistance for longer periods.

• Impact resistant corrosion protection layer of min. 200 μm, self closing after damage

due to Zinc component in the alloy.

• Longer lifetime and repainting not necessary.

• Environmental friendly, replacement due to log lifetime repainting schedule.

• Well known protection system in offshore as well as maritime application.

• Universal protection against all kinds of aggressive components.

• Can be applied to single units and large quantities of units.

An optional system with AISI material being applied is being used in situations where

e.g. zinc or paint is not allowed.

Of course the use of various offshore paint systems are possible too when large

quantities can be reached. You can always contact us for more information.

For the separate prices we refer to the further catalog information at the separate pages

with the Non Corrosive options mentioned.

We have solutions for every kind of operation

For over 40 years of experience in the maritime and offshore sector!

Van Leusden is a well known manufacturer and supplier of special

lifting equipment on board of vessels, platforms and other kinds of

maritime environments.

Working in the maritime, oil and gas industries means working in

extreme conditions. Lifting equipment must comply with the most

extreme conditions and able to resist the forces of gravity.

Do you need to make the most of the space you have and literally

need every millimeter you can get ? Our engine room and pump

room cranes and ultra compact lifting devices are just spelling the

answer. Do loads to be moved through curves and be manouvered

effortlessly around obstacles? Van Leusden supplies a variety of

slewing trolleys, telescopic travelling cranes with a guaranteed op-

timum action radius.

Van Leusden has a wide experience in the design, engineering and

manufacturing of special cranes for Maritime and Offshore applications.

Especially in the range for applications in Engine rooms, pump

rooms, compressor houses en other maritime / offshore area’s Van

Leusden has a wide range of solutions.

We can take care of you complete program of lifting equipment needed

on board your vessel or platform. We have a lot of solutions for low

headroom, narrow spaces, curved tracks, etc, etc.

We can guide you through the process from engineering from scratch

to the delivery of a complete installation on board all according to

you specifi c demands and specifi cations.

Do you have a specifi c hoisting problem? Do not worry, we will fi nd

you a suitable design to fi t your demands.

r

45

This page shows you previous delivered

cranes from the projects we have comple-

ted. Our clients are coming from all over

the world. Many makers’ lists present Van

Leusden as preferred manufacturer for

their cranes on board.

Any queries regarding this subject can be

directly discussed with your local agent or

directly with us.

Feel free to contact us or your local agent

for more information or visit our website

www.vanleusden.com

46

Explosion protection

Using the correct and suitable equipment in a hazardous environments is very impor-

tant. We have the knowledge in advising you the conversions from standard manual

hoisting equipment into Explosion protected equipment. You can be assured of the

correct specifi cations.

We have developed several solutions for manual hoists and trolleys and cranes with the

correct specifi cations for operation in Explosion hazardous areas.

Our standard programme of lifting equipment can be converted into Explosion protec-

ted, Non sparking equipment. The technology combined with our corrosion protection

systems enables you to apply your products into various environments, like offshore,

chemical, petrochemical industries. Heavy duty equipment, with right protection ena-

bles you to operate safe, sure and with a guaranteed long life time.

All our equipment is evaluated and complies with ATEX regulations for explosion pro-

tection. The equipment is accompanied by a declaration of conformity and applicable

manuals for safe operation.

Explosion protection on manual hoists and trolleys is mainly provided by Non Sparking

constructions and preventions in the general design of the device.

The principle of Ferro – Non Ferro contact parts, corrosion protection and safety design

principles is used to minimize the risk of generating heat and sparks.

Guaranteed long lifetime

principles is used to

e

v

c

c

a

47

The explosion protection systems allow combinations with Non Corrosive treatments as well.

Excellent combinations for high quality equipment in special environments.

Do you have any questions or special queries, please feel free to contact you local

dealer or us directly!

The basis for this protection is guideline 94/9/EC European ATEX Guidelines.

The equipment is classifi ed to be used in CAT. II environments.

The following degrees of protection can be manufactured :

1. Basic Protection

Equipment of the type Basic protection can be used in Zone 2 for gases of explosion

group IIA & IIB provided that Hydrogen Sulphide and Ethylene Oxide are excluded.

These devices have a minimum degree of protection against sparking on the fast

contact parts and against corrosion of certain critical contact parts.

The devices are designated with the following classifi cation: EX II 3 IIB c T3 (Zone 2)

2. Medium Protection

Equipment of the type Medium protection can be used in Zone 1&2 for gases of ex-

plosion group IIA & IIB provided that Hydrogen Sulphide and Ethylene Oxide are ex-

cluded.

These devices have an increased degree of protection against sparking on the fast

contact parts and that of designated critical contact parts and against corrosion of

certain parts.

The devices are designated with the following classifi cation: EX II 2 IIB c T3 (Zone 1)

3. High Protection

Equipment of the type High protection can be used in Zone 1&2 for gases of explosion

group IIA & IIB & IIC provided that Hydrogen Sulphide and Ethylene Oxide are excluded.

These devices have an increased degree of protection against sparking on the fast

contact parts and that of designated critical contact parts and against corrosion of

certain parts.

To prevent the risk for sparking some parts are replaced for non corrosive materials and

safe working loads are reduced for safety and in relation to the use of non corrosive

materials.

The devices are designated with the following classifi cation: EX II 2 IIC c T3 (T4)

For each product there is a description on the product page.

Trolleys

Push & geared / Standard type /

Explosion protected 48

Push & geared / Stainless steel 49

Hoists Hand driven chain hoists /

Explosion protected / Basic / Medium 50

Hand driven chain hoists /

Explosion protected / High 51

Hoist-Trolley units Hand driven / Explosion protected /

Basic / Medium 52

Hand driven / Explosion

protected / High 53

Hand driven / Low headroom /

Explosion protected / Basic / Medium 54

Hand driven / Low headroom /

Explosion protected / High 55

Hand driven / Ultra low

headroom / EX. 56

Cranes Hand operated /

Under slung crane / EX. 57

Hand operated /

Overhead crane / EX. 58

Air Hoist Profi TI / Heavy Duty 60

Profi TI / Trolley-Hoist

combinations / Heavy Duty 61

Profi EH / Monorail Air Hoist

Units / Heavy Duty 62

Profi UH / Ultra low Monorail

Hoists / Heavy Duty 63

48

Trolleys | Push & geared / Standard type / Explosion protected

Features:

• Capacities 500- 25.000 Kg

• Explosion protected model in Basic/Medium execution

suitable up till Ex Class Ex II 2 G IIB T3 (Zone 1&2)

Non Sparking protection of fast moving mechanical

contact parts and rubber buffers on trolley

• Explosion protected model in High execution suitable

up till Ex Class Ex II 2 G IIC T3 (Zone 1)

• Non sparking protection of fast moving mechanical

contact parts rubber buffers, increased with non

sparking protection of wheels and handchains





• Design according to EN 13157 and ATEX for

explosion protection, CE-marking & Declaration of

conformity included

Optional:









D

E

AB

C

W

O

MN

FG

H

RL Technical information:










52/64 KN = INP450.

Trolleys / Push & Geared / ATEX Explosion protected type (Art. group 83800-83900)

Capa-

city

Kg.

Hoist

Mass

Max.

Kg.

Chassis

Type

Adjustable

beam width

min~max

mm.

R(min).

Radius

Beam

2)

mm.

Dimensions Chain

Pull

Max.

Kg.

Weight

Kg.

1)

*-**

Push

83800..

Art. Nr.

Push

Basic/

medium

Protec-

tion

83800..

Price €

Push

High

Protec-

tion

83900..

Price €

Geared

Art. Nr.

GearedBasic/

mediumProtec-

tionExcl.

Hand-chain

83810..Price €

Hand

Chain

Galv.

per m

Price €

Geared

High

Protec-

tion

Excl.

Hand-

chain

83910..

Price €

Hand

Chain

S.St.

per m

Price €

Non Cor-

rosive

Offshore

protec-

tion

>200 μm

Price €


500 100 6 KN55~102

1000 45 60 15 185 125160

75 52 15 45 30 - - - - 3..-00600 ..-00600

105~152 210 ..-00601 ..-00601

1.000 120 11 KN

55~102

1500 60 75 18 225 160

175

99 60 20 60 30 65 90 100 10 5-6

..-01100 ..-01100

105~152 225 ..-01101 ..-01101

156~203 275 ..-01102 ..-01102

207~254 325 ..-01103 ..-01103

2.000 250 22 KN

74~127

1600 80 100 22 290 205

215

123 75 27 80 35 65 90 100 16 11-12

..-02200 ..-02200

127~180 270 ..-02201 ..-02201

190~243 330 ..-02202 ..-02202

254~305 390 ..-02203 ..-02203

3.200 150 33 KN

90~143

2000 100 120 25 350 245

250

144 90 35 100 40 70 95 100 20 18-19

..-03300 ..-03300

149~203 310 ..-03301 ..-03301

203~254 360 ..-03302 ..-03302

251~305 410 ..-03303 ..-03303

5.000 300 52 KN

106~156

2900 125 150 30 425 305

270

174 117 40 120 60 100 130 135 20 31-32

..-05200 ..-05200

160~210 325 ..-05201 ..-05201

210~260 375 ..-05202 ..-05202

255~305 420 ..-05203 ..-05203

6300 200 64 KN

106~156

2900 125 150 30 425 310

270

174 117 40 120 60 100 130 135 25 33-34

..-06400 ..-06400

160~210 325 ..-06401 ..-06401

210~260 375 ..-06402 ..-06402

255~305 420 ..-06403 ..-06403

8.000 550 84 KN fi xed (119 Min)

3500

160 190 35 515 365 bw+150 220 145 45 145 80 105 130 270 16 85-90 ..-08401 ..-08401

10.000 600 104 KN fi xed (131 Min) 160 190 35 515 370 bw+150 220 145 45 145 80 105 130 270 19 90-95 ..-10401 ..-10401

12.500 150 124 KN fi xed (143 Min) 160 190 35 515 370 bw+150 220 145 45 145 80 105 130 270 23 95-100 ..-12401 ..-12401

16.000 700 164 KN fi xed (155 Min)

5500

200 240 50 615 445 bw+185 272 165 42 165 100 135 170 300 20 135-145 ..-16401 ..-16401

20.000 800 204 KN fi xed (170 Min) 200 240 50 615 450 bw+185 272 165 42 165 100 135 170 300 25 140-150 ..-20401 ..-20401

25.000 900 254 KN fi xed (185 Min) 200 240 50 615 455 bw+195 272 165 42 165 100 135 170 380 25 150-160 ..-25401 ..-25401

min. beamwidth

max. beamwidth

bw = beamwidth

49

Trolleys | Push & geared / Stainless steel

N L

R

C

AB

E HFG

W

O

D

M



** Mass Geared type, excl. hand chain 1 mtr Lift = 1Kg.


Features:



• Trolley chassis, wheels, bearings, and other construc-

tion parts in Stainless Steel AISI316

• Solution for extreme corrosive atmospheres

• Applications in various area’s like Offshore platforms,

Food industry, Chemical of Pharmaceutical industries

Optional:








Trolleys / Push & Geared / Stainless type (Art. group 82200-82250)

Capacity

Kg.

Hoist

Mass

Max.

Kg.

Chassis

Type

Fixed

beam width

range min-max

mm.

R(min).

Radius

Beam

2)

mm.

Dimensions

Chain

Pull

Max.

Kg.

Weight

Kg.

1)

*-**

Push

82200..

Art. Nr.

Push

Price €

Geared

82250..

Art. Nr.

Geared

excl.

Hand-

chain

Price €

Stainless

Handchain

Control

Length

Price / m €


500 100 6 KN55-102

1000 45 60 15 150 125160

75 52 15 45 30 - - - - 3..-00600 -/-

105-152 210 ..-00601 -/-

1.000 120 11 KN

55-102

1500 60 75 18 190 160

175

99 60 20 60 30 65 90 100 10 5-6

..-01100 ..-01100

105-152 225 ..-01101 ..-01101

156-203 275 ..-01102 ..-01102

207-254 325 ..-01103 ..-01103

2.000 250 22 KN

74-127

1600 80 100 22 255 205

215

123 75 27 80 35 65 90 100 16 11-12

..-02200 ..-02200

127-180 270 ..-02201 ..-02201

190-243 330 ..-02202 ..-02202

254-305 390 ..-02203 ..-02203

3.200 150 33 KN

90-143

2000 100 120 25 300 245

250

144 90 35 100 40 70 95 100 20 18-19

..-03300 ..-03300

149-203 310 ..-03301 ..-03301

203-254 360 ..-03302 ..-03302

251-305 410 ..-03303 ..-03303


50

Hoists | Hand driven chain hoists / Explosion protected

Features:

• Capacities 500 - 32.000 Kg. in standard execution.

• Super modern, excellent combination with Atlas

Explosion protected trolleys.

• Explosion protected model in Basic execution

suitable up till Ex Class Ex II 3 G IIB T3 (Zone 2)

• Non Sparking protection of fast moving mechanical

contact parts of the hand chain movements and

internal fast moving hoist parts. Hoist with electric

galvanized chains

• Explosion protected model in Medium execution

suitable up till Ex Class Ex II 2 G IIB T3 (Zone 1) Non

Sparking protection of fast moving mechanical contact

parts of the hand chain movements and internal fast

moving hoist parts, extended with non sparking top

and load hook. Hoist with electric galvanized chains

• Compact & light in weight

• Robust body construction, prolonging durability

• Low pulling effort

• 2 independent pawls are to enhance safety &

protection

• Automatic load brake

• Heavy duty reduction gear & load sheave

• High safety factor

• Low head room

• Easy and low maintenance cost

Hoists / Hand chain driven hoists ATEX BASIC / MEDIUM (Art. group 86800)

Capacity

Kg.

Headroom

G

mm.

Max. Pull

Handchain

Kg.

No. Of

Falls

Chain

dim.

mm.

Weight

3 mtrs.

Lift

Kg.

Dimensions

ATEX BASIC

EX 3G IIB T3

ATEX MEDIUM

EX 2G IIB T3

Load

Chain

per m

Price €

Hand

Chain

per m

Price €

Overload

Protection

Price €

Option Option

A B D E F F1 86810..

Art. Nr.

3 mtrs. Lift

Execution

Price €

86810..

Art. Nr.

3 mtrs. Lift

Execution

Price €

Protection 86810..Art. Nr.

Non Corrosive

ZincAlPrice €


Non Corrosive

AISIPrice €

500 260 21 1 5 8 82 56 90 48 30 24 ..-00510 ..-00520 ..-00570 ..-00580

1.000 300 24 1 6,3 10,5 83 63 100 59 36 29 ..-01010 ..-01020 ..-01070 ..-01080

1.600 345 29,5 1 7,1 15 90 75 115 69 39 31 ..-01610 ..-01620 ..-01670 ..-01680

2.000 380 33,5 1 7,9 21 98 85 132 82 42 34 ..-02010 ..-02020 ..-02070 ..-02080

3.200 435 38 1 10 30,5 106 92 160 94 48 39 ..-03210 ..-03220 ..-03270 ..-03280

5.000 575 36 3 7,1 35 90 75 188 94 56 47 ..-05010 ..-05020 ..-05070 ..-05080

10.000 790 43 3 10 76 106 92 283 122 75 68 ..-10010 ..-10020 ..-10070 ..-10080

16.000 1020 47 5 10 155 106 92 340 205 90 81 ..-16010 ..-16020 ..-16070 ..-16080

20.000 1040 45x2 6 10 250 153 153 390 390 90 81 ..-20010 ..-20020 ..-20070 ..-20080

25.000 1060 44x2 8 10 320 185 185 390 390 90 81 ..-25010 ..-25020 ..-25070 ..-25080

32.000 1470 47x2 10 10 440 215 215 400 400 110 95 ..-32010 ..-32020 ..-32070 ..-32080

@ = on request

F

F1

GLI

FT

B A E D

G

LIF

T

F1

F

G

AB DE

G

F1F

GLI

FT

A B D E

G

F

F1

GLI

FT

B A E D

G

500 Kg - 3.200 Kg 5.000 Kg - 10.000 Kg 16.000 Kg 20.000 Kg - 32.000 Kg

BASIC / MEDIUM

51





internal fast moving hoist parts, extended with non

sparking top and load hook and stainless steel non

sparking hand chain. (Reduced capacity)

Optional:

• Integration directly into standard trolley possible to

get the lowest headroom possible, see page 52

• Low and ultra low headroom types available, see

page 54 and 56


Non corrosive execution, with special protection by

fl ame spraying, in ZincAl or special paint system

See page 42 for more information

Design according to ATEX for explosion protection,

CE-marking & Declaration of conformity included

Hoists / Hand chain driven hoists ATEX HIGH (Art. group 86800)

Capacity

Kg.

Headroom

G

mm.

Max. Pull

Hand-

chain

Kg.

No. Of

Falls

Chain

dim.

mm.

Weight

3 mtrs.

Lift

Kg.

Dimensions

ATEX HIGH

EX II 2G IIC T3

Load

Chain

per m

Price €

Handchain

Stainless St.

per m

Price €

Overload

Protection

Price €

Option

Loadchain

Stainless St.

per m

Price €

Option Option

A B D E F F1 86810..

Art. Nr.

3 mtrs. Lift

Execution

Price €


Non Corrosive

ZincAlPrice €


Non Corrosive

AISIPrice €

500 260 21 1 5 8 82 56 90 48 30 24 ..-00550 ..-00570 ..-00580

1.000 300 24 1 6,3 10,5 83 63 100 59 36 29 ..-01050 ..-01070 ..-01080

1.250 345 29,5 1 7,1 15 90 75 115 69 39 31 ..-01650 ..-01670 ..-01680

2.000 435 38 1 10 30,5 106 92 160 94 48 39 ..-03250 ..-03270 ..-03280

3.750 575 36 3 7,1 35 90 75 188 94 56 47 ..-05050 ..-05070 ..-05080

6.000 790 43 3 10 76 106 92 283 122 75 68 ..-10050 ..-10070 ..-10080

10.000 1020 47 5 10 155 106 92 340 205 90 81 ..-16050 ..-16070 ..-16080

12.000 1040 45x2 6 10 250 153 153 390 390 90 81 ..-20050 ..-20070 ..-20080

16.000 1060 44x2 8 10 320 185 185 390 390 90 81 ..-25050 ..-25070 ..-25080

20.000 1470 47x2 10 10 440 215 215 400 400 110 95 ..-32050 ..-32070 ..-32080

@ = on request

Basic unit price with electric galvanized load chain and Stainless steel Hand Chain. : For increased NON SPARKING protection Stainless Steel Loadchain can be used.

F

F1

GLI

FT

B A E D

G

LIF

T

F1

F

GAB DE

G

F1F

GLI

FT

A B D E

G

F

F1

GLI

FT

B A E D

G

500 Kg - 3.200 Kg 5.000 Kg - 10.000 Kg 16.000 Kg 20.000 Kg - 32.000 Kg

Hoists | Hand driven chain hoists / Explosion protected

HIGH

52

Hoist-Trolley units | Hand driven / Explosion protected

F

F1

LIF

TG

E

AB

C

O

N

nn

R

LTechnical information:



For trolleys : Page 48 / For manual hoist : Page 50/51








52/64 KN = INP450.

Features:


• Advantages and high quality in one combo pack







• Trolley model 104 KN and higher, standard surface









internal fast moving hoist parts

• Hoist with electric galvanized chains



Sparking protection of fast moving mechanical



sparking top and load hook. Hoist with electric

galvanized chains

Hoist-Trolley units / Hand driven / Standard type (Art. group 83800) ATEX BASIC/MEDIUM

Capa-

city

Kg.

Head

Room

G

No.

off

Falls

Trolley

Chassis

Type

Adjustable

beam width

min~max

mm.

R(min).

Radius

Beam

mm.

Dimensions

Weight

Kg.

1)

*-**

Hoist / trolleyPush (3 mtrs)ATEX BASIC

EX II 3G IIB T383820..

Hoist / trolleyPush (3 mtrs)ATEX MEDIUMEX II 2G IIB T3

83830..

Hoist / trolleyGeared (3 mtrs)

ATEX BASICEX II 3G IIB T3

83825..

Hoist / trolleyPush (3 mtrs)ATEX MEDIUMEX II 2G IIB T3

83835..

Hoist

Loadchain

Lifting height

Price / m €

Hoist & trolley

Handchain

Control height

Price / m €


Art. Nr. Price € Art. Nr. Price € Art. Nr. Price € Art. Nr. Price €

500 315 1 6 KN55~102

1000 45 60 15 15 30 24 75 185 - - - 11..-00600 ..-00600 - -

105~152 ..-00601 ..-00601 - -

1.000 360 1 11 KN

55~102

1500 60 75 18 20 36 29 99 225 90 100 2.5m 20

..-01100 ..-01100 ..-01100 ..-01100

105~152 ..-01101 ..-01101 ..-01101 ..-01101

156~203 ..-01102 ..-01102 ..-01102 ..-01102

207~254 ..-01103 ..-01103 ..-01103 ..-01103

1.600 420 1 22 KN

74~127

1600 80 100 22 27 39 31 123 290 90 100 2.5m 30

..-01600 ..-01600 ..-01600 ..-01600

127~180 ..-01601 ..-01601 ..-01601 ..-01601

190~243 ..-01602 ..-01602 ..-01602 ..-01602

254~305 ..-01603 ..-01603 ..-01603 ..-01603

2.000 455 1 22 KN

74~127

1600 80 100 22 27 42 34 123 290 90 100 2.5m 36

..-02200 ..-02200 ..-02200 ..-02200

127~180 ..-02201 ..-02201 ..-02201 ..-02201

190~243 ..-02202 ..-02202 ..-02202 ..-02202

254~306 ..-02203 ..-02203 ..-02203 ..-02203

3.200 525 1 33 KN

90~143

2000 100 120 25 35 48 39 144 350 95 100 2.5m 53

..-03300 ..-03300 ..-03300 ..-03300

149~203 ..-03301 ..-03301 ..-03301 ..-03301

203~254 ..-03302 ..-03302 ..-03302 ..-03302

251~305 ..-03303 ..-03303 ..-03303 ..-03303

5.000 690 3 52 KN

106~156

2900 125 150 30 40 56 47 174 425 130 135 2.5m 70

..-05200 ..-05200 ..-05200 ..-05200

160~210 ..-05201 ..-05201 ..-05201 ..-05201

210~260 ..-05202 ..-05202 ..-05202 ..-05202

255~305 ..-05202 ..-05202 ..-05202 ..-05202

10.000 935 3 104 KN fi xed (131 Min) 3500 160 190 35 45 75 68 220 515 135 270 2.5m 175 ..-10401 ..-10401 ..-10401 ..-10401

16.000 1185 5 164 KN fi xed (155 Min)

5500

200 240 50 42 90 81 272 615 155 300 2.5m 305 ..-16401 ..-16401 ..-16401 ..-16401

20.000 1205 6 204 KN fi xed (170 Min) 200 240 50 42 90 81 272 615 155 300 2.5m 415 ..-20401 ..-20401 ..-20401 ..-20401

25.000 1265 8 254 KN fi xed (185 Min) 200 240 50 42 90 81 272 615 160 380 2.5m 495 ..-25401 ..-25401 ..-25401 ..-25401

@ = on request

BASIC / MEDIUM

53

Hoist-Trolley units | Hand driven / Explosion protected

F

F1

LIF

TG

E

AB

C

O

N

nn

R

LTechnical information:



For trolleys : Page 48 / For manual hoist : Page 50/51








52/64 KN = INP450.





internal fast moving hoist parts, extended with

bronze trolley wheels, non sparking top and load

hook and stainless steel non sparking hand chain.

(Reduced capacity)

Optional:



• Temperature class T4 will be observed separately for

each project

Hoist-Trolley units / Hand driven / Standard type (Art. group 83900) ATEX HIGH

Capacity

Kg.

Head

Room

G

No.

off Falls

Trolley

Chassis

Type

Adjustable

beam width

min~max

mm.

R(min).

Radius

Beam

mm.

Dimensions Weight

Kg.

3 mtr

Hoist / trolleyPush (3 mtrs)

ATEX HIGHEX II 2G IIC T3

83920..

Hoist / trolleyGeared (3 mtrs)

ATEX HIGHEX II 2G IIC T3

83925..

Hoist

Loadchain

Lifting height

Price / m €

Hoist & trolley

Handchain

Control height

Price / m €



500 315 1 6 KN55~102

1000 45 60 15 15 30 24 75 185 - - - 11..-00600 -

105~152 ..-00601 -

1.000 360 1 11 KN

55~102

1500 60 75 18 20 36 29 99 225 90 100 2.5m 20

..-01100 ..-01100

105~152 ..-01101 ..-01101

156~203 ..-01102 ..-01102

207~254 ..-01103 ..-01103

1.250 420 1 22 KN

74~127

1600 80 100 22 27 39 31 123 290 90 100 2.5m 30

..-01600 ..-01600

127~180 ..-01601 ..-01601

190~243 ..-01602 ..-01602

254~305 ..-01603 ..-01603

2.000 525 1 33 KN

90~143

2000 100 120 25 35 48 39 144 350 95 100 2.5m 53

..-03300 ..-03300

149~203 ..-03301 ..-03301

203~254 ..-03302 ..-03302

251~305 ..-03303 ..-03303

3.750 690 3 52 KN

106~156

2900 125 150 30 40 56 47 174 425 130 135 2.5m 70

..-05200 ..-05200

160~210 ..-05201 ..-05201

210~260 ..-05202 ..-05202

255~305 ..-05202 ..-05202

6.000 935 3 104 KN fi xed (131 Min) 3500 160 190 35 45 75 68 220 515 135 270 2.5m 175 ..-10401 ..-10401

10.000 1185 5 164 KN fi xed (155 Min)

5500

200 240 50 42 90 81 272 615 155 300 2.5m 305 ..-16401 ..-16401

12.000 1205 6 204 KN fi xed (170 Min) 200 240 50 42 90 81 272 615 155 300 2.5m 415 ..-20401 ..-20401

16.000 1265 8 254 KN fi xed (185 Min) 200 240 50 42 90 81 272 615 160 380 2.5m 495 ..-25401 ..-25401

@ = on request

Basic unit price with electric galvanized load chain and Stainless steel Hand Chain for Hoist & Trolley. : For increased NON SPARKING protection Stainless Steel Loadchain can be used.

HIGH

54

Hoist-Trolley units | Hand driven /









52/64 KN = INP450

Features:

• Capacities 500- 5.000 Kg in low headroom execution

• Suitable for narrow spaces and low headroom

applications




• Trolley manufactured for fi xed beamwidth in different

ranges


















galvanized chains

Hoist-Trolley units / Hand driven / Low headroom / Explosion Protected ATEX BASIC/MEDIUM

Capa-

city

Kg.

Head

Room

G

No.

off

Falls

Trolley

Chassis

Type

Fixed for

beam

width

in range

mm.

DimensionsWeight

Kg.

3 mtr

Hoist / trolley

Push (3 mtrs)

ATEX BASIC

83840

Hoist / trolley

Push (3 mtrs)

ATEX MEDIUM

83850

Hoist / trolley

Geared (3 mtrs)

ATEX BASIC

83845

Hoist / trolley

Geared (3 mtrs)

ATEX BASIC

83855

Hoist

Loadchain

Lifting

height

Price / m €

Hoist & trolley

Handchain

Control height

Price / m €

Overload

Protection

Price €


Art. Nr. Price € Art. Nr. Price € Art. Nr. Price € Art. Nr. Price €

500 210 1 6 KN 55-300 45 60 15 15 30 24 75 33 285 - - - - 12 ..-00600 ..-00600 - -

1.000 245 1 11 KN 55-300 60 75 18 20 36 29 99 42 345 65 90 100 2.5m 22 ..-01100 ..-01100 ..-01100 ..-01100

2.000 455 1 22 KN 74-300 80 100 22 27 42 34 123 49 430 65 90 100 2.5m 40 ..-02200 ..-02200 ..-02200 ..-02200

3.200 370 1 33 KN 90-300 100 120 25 35 48 39 144 59 505 70 95 100 2.5m 60 ..-03300 ..-03300 ..-03300 ..-03300

5.000 475 3 52 KN 106-300 125 150 30 40 56 47 174 65 640 100 130 135 2.5m 75 ..-05200 ..-05200 ..-05200 ..-05200


OB A

E

N

LIF

TG

C

F1

F

M

T

n

R

L

BASIC / MEDIUM

55

Low headroom / Explosion protected









52/64 KN = INP450








(Reduced capacity)

Optional:




each project

Hoist-Trolley units / Hand driven / Low headroom / Explosion Protected ATEX HIGH

Capacity

Kg.

Head

Room

G

No.

off

Falls

Trolley

Chassis

Type

Fixed for

beam

width

in range

mm.

DimensionsWeight

Kg.

3 mtr

Hoist / trolley

Push (3 mtrs)

ATEX HIGH

83940

Hoist / trolley

Geared (3 mtrs)

ATEX HIGH

83945

Hoist

Loadchain

Lifting height

Price / m €

Hoist & trolley

Handchain

Control height

Price / m €

Overload

Protection

Price €



500 210 1 6 KN 55-300 45 60 15 15 30 24 75 33 285 - - - - 12 ..-00600 -

1.000 245 1 11 KN 55-300 60 75 18 20 36 29 99 42 345 65 90 100 2.5m 22 ..-01100 ..-01100

1.250 315 1 22 KN 74-300 80 100 22 27 42 34 123 49 430 65 90 100 2.5m 40 ..-02200 ..-02200

2.000 370 1 33 KN 90-300 100 120 25 35 48 39 144 59 505 70 95 100 2.5m 60 ..-03300 ..-03300

3.750 475 3 52 KN 106-300 125 150 30 40 56 47 174 65 640 100 130 135 2.5m 75 ..-05200 ..-05200


OB A

E

N

LIF

TG

C

F1

F

M

T

n

R

L

HIGH

56

Hoist-Trolley units | Hand driven / Ultra low headroom / EX.

E

U N

L

Rn

O

GLI

FT

F

F1

AB

C







Features:

• Low in weight, Ultra Low headroom

• Complete unit with standard surface treatment, 2

layer Alkyd paint 80 μm, orange colour RAL2008













galvanized chains








(Reduced capacity)


each project

Optional:





• Stainless Steel load chain, available

on request (reduced capacity)

Hoist-Trolley units / Hand driven / Low headroom / Explosion Protected

ATEX BASIC / MEDIUM ATEX HIGH

Capa-

city

ATEX

BASIC

/ME-

DIUM

Kg.

Head

Room

G

mm.

No.

off

Falls

Trolley

Chassis

Type

Fixed

beam

width

in range

mm.

Dimensions Weight

Kg.

3 mtr

Hoist / trolley

Geared (3 mtrs)

ATEX BASIC

83860

Hoist / trolley

Geared (3 mtrs)

ATEX MEDIUM

83865

Hoist

Loadchain

Lifting height

B/M

Price / m €

Hoist & trolley

Handchain

Control height

B/M

Price / m €

Capacity

ATEX

HIGH

Kg.

Hoist / trolley

Geared (3 mtrs)

ATEX HIGH

83960

Hoist

Loadchain

lifting

height

HIGH

Price / m €

Hoist &

trolley

Handchain

Control

height

HIGH

Price / m €

Overload

Protec-

tion

Price €

A B C E F F1 R L N U O n

Art. Nr. Price € Art. Nr. Price € Art. Nr. Price €

1.000 125 2 22 KN 74-300 80 100 22 20 36 29 226 500 140 105 100 2.5m 40 ..-01100 ..-01100 1.000 ..-01100

2.000 150 2 33 KN 90-300 100 120 25 20 42 34 266 600 145 150 135 2.5m 120 ..-02200 ..-02200 2.000 ..-02200

3.200 170 2 52 KN 106-300 125 150 30 26 48 39 310 685 175 150 135 2.5m 150 ..-03300 ..-03300 2.500 ..-03300

6.000 285 2 84 KN 119-300 160 190 35 33 75 68 430 965 225 200 300 2.5m 300 ..-05200 ..-05200 4.000 ..-05200


57

Cranes | Hand operated / Under slung crane / EX.

Detail: Y

Detail: X

Y

X

S+500

M

S

H

BA

2

LR

B+4mm










motions.

3) Maximum INP Gantry for: ø 80/100S

= INP 360, ø 125/150S = INP 450

Features:

• Van Leusden under slung cranes are available as com-

plete cranes as well as crane kits for self-construction.

• Explosion protected model in Basic/Medium

execution suitable up till Ex Class Ex II 2 G IIB T3

(Zone 1&2) Non Sparking protection of fast moving

mechanical contact parts and rubber buffers on crane





sparking protection of crane wheels and hand chains

• The suspended under slung cranes are executed with

solid material single fl ange wheels, suitable for all

kinds of crane gantries.



• The cranes delivered complete with

• Manual geared drive

• Control height 3 m, control chain

• Surface protection Shot blasting + primer + top coat

in RAL1007

• S.W.L. Sticker

• Users manual

• Crane kits for crane-constructors:

• A complete set of wheel boxes, with transversal shaft,

bearing blocks, hand chain wheel, hand chain, accom -

panied by a dimensional sketch. Shot blasted + primer

• Basic welding execution, Crane girder to be welded

to the wheelboxes

• Crane girder to be provided by crane-constructor.

Optional:



headroom types

• Special executions as low headroom etc.



catalogue pages

Cranes / Hand operated / Underslung crane / Explosion protected (Art. group 86000) ATEX BASIC/MEDIUM/HIGH

S.W.L.

Kg.

S

m1) 2)

R

mm

L

mm

Wheels

mm

A2

mm

Max. Weight.

Hoist+Trolley

Kg.

Max.

Wheelbox

load

KN

Handchain

Force

Kg.

Crane

86210..

Art. Nr.

Price Crane Excl.

Hoist/Trolley

BASIC / MEDIUM

Ex II 2G IIB T3

Price €

Price Crane Excl.

Hoist/Trolley

HIGH

Ex II 2G IIC T3

Price €

Crane Kit

86260..

Art.Nr.

Crane Kit

BASIC / MEDIUM

Ex II 2G IIB T3

Price €

Crane Kit

HIGH

Ex II 2G IIC T3

Price €

Screw Fittings

Boltset

incl.

Price €

500

- 4.10 (- 3.70) 800 1005 80/100S 150

100

7.0 10 ..05001 ..05001

- 5.25 (- 4.75) 800 1005 80/100S 170 7.6 10 ..05002 ..05002

- 6.75 (- 6.00) 800 1005 80/100S 190 7.7 10 ..05003 ..05003

- 8.25 (- 7.40) 1000 1205 80/100S 210 8.1 11 ..05004 ..05004

1.000

- 3.95 (- 3.55) 800 1005 80/100S 170

105

12.3 15 ..10001 ..10001

- 5.00 (- 4.50) 800 1005 80/100S 190 12.4 15 ..10002 ..10002

- 6.00 (- 5.50) 800 1005 80/100S 210 12.5 15 ..10003 ..10003

- 7.50 (- 6.70) 1000 1205 80/100S 230 13.2 17 ..10004 ..10004

- 9.10 (- 8.10) 1200 1405 80/100S 250 14.1 20 ..10005 ..10005

2.000

- 3.40 (- 3.10) 800 1005 80/100S 170

150

22.3 19 ..20001 ..20001

- 5.75 (- 5.75) 800 1005 80/100S 250 23.4 21 ..20002 ..20002

- 7.75 (- 7.00) 1000 1205 80/100S 270 24.4 23 ..20003 ..20003

- 9.10 (- 8.10) 1200 1405 80/100S 290 25.6 24 ..20004 ..20004

3.200

- 5.50 (- 4.90) 800 1075 125/105S 230

175

33.8 21 ..32001 ..32001

- 6.50 (- 5.90) 1000 1275 125/105S 250 34.7 23 ..32002 ..32002

- 9.50 (- 8.80) 1400 1675 125/105S 330 36.8 25 ..32003 ..32003

- 11.00 (- 9.90) 1400 1675 125/105S 350 38.0 27 ..32004 ..32004

5.000

- 5.00 (- 5.00) 800 1075 125/150S 270

225

54.3 26 ..50001 ..50001

- 6.25 (- 6.25) 800 1075 125/150S 290 55.4 27 ..50002 ..50002

- 9.20 (- 9.20) 1200 1475 125/150S 390 58.1 30 ..50003 ..50003

58

Hoist-Trolley units | Hand operated / Overhead crane / EX.

X-XX

X

M

S+150

S

W

V

LR

A

B

H

B1

B2

A1

H

A2










motions.

3) Changes in dimensions or prices

possible without pre-notice.

4) Specify A or B type crane with order.

Features:

• Van Leusden overhead cranes are available as complete

cranes and as crane kits for self-construction

• Explosion protected model in Basic/Medium

execution suitable up till Ex Class Ex II 2 G IIB T3 (Zone

1&2) Non Sparking protection of fast moving

mechanical contact parts and rubber buffers on crane





sparking protection of crane wheels and hand chains

• The overhead cranes are executed with solid material

double fl ange wheels, suitable for fl at rails 50/30 mm



• The cranes delivered complete with:

• Manual geared drive

• Control height 3 m, control chain

• Surface protection Shot blasting + primer + top coat

in RAL1007

• S.W.L. Sticker

• Users manual

• Crane kits for crane-constructors:

• A complete set of wheel boxes, with transversal shaft,

bearing blocks, hand chain wheel, hand chain,

accompanied by a dimensional sketch. Shot blasted +

primer

• Basic welding execution, Crane girder to be welded to

the wheelboxes

• Crane girder to be provided by crane-constructor.

Optional:



headroom types

• Special executions as low headroom etc.



catalogue pages

Cranes / Hand operated / Underslung crane / Explosion protected (Art. group 86000) ATEX BASIC/MEDIUM/HIGH

S.W.L.

Kg.

S

m1) 2)

R

mm

L

mm

Wheels

mm

A1

mm

A2

mm

B1

mm

B2

mm

Max. Weight.

Hoist+Trolley

Kg.

Max.

Wheelbox

load

[kN]

Handchain

Force

Kg.

Crane

86110..

Art. Nr.

Price Crane Excl.

Hoist/Trolley

BASIC/ MEDIUM

Ex II 2G IIB T3

Price €

Price Crane Excl.

Hoist/Trolley

HIGH Ex II 2G IIC T3

Price €

Crane Kit

86160..

Art.Nr.

Crane Kit

BASIC/ MEDIUM

Ex II 2G IIB T3

Price €

Crane Kit

HIGH

Ex II 2G IIC T3

Price €

Screw

Fittings

Boltset

incl.

Price €

500

- 4.10 (- 3.70) 800 1090 125/150 196 21 346 171

100

3.4 10 ..05001 ..05001

- 5.25 (- 4.75) 800 1090 125/150 196 21 346 171 3.8 10 ..05002 ..05002

- 6.75 (- 6.00) 800 1090 125/150 215 22 365 172 3.9 10 ..05003 ..05003

- 8.25 (- 7.40) 1000 1290 125/150 234 22 384 172 4.0 11 ..05004 ..05004

1.000

- 3.95 (- 3.55) 800 1090 125/150 215 22 365 172

105

6.0 15 ..10001 ..10001

- 5.00 (- 4.50) 800 1090 125/150 215 22 365 172 6.1 15 ..10002 ..10002

- 6.00 (- 5.50) 800 1090 125/150 234 22 384 172 6.3 15 ..10003 ..10003

- 7.50 (- 6.70) 1000 1290 125/150 253 23 403 173 6.5 17 ..10004 ..10004

- 9.10 (- 8.10) 1200 1490 125/150 273 24 423 174 6.9 20 ..10005 ..10005

2.000

- 3.40 (- 3.10) 800 1090 125/150 203 25 353 175

150

11.1 19 ..20001 ..20001

- 5.75 (- 5.75) 800 1090 125/150 273 24 423 174 11.5 21 ..20002 ..20002

- 7.75 (- 7.00) 1000 1290 125/150 293 25 443 175 12.0 23 ..20003 ..20003

- 9.10 (- 8.10) 1200 1490 125/150 313 25 463 178 12.6 24 ..20004 ..20004

3.200

- 5.50 (- 4.90) 800 1090 125/150 263 28 413 178

175

16.8 21 ..32001 ..32001

- 6.50 (- 5.90) 1000 1290 125/150 283 29 433 179 17.2 23 ..32002 ..32002

- 9.50 (- 8.80) 1400 1690 125/105 353 27 503 177 18.2 25 ..32003 ..32003

- 11.00 (- 9.90) 1400 1690 125/105 373 28 523 178 18.8 27 ..32004 ..32004

5.000

- 5.00 (- 5.00) 800 1130 160/180 305 32 505 232

225

27.1 26 ..50001 ..50001

- 6.25 (- 6.25) 800 1130 160/180 325 33 525 233 27.5 27 ..50002 ..50002

- 9.20 (- 9.20) 1200 1530 160/180 415 33 615 233 29.9 30 ..50003 ..50003

59

AIR HOISTS

Proven in practice : Air Hoists PROFI series are superior in all places where safety has

priority. Unlike electric current, the compressed air power driving medium does not

produce any ignition risk. This important advantage ensures Air Hoists PROFI are es-

pecially suitable for applications in hazardous areas.

For the last decades we have been cooperating in installing the PROFI air hoists in dif-

ferent markets, with great success.

Air Hoists PROFI series are very robust and therefore suitable for tough industrial as

well as offshore and maritime applications. Even conditions of continuous working pro-

cesses are no problem for these hoists. Various control systems are available. For mo-

ving the loads in horizontal direction we can provide you with a range of standard as

well as special drive systems with trolleys. All to meet you specifi c demands..

Air Hoists PROFI series are excellent and have proven their abilities is many markets :

Chemical industries, Oil and Gas plants Offshore and On Shore, Paint shops, Power

plants, Refi neries, Shipyards, etc., etc..

We have selected the best ranges of products that can be combined and comple-

mented with our own range of products. All kinds of special solutions are available on

request.

Proven in practice

60


Explosion Classifi cation ATEX 94/9/EEC:

1) Standard: EX II 2GD IIA T4(X) / EX II

3GD IIB T4(X)

2) With increased spark protection: EX II

GD IIC T4(X)

Features:

• Capacities 250 Kg – 100.000 Kg

• Air Pressure 4 Bar or 6 Bar

• Suitable for application in Hazardous areas

• Sensitive infi nitely variable speed control for the precise

positioning of loads

• Easy operation

• Suitable for lube free operation

• Frequent switching and extended duty cycles

• Fail safe starting, low maintenance vane motor

• Planetary gearbox with high grade steel gears

• Low maintenance

• Low headroom, Light Weight

• Insensitive to dust, humidity and temperatures ranging

from -20°C…+70°C

• From 1 ton upwards with overload protection

• Low sound emissions

Optional:

• Different options of control, cord control, pendant

control, E-type robust control.

• Air service units, Filter, Regulator

• Chain box

• Offshore coating

• Testing

• Spark resistant packages

Air Hoist | Profi TI / Heavy Duty

Air Hoists PROFI TI

Type 025 TI 05 TI 1 TI 2 TI 3 TI 6 TI 10 TI 16TI 20 TI 25 TI 37 TI 50 TI 100 TI

Air pressure bar 4 6 4 6 4 6 4 6 4 6 4 6 4 6 4 6 4 6 6 4 6 4 6 6

Carrying capacity t 0,16 0,25 0,32 0,5 0,63 1 1,25 2 3,2 6,3 10 16 20 25 37,5 50 100

Number of chain strands 1 1 1 2 1 2 2 3 4 2 3 4 4

Engine output kW 0,6 1 0,6 1 0,6 1 0,6 1 1,8 1,8 1,8 1,8 1,8 3,5 6 4 6 4 6 10

Lifting speed at full load m/min 20 10 5 2,5 2,5 1,2 0,8 0,5 0,4 0,7 1,1 0,4 0,65 0,3 0,45 0,35

Lifting speed without load m/min 37,5 42 16 19 10 11 5 5,5 6 3 2 1,3 1 1,4 2,3 1,1 1,6 0,7 1,3 0,7

Lowering speed at full load m/min 38 17 10 5 7,5 3,6 2,5 1,6 1,2 1,6 1,9 1 1,5 0,9 1,4 0,8

Air consumption at full load - Lifting m³/min 0,7 1,2 0,7 1,2 0,7 1,2 0,7 1,2 2 2 2 2 2 4 5,5 4,7 5,5 4,7 5,5 11

Air consumption at full load - Lowering m³/min 0,8 0,8 0,8 0,8 3,5 3,5 3,5 3,5 3,5 6,5 5,5 6,5 5,6 12

Air connection G ½ G ½ G ½ G ½ G ¾ G ¾ G ¾ G ¾ G ¾ G 1 G 1 G 1 G 1½

Hose dimension (Ø inside) mm 13 13 13 13 19/31 19/31 19/31 19/31 19/31 25/39 25/39 25/39 35/51

Weight at standard lift, rope control Kg 27 27 27 27 27,5 28² 34² 34² 86 110 156 240 285 498 880 855 2640

Chain dimension mm 7 x 21 7 x 21 7 x 21 7 x 21 13 x 36 13 x 36 16 x 45 16 x 45 16 x 45 23,5 x 66 23,5 x 66 23,5 x 66 32 x 90

Weight of 1 m chain Kg 1 1 1 1 3,8 3,8 5,8 5,8 5,8 12,2 12,2 12,2 21,3

Standard lift m 3 3 3 3 3 3 3 3 3 3 3 3 3

Length of control at standard lift m 2 2 2 2 2 2 2 2 2 2 2 2 2

Sound level at full load¹ - lifting dB(A) 73 74 74 74 74 74 74 74 74 83 77 77 88

Sound level at full load¹ - lowering dB(A) 77 77 77 77 79 79 79 79 79 83 79 79 89

Dimension in mm 025 TI 05 TI 1 TI 2 TI 3 TI 6 TI 10 TI 16 TI 20 TI 25 TI 37 TI 50 TI 100 TI

A smallest headroom * 450 450 450 498 593 674 813 898 1030 1260 1400 1700 2200

B 288 288 288 336 373 454 548 598 670 827 869 1144 1475

C 145 145 145 145 233 233 308 382 382 377 377 463 734

D 297 297 297 297 483 483 575 692 692 812 812 980 1505

E1 28 28 28 28 40 40 44 53 75 75 100 100 120

E2 28 28 28 28 30 40 44 53 75 75 100 100 120

F up to hook center 137 137 137 137 187 154 197 199 180 318 518 310 440

G biggest width 176 176 176 183 233 233 306 308 315 488 745 539 767

* Chain containers increase the headroom.

¹ measured in 1 m distance acc. to DIN 45635 part 20

² with overload protection

025TI_2TI 3TI_50TI

61


Explosion Classifi cation ATEX 94/9 EEC:


3GD IIB T4(X)

2) With increased spark protection: EX II

GD IIC T4(X)

Air Hoist | Profi TI / Trolley-Hoist combinations / Heavy Duty

Features:


• Trolley/Hoist units in Manual, Push driven excellent

combination with HD3C trolley, see page 8 or other

applicable pages.

• Motor driven trolleys in standard geared motors or

with Rack and pinion drive systems.

• Air Pressure 4 Bar or 6 Bar


• Sensitive infi nitely variable speed control for the

precise positioning of loads

• Easy operation

• Suitable for lube free operation




• Low maintenance


• Sound absorption


from -20°C…+70°C

• From 1 ton upwards with overload protection


Optional:

• Curved beams, curved toothrack beams.




• Chain box


• Testing


• Power supply systems by Spiral hose, energy chain or

c_rails with hose trolleys.

Air Hoists with Trolley PROFI TI

Type 025 TI 05 TI 1 TI 2 TI 3 TI 6 TI 10 TI 16 TI 20 TI

Carrying capacity of trolley LH and LM t 2 3,2 6,3 10 - 16 20

Carrying capacity of hoist with trolley t 0,25 0,5 1 2 3,2 6,3 10 16 20

Weight of Motor Trolley Kg 26 33 124 190 260

Weight of hoist with standard lift Kg 27 27 28 34 86 110 156 240 285

Total weight with standard lift of Motor Trolley Kg 53 53 54 60 119 234 346 430 545

Weight of 1 m chain Kg 1 3,8 5,8

Chain acc. DIN 5684-8 mm 7x 21 13x 36 16 x 45

Number of falls 1 2 1 2 2 3 4

Air pressure Motor Trolley bar 6

Air consumption Motor Trolley at nominal load m³/min 0,6 1,3

Air consumption of hoist at nominal load m³/min 1,5 5,5

Motor raiting Motor Trolley kW 0,2 0,7

Motor raiting hoist kW 1 3,5

Travelling speed of Motor Trolley at nominal load m/min 9*/14 5*/12

Hose connection Motor Trolley G 1/2 G ¾

Max. bottom fl ange thickness t Trolley mm 40 65

Max. bottom fl ange width b Trolley mm 280 310

Min. bottom fl ange width b Trolley mm 50 54 125 148

Sound level Motor Trolley ³ dB (A) 80

Type mm 025 TI 05 TI 1 TI 2 TI 3TI 6TI 10 TI 16 TI 20 TI

in Trolley mm LM 2 t LM 3,2 t LM6,3 t LM 10-16 t LM 20 t

A mm 250 292 500 490 490 600

Bmax. mm 130 113 141 146 146 155

C mm b + 36 b+60 b+70 b+68

d mm 70 84 165 165 165 185

D mm 185 191 205 318 318 328

E mm 137 187 154 197 199 180

F mm 39 79 109 109 135

G mm 145 233 233 308 382 382

H mm 152 250 250 267 310 310

J* min. headroom* mounted mm - 635 763 944 997 1140

J* suspended mm 563 798 919 1131 1216 1490

K mm 95 107 215 215 28 218

L mm 28 30 40 42 55 75

M mm 42 42 51 66 82 86

N mm 116 136 236 236 236 274

62


EH Monorail hoists are available with

air and hydraulic drive for the offshore

industry or wherever heavy loads

have to be moved in reduced spaces.

Depending on the application the

monorail hoist can be used in tandem

operation. For example in BOP

systems Third party acceptance by

DNV, ABS or Lloyd’s available on

request. Explosion Classifi cation ATEX

94/9/EEC:


3GD IIB T4(X)

2) With increased spark protection:

EX II GD IIC T4(X)

Features:


• Motor driven trolleys in standard geared motors or with

Rack and pinion drive systems.


• Sensitive infi nitely variable speed control for the precise

positioning of loads






from -20°C…+70°C


Optional:




• Chain box


• Testing




Air Hoist | Profi EH / Monorail Air Hoist Units / Heavy Duty

Monorail Air Hoist Units PROFI EH

Type EH 10 EH 16 EH 20 EH 25 EH 37 EH 50 EH 75 EH100

Carrying capacity t 10 16 20 25 37,5 50 75 100

Number of chain strands 2 3 4 2 3 4 3 4

Motor output Trolley kW 0,7 0,7 0,7 1,4 1,4 1,4 2,8 2,8

Motor output Hoist kW 3,5 3,5 3,5 6 6 6 10 10

Air pressure bar 6 6 6 6 6 6 6 6

Lifting speed at full load m/min 1,6 1 0,7 1,1 0,65 0,5 0,45 0,35

Lifting speed without load m/min 3,2 2 1,4 2,3 1,6 1,1 0,85 0,65

Lowering speed at full load m/min 3,4 2,1 1,6 1,9 1,5 0,9 1 0,75

Travelling speed at full load m/min 12 12 12 12 12 12 12 12

Travelling speed without load m/min 13,5 13,5 13,5 13,5 13,5 13,5 13,5 13,5

Air consumption Trolley m³/min 1,3 1,3 1,3 2,6 2,6 2,6 5,2 5,2

Air consumption Hoist m³/min 3,2 3,2 4 5,5 5,5 5,5 11 11

Air connection G_3/4 G_3/4 G_3/4 G 1_1/2 G 1_1/2 G 1_1/2 G 1_1/2 G 1_1/2

Hose dimension (Ø inside /Ø outside) mm 19/31 19/31 19/31 25/39 25/39 25/39 35/51 35/51

Weight with standard lift Kg 450 575 620 950 1450 1780 4000 5700

Chain dimension mm 16 x 45 16 x 45 16 x 45 23,5 x 66 23,5 x 66 23,5 x 66 32 x 90 32 x 90

Weight of 1 m chain Kg 5,8 5,8 5,8 12,2 12,2 12,2 21,3 21,3

Standard lift m 3 3 3 3 3 3 3 3

Length of control at standard lift m 2 2 2 2 2 2 2 2

Sound level at full load_ with standard silencer - lifting dB(A) 78 78 80 83 83 83 88 88

Sound level at full load_ with standard silencer - lowering dB(A) 80 80 84 83 83 83 89 89

Type EH 10 EH 16 EH 20 EH 25 EH 37 EH 50 EH 75 EH100

A max. mm 105 130 130 146 100 125 100 125

B mm 70 68 68 70 68 68 68 68

C mm 285 295 295 285 295 300 295 300

D mm 25 35 35 25 35 40 35 40

E mm 198 220 220 198 220 283 220 283

F* mm 705 750 820 998 1070 1150 1480 1535

G mm 138 213 202 170 190 420 286 575

H mm 44 53 75 75 100 100 120 120

J mm 192 185 266 350 455 340 740 470

K mm 580 600 600 1185 1730 1680 3210 3130

L mm 308 367 367 377 377 462 640 762

M mm 266 325 325 435 435 560 655 750

63

Air Hoist | Profi UH / Ultra low Monorail Hoists / Heavy Duty


Where Load have to be lifted and

transported in extremely reduced

spaces the PROFI Ultra low Monorail

Hoists provide the ideal solution.

Explosion Classifi cation ATEX 94/9/

EEC:

1) Standard: EX II 2GD IIA T4(X) / EX

II 3GD IIB T4(X)

2) With increased spark protection:

EX II GD IIC T4(X)

Features:

• Capacities 250 Kg - 16.000 Kg

• Motor driven trolleys in standard geared motors or

with Rack and pinion drive systems.


• Sensitive infi nitely variable speed control for the

precise positioning of loads






from -20°C…+70°C


Optional:




• Chain box


• Testing




Ultra Low Headroom Monorail Air Hoist untis PROFI UH

Type UH 4 UH 6 UH 8 UH 12 UH 16 Dimensions

Carrying capacity t 4 6 8 12 16 A mm 195 305 195 305 305

Number of chain strands 2 2 4 4 4 B mm 200 200 200 200 200

Engine output kW 2,5 2,5 2,5 2,5 2,5 C mm 284 284 284 284 284

Air pressure bar 6 6 6 6 6 D mm 165 165 165 165 165

Lifting speed at full load m/min 3 2 1,4 0,9 0,65 E mm 236 236 236 236 236

Lifting speed without load m/min 6 4,5 2,9 2,2 1,2 F mm 330 330 283 283 283

Lowering speed at full load m/min 7,5 5,2 3,6 2,5 1,5 G mm 197,5 197,5 197,5 197,5 197,5

Air consumption Lifting -full load- m³/min 4 4 4 4 4 H min, 150 <=b <=310 mm 230 230

Air consumption Lowering -full load- m³/min 5,5 5,5 5,5 5,5 5,5 H min, 150 <=b <=230 mm - -

Air connection G ¾ G ¾ G ¾ G ¾ G ¾ H min, 230 <=b <=310 mm 276 276 315

Hose dimension (Ø inside /

Ø outside)mm 19/31 19/31 19/31 19/31 19/31 J mm 400 400 400 400 400

Weight at standard lift without

controlKg 460 470 540 550 560 K mm 535 535 535 535 535

Chain dimension mm 13 x 36 13 x 36 13 x 36 13 x 36 13 x 36 L mm 1000 1000 1000 1000 1000

Weight of 1 m chain Kg 3,8 3,8 3,8 3,8 3,8 M mm 40 40 44 44 53

Standard lift m 3 3 3 3 3 N mm 51 51 66 66 82

Lenght of control at standard lift m 2 2 2 2 2

64

Table for beamchoice for trolleys with handchainhoists. Acc. to DIN 120 Group 1, incl.

underfl ange defl ection DIN 4114.

For electr./air hoists choose one size bigger.

Beamchoice

Profi l 0.5 1 2 3.2 5 6.3 8 10 12.5 16 h b t

120 3.4 2.2 120 58 7.7

140 4.6 3.2 140 66 8.6

160 5.9 4.2 1.3 160 74 9.5

180 7.0 5.2 2.5 180 82 10.4

200 8.2 6.3 3.7 1.6 200 90 11.3

220 9.2 7.2 5.1 2.7 220 98 12.2

240 8.4 6.2 3.8 1.2 240 106 13.1

260 9.4 7.1 5.2 2.0 1.2 260 113 14.1

280 10.5 8.1 6.6 3.0 2.0 1.0 280 119 15.2

300 11.4 8.9 7.4 4.0 2.8 1.8 300 125 16.2

320 9.7 8.4 5.2 3.9 2.5 1.1 320 131 17.3

340 10.8 9.2 6.5 5.0 3.3 1.7 340 137 18.3

360 11.7 10.1 7.9 6.4 4.4 2.4 1.0 360 143 19.5

380 11.8 8.7 7.7 5.5 3.2 2.0 380 149 20.5

400 9.5 8.7 6.7 4.1 3.1 1.8 400 155 21.6

450 11.7 10.9 9.8 6.8 4.9 3.1 450 170 24.3

500 11.8 10.1 7.8 5.5 500 185 27.0

550 12.8 11.6 10.0 8.2 550 200 30.0

600 14.8 13.0 11.2 600 215 32.4

Profi l 0.5 1 2 3.2 5 6.3 8 10 12.5 16 h b t

100 2.2 0.5 100 55 5.7

120 3.4 1.0 120 64 6.3

140 4.4 2.1 140 73 6.9

160 5.6 3.3 160 82 7.4

180 6.7 4.9 1.1 180 91 8.0

200 7.7 5.9 1.8 200 100 8.5

220 8.8 6.9 3.1 220 110 9.2

240 9.9 8.0 4.5 1.6 240 120 9.8

270 11.3 9.2 6.3 2.6 270 135 10.2

300 12.5 10.5 8.3 4.0 300 150 10.7

330 11.8 9.4 6.0 330 160 11.5

360 10.6 9.0 2.9 360 170 12.7

400 11.8 10.3 4.6 2.7 400 180 13.5

450 11.5 7.5 5.0 2.2 450 190 14.6

500 10.8 8.0 4.7 1.1 500 200 16.0

550 11.2 7.4 2.9 550 210 17.2

600 11.2 6.0 600 220 19.0

Profi l 0.5 1 2 3.2 5 6.3 8 10 12.5 16 h b t

100 2.9 1.6 100 100 10.0

120 5.2 3.5 120 120 11.0

140 7.4 5.3 2.1 140 140 12.0

160 9.5 6.8 3.7 0.8 160 160 13.0

180 11.8 8.5 5.8 2.2 180 180 14.0

200 10.3 7.3 4.8 200 200 15.0

220 8.7 6.0 0.9 220 220 16.0

240 10.2 8.3 2.1 240 240 17.0

260 11.7 9.7 3.0 1.1 260 260 17.5

280 11.0 4.2 2.2 280 280 18.0

300 6.3 3.5 1.0 300 300 19.0

320 8.8 5.9 2.5 320 300 20.5

340 10.6 7.7 4.0 340 300 21.5

360 9.2 5.4 1.0 360 300 22.5

400 11.0 8.1 3.2 1.2 400 300 24.0

450 11.6 6.0 3.2 450 300 26.0

500 9.2 5.5 1.7 500 300 28.0

550 11.4 7.3 3.2 550 300 29.0

600 9.3 4.8 600 300 30.0

650 11.2 6.5 650 300 31.0

700 8.6 700 300 32.0

800 11.4 800 300 33.0

900 14.6 900 300 35.0

1000 17.4 1000 300 36.0

65

Sales Conditions

Delivery time

Delivery

Prices

Additional costs

administration.

Payments placement.

Claims

Returning goods

Disclaimer

Courtesy

Photography

Concept and design

TERMS OF DELIVERY

All our quotations, all orders placed with us and all contracts concluded with us, are

subject to the METAALUNIE CONDITIONS, as they read according to the text printed on

the last page of this catalogue. Upon request, the conditions of delivery and payment

will be sent to you for free as well.

Delivery time will be specifi ed by our sales department.

All our orders will be delivered EXW Incoterms 2000.

We shall specify the transport costs on our order confi rmation in advance,

if possible.

In Euro, (€), Excl. VAT. Price changes and printing errors are prohibited.

For orders < € 100,00 we will charge € 20,00 nett for handling and administration.

Payment schedules to be agreed with our sales department before order.

Within 14 days after receipt of the goods according to our Sales Conditions as

mentioned above.

Will be accepted on your notice and after our approval. Shipment to us will be CPT. Any

returning of goods caused by failure in ordering or missing information will be charged

with 10% returning costs.

All the products in this catalogue are subject to changes due to further

developments, improvements and innovation.

We reserve the right to modify, change or withdraw any data as printed in this

catalogue.

Liability for errors and printing errors shall not be accepted.

The prices and or deliveries for products from this catalogue are subject to the delivery

terms as printed on the last pages of this catalogue.

Photography courtesy of Bluewater International.

Stef Verstraaten

Puntkomma Nijmegen

66

Article 1: Applicability

1.1. These Terms & Conditions apply to all tenders issued by members of Koninklijke Metaalunie, to all agreements con-cluded by those members and to all agreements that may re-sult therefrom.

1.2. The tendering party/supplier is the Metaalunie member apply-ing these Terms & Conditions, and is referred to as ‘the Sup-plier’. The counterparty is referred to as ‘the Client’.

1.3. In the event of any conflicts between the substance of the agreement concluded between the Client and the Supplier on the one hand and these Terms & Conditions on the other, the provisions set out in the agreement have precedence.

1.4. These Terms & Conditions may only be used by members of Koninklijke Metaalunie.

Article 2: Tenders

2.1. No obligations are attached to any tenders.

2.2. If the Client supplies the Supplier with data, drawings etc., the Supplier may rely on their accuracy and shall base the tender on that information.

2.3. All prices specified in the tender are based on delivery ex works, in accordance with the Incoterms 2000. Prices are stated exclusive of VAT and packing materials.

2.4. If the tender is not accepted, the Supplier is entitled to charge the Client for all costs incurred in order to submit the tender.

Article 3: Intellectual property rights

3.1. Unless agreed otherwise in writing, the Supplier retains the copyrights and all industrial property rights to all tenders, de-signed submitted, illustrations, drawings, trial models, pro-grams, etc.

3.2. The rights listed in Article 3.1 remain the property of the Sup-plier, regardless of whether costs have been charged to the Client for their production. The relevant information may not be copied, used or shown to third parties without the Sup-plier’s explicit prior consent. The Client will be liable to pay the Supplier a penalty for each instance of violation of this provision, to the amount of €25,000. This penalty may be de-manded in addition to any compensation damages awarded by law.

3.3. The Client must return all data provided as meant in Arti-cle 3.1 on demand, within the period specified by the Sup-plier. If this provision is violated, the Client is liable to pay the Supplier a penalty of €1,000 per day. This penalty may be demanded in addition to any compensation damages awarded by law.

Article 4: Advice, designs and materials

4.1. The Client cannot derive any rights from advice or information provided by the Supplier that has no direct bearing on the en-gagement.

4.2. The Client is responsible for all drawings, calculations and designs made by or on behalf of the Client, and for the func-tional suitability of all materials prescribed by or on behalf of the Client.

4.3. The Client indemnifies the Supplier for any claims from third parties arising in connection with the use of the drawings, cal-culations, designs, materials, samples, models, etc. provided by or on behalf of the Client.

4.4. The Client may examine (or arrange for the examination of) the materials that the Supplier intends to use before they are processed, at the Client’s own expense. Any damages in-curred by the Supplier as a result are for the Client’s expense.

Article 5: Delivery times

5.1. The delivery deadline and/or work period stated by the Sup-plier are estimates.

5.2. In determining delivery deadlines and/or work periods, the Supplier assumes that the engagement can be carried out under the circumstances as they are known to the Supplier at that moment.

5.3. Delivery deadlines and/or work periods do not commence until the Parties have agreed on all commercial and technical details, all necessary data, final and approved drawings, etc. are in the Supplier’s possession, the payment or instalment agreed has been received and the conditions necessary for the performance of the engagement have been met.

5.4. a. In the event of circumstances that are different to those known to the Supplier when the delivery deadline and/or work period were determined, the Supplier may extend the delivery deadline and/or work period by the time that is re-quired in order to perform the engagement under those cir-cumstances. If the work cannot be fitted into the Supplier’s work schedule, it will be carried out as soon as the Sup-plier’s schedule permits.

b. In the event of contract extras, the delivery deadline and/or work period will be extended by the time required to supply (or arrange for the supply of) the materials and parts nec-essary for those contract extras and to carry out the con-tract extras. If the contract extras cannot be fitted into the Supplier’s work schedule, they will be carried out as soon as the Supplier’s schedule permits.

c. In the event that the Supplier’s obligations are suspended, the delivery deadline and/or work period will be extended by the duration that the obligations are suspended. If re-sumption of the work cannot be fitted into the Supplier’s work schedule, the work will be carried out as soon as the Supplier’s schedule permits.

d. In the event of weather conditions that prevent work being carried out, the delivery deadline and/or work period will be extended by the resulting delay.

5.5. If the delivery deadline and/or work period agreed is ex-ceeded, that circumstance does not in any instance entitle the Client to compensation for damages, unless agreed in writing.

Article 6: Transfer of risk

6.1. Deliveries are made ex works, in accordance with the Inco-terms 2000; the risks attached to the object are transferred at the moment that the Supplier makes the object available to the Client.

6.2. The provisions of Article 6.1 notwithstanding, the Client and the Supplier may agree that the Supplier will arrange trans-port. The risks attached to the storage, loading, transport and unloading remain with the Client in such instances. The Client may take out insurance to cover those risks.

6.3. In the event that objects are to be exchanged and the Client continues to use the exchangeable object while awaiting de-livery of the new object, the risks attached to the exchange-able object remain with the Client until the moment that pos-session of the object has been relinquished to the Supplier.

Article 7: Price changes

7.1. The Supplier may charge any increases in cost-determining factors that arise after the agreement is concluded to the Cli-ent if the performance of the agreement has not been com-pleted at the moment of the increase.

7.2. The Client is obliged to pay the price increases as meant in Article 7.1 at the same time as the principal sum or the next instalment is paid.

7.3. If the Client provides goods and the Supplier is prepared to use those goods, the Supplier may charge up to 20% of the market price of the goods provided.

Article 8: Impracticability of the engagement

8.1. The Supplier is entitled to suspend the fulfilment of any obli-gations if any circumstances that could not be foreseen when the agreement was concluded and that are beyond the Sup-plier’s influence temporarily prevent the fulfilment of those ob-ligations.

8.2. Circumstances that the Supplier could not foresee and that are beyond the Supplier’s influence are understood to include (but are not limited to) the circumstance that the Supplier’s own suppliers and/or subcontractors fail to meet their obliga-tions, or fail to do so in time, the weather, earthquakes, fire, loss or theft of tools, the destruction of materials to be proc-essed, road blocks, strikes or work stoppages and restrictions on import or trade.

8.3. The Supplier is no longer entitled to suspend the fulfilment of any obligations when the temporary impossibility of perform-ance has lasted for more than six months. The agreement may not be dissolved until that term has lapsed, and only in respect of those obligations that have not been fulfilled. In that event, the Parties are not entitled to any compensation for damages incurred as a result of that dissolution.

Article 9: Scope of the work

9.1. The Client is responsible for ensuring that all licences, per-mits, dispensations and other administrative decisions that are needed to carry out the work are obtained in time.

9.2. The price for the work does not include the following: a. the costs of earthwork, pile driving, demolition, foundation

work, cementing, carpentry, plastering, painting, wallpaper-ing, repairs or other construction work;

b. the costs of connecting gas, water, electricity or other in-frastructural facilities;

c. the costs of preventing or limiting damages to any objects situated on or near the work site;

d. the costs of disposing of materials, building materials or waste products;

e. hotel and travelling expenses.

Article 10: Changes to the work

10.1. Any changes to the work will result in contract variations in at least the following instances:

a. if the design or the specifications change; b. if the information provided by the Client does not match the

actual situation; c. in the event of deviation from estimated quantities by more

than 10%.

10.2. Contract extras will be charged based on the value of the cost-determining factors as at the moment that the contract extra is performed. Contract deductions will be settled based on the value of the cost-determining factors as at the moment that the agreement was concluded.

10.3. If the value of the contract deductions exceeds that of the contract extras, the Supplier is entitled to charge the Client for 10% of the difference upon final settlement. This provision does not apply to any contract deductions based on requests from the Supplier.

Article 11: Performance of the work

11.1. The Client is responsible for ensuring that the Supplier can carry out the activities without interruption and at the times agreed, and that the Supplier has access to the necessary fa-cilities when carrying out the activities, such as:

- gas, water and electricity; - heating; - lockable and dry storage space; - all facilities required by the laws and regulations governing

working conditions.

11.2. The Client is liable for all damages, including those resulting from loss, theft, burning or harm, to objects belonging to the Supplier, the Client and/or any third parties, such as tools and materials intended for use in the work that are located on the site where the activities are carried out or at another agreed location.

11.3. If the Client fails to fulfil the obligations as set out in Arti-cle 11.1 and 11.2, and that failure causes delays in the per-formance of the activities, the activities will be carried out as soon as the Client as yet fulfils those obligations and when the Supplier’s schedule permits. The Client is liable for all damages that the Supplier incurs as a result of the delay.

Article 12: Completion of the work

12.1. The project will be deemed to have been completed when: a. the Client has approved the work; b. the Client has put the work into use. If the Client puts part

of the work into use, that part will be deemed to have been completed;

c. the Supplier has notified the Client in writing that the work is finished and the Client has not communicated, within 14 days after than notification, whether or not the work has been approved;

d. the Client does not approve the work on grounds of minor defects or missing parts that can be repaired or provided within 30 days and that do not prevent the work from being put into use.

12.2. If the Client does not approve the work, the grounds on which the approval is withheld must be communicated to the Sup-plier in writing.

12.3. If the Client does not approve the work, the Supplier must be given another opportunity to complete the work. The provi-sions set out in this Article apply anew.

12.4. The Client indemnifies the Supplier against all claims from third parties for damages to parts of the work that have not yet been completed that are caused by use of parts of the work that have already been completed.

Article 13: Liability

13.1. The Supplier is liable for all damages that the Client incurs that stem directly and exclusively from a shortcoming attribut-able to the Supplier. However, only those damages for which the Supplier is insured, or should within reason have been in-sured, qualify for compensation.

13.2. If, when the agreement is concluded, it is impossible for the Supplier to take out insurance as meant in Article 13.1, or im-possible to do so at reasonable conditions, or if it is subse-quently impossible to renew the insurance policy at reason-able conditions, the maximum compensation payable for damages is the amount that the Supplier charged for the agreement in question (exclusive of VAT).

13.3. The following damages do not qualify for compensation: a. trading losses, including losses caused by delays and loss

of profits. The Client should take out insurance to cover such damages, if such is deemed desirable;

b. supervision damages, which are understood to include damages caused, during or as a result of the performance of the work, to objects on which work is being carried out to objects situated in the vicinity of the work site. The Cli-ent should take out insurance to cover such damages, if such is deemed desirable;

c. damages caused by intent or gross negligence on the part of helpers or non-management employees of the Supplier.

13.4. The Supplier is not liable for damages to materials provided by or on behalf of the Client that result from improper proc-essing. At the Client’s request, the Supplier will repeat the process, using materials provided by the Client, at the Client’s expense.

13.5. The Client indemnifies the Supplier against all claims from third parties for product liability stemming from defects in products provided by the Client to third parties that consisted of or included products and/or materials provided by the Sup-plier.

Article 14: Guarantees

14.1. The Supplier guarantees the proper performance of the prod-uct or service stipulated for a period of six months after deliv-ery or completion.

14.2. If the product or service stipulated consists of contract work, the Supplier guarantees the soundness of the construction delivered and the materials used, if the Supplier was at liberty to choose those materials, for the period specified in Arti-cle 14.1.

If the construction delivered and/or the materials used prove to be unsound, the Supplier will make the necessary repairs or replacement. Those parts that are to be repaired at the Supplier’s place of business or are to be replaced by the Supplier must be sent to the Supplier carriage paid. Disas-sembly and assembly of those parts, plus any hotel and trav-elling expenses, are for the Client’s account.

14.3. If the product or service stipulated (partly) consists of the processing of materials provided by the Client, the Supplier guarantees proper processing for the period specified in Arti-cle 14.1.

If any processing proves to have been performed improperly, the Supplier will do one of the following, at the Supplier’s dis-cretion:

- repeat the process, in which case the Client must provide new materials, at the Client’s own expense;

- repair the shortcoming, in which case the Client must re-turn the materials to the Supplier carriage paid;

- credit the Client for a proportionate part of the invoice.

14.4. If the product or service stipulated consists of the delivery of an object, the Supplier guarantees the soundness of the ob-ject delivered for the period specified in Article 14.1.

If the delivery proves to have been defective, the object must be returned to the Supplier carriage paid. The Supplier will then elect either:

- to repair the object; - to replace the object; - to credit the Client for a proportionate part of the invoice.

14.5. If the product or service stipulated (partly) consists of the fit-ting and/or assembling of a delivered object, the Supplier guarantees the soundness of the fitting and/or assembly for the period specified in Article 14.1.

If the fitting and/or assembly prove to be defective, the Sup-plier will repair the fault. Any hotel and travelling expenses are for the Client’s account.

14.6. Factory guarantees apply to those parts for which the Client and the Supplier agree such explicitly and in writing. If the Client has had the opportunity to examine the substance of the factory guarantee, that factory guarantee will replace the guarantees specified in this Article.

14.7. In all situations, the Client must allow the Supplier the oppor-tunity to repair any shortcomings and/or repeat the process-ing.

14.8. The Client may only invoke guarantees after all obligations in respect of the Supplier have been fulfilled.

14.9. a. No guarantee is given when defects are the result of: - normal wear and tear; - improper use; - lack of proper maintenance; - fitting, assembly, alterations or repairs by the Client or

by third parties. b. No guarantee is given for delivered objects that were not

new when they were delivered of for objects whose use the Client prescribed or that were provided by or on behalf of the Client.

c. No guarantee is given on inspections of and/or repairs to objects belonging to the Client.

Article 15: Complaints

The Client may not invoke defects in the product or service unless a written complaint has been submitted to the Supplier within four-teen days after the defect was detected or should, within reason, have been detected.

Article 16: Failure to take delivery

In the event that the Client has not taken delivery of any object after the delivery deadline has passed, those objects will remain avail-able to the Client. Any objects of which the Client has not taken delivery will be stored for the Client’s account and risk. The Sup-plier may at any time invoke the powers granted by Article 6:90 of the Dutch Civil Code.

Article 17: Payment

17.1. Payment must be made at the Supplier’s place of business or to an account specified by the Supplier.

17.2. Unless agreed otherwise, payment must be made using one of the following methods:

a. for counter sales: cash; b. for payment in instalments: - 40% of the total price when the engagement is granted; - 50% of the total price when the materials have been

delivered or, if the engagement does not include deliv-ery of the materials, upon commencement of the activi-ties;

- 10% of the total price upon completion; c. in all other instances: within thirty days after the date on

the invoice.

17.3. The payment conditions specified notwithstanding, the Client is obliged, at the Supplier’s request, to provide security for payment, to the Client’s satisfaction. Failure on the Client’s part to provide such security for payment within the period specified will immediately constitute default. In that event, the Supplier is entitled to dissolve the agreement and recover any damages from the Client.

17.4. The Client’s right to offset any claims on the Supplier is ex-cluded, except in the event of the Supplier’s bankruptcy or if judicial debt rescheduling is applied in respect of the Supplier.

17.5. The full claim for payment is payable on demand in the follow-ing instances:

a. if any payment deadline has been exceeded; b. if the Client has been declared bankrupt or requests sus-

pension of payments; c. if any of the Client’s assets or claims are seized; d. if the Client (if a company) is dissolved or wound up; e. if the Client (if a natural person) makes a request for judi-

cial debt rescheduling, is placed under guardianship or dies.

17.6. If payment has not been made by the payment deadline specified, the Client is immediately liable to pay the Supplier interest. That interest is payable at a rate of 12% per year, or at the statutory rate if that is higher. For the purposes of cal-culating the interest, partial months are counted as full months.

17.7. If payment has not been made by the payment deadline specified, the Client is immediately liable to pay the Supplier all extrajudicial costs, to a minimum of €75.

The costs are calculated in accordance with the following ta-ble:

over the first €3,000 15% over the excess up to €6,000 10% over the excess up to €15,000 8% over the excess up to €60,000 5% over the excess from €60,000 3%

If the actual extrajudicial costs exceed those based on this formula, the Client is liable to pay the actual costs.

17.8. If judicial proceedings are decided in the Supplier’s favour, all costs incurred by the Supplier in connection with those pro-ceedings are for the Client’s account.

Article 18: Retention of ownership and pledging

18.1. After delivery, the Supplier remains the owner of the objects delivered for as long as:

a. the Client fails or will fail in the fulfilment of the obligations stemming from this agreement or any similar agreements;

b. the Client fails or will fail to pay for any work performed or to be performed under such agreements;

c. the Client has not paid any claims arising from non-fulfilment of those agreements, such as compensation for damages, penalties, interest and costs.

18.2. As long as any objects are subject to retention of ownership, the Client may not encumber those objects in any way that exceeds the scope of the Client’s ordinary activities.

18.3. Having invoked retention of ownership, the Supplier may re-trieve the objects delivered. The Client must allow the Sup-plier to enter the place where those objects are located.

18.4. If the Supplier cannot invoke retention of ownership because the objects delivered have been subject to confusion, defor-mation or accession, the Client is obliged to give the newly formed objects in pledge to the Supplier.

Article 19: Termination

If the Client wishes to dissolve the agreement without the Supplier having failed in the performance thereof and if the Supplier so agrees, the agreement will be terminated by mutual consent. In that event, the Supplier is entitled to reimbursement for all financial losses incurred, such as damages, loss of profits and costs.

Article 20: Applicable law and competent court

20.1. These Terms & Conditions are governed by the laws of the Netherlands.

20.2. The Vienna Sales Convention (C.I.S.G.) does not apply to these Terms & Conditions, nor do any other international regulations whose exclusion is permitted.

20.3. Only the Dutch civil court within whose jurisdiction the Sup-plier’s place of business is situated is competent to pass judg-ment on disputes, unless such is at odds with any mandatory rules of law. The Supplier is entitled to deviate from this juris-diction clause and apply the statutory rules for jurisdiction.

20.4. The Parties may agree on another form of dispute settlement, such as arbitration or mediation.

These conditions are a full translation of the Dutch version of the ‘METAALUNIEVOORWAARDEN’ as deposited with the Registry of the District Court in Rotterdam on 1 January 2008. Explanation and interpretation of the text of these Conditions shall be based on the Dutch text.

METAALUNIE CONDITIONS General delivery and payment conditions of Koninklijke Metaalunie (the Dutch organisation for small and medium-sized enterprises in the metal industry), referred to as ‘the METAALUNIE

CONDITIONS’, formerly referred to as ‘the SMECOMA CONDITIONS’, filed with the Court Registry in Rotterdam on 1 January 2008.

Published by Koninklijke Metaalunie, PO Box 2600, 3430 GA Nieuwegein, the Netherlands. Koninklijke Metaalunie

Van Leusden B.V.

P.O. Box 1154870 AC Etten Leur

The Netherlands

Phone +31 76 50 34 255Fax +31 76 50 34 966

[email protected]

van leusden catalogue 2008

Documents