vacuum evaporation equipment & supplies

VACUUM EVAPORATION EQUIPMENT & SUPPLIES

TED PELLA, INC.Microscopy Products for Science and Industry

www.tedpella.com [email protected] 800-237-3526

OC® (Oxygen Compatible)Pastes, Greases & Sealers

Foreline Traps & Exhaust Filters

Heavy Duty & Compact Rotary Vane Pumps

Apiezon® Greases, Sealing Compounds & Waxes

Vacuum Pump Oils, Fluids & Cleaning Supplies

NW/KF Wing Nut Clamps, Connectors & Centering Rings

Tungsten Boats, Baskets & Filaments

PELCO® NW/KF Ball Valves, Hoses & Adapters

Dry Scroll Vacuum Pumps

Vacuum Pumps, Grease, Oil, Hose, Fittings, Valves, Filaments, Boats & Wire

©Ted Pella, Inc. 06-17-2015, Printed in U.S.A.

2 www.tedpella.com TED PELLA, INC. 800-237-3526

VACUUM SUPPLIESDual Stage, Rotary Vane, Vacuum Pumps

RVP SERIES DUAL STAGE, ROTARY VANE, VACUUM PUMPS

The RVP Series line of quality rotary vane pumps will meet your demands for high pumping speed combined with high ultimate vacuum. These dual stage rotary vane pumps are reliable, efficient and competitively priced. High quality engineering has resulted in corrosive-resistant pumps with a compact design coupled to quiet and low vibration operation.

These pumps are ideally suited for many applications in labs and small production systems such as analytical instruments, electron microscopes, sputter coaters, carbon coaters, vacuum deposition systems, freeze drying, vacuum ovens and furnaces, or as backing pumps for high vacuum turbo or diffusion pumps.

Model RVP 100-3.5 RVP 200-7.0 RVP 400-14

Product Number 92080 92081 92080 / 92082-220

Pumping Speed @60Hz 100 ltr/min, 3.5cfm, 6m3/hr 200 ltr/min, 7.1cfm, 12m3/hr 400 ltr/min, 14.1cfm, 24m3/hr

Noise Level, dB 50 50 52

Ultimate Pressure ≤1 x 10-3 Torr (1.3 x 10-1 Pa)

Ultimate Pressure w/gas ballast 5 x 10-2 Torr (6.7 Pa)

Intake and Exhaust ConnectionTee/Handle: NW25

Hose Nipple: ø12, ø16, ø26 OD for NW25 / ø36 OD for NW40PT Nipple: 1/4”, 3/8”, 1/2”, 1” for NW25

Oil Capacity 500cc 600cc 1500cc

Oil Type PELCO® Ultra 19 PELCO® Ultra 19 PELCO® Ultra 19

Full Load Power (kw) 0.4 (0.5HP) 0.75 (1HP)

Power Rating, kw 115VAC 1ø 50/60Hz 230VAC 1ø 50/60Hz

230/380VAC 1ø 50/60Hz

Weight, net 23 kg (51 lb) 23 kg (51 lb) >35 kg (77 lb)

Ambient Operating Temperature 7º to 40º C (45º to 104º F)

Model 100-3.5(92080)

Model 200-7.0(92081)

Model 400-14(92082 / 92082-220)

Features Overview

■ 6m³, 12m³ and 24m³ pumping capacity

■ Extremely quiet operation

■ Virtually vibration free

■ Compact design

■ Corrosion resistant

■ Anti suck-back design

■ Multiple voltage motors

SPECIFICATIONS

92080 Rotary Vane Pump RVP 100-3.5, 6m³/hr, 115volts, 50/60Hz..........................................................................................................................................each 92080-220 Rotary Vane Pump RVP 100-3.5, 6m³/hr, 230volts, 50/60Hz..........................................................................................................................................each92081 Rotary Vane Pump RVP 200-7.1, 12m³/hr, 115volts, 50/60Hz........................................................................................................................................each92081-220 Rotary Vane Pump RVP 200-7.1, 12m³/hr, 230volts, 50/60Hz........................................................................................................................................each92092 Rotary Vane Pump RVP 400-14.1, 24m³/hr, 115volts, 50/60Hz......................................................................................................................................each92092-220 Rotary Vane Pump RVP 400-14.1, 24m³/hr, 230/380volts, 50/60Hz...............................................................................................................................each12938-3 Polypropylene Funnels, set of three with 2, 4 and 8 oz.................................................................................................................................................each808-16 Cotton Shop Cleaning Towels, Blue, 14” x 14”.............................................................................................................................................................10/pk

800-237-3526 TED PELLA, INC. www.tedpella.com 3

VACUUM EQUIPMENTVRP Series Heavy Duty Rotary Vacuum Pumps

Features Overview

■ 4m³, 8m³ and 16m³ pumping capacity

■ Reliable, robust pumps

■ Quiet operation

■ Low vibration

■ Anti suck-back design

■ Excellent value

VRP SERIES HEAVY DUTY ROTARY VACUUM PUMPS

The VRP series line of dual stage rotary vacuum pumps combine high perfor-mance with excellent value. These reliable, heavy duty vacuum pumps include an integrated cylinder structure design, an innovative forced oil circulation sys-tem, automatic oil anti suck-back valve and adjustable gas ballast. Suitable for a wide variety of application in research, science and industry. These pumps can be used for analytical systems, backing pumps, vacuum ovens, crystal vacuum coating, sputtering systems, plasma cleaning, freeze drying, electron microscopes and backing pumps for turbo pumps, diffusion pumps and roots pumps. Due to excellent build quality, the VRP pumps exhibit low vibration and quiet operation. Available with 4, 8 and 16m³/hr pumping capacity.

Model VRP-4 VRP-8 VRP-16

Product Number 92074 / 92074-230 92078 / 92078-230 92079 / 92079-230

Pumping Speed @60Hz 80 ltr/min, 2.8cfm, 4.8m3/hr 160 ltr/min, 5.6cfm, 12m3/hr 320 ltr/min, 11.3cfm, 24m3/hr

Pumping Speed @50Hz 66.7 ltr/min, 2.35cfm, 4.1m3/hr 133.3 ltr/min, 4.7cfm, 10m3/hr 266.7 ltr/min, 9.4cfm, 20m3/hr

Ultimate Part. Pressure 5 x 10-4 mbar 5 x 10-4 mbar 4 x 10-4 mbar

Ultimate Total Pressure 5 x 10-3 mbar 5 x 10-3 mbar 4 x 10-3 mbar

Intake and Exhaust Connection KF16 / KF16 KF25 / KF25 KF25 / KF25

Oil Type PELCO® Ultra 19 PELCO® Ultra 19 PELCO® Ultra 19

Oil Capacity 0.6 - 1.0 liters 0.6 - 1.0 liters 0.9 - 1.5 liters

Power Supply Single Phase 115V or 230V Single Phase 115V or 230V Single Phase 115V or 230V

Power Rating 0.40kW 0.40kW 0.75kW

Motor Speed @ 60Hz 1720 rpm 1720 rpm 1720 rpm


Ambient Operating Temperature 5º to 40ºC (41º to 104ºF) 5º to 40ºC (41º to 104ºF) 5º to 40ºC (41º to 104ºF)

Noise Level ≤56dB ≤56dB ≤58dB

Weight 19kg (41.8lb) 21kg (46.2lb) 30kg (66lb)

Dimensions (L x W x H)460 x 144 x 230mm (18.1 x 5.7 x 9.1”)

460 x 144 x 230mm (18.1 x 5.7 x 9.1”)

520 x 188 x 272mm (20.5 x 7.4 x 10.7”)

Model VRP-4(92074 / 92074-230)

Model VRP-8(92078 / 92078-230)

Model VRP-16(92079 / 92079-230)

92074 VRP-4 Dual Stage Rotary Vacuum , 4.8 m³/h, 115V ........................................................................................................................................ each92074-230 VRP-4 Dual Stage Rotary Vacuum , 4.0 m³/h, 230V ........................................................................................................................................ each92078 VRP-8 Dual Stage Rotary Vacuum , 9.6 m³/h, 115V ........................................................................................................................................ each92078-230 VRP-8 Dual Stage Rotary Vacuum , 8.0 m³/h, 230V ........................................................................................................................................ each92079 VRP-16 Dual Stage Rotary Vacuum , 19.2 m³/h, 115V .................................................................................................................................... each92079-230 VRP-16 Dual Stage Rotary Vacuum , 16 m³/h, 230V ....................................................................................................................................... each

SPECIFICATIONS


VALUE VRI SERIES COMPACT ROTARY VACUUM PUMPS

The Value VRI series dual stage rotary vacuum pumps are compact, lightweight, and cost efficient. Ideally suited for a variety of light duty laboratory, research and production vacuum applications. They are equipped with an active solenoid valve to prevent oil suck-back. Available with pumping speeds of 2, 4 or 8m3/hr with an ultimate pressure of 10-2 mbar. Applications include laboratory vacuum equip-ment, air-out systems, vacuum desiccator, backing pump, coating systems, small freeze drying/vacuum food packaging and vacuum mold-ing systems. Excellent specifications, good quality with a low cost. Low weight for easy handling.

Model VRI-2(92092 / 92092-230)

Model VRI-4(92089 / 92089-230)

Model VRI-8(92098 / 92098-230)

SPECIFICATIONS

DRY SCROLL VACUUM PUMPS

The oil-free technology of dry scroll pumps eliminates the possibility of oil contamination in the vacuum system or in the environment around the rotary pump. No need to check oil, change oil and/or oil mist filters thus decreasing operation costs. Compared to diaphragm pumps, dry scroll pumps provide a vacuum around a magnitude providing much better compatibility with turbo pumps. Both the IDP-3 and SH-110 are affordable, compact high-performance pumps, which are relatively quiet and very suitable for labo-ratory type applications.

See next page for product details.SH-110

(92086/92086-220)IDP-3

(92085/92085-220)

Model VRI-2 VRI-4 VRI-8

Product Number 92092 / 92092-230 92089 / 92089-230 92098 / 92098-230

Pumping Speed @60Hz 35 ltr/min, 1.25cfm, 2.1m3/hr 72 ltr/min, 2.5cfm, 4.3m3/hr 143 ltr/min, 5.0cfm, 8.6m3/hr

Pumping Speed @50Hz 30 ltr/min, 1.05cfm, 1.8m3/hr 60 ltr/min, 2.1cfm, 3.6m3/hr 120 ltr/min, 4.2cfm, 7.2m3/hr

Ultimate Part. Pressure 1 x 10-3 mbar 1 x 10-3 mbar 1 x 10-3 mbar

Ultimate Total Pressure 1 x 10-2 mbar 1 x 10-2 mbar 1 x 10-2 mbar

Intake and Exhaust Connection KF16 / KF16 KF16 / KF16 KF16 / KF16

Oil Type PELCO® Ultra 19 (Prod. No. 891-31) PELCO® Ultra 19 (Prod. No. 891-31) PELCO® Ultra 19 (Prod. No. 891-31)

Oil Capacity 0.2 liters 0.3 liters 0.5 liters

Power Supply Single Phase 115V or 230V Single Phase 115V or 230V Single Phase 115V or 230V

Power Rating 0.25kW 0.37kW 0.55kW



Ambient Operating Temperature 5º to 40ºC (41º to 104ºF) 5º to 40ºC (41º to 104ºF) 5º to 40ºC (41º to 104ºF)

Noise Level ≤62dB ≤62dB ≤65dB

Weight 9kg (19.8lb) 11kg (24.2lb) 17kg (37.4lb)

Dimensions (L x W x H)318 x 124 x 234mm (12.5 x 4.9 x 9.2”)

337 x 138 x 244mm (13.3 x 5.4 x 9.6”)

395 x 145 x 257mm (15.6 x 5.7 x 10.1”)

92092 VRI-2 Dual Stage Rotary Vacuum , 2.1 m³/h, 115V ......................................................................................................................................... each92092-230 VRI-2 Dual Stage Rotary Vacuum , 1.8 m³/h, 230V ......................................................................................................................................... each92089 VRI-4 Dual Stage Rotary Vacuum , 4.3 m³/h, 115V ......................................................................................................................................... each92089-230 VRI-4 Dual Stage Rotary Vacuum , 3.6 m³/h, 230V ......................................................................................................................................... each92098 VRI-8 Dual Stage Rotary Vacuum , 8.6 m³/h, 115V ......................................................................................................................................... each92098-230 VRI-8 Dual Stage Rotary Vacuum , 7.2 m³/h, 230V ......................................................................................................................................... each

VACUUM EQUIPMENTValue Series VRI Compact Rotary Pumps


IDP-3 DRY SCROLL VACUUM PUMP

The IDP-3 Dry Scroll Pump is an innovative, compact, high-performance, oil-free vacuum pump that is suitable for a wide variety of applica-tions. It is one of the smallest scroll pumps made for general vacuum applications and can be easily integrated in existing systems. With a pumping speed of 60 ltr/min (3.6m3/hr, 2.1 cfm), low base pressure of 250 millitor (3.3 x 10-1mbar) and a weight of only 21 lb (9.5kg), it is a high performance pump with impressive specifications. The IDP-3 can be used to back small turbo pumps with drag stages or other vacuum lab equipment. Inlet connection is a standard NW16 KF flange. Ideal to upgrade system with a small oil-filled rotary pump to dry pumping systems (such as the Cressington 208HR). Available in 115 and 230 VAC versions.

92085 IDP-3 Dry Scroll Pump 60ltr/min, 3.6m3/hr, 1.8cfm, 115VAC/60Hz ............................................................................................................... each92085-220 IDP-3 Dry Scroll Pump 60ltr/min, 3.6m3/hr, 1.8cfm, 230VAC/60Hz ............................................................................................................... each92085-30 Tip Seal Kit for IDP-3 Pump ............................................................................................................................................................................... each

SH-110 DRY SCROLL VACUUM PUMP

The SH-110 is a dry, hermetic scroll pump that combines a high pumping speed with a low ultimate vacuum in an impressive package. The SH-110 has a universal motor for 100-230 VAC for easy installation in existing systems. Pumping speed is 110 ltr/min (6.6m3/hr, 4 cfm) with an ultimate pressure of 50 millitor (6.6 x 10-2 mbar) and can be used to back up turbo pumps compatible with that pumping speed. Inlet connection is standard NW25 KF flange.

92086 SH-100 Dry Scroll Vacuum Pump 110ltr/min, 6.6m3/hr, 4cfm, 60Hz ............................................................................................................ each92086-30 Tip Seal Kit for SH-100 Pump ........................................................................................................................................................................... each

Model IDP-3 SH-110

Product Number 92085 / 92085-220 92086

Peak Pumping Speed (60Hz) 60L/m, 3.6m3/hr, 2.1cfm 110L/m, 6.6m3/hr, 4cfm

Peak Pumping Speed (50Hz) 50L/m, 3.0m3/hr, 1.8cfm 90L/m, 5.4m3/hr, 3.3cfm

Ultimate Pressure 2.5 x 10-1 torr (3.3 x 10-1 mbar) 5.0 x 10-2 torr (6.6 x 10-2 mbar)

Maximum Inlet Pressure 1 atmosphere (0 psig) 1 atmosphere (0 psig)

Maximum Outlet Pressure 1.4 atmosphere (6.5 psig) 1.5 atmosphere (7.5 psig)

Inlet Connection NW16 KF flange NW25 KF flange

Exhaust Connection1⁄4” female nat’l pipe thread (10mm hose barb provided)

1⁄4” female nat’l pipe thread

Exhaust Connection Adapter NW16 KF adapter provided NW16 KF adapter provided

Gas Ballast Connection 1/8” female nat’l pipe thread 1/8” female nat’l pipe thread

Ambient Operation Temperature 5 to 45°C (41 to 113°F) 5 to 45°C (41 to 113°F)

Storage Temperature -20 to 60°C (-4 to 140°F) -20 to 60°C (-4 to 140°F)

Motor Rating 0.16 horsepower (0.12 kW) 0.25 horsepower (0.19 kW)

Supply Power 1 phase, 50-60 Hz, 100-115/200-240 VAC 1 phase, 50-60 Hz, 100-115/200-230 VAC

Motor Thermal Protection Automatic Automatic

Rotation Speed 3200 RPM at 60 Hz / 2600 RPM at 50 Hz 1725 RPM at 60 Hz / 1425 RPM at 50 Hz

Cooling Air-cooled Air-cooled

Weight 9.5 kg (21 lb) 19.5 kg (43 lb)

Size384 x 140 x 181mm (LxWxH)15.12” x 5.51 x 7.13”

384 x 258 x 258mm (LxWxH)15.12” x 10.16 x 10.16”

Shipping Weight 10.5 kg (23 lb) 19.5 kg (43 lb)

RestrictionsNo corrosive, explosive, or particulate-forming gases

No corrosive, explosive, or particulate-forming gases

Leak Rate (exhaust sealed) <1 x 10-6 std-cc/sec helium <1 x 10-7 std-cc/sec helium

Compliances Conforms with CE, CSA, CSA/CUS, Semi S2-703, and RoHS

Conforms with CE, CSA, and Semi S2-2000

SPECIFICATIONS

VACUUM EQUIPMENTDry Scroll Vacuum Pumps


EXHAUST FILTER FOR VACUUM ROTARY VANE PUMPS, 1/2” NPTMist Eliminators

Permits discharge into clean work areas. Return collected oil to sump or discard. Rugged construction, simple installation. For non-hazardous, non-corrosive applica-

tions. For RVP 100-3.5, VRP-8, Edwards RV5 or similar. Connection: 1/2” NPT.

92060 Exhaust Filter, Max Flow Rate 3cfm, 1/2” NPT (e.g., Edwards E2M2 or RV5 #92033/92033-220), Including Adapter. 1/2” Female NPT to 3/4” BSPT with 1/4” NPT Plug .......................................................... each92061 Exhaust Filter, Max Flow Rate 3cfm (e.g., RVP 100-3.5 #92080; Edwards E2M2 or RV5 #92033/92033-220), without adapter, 1/2” NPT thread .................................. each

FORELINE TRAPS

Highly recommended to pre-vent oil backstreaming from rotary vane pumps. Keeps your vacuum system clean in appli-cations where pumps are run-ning constantly such as mass spectrometer, electron micro-scope, and vacuum drying sys-tems. Protect vacuum gauges

when mounted in front of the gauges. Includes a 150ml Activated Alumina charge (renew the charge every 3 months with Prod. No. 92090-50). These compact, reliable and efficient foreline traps offer maximum mounting flexibility.

Features Overview

■ Orientation in any direction - spring-loaded sorbent basket

■ Positive creep-proof design with O-ring seal

■ Suitable for pumps up to 34m3/hr, 20cfm, 550 ltr/min

■ Leak tested to better than 2 x 10-9 scc/sec

■ Available in both right angle and inline design

■ Available with both NW/KF 16 and NW/KF 25 flanges

■ No tools needed for easy sorbent replacement

■ Aluminum body and sorbent basket, 316 SS spring

92090-10 Inline Style Foreline Trap NW16 ..................................... each92090-20 Inline Style Foreline Trap NW25 ..................................... each92090-30 Right Angle Foreline Trap NW16 .................................... each92090-40 Right Angle Foreline Trap NW25 .................................... each

PELCO® ACTIVATED ALUMINA SORBENT FOR FORELINE TRAPS

The activated alumina sorbent is used in foreline traps to prevent backstreaming from rotary pumps or to shield vacuum gauges from contamination. PELCO® Activated Alumina Sorbent can be used in foreline traps from VRL, BOC-Edwards, Alcatel/Adixen, Varian, Leybold, Sargent-Welch, Ulvac and other brands. The

small pores (2-50nm) and the non-uniform pore distribution in the PELCO® Activated Alumina Sorbent provide the large surface area of 350m2/gram.

With this large internal surface area, the activated alumina sorbent attracts and holds gas molecules to which it is exposed. PELCO® Activated Alumina Sorbent is activated at 350°C (662°F) to less than 1% water and it is capable of holding 43% water (by weight) or in the foreline trap application, oil. The relatively uniform 1/4” diameter size makes it ideally suited for charging perforated mesh canisters as used in foreline traps.

Also recommended for drying gases and refrigerants and for appli-cations where extremely low dew points are desirable.

Packed in a 450ml metal can with sealed lid.

92090-50 PELCO® Activated Alumina Sorbent, 450ml .................. each

EXHAUST FILTER ADAPTER

NW/KF 25 to 1/2” NPT, stainless steel. For use with pump model 100-3.5 (Product No. 92080).

92466-25 Exhaust Filter Adapter, NW/KF 25 to 1/2” NPT ............. each

COMPACT OIL MIST ELIMINATOR

Compact Oil Mist Eliminator with KF25 connection and 1/8” drain plug. Max flow rate 10 CFM (5 ltr/sec or 16m³/hr (suitable for #92078, 92879, 92080, 92081, 92082, 92035 and 92035-220). Baked enamel steel housing, Ø89 x 127mm H (Ø3.5” x 5” H). Use replacement filter #92066-10.

92066 Compact Oil Mist Eliminator and Cartridge, NW/KF 25 ..each92066-10 Replacement Filter Cartridge for Oil Mist Eliminator ......each

VACUUM SUPPLIESForeline Traps; Exhaust Filters; PELCO® Activated Alumina Sorbent; Compact Oil Mist Eliminator

EXHAUST FILTER FOR SMALL ROTARY VACUUM PUMPS, 1/4” NPTMist Eliminators

Filter for removing oil mist from vacuum pump exhaust in Prod. No. 7010, 7010-220, 91020 and 91020-230 Rotary Pumps or other rotary vane pumps with NW/KF 16 output flange, such as the Pfeiffer Duo

2.5 and Uno 5.0 vacuum pumps. Creates a cleaner work environ-ment for operators and surrounding equipment. Connection: 1/4” NPT thread. With 92465-16, fits VRI-2, VRI-4 & VRI-8.

9609 Exhaust Filter for Rotary Pumps ..................................... each92465-16 NW/KF 16 Adaptor to 1/4” Female NPT, 304 Stainless Steel, A=16mm, B=19mm ............................................... each


ULTRAGRADE 19 VACUUM PUMP OIL

Mineral oil derivative ideally suited for mechani-cal rotary vacuum pumps. Light end fractions are removed through molecular distillation resulting in lower vapor pressures and reduced backstreaming compared to undistilled refinery products. Offers reduced maintenance costs, longer fluid life and cooler running. Suitable for single and dual rotary vane pumps from VRL, Edwards, Alcatel, Adixen, Varian, Agilent, Leybold, Oerliken, Sargent-Welch, Ulvac, Ilmvac and other brands. Indefinite shelf life when stored in unopened container at ambient tem-peratures out of direct sunlight.

891-35 Ultragrade 19 Rotary Pump Oil ............................... 1 liter891-36 Ultragrade 19 Rotary Pump Oil ..............................4 liters

TWO-STAGE VACUUM PUMP EXHAUST FILTER KIT

For rotary vacuum pumps it is recom-mended that they should be vented out-side the room or to a laboratory exhaust hood to prevent indoor air contamination. This two-stage vacuum pump exhaust filter kit enables venting rotary pumps in rooms where an outside line is either not practical or possible. The two stage filters contain a replaceable oil mist eliminator element to trap vacuum oil and a replace-able activated charcoal element for the lighter hydrocarbon fractions.

Features Overview

■ Provides a safe lab environment

■ Purifies vacuum exhaust gases

■ Separate replaceable elements for oil mist and lighter fractions

■ Only 6¼” tall with standard NW/KF connection

■ Low cost solution

It is recommended that both filters are replaced on a regular basis. For appli-cations such as electron microscopes and mass spectrometers, the oil mist filter (Product No. 92066-10) needs to be replaced every 4 – 6 months and the final activated charcoal filter (Product No. 92068-20) once a month. Rated for vacuum pumps up to 10cfm (5ltr/sec or 16m3/hr). Suitable for #92081, 92082, 92035, 92035-220.

92068 Two-Stage Vacuum Pump Exhaust Filter Kit, NW/KF 25 .......................................................................... each92068-20 Replacement Activated Charcoal Filter Element for #92068 ......................................................................... each92066-10 Replacement Oil Mist Eliminator Cartridge for #92068 ......................................................................... each

PELCO® ULTRA 19 VACUUM PUMP OIL

Premium quality vacuum pump oil for single and dual stage rotary pumps. Extra refined for increased lubri-cation, enhanced sealing and reduced backstreaming. Excellent oil for rotary back-ing pumps on high vacuum systems, electron micro-scopes and mass spectrom-eters. PELCO® Ultra 19 vac-uum pump oil is suitable for our VRP, RVP and VRI rotary vane pumps. Compatible

with rotary vane pumps from Edwards, Adixen, Alcatel, Varian, Agilent, Leybold, Oerlikon, Ulvac, Sargent-Welch, Ilmvac and other brands. Fully comparable with Edwards Ultragrade 19 and Inland 19 rotary pump oil. Great cost savings compared to more expen-sive brand products. Indefinite shelf life when stored in unopened container at ambient temperatures out of direct sunlight.

891-31 PELCO® Ultra 19 Vacuum Pump Oil ..............................1 liter891-34 PELCO® Ultra 19 Vacuum Pump Oil ......................... 1 gallon

PFEIFFER P3 VACUUM PUMP OIL

Clear, monograde oil that has the correct viscos-ity for Pfeiffer rotary vacuum pumps, excellent sealing and lubrication properties, low vapor pressure and reduced back streaming. Used also for Product No. 7010 and 7010-220 rotary pumps. Indefinite shelf life when stored in unopened container at ambient temperatures out of direct sunlight.

891-38 Pfeiffer P3 Vacuum Pump Oil .........................................1 liter891-25 Pfeiffer P3 Vacuum Pump Oil .....................................20 liters

POLYPROPYLENE FUNNELS (SET OF 3)

Polypropylene funnels; useful when filling a vacuum pump with oil or draining the oil from the pumps. Lightweight and durable. Set of three with 2, 4 and 8 oz. capacity.

12938-3 Polypropylene Funnels, Set of Three (2, 4, 8 oz.) ......... set/3

COTTON SHOP CLEANING TOWELS

Heavyweight cotton shop cleaning towels are highly absorbent and economical. Preferred rags for cleaning oils

and grease or cleaning large areas. Ideal for cleaning up after oil changes on vacuum pumps, repairs or when oil drips out of the mist filter. 14% recycled cotton yarn blended with 86% new cot-ton. These blue cotton rags are pre-washed, soft, surged edges, low lint, heavyweight quality. Size is approximately 14” x 14” after washing. Sold in packs of 10.

808-16 Cotton Shop Cleaning Towels, Blue, 14” x 14” .........pkg/10

VACUUM SUPPLIESTwo-Stage Exhaust Filter Kit; PELCO® Ultra 19 Vacuum Pump Oil; Funnels & Shop Towels


3M™ NOVEC FLUX REMOVER / DEGREASER

3M™ Novec Flux Remover uses advanced solvent technology to remove a wide variety of solder flux-es used in electronics manufacturing and repair. It also has excellent degreasing properties for clean-ing O-ring seal surfaces, O-ring grooves, vacuum sealing surfaces and oils and greases from surfac-es. 3M™ Novec Flux Remover is non-flammable, non-ozone depleting and does not contain HCFCs, HFCs or HAPs. Excellent alternative for other harsh chemicals or solvents. Compatible with most met-als and alloys. 80947 3M™ Novec Flux Remover/Degreaser, 12 oz. Can ............................................. each

SANTOVAC® 5 DIFFUSION PUMP OIL

Operates efficiently, economically and safely in diffu-sion pumps in properly designed systems to produce ultra-high vacuums in the 10-10 torr range. A wide liq-uid range, low vapor pressure and balance of proper-ties make it an ideal working fluid in diffusion pumps.

Extremely low vapor pressure results in low ultimate pressures. The vapor pressure of Santovac® 5 at 25°C is 4 x 10-10 as determined by extrapolation from high-

er temperature data. Together with low backstreaming characteris-tics, 10-10 torr vacuums can be obtained in well designed systems without the use of nitrogen traps. Shelf life in sealed amber bottle 30-40 years when stored at ambient temperatures. Can be used for electronic component manufacture, laboratory, analytical, instrument and research applications. Santovac® 5 offers unusually high thermal and oxidation stability, with isoteniscope tests showing thermal stability at 465°C (870°F). Oxidation and cor-rosion tests, and field experience have shown that Santovac® 5 has little tendency to increase in viscosity during use. 891-50 Santovac® 5 Diffusion Pump Oil, 100ml ........................ each

KRYTOX® 1525 VACUUM PUMPING FLUID

Krytox® Perfluorinated Polyether (PFPE) inert vacuum pump fluid for corrosive and oxygen applications. Chemically inert pumping fluid with excellent lubrication properties. used in chemical resistant pumps as used in plasma cleaning systems.

891-42 Krytox® 1525 Vacuum Pumping Fluid, 1kg ....................each

LION S DIFFUSION PUMP OIL

Lion S diffusion pump oil is a high quality alkyl naphthalene based diffusion pump oil, espe-cially developed for applications such as elec-tron microscopes, mass spectrometers and small vacuum systems. Recommended for TEMs and SEMs made by Hitachi, JEOL and ISI/ABT/Topcon equipped with a diffusion pump. No need for lower grade substitutes, this is the original LION S diffu-sion pump oil, manufactured by the Lion Corpora-tion, Japan. It has been and is still used in diffu-sion pumps used in instruments manufactured in Japan. Lion S diffusion oil has a high resistance against oxidation and works well with small and medium size diffusion pumps.

891-55 Lion S Diffusion Pump Oil, 100ml ..................................each891-56 Lion S Diffusion Pump Oil, 1000ml ................................each

APIEZON® GREASES, SEALING COMPOUND & WAX

No silicones. Excellent general purpose vacuum grease. Fully soluble in hydro-carbon and chlorinated solvents. Shelf life, in original unopened container at ambient temperatures, is 10 years from date of manufacturing.

Apiezon® L: ultra high vacuum grease, silicone and halogen freeApiezon® M: high vacuum grease, silicone and halogen freeApiezon® N: cryogenic high vacuum grease, silicone and halogen freeApiezon® T: medium temperature vacuum grease, silicone freeApiezon® H: high temperature vacuum grease, silicone freeApiezon® AP100: ultra high vacuum lubricating grease, silicone freeApiezon® AP101: anti-seize vacuum grease, silicone freeApiezon® Q: sealing compound for leaks in lower vacuum rangeApiezon® W: wax for permanent sealed joints at room temperatures, for low to medium vacuum range

891-2 Apiezon® Type L, 25g Tube ...................................................................each891-104 Apiezon® Type L, 50g Tube ...................................................................each891-144 Apiezon® Type L, 4kg Bulk.....................................................................each891-1 Apiezon® Type M, 25g Tube ..................................................................each891-12 Apiezon® Type M, 100g Tube ................................................................each891-101 Apiezon® Type M, 4kg Bulk ...................................................................each891-4 Apiezon® Type N, 25g Tube ..................................................................each891-120 Apiezon® Type T, 25g Tube ...................................................................each891-3 Apiezon® Type H, 25g Tube ..................................................................each891-152 Apiezon® Type AP100, 50g Tube ..........................................................each891-160 Apiezon® Type AP101, 50g Tube ..........................................................each891-162 Apiezon® Type AP101, 4kg Bulk ............................................................each891-75 Apiezon® Q Sealing Compound, 1kg ....................................................each891-81 Apiezon® W Wax, 100g ..........................................................................each891-85 Apiezon® W Wax, 500g ..........................................................................each

FOR APIEZON® TECHNICAL NOTES INCLUDING PROPERTIES, VAPOR PRESSURE, TEMPERATURE AND APPLICATION SUGGESTIONS, VISIT

www.tedpella.com

VACUUM SUPPLIESVacuum Pumping Fluid; Diffusion Pump Oil; Flux Remover/Degreaser & Apiezon® Greases


CELVASEAL™ VACUUM LEAK SEALANT

A specially engineered compound for sealing leaks in high vacuum systems that can repair leaks as large as 2 mi-cro liters/second, even with the system under vacuum. Larger leaks can be re-paired when the vacuum system is at atmosphere.

Available in two forms: spray (ozone safe) and fluid in a brush-on bottle. It has a low vapor pressure which makes it suitable for use in ultra high vacuum systems and withstands repeated tem-perature cycling from -200°C to 400°C (-328°F to 752°F). Steady weight loss of 1.6 x 10 -8 gr/cm2/hr, which is lower than most epoxy based systems. Can be used

at temperatures up to 300°C (572°F) continuously, and up to 400°C (752°F) for short periods. It has good adhesion to cryogenic tem-peratures and excellent electrical resistivity. Can be stored longer than 1 year at 25°C (77°F). Density is 1.14 gr/cm3 and viscosity is 250-1000 cPs. Typical Applications for Celvaseal™include:

■ Glass to metal seals, such as sensor pin feedthroughs

■ Glass-Kovar joints

■ UHV systems with small leaks on metal gaskets or high penetration welds

■ Small leaks in glass vacuum systems

■ Temporary repairs of small cracks in exposed gaskets

■ Sealing hairline cracks in welds and brazed joints

■ Thread sealant of fine pipe threads for mounting sensors and components to vacuum systems

Average Curing Temperature Time

■ 400°C (752°F) 20-30 minutes

■ 250°C (482°F) 60-70 minutes

■ 230°C (446°F) 75-90 minutes

■ Room temperature - Days

891-62 Celvaseal™ Aerosol Spray Can, 6 oz. ............................ each891-63 Celvaseal™ Brush -on Bottle, 2 oz. ................................ each

BRAYCOTE® MICRONIC 803 & 803 VACUUM GREASEPerfluoroether Greases, Wide Temperature Range; Low Volatility; Ultra-High Vacuum Applications

Braycote® Micronic 803 is filtered for ultimate cleanliness. It will provide the kind of purity required for use with vacuum systems employing LaB6 filaments. It is stable under high vacuum and has a temperature range of -63°C to 232°C (below -80°F to >499°F). 803 Micronic was developed for applications involving long-term exposure where high temperature or hard vacuum is expected. It is acceptable for clean room applications.

Standard Braycote® 803 has nearly the same specifications, with-stands high temperatures and is used for hard vacuum. Both types exhibit excellent shelf life because of their inertness. They are white colored and odorless. Lubricity for both types is retained under these adverse conditions.

891-18 Braycote® 803 Vacuum Grease, 56g ............................... each891-19 Braycote® Micronic 803 Vacuum Grease, 56g ............... each891-17 Braycote® Micronic 803 Vacuum Grease, 1 lb. .............. each

DOW CORNING® HIGH VACUUM GREASEHigh Vacuum Grease; General Lab Lubricant Use

Dow Corning® High Vacuum Grease is a stiff, non-melting silicone lubricating material which has temperature range of -40ºC to 200ºC. Although it has a good stability at the higher end of the tempera-ture range than most hydrocarbon greases, it shows a higher out-gassing rate at room temperature. It can be used for high vacuum systems up to the 1x10-6 mbar (1x10-6 torr) range. Due to its initial outgassing, it is recommended to condition vacuum system before use. Not for use in electron microscopes. Also not recommended for use in evaporators which need to be Si free. Other applications include lubricant for glass stopcocks, glass joints, glass rubber con-nections and O-rings on binoculars. Shelf life is 60 months from date of manufacture for unopened containers and stored at normal warehouse conditions.

891-7 Dow Corning® High Vacuum Grease, 150g Tube ......... each

PELCO BELL JAR KLEEN™

A non-scratching polishing and cleaning compound specially formulated for glass and porcelain surfaces. Ideally suited for cleaning glass bell jars used on vacuum evaporators, vacuum chambers from sput-ter and carbon coaters and glass windows in large coating systems. Can be used on Corning®, Schott or Pyrex® glass. Also suit-able to clean metal surfaces like stainless steel, aluminum and copper parts, but will scratch surfaces on soft metals. Main ingre-dient of this environmentally friendly prod-uct is calcium carbonate. Does not contain phosphorus, chlorines or dyes. Sold in 14 oz. container (395gram).

896 PELCO Bell Jar Kleen™, 14 oz. ....................................... each

CONDUCTIVE SILVER GREASE

This conductive silver grease provides antistatic conductiv-ity paired with excellent thermal conductivity between sliding surfaces. At the same time it provides protection from corrosion and moisture and reduces mechanical wear. Exhibits excellent lubrication properties and superb chemical resistance. Typical ap-plications include lubrication of vacuum transfer rods (airlock on SEM), static grounding on seals or O-rings, heat dissipation and lubrication of switches and circuit breakers. Paste like consistency. Service temperature range is -50°C to 200°C (-58°F to 392°F). Pack-aging size is 7 grams in a syringe for easy application.

16052 Conductive Silver Grease, 7g .......................................... each

VACUUM SUPPLIESVacuum Greases; Leak Sealant & PELCO Bell Jar Kleen™


OXYGEN COMPATIBLE (OC®) THREAD SEALER & PASTE

The OC® Three PTFE Paste Joint and Thread Sealer is an oxygen-safe, aqueous based PTFE formulation. It is a homogenous white paste that penetrates thread convolutions more effectively than PTFE tape. Excellent anti-galling and anti-seize properties. Espe-cially capable of sealing oxygen and acetylene cylinder valves.

Excellent vacuum grease for low and mid vacuum range (up to 10-3 Torr /10-3 mbar range). Fully compatible with cryogenic applica-tions; thermally stable from -240°C to +260°C ( -400°F to +500°F). Very useful thread sealer / vacuum grease for laboratory appli-cations. Supplied in practical 4 oz (113g) squeeze tube. Not suit-able for wet conditions; for wet conditions use OC® Five (Product No. 890-5). 890-3 OC® Three Sealer and Grease, 4 oz. ............................... each

HYSOL® VACUUM SEALANT KIT

Hysol® Low Vapor-pressure Ep-oxy Resin Sealant seals small leaks on any type of vacuum system or component quickly and conveniently. It is a two component system resin, free of any solvents. It can be used at pressures of 10-9 or below and at temperatures between

-45°C (-49°F) and +120°C (248°F) (baking temperature). It bonds well with many materials such as metals, ceramics and glass. Equiva-lent to Torr Seal® resin sealant. Kit contains tube of resin, tube of hardener, 10 mixing cups and 10 wooden stirring sticks.

891-60 Hysol® Vacuum Sealant Kit (79.3g Resin / 34g Hardener) ..each

OXYGEN COMPATIBLE (OC®) PASTE & GREASE

The OC® Five paste and the OC® Seven grease are both blended, oxygen safe formulations consist-ing of fine PTFE particles and Halo-carbon® oil, producing a superior

sealant that is chemically inert and environmentally safe. OC® Five comes in the form of a (thicker paste), whereas OC® Seven comes in the form of a grease. They are both suitable for lubrication and sealing applications in high vacuum (10-7 Torr / 10-7 mbar range).

Excellent thread and joint sealant in applications where exposure to oxygen, corrosive gases or harsh chemicals is probable.

Superior lubricant for O-rings, gaskets, bearings, stop cocks, cryo-application, gas valves, etc. Off-white, homogeneous formulation which is thermally stable from -240°C to +232°C (-400°F to +450°F). It is non-flammable, waterproof, odorless, non-toxic, non-migrat-ing as well as anti-corrosive, anti-galling and anti-seize. Supplied in 2 oz (57g) container. Not recommended for aluminum to aluminum applications. Do not use with concentrated alkalis, fluorine or chlo-rine trifluorine.

890-5 OC® Five Paste, 2 oz. ........................................................ each890-7 OC® Seven Grease, 2 oz. .................................................. each

MOLYDAG LUBRICANT 210

Moldydag 210 is a colloidal dispersion of molybdenum disulfide in alcohol. It offers excellent lubrication properties, even under extreme pressures. The material is easily applied by brush, dip or spray methods to surfaces which are not affected by alcohol. It exhibits good adhesion to most substrates

and usually air dries in 5 - 10 minutes. Excess amounts should be avoided. Applications are sliders, rotary shafts, notches, locks and anti-seize thread lubricant. Can be used in small amounts for moving parts in vacuum (after drying). Sold in 30g brush bottle and 20g squeeze bottle.

16061 Molydag Lubricant 210 in Brush Bottle, 30g ...........each16061-20 Molydag Lubriacnt 210 in Squeeze Bottle, 20g .......each

PELCO® NW/KF STYLE VACUUM CONNECTION PARTS, FITTINGS, HOSES & FILTERS

The NW/KF style, quick release vacuum connections are the industry standard for vacuum components in the low and medium vacuum range and can be found on a variety of laboratory, production and test equipment. All PELCO® NW/KF style vacuum connections conform to the international ISO 2861/I standard. Many pumps and vacuum gauges use the standard NW/KF flanges for easy integration. Test systems can be readily and quickly built utilizing the large selection of NW/KF type components and can be easily modified for new tasks and applications. The PELCO® NW/KF style vacuum components are available in the standard NW16 to NW50, with some components available in the smaller NW10.

Continued on next page.

The NW/KF System Refers to the Internal Bore in mm

Internal Diameter

NW10 10mm

NW16 16mm

NW25 25mm

NW40 40mm

NW50 50mm

The terms NW, KF or QF all refer to the same standard quick release vacuum couplings.

VACUUM SUPPLIESVacuum Sealant; Paste; Grease; Lubricant & PELCO® NW/KF Vacuum Connection Parts


STAINLESS STEEL & ALUMINUM BLANK CAPS

Used to blank off vacuum ports not being used. Can also be used for troubleshooting by blanking off sections to determine pos-sible leaks.

NW Blank Caps in 304 Stainless Steel92200-10 NW/KF 10 Blank Cap, 304 SS, OD=30mm ..................... each92200-16 NW/KF 16 Blank Cap, 304 SS, OD=30mm ..................... each92200-25 NW/KF 25 Blank Cap, 304 SS, OD=40mm ..................... each92200-40 NW/KF 40 Blank Cap, 304 SS, OD=55mm ..................... each92200-50 NW/KF 50 Blank Cap, 304 SS, OD=75mm ..................... each

NW Blank Caps in Aluminum92202-10 NW/KF 10 Blank Cap, Aluminum, OD=30mm ............... each92202-16 NW/KF 16 Blank Cap, Aluminum, OD=30mm ............... each92202-25 NW/KF 25 Blank Cap, Aluminum, OD=40mm ............... each92202-40 NW/KF 40 Blank Cap, Aluminum, OD=55mm ............... each

A

BOD

Dimension A = 5mm; B = 2.5mm on all blank caps

PLASTIC PROTECTION CAPS

Used to protect NW/KF flanges from scratches and dust.

92250-16 NW/KF 16 Plastic Protection Caps ...............................pkg/1092250-25 NW/KF 25 Plastic Protection Caps ...............................pkg/1092250-40 NW/KF 40 Plastic Protection Caps ...............................pkg/1092250-50 NW/KF 50 Plastic Protection Caps ...............................pkg/10

A

B

NW/KF WING NUT CLAMPS, CAST ALUMINUM

Cost efficient aluminum die cast clamp to connect standard NW/KF components. NW/KF 16 clamps can be used on NW/KF 10 flanges. This is the most popular wing nut clamp. Thread size: 10-32

92210-16 NW/KF 16 Wing Nut Clamp, A=62mm, B=42.5mm ...... each92210-25 NW/KF 25 Wing Nut Clamp, A=72.6mm, B=55mm ...... each92210-40 NW/KF 40 Wing Nut Clamp, A=89.5mm, B=69.5mm ... each92210-50 NW/KF 50 Wing Nut Clamp, A=122mm, B=94mm ....... each

Thickness = 16.5mm on all Cast Aluminum Wing Nuts

NW/KF WING BOLT CLAMPS, PRECISION CNC MACHINED ALUMINUM

These clamps are precision machined from a solid bar of alu-minum with stainless steel pins and stud. More compact and stronger than cast aluminum. NW/KF 16 can be used on NW/KF 10 flanges. Thread size: 1/4 x 20

92211-16 NW/KF 16 Wing Nut Clamp, A=49.5mm ........................ each92211-25 NW/KF 25 Wing Nut Clamp, A=62.5mm ........................ each92211-40 NW/KF 40 Wing Nut Clamp, A=75mm ........................... each92211-50 NW/KF 50 Wing Nut Clamp, A=100mm ......................... each

B

øA

Thickness B = 16mm on all Machnined Aluminum Wing Nuts

NW/KF WING NUT CLAMPS, FORGED 304 STAINLESS STEEL

Forged 304 stainless steel clamps are suitable for cleanroom en-vironments. NW/KF 16 clamps can be used on NW/KF 10 flanges. Thread size: 5/16 x 18

92209-16 NW/KF 16 Wing Nut Clamp, A=58mm, B=34mm ......... each92209-25 NW/KF 25 Wing Nut Clamp, A=79mm, B=53.5mm ...... each92209-40 NW/KF 40 Wing Nut Clamp, A=93mm, B=66mm ......... each92209-50 NW/KF 50 Wing Nut Clamp, A=110mm, B=80mm ....... each

Thickness = 16.5mm on all Forged 304 SS Wing Nuts

NW/KF CENTERING RINGS, 304 STAINLESS STEEL WITH VITON® O-RING

Used to center and seal NW/KF flanges with o-ring. Viton® ser-vice temperature is 200ºC max.

92220-10 NW/KF 10 Centering Ring w/Viton® O-Ring, A=10mm ...each92220-16 NW/KF 16 Centering Ring w/Viton® O-Ring, A=16mm ...each92220-25 NW/KF 25 Centering Ring w/Viton® O-Ring, A=25mm ...each92220-40 NW/KF 40 Centering Ring w/Viton® O-Ring, A=40mm ...each92220-50 NW/KF 50 Centering Ring w/Viton® O-Ring, A=50mm ...each

B

A

Diameter B = 5.3mm on all O-Rings

VACUUM SUPPLIESBlank Caps; Protection Caps; NW/KF Wing Nut Clamps; NW/KF Wing Bolt Clamps & Centering Rings


NW/KF CENTERING RINGS, 304 STAINLESS STEEL WITH 60 MESH SS SCREEN & VITON® O-RING

Used on pumps and other applications where components need to be shielded from small particles entering.

92222-16M NW/KF 16 Centering Ring w/Viton® O-Ring, 60 Mesh SS Screen, 304 SS, A=16mm ...................................................each92222-25M NW/KF 25 Centering Ring w/Viton® O-Ring, 60 Mesh SS Screen, 304 SS, A=25mm ...................................................each92222-40M NW/KF 40 Centering Ring w/Viton® O-Ring, 60 Mesh SS Screen, 304 SS, A=40mm ...................................................each92222-50M NW/KF 50 Centering Ring w/Viton® O-Ring, 60 Mesh SS Screen, 304 SS, A=50mm ...................................................each

Diameter B = 5.3mm on all O-Rings

B

A

NW/KF CENTERING RINGS, 304 STAINLESS STEEL WITH FILTER & VITON® O-RING

15 mesh stainless steel filter to protect pump intake.

92224-16 NW/KF 16 Centering Ring w/15 Mesh SS Filter, 304 SS, A=16mm, C=21mm..............................................................each92224-25 NW/KF 25 Centering Ring w/15 Mesh SS Filter, 304 SS, A=25mm, C=21mm..............................................................each

Diameter B = 5.3mm on both O-Rings

B

A

C

NW/KF ADAPTIVE CENTERING RINGS, 304 STAINLESS STEEL WITH VITON® O-RING

These adapter rings are used when less common (older) NW/KF 10, NW/KF 20 and NW/KF 32 flanges need to be connected to the standard NW/KF parts.

92225-1016 NW/KF 10-16 Adaptive Centering Ring w/Viton® O-Ring, 304 SS, A=17mm, B=12mm, C=10 ....................................each92225-2025 NW/KF 20-25 Adaptive Centering Ring w/Viton® O-Ring, 304 SS, A=26mm, B=22mm, C=20 ....................................each92225-3240 NW/KF 32-40 Adaptive Centering Ring w/Viton® O-Ring, 304 SS, A=41mm, B=34mm, C=32 ....................................each

Diameter = 5.3mm on both O-Rings

A C B

A

92223-16 NW/KF 16 Centering Ring, 304 SS, A=16mm...................each92223-25 NW/KF 25 Centering Ring, 304 SS, A=25mm...................each92223-40 NW/KF 40 Centering Ring, 304 SS, A=40mm...................each92223-50 NW/KF 50 Centering Ring, 304 SS, A=50mm...................each

NW/KF CENTERING RINGS, 304 STAINLESS STEEL WITHOUT O-RING

Made for standard 5.3mm diameter o-rings.

O-RINGS FOR NW/KF CENTERING RINGS IN VITON®, SILICONE AND BUNA-N

Depending on pressure on the O-ring, environment and service temperature, O-rings need to be renewed to ensure leak-free seals. Use the O-rings to service the NW/KF connections on your vacuum systems. O-rings are sold in packages of 10.

Viton® is used for high vacuum applications; max. temperature is 250ºC.

Silicone is used for chemical applications; max. temperature is 220ºC.

Buna-N is used for non-critical and low vacuum applications; max. temperature is 130ºC.

Viton® O-Rings92227-16V Viton® O-Ring for NW/KF 16, B=18.54 ........................... pkg/1092227-25V Viton® O-Ring for NW/KF 25, B=27.94 ........................... pkg/1092227-40V Viton® O-Ring for NW/KF 40, B=42.64 ........................... pkg/1092227-50V Viton® O-Ring for NW/KF 50, B=53.34 ........................... pkg/10

Silicone O-Rings92228-16S Silicone O-Ring for NW/KF 16, B=18.54 ........................ pkg/1092228-25S Silicone O-Ring for NW/KF 25, B=27.94 ........................ pkg/1092228-40S Silicone O-Ring for NW/KF 40, B=42.64 ........................ pkg/1092228-50S Silicone O-Ring for NW/KF 50, B=53.34 ........................ pkg/10

Buna-N O-Rings92229-16B Buna-N O-Ring for NW/KF 16, B=18.54 ......................... pkg/1092229-25B Buna-N O-Ring for NW/KF 25, B=27.94 ......................... pkg/1092229-40B Buna-N O-Ring for NW/KF 40, B=42.64 ......................... pkg/1092229-50B Buna-N O-Ring for NW/KF 50, B=53.34 ......................... pkg/10

Cross Section Diameter A = 5.3mm on all O-Rings

B

A

For Product Details, Complete Selection of NW/KF Caps, Clamps & O-Rings: www.tedpella.com/vacuum_html/NW-caps-rings.htm

VACUUM SUPPLIESNW/KF Centering Rings & O-Rings


NW/KF 45º ELBOW, 304 STAINLESS STEEL92301-16 NW/KF 16 45º Elbow, A=23mm ...................................... each92301-25 NW/KF 25 45º Elbow, A=28.5mm ................................... each92301-40 NW/KF 40 45º Elbow, A=42.7mm ................................... each92301-50 NW/KF 50 45º Elbow, A=50.5mm ................................... each

A

A

NW/KF 90º ELBOW, 304 STAINLESS STEEL92300-16 NW/KF 16 90º Elbow, A=40.5mm ................................... each92300-25 NW/KF 25 90º Elbow, A=42mm ...................................... each92300-40 NW/KF 40 90º Elbow, A=61.5mm ................................... each92300-50 NW/KF 50 90º Elbow, A=80mm ...................................... each

A

A

NW/KF 90º MITERED ELBOW, 304 STAINLESS STEEL92302-16 NW/KF 16 90º Mitered Elbow, A=40mm ........................ each92302-25 NW/KF 25 90º Mitered Elbow, A=50mm ........................ each92302-40 NW/KF 40 90º Mitered Elbow, A=65mm ........................ each92302-50 NW/KF 50 90º Mitered Elbow, A=80mm ........................ each

A

A

NW/KF 180º RETURN ELBOW, 304 STAINLESS STEEL92305-16 NW/KF 16 90º Return Elbow, A=57mm, B=42.5mm ..... each92305-25 NW/KF 25 90º Return Elbow, A=76mm, B=55mm ........ each92305-40 NW/KF 40 90º Return Elbow, A=114mm, B=80.5mm ... each92305-50 NW/KF 50 90º Return Elbow, A=152mm, B=106mm .... each

A

B

NW/KF 90º REDUCING/ADAPTIVE ELBOW, 304 STAINLESS STEEL92306-2516 NW/KF 25-16 90º Reducing Elbow, A=40mm, B=40.4mm ....................................................... each92306-4016 NW/KF 40-16 90º Reducing Elbow, A=40mm, B=40.4mm ....................................................... each92306-4025 NW/KF 40-25 90º Reducing Elbow, A=40mm, B=40.4mm ....................................................... each92306-5016 NW/KF 50-16 90º Reducing Elbow, A=50mm, B=50.5mm ....................................................... each92306-5025 NW/KF 50-25 90º Reducing Elbow, A=50mm, B=50.5mm ....................................................... each92306-5040 NW/KF 50-40 90º Reducing Elbow, A=65mm, B=65.5mm ....................................................... each

A

B

FLG 1

FLG 2

NW/KF EQUAL TEE, 304 STAINLESS STEEL92320-16 NW/KF 16 Equal Tee, A=40mm....................................... each92320-25 NW/KF 25 Equal Tee, A=51mm....................................... each92320-40 NW/KF 40 Equal Tee, A=61mm....................................... each92320-50 NW/KF 50 Equal Tee, A=80mm....................................... each

A

A

NW/KF REDUCING TEE, 304 STAINLESS STEEL92322-2516 NW/KF 25-16 Reducing Tee, A=100mm, B=43mm ....... each92322-4016 NW/KF 40-16 Reducing Tee, A=130mm, B=49.5mm .... each92322-4025 NW/KF 40-25 Reducing Tee, A=130mm, B=56.5mm .... each92322-5016 NW/KF 50-16 Reducing Tee, A=140mm, B=56mm ....... each92322-5025 NW/KF 50-25 Reducing Tee, A=140mm, B=62.7mm .... each92322-5040 NW/KF 50-40 Reducing Tee, A=140mm, B=71.5mm .... each

A

B

NW/KF EQUAL 4-WAY CROSS, 304 STAINLESS STEEL92334-16 NW/KF 16 4-Way Equal Cross, A=40mm ....................... each92334-25 NW/KF 25 4-Way Equal Cross, A=52mm ....................... each92334-40 NW/KF 40 4-Way Equal Cross, A=61.5mm .................... each 92334-50 NW/KF 50 4-Way Equal Cross, A=80mm ....................... each

A

A

VACUUM SUPPLIESPELCO® NW/KF Elbows, Tees & Crosses


PELCO® NW/KF BALL VALVES

PELCO® ball valves offer an elegant, easy and quick way to close/open vacuum lines. They have a relatively high conductance with NW16 having a 13mm ID and NW25 having a 20mm ID. The 3-way change-over ball valves enable the connection of two systems to one pump. They can be used up to a vacuum level of 1 x 10-6 mbar. Primarily used in backing lines on rotary or scroll pumps. Working temperature range -20 to 80°C (-4 to 176°F).

Materials■ NW connections: 304 stainless steel■ Ball valve: 304 stainless steel■ Valve body: nickel plated brass■ Stem: brass■ Stem/ball seals: nitrile rubber■ Handle: zinc/diecast alloy

NW/KF EQUAL 5-WAY CROSS, 304 STAINLESS STEEL92335-16 NW/KF 16 5-Way Equal Cross, A=40mm ....................... each92335-25 NW/KF 25 5-Way Equal Cross, A=52mm ....................... each92335-40 NW/KF 40 5-Way Equal Cross, A=61.5mm .................... each 92335-50 NW/KF 50 5-Way Equal Cross, A=80mm ....................... each

A

A

NW/KF REDUCING 4-WAY CROSS, 304 STAINLESS STEEL92332-2516 NW/KF 25-16 Reducing 4-Way Cross ............................ each92332-4016 NW/KF 40-16 Reducing 4-Way Cross ............................ each92332-4025 NW/KF 40-25 Reducing 4-Way Cross ............................ each92332-5016 NW/KF 50-16 Reducing 4-Way Cross ............................ each92332-5025 NW/KF 50-25 Reducing 4-Way Cross ............................ each92332-5040 NW/KF 50-40 Reducing 4-Way Cross ............................ each

A

B

NW/KF STRAIGHT TUBE, 304 STAINLESS STEEL92324-16 NW/KF 16 Straight Tube, A=80mm ................................ each92324-25 NW/KF 25 Straight Tube, A=100mm .............................. each92324-40 NW/KF 40 Straight Tube, A=130mm .............................. each 92324-50 NW/KF 50 Straight Tube, A=160mm .............................. each

A

NW/KF 2-WAY INLINE BALL VALVES, BRASS/NICKEL PLATED92398-16 NW/KF 16 2-Way Inline Ball Valve, A=100mm .............. each92398-25 NW/KF 25 2-Way Inline Ball Valve, A=130mm .............. each

NW/KF 3-WAY BALL VALVES, BRASS/NICKEL PLATED

Change over ball valve: Handle to the left opens base connection to left connection; Handle in middle position closes both sides; Handle to the right opens base connection to right connection.

92399-16 NW/KF 16 3-Way Ball Valve, A=96mm, B=46mm ......... each92399-25 NW/KF 25 3-Way Ball Valve, A=125mm, B=65mm ....... each

NW/KF RIGHT ANGLE BALL VALVES, BRASS/NICKEL PLATED

92397-16 NW/KF 16 Right Angle Ball Valve, A=48mm, B=46mm......each92397-25 NW/KF 25 Right Angle Ball Valve, A=63mm, B=65mm......each

VACUUM SUPPLIESNW/KF Crosses; Straight Tubes & PELCO® NW/KF Ball Valves

NEW PELCO® NW/KF BALL VALVES

PELCO® KF Manual Angle Valves are manufactured from stainless steel and feature a Viton® seal, making them ideal for high vacu-um applications. Poppet design allows unimpeded, high volume air flow, Viton® seal design ensures long product life and KF fittings allow for easy mounting and un-mounting. Applications include vacuum pumping systems, semiconductor technology, research systems, or any use requiring a flange type seal.

■ Port size: 19mm (0.75”)■ Material: 304 stainless steel■ Seal material: Viton®■ Bellows: Welded AM-350 s. steel■ Vacuum range: 1 x 10-9 mbar■ Leak test: 1 x 10-9 std cc/sec He■ Bake temperature: 120°C (248°F)

92396-16 NW/KF 16 Manual Angle Valve, Stainless Steel, A=51mm (2.15”), B=60mm (2.36”), C=137mm (5.47”), Weight=0.45kg (1 lb)........................each92396-25 NW/KF 25 Manual Angle Valve, Stainless Steel, A=52mm (2.05”), B=60mm (2.36”), C=134mm (5.27”), Weight=0.91kg (2 lb)........................each92396-40 NW/KF 40 Manual Angle Valve, Stainless Steel, A=65mm (2.56”), B=60mm (2.36”), C=164mm (6.45”), Weight=1.81kg (4 lb)........................each92396-50 NW/KF 50 Manual Angle Valve, Stainless Steel, A=76.2mm (3.00”), B=60mm (2.36”), C=198mm (7.80”), Weight=4.54kg (10 lb)..................each

.........................................................................................................................................................................................................................................................................


NW/KF HOSE FLANGES WITH WIRE REINFORCED PVC VACUUM HOSE

Low cost alternative for flexible stainless vacuum hoses. Wire reinforced PVC tubing with 304 stainless steel NW/KF flanges on each end and secured with stainless steel hose clamps.

92422-1620 NW/KF 16 PVC Hose, A=20”, B=3/4” .............................. each92422-1640 NW/KF 16 PVC Hose, A=40”, B=3/4” .............................. each92422-2520 NW/KF 25 PVC Hose, A=20”, B=1” ................................. each92422-2540 NW/KF 25 PVC Hose, A=40”, B=1” ................................. each92422-4020 NW/KF 40 PVC Hose, A=20”, B=1-1/2” ........................... each92422-4040 NW/KF 40 PVC Hose, A=40”, B=1-1/2” ........................... each92422-5020 NW/KF 50 PVC Hose, A=20”, B=2” ................................. each92422-5040 NW/KF 50 PVC Hose, A=40”, B=2” ................................. each

NW/KF REDUCING, FLEXIBLE METAL HOSES, 304 STAINLESS STEEL

Efficient way to connect different NW/KF sizes, save on adapters and reduce number of vacuum components. Wall thickness: 0.006”.

NW/KF 50 to 40 Use 1-1/2” Internal Hose Diameter92350-5410 NW/KF 50-40, 10” Reducing Flexible Metal Hose ......... each92350-5420 NW/KF 50-40, 20” Reducing Flexible Metal Hose ......... each

NW/KF 50 to 25 Use 1” Internal Hose Diameter92351-5210 NW/KF 50-25, 10” Reducing Flexible Metal Hose ......... each93251-5220 NW/KF 50-25, 20” Reducing Flexible Metal Hose ......... each

NW/KF 50 to 16 Use 5/8” Internal Hose Diameter92352-5110 NW/KF 50-16, 10” Reducing Flexible Metal Hose ......... each92352-5120 NW/KF 50-16, 20” Reducing Flexible Metal Hose ......... each

NW/KF 40 to 25 Use 1” Internal Hose Diameter92354-4210 NW/KF 40-25, 10” Reducing Flexible Metal Hose ......... each92354-4220 NW/KF 40-25, 20” Reducing Flexible Metal Hose ......... each



PELCO® NW/KF FLEXIBLE METAL HOSES, 304 STAINLESS STEELA Superior Alternative to Rubber or Reinforced Plastic Hoses

These durable, thin walled, flexible stainless steel hoses do not al-ter or crack like rubber or plastic hoses and do not collapse under heavy vacuum, have less connection parts and therefore less pos-sible leaks in a vacuum system. NW/KF flexible metal hoses are made using 304 stainless steel and may be cleaned with solvents. They have a thickness of 0.006” except for the 80” lengths NW 40 and NW 50 which have a thickness of 0.010”.

NW/KF 16 has a 3/4” internal hose diameter; NW/KF 25 has a 1” internal hose diameter; NW/KF 40 has a 1-1/2” internal hose diam-eter; NW/KF 50 has a 2” internal hose diameter.

NW/KF 16 Flexible Hoses92340-1610 NW/KF 16 10” Flexible Metal Hose, 304 SS .....................each92340-1612 NW/KF 16 12” Flexible Metal Hose, 304 SS .....................each92340-1620 NW/KF 16 20” Flexible Metal Hose, 304 SS .....................each92340-1624 NW/KF 16 24” Flexible Metal Hose, 304 SS .....................each92340-1630 NW/KF 16 30” Flexible Metal Hose, 304 SS .....................each92340-1636 NW/KF 16 36” Flexible Metal Hose, 304 SS .....................each92340-1640 NW/KF 16 40” Flexible Metal Hose, 304 SS .....................each92340-1680 NW/KF 16 80” Flexible Metal Hose, 304 SS .....................each

NW/KF 25 Flexible Hoses92341-2510 NW/KF 25 10” Flexible Metal Hose, 304 SS .....................each92341-2512 NW/KF 25 12” Flexible Metal Hose, 304 SS .....................each92341-2520 NW/KF 25 20” Flexible Metal Hose, 304 SS .....................each92341-2524 NW/KF 25 24” Flexible Metal Hose, 304 SS .....................each92341-2530 NW/KF 25 30” Flexible Metal Hose, 304 SS .....................each92341-2540 NW/KF 25 40” Flexible Metal Hose, 304 SS .....................each92341-2580 NW/KF 25 80” Flexible Metal Hose, 304 SS .....................each

NW/KF 40 Flexible Hoses92342-4010 NW/KF 40 10” Flexible Metal Hose, 304 SS .....................each92342-4020 NW/KF 40 20” Flexible Metal Hose, 304 SS .....................each92342-4024 NW/KF 40 24” Flexible Metal Hose, 304 SS .....................each92342-4030 NW/KF 40 30” Flexible Metal Hose, 304 SS .....................each92342-4040 NW/KF 40 40” Flexible Metal Hose, 304 SS .....................each92342-4080 NW/KF 40 80” Flexible Metal Hose, 304 SS .....................each

NW/KF 50 Flexible Hoses92343-5010 NW/KF 50 10” Flexible Metal Hose, 304 SS .....................each92343-5020 NW/KF 50 20” Flexible Metal Hose, 304 SS .....................each92343-5030 NW/KF 50 30” Flexible Metal Hose, 304 SS .....................each92343-5040 NW/KF 50 40” Flexible Metal Hose, 304 SS .....................each92343-5080 NW/KF 50 80” Flexible Metal Hose, 304 SS .....................each

NW/KF COMPRESSED METAL BELLOWS, 304 STAINLESS STEEL, 4” LONG

Wall thickness: 0.006”, internal diameters same as hoses above.

92346-1604 NW/KF 16 4” Compressed Metal Bellows ..................... each92346-2504 NW/KF 25 4” Compressed Metal Bellows ..................... each92346-4004 NW/KF 40 4” Compressed Metal Bellows ..................... each92346-5004 NW/KF 50 4” Compressed Metal Bellows ..................... each

WIRE REINFOCED THICK WALL PVC VACUUM HOSE

Use with hose adapters and hose clamps to make custom vacuum hoses. Can be ordered per ft. with minimum length of 3 ft. and maximum length of 50 ft. Wire is embedded in PVC hose.

Permits full vacuum capabilities (29.9 in./Hg.) for all sizes with-out hose collapse. Constructed of corrosion-resistant PVC, can be used to transport various chemicals in areas with tight turns and sharp bends. Its bend radius is approximately four times the ID Can be used at temperatures from +10° to +140°F (-12° to +60°C)

92424-25 1/4” ID, 0.447” OD, Wire Reinforced PVC Hose .......... per/ft.92424-38 3/8” ID, 0.600” OD, Wire Reinforced PVC Hose .......... per/ft.92424-50 1/2” ID, 0.736” OD, Wire Reinforced PVC Hose .......... per/ft.92424-75 3/4” ID, 1.028” OD, Wire Reinforced PVC Hose .......... per/ft.92424-100 1” ID, 1.290” OD, Wire Reinforced PVC Hose ............. per/ft.92424-150 1-1/2” ID, 1.854” OD, Wire Reinforced PVC Hose ....... per/ft.92424-200 2” ID, 2.394” OD, Wire Reinforced PVC Hose ............. per/ft.

VACUUM SUPPLIESPELCO® NW/KF Flexible Metal Hoses; PVC Hoses; Compressed Metal Bellows; Reducing Hoses & Hose Flanges


1/4” ID SILICONE VACUUM HOSE

Thick walled silicone vacuum hose with 1/4” (6.35mm) inside diameter and 1/2” (12.7mm) out-side diameter. Sturdy, yet flexible material with wall thickness of 1/8” (3.2mm), will not collapse under vacuum. Can be used with NW/KF Multiple Hose Adapter to KF-16. Sold in lengths of 3 and 9 ft.

92490-253 1/4” ID, Silicone Vacuum Hose .........................................3 ft.92490-256 1/4” ID, Silicone Vacuum Hose .........................................9 ft.

1/2” & 3/4” ID VACUUM HOSE

Heavy wall, versatile and resilient natural, pure gum rubber tubes. These cost effective vacuum hoses have a good oxidation resistance, are vibration

resistant and have excellent rebound characteristics. Durometer 45±5. Meets or exceeds standard ZZ-T831C, minimum tensile strength 3000PSI.

894-5 1/2” ID, Rubber Vacuum Hose ...................................... per/ft.894-7 3/4” ID, Rubber Vacuum Hose ...................................... per/ft.

NW/KF HOSE ADAPTERS, ALUMINUM

Machined from solid bar; no welds.

92410-1638 NW/KF 16, 3/8” Adapter, A=12mm, B=44mm ............... each92410-1650 NW/KF 16, 1/2” or 5/8” Adapter, A=16mm, B=42mm .. each92410-1675 NW/KF 16, 5/8” or 3/4” Adapter, A=19mm, B=42mm .. each92410-2538 NW/KF 25, 3/8” Adapter, A=12mm, B=44mm ............... each92410-2550 NW/KF 25, 1/2” or 5/8” Adapter, A=16mm, B=42mm .. each92410-2575 NW/KF 25, 5/8” or 3/4” Adapter, A=19mm, B=42mm .. each92410-2500 NW/KF 25, 3/4” or 7/8” Adapter, A=22.5mm, B=44mm ..each92410-40 NW/KF 40, 1-1/2” or 1-5/8” Adapter, A=41.5mm, B=55mm ....................................................... each92410-50 NW/KF 50, 1-1/2” or 1-5/8” Adapter, A=41.5mm, B=55mm ....................................................... each

NW/KF HOSE ADAPTERS, 304 STAINLESS STEEL

Machined from solid bar; no welds.

92420-16 NW/KF 16, 3/4” Hose Adapter, A=18.3mm, B=32mm, C=20mm ..................................... each92420-25 NW/KF 25, 1” HoseAdapter, A=25.4mm, B=38mm, C=26mm ..................................... each92420-40 NW/KF 40, 1-1/2” HoseAdapter, A=38.1mm, B=50mm, C=38mm ..................................... each92420-50 NW/KF 50, 2” HoseAdapter, A=50.8mm, B=55mm, C=40mm ..................................... each

NW/KF MULTIPLE HOSE ADAPTER, ALUMINUM

3-step aluminum adapters for 1/4”, 1/2” and 5/8” hoses.

92400-16 NW/KF 16 Multi Hose Adapter, 5mm ID ........................ each92400-25 NW/KF 25 Multi Hose Adapter, 5mm ID ........................ each92400-40 NW/KF 40 Multi Hose Adapter, 5mm ID ........................ each92400-50 NW/KF 50 Multi Hose Adapter, 5mm ID ........................ each

HOSE CLAMPS FOR VACUUM HOSE, STAINLESS STEEL

These clamps are compatible with the wire reinforced, thick wall PVC vacuum hose we offer. They are quick, economical and re-usable. Bands are 0.023” thick x 5/16” wide (1/4”) and 1/2” wide (all other sizes) with temperature range of –50° to +250° F. Not recommended for use with silicone hose. Clamps tighten with a wrench, slotted screwdriver or hex nutdriver. Made from type 301 stainless steel with type 410 stainless steel screw.

92426-25 1/4” Vacuum Hose Clamp, SS ........................................ each92426-38 3/8” Vacuum Hose Clamp, SS ........................................ each92426-50 1/2” Vacuum Hose Clamp, SS ........................................ each92426-75 3/4” Vacuum Hose Clamp, SS ........................................ each92426-100 1” Vacuum Hose Clamp, SS ........................................... each92426-150 1-1/2” Vacuum Hose Clamp, SS ..................................... each92426-200 2” Vacuum Hose Clamp, SS ........................................... each

NW/KF COMPACT CONICAL REDUCERS, 304 SS92450-2516 NW/KF 25-16 Compact Conical Reducer ........................ each92450-4016 NW/KF 40-16 Compact Conical Reducer ........................ each92450-4025 NW/KF 40-25 Compact Conical Reducer ........................ each92450-5016 NW/KF 50-16 Compact Conical Reducer ........................ each92450-5025 NW/KF 50-25 Compact Conical Reducer ........................ each92450-5040 NW/KF 50-40 Compact Conical Reducer ........................ each

Diameter A = 40mm

VACUUM SUPPLIESNW/KF Hose Adapters; Hose Clamps; Vacuum Hose & Conical Reducers


NW/KF STUB FLANGES IN 304 STAINLESS STEEL & ALUMINUM, UNBORED

Used to blank off ports not be-ing used. Can be used to modify

for specific applications. The stub offers extra material to modify and connect non-standard vacuum connections.

Unbored, NW/KF Stub Flanges in 304 Stainless Steel92470-16 NW/KF 16 Stub Flange, A=19mm, B=19mm ................. each92470-25 NW/KF 25 Stub Flange, A=25mm, B=19mm ................. each92470-40 NW/KF 40 Stub Flange, A=38mm, B=25mm ................. each92470-50 NW/KF 50 Stub Flange, A=50mm, B=25mm ................. each

Unbored, NW/KF Stub Flanges in Aluminum92472-16 NW/KF 16 Stub Flange, A=19mm, B=19mm ................. each92472-25 NW/KF 25 Stub Flange, A=25mm, B=19mm ................. each92472-40 NW/KF 40 Stub Flange, A=38mm, B=25mm ................. each92472-50 NW/KF 50 Stub Flange, A=50mm, B=25mm ................. each

NW/KF FLANGE ADAPTERS TO FEMALE NPT THREAD

Used to connect pipes, systems and thermocouples (1/8”) with NPT thread to NW/KF flange system. Commonly used to connect filters with NPT thread on adaptors on the exhaust port of rotary vane pumps. Use OC® Three (Product No. 890-3) as a sealant and to prevent seizing. Please note that NPT (National Pipe Thread) does not refer to the outside diameter of the thread.

NW/KF Flange Adapters to 1/8” Female NPT - Stainless Steel92464-16 NW/KF 16 Adapter to 1/8”, A=16mm, B=19mm ............ each92464-25 NW/KF 25 Adapter to 1/8”, A=23mm, B=19mm ............ each92464-40 NW/KF 40 Adapter to 1/8”, A=32mm, B=25mm ............ each92464-50 NW/KF 50 Adapter to 1/8”, A=45mm, B=25mm ............ each

NW/KF Flange Adapters to 1/4” Female NPT - Stainless Steel92465-16 NW/KF 16 Adapter to 1/4”, A=16mm, B=19mm ............ each92465-25 NW/KF 25 Adapter to 1/4”, A=23mm, B=19mm ............ each92465-40 NW/KF 40 Adapter to 1/4”, A=32mm, B=25mm ............ each92465-50 NW/KF 50 Adapter to 1/4”, A=45mm, B=25mm ............ each

NW/KF Flange Adapters to 1/2” Female NPT - Stainless Steel92466-25 NW/KF 25 Adapter to 1/2”, A=23mm, B=19mm ............ each92466-40 NW/KF 40 Adapter to 1/2”, A=32mm, B=25mm ............ each92466-50 NW/KF 50 Adapter to 1/2”, A=45mm, B=25mm ............ each

NW/KF Flange Adapters to 3/4” Female NPT - Stainless Steel92467-40 NW/KF 40 Adapter to 3/4”, A=32mm, B=25mm ............ each92467-50 NW/KF 50 Adapter to 3/4”, A=45mm, B=25mm ............ each

NW/KF Flange Adapters to 1/8” Female NPT - Aluminum92468-16 NW/KF 16 Adapter to 1/8”, A=16mm, B=19mm ............ each92468-25 NW/KF 25 Adapter to 1/8”, A=23mm, B=19mm ............ each92468-40 NW/KF 40 Adapter to 1/8”, A=32mm, B=25mm ............ each92468-50 NW/KF 50 Adapter to 1/8”, A=45mm, B=25mm ............ each

NW/KF Flange Adapters to 1/4” Female NPT - Aluminum92469-16 NW/KF 16 Adapter to 1/4”, A=16mm, B=19mm ............ each92469-25 NW/KF 25 Adapter to 1/4”, A=23mm, B=19mm ............ each92469-40 NW/KF 40 Adapter to 1/4”, A=32mm, B=25mm ............ each92469-50 NW/KF 50 Adapter to 1/4”, A=45mm, B=25mm ............ each

B

AWRENCH

FLAT

A

NW/KF FLANGE ADAPTERS TO MALE NPT THREAD

Used to connect pipes and systems with NPT thread to NW/KF flange system. Stainless steel adapters are welded and helium leak tested. Aluminum adapters are made from one piece (more cost effective alternative). Use OC® Three (Product No. 890-3) as a sealant and to prevent seizing.

NW/KF Flange Adapters to 1/8” Male NPT - Stainless Steel92474-16 NW/KF 16 Adapter to 1/8”, A=26mm ............................. each92474-25 NW/KF 25 Adapter to 1/8”, A=26mm ............................. each92474-40 NW/KF 40 Adapter to 1/8”, A=26mm ............................. each92474-50 NW/KF 50 Adapter to 1/8”, A=26mm ............................. each

NW/KF Flange Adapters to 1/4” Male NPT - Stainless Steel92475-16 NW/KF 16 Adapter to 1/4”, A=32mm ............................. each92475-25 NW/KF 25 Adapter to 1/4”, A=50mm ............................. each92475-40 NW/KF 40 Adapter to 1/4”, A=32mm ............................. each92475-50 NW/KF 50 Adapter to 1/4”, A=32mm ............................ each

NW/KF Flange Adapters to 1/2” Male NPT - Stainless Steel92476-25 NW/KF 25 Adapter to 1/2”, A=47mm ............................. each92476-40 NW/KF 40 Adapter to 1/2”, A=47mm ............................. each92476-50 NW/KF 50 Adapter to 1/2”, A=47mm ............................. each

NW/KF Flange Adapters to 3/4” Male NPT - Stainless Steel92477-25 NW/KF 25 Adaptor to 3/4”, A=47mm ............................. each 92477-40 NW/KF 40 Adapter to 3/4”, A=47mm ............................. each92477-50 NW/KF 50 Adapter to 3/4”, A=47mm ............................. each

NW/KF Flange Adapters to 1”, 1-1/4” & 1-1/2” Male NPT - Stainless Steel92478-5000 NW/KF 50 Adapter to 1”, A=55mm ................................ each92478-5025 NW/KF 50 Adapter to 1-1/4”, A=80mm .......................... each92478-5050 NW 50 Adapter to 1-1⁄2”, A=80mm ................................ each

NW/KF Flange Adapters to 1⁄8” Male NPT - Aluminum92484-16 NW 16 Adapter to 1/8”, A=32mm ................................... each92484-25 NW 25 Adapter to 1/8”, A=32mm ................................... each92484-40 NW 40 Adapter to 1/8”, A=32mm ................................... each92484-50 NW 50 Adapter to 1/8”, A=32mm ................................... each

NW/KF Flange Adapters to 1/4” Male NPT - Aluminum92485-16 NW 16 Adapter to 1/4”, A=32mm ................................... each92485-25 NW 25 Adapter to 1/4”, A=32mm ................................... each92485-40 NW 40 Adapter to 1/4”, A=32mm ................................... each92485-50 NW 50 Adapter to 1/4”, A=32mm ................................... each

NW/KF Flange Adapters to 1/2” Male NPT - Aluminum92486-25 NW 25 Adapter to 1/2”, A=38mm ................................... each92486-40 NW 40 Adapter to 1/2”, A=38mm ................................... each92486-50 NW 50 Adapter to 1/2” , A=38mm .................................. each

NW/KF Flange Adapters to 3/4” Male NPT - Aluminum92487-25 NW 40 Adapter to 3/4”, A=51mm ................................... each92487-40 NW 40 Adapter to 3/4”, A=51mm ................................... each92487-50 NW 50 Adapter to 3/4”, A=51mm ................................... each

NW/KF Flange Adapters to 1”, 1-1/4”, 1-1/2” & 2” Male NPT - Aluminum92488-5000 NW 50 Adaptor to 1”, A=51mm...................................... each92488-5025 NW 50 Adaptor to 1-1⁄4”, A=65mm ................................ each92488-5050 NW 50 Adaptor to 1-1⁄2”, A=65mm ................................ each92488-5100 NW 50 Adaptor to 2”, A=65mm...................................... each

VACUUM SUPPLIESNW/KF Stub Flanges & Flange Adapters


PELCO® NW/KF HIGH VACUUM ELECTRICAL FEEDTHROUGHS

The PELCO® NW/KF Electrical Feedthrough is a universal type feedthrough, which can be used either as high voltage or instru-mentation feedthrough for devices in vacuum. The PELCO® NW/KF Electrical Feedthrough has 4 wires and each wire is rated to a maximum of 1000V and 1A in vacuum. The wires are color coded; white, black, red and green and have no connectors. The feedthrough is based on an aluminum bored stub and available in NW/KF 16, 25, 40 and 50.

Specifications

■ Flange Material: aluminum

■ Flange Sizes: NW/KF 16, 25, 40 and 50

■ Max. Voltage: 1000V

■ Max. Current in Vacuum: 1A

■ Vacuum Rating: up to 10-6mbar (10-6 Torr)

■ Number of Wires: 4; white, black, red and green

■ Wire Gauge (AWG) / Number of Strands: 24 / 7

■ Wire Insulation: PTFE

■ Wire Length: 8”

■ Operating Temperature: -20°C to 125°C (-4°F to 257°F)

■ Applications: high voltage or instrumentation

92516-16 PELCO® NW/KF 16 Electrical Feedthrough, 4 Wires, Aluminum/PTFE, A=19mm, B=27mm ............................ each92516-25 PELCO® NW/KF 25 Electrical Feedthrough, 4 Wires, Aluminum/PTFE, A=25mm, B=27mm ............................ each92516-40 PELCO® NW/KF 40 Electrical Feedthrough, 4 Wires, Aluminum/PTFE, A=38mm, B=33mm ............................ each92516-50 PELCO® NW/KF 50 Electrical Feedthrough, 4 Wires, Aluminum/PTFE, A=51mm, B=33mm ............................ each

NW/KF VIEWPORTS WITH 7056 GLASS WINDOW

The NW/KF Viewports consist of a one piece assembly. The view-port assembly replaces a blanking plate and uses a standard NW/KF Centering Assembly and Clamp for sealing (not included). The window size for NW16 and NW25 is 16mm (0.62”). For NW40 and NW50, the window has a diameter of 38mm (1.51”). The body is made of stainless steel, the window is made of 7056 borosili-cate glass. Useful for observing inside vacuum lines or chambers. Temperature range -20°C to 200°C (-4°F to 392°F). Viton® seal. Vacuum range down to 1x10-9 Torr.

92519-16 NW/KF 16 Viewport, Style B, A=16mm, B=10mm ........ each92519-25 NW/KF 25 Viewport, Style A, A=16mm, B=10mm ........ each92519-40 NW/KF 40 Viewport, Style B, A=38mm, B=14mm ........ each92519-50 NW/KF 50 Viewport, Style A, A=38mm, B=14mm ........ each

NW/KF 25 Style A Viewport

NW/KF 40 Style B Viewport

PELCO® NW/KF TO SWAGELOK® ADAPTER

The NW/KF to Swagelok® Adapters allow the connection of small tubes with the widely used Swagelok® connectors. Enables easy connection to existing small diameter tube constructions for evac-uating the tubes. Ideal for research, instrumentation and experi-mental set-ups. All stainless steel 304 construction. Available for 1/8”, 1/4”, 3/8” and 1/2” tubes.

NW/KF 16 to Swagelok® Adapters92497-1612 Adapter for 1/8” Tubes, A=32mm .................................. each92497-1625 Adapter for 1/4” Tubes, A=39mm .................................. each92497-1638 Adapter for 3/8” Tubes, A=43mm .................................. each92497-1650 Adapter for 1/2” Tubes, A=50mm .................................. each




FOR PRODUCT TECHNICAL NOTES, DETAILED SPECIFICATIONS, DEPOSITION TECHNIQUESAND APPLICATION SUGGESTIONS, VISIT

www.tedpella.com

VACUUM SUPPLIESElectrical Feedthrough; NW/KF Viewports & Swagelok®


NEW CF 1.33 TO NW/KF FLANGE ADAPTERS92620-16 CF 1.33 to NW/KF 16 Adapter, 304 Stainless Steel, Non- rotatable A=16mm (0.63”), B=33.78mm (1.33”), C=44.45mm (1.75”)...........................................................each92620-25 CF 1.33 to NW/KF 25 Adapter, 304 Stainless Steel, Non- rotatable A=25mm (0.98”), B=33.78mm (1.33”), C=45.21mm (1.78”)...........................................................each92620-40 CF 1.33 to NW/KF 40 Adapter, 304 Stainless Steel, Non- rotatable A=40mm (1.57”), B=33.78mm (1.33”), C=45.21mm (1.78”)...........................................................each92620-50 CF 1.33 to NW/KF 50 Adapter, 304 Stainless Steel, Non- rotatable A=50mm (1.97”), B=33.78mm (1.33”), C=44.45mm (1.95”)...........................................................each

NEW CF 2.75 TO NW/KF FLANGE ADAPTERS92630-16 CF 2.75 to NW/KF 16 Adapter, 304 Stainless Steel, Non rotatable A=16mm (0.63”), B=69.85mm (2.75”), C=45.21mm (1.78”) .........................................................each92630-25 CF 1.33 to NW/KF 25 Adapter, 304 Stainless Steel, Non- rotatable A=25mm (0.98”), B=69.85mm (2.75”), C=45.21mm (1.78”) .........................................................each92630-40 CF 1.33 to NW/KF 40 Adapter, 304 Stainless Steel, Non- rotatable A=40mm (1.57”), B=69.85mm (2.75”), C=45.21mm (1.78”) .........................................................each92630-50 CF 1.33 to NW/KF 50 Adapter, 304 Stainless Steel, Non- rotatable A=50mm (1.97”), B=69.85mm (2.75”), C=44.45mm (1.95”) .........................................................each

NEW CF 3.38 TO NW/KF FLANGE ADAPTERS92640-40 CF 3.38 to NW/KF 40 Adapter, 304 Stainless Steel, Non- rotatable A=40mm (1.57”), B=85.85mm (3.38”), C=45.72mm (1.80”) .........................................................each92640-50 CF 3.38 to NW/KF 50 Adapter, 304 Stainless Steel, Non- rotatable A=50mm (1.57”), B=85.85mm (3.38”), C=45.72mm (1.80”) .........................................................each

NEW CF 4.50 TO NW/KF FLANGE ADAPTERS92650-50 CF 4.50 to NW/KF 50 Adapter, 304 Stainless Steel, Non- rotatable A=50mm (1.97”), B=114.30mm (4.50”), C=49.53mm (1.95”) ........................................................each

VACUUM SUPPLIESCF to NW/KF & ISO-KI to NW/KF Flange Adapters; CF Copper Gaskets; ISO-K Style Centering Rings & Fitting Clamps

NEW ISO-K 63 TO NW/KF FLANGE ADAPTERS92660-25 ISO 63 to NW/KF 25 Adapater, 304 Stainless Steel A=ISO 63, B=NW/KF 25, C=46.23mm (1.82”) ............... each92660-40 ISO 63 to NW/KF 40 Adapter, 304 Stainless Steel A=ISO 63, B=NW/KF 40, C=46.23mm (1.82”) .............. each92660-50 ISO 63 to NW/KF 50 Adapater, 304 Stainless Steel A=ISO 63, B=NW/KF 50, C=46.23mm (1.82”) .............. each

NEW ISO-K 80 TO NW/KF FLANGE ADAPTERS92670-40 ISO 80 to NW/KF 40 Adapter, 304 Stainless Steel A=ISO 80, B=NW/KF 40, C=46.23mm (1.82”) ............. each92670-50 ISO 80 to NW/KF 50 Adapter, 304 Stainless Steel A=ISO 80, B=NW/KF 50, C=46.23mm (1.82”) ............. each

NEW ISO-K 100 TO NW/KF FLANGE ADAPTERS92680-40 ISO 100 to NW/KF 40 Adapter, 304 Stainless Steel A=ISO 100, B=NW/KF 40, C=46.23mm (1.82”) ........... each92680-50 ISO 100 to NW/KF 50 Adapter, 304 Stainless Steel A=ISO 100, B=NW/KF 50, C=46.23mm (1.82”) ............. each

NEW CF COPPER GASKETS92620-13 CF Copper Gasket, Oxygen-free Copper CF=1.33, A=16.27mm (0.64”), B=21.34mm (0.84”) ....... each92630-37 CF Copper Gasket, Oxygen-free Copper CF=2.75, A=36.83mm (1.45”), B=48.00mm (1.89”) ....... each92640-33 CF Copper Gasket, Oxygen-free Copper CF=3.38, A=51.05mm (2.01”), B=61.47mm (2.42”) ....... each92650-45 CF Copper Gasket, Oxygen-free Copper CF=4.50, A=76.45mm (3.01”), B=91.44mm (3.60”) ....... each

NEW ISO-K STYLE CENTERING RINGS92660-63 ISO 63 Centering Ring ISO=63, A=94mm (3.70”), B=66.8mm (2.63”).................each92670-80 ISO 80 Centering Ring ISO=80, A=109mm (4.29”), B=79.8mm (3.14”)...............each92680-100 ISO 100 Centering Ring ISO=100, A=128mm (5.04”), B=98.8mm (3.89”).............each

NEW ISO-K FITTING CLAMPS92660-CS Single Claw Clamp, Aluminum ISO=63/80/100, A=24.13mm (0.95”), B=22.61mm (0.89”), Thread=M8 x 35L ..............................................................each92660-C Double Claw Clamp, 304 Stainless Steel ISO=63/80/100, A=24.13mm (0.95”), B=50.29mm (1.98”), Thread=M8 x 45L ..............................................................each

92660-CS Single Claw Clamp 92660-C Double Claw Clamp


TUNGSTEN WIRE BASKETSA Wide Selection of Single & Multiple Strand Wire Baskets for EM and Thin Film Applications

The tungsten boats, baskets and filaments are manufactured from high grade tungsten. Of all metals pure form, tungsten has the highest melting point (3422°C / 6192°F), the lowest vapor pres-sure at temperatures above 1650°C (3000°F) and has the highest tensile strength. Tungsten also has the lowest coefficient of ther-mal expansion of any pure metal. This combination of properties makes tungsten the ideal material for evaporation sources. During evaporation, it can alloy with some materials such as Al or Au. In this case, another evaporation source material should be used such as alumina coated boats or baskets. Other materials useful for evaporation sources are molybdenum and tantalum.

SINGLE STRAND TUNGSTEN WIRE BASKETS

Single strand, thin tungsten wire (0.5 - 0.75mm) baskets designed for small power supplies rated at 30 - 50A as commonly used in EM coating sys-tem. Suitable for thin films only.

Prod. No. Turns I.D.(mm)

Height(mm)

OverallLength(mm)

WireDia.

(inches)72-1 9 4 8 72 0.50 / 0.02073-1 8 9 13 82 0.75 / 0.03074-1 9 4 7 80 0.50 / 0.02075-1 8 7 9 100 0.50 / 0.020

72-1 Tungsten Wire Baskets .................................................pkg/1073-1 Tungsten Wire Baskets .................................................pkg/1074-1 Tungsten Wire Baskets .................................................pkg/1075-1 Tungsten Wire Baskets .................................................pkg/10

SINGLE STRAND, 5-COIL

0.030” (0.76mm) wire diameter, 5 coils, 1-7/8” L (47.6mm), 1/2” (12.7mm) basket height, 3/16” (4.8mm) inside coil diameter.Settings: 2.48V/23A/57W for 1800°C.

76-1 5-Coil Tungsten Wire Baskets, 1/2” x 3/16” ..................pkg/5


0.030” (0.76mm) wire diameter, 4 coils, 1-7/8” L (47.6mm), 5/8” (15.9mm) basket height, 1/4” (6.35mm) inside coil diameter.Settings: 2.90V/23A/67W for 1800°C.

76-2 4-Coil Tungsten Wire Baskets, 5/8” x 1/4” ....................pkg/5


0.030” (0.76mm) wire diameter, 5 coils, 1-7/8” L (47.6mm), 3/4” (19mm) basket height, 1/4” (6.35mm) inside coil diameter.Settings: 3.77V/23A/87W for 1800°C.

76-3 5-Coil Tungsten Wire Baskets, 3/4” x 1/4” ....................pkg/5

3-STRAND

0.020” (0.51mm) diameter wire, 2” L (51mm), 3-1/2 turns, top inside diameter 0.1” (2.54mm), height 0.275” (7mm). For use with the Cressington 208C and 308R metal evaporation accessory.

76 3-Strand Tungsten Wire Baskets, 0.1” x 0.275” .........pkg/10

3-STRAND, 5-COIL

3 x 0.025” (0.635mm) wire diameter, 5 coils, 1-7/8” L (47.6mm), 1/2” (12.7mm) bas-ket height, 3/16” (4.8mm) inside coil diameter.Settings: 2.30V/23A/90W for 1800°C.

76-13 3-Strand, 5-Coil Tungsten Wire Baskets, 1/2” x 3/16” ...pkg/5

3-STRAND, 4-COIL

3 x 0.025” (0.635mm) wire diameter, 4 coils, 1-7/8” L (47.6mm), 5/8” (15.9mm) bas-ket height, 1/4” (6.35mm) in-side coil diameter.Settings: 2.66V/42A/112W for 1800°C.

76-23 3-Strand, 4-Coil Tungsten Wire Baskets, 5/8” x 1/4” .....pkg/5

3-STRAND, 5-COIL

3 x 0.025” (0.635mm) wire diameter, 5 coils, 1-7/8” L (47.6mm), 3/4” (19mm) basket height, 1/4” (6.35mm) inside coil diameter.Settings: 3.54V/43A/152W for 1800°C.

76-33 3-Strand, 5-Coil Tungsten Wire Baskets, 3/4” x 1/4” .....pkg/5

ALUMINA COATED EVAPORATION SOURCESIdeal for Low Power Thermal Evaporation Supplies

The Alumina coated tungsten evaporation basket is an eff-cient design which acts as an

internally heated crucible. The ceramic coated evaporation bas-kets for vacuum evaporation have the distinct advantage that they require relatively low power (63 to 768 W) to reach a temperature of 1475°C (high enough to evaporate Ni in high vacuum). This will enable many researchers to experiment with thermal evaporation who only have access to low cost, low power evaporation sup-plies. The closed side crucible form allows to use pallets, grains, wires or even powders as evaporation material for upwards evaporation applications. Molten metal evaporants are contained as an induction propelled spinning ball inside the cavity. Most

BA

C

Continued on next page.

VACUUM SUPPLIESTungsten Wire Baskets


VACUUM SUPPLIESAlumina Covered Wire Baskets; Tungsten Filaments & Tungsten Coils

EVAPORATION VIEWING GLASS

Dark glass to safely view metal or carbon evapor-tion process through belljars or glass windows. Impact resistant. 2 x 4-1/4” (5 x 10.8cm). AWS shade #10.

55 Evaporation Viewing Glass .......................................................each

MOLYBDENUM FOIL

For aperture cleaning, evaporation and experimentation

86 Molybdenum Foil, 0.002” (0.05mm) Thick, 6” x 6” (15.2 x 15.2cm) ...............................................................each

materials can be completely evaporated without loss to the cruci-ble. A broad range of evaporation materials can be used in these alumina coated sources: Au, Ag, Pd, In, Sn, Sb, Bi, Cd, Cu, Pb, Zn, Co, Ni, Fe, Mn and alloys such as Nichrome and Permalloy. Maximum temperature for this type of alumina coated tungsten basket should not exceed 1800°C. There are 6 different types of baskets available with a top opening ranging from 0.15” to 0.90”.

Continued from previous page.

Prod. No./ Style

Volts Amps WattsWireDia.

“A”Top ID

Inside Depth

“B”OAL

“C”Height

VOL cm3

84-21Style 1

5.70 11 63 0.020” 0.150” 0.225” 4” 0.375” 0.021

84-22Style 2

6.20 40 248 0.040” 0.375” 0.350” 4” 0.500” 0.21

84-23Style 3

6.90 39 272 0.040” 0.420” 0.425” 4” 0.575” 0.32

84-24Style 4

13.00 33 429 0.040” 0.790” 0.725” 31⁄4” 0.875” 1.92

84-25Style 5

7.00 50 350 0.050” 0.500” 0.775” 4” 0.925” 0.83

84-27Style 6

15.80 49 768 0.050” 0.900” 0.975” 4” 1.125” 3.36

84-21 Style 1, Alumina Coated Tungsten Wire Basket ........... each84-22 Style 2, Alumina Coated Tungsten Wire Basket ........... each84-23 Style 3, Alumina Coated Tungsten Wire Basket ........... each84-24 Style 4, Alumina Coated Tungsten Wire Basket ........... each84-25 Style 5, Alumina Coated Tungsten Wire Basket ........... each84-27 Style 6, Alumina Coated Tungsten Wire Basket ........... each

TUNGSTEN FILAMENTS & TUNGSTEN COILSVacuum Deposition Supplies for EM Sample Preparation

Tungsten filaments and coils are manufactured from high grade tungsten. Of all metals in pure form, tungsten has the high-est melting point (3422°C/6192°F), the lowest vapor pressure at temperatures above 1650°C (3000°F) and has the highest tensile strength. Tungsten also has the lowest coefficient of thermal ex-pansion of any pure metal. This combination of properties makes tungsten the ideal material for evaporation sources.

3-STRAND TUNGSTEN “V” FILAMENT

Vacuum grade tungsten wire, 0.5mm (0.020”) diameter, 89mm long (3-3/8”). The “V” is 12.7mm (1/2”) deep, and has an included angle of 45°.

27-101 3-Strand “V” Filament .................................................pkg/10

1-STRAND TUNGSTEN “V” FILAMENT

Vacuum grade tungsten wire filaments, 0.5mm (0.02”) diam-eter, 64mm long (2-1/2”). The “V” is 12.7mm (1/2”) deep, and has an included angle of 45°.

27-19 1-Strand “V” Filament .................................................pkg/10

3-STRAND, 10-COIL, TUNGSTEN FILAMENT

3 x 0.025” (0.635mm) diam-eter, 10 coils, 4” L (101.6mm), coil length 1” (25.4mm), 1/16” (1.6mm) ID of coil.Settings: 3.0V/42A/126W for 1800°C.

84-11 3-Strand, 10-Coil Tungsten Filament, 1/16” ID ............pkg/5


3 x 0.025” (0.635mm) diameter, 4 coils, 4” L (101.6mm), coil length 1-3/4” (44.45mm), 3/16” (4.8mm) ID of coilSettings: 3.43V/49A/168W for 1800°C.

84-12 3-Strand, 4-Coil Tungsten Filament, 3/16” ID ..............pkg/5


3 x 0.025” (0.635mm) diam-eter, 6 coils, 4” L (101.6mm), coil length 1-3/4” (4.5cm), 1/4” (6.3mm) ID of coil.Settings: 5.3V/48A/254W for 1800°C.

84-20 3-Strand, 6-Coil Tungsten Filament, 1/4” ID ................pkg/5


VACUUM SUPPLIESTungsten Filaments & Tungsten Evaporation Boats

CHROMIUM PLATED TUNGSTEN RODS

Chromium Plated Tungsten Rods are an alternative for Cr evapo-ration when only a low power evaporation power supply is avail-able. 0.05” (1.27mm) W rod, plated with a 0.01” (0.25mm) high purity Cr layer. Available in 2” (51mm) and 4” (102mm) lengths.

Settings for 2” L: 1.05V / 78A / 82W for 1800°C.Settings for 4” L: 2.02V / 78A / 158W for 1800°C. 29-242 Cr Plated Tungsten Rod, 2” ............................................. each29-244 Cr Plated Tungsten Rod, 4” ............................................. each


3 x 0.025” (0.635mm) diam-eter, 10 coils, 5” L (127mm), coil length 2” (50.8mm), 1/4” (6.35mm) ID of coil. Settings: 8.05V/45A/362W for 1800°C.



3 x 0.025” (0.635)mm diam-eter, 8 coils, 5” L (127mm), coil length 2” (50.8mm), 3/8” (9.5mm) ID of coil.Settings: 8.72V/44A/384W for 1800°C.



0.025” (0.635mm) diameter, 6 coils, 1-7/8” L (47.6mm), coil length 1” (25.4 mm), 3/16” (4.8mm) ID of coil.Settings: 3.13V/44A/138W for 1800°C.



3 x 0.025” (0.635mm) diam-eter, 4 coils, 1-7/8” L (47.6mm), coil length 1” (25.4mm), 3/16” (4.8mm) ID of coil.Settings: 2.3V/47A/108W for 1800°C.



3 x 0.020” (0.51mm) diameter, 6 coils, 2” L (5cm), coil length 3/4” (19.1 mm), 1/8” (3.2mm) ID of coil. For use with the Cressington 208C and 308R metal evaporation accessory.


TUNGSTEN WIRE ROD SOURCE

Tungsten rod source with fine tungsten wire. This type of source is designed for applications where a relatively large amount of material needs to be evaporated with a lower power evaporation source. The fine tungsten wire accommodates more molten ma-terial than the standard single or three strand evaporation fila-ments. Suitable for low and medium temperature materials. The rod is 4” (101.6mm) long with a 0.1”(2.5mm) diameter. The 0.020” (0.5mm) diameter wire is wrapped in 8 layers over a 2” (50.8mm) wide length.

Settings: 1.12V/148A/166W for 1500°C 84-14 Tungsten Rod Source, 4” L ............................................. each

TUNGSTEN METAL BOATSFor Cleaning Molybdenum Apertures & Evaporation

Two of the tungsten boats listed in this brochure are a combination of the refractory metal tungsten and an alumina barrier (Al2O3) coating over the tab area. The exposed metal area comprising the bottom of the boat allows the sample to be in good thermal con-tact with the source. The barrier will tend to help concentrate the heat towards the center. The alumina barrier will inhibit an evapo-rant (if used as a sample instead of an aperture) from creeping toward the heat sink or from wetting the entire boat.

The tungsten boats are manufactured from high grade tungsten. Of all metals in pure form, tungsten has the highest melting point (3422°C/6192°F), the lowest vapor pressure at temperatures above 1650°C (3000°F) and has the highest tensile strength. Tungsten also has the lowest coefficient of thermal expansion of any pure metal. This combination of properties makes tungsten the ideal material for evaporation sources.

3-1/4” L x 1/2” W (82.5 x 12.7mm), trough: 1/4” W x 3/4” L (6.35 x 19.05mm) x 3/32” D (2.38mm).

Tungsten thickness: 0.010” (0.25mm). Al2O3 = 0.010” (0.25mm) coating; Settings: 0.95V/136A/129W for 1200°C.

84-2 Tungsten Boat- Al2O3 Barrier, 1/4” x 3/4” Trough .....pkg/5

TUNGSTEN BOATS WITH Al2O3 BARRIERS


VACUUM SUPPLIESTungsten Evaporation Boats

4” L x 1” W (101.6 x 25.4mm), trough: 5/8” W x 1-3/4” L (15.9 x 44.5mm) x 3/32” D (2.4mm). Tungsten thickness:

0.010” (0.25mm). Al2O3 = 0.010” (0.25mm) coating; Settings: 1.43V/264A/378W for 1200°C.

84-3 Tungsten Boat- Al2O3 Barrier, 5/8” x 1-3/4” Trough ..pkg/5

Replaces alumina cru-cibles for some specific applications. Good heat transfer yet has alumina inertness. Evaporant does not wet the alumi-

na: no resistant change of the boat when evaporant melts. Due to the non-wetting characteristic, the evaporant forms a sphere when melted resulting in a point source.

4” L x 1/2” W (101 x 12mm). Trough is a dimple: 1/2” diameter and 1/8” deep (12 x 3mm). Alumina coated thickness: 0.005” (0.127mm); Tungsten thickness: 0.010” (0.25mm); Settings: 1.29V/190A/245W for 1200°C.

84-4 Tungsten Boat, Alumina Coated, 1/2” Dimple ...........pkg/5

4” L x 1” W (101.6 x 25.4mm), trough: 1” W x 2-1/8” L (25.4 x 58.8mm) x 3/32” D (2.4mm). Tungsten thickness: 0.010” (0.25mm); Set-tings: 3.01V/391A/1177W for 1800°C.

84-5 Tungsten Boat, 1” x 2-1/8” Trough .............................pkg/5

4” L x 1/2” W (101.6 x 12.7mm), trough: 1/2” W x 1-1/2” L x (12.7 x 38.1mm) x 1/8” D (3.2mm). Tung-sten thickness: 0.010” (0.25mm); Settings: 2.90V/196A/568W for 1800°C.

84-7 Tungsten Boat, 1/2” x 1-1/2” Trough .........................pkg/5

TUNGSTEN BOATS WITH Al2O3 BARRIERS

ALUMINA COATED EVAPORATION SOURCE

TUNGSTEN BOATS WITHOUT ALUMINA BARRIERS

4” L x 3/4” W (101.6 x 19mm), trough: 1/2” W x 1-1/2” L x (12.7 x 38.1mm) x 1/8” D (3.2mm). Tungsten thickness: 0.010” (0.25mm); Settings: 3.28V/300A/984W for 1800°C.

84-8 Tungsten Boat, 1/2” x 1-1/2” Trough .........................pkg/5

Tungsten evaporation boat with narrow section trough, 3.5” x 3/4” (89 x 19mm), trough is 1/4” W x 1/8” D x 3/4” L (6.35 x 3.2 x 19mm). Tung-sten thickness: 0.005” (0.127mm); Settings: 1.95V/100A/195W for 1800°C.

84-36 Tungsten Boat, 1/4” x 1/8” x 3/4” Narrow Trough ...pkg/5

Tungsten evaporation boat with narrow section trough, 3.5” x 3/4” (89 x 19mm). Trough is 1/4” W x 1/8” D x 3/4” L (6.35 x 3.2 x 19mm). Tung-sten thickness: 0.010” (0.254mm); Settings: 1.47V/158A/232W for 1800°C.

84-37 Tungsten Boat, 1/4” x 1/8” x 3/4” Narrow Trough ....pkg/5

Tungsten evaporation boat with narrow section trough, 4” x 3/4” (102 x 19mm). Trough is 1/4”W x 1/8”D x 1-1/2”L (6.35 x 3.2 x 38mm). Tung-sten thickness: 0.005” (0.127mm); Settings: 2.76V/96A/265W for 1800°C.

84-38 Tungsten Boat, 1/4” x 1/8” x 1-1/2” Narrow Trough .. pkg/5

3” L x 3/4” W (76.2 x 19.5mm), trough: 5/8” W x 1” L (15.9 x 25.4mm) x 1/8” D (3.18mm). Tungsten thickness: 0.005” (0.127mm); Set-tings: 3.04V/199A/605W for 1800°C.

84-6 Tungsten Boat, 5/8” x 1” Trough .................................. pkg/5

1-1/4” L x 3/8” W (32 x 9.5mm), trough: 3/8” W x 1/2” L (9.5 x 12.7mm) x 1/32” D (0.8mm).Tungsten thickness: 0.002” (0.05mm).

84 Tungsten Boat, 3/8” x 1/2” Trough ............................... pkg/5

1-1/4” L x 1/4” W (32 x 6.35mm), trough: 1/8” W x 3/8” L (3mm x 9.5mm) x 1/16” D (1.6mm).Tungsten thickness: 0.001” (0.025mm).

84-30 Tungsten Boat, 1/8” x 3/8” Trough ............................... pkg/5


VACUUM SUPPLIESTungsten Evaporation Boats

Small tungsten evapora-tion boat with dimple, 1-7/8” x 1/2 (47.6 x 12.7mm). Dimple: 3/8” (9.5mm) diameter x 1/8” D (3.2mm). Tung-sten thickness: 0.005” (0.127mm); Settings: 1.83V/143A/262W for 1800°C.

80-30 Tungsten Boat, Small, 3/8” x 1/8” Dimple ................... pkg/5

Small tungsten evapora-tion boat with dimple, 1-7/8” x 1/4” (47.6 x 6.35mm). Dimple: 3/16” (4.76mm) diameter x 1/16” (1.6mm) deep. Tungsten thickness: 0.005” (0.127mm); Set-tings: 1.69V/80A/135W for 1800°C.

84-31 Tungsten Boat, Small, 3/16” x 1/16” Dimple............... pkg/5

Small tungsten evapora-tion boat with dimple, 1-7/8” x 1/2” (47.6 x 12.7mm). Middle section raised. Dimple: 7/16” (11.1mm) diameter x 3/32” (2.38mm) deep-Tungsten thickness: 0.005” (0.127mm); Set-tings: 1.83V/145A/265W for 1800°C.


Small tungsten evapora-tion boat with dimple, 1-7/8” x 1/2” (47.6 x 12.7mm). Middle sec-tion recessed. Dimple: 7/16” (11.1mm) diameter x 1/8” (3.2mm) deep. Tungsten thickness: 0.005” (0.127mm); Set-tings: 1.88V/144A/271W for 1800°C.

84-33 Tungsten Boat, Small, 7/16” x 1/8” Dimple ................. pkg/5

Small tungsten evapora-tion boat with dimple, 1-7/8” x 1/4 “ (47.6 x 6.35mm). Middle section raised. Dimple: 3/16” (4.76mm) diameter x 1/16” (1.6mm) deep. Tungsten thickness: 0.005” (0.127mm); Set-tings: 2.03V/76A/154W for 1800°C.


Small tungsten evapora-tion boat with dimple, 1-7/8” x 1/2” (47.6 x 12.7mm). Decreased cross section. Dimple: 7/16” (11.1mm) diameter x 1/8” (3.2mm) deep. Tungsten thickness: 0.005” (0.127mm); Set-tings: 2.57V/129A/332W for 1800°C.

84-35 Tungsten Boat, Small, 7/16” x 1/8” Dimple ................. pkg/5

Directional (covered) boat source for small area / thick deposition. Efficient source. 3” x 1/4” (76 x 6.4mm) with 1/8” (3.2mm) hole. Tantalum thickness: 0.005” (0.127mm); Set-tings: 1.43V/267A/267W for 1600°C.

84-41 Tantalum Directional Boat Source, 3” x 1/4” ................each

Directional (covered) boat source for small area / thick deposi-tion. Efficient, small source. 1-7/8” x 1/4” (47.6 x 6.4mm) with 1/8” (3.2mm) hole. Tanta-lum thickness: 0.005” (0.127mm); Settings: 1.07V/131A/140W for 1600°C.

84-51 Tantalum Directional Boat Source, 1-7/8” x 1/4” .........each

Covered boat source for directional deposi-tion. Efficient, small source allows for either small area deposition or thicker deposition in a small area. 1-7/8” x 3/4” (47.6 x 19.2mm) with

1/8” (3.2mm) hole. Molybdenum thickness: 0.005” (0.127mm); Settings: 0.79V/251A/198W for 1400°C.

84-52 Molybdenum Covered Boat Source, 1-7/8” x 3/4”, Hole on One Side ............................................................... pkg/3

Covered boat source for directional deposition. On-axis hole. 1-7/8” x 3/4” (47.6 x 19.2mm) with 1/8” (3.2mm) hole. Molybdenum thickness: 0.005” (0.127mm); Set-tings: 0.83V/248A/206W for 1400°C.

84-55 Molybdenum Covered Boat Source, 1-7/8” x 3/4”, Hole on Axis ....................................................................... pkg/3


VACUUM SUPPLIESWires & Materials for Vacuum Evaporation Deposition

HIGH PURITY EVAPORATION MATERIALS

High Purity Evaporation Materi-als in form of pieces, granules or pellets. Packed in glass vials in quantities varying from 5-25 grams. Used for thin film research, thermal evaporation and electron microscopy coatings.

29-12 Magnesium, Mg, Purity 99.95%, ø1/4” x 1/4” Pellets .......10g29-13 Aluminum, Al, Purity 99.999%, ø1/4” x 1/4” Pellets .........25g29-14 Silicon, Si, Purity 99.999%, 1-3mm Random Sized Pieces..........................................................10g29-22 Titanium, Ti, Purity 99.995%, ø1/4” x 1/4” Pellets ............10g29-23 Vanadium, V, Purity 99.7%, ø1/4” x 1/4” Pellets.................5g29-24 Chromium, Cr, Purity 99.95%, 1-3mm Random Sized Pieces..........................................................25g29-25 Manganese, Mn, Purity 99.7%, 1-3mm Random Sized Pieces..........................................................25g 29-26 Iron, Fe, Purity 99.9%, ø1/4” x 1/4” Pellets........................25g29-27 Cobalt, Co, Purity 99.95%, ø1/4” x 1/4” Pellets .................10g29-28 Nickel, Ni, Purity 99.9%, ø1/8” x 1/8” Pellets ....................25g29-2824 Nichrome, Ni (80%) / Cr (20%), Purity 99.9%, ø1/4” x 1/4” Pellets..............................................................25g29-29 Copper, Cu, Purity 99.999%, 1-3mm Random Sized Pieces..........................................................10g29-30 Zinc, Zn, Purity 99.99%, 1-3mm Random Sized Pieces ....25g29-32 Germanium, Ge, Purity 99.999%, 1-3mm Random Sized Pieces............................................................5g29-39 Yttrium, Y, Purity 99.9%, 1-3mm Random Sized Pieces ....5g29-40 Zirconium, Zr, Purity 99.7%, ø1/4” x 1/4” Pellets .............25g29-41 Niobium, Nb, Purity 99.95%, ø1/4” x 1/4” Pellets.............10g29-46 Palladium, Pd, Purity 99.99%, ø1/8” x 1/8” Pellets ...........10g29-47 Silver, Ag, Purity 99.99%, 1-3mm Random Sized Pieces ...10g29-49 Indium, In, Purity 99.99%, 1-3mm Random Sized Pieces ..10g 29-50 Tin, Sn, Purity 99.999%, 1-3mm Random Sized Pieces ...10g29-51 Antimony, Sb, Purity 99.999%, 1-3mm Random Sized Pieces..........................................................10g29-52 Tellurium, Te, Purity 99.999%, 1-3mm Random Sized Pieces..........................................................25g29-79 Gold, Au, Purity 99.99%, 1-3mm Random Sized Pieces ..10g29-82 Lead, Pb, Purity 99.999%, 1-3mm Random Sized Pieces ...25g29-83 Bismuth, Bi, Purity 99.999%, 1-3mm Random Sized Pieces ...25g29-7946 Gold/Palladium, Purity 99.99%, ø1/8” x 1/8” Pellets ..............10g

27-20 99.95% W, ø0.51mm/6.1m (ø0.020”/20 ft.) .................... each27-2-20 99.95% W, ø0.64mm/6.1m (ø0.025”/20 ft.) .................... each27-3-20 99.95% W, ø0.76mm/6.1m (ø0.030”/20 ft.) .................... each27-11 99.95% W, ø0.13mm/6.1m (ø0.005”/20 ft.) .................... each

WIRES FOR EVAPORATION

High purity Al, Au, Au/Pd, Pd, Pt, Pt/Ir, Ag and Nichrome thin wires for EM and thin film applications. Use Tungsten Filaments for evaporation in high vacuum evapora-tion systems made by Cressington, Den-ton, Edwards, Joel, Ladd or others. W thin wire is offered for additional deposition/evaporation/filament applications.

Aluminum20/10-1 99.99% Al, ø0.25mm/15.2m (ø0.010”/50 ft.) .................. each20/15-1 99.99% Al, ø0.38mm/15.2m (ø0.015”/50 ft.) .................. each

Gold21-2 99.95% Au, ø0.20mm/0.6m (ø0.008”/2 ft.) ..................... each21-10 99.95% Au, ø0.20mm/3m (ø0.008”/10 ft.) ...................... each21-50 99.95% Au, ø0.20mm/15.2m (ø0.008”/50 ft.) ................. each21-100 99.95% Au, ø0.20mm/30.4m (ø0.008”/100 ft.) ............... each

Gold / Palladium22-2 60:40, 99.95% Au:Pd, ø0.20mm/0.6m (ø0.008”/2 ft.) .... each22-10 60:40, 99.95% Au:Pd, ø0.20mm/3.05m (ø0.008”/10 ft.) ...each22-50 60:40, 99.95% Au:Pd, ø0.20mm/15.2m (ø0.008”/50 ft.) ...each

Nichrome13082 30 gauge (ø0.010”, 10mil, 0.25mm), 30.48m (100 ft.) ... each

Palladium26-2 99.95% Pd, ø0.20mm/0.6m (ø0.008”/2 ft.) ..................... each26-10 99.95% Pd, ø0.20mm/3m (ø0.008”/10 ft.) ...................... each26-50 99.95% Pd, ø0.20mm/15.2m (ø0.008”/50 ft.) ................. each

Platinum23-2 99.95% Pt, ø0.20mm/0.6m (ø0.008”/2 ft.)....................... each23-10 99.95% Pt, ø0.20mm/3m (ø0.008”/10 ft.)........................ each23-50 99.95% Pt, ø0.20mm/15.2m (ø0.008”/50 ft.) .................. each

Platinum / Iridium24-6-2 80:20, 99.95% Pt:Ir, ø0.20mm/0.6m (ø0.008”/2 ft.) ........ each24-6-10 80:20, 99.95% Pt:Ir, ø0.20mm/3m (ø0.008”/10 ft.) ......... each

Platinum / Palladium24-2 80:20, 99.95% Pt:Pd, ø0.20mm/0.6m (ø0.008”/2 ft.) ...... each 24-10 80:20, 99.95% Pt:Pd, ø0.20mm/3m (ø0.008”/10 ft.) ....... each

Silver25-10 99.99% Ag, ø0.20mm/3m (ø0.008”/10 ft.) ...................... each25-50 99.99% Ag, ø0.20mm/15.2m (ø0.008”/50 ft.) ................. each

TUNGSTEN WIRE

Tungsten, vacuum grade, cleaned and coiled.

CHROMIUM PLATED TUNGSTEN RODS

Chromium Plated Tungsten Rods are an alternative for Cr evapo-ration when only a low power evaporation power supply is avail-able. 0.05” (1.27mm) W rod, plated with a 0.01” (0.25mm) high purity Cr layer. Available in 2” (51mm) and 4” (102mm) lengths.

Settings for 2” L: 1.05V / 78A / 82W for 1800°C.Settings for 4” L: 2.02V / 78A / 158W for 1800°C. 29-242 Cr Plated Tungsten Rod, 2” ............................................. each29-244 Cr Plated Tungsten Rod, 4” ............................................. each

Evaporation Materials Pricing: Please call or email for pricing on precious evaporation materials/wires. Actual prices may vary due to sudden price changes for precious metals.


TED PELLA, INC.Microscopy Products for Science and Industry

www.tedpella.com [email protected] 800-237-3526

Your Source for Vacuum Equipment & Supplies

vacuum evaporation equipment & supplies

Documents