v udlpe devilbiss spray gun extensions … · bare spray gun’s exclude needle, air cap, fluid tip...
TRANSCRIPT
A wide range of DeVilbiss extensions are available for those difficultto reach applications.
finishingbrands.eu
DEVILBISS SPRAY GUN EXTENSIONS
The DeVilbiss extension range ismanufactured from brass with stainlesssteel needles as standard, they are
available for Advance HD manual andCobra 2 automatic pressure spray guns.When ordering ensure the part number for
the model is completed with the requiredlength in inches. Other lengths and flexibleextensions are available upon request.
Fan adjuster
(spray guns not included)
C360 degree circular spray
For medium to heavyviscosity materials. Withadjustable spray gap.0.062” tip supplied as
standard.(0.093” tip available)
SC360 degree circular spray
For low to mediumviscosity materials. Withadjustable spray gap.
SAforward round spray
EAforward fan spray
EAXforward fan spray
EXTADV-C-XXXX = add length needed in inches to complete
part number.
EXTADV-SC-XXXX = add length needed in inches to complete
part number.
EXTADV-SA-XXXX = add length needed in inches to complete
part number.
EXTADV-EA-XXXX = add length needed in inches to complete
part number.
EXTADV-EAX-XXXX = add length needed in inches to complete
part number.
EXTCB2-C-XXXX = add length needed in inches to complete
part number.
EXTCB2-SC-XXXX = add length needed in inches to complete
part number.
EXTCB2-SA-XXXX = add length needed in inches to complete
part number.
EXTCB2-EA-XXXX = add length needed in inches to complete
part number.
EXTCB2-EAX-XXXX = add length needed in inches to complete
part number.
3/4” (19mm)
3/8” (9.5mm)
7/16” (11mm)
13/4” (44mm)
7/8” (22mm)
Hardened nozzle versions are available
(type CVT and type HCVT) for Ceramic/Abrasive
paints
SC-MBX version alsoavailable with very finequality spray (gap not
adjustable)
For low to mediumviscosity materials.Supplied with 0.078" (1.98 mm) fluid tip.
Supplied with66BSSx63PBset up. Fluid tip
0.046"(1.17 mm).
Supplied with J2SS x AA1fan spray set up. Fluid tip
0.043" (1.09 mm).
46-1042 round spray cap (optional).
EXTENSION Type of spray To fit Advance HD part number
To fit Cobra 2 part number Clearance diameter Comments
spray tips
mb air systems ltd
mbmb air systems ltd
USA Mexico Brazil
United Kingdom France Germany
China Japan Australia
© Finishing Brands Holdings Inc. DeVilbiss, Ransburg, BGK and Binks are registered trademarks of Finishing Brands.Models and specifications subject to change without notice. All rights reserved.
ARB - 08.10 - UK1852
www.finishingbrands.eu
email: [email protected]
f i n i s h i n g b r a n d s . e u
Sales and Service through ourGlobal Network of Industrial DistributorsFinishing Brands Locations
Americas:
Europe/Asia/Africa:
Pacific Rim:
DEVILBISS SPRAY GUN EXTENSIONS
EB90 degree fan spray
EBX90 degree fan spray
EN45 degree fan spray
ENX45 degree fan spray
ERX30 degree
reverse fan spray
EXTADV-EB-XXXX = add length needed in inches to complete
part number.
EXTADV-EBX-XXXX = add length needed in inches to complete
part number.
EXTADV-EN-XXXX = add length needed in inches to complete
part number.
EXTADV-ENX-XXXX = add length needed in inches to complete
part number.
EXTADV-ERX-XXXX = add length needed in inches to complete
part number.
EXTCB2-EB-XXXX = add length needed in inches to complete
part number.
EXTCB2-EBX-XXXX = add length needed in inches to complete
part number.
EXTCB2-EN-XXXX = add length needed in inches to complete
part number.
EXTCB2-ENX-XXXX = add length needed in inches to complete
part number.
EXTCB2-ERX-XXXX = add length needed in inches to complete
part number.
3” (76mm)
17/8” (48mm)
25/8” (67mm)
13/4” (44mm)
2” (51mm)
Supplied with66BSSx63PB set up.
Fluid tip 0.046" (1.17 mm).
Supplied with J2SS x AA1 fan spray set up.
Fluid tip 0.043" (1.09 mm)
42-1042 round spray cap (optional).
Supplied with66BSSx63PB set up.
Fluid tip 0.046" (1.17 mm).
Supplied with J2SS x AA1 fan spray set up.
Fluid tip 0.043" (1.09 mm)
42-1042 round spray cap (optional).
Supplied with J2SS x AA1 fan spray set up.
Fluid tip 0.046"(1.17 mm).
42-1042 round spray cap (optional).
EXTENSION Type of spray To fit Advance HD part number
To fit Cobra 2 part number Clearance diameter Comments
Fan adjuster
Fan adjuster
To order a spray gun for the extension use the part numbers below. Bare Spray gun’s exclude needle, air cap, fluid tip and retaining ring.
– Advance conventional gun ADV-P000-00– Cobra 2 conventional gun CBA2-000-00
Note: Extensions are “made to order” and therefore cannot be returned for credit.
Length measurement (approximate) is taken from the gun fluid inlet to the tip of the extension.
Extensions are complete with air cap, fluid tip, needle and air cap retaining ring. Extensions do notinclude the spray gun.
All fluid tips are stainless steel except type SC which are chrome plated brass and SA are plated steel.
Length options 6" (15cm), 9" (23cm), 12" (31cm), 15" (38cm), 18" (46cm), 24" (61cm), 30" (76cm), 36" (91cm), 48" (122cm), 60" (152cm), 72" (183cm), 84" (213cm)Extensions are for use on pressure feed applications only.
mb air systems ltd
mbmb air systems ltd