user manual prime minister awas yoajana (mobile application) ministry of urban development · 2018....

User Manual: Mobile Application for Prime Minister Awas Yojana

User Manual

Prime Minister Awas Yoajana

(Mobile Application)

Ministry of Urban Development (Last Updated on 18 December 2017)

Prepared By

National Informatics Centre

Department of Information Technology

Ministry of Communications and Information Technology

Govt. of India


Contents

How to install the app _______________________________________________________3

Starting the application ______________________________________________________3

Logging into the Application __________________________________________________4

ISSR Menu Option _________________________________________________________7

AHP Menu Option _______________________________________________________11


How to install the app

a. Download the APK file from concerning site or mail as

received. If you have downloaded the APK on a computer, then

you need to transfer it to your Smartphone using USB cable.

Once you have the APK on your mobile, you need to install it. b. Make sure that the first selection, Unknown Sources, is checked

(on some phones, this might be under Settings->Security). This

is to allow you to download an application that is not part of the

Android market. c. Once the installation is done, you can use the application.

Starting the application

To start the PMAwas Yojana application, follow the steps given below:

a. Click on PMAwas Yojana icon in application menu.


b. Click on PMAwas Yojana icon, the application starts and displays splash screen.

Logging into the Application:

To Log in to the PMAwas Yojana application and use the

features provided in it, follow the steps given below:

a. Start the PMAwas Yojana application. b. After the Login page is displayed, enter valid Mobile Number

(Mobile number registered with login account) along with

Login ID provided and press ‘Submit’ button.


c. If mobile number and login id are valid, then application

would ask you to enter the OTP Number that has received to

registered mobile number.

d. User would have received the OTP Number by SMS on phone

(Registered mobile number).

e. Enter the received OTP number and press submit button.


f. If the user has entered OTP number correctly then

‘Authenticated’ message would be displayed and

State/District/City details corresponding to the user login id

would be displayed in the Dash Board.

g. On the Dashboard User sees the Options ISSR, AHP in the

middle of the screen and Logout option at the bottom left

corner.

h. User can choose any of both in the options ISSR or AHP so

that respective project details will be shown.


ISSR Menu Option

a. Click on ISSR folder to see the details of state, district, and city details to which the user is associated with and a drop down for list of projects.

b. Choose one Project from list of projects displayed in the

drop down list by clicking on drop down box (Select Project).


c. Then the corresponding project details will be shown on the screen with a Capture Image button as shown below.

d. Click on the CAPTURE IMAGE button to click picture using

camera or choose from gallery (which should be taken along with lat/long points) button.


e. If user captured picture from camera option and clicks image then user can see the picture on the screen with lat/long points on the picture as painted and SUBMIT button would also be displayed as shown below.

f. Once the captured image has been displayed on the screen

and user can submit by clicking on the SUBMIT button, where an alert dialog open and prompts for confirmation of updating the photo for selected project.


g. Click on Upload Photo for submitting the photo with lat/long values and other details of the project.

h. If the record updated successfully then user gets a message

as ‘record updated successfully’ and redirected to the project selection page.


AHP Menu Option

a. Click on AHP folder to see the details of state, district, and city details to which the user is associated with and a drop down for list of projects.

b. Choose one Project from list of projects displayed in the

drop down list by clicking on drop down box (Select Project).


c. Then the corresponding project details will be shown on

the screen with a Capture Image button as shown below.

d. Click on the CAPTURE IMAGE button to click picture using

camera or choose from gallery (which should be taken along with lat/long points) button.


e. If user captured picture from camera option and clicks

image then user can see the picture on the screen with lat/long points on the picture as painted and SUBMIT button would also be displayed as shown below.

f. Once the captured image has been displayed on the screen

and user can submit by clicking on the SUBMIT button, where an alert dialog open and prompts for confirmation

of updating the photo for selected project.


g. Click on Upload Photo for submitting the photo with

lat/long values and other details of the project.

h. If the record updated successfully then user gets a message as ‘record updated successfully’ and redirected to the project selection page.


Choose Image From Gallery Option: If the user has selected the option from Gallery while

capturing the image then two things possible: 1).If image is valid(contains lat/long values with the image)then user can upload successfully. 2). Otherwise, user gets a message as ‘invalid photo’ and capture image button will be there as shown below.

user manual prime minister awas yoajana (mobile application) ministry of urban development · 2018....

Documents