user manual - philips...3139 246 13783 1 dvd/sacd video player dvp9000s user manual thank you for...

3139 246 13783

1

DVD/SACD VIDEO PLAYER DVP9000S

User manual

Thank you for choosing Philips.

Need help fast?Read your User’s Manual first for quick tips that make using your Philips product more enjoyable. If you have read your instructions and still need assistance, you may access our online help at www.philips.com/support

01-39 DVP900_69_Eng3 20/01/2005, 4:22 PM1

3139 246 13783

2

General Information

LASERType Semiconductor laser

GaAlAsWave length 650 nm (DVD)

780 nm (VCD/CD)Output Power 7 mW (DVD)

10 mW (VCD/CD)Beam divergence 60 degree

For Customer Use:

Read carefully the information located atthe rear of your DVD Player and enterbelow the Serial No. Retain thisinformation for future reference.

Model No. DVP 9000SSerial No. _______________

Environmental InformationAll unnecessary packaging has beenomitted. The packaging has been madeeasy to separate into three materials:cardboard (box), polystyrene foam(buffer) and polyethylene (bags, protectivefoam sheet).

Your DVD player consists of materialswhich can be recycled and reused ifdisassembled by a specialized company.Please observe the local regulationsregarding the disposal of packagingmaterials, exhausted batteries and oldequipment.

“DCDi” is a trademark ofFaroudja, a division ofGenesis Microchip, Inc.

CAUTION(WARNING LOCATION: ON THEBACKPLATE OF THE SET)

NEVER MAKE OR CHANGECONNECTIONS WITH THEPOWER SWITCHED ON.

Laser safety

This unit employs a laser. Due to possibleeye injury, only a qualified service personshould remove the cover or attempt toservice this device.

NOTE:PICTURES SHOWN MAY BEDIFFERENT BETWEENCOUNTRIES.

‘CONSUMERS SHOULD NOTE THAT NOTALL HIGH DEFINITION TELEVISION SETSARE FULLY COMPATIBLE WITH THISPRODUCT AND MAY CAUSE ARTIFACTSTO BE DISPLAYED IN THE PICTURE. INCASE OF 525 OR 625 PROGRESSIVE SCANPICTURE PROBLEMS, IT IS RECOMMENDEDTHAT THE USER SWITCH THECONNECTION TO THE ‘STANDARDDEFINITION’ OUTPUT. IF THERE AREQUESTIONS REGARDING YOUR TV SETCOMPATIBILITY WITH THIS MODEL 525pAND 625p DVD PLAYER, PLEASE CONTACTOUR CUSTOMER SERVICE CENTER.’

Important Note:Due to the numerous versions of newCD-Audio copy protection orenhanced CD-Audio protectionrecently available on certain discs,Philips is unable to guarantee thatthis DVD Player is fully compatiblewith such new discs. Should you havedifficulty playing any such CD-Audiodiscs, kindly refer them to your CD-Audio disc retailer.

The apparatus shall not be exposed to drippingor splashing and that no objects filled withliquids, such as vases, shall be placed onapparatus.

Manufactured under license from DolbyLaboratories “Dolby”, “Pro-Logic” and thedouble-D symbol are trademarks of DolbyLaboratories.

01-39 DVP900_69_Eng3 20/01/2005, 4:22 PM2

Español ------------------------------------ 40

English --------------------------------------- 8

Index

------------------------------- 114

------------------------------- 150

Bahasa Melayu -------------------------- 186

Português --------------------------------- 76

En

gli

shE

spa

ño

lP

ort

ug

uê

sB

ahas

a M

elay

u

01-39 DVP900_69_Eng3 20/01/2005, 4:22 PM3

3139 246 13783

En

glish

4

IntroductionSupplied accessories ....................................... 6Care and safety information .......................... 6

ConnectionsConnecting TV .............................................. 7-9

Using Composite Video jack (CVBS) ......... 7Using S-Video jack .......................................... 7Using Component Video jacks (Pr Pb Y) ... 8Scan Mode (Progressive/Interlace selector)............................................................................ 8Using an accessory RF modulator .............. 9

Connecting the power cord .......................... 9Optional: Connecting to a HDMI/DVI Device........................................................................... 10

Using HDMI (High Definition MultimediaInterface) sockets ......................................... 10

Optional: Connecting to a Multi-channelReceiver ........................................................... 11

Receiver has multi-channel audio input jack.......................................................................... 11

Optional : Connecting to an Audio System . 11Stereo has Dolby Pro Logic or Right / LeftAudio In jacks ................................................ 11

Optional: Connecting to a Digital Receiver .. 12Receiver has a PCM, Dolby Digital, orMPEG2 decoder ............................................ 12

Functional OverviewFront Panels .................................................... 13Rear Panels ...................................................... 14Remote Control ............................................ 15

Getting StartedStep 1: Inserting batteries into theRemote Control ............................................ 16

Using the Remote Control to operate thePlayer ............................................................... 16

Step 2: Setting up the TV ........................ 16-17Selecting the color system that correspondsto your TV ...................................................... 17Selecting the TV Shape ................................ 17

Step 3: Setting language preferences ......... 18Setting the Menu Language ......................... 18Setting the Default Audio and DefaultSubtitle languages .......................................... 18

Step 4: Setting the speakers’ channels ....... 19Advance Bass Management ........................ 19– Movie Mode .............................................. 19– Music Mode ............................................... 19

Disc OperationsPlayable Discs ................................................. 20Region Codes ................................................. 20Playing discs ..................................................... 21Display on LCD .............................................. 21Using the Disc Menu ..................................... 21Playback controls ..................................... 22-25

Pausing playback ............................................ 22Selecting a title (track) /chapter ................ 22Zoom .............................................................. 22Resuming playback from the last stoppedpoint ................................................................ 22Shuffle .............................................................. 22Repeat ............................................................. 23Repeat A-B ..................................................... 23Scan .................................................................. 23Time Search ................................................... 23Slow Motion .................................................. 24Searching ......................................................... 24Still Picture and Frame-by-frame playback . 24Program playback ......................................... 25

Special DVD features .................................... 25Selecting a Title ............................................. 25Camera Angle ................................................ 25Changing the Audio Language .................... 25Subtitles .......................................................... 25

Special VCD & SVCD Features ................... 26Playback Control (PBC) .............................. 23Preview .................................................... 23-24

Playing MP3/JPEG/Kodak Picture CD ........ 26Special features for picture disc playback .......................................................................... 26-27

Slide show playback setting ........................ 26Rotating the picture ..................................... 26Zoom picture ................................................ 27Playback with multi-angles .......................... 27Scan Effect ...................................................... 27JPEG and MP3 simultaneous playback ...... 27

Contents

01-39 DVP900_69_Eng3 20/01/2005, 4:22 PM4

3139 246 13783

En

gli

s h

5

DVD Menu OptionsPreferences ............................................... 28-31

Picture ............................................................. 28– Color Settings ........................................... 28– Saturation/ Contrast/ Brightness ......... 28– Sharpness ................................................... 28– Video Shift .................................................. 28Advance Picture ..................................... 29-30– TrueLife ....................................................... 29– DCDi .......................................................... 29– Gamma ....................................................... 29– Chroma Delay .......................................... 29– 4:3 Aspect .................................................. 29– HiVideoDef ............................................... 29– Content Mode .......................................... 30Sound .............................................................. 30– Night Mode ............................................... 30– Analog Output .......................................... 30– CD Up-sample .......................................... 30– Clear Voice ................................................ 30– Karaoke Vocal ........................................... 30Features .......................................................... 31– Wakeup timer ........................................... 31– Helpline ...................................................... 31– Status Window ......................................... 31– Dimmer ...................................................... 31

Setup ........................................................... 31-35Language ......................................................... 32– Menu Language ......................................... 32– Default Subtitle/ Default Audio ............ 32– Country ..................................................... 32TV .................................................................... 32– TV System .................................................. 32– TV Shape .................................................... 32Audio Menu ............................................. 32-33– Digital Output .......................................... 32– Subwoofer frequency .............................. 33– SACD Direct ............................................ 33– HDMI Audio .............................................. 33– PCM Output ............................................. 33

Contents

Speakers (Advance Bass Management) .... 33Features .......................................................... 33– PBC (Playback Control) ......................... 33– Sleep Timer ............................................... 33Access ...................................................... 34-35– Enter PIN ................................................... 34– Parental Level ..................................... 34-35– Change PIN ............................................... 35– Disc Lock ................................................... 35

Troubleshooting ......................... 36–37

Specifications ...................................... 38

Glossary ......................................................................39

01-39 DVP900_69_Eng3 20/01/2005, 4:22 PM5

3139 246 13783

En

glish

6

Care and safety information● Power consumption

– When the system is switched toStandby mode, it is still consuming power.To disconnect the system from the powersupply completely, remove the AC powerplug from the wall jack.

Supplied accessories

Remote Controland two AAbatteries

Audio cable(white, red)

Composite videocable (yellow)

Introduction

● Avoid high temperatures, moisture,water and dust– Do not expose the player, batteries ordiscs to humidity, rain, sand or excessiveheat (caused by heating equipment ordirect sunlight).

● Avoid condensation– The lens may cloud over when theplayer is suddenly moved from cold towarm surroundings, making it impossibleto play a disc. Leave the player in thewarm environment until the moistureevaporates.

● Do not block the vents– Do not operate the DVD Player in anenclosed cabinet. Allow about 10 cm (4inches) of free space around the player foradequate ventilation.

10 cm(4 inches)

10 cm(4 inches)

10 cm(4 inches)

PHILIPS

● Care of the cabinet– Use a soft cloth slightly moistened witha mild detergent solution. Do not use asolution containing alcohol, spirits,ammonia or abrasives.

● Finding a suitable location– Place the player on a flat, hard, andstable surface.

● Disc handling– To clean a CD, wipe it in astraight line from the centertoward the edge using a soft,lint-free cloth. A cleaningagent may damage the disc.– Write only on the printedside of a CD-R/CD-RW and only with asoft felt-tipped pen.– Handle the disc by its edge; do nottouch the surface.

Component videocables(yellow, red, white)

AC power cable

01-39 DVP900_69_Eng3 20/01/2005, 4:22 PM6

3139 246 13783

En

gli

s h

7

Connections

Connecting TV

S-VIDEO

YPbPr

MIXED 2CH MAIN

CENTER

SUB WOOFER6CH DISCRETE

SURROUND

L L

R

L

R

COMPONENT

CAN MODE

INTERLACEPROGRESSIVE

VIDEOVIDEO OUT

PCM / DIGITAL/DTS / MPEG

COAXIAL OPTICAL

DIGITAL OUT

R

AUDIO OUT

AUDIO IN

Pr/Cr

Pb/Cb

Y

S-VIDEOIN

VIDEO IN

COMPONENTVIDEO IN

AUDIO IN

Pr/Cr

Pb/Cb

Y

S-VIDEOIN

VIDEO IN

COMPONENTVIDEO IN

IN

IN

31

2

Back of TV

IMPORTANT!– You only need to make one videoconnection from the followingoptions, depending on thecapabilities of your TV.– Connect the DVD Player directlyto the TV.

Using Composite Video jack(CVBS)

1 Use the supplied composite video cable(yellow) to connect the DVD Player’syellow VIDEO OUT (CVBS) jack tothe VIDEO IN jack (labeled as Video In,Composite, CVBS, or Baseband) on theTV (cable supplied).

2 Set the SCAN MODE switch toINTERLACE.

3 To hear the sound of this DVD Playerthrough your TV, use the audio cables(white/red) to connect AUDIO OUT (L/R) jacks of the DVD Player to thecorresponding AUDIO IN jacks on the TV(cable supplied).

S-VIDEO

YPbPr

MIXED 2CH MAIN

CENTER


SURROUND

L L

R

L

R

COMPONENT

SCAN MODE


VIDEOVIDEO OUT


COAXIAL OPTICAL

DIGITAL OUT

R

AUDIO OUT

AUDIO IN

Pr/Cr

Pb/Cb

Y

S-VIDEOIN

VIDEO IN

COMPONENTVIDEO IN

AUDIO IN

Pr/Cr

Pb/Cb

Y

S-VIDEOIN

VIDEO IN

COMPONENTVIDEO IN

IN

IN

31

2

Back of TV

IMPORTANT!– S-Video provides better picturequality. This option must be availableon your TV.

Using S-Video jack

1 Use the S-video cable to connect theDVD Player’s S-VIDEO OUT jack to theS-Video in jack (labeled as Y/C or S-VHS)on the TV (cable not supplied).

2 Set the SCAN MODE switch toINTERLACE.

3 To hear the sound of this DVD Playerthrough your TV, use the audio cables(white/red) to connect AUDIO OUT(L/R) jacks of the DVD Player to thecorresponding AUDIO IN jacks on the TV(cable supplied).

01-39 DVP900_69_Eng3 20/01/2005, 4:22 PM7

3139 246 13783

En

glish

8

Connections

S-VIDEO

YPbPr

MIXED 2CH MAIN

CENTER


SURROUND

L L

R

L

R

COMPONENT

CAN MODE


VIDEOVIDEO OUT


COAXIAL OPTICAL

DIGITAL OUT

R

AUDIO OUT

AUDIO IN

Pr/Cr

Pb/Cb

Y

S-VIDEOIN

VIDEO IN

COMPONENTVIDEO IN

AUDIO IN

Pr/Cr

Pb/Cb

Y

S-VIDEOIN

VIDEO IN

COMPONENTVIDEO IN

IN

IN

31

2

Back of TV

IMPORTANT!– The progressive scan video qualityis only possible when using Y Pb Prand a progressive scan TV isrequired.– DO NOT connect both video andY Pb Pr to a TV, it may affect thepicture quality.

Using Component Video jacks(Pr Pb Y)

1 Use the component video cables(yellow, red, white) to connect the DVDPlayer’s Pr Pb Y jacks to thecorresponding Component video in jacks(labeled as Pr/Cr Pb/Cb Y or YUV) onthe TV (cable supplied).

2 Set the SCAN MODE switch toPROGRESSIVE.

3 To hear the sound of this DVD Playerthrough your TV, use the audio cables(white/red) to connect AUDIO OUT(L/R) jacks of the DVD Player to thecorresponding AUDIO IN jacks on the TV(cable supplied).

S-VIDEO

YPbPrCOMPONENT

SCAN MODE


VIDEOVIDEO OUT

HDMI PCM / DIGITAL/DTS / MPEG

COAXIAL OPTICA

DIGITAL OUT

Scan Mode(Progressive/Interlace selector)

This switch will change the type of signaloutput from the Component Video Outon the DVD player.

Interlace:Select this setting when connected to astandard (interlace format) TV.

Progressive:Select progressive when you have a TVthat can accept progressive signals (480/525p) to enjoy accurate colourreproduction and high quality images.

Helpful hints:– During Progressive mode, 4:3 aspectimages are distorted when TV Shape is set to‘16:9’ . Change the TV screen’s aspect ratiosettings to AUTO to avoid image distortion.(see page 29 “4:3 Aspect”).– Some TVs and projectors are notcompatible with this DVD Player. If picturedistorted during progressive signals, switchthe SCAN MODE to Interlace.

01-39 DVP900_69_Eng3 20/01/2005, 4:22 PM8

3139 246 13783

En

gli

s h

9

Connections

IMPORTANT!– If your TV only has a singleAntenna In jack (labeled as 75 ohmor RF In), you will need an RFmodulator in order to view DVDplayback on the TV. The RFmodulator is not supplied with theDVD Player. See your electronicsretailer or contact Philips for detailson RF modulator availability andoperations.

Using an accessory RF modulator

1 Use the composite video cable (yellow) toconnect the DVD Player’s CVBS jack tothe video input jack on the RF modulator.

2 Use the RF coaxial cable (not supplied) toconnect the RF modulator to your TV’sRF jack.

S-VIDEO

YPbPr

MIXED 2CH MAIN

CENTER


SURROUND

L L

R

L

R

COMPONENT

E

ERLACEGRESSIVE

VIDEOVIDEO OUT


COAXIAL OPTICAL

DIGITAL OUT

R

AUDIO OUT

~ ACMAINS

AUDIO IN

R L

VIDEOIN

TO TVANT IN

CH3 CH4

3

1 2

4

ANT INRF coaxial cable to TV

Back of RF Modulator(example only)

Antenna orCable TV signal

MIXED 2CH MAIN

CENTER


SURROUND

L L

R

L

R

TAL/G

PTICAL

UT

R

AUDIO OUT

~ ACMAINS

~ AC MAINS

AUDIO OUT

V (Pr/Cr)

U (Pb/Cb)

Y

S-VIDEOIN

VIDEO IN

COMPONENTVIDEO IN

After everything is connectedproperly, plug the AC power cordinto the power outlet.Never make or change any connectionswith the power switched on.

When no disc is loaded, pressSTANDBY ON on the DVD Playerto turn it on.

Connecting the power cord

01-39 DVP900_69_Eng3 20/01/2005, 4:22 PM9

3139 246 13783

En

glish

10

Using HDMI (High DefinitionMultimedia Interface) sockets

● HDMI connects untouched anduncompressed digital transmissions forthe highest and cripest sound/imagequality.

● It has plug and play capability using onlyone cable for both audio/video output.

● Use HDMI connection (cable not supplied)if you have a valid HDMI input devices(eg.; LCD/Projector/Plasma/Projection TV,or HDTV).➜ Playback starts automatically.OR

● The DVD Player’s {HIVIDEODEF} menuwill appear on the TV screen (see page 29{HIVIDEODEF}).

S-VIDEO

YPbPr

MIXED 2CH MAIN

CENT

SUB WO6CH DISC

L L

R

COMPONENT

SCAN MODE


VIDEOVIDEO OUT


COAXIAL OPTICAL

DIGITAL OUT

R

AUDIO OUT

AUDIO IN

COAXIAL

OPTICALTV/DisplayHDMI

Optional audio cable

Optional: Connecting to a HDMI/DVI Device

Connecting (Optional)

● The HDMI is backward compatible withmany DVI devices using an appropriateadaptor plug.➜ If a DVI device is connected, anadditional audio cable will be needed foraudio transmission.➜ Audio transmission is possible when{HDMI Audio} is switch to on.➜ This DVD Player will support HDCPcompliance only.

Helpful hint:– Set the SCAN MODE switch toPROGRESSIVE.

Optional: Connecting to a HDMIDevice - cont’d

Using HDMI (High DefinitionMultimedia Interface) sockets

01-39 DVP900_69_Eng3 20/01/2005, 4:22 PM10

3139 246 13783

En

gli

s h

11

Connections

Receiver has multi-channel audioinput jack

1 Select one of the video connections(CVBS VIDEO IN, S-VIDEO IN, SCART orCOMPONENT VIDEO IN) depending onthe options available on your TV.

2 Set the PROGRESSIVE/INTERLACEswitch to INTERLACE for CVBS or S-VIDEO connections.

3 Set the PROGRESSIVE/INTERLACEswitch to PROGRESSIVE forCOMPONENT VIDEO IN connectionwith a Progressive Scan TV.

4 Use the audio cables (white/red) toconnect AUDIO OUT (Front L&R,Center, Surr L&R, Sub Woofer) jacks ofthe DVD Player to the correspondingAUDIO IN jacks on the receiver(cable supplied).

S-VIDEO

YPb

MIXED 2CH MAIN

CENTER


SURROUND

L L

R

L

R

COMPONENT

EOIDEO OUT


COAXIAL OPTICAL

DIGITAL OUT

R

AUDIO OUT

MULTICHANNEL AUDIO IN

SUBW.

AV Receiver

REARFRONT

CENTER REARFRONT

L L

R R

Optional: Connecting to a Multi-channel Receiver

Stereo has Dolby Pro Logic or Right/ Left Audio In jacks

1 Select one of the video connections toyour TV (CVBS VIDEO IN, S-VIDEO IN,or COMPONENT VIDEO IN) dependingon the options available on your TV.

2 Set the PROGRESSIVE/INTERLACEswitch to INTERLACE for CVBS or S-VIDEO connections.

3 Set the PROGRESSIVE/INTERLACEswitch to PROGRESSIVE forCOMPONENT VIDEO IN connectionwith a Progressive Scan TV.

4 Use the audio cables (white/red) toconnect AUDIO OUT (L/R) jacks ofthe DVD Player to the correspondingAUDIO IN jacks on the stereo system(cable supplied).

Helpful Hint:– For optimum stereo sound quality, alwaysconnect Left and Right channel from themulti-channel output and set [AnalogOutput] setting to ‘STEREO’, see page 30).

S-VIDEO

YPbPr

MIXED 2CH MAIN

CENTER


SURROUND

L L

R

L

R

COMPONENT

N MODE


VIDEOVIDEO OUT


COAXIAL OPTICAL

DIGITAL OUT

R

AUDIO OUT

AUDIO IN

STEREO

DIGITAL

OPTICAL

Optional: Connecting to anAudio System

01-39 DVP900_69_Eng3 20/01/2005, 4:23 PM11

3139 246 13783

En

glish

12

Connections

Optional: Connecting to a DigitalReceiver

S-VIDEO

YPbPr

MIXED 2CH

L L

R

COMPONENT

SCAN MODE


VIDEOVIDEO OUT


COAXIAL OPTICAL

DIGITAL OUT

R

AU

AUDIO IN

COAXIAL

OPTICALReceiver

OR

Receiver has a PCM, Dolby Digital,or MPEG2 decoder

1 Select one of the video connections toyour TV (CVBS VIDEO IN, S-VIDEO IN,or COMPONENT VIDEO IN) dependingon the options available on your TV.

2 Connect either the COAXIAL orOPTICAL jack of the DVD Player to thecorresponding Digital Audio In jack onyour Receiver (cable not supplied).

3 Set the DVD Player’s Digital Output toPCM-ONLY or ALL depending on thecapabilities of your Receiver (see page 32{DIGITAL OUTPUT}).

Helpful Hint:– If the audio format of the digital outputdoes not match the capabilities of yourreceiver, the receiver will produce a strong,distorted sound or no sound at all.

01-39 DVP900_69_Eng3 20/01/2005, 4:23 PM12

3139 246 13783

En

gli

s h

13

Functional Overview

Front Panel

SYSTEM MENUDISC MENUSTOPPLAYOPEN/CLOSESOUND MODEAUDIO DIRECTSTANDBY-ON

OK

DVP 9000S

STANDBY-ON B– To switch the DVD Player to Standby

mode or ON

Display– Shows the current status of the DVD

Player

IR Sensor– Point the remote control towards this

sensor

SYSTEM MENU– Access or exit DVD Player’s system menu

OK/Cursor (1 2 3 4)– Acknowledge menu selection/

– Selects an item in the menu/fast forward/backward, slow forward/

backward

OPEN/CLOSE /– Open/Close the disc tray

Disc tray– Strip lights up when playback SACDs.

SOUND MODE– LED lights up when the SOUND MODE

is applied– Selects required sound mode• for SACD: In Stop Mode, selects either a

CD Layer or SACD layer for hybrid discs.During playback, allows you to select CD,Stereo or Multi-channel (if available).

• for DVDs/VCDs: to select either Stereo,Dolby Surround-compatible, 3D sound orMulti-channel

AUDIO DIRECT– LED lights up when the AUDIO DIRECT

is applied– Switches video output on and off during

audio disc playback.

PLAY B– To start playback

STOP 9– To stop playback

DISC MENU– Enters the disc contents menu

01-39 DVP900_69_Eng3 20/01/2005, 4:23 PM13

3139 246 13783

En

glish

14

Mains (AC Power Cord)– Connect to a standard AC outlet

MULTICHANNEL AUDIO OUT(For connection to a stereo and

multichannel receiver)– center speaker, subwoofer, front and

surround speakers connection

Audio Out (Left/Right)– Connect to AUDIO inputs to a stereo TV

S-VIDEO

YPbPr

MIXED 2CH MAIN

CENTER


SURROUND

L L

R

L

R

COMPONENT

SCAN MODE


VIDEOVIDEO OUT


COAXIAL OPTICAL

DIGITAL OUT

R

AUDIO OUT

~ ACMAINS

HDMI (High DefinitionMultimedia Interface)– Connect to a valid HDMI device (eg.;

LCD/Projector/Plasma/Projection TV,HDTV or receiver)

SCAN MODE(Interlace/Progressive)– To switch between Progressive or

interlace

Component Y Pb Pr– Connect to Y Pb Pr input of a TV

Caution: Do not touch the inner pins of the jacks on the rear panel.Electrostatic discharge may cause permanent damage to the unit.

Functional Overview

Rear Panel

S-Video Out– Connect to S-Video input of a TV

VIDEO OUT (CVBS)– Connect to CVBS Video input of a TV

COAXIAL (Digital audio out)– Connect to the coaxial AUDIO input of a

digital audio equipment

OPTICAL (Digital audio out)– Connect to the optical AUDIO input of a

digital audio equipment

01-39 DVP900_69_Eng3 20/01/2005, 4:23 PM14

3139 246 13783

En

gli

s h

15

Functional Overview

Remote Control

AUDIO DIRECT– Switches video output on and off

during audio disc playback.SELECT

– Selects the relevant device tocontrol: DVD, RECVR, TV, DVD+RW

DIM– To select 3 different brightnesses

for the display

RETURN– Return to the previous menu on a

video CD (VCD) or some DVDs

SYSTEM MENU– Access or exit DVD Player’s system

menu

Cursor– Selects up (3), down (4), left (1) and

right (2) direction in the menuOK

– Acknowledge menu selection

S– To search or select previous chapter

or track

9 (STOP)– To stop playback

B (PLAY)– To start playback

; (PAUSE)– To pause playback temporarily /

frame-by-frame playback

REPEAT– Selects various repeat modes

REPEAT (A-B)– Repeats playback a specific section on

a discSHUFFLE

– Plays tracks/chapter in random orderSCAN

– Plays the first 10 seconds of each track/chapter within a disc

POWER B– To switch the DVD player to

standby mode or ON

LCD Screen– Indicates active source mode.

(See important note below)

Numerical keypad (0-9)/– Selects numbered items in a menu

DISPLAY– Displays information on TV screen

during playback

DISC MENU– Enters the disc contents menu

T– To search or select next chapter or

track

VOL (+ / –), MUTE andTV CH (+/-)– Not applicable for this model.

SUBTITLE– To access subtitle language system

menuANGLE– Selects a DVD camera angleZOOM– Enlarge a picture on the TV screenAUDIO– To access audio language system

menu

FTS– Activate/deactivate Favorite Track

SelectionSOUND MODE– Selects required sound mode• for SACD: In Stop Mode, selects

either a CD Layer or SACD layerfor hybrid discs.During playback, allows you toselect CD, Stereo or Multi-channel(if available).

• for DVDs/VCDs: to select eitherStereo, Dolby Surround-compatible,3D sound or Multi-channel

Important!– This RC is a Philips system remote which is capable of

controlling other Philips equipment (eg., Recorder, TVor DVD-RW player).

– Refer to manuals for other equipment as necessary.

01-39 DVP900_69_Eng3 20/01/2005, 4:23 PM15

3139 246 13783

En

glish

16

Getting Started

Step 1: Inserting batteries intothe Remote Control

1 Open the battery compartment.

2 Insert two batteries type R06 or AA,following the indications (+-) insidethe compartment.

3 Replace the cover.

Using the Remote Control tooperate the Player

1 Aim the RemoteControl directly at theremote sensor (iR) onthe front panel of theDVD Player.

2 Do not put any objectsbetween the RemoteControl and the DVDPlayer while operatingthe DVD Player.

CAUTION!– Remove batteries if they areexhausted or if the Remote Controlwill not be used for a long time.– Do not use old and new ordifferent types of batteries incombination.– Batteries contain chemicalsubstances, so they should bedisposed properly.

Step 2: Setting up the TV

IMPORTANT!Make sure you have completed allthe necessary connections. (Seepages 7-8 “Connecting TV”).

1 Turn on the TV and set it to the correctVideo-In channel. You should see the bluePhilips DVD background screen on theTV.

2 Usually these channels are between thelowest and highest channels and may becalled FRONT, A/V IN, or VIDEO. See yourTV manual for more details.➜ Or, you may go to channel 1 on yourTV, then press the Channel down buttonrepeatedly until you see the Video Inchannel.➜ Or, the TV Remote Control may have abutton or switch that chooses differentvideo modes.➜ Or, set the TV to channel 3 or 4 if youare using an RF modulator.

3 If you are using other external equipment(audio system or receiver), turn it on andselect the appropriate input source forthe DVD Player. Refer to the equipmentowner’s manual for details.

SOUNDAUDIO DIRECT

01-39 DVP900_69_Eng3 20/01/2005, 4:23 PM16

3139 246 13783

En

gli

s h

17

Selecting the color system thatcorresponds to your TV

This DVD Player is compatible with bothNTSC and PAL. In order for a DVD toplay on this Player, the color system of theDisc, the TV and the DVD Player shouldmatch.

Use ↓ or ↑ to change the values, OK to confirm, ← to leave thesubmenu

TV

TV System

TV Shape

Setup TV System

PAL

NTSC

Auto

1 Press SYSTEM MENU.

2 Press 4 to select {SETUP}.

3 Use the 1 2 3 4 keys on the RemoteControl to navigate in the menu.

Move to {TV} and press 4.Move to {TV SYSTEM} and press 2.

PAL – Select this if the connected TV hasthe PALcolor system. It will change thevideo signal of an NTSC disc and output itin PAL format.

NTSC – Select this if the connected TVhas the NTSC color system. It will changethe video signal of a PAL disc (VCD only)and output it in NTSC format.

Auto – Select this if the connected TV iscompatible with both NTSC and PAL(multi-system). The output format will bein accordance with the video signal of thedisc.

4 Select an item and press OK.

Helpful Hints:– Some image distortion occurs whenswitching NTSC and PAL mode.– AUTO will be selected during progressiveor HDMI mode.

Getting Started

TIPS: To return to the previous menu, press 1.To remove the menu, press SYSTEM MENU.

Selecting the TV Shape

Set the aspect ratio of the DVD Playeraccording to the TV you have connected.The format you select must be availableon the disc. If it is not, the setting for TVdisplay will not affect the picture duringplayback.


TV

TV System

TV Shape

Setup TV Shape

4:3 Pan Scan

4:3 Letterbox

Widescreen




Move to {TV} and press 4.Move to {TV SHAPE} and press 2.

4:3 Pan Scan➜ If you have a regularTV and want bothsides of the picture tobe trimmed orformatted to fit your TVscreen.

4:3 Letter Box➜ If you have a standardTV. In this case, a widepicture with black bands on the upper andlower portions of the TV screen will bedisplayed.

Widescreen➜ If you have a widescreen TV.


01-39 DVP900_69_Eng3 20/01/2005, 4:23 PM17

3139 246 13783

En

glish

18

Step 3: Setting languagepreferences

You can select your preferred languagesettings.This DVD Player willautomatically switch to the language foryou whenever you load a disc.

Setting the Menu Language

The On-screen language for the systemmenu will remain as you set it, regardlessof various disc languages.


Language

Menu Language

Setup Menu Language

Svenska

English

Español

Français

Português

Default Subtitle

Default Audio




Move to {LANGUAGE} and press 4.Move to {MENU LANGUAGE} and press2.

4 Select a language and press OK.

Getting Started

Setting the Default Audio andDefault Subtitle languages

You can select the audio language spokenand subtitle languages in a video disc. Ifthe language selected is not available onthe disc, the disc’s default setting languagewill be used instead.


Language

Menu Language

Setup Default Audio

Svenska

English

Español

Français

Português

Default Subtitle

Default Audio



3 Press 3 4 to highlight one of thefollowing:– {DEFAULT AUDIO} (disc’s soundtrack)– {DEFAULT SUBTITLE} (disc’s subtitles)


5 Select a language and press OK.

6 Repeat steps 3~5 for other languagesettings.

Helpful Hint:– Some discs (example Karaoke discs) arerecorded on multiple audio channels.Press AUDIO repeatedly during playback tochoose LR to hear both channels, LL to hearleft channel (only music) and RR to hearright channel (only vocal).


01-39 DVP900_69_Eng3 20/01/2005, 4:23 PM18

3139 246 13783

En

gli

s h

19

Getting Started

Step 4: Setting the speakers’channels

You can adjust the delay times (centreand surround only) and volume level forindividual speakers. These adjustments letyou optimize the sound according toyour surroundings and setup.

IMPORTANT!The speaker settings only available onMulti-channel audio outputs. You canalso press SOUND MODE button toselect Multi-channel.



3 Press 1 2 to highlight {SPEAKERS}, thenpress 4.

4 Press 34 to highlight one of the options,then press 2.

{FRONT SIZE, CENTER SIZE,SURROUND SIZE}OFF – when no speaker is connected.LARGE – when connected speakers canproduce low frequency signals below120Hz.SMALL – when connected speakerscannot produce low frequency signalsbelow 120Hz.

{SUBWOOFER}ON – when a subwoofer is connected.OFF – when no subwoofer is connected.

{FRONT DISTANCE}– Sets the distance from your listeningplace to the front speakers (1 ~ 11.8m).

{CENTER/REAR DISTANCE}– Sets the distance from your listeningplace to the center/rear speakers. (choicesdifferent depending on the {FRONTDISTANCE} setting).

5 Press 1 2 3 4 to adjust the setting thatbest suit your surround sound needs.

6 Press OK to confirm.

Helpful Hints:– Use the longer delay time settings whenthe surround/rear speakers are closer to thelistener than the front speakers.

Advance Bass Management

Movie Mode

This menu allows you to adjust eachspeaker volume for playing all discsexcept SACD audio playback.

➜ The volume balance value ranges from-6dB to +7dB.

Music Mode

When music mode is set, speaker settingswill be applied during SACD playbackonly.Additional adjustments available in SACDbass managements are:– Cut-off frequency adjustment:60Hz, 80Hz, 100Hz and 120Hz– Slope adjustment:12dB/oct, 18dB/oct and 24dB/oct

Helpful Hint:– These additional adjustments areavailable in the subwoofer adjustments.


01-39 DVP900_69_Eng3 20/01/2005, 4:23 PM19

3139 246 13783

En

glish

20

Disc Operations

IMPORTANT!– Depending on the DVD or VIDEOCD, some operations may bedifferent or restricted.– Do not push on the disc tray orput any objects other than discs inthe disc tray. Doing so may causethe disc player to malfunction.

Playable Discs

Your DVD Player will play:– Digital Versitile Discs (DVDs)– Digital Versitile Audio Discs (DVD-A)

– standard defination layer– Video CDs (VCDs)– Super Video CDs (SVCDs)– Super Audio CDs (SACDs)– Digital Video Discs + Recordable

[Rewritable] (DVD+R[W])– Compact Discs (CDs)– MP3 discs, picture (Kodak, JPEG) files

on CD-R(W).– JPEG/ISO 9660 format– Maximum 30 characters display.– Supported sampling frequencies :

32 kHz, 44.1 kHz, 48 kHz (MPEG-1)16 kHz, 22.05 kHz, 24 kHz (MPEG-2)

– Supported Bit-rates : 32~256 kbps(MPEG-1), 8~160 kbps (MPEG-2)variable bitrates

SUPER VIDEO

Helpful Hints:– It may not be possible to play CD-R/RWor DVD-R/RW in all cases due to the type ofdisc or condition of the recording.– If you are having trouble playing acertain disc, remove the disc and try adifferent one. Improperly formatted disc willnot play on this DVD Player.

Region CodesThis DVD Player is designed to supportthe Region Management System. Checkthe regional code number on the discpackage. If the number does not matchthe Player’s region number (see tablebelow), the Player may be unable toplayback the disc.

RegionRegion

number ofthe unit

Discs that canbe played(Example)

U.S.A. andCanada regions

U.K andEurope regions

General regions

Australia region

1

2

3

ALL

4

ALL

ALL

ALL

1

2

3

4

01-39 DVP900_69_Eng3 20/01/2005, 4:23 PM20

3139 246 13783

En

gli

s h

21

IMPORTANT!If the inhibit icon (X) appears on theTV screen when a button is pressed,it means the function is not availableon the current disc or at the currenttime.

Playing discs

1 Press SELECT button until “DVD” islighted on the remote control displaypanel (see remote control, page 15).

2 Turn on the TV and set it to the correctVideo In channel. (See page 16 “Setting upthe TV”).

3 Press STANDBY-ON B on the front ofthe DVD Player.➜ You should see the Philips DVDbackground screen on the TV.

4 Press OPEN/CLOSE 0 to open the disctray and load a disc. Press again to closethe disc tray.➜ Make sure the label is facing up. Fordouble-sided discs, make sure the label ofthe side you want to play is facing up.

5 Playback may start automatically(depending on the disc type).➜ If a disc menu appears on the TV, see“Using the Disc Menu”.➜ If the disc is locked by parental control,you must enter your four-digit password.(See pages 34-35).

6 At any time, simply press STOP 9 tostop playback.

Disc Operations

Using the Disc MenuDepending on the disc, a menu mayappear on the TV screen once you loadthe disc.

To select a playback feature or item● Use the 1 2 3 4 or numeric keypad

(0-9) on the Remote Control, then pressPLAY B or OK to start playback.

To access the menu● Press DISC MENU on the Remote

Control.

Display on LCDArea 1– Currently playing logo or media will belit during playback.Area 2A– Indicates current information in thedisc or media during playback.Area 2B– Indicates current disc or media elapsedtime.Area 3– Indicates current mode of the DVDPlayer.

TIPS: The operating features described here might not be possible for certain discs. Always referto the instructions supplied with the discs.

Area 1

Area 2A

Area 2B

Area 3

01-39 DVP900_69_Eng3 20/01/2005, 4:23 PM21

3139 246 13783

En

glish

22

Disc Operations

Resuming playback from the laststopped point(DVD/DVD-A/VCD/CD)

Resume playback of the last five discs,even if the disc was remove from thePlayer.

1 Load one of the last five discs.➜ “READING” appears.

2 Press PLAY B and the disc will play fromthe last point.

To cancel resume mode● While play is stopped, press STOP 9

again.

Shuffle(DVD/DVD-A/VCD/CD/SACD/MP3)

On a DVD,DVD-A disc - this shuffles theplaying order of chapters within a title, ifthe title has more than one chapter.

On an Audio CD, Video CD, SACD - thisshuffles all the tracks in random orderwithin a disc.

1 Press SHUFFLE during playback.➜ SHUFFLE appears on the TV screen forabout two seconds.

2 To return to normal playback, pressSHUFFLE again.

Helpful Hint:– For SACD, shuffle functions works in thecurrently selected area only.

Playback controlsUnless otherwise stated, all operationsdescribed are based on Remote Controluse. Some operations can be carried outusing the DVD system Menu.

Pausing playback(DVD/DVD-A/VCD/CD)

1 During playback, press PAUSE ;.➜ Play will pause and sound will be mute.

2 Press PAUSE ; repeatedly to select theprevious or next picture frame.

3 To return to normal playback, pressPLAY B.

Selecting a title (track) /chapter(DVD/DVD-A/VCD/CD)

1 Press T or S briefly duringplayback to go to the next chapter/trackor to return to the beginning of thecurrect chapter/track respectively.

2 Press S twice briefly to step back tothe previous chapter/track.

3 To go directly to any chapter/track, enterthe chapter/track number using thenumerical keys (0-9).

Zoom (DVD/DVD-A/VCD/JPEG)

Zooming allows you to enlarge the videoimage during playback.

1 Press ZOOM during playback to selectthe zoom factor.

2 Press 1 2 3 4 to move through thezoomed image.

3 Press ZOOM repeatedly to increase anddecrease the zoom factor.➜ Playback will continue.


01-39 DVP900_69_Eng3 20/01/2005, 4:23 PM22

3139 246 13783

En

gli

s h

23

Scan(DVD/DVD-A/VCD/CD/MP3/SACD)

Scanning plays the first 10 seconds of eachchapter/track on the disc. You can activatescan playback by pressing SCAN button.OR

1 Press SYSTEM MENU and press 3 4to select {TOOLBAR} option.


Move to {VIEW} and press 4.Move to {CHAPTER PREVIEW} and press2 to select {ON or OFF}.

Time Search(DVD/DVD-A/VCD/CD/SACD/MP3)

The Time Search function allows you tostart playback at any chosen time on thedisc.



Move to {SEARCH} and press 4.Move to {TIME} and press 2.➜ Playback will pause.

3 Enter hours, minutes and seconds in thetime edit box using Remote Controlnumerical key pad.

4 Press OK to confirm.➜ Playback starts from the selected timeon the disc.

5 To remove the menu, press SYSTEMMENU.

Helpful Hint:– This feature will not applicable to VCDdiscs with Playback control in PBC ON.

Disc Operations

Repeat (DVD/DVD-A/VCD/CD/MP3/SACD/JPEG)

You can play a chapter, track, title orentire disc repeatedly.

● Press REPEAT continuously to choose aRepeat mode during playback appears onthe TV screen.

➜ DVD / DVD-A‘CHAPTER /TITLE /DISC /OFF’.

➜ VCD / CD‘TRACK /DISC /OFF’.

➜ MP3‘TRACK /ALBUM /DISC /OFF’.

➜ SACD‘TRACK /AREA /OFF’.

➜ JPEG‘REPEAT ROLL/REPEAT DISC’.

Repeat A-B (DVD/DVD-A/VCD/CD)

You can play only a specific portion of aTitle/Track or Chapter repeatedly.

1 During playback, press REPEAT A-B atyour chosen starting point.➜ ‘REPEAT A’ appears on the TV screen.

2 When the disc reaches your selectedending point, press REPEAT A-B again.➜ ‘A-B’ appears on the TV screen, and therepeat sequence begins.

3 To resume regular playback, pressREPEAT A-B again.➜ ‘A/B OFF’ appears on the TV screen.


01-39 DVP900_69_Eng3 20/01/2005, 4:23 PM23

3139 246 13783

En

glish

24

Disc Operations

Still Picture and Frame-by-frameplayback (DVD/DVD-A/VCD)

You can activate frame by frame playbackby pressing PAUSE ; or 3 button onthe remote control repeatedly.OR



Move to {SEARCH} and press 4.Move to {FRAME BY FRAME} and press 2.➜ Playback will pause.

3 Use the cursor keys 1 2 to select theprevious or next picture frame.

4 To exit frame by frame playback, pressPLAY B.

Slow Motion(DVD/DVD-A/VCD/SVCD)

Slow motion can be activated by pressingthe 4 button. To exit slow motion mode,press PLAY B.OR



Move to {SEARCH} and press 4.Move to {SLOW} and press 2.➜ Sound will be muted.

3 Press 1 2 to select the required speed:<1/8, <1/4, <1/2 or <1 (backward), or>1/8, >1/4, >1/2 or >1 (forward).➜ Select 1 to play the disc at normalspeed again.

4 To return to normal speed, press PLAY B.

Searching (DVD/DVD-A/VCD/SVCD/CD/MP3/SACD)

For DVD/DVD-A/VCD/SVCD1 Press SYSTEM MENU and press 3 4

to select {TOOLBAR} option.


Move to {SEARCH} and press 4.Move to {FAST} and press 2.➜ Sound will be muted.

3 Use 1 2 to select the required speed:<<4, <<8 or <<32 (backward), or >>4,>>8 or >>32 (forward).

4 To return to normal speed, press PLAY B.

● You can also hold down T or Skeys for more than two seconds toactivate fast search.


For CD/MP3/SACD

1 Use the 1 2 keys to select the requiredspeed: <<4, <<8 or <<32 (backward), or>>4, >>8 or >>32 (forward).

2 You can also hold down T or Skeys for more than two seconds toactivate fast search.

01-39 DVP900_69_Eng3 20/01/2005, 4:23 PM24

3139 246 13783

En

gli

s h

25

Disc Operations

Special DVD features

Selecting a title

Some DVDs may contain several titles. Ifthe disc has a title menu recorded on it,you can start playback from the selectedmovie title.

1 Press RETURN.➜ The disc title menu appears on the TVscreen.

2 Use 3 4 1 2 or the numeric keypad(0-9) to select a play option.


Camera Angle

If the disc contains sequences recordedfrom different angle, this allows you toview picture from different angle.

● Press ANGLE repeatedly to select adifferent desire angle.➜ Playback changes to the selected angle.

Changing the Audio Language

● Press AUDIO repeatedly to selectdifferent audio languages.

Subtitles Language

● Press SUBTITLE repeatedly to selectdifferent subtitle languages.


Program Playback(DVD/DVD-A/VCD/CD/SACD/MP3)

You can play the contents of the disc inthe order you want by programming thetracks to be played. Up to 20 tracks canbe stored.



Move to {PROGRAM} and press 4.Move to {TRACKS} and press 2.➜ The ‘Program’ menu appears.

3 Use 3 or 4 to select your preferred Titleor Chapter number.

4 Press OK to confirm selection.➜ The selection of Title or Chapternumbers will appear in the {PLAYLIST}.

Erasing a selection in a Program

1 Press 4 to select the {PLAYLIST}.

2 Press 2 to display the {PLAYLIST} and use3 or 4 to select the item you want toerase.

3 Press OK to erase the selection.

Erasing all selections

● Use 4 to select {CLEAR ALL} and press2 to select confirm.➜ All selections will be erased.

To list the programmed item(s)● While play is stopped, press SYSTEM

MENU.Select {PROGRAM} and set it to ON,then press B.

01-39 DVP900_69_Eng3 20/01/2005, 4:23 PM25

3139 246 13783

En

glish

26

Playing MP3/JPEG/Kodak PictureCD

This player can playback MP3, JPEG, orKodak Picture CD files on a personallyrecorded CD-R/RW disc or commercialCD.

IMPORTANT!You have to turn on your TV and set tothe correct Video In channel. (See page 16“Setting up the TV”).

1 Load a disc.➜ The disc reading time may exceed 30seconds due to the complexity of the fileconfiguration.➜ Playback starts and the playlist appearsautomatically. If the disc includes bothMP3 and picture files, the selection ofmenu appears on the TV screen.

2 Use 3 4 to select a album/track andpress OK to open the folder.

3 Use 1 2 to select a album/track in thenext layer to playback.

4 Playback will start at the selected file andcontinue to the end of the folder.

5 To stop playback, press STOP 9.

● Press DISC MENU to return to thethumbnail screen (for JPEG files).

Special features for picture discplayback

IMPORTANT!You have to turn on your TV and set tothe correct Video In channel. (See page 16“Setting up the TV”).

Slide show playback setting

You can set the duration of each picturetime playback.



Move to {SLIDE SHOW} and press 4.Move to {PICTURE TIME} and press 2.

Slow – Picture playback for 8 seconds.

Medium – Picture playback for 5seconds.

Fast – Picture playback for 2 seconds.


Rotating the picture



Move to {VIEW} and press 2.Move to {ROTATE} and press 2 tochoose the following: {- 180 to + 180}.


Helpful hint:– Rotate function is not available during slideshow playback.

Disc Operations


01-39 DVP900_69_Eng3 20/01/2005, 4:23 PM26

3139 246 13783

En

gli

s h

27

Disc Operations

Zoom picture

● During playback, press ZOOM repeatedlyto display the picture with different scales.

● Use 1 2 3 4 to view the zoomed picture.

Playback with multi-angles

● During playback, press 3 4 1 2 to rotatethe picture on the TV screen.3: flip the picture vertically4: flip the picture horizontally1: rotate the picture anti-clockwise2: rotate the picture clockwise

Scan Effect

● Press ANGLE repeatedly to choose adifferent scan effect.

Playing MP3 music or JPEG picture

It is possible to playback discs thatcontains both MP3 music and JPEGpicture files.

1 Load a disc that contains music andpicture.➜ The disc menu appears on the TV.

Play Contents

1. Pictures

2. MP3

2 Select an MP3 track or a JPEG picture file.➜ The music tracks or picture files will beplayed back one after another until end ofthe folder.

3 To return to disc menu, press STOP Çfollowed by 1.

Helpful Hint:– Some files on Kodak or JPEG disc maybe distorted during playback due to theconfiguration and characteristics of the disc.

Playing Super Audio CD (SACD)

There are three types of SACD discs:single layer, double layer or hybrid disc.The hybrid disc contains both SuperAudio CD and standard audio CD layers,only the SACD layer is possible toplayback on this DVD player.

1 Load a SACD.➜ The disc menu appears on the TVscreen.

2 Playback will start automatically.➜ If the SACD consists of mulit-channeland stereo tracks, the setting willautomatically switch according to the{Analogue Output} selection.➜ To playback stereo tracks, use 3 4keys to make your selection from the discmenu, then press PLAY B.


01-39 DVP900_69_Eng3 20/01/2005, 4:23 PM27

3139 246 13783

En

glish

28

This DVD Player setup is carried out viathe TV, enabling you to customize theDVD player setting to suit your ownrequirements.

Preferences


2 Press 3 4 to select {PREFERENCES}.

3 In {PREFERENCES}, press 1 2 to highlightone of the preferred option.



Use ↓ or ↑ to select other options, → to enter options,RETURN to leave the menu

Picture Adv.Picture Sound

Setup

Preferences

DVD Menu Options

NOTE:Some of the features in the DVDMenu Options are described in“Getting Started”.


Picture


Picture

Color Setting

Contrast

Brightness

Preference

Sharpness

Colour Setting

Animation

Rich

Natural

Soft

Personal

Color Settings (not applicable forComponent Video Output)

You can select from one of five predefinedsets of color settings and one set{PERSONAL} which you can defineyourself.

1 When {PERSONAL} is selected, it allowsyou to fine-fune saturation, brightness,contrast and sharpness.

2 Press 3 4 to adjust the values of theseparameters.

3 Press OK or 1 to exit.

Saturation/ Contrast/ Brightness(not applicable for ComponentVideo Output)

Adjust the video color saturation/contrast and brightness.

➜ Use 1 2 to select the following option;{-7 to +7}.

Sharpness (for all video output)

Adjust the sharpness of the video.

➜ Use 1 2 to select the following option;{0 to +7}.

Video Shift

Video shift can be used to adjust thehorizontal position of the picture on theTV screen by scrolling the slider to theleft or right.

➜ Use 1 2 to select the following option;{+1 to +7}.

01-39 DVP900_69_Eng3 20/01/2005, 4:23 PM28

3139 246 13783

En

gli

s h

29

Advance Picture

Allows you to fine-tune the followingvideo parameters.

Use ← or → to select other options, ↓ to enter the submenu,RETURN to leave the menu.

Adv.Picture Sound Features

TrueLife

Gamma

DCDi

Preferences

Chroma Delay

TrueLife (for Progressive Scanoutput only)

Produces a more dynamic picture byincreasing the contrast and colorintensity.

➜ Use 1 2 to select the followingoption; {0 to +7}.

DCDi (for Progressive Scan outputonly)

DCDi (Directional CorrectionDeinterlacing) computes and tracks theangle of edge to fill in the missing pixelson the TV screen.

➜ On – Optimize the picture qualitysignificantly, especially during the slowmotion playback.

➜ Off – Select this to disable DCDifunction.

Gamma (for Component outputonly)

Enables you to adjust the intensity of thepicture non-linearly. A positive valueenables you to bring out low level detailin dark scenes, while a negative valueemphasizes contrast.


DVD Menu Options

Chroma Delay (for Componentoutput only)

The chroma (color) and luma (brightness)signals are not synchronized. This settingallows you to adjust the advance delay ofthe chroma signal to yield a perfectly clearpicture.


4:3 Aspect (for Progressive Scanoutput only)

To adjust the ratio of the pictures on theTV screen.

➜ 4:3 Pillarbox – For display of 4:3picture on 16:9 TV screen withoutstretching.

➜ NL Stretch – For display of 4:3 imageon 16:9 TV with non-linear stretching(center portion of screen is stretch lessthen the side).

➜ Auto – No aspect ratio adjustment

HIVideoDef (for HDMI/DVI outputonly)

You are able to select the resolution forfiner color selection when picture appearson the TV screen. The available optionswill be displayed once you have connectedthe HDMI connection (see page 10).

➜ Use 1 2 to select the following option;{480p, 576p, 720p, 1080i, AUTO}.

Helpful Hints:– If no display appears on the TV screendue to unsupported resolution, reconnect anyavailable interlace video output to youmonitor to re-adjust the resolution settings.– Only 480p and 576p are available forprogressive scan analogue output.


01-39 DVP900_69_Eng3 20/01/2005, 4:23 PM29

3139 246 13783

En

glish

30


Sound


Sound Features

Night Mode

CD Upsample

Analog Output

Preferences

ClearVoice

Night Mode

High volume outputs are softened,enabling you to watch your favorite actionmovie without disturbing others.

➜ On – The dynamics of your soundoutput are optimized.

➜ Off – To enjoy the surround soundwith its full dynamic range.

Analog Output

Allows you to set the stereo analogoutput of your DVD Player.

➜ Stereo – Select this to change channeloutput to stereo that delivers sound fromonly the two front speakers andsubwoofer.

DVD Menu Options

➜ Dolby Surround-compatible – Usethis option when your DVD Player’sAUDIO OUT jacks are connected to aDolby Pro Logic decoder.

➜ 3D Sound – 3D Sound provides avirtual surround sound experience usingjust two speakers. Use this optionconnecting directly to a TV or stereo.

➜ Multi-channel – Select this to enableMulti-channel output. Dolby Pro Logic IIwill be activated if a 2channel recordeddisc is being played back.

Helpful Hints:– Multi-channel and downmixed stereooutput are not available simultaneously.– You can also use SOUND MODEbutton to select this options.

CD Up-sampling

Allows you to convert your music CDfrom 44.1kHz/16 bit to various highersampling rate for superior sound quality.

➜ Use 1 2 to select the following option;{88.2kHz, DSD, OFF}.

Helpful hints:– CD Up-sampling will be disabled when{MULTICHANNEL} is selected.– You can also use AUDIO button toselect this options.

Clear Voice

Increases the volume of dialog for easylistening at night. This function is onlyavailable for certain multi-channel discs.

➜ Use 3 4 to select the {ON or OFF}.

Content Mode

This setting allows you to select theoptimum of video output to maximise thevideo quality.

➜ Video – Select this to have a morestable and less of an action of videocontent.➜ Film – Film mode is adapted best formovies.➜ Auto – The video output will be inaccordance with the video contents formost disc.

01-39 DVP900_69_Eng3 20/01/2005, 4:23 PM30

3139 246 13783

En

gli

s h

31

Features


Features

Wakeup timer

Status window

Help line

Preferences

Dimmer

Wakeup timer

The DVD Player will turn on automaticallyafter the preset time. Pressing any buttonduring standby mode will cancel thewakeup timer mode.

➜ Use 1 2 to select the following option;{0 to 600} minutes.

Helpline

On – Helpline appears on the TV screenwith a brief description of the selectedoption.

Off – If you no longer require the help-line.

Status Window

On – Displays the current play state andtime information on the TV screen.

Off – No information shown on the TVscreen.

DVD Menu Options

Setup

● Playback will stop when {SETUP} menu isselected.


2 Press 3 4 to select {SETUP}.

3 In {SETUP}, press 1 2 to highlight one ofthe preferred option.



Use ↓ or ↑ to select other options, → to enter options,RETURN to leave the menu

Language TV Audio Menu

Setup


Karaoke Vocal

Enables you to play multi-channel karaokeDVDs.

➜ On – Karaoke channels on the disc willbe mixed into normal stereo, allowing youto hear both the lyrics and musictogether.

➜ Off – The sound from lyrics will bemuted.

Dimmer

To adjust the brightness of front paneldisplay.

➜ Low – Set to the lowest level ofbrightness.

➜ Medium – Set to the medium level ofbrightness.

➜ Normal – Set to the normal level ofbrightness.

Helpful hint:– You can also use DIM button to selectthis options.

01-39 DVP900_69_Eng3 20/01/2005, 4:23 PM31

3139 246 13783

En

glish

32

DVD Menu Options


Language


Language TV Audio Menu

Menu Language

Setup

Default Subtitle

Default Audio

Menu Language

This menu contains various languageoptions for display language on the TVscreen. For details, see page 18.

Default Subtitle/ Default Audio

This menu contains various languageoptions for subtitle or audio languagewhich may be recorded on the DVD. Fordetails, see page 18.

TV

TV System

This menu contains the options forselecting the color system that matchesthe connected TV. For details, see page 17.

TV Shape

This menu contains the options forsetting the aspect ratio of the DVD Playeraccording to the connected TV. For details,see page 17.

Audio Menu


Audio Menu Speakers Movie Mode

Digital Output

SACD Direct

Subwfr freq

Setup

Plug And Play

Digital Output

Digital output selection enables you tospecify the type of digital output suitablefor your AV receiver.

➜ All – If you connected the DVDPlayer’s Digital (Coaxial or Optical) jackto a multi-channel decoder/receiver.

➜ PCM Only – If you receiver is notcapable of decoding a multi-channel audio.

➜ Off – Select this to deactivate thedigital output.

Helpful Hint:– Digital output is not available for SACDdue to copy-protection.

01-39 DVP900_69_Eng3 20/01/2005, 4:23 PM32

3139 246 13783

En

gli

s h

33

Subwoofer frequency

Enables you to select Subwooferfrequency output between 120Hz {LOW}and 200Hz {HIGH}.

SACD Direct

Enables you (with a suitable speakersystem where the satelite speaker hassufficient bass response to 40Hz) tobypass the bass management system formulti-channel SACD playback. This helpsto preserve maximum sound quality ofyour SACD.

➜ On – Select this to enjoy pure SACDquality.

➜ Off – When set to OFF, the speakersettings will applied during multi-channelSACD playback (see page 19).

HDMI audio

This feature is available for automaticaudio selection only when HDMI devicesis connected and recognised.

➜ On – HDMI will output whatever is onthe SPDIF connector (depending on thesetting of ‘Digital Output’ and the disc.

➜ Off – HDMI audio stream muted.

PCM Output

Allows you to select PCM digital outputbetween 48kHz and 96kHz.

➜ 48kHz – A 96kHz PCM data disc willbe converted to 48kHz.

➜ 96kHz – 96kHz PCM audio on non-copy protected DVD discs will be playedback at 96kHz. For copy protected discs,the digital output will be downsampled to48kHz.

Speakers (Advance BassManagement)

This menu contains setup options foryour audio output which makes thespeaker setup system reproduce highquality surround sound. For details, seepage 19.

DVD Menu Options


Features


Features Access

PBC

Sleeptimer

Setup

PBC (Playback Control)

Playback Control feature (only for VCD2.0) can be set to {ON or OFF}.If ‘ON’ is selected, the disc menu (ifavailable on the disc) will appear on theTV.

Sleep Timer

Sleep timer turns this DVD Player tostandby mode when playback is stoppedfor 20 minutes.

➜ On – DVD Player will go to standbyafter a pre-defined time.

➜ Off – Select this to disable the {SLEEPTIMER}.

01-39 DVP900_69_Eng3 20/01/2005, 4:23 PM33

3139 246 13783

En

glish

34

DVD Menu Options


Access


Access

Enter PIN

Parental Level

Setup

Country

Change PIN

Enter PIN

1 Press SYSTEM MENU and press 4 toselect {SETUP}.

2 Press 2 to select {ACCESS}.➜ Playback will stop.

3 Move to {ENTER PIN} and enter the four-digit PIN.

4 Enter the four-digit PIN again to unlockthe disc or the display the {ACCESS}menu.

Disc Lock

Not all discs are rated or coded by thedisc maker. You can prevent a specific discfrom playing by locking the disc.

➜ On – You will need to enter the four-digit password before you can play thedisc.

➜ Off – Select this to unlock the disc andallow future playback.

Helpful hints:– When a locked disc is loading, the DVDPlayer will prompt the four-digit password(“0000” is the default password).– To change the password, refer to option{CHANGE PIN}.

Enabling Play once/Play Always

1 Insert a disc.➜ The ‘child safe’ dialog appears on theTV screen.

2 Press 3 4 to select {Play once} or {Playalways}. Then, enter the four-digit code.➜ {Play once} – the disc can play as longas it is in the disc tray and the DVDsystem power is on.➜ {Play always} – the disc will play always.even the Child Lock is set to Ç (lock).

3 If you later want to lock the disc so it willnot play always, insert the disc and pressÇ while the safe { icon appears on theTV screen.➜ Locked | icon will appear. You mayneed to remove the disc or turn off thepower before the disc is completelylocked. The next time when you insertthe disc, it will not play unless you enterthe four-digit code.

Country

● Parental Level codings are applicable onlyfor the country specified on the disc setby the disc manufacturer.

● So, for some discs, you may need tochoose the country for which the disc iscoded in order to play at the ParentalLevel you select.

01-39 DVP900_69_Eng3 20/01/2005, 4:23 PM34

3139 246 13783

En

gli

s h

35


DVD Menu Options

Change PIN

1 Press SYSTEM MENU and press 4 toselect {SETUP} menu.

2 Press 2 to select {ACCESS}.➜ Playback will stop.

3 Enter your four-digit password.

4 Press 4 to {CHANGE PIN}, then press 2to enter the four-digit password again.

5 Enter the new four-digit password.

6 Enter the new four-digit password asecond time to confirm.➜ The new four-digit password will takeeffect.

7 Press SYSTEM MENU again to exit the{SETUP} menu.

Helpful Hint:– If you forget the password, you can pressSTOP key four times to reset the passwordto the default settings (0000).

Rating explanations8 ADULT– Mature material; should be viewed only byadults due to graphic sexual material, violence orlanguage.

7 NC-17– No children under age 17; not recommendedviewing for children under age 17.

5-6 PG-R– Parental Guidance - Restricted; recommendedthat parents restrict children under 17 fromviewing or allow to view only when supervised bya parent or adult guardian.

4 PG13– Material is unsuitable for children under age 13.

3 PG– Parental Guidance suggested.

1-2G– General Audience; recommended as acceptablefor viewers of all ages.

0 NO PARENTAL– It will play all discs.

Parental Level

Some DVDs may have a parental levelassigned to the complete disc or tocertain scenes on the disc. This featurelets you set playback limitation level. Therating levels are from 1 to 8 and arecountry dependant. You can prohibit theplaying of certain discs that are notsuitable for your children or have certaindiscs played with alternative scenes (ifavailable on disc).

● VCD, SVCD, CD have no level indication,so parental control has no effect on thosekinds of discs. This also applies to mostillegal DVDs.

● Press 4 to {PARENTAL LEVEL}, thenpress 1 2 to select a rating from 1 to 8for the disc inserted.➜ Select “0” to deactivate Parental Level➜ Select a rating from 1 to 8; discs orscenes with the same rating or lower willplay. Higher rated discs or scenes will notplay unless you enter your 4-digitpassword.

Helpful Hint:– Some DVDs are not encoded with arating though the movie rating may beprinted on the Disc cover. The rating levelfeature does not prohibit play of such Discs.

01-39 DVP900_69_Eng3 20/01/2005, 4:23 PM35

3139 246 13783

En

glish

36

Problem Solution

No power – Check if the AC power cord is properly connected.– Press the STANDBY ON B on the front of the

DVD Player to turn on the power.

No picture – Refer to your TV’s manual for correct Video Inchannel selection. Change the TV channel until yousee the DVD screen.

– Check if the TV is switched on.

Distorted picture – Sometimes a small amount of picture distortion mayappear, depending on the disc being played. This isnot a malfunction.

‘Snowing’ effect when using HDMI – Check if your HDMI is faulty or properly connected.or DVI connection – Check if your device supports HDCP.

TV display a ‘blank’ or ‘distorted’ screen – TV is incompitable with the resolution you chose.after you switch the resolution on the – You may change to resolution of the player by{High Def-Video}. connecting your TV to any of the interlace connector

of the DVD player.

Completely distorted picture or – Connect DVD Player directly to the TV.black/white picture with DVD – Make sure the disc is compatible with the DVD

Player.– Ensure that the DVD Player’s TV System is set to

match that of the Disc and your TV.

No sound or distorted sound – Adjust the volume.– Check the audio cables and make sure both are

connected secured to the TV or Stereo Audio In jacks.

Picture freezes momentarily – Check the disc for fingerprints/scratches andduring playback clean with a soft cloth wiping from center to edge.

No audio at digital output – Check the digital connections.– Check if your receiver can decode MPEG-2 or DTS.

Make sure digital output is set to PCM Only.– Check if the audio format of the selected audio

language matches your receiver capabilities.

Troubleshooting

WARNINGUnder no circumstances should you try to repair the system yourself, as this willinvalidate the warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system for repair. Ifyou are unable to remedy a problem by following these hints, consult your dealer orPhilips for help.

Visit us at www.philips.com/support for service support

01-39 DVP900_69_Eng3 20/01/2005, 4:23 PM36

3139 246 13783

En

gli

s h

37

Disc can’t play – A DVD+R/DVD+RW/CD-R must be finalized.– Ensure the disc label is facing up.– Check if the disc is defective by trying another disc.– If you have recorded a Picture CD or MP3 CD

yourself, ensure that your disc contains at least 10pictures or 5 MP3 tracks.

– Check the Disc’s Region Code.

No return to start-up screen when – Reset the unit by switching the player off, then ondisc is removed again.

The player does not respond to – Aim the Remote Control directly at the sensorthe Remote Control on the front of the player.

– Reduce the distance to the player.– Replace the batteries in the Remote Control.– Re-insert the batteries with their polarities (+/–

signs) as indicated.

Buttons do not work – To completely reset the player, unplug the ACcord from the AC outlet for 5-10 seconds.

Player does not respond to some – Operations may not be permitted by the disc.operating commands during playback. Refer to the instructions of the disc jacket.

DVD Player cannot read – Use a commonly available cleaning CD/DVD toCDs/DVDs clean the lens before sending the DVD Player for

repair.

Menu items cannot be selected – Press STOP twice before selecting the System Menu.– Depending on the disc availability, some menu items

cannot be selected.

Troubleshooting

Problem Solution

Visit us at www.philips.com/support for service support

01-39 DVP900_69_Eng3 20/01/2005, 4:23 PM37

3139 246 13783

En

glish

38

Specifications

TV STANDARD (PAL/50Hz) (NTSC/60Hz)Number of lines 625 525Playback Multistandard (PAL/NTSC)

VIDEO PERFORMANCEComponent video Y: 1 Vpp into 75 ohmoutput PbPr: 0.7 Vpp into 75 ohmVideo output 1 Vpp into 75 ohmS-Video output Y: 1 Vpp into 75 ohm

C: 0.3 Vpp into 75 ohmVideo Shift Left/Right

AUDIO FORMATDigital MPEG Compressed

DigitalDolby Digital 16, 20, 24 bitsPCM fs, 44.1, 48, 96 kHz

MP3 (ISO 9660) 96, 112, 128, 256 kpps& variable bit ratefs, 32, 44.1, 48kHz

Analog Stereo SoundDolby Surround-compatible downmix from Dolby Digitalmulti-channel sound3D Sound for virtual surround sound on 2 speakers

AUDIO PERFORMANCEDA Converter 24 bitsDVD fs 96 kHz 4 Hz - 44 kHz

fs 48 kHz 4 Hz - 22 kHzCD/Video CD fs 44.1kHz 4 Hz - 20 kHzS-Video CD fs 48 kHz 4 Hz - 22 kHz

fs 44.1kHz 4 Hz - 20 kHzSignal-Noise (1kHz) 115 dBDynamic Range (1kHz) 95 dBCrosstalk (1kHz) 110 dBDistortion and Noise (1kHz) 95 dBMPEG MP3 MPEG Audio Layer 3

CONNECTIONSY Pb Pr output (480i/p) Cinch 3x (green, blue, red)Video output Cinch (yellow)S-Video output Mini DIN, 4 pinsAudio L+R output Cinch (white/red)Digital Output 1 coaxial, 1 optical

IEC60958 for CDDA / LPCMIEC61937 for MPEG 1/2,Dolby Digital, DTS

CABINETDimensions (w x h x d) 435 x 79 x 315 mmWeight Approximately 5.3 kg

POWER SUPPLY (UNIVERSAL)Power inlet

U.S.A and Canada models 120V, 60HzAustralia models 240V; 50HzU.K and Europe models 230V; 50HzGeneral model 110-240V; 50/60Hz

Power usage Approx. 25 WPower usage standby > 1 W

Specifications subject to change without prior notice

01-39 DVP900_69_Eng3 20/01/2005, 4:23 PM38

3139 246 13783

En

gli

s h

39

Analog: Sound that has not been turned intonumbers. Analog sound varies, while digitalsound has specific numerical values. Thesejacks send audio through two channels, the leftand right.Aspect ratio: The ratio of vertical andhorizontal sizes of a displayed image. Thehorizontal vs. vertical ratio of conventional TVs.is 4:3, and that of wide-screens is 16:9.AUDIO OUT Jacks: Red and white jacks onthe back of the DVD Player that send audio toanother system (TV, Stereo, etc.).Bit Rate: The amount of data used to hold agiven length of music; measured in kilobits persecond, or kbps. Or, the speed at which yourecord. Generally, the higher the bit rate, or thehigher the recording speed, the better thesound quality. However, higher bit rates usemore space on a Disc.Chapter: Sections of a movie or a musicpiece on a DVD that are smaller than titles. Atitle is composed of several chapters. Eachchapter is assigned a chapter number enablingyou to locate the chapter you want.Component Video Out Jacks: Red, blueand green jacks on the back of the DVDSystem that send high-quality video to a TVthat has Component Video In jacks (R/G/B, Y/Pb/Pr, YUV, etc.).Digital: Sound that has been converted intonumerical values. Digital sound is availablewhen you use the DIGITAL AUDIO OUT(COAXIAL or OPTICAL) jacks. These jackssend audio through multiple channels, insteadof just two channels as analog does.DCDi™ by Faroudja : Digital Crystal Clear isa package of picture innovations that digitallyadjusts and optimizes picture quality to optimalcontrast, color and sharpness level.Disc menu: A screen display prepared forallowing selection of images, sounds, subtitles,multi-angles, etc recorded on a DVD.Dolby Digital: A surround sound systemdeveloped by Dolby Laboratories containing upto six channels of digital audio (front left andright, surround left and right, center andsubwoofer).DTS: Digital Theater Systems. This is asurround sound system, but it is different fromDolby Digital. The formats were developed bydifferent companies.HDMI: HDMI is a direct digital connectionthat can carry digital HD video as well as digitalmulti-channel audio. By eliminating theconversion to analog signals, it delivers perfectpicture and sound quality, completely free fromnoise. HDMI is fully backward-compatible withDVI.

JPEG: A very common digital still pictureformat. A still-picture data compression systemproposed by the Joint Photographic ExpertGroup, which features small decrease in imagequality in spite of its high compression ratio.MP3: A file format with a sound datacompression system. “MP3” is the abbreviationof Motion Picture Experts Group 1 (or MPEG-1) Audio Layer 3. By using the MP3 format. OneCD-R or CD-RW can contain about 10 timesmore data then a regular CD.Multichannel: DVDs are formatted to haveeach sound track constitute one sound field.Multichannel refers to a structure of soundtracks having three or more channels.Parental level: Limits Disc play according tothe age of the users or the limitation level ineach country. The limitation varies from disc todisc; when it is activated, playback will beprohibited if the software’s level is higher thanthe user-set level.PCM (Pulse Code Modulation): A systemfor converting analog sound to digital sound forlater processing, with no data compressionused in conversion.Playback control (PBC): Refers to thesignal recorded on video CDs or SVCDs forcontrolling playback. By using menu screensrecorded on a Video CD or SVCD thatsupports PBC, you can enjoy interactiveplayback and searching.Progressive Scan: It displays all thehorizontal lines of a picture at one time, as asingle frame. This system can convert theinterlaced video from DVD into progressiveformat when the DVD Player is connected to aProgressive Scan TV. It dramatically increasesthe vertical resolution and provides the bestpicture.Region code: A system allowing discs to beplayed only in the region designated. This unitwill only play discs that have compatible regioncodes. You can find the region code of yourunit by looking on the product label. Somediscs are compatible with more than oneregion (or ALL regions).S-Video: Produces a clear picture by sendingseparate signals for the luminance and thecolor. You can use S-Video only if your TV hasan S-Video In jack.Title: The longest section of a movie or musicfeature on DVD. Each title is assigned a titlenumber, enabling you to locate the title youwant.VIDEO OUT jack: Yellow jack on the backof the DVD Player that sends the DVD picturevideo to a TV.

Glossary

01-39 DVP900_69_Eng3 20/01/2005, 4:24 PM39

user manual - philips...3139 246 13783 1 dvd/sacd video player dvp9000s user manual thank you for...

Documents