VACUUM COATING TECHNOLOGY

P R O D U C T R A N G E PLANNING, MANUFACTURING, ASSEMBLY, START-UP

Sandstraße 5 · 63589 LinsengerichtTelefon +49 (0) 60 51 / 7 34 43info@mst-techno.com · www.mst-techno.com

Description:

The 1100 series characterizes a vertical in-line coating system, designed for the coating of glass panels. By using PVD process both conductive and non-conductive target materials can be coated.

Our automated coating system can handle substrate sizes of up to 1.200 mm × 1.600 mm in a cycle-time of 80 sec/carrier.

Characteristics:

The double-side loading of the carrier increases the operational capacity of the production line and the cost-e� ectiveness by factor 2. The fl exible modular design of the equipment allows us to adjust 100 % to the requirements of our customers.

Illustration shows an automated vertical in-line coating line, successfully installed in China in 2011.

DELIVERY PROGRAMME VACUUM COATING TECHNOLOGY

Our delivery programme ranges from fl exible batch coaters for research and development to high operation capacity in-line systems for your production.Our business activities cover every step of your project, from the initial idea to the fi nal acceptance in your plant. To achieve optimal results we maintain close contact with our customers throughout every stage of the project.

• Project management

• Creation of specifi c concept for equipment

• Design

• Mechanical design

• Electro-technical design

• Compilation of control software and visualisation

• Production

• Mechanical production

• Electro-technical production

• Assembly and commissioning

• Mechanical assembly

• Electro-technical assembly

• Commissioning of the complete system

Design of a 7°-in-line system

Example of an FEM calculation

User interface in-line system

market requirements productionconcept

manu-facturing

designproductionassembly

start-up

DELIVERY PROGRAMME VACUUM COATING TECHNOLOGY

escription:

The BeHo 1200 series is a horizontal in-line coating system, which has been applied in the most divers of industries.

The system, which is cooled by deep-hole drilling, can be constructed with chamber sizes of from 400 × 400 mm up to 2500 × 4500 mm. The modular design enables us to construct and commission a specifi c system in accordance with the concept and requirements of the individual customer - within only a few weeks.

Characteristics:

The loading and the automated return of the substrates can be carried out variably.

In this way a 50 % saving of building space is possible.

Illustration of a horizontal in-line system for individual application.

Illustration of a horizontal in-line system for individual application.

For some years now, Heinrich Betz GmbH & Co. KG and MST Technology GmbH & Co. KG – together with otherexperienced partners - have combined not only toconstruct new vacuum coating lines but also to refurbish existing ones.

Intensive teamwork over the past few years has resulted in a cooperation which combines expert know-how from 30 years operating experience in the various disciplines of vacuum-coating – and all to your advantage!

We combine this expert knowledge with the application of the most up-to-date design, production and quality

assurance procedures. We plan, design and produce customized system solutions from beginning to end - all from one source.

Speed, fl exibility and absolute customer orientation form the basis of our success in the market.

With us as your high-performance partners, you, too, can benefi t from our long standing expertise and know-how and secure a competitive advantage for yourselves in the market.

Mühlgasse 18-20 · 63683 OrtenbergTelefon +49 (0) 60 46 / 96 05 198vertrieb@hch-betz.de www.betz-maschinenbau.de

Sandstraße 5 · 63589 LinsengerichtTelefon +49 (0) 60 51 / 7 34 43info@mst-techno.com · www.mst-techno.com