user’s manual - hpfi.com · user’s manual powerflex tripod tripodum042914. product...
TRANSCRIPT
Product specifications subject to change without notice
High Point Furniture Industries • 1104 Bedford Street • High Point, NC 27263 • t 800.447.3462 • f 800.231.6784 • www.hpfi.com
PowerFlex™ Innovative Power + Data Solutions 8
1 PowerFlex™ Innovative Power + Data Solutions
High Point Furniture Industries • 1104 Bedford Street • High Point, NC 27263 • t 800.447.3462 • f 800.231.6784 • www.hpfi.com
Product specifications subject to change without notice
User’s Manual
PowerFlex Tripod
Tripod
UM04
2914
Product specifications subject to change without notice
High Point Furniture Industries • 1104 Bedford Street • High Point, NC 27263 • t 800.447.3462 • f 800.231.6784 • www.hpfi.com
PowerFlex™
Innovative Power + Data Solutions 2
Table of Contents
I. Introduction 3
Who We Are 3
Product Overview 3
Caution &Warnings 4
II. Quick Start Guide 5
III. Installation & Operations 5
IV. Appendix 6
Specifications 6
Item Numbers 7
Warranty 7
7 PowerFlex™
Innovative Power + Data Solutions
High Point Furniture Industries • 1104 Bedford Street • High Point, NC 27263 • t 800.447.3462 • f 800.231.6784 • www.hpfi.com
Product specifications subject to change without notice
Item Numbers
Warranty
This Tripod product is warranted for a period of one (1) year from the date
of purchase.
This warranty is null and void in the case of abuse, uses outside its normal
intended use, or field modifications made in any manner.
Tripod unit with 9 power connections and 6 active USB ports, 108” cord.
Item Number Color
ECIB Glossy Black
ECIS Silver Pearl
ECIW Glossy White
Product specifications subject to change without notice
High Point Furniture Industries • 1104 Bedford Street • High Point, NC 27263 • t 800.447.3462 • f 800.231.6784 • www.hpfi.com
PowerFlex™
Innovative Power + Data Solutions 6
Appendix
Specifications
Power Requirement: 120 VAC, 12A
Certification: ETL Certified
Weight: 25 pounds
Measurements: 25.50” tall x 18.00” at the widest point
9 Tamper Resistant receptacles
6 Active USB charging ports.
9’ Power cord.
Circuit breaker for overload protection.
No-Slip rubber feet provide 0.75” floor clearance.
Magnetic catch secures cord when not in use.
Recesses in base allow Tripod to be tucked up close with floor boxes
when plugged in.
Slots in the base allow unit to be tethered to the floor or a pole if sta-
tionary application is desired.
Tri-core design allows for 360 degree power access.
3 PowerFlex™
Innovative Power + Data Solutions
High Point Furniture Industries • 1104 Bedford Street • High Point, NC 27263 • t 800.447.3462 • f 800.231.6784 • www.hpfi.com
Product specifications subject to change without notice
Introduction Congratulations on your purchase of the HPFI PowerFlex Tripod. This
product is ideal for any environment where competition for traditional
wall power outlets is a challenge.
Who We Are
High Point Furniture Industries was founded in 1958 and remains a pri-
vately held, veteran-owned business. The first products were novelty
furniture items for the home (TV stands, record cabinets). High Point
entered the office furniture market in 1963 with the introduction of the
first budget-priced wood desk, 100 Series. Up to that point, low-cost
desks were made primarily of metal; wood desks were significantly more
expensive. Today, our operations include two manufacturing facilities
with over 440,000 sq. ft. in High Point, NC where we produce 19 different
series of veneer and laminate casegoods and over 60 series of reception,
office and healthcare seating products.
Product Overview
The Tripod incorporates nine-120v 15 Amp tamper resistant power recep-
tacles and six low voltage, (5 Volt DC), active USB ports. Capable of being
relocated at will, the six rubber feet prevent sliding and provide clearance
and stability on uneven surfaces or over floor boxes. In the event you
would like the unit applied in a more permanent setting, mount or tether
points are accessible on the bottom of the unit. When the Tripod is not in
use the cord stores seamlessly in the base and is held in place by the
magnetic catch.
Product specifications subject to change without notice
High Point Furniture Industries • 1104 Bedford Street • High Point, NC 27263 • t 800.447.3462 • f 800.231.6784 • www.hpfi.com
PowerFlex™
Innovative Power + Data Solutions 4
Cautions & Warnings
WARNING: FAILURE TO FOLLOW CAUTIONS AND WARNINGS BE-
LOW COULD RESULT IN ELECTRICAL SHOCK, FIRE, PROPERTY
DAMAGE, PERSONAL INJURY OR DEATH.
Cautions:
Read Instructions · Read all warnings and operating instructions
before using.
Retain Instructions · Retain this Owner’s Manual for future use.
Never use in a wet environment. Never allow liquid of any kind to
spill onto or enter any part of the product.
Follow Warnings· Read and follow all warnings and instructions in
this Owner’s Manual and marked on Equipment.
Service · There are no user serviceable parts in this product unless
described in the following pages. Do not open or modify this prod-
uct in any manner.
Warnings:
Power Source · This product is only to be operated from the power
source indicated on the product. Use only with a grounded (neutral)
conductor. For safety do not bypass or disable the third (grounding)
pin.
Power Disconnection · To remove powered devices safely grasp de-
vice plug and pull straight from powered outlet. Do not pull on de-
vice cord or remove plug from any angle other than straight from
outlet. Never touch metal conductors on plug during connecting or
removal from product.
Power Cord · Route products power cords where they will not be
stepped on, pinched, have devices placed on them or become a
tripping hazard. Never allow power cords to sit in any liquid or get
wet in any manner.
Location · This product is intended to be used in a dry environment
only.
5 PowerFlex™
Innovative Power + Data Solutions
High Point Furniture Industries • 1104 Bedford Street • High Point, NC 27263 • t 800.447.3462 • f 800.231.6784 • www.hpfi.com
Product specifications subject to change without notice
Quick Start Guide
HPFI invested a great deal of time ensuring that the user experience with
the Tripod is a satisfying one. Installations are fast and easy, remove the
Tripod from its package, place the unit where desired, uncoil enough cord
to reach your wall or floor outlet and plug in the Tripod. It is that simple to
get started with this flexible power Tripod!
Installation & Operation
1. Remove the Tripod from its packing.
2. Place Tripod at location for use. Tripod can be plugged into a power
source from either a floor or wall location. (Note: Ensure cord doesn’t
become a tripping hazard when in use.)
3. Disengage the magnetic catch and uncoil cord from base and plug
into power source. Uncoil only as much cord as needed to make a safe
connection.
4. Plug power or USB devices into the Tripod as needed.
5. To store the unit, wind the cord between the base plates and engage
the magnetic catch to the top plate.