valve & valve manifolds - vsp-co.orgvsp-co.org/assets/wika-micro-catalogue.pdf · micro...

VALVE & VALVE MANIFOLDS

[email protected]

2015

DETAILING BY INDRAJEET TIWARI

MICRO PRECISION PRODUCTS PVT. LTD. (A DIVISION OF WIKA GROUP) | Haryana INDIA

mailto:[email protected]

Micro Precision Products Pvt. Ltd. (A Division of WIKA Group) | A Division Of WIKA Group 1

Quality Policy

“We are committed to Manufacture and Supply Quality Instrumentation Valves, Valve Manifolds and Differential Pressure Flow Elements i.e. Orifice Plates, Flow Nozzles Venturi Tubes, Flange Unions and other Accessories to

achieve Customer Satisfaction through continual improvement in our process and management system”


STANDARD FEATURES OF OUR PRODUCTS: � BODY TO BONNET SEAL

Bonnet to Valve Body Connection

Reliable Metal to Metal Seal

This Design Prevents Bonnet Thread Corrosion

Eliminates Possible Tensile Breakage of the Bonnet

� BACK SEATING

Provided in Bonnet for Safety to Prevent Stem Blow –Out

Accidental Removal While in Operation

Give a Metal to Metal Sealing While in Fully Open Position

� PACKING BELOW STEM THREADS

Preventing Lubricant Washout

Thread Corrosion.

� BONNET ASSEMBLY DESIGN

Highly Reliable Bonnet Assembly Design

Working in Over Few Million Valves

� ADJUSTABLE PACKING

The Packing Can be adjusted by Slightly Tightening the Adjuster.

Provides Long Valve Life.

� TESTING

100% Pneumatic Test

All Valves & Valve Manifold are 100% Hydraulic Tested at 1.5 Times of Rated Pressure.

Our Valves and Manifolds are Burst Pressure Tested at 4 Times of Working Pressure (40000 Psi).’

� END CONNECTION AVAILABLE

NPT, ANPT, BSP, Socket Weld, BSPT, Flanged and Butt weld etc.

� COMPACT DESIGN

Requires Minimum Space for Operation and Installation


NEEDLE VALVE:


MNV10/15 (HARD / SOFT SEAT):

x Available Material: SS316/316L, SS304, MONEL 400, HASTELLOY C-276, DUPLEX, SUPER DUPLEX, INCONEL 625 & CARBON STEEL.

x Available Packing Material: PTFE, GRAFOIL, VITON

x Temperature Pressure Rating: PTFE- 6000 PSI at 200°F 4000 PSI at 500°F GRAFOIL: 6000 PSI at 200°F 1500 PSI at 750°F

x Process / Instrument Connection :1/2” NPT (F), (Options – 1/4”, 3/4”, 3/8”, 1” NPT BSP & Socket Weld).





x Process / Instrument Connection :1/2” NPT (M) (Options – 1/4”, 3/4”, 3/8”, 1” NPT BSP & Socket Weld).






x Process Connection : 1/2” NPT (M) x Instrument Connection : 1/2” NPT (F)

(Options – 1/4”, 3/4”, 3/8”, 1” NPT BSP & Socket Weld).




x Temperature Pressure Rating: PTFE- 6000 PSI at 200°F

4000 PSI at 500°F GRAFOIL: 6000 PSI at 200°F

1500 PSI at 750°F x Process / Instrument Connection : 1/2” NPT (F),








1500 PSI at 750°F x Process Connection : 1/2” NPT (M), x Instrument Connection : 1/2” NPT (F)


.


x Available Material: SS316/316L, SS304, MONEL 400, HASTELLOY C-276, DUPLEX, SUPER DUPLEX, INCONEL 625 & CARBON STEEL


x Temperature Pressure Rating: PTFE- 6000 PSI at 200°F 4000 PSI at 500°F

GRAFOIL: 6000 PSI at 200°F 1500 PSI at 750°F

x Process Connection / Instrument : 1/2” NPT (F) (Options – 1/4”, 3/4”, 3/8”, 1” NPT, BSP & Socket Weld).


PRESSURE GAUGE VALVE:


MPGV10/15 (HARD / SOFT SEAT):




4000 PSI at 500°F GRAFOIL: 6000 PSI at 200°F 1500 PSI at 750°F

x Process Connection:1/2” NPT (M) Instrument Connection : 1/2” NPT (F), (Options – 1/4”, 3/4”, 3/8”, 1” NPT BSP & Socket Weld).

x Vent Connection: 1/4" NPT (F) with Plug

MPGV20/25 (HARD / SOFT SEAT):Multi Port x Available Material:

SS316/316L, SS304, MONEL 400, HASTELLOY C-276, DUPLEX, SUPER DUPLEX, INCONEL 625 & CARBON STEEL.



x Process Connection:1/2” NPT (M) Instrument Connection: 1/2” NPT (F) 3 Port,







x Process Connection: 1/2” NPT (M) Instrument Connection: / 1/2” NPT (F) (Options – 1/4”, 3/4”, 3/8”, 1” NPT BSP & Socket Weld).

x Vent Connection: 1/4" NPT (F)

MPGV32A/R (HARD SEAT):




x Process Connection:1/2” NPT (F), x Instrument Connection: 1/2” NPT (M)

(Options – 1/4”, 3/4”, 3/8”, 1” NPT BSP & Socket Weld). x Vent Connection:1/4" NPT (F) with Plug


MPGV33 (HARD SEAT):




x Process / Instrument Connection: 1/2” NPT (M)


x Vent Connection: 1/4” NPT (F) with Plug

MPGV34 (HARD SEAT):





x Process / Instrument Connection: 1/2” NPT (F), (Options – 1/4”, 3/4”, 3/8”, 1” NPT BSP & Socket Weld).

x Vent Connection:1/4” NPT (F) with Plug






x Process / Instrument Connection: 1/2” NPT (M), (Options – 1/4”, 3/4”, 3/8”, 1” NPT BSP & Socket Weld).






x Process Connection : 1/2” NPT (M) Instrument Connection : / 1/2” NPT (F) 3 Port, (Options – 1/4”, 3/4”, 3/8”, 1” NPT BSP & Socket Weld).



MPGV72 (HARD SEAT):




x Process / Instrument Connection : 1/2” NPT (M), (Options – 1/4”, 3/4”, 3/8”, 1” NPT BSP & Socket Weld).

x Vent Connection: M8 X 1.25 (F) with Plug


x Available Material: SS316/316L, SS304, MONEL 400 HASTELLOY C-276, DUPLEX, SUPER DUPLEX, INCONEL 625 & CARBON STEEL.







2-VALVE MANIFOLD:


M2VM10/15 (HARD / SOFT SEAT):




x Process / Instrument Connection: 1/2” NPT (F), Options – 1/4”, 3/4”, 3/8”, 1” NPT BSP & Socket Weld.



x Available Material: SS316/316L, SS304, MONEL 400, HASTELLOY C-276, DUPLEX, SUPER DUBLEX, INCONEL 625 & CARBON STEEL

x Available Packing Material PTFE, GRAFOIL, VITON


x Process / Instrument Connection: 1/2” NPT (F), (Options – 1/4”, 3/4”, 3/8”, 1” NPT BSP & Socket Weld)







x Process / Instrument Connection : 1/2” NPT (F) (Options – 1/4”, 3/4”, 3/8”, 1” NPT BSP & Socket Weld).






x Process Connection: 1/2” NPT (M) Instrument Connection: / 1/2” NPT (F),

(Options – 1/4”, 3/4”, 3/8”, 1” NPT BSP & Socket Weld)




x Available Material: SS316/316L, SS304, MONEL 400, HASTELLOY C-276, DUPLEX, SUPER DUPLEX, INCONEL 625 & CARBON

STEEL. x Available Packing Material:

PTFE, GRAFOIL, VITON x Temperature Pressure Rating:

PTFE- 6000 PSI at 200°F 4000 PSI at 500°F GRAFOIL: 6000 PSI at 200°F 1500 PSI at 750°F

x Process Connection: 1/2” NPT (F) Instrument Connection: FLANGED (Options – 1/4”, 3/4”, 3/8”, 1”

NPT BSP & Socket Weld). x Vent Connection: 1/4” NPT (F) with Plug








M2VMH80/85 (HARD / SOFT SEAT): (2VM H Type)




x Process / Instrument Connection: FLANGED x Vent Connection:1/4” NPT (F) with Plug

M2VMT50/55 (HARD / SOFT SEAT): (2VM T Type)




x Process Connection:1/2” NPT (F) Instrument Connection: FLANGED (Options – 1/4”, 3/8”, NPT BSP & Socket Weld).



M2VMCP60/65 (HARD / SOFT SEAT): 2VM Coplanar x Available Material:

SS316/316L, SS304, MONEL 400, HASTELLOY C-276, DUPLEX, SUPER DUBLEX, INCONEL 625 & CARBON STEEL



x Process Connection: 1/2” NPT (F) Instrument Connection: COPALNAR FACE,

(Options – 1/4”, 3/4”, 3/8”, 1” NPT BSP & Socket Weld)

Vent Connection: 1/4” NPT (F) with Plug

NOTE: - SPECIALLY DESIGNED FOR ROSEMOUNT TRANSMITTER

M2VMT51 (HARD SEAT): 2VM T Type Small




x Process Connection: 1/2” NPT (F) Instrument Connection : FLANGED (Options – 1/4”, 3/8”, NPT BSP & Socket Weld).



M2VMH50/55 (HARD / SOFT SEAT): 2VM H Type




x Process / Instrument Connection: FLANGED x Vent Connection: 1/4” NPT (F) with Plug

M2VMCP61 (HARD SEAT): 2VM Coplanar Side Entry




x Process Connection: 1/2” NPT (F) Instrument Connection: Coplanar Face (Options – 1/4”, 3/4”, 3/8”, 1” NPT BSP & Socket Weld).




3-VALVE MANIFOLD:


M3VM12 (HARD SEAT): 3VM PE Version




x Process / Instrument Connection :1/2” NPT (F) (Options – 1/4”, 3/4”, 3/8”, 1” NPT BSP & Socket Weld).


M3VM20/25 (HARD / SOFT SEAT): 3VM H Type

x Available Material: SS316/316L, SS304, MONEL 400, HASTELLOY- 276, DUPLEX, SUPER DUBLEX, INCONEL 625

& CARBON STEEL. x Available Packing Material:

PTFE, GRAFOIL, VITON x Temperature Pressure Rating:

PTFE- 6000 PSI at 200°F 4000 PSI at 500°F GRAFOIL: 6000 PSI at 200°F 1500 PSI at 750°F

x Process / Instrument Connection: Flanged x Vent Connection:1/4” NPT (F) with Plug


M3VM30/35 (HARD /SOFT SEAT): 3VM T Type




x Process Connection: 1/2” NPT (F), Instrument Connection: Flanged (Options – 1/4”, 3/8” NPT, BSP & Socket Weld).


M3VM31-WV (HARD / SOFT SEAT): 3VM T Type





1500 PSI at 750°F x Process Connection: 1/2” NPT (F),

Instrument Connection: Flanged (Options – 1/4”, 3/8” NPT, BSP &

Socket Weld).


M3VM41 (HARD / SOFT SEAT): 3VM Wafer Type




x Process Connection : 1/2” NPT (F), Instrument Connection: Flanged (Options – 1/4”,3/8”, NPT BSP & Socket Weld).


M3VMCP50/55 (HARD / SOFT SEAT): 3VM Coplanar




x Process Connection:1/2” NPT (F), Instrument Connection : Coplanar Face (Options – 1/4”, 3/8” NPT BSP & Socket Weld




M5VMCP51 (HARD / SOFT SEAT): 3VM Coplanar Side Entry




x Process Connection:1/2” NPT (F), (Options – 1/4”, 3/8”, NPT, BSP & Socket Weld). Instrument Connection: Coplanar Face

x Vent Connection:1/4” NPT (F) with Plug NOTE: - SPECIALLY DESIGNED FOR ROSEMOUNT TRANSMITTER


5-VALVE MANIFOLD:


M5VM1E11/16 (HARD / SOFT SEAT): 5VM Wafer Type




x Process Connection:1/2” NPT (F) (Options – 1/4”, 3/8”, NPT, BSP & Socket Weld). Instrument Connection: Flanged


M5VM1E31/36 (HARD / SOFT SEAT):5VM PE Version



x Temperature Pressure Rating: PTFE- 6000 PSI at 200°F 4000 PSI at 500°F GRAFOIL: 6000 PSI at 200°F

1500 at 750°F x Process / Instrument Connection:1/2” NPT (F)

(Options – 1/4”, 3/8”, NPT, BSP & Socket Weld).



M5VMCP50/55 (HARD / SOFT SEAT): 5VM Coplanar




x Process Connection: 1/2” NPT (F) (Options – 1/4”, 3/8”, NPT BSP & Socket Weld) Instrument Connection: Coplanar Face



M5VMCP51/56 (HARD / SOFT SEAT): 5VM Coplanar Side Entry




x Process Connection: 1/2” NPT (F) (Options – 1/4”, 3/8”, NPT BSP & Socket Weld)

Instrument Connection: Coplanar Face. x Vent Connection: 1/4” NPT (F) with Plug



M5VMH1E90/95 (HARD / SOFT SEAT): 5VM H Type




x Process / Instrument Connection: Flanged x Vent Connection: 1/4” NPT (F) with Plug

M5VM1E90/95 (HARD/ SOFT SEAT): 5VM T Type:




x Process Connection: 1/2” NPT (F), (Options – 1/4”, 3/8”, NPT, BSP & Socket Weld).

Instrument Connection: Flanged x Vent Connection: 1/4” NPT (F) with Plug


ORDERING INFORMATION:

valve & valve manifolds - vsp-co.orgvsp-co.org/assets/wika-micro-catalogue.pdf · micro...

Documents