utilift mf 540 02.05 - normet · the utilift mf 540 scissor lift with lifting capacity up to 4.5...

1/11Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND

Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606

[email protected] www.normet.com

Normet reserves the right to change this specification without further notice.

Tier 4f

Technical data sheet10008297102.05.2016Utilift MF 540

FeaturesThe Utilift MF 540 Scissor Lift with lifting capacity up to 4.5 tonnes and max platform height of 4.5 m is designed to provide a safe work platform for all kinds of installation works in tunnels up to 6.5 m (21 feet) high.

Typical applications are fan installations, ventilation ducting, electrification works and piping for air and water ser-vices. Four platform sizes with side shift provide complete drift coverage from single setup practically in all kinds of mine headings. The works can be accomplished safely, efficiently and comfortably from the level work deck, elevated to a optimum work height. Optional remote drive system from the deck brings fully new type efficiency into installa-

tion and assembly works in underground mines.

The powerful liquid cooled turbo charged Cummins 119 kW TIER 4f approved engine provides clean and efficient op-eration and gives maximum speed of 9 km/h in upward inclined 1:7 tunnel. In horizontal tunnel the maximum speed is 28 km/h.

Vehicle has optional front axle suspension system that improves driving safety and comfort and reduces fatique. The suspension system reduces vibration from wheels to the cabin and improves handling of the vehicle. The suspension system gives efficiency and speed to vehicle usage, with safety and comfort for the driver and the passenger.

The new Normet FOPS and ROPS approved safety cabin provides superior visibility and comfortable compartment for the driver and the passenger. Cabin is designed for safe and easy entry and exit. Door openings are wide and handrails and non-slip steps are correctly positioned. Dashboard is easy and simple to use. New multifunctional display (MID) provides driving information (speed, RPM, temperatures etc.) and information can be recorded for analysis. Enclosed cabin provides noise level < 75 dB ensuring safe and comfort driving.

Vehicle layout allows easy access to all service points, all daily checks can be done from the ground level.

Technical performances indicated in this document are valid at sea level.

Pictured machine may include options and additional equipment.


Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606



Tier 4f


LIFTING PLATFORM

Dimensions 2000 X 4000 mmLifting capacity 4500 kgMax. Lifting height 4500 mmSide shifting 550 mmTilt +/-8ºDiesel start/stop from platformBattery operated emergency pump

ENGINE

Liquid cooled turbo charged Cummins QSB 4.5, 119 kW/2300 rpm, TIER 4f approvedEngine brakeRequires DEF (urea) and ultra-low sulphur diesel (ULSD) (maxsulphur content < 15 ppm)

EXHAUST AFTER TREATMENT SYSTEM

EGR ( Exhaust Gas Recirculation), DOC (Diesel OxidationCatalyst) and SCR (Selective Catalytic Reduction)

TRANSMISSION

Dana 24 000 series power shift with pump drive group3 speeds forward and reverse4-wheel driveLock up turbine

AXLES

Planetary typeDana 123Load end axle fixedEngine end axle oscillation +/- 10°

TYRES

12.00 - 20 PR 20

PERFORMANCE

1st gear max. 6 km/h2nd gear 12 km/h3rd gear 28 km/hMax. tractive effort 132 kNMax speed in 1:7 inclined tunnel 9 km/hPerformance curve 100087562

BRAKES

Service brake: hydraulically powered dual-circuit oil immersed multidisc brakes in both axles

Safety/Parking brake: spring applied hydraulically released fail-safe -type brake. Brake testing possible from cabin

STEERING

Hydraulic frame steeringOrbitrol type Frame articulation +/- 40°

FUEL TANK

Capacity 112 L

DEF TANK

Diesel Exhaust FluidCapacity 18.9 L

HYDRAULIC SYSTEM

Variable displacement pump system, 190 bar, 95 L/min/2200 rpmHydraulic oil tank capacity 115 LReturn oil filtration 10 μmIndication of level, filtration and temperature

24 VDC ELECTRICAL SYSTEM

Exposed components are min IP 65 standardBattery 2 x 115 AhAlternator 100 ADriving halogen lights (4 + 2 pcs) 70 WHalogen work lights (2 + 2 pcs) 70 WHalogen work lights on lifting platform (4 pcs) 70 WLED parking, brake and indicator lightsLED side lights; amberSide reversing halogen lights 70 W Rotating beacon; amberWire harness (self extinguishing) with tinned wires and water tight conduits

DRIVER’S COMPARTMENT

Open 2-man cabin FOPS/ROPS approvedAir suspended driver’s seatSeat with retractable lap seat beltForward and side seating for the driver with twosets of pedals (brake and accelerator)MID 070 S Multifunctional Display with: • Meters; e.g. speed, RPM, operating hours • Status indicators; e.g. fluid levels, temperatures,

pressures, alarms, faults

GREASING SYSTEM

Centralized grease fittings for the carrier

OTHER

12 kg hand held fire extinguisherStandard symbol labelsSupport legs at the load endSupport legs at the engine end

Technical specification


Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606



Tier 4f


LIFTING PLATFORMS

2400 X 4000:• Side shifting 650 mm• Lifting capacity 4500 kg• Tilt +/- 8ºTurning radius:• Outer 6660 mm• Inner 3700 mm2400 X 5200:• Side shifting 650 mm• Lifting capacity 4000 kg• Tilt +/- 8ºTurning radius:• Outer 7200 mm• Inner 3700 mm

DRIVER’S CABIN

Enclosed cabin, FOPS/ROPS Air suspended T-back seat for driver and passenger

OTHER

LED driving lights (4 + 2 pcs) 18 WLED work lights on cabin (2 + 2 pcs) 43 WLED work lights on work platform (4 pcs) 18 WWarning lights, 1 unit: • Rotating beacon; red • Rotating beacon; blue

Optional equipment Additional equipment

FOR LIFTING PLATFORMS

Hydraulic pipe jacks:• Lifting capacity 350 kg• Stroke length 600 mm• Pipe diameter 70 - 273 mm or pipes with a nominal

value from 2½'' to 20''Hydraulic pipe jacks with tilt:• Lifting capacity 350 kg• Stroke length 450 mm• Tilt +23º...+45º• Pipe outer diameter 70 - 273 mm or pipes with a nomi-

nal value from 2½'' to 20''Crane Hiab 029T:• Lifting capacity 12 kNm, 350 kg/3,4 m• Max platform capacity with crane 2300 - 3000 kg• Max platform capacity 2100 kg, with 900 kg rated

loading of the crane• Crane only available with 2400 x 5200 platformGrapple for crane:• Min. pipe diameter 70 mm• Max. opening 1100 mm• Compressive force 6,4 kN• Radio remote control• Rotator for grappleSliding safety roof, (FOPS approved)Fan rack

HIGH VOLTAGE ELECTRICAL SYSTEM

Electro-hydraulic power pack 15 kW:400 V / 50 Hz with 50 m cable and hydr. reel440 V / 60 Hz with 50 m cable and hydr. reel690 V / 50 Hz with 50 m cable and hydr. reel1000 V / 50 Hz with 50 m cable and hydr. reel

SUSPENSION

Front axle suspension

FOR ENCLOSED CABIN

CD/Radio systemCabin ventilation:• Cabin heating • Air conditioning


Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606



Tier 4f


FIRE SUPPRESSION SYSTEM

Fogmaker: Manually actuated Fogmaker: Automatically actuatedAnsul: Manually actuatedAnsul: Automatically actuatedTempus: Manually actuated

GREASING SYSTEM

Automatic lubrication system for carrier and lifter: Lincoln

OTHER

Fast fuel filling system: WigginsOil evacuation kit with sample pointsExtra hand held fire extinguisher (12 kg) Warning lights, 1 unit: • Rotating beacon; amber• Rotating beacon; red • Rotating beacon; blue • Strobe light; white

Text labels in: Fin / En / Por / Swe / Rus / Nor / Ger / Fra / Spa/ ItaToolbox and maintenance tools2 wheel chocks with bracketsReversing cameraSpare wheel with tyreWLAN connection

Additional equipment


Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606



Tier 4f


OPERATIONAL SPARE PARTS

A complete parts package to ensure your machine runs with optimal uptime.

After commissioning of your new Normet equipment, the following maintenance & critical spares are typically recom-mended to support and service your machine:

• Filters, belts• Sensors, work lights, solenoid coils and fuses • Sliding parts, bearings, cylinders, seals & pins• Hoses including concrete, charging & hydraulic• Nozzles & tips• TamCrete EasyClean – nontoxic protective agent • Pistons and seal kits• Guide rollers and bushes

Note: The usage and consumption of parts may vary depend-ing on the operating environment.

EXTENDED WARRANTY

Standard Normet equipment warranty is 2000 operation hours or 12 months (whichever is reached first). Extended war-ranty for your Normet equipment can be provided with service agreement– conditions apply.

TRAINING AND EXPERTISE SERVICES

Need training before your machine goes into service or any stage during its working life? The Normet Academy and our highly skilled technicians can provide all your expert training needs including…

Product training:Operation and MaintenanceAutomation –NorSmart/Nordoser Electric, hydraulic and mechanical fundamentalsTrouble-shooting and fault finding

Process & operator improvement audit for:Concrete spraying – practical or simulatedChargingScaling - practical or simulated

Audit services to improve:Equipment performance, machine availability, safety & quality.

SERVICE AGREEMENTS

Parts supplyPeriodic fleet inspectionPreventative maintenanceMaintenance SupervisionFleet availability

Service

ELECTRONIC MANUALS

LinkOne electronic spare parts and instruction manuals

EQUIPMENT - COMMISSIONING & START UP SERVICES

Operator Training• Class room training• Practical training

Maintenance & Repair Training• Class room training• Practical training

Commissioning• Receiving inspection


Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606



Tier 4f


Dimensions

SIDE VIEW

Basic machine with 2000 X 4000 Platform

SIDE VIEW

Machine with options

TOP VIEW


Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606



Tier 4f


Dimensions

DIMENSIONS

Length 8800 mmWidth 2000 mmHeight 2650 mmWheel base 3770 mmTrack 1650 mmGround clearance as shown 230 mm

TURNING RADIUS

Outer 6700 mmInner 4050 mm

WEIGHT

Operating 13 100 kg

TOP VIEW

With 2400X5200 platform

SIDE VIEW

Machine with 2400X5200 platform

SIDE VIEW

Machine with crane and tiltable pipe lifters


Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606



Tier 4f


Dimensions

TURNING RADIUS


TURNING RADIUS



Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606



Tier 4f


Dimensions

LIFTING HEIGHT

TURNING RADIUS



Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606



Tier 4f


Dimensions

CRANE REACH


Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606



Tier 4f


Tractive efforts

CUMMINS QSB 4.5, 119 kWPerformance curve 100087562

utilift mf 540 02.05 - normet · the utilift mf 540 scissor lift with lifting capacity up to 4.5...

Documents