vallourec usa corporation octg catalog€¦ · vallourec usa corporation / introduction / pg. 1 ......

Vallourec USA CorporationOCTG Catalog

October 2017

Vallourec USA Corporation / Introduction / pg. 1

Table of Contents

Vallourec USA Corporation

Disclaimer and Limits of Liability............1

Introduction............................................2

Premium Products..................................9

Premium Services................................15

Premium Connections..........................19

Material Properties...............................31

Performance Data (Tubing)...................37

Performance Data (Casing 4 1/2” - 7")...............................41

Performance Data (Casing 7 5/8” - 10 3/4”)...............................61

Performance Data (Casing 11 3/4” - 26”)...........................81

Marking and Color Codes.....................95

All information is provided by Vallourec or its affiliates at user’s sole risk, without liability for loss, damage or injury resulting from the use thereof; and on an “AS IS” basis without warranty or representation of any kind, whether express or implied, including without limitation any warranty of merchantability, fitness for purpose, accuracy or completeness. This document and its contents are subject to change without notice. In no event shall Vallourec or its affiliates be responsible for any indirect, special, incidental, punitive, exemplary or consequential loss or damage (including without limitation, loss of use, loss of bargain, loss of revenue, profit or anticipated profit) however caused or arising, and whether such losses or damages were foreseeable or Vallourec or its affiliates was advised of the possibility of such damages.


The plant in Muskogee, Oklahoma specializes in production of high perfor-mance, proprietary, and custom casing and coupling stock in addition to API 5CT products. The facility offers heat treatment with precise temperature control, straightening and hot sizing, finishing, hydrostatic pressure testing, and premium CNC threading services up to 16". The Muskogee mill is known for providing the industry with high performance sour service grades supported by an on-site metallurgical lab.

Vallourec in North America

pg. 2 / Vallourec USA Corporation / Introduction

Vallourec North America, a regional division of The Vallourec Group, is known for quality products, exceptional service, and constant innovation. Vallourec North America is comprised of six companies that provide products and services along the entire tubulars supply chain in the USA, Canada, and Mexico.

Vallourec North America's largest steel and pipe-making operations are located in Ohio, Texas, and Oklahoma. These facilities are capable of rolling seamless tubular products in outside diameters (ODs) ranging from 2 3/8" to 10 3/4", threading up to 18", and threading up to 20". The Ohio complex boasts the latest technology in electric arc furnace (EAF) steelmaking, two pipe mills, heat treat-ment, end finishing and threading. Other facilities across North America provide additional proprietary products and services.

The Vallourec Group is a leading world manufacturer of seamless steel tubes and specific tubular products for industrial applications. Specializing in the most complex and highly-demanding industrial applications (extreme temperatures, pressures and corrosion), notably in the energy sector, the Group offers a portfolio of diversified, unique and high value-added tubular products.

With production facilities on four conti-nents, complemented by a worldwide network of sales offices and service centers, Vallourec ensures a global presence for its customers.

Its Oil & Gas Division is recognized worldwide for its commitment to extreme environment solutions. The products designed and developed by the Oil and Gas Division meet the reliability require-ments of the most demanding customers. They include drilling products, plain-end or threaded seamless tubes and casing for oil and gas production with standard API or VAM® premium connections for a variety of applications.


The Vallourec Group in the World:

The Houston, Texas operations provide services such as heat-treatment, straightening and hot sizing, finishing and hydrostatic pressure testing, third-party inspection, 8D collapse testing, semi- premium and API threading, and access to VAM® premium CNC thread-ing services. The Houston high-tech, heat-treating facility provides precise temperature control and water quench-ing, allowing production of high yield strength OCTG and coupling stock required for today’s critical environments.

Other North American facilities include three premium threading entities: Vallourec Canada, VAM USA with four sites between Houston, Texas, and Muskogee, Oklahoma, Youngstown, Ohio, and Vallourec Mexico based in Veracruz. Finally, Vallourec Tube-Alloy located in Houston, Texas, Houma, Louisiana and Broussard, Louisiana provides downhole premium accessories worldwide.


Customized Solutions to Service Long Term Partnerships

Vallourec offers a worldwide after-sale services network with VAM® Services and VAM® Field Service International:

A VAM® licensee network with near 200 workshops in 55 countries located close to our customers operations. They provide accessory threading, repair and inspection of VAM® Premium Connections. VAM® Services, a division of Vallourec Oil & Gas France, is in charge of the quality management of the VAM® licensees’ network. This includes the qualification of new workshops, regular audits of each licensee, the dispatch and control of all VAM® technical documentation and tools such as gauges, inserts, etc.A full team of certified VAM® Field Services technicians are available 24 hours a day to provide field support for inspection, rig preparation and supervision of running Vallourec pipe and VAM® connections throughout the world.

High QHS&E Standards

Vallourec has developed QHS&E standards to consistently comply with applicable regulations and national laws, while respecting and fulfilling country-specific needs.

Quality

High quality and service standards are maintained through the company’s Six Sigma and Continuous Improvement programs. All Vallourec facilities are ISO 9001: 2008 certified in addition to being licensed to manufacture API 5CT, 5L and 5D products.

Create, improve and promote solutions for the future

Our comprehensive Research & Development policy aims to provide innovative solutions to our customers. The objective is to create, improve and promote products, services, materials and processes for the future.

Attentive to actual market needs and working in close cooperation with production teams, our R&D staff has access to substantial resources for put-ting this policy into effect:

Over 500 employees dedicated to R&DAn R&D budget of $68 million in 2016

Six research centers in four countries dedicated to OCTG product development:

Germany - Vallourec Research Center Germany, Düsseldorf, Germany - Vallourec Competence Center Riesa, Riesa, GermanyFrance - Vallourec Research Center France, Aulnoye, FranceBrazil - Vallourec Research Center Brazil, Belo Horizonte, Brazil - Vallourec Competence Center Rio, Rio de Janeiro, BrazilUSA - VAM® Connection Technology Center USA, Houston, USA

These centers, equipped with high-per-formance investigative and modelling tools, provide expertise to Vallourec’s core competencies, including metallurgy, heat transfer technology, non-destructive testing, corrosion, surface treatment, premium connection technology, and product and process simulations.

Vallourec deploys Continuous Improvement Process (CIP) Groups as part of its Total Quality Management program and constantly optimizes the performance of the workforce with dynamic, extended vocational training programs and efficient Competency Management systems.

Health and Safety

"The health and safety of our employees in all our locations is of key significance for the future of our company and it takes the very highest priority ..." (Chairman of the Executive Board of Vallourec). Vallourec is certified to OHSAS 18001:2007, demonstrating the company’s commitment to safety.

Safety Mission Statement

Ensure that Safety is a core business value. Implement and maintain a continuous improvement-based occupational safety and health (OSH) management system. Manage risks within acceptable industry standards to prevent occupational related injuries and illnesses. Promote a culture that does not accept injuries as a cost of doing business. Incorporate safety into every business process and decision. Measure performance and actively seek opportunities for improvement. Actively seek input and feedback from all Team Members. Comply with all regulatory standards and, where feasible, implement best practice methods.


To secure complete control over the entire production process from steel-making to shipment of the finished product, Vallourec operates steel mills in the United States and Brazil. It also holds a partial owner-ship in the Ascoval mill, France, and HKM mill, Germany. The Vallourec Group of companies produces hot-rolled seamless steel tubes in sizes ranging from 2-3/8” to 26”. Other sizes are available upon request. Available production capacity, coupled with the competence of expert teams, enables Vallourec to accommo-date production of specially formulated grades, creating conditions of continuing performance improvements to service the customer.

Vallourec offers a full and unique range of products:

API gradesYield strength: 55 to 150 ksi.High Collapse: includes the requirements and parameters adapted to the environments highest pressures. 13% Cr & super 13% Cr: suitable for Sweet CO2 environment with limited H2S presence. It covers the requirements and parameters of such hostile conditions including high pressures, high temperatures and more. Sour Service: suitable for environments where H2S is present. It covers the requirements and parameters of such hostile conditions including high pressures, low temperatures, low pH, and more.

Corrosion Resistant Alloy (CRA): suitable for the more stringent corrosive environments beyond the properties of Sour Service grades.Vacuum Insulated Tubing (VIT): ideal for deepwater projects and other specialized applications including reduction of APB, heavy oil production, and steam injection.Expandable Tubing (ET): ideal for recompletions, zonal isolation and casing remediation.Riser Grade: Developed for high fatigue conditions seen in top tension riser systems with enhancements in chemistry, hardness, CTOP performance, and SSC resistance.


An Integrated, Competitive Process

Premium Products

Preserving our environment

Vallourec aims to minimize the environ-mental impact of its activities at all levels, and treats the well-being of future generations as a major priority. Vallourec environmental priorities focus on optimizing resources, reducing CO2 emis-sions and waste, as well as certifying facilities. Optimization of resources

A series of initiatives have been under-taken to optimize consumption of resources such as water, energy and raw materials, and to improve the conditions in which they are used. Considerable efforts have been made to reduce water consumption at all Vallourec locations, in particular by recycling water and collecting runoff. As a result, water use was cut in half in a ten year period.

Lower CO2 emissions

Vallourec is committed to reducing CO2 emissions as exemplified by the steel manufacturing process at Vallourec do Brazil, which uses charcoal from its own eucalyptus plantations (Biomass) in its blast furnaces as a substitute for coke. As they grow, the trees in these plantations consume carbon dioxide and release oxygen. CO2 emissions from the steel mill are offset by absorptions by the eucalyptus plantations and as a result, the overall carbon balance for the production of steel in Brazil is the lowest in the market when compared with other methods of production (i.e. electric arc furnace or blast oxygen furnace).

Waste reduction

Vallourec is also working hard to cut pollutant emissions, reduce noise, decrease waste volumes and system-atically recover and reprocess residual waste. All indicators measuring the release of pollutants into the environment comply with regulatory standards and performance has consistently improved over the last three years. Certified facilities

Regular environmental audits are organized in each country to assess regulatory compliance, environmental performance and ecological risks. Most of Vallourec’s production facilities, representing 98% of total production, are certified ISO 14001.


Environment

Premium Products

Vallourec USA Corporation / Premium Products / pg. 9

Premium Tubular Solutions

Vallourec specializes in developing, manufacturing and servicing high performance, proprietary, custom and value added tubular solutions. With so many products to choose from, Vallourec provides engineering and technical services to assist you in select-ing the optimal tubular solution for your particular downhole application.

In addition to standard API 5CT casing grades, Vallourec produces pipe to meet specific customer requirements, including:

Non-standard sizes and weights Custom applications Custom grades Special inspections Special testing Special documentation Increased remaining wall to enhance burst

All Vallourec quenched and tempered (Q&T) API, API enhanced, and propri-etary grades meet API 5CT (ISO 11960) PSL2 requirements.

Premium Products

Vallourec USA Corporation/ Premium Products / pg. 11

Sour Service Casing

Vallourec Sour Service Casing offers resistance to the most corrosive environ-ments confirmed by extensive NACE testing. In addition, Vallourec provides workable solutions for the design of deep, high-pressure, sour wells by carefully designing and controlling the following parameters:

Special chemistry and superior quench-and-temper processing.Superior sulfide stress cracking resistance.Standard sulfide stress corrosion resistance testing is conducted in conformance with NACE TM0177 requirements. NACE TM0177 Method D sulfide stress corrosion resistance testing can be provided.

Vallourec Star also offers enhanced API sour service products such as T95E with higher burst and T95HC with higher collapse. For mild sour conditions Vallourec Star is offering P110MS which is tested in fit for purpose condition meeting the NACE MR0175 require-ments. For severe sour service condi-tions or special applications such as HPHT, Vallourec offers proprietary grades with improved sour service performance.

pg. 10 / Vallourec USA Corporation / Premium Products

Enhanced Burst Casing

Vallourec Star Enhanced Burst Casing (grade nomenclature denoted by E) delivers controlled yield strength with a higher burst rating than similar API. As an added benefit, the higher yield strength also improves tension and collapse ratings.

Applications – Exploration Wheels Increased Fracture Pressure High Reliability Standards

High Collapse Casing

Vallourec High Collapse and Enhanced Collapse (grade nomenclature denoted by HC and EC) delivers casing with a higher collapse rating than similar API grades.

Applications – Exploration Wells Slim Well Designs Deep and High Pressure (HPHT) Wells Deep Water Risers Sour Service Environments High Reliability Standards

High Collapse with Enhanced Burst Casing

Vallourec High Collapse with Enhanced Burst Casing (grade nomenclature denoted by HCE) offers the ultimate in tubular performance by delivering increased burst and collapse ratings over similar API grades.

Applications – Exploration Wells Slim Well Designs High Reliability Standards Increased Fracture Pressures

VAM® Riser

VAM® Riser grades were developed for the high fatigue conditions experienced in top tension riser systems. Riser grades area available in 95ksi to 125ksi yield strengths. They were developed with an API 5CT PSL2 level as a basis with enhancements to improve riser fatigue usage.

These include: Chemistry Manufacturing Route Hardness Impact Toughness CTOD Performance Microstructure Control Sulfide Stress Cracking Resistance (for sour service grades) Dimensional Control Non-Destructive Inspection and Testing.

Sour Service Casing

Vallourec Sour Service Casing (grade nomenclature denoted by S, SS and MS) offers resistance to the most corro-sive sour environments conf i rmed by extensive NACE testing (H2S). This includes full compliance with NACE MR0175 requirements. Chemistry, production route, quench and tempering process, hardness and microstructure are all optimized to improve the performance of these grades in sour service environ-ments.

Applications – Deep and High Pressure (HPHT) Wells Exploration Wheels Sour Service Environments Mild Sour Environments Available in combination with Enhanced, High Collapse and Enhanced High Collapse grades.

13 and S13 Chrome

Vallourec 13 and S13 Chrome Casing (grade nomenclature denoted by 13Cr and S13Cr) offers resistance to the most corrosive sweet environments (CO2). Available in strengths ranging from 80ksi up to 125ksi, these grades are developed for your specific corrosive environment.

Applications – Deep and High Pressure (HPHT) Wells Exploration Wheels Sweet Environments Tubing and Casing Sizes

Corrosion Resistant Alloys

Vallourec Corrosion Resistant Alloys offer resistance to the most corrosive environ-ments that contain both CO2 and H2S by providing longer life and overall savings in total well cost.

Applications – Deep and High Pressure (HPHT) Wells Exploration Wheels Sour Service Environments Sweet Environments

THERMOCASE® VIT

The primary purpose of THERMOCASE® VIT is to dramatically reduce heat transfer via convection, conduction and radiation between inner and outer tubes.

THERMOCASE® VIT is a high perfor-mance double-wall insulated tubing using a durable Gettered Vacuum MLI (Multi Layer Insulation) System.

THERMOCASE® VIT is the highest per-formance, most durable and reliable insulation solution available for a wide range of environments and applications on the market today.

Applications includeThermal Wells, Steam Injection, SAGD, CSSFlow Assurance - Wax, paraffin, hydrates, …Well Integrity - APB, natural hydrates, permafrostInnovative Applications

ConfigurationsSeveral models - 100, 300, 700 and 900 series - with customization options - Slim, Preload, Upset, R2, R3, Coupling Insulator. All threads possible, API, Semi Premium, Premium.

THERMOCASE® Model 750

THERMOCASE® is a registered trade-mark of Vallourec Tube-Alloy, LLC

Vallourec Drilling Products USA:One Stop Shop for All Drilling Products from the Rig Floor to the BHA

Vallourec USA Corporation / Premium Products / pg. 13

Vallourec Tube-Alloy: Pioneer and world class leader

For more than 45 years, Vallourec Tube-Alloy has served the Oil & Gas industry as a leading service provider of specialized tubular accessories, engineered prod-ucts and premium threading.

Our commitment is to provide the highest quality products and services for the best value with the newest technology. With a global industrial and commercial foot-print, Vallourec Tube-Alloy is present in all the major Oil & Gas hubs worldwide with a strong focus on Operators and Service Companies.

Vallourec offers the following standard product lines:

Drill Pipe2-3/8” to 6-5/8” OD, Range 2 and 3

Heavy Weight2-7/8” to 6-5/8” OD, welded or integral

Drill Collars2-7/8” to 14” OD, slick or spiral

Products for Offshore Environments Casing landing strings Completion landing string (forged integral design, 6-5/8" and above) Drill pipe risers

API and High-Performance Connections API connections VAM EIS®: API compatible high-torque connections VAM® CDS™: compatible with API and certain other double-shoulder connections VAM® Express™ and VAM® X-Force™: proprietary high-torque connections VAM® Express-M2M™ and VAM® DPR HP™: proprietary gas-tight drill pipe riser connections

Premium Threading ServicesLicenses: VAM®

Atlas Bradford API Other Premium connections

Base Pipe VAM® In-Line Connection Well Coordination Built to Print Manufacturing

Certifications: ISO 9001:2008 ISO 14001:2004 OSHA 18001:1999 API Q1, 5CT, 14L

Products and Services

Tubing and Casing Accessories Crossover Coupling Pup Joint Nipple Surface Equipment Waterbushing Circulating Head OCTG / Hammer Union Lifting Equipment Drift Mandrel Completion Accessories / Equipment Flow Coupling Flo-pup®

Blast Joint Landing Nipple Wireline Re-Entry Guide Mule Shoe Bull Plug Testing Plug/Test Cap


Steel GradesAPI, Sour Service, high strength, arctic conditions, and non-mag material grades.

Drill Stem AccessoriesSafety valves (RDCV, Kelly Cocks, I-BOP), valve repair kits, pup joints, crossovers, bit subs, lifting subs, saver subs, pump-in subs, side entry subs, and circulating subs.

Hole Cleaning Technology Hydroclean® drill pipe Hydroclean® heavy weight drill pipe

Vallourec is more than a manufacturer of drilling tubulars, supplying a complete range of proprietary drill stem products. We also design and provide tailor-made solutions to help clients succeed in increasingly challenging well profiles and drilling programs.

Premium Services


Vallourec USA Corporation / Premium Services / pg. 15

Premium Services

Services for a Demanding Industry

The Vallourec Group of companies offers a comprehensive range of innovative services and solutions in addition to premium oil and gas products. These solutions are designed to meet a wide range of needs, from education and technical support to field and repair services.

We partner with a network of select distributors for inventory management, rig preparation, and rig returns.

Premium Services

Vallourec USA Corporation / Premium Services / pg. 17

Accessories Management

Vallourec Tube-Alloy offers a full range of tubing and casing accessories that delivers enhanced performance and production, including couplings, pup joints, and a variety of connectors. Many of these products are available from stock in a wide array of sizes and styles, while others are made to order. From the simplest J-55 API coupling to exotics such as an Inconel Premium Landing Nipple, Vallourec Tube-Alloy is the lead-ing source for all accessory products.

Vallourec Tube-Alloy’s global stocking program provides products to all corners of the globe while assuring customers of timely, reliable delivery of quality products every time.

Vallourec Tube-Alloy is able to provide products that meet or exceed customers’ expectations by continually producing new innovations that save time and money. A perfect example is the Flo-Pup®, which combines a pup joint and flow coupling into one unit, reducing the number of threads, makeups and potential leak paths.

pg. 16 / Vallourec USA Corporation / Premium Services

Education

Qualify your team with best in class education on tubular products from conception to completion. Vallourec’s Expert Instructors have high level content to choose from to offer tailor-made programs lasting anywhere from 2 to 5 days. Classes are offered in

Manufacturing Well Design Well Integrity Corrosion Running and Handling Premium Connections Cost Optimization Safer Operations

In addition, participants of our most popular class, Tubular Essentials, will be given the chance to tour our rolling mill located in Youngstown, Ohio as they learn about the pipe manufacturing process.

Well Design

Optimize your well design and enhance your well integrity. Our Technical group can help your business with material selection, conventional / unconventional casing design and advanced casing design using our knowledge in

Pipe and material manufacturing Corrosion (CO2 & H2S) HP/HT & deepwater R&D support VAM® premium connections

If brought in early in the design process we help lower costs, increase safety fac-tors, optimize annular clearance, and choose the best connections for the application.

Technical Support

A dedicated offer for your most demand-ing applications. Vallourec has dedicated R&D and test capacities for

Materials Corrosion Testing Connections Connection Qualification FEA Simulations

In addition, our group optimizes grades / connections for any environment.

Shale HP/HT Deepwater Corrosion High torque Riser

Vallourec’s global network of VAM® technical experts and 24/7 access to www.vamservices.com and [email protected] for questions answered within one business day will help the job get done when it counts.

Premium Connections

pg. 18 / Vallourec USA Corporation / Premium Services

Field Service

VAM® Field Service technicians, com-prising more than 225 field specialists located around the world, ensure VAM® Premium Connections are used safely in accordance with VAM® Field Procedures and avoid any deviation that could be detrimental to well life. VAM® Field Service adapts to your requirements and maintains pipe integrity across the supply chain with:

Rig-Ready/Rig-Return Pipe inspections Supply chain and pipe yard support VAM® Make-up supervision at the rig site Knowledge, training and tools required to perform field repair Full range of rental service equipment such as stabbing guides, lift plugs and crossover subs for safety valves and circulating heads VAM® Assembly make-up supervision and other specific services

In addition to VAM® Premium Connection running experience, VAM® Field Service has accumulated over 32 years of valuable experience in many drilling and completion core competency areas including:

Liner and hanger installations 13Cr and CRA completions HP/HT wells Shale Gas and Tight Gas wells Risers Glass re-enforced epoxy lined tubulars Slim wells (GRE) Solid expandable tubulars Wireline strings requiring orientated couplings

Please remember that only VAM® service personnel have been properly trained to inspect, repair and run VAM® Premium Connections.

Repair Services

Ensure unique quality standards world-wide for VAM® thread manufacturing and make-up. Any shop in the VAM® network licensed to cut or repair threads goes through regular audits to maintain quality. At the customer’s request a Licensor Technical Representative (LTR) can be assigned to an order to keep watch of specific jobs. This translates into an assurance of quality and well integrity anytime VAM® threads are used on tubing, casing, and accessories.

Premium Connections

Vallourec USA Corporation / Premium Connections / pg. 19

World Leader for Premium Connections

Vallourec, through its affiliates VAM USA, Vallourec Canada and Vallourec Mexico, offers the full range of VAM® products in North America. VAM®, the world leader for premium connection solutions for the oil and gas industry, benefits from a worldwide footprint of production facili-ties, three leading edge Research & Development Technology centers and a network of over 200 licensees worldwide. Vallourec, in combination with VAM USA, offers its customers integrated solutions and services fully adapted to the require-ments of a fast moving energy market.

VAM USA: an R&D Technology Center dedicated to North America

The newly industrialized VAM USA R&D Technology Center, located in Houston, Texas, encompasses an extensive array of testing equipment used to simulate extreme well conditions. The North America R&D center validates the quality and reliability of VAM® connections under field-like conditions per standard ISO 13679 procedures and special custom-er procedures. In addition to qualifica-tion tests for customers, the lab actively participates in the development of new connections and the validation of new products.

Premium Connections


CONNECTIONVAM® 21

TYPEThreaded and Coupled

SIZE RANGE3 1/2” to 14”

APPLICATIONS - Production casing - Intermediate casing - Rotating liner - Rotation during cementation - Wells with extreme compression loads

BENEFITS - Excellent gas-tight sealing under combined loads - Reversed angle torque shoulder provides excellent resistance to bending, compression and torque - Seal protected from rough handling - Reduced drilling wear susceptibility - Extreme compression and torque resistance

RATINGS- ISO 13679 TESTEDInternal Pressure100%

External Pressure100%

Tension (% of Pipe Body)100%

Compression (% of Pipe Body)100%

OPTIONSHT – High TorqueCLEANWELL® DRYSB – Special BevelSC – Special Clearance

CONNECTIONVAM TOP®



APPLICATIONS - Production casing and tubing - Tie-backs - Intermediate casing - Rotating liner - Rotation during cementation - Wells with extreme compression loads

BENEFITS - Excellent gas-tight sealing under combined loads - Reversed angle torque shoulder provides excellent resistance to bending, compression and torque - Thread geometry optimized by size to minimize the risk of galling - Connection options allow for greater torque and compression

RATINGSInternal Pressure100%



Compression (% of Pipe Body)Tubing 100%Casing 60% - 100%

OPTIONSHC – High CompressionHT – High TorqueSB – Special BevelSC – Special ClearanceCLEANWELL® DRY

Threaded and Coupled

pg. 20 / Vallourec USA Corporation / Premium Connections

The quest to find and recover new oil and gas reserves has never been more challenging. As these well conditions become more difficult, VAM® is ever more committed to designing connec-tions suited for a variety of conditions including:

Elevated Temperature Extreme Temperature fluctuations (Steam Injection or SAGD) High Pressure / High Temperature (HPHT) Sour Service Extreme Frac Pressures High Torque Fatigue Loading Severe Dog legs

Your Challenge - Our Commitment

VAM Premium Connections are used in the most hostile environments and applications. Operator safety, well life, return on investment (onshore and off-shore) rely on the quality of our prod-ucts. Therefore, the performance of all VAM connections are validated through full scale physical testing at one of our three R&D centers to fully respond to those requirements.

Sample Preparation

A critical component for the development and validation of new products is sample preparation. VAM USA has incorporated the latest FEA equipment, CNC lathes and gauges within the testing facility to produce test specimens to the highest tolerances representing the worst case scenarios in the field.

Make and Break

VAM USA can perform make up and break out simulations that validate the seal sensitivity and galling sensitivity of VAM® premium connections under criti-cal conditions. VAM USA also uses the tongs to evaluate the dope sensitivity of VAM® premium connections to new formulas of thread compound required by our customers including environmental friendly “green dope” or “CLEANWELL™”.

Combined Loads (tension and compression with internal and external pressure)

The VAM USA load frames have a maximum tension capacity of 6 million pound force and a maximum compression capacity of 5.2 million pound force. VAM USA has the ability to simulate combined loads (tension or compression) under high internal pressure (30,000 psi using gas and 35,000 psi using water) or external pressure (35,000 psi).

Bending

VAM USA has testing equipment that can simulate combined loads with bending (up to 70 degrees per 100ft).

Elevated Temperature

VAM USA can perform all simulations at ambient or elevated temperature (up to 600°F) including thermal cycles (ambient to elevated temperature).

Fatigue Life

VAM USA can perform fatigue tests that are required to assess the fatigue life of any VAM® premium connection (high stresses / low cycles or low stresses / high cycles).

These extensive testing standards provide assurance to our North American customers that our premium connections have been physically tested beyond their stated capabilities and secure VAM® as the premier premium connection provider worldwide.

The most important investment you can make to ensure the successful running of your premium tubulars is a VAM® Field Service representative.

VAM USA Connection Technology Center:A comprehensive range of e quipment


CONNECTIONDWC/C DWC/C IS PLUS


SIZE RANGE3 1/2" to 13 3/8”

APPLICATIONS - Drilling with casing - Production casing - Tubing

BENEFITS - Pin-to-pin torque shoulder - Excellent torque, compression and bending resistance - Improved thread sealing compared to buttress - Fatigue enhancements for drilling through a dogleg




Compression (% of Pipe Body)Up to 100%

OPTIONSHT – High TorqueIS – Internal ShoulderSR – Seal RingPLUS – Larger Coupling

CONNECTIONVAM® EDGE SF

TYPESemi Flush

SIZE RANGE5” to 5 1/2”

APPLICATIONS - Drilling / reaming with casing - Rotation during cementation - Production casing, tie backs and liners - Wells with extreme torque needs - Extended reach drilling - Horizontal / long lateral wells - Oil and gas shale wells

BENEFITS - Excellent gas-tight sealing under combined loads at maximum torque - Dovetail variable width threads for extreme torque - High bending capacity - High clearance semi-flush design - Simple, reliable and easy running

RATINGSInternal Pressure100% (70% with gas)


Tension (% of Pipe Body)Up to 82%

Compression (% of Pipe Body)Up to 82%

Threaded and Coupled


CONNECTIONVAM® HP


SIZE RANGE7” to 11”

APPLICATIONS - Heavy wall casing for HPHT - Production liners - Tie-backs - Casing hangers

BENEFITS - Dual gas-tight metal-to-metal seals - Reversed angle torque shoulder provides excellent resistance to bending, compression and torque RATINGSInternal Pressure100%


Tension (% of Pipe Body)80% - 100%


OPTIONSSB – Special BevelSC – Special Clearance

CONNECTIONVAM® HTTCTM


SIZE RANGE3 1/2” to 9 5/8"

APPLICATIONS - Drilling / reaming with casing - Rotation during cementation - Production casing, tie backs and liners - Wells with extreme torque needs - Extended reach drilling - Horizontal / long lateral wells BENEFITS - Excellent gas-tight sealing under combined loads at maximum torque - Dovetail variable width threads for extreme torque - High bending capacity - Fast make up - Simple, reliable and easy running

RATINGS - API RP 5C5:2017 CAL IV TESTEDInternal Pressure 100%

External Pressure 100%


Compression (% of Pipe Body)80% (100% uniaxial compression)

OPTIONSSB – Special BevelSC – Special Clearance


CONNECTIONVAM® HTF

TYPEFlush

SIZE RANGE4 1/2” to 9 7/8”

APPLICATIONS - Drilling liners - Drilling with casing - Production liners - Rotation during cementation BENEFITS - Dual gas-tight metal-to-metal seals - Maximum clearance – OD flush with the pipe - Dovetail thread form for extremely high torque capacity




Compression (% of Pipe Body)35% - 40%

CONNECTIONVAM® BOLT

TYPEFlush


APPLICATIONS - Surface casing with tight clearance requirements - Ideal for running inside Big Bore wellhead systems

BENEFITS - Dual gas-tight metal-to-metal seals - Dovetail thread form for excellent jump-out resistance - Twin-lead thread for quick makeup - Flush OD - External torque shoulder





Flush


CONNECTIONVAM® SG

TYPESemi Flush

SIZE RANGE4 1/2" to 5 1/2”

APPLICATIONS - Production casing - Highly deviated wells - Long laterals BENEFITS - Specifically tested for Shale Well design applications - Gas-tight metal seal protected by mid-shoulder from handling damage - Deep stabbing two-step thread RATINGSInternal Pressure100%




CONNECTIONVAM® SLIJ-II

TYPESemi Flush


APPLICATIONS - Production casing - Intermediate casing - Drilling liners - Drilling with casing - Tie-backs

BENEFITS - Optimized clearance with high tensile efficiency - Dual gas-tight metal-to-metal seals - Expanded box (2-3% over nominal pipe OD) - Deep stabbing two-step thread RATINGSInternal Pressure100%




Semi-Flush


CONNECTIONVAM TOP® FETM



APPLICATIONS - Drilling riser - Inner production riser

BENEFITS - VAM TOP® basis - Dovetail thread form for - Gas tight internal metal to metal seal - Rectangular thread profile - Fatigue enhancements - Swoosh - Radius on thread profile - SAF ≤ 2.0 vs. DNV-B1 2005 curve

PERFORMANCESStaticVAM TOP® basis5 ~ 10 Make and Break

Internal Pressure100%

External Pressure 100% API

Tension (% of Pipe Body) 100%


Special Applications

CONNECTIONVAM® SWI


SIZE RANGE4 1/2” to 13 3/8”

APPLICATIONS - Thermal wells - SAGD (Steam Assisted Gravity Drainage) - Other steam applications

BENEFITS - Gas tight seal under most severe conditions - Excellent in heating and cooling cycles - High torque rating - Enhanced make up characteristics - Validated with full scale thermal testing to industry recognized test protocols





Thermal Riser


CONNECTIONST-LTM

TYPEFlush


APPLICATIONS - Drilling liners - Moderate depth casing - Tight hole tubing strings - Tie-backs BENEFITS - Dual gas-tight metal-to-metal seals - Twin-lead thread for fast makeup - Maximum clearance – OD flush with the pipe RATINGSInternal Pressure100%




CONNECTIONHD-L®

TYPEFlush


APPLICATIONS - Drilling liners - Moderate depth casing - Tight hole tubing strings - Tie-backs - Deviated wells with severe compression and bending

BENEFITS - Dual gas-tight metal-to-metal seals - Single external metal seal above 14” - Maximum clearance – OD flush with the pipe - High compression rating RATINGSInternal Pressure100%




Flush

Vallourec USA Corporation / Premium Connections / pg. 29pg. 28 / Vallourec USA Corporation / Premium Connections

CONNECTIONVAM® TTR



APPLICATIONS - Outer production riser - Single barrier systems BENEFITS - External metal to metal seal - High fatigue triangular thread profile - SAF ≤ 1.5 vs. DNV-B1 2005 curve - Gas tight internal metal to metal seal PERFORMANCESInternal Pressure100%

External Pressure100% API


Compression (% of Pipe Body)30 - 40%

OPTIONSHW - Heavy Wall

CONNECTIONVAM® LDR


SIZE RANGEAvailable in 7 5/8” – other sizes are available upon request

APPLICATIONS - Workover / Landing string / Completion - HPHT

BENEFITS - External metal to metal seal - High fatigue triangular thread profile - SAF ≤ 1.5 vs. DNV-B1 2005 curve - Gas tight internal metal to metal seal - 25 Make and Breaks for work over applications PERFORMANCES25 Make and Breaks for workover applications

Internal Pressure100%

External Pressure100% API



Riser

Material Properties


Vallourec USA Corporation / Material Properties / pg. 31

Material Properties

Vallourec supplies the full range of API 5CT standard grades and grades with enhanced performances.All Product Specification Levels (PSL) and Special Requirements (SR) from API 5CT/ISO 11960 can be delivered, with PSL 2standardized on all quenched and tempered grades.

a N80 Type 1 and N80Q (heat treated with additional criteria) are both available with the same strength requirements and load ratings. Contact Vallourec Sales for additional information.

b Mild Sour Service material tested in a fit for purpose solution at 90% AYS using NACE method A.

Grade HRCYield Strength (ksi) Tensile Strength (ksi)minimum minimummaximum

J55 55 80 75 -K55 55 80 95 -VST55 HC 70 110 110 -N80 a 80 110 100 -L80 80 95 95 ≤ 23.0L80 HC 80 95 95 ≤ 23.0L80 HCE 87.5 95 95 ≤ 23.0L80 IRP 80 95 95 ≤ 23.0L80 1Cr 80 95 95 ≤ 23.0C90 90 105 100 ≤ 25.4C90 HC 90 105 100 ≤ 25.4R95 95 110 105 -T95 95 110 105 ≤ 25.4T95 HC 95 110 105 ≤ 25.4T95 E 100 110 105 ≤ 25.4T95 HCE 100 110 105 ≤ 25.4C110 110 120 115 ≤ 30.0P110 MS b 110 125 125 ≤ 30.0P110 110 140 125 -P110 RY 110 125 125 -P110 EC 125 140 135 -P110 HCE 125 140 135 -Q125 125 150 135 -Q125 HC 125 150 135 -Q125 HCE 135 150 140 -

Material Properties

Vallourec USA Corporation / Material Properties / pg. 33

Sour Service Sour Service grades for tubing and casing are used in wells where H2S is present. The threshold stresses have been determined according to Method A of NACE TM0177 standard. Upon request sour service grades are also tested according to Method D (DCB test).

High Collapse and Sour Service High Collapse and Sour Service grades for casing are used in high pressure wells where H2S is present.

Grade HRC Threshold stress Collapse Yield Strength (ksi) Tensile Strength (ksi)minimum minimum minimum resistancemaximum

VM80HCS 80 95 95 ≤ 22 85% SMYSVM80HCSS 80 95 95 ≤ 22 90% SMYSVM90HCS 90 105 100 ≤ 24 85% SMYSVM90HCSS 90 105 100 ≤ 24 90% SMYSVM95HCS 95 110 105 ≤ 25 85% SMYSVM95HCSS 95 110 105 ≤ 25 90% SMYSVM110HCSS 110 120 115 ≤ 30 85% SMYSVM125HCSS 125 135 130 ≤ 36 85% SMYS

minimum guaranteed

collapse pressuresare available upon request

Grade HRC Threshold stressYield Strength (ksi) Tensile Strength (ksi)minimum minimum minimummaximum

VM80S 80 95 95 ≤ 22 85% SMYSVM80SS 80 95 95 ≤ 22 90% SMYSVM90S 90 105 100 ≤ 24 85% SMYSVM90SS 90 105 100 ≤ 24 90% SMYSVM95S 95 110 105 ≤ 25 85% SMYSVM95SS 95 110 105 ≤ 25 90% SMYSVM100SS 100 115 110 ≤ 28 85% SMYSVM110SS 110 120 115 ≤ 30 85% SMYSVM125SS 125 135 130 ≤ 34 85% SMYS (0.03 ppH2S, pH 3.5)

S Grades for faster delivery.

pg. 32 / Vallourec USA Corporation / Material Properties

Vallourec Proprietary Grades Vallourec proprietary grades offer solutions for grades or requirements not covered by API 5CT. They also offer greater performances (e.g. High Collapse grades) and higher reliability (e.g. Sour Service grades) thanks to stringent internal requirements in quality and process control, mechanical properties and material testing.

High Pressure High Temperature HPHT grades are used when high strength is required with limited resistance to sour service conditions within the guidelines of NACE MR0175.

Grade HRC Operating temp. for use in sourservice conditions acc. to NACE

Yield Strength (ksi) Tensile Strength (ksi)minimum minimummaximum

VM125CY 125 140 135 ≤ 35 175°FVM130CY 130 140 135 ≤ 35 175°FVM140CY 140 150 145 ≤ 36 225°F

Deep Well Deep well grades are used where high yield strength is required while maintaining ductility and fracture toughness.

Grade CVN average value min. full size specimen at 70°F


VM140 140 165 150 38 ft-lbsVM150 150 175 160 30 ft-lbs

Grade Collapse resistance


VM80HC 80 110 100 VM95HC 95 125 110 VM110HC 110 140 125 VM125HC 125 150 135VM140HC 140 165 150VM150HC 150 175 160VM125HYHC 140 150 145

High Collapse High Collapse grades for casing are used in high pressure wells. They offer an average of 25% and up to 40% extra performance over API collapse rating. As mechanical properties and pipe dimensions are major factors in collapse resistance, the following parameters have been optimized to guarantee high collapse pressure: D/t ratio, yield strength, ovality, wall thickness, residual stresses.

minimum guaranteedcollapse pressures

are available upon request

Material Properties

Vallourec USA Corporation / Material Properties / pg. 35pg. 34 / Vallourec USA Corporation / Material Properties

Special Applications

Risers Riser grades from 95 ksi to 125 ksi minimum yield strength are used in high fatigue riser applications (available with Sour Service resistance).

Grade HRC Threshold stressYield Strength (ksi) Tensile Strength (ksi)minimum minimum minimummaximum

VM95R 95 110 105 ≤ 33 N/AVM95RSS 95 110 105 ≤ 27 80% SMYSVM110R 110 125 120 ≤ 35 N/AVM110RSS 110 120 115 ≤ 32 80% SMYSVM125R 125 140 135 ≤ 37 N/A

Expandables Expandable grades from 50 ksi to 80 ksi minimum yield strength are used in expandable tubular applications.

Grade Elongation 2”%

HRCYield Strength ksi

Ultimate Tensile Strengthksi

minimum minimum minimummaximum

VM50ET 50 65 69 25 25VM80ET 80 95 95 20 20VM80 13ET 80 95 95 18 18

Sweet Corrosion Martensitic grades (13Cr and Super 13Cr) are used in wells with CO2, chlorides and/or some H2S up to 365°F.

Type Grade HRCYield Strength (ksi) Tensile Strength (ksi)minimum minimummaximum

VM80 13CR 80 95 95 ≤ 2313% Chrome VM85 13CR 85 100 100 ≤ 24 VM90 13CR 90 105 100 ≤ 26 VM95 13CR 95 110 105 ≤ 28 VM95 13CRSS 95 110 105 ≤ 30Super 13% Chrome VM110 13CRSS 110 140 115 ≤ 34 VM125 13CRSS 125 140 130 ≤ 34

Highly Corrosive Ferritic-austenitic grades to be used in wells with CO2, chlorides and/or some H2S up to 480°F.


VM22 110 110 140 115 ≤ 36Duplex VM22 125 125 150 130 ≤ 37 VM22 140 140 160 145 ≤ 38 VM25 110 110 140 125 ≤ 36Super VM25 125 125 150 130 ≤ 37Duplex VM25 140 140 160 145 ≤ 38 VM25S 125 125 150 130 ≤ 37 VM25S 140 140 160 145 ≤ 38

Austenitic grades are used in wells where high concentration of H2S, CO2, and chlorides are present.


Super Austenitic VM28 110 110 140 115 ≤ 35 VM28 125 125 150 130 ≤ 37 VM825 110 110 135 115 ≤ 35 VM825 120 120 145 125 ≤ 37Nickel Base Alloys VM G3 110 110 130 115 ≤ 35 VM G3 125 125 145 130 ≤ 37 VM G50 110 110 130 115 ≤ 35 VM G50 125 125 145 130 ≤ 37

Material Properties

pg. 36 / Vallourec USA Corporation / Material Properties

Performance Data Tubing

Tubing Dimensions and Minimum Performance Properties

Vallourec USA Corporation / Performance Data / pg. 37

J55 8,100 7,700 7,600 8,250 7,880 72 7,700 49 7,700 72 K55 8,100 7,700 7,600 8,250 9,980 72 7,700 49 7,700 72 N80 11,780 11,200 11,060 12,000 10,630 104 11,200 72 11,200 104 L80 11,780 11,200 11,060 12,000 12,250 104 11,200 72 11,200 104 C90 13,250 12,600 12,440 13,500 12,960 117 12,600 81 12,600 117 R95 13,980 13,300 13,140 14,250 13,610 124 13,300 85 13,300 124 T95 13,980 13,300 13,140 14,250 13,640 124 13,300 85 13,300 124 P110 16,130 15,400 15,210 16,500 16,370 143 15,400 99 15,400 143 N80 15,280 14,970 14,640 15,640 14,470 135 14,970 103 14,850 135 L80 15,280 14,970 14,640 15,640 16,740 135 14,970 103 14,850 135 C90 17,190 16,840 16,470 17,590 17,710 152 16,840 116 16,710 152 R95 18,150 17,780 17,390 18,570 18,590 161 17,780 122 17,630 161 T95 18,150 17,780 17,390 18,570 18,640 161 17,780 122 17,630 161 P110 21,010 20,590 20,130 21,500 22,360 186 20,590 142 20,420 186 N80 17,410 17,390 16,870 17,860 17,010 154 - - - - L80 17,410 17,390 16,870 17,860 19,720 154 - - - - C90 19,580 19,560 18,980 20,090 20,860 173 - - - - R95 20,670 20,650 20,040 21,210 21,900 183 - - - - T95 20,670 20,650 20,040 21,210 21,960 183 - - - - P110 23,930 23,910 23,200 24,560 26,340 212 - - - - N80 19,430 19,810 19,050 20,000 19,600 172 - - 14,850 172 L80 19,430 19,810 19,050 20,000 22,790 172 - - 14,850 172 C90 21,860 22,280 21,430 22,500 24,100 194 - - 16,710 194 R95 23,080 23,520 22,620 23,750 25,310 204 - - 17,630 204 T95 23,080 23,520 22,620 23,750 25,370 204 - - 17,630 204 P110 26,720 27,230 26,190 27,500 30,430 237 - - 20,420 237 J55 7,680 7,260 7,180 7,820 7,410 100 7,260 73 7,260 100 K55 7,680 7,260 7,180 7,820 9,390 100 7,260 73 7,260 100 N80 11,170 10,570 10,450 11,370 10,000 145 10,570 106 10,570 145 L80 11,170 10,570 10,450 11,370 11,520 145 10,570 106 10,570 145 C90 12,380 11,890 11,760 12,790 12,190 163 11,890 119 11,890 163 R95 12,940 12,550 12,410 13,500 12,790 172 12,550 125 12,550 172 T95 12,940 12,550 12,410 13,500 12,830 172 12,550 125 12,550 172 P110 14,550 14,530 14,370 15,630 15,380 199 14,530 145 14,530 199 N80 13,890 13,440 13,200 14,190 12,900 180 13,440 141 13,440 180 L80 13,890 13,440 13,200 14,190 14,890 180 13,440 141 13,440 180

Abbreviated TermsNU non-upset tubingEU external upset tubingALT. alternate driftIP internal pressurePBYS pipe body yield strength

4.60 4.70 4.44 0.190 1.304 1.901 N/A

5.80 5.95 5.76 0.254 1.692 1.773 N/A

6.60 - 6.56 0.295 1.928 1.691 N/A

7.35 7.45 7.32 0.336 2.152 1.609 N/A

6.40 6.50 6.17 0.217 1.812 2.347 N/A

7.80 7.90 7.67 0.276 2.254 2.229 N/A

2 3/8

2 7/8

ODConnectionsPipe Body

Grade

DriftWall AreaWeightCollapsePressure

IP(Barlow)

PBYS Non Upset (NU) Upset 8rd (EU)

(psi)(in)(in) (in) (in)(in2)(lb/ft)

NUT&C

EUT&C

PE API ALT.

(psi) (psi) (psi) (psi)

IP IP

(psi) (psi)(kips) (kips) (kips)

IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

Strength

Performance Data Tubing


Vallourec USA Corporation / Performance Data / pg. 39

T95 7,310 9,390 9,340 10,290 9,460 255 9,390 171 - - P110 7,910 10,880 10,810 11,910 11,350 295 10,880 198 - - J55 6,590 6,300 6,250 6,850 6,390 169 - - 6,300 169 N80 8,800 9,170 9,090 9,960 8,620 246 - - 9,170 246 L80 8,800 9,170 9,090 9,960 9,920 246 - - 9,170 246 C90 9,590 10,320 10,230 11,200 10,490 277 - - 10,320 277 R95 9,980 10,890 10,800 11,830 11,020 292 - - 10,890 292 T95 9,980 10,890 10,800 11,830 11,040 292 - - 10,890 292 P110 11,060 12,610 12,500 13,690 13,250 338 - - 12,610 338 N80 12,110 11,550 11,400 12,350 10,990 304 - - - - L80 12,110 11,550 11,400 12,350 12,660 304 - - - - C90 13,620 12,990 12,820 13,890 13,390 342 - - - - R95 14,380 13,720 13,530 14,660 14,060 361 - - - - T95 14,380 13,720 13,530 14,660 14,100 361 - - - - P110 16,650 15,880 15,670 16,980 16,910 419 - - - - J55 5,730 5,800 5,760 6,330 5,850 198 5,800 144 5,800 198 K55 5,730 5,800 5,760 6,330 7,410 198 5,800 144 5,800 198 N80 7,500 8,430 8,370 9,200 7,900 288 8,430 209 8,430 288 L80 7,500 8,430 8,370 9,200 9,080 288 8,430 209 8,430 288 C90 8,120 9,490 9,420 10,350 9,610 324 9,490 235 9,490 324 R95 8,410 10,010 9,940 10,930 10,090 342 10,010 248 10,010 342 T95 8,410 10,010 9,940 10,930 10,110 342 10,010 248 10,010 342 P110 9,210 11,590 11,510 12,650 12,130 396 11,590 287 11,590 396 N80 11,080 10,480 10,370 11,290 9,920 353 - - - - L80 11,080 10,480 10,370 11,290 11,420 353 - - - - C90 12,220 11,800 11,670 12,700 12,080 397 - - - - R95 12,760 12,450 12,310 13,400 12,690 419 - - - - T95 12,760 12,450 12,310 13,400 12,720 419 - - - - P110 14,340 14,420 14,260 15,520 15,260 485 - - - -

10.70 11.00 10.47 0.262 3.077 3.351 N/A

13.20 - 12.95 0.330 3.805 3.215 N/A

12.60 12.75 12.25 0.271 3.600 3.833 N/A

15.20 - 15.00 0.337 4.407 3.701 N/A

9.50 - 9.12 0.226 2.680 3.423 N/A

4

4 1/2



Grade


IP(Barlow)



NUT&C

EUT&C

PE API ALT.


IP IP


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

Strength

pg. 38 / Vallourec USA Corporation / Performance Data


C90 15,620 15,120 14,850 15,960 15,760 203 15,120 158 15,120 203 R95 16,490 15,960 15,680 16,840 16,540 214 15,960 167 15,960 214 T95 16,490 15,960 15,680 16,840 16,580 214 15,960 167 15,960 214 P110 19,090 18,480 18,150 19,500 19,890 248 18,480 194 18,480 248 N80 15,300 15,000 14,670 15,660 14,500 199 15,000 159 14,940 199 L80 15,300 15,000 14,670 15,660 16,770 199 15,000 159 14,940 199 C90 17,220 16,870 16,500 17,620 17,740 224 16,870 179 16,810 224 R95 18,170 17,810 17,420 18,600 18,630 236 17,810 189 17,750 236 T95 18,170 17,810 17,420 18,600 18,680 236 17,810 189 17,750 236 P110 21,040 20,620 20,170 21,540 22,400 273 20,620 219 20,550 273 J55 7,400 6,990 6,910 7,540 7,110 142 6,990 109 6,990 142 K55 7,400 6,990 6,910 7,540 9,010 142 6,990 109 6,990 142 N80 10,540 10,160 10,060 10,960 9,600 207 10,160 159 10,160 207 L80 10,540 10,160 10,060 10,960 11,050 207 10,160 159 10,160 207 C90 11,570 11,430 11,310 12,330 11,690 233 11,430 179 11,430 233 R95 12,080 12,070 11,940 13,020 12,270 246 12,070 189 12,070 246 T95 12,080 12,070 11,940 13,020 12,300 246 12,070 189 12,070 246 P110 13,530 13,970 13,830 15,070 14,760 285 13,970 219 13,970 285 N80 12,120 11,560 11,410 12,360 11,000 233 11,560 185 - - L80 12,120 11,560 11,410 12,360 12,670 233 11,560 185 - - C90 13,640 13,010 12,830 13,900 13,410 262 13,010 208 - - R95 14,390 13,730 13,550 14,670 14,080 277 13,730 220 - - T95 14,390 13,730 13,550 14,670 14,110 277 13,730 220 - - P110 16,670 15,900 15,690 16,990 16,930 321 15,900 255 - - N80 15,310 15,000 14,670 15,660 14,500 295 15,000 246 15,000 295 L80 15,310 15,000 14,670 15,660 16,770 295 15,000 246 15,000 295 C90 17,220 16,880 16,500 17,620 17,740 331 16,880 277 16,880 331 R95 18,180 17,810 17,420 18,600 18,630 350 17,810 293 17,810 350 T95 18,180 17,810 17,420 18,600 18,680 350 17,810 293 17,810 350 P110 21,050 20,630 20,170 21,540 22,400 405 20,630 339 20,630 405 J55 5,110 5,440 5,400 5,960 5,480 147 5,440 99 - - K55 5,110 5,440 5,400 5,960 6,940 147 5,440 99 - - N80 6,590 7,910 7,860 8,660 7,400 214 7,910 144 - - L80 6,590 7,910 7,860 8,660 8,490 214 7,910 144 - - C90 7,080 8,900 8,840 9,740 8,990 241 8,900 162 - - R95 7,310 9,390 9,340 10,290 9,440 255 9,390 171 - -


7.80 7.90 7.67 0.276 2.254 2.229 N/A

8.60 8.70 8.45 0.308 2.484 2.165 N/A

9.20 9.30 8.81 0.254 2.590 2.867 N/A

10.20 - 9.92 0.289 2.915 2.797 N/A

12.70 12.95 12.53 0.375 3.682 2.625 N/A

9.50 - 9.12 0.226 2.680 3.423 N/A

2 7/8

3 1/2

4


Grade


IP(Barlow)



NUT&C

EUT&C

PE API ALT.


IP IP


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

Strength

Performance Data4 1/2” - 7”


pg. 40 / Vallourec USA Corporation / Performance Data

Vallourec USA Corporation / Performance Data 4 1/2” -7” / pg. 41

Abbreviated TermsSC short round thread casingLC long round thread casingBC buttress thread casingALT. alternative driftIP internal pressurePBYS pipe body yield strength

ConnectionsPipe Body

Grade

OD Area DriftWallWeightIP

(Barlow)CollapsePressure

PBYS 8rd LC8rd SC BC

(psi) (psi) (psi) (psi) (psi)(in)(in) (in) (in)(in2)(lb/ft)

PET&C API ALT.

(kips) (psi)(psi) (psi)(kips)(kips) (kips)

IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

4 1/2 9.50 9.41 0.205 2.766 3.965 N/A

4 1/2 10.50 10.24 0.224 3.009 3.927 N/A

4 1/2 11.60 11.36 0.250 3.338 3.875 N/A

4 1/2 12.75 12.25 0.271 3.600 3.833 N/A

J55 3,310 4,380 4,370 4,850 4,400 152 4,380 101 - - - -K55 3,310 4,380 4,370 4,850 5,570 152 4,380 112 - - - -J55 4,010 4,790 4,770 5,280 4,820 166 4,790 132 - - 4,790 203K55 4,010 4,790 4,770 5,280 6,100 166 4,790 146 - - 4,790 249J55 4,960 5,350 5,320 5,860 5,400 184 5,350 154 5,350 162 5,350 225K55 4,960 5,350 5,320 5,860 6,840 184 5,350 170 5,350 180 5,350 277N80 6,360 7,780 7,730 8,520 7,290 267 7,780 216 7,780 223 7,780 304L80 6,360 7,780 7,730 8,520 8,370 267 7,780 212 7,780 212 7,780 291L80 1Cr 6,360 7,780 7,730 8,520 8,370 267 7,780 212 7,780 212 7,780 291L80 HC 7,720 7,780 7,730 8,520 8,370 267 7,780 212 7,780 212 7,780 291L80 IRP 6,360 7,780 7,730 8,520 8,370 267 7,780 212 7,780 212 7,780 291L80 HCE 7,720 8,510 8,460 9,320 8,370 292 8,510 212 8,510 212 8,510 295C90 6,810 8,750 8,700 9,590 9,730 300 8,750 223 8,750 223 8,750 309R95 7,030 9,240 9,180 10,120 9,310 317 9,240 234 9,240 234 9,240 325T95 7,030 9,240 9,180 10,120 10,280 317 9,240 234 9,240 234 9,240 325T95 HC 8,550 9,240 9,180 10,120 10,280 317 9,240 234 9,240 234 9,240 325T95 E 7,030 9,720 9,660 10,660 10,280 334 9,720 234 9,720 234 9,720 328T95 HCE 8,550 9,720 9,660 10,660 10,280 334 9,720 234 9,720 234 9,720 328P110 7,580 10,690 10,630 11,720 12,320 367 10,690 279 10,690 279 10,690 385P110 RY 7,580 10,690 10,630 11,720 12,320 367 10,690 279 10,690 279 10,690 385P110 MS 7,580 10,690 10,630 11,720 11,150 367 10,690 279 10,690 279 10,690 385P110 EC 8,860 12,150 12,080 13,320 13,380 417 12,150 301 12,150 301 12,150 420P110 HCE 9,590 12,150 12,080 13,320 13,380 417 12,150 301 12,150 301 12,150 420C110 7,580 10,690 10,630 11,720 12,320 367 10,690 279 10,690 279 10,690 385Q125 8,000 12,150 12,080 13,320 13,380 417 12,150 301 12,150 301 12,150 420Q125 HC 9,870 12,150 12,080 13,320 13,380 417 12,150 301 12,150 301 12,150 420Q125 HCE 9,870 13,130 13,050 14,390 13,960 451 13,130 312 13,130 312 13,130 438N80 7,500 8,430 8,370 9,200 7,690 288 10,270 241 10,650 248 8,430 328L80 7,500 8,430 8,370 9,200 7,690 288 10,270 235 10,650 235 8,430 314L80 1Cr 7,500 8,430 8,370 9,200 7,690 288 10,270 235 10,650 235 8,430 314L80 IRP 7,500 8,430 8,370 9,200 7,690 288 10,270 235 10,650 235 8,430 314C90 8,120 9,490 9,420 10,350 10,540 324 11,560 248 11,980 248 9,490 334R95 8,410 10,010 9,940 10,930 11,140 342 12,200 260 12,650 260 10,010 351T95 8,410 10,010 9,940 10,930 11,140 342 12,200 260 12,650 260 10,010 351T95 E 8,690 10,540 10,460 11,500 11,140 360 12,840 260 13,310 260 10,540 354P110 9,210 11,590 11,510 12,650 13,340 396 14,130 310 14,640 310 11,590 416

Casing Dimensions and Minimum Performance Properties

Performance Data4 1/2" - 7"





Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

4 1/2 15.10 15.00 0.337 4.407 3.701 N/A

4 1/2 16.60 16.54 0.375 4.860 3.625 N/A

4 1/2 18.90 18.71 0.430 5.498 3.515 N/A

T95 E 12,760 13,110 12,960 14,110 14,100 441 - - 13,110 341 12,240 433T95 HCE 13,300 13,110 12,960 14,110 14,100 441 - - 13,110 341 12,240 433P110 14,340 14,420 14,260 15,520 16,880 485 - - 14,420 406 13,470 509P110 RY 14,340 14,420 14,260 15,520 16,880 485 - - 14,420 406 13,470 509P110 MS 14,340 14,420 14,260 15,520 16,880 485 - - 14,420 406 13,470 509P110 EC 15,830 16,380 16,200 17,640 18,350 551 - - 16,380 438 15,300 554P110 HCE 16,090 16,380 16,200 17,640 18,350 551 - - 16,380 438 15,300 554C110 14,340 14,420 14,260 15,520 15,530 485 - - 14,420 373 13,470 475Q125 15,830 16,380 16,200 17,640 18,350 551 - - 16,380 438 15,300 554Q125 HC 17,330 16,380 16,200 17,640 18,350 551 - - 16,380 438 15,300 554Q125 HCE 17,330 17,690 17,500 19,050 19,140 595 - - 17,690 454 16,530 578N80 12,220 11,670 11,510 12,460 11,130 389 - - - - - -L80 12,220 11,670 11,510 12,460 12,830 389 - - - - - -L80 1Cr 12,220 11,670 11,510 12,460 12,830 389 - - - - - -L80 HC 13,370 11,670 11,510 12,460 12,830 389 - - - - - -L80 IRP 12,220 11,670 11,510 12,460 12,830 389 - - - - - -L80 HCE 13,370 12,760 12,590 13,630 12,830 425 - - - - - -C90 13,750 13,130 12,950 14,020 14,960 437 - - - - - -R95 14,510 13,850 13,670 14,800 14,270 462 - - - - - -T95 14,510 13,850 13,670 14,800 15,800 462 - - - - - -T95 HC 15,280 13,850 13,670 14,800 15,800 462 - - - - - -T95 E 14,510 14,580 14,390 15,580 15,800 486 - - - - - -T95 HCE 15,280 14,580 14,390 15,580 15,800 486 - - - - - -P110 16,810 16,040 15,830 17,130 18,930 535 - - - - - -P110 RY 16,810 16,040 15,830 17,130 18,930 535 - - - - - -P110 MS 16,810 16,040 15,830 17,130 18,930 535 - - - - - -P110 EC 19,100 18,230 17,980 19,470 20,570 607 - - - - - -P110 HCE 19,100 18,230 17,980 19,470 20,570 607 - - - - - -C110 16,810 16,040 15,830 17,130 17,410 535 - - - - - -Q125 19,100 18,230 17,980 19,470 20,570 607 - - - - - -Q125 HC 20,510 18,230 17,980 19,470 20,570 607 - - - - - -Q125 HCE 20,510 19,690 19,420 21,030 21,460 656 - - - - - -N80 13,830 13,380 13,140 14,130 12,870 440 - - - - - -L80 13,830 13,380 13,140 14,130 14,860 440 - - - - - -L80 1Cr 13,830 13,380 13,140 14,130 14,860 440 - - - - - -L80 HC 15,170 13,380 13,140 14,130 14,860 440 - - - - - -


pg. 42 / Vallourec USA Corporation / Performance Data 4 1/2” -7”



Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

P110 RY 9,210 11,590 11,510 12,650 13,340 396 14,130 310 14,640 310 11,590 416P110 MS 9,210 11,590 11,510 12,650 13,340 396 14,130 310 14,640 310 11,590 416P110 EC 9,890 13,170 13,080 14,380 14,410 450 16,060 335 16,640 335 13,170 453C110 9,210 11,590 11,510 12,650 13,340 396 14,130 310 14,640 310 11,590 416Q125 9,890 13,170 13,080 14,380 14,410 450 16,060 335 16,640 335 13,170 453N80 8,540 9,020 8,950 9,810 8,500 307 - - 9,020 270 9,020 349L80 8,540 9,020 8,950 9,810 9,780 307 - - 9,020 257 9,020 334L80 1Cr 8,540 9,020 8,950 9,810 9,780 307 - - 9,020 257 9,020 334L80 HC 9,560 9,020 8,950 9,810 9,780 307 - - 9,020 257 9,020 334L80 IRP 8,540 9,020 8,950 9,810 9,780 307 - - 9,020 257 9,020 334L80 HCE 9,560 9,870 9,790 10,730 9,780 336 - - 9,870 257 9,870 339C90 9,300 10,150 10,070 11,030 11,380 345 - - 10,150 270 10,150 355R95 9,660 10,710 10,630 11,650 10,870 364 - - 10,710 284 10,710 374T95 9,660 10,710 10,630 11,650 12,020 364 - - 10,710 284 10,710 374T95 HC 10,850 10,710 10,630 11,650 12,020 364 - - 10,710 284 10,710 374T95 E 9,660 11,280 11,190 12,260 12,020 384 - - 11,280 284 11,280 377T95 HCE 10,850 11,280 11,190 12,260 12,020 384 - - 11,280 284 11,280 377P110 10,690 12,410 12,310 13,490 14,400 422 - - 12,410 338 12,410 443P110 RY 10,690 12,410 12,310 13,490 14,400 422 - - 12,410 338 12,410 443P110 MS 10,690 12,410 12,310 13,490 14,400 422 - - 12,410 338 12,410 443P110 EC 11,600 14,100 13,980 15,320 15,640 479 - - 14,100 365 14,100 482P110 HCE 12,840 14,100 13,980 15,320 15,640 479 - - 14,100 365 14,100 482C110 10,690 12,410 12,310 13,490 13,250 422 - - 12,410 311 12,410 413Q125 11,600 14,100 13,980 15,320 15,640 479 - - 14,100 365 14,100 482Q125 HC 13,810 14,100 13,980 15,320 15,640 479 - - 14,100 365 14,100 482Q125 HCE 13,810 15,230 15,100 16,550 16,320 518 - - 15,230 378 15,230 503N80 11,080 10,480 10,370 11,290 9,950 353 - - 10,480 325 9,790 401L80 11,080 10,480 10,370 11,290 11,450 353 - - 10,480 308 9,790 384L80 1Cr 11,080 10,480 10,370 11,290 11,450 353 - - 10,480 308 9,790 384L80 HC 11,950 10,480 10,370 11,290 11,450 353 - - 10,480 308 9,790 384L80 IRP 11,080 10,480 10,370 11,290 11,450 353 - - 10,480 308 9,790 384L80 HCE 11,950 11,470 11,340 12,350 11,450 386 - - 11,470 308 10,710 389C90 12,220 11,800 11,670 12,700 13,340 397 - - 11,800 325 11,020 408R95 12,760 12,450 12,310 13,400 12,740 419 - - 12,450 341 11,630 429T95 12,760 12,450 12,310 13,400 14,100 419 - - 12,450 341 11,630 429T95 HC 13,300 12,450 12,310 13,400 14,100 419 - - 12,450 341 11,630 429

4 1/2 12.75 12.25 0.271 3.600 3.833 N/A

4 1/2 13.50 13.05 0.290 3.836 3.795 N/A

4 1/2 15.10 15.00 0.337 4.407 3.701 N/A







Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

4 1/2 18.90 18.71 0.430 5.498 3.515 N/A

4 1/2 21.50 21.38 0.500 6.283 3.375 N/A



Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

5 15.00 14.88 0.296 4.374 4.283 N/A

4 1/2 21.50 21.38 0.500 6.283 3.375 N/A

5 18.00 17.95 0.362 5.275 4.151 N/A

L80 IRP 13,830 13,380 13,140 14,130 14,860 440 - - - - - -L80 HCE 15,170 14,630 14,370 15,450 14,860 481 - - - - - -C90 15,560 15,050 14,780 15,890 17,340 495 - - - - - -R95 16,420 15,890 15,610 16,770 16,520 522 - - - - - -T95 16,420 15,890 15,610 16,770 18,320 522 - - - - - -T95 HC 17,560 15,890 15,610 16,770 18,320 522 - - - - - -T95 E 16,420 16,720 16,430 17,660 18,320 550 - - - - - -T95 HCE 17,560 16,720 16,430 17,660 18,320 550 - - - - - -P110 19,010 18,390 18,070 19,420 21,940 605 - - - - - -P110 RY 19,010 18,390 18,070 19,420 21,940 605 - - - - - -P110 MS 19,010 18,390 18,070 19,420 21,940 605 - - - - - -P110 EC 21,610 20,900 20,530 22,070 23,840 687 - - - - - -P110 HCE 21,730 20,900 20,530 22,070 23,840 687 - - - - - -C110 19,010 18,390 18,070 19,420 20,190 605 - - - - - -Q125 21,610 20,900 20,530 22,070 23,840 687 - - - - - -Q125 HC 23,370 20,900 20,530 22,070 23,840 687 - - - - - -Q125 HCE 23,370 22,580 22,180 23,840 24,880 742 - - - - - -N80 15,800 15,560 15,180 16,180 15,120 503 - - - - - -L80 15,800 15,560 15,180 16,180 17,500 503 - - - - - -L80 1Cr 15,800 15,560 15,180 16,180 17,500 503 - - - - - -L80 HC 17,900 15,560 15,180 16,180 17,500 503 - - - - - -L80 IRP 15,800 15,560 15,180 16,180 17,500 503 - - - - - -L80 HCE 17,900 17,010 16,610 17,700 17,500 550 - - - - - -C90 17,780 17,500 17,080 18,210 20,450 565 - - - - - -R95 18,770 18,470 18,030 19,220 19,460 597 - - - - - -T95 18,770 18,470 18,030 19,220 21,600 597 - - - - - -T95 HC 20,750 18,470 18,030 19,220 21,600 597 - - - - - -T95 E 18,770 19,440 18,980 20,230 21,600 628 - - - - - -T95 HCE 20,750 19,440 18,980 20,230 21,600 628 - - - - - -P110 21,730 21,390 20,880 22,250 25,870 691 - - - - - -P110 RY 21,730 21,390 20,880 22,250 25,870 691 - - - - - -P110 MS 21,730 21,390 20,880 22,250 25,870 691 - - - - - -P110 EC 24,690 24,310 23,730 25,280 28,120 785 - - - - - -P110 HCE 25,700 24,310 23,730 25,280 28,120 785 - - - - - -C110 21,730 21,390 20,880 22,250 23,800 691 - - - - - -Q125 24,690 24,310 23,730 25,280 28,120 785 - - - - - -

Q125 HC 27,780 24,310 23,730 25,280 28,120 785 - - - - - -Q125 HCE 27,780 26,250 25,620 27,310 29,340 848 - - - - - -J55 5,560 5,700 5,660 6,220 5,770 241 5,700 207 5,700 223 5,700 293K55 5,560 5,700 5,660 6,220 7,300 241 5,700 228 5,700 246 5,700 359N80 7,250 8,290 8,230 9,050 7,780 350 8,290 291 8,290 311 8,290 396L80 7,250 8,290 8,230 9,050 8,940 350 8,290 286 8,290 295 8,290 379L80 1Cr 7,250 8,290 8,230 9,050 8,940 350 8,290 286 8,290 295 8,290 379L80 HC 8,510 8,290 8,230 9,050 8,940 350 8,290 286 8,290 295 8,290 379L80 IRP 7,250 8,290 8,230 9,050 8,940 350 8,290 286 8,290 295 8,290 379L80 HCE 8,510 9,070 9,000 9,900 8,940 383 9,070 295 9,070 295 9,070 385C90 7,830 9,320 9,260 10,190 10,400 394 9,320 311 9,320 311 9,320 404R95 8,110 9,840 9,780 10,750 9,950 416 9,840 326 9,840 326 9,840 424T95 8,110 9,840 9,780 10,750 10,990 416 9,840 326 9,840 326 9,840 424T95 HC 9,540 9,840 9,780 10,750 10,990 416 9,840 326 9,840 326 9,840 424T95 E 8,110 10,360 10,290 11,320 10,990 437 10,360 326 10,360 326 10,360 429T95 HCE 9,540 10,360 10,290 11,320 10,990 437 10,360 326 10,360 326 10,360 429P110 8,850 11,400 11,320 12,450 13,170 481 11,400 387 11,400 388 11,400 503P110 RY 8,850 11,400 11,320 12,450 13,170 481 11,400 387 11,400 388 11,400 503P110 MS 8,850 11,400 11,320 12,450 13,170 481 11,400 387 11,400 388 11,400 503P110 EC 9,480 12,950 12,860 14,150 14,310 547 12,950 420 12,950 420 12,950 548P110 HCE 10,970 12,950 12,860 14,150 14,310 547 12,950 420 12,950 420 12,950 548Q125 9,480 12,950 12,860 14,150 14,310 547 12,950 420 12,950 420 12,950 548Q125 HC 11,400 12,950 12,860 14,150 14,310 547 12,950 420 12,950 420 12,950 548Q125 HCE 11,400 13,990 13,890 15,280 14,930 591 13,990 435 13,990 435 13,990 573N80 10,500 10,140 10,030 10,940 9,600 422 - - 10,140 396 9,910 477L80 10,500 10,140 10,030 10,940 11,050 422 - - 10,140 376 9,910 457L80 1Cr 10,500 10,140 10,030 10,940 11,050 422 - - 10,140 376 9,910 457L80 HC 11,400 10,140 10,030 10,940 11,050 422 - - 10,140 376 9,910 457L80 IRP 10,500 10,140 10,030 10,940 11,050 422 - - 10,140 376 9,910 457L80 HCE 11,400 11,090 10,970 11,960 11,050 462 - - 11,090 376 10,840 465C90 11,520 11,400 11,290 12,310 12,870 475 - - 11,400 396 11,150 487R95 12,020 12,040 11,910 12,990 12,290 501 - - 12,040 416 11,770 512T95 12,020 12,040 11,910 12,990 13,600 501 - - 12,040 416 11,770 512T95 HC 12,670 12,040 11,910 12,990 13,600 501 - - 12,040 416 11,770 512T95 E 12,020 12,670 12,540 13,670 13,600 527 - - 12,670 416 12,390 517T95 HCE 12,670 12,670 12,540 13,670 13,600 527 - - 12,670 416 12,390 517







Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

5 18.00 17.95 0.362 5.275 4.151 N/A

5 21.40 21.32 0.437 6.264 4.001 N/A

5 23.20 23.11 0.478 6.791 3.919 N/A



Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

5 23.20 23.11 0.478 6.791 3.919 N/A

5 24.10 24.05 0.500 7.069 3.875 N/A

P110 13,470 13,940 13,800 15,040 16,290 580 - - 13,940 495 13,630 606P110 RY 13,470 13,940 13,800 15,040 16,290 580 - - 13,940 495 13,630 606P110 MS 13,470 13,940 13,800 15,040 16,290 580 - - 13,940 495 13,630 606P110 EC 14,820 15,840 15,680 17,090 17,700 659 - - 15,840 535 15,490 661P110 HCE 15,360 15,840 15,680 17,090 17,700 659 - - 15,840 535 15,490 661C110 13,470 13,940 13,800 15,040 14,980 580 - - 13,940 456 13,630 566Q125 14,820 15,840 15,680 17,090 17,700 659 - - 15,840 535 15,490 661Q125 HC 15,670 15,840 15,680 17,090 17,700 659 - - 15,840 535 15,490 661Q125 HCE 15,670 17,100 16,930 18,460 18,470 712 - - 15,990 555 16,730 691N80 12,760 12,240 12,060 13,020 11,710 501 - - 10,810 490 9,910 537L80 12,760 12,240 12,060 13,020 13,500 501 - - 10,810 466 9,910 510L80 1Cr 12,760 12,240 12,060 13,020 13,500 501 - - 10,810 466 9,910 510L80 HC 13,960 12,240 12,060 13,020 13,500 501 - - 10,810 466 9,910 510L80 IRP 12,760 12,240 12,060 13,020 13,500 501 - - 10,810 466 9,910 510L80 HCE 13,960 13,380 13,190 14,240 13,500 548 - - 11,830 466 10,840 510C90 14,360 13,770 13,560 14,650 15,740 564 - - 12,170 490 11,150 537R95 15,150 14,530 14,320 15,460 15,010 595 - - 12,840 515 11,770 564T95 15,150 14,530 14,320 15,460 16,630 595 - - 12,840 515 11,770 564T95 HC 15,950 14,530 14,320 15,460 16,630 595 - - 12,840 515 11,770 564T95 E 15,150 15,300 15,070 16,270 16,630 626 - - 13,520 515 12,390 564T95 HCE 15,950 15,300 15,070 16,270 16,630 626 - - 13,520 515 12,390 564P110 17,550 16,820 16,580 17,900 19,920 689 - - 14,870 613 13,630 671P110 RY 17,550 16,820 16,580 17,900 19,920 689 - - 14,870 613 13,630 671P110 MS 17,550 16,820 16,580 17,900 19,920 689 - - 14,870 613 13,630 671P110 EC 19,940 19,120 18,840 20,340 21,650 783 - - 15,990 662 15,490 725P110 HCE 20,100 19,120 18,840 20,340 21,650 783 - - 15,990 662 15,490 725C110 17,550 16,820 16,580 17,900 18,330 689 - - 14,870 564 13,630 617Q125 19,940 19,120 18,840 20,340 21,650 783 - - 15,990 662 15,490 725Q125 HC 21,540 19,120 18,840 20,340 21,650 783 - - 15,990 662 15,490 725Q125 HCE 21,540 20,650 20,340 21,970 22,590 846 - - 15,990 686 16,730 752N80 13,830 13,380 13,150 14,130 12,870 543 - - 10,810 540 9,910 537L80 13,830 13,380 13,150 14,130 14,870 543 - - 10,810 513 9,910 510L80 1Cr 13,830 13,380 13,150 14,130 14,870 543 - - 10,810 513 9,910 510L80 HC 15,130 13,380 13,150 14,130 14,870 543 - - 10,810 513 9,910 510L80 IRP 13,830 13,380 13,150 14,130 14,870 543 - - 10,810 513 9,910 510L80 HCE 15,130 14,640 14,380 15,460 14,870 594 - - 11,830 513 10,840 510

C90 15,560 15,060 14,790 15,900 17,350 611 - - 12,170 540 11,150 537R95 16,430 15,890 15,610 16,780 16,530 645 - - 12,840 567 11,770 564T95 16,430 15,890 15,610 16,780 18,330 645 - - 12,840 567 11,770 564T95 HC 17,570 15,890 15,610 16,780 18,330 645 - - 12,840 567 11,770 564T95 E 16,430 16,730 16,430 17,660 18,330 679 - - 13,520 567 12,390 564T95 HCE 17,570 16,730 16,430 17,660 18,330 679 - - 13,520 567 12,390 564P110 19,020 18,400 18,080 19,430 21,950 747 - - 14,870 675 13,630 671P110 RY 19,020 18,400 18,080 19,430 21,950 747 - - 14,870 675 13,630 671P110 MS 19,020 18,400 18,080 19,430 21,950 747 - - 14,870 675 13,630 671P110 EC 21,840 20,910 20,540 22,080 23,860 849 - - 15,990 729 15,490 725P110 HCE 22,340 20,910 20,540 22,080 23,860 849 - - 15,990 729 15,490 725C110 19,020 18,400 18,080 19,430 20,200 747 - - 14,870 621 13,630 617Q125 21,620 20,910 20,540 22,080 23,860 849 - - 15,990 729 15,490 725Q125 HC 23,340 20,910 20,540 22,080 23,860 849 - - 15,990 729 15,490 725Q125 HCE 23,340 22,590 22,190 23,850 24,890 917 - - 15,990 756 16,730 752N80 14,400 14,000 13,730 14,720 13,510 565 - - 10,810 567 9,910 537L80 14,400 14,000 13,730 14,720 15,610 565 - - 10,810 538 9,910 510L80 1Cr 14,400 14,000 13,730 14,720 15,610 565 - - 10,810 538 9,910 510L80 HC 15,750 14,000 13,730 14,720 15,610 565 - - 10,810 538 9,910 510L80 IRP 14,400 14,000 13,730 14,720 15,610 565 - - 10,810 538 9,910 510L80 HCE 15,750 15,310 15,020 16,100 15,610 619 - - 11,830 538 10,840 510C90 16,200 15,750 15,450 16,560 18,220 636 - - 12,170 567 11,150 537R95 17,100 16,630 16,300 17,480 17,360 672 - - 12,840 595 11,770 564T95 17,100 16,630 16,300 17,480 19,250 672 - - 12,840 595 11,770 564T95 HC 18,470 16,630 16,300 17,480 19,250 672 - - 12,840 595 11,770 564T95 E 17,100 17,500 17,160 18,400 19,250 707 - - 13,520 595 12,390 564T95 HCE 18,470 17,500 17,160 18,400 19,250 707 - - 13,520 595 12,390 564P110 19,800 19,250 18,880 20,240 23,050 778 - - 14,870 708 13,630 671P110 RY 19,800 19,250 18,880 20,240 23,050 778 - - 14,870 708 13,630 671P110 MS 19,800 19,250 18,880 20,240 23,050 778 - - 14,870 708 13,630 671P110 EC 22,500 21,880 21,450 23,000 25,050 884 - - 15,990 765 15,490 725P110 HCE 23,140 21,880 21,450 23,000 25,050 884 - - 15,990 765 15,490 725C110 19,800 19,250 18,880 20,240 21,210 778 - - 14,870 652 13,630 617Q125 22,500 21,880 21,450 23,000 25,050 884 - - 15,990 765 15,490 725Q125 HC 24,300 21,880 21,450 23,000 25,050 884 - - 15,990 765 15,490 725Q125 HCE 24,300 23,630 23,170 24,840 26,140 954 - - 15,990 793 16,730 752







Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

5 1/2 17.00 16.89 0.304 4.962 4.767 N/A

5 1/2 15.50 15.36 0.275 4.514 4.825 N/A

5 1/2 20.00 19.83 0.361 5.828 4.653 N/A



Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

5 1/2 23.00 22.56 0.415 6.630 4.545 N/A

5 1/2 26.00 25.56 0.476 7.513 4.423 N/A

J55 4,040 4,810 4,790 5,300 4,840 248 4,810 202 4,810 217 4,810 300K55 4,040 4,810 4,790 5,300 6,130 248 4,810 222 4,810 239 4,810 366J55 4,910 5,320 5,290 5,830 5,370 273 5,320 229 5,320 247 5,320 329K55 4,910 5,320 5,290 5,830 6,800 273 5,320 252 5,320 272 5,320 402N80 6,290 7,740 7,690 8,480 7,250 397 7,740 323 7,740 348 7,740 446L80 6,290 7,740 7,690 8,480 8,320 397 7,740 317 7,740 338 7,740 428L80 1Cr 6,290 7,740 7,690 8,480 8,320 397 7,740 317 7,740 338 7,740 428L80 HC 6,630 7,740 7,690 8,480 8,320 397 7,740 317 7,740 338 7,740 428L80 IRP 6,290 7,740 7,690 8,480 8,320 397 7,740 317 7,740 338 7,740 428L80 HCE 6,630 8,460 8,410 9,280 8,320 434 8,460 337 8,460 338 8,460 436C90 6,730 8,710 8,650 9,540 9,680 447 8,710 349 8,710 356 8,710 456R95 6,940 9,190 9,130 10,070 9,260 471 9,190 368 9,190 374 9,190 480T95 6,940 9,190 9,130 10,070 10,230 471 9,190 368 9,190 374 9,190 480T95 HC 8,470 9,190 9,130 10,070 10,230 471 9,190 368 9,190 374 9,190 480T95 E 6,940 9,670 9,620 10,600 10,230 496 9,670 374 9,670 374 9,670 485T95 HCE 8,470 9,670 9,620 10,600 10,230 496 9,670 374 9,670 374 9,670 485P110 7,480 10,640 10,580 11,660 12,250 546 10,640 430 10,640 445 10,640 568P110 RY 7,480 10,640 10,580 11,660 12,250 546 10,640 430 10,640 445 10,640 568P110 MS 7,480 10,640 10,580 11,660 12,250 546 10,640 430 10,640 445 10,640 568P110 EC 8,840 12,090 12,020 13,260 13,310 620 12,090 481 12,090 481 12,090 620P110 HCE 9,040 12,090 12,020 13,260 13,310 620 12,090 481 12,090 481 12,090 620Q125 7,890 12,090 12,020 13,260 13,310 620 12,090 481 12,090 481 12,090 620Q125 HC 9,110 12,090 12,020 13,260 13,310 620 12,090 481 12,090 481 12,090 620Q125 HCE 9,110 13,060 12,980 14,320 13,890 670 13,060 498 13,060 498 13,060 648N80 8,830 9,190 9,110 9,980 8,670 466 - - 9,190 428 8,990 524L80 8,830 9,190 9,110 9,980 9,970 466 - - 9,190 416 8,990 503L80 1Cr 8,830 9,190 9,110 9,980 9,970 466 - - 9,190 416 8,990 503L80 HC 9,850 9,190 9,110 9,980 9,970 466 - - 9,190 416 8,990 503L80 IRP 8,830 9,190 9,110 9,980 9,970 466 - - 9,190 416 8,990 503L80 HCE 9,850 10,050 9,970 10,910 9,970 510 - - 10,050 416 9,830 512C90 9,630 10,340 10,250 11,230 11,600 525 - - 10,340 438 10,120 536R95 10,020 10,910 10,820 11,850 11,080 554 - - 10,910 460 10,680 563T95 10,020 10,910 10,820 11,850 12,250 554 - - 10,910 460 10,680 563T95 HC 11,130 10,910 10,820 11,850 12,250 554 - - 10,910 460 10,680 563T95 E 10,020 11,490 11,390 12,470 12,250 583 - - 11,490 460 11,240 569T95 HCE 11,130 11,490 11,390 12,470 12,250 583 - - 11,490 460 11,240 569

P110 11,110 12,640 12,530 13,720 14,680 641 - - 12,640 548 12,360 667P110 RY 11,110 12,640 12,530 13,720 14,680 641 - - 12,640 548 12,360 667P110 MS 11,110 12,640 12,530 13,720 14,680 641 - - 12,640 548 12,360 667P110 EC 12,090 14,360 14,240 15,590 15,950 729 - - 13,160 592 14,050 728P110 HCE 12,440 14,360 14,240 15,590 15,950 729 - - 13,160 592 14,050 728C110 11,110 12,640 12,530 13,720 13,500 641 - - 12,640 504 12,360 624Q125 12,090 14,360 14,240 15,590 15,950 729 - - 13,160 592 14,050 728Q125 HC 13,320 14,360 14,240 15,590 15,950 729 - - 13,160 592 14,050 728Q125 HCE 13,320 15,510 15,380 16,840 16,640 787 - - 13,160 614 15,180 761N80 11,160 10,560 10,450 11,370 10,030 530 - - 9,870 502 8,990 580L80 11,160 10,560 10,450 11,370 11,550 530 - - 9,870 489 8,990 551L80 1Cr 11,160 10,560 10,450 11,370 11,550 530 - - 9,870 489 8,990 551L80 HC 12,210 10,560 10,450 11,370 11,550 530 - - 9,870 489 8,990 551L80 IRP 11,160 10,560 10,450 11,370 11,550 530 - - 9,870 489 8,990 551L80 HCE 12,210 11,550 11,430 12,430 11,550 580 - - 10,800 489 9,830 551C90 12,380 11,880 11,750 12,790 13,450 597 - - 11,110 514 10,120 580R95 12,930 12,540 12,410 13,500 12,840 630 - - 11,730 540 10,680 609T95 12,930 12,540 12,410 13,500 14,210 630 - - 11,730 540 10,680 609T95 HC 13,480 12,540 12,410 13,500 14,210 630 - - 11,730 540 10,680 609T95 E 12,930 13,200 13,060 14,210 14,210 663 - - 12,340 540 11,240 609T95 HCE 13,480 13,200 13,060 14,210 14,210 663 - - 12,340 540 11,240 609P110 14,540 14,530 14,360 15,630 17,020 729 - - 13,160 643 12,360 725P110 RY 14,540 14,530 14,360 15,630 17,020 729 - - 13,160 643 12,360 725P110 MS 14,540 14,530 14,360 15,630 17,020 729 - - 13,160 643 12,360 725P110 EC 16,220 16,510 16,320 17,760 18,490 829 - - 13,160 694 14,050 783P110 HCE 16,460 16,510 16,320 17,760 18,490 829 - - 13,160 694 14,050 783C110 14,540 14,530 14,360 15,630 15,660 729 - - 13,160 592 12,360 667Q125 16,060 16,510 16,320 17,760 18,490 829 - - 13,160 694 14,050 783Q125 HC 17,610 16,510 16,320 17,760 18,490 829 - - 13,160 694 14,050 783Q125 HCE 17,610 17,830 17,630 19,180 19,300 895 - - 13,160 720 15,180 812N80 12,650 12,120 11,940 12,900 11,590 601 - - - - - -L80 12,650 12,120 11,940 12,900 13,360 601 - - - - - -L80 1Cr 12,650 12,120 11,940 12,900 13,360 601 - - - - - -L80 HC 13,830 12,120 11,940 12,900 13,360 601 - - - - - -L80 IRP 12,650 12,120 11,940 12,900 13,360 601 - - - - - -L80 HCE 13,830 13,250 13,060 14,110 13,360 657 - - - - - -

5 1/2 20.00 19.83 0.361 5.828 4.653 N/A







Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP



Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

5 1/2 29.70 29.67 0.562 8.718 4.251 N/A

5 1/2 32.60 32.57 0.625 9.572 4.125 N/A

C90 14,230 13,630 13,430 14,520 15,580 676 - - - - - -R95 15,020 14,390 14,180 15,320 14,860 714 - - - - - -T95 15,020 14,390 14,180 15,320 16,460 714 - - - - - -T95 HC 15,810 14,390 14,180 15,320 16,460 714 - - - - - -T95 E 15,020 15,150 14,930 16,130 16,460 751 - - - - - -T95 HCE 15,810 15,150 14,930 16,130 16,460 751 - - - - - -P110 17,390 16,660 16,420 17,740 19,710 826 - - - - - -P110 RY 17,390 16,660 16,420 17,740 19,710 826 - - - - - -P110 MS 17,390 16,660 16,420 17,740 19,710 826 - - - - - -P110 EC 19,760 18,930 18,660 20,160 21,420 939 - - - - - -P110 HCE 20,160 18,930 18,660 20,160 21,420 939 - - - - - -C110 17,390 16,660 16,420 17,740 18,140 826 - - - - - -Q125 19,760 18,930 18,660 20,160 21,420 939 - - - - - -Q125 HC 21,340 18,930 18,660 20,160 21,420 939 - - - - - -Q125 HCE 21,340 20,450 20,150 21,770 22,350 1,014 - - - - - -N80 13,220 12,730 12,520 13,500 12,200 628 - - - - - -L80 13,220 12,730 12,520 13,500 14,080 628 - - - - - -L80 1Cr 13,220 12,730 12,520 13,500 14,080 628 - - - - - -L80 HC 14,460 12,730 12,520 13,500 14,080 628 - - - - - -L80 IRP 13,220 12,730 12,520 13,500 14,080 628 - - - - - -L80 HCE 14,460 13,920 13,700 14,760 14,080 687 - - - - - -C90 14,880 14,320 14,090 15,190 16,430 707 - - - - - -R95 15,700 15,110 14,870 16,030 15,660 746 - - - - - -T95 15,700 15,110 14,870 16,030 17,360 746 - - - - - -T95 HC 16,600 15,110 14,870 16,030 17,360 746 - - - - - -T95 E 15,700 15,910 15,650 16,870 17,360 785 - - - - - -T95 HCE 16,600 15,910 15,650 16,870 17,360 785 - - - - - -P110 18,180 17,500 17,220 18,560 20,790 864 - - - - - -P110 RY 18,180 17,500 17,220 18,560 20,790 864 - - - - - -P110 MS 18,180 17,500 17,220 18,560 20,790 864 - - - - - -P110 EC 20,660 19,890 19,570 21,090 22,590 982 - - - - - -P110 HCE 21,060 19,890 19,570 21,090 22,590 982 - - - - - -C110 18,180 17,500 17,220 18,560 19,130 864 - - - - - -Q125 20,660 19,890 19,570 21,090 22,590 982 - - - - - -Q125 HC 22,310 19,890 19,570 21,090 22,590 982 - - - - - -Q125 HCE 22,310 21,480 21,130 22,780 23,570 1,060 - - - - - -

N80 14,680 14,310 14,020 15,010 13,820 697 - - - - - -L80 14,680 14,310 14,020 15,010 15,970 697 - - - - - -L80 1Cr 14,680 14,310 14,020 15,010 15,970 697 - - - - - -L80 HC 16,050 14,310 14,020 15,010 15,970 697 - - - - - -L80 IRP 14,680 14,310 14,020 15,010 15,970 697 - - - - - -L80 HCE 16,050 15,650 15,330 16,420 15,970 763 - - - - - -C90 16,510 16,090 15,770 16,890 18,650 785 - - - - - -R95 17,430 16,990 16,640 17,820 17,770 828 - - - - - -T95 17,430 16,990 16,640 17,820 19,710 828 - - - - - -T95 HC 18,920 16,990 16,640 17,820 19,710 828 - - - - - -T95 E 17,430 17,880 17,520 18,760 19,710 872 - - - - - -T95 HCE 18,920 17,880 17,520 18,760 19,710 872 - - - - - -P110 20,180 19,670 19,270 20,640 23,600 959 - - - - - -P110 RY 20,180 19,670 19,270 20,640 23,600 959 - - - - - -P110 MS 20,180 19,670 19,270 20,640 23,600 959 - - - - - -P110 EC 22,940 22,350 21,900 23,450 25,650 1,090 - - - - - -P110 HCE 23,340 22,350 21,900 23,450 25,650 1,090 - - - - - -C110 20,180 19,670 19,270 20,640 21,720 959 - - - - - -Q125 22,940 22,350 21,900 23,450 25,650 1,090 - - - - - -Q125 HC 25,260 22,350 21,900 23,450 25,650 1,090 - - - - - -Q125 HCE 25,260 24,140 23,650 25,330 26,760 1,177 - - - - - -N80 16,120 15,910 15,510 16,510 15,490 766 - - - - - -L80 16,120 15,910 15,510 16,510 17,930 766 - - - - - -L80 1Cr 16,120 15,910 15,510 16,510 17,930 766 - - - - - -L80 HC 18,340 15,910 15,510 16,510 17,930 766 - - - - - -L80 IRP 16,120 15,910 15,510 16,510 17,930 766 - - - - - -L80 HCE 18,340 17,400 16,970 18,060 17,930 838 - - - - - -C90 18,130 17,900 17,450 18,570 20,960 861 - - - - - -R95 19,140 18,890 18,420 19,610 19,940 909 - - - - - -T95 19,140 18,890 18,420 19,610 22,140 909 - - - - - -T95 HC 21,270 18,890 18,420 19,610 22,140 909 - - - - - -T95 E 19,140 19,890 19,390 20,640 22,140 957 - - - - - -T95 HCE 21,270 19,890 19,390 20,640 22,140 957 - - - - - -P110 22,160 21,880 21,330 22,700 26,520 1,053 - - - - - -P110 RY 22,160 21,880 21,330 22,700 26,520 1,053 - - - - - -P110 MS 22,160 21,880 21,330 22,700 26,520 1,053 - - - - - -

5 1/2 26.80 26.73 0.500 7.854 4.375 N/A

5 1/2 26.00 25.56 0.476 7.513 4.423 N/A







Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP



Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

6 5/8 28.00 27.67 0.417 8.133 5.666 N/A

P110 EC 25,180 24,860 24,240 25,800 28,820 1,197 - - - - - -P110 HCE 25,580 24,860 24,240 25,800 28,820 1,197 - - - - - -C110 22,160 21,880 21,330 22,700 24,400 1,053 - - - - - -Q125 25,180 24,860 24,240 25,800 28,820 1,197 - - - - - -Q125 HC 28,490 24,860 24,240 25,800 28,820 1,197 - - - - - -Q125 HCE 28,490 26,850 26,180 27,860 30,070 1,292 - - - - - -N80 17,490 17,490 16,960 17,950 17,160 831 - - - - - -L80 17,490 17,490 16,960 17,950 19,890 831 - - - - - -L80 1Cr 17,490 17,490 16,960 17,950 19,890 831 - - - - - -L80 HC 20,320 17,490 16,960 17,950 19,890 831 - - - - - -L80 IRP 17,490 17,490 16,960 17,950 19,890 831 - - - - - -L80 HCE 20,320 19,130 18,550 19,630 19,890 909 - - - - - -C90 19,680 19,670 19,080 20,190 23,280 935 - - - - - -R95 20,770 20,770 20,140 21,320 22,120 987 - - - - - -T95 20,770 20,770 20,140 21,320 24,590 987 - - - - - -T95 HC 23,580 20,770 20,140 21,320 24,590 987 - - - - - -T95 E 20,770 21,860 21,200 22,440 24,590 1,039 - - - - - -T95 HCE 23,580 21,860 21,200 22,440 24,590 1,039 - - - - - -P110 24,050 24,050 23,320 24,680 29,460 1,143 - - - - - -P110 RY 24,050 24,050 23,320 24,680 29,460 1,143 - - - - - -P110 MS 24,050 24,050 23,320 24,680 29,460 1,143 - - - - - -P110 EC 27,330 27,320 26,500 28,050 32,010 1,298 - - - - - -P110 HCE 27,730 27,320 26,500 28,050 32,010 1,298 - - - - - -C110 24,050 24,050 23,320 24,680 27,100 1,143 - - - - - -Q125 27,330 27,320 26,500 28,050 32,010 1,298 - - - - - -Q125 HC 31,650 27,320 26,500 28,050 32,010 1,298 - - - - - -Q125 HCE 31,650 29,510 28,620 30,290 33,400 1,402 - - - - - -J55 4,560 5,110 5,090 5,620 5,160 382 5,110 314 5,110 340 5,110 453K55 4,560 5,110 5,090 5,620 6,530 382 5,110 342 5,110 372 5,110 548N80 5,760 7,440 7,400 8,170 6,960 555 7,440 443 7,440 481 7,440 615L80 5,760 7,440 7,400 8,170 7,990 555 7,440 436 7,440 473 7,440 592L80 1Cr 5,760 7,440 7,400 8,170 7,990 555 7,440 436 7,440 473 7,440 592L80 HC 7,170 7,440 7,400 8,170 7,990 555 7,440 436 7,440 473 7,440 592L80 IRP 5,760 7,440 7,400 8,170 7,990 555 7,440 436 7,440 473 7,440 592L80 HCE 7,170 8,140 8,090 8,940 7,990 607 8,140 464 8,140 494 8,140 604C90 6,140 8,370 8,320 9,190 9,290 624 8,370 481 8,370 520 8,370 633

R95 6,310 8,830 8,780 9,700 8,880 659 8,830 507 8,830 546 8,830 665T95 6,310 8,830 8,780 9,700 9,810 659 8,830 507 8,830 546 8,830 665T95 HC 7,850 8,830 8,780 9,700 9,810 659 8,830 507 8,830 546 8,830 665T95 E 6,310 9,300 9,250 10,210 9,810 694 9,300 526 9,300 546 9,300 674T95 HCE 7,850 9,300 9,250 10,210 9,810 694 9,300 526 9,300 546 9,300 674P110 6,730 10,230 10,170 11,230 11,750 763 10,230 592 10,230 641 10,230 786P110 RY 6,730 10,230 10,170 11,230 11,750 763 10,230 592 10,230 641 10,230 786P110 MS 6,730 10,230 10,170 11,230 11,750 763 10,230 592 10,230 641 10,230 786P110 EC 7,580 11,620 11,560 12,770 12,770 867 11,620 662 11,620 702 11,620 860P110 HCE 7,980 11,620 11,560 12,770 12,770 867 11,620 662 11,620 702 11,620 860C110 6,730 10,230 10,170 11,230 10,810 763 10,230 577 10,230 598 10,230 739Q125 7,020 11,620 11,560 12,770 12,770 867 11,620 662 11,620 702 11,620 860Q125 HC 8,850 11,620 11,560 12,770 12,770 867 11,620 662 11,620 702 11,620 860Q125 HCE 8,850 12,550 12,480 13,790 13,330 936 11,820 707 11,820 728 12,550 901J55 6,170 6,060 6,010 6,600 6,150 447 - - 6,060 415 6,060 531K55 6,170 6,060 6,010 6,600 7,790 447 - - 6,060 454 6,060 643N80 8,170 8,810 8,740 9,590 8,300 651 - - 8,810 586 8,810 721L80 8,170 8,810 8,740 9,590 9,540 651 - - 8,810 576 8,810 693L80 1Cr 8,170 8,810 8,740 9,590 9,540 651 - - 8,810 576 8,810 693L80 HC 9,260 8,810 8,740 9,590 9,540 651 - - 8,810 576 8,810 693L80 IRP 8,170 8,810 8,740 9,590 9,540 651 - - 8,810 576 8,810 693L80 HCE 9,260 9,640 9,560 10,490 9,540 712 - - 9,640 602 9,640 709C90 8,880 9,910 9,840 10,790 11,100 732 - - 9,910 633 9,910 742R95 9,220 10,460 10,380 11,390 10,610 773 - - 10,460 665 10,460 780T95 9,220 10,460 10,380 11,390 11,720 773 - - 10,460 665 10,460 780T95 HC 10,490 10,460 10,380 11,390 11,720 773 - - 10,460 665 10,460 780T95 E 9,220 11,020 10,930 11,990 11,720 813 - - 11,020 665 11,020 790T95 HCE 10,490 11,020 10,930 11,990 11,720 813 - - 11,020 665 11,020 790P110 10,160 12,120 12,020 13,190 14,040 895 - - 11,820 781 12,120 922P110 RY 10,160 12,120 12,020 13,190 14,040 895 - - 11,820 781 12,120 922P110 MS 10,160 12,120 12,020 13,190 14,040 895 - - 11,820 781 12,120 922P110 EC 11,000 13,770 13,660 14,990 15,260 1,017 - - 11,820 855 13,770 1,008P110 HCE 11,400 13,770 13,660 14,990 15,260 1,017 - - 11,820 855 13,770 1,008C110 10,160 12,120 12,020 13,190 12,920 895 - - 11,820 728 12,120 866Q125 11,000 13,770 13,660 14,990 15,260 1,017 - - 11,820 855 13,770 1,008Q125 HC 12,920 13,770 13,660 14,990 15,260 1,017 - - 11,820 855 13,770 1,008

5 1/2 35.70 35.35 0.687 10.388 4.001 N/A

6 5/8 24.00 23.60 0.352 6.937 5.796 N/A

6 5/8 24.00 23.60 0.352 6.937 5.796 N/A

5 1/2 32.60 32.57 0.625 9.572 4.125 N/A







Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

6 5/8 35.00 34.23 0.525 10.061 5.450 N/A



Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

7 26.00 25.69 0.362 7.549 6.151 N/A

Q125 HCE 12,920 14,870 14,760 16,190 15,920 1,098 - - 11,820 887 14,780 1,057N80 10,320 10,040 9,940 10,840 9,500 734 - - 10,040 678 9,810 814L80 10,320 10,040 9,940 10,840 10,940 734 - - 10,040 666 9,810 783L80 1Cr 10,320 10,040 9,940 10,840 10,940 734 - - 10,040 666 9,810 783L80 HC 11,080 10,040 9,940 10,840 10,940 734 - - 10,040 666 9,810 783L80 IRP 10,320 10,040 9,940 10,840 10,940 734 - - 10,040 666 9,810 783L80 HCE 11,080 10,980 10,870 11,860 10,940 803 - - 10,980 696 10,730 800C90 11,330 11,290 11,180 12,190 12,740 826 - - 11,290 732 11,040 837R95 11,820 11,920 11,800 12,870 12,160 872 - - 11,820 769 11,660 880T95 11,820 11,920 11,800 12,870 13,460 872 - - 11,820 769 11,660 880T95 HC 12,520 11,920 11,800 12,870 13,460 872 - - 11,820 769 11,660 880T95 E 11,820 12,550 12,420 13,550 13,460 918 - - 11,820 769 12,270 891T95 HCE 12,520 12,550 12,420 13,550 13,460 918 - - 11,820 769 12,270 891P110 13,230 13,800 13,660 14,900 16,120 1,010 - - 11,820 904 13,500 1,040P110 RY 13,230 13,800 13,660 14,900 16,120 1,010 - - 11,820 904 13,500 1,040P110 MS 13,230 13,800 13,660 14,900 16,120 1,010 - - 11,820 904 13,500 1,040P110 EC 14,540 15,680 15,530 16,940 17,520 1,147 - - 11,820 989 14,780 1,138P110 HCE 14,940 15,680 15,530 16,940 17,520 1,147 - - 11,820 989 14,780 1,138C110 13,230 13,800 13,660 14,900 14,830 1,010 - - 11,820 842 13,500 977Q125 14,540 15,680 15,530 16,940 17,520 1,147 - - 11,820 989 14,780 1,138Q125 HC 15,800 15,680 15,530 16,940 17,520 1,147 - - 11,820 989 14,780 1,138Q125 HCE 15,800 16,940 16,770 18,290 18,280 1,239 - - 11,820 1,025 14,780 1,192N80 11,670 11,090 10,960 11,900 10,560 805 - - - - - -L80 11,670 11,090 10,960 11,900 12,160 805 - - - - - -L80 1Cr 11,670 11,090 10,960 11,900 12,160 805 - - - - - -L80 HC 12,770 11,090 10,960 11,900 12,160 805 - - - - - -L80 IRP 11,670 11,090 10,960 11,900 12,160 805 - - - - - -L80 HCE 12,770 12,130 11,990 13,010 12,160 880 - - - - - -C90 13,130 12,480 12,330 13,380 14,170 905 - - - - - -R95 13,860 13,170 13,010 14,130 13,530 956 - - - - - -T95 13,860 13,170 13,010 14,130 14,970 956 - - - - - -T95 HC 14,590 13,170 13,010 14,130 14,970 956 - - - - - -T95 E 13,860 13,870 13,700 14,870 14,970 1,006 - - - - - -T95 HCE 14,590 13,870 13,700 14,870 14,970 1,006 - - - - - -P110 15,870 15,250 15,070 16,360 17,930 1,107 - - - - - -P110 RY 15,870 15,250 15,070 16,360 17,930 1,107 - - - - - -

P110 MS 15,870 15,250 15,070 16,360 17,930 1,107 - - - - - -P110 EC 17,600 17,330 17,120 18,590 19,490 1,258 - - - - - -P110 HCE 17,600 17,330 17,120 18,590 19,490 1,258 - - - - - -C110 15,870 15,250 15,070 16,360 16,500 1,107 - - - - - -Q125 17,600 17,330 17,120 18,590 19,490 1,258 - - - - - -Q125 HC 18,700 17,330 17,120 18,590 19,490 1,258 - - - - - -Q125 HCE 18,700 18,720 18,490 20,070 20,340 1,358 - - - - - -J55 2,270 3,740 3,730 4,160 3,740 316 3,740 234 - - - -K55 2,270 3,740 3,730 4,160 4,730 316 3,740 254 - - - -J55 3,270 4,360 4,340 4,820 4,370 366 4,360 284 4,360 313 4,360 432K55 3,270 4,360 4,340 4,820 5,540 366 4,360 309 4,360 341 4,360 522N80 3,830 6,340 6,310 7,010 5,900 532 6,340 402 6,340 442 6,340 588L80 3,830 6,340 6,310 7,010 6,770 532 6,340 396 6,340 435 6,340 565L80 1Cr 3,830 6,340 6,310 7,010 6,770 532 6,340 396 6,340 435 6,340 565L80 HC 3,920 6,340 6,310 7,010 6,770 532 6,340 396 6,340 435 6,340 565L80 IRP 3,830 6,340 6,310 7,010 6,770 532 6,340 396 6,340 435 6,340 565L80 HCE 3,920 6,930 6,910 7,670 6,770 582 6,930 422 6,930 461 6,930 578C90 4,030 7,130 7,100 7,890 7,860 599 7,130 437 7,130 479 7,130 605R95 4,150 7,530 7,500 8,330 7,530 632 7,530 460 7,530 505 7,530 636T95 4,150 7,530 7,500 8,330 8,310 632 7,530 460 7,530 505 7,530 636T95 HC 5,440 7,530 7,500 8,330 8,310 632 7,530 460 7,530 505 7,530 636T95 E 4,150 7,930 7,890 8,770 8,310 666 7,930 477 7,930 509 7,930 645T95 HCE 5,440 7,930 7,890 8,770 8,310 666 7,930 477 7,930 509 7,930 645P110 4,440 8,720 8,680 9,640 9,950 732 8,720 537 8,720 590 8,720 752P110 RY 4,440 8,720 8,680 9,640 9,950 732 8,720 537 8,720 590 8,720 752P110 MS 4,440 8,720 8,680 9,640 9,950 732 8,720 537 8,720 590 8,720 752P110 EC 5,690 9,910 9,870 10,960 10,810 832 9,910 601 9,910 655 9,910 823P110 HCE 5,690 9,910 9,870 10,960 10,810 832 9,910 601 9,910 655 9,910 823C110 4,440 8,720 8,680 9,640 9,150 732 8,720 524 8,720 558 8,720 707Q125 4,650 9,910 9,870 10,960 10,810 832 9,910 601 9,910 655 9,910 823Q125 HC 5,760 9,910 9,870 10,960 10,810 832 9,910 601 9,910 655 9,910 823Q125 HCE 5,760 10,700 10,660 11,840 11,280 898 10,700 642 10,700 679 10,700 863J55 4,330 4,980 4,950 5,470 5,010 415 4,980 334 4,980 367 4,980 490K55 4,330 4,980 4,950 5,470 6,350 415 4,980 364 4,980 401 4,980 592N80 5,410 7,240 7,200 7,960 6,770 604 7,240 472 7,240 519 7,240 667L80 5,410 7,240 7,200 7,960 7,770 604 7,240 465 7,240 511 7,240 641

6 5/8 32.00 31.23 0.475 9.177 5.550 N/A

6 5/8 28.00 27.67 0.417 8.133 5.666 N/A

6 5/8 35.00 34.23 0.525 10.061 5.450 N/A

7 20.00 19.56 0.272 5.749 6.331 N/A

7 23.00 22.65 0.317 6.655 6.241 6.250







Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP



Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

L80 1Cr 5,410 7,240 7,200 7,960 7,770 604 7,240 465 7,240 511 7,240 641L80 HC 5,520 7,240 7,200 7,960 7,770 604 7,240 465 7,240 511 7,240 641L80 IRP 5,410 7,240 7,200 7,960 7,770 604 7,240 465 7,240 511 7,240 641L80 HCE 5,520 7,920 7,880 8,710 7,770 661 7,920 495 7,920 541 7,920 656C90 5,740 8,150 8,100 8,960 9,030 679 8,150 513 8,150 563 8,150 687R95 5,890 8,600 8,550 9,460 8,640 717 8,600 541 8,600 593 8,600 722T95 5,890 8,600 8,550 9,460 9,540 717 8,600 541 8,600 593 8,600 722T95 HC 7,420 8,600 8,550 9,460 9,540 717 8,600 541 8,600 593 8,600 722T95 E 5,890 9,050 9,000 9,950 9,540 755 9,050 561 9,050 598 9,050 732T95 HCE 7,420 9,050 9,000 9,950 9,540 755 9,050 561 9,050 598 9,050 732P110 6,230 9,960 9,900 10,950 11,430 830 9,960 631 9,960 693 9,960 853P110 RY 6,230 9,960 9,900 10,950 11,430 830 9,960 631 9,960 693 9,960 853P110 MS 6,230 9,960 9,900 10,950 11,430 830 9,960 631 9,960 693 9,960 853P110 EC 8,030 11,310 11,250 12,440 12,420 944 11,310 707 11,310 769 11,310 934P110 HCE 8,260 11,310 11,250 12,440 12,420 944 11,310 707 11,310 769 11,310 934C110 6,230 9,960 9,900 10,950 10,510 830 9,960 616 9,960 655 9,960 802Q125 6,450 11,310 11,250 12,440 12,420 944 11,310 707 11,310 769 11,310 934Q125 HC 8,260 11,310 11,250 12,440 12,420 944 11,310 707 11,310 769 11,310 934Q125 HCE 8,260 12,220 12,150 13,440 12,960 1,019 11,790 755 11,790 798 12,220 979N80 7,030 8,160 8,110 8,920 7,660 676 - - 8,160 597 8,160 746L80 7,030 8,160 8,110 8,920 8,800 676 - - 8,160 587 8,160 718L80 1Cr 7,030 8,160 8,110 8,920 8,800 676 - - 8,160 587 8,160 718L80 HC 8,140 8,160 8,110 8,920 8,800 676 - - 8,160 587 8,160 718L80 IRP 7,030 8,160 8,110 8,920 8,800 676 - - 8,160 587 8,160 718L80 HCE 8,400 8,930 8,870 9,760 8,800 739 - - 8,930 623 8,930 734C90 7,580 9,180 9,120 10,040 10,230 760 - - 9,180 648 9,180 768R95 7,840 9,690 9,630 10,590 9,780 803 - - 9,690 683 9,690 808T95 7,840 9,690 9,630 10,590 10,810 803 - - 9,690 683 9,690 808T95 HC 9,300 9,690 9,630 10,590 10,810 803 - - 9,690 683 9,690 808T95 E 7,840 10,200 10,130 11,150 10,810 845 - - 10,200 688 10,200 819T95 HCE 9,300 10,200 10,130 11,150 10,810 845 - - 10,200 688 10,200 819P110 8,530 11,220 11,150 12,270 12,950 929 - - 11,220 797 11,220 955P110 RY 8,530 11,220 11,150 12,270 12,950 929 - - 11,220 797 11,220 955P110 MS 8,530 11,220 11,150 12,270 12,950 929 - - 11,220 797 11,220 955P110 EC 9,580 12,750 12,670 13,940 14,070 1,056 - - 11,790 885 12,750 1,045P110 HCE 9,760 12,750 12,670 13,940 14,070 1,056 - - 11,790 885 12,750 1,045

C110 8,530 11,220 11,150 12,270 11,920 929 - - 11,220 754 11,220 898Q125 9,110 12,750 12,670 13,940 14,070 1,056 - - 11,790 885 12,750 1,045Q125 HC 9,760 12,750 12,670 13,940 14,070 1,056 - - 11,790 885 12,750 1,045Q125 HCE 9,760 13,770 13,680 15,050 14,690 1,141 - - 11,790 918 13,770 1,096N80 8,610 9,060 8,990 9,850 8,540 745 - - 9,060 672 9,060 823L80 8,610 9,060 8,990 9,850 9,820 745 - - 9,060 661 9,060 791L80 1Cr 8,610 9,060 8,990 9,850 9,820 745 - - 9,060 661 9,060 791L80 HC 9,610 9,060 8,990 9,850 9,820 745 - - 9,060 661 9,060 791L80 IRP 8,610 9,060 8,990 9,850 9,820 745 - - 9,060 661 9,060 791L80 HCE 9,610 9,910 9,830 10,770 9,820 815 - - 9,910 701 9,910 810C90 9,370 10,190 10,110 11,080 11,430 839 - - 10,190 729 10,190 847R95 9,740 10,760 10,670 11,690 10,920 885 - - 10,760 768 10,760 891T95 9,740 10,760 10,670 11,690 12,070 885 - - 10,760 768 10,760 891T95 HC 10,910 10,760 10,670 11,690 12,070 885 - - 10,760 768 10,760 891T95 E 9,740 11,330 11,230 12,310 12,070 932 - - 11,330 775 11,330 903T95 HCE 10,910 11,330 11,230 12,310 12,070 932 - - 11,330 775 11,330 903P110 10,780 12,460 12,360 13,540 14,460 1,025 - - 11,790 897 12,460 1,053P110 RY 10,780 12,460 12,360 13,540 14,460 1,025 - - 11,790 897 12,460 1,053P110 MS 10,780 12,460 12,360 13,540 14,460 1,025 - - 11,790 897 12,460 1,053P110 EC 11,710 14,160 14,040 15,390 15,710 1,165 - - 11,790 996 14,160 1,152P110 HCE 12,500 14,160 14,040 15,390 15,710 1,165 - - 11,790 996 14,160 1,152C110 10,780 12,460 12,360 13,540 13,300 1,025 - - 11,790 848 12,460 990Q125 11,710 14,160 14,040 15,390 15,710 1,165 - - 11,790 996 14,160 1,152Q125 HC 12,620 14,160 14,040 15,390 15,710 1,165 - - 11,790 996 14,160 1,152Q125 HCE 12,620 15,290 15,160 16,620 16,400 1,258 - - 11,790 1,033 14,840 1,208N80 10,190 9,960 9,860 10,760 9,430 814 - - 9,960 746 9,960 898L80 10,190 9,960 9,860 10,760 10,850 814 - - 9,960 734 9,960 864L80 1Cr 10,190 9,960 9,860 10,760 10,850 814 - - 9,960 734 9,960 864L80 HC 11,330 9,960 9,860 10,760 10,850 814 - - 9,960 734 9,960 864L80 IRP 10,190 9,960 9,860 10,760 10,850 814 - - 9,960 734 9,960 864L80 HCE 11,330 10,890 10,790 11,770 10,850 890 - - 10,890 778 10,890 884C90 11,170 11,210 11,100 12,110 12,630 916 - - 11,210 809 11,210 925R95 11,650 11,830 11,710 12,780 12,060 966 - - 11,790 853 11,830 973T95 11,650 11,830 11,710 12,780 13,350 966 - - 11,790 853 11,830 973T95 HC 12,390 11,830 11,710 12,780 13,350 966 - - 11,790 853 11,830 973T95 E 11,650 12,450 12,330 13,450 13,350 1,017 - - 11,790 860 12,450 986

7 26.00 25.69 0.362 7.549 6.151 N/A

7 29.00 28.75 0.408 8.449 6.059 6.125

7 32.00 31.70 0.453 9.317 5.969 6.000

7 35.00 34.61 0.498 10.172 5.879 N/A

7 29.00 28.75 0.408 8.449 6.059 6.125







Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP



Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

7 41.00 40.43 0.590 11.881 5.695 N/A

7 42.70 42.59 0.625 12.517 5.625 N/A

T95 HCE 12,390 12,450 12,330 13,450 13,350 1,017 - - 11,790 860 12,450 986P110 13,030 13,700 13,560 14,800 15,990 1,119 - - 11,790 996 13,700 1,150P110 RY 13,030 13,700 13,560 14,800 15,990 1,119 - - 11,790 996 13,700 1,150P110 MS 13,030 13,700 13,560 14,800 15,990 1,119 - - 11,790 996 13,700 1,150P110 EC 14,310 15,560 15,410 16,810 17,370 1,272 - - 11,790 1,106 14,840 1,258P110 HCE 14,720 15,560 15,410 16,810 17,370 1,272 - - 11,790 1,106 14,840 1,258C110 13,030 13,700 13,560 14,800 14,710 1,119 - - 11,790 942 13,700 1,081Q125 14,320 15,560 15,410 16,810 17,370 1,272 - - 11,790 1,106 14,840 1,258Q125 HC 15,500 15,560 15,410 16,810 17,370 1,272 - - 11,790 1,106 14,840 1,258Q125 HCE 15,500 16,810 16,640 18,160 18,130 1,373 - - 11,790 1,147 14,840 1,319N80 11,390 10,800 10,680 11,600 10,260 877 - - 10,800 814 10,450 968L80 11,390 10,800 10,680 11,600 11,820 877 - - 10,800 801 10,450 931L80 1Cr 11,390 10,800 10,680 11,600 11,820 877 - - 10,800 801 10,450 931L80 HC 13,090 10,800 10,680 11,600 11,820 877 - - 10,800 801 10,450 931L80 IRP 11,390 10,800 10,680 11,600 11,820 877 - - 10,800 801 10,450 931L80 HCE 13,090 11,810 11,680 12,690 11,820 959 - - 11,790 849 11,430 953C90 12,810 12,150 12,010 13,050 13,770 986 - - 11,790 883 11,750 997R95 13,430 12,830 12,680 13,780 13,140 1,041 - - 11,790 931 12,410 1,048T95 13,430 12,830 12,680 13,780 14,550 1,041 - - 11,790 931 12,410 1,048T95 HC 13,700 12,830 12,680 13,780 14,550 1,041 - - 11,790 931 12,410 1,048T95 E 13,430 13,500 13,340 14,500 14,550 1,096 - - 11,790 938 13,060 1,062T95 HCE 13,700 13,500 13,340 14,500 14,550 1,096 - - 11,790 938 13,060 1,062P110 15,130 14,850 14,680 15,950 17,430 1,206 - - 11,790 1,087 14,360 1,239P110 RY 15,130 14,850 14,680 15,950 17,430 1,206 - - 11,790 1,087 14,360 1,239P110 MS 15,130 14,850 14,680 15,950 17,430 1,206 - - 11,790 1,087 14,360 1,239P110 EC 16,740 16,880 16,680 18,130 18,940 1,370 - - 11,790 1,207 14,840 1,356P110 HCE 16,900 16,880 16,680 18,130 18,940 1,370 - - 11,790 1,207 14,840 1,356C110 15,130 14,850 14,680 15,950 16,030 1,206 - - 11,790 1,028 14,360 1,165Q125 16,740 16,880 16,680 18,130 18,940 1,370 - - 11,790 1,207 14,840 1,356Q125 HC 17,770 16,880 16,680 18,130 18,940 1,370 - - 11,790 1,207 14,840 1,356Q125 HCE 17,770 18,230 18,010 19,580 19,760 1,479 - - 11,790 1,251 14,840 1,421N80 12,350 11,800 11,640 12,590 11,270 950 - - - - - -L80 12,350 11,800 11,640 12,590 12,990 950 - - - - - -L80 1Cr 12,350 11,800 11,640 12,590 12,990 950 - - - - - -L80 HC 13,510 11,800 11,640 12,590 12,990 950 - - - - - -L80 IRP 12,350 11,800 11,640 12,590 12,990 950 - - - - - -

L80 HCE 13,510 12,910 12,730 13,770 12,990 1,040 - - - - - -C90 13,890 13,280 13,090 14,170 15,140 1,069 - - - - - -R95 14,660 14,010 13,820 14,950 14,440 1,129 - - - - - -T95 14,660 14,010 13,820 14,950 16,000 1,129 - - - - - -T95 HC 15,440 14,010 13,820 14,950 16,000 1,129 - - - - - -T95 E 14,660 14,750 14,550 15,740 16,000 1,188 - - - - - -T95 HCE 15,440 14,750 14,550 15,740 16,000 1,188 - - - - - -P110 16,980 16,230 16,000 17,320 19,160 1,307 - - - - - -P110 RY 16,980 16,230 16,000 17,320 19,160 1,307 - - - - - -P110 MS 16,980 16,230 16,000 17,320 19,160 1,307 - - - - - -P110 EC 19,300 18,440 18,180 19,680 20,820 1,485 - - - - - -P110 HCE 19,300 18,440 18,180 19,680 20,820 1,485 - - - - - -C110 16,980 16,230 16,000 17,320 17,630 1,307 - - - - - -Q125 19,300 18,440 18,180 19,680 20,820 1,485 - - - - - -Q125 HC 20,840 18,440 18,180 19,680 20,820 1,485 - - - - - -Q125 HCE 20,840 19,910 19,640 21,250 21,730 1,604 - - - - - -N80 13,010 12,500 12,310 13,280 11,970 1,001 - - - - - -L80 13,010 12,500 12,310 13,280 13,810 1,001 - - - - - -L80 1Cr 13,010 12,500 12,310 13,280 13,810 1,001 - - - - - -L80 HC 14,230 12,500 12,310 13,280 13,810 1,001 - - - - - -L80 IRP 13,010 12,500 12,310 13,280 13,810 1,001 - - - - - -L80 HCE 14,230 13,670 13,460 14,520 13,810 1,095 - - - - - -C90 14,640 14,060 13,850 14,940 16,110 1,127 - - - - - -R95 15,450 14,840 14,610 15,770 15,360 1,189 - - - - - -T95 15,450 14,840 14,610 15,770 17,020 1,189 - - - - - -T95 HC 16,260 14,840 14,610 15,770 17,020 1,189 - - - - - -T95 E 15,450 15,630 15,380 16,600 17,020 1,252 - - - - - -T95 HCE 16,260 15,630 15,380 16,600 17,020 1,252 - - - - - -P110 17,890 17,190 16,920 18,260 20,390 1,377 - - - - - -P110 RY 17,890 17,190 16,920 18,260 20,390 1,377 - - - - - -P110 MS 17,890 17,190 16,920 18,260 20,390 1,377 - - - - - -P110 EC 20,330 19,530 19,230 20,750 22,150 1,565 - - - - - -P110 HCE 20,330 19,530 19,230 20,750 22,150 1,565 - - - - - -C110 17,890 17,190 16,920 18,260 18,760 1,377 - - - - - -Q125 20,330 19,530 19,230 20,750 22,150 1,565 - - - - - -Q125 HC 21,950 19,530 19,230 20,750 22,150 1,565 - - - - - -Q125 HCE 21,950 21,090 20,770 22,410 23,120 1,690 - - - - - -

7 38.00 37.29 0.540 10.959 5.795 N/A

7 41.00 40.43 0.590 11.881 5.695 N/A

7 35.00 34.61 0.498 10.172 5.879 N/A



Performance Data7 5/8" - 10 3/4"

Performance Data7 5/8" - 10 3/4"


Vallourec USA Corporation / Performance Data 7 5/8” -10 3/4” / pg. 61



Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

7 5/8 29.70 29.06 0.375 8.541 6.750 N/A

J55 2,890 4,140 4,130 4,590 4,150 414 4,140 315 4,140 346 4,140 483K55 2,890 4,140 4,130 4,590 5,250 414 4,140 342 4,140 377 4,140 581N80 3,400 6,020 6,000 6,680 5,600 602 6,020 446 6,020 490 6,020 659L80 3,400 6,020 6,000 6,680 6,420 602 6,020 440 6,020 482 6,020 635L80 1Cr 3,400 6,020 6,000 6,680 6,420 602 6,020 440 6,020 482 6,020 635L80 HC 3,520 6,020 6,000 6,680 6,420 602 6,020 440 6,020 482 6,020 635L80 IRP 3,400 6,020 6,000 6,680 6,420 602 6,020 440 6,020 482 6,020 635L80 HCE 3,520 6,590 6,560 7,300 6,420 658 6,590 469 6,590 514 6,590 651C90 3,610 6,780 6,750 7,510 7,450 677 6,780 485 6,780 532 6,780 681R95 3,710 7,150 7,130 7,930 7,140 714 7,150 511 7,150 560 7,150 716T95 3,710 7,150 7,130 7,930 7,880 714 7,150 511 7,150 560 7,150 716T95 HC 4,760 7,150 7,130 7,930 7,880 714 7,150 511 7,150 560 7,150 716T95 E 3,710 7,530 7,500 8,350 7,880 752 7,530 531 7,530 581 7,530 726T95 HCE 4,760 7,530 7,500 8,350 7,880 752 7,530 531 7,530 581 7,530 726P110 3,920 8,280 8,250 9,180 9,430 827 8,280 597 8,280 654 8,280 845P110 MS 3,920 8,280 8,250 9,180 9,430 827 8,280 597 8,280 654 8,280 845P110 EC 4,900 9,410 9,380 10,430 10,250 940 9,410 669 9,410 733 9,410 926P110 HCE 5,210 9,410 9,380 10,430 10,250 940 9,410 669 9,410 733 9,410 926C110 3,920 8,280 8,250 9,180 8,680 827 8,280 583 8,280 637 8,280 797Q125 4,050 9,410 9,380 10,430 10,250 940 9,410 669 9,410 733 9,410 926Q125 HC 5,210 9,410 9,380 10,430 10,250 940 9,410 669 9,410 733 9,410 926Q125 HCE 5,210 10,160 10,130 11,270 10,700 1,015 10,160 714 10,160 775 10,160 972N80 4,790 6,890 6,850 7,590 6,420 683 - - 6,890 575 6,890 749L80 4,790 6,890 6,850 7,590 7,370 683 - - 6,890 567 6,890 721L80 1Cr 4,790 6,890 6,850 7,590 7,370 683 - - 6,890 567 6,890 721L80 HC 4,830 6,890 6,850 7,590 7,370 683 - - 6,890 567 6,890 721L80 IRP 4,790 6,890 6,850 7,590 7,370 683 - - 6,890 567 6,890 721L80 HCE 4,830 7,530 7,500 8,300 7,370 747 - - 7,530 604 7,530 739C90 5,030 7,750 7,710 8,540 8,570 769 - - 7,750 625 7,750 773R95 5,130 8,180 8,140 9,010 8,200 811 - - 8,180 659 8,180 813T95 5,130 8,180 8,140 9,010 9,050 811 - - 8,180 659 8,180 813T95 HC 6,650 8,180 8,140 9,010 9,050 811 - - 8,180 659 8,180 813T95 E 5,130 8,610 8,570 9,490 9,050 854 - - 8,610 683 8,610 825T95 HCE 6,650 8,610 8,570 9,490 9,050 854 - - 8,610 683 8,610 825P110 5,350 9,470 9,420 10,440 10,840 940 - - 9,470 769 9,470 960P110 MS 5,350 9,470 9,420 10,440 10,840 940 - - 9,470 769 9,470 960

7 5/8 26.40 25.59 0.328 7.519 6.844 N/A




Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

7 5/8 29.70 29.06 0.375 8.541 6.750 N/A

7 5/8 33.70 33.07 0.430 9.720 6.640 N/A

7 5/8 39.00 38.08 0.500 11.192 6.500 N/A

pg. 62 / Vallourec USA Corporation / Performance Data 7 5/8” -10 3/4”

P110 EC 7,360 10,760 10,710 11,860 11,780 1,068 - - 10,760 861 10,760 1,052P110 HCE 7,580 10,760 10,710 11,860 11,780 1,068 - - 10,760 861 10,760 1,052C110 5,350 9,470 9,420 10,440 9,980 940 - - 9,470 748 9,470 905Q125 5,670 10,760 10,710 11,860 11,780 1,068 - - 10,760 861 10,760 1,052Q125 HC 7,580 10,760 10,710 11,860 11,780 1,068 - - 10,760 861 10,760 1,052Q125 HCE 7,580 11,620 11,560 12,810 12,290 1,153 - - 11,620 911 11,620 1,104N80 6,560 7,900 7,850 8,650 7,400 778 - - 7,900 674 7,900 852L80 6,560 7,900 7,850 8,650 8,500 778 - - 7,900 664 7,900 820L80 1Cr 6,560 7,900 7,850 8,650 8,500 778 - - 7,900 664 7,900 820L80 HC 6,930 7,900 7,850 8,650 8,500 778 - - 7,900 664 7,900 820L80 IRP 6,560 7,900 7,850 8,650 8,500 778 - - 7,900 664 7,900 820L80 HCE 6,930 8,640 8,580 9,460 8,500 850 - - 8,640 708 8,640 841C90 7,050 8,880 8,830 9,730 9,890 875 - - 8,880 733 8,880 880R95 7,270 9,380 9,320 10,270 9,450 923 - - 9,380 772 9,380 925T95 7,270 9,380 9,320 10,270 10,440 923 - - 9,380 772 9,380 925T95 HC 8,780 9,380 9,320 10,270 10,440 923 - - 9,380 772 9,380 925T95 E 7,270 9,870 9,810 10,810 10,440 972 - - 9,870 801 9,870 939T95 HCE 8,780 9,870 9,810 10,810 10,440 972 - - 9,870 801 9,870 939P110 7,870 10,860 10,790 11,890 12,510 1,069 - - 10,860 901 10,860 1,093P110 MS 7,870 10,860 10,790 11,890 12,510 1,069 - - 10,860 901 10,860 1,093P110 EC 9,060 12,340 12,260 13,510 13,590 1,215 - - 11,790 1,009 12,340 1,197P110 HCE 9,330 12,340 12,260 13,510 13,590 1,215 - - 11,790 1,009 12,340 1,197C110 7,870 10,860 10,790 11,890 11,510 1,069 - - 10,860 877 10,860 1,030Q125 8,340 12,340 12,260 13,510 13,590 1,215 - - 11,790 1,009 12,340 1,197Q125 HC 9,330 12,340 12,260 13,510 13,590 1,215 - - 11,790 1,009 12,340 1,197Q125 HCE 9,330 13,320 13,240 14,590 14,190 1,312 - - 11,790 1,068 12,670 1,257N80 8,820 9,180 9,100 9,970 8,660 895 - - 9,180 798 9,180 981L80 8,820 9,180 9,100 9,970 9,960 895 - - 9,180 786 9,180 945L80 1Cr 8,820 9,180 9,100 9,970 9,960 895 - - 9,180 786 9,180 945L80 HC 9,420 9,180 9,100 9,970 9,960 895 - - 9,180 786 9,180 945L80 IRP 8,820 9,180 9,100 9,970 9,960 895 - - 9,180 786 9,180 945L80 HCE 9,420 10,040 9,960 10,900 9,960 979 - - 10,040 837 10,040 969C90 9,610 10,330 10,240 11,220 11,590 1,007 - - 10,330 867 10,330 1,013R95 10,000 10,900 10,810 11,840 11,070 1,063 - - 10,900 914 10,900 1,065T95 10,000 10,900 10,810 11,840 12,240 1,063 - - 10,900 914 10,900 1,065T95 HC 11,120 10,900 10,810 11,840 12,240 1,063 - - 10,900 914 10,900 1,065





Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

7 5/8 42.80 42.43 0.562 12.470 6.376 N/A

7 5/8 39.00 38.08 0.500 11.192 6.500 N/A

7 5/8 45.30 44.71 0.595 13.141 6.310 N/A

T95 E 10,000 11,480 11,380 12,460 12,240 1,119 - - 11,480 948 11,480 1,081T95 HCE 11,120 11,480 11,380 12,460 12,240 1,119 - - 11,480 948 11,480 1,081P110 11,080 12,620 12,520 13,710 14,660 1,231 - - 11,790 1,066 12,620 1,258P110 MS 11,080 12,620 12,520 13,710 14,660 1,231 - - 11,790 1,066 12,620 1,258P110 EC 12,180 14,340 14,220 15,580 15,930 1,399 - - 11,790 1,194 12,670 1,379P110 HCE 13,210 14,340 14,220 15,580 15,930 1,399 - - 11,790 1,194 12,670 1,379C110 11,080 12,620 12,520 13,710 13,490 1,231 - - 11,790 1,038 12,620 1,186Q125 12,060 14,340 14,220 15,580 15,930 1,399 - - 11,790 1,194 12,670 1,379Q125 HC 13,500 14,340 14,220 15,580 15,930 1,399 - - 11,790 1,194 12,670 1,379Q125 HCE 13,500 15,490 15,360 16,820 16,630 1,511 - - 11,790 1,264 12,670 1,447N80 10,820 10,320 10,210 11,120 9,780 998 - - 10,320 906 9,790 1,093L80 10,820 10,320 10,210 11,120 11,260 998 - - 10,320 891 9,790 1,053L80 1Cr 10,820 10,320 10,210 11,120 11,260 998 - - 10,320 891 9,790 1,053L80 HC 11,620 10,320 10,210 11,120 11,260 998 - - 10,320 891 9,790 1,053L80 IRP 10,820 10,320 10,210 11,120 11,260 998 - - 10,320 891 9,790 1,053L80 HCE 11,620 11,290 11,170 12,160 11,260 1,091 - - 11,290 950 10,710 1,079C90 11,890 11,610 11,490 12,510 13,120 1,122 - - 11,610 984 11,010 1,129R95 12,410 12,250 12,120 13,210 12,520 1,185 - - 11,790 1,037 11,620 1,187T95 12,410 12,250 12,120 13,210 13,860 1,185 - - 11,790 1,037 11,620 1,187T95 HC 12,960 12,250 12,120 13,210 13,860 1,185 - - 11,790 1,037 11,620 1,187T95 E 12,410 12,900 12,760 13,900 13,860 1,247 - - 11,790 1,075 12,240 1,205T95 HCE 12,960 12,900 12,760 13,900 13,860 1,247 - - 11,790 1,075 12,240 1,205P110 13,930 14,190 14,040 15,290 16,600 1,372 - - 11,790 1,210 12,670 1,402P110 MS 13,930 14,190 14,040 15,290 16,600 1,372 - - 11,790 1,210 12,670 1,402P110 EC 15,350 16,120 15,950 17,380 18,040 1,559 - - 11,790 1,355 12,670 1,536P110 HCE 15,740 16,120 15,950 17,380 18,040 1,559 - - 11,790 1,355 12,670 1,536C110 13,930 14,190 14,040 15,290 15,270 1,372 - - 11,790 1,178 12,670 1,321Q125 15,350 16,120 15,950 17,380 18,040 1,559 - - 11,790 1,355 12,670 1,536Q125 HC 16,240 16,120 15,950 17,380 18,040 1,559 - - 11,790 1,355 12,670 1,536Q125 HCE 16,240 17,410 17,230 18,770 18,820 1,683 - - 11,790 1,434 12,670 1,612N80 11,510 10,920 10,800 11,730 10,390 1,051 - - 10,490 962 9,790 1,152L80 11,510 10,920 10,800 11,730 11,960 1,051 - - 10,490 947 9,790 1,109L80 1Cr 11,510 10,920 10,800 11,730 11,960 1,051 - - 10,490 947 9,790 1,109L80 HC 12,590 10,920 10,800 11,730 11,960 1,051 - - 10,490 947 9,790 1,109L80 IRP 11,510 10,920 10,800 11,730 11,960 1,051 - - 10,490 947 9,790 1,109L80 HCE 12,590 11,950 11,810 12,830 11,960 1,150 - - 11,470 1,009 10,710 1,137




Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

7 5/8 45.30 44.71 0.595 13.141 6.310 N/A

7 5/8 47.10 46.77 0.625 13.744 6.250 N/A

7 5/8 51.20 50.95 0.687 14.974 6.126 N/A






Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

7 5/8 51.20 50.95 0.687 14.974 6.126 N/A

7 5/8 55.30 55.12 0.750 16.199 6.000 N/A

C90 12,950 12,290 12,150 13,190 13,940 1,183 - - 11,790 1,045 11,010 1,189R95 13,670 12,970 12,820 13,930 13,310 1,248 - - 11,790 1,101 11,620 1,251T95 13,670 12,970 12,820 13,930 14,730 1,248 - - 11,790 1,101 11,620 1,251T95 HC 14,290 12,970 12,820 13,930 14,730 1,248 - - 11,790 1,101 11,620 1,251T95 E 13,670 13,660 13,490 14,660 14,730 1,314 - - 11,790 1,142 12,240 1,270T95 HCE 14,290 13,660 13,490 14,660 14,730 1,314 - - 11,790 1,142 12,240 1,270P110 15,440 15,020 14,840 16,120 17,640 1,445 - - 11,790 1,285 12,670 1,477P110 MS 15,440 15,020 14,840 16,120 17,640 1,445 - - 11,790 1,285 12,670 1,477P110 EC 17,270 17,070 16,870 18,320 19,170 1,643 - - 11,790 1,439 12,670 1,619P110 HCE 17,270 17,070 16,870 18,320 19,170 1,643 - - 11,790 1,439 12,670 1,619C110 15,440 15,020 14,840 16,120 16,230 1,445 - - 11,790 1,251 12,670 1,392Q125 17,110 17,070 16,870 18,320 19,170 1,643 - - 11,790 1,439 12,670 1,619Q125 HC 18,160 17,070 16,870 18,320 19,170 1,643 - - 11,790 1,439 12,670 1,619Q125 HCE 18,160 18,440 18,220 19,790 20,000 1,774 - - 11,790 1,523 12,670 1,699N80 12,040 11,480 11,330 12,270 10,940 1,100 - - 10,490 1,013 9,790 1,205L80 12,040 11,480 11,330 12,270 12,610 1,100 - - 10,490 997 9,790 1,160L80 1Cr 12,040 11,480 11,330 12,270 12,610 1,100 - - 10,490 997 9,790 1,160L80 HC 13,170 11,480 11,330 12,270 12,610 1,100 - - 10,490 997 9,790 1,160L80 IRP 12,040 11,480 11,330 12,270 12,610 1,100 - - 10,490 997 9,790 1,160L80 HCE 13,170 12,550 12,390 13,420 12,610 1,203 - - 11,470 1,062 10,710 1,177C90 13,540 12,910 12,740 13,810 14,690 1,237 - - 11,790 1,100 11,010 1,239R95 14,300 13,630 13,450 14,570 14,020 1,306 - - 11,790 1,159 11,620 1,301T95 14,300 13,630 13,450 14,570 15,520 1,306 - - 11,790 1,159 11,620 1,301T95 HC 15,050 13,630 13,450 14,570 15,520 1,306 - - 11,790 1,159 11,620 1,301T95 E 14,300 14,340 14,160 15,340 15,520 1,374 - - 11,790 1,202 12,240 1,301T95 HCE 15,050 14,340 14,160 15,340 15,520 1,374 - - 11,790 1,202 12,240 1,301P110 16,550 15,780 15,570 16,880 18,600 1,512 - - 11,790 1,353 12,670 1,545P110 MS 16,550 15,780 15,570 16,880 18,600 1,512 - - 11,790 1,353 12,670 1,545P110 EC 18,700 17,930 17,700 19,180 20,210 1,718 - - 11,790 1,515 12,670 1,673P110 HCE 18,700 17,930 17,700 19,180 20,210 1,718 - - 11,790 1,515 12,670 1,673C110 16,550 15,780 15,570 16,880 17,110 1,512 - - 11,790 1,317 12,670 1,425Q125 18,700 17,930 17,700 19,180 20,210 1,718 - - 11,790 1,515 12,670 1,673Q125 HC 19,900 17,930 17,700 19,180 20,210 1,718 - - 11,790 1,515 12,670 1,673Q125 HCE 19,900 19,360 19,110 20,710 21,080 1,856 - - 11,790 1,603 12,670 1,735N80 13,120 12,610 12,420 13,390 12,090 1,198 - - - - - -L80 13,120 12,610 12,420 13,390 13,950 1,198 - - - - - -

L80 1Cr 13,120 12,610 12,420 13,390 13,950 1,198 - - - - - -L80 HC 14,350 12,610 12,420 13,390 13,950 1,198 - - - - - -L80 IRP 13,120 12,610 12,420 13,390 13,950 1,198 - - - - - -L80 HCE 14,350 13,800 13,580 14,640 13,950 1,310 - - - - - -C90 14,760 14,190 13,970 15,060 16,270 1,348 - - - - - -R95 15,580 14,980 14,740 15,900 15,510 1,423 - - - - - -T95 15,580 14,980 14,740 15,900 17,190 1,423 - - - - - -T95 HC 16,430 14,980 14,740 15,900 17,190 1,423 - - - - - -T95 E 15,580 15,770 15,520 16,730 17,190 1,497 - - - - - -T95 HCE 16,430 15,770 15,520 16,730 17,190 1,497 - - - - - -P110 18,040 17,340 17,070 18,410 20,590 1,647 - - - - - -P110 MS 18,040 17,340 17,070 18,410 20,590 1,647 - - - - - -P110 EC 20,500 19,710 19,400 20,920 22,370 1,872 - - - - - -P110 HCE 20,500 19,710 19,400 20,920 22,370 1,872 - - - - - -C110 18,040 17,340 17,070 18,410 18,940 1,647 - - - - - -Q125 20,500 19,710 19,400 20,920 22,370 1,872 - - - - - -Q125 HC 22,130 19,710 19,400 20,920 22,370 1,872 - - - - - -Q125 HCE 22,130 21,290 20,950 22,590 23,340 2,022 - - - - - -N80 14,190 13,770 13,510 14,500 13,270 1,296 - - - - - -L80 14,190 13,770 13,510 14,500 15,330 1,296 - - - - - -L80 1Cr 14,190 13,770 13,510 14,500 15,330 1,296 - - - - - -L80 HC 15,520 13,770 13,510 14,500 15,330 1,296 - - - - - -L80 IRP 14,190 13,770 13,510 14,500 15,330 1,296 - - - - - -L80 HCE 15,520 15,060 14,780 15,860 15,330 1,417 - - - - - -C90 15,960 15,490 15,200 16,310 17,890 1,458 - - - - - -R95 16,850 16,350 16,050 17,220 17,050 1,539 - - - - - -T95 16,850 16,350 16,050 17,220 18,900 1,539 - - - - - -T95 HC 18,130 16,350 16,050 17,220 18,900 1,539 - - - - - -T95 E 16,850 17,210 16,890 18,130 18,900 1,620 - - - - - -T95 HCE 18,130 17,210 16,890 18,130 18,900 1,620 - - - - - -P110 19,510 18,930 18,580 19,940 22,640 1,782 - - - - - -P110 MS 19,510 18,930 18,580 19,940 22,640 1,782 - - - - - -P110 EC 22,170 21,520 21,110 22,660 24,610 2,025 - - - - - -P110 HCE 22,470 21,520 21,110 22,660 24,610 2,025 - - - - - -C110 19,510 18,930 18,580 19,940 20,830 1,782 - - - - - -Q125 22,170 21,520 21,110 22,660 24,610 2,025 - - - - - -




Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

7 5/8 55.30 55.12 0.750 16.199 6.000 N/A

7 3/4 46.10 45.51 0.595 13.374 6.435 6.500

7 3/4 48.02 47.60 0.625 13.990 6.375 N/A






Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

7 3/4 48.02 47.60 0.625 13.990 6.375 N/A

8 5/8 32.00 31.13 0.352 9.149 7.796 7.875

8 5/8 36.00 35.17 0.400 10.336 7.700 N/A

Q125 HC 23,950 21,520 21,110 22,660 24,610 2,025 - - - - - -Q125 HCE 23,950 23,240 22,800 24,470 25,670 2,187 - - - - - -N80 11,340 10,750 10,630 11,550 10,210 1,070 - - - - - -L80 11,340 10,750 10,630 11,550 11,760 1,070 - - - - - -L80 1Cr 11,340 10,750 10,630 11,550 11,760 1,070 - - - - - -L80 HC 12,400 10,750 10,630 11,550 11,760 1,070 - - - - - -L80 IRP 11,340 10,750 10,630 11,550 11,760 1,070 - - - - - -L80 HCE 12,400 11,760 11,620 12,630 11,760 1,170 - - - - - -C90 12,750 12,090 11,950 13,000 13,700 1,204 - - - - - -R95 13,320 12,760 12,620 13,720 13,080 1,271 - - - - - -T95 13,320 12,760 12,620 13,720 14,470 1,271 - - - - - -T95 HC 13,900 12,760 12,620 13,720 14,470 1,271 - - - - - -T95 E 13,320 13,440 13,280 14,440 14,470 1,337 - - - - - -T95 HCE 13,900 13,440 13,280 14,440 14,470 1,337 - - - - - -P110 15,000 14,780 14,610 15,880 17,340 1,471 - - - - - -P110 MS 15,000 14,780 14,610 15,880 17,340 1,471 - - - - - -P110 EC 16,600 16,790 16,600 18,050 18,840 1,672 - - - - - -P110 HCE 16,790 16,790 16,600 18,050 18,840 1,672 - - - - - -C110 15,000 14,780 14,610 15,880 15,950 1,471 - - - - - -Q125 16,600 16,790 16,600 18,050 18,840 1,672 - - - - - -Q125 HC 17,760 16,790 16,600 18,050 18,840 1,672 - - - - - -Q125 HCE 17,760 18,140 17,930 19,490 19,660 1,806 - - - - - -N80 11,860 11,290 11,150 12,090 10,750 1,119 - - - - - -L80 11,860 11,290 11,150 12,090 12,390 1,119 - - - - - -L80 1Cr 11,860 11,290 11,150 12,090 12,390 1,119 - - - - - -L80 HC 12,970 11,290 11,150 12,090 12,390 1,119 - - - - - -L80 IRP 11,860 11,290 11,150 12,090 12,390 1,119 - - - - - -L80 HCE 12,970 12,350 12,190 13,220 12,390 1,224 - - - - - -C90 13,350 12,700 12,540 13,600 14,440 1,259 - - - - - -R95 14,090 13,410 13,240 14,360 13,780 1,329 - - - - - -T95 14,090 13,410 13,240 14,360 15,260 1,329 - - - - - -T95 HC 14,830 13,410 13,240 14,360 15,260 1,329 - - - - - -T95 E 14,090 14,110 13,940 15,110 15,260 1,399 - - - - - -T95 HCE 14,830 14,110 13,940 15,110 15,260 1,399 - - - - - -P110 16,310 15,520 15,330 16,620 18,270 1,539 - - - - - -P110 MS 16,310 15,520 15,330 16,620 18,270 1,539 - - - - - -

P110 EC 18,160 17,640 17,420 18,890 19,860 1,749 - - - - - -P110 HCE 18,160 17,640 17,420 18,890 19,860 1,749 - - - - - -C110 1 6,310 15,520 15,330 16,620 16,810 1,539 - - - - - -Q125 1 8,160 17,640 17,420 18,890 19,860 1,749 - - - - - -Q125 HC 19,320 17,640 17,420 18,890 19,860 1,749 - - - - - -Q125 HCE 19,320 19,050 18,810 20,400 20,720 1,889 - - - - - -J55 2,530 3,930 3,920 4,360 3,930 503 3,930 372 3,930 417 3,930 579K55 2,530 3,930 3,920 4,360 4,980 503 3,930 402 3,930 452 3,930 690VST55 HC 2,850 5,000 4,980 5,550 5,240 640 5,000 528 5,000 591 5,000 792N80 3,050 5,710 5,700 6,350 5,300 732 5,710 528 5,710 591 5,710 792L80 3,050 5,710 5,700 6,350 6,080 732 5,710 521 5,710 583 5,710 764L80 1Cr 3,050 5,710 5,700 6,350 6,080 732 5,710 521 5,710 583 5,710 764L80 HC 3,180 5,710 5,700 6,350 6,080 732 5,710 521 5,710 583 5,710 764L80 IRP 3,050 5,710 5,700 6,350 6,080 732 5,710 521 5,710 583 5,710 764L80 HCE 3,180 6,250 6,230 6,940 6,080 801 6,250 556 6,250 622 6,250 787C90 3,210 6,430 6,410 7,140 7,060 823 6,430 575 6,430 643 6,430 822R95 3,290 6,780 6,760 7,540 6,760 869 6,780 607 6,780 678 6,780 864T95 3,290 6,780 6,760 7,540 7,460 869 6,780 607 6,780 678 6,780 864T95 HC 4,120 6,780 6,760 7,540 7,460 869 6,780 607 6,780 678 6,780 864T95 E 3,290 7,140 7,120 7,930 7,460 915 7,140 630 7,140 704 7,140 879T95 HCE 4,120 7,140 7,120 7,930 7,460 915 7,140 630 7,140 704 7,140 879J55 3,450 4,460 4,450 4,930 4,480 568 4,460 434 4,460 486 4,460 654K55 3,450 4,460 4,450 4,930 5,680 568 4,460 468 4,460 526 4,460 780VST55 HC 3,880 5,680 5,660 6,280 5,970 724 5,680 615 5,680 688 5,680 895N80 4,100 6,490 6,470 7,180 6,050 827 6,490 615 6,490 688 6,490 895L80 4,100 6,490 6,470 7,180 6,940 827 6,490 606 6,490 678 6,490 864L80 1Cr 4,100 6,490 6,470 7,180 6,940 827 6,490 606 6,490 678 6,490 864L80 HC 4,220 6,490 6,470 7,180 6,940 827 6,490 606 6,490 678 6,490 864L80 IRP 4,100 6,490 6,470 7,180 6,940 827 6,490 606 6,490 678 6,490 864L80 HCE 4,220 7,100 7,070 7,850 6,940 904 7,100 647 7,100 724 7,100 889C90 4,250 7,300 7,270 8,070 8,060 930 7,300 670 7,300 749 7,300 928R95 4,360 7,710 7,680 8,520 7,710 982 7,710 706 7,710 789 7,710 976T95 4,360 7,710 7,680 8,520 8,520 982 7,710 706 7,710 789 7,710 976T95 HC 5,780 7,710 7,680 8,520 8,520 982 7,710 706 7,710 789 7,710 976T95 E 4,360 8,120 8,080 8,970 8,520 1,034 8,120 734 8,120 820 8,120 993T95 HCE 5,780 8,120 8,080 8,970 8,520 1,034 8,120 734 8,120 820 8,120 993




Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

8 5/8 40.00 39.33 0.450 11.557 7.600 7.625

8 5/8 44.00 43.43 0.500 12.763 7.500 N/A






Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

8 5/8 44.00 43.43 0.500 12.763 7.500 N/A

9 3/8 39.00 38.38 0.400 11.278 8.419 8.500

9 5/8 36.00 34.89 0.352 10.254 8.765 N/A

9 5/8 40.00 38.97 0.395 11.454 8.679 8.750

9 5/8 43.50 42.73 0.435 12.559 8.599 8.625

N80 5,530 7,300 7,270 8,030 6,830 925 - - 7,300 788 7,300 1,001L80 5,530 7,300 7,270 8,030 7,840 925 - - 7,300 776 7,300 966L80 1Cr 5,530 7,300 7,270 8,030 7,840 925 - - 7,300 776 7,300 966L80 HC 5,790 7,300 7,270 8,030 7,840 925 - - 7,300 776 7,300 966L80 IRP 5,530 7,300 7,270 8,030 7,840 925 - - 7,300 776 7,300 966L80 HCE 5,790 7,990 7,950 8,780 7,840 1,011 - - 7,990 829 7,990 994C90 5,870 8,220 8,170 9,030 9,110 1,040 - - 8,220 858 8,220 1,038R95 6,020 8,670 8,630 9,540 8,720 1,098 - - 8,670 904 8,670 1,092T95 6,020 8,670 8,630 9,540 9,630 1,098 - - 8,670 904 8,670 1,092T95 HC 7,560 8,670 8,630 9,540 9,630 1,098 - - 8,670 904 8,670 1,092T95 E 6,020 9,130 9,080 10,040 9,630 1,156 - - 9,130 939 9,130 1,111T95 HCE 7,560 9,130 9,080 10,040 9,630 1,156 - - 9,130 939 9,130 1,111P110 6,400 10,040 9,990 11,040 11,530 1,271 - - 10,040 1,055 10,040 1,288P110 MS 6,400 10,040 9,990 11,040 11,530 1,271 - - 10,040 1,055 10,040 1,288P110 EC 8,140 11,410 11,350 12,550 12,530 1,445 - - 10,370 1,182 11,230 1,415P110 HCE 8,380 11,410 11,350 12,550 12,530 1,445 - - 10,370 1,182 11,230 1,415Q125 6,640 11,410 11,350 12,550 12,530 1,445 - - 10,370 1,182 11,230 1,415Q125 HC 8,450 11,410 11,350 12,550 12,530 1,445 - - 10,370 1,182 11,230 1,415Q125 HCE 8,450 12,330 12,260 13,550 13,080 1,560 - - 10,370 1,263 11,230 1,487N80 6,950 8,120 8,060 8,880 7,620 1,021 - - 8,120 887 8,120 1,105L80 6,950 8,120 8,060 8,880 8,750 1,021 - - 8,120 874 8,120 1,066L80 1Cr 6,950 8,120 8,060 8,880 8,750 1,021 - - 8,120 874 8,120 1,066L80 HC 7,360 8,120 8,060 8,880 8,750 1,021 - - 8,120 874 8,120 1,066L80 IRP 6,950 8,120 8,060 8,880 8,750 1,021 - - 8,120 874 8,120 1,066L80 HCE 7,360 8,880 8,820 9,710 8,750 1,117 - - 8,880 932 8,880 1,097C90 7,490 9,130 9,070 9,980 10,180 1,149 - - 9,130 965 9,130 1,146R95 7,740 9,640 9,570 10,540 9,730 1,212 - - 9,640 1,017 9,640 1,206T95 7,740 9,640 9,570 10,540 10,750 1,212 - - 9,640 1,017 9,640 1,206T95 HC 9,210 9,640 9,570 10,540 10,750 1,212 - - 9,640 1,017 9,640 1,206T95 E 7,740 10,140 10,080 11,090 10,750 1,276 - - 10,140 1,056 10,140 1,226T95 HCE 9,210 10,140 10,080 11,090 10,750 1,276 - - 10,140 1,056 10,140 1,226P110 8,420 11,160 11,090 12,200 12,880 1,404 - - 10,370 1,186 11,160 1,423P110 MS 8,420 11,160 11,090 12,200 12,880 1,404 - - 10,370 1,186 11,160 1,423P110 EC 8,980 12,680 12,600 13,870 13,990 1,595 - - 10,370 1,330 11,230 1,562P110 HCE 9,280 12,680 12,600 13,870 13,990 1,595 - - 10,370 1,330 11,230 1,562Q125 8,980 12,680 12,600 13,870 13,990 1,595 - - 10,370 1,330 11,230 1,562

Q125 HC 9,280 12,680 12,600 13,870 13,990 1,595 - - 10,370 1,330 11,230 1,562Q125 HCE 9,280 13,700 13,610 14,980 14,600 1,723 - - 10,370 1,421 11,230 1,642P110 3,840 8,210 8,180 9,110 9,350 1,241 - - - - - -P110 MS 3,840 8,210 8,180 9,110 9,350 1,241 - - - - - -P110 EC 3,960 9,330 9,300 10,350 10,160 1,410 - - - - - -P110 HCE 4,820 9,330 9,300 10,350 10,160 1,410 - - - - - -Q125 3,960 9,330 9,300 10,350 10,160 1,410 - - - - - -Q125 HC 4,860 9,330 9,300 10,350 10,160 1,410 - - - - - -Q125 HCE 4,860 10,080 10,040 11,180 10,610 1,523 - - - - - -J55 2,020 3,520 3,510 3,920 3,510 564 3,520 394 3,520 453 3,520 639K55 2,020 3,520 3,510 3,920 4,450 564 3,520 423 3,520 489 3,520 755VST55 HC 2,260 4,480 4,470 5,000 4,680 718 4,480 559 4,480 643 4,480 877N80 2,370 5,120 5,110 5,710 4,740 820 5,120 559 5,120 643 5,120 877J55 2,570 3,950 3,940 4,390 3,950 630 3,950 452 3,950 520 3,950 714K55 2,570 3,950 3,940 4,390 5,000 630 3,950 486 3,950 561 3,950 843VST55 HC 3,260 5,030 5,010 5,580 5,270 802 5,030 642 5,030 737 5,030 979N80 3,090 5,750 5,730 6,380 5,330 916 5,750 642 5,750 737 5,750 979L80 3,090 5,750 5,730 6,380 6,110 916 5,750 633 5,750 727 5,750 947L80 1Cr 3,090 5,750 5,730 6,380 6,110 916 5,750 633 5,750 727 5,750 947L80 HC 3,220 5,750 5,730 6,380 6,110 916 5,750 633 5,750 727 5,750 947L80 IRP 3,090 5,750 5,730 6,380 6,110 916 5,750 633 5,750 727 5,750 947L80 HCE 3,220 6,280 6,260 6,980 6,110 1,002 6,280 677 6,280 777 6,280 978C90 3,260 6,460 6,440 7,180 7,100 1,031 6,460 700 6,460 804 6,460 1,021R95 3,330 6,820 6,800 7,580 6,800 1,088 6,820 738 6,820 847 6,820 1,074T95 3,330 6,820 6,800 7,580 7,500 1,088 6,820 738 6,820 847 6,820 1,074T95 HC 4,190 6,820 6,800 7,580 7,500 1,088 6,820 738 6,820 847 6,820 1,074T95 E 3,330 7,180 7,160 7,980 7,500 1,145 7,180 768 7,180 881 7,180 1,095T95 HCE 4,190 7,180 7,160 7,980 7,500 1,145 7,180 768 7,180 881 7,180 1,095P110 3,470 7,900 7,870 8,770 8,980 1,260 7,900 861 7,900 988 7,900 1,266P110 MS 3,470 7,900 7,870 8,770 8,980 1,260 7,900 861 7,900 988 7,900 1,266P110 EC 4,230 8,980 8,950 9,970 9,760 1,432 8,980 966 8,980 1,108 8,980 1,393P110 HCE 3,630 8,980 8,950 9,970 9,760 1,432 8,980 966 8,980 1,108 8,980 1,393Q125 3,530 8,980 8,950 9,970 9,760 1,432 8,980 966 8,980 1,108 8,980 1,393Q125 HC 3,630 8,980 8,950 9,970 9,760 1,432 8,980 966 8,980 1,108 8,980 1,393Q125 HCE 3,630 9,700 9,660 10,770 10,190 1,546 9,670 1,033 9,700 1,185 9,160 1,467N80 3,810 6,330 6,300 7,000 5,890 1,005 - - 6,330 825 6,330 1,074




Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

9 5/8 43.50 42.73 0.435 12.559 8.599 8.625

9 5/8 47.00 46.18 0.472 13.572 8.525 8.625






Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

9 5/8 47.00 46.18 0.472 13.572 8.525 8.625

9 5/8 53.50 52.90 0.545 15.546 8.379 8.500

9 5/8 58.40 57.44 0.595 16.879 8.279 8.375

L80 3,810 6,330 6,300 7,000 6,750 1,005 - - 6,330 813 6,330 1,038L80 1Cr 3,810 6,330 6,300 7,000 6,750 1,005 - - 6,330 813 6,330 1,038L80 HC 3,950 6,330 6,300 7,000 6,750 1,005 - - 6,330 813 6,330 1,038L80 IRP 3,810 6,330 6,300 7,000 6,750 1,005 - - 6,330 813 6,330 1,038L80 HCE 3,950 6,920 6,890 7,660 6,750 1,099 - - 6,920 869 6,920 1,073C90 4,010 7,120 7,090 7,880 7,850 1,130 - - 7,120 899 7,120 1,119R95 4,130 7,510 7,480 8,310 7,510 1,193 - - 7,510 948 7,510 1,178T95 4,130 7,510 7,480 8,310 8,290 1,193 - - 7,510 948 7,510 1,178T95 HC 5,410 7,510 7,480 8,310 8,290 1,193 - - 7,510 948 7,510 1,178T95 E 4,130 7,910 7,880 8,750 8,290 1,256 - - 7,910 985 7,910 1,200T95 HCE 5,410 7,910 7,880 8,750 8,290 1,256 - - 7,910 985 7,910 1,200P110 4,420 8,700 8,670 9,630 9,930 1,381 - - 8,700 1,105 8,700 1,388P110 MS 4,420 8,700 8,670 9,630 9,930 1,381 - - 8,700 1,105 8,700 1,388P110 EC 5,770 9,890 9,850 10,940 10,790 1,570 - - 9,700 1,240 9,160 1,527P110 HCE 5,940 9,890 9,850 10,940 10,790 1,570 - - 9,700 1,240 9,160 1,527C110 4,420 8,700 8,670 9,630 9,140 1,381 - - 8,700 1,082 8,700 1,317Q125 4,620 9,890 9,850 10,940 10,790 1,570 - - 9,700 1,240 9,160 1,527Q125 HC 5,940 9,890 9,850 10,940 10,790 1,570 - - 9,700 1,240 9,160 1,527Q125 HCE 5,940 10,680 10,640 11,810 11,260 1,695 - - 9,700 1,325 9,160 1,608N80 4,760 6,870 6,830 7,570 6,410 1,086 - - 6,870 905 6,870 1,161L80 4,760 6,870 6,830 7,570 7,350 1,086 - - 6,870 893 6,870 1,122L80 1Cr 4,760 6,870 6,830 7,570 7,350 1,086 - - 6,870 893 6,870 1,122L80 HC 4,940 6,870 6,830 7,570 7,350 1,086 - - 6,870 893 6,870 1,122L80 IRP 4,760 6,870 6,830 7,570 7,350 1,086 - - 6,870 893 6,870 1,122L80 HCE 4,940 7,510 7,470 8,280 7,350 1,188 - - 7,510 954 7,510 1,159C90 4,990 7,720 7,690 8,520 8,540 1,222 - - 7,720 987 7,720 1,210R95 5,090 8,150 8,110 8,990 8,170 1,289 - - 8,150 1,040 8,150 1,273T95 5,090 8,150 8,110 8,990 9,020 1,289 - - 8,150 1,040 8,150 1,273T95 HC 6,600 8,150 8,110 8,990 9,020 1,289 - - 8,150 1,040 8,150 1,273T95 E 5,090 8,580 8,540 9,460 9,020 1,357 - - 8,460 1,081 8,580 1,297T95 HCE 6,600 8,580 8,540 9,460 9,020 1,357 - - 8,460 1,081 8,580 1,297P110 5,300 9,440 9,400 10,410 10,810 1,493 - - 9,440 1,213 9,160 1,500P110 MS 5,300 9,440 9,400 10,410 10,810 1,493 - - 9,440 1,213 9,160 1,500P110 EC 7,310 10,730 10,680 11,830 11,750 1,697 - - 9,700 1,361 9,160 1,650P110 HCE 7,530 10,730 10,680 11,830 11,750 1,697 - - 9,700 1,361 9,160 1,650C110 5,300 9,440 9,400 10,410 9,950 1,493 - - 9,440 1,188 9,160 1,423

Q125 5,630 10,730 10,680 11,830 11,750 1,697 - - 9,700 1,361 9,160 1,650Q125 HC 7,530 10,730 10,680 11,830 11,750 1,697 - - 9,700 1,361 9,160 1,650Q125 HCE 7,530 11,590 11,530 12,770 12,260 1,832 - - 9,700 1,455 9,160 1,738N80 6,620 7,930 7,880 8,680 7,430 1,244 - - 7,930 1,062 7,930 1,329L80 6,620 7,930 7,880 8,680 8,540 1,244 - - 7,930 1,047 7,930 1,285L80 1Cr 6,620 7,930 7,880 8,680 8,540 1,244 - - 7,930 1,047 7,930 1,285L80 HC 7,000 7,930 7,880 8,680 8,540 1,244 - - 7,930 1,047 7,930 1,285L80 IRP 6,620 7,930 7,880 8,680 8,540 1,244 - - 7,930 1,047 7,930 1,285L80 HCE 7,000 8,670 8,620 9,490 8,540 1,360 - - 8,460 1,118 8,670 1,328C90 7,110 8,920 8,860 9,760 9,930 1,399 - - 8,460 1,157 8,920 1,386R95 7,340 9,410 9,360 10,310 9,490 1,477 - - 8,460 1,220 9,160 1,458T95 7,340 9,410 9,360 10,310 10,490 1,477 - - 8,460 1,220 9,160 1,458T95 HC 8,850 9,410 9,360 10,310 10,490 1,477 - - 8,460 1,220 9,160 1,458T95 E 7,340 9,910 9,850 10,850 10,490 1,555 - - 8,460 1,267 9,160 1,486T95 HCE 8,850 9,910 9,850 10,850 10,490 1,555 - - 8,460 1,267 9,160 1,486P110 7,950 10,900 10,830 11,930 12,560 1,710 - - 9,700 1,422 9,160 1,718P110 MS 7,950 10,900 10,830 11,930 12,560 1,710 - - 9,700 1,422 9,160 1,718P110 EC 9,140 12,390 12,310 13,560 13,650 1,943 - - 9,700 1,595 9,160 1,890P110 HCE 9,390 12,390 12,310 13,560 13,650 1,943 - - 9,700 1,595 9,160 1,890C110 7,950 10,900 10,830 11,930 11,560 1,710 - - 9,700 1,393 9,160 1,630Q125 8,440 12,390 12,310 13,560 13,650 1,943 - - 9,700 1,595 9,160 1,890Q125 HC 9,700 12,390 12,310 13,560 13,650 1,943 - - 9,700 1,595 9,160 1,890Q125 HCE 9,700 13,380 13,290 14,650 14,250 2,099 - - 9,700 1,706 9,160 1,991N80 7,900 8,650 8,590 9,430 8,140 1,350 - - 8,460 1,167 8,650 1,443L80 7,900 8,650 8,590 9,430 9,360 1,350 - - 8,460 1,151 8,650 1,396L80 1Cr 7,900 8,650 8,590 9,430 9,360 1,350 - - 8,460 1,151 8,650 1,396L80 HC 8,400 8,650 8,590 9,430 9,360 1,350 - - 8,460 1,151 8,650 1,396L80 IRP 7,900 8,650 8,590 9,430 9,360 1,350 - - 8,460 1,151 8,650 1,396L80 HCE 8,400 9,470 9,400 10,320 9,360 1,477 - - 8,460 1,229 9,160 1,442C90 8,560 9,740 9,660 10,610 10,890 1,519 - - 8,460 1,272 9,160 1,505R95 8,880 10,280 10,200 11,200 10,410 1,604 - - 8,460 1,341 9,160 1,583T95 8,880 10,280 10,200 11,200 11,500 1,604 - - 8,460 1,341 9,160 1,583T95 HC 10,210 10,280 10,200 11,200 11,500 1,604 - - 8,460 1,341 9,160 1,583T95 E 8,880 10,820 10,740 11,790 11,500 1,688 - - 8,460 1,393 9,160 1,613T95 HCE 10,210 10,820 10,740 11,790 11,500 1,688 - - 8,460 1,393 9,160 1,613P110 9,770 11,900 11,810 12,970 13,780 1,857 - - 9,700 1,564 9,160 1,865




Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

9 5/8 58.40 57.44 0.595 16.879 8.279 8.375

9 5/8 59.40 58.70 0.609 17.250 8.251 N/A

9 7/8 62.80 61.80 0.625 18.162 8.469 8.500






Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

9 7/8 62.80 61.80 0.625 18.162 8.469 8.500

9 7/8 65.30 64.10 0.650 18.838 8.419 8.500

9 7/8 68.90 68.66 0.700 20.177 8.319 N/A

P110 MS 9,770 11,900 11,810 12,970 13,780 1,857 - - 9,700 1,564 9,160 1,865P110 EC 10,540 13,520 13,420 14,740 14,970 2,110 - - 9,700 1,754 9,160 2,052P110 HCE 10,740 13,520 13,420 14,740 14,970 2,110 - - 9,700 1,754 9,160 2,052C110 9,770 11,900 11,810 12,970 12,680 1,857 - - 9,700 1,531 9,160 1,770Q125 10,540 13,520 13,420 14,740 14,970 2,110 - - 9,700 1,754 9,160 2,052Q125 HC 10,980 13,520 13,420 14,740 14,970 2,110 - - 9,700 1,754 9,160 2,052Q125 HCE 10,980 14,600 14,500 15,910 15,620 2,279 - - 9,700 1,875 9,160 2,161N80 8,250 8,860 8,790 9,640 8,340 1,380 - - - - - -L80 8,250 8,860 8,790 9,640 9,590 1,380 - - - - - -L80 1Cr 8,250 8,860 8,790 9,640 9,590 1,380 - - - - - -L80 HC 8,800 8,860 8,790 9,640 9,590 1,380 - - - - - -L80 IRP 8,250 8,860 8,790 9,640 9,590 1,380 - - - - - -L80 HCE 8,800 9,690 9,610 10,540 9,590 1,509 - - - - - -C90 8,970 9,970 9,890 10,850 11,160 1,552 - - - - - -R95 9,320 10,520 10,440 11,450 10,660 1,639 - - - - - -T95 9,320 10,520 10,440 11,450 11,790 1,639 - - - - - -T95 HC 10,570 10,520 10,440 11,450 11,790 1,639 - - - - - -T95 E 9,320 11,070 10,990 12,050 11,790 1,725 - - - - - -T95 HCE 10,570 11,070 10,990 12,050 11,790 1,725 - - - - - -P110 10,280 12,180 12,090 13,260 14,120 1,897 - - - - - -P110 MS 10,280 12,180 12,090 13,260 14,120 1,897 - - - - - -P110 EC 11,130 13,840 13,730 15,060 15,340 2,156 - - - - - -P110 HCE 11,500 13,840 13,730 15,060 15,340 2,156 - - - - - -C110 10,280 12,180 12,090 13,260 12,990 1,897 - - - - - -Q125 11,130 13,840 13,730 15,060 15,340 2,156 - - - - - -Q125 HC 11,630 13,840 13,730 15,060 15,340 2,156 - - - - - -Q125 HCE 11,630 14,950 14,830 16,270 16,010 2,329 - - - - - -N80 8,260 8,860 8,790 9,640 8,340 1,453 - - - - - -L80 8,260 8,860 8,790 9,640 9,590 1,453 - - - - - -L80 1Cr 8,260 8,860 8,790 9,640 9,590 1,453 - - - - - -L80 HC 8,800 8,860 8,790 9,640 9,590 1,453 - - - - - -L80 IRP 8,260 8,860 8,790 9,640 9,590 1,453 - - - - - -L80 HCE 8,800 9,690 9,620 10,550 9,590 1,589 - - - - - -C90 8,980 9,970 9,890 10,850 11,160 1,635 - - - - - -R95 9,320 10,520 10,440 11,450 10,670 1,725 - - - - - -T95 9,320 10,520 10,440 11,450 11,790 1,725 - - - - - -

T95 HC 10,570 10,520 10,440 11,450 11,790 1,725 - - - - - -T95 E 9,320 11,080 10,990 12,050 11,790 1,816 - - - - - -T95 HCE 10,570 11,080 10,990 12,050 11,790 1,816 - - - - - -P110 10,290 12,180 12,090 13,260 14,120 1,998 - - - - - -P110 MS 10,290 12,180 12,090 13,260 14,120 1,998 - - - - - -P110 EC 11,250 13,840 13,740 15,070 15,350 2,270 - - - - - -P110 HCE 11,460 13,840 13,740 15,070 15,350 2,270 - - - - - -C110 10,290 12,180 12,090 13,260 12,990 1,998 - - - - - -Q125 11,140 13,840 13,740 15,070 15,350 2,270 - - - - - -Q125 HC 11,640 13,840 13,740 15,070 15,350 2,270 - - - - - -Q125 HCE 11,640 14,950 14,840 16,270 16,020 2,452 - - - - - -N80 8,880 9,220 9,140 10,010 8,690 1,507 - - - - - -L80 8,880 9,220 9,140 10,010 10,000 1,507 - - - - - -L80 1Cr 8,880 9,220 9,140 10,010 10,000 1,507 - - - - - -L80 HC 9,490 9,220 9,140 10,010 10,000 1,507 - - - - - -L80 IRP 8,880 9,220 9,140 10,010 10,000 1,507 - - - - - -L80 HCE 9,490 10,080 9,990 10,940 10,000 1,648 - - - - - -C90 9,680 10,370 10,280 11,260 11,630 1,695 - - - - - -R95 10,070 10,940 10,850 11,880 11,120 1,790 - - - - - -T95 10,070 10,940 10,850 11,880 12,290 1,790 - - - - - -T95 HC 12,040 10,940 10,850 11,880 12,290 1,790 - - - - - -T95 E 10,070 11,520 11,420 12,510 12,290 1,884 - - - - - -T95 HCE 12,040 11,520 11,420 12,510 12,290 1,884 - - - - - -P110 11,170 12,670 12,560 13,760 14,720 2,072 - - - - - -P110 MS 11,170 12,670 12,560 13,760 14,720 2,072 - - - - - -P110 EC 12,160 14,400 14,280 15,630 16,000 2,355 - - - - - -P110 HCE 12,560 14,400 14,280 15,630 16,000 2,355 - - - - - -C110 11,170 12,670 12,560 13,760 13,540 2,072 - - - - - -Q125 12,160 14,400 14,280 15,630 16,000 2,355 - - - - - -Q125 HC 12,760 14,400 14,280 15,630 16,000 2,355 - - - - - -Q125 HCE 12,760 15,550 15,420 16,880 16,690 2,543 - - - - - -N80 10,120 9,920 9,830 10,720 9,390 1,614 - - - - - -L80 10,120 9,920 9,830 10,720 10,810 1,614 - - - - - -L80 1Cr 10,120 9,920 9,830 10,720 10,810 1,614 - - - - - -L80 HC 10,860 9,920 9,830 10,720 10,810 1,614 - - - - - -L80 IRP 10,120 9,920 9,830 10,720 10,810 1,614 - - - - - -




Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

9 7/8 68.90 68.66 0.700 20.177 8.319 N/A

10 3/4 40.50 38.91 0.350 11.435 9.894 9.925

10 1/8 80.00 79.29 0.795 23.302 8.379 8.500

10 3/4 45.50 44.26 0.400 13.006 9.794 9.875






Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

10 3/4 45.50 44.26 0.400 13.006 9.794 9.875

10 3/4 51.00 49.55 0.450 14.561 9.694 N/A

10 3/4 55.50 54.26 0.495 15.947 9.604 9.625

L80 HCE 10,860 10,850 10,750 11,730 10,810 1,765 - - - - - -C90 11,100 11,160 11,060 12,060 12,580 1,816 - - - - - -R95 11,580 11,780 11,670 12,740 12,020 1,917 - - - - - -T95 11,580 11,780 11,670 12,740 13,300 1,917 - - - - - -T95 HC 12,340 11,780 11,670 12,740 13,300 1,917 - - - - - -T95 E 11,580 12,410 12,280 13,410 13,300 2,018 - - - - - -T95 HCE 12,340 12,410 12,280 13,410 13,300 2,018 - - - - - -P110 12,940 13,650 13,510 14,750 15,930 2,219 - - - - - -P110 MS 12,940 13,650 13,510 14,750 15,930 2,219 - - - - - -P110 EC 14,210 15,510 15,360 16,760 17,310 2,522 - - - - - -P110 HCE 14,900 15,510 15,360 16,760 17,310 2,522 - - - - - -C110 12,940 13,650 13,510 14,750 14,650 2,219 - - - - - -Q125 14,210 15,510 15,360 16,760 17,310 2,522 - - - - - -Q125 HC 15,000 15,510 15,360 16,760 17,310 2,522 - - - - - -Q125 HCE 15,000 16,750 16,580 18,100 18,060 2,724 - - - - - -P110 15,610 15,110 14,930 16,220 17,760 2,563 - - - - - -P110 MS 15,610 15,110 14,930 16,220 17,760 2,563 - - - - - -P110 EC 17,300 17,180 16,970 18,430 19,300 2,913 - - - - - -P110 HCE 17,300 17,180 16,970 18,430 19,300 2,913 - - - - - -C110 15,610 15,110 14,930 16,220 16,340 2,563 - - - - - -Q125 17,300 17,180 16,970 18,430 19,300 2,913 - - - - - -Q125 HC 18,370 17,180 16,970 18,430 19,300 2,913 - - - - - -Q125 HCE 18,370 18,550 18,330 19,900 20,140 3,146 - - - - - -J55 1,580 3,130 3,130 3,510 3,120 629 3,130 420 - - 3,130 700K55 1,580 3,130 3,130 3,510 3,950 629 3,130 450 - - 3,130 819VST55 HC 1,700 3,990 3,980 4,460 4,160 800 3,990 597 - - 3,990 964J55 2,090 3,580 3,570 3,990 3,570 715 3,580 493 - - 3,580 796K55 2,090 3,580 3,570 3,990 4,530 715 3,580 528 - - 3,580 931VST55 HC 2,350 4,560 4,550 5,080 4,760 910 4,560 701 - - 4,560 1,097N80 2,480 5,210 5,200 5,810 4,820 1,040 5,210 701 - - 5,210 1,097L80 2,480 5,210 5,200 5,810 5,530 1,040 5,210 692 - - 5,210 1,063L80 1Cr 2,480 5,210 5,200 5,810 5,530 1,040 5,210 692 - - 5,210 1,063L80 HC 3,140 5,210 5,200 5,810 5,530 1,040 5,210 692 - - 5,210 1,063L80 IRP 2,480 5,210 5,200 5,810 5,530 1,040 5,210 692 - - 5,210 1,063L80 HCE 3,140 5,700 5,680 6,350 5,530 1,138 5,700 741 - - 5,700 1,102C90 2,560 5,860 5,840 6,530 6,420 1,171 5,860 767 - - 5,860 1,149

R95 2,590 6,190 6,170 6,890 6,140 1,236 6,190 808 - - 6,190 1,209T95 2,590 6,190 6,170 6,890 6,780 1,236 6,190 808 - - 6,190 1,209T95 HC 3,180 6,190 6,170 6,890 6,780 1,236 6,190 808 - - 6,190 1,209T95 E 2,590 6,510 6,490 7,260 6,780 1,301 6,510 841 - - 6,510 1,236T95 HCE 3,180 6,510 6,490 7,260 6,780 1,301 6,510 841 - - 6,510 1,236P110 2,610 7,160 7,140 7,980 8,120 1,431 7,160 941 - - 7,160 1,423P110 MS 2,610 7,160 7,140 7,980 8,120 1,431 7,160 941 - - 7,160 1,423P110 EC 3,450 8,140 8,120 9,070 8,820 1,626 7,890 1,057 - - 7,440 1,570P110 HCE 3,450 8,140 8,120 9,070 8,820 1,626 7,890 1,057 - - 7,440 1,570Q125 2,610 8,140 8,120 9,070 8,820 1,626 7,890 1,057 - - 7,440 1,570Q125 HC 3,260 8,140 8,120 9,070 8,820 1,626 7,890 1,057 - - 7,440 1,570Q125 HCE 3,260 8,790 8,770 9,800 9,210 1,756 7,890 1,132 - - 7,440 1,656J55 2,700 4,030 4,020 4,470 4,030 801 4,030 565 - - 4,030 891K55 2,700 4,030 4,020 4,470 5,110 801 4,030 606 - - 4,030 1,043VST55 HC 2,990 5,130 5,110 5,690 5,380 1,019 5,130 804 - - 5,130 1,228N80 3,220 5,860 5,840 6,500 5,440 1,165 5,860 804 - - 5,860 1,228L80 3,220 5,860 5,840 6,500 6,240 1,165 5,860 794 - - 5,860 1,190L80 1Cr 3,220 5,860 5,840 6,500 6,240 1,165 5,860 794 - - 5,860 1,190L80 HC 3,360 5,860 5,840 6,500 6,240 1,165 5,860 794 - - 5,860 1,190L80 IRP 3,220 5,860 5,840 6,500 6,240 1,165 5,860 794 - - 5,860 1,190L80 HCE 3,360 6,410 6,390 7,110 6,240 1,274 6,410 850 - - 6,410 1,234C90 3,400 6,590 6,570 7,320 7,250 1,311 6,590 879 - - 6,590 1,287R95 3,490 6,960 6,940 7,720 6,940 1,383 6,870 927 - - 6,960 1,354T95 3,490 6,960 6,940 7,720 7,660 1,383 6,870 927 - - 6,960 1,354T95 HC 4,420 6,960 6,940 7,720 7,660 1,383 6,870 927 - - 6,960 1,354T95 E 3,490 7,330 7,300 8,130 7,660 1,456 6,870 964 - - 7,330 1,383T95 HCE 4,420 7,330 7,300 8,130 7,660 1,456 6,870 964 - - 7,330 1,383P110 3,660 8,060 8,030 8,940 9,170 1,602 7,890 1,079 - - 7,440 1,594P110 MS 3,660 8,060 8,030 8,940 9,170 1,602 7,890 1,079 - - 7,440 1,594P110 EC 4,510 9,160 9,130 10,160 9,970 1,820 7,890 1,212 - - 7,440 1,758P110 HCE 4,510 9,160 9,130 10,160 9,970 1,820 7,890 1,212 - - 7,440 1,758Q125 3,740 9,160 9,130 10,160 9,970 1,820 7,890 1,212 - - 7,440 1,758Q125 HC 4,600 9,160 9,130 10,160 9,970 1,820 7,890 1,212 - - 7,440 1,758Q125 HCE 4,600 9,890 9,860 10,970 10,400 1,966 7,890 1,297 - - 7,440 1,854N80 4,020 6,450 6,420 7,130 6,000 1,276 6,450 895 - - 6,450 1,345L80 4,020 6,450 6,420 7,130 6,880 1,276 6,450 884 - - 6,450 1,303




Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

10 3/4 55.50 54.26 0.495 15.947 9.604 9.625

10 3/4 60.70 59.45 0.545 17.473 9.504 N/A






Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

10 3/4 60.70 59.45 0.545 17.473 9.504 N/A

10 3/4 65.70 64.59 0.595 18.982 9.404 9.500

10 3/4 68.80 68.76 0.636 20.208 9.322 N/A

L80 1Cr 4,020 6,450 6,420 7,130 6,880 1,276 6,450 884 - - 6,450 1,303L80 HC 4,130 6,450 6,420 7,130 6,880 1,276 6,450 884 - - 6,450 1,303L80 IRP 4,020 6,450 6,420 7,130 6,880 1,276 6,450 884 - - 6,450 1,303L80 HCE 4,130 7,050 7,020 7,800 6,880 1,395 6,870 947 - - 7,050 1,352C90 4,160 7,250 7,220 8,020 8,000 1,435 6,870 979 - - 7,250 1,409R95 4,300 7,660 7,620 8,460 7,660 1,515 6,870 1,032 - - 7,440 1,483T95 4,300 7,660 7,620 8,460 8,450 1,515 6,870 1,032 - - 7,440 1,483T95 HC 5,670 7,660 7,620 8,460 8,450 1,515 6,870 1,032 - - 7,440 1,483T95 E 4,300 8,060 8,030 8,910 8,450 1,595 6,870 1,074 - - 7,440 1,515T95 HCE 5,670 8,060 8,030 8,910 8,450 1,595 6,870 1,074 - - 7,440 1,515P110 4,610 8,860 8,830 9,800 10,120 1,754 7,890 1,202 - - 7,440 1,745P110 MS 4,610 8,860 8,830 9,800 10,120 1,754 7,890 1,202 - - 7,440 1,745P110 EC 6,130 10,070 10,030 11,140 11,000 1,993 7,890 1,350 - - 7,440 1,925P110 HCE 6,310 10,070 10,030 11,140 11,000 1,993 7,890 1,350 - - 7,440 1,925C110 4,610 8,860 8,830 9,800 9,310 1,754 7,890 1,180 - - 7,440 1,662Q125 4,850 10,070 10,030 11,140 11,000 1,993 7,890 1,350 - - 7,440 1,925Q125 HC 6,440 10,070 10,030 11,140 11,000 1,993 7,890 1,350 - - 7,440 1,925Q125 HCE 6,440 10,880 10,830 12,030 11,480 2,153 7,890 1,445 - - 7,440 2,031N80 5,160 7,100 7,060 7,810 6,630 1,398 6,870 996 - - 7,100 1,473L80 5,160 7,100 7,060 7,810 7,610 1,398 6,870 983 - - 7,100 1,428L80 1Cr 5,160 7,100 7,060 7,810 7,610 1,398 6,870 983 - - 7,100 1,428L80 HC 5,390 7,100 7,060 7,810 7,610 1,398 6,870 983 - - 7,100 1,428L80 IRP 5,160 7,100 7,060 7,810 7,610 1,398 6,870 983 - - 7,100 1,428L80 HCE 5,390 7,760 7,720 8,550 7,610 1,529 6,870 1,053 - - 7,440 1,481C90 5,460 7,980 7,950 8,790 8,840 1,573 6,870 1,089 - - 7,440 1,544R95 5,580 8,430 8,390 9,280 8,460 1,660 6,870 1,148 - - 7,440 1,625T95 5,580 8,430 8,390 9,280 9,340 1,660 6,870 1,148 - - 7,440 1,625T95 HC 7,110 8,430 8,390 9,280 9,340 1,660 6,870 1,148 - - 7,440 1,625T95 E 5,580 8,870 8,830 9,770 9,340 1,747 6,870 1,195 - - 7,440 1,660T95 HCE 7,110 8,870 8,830 9,770 9,340 1,747 6,870 1,195 - - 7,440 1,660P110 5,880 9,760 9,710 10,740 11,190 1,922 7,890 1,337 - - 7,440 1,912P110 MS 5,880 9,760 9,710 10,740 11,190 1,922 7,890 1,337 - - 7,440 1,912P110 EC 7,780 11,090 11,030 12,210 12,160 2,184 7,890 1,502 - - 7,440 2,109P110 HCE 8,010 11,090 11,030 12,210 12,160 2,184 7,890 1,502 - - 7,440 2,109C110 5,880 9,760 9,710 10,740 10,300 1,922 7,890 1,312 - - 7,440 1,821Q125 6,070 11,090 11,030 12,210 12,160 2,184 7,890 1,502 - - 7,440 2,109

Q125 HC 8,010 11,090 11,030 12,210 12,160 2,184 7,890 1,502 - - 7,440 2,109Q125 HCE 8,010 11,980 11,920 13,190 12,690 2,359 7,890 1,608 - - 7,440 2,225N80 6,310 7,750 7,700 8,490 7,260 1,519 6,870 1,096 - - 7,440 1,600L80 6,310 7,750 7,700 8,490 8,340 1,519 6,870 1,082 - - 7,440 1,551L80 1Cr 6,310 7,750 7,700 8,490 8,340 1,519 6,870 1,082 - - 7,440 1,551L80 HC 6,650 7,750 7,700 8,490 8,340 1,519 6,870 1,082 - - 7,440 1,551L80 IRP 6,310 7,750 7,700 8,490 8,340 1,519 6,870 1,082 - - 7,440 1,551L80 HCE 6,650 8,480 8,430 9,290 8,340 1,661 6,870 1,159 - - 7,440 1,609C90 6,760 8,720 8,670 9,560 9,690 1,708 6,870 1,198 - - 7,440 1,677R95 6,960 9,200 9,150 10,090 9,270 1,803 6,870 1,263 - - 7,440 1,765T95 6,960 9,200 9,150 10,090 10,240 1,803 6,870 1,263 - - 7,440 1,765T95 HC 8,490 9,200 9,150 10,090 10,240 1,803 6,870 1,263 - - 7,440 1,765T95 E 6,960 9,690 9,630 10,620 10,240 1,898 6,870 1,314 - - 7,440 1,803T95 HCE 8,490 9,690 9,630 10,620 10,240 1,898 6,870 1,314 - - 7,440 1,803P110 7,510 10,650 10,590 11,680 12,270 2,088 7,890 1,471 - - 7,440 2,077P110 MS 7,510 10,650 10,590 11,680 12,270 2,088 7,890 1,471 - - 7,440 2,077P110 EC 8,900 12,110 12,040 13,270 13,330 2,373 7,890 1,652 - - 7,440 2,291P110 HCE 9,170 12,110 12,040 13,270 13,330 2,373 7,890 1,652 - - 7,440 2,291C110 7,510 10,650 10,590 11,680 11,290 2,088 7,890 1,444 - - 7,440 1,979Q125 7,920 12,110 12,040 13,270 13,330 2,373 7,890 1,652 - - 7,440 2,291Q125 HC 9,170 12,110 12,040 13,270 13,330 2,373 7,890 1,652 - - 7,440 2,291Q125 HCE 9,170 13,080 13,000 14,330 13,910 2,563 7,890 1,768 - - 7,440 2,417N80 7,240 8,280 8,230 9,050 7,780 1,617 - - - - - -L80 7,240 8,280 8,230 9,050 8,940 1,617 - - - - - -L80 1Cr 7,240 8,280 8,230 9,050 8,940 1,617 - - - - - -L80 HC 7,680 8,280 8,230 9,050 8,940 1,617 - - - - - -L80 IRP 7,240 8,280 8,230 9,050 8,940 1,617 - - - - - -L80 HCE 7,680 9,060 9,000 9,900 8,940 1,768 - - - - - -C90 7,820 9,320 9,250 10,180 10,400 1,819 - - - - - -R95 8,100 9,840 9,770 10,740 9,940 1,920 - - - - - -T95 8,100 9,840 9,770 10,740 10,980 1,920 - - - - - -T95 HC 9,870 9,840 9,770 10,740 10,980 1,920 - - - - - -T95 E 8,100 10,350 10,280 11,310 10,980 2,021 - - - - - -T95 HCE 9,870 10,350 10,280 11,310 10,980 2,021 - - - - - -P110 8,840 11,390 11,310 12,440 13,160 2,223 - - - - - -P110 MS 8,840 11,390 11,310 12,440 13,160 2,223 - - - - - -




Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

10 3/4 68.80 68.76 0.636 20.208 9.322 N/A

10 3/4 73.20 72.40 0.672 21.276 9.250 N/A

10 3/4 79.20 78.59 0.734 23.096 9.126 N/A






Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

10 3/4 79.20 78.59 0.734 23.096 9.126 N/A

10 3/4 85.30 84.80 0.797 24.921 9.000 N/A

P110 EC 9,470 12,940 12,850 14,140 14,300 2,526 - - - - - -P110 HCE 9,810 12,940 12,850 14,140 14,300 2,526 - - - - - -C110 8,840 11,390 11,310 12,440 12,100 2,223 - - - - - -Q125 9,470 12,940 12,850 14,140 14,300 2,526 - - - - - -Q125 HC 9,810 12,940 12,850 14,140 14,300 2,526 - - - - - -Q125 HCE 9,810 13,980 13,880 15,270 14,920 2,728 - - - - - -N80 8,070 8,750 8,690 9,530 8,240 1,702 - - - - - -L80 8,070 8,750 8,690 9,530 9,470 1,702 - - - - - -L80 1Cr 8,070 8,750 8,690 9,530 9,470 1,702 - - - - - -L80 HC 8,590 8,750 8,690 9,530 9,470 1,702 - - - - - -L80 IRP 8,070 8,750 8,690 9,530 9,470 1,702 - - - - - -L80 HCE 8,590 9,570 9,500 10,420 9,470 1,862 - - - - - -C90 8,760 9,850 9,770 10,720 11,020 1,915 - - - - - -R95 9,090 10,390 10,310 11,320 10,530 2,021 - - - - - -T95 9,090 10,390 10,310 11,320 11,640 2,021 - - - - - -T95 HC 10,380 10,390 10,310 11,320 11,640 2,021 - - - - - -T95 E 9,090 10,940 10,860 11,910 11,640 2,128 - - - - - -T95 HCE 10,380 10,940 10,860 11,910 11,640 2,128 - - - - - -P110 10,010 12,030 11,940 13,100 13,940 2,340 - - - - - -P110 MS 10,010 12,030 11,940 13,100 13,940 2,340 - - - - - -P110 EC 10,820 13,670 13,570 14,890 15,150 2,660 - - - - - -P110 HCE 11,290 13,670 13,570 14,890 15,150 2,660 - - - - - -C110 10,010 12,030 11,940 13,100 12,830 2,340 - - - - - -Q125 10,820 13,670 13,570 14,890 15,150 2,660 - - - - - -Q125 HC 11,290 13,670 13,570 14,890 15,150 2,660 - - - - - -Q125 HCE 11,290 14,770 14,660 16,080 15,810 2,872 - - - - - -N80 9,480 9,560 9,470 10,350 9,030 1,848 - - - - - -L80 9,480 9,560 9,470 10,350 10,390 1,848 - - - - - -L80 1Cr 9,480 9,560 9,470 10,350 10,390 1,848 - - - - - -L80 HC 10,290 9,560 9,470 10,350 10,390 1,848 - - - - - -L80 IRP 9,480 9,560 9,470 10,350 10,390 1,848 - - - - - -L80 HCE 10,290 10,460 10,360 11,330 10,390 2,021 - - - - - -C90 10,370 10,750 10,660 11,650 12,090 2,079 - - - - - -R95 10,800 11,350 11,250 12,300 11,550 2,194 - - - - - -T95 10,800 11,350 11,250 12,300 12,780 2,194 - - - - - -T95 HC 11,750 11,350 11,250 12,300 12,780 2,194 - - - - - -

T95 E 10,800 11,950 11,840 12,940 12,780 2,310 - - - - - -T95 HCE 11,750 11,950 11,840 12,940 12,780 2,310 - - - - - -P110 12,030 13,140 13,020 14,240 15,300 2,541 - - - - - -P110 MS 12,030 13,140 13,020 14,240 15,300 2,541 - - - - - -P110 EC 13,160 14,940 14,800 16,180 16,630 2,887 - - - - - -P110 HCE 13,840 14,940 14,800 16,180 16,630 2,887 - - - - - -C110 12,030 13,140 13,020 14,240 14,080 2,541 - - - - - -Q125 13,160 14,940 14,800 16,180 16,630 2,887 - - - - - -Q125 HC 13,840 14,940 14,800 16,180 16,630 2,887 - - - - - -Q125 HCE 13,840 16,130 15,990 17,470 17,350 3,118 - - - - - -N80 10,920 10,380 10,270 11,180 9,840 1,994 - - - - - -L80 10,920 10,380 10,270 11,180 11,330 1,994 - - - - - -L80 1Cr 10,920 10,380 10,270 11,180 11,330 1,994 - - - - - -L80 HC 11,740 10,380 10,270 11,180 11,330 1,994 - - - - - -L80 IRP 10,920 10,380 10,270 11,180 11,330 1,994 - - - - - -L80 HCE 11,740 11,350 11,230 12,230 11,330 2,181 - - - - - -C90 12,010 11,680 11,550 12,580 13,200 2,243 - - - - - -R95 12,540 12,330 12,190 13,280 12,600 2,367 - - - - - -T95 12,540 12,330 12,190 13,280 13,950 2,367 - - - - - -T95 HC 13,070 12,330 12,190 13,280 13,950 2,367 - - - - - -T95 E 12,540 12,970 12,840 13,980 13,950 2,492 - - - - - -T95 HCE 13,070 12,970 12,840 13,980 13,950 2,492 - - - - - -P110 14,080 14,270 14,120 15,380 16,700 2,741 - - - - - -P110 MS 14,080 14,270 14,120 15,380 16,700 2,741 - - - - - -P110 EC 15,530 16,220 16,050 17,470 18,150 3,115 - - - - - -P110 HCE 15,870 16,220 16,050 17,470 18,150 3,115 - - - - - -C110 14,080 14,270 14,120 15,380 15,370 2,741 - - - - - -Q125 15,530 16,220 16,050 17,470 18,150 3,115 - - - - - -Q125 HC 16,440 16,220 16,050 17,470 18,150 3,115 - - - - - -Q125 HCE 16,440 17,520 17,330 18,870 18,940 3,364 - - - - - -



Vallourec USA Corporation / Performance Data 11 3/4” - 26” / pg. 81



Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

11 3/4 47.00 45.60 0.375 13.401 10.844 N/A

11 3/4 54.00 52.62 0.435 15.463 10.724 N/A

11 3/4 60.00 58.87 0.489 17.300 10.616 10.625

11 3/4 65.00 64.03 0.534 18.816 10.526 10.625

J55 1,510 3,070 3,070 3,440 3,050 737 3,070 477 - - 3,070 807K55 1,510 3,070 3,070 3,440 3,870 737 3,070 509 - - 3,070 935J55 2,070 3,560 3,550 3,970 3,560 850 3,560 568 - - 3,560 931K55 2,070 3,560 3,550 3,970 4,500 850 3,560 606 - - 3,560 1,079J55 2,660 4,010 3,990 4,450 4,010 951 4,010 649 - - 4,010 1,042K55 2,660 4,010 3,990 4,450 5,080 951 4,010 693 - - 4,010 1,208N80 3,180 5,830 5,810 6,470 5,410 1,384 5,810 924 - - 5,830 1,440L80 3,180 5,830 5,810 6,470 6,200 1,384 5,810 913 - - 5,830 1,399L80 1Cr 3,180 5,830 5,810 6,470 6,200 1,384 5,810 913 - - 5,830 1,399L80 HC 4,400 5,830 5,810 6,470 6,200 1,384 5,810 913 - - 5,830 1,399L80 IRP 3,180 5,830 5,810 6,470 6,200 1,384 5,810 913 - - 5,830 1,399L80 HCE 4,400 6,370 6,350 7,070 6,200 1,514 5,810 978 - - 6,300 1,456C90 3,360 6,550 6,530 7,280 7,200 1,557 5,810 1,011 - - 6,300 1,517R95 3,440 6,920 6,900 7,680 6,900 1,643 5,810 1,066 - - 6,300 1,596T95 3,440 6,920 6,900 7,680 7,610 1,643 5,810 1,066 - - 6,300 1,596T95 HC 4,350 6,920 6,900 7,680 7,610 1,643 5,810 1,066 - - 6,300 1,596T95 E 3,500 7,280 7,260 8,080 7,610 1,730 5,810 1,110 - - 6,300 1,635T95 HCE 4,350 7,280 7,260 8,080 7,610 1,730 5,810 1,110 - - 6,300 1,635P110 3,610 8,010 7,980 8,890 9,120 1,903 6,670 1,242 - - 6,300 1,877P110 MS 3,610 8,010 7,980 8,890 9,120 1,903 6,670 1,242 - - 6,300 1,877P110 HCE 4,490 9,100 9,070 10,100 9,910 2,162 6,670 1,395 - - 6,300 2,074Q125 3,680 9,100 9,070 10,100 9,910 2,162 6,670 1,395 - - 6,300 2,074Q125 HC 4,520 9,100 9,070 10,100 9,910 2,162 6,670 1,395 - - 6,300 2,074Q125 HCE 4,520 9,830 9,800 10,910 10,340 2,335 6,670 1,494 - - 6,300 2,192J55 3,290 4,370 4,360 4,840 4,390 1,035 - - - - - -K55 3,290 4,370 4,360 4,840 5,560 1,035 - - - - - -N80 3,870 6,360 6,340 7,040 5,920 1,505 - - - - - -L80 3,870 6,360 6,340 7,040 6,790 1,505 - - - - - -L80 1Cr 3,870 6,360 6,340 7,040 6,790 1,505 - - - - - -L80 HC 5,400 6,360 6,340 7,040 6,790 1,505 - - - - - -L80 IRP 3,870 6,360 6,340 7,040 6,790 1,505 - - - - - -L80 HCE 5,400 6,960 6,930 7,700 6,790 1,646 - - - - - -C90 4,060 7,160 7,130 7,920 7,890 1,693 - - - - - -R95 4,180 7,560 7,530 8,360 7,550 1,788 - - - - - -T95 4,180 7,560 7,530 8,360 8,340 1,788 - - - - - -T95 HC 5,490 7,560 7,530 8,360 8,340 1,788 - - - - - -




Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

11 3/4 65.00 64.03 0.534 18.816 10.526 10.625

11 3/4 71.00 69.48 0.582 20.420 10.430 N/A

11 3/4 75.00 73.54 0.618 21.613 10.358 N/A

pg. 82 / Vallourec USA Corporation / Performance Data 11 3/4” - 26”





Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

11 3/4 75.00 73.54 0.618 21.613 10.358 N/A

11 3/4 79.00 77.80 0.656 22.863 10.282 N/A

11 7/8 71.80 70.26 0.582 20.648 10.555 10.625

T95 E 4,280 7,950 7,920 8,800 8,340 1,882 - - - - - -T95 HCE 5,490 7,950 7,920 8,800 8,340 1,882 - - - - - -P110 4,480 8,750 8,710 9,680 9,990 2,070 - - - - - -P110 MS 4,480 8,750 8,710 9,680 9,990 2,070 - - - - - -P110 HCE 5,770 9,940 9,900 11,000 10,850 2,352 - - - - - -Q125 4,690 9,940 9,900 11,000 10,850 2,352 - - - - - -Q125 HC 5,810 9,940 9,900 11,000 10,850 2,352 - - - - - -Q125 HCE 5,810 10,740 10,690 11,880 11,320 2,540 - - - - - -J55 3,970 4,770 4,740 5,250 4,790 1,123 - - - - - -K55 3,970 4,770 4,740 5,250 6,070 1,123 - - - - - -N80 4,880 6,930 6,900 7,640 6,470 1,634 - - - - - -L80 4 ,880 6,930 6,900 7,640 7,430 1,634 - - - - - -L80 1Cr 4,880 6,930 6,900 7,640 7,430 1,634 - - - - - -L80 HC 6,290 6,930 6,900 7,640 7,430 1,634 - - - - - -L80 IRP 4,880 6,930 6,900 7,640 7,430 1,634 - - - - - -L80 HCE 6,290 7,580 7,550 8,360 7,430 1,787 - - - - - -C90 5,130 7,800 7,760 8,600 8,630 1,838 - - - - - -R95 5,240 8,230 8,200 9,070 8,260 1,940 - - - - - -T95 5,240 8,230 8,200 9,070 9,120 1,940 - - - - - -T95 HC 6,760 8,230 8,200 9,070 9,120 1,940 - - - - - -T95 E 5,330 8,670 8,630 9,550 9,120 2,042 - - - - - -T95 HCE 6,760 8,670 8,630 9,550 9,120 2,042 - - - - - -P110 5,470 9,530 9,490 10,510 10,920 2,246 - - - - - -P110 HCE 7,250 10,840 10,780 11,940 11,870 2,552 - - - - - -C110 5,470 9,530 9,490 10,510 10,050 2,246 - - - - - -Q125 5,760 10,840 10,780 11,940 11,870 2,552 - - - - - -Q125 HC 7,370 10,840 10,780 11,940 11,870 2,552 - - - - - -Q125 HCE 7,370 11,700 11,650 12,900 12,390 2,757 - - - - - -J55 4,470 5,060 5,040 5,560 5,100 1,189 - - - - - -K55 4,470 5,060 5,040 5,560 6,460 1,189 - - - - - -N80 5,630 7,360 7,320 8,090 6,890 1,729 - - - - - -L80 5,630 7,360 7,320 8,090 7,900 1,729 - - - - - -L80 1Cr 5,630 7,360 7,320 8,090 7,900 1,729 - - - - - -L80 HC 7,040 7,360 7,320 8,090 7,900 1,729 - - - - - -L80 IRP 5,630 7,360 7,320 8,090 7,900 1,729 - - - - - -L80 HCE 7,040 8,050 8,010 8,850 7,900 1,891 - - - - - -

C90 5,990 8,280 8,240 9,100 9,190 1,945 - - - - - -R95 6,150 8,740 8,700 9,610 8,790 2,053 - - - - - -T95 6,150 8,740 8,700 9,610 9,710 2,053 - - - - - -T95 HC 7,690 8,740 8,700 9,610 9,710 2,053 - - - - - -T95 E 6,300 9,200 9,150 10,120 9,710 2,161 - - - - - -T95 HCE 7,690 9,200 9,150 10,120 9,710 2,161 - - - - - -P110 6,540 10,120 10,070 11,130 11,630 2,377 - - - - - -P110 HCE 8,430 11,510 11,440 12,640 12,640 2,702 - - - - - -C110 6,540 10,120 10,070 11,130 10,700 2,377 - - - - - -Q125 6,810 11,510 11,440 12,640 12,640 2,702 - - - - - -Q125 HC 8,630 11,510 11,440 12,640 12,640 2,702 - - - - - -Q125 HCE 8,630 12,430 12,360 13,660 13,190 2,918 - - - - - -J55 5,000 5,370 5,340 5,890 5,430 1,257 - - - - - -K55 5,000 5,370 5,340 5,890 6,870 1,257 - - - - - -N80 6,430 7,820 7,770 8,560 7,330 1,829 - - - - - -L80 6,430 7,820 7,770 8,560 8,410 1,829 - - - - - -L80 1Cr 6,430 7,820 7,770 8,560 8,410 1,829 - - - - - -L80 HC 7,780 7,820 7,770 8,560 8,410 1,829 - - - - - -L80 IRP 6,430 7,820 7,770 8,560 8,410 1,829 - - - - - -L80 HCE 7,780 8,550 8,500 9,370 8,410 2,001 - - - - - -C90 6,890 8,790 8,740 9,630 9,780 2,058 - - - - - -R95 7,110 9,280 9,230 10,170 9,350 2,172 - - - - - -T95 7,110 9,280 9,230 10,170 10,330 2,172 - - - - - -T95 HC 8,620 9,280 9,230 10,170 10,330 2,172 - - - - - -T95 E 7,310 9,770 9,710 10,710 10,330 2,286 - - - - - -T95 HCE 8,620 9,770 9,710 10,710 10,330 2,286 - - - - - -P110 7,670 10,750 10,680 11,780 12,380 2,515 - - - - - -P110 HCE 9,690 12,210 12,140 13,380 13,450 2,858 - - - - - -C110 7,670 10,750 10,680 11,780 11,390 2,515 - - - - - -Q125 8,120 12,210 12,140 13,380 13,450 2,858 - - - - - -Q125 HC 9,990 12,210 12,140 13,380 13,450 2,858 - - - - - -Q125 HCE 9,990 13,190 13,110 14,450 14,040 3,087 - - - - - -J55 3,880 4,720 4,700 5,200 4,740 1,136 - - - - - -K55 3,880 4,720 4,700 5,200 6,010 1,136 - - - - - -N80 4,750 6,860 6,830 7,570 6,400 1,652 - - - - - -L80 4,750 6,860 6,830 7,570 7,340 1,652 - - - - - -




Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

11 7/8 71.80 70.26 0.582 20.648 10.555 10.625

13 3/8 54.50 52.79 0.380 15.513 12.459 N/A

13 3/8 61.00 59.50 0.430 17.487 12.359 N/A

13 3/8 68.00 66.17 0.480 19.445 12.259 N/A






Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

13 3/8 68.00 66.17 0.480 19.445 12.259 N/A

13 3/8 72.00 70.67 0.514 20.768 12.191 12.250

13 3/8 77.00 75.40 0.550 22.160 12.119 N/A

L80 1Cr 4,750 6,860 6,830 7,570 7,340 1,652 - - - - - -L80 HC 6,160 6,860 6,830 7,570 7,340 1,652 - - - - - -L80 IRP 4,750 6,860 6,830 7,570 7,340 1,652 - - - - - -L80 HCE 6,160 7,500 7,470 8,270 7,340 1,807 - - - - - -C90 4,980 7,720 7,680 8,510 8,540 1,858 - - - - - -R95 5,080 8,150 8,110 8,980 8,170 1,962 - - - - - -T95 5,080 8,150 8,110 8,980 9,020 1,962 - - - - - -T95 HC 6,590 8,150 8,110 8,980 9,020 1,962 - - - - - -T95 E 5,170 8,580 8,540 9,460 9,020 2,065 - - - - - -T95 HCE 6,590 8,580 8,540 9,460 9,020 2,065 - - - - - -P110 5,290 9,430 9,390 10,400 10,800 2,271 - - - - - -P110 HCE 7,190 10,720 10,670 11,820 11,740 2,581 - - - - - -C110 5,290 9,430 9,390 10,400 9,940 2,271 - - - - - -Q125 5,630 10,720 10,670 11,820 11,740 2,581 - - - - - -Q125 HC 7,400 10,720 10,670 11,820 11,740 2,581 - - - - - -Q125 HCE 7,400 11,580 11,520 12,770 12,250 2,788 - - - - - -J55 1,130 2,730 2,730 3,070 2,710 853 2,730 514 - - 2,730 909K55 1,130 2,730 2,730 3,070 3,440 853 2,730 547 - - 2,730 1,038J55 1,540 3,090 3,090 3,460 3,080 962 3,090 595 - - 3,090 1,025K55 1,540 3,090 3,090 3,460 3,900 962 3,090 633 - - 3,090 1,170J55 1,950 3,450 3,450 3,850 3,440 1,069 3,450 675 - - 3,450 1,140K55 1,950 3,450 3,450 3,850 4,360 1,069 3,450 718 - - 3,450 1,300N80 2,260 5,020 5,010 5,610 4,650 1,556 4,550 963 - - 4,930 1,585L80 2,260 5,020 5,010 5,610 5,320 1,556 4,550 952 - - 4,930 1,545L80 1Cr 2,260 5,020 5,010 5,610 5,320 1,556 4,550 952 - - 4,930 1,545L80 HC 2,820 5,020 5,010 5,610 5,320 1,556 4,550 952 - - 4,930 1,545L80 IRP 2,260 5,020 5,010 5,610 5,320 1,556 4,550 952 - - 4,930 1,545L80 HCE 2,820 5,500 5,480 6,130 5,320 1,701 4,550 1,023 - - 4,930 1,618C90 2,320 5,650 5,640 6,310 6,180 1,750 4,550 1,057 - - 4,930 1,683R95 2,340 5,970 5,950 6,660 5,920 1,847 4,550 1,114 - - 4,930 1,772T95 2,340 5,970 5,950 6,660 6,530 1,847 4,550 1,114 - - 4,930 1,772T95 HC 2,870 5,970 5,950 6,660 6,530 1,847 4,550 1,114 - - 4,930 1,772T95 E 2,330 6,280 6,260 7,010 6,530 1,945 4,550 1,161 - - 4,930 1,821T95 HCE 2,870 6,280 6,260 7,010 6,530 1,945 4,550 1,161 - - 4,930 1,821P110 2,330 6,910 6,890 7,710 7,820 2,139 5,220 1,297 - - 4,930 2,079P110 HCE 2,910 7,850 7,830 8,760 8,500 2,431 5,220 1,458 - - 4,930 2,306

Q125 2,330 7,850 7,830 8,760 8,500 2,431 5,220 1,458 - - 4,930 2,306Q125 HC 2,930 7,850 7,830 8,760 8,500 2,431 5,220 1,458 - - 4,930 2,306Q125 HCE 2,930 8,480 8,460 9,460 8,870 2,625 5,220 1,563 - - 4,930 2,444N80 2,670 5,380 5,360 5,990 4,990 1,661 4,550 1,040 - - 4,930 1,693L80 2,670 5,380 5,360 5,990 5,710 1,661 4,550 1,029 - - 4,930 1,650L80 1Cr 2,670 5,380 5,360 5,990 5,710 1,661 4,550 1,029 - - 4,930 1,650L80 HC 3,410 5,380 5,360 5,990 5,710 1,661 4,550 1,029 - - 4,930 1,650L80 IRP 2,670 5,380 5,360 5,990 5,710 1,661 4,550 1,029 - - 4,930 1,650L80 HCE 3,410 5,880 5,870 6,550 5,710 1,817 4,550 1,105 - - 4,930 1,729C90 2,780 6,050 6,040 6,740 6,630 1,869 4,550 1,142 - - 4,930 1,797R95 2,830 6,390 6,370 7,110 6,350 1,973 4,550 1,204 - - 4,930 1,893T95 2,830 6,390 6,370 7,110 7,010 1,973 4,550 1,204 - - 4,930 1,893T95 HC 3,490 6,390 6,370 7,110 7,010 1,973 4,550 1,204 - - 4,930 1,893T95 E 2,850 6,730 6,710 7,490 7,010 2,077 4,550 1,254 - - 4,930 1,945T95 HCE 3,490 6,730 6,710 7,490 7,010 2,077 4,550 1,254 - - 4,930 1,945P110 2,880 7,400 7,380 8,240 8,390 2,284 5,220 1,401 - - 4,930 2,221P110 HCE 3,560 8,410 8,380 9,360 9,120 2,596 5,220 1,576 - - 4,930 2,463Q125 2,880 8,410 8,380 9,360 9,120 2,596 5,220 1,576 - - 4,930 2,463Q125 HC 3,580 8,410 8,380 9,360 9,120 2,596 5,220 1,576 - - 4,930 2,463Q125 HCE 3,580 9,080 9,050 10,110 9,520 2,804 5,220 1,688 - - 4,930 2,611N80 3,100 5,760 5,740 6,390 5,340 1,773 - - - - - -L80 3,100 5,760 5,740 6,390 6,120 1,773 - - - - - -L80 1Cr 3,100 5,760 5,740 6,390 6,120 1,773 - - - - - -L80 HC 4,090 5,760 5,740 6,390 6,120 1,773 - - - - - -L80 IRP 3,100 5,760 5,740 6,390 6,120 1,773 - - - - - -L80 HCE 4,090 6,300 6,280 6,990 6,120 1,939 - - - - - -C90 3,270 6,480 6,460 7,190 7,110 1,994 - - - - - -R95 3,350 6,840 6,810 7,590 6,810 2,105 - - - - - -T95 3,350 6,840 6,810 7,590 7,520 2,105 - - - - - -T95 HC 4,210 6,840 6,810 7,590 7,520 2,105 - - - - - -T95 E 3,400 7,200 7,170 7,990 7,520 2,216 - - - - - -T95 HCE 4,210 7,200 7,170 7,990 7,520 2,216 - - - - - -P110 3,490 7,920 7,890 8,790 9,000 2,438 - - - - - -P110 HCE 4,330 9,000 8,970 9,990 9,780 2,770 - - - - - -Q125 3,550 9,000 8,970 9,990 9,780 2,770 - - - - - -Q125 HC 4,370 9,000 8,970 9,990 9,780 2,770 - - - - - -




Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

13 3/8 77.00 75.40 0.550 22.160 12.119 N/A

13 5/8 88.20 86.86 0.625 25.525 12.219 12.250

14 82.50 80.73 0.562 23.726 12.689 N/A

14 94.80 93.58 0.656 27.500 12.501 N/A

14 99.30 97.91 0.688 28.773 12.437 N/A






Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

14 99.30 97.91 0.688 28.773 12.437 N/A

14 103.50 102.21 0.720 30.039 12.373 N/A

14 110.00 109.17 0.772 32.082 12.269 N/A

14 114.00 112.89 0.800 33.175 12.213 12.250

14 115.00 114.48 0.812 33.642 12.189 12.250

Q125 HCE 4,370 9,710 9,680 10,790 10,210 2,992 - - - - - -N80 3,980 6,420 6,400 7,100 5,980 2,042 - - - - - -L80 3,980 6,420 6,400 7,100 6,860 2,042 - - - - - -L80 1Cr 3,980 6,420 6,400 7,100 6,860 2,042 - - - - - -L80 HC 5,340 6,420 6,400 7,100 6,860 2,042 - - - - - -L80 IRP 3,980 6,420 6,400 7,100 6,860 2,042 - - - - - -L80 HCE 5,340 7,020 7,000 7,770 6,860 2,233 - - - - - -C90 4,130 7,220 7,200 7,990 7,970 2,297 - - - - - -R95 4,260 7,630 7,600 8,430 7,630 2,425 - - - - - -T95 4,260 7,630 7,600 8,430 8,420 2,425 - - - - - -T95 HC 5,620 7,630 7,600 8,430 8,420 2,425 - - - - - -T95 E 4,370 8,030 7,990 8,880 8,420 2,553 - - - - - -T95 HCE 5,620 8,030 7,990 8,880 8,420 2,553 - - - - - -P110 4,570 8,830 8,790 9,760 10,080 2,808 - - - - - -P110 HCE 5,950 10,030 9,990 11,100 10,960 3,191 - - - - - -C110 4,570 8,830 8,790 9,760 9,280 2,808 - - - - - -Q125 4,800 10,030 9,990 11,100 10,960 3,191 - - - - - -Q125 HC 5,970 10,030 9,990 11,100 10,960 3,191 - - - - - -Q125 HCE 5,970 10,840 10,790 11,980 11,430 3,446 - - - - - -K55 2,420 3,860 3,850 4,290 4,890 1,305 - - - - - -N80 2,940 5,620 5,600 6,250 5,210 1,898 - - - - - -L80 2,940 5,620 5,600 6,250 5,970 1,898 - - - - - -L80 HC 3,840 5,620 5,600 6,250 5,970 1,898 - - - - - -R95 3,160 6,670 6,650 7,420 6,640 2,254 - - - - - -K55 3,530 4,510 4,490 4,980 5,740 1,513 - - - - - -N80 4,220 6,560 6,530 7,250 6,110 2,200 - - - - - -L80 4,220 6,560 6,530 7,250 7,010 2,200 - - - - - -L80 HC 5,600 6,560 6,530 7,250 7,010 2,200 - - - - - -R95 4,450 7,790 7,760 8,610 7,800 2,613 - - - - - -P110 4,800 9,020 8,980 9,960 10,310 3,025 - - - - - -P110 HC 4,800 9,020 8,980 9,960 10,310 3,025 - - - - - -C110 4,800 9,020 8,980 9,960 9,490 3,025 - - - - - -Q125 5,060 10,250 10,210 11,320 11,200 3,438 - - - - - -Q125 HC 6,330 10,250 10,210 11,320 11,200 3,438 - - - - - -K55 3,900 4,730 4,710 5,210 6,020 1,583 - - - - - -N80 4,780 6,880 6,850 7,580 6,420 2,302 - - - - - -

L80 4,780 6,880 6,850 7,580 7,370 2,302 - - - - - -L80 HC 6,200 6,880 6,850 7,580 7,370 2,302 - - - - - -R95 5,120 8,170 8,130 9,010 8,190 2,733 - - - - - -P110 5,330 9,460 9,420 10,430 10,830 3,165 - - - - - -P110 HC 7,100 9,460 9,420 10,430 10,830 3,165 - - - - - -C110 5,330 9,460 9,420 10,430 9,970 3,165 - - - - - -Q125 5,660 10,750 10,700 11,850 11,770 3,597 - - - - - -Q125 HC 7,220 10,750 10,700 11,850 11,770 3,597 - - - - - -N80 5,340 7,200 7,160 7,920 6,730 2,403 - - - - - -L80 5,340 7,200 7,160 7,920 7,720 2,403 - - - - - -L80 HC 6,760 7,200 7,160 7,920 7,720 2,403 - - - - - -R95 5,800 8,550 8,510 9,410 8,590 2,854 - - - - - -P110 6,130 9,900 9,850 10,890 11,360 3,304 - - - - - -P110 HC 7,980 9,900 9,850 10,890 11,360 3,304 - - - - - -C110 6,130 9,900 9,850 10,890 10,450 3,304 - - - - - -Q125 6,330 11,250 11,190 12,380 12,340 3,755 - - - - - -Q125 HC 8,140 11,250 11,190 12,380 12,340 3,755 - - - - - -N80 6,260 7,720 7,670 8,460 7,230 2,567 - - - - - -L80 6,260 7,720 7,670 8,460 8,300 2,567 - - - - - -L80 HC 7,630 7,720 7,670 8,460 8,300 2,567 - - - - - -R95 6,900 9,170 9,110 10,050 9,230 3,048 - - - - - -P110 7,430 10,620 10,550 11,640 12,220 3,529 - - - - - -P110 HC 9,430 10,620 10,550 11,640 12,220 3,529 - - - - - -C110 7,430 10,620 10,550 11,640 11,240 3,529 - - - - - -Q125 7,840 12,060 11,990 13,230 13,280 4,010 - - - - - -Q125 HC 9,700 12,060 11,990 13,230 13,280 4,010 - - - - - -N80 6,750 8,000 7,950 8,760 7,500 2,654 - - - - - -L80 6,750 8,000 7,950 8,760 8,620 2,654 - - - - - -L80 HC 8,070 8,000 7,950 8,760 8,620 2,654 - - - - - -R95 7,500 9,500 9,440 10,400 9,580 3,152 - - - - - -P110 8,130 11,000 10,930 12,040 12,680 3,649 - - - - - -P110 HC 10,200 11,000 10,930 12,040 12,680 3,649 - - - - - -C110 8,130 11,000 10,930 12,040 11,670 3,649 - - - - - -Q125 8,650 12,500 12,420 13,680 13,780 4,147 - - - - - -Q125 HC 10,540 12,500 12,420 13,680 13,780 4,147 - - - - - -N80 6,960 8,120 8,070 8,880 7,620 2,691 - - - - - -




Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

14 115.00 114.48 0.812 33.642 12.189 12.250

14 116.00 115.53 0.820 33.953 12.173 12.250

14 120.00 119.49 0.850 35.115 12.113 N/A

16 65.00 62.64 0.375 18.408 15.063 N/A

16 84.00 82.05 0.495 24.112 14.823 N/A

16 75.00 72.86 0.438 21.414 14.937 N/A






Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

16 84.00 82.05 0.495 24.112 14.823 N/A

16 94.50 92.75 0.562 27.257 14.689 N/A

16 97.00 94.81 0.575 27.864 14.663 N/A

L80 6,960 8,120 8,070 8,880 8,750 2,691 - - - - - -L80 HC 8,100 8,880 8,820 9,710 8,750 2,944 - - - - - -R95 7,750 9,640 9,580 10,540 9,730 3,196 - - - - - -P110 8,430 11,170 11,090 12,210 12,880 3,701 - - - - - -P110 HC 10,250 12,690 12,600 13,870 13,920 4,205 - - - - - -C110 8,430 11,170 11,090 12,210 11,850 3,701 - - - - - -Q125 8,990 12,690 12,600 13,870 14,000 4,205 - - - - - -Q125 HC 10,560 12,690 12,600 13,870 14,000 4,205 - - - - - -N80 7,100 8,200 8,150 8,960 7,700 2,716 - - - - - -L80 7,100 8,200 8,150 8,960 8,840 2,716 - - - - - -L80 HC 8,120 8,200 8,150 8,960 8,840 2,716 - - - - - -R95 7,920 9,740 9,670 10,640 9,830 3,226 - - - - - -P110 8,630 11,280 11,200 12,320 13,020 3,735 - - - - - -P110 HC 10,350 11,280 11,200 12,320 13,020 3,735 - - - - - -C110 8,630 11,280 11,200 12,320 11,980 3,735 - - - - - -Q125 9,230 12,810 12,730 14,000 14,150 4,244 - - - - - -Q125 HC 10,580 12,810 12,730 14,000 14,150 4,244 - - - - - -N80 7,630 8,500 8,440 9,270 7,990 2,809 - - - - - -L80 7,630 8,500 8,440 9,270 9,180 2,809 - - - - - -L80 HC 8,160 8,500 8,440 9,270 9,180 2,809 - - - - - -R95 8,560 10,090 10,020 11,010 10,210 3,336 - - - - - -P110 9,380 11,690 11,600 12,750 13,520 3,863 - - - - - -P110 HC 10,400 11,690 11,600 12,750 13,520 3,863 - - - - - -C110 9,380 11,690 11,600 12,750 12,440 3,863 - - - - - -Q125 10,090 13,280 13,190 14,490 14,690 4,389 - - - - - -Q125 HC 10,600 13,280 13,190 14,490 14,690 4,389 - - - - - -J55 630 2,260 2,250 2,550 2,230 1,012 2,260 591 - - 2,260 1,031K55 630 2,260 2,250 2,550 2,830 1,012 2,260 625 - - 2,260 1,144J55 1,010 2,630 2,630 2,960 2,610 1,178 2,630 710 - - 2,630 1,200K55 1,010 2,630 2,630 2,960 3,310 1,178 2,630 752 - - 2,630 1,331K55 1,400 2,980 2,970 3,340 3,750 1,326 2,980 865 - - 2,980 1,499N80 1,480 4,330 4,320 4,850 3,990 1,929 3,230 1,167 - - 3,550 1,898L80 1,480 4,330 4,320 4,850 4,570 1,929 3,230 1,156 - - 3,550 1,861L80 HC 1,840 4,330 4,320 4,850 4,570 1,929 3,230 1,156 - - 3,550 1,861C90 1,480 4,870 4,860 5,460 5,310 2,170 3,230 1,284 - - 3,550 2,043C90 HC 1,850 4,870 4,860 5,460 5,310 2,170 3,230 1,284 - - 3,550 2,043

R95 1,480 5,140 5,130 5,760 5,080 2,291 3,230 1,354 - - 3,550 2,153T95 1,480 5,140 5,130 5,760 5,610 2,291 3,230 1,354 - - 3,550 2,153T95 HC 1,860 5,140 5,130 5,760 5,610 2,291 3,230 1,354 - - 3,550 2,153P110 1,480 5,960 5,940 6,670 6,720 2,652 3,230 1,575 - - 3,550 2,518P110 HC 1,860 5,960 5,940 6,670 6,720 2,652 3,230 1,575 - - 3,550 2,518C110 1,480 5,960 5,940 6,670 6,180 2,652 3,230 1,552 - - 3,550 2,444Q125 1,480 6,770 6,760 7,580 7,300 3,014 3,230 1,773 - - 3,550 2,809Q125 HC 1,880 6,770 6,760 7,580 7,300 3,014 3,230 1,773 - - 3,550 2,809K55 1,860 3,380 3,370 3,770 4,270 1,499 - - - - - -N80 2,140 4,920 4,910 5,490 4,550 2,181 - - - - - -L80 2,140 4,920 4,910 5,490 5,210 2,181 - - - - - -L80 HC 2,650 4,920 4,910 5,490 5,210 2,181 - - - - - -C90 2,180 5,530 5,520 6,180 6,050 2,453 - - - - - -C90 HC 2,660 5,530 5,520 6,180 6,050 2,453 - - - - - -R95 2,190 5,840 5,830 6,520 5,790 2,589 - - - - - -T95 2,190 5,840 5,830 6,520 6,390 2,589 - - - - - -T95 HC 2,690 5,840 5,830 6,520 6,390 2,589 - - - - - -P110 2,190 6,760 6,750 7,550 7,650 2,998 - - - - - -P110 HC 2,730 6,760 6,750 7,550 7,650 2,998 - - - - - -C110 2,190 6,760 6,750 7,550 7,040 2,998 - - - - - -Q125 2,190 7,680 7,670 8,580 8,310 3,407 - - - - - -Q125 HC 2,740 7,680 7,670 8,580 8,310 3,407 - - - - - -K55 1,950 3,460 3,450 3,860 4,370 1,533 - - - - - -N80 2,270 5,030 5,020 5,610 4,660 2,229 - - - - - -L80 2,270 5,030 5,020 5,610 5,330 2,229 - - - - - -L80 HC 2,650 5,030 5,020 5,610 5,330 2,229 - - - - - -C90 2,330 5,660 5,650 6,310 6,190 2,508 - - - - - -C90 HC 2,660 5,660 5,650 6,310 6,190 2,508 - - - - - -R95 2,350 5,970 5,960 6,670 5,930 2,647 - - - - - -T95 2,350 5,970 5,960 6,670 6,540 2,647 - - - - - -T95 HC 2,690 5,970 5,960 6,670 6,540 2,647 - - - - - -P110 2,340 6,920 6,900 7,720 7,830 3,065 - - - - - -P110 HC 2,730 6,920 6,900 7,720 7,830 3,065 - - - - - -C110 2,340 6,920 6,900 7,720 7,210 3,065 - - - - - -Q125 2,340 7,860 7,840 8,770 8,510 3,483 - - - - - -Q125 HC 2,740 7,860 7,840 8,770 8,510 3,483 - - - - - -




Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

16 109.00 107.60 0.656 31.622 14.501 N/A

16 118.00 116.83 0.715 34.334 14.383 N/A

16 128.00 127.06 0.781 37.341 14.251 N/A






Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

16 128.00 127.06 0.781 37.341 14.251 N/A

16 138.00 137.66 0.850 40.456 14.113 N/A

16 147.00 146.19 0.906 42.962 14.001 N/A

18 94.00 93.54 0.500 27.489 16.813 N/A

18 105.00 104.76 0.562 30.788 16.689 N/A

N80 3,080 5,740 5,720 6,370 5,330 2,530 - - - - - -L80 3,080 5,740 5,720 6,370 6,110 2,530 - - - - - -L80 HC 4,060 5,740 5,720 6,370 6,110 2,530 - - - - - -C90 3,250 6,460 6,440 7,170 7,090 2,846 - - - - - -C90 HC 4,080 6,460 6,440 7,170 7,090 2,846 - - - - - -R95 3,320 6,820 6,790 7,570 6,790 3,004 - - - - - -T95 3,320 6,820 6,790 7,570 7,490 3,004 - - - - - -T95 HC 4,180 6,820 6,790 7,570 7,490 3,004 - - - - - -P110 3,470 7,890 7,870 8,770 8,980 3,478 - - - - - -P110 HC 4,300 7,890 7,870 8,770 8,980 3,478 - - - - - -C110 3,470 7,890 7,870 8,770 8,260 3,478 - - - - - -Q125 3,520 8,970 8,940 9,960 9,750 3,953 - - - - - -Q125 HC 4,330 8,970 8,940 9,960 9,750 3,953 - - - - - -N80 3,690 6,260 6,230 6,930 5,820 2,747 - - - - - -L80 3,690 6,260 6,230 6,930 6,670 2,747 - - - - - -L80 HC 5,030 6,260 6,230 6,930 6,670 2,747 - - - - - -C90 3,920 7,040 7,010 7,790 7,760 3,090 - - - - - -C90 HC 5,150 7,040 7,010 7,790 7,760 3,090 - - - - - -R95 4,030 7,430 7,400 8,220 7,420 3,262 - - - - - -T95 4,030 7,430 7,400 8,220 8,190 3,262 - - - - - -T95 HC 5,260 7,430 7,400 8,220 8,190 3,262 - - - - - -P110 4,300 8,600 8,570 9,520 9,810 3,777 - - - - - -P110 HC 5,490 8,600 8,570 9,520 9,810 3,777 - - - - - -C110 4,300 8,600 8,570 9,520 9,030 3,777 - - - - - -Q125 4,490 9,780 9,740 10,820 10,660 4,292 - - - - - -Q125 HC 5,540 9,780 9,740 10,820 10,660 4,292 - - - - - -N80 4,700 6,830 6,800 7,540 6,380 2,987 - - - - - -L80 4,700 6,830 6,800 7,540 7,310 2,987 - - - - - -L80 HC 6,110 6,830 6,800 7,540 7,310 2,987 - - - - - -C90 4,930 7,690 7,650 8,480 8,500 3,361 - - - - - -C90 HC 6,230 7,690 7,650 8,480 8,500 3,361 - - - - - -R95 5,020 8,120 8,080 8,950 8,130 3,547 - - - - - -T95 5,020 8,120 8,080 8,950 8,980 3,547 - - - - - -T95 HC 6,530 8,120 8,080 8,950 8,980 3,547 - - - - - -P110 5,240 9,400 9,350 10,360 10,760 4,108 - - - - - -P110 HC 6,980 9,400 9,350 10,360 10,760 4,108 - - - - - -

C110 5,240 9,400 9,350 10,360 9,900 4,108 - - - - - -Q125 5,570 10,680 10,630 11,780 11,690 4,668 - - - - - -Q125 HC 7,090 10,680 10,630 11,780 11,690 4,668 - - - - - -N80 5,760 7,440 7,400 8,170 6,960 3,236 - - - - - -L80 5,760 7,440 7,400 8,170 7,990 3,236 - - - - - -L80 HC 7,170 7,440 7,400 8,170 7,990 3,236 - - - - - -C90 6,130 8,370 8,320 9,190 9,290 3,641 - - - - - -C90 HC 7,300 8,370 8,320 9,190 9,290 3,641 - - - - - -R95 6,300 8,830 8,780 9,700 8,880 3,843 - - - - - -T95 6,300 8,830 8,780 9,700 9,810 3,843 - - - - - -T95 HC 7,840 8,830 8,780 9,700 9,810 3,843 - - - - - -P110 6,730 10,230 10,170 11,230 11,750 4,450 - - - - - -P110 HC 8,640 10,230 10,170 11,230 11,750 4,450 - - - - - -C110 6,730 10,230 10,170 11,230 10,810 4,450 - - - - - -Q125 7,020 11,620 11,560 12,770 12,770 5,057 - - - - - -Q125 HC 8,850 11,620 11,560 12,770 12,770 5,057 - - - - - -N80 6,620 7,930 7,880 8,680 7,430 3,437 - - - - - -L80 6,620 7,930 7,880 8,680 8,540 3,437 - - - - - -L80 HC 7,960 7,930 7,880 8,680 8,540 3,437 - - - - - -C90 7,110 8,920 8,860 9,770 9,930 3,867 - - - - - -C90 HC 8,010 8,920 8,860 9,770 9,930 3,867 - - - - - -R95 7,340 9,410 9,360 10,310 9,490 4,081 - - - - - -T95 7,340 9,410 9,360 10,310 10,490 4,081 - - - - - -T95 HC 8,850 9,410 9,360 10,310 10,490 4,081 - - - - - -P110 7,950 10,900 10,830 11,940 12,560 4,726 - - - - - -P110 HC 10,000 10,900 10,830 11,940 12,560 4,726 - - - - - -C110 7,950 10,900 10,830 11,940 11,560 4,726 - - - - - -Q125 8,440 12,390 12,310 13,560 13,650 5,370 - - - - - -Q125 HC 10,330 12,390 12,310 13,560 13,650 5,370 - - - - - -N80 1,060 3,890 3,880 4,370 4,460 2,199 - - - - - - L80 1,060 3,890 3,880 4,370 4,510 2,199 - - - - - - R95 1,060 4,620 4,610 5,190 5,020 2,611 - - - - - - P110 1,060 5,350 5,340 6,010 6,010 3,024 - - - - - - Q125 1,060 6,080 6,070 6,830 6,530 3,436 - - - - - - N80 1,520 4,370 4,360 4,900 5,020 2,463 - - - - - - L80 1,520 4,370 4,360 4,900 5,090 2,463 - - - - - -




Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

18 117.00 116.09 0.625 34.116 16.563 N/A

18 5/8 87.50 84.59 0.435 24.858 17.568 N/A

18 5/8 96.50 94.05 0.485 27.639 17.468 17.500

18 5/8 136.00 132.84 0.693 39.040 17.052 N/A

18 5/8 114.00 111.70 0.579 32.825 17.280 N/A






Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

18 5/8 139.00 137.81 0.720 40.500 16.998 17.000

20 94.00 91.59 0.438 26.918 18.937 N/A

20 106.50 104.23 0.500 30.631 18.813 N/A

20 118.50 116.98 0.563 34.379 18.687 N/A

20 133.00 131.45 0.635 38.631 18.543 N/A

20 147.00 146.21 0.709 42.969 18.395 N/A

20 169.00 166.56 0.812 48.948 18.189 N/A

R95 1,520 5,190 5,180 5,820 5,660 2,925 - - - - - - P110 1,520 6,010 6,000 6,730 6,780 3,387 - - - - - - Q125 1,520 6,830 6,820 7,650 7,370 3,849 - - - - - - N80 2,080 4,860 4,850 5,430 5,600 2,729 - - - - - - L80 2,080 4,860 4,850 5,430 5,680 2,729 - - - - - - R95 2,110 5,770 5,760 6,450 6,310 3,241 - - - - - - P110 2,110 6,680 6,670 7,470 7,560 3,753 - - - - - - Q125 2,110 7,600 7,580 8,480 8,220 4,264 - - - - - - K55 630 2,250 2,250 2,540 2,820 1,367 - - - - - -N80 630 3,270 3,270 3,690 3,000 1,989 - - - - - -L80 630 3,270 3,270 3,690 3,430 1,989 - - - - - -L80 HC 630 3,270 3,270 3,690 3,430 1,989 - - - - - -R95 630 3,880 3,880 4,380 3,820 2,362 - - - - - -P110 630 4,500 4,490 5,070 5,040 2,734 - - - - - -P110 HC 630 4,500 4,490 5,070 5,040 2,734 - - - - - -K55 870 2,510 2,500 2,820 3,150 1,520 - - - - - -N80 870 3,650 3,640 4,100 3,350 2,211 - - - - - -L80 870 3,650 3,640 4,100 3,830 2,211 - - - - - -L80 HC 870 3,650 3,640 4,100 3,830 2,211 - - - - - -R95 870 4,330 4,320 4,870 4,260 2,626 - - - - - -P110 870 5,010 5,010 5,640 5,630 3,040 - - - - - -P110 HC 870 5,010 5,010 5,640 5,630 3,040 - - - - - -K55 1,420 2,990 2,990 3,350 3,770 1,805 - - - - - -N80 1,500 4,350 4,340 4,880 4,010 2,626 - - - - - -L80 1,500 4,350 4,340 4,880 4,590 2,626 - - - - - -L80 HC 1,500 4,350 4,340 4,880 4,590 2,626 - - - - - -R95 1,500 5,170 5,160 5,790 5,110 3,118 - - - - - -P110 1,500 5,980 5,970 6,710 6,750 3,611 - - - - - -P110 HC 1,500 5,980 5,970 6,710 6,750 3,611 - - - - - -K55 2,090 3,580 3,570 3,990 4,530 2,147 - - - - - -N80 2,480 5,210 5,200 5,810 4,820 3,123 - - - - - -L80 2,480 5,210 5,200 5,810 5,530 3,123 - - - - - -L80 HC 2,480 5,210 5,200 5,810 5,530 3,123 - - - - - -R95 2,590 6,190 6,170 6,890 6,140 3,709 - - - - - -P110 2,610 7,160 7,140 7,980 8,120 4,294 - - - - - -P110 HC 2,610 7,160 7,140 7,980 8,120 4,294 - - - - - -

K55 2,250 3,720 3,710 4,140 4,710 2,228 - - - - - -N80 2,710 5,410 5,400 6,020 5,020 3,240 - - - - - -L80 2,710 5,410 5,400 6,020 5,750 3,240 - - - - - -L80 HC 2,710 5,410 5,400 6,020 5,750 3,240 - - - - - -R95 2,870 6,430 6,410 7,150 6,390 3,848 - - - - - -P110 2,930 7,440 7,420 8,280 8,450 4,455 - - - - - -P110 HC 2,930 7,440 7,420 8,280 8,450 4,455 - - - - - -K55 520 2,110 2,110 2,380 2,640 1,480 2,110 824 2,110 955 2,110 1,479K55 770 2,410 2,400 2,710 3,020 1,685 2,400 960 2,410 1,113 2,310 1,683N80 770 3,500 3,500 3,940 3,220 2,450 2,400 1,307 2,410 1,511 2,310 2,281L80 770 3,500 3,500 3,940 3,680 2,450 2,400 1,296 2,410 1,497 2,310 2,259L80 HC 770 3,500 3,500 3,940 3,680 2,450 2,400 1,296 2,410 1,497 2,310 2,259K55 1,100 2,710 2,710 3,040 3,400 1,891 - - - - - -N80 1,110 3,940 3,930 4,430 3,630 2,750 - - - - - -L80 1,110 3,940 3,930 4,430 4,150 2,750 - - - - - -L80 HC 1,110 3,940 3,930 4,430 4,150 2,750 - - - - - -R95 1,110 4,680 4,670 5,260 4,620 3,266 - - - - - -P110 1,110 5,420 5,410 6,090 6,100 3,782 - - - - - -K55 1,490 3,060 3,050 3,420 3,850 2,125 2,400 1,253 2,410 1,453 2,310 2,123N80 1,600 4,450 4,440 4,980 4,100 3,091 2,400 1,707 2,410 1,973 2,310 2,877L80 1,600 4,450 4,440 4,980 4,700 3,091 2,400 1,692 2,410 1,955 2,310 2,849L80 HC 1,600 4,450 4,440 4,980 4,700 3,091 2,400 1,692 2,410 1,955 2,310 2,849R95 1,600 5,280 5,270 5,910 5,220 3,670 2,400 1,985 2,410 2,293 2,310 3,340P110 1,600 6,110 6,100 6,840 6,900 4,249 2,400 2,309 2,410 2,667 2,310 3,887K55 1,900 3,410 3,400 3,810 4,310 2,363 - - - - - -N80 2,190 4,960 4,950 5,540 4,590 3,437 - - - - - -L80 2,190 4,960 4,950 5,540 5,260 3,437 - - - - - -L80 HC 2,190 4,960 4,950 5,540 5,260 3,437 - - - - - -R95 2,250 5,890 5,880 6,580 5,850 4,082 - - - - - -P110 2,250 6,820 6,810 7,620 7,720 4,727 - - - - - -K55 2,500 3,910 3,900 4,340 4,950 2,692 - - - - - -N80 3,020 5,680 5,670 6,310 5,270 3,916 - - - - - -L80 3,020 5,680 5,670 6,310 6,040 3,916 - - - - - -L80 HC 3,020 5,680 5,670 6,310 6,040 3,916 - - - - - -R95 3,250 6,750 6,730 7,500 6,720 4,650 - - - - - -P110 3,370 7,820 7,790 8,680 8,890 5,384 - - - - - -

18 105.00 104.76 0.562 30.788 16.689 N/A




Grade





PET&C API ALT.


IP(Lame’-open)

IP(Lame’-capped)

IP(Lame’-ductile

rupture)Jt.

StrengthJt.

StrengthJt.

StrengthIPIP IP

24 174.00 171.45 0.688 50.387 22.437 N/A

24 189.00 186.41 0.750 54.782 22.313 N/A

26 207.00 202.44 0.750 59.494 24.313 N/A

26 223.00 218.64 0.812 64.254 24.189 N/A

24 162.00 158.61 0.635 46.611 22.543 N/A


Marking and Color Codes

K55 920 2,550 2,540 2,870 3,200 2,564 - - - - - -N80 920 3,700 3,700 4,170 3,410 3,729 - - - - - -K55 1,160 2,760 2,750 3,100 3,470 2,771 - - - - - -N80 1,170 4,010 4,010 4,510 3,700 4,031 - - - - - -L80 1,170 4,010 4,010 4,510 4,230 4,031 - - - - - -R95 1,170 4,770 4,760 5,350 4,700 4,787 - - - - - -P110 1,170 5,520 5,510 6,200 6,210 5,543 - - - - - -K55 1,440 3,010 3,000 3,370 3,790 3,013 - - - - - -N80 1,530 4,380 4,370 4,900 4,040 4,383 - - - - - -L80 1,530 4,380 4,370 4,900 4,620 4,383 - - - - - -R95 1,530 5,200 5,190 5,820 5,140 5,204 - - - - - -P110 1,530 6,020 6,000 6,740 6,780 6,026 - - - - - -K55 1,180 2,780 2,770 3,120 3,490 3,272 - - - - - -N80 1,190 4,040 4,030 4,530 3,720 4,760 - - - - - -L80 1,190 4,040 4,030 4,530 4,260 4,760 - - - - - -R95 1,190 4,800 4,790 5,380 4,730 5,652 - - - - - -K55 1,440 3,010 3,000 3,370 3,780 3,534 - - - - - -N80 1,520 4,370 4,360 4,900 4,030 5,140 - - - - - -R95 1,520 5,190 5,180 5,820 5,130 6,104 - - - - - -

Marking and Color Codes

pg. 95 / Vallourec USA Corporation / Marking

MarkingJu

ly 2

014

Heat TraceabilityVallourec's SLN (Schedule Line Number) is assigned at the time of rolling to provide heat identification and traceability throughout the entire process.

Casing Thread-Type Identification SymbolsShort Round Thread SCLong Round Thread LCButtress Thread BC* Special clearance couplings shall also have a black band.* * Seal-ring couplings shall also have a blue band.

Example 1: 9-5/8” 53.50# Q125 DWC/C

Vallourec Star 5CT-XXXX 9-5/8 53.50 Q1 XXF S S2L2 PXXXXX DWC/C DA 8.500 JtXXX W/O XXXXXX SLN XXXXXX Made in USA XX.X XXXX

manufacturer

license number

API monogram OD

sizenominal wt/ft

grade

X/XX

date of manufacture (last digit of year/ month)

reduced alternative impact test temperature if applicable

seamless process of manufacture

test pressure

type of thread

specialdrift

serialization

heat number

country of origin

length

weight

supplementary requirements if applicable

Example 2: 9-5/8” 53.50# P110MS VAM TOP

Example 3: 5-1/2” 23.00# P110EC VAM SG

SF

end finish

XX

work ordernumber

compatible standards (EC, HC, HCE, RY, E, MS)

Vallourec Star 5CT-XXXX 9-5/8 53.50 P XXF S S2L2 PXXXXX VAM TOP DA 8.500 JtXXX W/O XXXXXX SLN XXXXXX Made in USA XX.X XXXX

manufacturer

license number

API monogram OD

sizenominal wt/ft

grade

X/XX




test pressure

type of thread

specialdrift

serialization

heat number

country of origin

length

weight


SF

end finish

MS

work ordernumber


Vallourec Star 5CT-XXXX 5-1/2 23.00 P XXF S [ ] PXXXXX VAM SG D JtXXX W/O XXXXXX SLN XXXXXX Made in USA XX.X XXXX

manufacturer

license number

API monogram OD

sizenominal wt/ft

grade

X/XX




test pressure

type of thread

drift

serialization

heat number

country of origin

length

weight


SF

end finish

EC

work ordernumber


pg. 96 / Vallourec USA Corporation / Color Codes pg. 97 / Vallourec USA Corporation / Color Codes pg. 98 / Vallourec USA Corporation / Color Codes

Color Codes Color Codes Color Codes

Grade Coupling Pipe color code color for threaded and/or code plain end pipes

Coupling Pipe

Entire Band 1 Band 2 Band 3 Band 4 Band 1 Band 2 Band 3 Band 4 Band 5

J55 tubing Green Green

J55 casing Green White Green

K55 Green Green Green

N80 Type 1 Red Red

N80 Q Red Green Red Green

R95 Brown Brown

L80 Type 1 Red Brown Red Brown

L80 9CR Yellow Yellow Red Brown Yellow Yellow

L80 13CR Yellow Red Brown Yellow

C90 Purple Purple

T95 Silver Silver

C110 White Brown Brown White Brown Brown

P110 White White

Q125 Orange Orange

API Grades - API 9th Edition

No entire color painting

No entire color painting

VMS 55 HC Red Green Green Green Black

L80 Type 1 HC Red Brown Red Brown Black

L80 Type 1 HCE Red Brown Pink Pink Red Brown Black Pink Pink

VM 80 ECL Red Brown Orange Orange Light Red Brown Orange Orange Light

C90 HC Purple Purple Black

T95 E Silver Pink Pink Silver Pink Pink

T95 HC Silver Silver Black

T95 HCE Silver Pink Pink Silver Black Pink Pink

P110 MS White Dark Dark Orange White Dark Dark Orange

P110 RY White Dark Dark White Dark Dark

P110 EC White Light Light White Light Light

P110 HCE White Pink Pink White Black Pink Pink

Q125 HC Orange Orange Black

Q125 HCE Orange Pink Pink Orange Black Pink Pink

Vallourec API Enhanced Grades

(N80 Q coupling)

green green green green

green green green green

blue blue blue blue

blue blue


Coupling Pipe



Coupling Pipe


VM 80 HC Red Green Green Red Green Green

VM 95 HC Brown Green Brown Green

VM 110 HC White Green White Green

VM 125 HC Orange Green Orange Green

VM 125 HYHC Orange Orange Purple Green

VM 140 HC Pink White Green Pink White Green

VM 150 HC Dark White Green Dark White Green

VM 80 HCSS Red Brown Green Orange Orange Red Brown Green Orange Orange

VM 90 HCSS Purple Green Orange Orange Purple Green Orange Orange

VM 95 HCSS Silver Green Orange Orange Silver Green Orange Orange

VM 110 HCSS White Brown Brown Green Orange White Brown Brown Green Orange

VM 125 HCSS Orange Green Silver Silver Orange Green Silver Silver

Vallourec High Collapse Grades

(Q125 coupling)

green green

Vallourec Sour Service & High Collapse Grades

VM 80 SS Red Brown Orange Orange Red Brown Orange Orange

VM 90 SS Purple Orange Orange Purple Orange Orange

VM 95 SS Silver Orange Orange Silver Orange Orange

VM 100 SS Blue Orange Orange Blue Orange Orange

VM 110 SS White Brown Brown Orange White Brown Brown Orange

VM 125 SS Orange Silver Silver Orange Silver Silver

VM 80 IRP Red Brown Brown Orange Orange Red Brown Brown Orange Orange

VM 90 IRP Purple Brown Orange Orange Purple Brown Orange Orange

VM 95 IRP Silver Brown Orange Orange Silver Brown Orange Orange

VM 140 CY Orange Orange Purple

VM 125 CY Orange Brown Purple Orange Brown Purple

VM 130 CY Orange Yellow Purple Orange Yellow Purple

VM 140 CY Orange Purple Orange Purple

Vallourec Sour Service Grades

(T95)

(T95)

(Q125 coupling)

Vallourec HY / CY Grades

VM125HY-VM140CY


Coupling Pipe


Color Codes

pg. 99 / Vallourec USA Corporation / Color Codes

pg. 100 / Vallourec USA Corporation / Color Codes

Color Codes


Coupling Pipe


Vallourec Deep Well Grades

Vallourec Risers Grades

Vallourec 13%Cr Grades

Vallourec Super 13%Cr Grades

greengreen

(R95)

(T95)

VM 140 Pink White Pink White

VM 150 Dark White Dark White

VM 95 R Brown Blue Blue Brown Blue Blue

VM 95 RSS Silver Blue Blue Brown Silver Blue Blue Brown

VM 110 R White Blue Blue White Blue Blue

VM 110 RSS White Brown Brown Blue Blue White Brown Brown Blue Blue

VM 125 R Orange Blue Blue Orange Blue Blue

VM 80 13CR Red Yellow Orange Red Brown Yellow Orange

VM 85 13CR Blue Yellow Blue Yellow

VM 90 13CR Purple Yellow Purple Yellow

VM 95 13CR Brown Yellow Brown Yellow

VM 95 13CRSS Yellow White Green Silver White Green Silver

VM 110 13CRSS Yellow White Green White White Green White

VM 125 13CRSS Yellow White Green Orange White Green Orange

VM 110 13ECRSSCY Yellow White Green White Purple White Green White Purple

Leader in Premium Tubular Solutions

Oct

ober

201

7

USAPh +1 [email protected]

CanadaPh +1 [email protected]

MexicoPh [email protected]

www.vallourec.com

Follow us on Linked.In

vallourec usa corporation octg catalog€¦ · vallourec usa corporation / introduction / pg. 1 ......

Documents