EN - 1

Table of Contents

1  INTRODUCTION 3 

1.1  SAFETY PRECAUTIONS 3 

1.2  PACKAGE CONTENT 4 

2  MAIN UNIT VIEWS 5 

3  GETTING STARTED 6 

3.1  HARDWARE INSTALLATION 6 

3.2  GAMING SOFTWARE INSTALLATION 6 

4  BASIC OPERATIONS 8 

4.1  4-DIRECTION WHEEL BUTTON 8 

4.2  DPI SETTINGS 8 

4.3  GAMING MODE SETTINGS 9 

4.4  PROGRAMMABLE BUTTONS 9 

4.5  ADJUSTABLE LIFT BUTTON 10 

4.6  INTERCHANGEABLE RUBBER FINGER GRIP 10 

4.7  ADJUSTING WEIGHT 11 

5  USING GAMING SOFTWARE 12 

5.1  BUTTON SETTINGS 12 

5.2  MACRO SETTINGS 14 

5.3  MACRO SETTINGS 18 

6  APPENDIX 19 

EN - 2

Warning: This mark indicates actions that could lead to serious

injury to personnel operating the device or damage to the device

if ignored or handled incorrectly.

WARNING: The device complies with IEC 60825-1 Class 1 laser product and

emits laser radiation during

CAUTIONS: operation. Do NOT stare into laser beam directly. The product is

equipped with a low power laser device. To ensure the quality of

the laser device, do NOT open up the case or attempt to repair the

unit. Please contact authorized service center for any service

required.

To reduce the risk of electric shock, do NOT remove the cover.

No user-serviceable parts inside. Refer servicing to qualified

service personnel. Unplug the product from the wall outlet before

servicing or when it is not used for a long period of time.

The manufacturer should not hold responsibility for the

damage caused by any substitutions and modifications of the

product without authorization from the manufacturer or

authorized organization.

EN - 3

1 Introduction

Thank you for purchasing Canyon Gaming Mouse CCR-MSG02, an ultimate

gaming mouse designed for extreme gaming experience. You have made an

excellent choice and we hope you will enjoy all of its exciting features. Please read

through the user manual carefully before using the product, and follow all of the

procedures in the manual to fully enjoy all features of the product.

1.1 Safety Precautions

Please observe all safety precautions before using Canyon Gaming Mouse

CCR-MSG02. Please follow all procedures outlined in this manual to correctly

operate the device.

Do not direct the laser beam at eyes at all times.

Do not attempt to disassemble or alter any part of the device that is not

described in this guide.

Do not place the device in contact with water or any other liquids. The

device is NOT designed to be liquid proof of any sort.

In the event of liquid entry into interior of device, immediately disconnect

the device from the computer. Continuing use of the device may result in

fire or electrical shock. Please consult your product distributor or the

closest support center.

To avoid risk of electrical shock, do not connect or disconnect the device

with wet hands.

Do not place the device near a heat source or directly expose it to flame or

heat.

Never place the device in vicinity of equipments generating strong

electromagnetic fields. Exposure to strong magnetic fields may cause

malfunctions or data corruption and loss.

EN - 4

1.2 Package Content

Item Image Description Quantity

Gaming Mouse Main Unit 1

Rubber Finger Grip 1

Weight Box / Weigh Pieces(6) 1

Driver and Documentation CD 1

User Manual + Warranty Card 1

EN - 5

2 Main Unit Views

4-Direction

Wheel Button

Lift Adjusting

Button

Mode Switching

Button

Changeable

Finger Grip DPI Switch

Mode Display LED/

DPI Display LED

Internet Forward

Button

Internet Backward

Button

Finger Grip

Release Button

LED Lighting LED Lighting

EN - 6

3 Getting Started

3.1 Hardware Installation

Turn on PC or notebook.

Insert USB connector into any of

the USB port on PC or notebook.

Device will be automatically

installed in a few seconds. System

reboot may be required upon

system request.

The device now is ready for use.

NOTE:

Some of the features such as wheel

button may not function properly

without driver installed.

3.2 Gaming Software Installation

Click on 迅雷 501 驱动 Driver to

start driver and software

installation.

EN - 7

Check/uncheck on the options and

click on Next to continue or

Cancel to exit installation.

Click on Browse to select or type in

desired installation path. Click on

Install to continue, Back to

previous page or Cancel to exit

installation.

Press Close to complete

installation when prompted.

Warning:

It is strongly recommended to remove any other existing

mouse driver before installing CCR-MSG02 driver in the

same system. Failure to comply may result in device/driver

conflict or malfunction.

It is strongly recommended to disable all other Language

Input Methods except English Input Method while executing

the gaming software.

EN - 8

4 Basic Operations

4.1 4-Direction Wheel Button

Vertical Scrolling: Roll 4-Direction

Wheel Button up/down to scroll

page up/down.

Horizontal Scrolling: Tilt

4-Direction Wheel Button

left/right to scroll page left/right.

4-Direction Wheel Button can

also be assigned to Macro

functions. Please refer to sections

below for more detailed

instructions.

NOTE:

Horizontal scrolling requires driver

installed in PC or Notebook.

4.2 DPI Settings

Push the DPI Switch forward or

backward to toggle between DPI

resolution levels.

Current DPI resolution level is

displayed on DPI display LED.

Changes of DPI resolution level are

simultaneously reflected on the

display.

NOTE:

DPI resolution level can only be

toggled/adjusted after the gaming

software is installed.

DPI resolution level can be

independently defined by user

preference through gaming

software.

EN - 9

4.3 Gaming Mode Settings

Press Mode Switching Button to

toggle between 7 different gaming

modes.

Current gaming is displayed on

Mode display LED. Each Mode is

represented by a different color on

the display.

LED on the front and rear ends of

device will also be displaying color

in accordance to mode change.

NOTE:

Gaming mode can only be

toggled/adjusted after the gaming

software is installed.

4.4 Programmable Buttons

A total of 9 programmable buttons

are capable of Macro function

assignment.

Each button can be assigned up to

7 different Macro functions in

accordance to 7 different modes.

NOTE:

Button 3 and Button 4 are by

default Internet Forward and

Backward buttons.

Programmable buttons can only be

assigned with Macro function(s)

after the gaming software is

installed.

1

2

3

4

5

6

7

8

9

EN - 10

4.5 Adjustable Lift Button

Please select a surface the device

will be working with.

Press and hold Lift Adjusting

Button and quickly move device

on the surface for up to 3 seconds.

The DPI Display LED will be

blinking during the process.

Release the button when DPI

Display LED stops blinking.

4.6 Interchangeable Rubber Finger Grip

Press Finger Grip Release

Button to release Finger Grip

piece.

Insert alternate Finger Grip in the

direction as shown.

EN - 11

4.7 Adjusting Weight

Release Finger Grip as shown in

the above section.

Press Weight Cartridge Release

Button to release weight

cartridge.

Add/Remove Weight Piece(s) in

the cartridge as desired.

Unused Weight Piece(s) can be

stored in the Weight Box.

Warning:

Please keep Weight Pieces from reach of children.

Ceramic footpads may cause minor damages/scratches on

surface the device is in contact with due to its rigid nature.

EN - 12

5 Using Gaming Software

Upon successful installation of Gaming Software, click on Gaming Software icon

located at Windows Notification Area or click on Start Programs Gaming Mouse

Gaming Mouse to start the application.

5.1 Button Settings

Profile Management

A total of 7 Profiles is available for storing Scripts. Each Profile represents

a customized gaming button setting group and is capable of storing up to 9

different buttons assigned with Scripts.

Profiles are numbered from 1 to 7 and each profile is assigned with a unique

color. Simply press Mode Button to cycle through 7 Modes or click on

desired Mode to select it.

To rename a profile, double-click on the Profile Name text box and type in

desired character strings (up to 64 alphanumerical characters). Press Enter

or click on anywhere other than the text box to confirm and complete

renaming.

EN - 13

Button Assignment

Press Mode Button to cycle through 7 Modes or click on desired mode to

select it.

Click on, hold, and drag the user-predefined Script from Macro List to 1 of

9 buttons to complete button assignment.

Click on, hold, and release the already assigned button anywhere other than

the button itself to discard assignment.

NOTE:

Scroll up and Scroll down buttons can not be assigned as firemode.

EN - 14

5.2 Macro Settings

Macro List Window

User-defined Macros are stored in Macro List. Macro functions can be

organized into different Groups with user-defined names.

To create a new Group, click on Add a new folder icon and type in desired

character strings (up to 28 alphanumerical characters) in the text box. Press

Enter or click on anywhere other than the text box to confirm and complete

process.

To rename a Group/Macro, double-click on the Group/Macro text box and

type in desired character strings (up to 28 alphanumerical characters). Press

Enter or click on anywhere other than the text box to confirm and complete

renaming.

To delete a Group or a Macro, click on, hold, and drag the entity from Macro

List to . Click on OK to confirm deletion and Cancel to cancel action. All

Macros in the deleted Group will be moved under Ungrouped Group.

EN - 15

Macro Editor Window

Macro Editor allows user to record/define Commands, collect them into

one single Script, and store the Script as Macro function in the Macro List

for button assignment.

Please follow below procedures to edit Macro:

1. Double-click response type to cycle through from (Commands are

executed once), (Commands are executed repeatedly, and

(Commands are executed 3 times).

2. Place a check mark on Record the duration or intervals option to

record all time duration or intervals between keystrokes/mouse clicks.

3. Click on to start command recording session. Press keys on

keyboard, click buttons on mouse, or combination of both to record

command inputs. Click on or press Pause Break on

keyboard to stop recording. Click on to clear all Commands

on Macro Editor window.

4. Click on, hold, and drag the Commands from Macro Editor window to

a Group in Macro List window to save as Macro function. Type in

desired character strings (up to 28 alphanumerical characters). Press

Enter or click on anywhere other than the text box to confirm and

complete naming.

EN - 16

5. Click on, hold, and drag the Commands from Macro Editor window to

to delete Commands.

6. Edited Commands can be saved onto host PC or loaded into Gaming

Software for later use. Simply click on to save Commands in

*.inf file or click on to restore Commands from file.

Aside from recording keyboard/mouse actions, Commands can also be

manually edited. Double-click on the desired Command to modify its

attribute.

Commands can also be manually entered by clicking and dragging the

Function buttons from function button window to Macro Editor window:

Insert Duration of Intervals:

Click on, hold, and drag the icon to Macro Editor window to insert time

duration. Double-click on the command and type in desired value to define

actual duration.

Insert Key-Down Command:

Click on, hold, and drag the icon to Macro Editor window to insert key-down

command. Press a key on keyboard to assign a key pressed.

Insert Key-Up Command:

Click on, hold, and drag the icon to Macro Editor window to insert key-up

command. Press a key on keyboard to assign a key released.

EN - 17

Insert Click-Mouse-Button Command:

Click on, hold, and drag the icon to Macro Editor window to insert

mouse-button-click command. Click on a mouse button to assign a mouse

button clicked.

Insert Release-Mouse-Button Command:

Click on, hold, and drag the icon to Macro Editor window to insert

mouse-button-release command. Click on a mouse button to assign a mouse

button released.

Insert Scrolling Command:

Click on, hold, and drag the icon to Macro Editor window to insert scrolling

command. Move mouse scroll up/down to assign a scroll movement.

EN - 18

5.3 Macro Settings

DPI Adjustment

The device is capable of 4 level DPI resolution adjustment from 90 DPI to

5040 DPI where X-axis and Y-axis resolution can be adjusted

independently from each other.

Click on the corresponding number or push DPI Switch forward/backward

to locate desired DPI level for adjustment.

Click and drag the X-axis or Y-axis bar slider to adjust DPI resolution. The

new resolution values will be automatically saved in the device.

Click on the link icon to associate/disassociate locking adjustment. When the

link icon appears to be broken, X-axis and Y-axis DPI level can be adjusted

independently from each other.

EN - 19

6 Appendix

Model Name CCR-MSG02

Lens Laser Lens

Light Source Laser Diode

Resolution 90 DPI ~ 5040 DPI

Maximum Acceleration 30G

Frame Rate 12000 fps

Maximum Tracking Speed 150 ips

Operation Modes 5

OS Supported Windows XP / Vista / 7

Weight ~200g

Dimensions 126.3mm X 85mm X 42mm (L*W*D)