usg translucents canopies ceiling panels data ic596
TRANSCRIPT
EclipsE Panels with ClimaPlus Superior Performance/Donn Brand FinElinE Suspension System
Translucents™ Canopies
Translucents Canopies Features and Benefits– Pre-formed curved panels.– Available in twenty décors and twenty-four color gallery colors. – Whimsical elegance for retail, office, health care or hospitality environments.– Three easy-to-use elements; wave, vault or valley.– Individual suspension or connected groupings for ribbons or larger spaces. – Greater design flexibility in combination with Transluscents™ Lay-In Panels. – Sophisticated hardware for perfect fit and finish.– Four simple connection/suspension points for fast, trouble-free installation. – Preformed canopies—no additional hardware or field adjustments necessary. – Translucents encapsulated panels have a minimum of 40% recycled content. – Acrylic canopies have up to 50% recycled content.– 100% recyclable material; may contribute toward LEED credits in
MR 2.1, 2.2, 4.1 and 4.2.
Applications– Gaming– Hospitality– Healthcare– Retail– General office
See LEED report tool at usgdesignstudio.com for detailed sustainability information.
Natural
Natural Leaves™ Searchlight™ Paper Leaf™
Woodland Print™
Woven
Luna Ice™ Artichoke™ Iris™ Butterscotch™
Textiles
Mandarin Iridescent™
White Fiberoptic™ Matrix II™ Avanti™
Meander Lipstick™
Meander White™
Beige Interlock™
Cache White™
White Mesh™
Embossed Metallic Color Gallery
Ovalesque Frost™ Rain™
Silver Spun™
To order samples, go to usg.com See IC603 for Color Gallery availability.
New! See IC603 for 24 new colors.
Product Information
Shape
Typical Sizes System Weight
Wave 2'x6' 23-3/8"x65-3/8" Approximately 2 lbs./sq. ft.
Vault 2'x6' 23-3/8"x68-1/2" Approximately 2 lbs./sq. ft.
Valley 2'x6' 23-3/8"x68-1/2" Approximately 2 lbs./sq. ft.
Acoustics This product does not offer any acoustical properties.
Elements Translucents™ Canopies can be suspended under the standard troffers normally located in a suspended ceiling or can be lit from above with point-source lighting such as halogen par lamps or newer LED technology.
Perspective
Product literatureData sheet: IC596
Online toolsusgdesignstudio.com
This product is produced to order and will vary from batch-to-batch — panels ordered at the same time will be produced together and will be identical. USG cannot guarantee batch-to-batch consistency.
Code approvalTranslucents panels meet Class B requirements for flame spread and smoke developed as defined by ASTM 1264 and as tested in accordance with ASTM E84. (40/175) USG Translucents panels also meet Class A requirements of NFPA and IBC (UBC) as interior finishes, not to be part of an air supply/return system. Designers and installers are advised to consult a fire protection engineer, NFPA 13 and their local codes for guidance where automatic fire detection and suppression systems are present.
Seismic applicationsFor installations on projects designated seismic design category C-F, suspension wires that are a minimum of no. 12 gauge galvanized, soft-annealed, mild steel wire shall be used. Please refer to SC2494 for more information about the seismic guidelines for specialty and decorative ceilings. Because codes continue to evolve, check with a local official prior to designing and installing a ceiling system. Other restrictions and exemptions may apply.
For More Information
WeightApproximately 2 lbs./sq.ft. (Woven, Textiles, Shimmer, Natural, Industrial, Embossed)
Recycled content100% recyclable.Woven, Textiles, Shimmer, Natural, Industrial panels: min. 40% recycled content, 100% recyclable. Embossed panels: 50% recycled content, 100% recyclable. Color Gallery: Up to 40% recycled content.
Nominal Actual (in plan)
Vault Valley Wave
Panel Joiner
Mounting at Structure
Cable Panel Attachment
Escutcheon for suspended ceiling panel
To order samples/literature:Web: usg.comE-mail: [email protected]: 888 874.2348
Technical Services: 800 USG.4YOU (800 874.4968)
Websites: usg.comusgdesignstudio.com
For the most up-to-date technical information:
usgdesignstudio.com
Safety First! Follow good safety/industrial hygiene practices during installation. Wear appropriate personal protective equipment. Read MSDS and literature before specification and installation.
Manufactured by USG Interiors, LLC550 West Adams StreetChicago, IL 60661
The trademarks Translucents™, Woven™, Shimmer™, Industrial™, Natural™, Embossed™, Textiles™, the USG Logo™ and related marks are trademarks of USG Corporation or its subsidiaries or affiliates.
The color names listed herein are trademarks of Lumicor, Inc. and are used with permission.
IC596/rev. 11-13© 2013 USG Interiors, LLCPrinted in U.S.A.
Translucents™ Canopies