vacuum suction cups ventouses À videflachsauger flat suction cups ventouses plates Ø20mm Ø22mm...
TRANSCRIPT
®V A K U U M S A U G E RV A K U U M S A U G E RVACUUM SUCTION CUPSVACUUM SUCTION CUPSV E N T O U S E S À V I D EV E N T O U S E S À V I D E
HS 03
Für die HolzindustrieFor the woodworking industryPour l'industrie du bois
6/2
00
5
Inhaltsverzeichnis
Balgensauger
Vakuum-Aufspannplatten
Federstößel Flexible Gelenke Kugelgelenke
Spezialformen
Bellows suction cups
Ventouses à soufflets
Vacuum clamping devices
Plaques de serrage
Spring levelers
Plaques de serrage
Flexible joints
Joints flexibles
Ball joints
Joints à rotule
Special shapes
Formes spéciales
Flachsauger
Bemerkungen
Flat suction cups
Notes
Ventouses plates
Remarques
Ø 20 mm - Ø 288 mm
Familien (Sauger und Zubehör)
Familles (ventouses et accessoires)Families (suction cups and accessories)
Serien/ (Ø 30 mm - 300 mm)Series
Serien
Séries avec accessoires
mit ZubehörSeries with accessories
1.9 - 1.12
1.13 - 1.15
1.1 - 1.8
1.0
2.1 - 2.11
2.12
3.1
5.1 - 5.2
6.1 - 6.8
7.1 - 7.3
8.1 - 8.2
8.1F - 8.2F
A 1 - A 5
4.1 - 4.2
4.3
4.4 - 4.5
4.6
3.2 - 3.10
Oval-/Rechtecksauger
Ventouses ovales/rectangulaires
Oval-/rectangular suction cups
45 x15 mm - 400 x 80 mm
Contents Sommaire
Klassiker (Balgen- und Flachsauger)
Ligne Classique (ventoues à soufflets et plates)Classic Line (bellows and flat suction cups)
Trennsauger
Ventouse de séparationSeparating Suction Cup
Ø 11 mm - 350 mm
Dichtprofile / / Joints d'étancheité profilé
Sealing profiles
Kammersauger/ /Ventouses à chambre
Chambered Suction Cup
Handgreifer / SaugheberGrippers / Suction lifters / Grappins
Flow valves
Soupapes hydrauliques
/ Lifting Cylinders
Materials List
Liste de matériaux
Questionaire
Questionaire
Article Numbers
Numéros d’article
Closing valves
Soupapes de fermeture
Strömungsventile
Vakuum-Hubzylinder
Materialtabelle FragebogenArtikelnummern
Schliessventile
Manipulateurs à vide
Bemerkungen Notes Remarques
Bemerkungen: Notes: Remarques:Auf den Seiten 1.9 - 1.12 finden Sie Vor-schläge, wie Vakuumsauger mit Anschluss-teilen, Saugerträgern, Strömumgs- und Tast-ventilen ausgestattet werden können.
Strömungs- und Tastventile werden in denAnwendungen eingesetzt, wo die zu greifen-den Objekte nicht oder nur teilweise vor-handen sind. Sie verhindern ein Zusammen-brechen des Vakuumkreises.
Wir beraten Sie gerne in allen Fragen derVakuumtechnik und konzipieren auf Wunsch Ihre komplette Vakuumanlage.Dazu füllen Sie bitte unsere Fragebögen auf der Seite A 4 und A 5 aus.
Die Art. No. der Vakuumsauger sind teilwei-se mit einem * versehen. Bitte die Art. No.bei Bestellung mit dem gewünschten Mate-rial ergänzen. Die Materialnummern finden Sie am Ende des Katalogs.
Andere Materialien stehen auf Anfrage zurVerfügung.
Zu vielen Saugern in diesem Katalog sindweitere passende Anschlussteile lieferbar.
On the pages 1.9 - 1.12 contain sugges-tions for adding cup fittings, supports, flow and plunger valves.
Flow and plunger valves are used where the objects to be handled are not or onlypartly accessible. They prevent the vacuumfrom breaking down.
We shall be pleased to advise you on mat-ters of vacuum technology and will gladlyhelp you conceive your entire vacuum unit.In this case please complete the question-naire on the pages A 4 and A 5.
Art. Nos. of the cups are partly marked with asterisk (*). When ordering, pleasecomplete the Art. Nos. with the number of the material desired. For materialsnumbers, please seeat catalog end.
Other materials are available on request.
For many cups presented in this catalog, further suitable fittings are available.
Vous trouverez en pages 1.9 - 1.12 des suggestions sur la facon de combiner les ventouses avec des raccords, porteurs, soupapes hydrauliques et palpeurs.
,
Les soupapes hydrauliques et palpeurs sont utilisés dans les cas où les objets à manipuler ne sont pas disponibles où ne le sont que partiellement. Ils évitent une inter-ruption du circuit du vide.
C'est avec plaisir que nous répondrons à toutes vos questions sur le vide et que nousconcevrons le système d'aspiration le mieux adapté à vos besoins. Veuillez à cet effet remplir notre questionnaire à les pages A 4 et A 5.
Les numéros d'article des ventouses sont en partie marqués d'un *. Veuillez com-pléter ce numéro par le matériau requis lorsde la commande. Les numéros de materiaufigurent à la fin de cataloque.
D'autres matériaux sont fournis sur demande.
Il existe encore d'autres raccords pour denombreuses ventouses listées dans cecatalogue.
Allgemeine Information General Information Information générale
Das UnternehmenDie Produkte
Die FIPA GmbH in Ismaning bei Mün-chen ist Spezialist auf dem Gebiet der Vakuum-Technik.Das Vakuumsauger-Programm umfasst ca. 3500 Sauger mit mehr als 20.000 Saugervarianten - weltweit das größte Angebot.
In diesem Katalogauszug sind Sauger dargestellt, die bevorzugt beim Hand-ling von Holzplatten, Leisten, Furnieren oder Kunststoffpanelen eingesetzt werden.
Die Sauger sind in den jeweils ange-gebenen Materialien sofort lieferbar (Zwischenverkauf vorbehalten). Weitere Materialien auf Anfrage.
The CompanyIts Products
L’entrepriseLes produits
Alle in diesem Katalog angegebenen Maßein mm.Technische Änderungen vorbehalten.
FIPA GmbH of Ismaning near Munich specializes in vacuum technology.FIPA offers some 3,500 suction cupsand over 20,000 cup variants, whichis probably the most extensive lineupin the world.
All dimensions given in this catalog arein millimeters. Specifications subject to change without notice.
FIPA GmbH, situé à Ismaning prèsde Munich est spécialisé dans latechnique du vide.Son catalogue présente plus de 3500ventouses sur plus de 20.000 variantes.Ce qui est certainement le plus grandchoix au monde.
Toutes les mesures données dans ce catalogue sont en mm.Sous réserves de modifications techniques.
The suction cups listed here are available from stock in the materials mentioned - subject to prior sale. Further materials are available on request.
Les ventouses sont disponibles en stock dans les matériaux indiqués (sauf vente intermédiaire).Autres matériaux sur commande.
This exerpt lists suction cups prima-rily used for handling wooden boards,strips, veneers and plastic panels.
Cet extrait de catalogue présente desventouses qui s'utilisent essentielle-ment pour la manutention de pan-neaux de bois, de lattes, de contre-plaqués et de plaqués en matièresythétique.
5/20
05
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.comFax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
1.0
FlachsaugerFlat suction cupsVentouses plates
Ø 20 mmØ 22 mmØ 28 mm
1.1
5/20
05
FIPA GMBH®
VAKUUM-TECHN IK
* Art. No. bei Bestellung mit angegebenem Material ergänzen.* When ordering add indicated material.* En cas de commande veuillez ajouter le matériel indiqué.
Andere Materialien auf Anfrage (siehe Materialliste INFO 4).Other materials on request (see materials list INFO 4).Autres matériaux sur demande (voir list des matériaux INFO 4)
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.com
2
2
270.135270.250
Art.No.
1/8" AG1/8" AG/M 5 IG
Art. No. 125.020.004._
Ø 22
8
*
Ø 14,5
Ø 5,5
NBR (sw),
Si (tr) 0,5 mm 0,8 gArt. No. 123.020.003._* NBR (sw),
Si (tr) 0,5 mm 3,5 g
Ø 9,5
Fax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
G 1/8”
G 1/8”
M 5
M 5
Ø 22
16
Ø 14
Ø 6
Ø 20
Ø 3
15
102.020.083.2102.020.080.1102.020.082.1102.020.084.2
Si (tr)
NBR (sw)
NBR (sw)
Si (r)
30° Shore40° Shore60° Shore60° Shore
2,0 g
Art. No.
270.005270.085270.086270.037270.373270.374
Art.No.M 5 IG1/8" AG1/8" IGM 5 AGM 6 AGM 8 AG
1,0 mm
Art. No. 125.025.007._
Ø 14,5
Ø 9,5
Ø 5
Ø 28
9
5
*
270.094270.096270.135270.250
Art.No.M 5 AG1/8" IG1/8" AG1/8" AG/ M 5 IG
NBR (sw),
Si (tr) 1,0 mm 1,6 gArt. No. 123.025.010._* NBR (sw),
Si (tr) 1,0 mm 4,5 g
17
Ø 28
ErsatzsaugerSpare cup
Ventouse de rechange
ErsatzsaugerSpare cup
Ventouse de rechange
22
270.033270.035270.104270.134
1/8" AG1/8" IGM 6 AGM 5 AG
Art. No. 112.020.032._
Ø 8
Ø 4
Ø 20
10 13
Art.No.
NBR (sw),Si (tr), NR (sw),NR-E (b) 3,0 mm 0,9 g
*
FlachsaugerFlat suction cupsVentouses plates
Ø 32 mmØ 42 mm
1.2
5/20
05
FIPA GMBH®
VAKUUM-TECHN IK
* Art. No. bei Bestellung mit angegebenem Material ergänzen.* When ordering add indicated material.* En cas de commande veuillez ajouter le matériel indiqué.
Andere Materialien auf Anfrage (siehe Materialliste INFO 4).Other materials on request (see materials list INFO 4).Autres matériaux sur demande (voir list des matériaux INFO 4)
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.comFax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
Ø 9,5
2
2270.250270.094270.135
1/8" AG/M 5 IGM 5 AG1/8" AG
Art.No.
Art. No. 125.030.010._
Ø 14,5
Ø 5
Ø 32
5,5
10
* NBR (sw),Si (tr)
2,5 mm 1,8 g
Ersatzsauger für:Spare cup for:Ventouse de rechange pour:
123.030.019124.030.002
FKM auf AnfrageFKM on requestFKM sur demande
Art. No. 123.030.019._
G
18
* NBR (sw),
Si (tr) 2,5 mm
2,5 mm
5,0 g
Art. No. 124.030.002._
G 1/8"
M 5
*5,2 g
NBR (sw),
Si (tr)
Ø 32
Ø 32
Ø 12,5
270.136270.251270.274270.275270.295
1/8" IG1/8" IG1/4" AG1/4" IG3/8" AG
Art.No.
NBR (sw),Si (tr),CR (sw)
NBR (sw),Si (tr),CR (sw)
Art. No. 125.040.013._
Ø 20
Ø 6,5
Ø 42
13
7
* 2,0 mm 6,4 g
Art. No. 123.040.028._*
G 1/8"
21mit Siebwith filter
avec crible
2,0 mm 11 g
Art. No. 124.040.006._*
G 1/8"
mit Tastventilwith plunger valve
avec palpeur
mit Tastventilwith plunger valve
avec palpeur
NBR (sw),Si (tr) 2,0 mm 12 g
23
Ersatzsauger für:Spare cup for:Ventouse de rechange pour:
123.040.028124.040.006
2,5
2,5
Ersa
tzsa
uger
Spar
ecu
pVe
ntou
sede
rech
ange
Ersa
tzsa
uger
Spar
ecu
pVe
ntou
sede
rech
ange
Ersa
tzsa
uger
Spar
ecu
pVe
ntou
sede
rech
ange
Ersa
tzsa
uger
Spar
ecu
pVe
ntou
sede
rech
ange
Ø 42
Ø 42
FlachsaugerFlat suction cupsVentouses plates
Ø 40 mm -Ø 53 mm
1.3
5/20
05
FIPA GMBH®
VAKUUM-TECHN IK
* Art. No. bei Bestellung mit angegebenem Material ergänzen.* When ordering add indicated material.* En cas de commande veuillez ajouter le matériel indiqué.
Andere Materialien auf Anfrage (siehe Materialliste INFO 4).Other materials on request (see materials list INFO 4).Autres matériaux sur demande (voir list des matériaux INFO 4)
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.comFax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
Art. No. 125.050.017._
Ø 27
Ø 12,5
Ø 18,5
Ø 11
Ø 14
Ø 53
9,5
3,5
17,5
*
270.012270.137270.252270.293270.296270.255+270.098= 1/4" IG270.255+270.097= 1/8" IG
Art.No.1/8" AG1/8" IG1/8" IG1/8" IG3/8" IG
NBR (sw),Si (tr) 2,5 mm 11,4 g
Art. No. 124.050.009._
Art. No. 123.050.034._
Art. No. 154.049.068.1*
*
28
G 1/8"
G 1/8"
26
NBR (sw),Si (tr)
NBR (gr)NBR (sw),Si (tr)
2,5 mm
3,5 mm2,5 mm
24,0 g
7,0 g26,0 g
mit Siebwith filter
avec crible
mit Tastventilwith plunger valve
avec palpeur
Ersatzsauger für:Spare cup for:Ventouse de rechange pour:
123.050.034
124.050.009
4
Ersa
tzsa
uger
Spar
ecu
pVe
ntou
sede
rech
ange
Ersa
tzsa
uger
Spar
ecu
pVe
ntou
sede
rech
ange
Ø 53
Ø 53
270.234
270.234
Art.No.
Art.No.
1/8" IG
1/8" IG
Art. No. 102.040.357._* Si (tr)NR-E (b) 3,0 mm 20 g
Ø26Ø 20Ø 17
Ø 8,5
Ø 40
12,56
33,
4
für genarbte Oberflächenfor grained surfaces
pour surfaces grainées
Ø 25
Ø 10
Ø 49
13,5
16,311
,310
6,7
Ø 49
Ø 39,5
Ø 29
Ø 47
NR (sw)2,0 mm
270.128
Art.No.
11 g
1/8" IG
Art. No. 154.047.059.3
FlachsaugerFlat suction cupsVentouses plates
Ø 70 mm -Ø 80 mm
1.4
3/20
05
FIPA GMBH®
VAKUUM-TECHN IK
* Art. No. bei Bestellung mit angegebenem Material ergänzen.* When ordering add indicated material.* En cas de commande veuillez ajouter le matériel indiqué.
Andere Materialien auf Anfrage (siehe Materialliste INFO 4).Other materials on request (see materials list INFO 4).Autres matériaux sur demande (voir list des matériaux INFO 4)
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.comFax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
270.391
270.390 270.379
Art.No.
Art.No. Art.No.
Art. No. 154.070.062.1 NBR (grau)1,5 mm 27 g
Ø 62Ø 55Ø 52
Ø 9
Ø 70Ø 56
16,5
3
1,5
7,5
Art. No. 102.070.296.3 NR (r)10 mm 50,0 g
Ø 10,5
Ø 42
Ø 17
Ø 70
Ø 39
3
1314
25
R 2
Ø 30
StahlSteelAcier
Art. No. 103.075.025.5 PUR (b)3,5 mm 60 g
Ø 60
Ø 19G 1/4”
Ø 7
Ø 9Ø 58Ø 75
51,
5
11
10
30
Alu
SW 6
abdruckfreianti-markinganti-trace
Art. No. 107.080.087._ Art. No. 154.080.067.3NBR (gr)NR (r)PUR (tr)
NR (sw)30,0 g 30,0 g
Ø 18
Ø 80
Ø 60
17
*
Handling von HolzpanelenHandling of wooden panels
passend für bereits installierte Standardaufnahmensuited for pre-installed standard
fittings
convient à des installationsstandard deja existantes
1/4" AG 1/4" IG
1,5 mm
Ø 79,5
Ø 75,5
Ø 71,5
Ø 61
Ø 79
16,310 6,
7
13,5
1/4" IG
Pour la maniement des lambris du bois
FlachsaugerFlat suction cupsVentouses plates
Ø 80 mm -Ø 98 mm
1.5
3/20
05
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.comFax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
Art. No. 104.080.091_*NBR (gr),NR-E (b)SBR (rb) 43 g4,0 mm
Ø 24
Ø 9,7
Ø 5
Ø 60
Ø 80
39
32 29
43
Art. No. 112.087.089.3
Ø 25
Ø 14
Ø 12
Ø 87
Ø 26
40
270.049
Art.No.
1/4" AG
NR (sw)NR (w) 10,0 mm 40,0 g
2
Art. No. 104.098.029.4
11
4
25
Ø 98
Ø 45
Ø 35
Ø 18
NR-E (bg)2,0 mm 48,0 g
Art. No. 102.095.182.4
Ø 64
Ø 20
Ø 45
Ø 93
24
17
11
A
"A"
NR-E (bg)2,5 mm 84,0 g
Art.No. 270.100
G 1/4"
Ø 34
32,5
1,5
Ø 35
44,
59
19,5
Ø 18
Ø 25
2 x Ø 3
Ø 5
Anschlussteil
RaccordFitting
* Art. No. bei Bestellung mit angegebenem Material ergänzen.* When ordering add indicated material.* En cas de commande veuillez ajouter le matériel indiqué.
Andere Materialien auf Anfrage (siehe Materialliste INFO 4).Other materials on request (see materials list INFO 4).Autres matériaux sur demande (voir list des matériaux INFO 4)
Art. No. 104.098.079.3 NR (b)200 g8,0 mm
G 3/8"
Ø 60Ø 74Ø 85Ø 98
15
43
MessingBrass
Laiton
Aufnehmen von Werkstücken mitunterschiedlichen Größen
picking up workpieces of
different sizesprise de pièces de taillesdifférentes
FlachsaugerFlat suction cupsVentouses plates
Ø 98 mm -Ø 110 mm
1.6
5/20
05
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.comFax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
Art. No. 104.098.021_*NBR (gr),NR (bg) 84 g9,0 mm
* Art. No. bei Bestellung mit angegebenem Material ergänzen.* When ordering add indicated material.* En cas de commande veuillez ajouter le matériel indiqué.
Andere Materialien auf Anfrage (siehe Materialliste INFO 4).Other materials on request (see materials list INFO 4).Autres matériaux sur demande (voir list des matériaux INFO 4)
Ø 31
Ø 29
Ø 15,5
Ø 6
Ø 98
32
19
2
41
Art. No. 154.100.012._
Art. No. 152.100.042._
G 1/4"
42
136
SW 19
NBR (sw),Si (tr)NR-E (b) 2,0 mm 192,0 g
Art. No. 102.100.100.4
Ø 38
Ø 19
Ø 100
55
NR-E (b)0,5 mm 92,0 g
ErsatzsaugerSpare cupVentouse de rechange
*
*
23
Ø 100
270.144
Art. No. 152.110.070.13 SBR (sw)5,0 mm 279 g
Ø 80
Ø 110
15,510
,5 5
StahlSteel
AcierØ 9
für vibrationsarmes Haltenfor low-vibration holding
pour un maintient avec peu de viobrations
Ø 80
Ø 110
20
11,5 6
Art. No. 104.110.080.3 NR (b)9,0 mm 270 g
Stahl, vulkanisiertSteel, vulcvanizedAcier, vulcanisé
SchrägeSlopeBiais
Aufnehmen und Bearbeitenvon gewölbten Teilen(z.B. Stuhllehnen)
picking up and working
curved parts
(e.g. chair backs)
prise et usinage de pièces bombées (par ex. dossier de chaises)
FlachsaugerFlat suction cupsVentouses plates
Ø 112 mm -
Ø 160 mm
NBR (bg)
NBR (bg)NBR (sw) 11 mm 120 g
Art. No.
Ø 62
G
G
Ø 4,5
165
45
216 15
Ø 12
Ø 112
Ø 22
G 1/4"
M 14 x 1,5
Ø 104,5
Ø 94,5
Ø 84,5
Ø 26
Ø 100
Ø 135
27 24,5
5
Art. No. 102.135.335.3 NR (gr)2,5 mm 113 g
270.290
Art.No.
½" IG / Delrin
Ø 40
Ø 31
Ø 27
Ø 142
31
8
5
70
2
Art. No. 104.142.077.1 NBR (bg)0,0 mm 152 g
270.330
Art.No.
1" IG
- für glatte Flächen: sehr abdruckarm, kein Hub- für Teppichoberflächen (nur mit Vakuumerzeugung durch Seitenkanalverdichter)
50° Shore50° Shore40° Shore
150.112.021.1
150.112.022.1
1.7
3/20
05
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.comFax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
* Art. No. bei Bestellung mit angegebenem Material ergänzen.* When ordering add indicated material.* En cas de commande veuillez ajouter le matériel indiqué.
Andere Materialien auf Anfrage (siehe Materialliste INFO 4).Other materials on request (see materials list INFO 4).Autres matériaux sur demande (voir list des matériaux INFO 4)
Art. No. 154.160.049._
Ø 146
Ø 141
Ø 137
Ø 160
21,2 9
3
4,5
4,7 mm
NBR (gr +sw),Si (tr),PUR (ge) 148 g
*
270.217
Art.No.
1/4" IG
- for smooth surfaces:
non-marking, no stroke
- for carpet surfaces (only
if vacuum ist generated by
lateral channel blowers)
- pour surfaces lisses:laissant très peu traces, san course- pour faces supérieures de tapis
FlachsaugerFlat suction cupsVentouses plates
Ø 177 mm -
Ø 350 mm
1.8
Art. No. 154.177.053._Si (tr),
CR 0,0 mm 260 g
Ø 137
Ø 108,5
Ø 64,5
Ø 176,5
23,5
*
270.218
Art.No.
1/4" IG
102.200.350._*102.350.353.4
NBR (gr) 50° ShoreSi (tr) 40° ShoreNR-E (rb) 30° Shore 5,0 mm
200 g
770 g
Ø D1
Ø D2
Ø D3
Ø D4Ø D
H5H4 H1 H2
H3
H
270.335 =1/2" IG
270.337 =1/2" IG
NR-E (rb)
200 170 160 148 25 32 28 25 7 13 5
350 304 292 282 25 38 27 25 13 12 6
Art.No. D D1 D2 D3 D4 H H1 H2 H3 H4 H5
3/20
05
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.comFax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
* Art. No. bei Bestellung mit angegebenem Material ergänzen.* When ordering add indicated material.* En cas de commande veuillez ajouter le matériel indiqué.
Andere Materialien auf Anfrage (siehe Materialliste INFO 4).Other materials on request (see materials list INFO 4).Autres matériaux sur demande (voir list des matériaux INFO 4)
Art. No. 152.288.049._
Ø 2373
Ø 35Ø 20M 6
6,5
9,5
30
Ø 288
Gummirubber
chaoutchouc
* NBR (sw),
Si (r) 2580 g12 mm
Ohne Bohrungen/without holes/sans forage:Art. No. 152.288.091.3 = NR (r), 50° Sh (40° Sh auf Anfrage/on request/sur demande)
90
210
R70
112,50112,5
0
8x
M6
Art. No.
30° Shore
Art. No. 102.060.303._
Ø 38,5
Ø 17
G 1/4"
5
2
16
Ø 60
* NBR (sw),Si (tr),PUR (or) 15,2 g
Art. No. 102.080.304._
Ø 53
Ø 17
G 1/4”
6
2
18
Ø 80
* NBR, (sw)Si (tr),PUR (or) 6,0 mm5,0 mm 52,8 g
SW 17
SW 30
SW 30
SW 20
4032
Ø 6
M 20 x 2,5
30
G 1/4"
H
L
C = Hub Travel Course
50.105 28 130 1750.106 65 167 5050.107 95 197 74
Art. No. H L C
C
Anschlussteil
RaccordFitting
Federstößel / /Porteurs pour ventouses
Supports for suction cups
Art. - No. 270.191
G 1/4"
G 1/4"
Ø 5,5
88
5 21
SW 17
SW 17G 1/4”
G 1/4”
95
9
23
G 1/4”
G 1/4”
105
10
25
63.03663.037 Art. No. 63.013
Ø D
Strömungsventile /Soupapes hydrauliques
Flow valves /
mit Strömungsstiftwith flow pinavec broche de flux
mit Selbstreinigungseffektwith self-cleaning effectavec effet autonettoyant
Art. No. 63.032
G 1/4”
SW 17
16,8
45
1012
,22
2,3
6,5
12
G 1/4”
7,2
C = Hub Travel
Course KunststoffSynthetic material
Matière plastique
C=10
mm
Tastventil
PalpeurPlunger valve
SW 17
SW 27
SW 27
SW 19
CH40
29
Ø 6
M 18 x 1,5
1010
L
G 1/4"
50.015 25 37 126
50.016 55 77 166
50.017 80 110 199
Art. No. C H L
Ø D
0,8 mm1,2 mm
60 mm80 mm
Sauger-Øcup diam.Ø ventouse
Art. No.
1 1
2
34
5 6
7
1 1 1 1
2
2
5 6 7
444
3ohnewithoutsans
FlachsaugerFlat suction cupsVentouses plates
Familie
Ø 60 mm -
Ø 80 mm
1.9
3/20
05
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.comFax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
G 1/4" G 1/4"
Art. No. 102.070.234._
Ø 50
Ø 42,5
Ø 32,5
Ø 70
30
18
4
Ø 14
Ø 13
Si (tr), NR (bg),NR-E (b)SBR (rb) 6,0 mm 32,0 g
*
G 1/4”
Ø 32
14,320
Ø 42Art.No. 270.179
Anschlussteile
RaccordsFittings
Art. - No. 270.191
G 1/4"
G 1/4"
Ø 5,5
88
5 21
SW 17
SW 17
SW 30
SW 30
SW 20
4032
Ø 6
M 20 x 2,5
30
G 1/4"
H
L
C = Hub Travel Course
50.105 28 130 1750.106 65 167 5050.107 95 197 74
Art. No. H L C
C
Federstößel / /Porteurs pour ventouses
Supports for suction cups
SW 17
SW 27
SW 27
SW 19
CH40
29
Ø 6
M 18 x 1,5
1010
L
G 1/4"
50.015 25 37 126
50.016 55 77 166
50.017 80 110 199
Art. No. C H L
AluminiumAluminumAluminium
4
1
22
2 2
3 6 7
1 1 1
FlachsaugerFlat suction cupsVentouses plates
Familie
Ø 70 mm
1.10
5/20
05
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.comFax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
SW 17G 1/4”
G 1/4”
95
9
23
G 1/4”
G 1/4”
105
10
25
Ø D
Strömungsventile /Soupapes hydrauliques
Flow valves /
mit Strömungsstiftwith flow pinavec broche de flux
mit Selbstreinigungseffektwith self-cleaning effectavec effet autonettoyant
5 5
63.03663.037 Art. No. 63.013
Ø D
0,8 mm1,2 mm
60 mm80 mm
Sauger-Øcup diam.Ø ventouse
Art. No.
76
4 51
2
3
verstärkte Ausführung:reinforced version:
102.070.389.1 NBR (gr)
G 1/4" G 1/4"
1 1 1 1
2
2
5 6 7
3 444ohnewithoutsans
Art. - No. 270.191
G 1/4"
Ø 5,5
88
5 21
SW 17
SW 17G 1/4”
G 1/4”
95
9
23
G 1/4”
G 1/4”
105
10
25
Art. No. 63.038 Art. No. 63.013
Ø 1,5
Strömungsventile /Soupapes hydrauliques
Flow valves /
mit Strömungsstiftwith flow pinavec broche de flux
mit Selbstreinigungseffektwith self-cleaning effectavec effet autonettoyant
Art. No. 63.032
G 1/4”
SW 17
16,8
45
1012
,22
2,3
6,5
12
G 1/4”
7,2
C = Hub Travel
Course KunststoffSynthetic material
Matière plastique
C=10
mm
Tastventil
PalpeurPlunger valve
Art. No. 102.095.305._
Ø 68
Ø 17
G 1/4”
6
2
19
Ø 95
* NBR (sw),Si (tr),PUR (or) 92,0 g
SW 17
SW 30
SW 30
SW 20
4032
Ø 6
M 20 x 2,5
30
G 1/4"
H
L
C = Hub Travel Course
50.105 28 130 1750.106 65 167 5050.107 95 197 74
Art. No. H L C
C
Federstößel /Porteurs pour ventouses
Supports for suction cups /
SW 17
SW 27
SW 27
SW 19
CH40
29
Ø 6
M 18 x 1,5
1010
L
G 1/4"
50.015 25 37 126
50.016 55 77 166
50.017 80 110 199
Art. No. C H L
1
34
2
5 6
7
6,0 mm
Anschlussteil
RaccordFitting G 1/4"
FlachsaugerFlat suction cupsVentouses plates
Familie
Ø 95 mm
1.11
3/20
05
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.comFax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
G 1/4" G 1/4"
Art. No. 102.100.269._
Ø 70
Ø 60,5
Ø 50,5
Ø 26
Ø 22
32
195
NBR (gr), Si (tr),NR-E (br),SBR (rb) 5,0 mm 68 g
SW 17G 1/4”
G 1/4”
95
9
23
G 1/4”
G 1/4”
105
10
25
Art. No. 63.037 Art. No. 63.013
Ø 1,2
Strömungsventile /Soupapes hydrauliques
Flow valves /
mit Strömungsstiftwith flow pinavec broche de flux
mit Selbstreinigungseffektwith self-cleaning effectavec effet autonettoyant
Anschlussteile
RaccordsFittings
Art. - No. 270.191
G 1/4"
G 1/4"
Ø 5,5
88
5 21
SW 17
G 1/4”
1420
Art.No. 270.180
Ø 50
Ø 60
*
1
2
3
6 7
SW 17
SW 30
SW 30
SW 20
4032
Ø 6
M 20 x 2,5
30
G 1/4"
H
L
C = Hub Travel Course
50.105 28 130 1750.106 65 167 5050.107 95 197 74
Art. No. H L C
C
Federstößel / /Porteurs pour ventouses
Supports for suction cups
SW 17
SW 27
SW 27
SW 19
CH40
29
Ø 6
M 18 x 1,5
1010
L
G 1/4"
50.015 25 37 126
50.016 55 77 166
50.017 80 110 199
Art. No. C H L
4 5
AluminiumAluminumAluminium
1
4
22
2 2
3 6 7
1 1 1
5 5
FlachsaugerFlat suction cupsVentouses plates
Familie
Ø 100 mm
1.12
5/20
05
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.comFax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
G 1/4" G 1/4"
Ø 100
FlachsaugerFlat suction cupsVentouses plates
D D1 D2 D3 H Material / Material / Matière
154.065.002._154.085.008._154.090.010._154.110.014._154.120.017._154.150.021._154.160.024._
Art. No.
65 85 90110120150160
50 68 67 96 97133135
40 59 59 88 88120120
18344054546464
16171617162323
1,51,51,51,51,53,03,0
22 32 34 45 52108149
NBR (sw), Si (tr), NR (sw), Vinyl (bl), NR-E (b)
NBR (sw), NBR (gr), Si (w), (NR (sw), FKM (g)
NBR (sw), NBR (gr), Si (w), (NR (sw), FKM (g)NBR (sw), Si (tr), NR (sw), Vinyl (bl)
Si (tr), NR (sw), Vinyl (bl)NBR (sw), NBR (gr), Si (w), NR (sw), FKM (gr)
NBR (sw), Si (tr), NR (sw), PUR (tr), Vinyl (bl)
Ø
Ø Ø d1 Ø d2 h h1
Ø Ø d1 Ø d2 h h1
Ø Ø d1 Ø d2 h h1Art. - No.
Art. - No.
Art. - No.
Art. - No.
Ø d2
Ø
Ø d1
h1
h
Anschlussteile
Raccords
Fittings
für Sauger / for suction cup / pour ventouseArt. No. 154.065.002
Art. No. 154.110.014 + 154.120.017
Art. No. 154.150.021 + 154.160.024
Art. No. 154.065.003 +154.085.008 +154.090.010
4463
92127
4159
88120
1011
1115
33
34
für Sauger / for suction cups / pour ventouses
für Sauger / for suction cups / pour ventouses
für Sauger / for suction cups / pour ventouses
*******
Ø D2
Ø D3
Ø D
H
Ø D1
AluminiumAluminum
Aluminium
270.129.O
270.129.U
Art. No. 270.129
3,5
A
"A"
G 1/8"
Ø 6,5
10
2217
1,5 27
Ø 5
Ø 8Ø 12
SW 14
OberteilUpper partPartie supérieur
UnterteilBasePartie inférieur
(komplett/complete/complet)
O-Ring
Art. No. 270.130
270.130.U
Ø 8Ø 12
1,5
3532
15
43
G 1/2"
Ø 12,5
Ø 25
9
A
"A" SW 30
OberteilUpper partPartie supérieur
UnterteilBasePartie inférieur
(komplett/complete/complet)
O-Ring
TastventilPlunger valvesPalpeurs
TastventilPlunger valvesPalpeurs
TastventilPlunger valvesPalpeurs
TastventilPlunger valvesPalpeurs
270.149270.150270.151270.259270.261270.262270.284
M 8 M 10 x 1,25 M 12 Ø 6 M 6 G 1/8" G 1/4"
270.129
270.130
270.130
270.130
270.163270.164270.165270.166270.167270.168270.224270.265270.266270.271
M 8 G 1/8" M 10 x 1,25 M 16 G 3/8" M 17 x 1 G 1/4" Ø 6 G 1/2" M 12
270.169270.170270.171270.172270.173270.174270.267270.268270.272 M 12
G 1/8"M 10 x 1,25G 1/4"M 16G 3/8"M 17 x 1Ø 6G 1/2"
Serie mit Zubehör
Serie with accessories
Serie avec accessoires
270.130.OTastventile / /Palpeurs
Plunger valves
270.129
270.156270.157270.158270.159270.160270.161270.162270.263270.264270.285270.286
M 6 M 8 G 1/8" M 10 x 1,25 M 16 G 3/8" M 17 x 1 M 12 G 1/4" Ø 6 G 1/2"
1.13
3/20
05
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.comFax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
7 mm
7 mm
8 mm
8 mm
10 mm
11 mm
Ø D1
A
Ø D
H
h2
h3
h1
G M
152.110.081._*152.150.020._*152.200.026._*152.250.030._*152.300.036._*152.350.110._*
Ø D2
NBR (sw),
Si (tr),
NR (sw)
330 g
847 g
1760 g
3000 g
4580 g
6600 g
110
150
200
250
300
350
74
115
164
214
266
316
68
105
148
196
248
298
26
26
28
28
31
31
10
10
10
10
10
10
G 1/4"
G 3/8"
G 3/8"
G 3/8"
G 1/2"
G 1/2"
M 12
M 12
M 12
M 12
M 16
M 16
3
3
3
3
3
3
26,0
40,0
47,5
72,5
89,0
89,0
7
7
8
8
10
10
StahlSteel
Acier
Art. No. Ø D Ø D1 Ø D2 H h1 h2 h3 A G MMaterial/Material/Matériel
1.14
3/20
05
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.comFax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
FlachsaugerFlat suction cupsVentouses plates
SerienSeriesSeries
* Art. No. bei Bestellung mit angegebenem Material ergänzen.* When ordering add indicated material.* En cas de commande veuillez ajouter le matériel indiqué.
Andere Materialien auf Anfrage (siehe Materialliste INFO 4).Other materials on request (see materials list INFO 4).Autres matériaux sur demande (voir list des matériaux INFO 4)
Ø L
E
Ø B
Ø A
M
N
C
D
F (SW)
A
"A"
G HJ
K
Alu,vulkanisiertvulcanizedvulcanisée
150.030.031,_
150.050.032._
150.075.033._
150.100.034._
150.150.010._
150.225.018._
150.300.023._
30
50
75
100
150
225
300
18
33
50
68
100
150
200
10
11
14
20
26
34
44
17
18
22
30
42
54
70
8
14
17
24
27
41
46
10
18
22
30
35
50
56
3,5
14
38
83
284
840
1840
3,5
5,5
7,0
8,5
12,0
14,0
19,0
2,5
4,5
5,5
7,0
9,0
11,0
15,0
2,5
4,0
5,5
9,0
10,0
8,0
17,0
M 5
G 1/8”
G 1/4”
---
G 1/2”
G 3/4”
G 1”
--
--
--
--
--
--
70
--
--
--
--
30
50
60
--
--
--
--
--
--
G 1/2”
--
--
--
--
G 1/8”
G 1/8”
G 1/8”
mm gArt. No. A B C D E F G H J K L M N
150.030.031,_
150.050.032._
150.075.033._
150.100.034._
150.150.010._
150.225.018._
150.300.023._
Si (r), PUR (bg), CR (sw)Si (r), PUR (sw), CR (sw)Si (r), CR (sw), FKM (sw)NBR (sw), NR (w), Si (tr)Si (r), CR (sw)Si (r), CR (sw)Si (r), CR (sw)
Art. No. Material
100.076.073._
100.090.075._100.076.083._
100.090.084._100.110.082._100.110.085._100.150.086._
G
h1h2
ØØ D
H
SW 6
NBR(sw),
1,5 mm
1,5 mm
1,5 mm
1,5 mm
2,0 mm
2,0 mm
2,0 mm
82 g
98 g
100 g
172 g
175 g
G 1/4"
G 3/8"
G 1/4"
G 3/8"
G 1/4"
G 3/8"
G 3/8"
76
76
90
90
110
110
150
38
38
38
38
38
38
50
24
24
24
24
24
24
36
14
14
14
14
14
14
14
Art. No. Ø D G H h1 h2
352 g
80 g
NR(sw)
Si(tr),
Art. No. 154.065.003._*
*******
*
*
*
*
NBR (sw),Si (tr), NR (sw),FKM (g) +300°C 3,0 mm 21,0 g
18Ø 67
Ø 60
Ø 27
Ø 65
A
"A"
Ø
ØØ 63
3
11
Anschlussteile
RaccordsFittings
Art. No.
FlachsaugerFlat suction cupsVentouses plates
AluminiumAluminumAluminium
102.076.188._
102.090.189._
102.110.190._
102.150.191._
ErsatzsaugerSpare cupVent. de rechange
TastventilPlunger valvesPalpeurs
270.156270.157270.158270.159270.160270.161270.162270.263270.264270.285270.286
M 6 IGM 8 IG1/8 IGM10x1,25 IGM 16 IG3/8" IGM17x1 IGM 12 IG1/4" IGØ 61/2" IG
270.129
Serien
Series
Series
Ø 59
Ø 35
d
Ø 75
37
d
G 1/4"
M 12
Ø 11,5
Art. No.120.075.075.4120.075.074.4122.075.063.4
Art. No.102.020.410.5102.030.411.5102.040.412.5102.050.413.5
NR-E (b)
NR-E (b)
NR-E (b)
3,0 mm
3,0 mm
3,0 mm
35,0 g
34,5 g
29,0 g
1.15
5/20
05
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.comFax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
* Art. No. bei Bestellung mit angegebenem Material ergänzen.* When ordering add indicated material.* En cas de commande veuillez ajouter le matériel indiqué.
Andere Materialien auf Anfrage (siehe Materialliste INFO 4).Other materials on request (see materials list INFO 4).Autres matériaux sur demande (voir list des matériaux INFO 4)
9
A
B
C
A
B
B
C
20
30
40
50
13,0
13,0
23,5
25,0
4,5
6,0
6,0
8,0
11
11
11
20
10
12
14
15
6
7
7
7
1,5
2,1
4,0
4,0
D
D1
D2
D3
H
H1
H2
D D1 D2 D3 H H1 H2
für glatte Oberflächenfor smooth surfacespour surfaces lisses
PU
R(b
)
72°
Sho
re
Art. No. 102.020.410.5270.319 1/8” IG270.087 1/8” AG270.311 M 5 AG
Art. No. 102.030.411.5270.275 1/4” IG270.274 1/4” AG270.312 M 6 AG270.030 1/8” AG270.019 1/8” IG
Art. No. 102.040.412.5270.275 1/4” IG270.274 1/4” AG270.312 M 6 AG270.030 1/8” AG270.019 1/8” IG
Art. No. 102.050.413.5270.034 1/4” AG270.314+308 =1/4” IG270.313 M 8 AG
für / for / pour Art.No.
1,5 g
2,0 g
6,0 g
9,0 g
1,5 mm
2,1 mm
4,0 mm
4,0 mm
2.1
3/20
05
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.comFax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
* Art. No. bei Bestellung mit angegebenem Material ergänzen.* When ordering add indicated material.* En cas de commande veuillez ajouter le matériel indiqué.
Andere Materialien auf Anfrage (siehe Materialliste INFO 4).Other materials on request (see materials list INFO 4).Autres matériaux sur demande (voir list des matériaux INFO 4)
Ø d2
H
h1
h2
A
B
132.45x15.020._*132.60x20.022._*132.75x25.023._*132.85x28.024._*132.100x35.26._*
Ø d3
NBR (sw),
Si (tr),
Si (r)
PUR (bg)
3,0 mm
4,0 mm
4,0 mm
4,0 mm
4,0 mm
4 g
9 g
15 g
20 g
32 g
45
60
75
85
100
15
20
25
28
35
21
21
22
22
22
17
17
18
18
18
12
12
12
12
12
14
10
8
8
8
4,0
4,0
4,0
7,5
7,5
4,0
4,0
4,0
5,5
6,5
Ø d1
Art. No. A B H h1 h2 Ø d1 Ø d2 Ø d3
einvulkanisierteAluminiumverstärkungvulcanized aluminum
reinforcement
vulcanisé avec renforcement d'un tôle d'aluminium
132.85x28.024132.100x35.26
Art. No. 138.45x15.003._*
45
Ø 6
DrahtbügelStiffener (wire)
Fil de renforcement
Ø 17,5
Ø 12Ø 5
8 9,5
28,5
15
NBR (sw)
Si (r) 8,5 mm 7,0 gArt.No. 138.75x25.004._*
75
2534
,5
9,58
Ø 17,5
Ø 12
Ø 6
NBR (sw)
Si (bl) 10,5 mm
DrahtbügelStiffener (wire)
Fil de renforcement
Art.- No. 270.097
G 1/4"
Ø 6,51,
51,
5
2,5
2
1,5
98
8 25
Ø 13
SW 17
M 8
Art.- No. 270.098
G 1/4"
Ø 13
1,5
1,5
2,5
1,5
2 21
129
10
SW 17
M 8
A
"A"
Anschlussteile
RaccordsFittings
Oval-/RechtecksaugerOval/rectangular suction cupsVentouses ovales/rectangulaires
Serien mit ZubehörSeries with accessoriesSéries avec accessories
Ersatz:Spare part:Pièce de rechange:
X0019
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.com
Oval-/RechtecksaugerOval/rectangular suction cupsVentouses ovales/rectangulaires
50 x 20 mm -
60 x 38 mm
Art. No. 132.50x30.030.13
2.2
Ø 20
Ø 6
Ø 4
2
13
24
30
50
270.041270.043
Art.No.
1/8" IG1/4" AG
* Art. No. bei Bestellung mit angegebenem Material ergänzen.* When ordering add indicated material.* En cas de commande veuillez ajouter le matériel indiqué.
NBR (gr)SBR (rb) 5,0 mm 9,4 g
Andere Materialien auf Anfrage (siehe Materialliste INFO 4).Other materials on request (see materials list INFO 4).Autres matériaux sur demande (voir list des matériaux INFO 4)
5/20
05Fax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
Art. No. 9.50x20.034.1
10,5
M 5
11 11
40,5
50,5
M 4
3,5
9,5
20
NBR (gr)2,0 mm 20 g
Alu
Art. No. 130.60x38.091._* NBR (gr)
NR (w) 2,0 mm 40,0 g
R 10
18 18
Ø 17
Ø 3,5
G 3/8"Ø 5,5
60
8
6
14 125
5
35 38
52 Alu
Alu
5
M 5
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.com
Oval-/RechtecksaugerOval/rectangular suction cupsVentouses ovales/rectangulaires
50 x 20 mm -
100 x 32 mm
2.3
* Art. No. bei Bestellung mit angegebenem Material ergänzen.* When ordering add indicated material.* En cas de commande veuillez ajouter le matériel indiqué.
Andere Materialien auf Anfrage (siehe Materialliste INFO 4).Other materials on request (see materials list INFO 4).Autres matériaux sur demande (voir list des matériaux INFO 4)
5/20
05Fax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
Art. No. 130.100x32.42.1
126
G 1/4"
2
6
14
100
112
3032
Ø 5,3
NBR2,0 mm 73 g
(gr)
Alu
Art. No. 130.60x20.040.1
75
G 1/8"
1,4
6
12,5
60
65
20
Ø 4,5
NBR (gr)1,4 mm 27 g
AluminiumAluminum
Aluminium
AluminiumAluminum
Aluminium
Art. No. 130.50x20.102.1 NBR (gr)50° Shore 3,0 mm 18 g
2211
7 202 12,59 6
Ø 850
G 1/8"52
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.com
Oval-/RechtecksaugerOval/rectangular suction cupsVentouses ovales/rectangulaires
110 x 40 mm -
125 x 55 mm
2.4
* Art. No. bei Bestellung mit angegebenem Material ergänzen.* When ordering add indicated material.* En cas de commande veuillez ajouter le matériel indiqué.
Andere Materialien auf Anfrage (siehe Materialliste INFO 4).Other materials on request (see materials list INFO 4).Autres matériaux sur demande (voir list des matériaux INFO 4)
5/20
05Fax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
Art. No. 9.110x40.011._*
110
4020
Alu, vulkanisiertAlu, vulcanizedAlu, vulcanisée
NBR (sw),
NR-E (b) 9,0 mm 37 g
Art. No. 9.125x55.012._*
102
122
22 50
A
"A"
NBR (gr)NR-E (b)SBR (rb) 9,0 mm 192 g
Art. No. 9.120x30.062._*3,0 mm 110 g
120
11
8 6
3020
Stahl, vulkanisiertSteel, vulcanized
Acier, vulcanisée
Stahl, vulkanisiertSteel, vulcanized
Acier, vulcanisée
NBR (gr)
110
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.com
Oval-/RechtecksaugerOval/rectangular suction cupsVentouses ovales/rectangulaires
200 x 55 mm
2.5
* Art. No. bei Bestellung mit angegebenem Material ergänzen.* When ordering add indicated material.* En cas de commande veuillez ajouter le matériel indiqué.
Andere Materialien auf Anfrage (siehe Materialliste INFO 4).Other materials on request (see materials list INFO 4).Autres matériaux sur demande (voir list des matériaux INFO 4)
5/20
05Fax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
Art. No. 9.200x55.014.1
193
2155
13 8
NBR (gr)7,0 mm 335 g
Stah, vulkanisiertsteel, vulcanized
acier, vulcanisée
Art.No. 9.200x55.053.3R NR (r)
55° Shore 7,0 mm 150 g
Ø 8 2 x M 8
22
8 5
7
200
40 40 40
Alu
176
20
55
21
Alu, vulkanisiertAlu, vulcanizedAlu, vulcanisée
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.com
2.6
* Art. No. bei Bestellung mit angegebenem Material ergänzen.* When ordering add indicated material.* En cas de commande veuillez ajouter le matériel indiqué.
Andere Materialien auf Anfrage (siehe Materialliste INFO 4).Other materials on request (see materials list INFO 4).Autres matériaux sur demande (voir list des matériaux INFO 4)
3/20
05Fax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
Oval-/RechtecksaugerOval/rectangular suction cupsVentouses ovales/rectangulaires
Art. No. 9.135x75.066.13
Art. No. 9.123x43.076.13
SBR (sw)
SBR (sw)
200 g
80 g
12 mm
3 mm
135
27
7515
8
Stahl, vulkanisiert, Steel, vulcanized
Acier, vulcanisé
19 200
8015
8
40x
160
SBR (sw),
Stahl, vulkanisiertSteel, vulcanized
Acier, vulcanisée
Art.No. 9.200x80.067.13460 g4,0 mm
123 x 43 mm -
200 x 80 mm
91 x 31
für raue Oberflächen (z.B. sägeraues Holz)for rough surfaces (e.g. saw-cut wood)
pour surfaces rudes (par ex. bois r ugueux)
für raue Oberflächen (z.B. sägeraues Holz)for rough surfaces (e.g. saw-cut wood)
pour surfaces rudes (par ex. bois r ugueux)
für raue Oberflächen (z.B. sägeraues Holz)for rough surfaces (e.g. saw-cut wood)
pour surfaces rudes (par ex. bois r ugueux)
Alu, vulkanisiertAlu, vulcanized
Alu, vulkanisée
1343 32
10
123
111
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.com
2.7
3/20
05Fax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
Oval-/RechtecksaugerOval/rectangular suction cupsVentouses ovales/rectangulaires
190 x 90 mm -
200 x100 mm
Art. No. 9.200x20.063.1
Art. No. 9.190x90.077.3
NBR (gr)
NR ( r)
45° Shore
5,0 mm
5,5 mm
220 g
150 g
200
220
20
6
9
110
20
Stahl, vulkanisiertSteel, vulcanized
Acier, vulcanisée
164 x 64
190
19
90
13,6
Art. No. 9.200x100.015._
190
160
2190
13
8
* NBR (gr),SBR (sw,NR-E (b)
NBR (gr)
8,0 mm
8,0 mm
595 g
450 g
M*
M* StahlSteelAcier
Art. No. 9.200x100.054._* Alu
Alu
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.com
280 x 107 mm
300 x 55 mm
Oval-/RechtecksaugerOval/rectangular suction cupsVentouses ovales/rectangulaires
2.8
9/20
03Fax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
Art. No. 9.280x107.070.13 SBR (rb)6,0 mm 1100 g
70 107
Besonderheit: zusätzliche DichtlippeSpecial feature: additional sealing lip Particularité: lèvre d’etancheité supplementaire
MStahl/steel/acierAlu/alu/alu
270
295
22
814
55
*
*
M
NBR (gr)
NR-E (b),
SBR (rb) 8,0 mm
550 g
300 g
Art.No. 9.300x55.045.3
295
5522
6
Alu
NR (r)
55° Shore 9 mm 218 g
100
80
Ø 9 2 x M 8Ø 21 13
Art. No.9.300x55.019._9.300x55.020._
270
90 90
21 15
8
245
280
Stahl, vulkanisiertSteel, vulcanized
Acier, vulcanisée
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.com
2.9
3/20
05Fax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
Oval-/RechtecksaugerOval/rectangular suction cupsVentouses ovales/rectangulaires
290 x 55 mm
300 x 30 mm
300 x 40 mm
Art.No. 9.300x30.069.1 NBR (gr)5,0 mm 500 g
320
300
160 130
302015
Ø 5
Stahl vulkanisiertSteel vulcanizedAcier vulcanisée
6
Art.No. 9.300x40.064.1 NBR (gr)7,0 mm 500 g
Stahl vulkanisiertSteel vulcanizedAcier vulcanisée
320
300
4030
160
2215
6
Ø 8
Art. No. 9.290x55.071.1 NBR (gr)7,0 mm 100 g
13
8
20
Art.No. 270.332 (Alu)
290
55
268
252
24 35
A
"A"
B
"B"
ohne Anschlussteil / without fitting / sans raccord
Sauglippe aufstülpbarreversible suction lip
Lèvre accrochableAnschlussteilFittingRaccord
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.com
Oval-/RechtecksaugerOval/rectangular suction cupsVentouses ovales/rectangulaires
300 x 80 mm
300 x 120 mm
Art. No. 9.300x120.021._*
2.10
10
36
250
300
250
74 120
* Art. No. bei Bestellung mit angegebenem Material ergänzen.* When ordering add indicated material.* En cas de commande veuillez ajouter le matériel indiqué.
NBR (gr), Si (tr)
SBR (sw), SBR (rb)
EPDM (gr)
NR (r)17 mm
1260 g
570 g
Andere Materialien auf Anfrage (siehe Materialliste INFO 4).Other materials on request (see materials list INFO 4).Autres matériaux sur demande (voir list des matériaux INFO 4)
Stahl/steel/acier
Alu/alu/alu
M
M
9.300x120.042.3
3/20
05Fax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
Art. No. 155.300x80.007._ NBR (sw)
NR (sw)
290
284
300
11
100 100
0,5
17,57,5
62 70 80
M 12 M 12G 3/8”
*1,5 mm 500 g
ErsatzsaugerSpare cup
Ventouse de rechange
Art. No.
216.300x80.004._*NBR (sw),
NR (sw)
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.com
2.11
5/20
05Fax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
Oval-/RechtecksaugerOval/rectangular suction cupsVentouses ovales/rectangulaires
400 x 80 mm
Art.No. 130.400x80.106.4NR (sw)
35° Shore 3,5 mm 1280 g
Ø 14 (5 x) M 6 (12 x)
60 6060 60
60 70 70 60
80 40
400
25
102
für glatte und leicht strukturierte Ober flächen
Tragfähigkeit bei 60 % Vakuum: Temperaturbeständigkeit: - 40° C bis +80° CKurze Spitzentemperatur: +100° C
Stahlträger einvulkanisiertsteel carrier, vulcanized
porteur (acier) vulcanisée
for smooth and lightly
textured surfaces
Lifting capacity at 60 % vacuum:
Resistance to temperture: - 40° C to +80° C
Brief peak temperature: +100° C
pour surfaces lisses etlégerement structurées
Force de levage à 60 % de vide:
80 kg waagrecht/horizontally/ horizontalement40 kg senkrecht/vertically/ verticalement
Rèsistanze à temperature: Temperature de ponte sur courtes durées: +100° C
-40° C bis +80° C
Art. No. 9.450x130.025._*
130
20
450
15 8
410 x 100
StahlSteel
Acier
NBR (gr)
SBR (rb) 6,0 mm 2400 g
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.com
2.12
3/20
05Fax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
155.75x40.001._155.120x90.2._155.150x75.3._
216.75x40.001._216.120x90.2._216.150x75.3._
* ***
**
B1
B2
B
Hh1A2 A1 A
NBR (sw),Si (tr),NR (sw)
1,5 mm
1,5 mm
1,5 mm
16 g
40 g
50 g
76
120
150
41
90
75
66
112
140
55
102
130
31
80
65
20
70
55
16,5
18,0
17,0
11
11
11
Art. No. A B A1 A2 B1 B2 H h1
9.150x55.013.49.250x55.016._9.300x55.019._9.300x55.020._9.370x70.022._9.370x70.023._
*****
A
A1
HB
7,0 mm
8,0 mm
8,0 mm
8,0 mm
10,0 mm
10,0 mm
150
250
295
295
375
375
55
52
55
55
80
80
21
22
22
22
26
26
14
14
14
14
16
16
8
8
8
8
8
8
127
230
270
270
345
345
255 g
460 g
550 g
300 g
550 g
300 g
M
M
h1
h2
Art. No.
NBR (gr), NR-E (b)
NBR (gr), NR-E (b)
NBR (gr), NR-E (b), SBR (rb)
NBR (gr), NR-E (b), SBR (rb)
NBR (gr), SBR (rb)
NBR (gr), SBR (rb)
Stahl/Steel/Acier
Stahl/Steel/Acier
Stahl/Steel/Acier
Alu
Stahl/Steel/Acier
Alu
A B A1 H h1 h2
M 12AluminiumAluminum
Aluminium
ErsatzsaugerSpare cupVentouse de rechange
ErsatzsaugerSpare cupVentouse de rechange
Oval-/RechtecksaugerOval/rectangular suction cupsVentouses ovales/rectangulaires
verdrehgesicherttorsionally rigid
bloqué contre torsion
SW 17
SW 13
C
L
A40
32
Ø 6
M 20 x 2,5
1510
M 12
KM 4
SW 13
C = Hub Travel
Course
50.051 28 125
50.052 65 162
50.053 95 192
Art. No. A L C
175075
Saugerträger
Porteur pour ventouseSupport for suction cup
Serien mit Zubehör
Series with accessories
Séries avec accessoires
G 1/4"
HH2
G1A1
E1SW
ZZ
H1
ESW
AG Z
1425406085
1825324058
3039465575
3039465575
1214141517
1214141517
12,018,518,518,0 -
5888-
1/8"1/4"1/4"1/4"1/4"
1/8"1/4"1/4"1/4"1/4"
811111112
811111112
1417171722
8 5131513
22. 014.007._22. 025.026._22. 040.043._22. 060.063._22. 085.074._
22. 014.006._22. 025.027._22. 040.042._22. 060.064._22. 085.075._
23. 014.010._23. 025.030._23. 040.042._23. 060.059._ ---
Innengewinde Außengewinde ErsatzsaugerInternal thread External thread Spare CupFilet femelle Filet mâle Vent. de rechange
H
H1
SWE
AG
E1
G1
H2
SW
A1Z Z
Z
10141830406085
15232235455583
27 35 34 50 60 70100
27 35 34 50 60 70100
12121215151517
12121215151517
101212191619 -
555878-
1/8"1/8"1/8"1/4"1/4"1/4"1/4"
1/8"1/8"1/8"1/4"1/4"1/4"1/4"
8 8 811111112
8 8 811111112
14141417171722
310 813202438
20. 010.010._20. 014.014._20. 018.023._20. 030.041._20. 040.051._20. 060.070._20. 085.081._
20. 010.009._20. 014.013._20. 018.022._20. 030.042._20. 040.052._20. 060.071._20. 085.080._
21. 010.004._21. 014.006._21. 018.011._21. 030.019._21. 040.025._21. 060.036._ ---
Ø H H1 H2 A A1 D D1 E E1 G G1 SW Z
Ø H H1 H2 A A1 D D1 E E1 G G1 SW ZH
Z
Z
E1
G1
H2
A1
Z
H1
ESW
AG
1 = NBR (sw), 2 = Si (r), 5 = PUR (b + bl),4 = NR-E (bg) 40° Shore, 7 = FKM (g),15 = EPDM (gr) +150°C / - 50°C
2034537596
1215182545
2430334362
2430334362
1215151817
1215151817
814 - -
56--
1/8"1/4"1/4"1/4"1/4"
1/8"1/4"1/4"1/4"1/4"
811111212
811111212
1417172222
2,52,53,04,08,0
110. 020.029._110. 034.055._110. 053.082._110. 075.092._110. 096.101._
110. 020.028._110. 034.054._110. 053.083._110. 075.093._110. 096.102._
112. 020.030._112. 034.058._ --- --- ---
SW
* * *
Ø Ø Ø
ØØØ
ØØØ
Ø D
Ø D
Ø D
Ø D1
Ø D1
Ø D1
Ø H H1 H2 A A1 D D1 E E1 G G1 SW Z
NBR, Si, PUR, NR-E, FKM
NBR, Si, PUR,NR-E
NBR, Si, PUR, NR-E
NBR, Si, PUR, NR-E
NBR, Si, PUR, NR-E,EPDM
NBR, Si, PUR, NR-E
NBR, Si, NR-E
NBR, Si, PUR, NR-E
NBR, Si, NR-E
NBR, Si
NBR, Si
NBR, Si, NR-E
NBR, Si, PUR,NR-E, EPDM
NBR, Si, NR-E
NBR, Si
NBR, Si
NBR, Si
MaterialMaterialMatière
Innengewinde Außengewinde ErsatzsaugerInternal thread External thread Spare CupFilet femelle Filet mâle Vent. de rechange* * *
MaterialMaterialMatière
Innengewinde Außengewinde Ersatzsauger Internal thread External thread Spare Cup Filet femelle Filet mâle Vent. de rechange* * *
MaterialMaterialMatière
SerienSeriesSeries
Sauger aus NR-E sind besonders gut zum Handling von Holzteilen geeignet.Suction cups made of NR-E are especially appropriate for handling of wooden elements.Les ventouses à vide dans NR-E sont spécialment appropriés pour manipouler de éléments de bois.!
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.com
3.1
3/20
05Fax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
Die Klassiker / The Classic Line / La Ligne Classique
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.com
Ø 11 mm -
Ø 15 mm
3.2
* Art. No. bei Bestellung mit angegebenem Material ergänzen.* When ordering add indicated material.* En cas de commande veuillez ajouter le matériel indiqué.
Andere Materialien auf Anfrage (siehe Materialliste INFO 4).Other materials on request (see materials list INFO 4).Autres matériaux sur demande (voir list des matériaux INFO 4)
3/20
05Fax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
Art.No. 23.011.007._*
Ø 11
17
9,5
270.003270.015270.104270.134
Art.No.
Ø 9
Ø 4
1/8" AG1/8” IGM 6 AGM 5 AG
NBR (sw),Si (tr),PUR (or) 5,0 mm 0,6 g
Ø 6270.003270.015270.104270.134
Art.No.1/8" AG1/8" IGM 6 AGM 5 AG
Art. No. 23.011.173.2 Si (tr)3,5 mm 1,0 g
Ø 9
Ø 4
Ø 3,5
Ø 11
Ø 12
10
16
4
1,5
BalgensaugerBellows suction cupsVentouses à soufflets
270.003270.013270.103270.110
Art.No.
Art. No. 23.014.010._
Ø 14
18
5,5
*
Ø 12
Ø 5
1/8" AGM 5 AGM 6 AG1/8" IG
NBR (sw),Si (r), NR-E (b)PUR (b), FKM (g) 8,0 mm 1,2 g
Ø 5
270.033270.035
Art.No.
Art.No. 23.015.098.V
1/8" AG1/8" IG
Vinyl (bl)Si (tr)
NBR (sw), Si (tr),NR (gr)HNBR (wr)
5,0 mm 1,2 g
Ø 9
Ø 4,5Ø 3,5
Ø 6
Ø 16,5Ø 15
3
11
20
Art.No. 21.012.115._*
Art. No. 25.014.065.2
Ø 10
Ø 5
Ø 5
Ø 14
7,5
28
270.013270.110270.238270.194
270.013270.110270.238270.194
Art.No.
Art.No.
M 5 AG1/8" IG1/8" AG1/4" AG
M 5 AG1/8" IG1/8" AG1/4" AG
12 mm 1,9 g
7 mm 1,0 g
Ø 10
Ø 5
Ø 5,2
Ø 12
9
21
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.com
Ø 15 mm -
Ø 20 mm
3.3
* Art. No. bei Bestellung mit angegebenem Material ergänzen.* When ordering add indicated material.* En cas de commande veuillez ajouter le matériel indiqué.
Andere Materialien auf Anfrage (siehe Materialliste INFO 4).Other materials on request (see materials list INFO 4).Autres matériaux sur demande (voir list des matériaux INFO 4)
5/20
05Fax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
BalgensaugerBellows suction cupsVentouses à soufflets
270.009270.301
Art.No.
Art. No. 23.015.122._
Ø 8,5
Ø 6
Ø 4
Ø 7,7
Ø 15Ø 17
2
210
16
*
1/8" AGM 5 AG 5,0 mm 1,0 g
NBR (s),Si (tr), PUR (bl)FKM (g)
50.32950.33050.331 270.242
270.015270.104270.134
270.238270.109270.317270.378
Art.No. Art.No.1/8" AG1/8" IGM 6 AGM 5 AG
1/8" AG (Ø 4)1/8" IG (Ø 3,3)M 5 AG (Ø 2,5)M 8 AG (Ø 0,4)
Art. No. 23.016.174.2 Art. No. 21.018.118.1Si (tr) NBR (gr)
5,0 mm 10 mm1,2 g 3,0 g
Ø 9
Ø 4
Ø 8
Ø 16 Ø 8
Ø 16Ø 10
Ø 5
Ø 18Ø 17,5
10
19
5
1,5
Art. No. 23.018.177._
Art.No.
*
Ø 9
Ø 4
Ø 18
Ø 14
Ø 8
9,5
19,5
A
"A"
Si (tr)
NR-E (bl)) 7,0 mm 1,2 g
270.104 M 6 AG270.317 M 5 AG (SH 2,5)270.134 M 5 AG (SH 4,0)270.003 1/8" AG270.015 1/8" IG
Art. No. 25.018.060._*
Ø 9,5
Ø 3,5
Ø 7,5
Ø 18
7,5
28,5
270.134270.347270.318270.015
Art.No.
M 5 AGM 5 IG1/8" AG1/8" IG
NBR (sw),
Si (tr)55° Shore 12 mm 2,0 g
Art. No. 23.019.119._*
270.003270.013270.103270.109270.194
Art.No.
Ø 10
Ø 4,7
Ø 10
Ø 19
15
9
1/8" AGM 5 AGM 6 AG1/8" IG1/4" AG
NBR (sw),Si (tr)HNBR (wr) 4,0 mm 1,7 g Art. No. 21.020.016._*
270.003270.013270.015270.103270.194
Art.No.
Ø 20
Ø 9,5
Ø 4,5
Ø 10
9
23
1/8 AGM 5 AG1/8" IGM 6 AG1/4" AG
NBR (sw), NR (gr), CR (g)Si (tr), Si-E (tr)PUR (bl), HNBR (wr) 8 mm 2,2 g
8
1
6,5
22
55° Shore
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.com
Ø 22 mm -
Ø 33 mm
3.4
3/20
05Fax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
BalgensaugerBellows suction cupsVentouses à soufflets
270.003270.013270.015270.103
Art.No.
Art. No. 23.022.028._
Ø 22
Ø 24
Ø 4,7
Ø 1119
7
Ø 10
*
1/8" AGM 5 AG1/8" IGM 6 AG
NBR (sw),Si (tr), NR (gr) 8 mm 2,0 g 4,0 g
Art. No. 21.025.060._*
270.013270.103270.003270.109270.194270.066
Art.No.
Ø 10
Ø 5
33
6
Ø 10Ø 25
M 5 AGM 6 AG1/8" AG1/8" IG1/4" AG1/4" IG
NBR (sw),Si (tr),HNBR (wr) 19 mm
Art. No. 23.025.137._ NBR (sw)
Si (tr), NR (gr)
270.003270.013270.103270.109
Art.No.1/8" AGM 5 AGM 6 AG1/8” IG
Ø 10
Ø 5
Ø 10
Ø 25
22
6
*9 mm 2,4 g Art. No. 25.025.005._*
270.003270.013270.066270.103270.109270.194
Art.No.
Ø 10
Ø 5
43
6Ø 10
Ø 25
1/8" AGM 5 AG1/4" IGM 6 AG1/8" IG1/4" AG
NBR (sw),
Si (tr) 24 mm 5,6 g
Art.No. 21.032.075._*
Ø 18
Ø 15
Ø 8
Ø 16
Ø 32
134
37,5
NBR (sw), Si (tr),Si-E (tr), PUR (bl),HNBR (wr) 13 mm 10 g
270.114270.132270.192270.190
Art.No.1/8” IG1/8” AG1/4” IG1/4” AG
Strömungsventil:Flow valve:Soupape hydraulique:
Art. No.63.015
Ø 18
Ø 8
Ø 17
Ø 33
27
Art. No. 23.033.039._*NBR (sw),Si (tr),HNBR (wr) 12 mm 7,0 g
270.114270.132270.192270.190
Art.No.1/8” IG1/8” AG1/4” IG1/4” AG
Strömungsventil:Flow valve:Soupape hydraulique:
Art. No.63.015
Ø 43 mm -
Ø 53 mm
BalgensaugerBellows suction cupsVentouses à soufflets
Art. No. 23.043.096._*
Ø 43
28
Ø 18
Ø 8
NBR (sw),Si (tr), FKM (g)HNBR (wr) 12 mm 10 g
Ø 21
Ø 18
Ø 8
Ø 4346
Art. No. 21.043.049._*NBR (sw), HNBR (wr)Si (tr), Si-E (tr),PUR (bl), NR (gr) 19 mm 18 g
Ø 18
Art. No. 23.053.033._*
Ø 18
Ø 8
Ø 33
Ø 53
34
NBR (sw),Si (tr)PUR (ge) 70° Shore 11 mm 19 g
270.114270.132270.192270.190
270.114270.132270.192270.190
270.114270.132270.192270.190
Art.No.
Art.No.
Art.No.1/8” IG1/8” AG1/4” IG1/4” AG
1/8” IG1/8” AG1/4” IG1/4” AG
1/8” IG1/8” AG1/4” IG1/4” AG
Strömungsventil:Flow valve:Soupape hydraulique:
Strömungsventil:Flow valve:Soupape hydraulique:
Strömungsventil:Flow valve:Soupape hydraulique:
Art. No.63.015
Art. No.63.015
Art. No.63.015
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.com
3.5
3/20
05Fax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
Art. No. 21.050.084.V
270.101
Art.No.
1/4" AG
Vinyl (bl)20 mm 20 g
Ø 20Ø 11
Ø 29
Ø 50
Ø 813
,5
48
19
* Art. No. bei Bestellung mit angegebenem Material ergänzen.* When ordering add indicated material.* En cas de commande veuillez ajouter le matériel indiqué.
Andere Materialien auf Anfrage (siehe Materialliste INFO 4).Other materials on request (see materials list INFO 4).Autres matériaux sur demande (voir list des matériaux INFO 4)
Art. No. 25.048.056.2 Si (tr)25 mm 33,0 g
Ø 44
Ø 40,5
Ø 35
Ø 25
Ø 43,5
Ø 48
2,5
7
3,5
864
Ø 11
4 x Ø 6
Einsatzbereich:- Furniere- Laminate
Uses:
- Veneers
- Laminates
Application:- contreplaqués- laminés270.198
Art.No.
1/4" IG
BalgensaugerBellows suction cupsVentouses à soufflets
Ø 60 mm -
Ø 70 mm
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.com
3.6
* Art. No. bei Bestellung mit angegebenem Material ergänzen.* When ordering add indicated material.* En cas de commande veuillez ajouter le matériel indiqué.
Andere Materialien auf Anfrage (siehe Materialliste INFO 4).Other materials on request (see materials list INFO 4).Autres matériaux sur demande (voir list des matériaux INFO 4)
3/20
05Fax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
Art. No. 21.062.055 ._*
Ø 62
Ø 29
Ø 22
Ø 9
5349
270.093270.281270.282
Art.No.
NBR (sw),Si (tr), Si-E (tr)PUR (bl), HNBR (wr) 25 mm 50 g
1/8" AG1/4" AG1/4" IG
Art. No. 23.070.060._
270.145*270.184**
Art.No.
*
1/4" AG* 1/4" AG
NBR (sw), NR (sw)Si (tr), PUR (tr),Vinyl (bl) 20 mm 40 g
44
* MS vernickelt, Länge 33 mm* Brass nickel-plated, length 33 mm
* Laiton
** Alu, Länge 30 mm* *Alu, length 30 mm
* *Alu, longeur 30 mm
Ø 34
Ø 12
Ø 32
Ø 70
Option:Art. No. 270.184 +Art. No. 270.260 (IG 1/4", SW 19)
Art. No. 23.060.172._ Si (tr)NR (sw) 12,0 mm 40,0 g
270.281270.282
Art.No.1/4” AG1/4” IG
*
Ø 22
Ø 27
Ø 8
Ø 60
36
Art. No. 22.060.107._*
SW 20G 1/4"
Ø 26
Ø 60
51
15
Si (tr),NR (sw) 11 mm 45 g
Ø 3,55
Ø 80 mm -
Ø 85 mm
BalgensaugerBellows suction cupsVentouses à soufflets
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.com
3.7
3/20
05Fax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
* Art. No. bei Bestellung mit angegebenem Material ergänzen.* When ordering add indicated material.* En cas de commande veuillez ajouter le matériel indiqué.
Andere Materialien auf Anfrage (siehe Materialliste INFO 4).Other materials on request (see materials list INFO 4).Autres matériaux sur demande (voir list des matériaux INFO 4)
270.327
Art.No.
1/4” AG
Ø 32
Ø 24,5
Ø 12,5
Ø 79Ø 82
40
Hub
stro
keco
urse
Gesamthubstroke completecourse complet
29
Art. No. 107.082.090.2 Si (r)7,0 mm 41,0 g
Art. No. 20.080.117.13
Art. No. 22.080.144.13
Art. No. 22.080.149.13
SBR-B (rb)PUR (bg)
SBR-B (rb)PUR (bg)
SBR-B (rb)PUR (bg)
38 mm
23 mm
23 mm
80 g
60 g
70 g 270.326*
Art.No.
3/8" AG
Ø 49
Ø 17
Ø 80
Ø 51
57
Aluvulkanisiertvulcanizedvulcanisé
AluvulkanisiertvulcanizedvulcaniséØ 13,5
Ø 40Ø 48
Ø 41
Ø 80
39
153
319
270.364*
Art.No.
1/4” AG
*ohne Bohrung*without hole*sans forage
*ohne Bohrung*without hole*sans forage
Art. No. 22.085.140.V Vinyl (bl)
Ø 35
Ø 22
G 3/8"
Ø 85
Ø 30
8
41
7,0 mm 48 g
SW 19
15
G 1/4"
5 1239
Ø 41
Ø 80
SW 6
vulkanisiertvulcanized
vulcanisée
Ø 110 mm
Ø 150 mm
Ø 180 mm
Art. No. 22.180.086._
Art. No. 22.150.129._
*
*
Ø 94
Ø 78
Ø 80
Ø 65
G 1/2"
G 1/2"
Ø 84
Ø 75
Ø 180
Ø 150
10
10
60
60
BalgensaugerBellows suction cupsVentouses à soufflets
NBR (sw),Si (tr),NR (sw)
NBR (sw),Si (w),NR (sw)
NBR (sw),Si (tr),NR (sw)
20 mm
20 mm
20 mm 820 g
780 g
355 g
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.com
3.8
* Art. No. bei Bestellung mit angegebenem Material ergänzen.* When ordering add indicated material.* En cas de commande veuillez ajouter le matériel indiqué.
Andere Materialien auf Anfrage (siehe Materialliste INFO 4).Other materials on request (see materials list INFO 4).Autres matériaux sur demande (voir list des matériaux INFO 4)
3/20
05Fax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
Art. No. 22.110.128._*
Ø 78
Ø 65
G 1/2"
G 1/8"
Ø 55
Ø 110
10
45
23
StahlSteel
Acier
StahlSteel
Acier
StahlSteel
Acier
50.13850.139
50.13850.139
50.13850.139
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30 Telefax 089 / 96 24 89-11
Telefon 089 / 96 24 89 -0
www.fipa-online.com e-mail: [email protected]
Ø 200 mm
Art. No. 22.200.141.3
BalgensaugerBellows suction cupsVentouses à soufflets
3.9
3/20
05
* Art. No. bei Bestellung mit angegebenem Material ergänzen.* When ordering add indicated material.* En cas de commande veuillez ajouter le matériel indiqué.
NR (r)38 mm 520 g
Andere Materialien auf Anfrage (siehe Materialliste INFO 4).Other materials on request (see materials list INFO 4).Autres matériaux sur demande (voir list des matériaux INFO 4)
4x M 6, 6 tief/deep/profond
65
80
4141
30
30
25
2x M 86 tief/deep/profond
Ø128
Ø 120
Ø 139
Ø 200
17
8
55
Art. No. 22.200.087._*
Ø 121
G 1/2"18
50
Ø 137
Ø 200NBR (gr),Si (tr),NR (b) 30 mm 860 g
StahlSteel
Acier
Alu
Art. No. 22.250.088._*
Ø 250 mmØ 300 mmØ 350 mm
G 1/2"
Ø 171
Ø 250
Ø 185
60
18
BalgensaugerBellows suction cupsVentouses à soufflets
NBR (gr)Si (tr)NR (sw) 38 mm 1900 g
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30 Telefax 089 / 96 24 89-11
Telefon 089 / 96 24 89 -0
www.fipa-online.com e-mail: [email protected]
3.10
3/20
05
* Art. No. bei Bestellung mit angegebenem Material ergänzen.* When ordering add indicated material.* En cas de commande veuillez ajouter le matériel indiqué.
Andere Materialien auf Anfrage (siehe Materialliste INFO 4).Other materials on request (see materials list INFO 4).Autres matériaux sur demande (voir list des matériaux INFO 4)
50.13850.139
Art. No. 22.300.091.1
Art. No. 22.350.102.1
Ø 200
Ø 240
Ø 300
Ø 350
80
20
8
10
25
80
NBR (gr)
NBR (gr)
60 mm
55 mm
4200 g
4160 g
StahlSteel
Acier
StahlSteel
Acier
StahlSteel
Acier
SpezialformenSpecial shapesFormes spécifiques
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30 Telefax 089 / 96 24 89-11
Telefon 089 / 96 24 89 -0
www.fipa-online.com e-mail: [email protected]
4.1
3/20
05
Trennsauger
Separating Suction Cup
Art. No. 102.160.380.4Art. No. 270.380
NR (r)
40° ShoreAlu
Für luftdurchlässige Werkstoffe z.B.Holz, Preßspan, MDF, HDF usw.
Funktion:Bei luftdurchlässigen Werkstoffen wird in derMitte des Vakuumsaugers ein kurzer Druck-luftimpuls angelegt. Dadurch löst sich diezusätzlich angesaugte Platte und die oberePlatte kann separat abgestapelt werden.Das Druckluftniveau soll zwischen 1 bis 3 barliegen und ist abhängig von der Beschaffenheitdes Materials.
Pour pièces poreuses, par ex. bois presspan, MDF, HDF usw.
Fonction:Pour des pièces poreuses, une courte impulsion est générée au contre de la ventouse. Ceci à pour effet de libérer la plaque aspirée en
eretrop et seule la 1 plaque aspirée peut être manipulée.Le niveau de vide doit se situer entre 1 et 3 bar et dépend de la nature de matériau.
VakuumanschlussVacuum connection
Raccordement à vide
G 1/4" G 1/2"
40
Ø 27
Ø 37
Ø 120
Ø 160
6m
mHu
bTr
avel
Cour
se
25,5
6 mm 130 g 415 g
Art. No. 270.380
Sauger ohne Spezial-Anschlussteil / Suction cup withoutspecial fitting / ventouse sans raccord spécial
For porous materials,
e.g. wood, chipbaoard, MDF, HDF, etc.
Function:
To handle porous materials, a brief
compressed-air pulse will be applied
to the center of the suction cup.
This separates the additional board
picked up so that the upper board can
be placed separately. The compressed-
air level should be between 1 and 3 bars
and will depend on material properties.
Ventouse de séparation
Anschlussteil / Fitting / Raccord
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30 Telefax 089 / 96 24 89-11
Telefon 089 / 96 24 89 -0
www.fipa-online.com e-mail: [email protected]
4.2
6/20
05
SpezialformenSpecial shapesFormes spécifiques
Trennsauger
Separating Suction Cup
Ventouse de séparation
Art. No. 102.160.380.4
Theoretische Haltekraft bei 2-facher Sicherheit*:
Theoretical holding power with 2x safety margin*:
Force de maintien théorique ave un facteur de sécurité de 2*
*Das Druckluftniveau ist hier nicht berücksichtigt, da die Durchlässig-keit materialabhängig ist. Versucheführen wir gerne in unserem Hausedurch.
*No allowance made for the level of compressed air, since permeabilityis a function of the type of material.We shall be pleased to make suitabletests at this end.
*Le niveau d’air comprimé n’est ici paspris en compte, comme la perméabilitédépend du matériau manipulé. Nousserions ravis de procéder à des essaisdans nos locaux.
Vakuumgrad
Vacuum degree
Niveau de vide
Halte-kraft
Holdingpower
Force demaintien
Geeignete Vakuumerzeugung
Suitable vacuum generator
Génération de vide adéquate
20 % Vakuum30 % “40 % “50 % “60 % “
70 % “
20 % Vacuum30 % “40 % “50 % “60 % “
70 % “
20 % de vide30 % “40 % “50 % “60 % “
70 % “
8,5 kg14,0 kg19,0 kg23,5 kg28,5 kg
33,0 kg
8.5 kg14.0 kg19.0 kg23.5 kg28.5 kg
33.0 kg
8,5 kg14,0 kg19,0 kg23,5 kg28,5 kg
33,0 kg
SeitenkanalverdichterSeitenkanalverdichterVakuumpumpeVakuumpumpeVakuumpumpe oder Ejektor (Art. No. VCL15-02 8C-je Trennsauger)Vakuumpumpe oder Ejektor (wie oben)
Side channel blowerSide channel blowerVacuum pumpVacuum pumpVacuum pump or gene-rator (Art. No. VCL15-02 8C-per separating cup)Vacuum pump or generator (same as above)
Turbine à videTurbine à videPompe à videPompe à videPompe à vide ou venturi (Ref. Art. VCL15-02 8C- par ventouse de séparation))Pompe à vide ou venturi(voir ci-dessus))
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30 Telefax 089 / 96 24 89-11
Telefon 089 / 96 24 89 -0
www.fipa-online.com e-mail: [email protected]
4.3
3/20
05
SpezialformenSpecial shapesFormes spécifiques
Kammersauger
Chambered suction cups
Ventouses à chambre
11
11
11
15
15
15
20,5
20,5
20,5
1717
17
1111
11
A
A
A
A
A
A
A - A
A - A
A - A
550
550
550
170
170
170
Art. No. 90.103
Art. No. 90.102
Art. No. 90.101
EPDM (gr)
20° Shore
EPDM (gr)
20° Shore
EPDM (gr)
20° Shore
Für sägerauhe BalkenFor saw-cut beams pour poutres rugueuses
3 Kammern / 3 Chambers / 3 chambres
2 Kammern / 2 Chambers / 2 chambres
1 Kammer / 1 Chamber / 1 chambre
130 g
210 g
270 g
SpezialformenSpecial shapesFormes spécifiques
Art. No. 231.10,5x7,5.001.12 Art. No. 231.17x10.025.12Art. No. 231.5,5x4.015.2
4
40,6
Hub/travel/coursemax. 2 mm
2,6
2,5
5,5
Si (tr)EPDM,
35° (80°) ShoreNR (gr)
15° Shore
EPDM,
35° (80°) ShoreEPDM,
35° (80°) Shore
7,5
7,5
6
6
1,5
1,5
1,5
1,5
10,5
10,5
EPDM 80 °Shore
EPDM 80 °Shore
EPDM 80 °Shore
EPDM 35 °Shore
EPDM 35 °ShoreEPDM 35 °Shore
Art. No. 231.10,5x7,5.002.12Art. No. 231.26,5x15.003.12
Dichtprofilezum "Selberbauen"
Sealing profiles for“home-made” suction cups
Modeles pour ventouses“maison”
15
12
26,5
33
Diese Dichtprofile dienen dem Eigen-bau von Sauggreifern in jeder ge-wünschten Form. Sie sind speziell an unterschiedliche Werkstückgeo-metrien anpassbar.
Sie dienen der Abdichtung bei sehr rauhen oder stark strukturierten Oberflächen (z.B. Ornamentglas, bruchrauher Naturstein, Betonstein usw.)
These profiles may be used to make suction cups of any desired shape.They are well-suited for adaptation to awide range of different tool geometries.
The profiles serve to attain a vacuumwith very rough or textured surfaces,such as stained glass, rough naturalstone, concrete, etc.
Ces modeles peuvant etre utilisés pour fabriquer des ventouses de forme quelconque. Ils sont parfaite-ment concus pour s’adapter à diffe-rentes formes d’outillage.
Ces modeles sont utilisés pourattendre un vide necessaire aux surfaces rugueuses ou en textile,ters verre striè, pièrre naturelle,beton, etc.
Dichtprofile
Sealing profiles
Joints d’étancheité profilé
Standardlänge 20 000 mmStandard length 20 000 mmLongueur standard 20 000 mm
Standardlänge 1000 mmStandard length 1000 mmLongueur standard 1000 mm
Standardlänge 1000 mm, (Endlosprofil lieferbar)Standard length 1000 mm,Longueur standard 1000 mm,
Standardlänge 1000 mmStandard length 1000 mmLongueur standard 1000 mm
Standardlänge 1000 mmStandard length 1000 mmLongueur standard 1000 mm
empfohlene Einbautieferecommended mounting depthprofondeur de montage recommandé
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30 Telefax 089 / 96 24 89-11
Telefon 089 / 96 24 89 -0
www.fipa-online.com e-mail: [email protected]
4.4
3/20
05
10
17
10
53°R 0,5
65 g/m
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30 Telefax 089 / 96 24 89-11
Telefon 089 / 96 24 89 -0
www.fipa-online.com e-mail: [email protected]
4.5
6/20
05
Art. No. 231.2000x1000.005.12
(Art. No. 231.180x600.024.12)
Art. No. 231.2120x920x25.017 231.2120x920x25.018 231.2120x920x25.019
Art. No. 231.10x10.023.12Art. No. 231.20x15.004.12
Art. No. 231.20x10.007.12
Art. No. 231.20x10.027.12231.25x10.028.12
Standardlänge 1000 mmStandard length 1000 mmLongueur standard 1000 mm
Standardlänge 1000 mmStandard length 1000 mmLongueur standard 1000 mm
Standardlänge 1000 mmStandard length 1000 mmLongueur standard 1000 mm
Standardlänge 1000 mmStandard length 1000 mmLongueur standard 1000 mmStandardlänge 1000 mm
Standard length 1000 mmLongueur standard 1000 mm
Standardlänge 2000 mmStandard length 2000 mmLongueur standard 2000 mm
Art. No. 231.23x11x5.010.12
Folie, selbstklebend(zum Abziehen)
Folie, selbstklebend(zum Abziehen)
Moosgummi (NR)Foam rubber (NR)Caoutchuc souple (NR) Moosgummi (NBR, gr)
Foam rubber (NBR,gr)Caoutchuc souple (NBR,gr)
Moosgummi (NBR, gr)Foam rubber (NBR,gr)Caoutchuc souple (NBR,gr)
Moosgummi NBR (gr)Foam rubber NBR (gr)Caoutchuc souple NBR (gr)
Moosgummi EPDM (sw)Foam rubber EPDM (sw)Caoutchuc souple EPDM (sw)
Moosgummi (NR)Foam rubber (NR)Caoutchuc souple (NR)
Moosgummi (NR)Foam rubber (NR)Caoutchuc souple (NR)
Moosgummi (NR)Foam rubber (NR)Caoutchuc souple (NR)
Moosgummi (NBR, s)Foam rubber (NBR, s)Caoutchuc souple (NBR, s)
Moosgummi (NBR, s)Foam rubber (NBR, s)Caoutchuc souple (NBR, s)
B
H
1000
(180)
2000(600)
15
B
H
Art.No. 231.10x6.006.12 10 6Art.No. 231.25x20.008.12 25 20
Art.No. 231.05.026.12 231.06.011.12
231.08.012.12 231.10.013.12 231.12.014.12
B H
Ø D E
10 B
20 H
7 9
14
8
2
E
Ø D
5 6 81012
~ 3,5~ 4,5~ 6,0~ 7,0~ 8,5
mm mm
empf
ohle
neEi
nbau
tiefe
reco
mm
ended
moun
ting
dep
thpr
ofon
deur
dem
onta
gere
com
man
dé
Art. No. 231.14x8x2.009.12
11
13
23
12
5
14
SpezialformenSpecial shapesFormes spécifiques
Dichtprofile
Sealing profiles
Joints d’étancheité profilé
Self-adhesive foil
(remove)
Self-adhesive foil
(remove)
Feuille auto-adhésive (retirer)
Feuille auto-adhésive (retirer)
B H10 1020 15
920
2120
25
Ohne FolieWithout foil
sans feuille
Dichte/
160 Microfine200 Fine
200 Media
1010
2025
B H
FIPA GmbH® D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.comVAKUUM-TECHN IKFax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
Der Handgreifer mit den vielen Vorteilen:
Keine Vakuumquelle erforderlichStarke HaltekraftEinfache HandhabungMit Entriegelungsknopf5 Größen lieferbarÄußerst preisgünstigAb Lager lieferbar
No vacuum pump requiredHigh holding powerEasy useWith release buttonAvailable in five different sizesHighly cost-efficientAvailable from stock
aucune source de vide nécessairegrande force de maintienmaniement simpleavec button de déverrouillagedisponible en 5 taillesextrêmement bon marchédisponible départ entrepôt
64.003.V 82 42 Vinyl/Vinyle64.004.1 115 63 NBR64.004.3 115 63 NR64.005.V 121 65 Vinyl/Vinyle
Art. No. D H Material mm mm Material Matériau
Art. No. D H Material mm mm Material Matériau
64.001.V 54 42 Vinyl/Vynile
64.002.V 66 48 Vinyl/Vinyle
D
H
D
H
Grabbers have many advantages:
Le préhenseur manuel offre de nombreux avantages
5/20
03
Saugerlippe:Suction lip:Lèvre de ventouse:
Ø 95 mm
126
mm
122 mm
PUR (sw)
Einsatzbereiche:FliesenGlasHolzKunststoff uvm.
Applications:tilesglasswoodplastic etc.
Applications:carreauxpièces en vetreboisplastique etc.
Art. No. 64.006.5
Handgreifer / Grabbers / Grappins
Saugheber / Suction lifter / GrappinsHebekraft:Lifting force:Force de levage:
15 kg
4.6
für glatte Oberflächenfor smooth surfacespour surfaces
®
Vakuum-AufspannplattenVacuum clamping devicesPlaques de serrage
5.1
VAKUUM - AUFSPANNPLATTENmit Kugelventil und Löseknopf
Ausführung: rund oder rechteckig Material: eloxiertes Aluminium mit Dichtlippen aus NBR,Silikon oder NR, andere Materialien auf Anfrage Einsatz: für Glasplatten, Holz, Marmor, Blech - auch mobil einsetzbar!
Ausführung mit Löseknopf:für die Unterbrechung des Vakuums nach unten2 Vakuum- 1x für das Vakuumspannen nach unten,
Sie können diese Aufspannplatten an beliebiger Stelle auf einer planen Fläche mittels Vakuum festspannen und das zu haltende Teil auf die Spannplatte legen. Erst durch das Gewicht oder durch kurzes Andrücken des Auflageteils wird das Vakuum über das Kugelventil aktiviert. Das vakuumgespannte Teil kann nun bearbeitet werden. Durch Drücken des seitlichen Löseknopfes wird das nach unten wirkende Vakuum unterbrochen und Sie können die Aufspannplatte mit dem bearbeiteten Teil versetzen, ohne daß das Vakuum nach oben beeinträchtigt wird.
Die Vakuum-Aufspannplatten sind auch Löseknopf und Kugelventil lieferbar.
Eingänge: 1 x für die Auflage oben
So funktioniert es:
Deshalb sind die Aufspannplatten universell einsetzbar.
ohneohne
PLAQUES DE SERRAGE À VIDEavec soupape à bille et bouton de dégagement
VACUUM CLAMPING DEVICESwith ball valve and release button
Design: Circular or rectangular;
Material: Anodized aluminium with NBR, silicone or NR sealing lips (other marerial on request
For use on: Glass plates, wood, marble, sheet metal, etc. - also suitable for mobile use!
Version with release button: to cut the downward vacuum
Two vacuum 1x for vacuum clamping on underside,
The devices can be vacuum-clamped anywhere on a flat surface and the workpiece placed on top. The vacuum is activated via the ball valve either by the weight of the workpiece or by brief pressure on it. The vacuum-clamped part can then be worked. Depression of the lateral release button interrupts the downward vacuum, and the device with the workpiece on top can be shifted without disturbing the upward vacuum.
The devices can also be supplied a release button and ball valve.
inlets: 1x for workpiece on top
And this is how its works:
The system is extremely flexible.without
Version: rondes ou carré
Matériaux: aluminium anodisé avec lèvres d'étanchéitéen NBR,silicone ou NR, autres matériaux sur demande.
Utilisation: pour des plaques en verre, en bois, marbre,tôle, etc. - utilisable également d'une manièremobile!
La version avec button de dégagement:
2 entrées à vide: 1x pour le serrage à vide vers le bas, 1x pour la pièce appliquée en haut.
Vous pouvez serrer ces plaques de serrage, au moyen du vide, à n'importe quel endroit sur une surface plane et poser la pièce à maintenir sur la plaque de serrage. Le vide n'est activé par la sou-pape à bille que par le poids ou une brève pression de la pièce appliquée. La pièce serrée par vide peut être main-tenant traitée. En appuyant sur le bouton de dégagement latéral, le vide agissant vers le bas est interrompu et vous pouvez déplacer la plaque de serrage avec la pièce traitée sans porter atteinte au vide vers le haut.
Les plaques de serrage à vide sont également disponibles bouton de dégagement ni soupape à bille.
pour l'interruption du vide vers le bas.
Cela fonctionne comme ceci:
Cela rend les plaques de serrage utilisable universelle- ment.
sans
KugelventilBall valveSoupape à bille
9/20
03
FIPA GmbHVAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30 Fax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
www.fipa-online.com e-mail: [email protected]
Auszug aus unserem Gesamtprogramm. Bitte Unterlagen anfordernExerpt from our complete program. Please ask for more information.Extrait de notre programm complet. Demandez nos catalogues.
Vakuum-EingängeVacuum inletsEntrées à vide
LöseknopfRelease buttonBouton de dégagement
SpannplatteTopPlaque de serrage
KugelventilBall valveSoupape à bille
Vakuum-AufspannplattenVacuum Clamping DevicesPlaques de serrage
5.2
® FIPA GmbHVAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.com
Ø 165
Ø890
Ø 50
Ø 64
Ø 110
Ø 154
AuflageflächeSupporting surfaceSurface de support
ErsatzlippeSpare lipLèvre de rechange
Art. No. 154.150.058._*
5/20
05Fax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
Protection (plastic band)Protection (bande en plastique)
Schutzauflage (Kunststoffband)
9
Art. No. 211.150.001._*
Aufspannplatten auf Anfrage:
Vacuum clamping devices on request:Plaques de serrage sur demande:
a) runde Ausführungenround design / disposition ronde
b) rechteckige Ausführungensquare design / disposition rectangulaire
65 85114154*254
114154254
75 x 50 76 x 41120 x 90150 x 75300 x 80300 x 150
120 x 90150 x 75300 x 80300 x 150
213.75x50.020._212.76x41.001._212.120x90.002._212.150x75.003._212.300x80.004._212.300x150.005._
212.120x90.006._212.150x75.007._212.300x80.008._212.300x150.009._
90 90 90 90 90
160160160
90 90 90 90 90 90
160160160160
Ø der SauglippeDiam, of the lip
Ø de la lèvre
Länge x Breite der SauglippeLength x width of the lip
Longeur x largeur de la lèvreHöheHeightHauteur
HöheHeightHauteur
mm
mm
mm
mm
Hinweis: Bevorzugtes Material in derHolzindustrie ist Naturgummi. Weitere Materialien: NBR, SilikonAlle Sauglippen sind als Ersatzlippen lieferbar.
Höh
eH
eigh
tH
aute
ur
NR (sw)NBR (sw), Si (tr)
Note: Natural rubber is the material preferably used in the wood-processing industry.Other materials: NBR, SiliconeAll suction lips are available as spares.
210.065.040._*211.085.002._*211.110.003._*211.150.001._*211.250.004._*
211.110.005._*211.150.006._*211.250.007._*
Art. No.
Art. No.
Der Aufbau dieser Aufspannplatten ist ähnlich wie in der Abbildung oben.
La construction de ces plaques de serrage s’effecture comme illustré plus haut.The design of these clamping devices is similar to the one shown above.
Indication: Le matériel favori dans l’industrie du bois est un caoutchouc naturel.Autres matériaux: NBR et SiliconeToute les lèvres d’aspiration sont livrablecomme lèvres de remplacement.
KugelventilBall valveSoupape à bille
VakkumanschlüsseVacuum inletsEntrées à vide
untenbelowen bas
obenupen haut
SW 30
SW 30
4032
Ø 6
M 20
15
9
L-Typ auf AnfrageL-type on request
L-type sur demande
Art. No. 60.005
H
C
L
43
22
50.062 28 124 1750.063 65 161 5050.064 95 191 74
Art. No. H L C
SW 17
M 12
SW 20
verdrehgesicherttorsionally rigid
bloqué contre torsion
Art. No. 60.005
SW 17
SW 13
C
L
A40
32
Ø 6
M 20
1510
M 12
KM 4
4322
L-Typ auf AnfrageL-type on request
L-type sur demandeSW 8
50.051 28 125
50.052 65 162
50.053 95 192
Art. No. A L C
174565
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30 Telefax 089 / 96 24 89-11
Telefon 089 / 96 24 89 -0
www.fipa-online.com e-mail: [email protected]
6.1
3/20
05
FederstößelSpring LevelersPorte-ventouses
M 5 IGM 12 AGM 16 AG
L
H
C
G 1/8"
M 5
M 5
SW 7
SW 7
15
SW 14
Art. No. 50.14950.150
C L H1020
4759
22,534,5
Art. No. 50.15250.153
C L H1020
4759
22,534,5
L
H
C
G 1/8"
M 5
M 5
SW 7
SW 7
15
SW 14
Ø 20
M 35 x 1,5
5
50H
C
L L
11
5
M 12 M 16
KM 7
50.099 37 55 126
50.100 75 110 181
50.101 37 55 126
50.102 75 110 181
Art. No. C H L Art. No. C H L
kein Vakuumanschlussno vacuum connection
pas de raccordement à vide
C = Hub
Travel
Course
G 1/4" G 1/4"
verdrehgesicherttorsionally rigid
bloqué contre torsion
Art. No. 50.123
SW 11
SW 19
SW 11
M 14 x 1,5
G 1/8”
G 1/8”
57
2215
9,5
C=10
mm
10
SW 13
SW 20
SW 14
SW 14
80
73
C=20
mm
3515
8
G 1/8”
G 1/8"
Art. No. 50.124
M 16 x 1
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30 Telefax 089 / 96 24 89-11www.fipa-online.com e-mail: [email protected]
6.2
3/20
05
Art. No. 50.048
SW 14
SW 19
SW 19
C=25
mm
34,5
5
5
3026
Ø 4
G 1/4"
100,
5Ø 5
G 1/8"
SW 14
Ø 16
G 1/8”
FederstößelSpring LevelersPorte-ventouses
1/8" AG
SW 10
SW 19
SW 19
3035
,5
C=
26m
m
17,5
Ø 4
M 12 x 1,25
83
SW 12
58
21,5
11L-Typ auf Anfrage
L-type sur demandeL-type on request
G 1/8"
Art. No. 50.055
SW 8
verdrehgesichert
bloqué contre torsiontorsionally rigid
Art. No. 60.004
C = Hub
Travel
Course
M 5
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30 Telefax 089 / 96 24 89-11
Telefon 089 / 96 24 89 -0
www.fipa-online.com e-mail: [email protected]
6.3
3/20
05
FederstößelSupports for suction cupsPorteurs pour ventouses
1/8" AG1/8" IG
SW 17
SW 27
SW 27
SW 14
CH40
29
Ø 6
M 18 x 1,5
13
L
50.028 25 37 119
50.029 55 77 159
50.030 80 110 192
Art. No. C H L
G 1/8"
SW 10
SW 19
SW 19
3035
,5
C=
26m
m
17,5
Ø 4
M 12 x 1,25
83
SW 1216
21,5
11
L-Typ auf Anfrage
L-type sur demandeL-type on request
G 1/8"
Art. No. 50.056
SW 8
verdrehgesichert
bloqué contre torsiontorsionally rigid
Art. No. 60.004
Art. No. 50.160
93
6,5
42,5
30
C=25
mm M 16 x 1
SW 12
SW 14
SW 22
G 1/8"
G 1/8"
Art. No. 50.162
124
6,5
3073
,5
C=50
mm
M 16 x 1
SW 12
SW 14
SW 22
G 1/8"
G 1/8"
C = Hub
Travel
Course
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30 Telefax 089 / 96 24 89-11
Telefon 089 / 96 24 89 -0
www.fipa-online.com e-mail: [email protected]
6.4
5/20
05
FederstößelSupports for suction cupsPorteurs pour ventouses
1/4" AG1/4" IG
50.015 25 37 126
50.016 55 77 166
50.017 80 110 199
Art. No. C H L
SW 17
SW 27
SW 27
SW 19
CH40
29
Ø 6
M 18 x 1,5
1010
L
G 1/4"
Art. No. 50.164
Art. No. 50.166
SW 17
SW 24
M 20 x 1,5
SW 17
G 1/4"
G 1/8"
95
4041
8,5
C=25
mm
SW 17
SW 24
M 20 x 1,5
SW 17
G 1/4"
G 1/8"
154
408,
5
C=75
mm
100
SW 17
SW 30
SW 30
SW 20
4032
Ø 6
M 20
30
G 1/4"
H
L
50.105 28 130 1750.106 65 167 5050.107 95 197 74
Art. No. H L C
L-Typ auf Anfrage
L-type sur demandeL-type on request
Art. No. 60.005
43
22
C
G 1/4"
G 1/4"
C = Hub
Travel
Course
Art. No. 50.050
SW 24
SW 24
2151
6
G 1/8”
M 20 x 1,5
13
G 1/4”
91
C=
42m
m
Ø 14
EdelstahlStainless steelAcier spécial
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30 Telefax 089 / 96 24 89-11
Telefon 089 / 96 24 89 -0
www.fipa-online.com e-mail: [email protected]
6.5
3/20
05
FederstößelSupports for suction cupsPorteurs pour ventouses
Art. No. 60.005
SW 17
H
C
L
5016
40
Ø 6
M 35 x 1,5
G 3/8"
KM 7
43
22
L-Typ auf AnfrageL-type on request
L-type sur demande
50.092 55 161 3750.093 110 216 75
Art. No. H L C
Ø 11,5
SW 30
SW 30
4032
Ø 6
M 20
25
G 3/8"
L-Typ auf AnfrageL-type on request
L-type sur demande
Art. No. 60.005
H
C
L
43
22
50.070 28 125 1750.071 65 162 4550.072 95 192 65
Art. No. H L C
3/8" AG3/8" IG
1/2" AG1/2" IG
G 1/4"
G 1/4"
SW 17
SW 27
SW 27
CH40
29
Ø 6
M 18 x 1,5
L
50.031 25 37 138
50.032 55 77 178
50.033 80 110 211
Art. No. C H L
G 1/2"
SW 30
32
Art. No. 60.007
C50
10
5
45
Ø 9
M 35 x 1,5
G 1/2"
5125
50.13850.139
Art. No. C L Hub/travel/course
3784
55110
165220
G 1/4"G 3/8"
C = Hub
Travel
Course
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30 Telefax 089 / 96 24 89-11
Telefon 089 / 96 24 89 -0
www.fipa-online.com e-mail: [email protected]
6.6
5/20
05
FederstößelSpring LevelersPorte-ventouses
G 1/8" AGG 1/4" AG
C = Hub
Travel
Course
SW 1
SW 1
SW 2
E
G 1
G
L
BF
D
C
SW
Spezial-Federstößel,verdrehgesichertmit langer Führung
Special support,torsionally rigid with long guidance
Porteur spécial,bloqué contre torsionavec guidage longue
50.11150.11250.11350.11450.11550.11650.11750.11850.119
76 86112112127127147147158
232342424242424250
152525254040606040
G 1/8”G 1/8”G 1/8”G 1/4”G 1/8”G 1/4”G 1/8”G 1/4”G 1/4”
M 5M 5G 1/8"G 1/8”G 1/8”G 1/8”G 1/8”G 1/8”G 1/4”
38,548,549,549,564,564,585,585,583,0
M 12 x 1M 12 x 1M 18 x 1M 18 x 1M 18 x 1M 18 x 1M 18 x 1M 18 x 1M 28 x 1,5
171724242424242436
141421212121212132
6 6 8 8 8 8 8 810
L B C D E F G G 1 SW1 SW2Art. No.
MS vernickeltnickel-plated brassle laiton nickelé
MS vernickeltnickel-plated brassle laiton nickelé
Stahl, vernickeltSteel, nickel-plated
Acier, nickelée
SW 17
M 14x1
Ø 10
Ø 18
Ø 10,5
M 6x1
Ø 3
Ø 12,5
7,5 13
,51,
5
1,5
Ø 6
11,5
14
L
H
verdrehgesicherttorsionally rigidbloqué contre torsion
verdrehgesicherttorsionally rigidbloqué contre torsion
50.095 20 62 30
50.096 30 74 42
50.097 40 88 56
50.098 50 100 68
Art. No. C L H
C
M 6
G 1/8"
119
1942
38
C=
25m
m
614
Ø 4,5
G 1/4"
25
SW 14
M 18 x 1,5
Ø 10
Art. No. 50.157
EdelstahlStainless steelAcier spécial
Kunststoff-GleitbuchsePlastic sliding bush
Douille coulissante enplastique
®
Art.No. 270.199
Art.No. 270.201 Art.No. 270.202
G 1/4”
Ø 5
G 1/4”
Ø 30
88
2311
,511
,5
46
SW 17
SW 17
G 1/4” G 3/8”
Ø 9 Ø 11
G 1/4” G 3/8”
Ø 30,5 Ø 30,5
7 7
7 7
18 1832 32
SW 25
SW 25
SW 25
SW 25
Flexible Gelenke
Flexible joints
Joints flexibles
Flexible Gelenke eignen sich für alle Saugertypen in beliebiger Form. Sie passen sich ideal an die zum Sauger geneigten Flächen an.
Flexible joints are suitable for all types of suction cups.They adapt perfectly to inclined surfaces.
Jointures flexibles adaptables pour tous types de ventouses.Parfait pour faces inclinées.
Flexible GelenkeFlexible jointsJoints flexibles
6.7
Metallmetal
métal
Metallmetal
métal
Metallmetal
métal
Gummirubber
caoutchouc
Gummirubber
caoutchouc
Gummirubber
caoutchouc
270.199
270.201270.202
Tragkraft / load capacity / force de levage
Tragkraft / load capacity / force de levage Tragkraft / load capacity / force de levage
10° 10°10° 10°
max. 50 kg
max. 50 kgmax. 85 kg
25° 25°
(vertikal/vertical)
(vertikal/vertical) (vertikal/vertical)5/
2005
FIPA GmbHVAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30 Fax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
www.fipa-online.com e-mail: [email protected]
®
Art. No. 270.073Art. No. 270.072
Art. No. 270.075
G 1//8"
Ø 215° 15°
15°
SW 14
SW 14
SW 4G 1/8"
26,5
13,5 8,
5
1517
7
1,5
1,5
SW 19
SW 19
G 1/4"
G 1/4"37
,5
19,7 12
2224
10
G 1/2"
Ø 4
G 1/2"
40
1,5
24,7
14
27,5
23
12
SW 6
SW 24
SW 24
Tragkraft / load capacity / force de levage Tragkraft / load capacity / force de levage
Tragkraft / load capacity / force de levage
max. 30 kg max. 150 kg
max. 250 kg
(vertikal/vertical) (vertikal/vertical)
(vertikal/vertical)
3/20
05
FIPA GmbHVAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30 Fax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
www.fipa-online.com e-mail: [email protected]
KugelgelenkeBall jointsJoints à rotule
G 1/8"
G 1/4"
G 1/2"
Art. No. 270.050
30
SW 5
SW 17
SW 24
117
3,5
30
19
61,5
G 1/4"
G 1/4"
Ø 4
Ø 28
o
Tragkraft / load capacity / force de levagemax. 150 kg(vertikal/vertical)
6.8
7.1E
®
Flow Valves
Flow Valves
SW 17
G 1/4”
G 1/4”
95
9
23
G 1/4”
Ø 8
Ø 8
G 1/4”
Ø 20
Ø 13,5
Ø 7
Ø 5
40
4
236
11
G 1/4”
G 1/4”
105
10
25
102.060.303102.080.304102.095.304
20.030.04420.040.05422.044.03420.050.05820.050.06420.050.06520.060.072Art. No. 63.013 Art. No. 63.015 Art. No. 63.016
Ø 5
Ø 7Ø 9
Ø 14
29
2 144
11
SW 17SW 17
SW 21
23.033.03923.043.09623.053.03321.032.07921.043.04921.062.055
23.075.151
Recommended suction cupsRecommended suction cup
Recommended suction cups
connection sidecup carrier
connection sidevacuum cup
flow pin
Flow valves are mainly used in the handling area whereparts of different dimensions are lifted. Thus, they preventa breakdown of the vacuum circuit. Inside, a flow pin (with bore) is integrated that provides for a controlled suction volume of each vacuum gripper. Upon suction, the flow valve automatically closes the cross section of the suction line.However, it allows a low volume flow through the bore hole intothe valve. The flow valves have a very low leakage loss and canbe mounted in any position. They work free of wear and noiseand are also suitable for high cycle rates.Under normal conditions, the flow valves are maintenance-free.In a dirty environment, it is recommended to blow with com-pressed air against the suction direction upon putting downthe parts.
Technical Description for Art. No. 63.036 - 63.038:Flow valves (with flow pin)
2,32,32,3
3,33,33,3
272727
Required min. suctioncapacity in m³/hfor system pressurePU = -0,3 bar
Required min. suctioncapacity in m³/hfor system pressurePU = -0,6 bar
Max. flow in m³/h
upon blowing off
(P = 5 bar)
with Flow Pin
with Self-Cleaning Effect
60 mm80 mm95 mm
0,8 mm1,2 mm1,5 mm
0,6 m³/h1,0 m³/h2,0 m³/h
0,46 m³/h1,04 m³/h1,62 m³/h
63.03663.03763.038
Leakage loss
3/20
05
FIPA GmbHVAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30 Fax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
www.fipa-online.com e-mail: [email protected]
Art. Nr. Cup-Ø(recommended)
Flow pinbore Ø
Recommendedmin. suction capacity
Vertical installation
Vertical installation 63.01363.01563.016
Art. No.
New: With 1/8” screw fittings (please write for details)
7.2E
®
Automatic Closing Valves
The closing valves of this series work without leakage loss and have also shown good results under dusty and dirty condition (such as in wood working). The valves are adjusted by the manufacturer, but can be regulated in special cases. They can also be retrofitted.
Important! The closing valves of this series only work when vacuum is applied after the cup has touched the workpiece.1. Put on the cup2. Turn on the vacuum (ca. 1 - 2 seconds)3. Lift the part
Required suctioncapacity (per cup) For cup Ø
4 m³/h6 m³/h8 m³/h
to Ø 150 mmto Ø 250 mmto Ø 360 mm
Example: 15 cups Ø 220 mm 1 5 x 6 = 90 m³/h
Thus, vacuum pump with a suctioncapacity of 90 m³/h is required..
When using a vacuum reservoir, that valueis halved. In that case 15 x 3 = 45 m³/h (size of the vacuum reservoir uponrequest).
Energy is expensive! With our automatic closing valves "without leakage loss", we help you to save energy and money.
for Art. No. 63.046 and
63.004-63.005-63.006-63.007
without Leakage Loss
3/20
05
FIPA GmbHVAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30 Fax +49/(0)89 / 96 24 89-11www.fipa-online.com e-mail: [email protected]
with adjustment by works
Material: Alu,
Art. No. 63.006
Art. No. 63.046
SW
20
G 1/4"
G 3/8"14
12
59
G 1/8”
SW
1332
68
G 1/8”
Art. No. 63.004 Art. No. 63.005
G 3/8"
G 1/4"
1514
45S
W20
SW
20
G 1/4"
G 1/4"
1414
59
Art. No. 63.017 Art. No. 63.018Art. No. 63.007
G 1/8" G 1/4”
G 1/4" G 1/4"
9 9
15 15
41
SW
20 SW
17
G 3/8"
G 1/4"
1412
59
Required minimumsuction capacity
Maximum cup Ø(recommended)
for bellows cup Ø
1,74 m³/h
75 mm
33 mm
for Art. No. 63.017 + 63.018
Tel. +49/(0)89 / 96 24 89 -0
41S
W17
®
3/20
05
FIPA GmbHVAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30 Fax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
www.fipa-online.com e-mail: [email protected]
7.3
Strömungsventile für große SaugplattenFlow Valves for big suction platesSoupapes d’admission pour ventouses de grandes dimensions
R 3/4"
Einbaulage senkrechtVertical installationInstallation vertical
Einbaulage senkrechtVertical installationInstallation vertical
BeschreibungDie Strömungsventile verhindern das Einströmen atmosphärischer Luft in dasVakuumsystem, sobald das Vakuum-ventil auf Saugen geschaltet wird und das Transportgut nur teilweise oder nicht vom zugehörigen Vakuumsauger bedeckt ist. Hat das Strömungsventil einmal geschlossen, kann es nur durch Umschalten des Vakuumventils auf Belüften wieder geöffnet werden.VerwendungDie einwandfreie Funktion des Strö-mungsventils ist nur bei richtig ein-gestellter Strömungsgeschwindigkeitgewährleistet. Hierfür sollte ein in derMenge ausreichendes Betriebsvakuumvon ca. - 600 mbar vorgesehen werden.Das Strömungsventil kann nicht einge-setzt werden, wenn das Transportgutmit auf Kopf stehenden Vakuumsaugernangesaugt werden soll.EinbauDas Strömungsventil dieser Bauart wirddirekt in das Stahloberteil des Vakuum-saugers A eingeschraubt. Der AnschlussB wird direkt mit dem Vakuumventil verschraubt.
DescriptionLes soupapes d’admission empêchent à l’air atmosphérique de pénetrer le système de vide, quand la soupape à vide est en position aspiration et la pièce amanipuler n’est que partiellement ou pasdu tout en contact avec la ventouse.Une fois la soupape fermée elle ne peutêtre ré-ouverte que si la soupape à vide est repositionnée sur ventilation.
UtilisationLe bon fonctionnement de la soupaped’admission n’est garanti que pour unevitesse adéquate d’écoulement. Le videsuffisant est de -600 mbar dans ce cas.Ces soupapes ne peuvent être employées pour la pise de pièces avec ventouses vers le haut.
MontageCe type de soupapes d’admission est vissé directement dans la partie su-perieure metallique de la ventouse A.L’insert B est monté directement avecla soupape à vide.
Art. No. 63.042 Art. No. 63.043
GewichtWeightPoids
GewichtWeightPoids
249 g
DescriptionFlow valves prevent atmospheric air from entering the vacuum system when the vacuum valve is switched to suction and the workpiece is not or only partly covered by the corresponding suction cup. Once the flow valve has closed, it can only be reopened by switching the vacuum valve to ventilation.
UseProper operation of the flow valve is gua-ranteed only if an adequate flow velocity is set. A sufficient operating vacuum of approx. -600 mbar should be provided for the purpose. Flow valves cannot be used if the workpiece is to be gripped with the suction cups facing up.
MountingThis type of flow valve is screwed directly into the upper steel part of suction cup A.Connection B is screwed directly to thevacuum valve.
Schematic diagramSchematic
diagram
1320 g
SW
46
Diagramme schématique Diagrammeschématique
7.4
®
TastventilePlunger valvesPalpeurs
Art. No. 63.032
Empfohlene Vakuumsauger:Recommended cups:Ventouses recommandés102.060.303102.080.304102.095.305
C = Hub Travel
Course
Funktion:
Tastventile werden wie Strömungsventile (sieheSeite 7.1)und Strömungswiderstände in Anwen-dungen eingesetzt, wo die zu greifenden Objekte nicht oder nur teilweise vorhanden sein können. Besondere Vorteile sind die geringe Schmutzem-pfindlichkeit und die sichere Funktion.
Die Ventile sind in nichtbetätigtem Zustand ge-schlossen und mittels Feder vorgespannt.Bei Betätigen der Stösselstange wird das Vakuum freigegeben.
Operation:
Just like flow valves and flow resistances (see page 7.1), plunger valves are used in applications where the objects to be gripped may only be present in part or not at all. Special advantages of the valve are its low susceptibility to dirt and its safe functioning.
In a non-actuated state, the valves are closed and pretensioned by means of a spring. Upon actuation of the plunger, the vacuum is released.
Fonctionnement:
Les palpeurs sont utilisés comme les soupapes hy-drauliques et les résistances hydrauliques (voir page 7.1) là où les objets à saisir peuvent ne pas où par-tiellement exister. Les avantages sont une sensibilité moindre à la saleté et un fonctionnement plus sur.
Les soupapes sont fermées en position non action-nées et prétendues avec un ressort. L'actionnement de la tige de poussoir de soupape entraîne le dégage-ment du vide.
3/20
05
FIPA GmbHVAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30 Fax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
www.fipa-online.com e-mail: [email protected]
G 1/4”
SW 17
Ø 16,8
45
102
6,5
12
G 1/4”
7,2KunststoffSynthetic material
Matière plastique
C=10
mm
2,3
Art. No. 63.044
G 1/4”
SW 17
45
109
212
12
G 1/4”
7,2C = Hub Travel
Course
KunststoffSynthetic material
Matière plastique
C=10
mm
für große Saugplatten (rund oder oval)mit langer Einschraubtiefe
8.1
Der Hubzylinder wird an einen Vakuumerzeuger angeschlossen und mit Vakuum beaufschlagt. Der Hubkolben fährt aus und sofort, wenn durch den Kontakt des Saugers zum Werk-stück ein Unterdruck entsteht, wird dieses angesaugt und der Kolben fährt schlagartig wieder zurück. So wird das oberste Werkstück abgehoben, ohne dass der Saugeffekt auf die darunterlie-genden Werkstücke ausgeübt wird.Das Werkstück wird gehalten, bis das Vakuum abgeschaltet wird.
Gleichzeitiges Ansaugen und Heben von dünnen, porösen und flächigen Werkstücken Vereinzeln von Papier, Furnier u.a. Teileentnahme aus Spritz- gusswerkzeugen
123.025.010.1123.025.010.2123.030.019.1123.030.019.2
für/for Art. No. 55.000für Art. No. 55.001 + 55.004
270.030270.030270.030
102.035.056.1102.035.056.2102.035.056.5120.040.084.9 3/
2005
Einsatzbereich:
Funktion:
3. 4.
Befestigungsvorschläge für HubzylinderArt. No. 55.000, 55.001, 55.004
1. 2.1.2.3.4.
Fußbefestigung Flanschbefestigung Anschrauben von der Rückseite Gewindestift und Nutenstein
oder nach Kundenzeichnung
Vakuum-Hubzylinder,
Lifting Cylinders,
vakuumbetrieben
vacuum-operated
der gesamte Arbeitsablauf wirdnur durch das Ein- und Aus-schalten des Vakuums gesteu-ert; es sind keine zusätzlichen Ventile oder Zylinder nötig,kurze Taktzeiten, kein Zusam-mendrücken von vereinzelten Werkstücken,geringe Masse für schnellesPositionieren,Höhenunterschiede am Werk-stück werden ausgeglichen,verdrehgesicherter Kolben fürlagerichtige Entnahme,flexible Befestigungsmöglich-keiten.
Vorteile
Empfohlene Sauger und Anschlussteile / Recommended Suction Cups and Fittings
102.020.084.2104.015.072.1104.015.072.2
270.037270.153270.153
102.020.083.2102.020.080.1102.020.082.1
270.037270.037270.037
104.020.073.1104.020.073.2104.010.065.1
270.153270.153270.010
SW 19
Ø 16
7,5
SW 24DIN 439
SW 7
-0,2 M 5
3339,5
51,555,5
Hub
17S
troke
17
Ø 10M 16x1,5
M 22x1,5
M 59 tief
Ø 24
M 66 tief
9
SW 32DIN 439
SW 12
M 5 (G 1/8")
48(6
4)56 (7
3)72
(89)
78 (98)
Hub
25(4
0)
Ø 15
G 1/8"12 tief
SW 27
Ø 22 -0,2
Art. No. 55.000
Verdrehgesicherttorsionally rigid
Arbeitszyklen:25 Mio. bei normalen EinsatzbedingungenWorking Cycles:25 Mio.with normally uses
Beispiele
Examples
Ø 35 (Ø 36)M 88 tief
Art. No. 55.001
55.004
Verdrehgesicherttorsionally rigid
deep
deep
Str
oke
(40)
25
Suggested mounting variants
55.000, 55.001, 55.004
1. Foot mounting
2. Flange mounting
3. Rear screw-mounting
4. Headless screw and tongue
or to customer's specification
Die blauen Werte in Klammern be-ziehen sich auf die Art. No. 55.004.
The blue coloreddimensions are for Art. No. 55.004
8.1
Uses: Sucking and lifting thin, flat, porous workpieces Separating sheets of paper, veneer and similar materials Removing parts from injection- molding dies.
8.2
SW 17
G 1/ 8" 55
66
83
92
Hub
30St
roke
30
Ø 22
Ø 44
G 1/4"
Ø 59
M 1010 tief
Befestigungsvorschläge fürHubzylinder Art .No. 55.002
BA
Ø 35
Art. No. 55.002
A.B.
Anschrauben von der Rückseite Gewindestift und Nutenstein
oder nach Kundenzeichnung
Verdrehgesicherttorsionally rigid
Empfohlene Sauger und Anschlussteile für/for Art. No. 55.002
150.050.032.2150.050.032.5150.050.032.7150.050.032.9
270.181270.181270.181270.181
102.040.061.1102.040.061.2102.040.061.5
270.274270.274270.274
102.060.303.1102.060.303.2102.060.303.5103.075.025.5
270.191270.191270.191
3/20
05
Technische Daten / Specifications
* Der Volumenstrom ist am Anschluss gemessen. Auf ausreichende Schlauch-dimensionierung und min. Schlauchlänge zur Vakuum-erzeugung ist zu achten!
* Volume flow measured at coupling. Hoses should be properly dimensioned.Be sure to observe min. hose length to vacuum generator.
Beispiel
Example
Nicht geeignet bei luft-
durchlässigen Werkstoffen!
Art. No. 55.000 55.001 55.002 55.004HubStroke
Gewicht / Weight
Hubkraft bei -0,8 barLifting power at -0,8 barVolumenstrom*Volume flow*Taktzeit/DoppelhubCycle time/Up-and-down stroke
mm
N
kg
NL/min
sec
g
17 25 30 40
55 145 310 185
3 10 50 100,3 1,0 5,0 1,0
>15 >30 >35 >30
<0,3 <0,4 <0,7 <0,7
Einsatzbereich (55.002)Vorwiegend eingesetzt zum Heben und Abstapeln von Blechen und schweren Teilen.
Uses (55.002):Primarily for lifting and stackingsheet steel and heavy parts.
Recommended Suction Cups and Fittings
Neu! Hub 40 mmNew! Stroke 40 mm
Vakuum-Hubzylinder JUMBO
JUMBO Lifting Cylinders,
, vakuumbetrieben
vacuum-operated
Operating principle:The lifting cylinder is connected to a vacuum pump, and the vacuum is applied. The lifting piston moves out and sucks the work-piece as soon as it makes contact with the latter. The piston then retracts instantaneously, so that the uppermost workpiece is lifted off, while the pieces below are left untouched.The workpiece ist held until the vacuum is cut off.
Benefits: The entire work cycle is control- led exclusively by application of the vacuum; no additional valves or cylinders are required. Brief cycle times. No compression of presorted workpieces. Low mass ensuring rapid positioning. Leveling out of height differences on workpiece. Non-twisting piston for geometrically precise lifting. Flexible mounting.
Suggested mounting variants
for Art. No. 55.002
A.B.
Rear screw mounting. Headless screw and tongue or
to customer's specification.
(SW = width across flats)
deep
5 - 80EinsatztemperaturOperating temperature °C
Unsuitable for air-permeable materials!
HinweisDie Hubzylinder sind im Ruhe-zustand eingefahren.Note:In idle condition, the lifting cylinders are retracted
kälteflexibel, wasserbeständig bis 70 °C
Auszug aus unserer Materialübersicht / Excerpt from our general materials list / Extrait de notre liste de matériaux
4
NR(50 Shore A)
NR-E(40 Shore A)
Natur-kautschuk
Natur-kautschuk
SMR
SMR
-40 +80
-40 +80
hohe Standzeit
1
2
NBR(50 Shore A)
Si(50 Shore A)
Nitril-kautschuk
Silikon-kautschuk
Perbunan
Silicone
-40 +90
-40 +90
-40 +90
-40 +90
-70 +200
abdruckarm bei farblos, weiß, beige
abdruckarm bei farblos, weiß, beige3
5 PUR
CR(50 Shore A)
CR(50 Shore A)
CR(50 Shore A)
Poly-urethan Vulkollan
-25 +80
hohe Standzeit Vulkollan braun(sehr abdruckarm)
7
9
15
14
9
15
14
9
FKMFluor-kautschuk
Chloropren
Chloroprene
Chloroprene
Neoprene
Neoprene
Neoprene
Viton -20 +200
hoch chemikalienbeständig,sehr abdruckarm
V Vinyl
EPDM
HNBR
Polyvinyl-chlorid
HydrierterNitril-Kautschuk
PVC -20 +85
-40 +130
-40 +170
sehr hohe Standzeit
sehr hohe Standzeit
besonders witterungsbeständig
1
2
NBR(50 Shore A)
Si(50 Shore A)
-40 +90-70 +200
3 NR(50 Shore A)
-40 +80
Nitrilerubber
Siliconerubber
Perbunan0
cold-flexible, water-resistant to 70 C
anti-marking on colorless, white, beige surfaces
Naturalrubber
SMR anti-marking on colorless, white, beige surfaces
4
5
NR-E(40 Shore A)
PUR
-40 +80
-25 +80
Naturalrubber
Poly-urethane
SMR
Vulkollan
long service life
long service life Vulkollan brown(anti-marking)
7
V
FKM
Vinyl
EPDM
HNBR
-20 +200
-20 +85
-40 +130
-40 +170
-40 +130
-40 +170
Fluor-caoutchouc Viton high resistance to chemicals
Polyvinyl-chloride
Hydrogenatednitrile rubber
PVC long service life
long service life
highly resistant to hot water, vapor andchemicals
1
2
NBR(50 Shore A)
Si(50 Shore A)
-40 +90
-70 +200
3 NR(50 Shore A)
-40 +80
Caoutchoucnitrile
Caoutchoucsilicone
Perbunan
Silicone
flexible au froid, résistant à l'eaujusqu'à 70°
anti-trace pour incolore, blanc, beige
Caoutchoucnaturel
SMR anti-trace pour incolore, blanc, beige
4
5
NR-E(40 Shore A)
PUR
-40 +80
-25 +80
Caoutchoucnaturel
Poly-uréthane
SMR
Vulkollan
longue durée de vie
longue durée de vie, anti-trace
7 FKM -20 +200
Caoutchoucfluor
Viton haute résistance aux produits chimiques
V
15
14
Vinyl
EPDM
HNBR
-20 +85 longue durée de vie
longue durée de vie
Chlorure depolyvinyle
Nitrile Hydrogéné
PVC
= sehr gut/very good/très bonne = gut/good/bonne = genügend/sufficient/satisfaisante= nicht empfohlen/not recommended/ non recommandée
Mat.Nr.
Mat.No
N° demat.
Bezeichnung
Code
Brèvedésignation
Verschleiss-festigkeit
Wearresistance
Handels-name
(Beispiele)
HandelsüblicheBezeichnung
Commercialdesignation
Désignationcommerciale
Nomcommerciale
Tradename (e.g.)
Beständigkeit gegen
Résistance à
Spezielles
Specifics
Spécialité
Öl / Fett
oil/grease
l'huile/graisse
l'usure
Wetter/Ozon
weather/ozon
imtempéries/l'ozone
Benzin
gasoline
l'essence
Temp. °Cmin/max
Temp. °Cmin/max
Temp. °Cmin/max
highly weatherproof
part. résistant aux intémperies
Äthylen-Pro-pylen-Dien-Kautschuk
Ethylene-propylene-diene rubber
Ethylène-pro-pylène-diène caoutchouc
Buna
Buna AP
Buna AP
besonders beständig gegen Heiss-wasserdampf + Chemikalien
part. résistante à la vapeur d'eau chaude et aux produits
A 1
Art. No.
Seite
page
Seite
page
Seite
page
Seite
page
Art. No. Art. No. Art. No. Art. No.
A 2
9. 50x20.034.1 2.2 21. 060.036 3.1 50. 016 1.12 50. 150 6.1
9. 110x40.011 2.4 21. 062.055 3.6 50. 016 1.9 50. 152 6.1
9. 120x30.062 2.4 50. 016 6.4 50. 153 6.1
9. 123x43.076.13 2.6 22. 014.006 3.1 50. 017 1.10 50.157 6.6
9. 125x55.012 2.4 22. 014.007 3.1 50. 017 1.11 50. 160 6.3
9. 135x75.066.13 2.6 22. 025.026 3.1 50. 017 1.12 50. 162 6.3
9. 150x55.013.4 2.11 22. 025.027 3.1 50. 017 1.9 50. 164 6.4
9. 190x90.077.3 2.7 22. 040.042 3.1 50. 017 6.4 50. 166 6.4
9. 200x100.015 2.7 22. 040.043 3.1 50. 028 6.3
9. 200x100.054 2.7 22. 060.063 3.1 50. 029 6.3 55. 000 8.2
9. 200x20.063.1 2.7 22. 060.064 3.1 50. 030 6.3 55. 001 8.2
9. 200x55.014.1 2.5 22. 060.107 3.6 50. 031 6.5 55. 002 8.2
9. 200x55.053.3R 2.5 22. 080.144.13 3.7 50. 032 6.5 55. 004 8.2
9. 200x80.067.13 2.6 22. 080.149.13 3.7 50. 033 6.5 60. 004 6.2
9. 250x55.016 2.11 22. 085.074 3.1 50. 048 6.2 60. 004 6.3
9. 280x107.070.13 2.8 22. 085.075 3.1 50. 050 6.4 60. 005 6.1
9. 290x55.071.1 2.9 22. 085.140.V 3.7 50. 051 2.11 60. 005 6.4
9. 300x120.021 2.10 22. 110.128 3.8 50. 051 6.1 60. 005 6.5
9. 300x120.042.3 2.10 22. 150.129 3.8 50. 052 2.11 60. 007 6.5
9. 300x30.069.1 2.9 22. 180.086 3.8 50. 052 6.1
9. 300x40.064.1 2.9 22. 200.087 3.9 50. 053 2.11 63. 004 7.2
9. 300x55.019 2.11 22. 200.141.3 3.9 50. 053 6.1 63. 005 7.2
9. 300x55.019 2.8 22. 250.088 3.10 50. 055 6.2 63. 006 7.2
9. 300x55.020 2.11 22. 300.091.1 3.10 50. 056 6.3 63. 007 7.2
9. 300x55.020 2.8 22. 350.102.1 3.10 50. 062 6.1 63. 013 1.10
9. 300x55.045.3 2.8 50. 063 6.1 63. 013 1.11
9. 370x70.022 2.11 23. 011.007 3.2 50. 064 6.1 63. 013 1.12
9. 370x70.023 2.11 23. 011.173.2 3.2 50. 070 6.5 63. 013 1.9
9. 450x130.025 2.11 23. 014.010 3.1 50. 071 6.5 63. 013 7.1
23. 014.010 3.2 50. 072 6.5 63. 015 7.1
20. 010.009 3.1 23. 015.098.V 3.2 50. 092 6.5 63. 016 7.1
20. 010.010 3.1 23. 015.122 3.3 50. 093 6.5 63. 017 7.2
20. 014.013 3.1 23. 016.174.2 3.3 50.095-50.098 6.6 63. 018 7.2
20. 014.014 3.1 23. 018.177 3.3 50. 099 6.1 63. 032 1.11
20. 018.022 3.1 23. 019.119 3.3 50. 100 6.1 63. 032 1.9
20. 018.023 3.1 23. 022.028 3.4 50. 101 6.1 63. 032 7.4
20. 030.041 3.1 23. 025.030 3.1 50. 102 6.1 63. 036 1.9
20. 030.042 3.1 23. 025.137 3.4 50. 105 1.10 63. 036 7.1
20. 040.051 3.1 23. 033.039 3.4 50. 105 1.11 63. 037 1.10
20. 040.052 3.1 23. 040.042 3.1 50. 105 1.12 63. 037 1.12
20. 060.070 3.1 23. 043.096 3.5 50. 105 1.9 63. 037 1.9
20. 060.071 3.1 23. 053.033 3.5 50. 105 6.4 63. 037 7.1
20. 080.117.13 3.7 23. 060.059 3.1 50. 106 1.10 63. 038 1.11
20. 085.080 3.1 23. 060.172 3.6 50. 106 1.11 63. 038 7.1
20. 085.081 3.1 23. 070.060 3.6 50. 106 1.12 63. 042 7.3
50. 106 1.9 63. 043 7.3
21. 010.004 3.1 25. 014.065.2 3.2 50. 106 6.4 63. 044 7.4
21. 012.115 3.2 25. 018.060 3.3 50. 107 1.10 63. 046 7.2
21. 014.006 3.1 25. 025.005 3.4 50. 107 1.11 64. 001.V 4.6
21. 018.011 3.1 25. 048.056.2 3.5 50. 107 1.12 64. 002.V 4.6
21.018.118.1 3.3 50. 107 1.9 64. 003.V 4.6
21. 020.016 3.3 50. 015 1.10 50. 107 6.4 64. 004.1 4.6
21. 025.060 3.4 50. 015 1.11 50.111-119 6.6 64. 004.3 4.6
21. 030.019 3.1 50. 015 1.12 50. 123 6.2 64. 005.V 4.6
21. 032.075 3.4 50. 015 1.9 50. 124 6.2
21. 040.025 3.1 50. 015 6.4 50. 138 6.5 90. 101 4.3
21. 043.049 3.5 50. 016 1.10 50. 139 6.5 90. 102 4.3
21. 050.084.V 3.5 50. 016 1.11 50. 149 6.1 90. 103 4.3
Art. No.
Seite
page
Seite
page
Seite
page
Seite
page
Art. No. Art. No. Art. No. Art. No.
A 3
100.076.073 1.15 120. 075.075.4 1.15 154. 110.014 1.13 270. 157 1.13
100.076.083 1.15 154. 120.017 1.13 270. 157 1.15
100.090.075 1.15 123. 020.003 1.1 154. 150.021 1.13 270. 158 1.13
100.090.084 1.15 123. 025.010 1.1 154. 150.058.3 5.3 270. 158 1.15
100.110.082 1.15 123. 030.019 1.2 154. 160.024 1.13 270. 159 1.13
100.110.085 1.15 123. 040.028 1.2 154. 160.049 1.7 270. 159 1.15
100.150.086 1.15 123. 050.034 1.3 154. 177.053 1.8 270. 160 1.13
124. 030.002 1.2 155. 120x90.2 2.11 270. 160 1.15
102. 020.080.1 1.1 124. 040.006 1.2 155. 150x75.3 2.11 270. 161 1.13
102. 020.082.1 1.1 124. 050.009 1.3 155. 300x80.007 2.10 270. 161 1.15
102. 020.083.2 1.1 155. 75x40.001 2.11 270. 162 1.13
102. 020.084.2 1.1 125. 020.004 1.1 270. 162 1.15
102. 020.410.5 1.15 125. 025.007 1.1 210. 087.036.1 5.2 270. 163 1.13
102. 030.411.4 1.15 125. 030.010 1.2 210. 087.037.1 5.2 270. 164 1.13
102. 040.357 1.3 125. 040.013 1.2 211. 150.001.3 5.3 270. 165 1.13
102. 040.412.5 1.15 125. 050.017 1.3 270. 166 1.13
102. 050.413.5 1.15 231. 05.026.12 4.5 270. 167 1.13
102. 060.303 1.9 130. 100x32.42.1 2.3 231. 06.011.12 4.5 270. 168 1.13
102. 070.234 1.10 130. 400x80.106.4 2.11 231. 08.012.12 4.5 270. 169 1.13
102. 070.296.3 1.4 130. 50x20.102.1 2.3 231. 5,5x4.015.2 4.4 270. 170 1.13
102. 080.304 1.9 130. 60x20.040.1 2.3 231. 10,5x7,5.001.12 4.4 270. 171 1.13
102. 095.182.4 1.5 130. 60x38.091 2.2 231. 10,5x7,5.002.12 4.4 270. 172 1.13
102. 095.305 1.11 132. 100x35.26 2.1 231. 10.013.12 4.5 270. 173 1.13
102. 100.100.4 1.6 132. 45x15.020 2.1 231. 10x10.023.12 4.5 270. 174 1.13
102. 100.269 1.12 132. 50x30.030.13 2.2 231. 10x6.006.12 4.5 270. 179 1.10
102. 135.335.3 1.7 132. 60x20.022 2.1 231. 12.014.12 4.5 270. 180 1.12
102. 160.380.4 4.1 132. 75x25.023 2.1 231. 14x8x2.009.12 4.5 270. 191 1.11
102. 200.350 1.8 132. 85x28.024 2.1 231. 17x10.025.12 4.4 270. 191 1.12
102. 350.353.4 1.8 138. 45x15.003 2.1 231. 20x10.007.12 4.5 270. 191 1.9
138. 75x25.004 2.1 231. 20x10.027.12 4.5 270. 199 6.7
103. 075.025.5 1.4 231. 20x15.004.12 4.5 270. 201 6.7
104. 080.091 1.5 150. 030.031 1.14 231. 25x10.028.12 4.5 270. 202 6.7
104. 098.011 1.6 150. 050.032 1.14 231. 23x11x5.010.12 4.5 270. 224 1.13
104. 098.029.4 1.5 150. 075.033 1.14 231. 25x20.008.12 4.5 270. 259 1.13
104. 098.079.3 1.5 150. 100.034 1.14 231. 26,5x15.003.12 4.4 270. 261 1.13
104. 110.080.3 1.6 150. 112.021.1 1.7 231. 180x600.024.12 4.5 270. 262 1.13
104. 142.077.1 1.7 150. 112.022.1 1.7 270. 263 1.13
107. 080.087 1.4 150. 150.010 1.14 231. 2000x1000.005.12 4.5 270. 263 1.15
107. 082.090.2 3.7 150. 225.018 1.14 231. 2120x920x25.017 4.5 270. 264 1.13
150. 300.023 1.14 231. 2120x920x25.018 4.5 270. 264 1.15
110. 020.028 3.1 152. 100.042 1.6 231. 2120x920x25.019 4.5 270. 265 1.13
110. 020.029 3.1 152. 110.070.13 1.6 270. 266 1.13
110. 034.054 3.1 152. 110.081 1.14 270. 034 1.15 270. 267 1.13
110. 034.055 3.1 152. 150.020 1.14 270. 050 6.8 270. 268 1.13
110. 053.082 3.1 152. 200.026 1.14 270. 072 6.8 270. 271 1.13
110. 053.083 3.1 152. 250.030 1.14 270. 073 6.8 270. 272 1.13
110. 075.092 3.1 152. 288.049 1.8 270. 075 6.8 270. 274 1.15
110. 075.093 3.1 152. 300.036 1.14 270. 087 1.15 270. 275 1.15
110. 096.101 3.1 152. 350.110 1.14 270. 097 2.1 270. 284 1.13
110. 096.102 3.1 270. 098 2.1 270. 285 1.13
154. 047.059.3 1.3 270. 100 1.5 270. 285 1.15
112. 020.030 3.1 154. 049.068.1 1.3 270. 129 1.13 270. 286 1.13
112. 020.032 1.1 154. 065.002 1.13 270. 130 1.13 270. 286 1.15
112. 034.058 3.1 154. 065.003 1.15 270. 149 1.13 270. 311 1.15
112. 087.089.3 1.5 154. 070.062.1 1.4 270. 150 1.13 270. 312 1.15
154. 080.067.3 1.4 270. 151 1.13 270. 313 1.15
120. 075.063.4 1.15 154. 085.008 1.13 270. 156 1.13 270. 319 1.15
120. 075.074.4 1.15 154. 090.010 1.13 270. 156 1.15 270. 380 4.1
Nutzen Sie dieses Formular bitteals Kopiervorlage
Veuillez utiliser ce formulairecomme copie
FIPA est prêt à réaliser gratuitement des essais de maniement si vous mettez à disposition des échantillons de pièces à transporter. Vous pouvez ègalement demander des échantillons pour vos propres essais.
A4
Please copy this questionnaire and keep it for future use
QuestionnaireF 100
QuestionnaireF 100
FragebogenF 100
Nennen Sie uns Ihren Einsatzfall:Please quote for following application:Veuillez-nous faire part de votre avis:
Welche Teile transportieren / handhaben Sie?What kind of parts you are handling?Quel type de pièces transportez-vous / manipoulez-vous?
1
2
Vakuumanlage / Vacuum Unit / Installation de vide
Die Teile sind:The objects are:Les pièces sont:rund/round / rond
oval/oval / ovale
quadratisch/square / carée
rechteckig/rectangular /rectangulairegewölbt/curved / courbénicht eigenstabil/unstable /sans stabilité
Abmessungen / Gewicht:Dimensions / weight:Dimensiones/poids
LängeLength .................mmLonguer
BreiteWidth ..................mmLargeurHöhe/DickeHeight/ThicknessHauteur/Epaisseur
ØDiameter ...............mm
GewichtWeight ..................g/kgPoids
Heberichtung:Motion direction:Direction(s) de levage:
glatt/ smooth/ lisse
rauh/rough/rugueuse
strukturiert / textured/structurée
wellig/rippled/ondulée
ölig /oily / graisse
gezundert / scaledirrégulière
naß / wet / humide
trocken / dry / sèche
Oberfläche:Surface:Surface:
Temperatur:Temperature:Temperture:
Vakuumsauger bereits im Einsatz? / Suction cups in use? /Ventouses déjà utilisées?
Unser Bedarf an Vakuumsaugern pro Jahr:Annual requirement of suction cups:Besoins annuels en ventouses:
kurzzeitig / briefly/Temp. sur courte durée ................ °C
Dauertemperatur /continuouslyTemp. continue bis / to / à :
+ ............... °C
- ............... °C
nein/no/non ja, folgende(r) Typ(en)yes, following type(s) .........................................oui, le(s) type(s) suivant(s)
ca./approx./env. ........................ Stück/pieces/pièces
FIPA ist gerne bereit, kostenlos Handlingversuche durchzuführen, wenn Sie Muster der zu transportierenden Teile zur Verfügung stellen. Sie können jedoch auch Mustersauger für Eigenversuche anfordern.
FIPA will gladly perform handling tests without charge on samples of the objects to be carried. Alternatively, please feel free to request sample cups for your own tests.
Verfahrweg / Distance: .....................................
VakuumerzeugungVacuum generatingGénération de vide
vorhanden / existing /disponible
nicht vorhanden / non existing/non disponible
Vakuum-Pumpe/Vacuum pump/Pompe à vide
Vakuum-Ejektor/Vacuum ejectorEjecteur à vide
Leistungsdaten / Power capacityPuissance
Vakuumsauger / Vacuum suction cups / Ventouses
...................mm
Positioniergenauigkeit: /Positioning accuracy: /Précision du positionnement:
...................................
..............................................
.............................
Beschleunigung: /Acceleration: /Accélération:
Umwelteinflüsse/Environment/Environnement
Einsatzgebiet/Use/Utilisationinnen/indoors/intérieur
außen/outdoors/extérieurporös/porous/poreuse
........................................................
3
3a
4 5 6 7
8
15
9 10
11
12
13
14
Material/material:
..............................
6/20
05Distance:
Temps d'aspiration:
Taktzeit/Cycle time/Cycle: ................................
Ansaugzeit / Suck up time: ..............................
Von /
From/De
Firma / Company / Socièté Straße / Street / Rue
Name / Name / Nom PLZ-Ort, Land / Postal code, city, country / Code postal, Lieu
Abteilung / Dept. / Service Telefon / Phone / Téléphone Fax
FIPA GMBH FAX: 089 / 96 24 89 - 11International : +49 / 89 96 24 89 -11
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30
www.fipa-online.comFax +49/(0)89 / 96 24 89-11
Tel. +49/(0)89 / 96 24 89 -0
e-mail: [email protected]
(falls nicht vorhanden: siehe Fragebogen F 150 auf unserer Website )www.fipa-online.com
(si non disponible: voir Questionnaire F 150 su notre Website )www.fipa-online.com(if not existing: see Questionnaire F 150 on our Website )www.fipa-online.com
Fragebogen für Abstapelanlagen Questionaire for stacking systems
Questionaire pour des installations
FIPA GMBH®
VAKUUM-TECHN IK
D-85737 Ismaning
Freisinger Str. 30 Telefax 089 / 96 24 89-11
Telefon 089 / 96 24 89 -0
www.fipa-online.com e-mail: [email protected]
A 5
6/20
05
Zykluszeit / cycle time / temps de cycle
Gewünschte Funktion / desired function / fonction souhaitee
Bemerkungen / remarks / observations
Von /
From/De
Firma / Company / Socièté Straße / Street / Rue
Name / Name / Nom PLZ-Ort, Land / Postal code, city, country / Code postal, Lieu
Abteilung / Dept. / Service Telefon / Phone / Téléphone Fax
FIPA GMBH FAX: 089 / 96 24 89 - 11International : +49 / 89 96 24 89 -11
Nutzen Sie dieses Formular bitteals Kopiervorlage
Veuillez utiliser ce formulairecomme copie
Please copy this questionnaire and keep it for future use
A
B
CD
E
F
G
A
B
C
D
E
F
G
H
JGewicht max.Weight max.Poids max.
J
kg
Leisten zwischen jeder Lage?Battens between layers?Baguettes entre chaque couche?
Angaben zum HolzstapelStack dataDonnées des produits
ja/yes oui
nein/no non
Technische DatenSpecificationsSpecifications
FlächensauggreiferLarge-area suction pad
Referenzlinie mittig?Centre reference line?Paquet centré?
Referenzlinie bündig?Flush reference line?Paquet référencé en bout?
Unterschiedliche Länge?Different length?Longueurs différentes?
Gleiche Länge? Same length?Même longeurs?
Unterschiedliche Breite?Different width?Largeurs différentes
Gleiche Breite? Same width?Même largeurs?
1
1
2
3
4
5
66
7
7
(FxExJ)
® FIPA GMBHVAKUUM-TECHN IK
Vakuum-Sauger- Vakuum-Sauger,- Saugerträger- Anschlußteile- Vakuum-Pinzetten/Pipetten
Vakuum-Komponenten- Ejektoren- Ventile- Schalldämpfer- Verschraubungen- Schläuche
Vakuum-Komponenten- Kontroll- und Steuerungs- instrumente- Vakuum-Pumpen- Vakuumförderer- Hubzylinder- Vakuum-Zentralen
VAKUUM-TECHNIK VACUUM TECHNOLOGY
GREIFERSYSTEME
MASCHINENAUSRÜSTUNGEN PARTS FOR MACHINES
ROBOTIK EOAT
- Profile und Verbindungs- elemente- Klemmelemente- Greifzangen, Angussgreifzangen- Saugfinger- Pneumatische Innengreifer
Greifer-System für Entnahmeroboter
Das FIPA - Erfolgsprogramm
The successfull FIPA Program
Soufflets vulcanisés
- Vaste programme standard- Versions spéciales sur demande
Flexibles articulés pour passage de froid.- stables- en trois tailles différentes- disponibles aussi avec base magnétique
Ventouses à vide- Ventouses à vide- Porte-ventouses- Inserts- Pincettes / à videPipettes
- Profils et éléments de raccords- Pinces de préhension- Doigts de préhension - Préhenseurs pneumatìques interieur
Composants du vide- Venturis- Soupapes- Silencieux- Raccords- Flexibles
Eléments de pré-hension en kits
TECHNIQUE DU VIDE
ProgrammeFIPA à succès
Vacuum Suction Cups- Vacuum suction cups
- Supports for suction cups
- Fittings
- Vacuum squeezers/pipettes
Vacuum Components- Control devices
- Vacuum pumps
- Vacuum conveyors
- Lifting cylinders
- Vacuum units
Composants du vide- instruments de contrôle/ de commande- Pompes à vide- Convoyeurs à vide- Vérins- Centrales de vide
Vakuum-Components- Ejectors
- Valves
- Silencers
- Fittings
- Tubes
Kühlmittel-Gelenkschläuche- positionsstabil- in drei Durchlaßgrößen- auch mit Magnetfuß
Vulkanisierte Bälgein jeder Form und Größe- umfassendes Standard- programm- Sonderanfertigungen nach Kundenwunsch
- Extensive line of standardized
products
- Custom-made items to your
specifications
- Profiles and Connectors
- Clamping Elements
- Grippers, Sprue Grippers
- Suction Fingers
- Inflating Air Hands
RoboticEnd-of-Arm Tooling
Flexible Coolant Hoses- Positionally rigid
- Three different sizes
- Also available with
magnetic base
Moulded Bellowsany shape and size
ELÉMENTS DE PRÉHENSION
PRODUITS POUR MACHINES OUTILS
Freisinger Str. 30 Telefax +49/(0)89 / 96 24 89-11
Telefon +49/(0)89 / 96 24 89 -0
www.fipa-online.com e-mai l : in fo@f ipa-onl ine.com
D-85737 Ismaning