Upload File

usb-to-controlnet cable - rockwell...

  • Home
  • Documents
  • USB-to-ControlNet Cable - Rockwell Automationliterature.rockwellautomation.com/idc/groups/literature/documents/... · USB-to-ControlNet Cable Catalog Number 1784-U2CN Topic Page Important
16
Installation Instructions USB-to-ControlNet Cable Catalog Number 1784-U2CN Topic Page Important User Information 2 Environment and Enclosure 3 About the Cable 4 Install the Cable 5 Status Indicators 9 Specifications 11 Additional Resources 14

Upload: phamnhu

Post on 01-Aug-2018

215 views

Category:

Documents


0 download

Report

TRANSCRIPT

Page 1: USB-to-ControlNet Cable - Rockwell Automationliterature.rockwellautomation.com/idc/groups/literature/documents/... · USB-to-ControlNet Cable Catalog Number 1784-U2CN Topic Page Important

Installation Instructions

USB-to-ControlNet Cable

Catalog Number 1784-U2CN

Topic Page

Important User Information 2

Environment and Enclosure 3

About the Cable 4

Install the Cable 5

Status Indicators 9

Specifications 11

Additional Resources 14

2 USB-to-ControlNet Cable

Important User Information

Solid state equipment has operational characteristics differing from those of electromechanical equipment Safety Guidelines for the Application Installation and Maintenance of Solid State Controls (publication SGI-11 available from your local Rockwell Automation sales office or online at httpliteraturerockwellautomationcom) describes some important differences between solid state equipment and hard-wired electromechanical devices Because of this difference and also because of the wide variety of uses for solid state equipment all persons responsible for applying this equipment must satisfy themselves that each intended application of this equipment is acceptable

In no event will Rockwell Automation Inc be responsible or liable for indirect or consequential damages resulting from the use or application of this equipment

The examples and diagrams in this manual are included solely for illustrative purposes Because of the many variables and requirements associated with any particular installation Rockwell Automation Inc cannot assume responsibility or liability for actual use based on the examples and diagrams

No patent liability is assumed by Rockwell Automation Inc with respect to use of information circuits equipment or software described in this manual

Reproduction of the contents of this manual in whole or in part without written permission of Rockwell Automation Inc is prohibited

Throughout this manual when necessary we use notes to make you aware of safety considerations

WARNING Identifies information about practices or circumstances that can cause an explosion in a hazardous environment which may lead to personal injury or death property damage or economic loss

IMPORTANT Identifies information that is critical for successful application and understanding of the product

ATTENTION Identifies information about practices or circumstances that can lead to personal injury or death property damage or economic loss Attentions help you identify a hazard avoid a hazard and recognize the consequences

Labels may be on or inside the equipment (for example a drive or motor) to alert people that dangerous voltage may be present

Labels may be on or inside the equipment (for example a drive or motor) to alert people that surfaces may reach dangerous temperatures

SHOCK HAZARD

BURN HAZARD

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 3

Environment and Enclosure

At the end of its life this equipment should be collected separately from any unsorted municipal waste

ATTENTION This equipment is intended for use in overvoltage Category II applications (as defined in IEC publication 60664-1) at altitudes up to 2000 m (6562 ft) without deratingThis equipment is considered Group 1 Class A industrial equipment according to IECCISPR Publication 11 Without appropriate precautions there may be potential difficulties ensuring electromagnetic compatibility in other environments due to conducted as well as radiated disturbanceThis equipment is supplied as enclosed equipment It should not require additional system enclosure when used in locations consistent with the enclosure type ratings stated in the Specifications section of this publication Subsequent sections of this publication may contain additional information regarding specific enclosure type ratings beyond what this product provides that are required to comply with certain product safety certifications

In addition to this publication see the following publications

bull publication 1770-41 Industrial Automation Wiring and Grounding Guidelines for additional installation requirements

bull NEMA Standards publication 250 and IEC publication 60529 as applicable for explanations of the degrees of protection provided by different types of enclosures

Publication 1784-IN047A-EN-P - November 2008

4 USB-to-ControlNet Cable

About the CableThe 1784-U2CN USB-to-ControlNet cable lets you connect a notebook or desktop computer to a ControlNet network by using an unused USB port on the computer The product replaces the 1784-PCC communication card for computers that do not have PCMCIA slots

IMPORTANT To comply with the CE Low Voltage Directive (LVD) this equipment must be powered from a source compliant with Safety Extra Low Voltage (SELV) or Protected Extra Low Voltage (PELV)

USB Cable

Status Indicators

RJ45 ControlNet Network Connector

Node Address Switches

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 5

Install the CableFollow these procedures to install the cable

Obtain the Device Driver for the Cable

Follow these steps to download and install the device driver for the cable

1 Visit httpwwwrockwellautomationcomknowledgebase

2 Open tech note ID 55431 and follow the instructions in the tech note to install the driver

ATTENTION This equipment is sensitive to electrostatic discharge which can cause internal damage and affect normal operation Follow these guidelines when you handle this equipmentbull Touch a grounded object to discharge potential static

bull Do not touch connectors or pins

bull Store the equipment in appropriate static-safe packaging when not in use

IMPORTANT A minimum of RSLinx Classic software version 251 is required for use with the cable

IMPORTANT If RSLinx Classic software version 254 or later is installed on the computer the device driver is already installed on the computer Skip this section

Publication 1784-IN047A-EN-P - November 2008

6 USB-to-ControlNet Cable

Configure and Connect the Cable

1 Use the rotary switches to set the module node address to a valid number (1hellip99)

2 Insert the end of the cable having the USB connector into a USB port on a computer

ATTENTION USB and ControlNet connection lengths must be less than 3 meters Do not attempt to extend the cables

Node Address (Rotary) Switches

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 7

3 Insert the end of the cable having the RJ45 network connector into the ControlNet network access port (NAP) of a ControlNet network-enabled device

Traffic Analyzer Software

The 1784-U2CN cable is designed to work with Frontlinersquos NetDecoder traffic analyzer software For more information on Frontlinersquos product go to either httpwwwrockwellautomationcomencompass or httpwwwftecom

USB Cable

RJ45 ControlNet Network Connector

Publication 1784-IN047A-EN-P - November 2008

8 USB-to-ControlNet Cable

Product Dimensions

The following illustration shows the product dimensions

USB Cable Length 061 m (2 ft)

Enclosure Length 762 cm (3 in) Width 508 cm (2 in) Thickness 254 cm (1 in)

ControlNet NAP Cable Length 305 m (10 ft)

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 9

Status IndicatorsThe following table describes the cable status indicators

Indicator Status Description

USB Green The cable is configured but no network traffic is present

Flashing green Network traffic is present

Off Unable to transfer data

bull Disconnected from host

bull In one of the following states

ndash default

ndash powered

ndash address

ndash suspend

USB

ControlNet Network Status

Module Status

Publication 1784-IN047A-EN-P - November 2008

10 USB-to-ControlNet Cable

Module Status (MS) Green The cable is operating normally

Off No power to the cable

Flashing green The cable is operating in a normal condition and is online with no connections established

bull The cable may be in Standby mode

bull The cable needs commissioning due to missing incomplete or incorrect configuration

Flashing red The cable has a recoverable fault

Red The cable has an unrecoverable fault and may need to be replaced

Flashing redgreen

The cable is performing a self-test

ControlNet Network Status (NS)

Off Not on network

Red Network interface faulted

Flashing redgreen

Invalid network configuration (for example a MAC ID above UMAX)

Flashing red bull Duplicate node detected

bull Link fault

bull No MAC frames received

Flashing green bull Temporary channel error

bull Listen only

Green Normal operation MAC frame received without error

Indicator Status Description

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 11

Specifications

USB-to-ControlNet Cable Catalog Number 1784-U2CN

Attribute Value

Enclosure type rating Meets IP30

Power dissipation max 05 W

Supply voltage 500V DC 525V DC max

Supply current 75 mA

Power consumption max 05 W

Isolation voltage 30V continuous Basic Insulation Type Type tested at 500V AC for 60 s ControlNet to USB

Wiring category(1)

(1) Use this Conductor Category information for planning conductor routing Refer to Industrial Automation Wiring and Grounding Guidelines publication 1770-41

2 - on communication ports

ControlNet current value 70 mA 24V

Publication 1784-IN047A-EN-P - November 2008

12 USB-to-ControlNet Cable

Environmental Specifications

Attribute Value

Temperature operating

IEC 60068-2-1 (Test Ad Operating Cold) IEC 60068-2-2 (Test Bd Operating Dry Heat) IEC 60068-2-14 (Test Nb Operating Thermal Shock) 0hellip55 degC (32hellip131 degF)

Temperature nonoperating

IEC 60068-2-1 (Test Ab Unpackaged Nonoperating Cold) IEC 60068-2-2 (Test Bb Unpackaged Nonoperating Dry Heat) IEC 60068-2-14 (Test Na Unpackaged Nonoperating Thermal Shock) -10hellip85 degC (14hellip185 degF)

Relative humidity IEC 60068-2-30 (Test Db Unpackaged Damp Heat) 5hellip95 noncondensing

Nonoperating shock IEC 60068-2-27 (Test Ea Unpackaged Shock) 1000 mm (328 ft)

Emissions CISPR 11 Group 1 Class A

ESD immunity IEC 61000-4-2 8 kV air discharges

Radiated RF immunity IEC 61000-4-3 10Vm with 1 kHz sine-wave 80 AM from 80hellip2000 MHz 10Vm with 200 Hz 50 Pulse 100 AM at 900 MHz 10Vm with 200 Hz 50 Pulse 100 AM at 1890 MHz 10Vm with 1 kHz sine-wave 80 AM from 2000hellip2700 MHz

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 13

Certifications

Certifications (when product is marked)(1)

Value

c-UL-us UL Listed Industrial Control Equipment certified for US and Canada See UL File E65584

CE European Union 2004108EC EMC Directive compliant with EN 61326-1 MeasControlLab Industrial Requirements EN 61000-6-2 Industrial Immunity EN 61000-6-4 Industrial Emissions EN 61131-2 Programmable Controllers (Clause 8 Zone A amp B)

C-Tick Australian Radiocommunications Act compliant with ASNZS CISPR 11 Industrial Emissions

CI ControlNet International conformance tested to ControlNet specifications

(1) See the Product Certification link at httpwwwabcom for Declarations of Conformity Certificates and other certification details

Publication 1784-IN047A-EN-P - November 2008

14 USB-to-ControlNet Cable

Additional ResourcesThese documents contain additional information concerning related Rockwell Automation products

Resource Description

ControlNet Coax Media Planning and Installation Guide publication CNET-IN002

Provides ControlNet network planning information

Industrial Automation Wiring and Grounding Guidelines publication 1770-41

Provides general guidelines for installing a Rockwell Automation industrial system

Product Certifications website httpwwwabcom

Provides declarations of conformity certificates and other certification details

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 15

Notes

Publication 1784-IN047A-EN-P - November 2008

Rockwell Automation SupportRockwell Automation provides technical information on the Web to assist you in using its products At httpsupportrockwellautomationcom you can find technical manuals a knowledge base of FAQs technical and application notes sample code and links to software service packs and a MySupport feature that you can customize to make the best use of these tools

For an additional level of technical phone support for installation configuration and troubleshooting we offer TechConnect support programs For more information contact your local distributor or Rockwell Automation representative or visit httpsupportrockwellautomationcom

Installation Assistance

If you experience a problem within the first 24 hours of installation please review the information thats contained in this manual You can also contact a special Customer Support number for initial help in getting your product up and running

New Product Satisfaction Return

Rockwell Automation tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility However if your product is not functioning and needs to be returned follow these procedures

Allen-Bradley Data Highway Plus DH+ PLC-5 RSLinx Rockwell Automation SLC and TechConnect are trademarks of Rockwell Automation Inc

Trademarks not belonging to Rockwell Automation are property of their respective companies

United States 14406463434 Monday ndash Friday 8 am ndash 5 pm EST

Outside United States Please contact your local Rockwell Automation representative for any technical support issues

United States Contact your distributor You must provide a Customer Support case number (see phone number above to obtain one) to your distributor in order to complete the return process

Outside United States Please contact your local Rockwell Automation representative for the return procedure

Publication 1784-IN047A-EN-P - November 2008 PN-25192Copyright copy 2008 Rockwell Automation Inc All rights reserved Printed in the USA

  • Publication 1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions
    • Important User Information
    • Environment and Enclosure
    • About the Cable
    • Install the Cable
      • Obtain the Device Driver for the Cable
      • Configure and Connect the Cable
      • Traffic Analyzer Software
      • Product Dimensions
        • Status Indicators
        • Specifications
        • Additional Resources
        • Back Cover

            • ltlt ASCII85EncodePages false AllowTransparency false AutoPositionEPSFiles false AutoRotatePages None Binding Left CalGrayProfile (Gray Gamma 22) CalRGBProfile (sRGB IEC61966-21) CalCMYKProfile (Euroscale Uncoated v2) sRGBProfile (sRGB IEC61966-21) CannotEmbedFontPolicy Error CompatibilityLevel 14 CompressObjects Tags CompressPages true ConvertImagesToIndexed true PassThroughJPEGImages true CreateJDFFile false CreateJobTicket true DefaultRenderingIntent Default DetectBlends true DetectCurves 00000 ColorConversionStrategy LeaveColorUnchanged DoThumbnails false EmbedAllFonts true EmbedOpenType false ParseICCProfilesInComments true EmbedJobOptions true DSCReportingLevel 0 EmitDSCWarnings false EndPage -1 ImageMemory 1048576 LockDistillerParams true MaxSubsetPct 99 Optimize true OPM 1 ParseDSCComments false ParseDSCCommentsForDocInfo false PreserveCopyPage true PreserveDICMYKValues true PreserveEPSInfo false PreserveFlatness true PreserveHalftoneInfo true PreserveOPIComments false PreserveOverprintSettings true StartPage 1 SubsetFonts false TransferFunctionInfo Apply UCRandBGInfo Preserve UsePrologue false ColorSettingsFile (None) AlwaysEmbed [ true ArialMT ] NeverEmbed [ true ] AntiAliasColorImages false CropColorImages true ColorImageMinResolution 150 ColorImageMinResolutionPolicy OK DownsampleColorImages true ColorImageDownsampleType Bicubic ColorImageResolution 150 ColorImageDepth 8 ColorImageMinDownsampleDepth 1 ColorImageDownsampleThreshold 100000 EncodeColorImages true ColorImageFilter FlateEncode AutoFilterColorImages false ColorImageAutoFilterStrategy JPEG ColorACSImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt ColorImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt JPEG2000ColorACSImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt JPEG2000ColorImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt AntiAliasGrayImages false CropGrayImages true GrayImageMinResolution 150 GrayImageMinResolutionPolicy OK DownsampleGrayImages true GrayImageDownsampleType Bicubic GrayImageResolution 150 GrayImageDepth 8 GrayImageMinDownsampleDepth 2 GrayImageDownsampleThreshold 100000 EncodeGrayImages true GrayImageFilter FlateEncode AutoFilterGrayImages false GrayImageAutoFilterStrategy JPEG GrayACSImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt GrayImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt JPEG2000GrayACSImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt JPEG2000GrayImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt AntiAliasMonoImages false CropMonoImages true MonoImageMinResolution 900 MonoImageMinResolutionPolicy OK DownsampleMonoImages true MonoImageDownsampleType Bicubic MonoImageResolution 900 MonoImageDepth -1 MonoImageDownsampleThreshold 100000 EncodeMonoImages true MonoImageFilter CCITTFaxEncode MonoImageDict ltlt K -1 gtgt AllowPSXObjects true CheckCompliance [ None ] PDFX1aCheck false PDFX3Check false PDFXCompliantPDFOnly false PDFXNoTrimBoxError true PDFXTrimBoxToMediaBoxOffset [ 000000 000000 000000 000000 ] PDFXSetBleedBoxToMediaBox true PDFXBleedBoxToTrimBoxOffset [ 000000 000000 000000 000000 ] PDFXOutputIntentProfile (None) PDFXOutputConditionIdentifier () PDFXOutputCondition () PDFXRegistryName (httpwwwcolororg) PDFXTrapped False SyntheticBoldness 1000000 Description ltlt JPN ltFEFF3053306e8a2d5b9a306f300130d330b830cd30b9658766f8306e8868793a304a3088307353705237306b90693057305f00200050004400460020658766f830924f5c62103059308b3068304d306b4f7f75283057307e305930023053306e8a2d5b9a30674f5c62103057305f00200050004400460020658766f8306f0020004100630072006f0062006100740020304a30883073002000520065006100640065007200200035002e003000204ee5964d30678868793a3067304d307e30593002gt DEU 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 FRA 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 PTB 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 DAN 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 NLD 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 ESP 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 SUO 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 ITA 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 NOR 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 SVE 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 ENU (Rockwell Job Options for Web-only PDF Files) gtgtgtgt setdistillerparamsltlt HWResolution [2540 2540] PageSize [792000 1224000]gtgt setpagedevice

              Intro

              ampLRA-QR005B-EN-E 308

              Generic pub print specs

              ampCItem Setup Sheet for Conversion Transfers
              ampLJIT-D-print SpreadsheetampCRA-QR005C-EN-EampRampD ampT

              IN RN pub type specs

              UM RM PM pub type specs

              AP PP pub type specs

              BR pub type specs

              Field definitions

              ampL04032006ampRampP
              PackagingOrdering Unit Of Measure
              EA = Each
              PK = Pack
              PD = Pad
              RL = Roll
              BK = Book
              CT = Carton
              BX = Box
              ST = Set
              Multiple Order Qty
              Separate methods of ordering same item For example if an item is packaged 50 per pad 5 pads per carton You can set the order qty as 50 each (one pad) or 250 each (1 ctn)
              Business Group
              The business group that the publication supports Your choice here determines the list you choose from for Cost Center
              CorporateBusiness Development
              Finance
              Human Resources
              IT
              Logistics
              Manufacturing
              Marketing Commercial
              Marketing Europe
              Marketing Other
              Operations
              Order Services
              Other
              Process Improvement
              Procurement
              Quality
              Sales
              Max Order Quantity
              Presale items = 100
              Postsale items = 5
              NOTE You can use other quantities but the delivery may take a bit longer because a system admin must approve it
              Item Category - Form (F) or Book (B)
              Form (F) = Any publication that is a single sheet (ie 1 or 2 pages) an envelope or carbonless form
              Book (B) = Any publication that contains 3 or more pages
              BindingStitching
              For a Form (F) use
              CARBONLESS
              CUTSHEET
              ENVELOPE
              For a Book (B) use
              LOOSE LOOSE -Loose Leaf
              PERFECT PERFECT - Perfect Bound
              PLASTCOIL PLASTCOIL - Plastic Coil (Coil Bound)
              SADDLE SADDLE - Saddle Stitch
              STAPLED1 STAPLED1 -1 position
              STAPLED1B STAPLED1B - bottom 1 position
              STAPLED2 STAPLED2 - 2 positions
              THERMAL THERMAL - Thermal bound (Tape bound)
              THERMALO THERMALO - Thermal Bound (Tape bound - offline)
              WIRE O Wire O - Double Wire Bound (offline)
              Saddle-Stitch Items
              20 sheets max on 20 (text and cover)
              19 sheets max on 20 (text) and 24 (cover)
              18 sheets max on 24 (text and cover)
              All page quantities must be divisible by 4
              Tape Bound Items
              125 sheets max on 20 no cover
              120 sheets max wcover (90 index unless indicated otherwise)
              Perfect Bound Items
              475 sheets max on 20 no cover
              470 sheets max wcover (90 index unless indicated otherwise)
              Double Wire Bound Items
              40 sheets max on 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
              Coil Bound Items
              290 sheets max of 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
              Sides Printed
              Head2Head = Most common Double-sided printing with headers on both pages lining up at the top of the page
              Simplex = Single-sided printing
              Head2Toe = Least common Double-sided printing with header on one page lining up with the footer on the other page
              Number of Forms to a Sheet
              Number of publication pages printed on a sheet of paper at the printerFor example if a 4-page 85 x 11 publication is printed on the front and back sides of an 11 x 17 sheet of paper that is folded in half the Number of Forms to a Sheet = 4Example 2 If a 4-page 55 x 85 publication is printed on the front and back sides of an 85 x 11 sheet of paper that is folded in half the Number of forms to a Sheet = 4
              Number of Sheets Required to Print
              Number of sheets of paper required to print the publicationFor example if a 16-page 85 x 11 publication is printed on the front and back sides of four 11 x 17 sheets of paper that are folded in half and saddle stitched together the Number of Sheets Required to Print = 4Example 4 If a 4-page 55 x 85 publication is printed on the front and back sides of one 85 x 11 sheet of paper that is folded in half the Number of Sheets Required to Print = 1
              Paper Stock Type
              Description
              PLAIN Bond
              ACNTCVR Accent Cover
              BOND3H Bond (3-hole)
              BOOKENV Booklet Envelope
              C1SGLOSS C1S Gloss Finish
              C1SMATTE C1S Matt Finish
              C2SGLOSS C2S Gloss Finish
              C2SMATTE C2S Matt Finish
              CARD Card Stock
              CATLGENV Catalog Envelope
              CATLGENV6 6 Catalog Envelope
              COVERCOLOR Color Cover Copy
              CRCKPEEL Crack N Peel Label
              CUSTOM Custom
              CVRFUTURA Futura Cover
              ENV6x9 Standard 6X9 Envelope
              ENV9X12 Standard 9X12 Envelope
              ETHCERT Ethicon Certificate
              GLOSSCOVER Gloss Cover
              GLOSSTEXT Gloss Text
              HOTSTEXT Hots Text
              INDEX Index
              LABEL80 80 Up Label
              MICROPRT Micro Print
              OFFSET Offset
              PART2 2 Part
              PART3 3 Part
              PART4 4 Part
              PART5 5 Part
              PART6 6 Part
              PERF 12 inch Perfed
              PERMMAT Perm Mat Ad
              PRECUTTAB Pre-Cut Tab
              PREPERF Pre-Perforated
              RECYL Recycled
              SE10ENV 10 Standard Envelope
              SE10ITENV 10 Inside Tint Envelope
              SE9ENV 9 Stanard Envelope
              TAG Tag
              TEXT Text
              TEXTCOLOR Text Color Copy
              TEXTFUTURA Futura Text
              TEXTLASER Text Laser Print
              TRANSPRNCY Transparencies
              VELLUM Vellum
              VELLUM3HP Vellum 3HP
              WE10ENV 10 Window Envelope
              WE9ENV 9 Windor Envelope
              WE9ITENV 9 Inside Tint Window Envelope
              Paper Stock Color
              Black
              Blue
              Buff
              Canary
              Cherry
              Clear
              Cream
              Custom
              Goldrenrod
              Gray
              Green
              Ivory
              Lavender
              Manilla
              NCRPinkCanary
              NCRWhiteBlue
              NCRWhiteBlueCanary
              NCRWhiteCanary
              NCRWhiteCanaryPink
              NCRWhiteCanaryPinkGoldenrod
              NCRWhiteGreen
              NCRWhiteGoldenrodYellow
              NCRWhitePink
              NCRWhiteWhite
              Opaque
              Orange
              Orchid
              Peach
              Pink
              Purple
              Salmon
              Tan
              Violet
              White
              Finished Trim Sizes (listed - width x length)
              11 x 17
              18 x 24 Poster
              24 x 36 Poster
              3 x 5
              36 x 24 Poster
              4 x 6
              475 x 7
              475 x 775
              55 x 85
              6 x 4
              7 x 9
              7385 x 9 (RSI Std)
              85 x 11
              825 x 10875
              825 x 11 (RA product profile std)
              8375 x 10875
              9 x 12
              A4
              A5
              Other - Custom size listed below
              Drilling Locations
              1CENTER
              1LEFTTOP
              1TOPCENTER
              2LEFT
              2LEFT2TOP
              2TOP
              2TOP2LEFT
              2TOP3LEFT
              2TOP5LEFT
              2TOP5RIGHT
              3BOTTOM
              3LEFT
              3LEFT2TOP
              3LEFT3TOP
              3RIGHT
              3TOP
              3TOP5LEFT
              5BOTTOM
              5CENTER
              5LEFT
              5RIGHT
              5RIGHT2TOP
              5TOP
              For TRI fold - select Z or C type Description
              HALF Half
              C C Fold
              DBLEPARLL Double Parallel
              OFFSETZ Offset Z
              SAMPLE See Sample
              SHORT Short Fold
              V V Fold
              Z Z Fold
              Number of Pieces per Poly Wrap
              Publication length Number per Poly Wrap
              77 or more pages 1
              33 to 76 pages 25
              3 to 32 pages 50
              1 or 2 pages 100
              Comments
              CoverText Stock Spine
              100 Gloss Cover If your publication uses a spine make note of that in the comments field Be sure to include the spine as the last page of your PDF Do NOT include that page as part of the publication page count Because the addition of a spine will create an odd page count in the PDF contact a Super User to submit your publication via PDFdirect with an exception tool
              100 Gloss Text
              100 Text
              10pt C1S Cover
              10pt C2S Cover
              10pt C2S Text
              10pt Text Stock
              110 White Index
              12pt C1S Cover
              20 White Opaque Bond
              50 Colored Offset
              50 White Offset
              50 White Opaque
              60 Cover Stock
              60 White Offset
              80 Gloss Cover
              80 Gloss Text
              8pt C1S White
              90 White Index
              CoverText Ink
              Black
              Black + 1 PMS color Type in PMS color
              Black + 2 PMS colors Type in PMS colors
              4 color
              4 color over black
              4 color + 1 PMS color Type in PMS color
              4 color over black + 1 PMS color Type in PMS color
              4 color + 2 PMS colors Type in PMS colors
              4 color + aqueous
              4 color + varnish
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Cannot use quote symbol that is---- Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information White RRD must provide this information NA NA NA NA NA NA 85 11 SIDE NA NA NA NA HALF 85 x 11 50 RRD must provide this information
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B NA PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information GLOSS TEXT 80 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA NA NA NA HALF 85 x 11 RRD must provide this information
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              EA 1 1 See DocMan for the Cost Center selections associated with each Business Group Black amp White B PERFECT PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 2 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA 516 3LEFT NA NA NA NA RRD must provide this information Cover Stock = 90 White IndexText Stock = 20 White Opaque BondCover Ink = BlackText Ink = BlackSpine = If included as last page of PDF
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions EA 1 1 Marketing Commercial Marketing Other November 2008 5 Black amp White B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 4 16 4 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 475 7 SIDE NA NA NA HALF 425 x 7 50 RRD must provide this information Text Stock = 20 White Opaque BondText Ink = Black PN-25192
              Corp 17501
              Bill To 69
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions EA 1 1 Marketing Commercial Marketing Other November 2008 5 Black amp White B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 4 16 4 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 475 7 SIDE NA NA NA HALF 425 x 7 50 RRD must provide this information Text Stock = 20 White Opaque BondText Ink = Black PN-25192
              Details of the Rockwell Automation Print Specifications sheet
              This print specifications sheet is designed with multiple purposes- It is a vehicle to get the most accurate print specifications to RA-approved print vendors- It provides authors with an explanation of all necessary fields to complete before attaching the sheet to your PDF- It provides separate tabs so that an author can fill in all fields related to the publication on the Generic tab or publication-specific template-type tabs to minimize the number of fields an author must completeTo facilitate the most efficient use of this sheet we recommend that you click on the publication-specific tab that most closely fits you publication and use that to complete the print specificationsIMPORTANT Because this sheet was constructed using a sheet that RR Donnelley (RRD) uses to load print specifications there are some columns hidden For example the first field you must complete is Column E or Publication Number Columns A to D are used for RRD purposes and with information only representatives of that RA-approved printer can completeDO NOT delete any hidden columns from the tab you choose to use
              Definitions of Each Tab in Sheet
              Generic pub print specs Single sheet with all required columns for necessary specifications None of the columns are completed All must be completed before attaching the sheet to your PDFThis tab has 39 blank fields you must complete via free text type or pull-down menus
              IN RN pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to installation instructions (IN) and release notes (RN) However you can use this sheet for other publications that are similar to INs and RNsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              UM RM PM pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to user manuals (UM) reference manuals (RM) and programming manuals (PM) However you can use this sheet for other publications that are similar to UMs RMs and PMsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              AP PP pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to application solutions (AP) and product profiles (PP) However you can use this sheet for other publications that are similar to APs and PPsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              BR pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to brochures (BR) However you can use this sheet for other publications that are similar to BRsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              Field definitions Description of information fields used throughout the spreadsheet tabs that may not be immediately obvious to a user
              Attach Print Specs to PDF
              For Acrobat 80 follow these steps1 Open the PDF2 Click on DocumentgtAttach A File A new section appears at the bottom of the PDF3 Browse to the MS Excel file with the print specs and add it to the PDFFor Acrobat 70 follow these steps1 Open the PDF2 Click on the Attachments tab next to the publications bookmarks A new section appears at the bottom of the PDF3 Click on the Add button in the bottom section of the PDF4 Browse to the MS Excel file with the print specs and add it to the PDFFor Acrobat 60 follow these steps1 Open the PDF2 Go to the backcover of the PDF3 Click on the Tools pull-down menu4 Click on this sequence of menu options - Advanced Commenting Attach Attach File Tool A paper clip appears5 Click to put the paper clip somewhere on the backcover The browse window appears6 Browse to the MS Excel file with the print specs and add it to the PDFIMPORTANT If you are using Acrobat 50 or earlier please upgrade
              RA-QR005C-EN-E 608
Page 2: USB-to-ControlNet Cable - Rockwell Automationliterature.rockwellautomation.com/idc/groups/literature/documents/... · USB-to-ControlNet Cable Catalog Number 1784-U2CN Topic Page Important

2 USB-to-ControlNet Cable

Important User Information

Solid state equipment has operational characteristics differing from those of electromechanical equipment Safety Guidelines for the Application Installation and Maintenance of Solid State Controls (publication SGI-11 available from your local Rockwell Automation sales office or online at httpliteraturerockwellautomationcom) describes some important differences between solid state equipment and hard-wired electromechanical devices Because of this difference and also because of the wide variety of uses for solid state equipment all persons responsible for applying this equipment must satisfy themselves that each intended application of this equipment is acceptable

In no event will Rockwell Automation Inc be responsible or liable for indirect or consequential damages resulting from the use or application of this equipment

The examples and diagrams in this manual are included solely for illustrative purposes Because of the many variables and requirements associated with any particular installation Rockwell Automation Inc cannot assume responsibility or liability for actual use based on the examples and diagrams

No patent liability is assumed by Rockwell Automation Inc with respect to use of information circuits equipment or software described in this manual

Reproduction of the contents of this manual in whole or in part without written permission of Rockwell Automation Inc is prohibited

Throughout this manual when necessary we use notes to make you aware of safety considerations

WARNING Identifies information about practices or circumstances that can cause an explosion in a hazardous environment which may lead to personal injury or death property damage or economic loss

IMPORTANT Identifies information that is critical for successful application and understanding of the product

ATTENTION Identifies information about practices or circumstances that can lead to personal injury or death property damage or economic loss Attentions help you identify a hazard avoid a hazard and recognize the consequences

Labels may be on or inside the equipment (for example a drive or motor) to alert people that dangerous voltage may be present

Labels may be on or inside the equipment (for example a drive or motor) to alert people that surfaces may reach dangerous temperatures

SHOCK HAZARD

BURN HAZARD

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 3

Environment and Enclosure

At the end of its life this equipment should be collected separately from any unsorted municipal waste

ATTENTION This equipment is intended for use in overvoltage Category II applications (as defined in IEC publication 60664-1) at altitudes up to 2000 m (6562 ft) without deratingThis equipment is considered Group 1 Class A industrial equipment according to IECCISPR Publication 11 Without appropriate precautions there may be potential difficulties ensuring electromagnetic compatibility in other environments due to conducted as well as radiated disturbanceThis equipment is supplied as enclosed equipment It should not require additional system enclosure when used in locations consistent with the enclosure type ratings stated in the Specifications section of this publication Subsequent sections of this publication may contain additional information regarding specific enclosure type ratings beyond what this product provides that are required to comply with certain product safety certifications

In addition to this publication see the following publications

bull publication 1770-41 Industrial Automation Wiring and Grounding Guidelines for additional installation requirements

bull NEMA Standards publication 250 and IEC publication 60529 as applicable for explanations of the degrees of protection provided by different types of enclosures

Publication 1784-IN047A-EN-P - November 2008

4 USB-to-ControlNet Cable

About the CableThe 1784-U2CN USB-to-ControlNet cable lets you connect a notebook or desktop computer to a ControlNet network by using an unused USB port on the computer The product replaces the 1784-PCC communication card for computers that do not have PCMCIA slots

IMPORTANT To comply with the CE Low Voltage Directive (LVD) this equipment must be powered from a source compliant with Safety Extra Low Voltage (SELV) or Protected Extra Low Voltage (PELV)

USB Cable

Status Indicators

RJ45 ControlNet Network Connector

Node Address Switches

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 5

Install the CableFollow these procedures to install the cable

Obtain the Device Driver for the Cable

Follow these steps to download and install the device driver for the cable

1 Visit httpwwwrockwellautomationcomknowledgebase

2 Open tech note ID 55431 and follow the instructions in the tech note to install the driver

ATTENTION This equipment is sensitive to electrostatic discharge which can cause internal damage and affect normal operation Follow these guidelines when you handle this equipmentbull Touch a grounded object to discharge potential static

bull Do not touch connectors or pins

bull Store the equipment in appropriate static-safe packaging when not in use

IMPORTANT A minimum of RSLinx Classic software version 251 is required for use with the cable

IMPORTANT If RSLinx Classic software version 254 or later is installed on the computer the device driver is already installed on the computer Skip this section

Publication 1784-IN047A-EN-P - November 2008

6 USB-to-ControlNet Cable

Configure and Connect the Cable

1 Use the rotary switches to set the module node address to a valid number (1hellip99)

2 Insert the end of the cable having the USB connector into a USB port on a computer

ATTENTION USB and ControlNet connection lengths must be less than 3 meters Do not attempt to extend the cables

Node Address (Rotary) Switches

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 7

3 Insert the end of the cable having the RJ45 network connector into the ControlNet network access port (NAP) of a ControlNet network-enabled device

Traffic Analyzer Software

The 1784-U2CN cable is designed to work with Frontlinersquos NetDecoder traffic analyzer software For more information on Frontlinersquos product go to either httpwwwrockwellautomationcomencompass or httpwwwftecom

USB Cable

RJ45 ControlNet Network Connector

Publication 1784-IN047A-EN-P - November 2008

8 USB-to-ControlNet Cable

Product Dimensions

The following illustration shows the product dimensions

USB Cable Length 061 m (2 ft)

Enclosure Length 762 cm (3 in) Width 508 cm (2 in) Thickness 254 cm (1 in)

ControlNet NAP Cable Length 305 m (10 ft)

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 9

Status IndicatorsThe following table describes the cable status indicators

Indicator Status Description

USB Green The cable is configured but no network traffic is present

Flashing green Network traffic is present

Off Unable to transfer data

bull Disconnected from host

bull In one of the following states

ndash default

ndash powered

ndash address

ndash suspend

USB

ControlNet Network Status

Module Status

Publication 1784-IN047A-EN-P - November 2008

10 USB-to-ControlNet Cable

Module Status (MS) Green The cable is operating normally

Off No power to the cable

Flashing green The cable is operating in a normal condition and is online with no connections established

bull The cable may be in Standby mode

bull The cable needs commissioning due to missing incomplete or incorrect configuration

Flashing red The cable has a recoverable fault

Red The cable has an unrecoverable fault and may need to be replaced

Flashing redgreen

The cable is performing a self-test

ControlNet Network Status (NS)

Off Not on network

Red Network interface faulted

Flashing redgreen

Invalid network configuration (for example a MAC ID above UMAX)

Flashing red bull Duplicate node detected

bull Link fault

bull No MAC frames received

Flashing green bull Temporary channel error

bull Listen only

Green Normal operation MAC frame received without error

Indicator Status Description

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 11

Specifications

USB-to-ControlNet Cable Catalog Number 1784-U2CN

Attribute Value

Enclosure type rating Meets IP30

Power dissipation max 05 W

Supply voltage 500V DC 525V DC max

Supply current 75 mA

Power consumption max 05 W

Isolation voltage 30V continuous Basic Insulation Type Type tested at 500V AC for 60 s ControlNet to USB

Wiring category(1)

(1) Use this Conductor Category information for planning conductor routing Refer to Industrial Automation Wiring and Grounding Guidelines publication 1770-41

2 - on communication ports

ControlNet current value 70 mA 24V

Publication 1784-IN047A-EN-P - November 2008

12 USB-to-ControlNet Cable

Environmental Specifications

Attribute Value

Temperature operating

IEC 60068-2-1 (Test Ad Operating Cold) IEC 60068-2-2 (Test Bd Operating Dry Heat) IEC 60068-2-14 (Test Nb Operating Thermal Shock) 0hellip55 degC (32hellip131 degF)

Temperature nonoperating

IEC 60068-2-1 (Test Ab Unpackaged Nonoperating Cold) IEC 60068-2-2 (Test Bb Unpackaged Nonoperating Dry Heat) IEC 60068-2-14 (Test Na Unpackaged Nonoperating Thermal Shock) -10hellip85 degC (14hellip185 degF)

Relative humidity IEC 60068-2-30 (Test Db Unpackaged Damp Heat) 5hellip95 noncondensing

Nonoperating shock IEC 60068-2-27 (Test Ea Unpackaged Shock) 1000 mm (328 ft)

Emissions CISPR 11 Group 1 Class A

ESD immunity IEC 61000-4-2 8 kV air discharges

Radiated RF immunity IEC 61000-4-3 10Vm with 1 kHz sine-wave 80 AM from 80hellip2000 MHz 10Vm with 200 Hz 50 Pulse 100 AM at 900 MHz 10Vm with 200 Hz 50 Pulse 100 AM at 1890 MHz 10Vm with 1 kHz sine-wave 80 AM from 2000hellip2700 MHz

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 13

Certifications

Certifications (when product is marked)(1)

Value

c-UL-us UL Listed Industrial Control Equipment certified for US and Canada See UL File E65584

CE European Union 2004108EC EMC Directive compliant with EN 61326-1 MeasControlLab Industrial Requirements EN 61000-6-2 Industrial Immunity EN 61000-6-4 Industrial Emissions EN 61131-2 Programmable Controllers (Clause 8 Zone A amp B)

C-Tick Australian Radiocommunications Act compliant with ASNZS CISPR 11 Industrial Emissions

CI ControlNet International conformance tested to ControlNet specifications

(1) See the Product Certification link at httpwwwabcom for Declarations of Conformity Certificates and other certification details

Publication 1784-IN047A-EN-P - November 2008

14 USB-to-ControlNet Cable

Additional ResourcesThese documents contain additional information concerning related Rockwell Automation products

Resource Description

ControlNet Coax Media Planning and Installation Guide publication CNET-IN002

Provides ControlNet network planning information

Industrial Automation Wiring and Grounding Guidelines publication 1770-41

Provides general guidelines for installing a Rockwell Automation industrial system

Product Certifications website httpwwwabcom

Provides declarations of conformity certificates and other certification details

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 15

Notes

Publication 1784-IN047A-EN-P - November 2008

Rockwell Automation SupportRockwell Automation provides technical information on the Web to assist you in using its products At httpsupportrockwellautomationcom you can find technical manuals a knowledge base of FAQs technical and application notes sample code and links to software service packs and a MySupport feature that you can customize to make the best use of these tools

For an additional level of technical phone support for installation configuration and troubleshooting we offer TechConnect support programs For more information contact your local distributor or Rockwell Automation representative or visit httpsupportrockwellautomationcom

Installation Assistance

If you experience a problem within the first 24 hours of installation please review the information thats contained in this manual You can also contact a special Customer Support number for initial help in getting your product up and running

New Product Satisfaction Return

Rockwell Automation tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility However if your product is not functioning and needs to be returned follow these procedures

Allen-Bradley Data Highway Plus DH+ PLC-5 RSLinx Rockwell Automation SLC and TechConnect are trademarks of Rockwell Automation Inc

Trademarks not belonging to Rockwell Automation are property of their respective companies

United States 14406463434 Monday ndash Friday 8 am ndash 5 pm EST

Outside United States Please contact your local Rockwell Automation representative for any technical support issues

United States Contact your distributor You must provide a Customer Support case number (see phone number above to obtain one) to your distributor in order to complete the return process

Outside United States Please contact your local Rockwell Automation representative for the return procedure

Publication 1784-IN047A-EN-P - November 2008 PN-25192Copyright copy 2008 Rockwell Automation Inc All rights reserved Printed in the USA

  • Publication 1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions
    • Important User Information
    • Environment and Enclosure
    • About the Cable
    • Install the Cable
      • Obtain the Device Driver for the Cable
      • Configure and Connect the Cable
      • Traffic Analyzer Software
      • Product Dimensions
        • Status Indicators
        • Specifications
        • Additional Resources
        • Back Cover

            • ltlt ASCII85EncodePages false AllowTransparency false AutoPositionEPSFiles false AutoRotatePages None Binding Left CalGrayProfile (Gray Gamma 22) CalRGBProfile (sRGB IEC61966-21) CalCMYKProfile (Euroscale Uncoated v2) sRGBProfile (sRGB IEC61966-21) CannotEmbedFontPolicy Error CompatibilityLevel 14 CompressObjects Tags CompressPages true ConvertImagesToIndexed true PassThroughJPEGImages true CreateJDFFile false CreateJobTicket true DefaultRenderingIntent Default DetectBlends true DetectCurves 00000 ColorConversionStrategy LeaveColorUnchanged DoThumbnails false EmbedAllFonts true EmbedOpenType false ParseICCProfilesInComments true EmbedJobOptions true DSCReportingLevel 0 EmitDSCWarnings false EndPage -1 ImageMemory 1048576 LockDistillerParams true MaxSubsetPct 99 Optimize true OPM 1 ParseDSCComments false ParseDSCCommentsForDocInfo false PreserveCopyPage true PreserveDICMYKValues true PreserveEPSInfo false PreserveFlatness true PreserveHalftoneInfo true PreserveOPIComments false PreserveOverprintSettings true StartPage 1 SubsetFonts false TransferFunctionInfo Apply UCRandBGInfo Preserve UsePrologue false ColorSettingsFile (None) AlwaysEmbed [ true ArialMT ] NeverEmbed [ true ] AntiAliasColorImages false CropColorImages true ColorImageMinResolution 150 ColorImageMinResolutionPolicy OK DownsampleColorImages true ColorImageDownsampleType Bicubic ColorImageResolution 150 ColorImageDepth 8 ColorImageMinDownsampleDepth 1 ColorImageDownsampleThreshold 100000 EncodeColorImages true ColorImageFilter FlateEncode AutoFilterColorImages false ColorImageAutoFilterStrategy JPEG ColorACSImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt ColorImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt JPEG2000ColorACSImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt JPEG2000ColorImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt AntiAliasGrayImages false CropGrayImages true GrayImageMinResolution 150 GrayImageMinResolutionPolicy OK DownsampleGrayImages true GrayImageDownsampleType Bicubic GrayImageResolution 150 GrayImageDepth 8 GrayImageMinDownsampleDepth 2 GrayImageDownsampleThreshold 100000 EncodeGrayImages true GrayImageFilter FlateEncode AutoFilterGrayImages false GrayImageAutoFilterStrategy JPEG GrayACSImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt GrayImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt JPEG2000GrayACSImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt JPEG2000GrayImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt AntiAliasMonoImages false CropMonoImages true MonoImageMinResolution 900 MonoImageMinResolutionPolicy OK DownsampleMonoImages true MonoImageDownsampleType Bicubic MonoImageResolution 900 MonoImageDepth -1 MonoImageDownsampleThreshold 100000 EncodeMonoImages true MonoImageFilter CCITTFaxEncode MonoImageDict ltlt K -1 gtgt AllowPSXObjects true CheckCompliance [ None ] PDFX1aCheck false PDFX3Check false PDFXCompliantPDFOnly false PDFXNoTrimBoxError true PDFXTrimBoxToMediaBoxOffset [ 000000 000000 000000 000000 ] PDFXSetBleedBoxToMediaBox true PDFXBleedBoxToTrimBoxOffset [ 000000 000000 000000 000000 ] PDFXOutputIntentProfile (None) PDFXOutputConditionIdentifier () PDFXOutputCondition () PDFXRegistryName (httpwwwcolororg) PDFXTrapped False SyntheticBoldness 1000000 Description ltlt JPN ltFEFF3053306e8a2d5b9a306f300130d330b830cd30b9658766f8306e8868793a304a3088307353705237306b90693057305f00200050004400460020658766f830924f5c62103059308b3068304d306b4f7f75283057307e305930023053306e8a2d5b9a30674f5c62103057305f00200050004400460020658766f8306f0020004100630072006f0062006100740020304a30883073002000520065006100640065007200200035002e003000204ee5964d30678868793a3067304d307e30593002gt DEU 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 FRA 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 PTB 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 DAN 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 NLD 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 ESP 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 SUO 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 ITA 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 NOR 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 SVE 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 ENU (Rockwell Job Options for Web-only PDF Files) gtgtgtgt setdistillerparamsltlt HWResolution [2540 2540] PageSize [792000 1224000]gtgt setpagedevice

              Intro

              ampLRA-QR005B-EN-E 308

              Generic pub print specs

              ampCItem Setup Sheet for Conversion Transfers
              ampLJIT-D-print SpreadsheetampCRA-QR005C-EN-EampRampD ampT

              IN RN pub type specs

              UM RM PM pub type specs

              AP PP pub type specs

              BR pub type specs

              Field definitions

              ampL04032006ampRampP
              PackagingOrdering Unit Of Measure
              EA = Each
              PK = Pack
              PD = Pad
              RL = Roll
              BK = Book
              CT = Carton
              BX = Box
              ST = Set
              Multiple Order Qty
              Separate methods of ordering same item For example if an item is packaged 50 per pad 5 pads per carton You can set the order qty as 50 each (one pad) or 250 each (1 ctn)
              Business Group
              The business group that the publication supports Your choice here determines the list you choose from for Cost Center
              CorporateBusiness Development
              Finance
              Human Resources
              IT
              Logistics
              Manufacturing
              Marketing Commercial
              Marketing Europe
              Marketing Other
              Operations
              Order Services
              Other
              Process Improvement
              Procurement
              Quality
              Sales
              Max Order Quantity
              Presale items = 100
              Postsale items = 5
              NOTE You can use other quantities but the delivery may take a bit longer because a system admin must approve it
              Item Category - Form (F) or Book (B)
              Form (F) = Any publication that is a single sheet (ie 1 or 2 pages) an envelope or carbonless form
              Book (B) = Any publication that contains 3 or more pages
              BindingStitching
              For a Form (F) use
              CARBONLESS
              CUTSHEET
              ENVELOPE
              For a Book (B) use
              LOOSE LOOSE -Loose Leaf
              PERFECT PERFECT - Perfect Bound
              PLASTCOIL PLASTCOIL - Plastic Coil (Coil Bound)
              SADDLE SADDLE - Saddle Stitch
              STAPLED1 STAPLED1 -1 position
              STAPLED1B STAPLED1B - bottom 1 position
              STAPLED2 STAPLED2 - 2 positions
              THERMAL THERMAL - Thermal bound (Tape bound)
              THERMALO THERMALO - Thermal Bound (Tape bound - offline)
              WIRE O Wire O - Double Wire Bound (offline)
              Saddle-Stitch Items
              20 sheets max on 20 (text and cover)
              19 sheets max on 20 (text) and 24 (cover)
              18 sheets max on 24 (text and cover)
              All page quantities must be divisible by 4
              Tape Bound Items
              125 sheets max on 20 no cover
              120 sheets max wcover (90 index unless indicated otherwise)
              Perfect Bound Items
              475 sheets max on 20 no cover
              470 sheets max wcover (90 index unless indicated otherwise)
              Double Wire Bound Items
              40 sheets max on 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
              Coil Bound Items
              290 sheets max of 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
              Sides Printed
              Head2Head = Most common Double-sided printing with headers on both pages lining up at the top of the page
              Simplex = Single-sided printing
              Head2Toe = Least common Double-sided printing with header on one page lining up with the footer on the other page
              Number of Forms to a Sheet
              Number of publication pages printed on a sheet of paper at the printerFor example if a 4-page 85 x 11 publication is printed on the front and back sides of an 11 x 17 sheet of paper that is folded in half the Number of Forms to a Sheet = 4Example 2 If a 4-page 55 x 85 publication is printed on the front and back sides of an 85 x 11 sheet of paper that is folded in half the Number of forms to a Sheet = 4
              Number of Sheets Required to Print
              Number of sheets of paper required to print the publicationFor example if a 16-page 85 x 11 publication is printed on the front and back sides of four 11 x 17 sheets of paper that are folded in half and saddle stitched together the Number of Sheets Required to Print = 4Example 4 If a 4-page 55 x 85 publication is printed on the front and back sides of one 85 x 11 sheet of paper that is folded in half the Number of Sheets Required to Print = 1
              Paper Stock Type
              Description
              PLAIN Bond
              ACNTCVR Accent Cover
              BOND3H Bond (3-hole)
              BOOKENV Booklet Envelope
              C1SGLOSS C1S Gloss Finish
              C1SMATTE C1S Matt Finish
              C2SGLOSS C2S Gloss Finish
              C2SMATTE C2S Matt Finish
              CARD Card Stock
              CATLGENV Catalog Envelope
              CATLGENV6 6 Catalog Envelope
              COVERCOLOR Color Cover Copy
              CRCKPEEL Crack N Peel Label
              CUSTOM Custom
              CVRFUTURA Futura Cover
              ENV6x9 Standard 6X9 Envelope
              ENV9X12 Standard 9X12 Envelope
              ETHCERT Ethicon Certificate
              GLOSSCOVER Gloss Cover
              GLOSSTEXT Gloss Text
              HOTSTEXT Hots Text
              INDEX Index
              LABEL80 80 Up Label
              MICROPRT Micro Print
              OFFSET Offset
              PART2 2 Part
              PART3 3 Part
              PART4 4 Part
              PART5 5 Part
              PART6 6 Part
              PERF 12 inch Perfed
              PERMMAT Perm Mat Ad
              PRECUTTAB Pre-Cut Tab
              PREPERF Pre-Perforated
              RECYL Recycled
              SE10ENV 10 Standard Envelope
              SE10ITENV 10 Inside Tint Envelope
              SE9ENV 9 Stanard Envelope
              TAG Tag
              TEXT Text
              TEXTCOLOR Text Color Copy
              TEXTFUTURA Futura Text
              TEXTLASER Text Laser Print
              TRANSPRNCY Transparencies
              VELLUM Vellum
              VELLUM3HP Vellum 3HP
              WE10ENV 10 Window Envelope
              WE9ENV 9 Windor Envelope
              WE9ITENV 9 Inside Tint Window Envelope
              Paper Stock Color
              Black
              Blue
              Buff
              Canary
              Cherry
              Clear
              Cream
              Custom
              Goldrenrod
              Gray
              Green
              Ivory
              Lavender
              Manilla
              NCRPinkCanary
              NCRWhiteBlue
              NCRWhiteBlueCanary
              NCRWhiteCanary
              NCRWhiteCanaryPink
              NCRWhiteCanaryPinkGoldenrod
              NCRWhiteGreen
              NCRWhiteGoldenrodYellow
              NCRWhitePink
              NCRWhiteWhite
              Opaque
              Orange
              Orchid
              Peach
              Pink
              Purple
              Salmon
              Tan
              Violet
              White
              Finished Trim Sizes (listed - width x length)
              11 x 17
              18 x 24 Poster
              24 x 36 Poster
              3 x 5
              36 x 24 Poster
              4 x 6
              475 x 7
              475 x 775
              55 x 85
              6 x 4
              7 x 9
              7385 x 9 (RSI Std)
              85 x 11
              825 x 10875
              825 x 11 (RA product profile std)
              8375 x 10875
              9 x 12
              A4
              A5
              Other - Custom size listed below
              Drilling Locations
              1CENTER
              1LEFTTOP
              1TOPCENTER
              2LEFT
              2LEFT2TOP
              2TOP
              2TOP2LEFT
              2TOP3LEFT
              2TOP5LEFT
              2TOP5RIGHT
              3BOTTOM
              3LEFT
              3LEFT2TOP
              3LEFT3TOP
              3RIGHT
              3TOP
              3TOP5LEFT
              5BOTTOM
              5CENTER
              5LEFT
              5RIGHT
              5RIGHT2TOP
              5TOP
              For TRI fold - select Z or C type Description
              HALF Half
              C C Fold
              DBLEPARLL Double Parallel
              OFFSETZ Offset Z
              SAMPLE See Sample
              SHORT Short Fold
              V V Fold
              Z Z Fold
              Number of Pieces per Poly Wrap
              Publication length Number per Poly Wrap
              77 or more pages 1
              33 to 76 pages 25
              3 to 32 pages 50
              1 or 2 pages 100
              Comments
              CoverText Stock Spine
              100 Gloss Cover If your publication uses a spine make note of that in the comments field Be sure to include the spine as the last page of your PDF Do NOT include that page as part of the publication page count Because the addition of a spine will create an odd page count in the PDF contact a Super User to submit your publication via PDFdirect with an exception tool
              100 Gloss Text
              100 Text
              10pt C1S Cover
              10pt C2S Cover
              10pt C2S Text
              10pt Text Stock
              110 White Index
              12pt C1S Cover
              20 White Opaque Bond
              50 Colored Offset
              50 White Offset
              50 White Opaque
              60 Cover Stock
              60 White Offset
              80 Gloss Cover
              80 Gloss Text
              8pt C1S White
              90 White Index
              CoverText Ink
              Black
              Black + 1 PMS color Type in PMS color
              Black + 2 PMS colors Type in PMS colors
              4 color
              4 color over black
              4 color + 1 PMS color Type in PMS color
              4 color over black + 1 PMS color Type in PMS color
              4 color + 2 PMS colors Type in PMS colors
              4 color + aqueous
              4 color + varnish
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Cannot use quote symbol that is---- Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information White RRD must provide this information NA NA NA NA NA NA 85 11 SIDE NA NA NA NA HALF 85 x 11 50 RRD must provide this information
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B NA PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information GLOSS TEXT 80 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA NA NA NA HALF 85 x 11 RRD must provide this information
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              EA 1 1 See DocMan for the Cost Center selections associated with each Business Group Black amp White B PERFECT PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 2 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA 516 3LEFT NA NA NA NA RRD must provide this information Cover Stock = 90 White IndexText Stock = 20 White Opaque BondCover Ink = BlackText Ink = BlackSpine = If included as last page of PDF
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions EA 1 1 Marketing Commercial Marketing Other November 2008 5 Black amp White B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 4 16 4 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 475 7 SIDE NA NA NA HALF 425 x 7 50 RRD must provide this information Text Stock = 20 White Opaque BondText Ink = Black PN-25192
              Corp 17501
              Bill To 69
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions EA 1 1 Marketing Commercial Marketing Other November 2008 5 Black amp White B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 4 16 4 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 475 7 SIDE NA NA NA HALF 425 x 7 50 RRD must provide this information Text Stock = 20 White Opaque BondText Ink = Black PN-25192
              Details of the Rockwell Automation Print Specifications sheet
              This print specifications sheet is designed with multiple purposes- It is a vehicle to get the most accurate print specifications to RA-approved print vendors- It provides authors with an explanation of all necessary fields to complete before attaching the sheet to your PDF- It provides separate tabs so that an author can fill in all fields related to the publication on the Generic tab or publication-specific template-type tabs to minimize the number of fields an author must completeTo facilitate the most efficient use of this sheet we recommend that you click on the publication-specific tab that most closely fits you publication and use that to complete the print specificationsIMPORTANT Because this sheet was constructed using a sheet that RR Donnelley (RRD) uses to load print specifications there are some columns hidden For example the first field you must complete is Column E or Publication Number Columns A to D are used for RRD purposes and with information only representatives of that RA-approved printer can completeDO NOT delete any hidden columns from the tab you choose to use
              Definitions of Each Tab in Sheet
              Generic pub print specs Single sheet with all required columns for necessary specifications None of the columns are completed All must be completed before attaching the sheet to your PDFThis tab has 39 blank fields you must complete via free text type or pull-down menus
              IN RN pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to installation instructions (IN) and release notes (RN) However you can use this sheet for other publications that are similar to INs and RNsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              UM RM PM pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to user manuals (UM) reference manuals (RM) and programming manuals (PM) However you can use this sheet for other publications that are similar to UMs RMs and PMsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              AP PP pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to application solutions (AP) and product profiles (PP) However you can use this sheet for other publications that are similar to APs and PPsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              BR pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to brochures (BR) However you can use this sheet for other publications that are similar to BRsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              Field definitions Description of information fields used throughout the spreadsheet tabs that may not be immediately obvious to a user
              Attach Print Specs to PDF
              For Acrobat 80 follow these steps1 Open the PDF2 Click on DocumentgtAttach A File A new section appears at the bottom of the PDF3 Browse to the MS Excel file with the print specs and add it to the PDFFor Acrobat 70 follow these steps1 Open the PDF2 Click on the Attachments tab next to the publications bookmarks A new section appears at the bottom of the PDF3 Click on the Add button in the bottom section of the PDF4 Browse to the MS Excel file with the print specs and add it to the PDFFor Acrobat 60 follow these steps1 Open the PDF2 Go to the backcover of the PDF3 Click on the Tools pull-down menu4 Click on this sequence of menu options - Advanced Commenting Attach Attach File Tool A paper clip appears5 Click to put the paper clip somewhere on the backcover The browse window appears6 Browse to the MS Excel file with the print specs and add it to the PDFIMPORTANT If you are using Acrobat 50 or earlier please upgrade
              RA-QR005C-EN-E 608
Page 3: USB-to-ControlNet Cable - Rockwell Automationliterature.rockwellautomation.com/idc/groups/literature/documents/... · USB-to-ControlNet Cable Catalog Number 1784-U2CN Topic Page Important

USB-to-ControlNet Cable 3

Environment and Enclosure

At the end of its life this equipment should be collected separately from any unsorted municipal waste

ATTENTION This equipment is intended for use in overvoltage Category II applications (as defined in IEC publication 60664-1) at altitudes up to 2000 m (6562 ft) without deratingThis equipment is considered Group 1 Class A industrial equipment according to IECCISPR Publication 11 Without appropriate precautions there may be potential difficulties ensuring electromagnetic compatibility in other environments due to conducted as well as radiated disturbanceThis equipment is supplied as enclosed equipment It should not require additional system enclosure when used in locations consistent with the enclosure type ratings stated in the Specifications section of this publication Subsequent sections of this publication may contain additional information regarding specific enclosure type ratings beyond what this product provides that are required to comply with certain product safety certifications

In addition to this publication see the following publications

bull publication 1770-41 Industrial Automation Wiring and Grounding Guidelines for additional installation requirements

bull NEMA Standards publication 250 and IEC publication 60529 as applicable for explanations of the degrees of protection provided by different types of enclosures

Publication 1784-IN047A-EN-P - November 2008

4 USB-to-ControlNet Cable

About the CableThe 1784-U2CN USB-to-ControlNet cable lets you connect a notebook or desktop computer to a ControlNet network by using an unused USB port on the computer The product replaces the 1784-PCC communication card for computers that do not have PCMCIA slots

IMPORTANT To comply with the CE Low Voltage Directive (LVD) this equipment must be powered from a source compliant with Safety Extra Low Voltage (SELV) or Protected Extra Low Voltage (PELV)

USB Cable

Status Indicators

RJ45 ControlNet Network Connector

Node Address Switches

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 5

Install the CableFollow these procedures to install the cable

Obtain the Device Driver for the Cable

Follow these steps to download and install the device driver for the cable

1 Visit httpwwwrockwellautomationcomknowledgebase

2 Open tech note ID 55431 and follow the instructions in the tech note to install the driver

ATTENTION This equipment is sensitive to electrostatic discharge which can cause internal damage and affect normal operation Follow these guidelines when you handle this equipmentbull Touch a grounded object to discharge potential static

bull Do not touch connectors or pins

bull Store the equipment in appropriate static-safe packaging when not in use

IMPORTANT A minimum of RSLinx Classic software version 251 is required for use with the cable

IMPORTANT If RSLinx Classic software version 254 or later is installed on the computer the device driver is already installed on the computer Skip this section

Publication 1784-IN047A-EN-P - November 2008

6 USB-to-ControlNet Cable

Configure and Connect the Cable

1 Use the rotary switches to set the module node address to a valid number (1hellip99)

2 Insert the end of the cable having the USB connector into a USB port on a computer

ATTENTION USB and ControlNet connection lengths must be less than 3 meters Do not attempt to extend the cables

Node Address (Rotary) Switches

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 7

3 Insert the end of the cable having the RJ45 network connector into the ControlNet network access port (NAP) of a ControlNet network-enabled device

Traffic Analyzer Software

The 1784-U2CN cable is designed to work with Frontlinersquos NetDecoder traffic analyzer software For more information on Frontlinersquos product go to either httpwwwrockwellautomationcomencompass or httpwwwftecom

USB Cable

RJ45 ControlNet Network Connector

Publication 1784-IN047A-EN-P - November 2008

8 USB-to-ControlNet Cable

Product Dimensions

The following illustration shows the product dimensions

USB Cable Length 061 m (2 ft)

Enclosure Length 762 cm (3 in) Width 508 cm (2 in) Thickness 254 cm (1 in)

ControlNet NAP Cable Length 305 m (10 ft)

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 9

Status IndicatorsThe following table describes the cable status indicators

Indicator Status Description

USB Green The cable is configured but no network traffic is present

Flashing green Network traffic is present

Off Unable to transfer data

bull Disconnected from host

bull In one of the following states

ndash default

ndash powered

ndash address

ndash suspend

USB

ControlNet Network Status

Module Status

Publication 1784-IN047A-EN-P - November 2008

10 USB-to-ControlNet Cable

Module Status (MS) Green The cable is operating normally

Off No power to the cable

Flashing green The cable is operating in a normal condition and is online with no connections established

bull The cable may be in Standby mode

bull The cable needs commissioning due to missing incomplete or incorrect configuration

Flashing red The cable has a recoverable fault

Red The cable has an unrecoverable fault and may need to be replaced

Flashing redgreen

The cable is performing a self-test

ControlNet Network Status (NS)

Off Not on network

Red Network interface faulted

Flashing redgreen

Invalid network configuration (for example a MAC ID above UMAX)

Flashing red bull Duplicate node detected

bull Link fault

bull No MAC frames received

Flashing green bull Temporary channel error

bull Listen only

Green Normal operation MAC frame received without error

Indicator Status Description

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 11

Specifications

USB-to-ControlNet Cable Catalog Number 1784-U2CN

Attribute Value

Enclosure type rating Meets IP30

Power dissipation max 05 W

Supply voltage 500V DC 525V DC max

Supply current 75 mA

Power consumption max 05 W

Isolation voltage 30V continuous Basic Insulation Type Type tested at 500V AC for 60 s ControlNet to USB

Wiring category(1)

(1) Use this Conductor Category information for planning conductor routing Refer to Industrial Automation Wiring and Grounding Guidelines publication 1770-41

2 - on communication ports

ControlNet current value 70 mA 24V

Publication 1784-IN047A-EN-P - November 2008

12 USB-to-ControlNet Cable

Environmental Specifications

Attribute Value

Temperature operating

IEC 60068-2-1 (Test Ad Operating Cold) IEC 60068-2-2 (Test Bd Operating Dry Heat) IEC 60068-2-14 (Test Nb Operating Thermal Shock) 0hellip55 degC (32hellip131 degF)

Temperature nonoperating

IEC 60068-2-1 (Test Ab Unpackaged Nonoperating Cold) IEC 60068-2-2 (Test Bb Unpackaged Nonoperating Dry Heat) IEC 60068-2-14 (Test Na Unpackaged Nonoperating Thermal Shock) -10hellip85 degC (14hellip185 degF)

Relative humidity IEC 60068-2-30 (Test Db Unpackaged Damp Heat) 5hellip95 noncondensing

Nonoperating shock IEC 60068-2-27 (Test Ea Unpackaged Shock) 1000 mm (328 ft)

Emissions CISPR 11 Group 1 Class A

ESD immunity IEC 61000-4-2 8 kV air discharges

Radiated RF immunity IEC 61000-4-3 10Vm with 1 kHz sine-wave 80 AM from 80hellip2000 MHz 10Vm with 200 Hz 50 Pulse 100 AM at 900 MHz 10Vm with 200 Hz 50 Pulse 100 AM at 1890 MHz 10Vm with 1 kHz sine-wave 80 AM from 2000hellip2700 MHz

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 13

Certifications

Certifications (when product is marked)(1)

Value

c-UL-us UL Listed Industrial Control Equipment certified for US and Canada See UL File E65584

CE European Union 2004108EC EMC Directive compliant with EN 61326-1 MeasControlLab Industrial Requirements EN 61000-6-2 Industrial Immunity EN 61000-6-4 Industrial Emissions EN 61131-2 Programmable Controllers (Clause 8 Zone A amp B)

C-Tick Australian Radiocommunications Act compliant with ASNZS CISPR 11 Industrial Emissions

CI ControlNet International conformance tested to ControlNet specifications

(1) See the Product Certification link at httpwwwabcom for Declarations of Conformity Certificates and other certification details

Publication 1784-IN047A-EN-P - November 2008

14 USB-to-ControlNet Cable

Additional ResourcesThese documents contain additional information concerning related Rockwell Automation products

Resource Description

ControlNet Coax Media Planning and Installation Guide publication CNET-IN002

Provides ControlNet network planning information

Industrial Automation Wiring and Grounding Guidelines publication 1770-41

Provides general guidelines for installing a Rockwell Automation industrial system

Product Certifications website httpwwwabcom

Provides declarations of conformity certificates and other certification details

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 15

Notes

Publication 1784-IN047A-EN-P - November 2008

Rockwell Automation SupportRockwell Automation provides technical information on the Web to assist you in using its products At httpsupportrockwellautomationcom you can find technical manuals a knowledge base of FAQs technical and application notes sample code and links to software service packs and a MySupport feature that you can customize to make the best use of these tools

For an additional level of technical phone support for installation configuration and troubleshooting we offer TechConnect support programs For more information contact your local distributor or Rockwell Automation representative or visit httpsupportrockwellautomationcom

Installation Assistance

If you experience a problem within the first 24 hours of installation please review the information thats contained in this manual You can also contact a special Customer Support number for initial help in getting your product up and running

New Product Satisfaction Return

Rockwell Automation tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility However if your product is not functioning and needs to be returned follow these procedures

Allen-Bradley Data Highway Plus DH+ PLC-5 RSLinx Rockwell Automation SLC and TechConnect are trademarks of Rockwell Automation Inc

Trademarks not belonging to Rockwell Automation are property of their respective companies

United States 14406463434 Monday ndash Friday 8 am ndash 5 pm EST

Outside United States Please contact your local Rockwell Automation representative for any technical support issues

United States Contact your distributor You must provide a Customer Support case number (see phone number above to obtain one) to your distributor in order to complete the return process

Outside United States Please contact your local Rockwell Automation representative for the return procedure

Publication 1784-IN047A-EN-P - November 2008 PN-25192Copyright copy 2008 Rockwell Automation Inc All rights reserved Printed in the USA

  • Publication 1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions
    • Important User Information
    • Environment and Enclosure
    • About the Cable
    • Install the Cable
      • Obtain the Device Driver for the Cable
      • Configure and Connect the Cable
      • Traffic Analyzer Software
      • Product Dimensions
        • Status Indicators
        • Specifications
        • Additional Resources
        • Back Cover

            • ltlt ASCII85EncodePages false AllowTransparency false AutoPositionEPSFiles false AutoRotatePages None Binding Left CalGrayProfile (Gray Gamma 22) CalRGBProfile (sRGB IEC61966-21) CalCMYKProfile (Euroscale Uncoated v2) sRGBProfile (sRGB IEC61966-21) CannotEmbedFontPolicy Error CompatibilityLevel 14 CompressObjects Tags CompressPages true ConvertImagesToIndexed true PassThroughJPEGImages true CreateJDFFile false CreateJobTicket true DefaultRenderingIntent Default DetectBlends true DetectCurves 00000 ColorConversionStrategy LeaveColorUnchanged DoThumbnails false EmbedAllFonts true EmbedOpenType false ParseICCProfilesInComments true EmbedJobOptions true DSCReportingLevel 0 EmitDSCWarnings false EndPage -1 ImageMemory 1048576 LockDistillerParams true MaxSubsetPct 99 Optimize true OPM 1 ParseDSCComments false ParseDSCCommentsForDocInfo false PreserveCopyPage true PreserveDICMYKValues true PreserveEPSInfo false PreserveFlatness true PreserveHalftoneInfo true PreserveOPIComments false PreserveOverprintSettings true StartPage 1 SubsetFonts false TransferFunctionInfo Apply UCRandBGInfo Preserve UsePrologue false ColorSettingsFile (None) AlwaysEmbed [ true ArialMT ] NeverEmbed [ true ] AntiAliasColorImages false CropColorImages true ColorImageMinResolution 150 ColorImageMinResolutionPolicy OK DownsampleColorImages true ColorImageDownsampleType Bicubic ColorImageResolution 150 ColorImageDepth 8 ColorImageMinDownsampleDepth 1 ColorImageDownsampleThreshold 100000 EncodeColorImages true ColorImageFilter FlateEncode AutoFilterColorImages false ColorImageAutoFilterStrategy JPEG ColorACSImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt ColorImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt JPEG2000ColorACSImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt JPEG2000ColorImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt AntiAliasGrayImages false CropGrayImages true GrayImageMinResolution 150 GrayImageMinResolutionPolicy OK DownsampleGrayImages true GrayImageDownsampleType Bicubic GrayImageResolution 150 GrayImageDepth 8 GrayImageMinDownsampleDepth 2 GrayImageDownsampleThreshold 100000 EncodeGrayImages true GrayImageFilter FlateEncode AutoFilterGrayImages false GrayImageAutoFilterStrategy JPEG GrayACSImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt GrayImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt JPEG2000GrayACSImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt JPEG2000GrayImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt AntiAliasMonoImages false CropMonoImages true MonoImageMinResolution 900 MonoImageMinResolutionPolicy OK DownsampleMonoImages true MonoImageDownsampleType Bicubic MonoImageResolution 900 MonoImageDepth -1 MonoImageDownsampleThreshold 100000 EncodeMonoImages true MonoImageFilter CCITTFaxEncode MonoImageDict ltlt K -1 gtgt AllowPSXObjects true CheckCompliance [ None ] PDFX1aCheck false PDFX3Check false PDFXCompliantPDFOnly false PDFXNoTrimBoxError true PDFXTrimBoxToMediaBoxOffset [ 000000 000000 000000 000000 ] PDFXSetBleedBoxToMediaBox true PDFXBleedBoxToTrimBoxOffset [ 000000 000000 000000 000000 ] PDFXOutputIntentProfile (None) PDFXOutputConditionIdentifier () PDFXOutputCondition () PDFXRegistryName (httpwwwcolororg) PDFXTrapped False SyntheticBoldness 1000000 Description ltlt JPN ltFEFF3053306e8a2d5b9a306f300130d330b830cd30b9658766f8306e8868793a304a3088307353705237306b90693057305f00200050004400460020658766f830924f5c62103059308b3068304d306b4f7f75283057307e305930023053306e8a2d5b9a30674f5c62103057305f00200050004400460020658766f8306f0020004100630072006f0062006100740020304a30883073002000520065006100640065007200200035002e003000204ee5964d30678868793a3067304d307e30593002gt DEU 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 FRA 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 PTB 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 DAN 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 NLD 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 ESP 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 SUO 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 ITA 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 NOR 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 SVE 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 ENU (Rockwell Job Options for Web-only PDF Files) gtgtgtgt setdistillerparamsltlt HWResolution [2540 2540] PageSize [792000 1224000]gtgt setpagedevice

              Intro

              ampLRA-QR005B-EN-E 308

              Generic pub print specs

              ampCItem Setup Sheet for Conversion Transfers
              ampLJIT-D-print SpreadsheetampCRA-QR005C-EN-EampRampD ampT

              IN RN pub type specs

              UM RM PM pub type specs

              AP PP pub type specs

              BR pub type specs

              Field definitions

              ampL04032006ampRampP
              PackagingOrdering Unit Of Measure
              EA = Each
              PK = Pack
              PD = Pad
              RL = Roll
              BK = Book
              CT = Carton
              BX = Box
              ST = Set
              Multiple Order Qty
              Separate methods of ordering same item For example if an item is packaged 50 per pad 5 pads per carton You can set the order qty as 50 each (one pad) or 250 each (1 ctn)
              Business Group
              The business group that the publication supports Your choice here determines the list you choose from for Cost Center
              CorporateBusiness Development
              Finance
              Human Resources
              IT
              Logistics
              Manufacturing
              Marketing Commercial
              Marketing Europe
              Marketing Other
              Operations
              Order Services
              Other
              Process Improvement
              Procurement
              Quality
              Sales
              Max Order Quantity
              Presale items = 100
              Postsale items = 5
              NOTE You can use other quantities but the delivery may take a bit longer because a system admin must approve it
              Item Category - Form (F) or Book (B)
              Form (F) = Any publication that is a single sheet (ie 1 or 2 pages) an envelope or carbonless form
              Book (B) = Any publication that contains 3 or more pages
              BindingStitching
              For a Form (F) use
              CARBONLESS
              CUTSHEET
              ENVELOPE
              For a Book (B) use
              LOOSE LOOSE -Loose Leaf
              PERFECT PERFECT - Perfect Bound
              PLASTCOIL PLASTCOIL - Plastic Coil (Coil Bound)
              SADDLE SADDLE - Saddle Stitch
              STAPLED1 STAPLED1 -1 position
              STAPLED1B STAPLED1B - bottom 1 position
              STAPLED2 STAPLED2 - 2 positions
              THERMAL THERMAL - Thermal bound (Tape bound)
              THERMALO THERMALO - Thermal Bound (Tape bound - offline)
              WIRE O Wire O - Double Wire Bound (offline)
              Saddle-Stitch Items
              20 sheets max on 20 (text and cover)
              19 sheets max on 20 (text) and 24 (cover)
              18 sheets max on 24 (text and cover)
              All page quantities must be divisible by 4
              Tape Bound Items
              125 sheets max on 20 no cover
              120 sheets max wcover (90 index unless indicated otherwise)
              Perfect Bound Items
              475 sheets max on 20 no cover
              470 sheets max wcover (90 index unless indicated otherwise)
              Double Wire Bound Items
              40 sheets max on 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
              Coil Bound Items
              290 sheets max of 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
              Sides Printed
              Head2Head = Most common Double-sided printing with headers on both pages lining up at the top of the page
              Simplex = Single-sided printing
              Head2Toe = Least common Double-sided printing with header on one page lining up with the footer on the other page
              Number of Forms to a Sheet
              Number of publication pages printed on a sheet of paper at the printerFor example if a 4-page 85 x 11 publication is printed on the front and back sides of an 11 x 17 sheet of paper that is folded in half the Number of Forms to a Sheet = 4Example 2 If a 4-page 55 x 85 publication is printed on the front and back sides of an 85 x 11 sheet of paper that is folded in half the Number of forms to a Sheet = 4
              Number of Sheets Required to Print
              Number of sheets of paper required to print the publicationFor example if a 16-page 85 x 11 publication is printed on the front and back sides of four 11 x 17 sheets of paper that are folded in half and saddle stitched together the Number of Sheets Required to Print = 4Example 4 If a 4-page 55 x 85 publication is printed on the front and back sides of one 85 x 11 sheet of paper that is folded in half the Number of Sheets Required to Print = 1
              Paper Stock Type
              Description
              PLAIN Bond
              ACNTCVR Accent Cover
              BOND3H Bond (3-hole)
              BOOKENV Booklet Envelope
              C1SGLOSS C1S Gloss Finish
              C1SMATTE C1S Matt Finish
              C2SGLOSS C2S Gloss Finish
              C2SMATTE C2S Matt Finish
              CARD Card Stock
              CATLGENV Catalog Envelope
              CATLGENV6 6 Catalog Envelope
              COVERCOLOR Color Cover Copy
              CRCKPEEL Crack N Peel Label
              CUSTOM Custom
              CVRFUTURA Futura Cover
              ENV6x9 Standard 6X9 Envelope
              ENV9X12 Standard 9X12 Envelope
              ETHCERT Ethicon Certificate
              GLOSSCOVER Gloss Cover
              GLOSSTEXT Gloss Text
              HOTSTEXT Hots Text
              INDEX Index
              LABEL80 80 Up Label
              MICROPRT Micro Print
              OFFSET Offset
              PART2 2 Part
              PART3 3 Part
              PART4 4 Part
              PART5 5 Part
              PART6 6 Part
              PERF 12 inch Perfed
              PERMMAT Perm Mat Ad
              PRECUTTAB Pre-Cut Tab
              PREPERF Pre-Perforated
              RECYL Recycled
              SE10ENV 10 Standard Envelope
              SE10ITENV 10 Inside Tint Envelope
              SE9ENV 9 Stanard Envelope
              TAG Tag
              TEXT Text
              TEXTCOLOR Text Color Copy
              TEXTFUTURA Futura Text
              TEXTLASER Text Laser Print
              TRANSPRNCY Transparencies
              VELLUM Vellum
              VELLUM3HP Vellum 3HP
              WE10ENV 10 Window Envelope
              WE9ENV 9 Windor Envelope
              WE9ITENV 9 Inside Tint Window Envelope
              Paper Stock Color
              Black
              Blue
              Buff
              Canary
              Cherry
              Clear
              Cream
              Custom
              Goldrenrod
              Gray
              Green
              Ivory
              Lavender
              Manilla
              NCRPinkCanary
              NCRWhiteBlue
              NCRWhiteBlueCanary
              NCRWhiteCanary
              NCRWhiteCanaryPink
              NCRWhiteCanaryPinkGoldenrod
              NCRWhiteGreen
              NCRWhiteGoldenrodYellow
              NCRWhitePink
              NCRWhiteWhite
              Opaque
              Orange
              Orchid
              Peach
              Pink
              Purple
              Salmon
              Tan
              Violet
              White
              Finished Trim Sizes (listed - width x length)
              11 x 17
              18 x 24 Poster
              24 x 36 Poster
              3 x 5
              36 x 24 Poster
              4 x 6
              475 x 7
              475 x 775
              55 x 85
              6 x 4
              7 x 9
              7385 x 9 (RSI Std)
              85 x 11
              825 x 10875
              825 x 11 (RA product profile std)
              8375 x 10875
              9 x 12
              A4
              A5
              Other - Custom size listed below
              Drilling Locations
              1CENTER
              1LEFTTOP
              1TOPCENTER
              2LEFT
              2LEFT2TOP
              2TOP
              2TOP2LEFT
              2TOP3LEFT
              2TOP5LEFT
              2TOP5RIGHT
              3BOTTOM
              3LEFT
              3LEFT2TOP
              3LEFT3TOP
              3RIGHT
              3TOP
              3TOP5LEFT
              5BOTTOM
              5CENTER
              5LEFT
              5RIGHT
              5RIGHT2TOP
              5TOP
              For TRI fold - select Z or C type Description
              HALF Half
              C C Fold
              DBLEPARLL Double Parallel
              OFFSETZ Offset Z
              SAMPLE See Sample
              SHORT Short Fold
              V V Fold
              Z Z Fold
              Number of Pieces per Poly Wrap
              Publication length Number per Poly Wrap
              77 or more pages 1
              33 to 76 pages 25
              3 to 32 pages 50
              1 or 2 pages 100
              Comments
              CoverText Stock Spine
              100 Gloss Cover If your publication uses a spine make note of that in the comments field Be sure to include the spine as the last page of your PDF Do NOT include that page as part of the publication page count Because the addition of a spine will create an odd page count in the PDF contact a Super User to submit your publication via PDFdirect with an exception tool
              100 Gloss Text
              100 Text
              10pt C1S Cover
              10pt C2S Cover
              10pt C2S Text
              10pt Text Stock
              110 White Index
              12pt C1S Cover
              20 White Opaque Bond
              50 Colored Offset
              50 White Offset
              50 White Opaque
              60 Cover Stock
              60 White Offset
              80 Gloss Cover
              80 Gloss Text
              8pt C1S White
              90 White Index
              CoverText Ink
              Black
              Black + 1 PMS color Type in PMS color
              Black + 2 PMS colors Type in PMS colors
              4 color
              4 color over black
              4 color + 1 PMS color Type in PMS color
              4 color over black + 1 PMS color Type in PMS color
              4 color + 2 PMS colors Type in PMS colors
              4 color + aqueous
              4 color + varnish
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Cannot use quote symbol that is---- Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information White RRD must provide this information NA NA NA NA NA NA 85 11 SIDE NA NA NA NA HALF 85 x 11 50 RRD must provide this information
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B NA PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information GLOSS TEXT 80 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA NA NA NA HALF 85 x 11 RRD must provide this information
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              EA 1 1 See DocMan for the Cost Center selections associated with each Business Group Black amp White B PERFECT PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 2 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA 516 3LEFT NA NA NA NA RRD must provide this information Cover Stock = 90 White IndexText Stock = 20 White Opaque BondCover Ink = BlackText Ink = BlackSpine = If included as last page of PDF
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions EA 1 1 Marketing Commercial Marketing Other November 2008 5 Black amp White B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 4 16 4 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 475 7 SIDE NA NA NA HALF 425 x 7 50 RRD must provide this information Text Stock = 20 White Opaque BondText Ink = Black PN-25192
              Corp 17501
              Bill To 69
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions EA 1 1 Marketing Commercial Marketing Other November 2008 5 Black amp White B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 4 16 4 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 475 7 SIDE NA NA NA HALF 425 x 7 50 RRD must provide this information Text Stock = 20 White Opaque BondText Ink = Black PN-25192
              Details of the Rockwell Automation Print Specifications sheet
              This print specifications sheet is designed with multiple purposes- It is a vehicle to get the most accurate print specifications to RA-approved print vendors- It provides authors with an explanation of all necessary fields to complete before attaching the sheet to your PDF- It provides separate tabs so that an author can fill in all fields related to the publication on the Generic tab or publication-specific template-type tabs to minimize the number of fields an author must completeTo facilitate the most efficient use of this sheet we recommend that you click on the publication-specific tab that most closely fits you publication and use that to complete the print specificationsIMPORTANT Because this sheet was constructed using a sheet that RR Donnelley (RRD) uses to load print specifications there are some columns hidden For example the first field you must complete is Column E or Publication Number Columns A to D are used for RRD purposes and with information only representatives of that RA-approved printer can completeDO NOT delete any hidden columns from the tab you choose to use
              Definitions of Each Tab in Sheet
              Generic pub print specs Single sheet with all required columns for necessary specifications None of the columns are completed All must be completed before attaching the sheet to your PDFThis tab has 39 blank fields you must complete via free text type or pull-down menus
              IN RN pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to installation instructions (IN) and release notes (RN) However you can use this sheet for other publications that are similar to INs and RNsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              UM RM PM pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to user manuals (UM) reference manuals (RM) and programming manuals (PM) However you can use this sheet for other publications that are similar to UMs RMs and PMsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              AP PP pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to application solutions (AP) and product profiles (PP) However you can use this sheet for other publications that are similar to APs and PPsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              BR pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to brochures (BR) However you can use this sheet for other publications that are similar to BRsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              Field definitions Description of information fields used throughout the spreadsheet tabs that may not be immediately obvious to a user
              Attach Print Specs to PDF
              For Acrobat 80 follow these steps1 Open the PDF2 Click on DocumentgtAttach A File A new section appears at the bottom of the PDF3 Browse to the MS Excel file with the print specs and add it to the PDFFor Acrobat 70 follow these steps1 Open the PDF2 Click on the Attachments tab next to the publications bookmarks A new section appears at the bottom of the PDF3 Click on the Add button in the bottom section of the PDF4 Browse to the MS Excel file with the print specs and add it to the PDFFor Acrobat 60 follow these steps1 Open the PDF2 Go to the backcover of the PDF3 Click on the Tools pull-down menu4 Click on this sequence of menu options - Advanced Commenting Attach Attach File Tool A paper clip appears5 Click to put the paper clip somewhere on the backcover The browse window appears6 Browse to the MS Excel file with the print specs and add it to the PDFIMPORTANT If you are using Acrobat 50 or earlier please upgrade
              RA-QR005C-EN-E 608
Page 4: USB-to-ControlNet Cable - Rockwell Automationliterature.rockwellautomation.com/idc/groups/literature/documents/... · USB-to-ControlNet Cable Catalog Number 1784-U2CN Topic Page Important

4 USB-to-ControlNet Cable

About the CableThe 1784-U2CN USB-to-ControlNet cable lets you connect a notebook or desktop computer to a ControlNet network by using an unused USB port on the computer The product replaces the 1784-PCC communication card for computers that do not have PCMCIA slots

IMPORTANT To comply with the CE Low Voltage Directive (LVD) this equipment must be powered from a source compliant with Safety Extra Low Voltage (SELV) or Protected Extra Low Voltage (PELV)

USB Cable

Status Indicators

RJ45 ControlNet Network Connector

Node Address Switches

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 5

Install the CableFollow these procedures to install the cable

Obtain the Device Driver for the Cable

Follow these steps to download and install the device driver for the cable

1 Visit httpwwwrockwellautomationcomknowledgebase

2 Open tech note ID 55431 and follow the instructions in the tech note to install the driver

ATTENTION This equipment is sensitive to electrostatic discharge which can cause internal damage and affect normal operation Follow these guidelines when you handle this equipmentbull Touch a grounded object to discharge potential static

bull Do not touch connectors or pins

bull Store the equipment in appropriate static-safe packaging when not in use

IMPORTANT A minimum of RSLinx Classic software version 251 is required for use with the cable

IMPORTANT If RSLinx Classic software version 254 or later is installed on the computer the device driver is already installed on the computer Skip this section

Publication 1784-IN047A-EN-P - November 2008

6 USB-to-ControlNet Cable

Configure and Connect the Cable

1 Use the rotary switches to set the module node address to a valid number (1hellip99)

2 Insert the end of the cable having the USB connector into a USB port on a computer

ATTENTION USB and ControlNet connection lengths must be less than 3 meters Do not attempt to extend the cables

Node Address (Rotary) Switches

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 7

3 Insert the end of the cable having the RJ45 network connector into the ControlNet network access port (NAP) of a ControlNet network-enabled device

Traffic Analyzer Software

The 1784-U2CN cable is designed to work with Frontlinersquos NetDecoder traffic analyzer software For more information on Frontlinersquos product go to either httpwwwrockwellautomationcomencompass or httpwwwftecom

USB Cable

RJ45 ControlNet Network Connector

Publication 1784-IN047A-EN-P - November 2008

8 USB-to-ControlNet Cable

Product Dimensions

The following illustration shows the product dimensions

USB Cable Length 061 m (2 ft)

Enclosure Length 762 cm (3 in) Width 508 cm (2 in) Thickness 254 cm (1 in)

ControlNet NAP Cable Length 305 m (10 ft)

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 9

Status IndicatorsThe following table describes the cable status indicators

Indicator Status Description

USB Green The cable is configured but no network traffic is present

Flashing green Network traffic is present

Off Unable to transfer data

bull Disconnected from host

bull In one of the following states

ndash default

ndash powered

ndash address

ndash suspend

USB

ControlNet Network Status

Module Status

Publication 1784-IN047A-EN-P - November 2008

10 USB-to-ControlNet Cable

Module Status (MS) Green The cable is operating normally

Off No power to the cable

Flashing green The cable is operating in a normal condition and is online with no connections established

bull The cable may be in Standby mode

bull The cable needs commissioning due to missing incomplete or incorrect configuration

Flashing red The cable has a recoverable fault

Red The cable has an unrecoverable fault and may need to be replaced

Flashing redgreen

The cable is performing a self-test

ControlNet Network Status (NS)

Off Not on network

Red Network interface faulted

Flashing redgreen

Invalid network configuration (for example a MAC ID above UMAX)

Flashing red bull Duplicate node detected

bull Link fault

bull No MAC frames received

Flashing green bull Temporary channel error

bull Listen only

Green Normal operation MAC frame received without error

Indicator Status Description

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 11

Specifications

USB-to-ControlNet Cable Catalog Number 1784-U2CN

Attribute Value

Enclosure type rating Meets IP30

Power dissipation max 05 W

Supply voltage 500V DC 525V DC max

Supply current 75 mA

Power consumption max 05 W

Isolation voltage 30V continuous Basic Insulation Type Type tested at 500V AC for 60 s ControlNet to USB

Wiring category(1)

(1) Use this Conductor Category information for planning conductor routing Refer to Industrial Automation Wiring and Grounding Guidelines publication 1770-41

2 - on communication ports

ControlNet current value 70 mA 24V

Publication 1784-IN047A-EN-P - November 2008

12 USB-to-ControlNet Cable

Environmental Specifications

Attribute Value

Temperature operating

IEC 60068-2-1 (Test Ad Operating Cold) IEC 60068-2-2 (Test Bd Operating Dry Heat) IEC 60068-2-14 (Test Nb Operating Thermal Shock) 0hellip55 degC (32hellip131 degF)

Temperature nonoperating

IEC 60068-2-1 (Test Ab Unpackaged Nonoperating Cold) IEC 60068-2-2 (Test Bb Unpackaged Nonoperating Dry Heat) IEC 60068-2-14 (Test Na Unpackaged Nonoperating Thermal Shock) -10hellip85 degC (14hellip185 degF)

Relative humidity IEC 60068-2-30 (Test Db Unpackaged Damp Heat) 5hellip95 noncondensing

Nonoperating shock IEC 60068-2-27 (Test Ea Unpackaged Shock) 1000 mm (328 ft)

Emissions CISPR 11 Group 1 Class A

ESD immunity IEC 61000-4-2 8 kV air discharges

Radiated RF immunity IEC 61000-4-3 10Vm with 1 kHz sine-wave 80 AM from 80hellip2000 MHz 10Vm with 200 Hz 50 Pulse 100 AM at 900 MHz 10Vm with 200 Hz 50 Pulse 100 AM at 1890 MHz 10Vm with 1 kHz sine-wave 80 AM from 2000hellip2700 MHz

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 13

Certifications

Certifications (when product is marked)(1)

Value

c-UL-us UL Listed Industrial Control Equipment certified for US and Canada See UL File E65584

CE European Union 2004108EC EMC Directive compliant with EN 61326-1 MeasControlLab Industrial Requirements EN 61000-6-2 Industrial Immunity EN 61000-6-4 Industrial Emissions EN 61131-2 Programmable Controllers (Clause 8 Zone A amp B)

C-Tick Australian Radiocommunications Act compliant with ASNZS CISPR 11 Industrial Emissions

CI ControlNet International conformance tested to ControlNet specifications

(1) See the Product Certification link at httpwwwabcom for Declarations of Conformity Certificates and other certification details

Publication 1784-IN047A-EN-P - November 2008

14 USB-to-ControlNet Cable

Additional ResourcesThese documents contain additional information concerning related Rockwell Automation products

Resource Description

ControlNet Coax Media Planning and Installation Guide publication CNET-IN002

Provides ControlNet network planning information

Industrial Automation Wiring and Grounding Guidelines publication 1770-41

Provides general guidelines for installing a Rockwell Automation industrial system

Product Certifications website httpwwwabcom

Provides declarations of conformity certificates and other certification details

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 15

Notes

Publication 1784-IN047A-EN-P - November 2008

Rockwell Automation SupportRockwell Automation provides technical information on the Web to assist you in using its products At httpsupportrockwellautomationcom you can find technical manuals a knowledge base of FAQs technical and application notes sample code and links to software service packs and a MySupport feature that you can customize to make the best use of these tools

For an additional level of technical phone support for installation configuration and troubleshooting we offer TechConnect support programs For more information contact your local distributor or Rockwell Automation representative or visit httpsupportrockwellautomationcom

Installation Assistance

If you experience a problem within the first 24 hours of installation please review the information thats contained in this manual You can also contact a special Customer Support number for initial help in getting your product up and running

New Product Satisfaction Return

Rockwell Automation tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility However if your product is not functioning and needs to be returned follow these procedures

Allen-Bradley Data Highway Plus DH+ PLC-5 RSLinx Rockwell Automation SLC and TechConnect are trademarks of Rockwell Automation Inc

Trademarks not belonging to Rockwell Automation are property of their respective companies

United States 14406463434 Monday ndash Friday 8 am ndash 5 pm EST

Outside United States Please contact your local Rockwell Automation representative for any technical support issues

United States Contact your distributor You must provide a Customer Support case number (see phone number above to obtain one) to your distributor in order to complete the return process

Outside United States Please contact your local Rockwell Automation representative for the return procedure

Publication 1784-IN047A-EN-P - November 2008 PN-25192Copyright copy 2008 Rockwell Automation Inc All rights reserved Printed in the USA

  • Publication 1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions
    • Important User Information
    • Environment and Enclosure
    • About the Cable
    • Install the Cable
      • Obtain the Device Driver for the Cable
      • Configure and Connect the Cable
      • Traffic Analyzer Software
      • Product Dimensions
        • Status Indicators
        • Specifications
        • Additional Resources
        • Back Cover

            • ltlt ASCII85EncodePages false AllowTransparency false AutoPositionEPSFiles false AutoRotatePages None Binding Left CalGrayProfile (Gray Gamma 22) CalRGBProfile (sRGB IEC61966-21) CalCMYKProfile (Euroscale Uncoated v2) sRGBProfile (sRGB IEC61966-21) CannotEmbedFontPolicy Error CompatibilityLevel 14 CompressObjects Tags CompressPages true ConvertImagesToIndexed true PassThroughJPEGImages true CreateJDFFile false CreateJobTicket true DefaultRenderingIntent Default DetectBlends true DetectCurves 00000 ColorConversionStrategy LeaveColorUnchanged DoThumbnails false EmbedAllFonts true EmbedOpenType false ParseICCProfilesInComments true EmbedJobOptions true DSCReportingLevel 0 EmitDSCWarnings false EndPage -1 ImageMemory 1048576 LockDistillerParams true MaxSubsetPct 99 Optimize true OPM 1 ParseDSCComments false ParseDSCCommentsForDocInfo false PreserveCopyPage true PreserveDICMYKValues true PreserveEPSInfo false PreserveFlatness true PreserveHalftoneInfo true PreserveOPIComments false PreserveOverprintSettings true StartPage 1 SubsetFonts false TransferFunctionInfo Apply UCRandBGInfo Preserve UsePrologue false ColorSettingsFile (None) AlwaysEmbed [ true ArialMT ] NeverEmbed [ true ] AntiAliasColorImages false CropColorImages true ColorImageMinResolution 150 ColorImageMinResolutionPolicy OK DownsampleColorImages true ColorImageDownsampleType Bicubic ColorImageResolution 150 ColorImageDepth 8 ColorImageMinDownsampleDepth 1 ColorImageDownsampleThreshold 100000 EncodeColorImages true ColorImageFilter FlateEncode AutoFilterColorImages false ColorImageAutoFilterStrategy JPEG ColorACSImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt ColorImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt JPEG2000ColorACSImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt JPEG2000ColorImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt AntiAliasGrayImages false CropGrayImages true GrayImageMinResolution 150 GrayImageMinResolutionPolicy OK DownsampleGrayImages true GrayImageDownsampleType Bicubic GrayImageResolution 150 GrayImageDepth 8 GrayImageMinDownsampleDepth 2 GrayImageDownsampleThreshold 100000 EncodeGrayImages true GrayImageFilter FlateEncode AutoFilterGrayImages false GrayImageAutoFilterStrategy JPEG GrayACSImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt GrayImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt JPEG2000GrayACSImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt JPEG2000GrayImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt AntiAliasMonoImages false CropMonoImages true MonoImageMinResolution 900 MonoImageMinResolutionPolicy OK DownsampleMonoImages true MonoImageDownsampleType Bicubic MonoImageResolution 900 MonoImageDepth -1 MonoImageDownsampleThreshold 100000 EncodeMonoImages true MonoImageFilter CCITTFaxEncode MonoImageDict ltlt K -1 gtgt AllowPSXObjects true CheckCompliance [ None ] PDFX1aCheck false PDFX3Check false PDFXCompliantPDFOnly false PDFXNoTrimBoxError true PDFXTrimBoxToMediaBoxOffset [ 000000 000000 000000 000000 ] PDFXSetBleedBoxToMediaBox true PDFXBleedBoxToTrimBoxOffset [ 000000 000000 000000 000000 ] PDFXOutputIntentProfile (None) PDFXOutputConditionIdentifier () PDFXOutputCondition () PDFXRegistryName (httpwwwcolororg) PDFXTrapped False SyntheticBoldness 1000000 Description ltlt JPN ltFEFF3053306e8a2d5b9a306f300130d330b830cd30b9658766f8306e8868793a304a3088307353705237306b90693057305f00200050004400460020658766f830924f5c62103059308b3068304d306b4f7f75283057307e305930023053306e8a2d5b9a30674f5c62103057305f00200050004400460020658766f8306f0020004100630072006f0062006100740020304a30883073002000520065006100640065007200200035002e003000204ee5964d30678868793a3067304d307e30593002gt DEU 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 FRA ltFEFF004f007000740069006f006e00730020007000650072006d0065007400740061006e007400200064006500200063007200e900650072002000640065007300200064006f00630075006d0065006e007400730020005000440046002000700072006f00660065007300730069006f006e006e0065006c007300200066006900610062006c0065007300200070006f007500720020006c0061002000760069007300750061006c00690073006100740069006f006e0020006500740020006c00270069006d007000720065007300730069006f006e002e00200049006c002000650073007400200070006f0073007300690062006c0065002000640027006f00750076007200690072002000630065007300200064006f00630075006d0065006e007400730020005000440046002000640061006e00730020004100630072006f0062006100740020006500740020005200650061006400650072002c002000760065007200730069006f006e002000200035002e00300020006f007500200075006c007400e9007200690065007500720065002egt PTB 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 DAN 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 NLD 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 ESP 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 SUO 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 ITA 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 NOR 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 SVE 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 ENU (Rockwell Job Options for Web-only PDF Files) gtgtgtgt setdistillerparamsltlt HWResolution [2540 2540] PageSize [792000 1224000]gtgt setpagedevice

              Intro

              ampLRA-QR005B-EN-E 308

              Generic pub print specs

              ampCItem Setup Sheet for Conversion Transfers
              ampLJIT-D-print SpreadsheetampCRA-QR005C-EN-EampRampD ampT

              IN RN pub type specs

              UM RM PM pub type specs

              AP PP pub type specs

              BR pub type specs

              Field definitions

              ampL04032006ampRampP
              PackagingOrdering Unit Of Measure
              EA = Each
              PK = Pack
              PD = Pad
              RL = Roll
              BK = Book
              CT = Carton
              BX = Box
              ST = Set
              Multiple Order Qty
              Separate methods of ordering same item For example if an item is packaged 50 per pad 5 pads per carton You can set the order qty as 50 each (one pad) or 250 each (1 ctn)
              Business Group
              The business group that the publication supports Your choice here determines the list you choose from for Cost Center
              CorporateBusiness Development
              Finance
              Human Resources
              IT
              Logistics
              Manufacturing
              Marketing Commercial
              Marketing Europe
              Marketing Other
              Operations
              Order Services
              Other
              Process Improvement
              Procurement
              Quality
              Sales
              Max Order Quantity
              Presale items = 100
              Postsale items = 5
              NOTE You can use other quantities but the delivery may take a bit longer because a system admin must approve it
              Item Category - Form (F) or Book (B)
              Form (F) = Any publication that is a single sheet (ie 1 or 2 pages) an envelope or carbonless form
              Book (B) = Any publication that contains 3 or more pages
              BindingStitching
              For a Form (F) use
              CARBONLESS
              CUTSHEET
              ENVELOPE
              For a Book (B) use
              LOOSE LOOSE -Loose Leaf
              PERFECT PERFECT - Perfect Bound
              PLASTCOIL PLASTCOIL - Plastic Coil (Coil Bound)
              SADDLE SADDLE - Saddle Stitch
              STAPLED1 STAPLED1 -1 position
              STAPLED1B STAPLED1B - bottom 1 position
              STAPLED2 STAPLED2 - 2 positions
              THERMAL THERMAL - Thermal bound (Tape bound)
              THERMALO THERMALO - Thermal Bound (Tape bound - offline)
              WIRE O Wire O - Double Wire Bound (offline)
              Saddle-Stitch Items
              20 sheets max on 20 (text and cover)
              19 sheets max on 20 (text) and 24 (cover)
              18 sheets max on 24 (text and cover)
              All page quantities must be divisible by 4
              Tape Bound Items
              125 sheets max on 20 no cover
              120 sheets max wcover (90 index unless indicated otherwise)
              Perfect Bound Items
              475 sheets max on 20 no cover
              470 sheets max wcover (90 index unless indicated otherwise)
              Double Wire Bound Items
              40 sheets max on 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
              Coil Bound Items
              290 sheets max of 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
              Sides Printed
              Head2Head = Most common Double-sided printing with headers on both pages lining up at the top of the page
              Simplex = Single-sided printing
              Head2Toe = Least common Double-sided printing with header on one page lining up with the footer on the other page
              Number of Forms to a Sheet
              Number of publication pages printed on a sheet of paper at the printerFor example if a 4-page 85 x 11 publication is printed on the front and back sides of an 11 x 17 sheet of paper that is folded in half the Number of Forms to a Sheet = 4Example 2 If a 4-page 55 x 85 publication is printed on the front and back sides of an 85 x 11 sheet of paper that is folded in half the Number of forms to a Sheet = 4
              Number of Sheets Required to Print
              Number of sheets of paper required to print the publicationFor example if a 16-page 85 x 11 publication is printed on the front and back sides of four 11 x 17 sheets of paper that are folded in half and saddle stitched together the Number of Sheets Required to Print = 4Example 4 If a 4-page 55 x 85 publication is printed on the front and back sides of one 85 x 11 sheet of paper that is folded in half the Number of Sheets Required to Print = 1
              Paper Stock Type
              Description
              PLAIN Bond
              ACNTCVR Accent Cover
              BOND3H Bond (3-hole)
              BOOKENV Booklet Envelope
              C1SGLOSS C1S Gloss Finish
              C1SMATTE C1S Matt Finish
              C2SGLOSS C2S Gloss Finish
              C2SMATTE C2S Matt Finish
              CARD Card Stock
              CATLGENV Catalog Envelope
              CATLGENV6 6 Catalog Envelope
              COVERCOLOR Color Cover Copy
              CRCKPEEL Crack N Peel Label
              CUSTOM Custom
              CVRFUTURA Futura Cover
              ENV6x9 Standard 6X9 Envelope
              ENV9X12 Standard 9X12 Envelope
              ETHCERT Ethicon Certificate
              GLOSSCOVER Gloss Cover
              GLOSSTEXT Gloss Text
              HOTSTEXT Hots Text
              INDEX Index
              LABEL80 80 Up Label
              MICROPRT Micro Print
              OFFSET Offset
              PART2 2 Part
              PART3 3 Part
              PART4 4 Part
              PART5 5 Part
              PART6 6 Part
              PERF 12 inch Perfed
              PERMMAT Perm Mat Ad
              PRECUTTAB Pre-Cut Tab
              PREPERF Pre-Perforated
              RECYL Recycled
              SE10ENV 10 Standard Envelope
              SE10ITENV 10 Inside Tint Envelope
              SE9ENV 9 Stanard Envelope
              TAG Tag
              TEXT Text
              TEXTCOLOR Text Color Copy
              TEXTFUTURA Futura Text
              TEXTLASER Text Laser Print
              TRANSPRNCY Transparencies
              VELLUM Vellum
              VELLUM3HP Vellum 3HP
              WE10ENV 10 Window Envelope
              WE9ENV 9 Windor Envelope
              WE9ITENV 9 Inside Tint Window Envelope
              Paper Stock Color
              Black
              Blue
              Buff
              Canary
              Cherry
              Clear
              Cream
              Custom
              Goldrenrod
              Gray
              Green
              Ivory
              Lavender
              Manilla
              NCRPinkCanary
              NCRWhiteBlue
              NCRWhiteBlueCanary
              NCRWhiteCanary
              NCRWhiteCanaryPink
              NCRWhiteCanaryPinkGoldenrod
              NCRWhiteGreen
              NCRWhiteGoldenrodYellow
              NCRWhitePink
              NCRWhiteWhite
              Opaque
              Orange
              Orchid
              Peach
              Pink
              Purple
              Salmon
              Tan
              Violet
              White
              Finished Trim Sizes (listed - width x length)
              11 x 17
              18 x 24 Poster
              24 x 36 Poster
              3 x 5
              36 x 24 Poster
              4 x 6
              475 x 7
              475 x 775
              55 x 85
              6 x 4
              7 x 9
              7385 x 9 (RSI Std)
              85 x 11
              825 x 10875
              825 x 11 (RA product profile std)
              8375 x 10875
              9 x 12
              A4
              A5
              Other - Custom size listed below
              Drilling Locations
              1CENTER
              1LEFTTOP
              1TOPCENTER
              2LEFT
              2LEFT2TOP
              2TOP
              2TOP2LEFT
              2TOP3LEFT
              2TOP5LEFT
              2TOP5RIGHT
              3BOTTOM
              3LEFT
              3LEFT2TOP
              3LEFT3TOP
              3RIGHT
              3TOP
              3TOP5LEFT
              5BOTTOM
              5CENTER
              5LEFT
              5RIGHT
              5RIGHT2TOP
              5TOP
              For TRI fold - select Z or C type Description
              HALF Half
              C C Fold
              DBLEPARLL Double Parallel
              OFFSETZ Offset Z
              SAMPLE See Sample
              SHORT Short Fold
              V V Fold
              Z Z Fold
              Number of Pieces per Poly Wrap
              Publication length Number per Poly Wrap
              77 or more pages 1
              33 to 76 pages 25
              3 to 32 pages 50
              1 or 2 pages 100
              Comments
              CoverText Stock Spine
              100 Gloss Cover If your publication uses a spine make note of that in the comments field Be sure to include the spine as the last page of your PDF Do NOT include that page as part of the publication page count Because the addition of a spine will create an odd page count in the PDF contact a Super User to submit your publication via PDFdirect with an exception tool
              100 Gloss Text
              100 Text
              10pt C1S Cover
              10pt C2S Cover
              10pt C2S Text
              10pt Text Stock
              110 White Index
              12pt C1S Cover
              20 White Opaque Bond
              50 Colored Offset
              50 White Offset
              50 White Opaque
              60 Cover Stock
              60 White Offset
              80 Gloss Cover
              80 Gloss Text
              8pt C1S White
              90 White Index
              CoverText Ink
              Black
              Black + 1 PMS color Type in PMS color
              Black + 2 PMS colors Type in PMS colors
              4 color
              4 color over black
              4 color + 1 PMS color Type in PMS color
              4 color over black + 1 PMS color Type in PMS color
              4 color + 2 PMS colors Type in PMS colors
              4 color + aqueous
              4 color + varnish
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Cannot use quote symbol that is---- Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information White RRD must provide this information NA NA NA NA NA NA 85 11 SIDE NA NA NA NA HALF 85 x 11 50 RRD must provide this information
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B NA PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information GLOSS TEXT 80 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA NA NA NA HALF 85 x 11 RRD must provide this information
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              EA 1 1 See DocMan for the Cost Center selections associated with each Business Group Black amp White B PERFECT PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 2 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA 516 3LEFT NA NA NA NA RRD must provide this information Cover Stock = 90 White IndexText Stock = 20 White Opaque BondCover Ink = BlackText Ink = BlackSpine = If included as last page of PDF
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions EA 1 1 Marketing Commercial Marketing Other November 2008 5 Black amp White B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 4 16 4 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 475 7 SIDE NA NA NA HALF 425 x 7 50 RRD must provide this information Text Stock = 20 White Opaque BondText Ink = Black PN-25192
              Corp 17501
              Bill To 69
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions EA 1 1 Marketing Commercial Marketing Other November 2008 5 Black amp White B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 4 16 4 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 475 7 SIDE NA NA NA HALF 425 x 7 50 RRD must provide this information Text Stock = 20 White Opaque BondText Ink = Black PN-25192
              Details of the Rockwell Automation Print Specifications sheet
              This print specifications sheet is designed with multiple purposes- It is a vehicle to get the most accurate print specifications to RA-approved print vendors- It provides authors with an explanation of all necessary fields to complete before attaching the sheet to your PDF- It provides separate tabs so that an author can fill in all fields related to the publication on the Generic tab or publication-specific template-type tabs to minimize the number of fields an author must completeTo facilitate the most efficient use of this sheet we recommend that you click on the publication-specific tab that most closely fits you publication and use that to complete the print specificationsIMPORTANT Because this sheet was constructed using a sheet that RR Donnelley (RRD) uses to load print specifications there are some columns hidden For example the first field you must complete is Column E or Publication Number Columns A to D are used for RRD purposes and with information only representatives of that RA-approved printer can completeDO NOT delete any hidden columns from the tab you choose to use
              Definitions of Each Tab in Sheet
              Generic pub print specs Single sheet with all required columns for necessary specifications None of the columns are completed All must be completed before attaching the sheet to your PDFThis tab has 39 blank fields you must complete via free text type or pull-down menus
              IN RN pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to installation instructions (IN) and release notes (RN) However you can use this sheet for other publications that are similar to INs and RNsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              UM RM PM pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to user manuals (UM) reference manuals (RM) and programming manuals (PM) However you can use this sheet for other publications that are similar to UMs RMs and PMsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              AP PP pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to application solutions (AP) and product profiles (PP) However you can use this sheet for other publications that are similar to APs and PPsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              BR pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to brochures (BR) However you can use this sheet for other publications that are similar to BRsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              Field definitions Description of information fields used throughout the spreadsheet tabs that may not be immediately obvious to a user
              Attach Print Specs to PDF
              For Acrobat 80 follow these steps1 Open the PDF2 Click on DocumentgtAttach A File A new section appears at the bottom of the PDF3 Browse to the MS Excel file with the print specs and add it to the PDFFor Acrobat 70 follow these steps1 Open the PDF2 Click on the Attachments tab next to the publications bookmarks A new section appears at the bottom of the PDF3 Click on the Add button in the bottom section of the PDF4 Browse to the MS Excel file with the print specs and add it to the PDFFor Acrobat 60 follow these steps1 Open the PDF2 Go to the backcover of the PDF3 Click on the Tools pull-down menu4 Click on this sequence of menu options - Advanced Commenting Attach Attach File Tool A paper clip appears5 Click to put the paper clip somewhere on the backcover The browse window appears6 Browse to the MS Excel file with the print specs and add it to the PDFIMPORTANT If you are using Acrobat 50 or earlier please upgrade
              RA-QR005C-EN-E 608
Page 5: USB-to-ControlNet Cable - Rockwell Automationliterature.rockwellautomation.com/idc/groups/literature/documents/... · USB-to-ControlNet Cable Catalog Number 1784-U2CN Topic Page Important

USB-to-ControlNet Cable 5

Install the CableFollow these procedures to install the cable

Obtain the Device Driver for the Cable

Follow these steps to download and install the device driver for the cable

1 Visit httpwwwrockwellautomationcomknowledgebase

2 Open tech note ID 55431 and follow the instructions in the tech note to install the driver

ATTENTION This equipment is sensitive to electrostatic discharge which can cause internal damage and affect normal operation Follow these guidelines when you handle this equipmentbull Touch a grounded object to discharge potential static

bull Do not touch connectors or pins

bull Store the equipment in appropriate static-safe packaging when not in use

IMPORTANT A minimum of RSLinx Classic software version 251 is required for use with the cable

IMPORTANT If RSLinx Classic software version 254 or later is installed on the computer the device driver is already installed on the computer Skip this section

Publication 1784-IN047A-EN-P - November 2008

6 USB-to-ControlNet Cable

Configure and Connect the Cable

1 Use the rotary switches to set the module node address to a valid number (1hellip99)

2 Insert the end of the cable having the USB connector into a USB port on a computer

ATTENTION USB and ControlNet connection lengths must be less than 3 meters Do not attempt to extend the cables

Node Address (Rotary) Switches

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 7

3 Insert the end of the cable having the RJ45 network connector into the ControlNet network access port (NAP) of a ControlNet network-enabled device

Traffic Analyzer Software

The 1784-U2CN cable is designed to work with Frontlinersquos NetDecoder traffic analyzer software For more information on Frontlinersquos product go to either httpwwwrockwellautomationcomencompass or httpwwwftecom

USB Cable

RJ45 ControlNet Network Connector

Publication 1784-IN047A-EN-P - November 2008

8 USB-to-ControlNet Cable

Product Dimensions

The following illustration shows the product dimensions

USB Cable Length 061 m (2 ft)

Enclosure Length 762 cm (3 in) Width 508 cm (2 in) Thickness 254 cm (1 in)

ControlNet NAP Cable Length 305 m (10 ft)

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 9

Status IndicatorsThe following table describes the cable status indicators

Indicator Status Description

USB Green The cable is configured but no network traffic is present

Flashing green Network traffic is present

Off Unable to transfer data

bull Disconnected from host

bull In one of the following states

ndash default

ndash powered

ndash address

ndash suspend

USB

ControlNet Network Status

Module Status

Publication 1784-IN047A-EN-P - November 2008

10 USB-to-ControlNet Cable

Module Status (MS) Green The cable is operating normally

Off No power to the cable

Flashing green The cable is operating in a normal condition and is online with no connections established

bull The cable may be in Standby mode

bull The cable needs commissioning due to missing incomplete or incorrect configuration

Flashing red The cable has a recoverable fault

Red The cable has an unrecoverable fault and may need to be replaced

Flashing redgreen

The cable is performing a self-test

ControlNet Network Status (NS)

Off Not on network

Red Network interface faulted

Flashing redgreen

Invalid network configuration (for example a MAC ID above UMAX)

Flashing red bull Duplicate node detected

bull Link fault

bull No MAC frames received

Flashing green bull Temporary channel error

bull Listen only

Green Normal operation MAC frame received without error

Indicator Status Description

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 11

Specifications

USB-to-ControlNet Cable Catalog Number 1784-U2CN

Attribute Value

Enclosure type rating Meets IP30

Power dissipation max 05 W

Supply voltage 500V DC 525V DC max

Supply current 75 mA

Power consumption max 05 W

Isolation voltage 30V continuous Basic Insulation Type Type tested at 500V AC for 60 s ControlNet to USB

Wiring category(1)

(1) Use this Conductor Category information for planning conductor routing Refer to Industrial Automation Wiring and Grounding Guidelines publication 1770-41

2 - on communication ports

ControlNet current value 70 mA 24V

Publication 1784-IN047A-EN-P - November 2008

12 USB-to-ControlNet Cable

Environmental Specifications

Attribute Value

Temperature operating

IEC 60068-2-1 (Test Ad Operating Cold) IEC 60068-2-2 (Test Bd Operating Dry Heat) IEC 60068-2-14 (Test Nb Operating Thermal Shock) 0hellip55 degC (32hellip131 degF)

Temperature nonoperating

IEC 60068-2-1 (Test Ab Unpackaged Nonoperating Cold) IEC 60068-2-2 (Test Bb Unpackaged Nonoperating Dry Heat) IEC 60068-2-14 (Test Na Unpackaged Nonoperating Thermal Shock) -10hellip85 degC (14hellip185 degF)

Relative humidity IEC 60068-2-30 (Test Db Unpackaged Damp Heat) 5hellip95 noncondensing

Nonoperating shock IEC 60068-2-27 (Test Ea Unpackaged Shock) 1000 mm (328 ft)

Emissions CISPR 11 Group 1 Class A

ESD immunity IEC 61000-4-2 8 kV air discharges

Radiated RF immunity IEC 61000-4-3 10Vm with 1 kHz sine-wave 80 AM from 80hellip2000 MHz 10Vm with 200 Hz 50 Pulse 100 AM at 900 MHz 10Vm with 200 Hz 50 Pulse 100 AM at 1890 MHz 10Vm with 1 kHz sine-wave 80 AM from 2000hellip2700 MHz

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 13

Certifications

Certifications (when product is marked)(1)

Value

c-UL-us UL Listed Industrial Control Equipment certified for US and Canada See UL File E65584

CE European Union 2004108EC EMC Directive compliant with EN 61326-1 MeasControlLab Industrial Requirements EN 61000-6-2 Industrial Immunity EN 61000-6-4 Industrial Emissions EN 61131-2 Programmable Controllers (Clause 8 Zone A amp B)

C-Tick Australian Radiocommunications Act compliant with ASNZS CISPR 11 Industrial Emissions

CI ControlNet International conformance tested to ControlNet specifications

(1) See the Product Certification link at httpwwwabcom for Declarations of Conformity Certificates and other certification details

Publication 1784-IN047A-EN-P - November 2008

14 USB-to-ControlNet Cable

Additional ResourcesThese documents contain additional information concerning related Rockwell Automation products

Resource Description

ControlNet Coax Media Planning and Installation Guide publication CNET-IN002

Provides ControlNet network planning information

Industrial Automation Wiring and Grounding Guidelines publication 1770-41

Provides general guidelines for installing a Rockwell Automation industrial system

Product Certifications website httpwwwabcom

Provides declarations of conformity certificates and other certification details

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 15

Notes

Publication 1784-IN047A-EN-P - November 2008

Rockwell Automation SupportRockwell Automation provides technical information on the Web to assist you in using its products At httpsupportrockwellautomationcom you can find technical manuals a knowledge base of FAQs technical and application notes sample code and links to software service packs and a MySupport feature that you can customize to make the best use of these tools

For an additional level of technical phone support for installation configuration and troubleshooting we offer TechConnect support programs For more information contact your local distributor or Rockwell Automation representative or visit httpsupportrockwellautomationcom

Installation Assistance

If you experience a problem within the first 24 hours of installation please review the information thats contained in this manual You can also contact a special Customer Support number for initial help in getting your product up and running

New Product Satisfaction Return

Rockwell Automation tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility However if your product is not functioning and needs to be returned follow these procedures

Allen-Bradley Data Highway Plus DH+ PLC-5 RSLinx Rockwell Automation SLC and TechConnect are trademarks of Rockwell Automation Inc

Trademarks not belonging to Rockwell Automation are property of their respective companies

United States 14406463434 Monday ndash Friday 8 am ndash 5 pm EST

Outside United States Please contact your local Rockwell Automation representative for any technical support issues

United States Contact your distributor You must provide a Customer Support case number (see phone number above to obtain one) to your distributor in order to complete the return process

Outside United States Please contact your local Rockwell Automation representative for the return procedure

Publication 1784-IN047A-EN-P - November 2008 PN-25192Copyright copy 2008 Rockwell Automation Inc All rights reserved Printed in the USA

  • Publication 1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions
    • Important User Information
    • Environment and Enclosure
    • About the Cable
    • Install the Cable
      • Obtain the Device Driver for the Cable
      • Configure and Connect the Cable
      • Traffic Analyzer Software
      • Product Dimensions
        • Status Indicators
        • Specifications
        • Additional Resources
        • Back Cover

            • ltlt ASCII85EncodePages false AllowTransparency false AutoPositionEPSFiles false AutoRotatePages None Binding Left CalGrayProfile (Gray Gamma 22) CalRGBProfile (sRGB IEC61966-21) CalCMYKProfile (Euroscale Uncoated v2) sRGBProfile (sRGB IEC61966-21) CannotEmbedFontPolicy Error CompatibilityLevel 14 CompressObjects Tags CompressPages true ConvertImagesToIndexed true PassThroughJPEGImages true CreateJDFFile false CreateJobTicket true DefaultRenderingIntent Default DetectBlends true DetectCurves 00000 ColorConversionStrategy LeaveColorUnchanged DoThumbnails false EmbedAllFonts true EmbedOpenType false ParseICCProfilesInComments true EmbedJobOptions true DSCReportingLevel 0 EmitDSCWarnings false EndPage -1 ImageMemory 1048576 LockDistillerParams true MaxSubsetPct 99 Optimize true OPM 1 ParseDSCComments false ParseDSCCommentsForDocInfo false PreserveCopyPage true PreserveDICMYKValues true PreserveEPSInfo false PreserveFlatness true PreserveHalftoneInfo true PreserveOPIComments false PreserveOverprintSettings true StartPage 1 SubsetFonts false TransferFunctionInfo Apply UCRandBGInfo Preserve UsePrologue false ColorSettingsFile (None) AlwaysEmbed [ true ArialMT ] NeverEmbed [ true ] AntiAliasColorImages false CropColorImages true ColorImageMinResolution 150 ColorImageMinResolutionPolicy OK DownsampleColorImages true ColorImageDownsampleType Bicubic ColorImageResolution 150 ColorImageDepth 8 ColorImageMinDownsampleDepth 1 ColorImageDownsampleThreshold 100000 EncodeColorImages true ColorImageFilter FlateEncode AutoFilterColorImages false ColorImageAutoFilterStrategy JPEG ColorACSImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt ColorImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt JPEG2000ColorACSImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt JPEG2000ColorImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt AntiAliasGrayImages false CropGrayImages true GrayImageMinResolution 150 GrayImageMinResolutionPolicy OK DownsampleGrayImages true GrayImageDownsampleType Bicubic GrayImageResolution 150 GrayImageDepth 8 GrayImageMinDownsampleDepth 2 GrayImageDownsampleThreshold 100000 EncodeGrayImages true GrayImageFilter FlateEncode AutoFilterGrayImages false GrayImageAutoFilterStrategy JPEG GrayACSImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt GrayImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt JPEG2000GrayACSImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt JPEG2000GrayImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt AntiAliasMonoImages false CropMonoImages true MonoImageMinResolution 900 MonoImageMinResolutionPolicy OK DownsampleMonoImages true MonoImageDownsampleType Bicubic MonoImageResolution 900 MonoImageDepth -1 MonoImageDownsampleThreshold 100000 EncodeMonoImages true MonoImageFilter CCITTFaxEncode MonoImageDict ltlt K -1 gtgt AllowPSXObjects true CheckCompliance [ None ] PDFX1aCheck false PDFX3Check false PDFXCompliantPDFOnly false PDFXNoTrimBoxError true PDFXTrimBoxToMediaBoxOffset [ 000000 000000 000000 000000 ] PDFXSetBleedBoxToMediaBox true PDFXBleedBoxToTrimBoxOffset [ 000000 000000 000000 000000 ] PDFXOutputIntentProfile (None) PDFXOutputConditionIdentifier () PDFXOutputCondition () PDFXRegistryName (httpwwwcolororg) PDFXTrapped False SyntheticBoldness 1000000 Description ltlt JPN ltFEFF3053306e8a2d5b9a306f300130d330b830cd30b9658766f8306e8868793a304a3088307353705237306b90693057305f00200050004400460020658766f830924f5c62103059308b3068304d306b4f7f75283057307e305930023053306e8a2d5b9a30674f5c62103057305f00200050004400460020658766f8306f0020004100630072006f0062006100740020304a30883073002000520065006100640065007200200035002e003000204ee5964d30678868793a3067304d307e30593002gt DEU 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 FRA 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 PTB 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 DAN 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 NLD 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 ESP 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 SUO ltFEFF004e00e4006900640065006e002000610073006500740075007300740065006e0020006100760075006c006c006100200076006f006900740020006c0075006f006400610020006a0061002000740075006c006f00730074006100610020005000440046002d0061007300690061006b00690072006a006f006a0061002c0020006a006f006900640065006e0020006500730069006b0061007400730065006c00750020006e00e400790074007400e400e40020006c0075006f00740065007400740061007600610073007400690020006c006f00700070007500740075006c006f006b00730065006e002e0020005000440046002d0061007300690061006b00690072006a0061007400200076006f0069006400610061006e0020006100760061007400610020004100630072006f006200610074002d0020006a0061002000520065006100640065007200200035002e00300020002d006f0068006a0065006c006d0061006c006c0061002000740061006900200075007500640065006d006d0061006c006c0061002000760065007200730069006f006c006c0061002egt ITA ltFEFF00550073006100720065002000710075006500730074006500200069006d0070006f007300740061007a0069006f006e00690020007000650072002000630072006500610072006500200064006f00630075006d0065006e007400690020005000440046002000610064006100740074006900200070006500720020006c00610020007300740061006d00700061002000650020006c0061002000760069007300750061006c0069007a007a0061007a0069006f006e006500200064006900200064006f00630075006d0065006e0074006900200061007a00690065006e00640061006c0069002e0020004900200064006f00630075006d0065006e00740069002000500044004600200070006f00730073006f006e006f0020006500730073006500720065002000610070006500720074006900200063006f006e0020004100630072006f00620061007400200065002000520065006100640065007200200035002e003000200065002000760065007200730069006f006e006900200073007500630063006500730073006900760065002egt NOR 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 SVE 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 ENU (Rockwell Job Options for Web-only PDF Files) gtgtgtgt setdistillerparamsltlt HWResolution [2540 2540] PageSize [792000 1224000]gtgt setpagedevice

              Intro

              ampLRA-QR005B-EN-E 308

              Generic pub print specs

              ampCItem Setup Sheet for Conversion Transfers
              ampLJIT-D-print SpreadsheetampCRA-QR005C-EN-EampRampD ampT

              IN RN pub type specs

              UM RM PM pub type specs

              AP PP pub type specs

              BR pub type specs

              Field definitions

              ampL04032006ampRampP
              PackagingOrdering Unit Of Measure
              EA = Each
              PK = Pack
              PD = Pad
              RL = Roll
              BK = Book
              CT = Carton
              BX = Box
              ST = Set
              Multiple Order Qty
              Separate methods of ordering same item For example if an item is packaged 50 per pad 5 pads per carton You can set the order qty as 50 each (one pad) or 250 each (1 ctn)
              Business Group
              The business group that the publication supports Your choice here determines the list you choose from for Cost Center
              CorporateBusiness Development
              Finance
              Human Resources
              IT
              Logistics
              Manufacturing
              Marketing Commercial
              Marketing Europe
              Marketing Other
              Operations
              Order Services
              Other
              Process Improvement
              Procurement
              Quality
              Sales
              Max Order Quantity
              Presale items = 100
              Postsale items = 5
              NOTE You can use other quantities but the delivery may take a bit longer because a system admin must approve it
              Item Category - Form (F) or Book (B)
              Form (F) = Any publication that is a single sheet (ie 1 or 2 pages) an envelope or carbonless form
              Book (B) = Any publication that contains 3 or more pages
              BindingStitching
              For a Form (F) use
              CARBONLESS
              CUTSHEET
              ENVELOPE
              For a Book (B) use
              LOOSE LOOSE -Loose Leaf
              PERFECT PERFECT - Perfect Bound
              PLASTCOIL PLASTCOIL - Plastic Coil (Coil Bound)
              SADDLE SADDLE - Saddle Stitch
              STAPLED1 STAPLED1 -1 position
              STAPLED1B STAPLED1B - bottom 1 position
              STAPLED2 STAPLED2 - 2 positions
              THERMAL THERMAL - Thermal bound (Tape bound)
              THERMALO THERMALO - Thermal Bound (Tape bound - offline)
              WIRE O Wire O - Double Wire Bound (offline)
              Saddle-Stitch Items
              20 sheets max on 20 (text and cover)
              19 sheets max on 20 (text) and 24 (cover)
              18 sheets max on 24 (text and cover)
              All page quantities must be divisible by 4
              Tape Bound Items
              125 sheets max on 20 no cover
              120 sheets max wcover (90 index unless indicated otherwise)
              Perfect Bound Items
              475 sheets max on 20 no cover
              470 sheets max wcover (90 index unless indicated otherwise)
              Double Wire Bound Items
              40 sheets max on 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
              Coil Bound Items
              290 sheets max of 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
              Sides Printed
              Head2Head = Most common Double-sided printing with headers on both pages lining up at the top of the page
              Simplex = Single-sided printing
              Head2Toe = Least common Double-sided printing with header on one page lining up with the footer on the other page
              Number of Forms to a Sheet
              Number of publication pages printed on a sheet of paper at the printerFor example if a 4-page 85 x 11 publication is printed on the front and back sides of an 11 x 17 sheet of paper that is folded in half the Number of Forms to a Sheet = 4Example 2 If a 4-page 55 x 85 publication is printed on the front and back sides of an 85 x 11 sheet of paper that is folded in half the Number of forms to a Sheet = 4
              Number of Sheets Required to Print
              Number of sheets of paper required to print the publicationFor example if a 16-page 85 x 11 publication is printed on the front and back sides of four 11 x 17 sheets of paper that are folded in half and saddle stitched together the Number of Sheets Required to Print = 4Example 4 If a 4-page 55 x 85 publication is printed on the front and back sides of one 85 x 11 sheet of paper that is folded in half the Number of Sheets Required to Print = 1
              Paper Stock Type
              Description
              PLAIN Bond
              ACNTCVR Accent Cover
              BOND3H Bond (3-hole)
              BOOKENV Booklet Envelope
              C1SGLOSS C1S Gloss Finish
              C1SMATTE C1S Matt Finish
              C2SGLOSS C2S Gloss Finish
              C2SMATTE C2S Matt Finish
              CARD Card Stock
              CATLGENV Catalog Envelope
              CATLGENV6 6 Catalog Envelope
              COVERCOLOR Color Cover Copy
              CRCKPEEL Crack N Peel Label
              CUSTOM Custom
              CVRFUTURA Futura Cover
              ENV6x9 Standard 6X9 Envelope
              ENV9X12 Standard 9X12 Envelope
              ETHCERT Ethicon Certificate
              GLOSSCOVER Gloss Cover
              GLOSSTEXT Gloss Text
              HOTSTEXT Hots Text
              INDEX Index
              LABEL80 80 Up Label
              MICROPRT Micro Print
              OFFSET Offset
              PART2 2 Part
              PART3 3 Part
              PART4 4 Part
              PART5 5 Part
              PART6 6 Part
              PERF 12 inch Perfed
              PERMMAT Perm Mat Ad
              PRECUTTAB Pre-Cut Tab
              PREPERF Pre-Perforated
              RECYL Recycled
              SE10ENV 10 Standard Envelope
              SE10ITENV 10 Inside Tint Envelope
              SE9ENV 9 Stanard Envelope
              TAG Tag
              TEXT Text
              TEXTCOLOR Text Color Copy
              TEXTFUTURA Futura Text
              TEXTLASER Text Laser Print
              TRANSPRNCY Transparencies
              VELLUM Vellum
              VELLUM3HP Vellum 3HP
              WE10ENV 10 Window Envelope
              WE9ENV 9 Windor Envelope
              WE9ITENV 9 Inside Tint Window Envelope
              Paper Stock Color
              Black
              Blue
              Buff
              Canary
              Cherry
              Clear
              Cream
              Custom
              Goldrenrod
              Gray
              Green
              Ivory
              Lavender
              Manilla
              NCRPinkCanary
              NCRWhiteBlue
              NCRWhiteBlueCanary
              NCRWhiteCanary
              NCRWhiteCanaryPink
              NCRWhiteCanaryPinkGoldenrod
              NCRWhiteGreen
              NCRWhiteGoldenrodYellow
              NCRWhitePink
              NCRWhiteWhite
              Opaque
              Orange
              Orchid
              Peach
              Pink
              Purple
              Salmon
              Tan
              Violet
              White
              Finished Trim Sizes (listed - width x length)
              11 x 17
              18 x 24 Poster
              24 x 36 Poster
              3 x 5
              36 x 24 Poster
              4 x 6
              475 x 7
              475 x 775
              55 x 85
              6 x 4
              7 x 9
              7385 x 9 (RSI Std)
              85 x 11
              825 x 10875
              825 x 11 (RA product profile std)
              8375 x 10875
              9 x 12
              A4
              A5
              Other - Custom size listed below
              Drilling Locations
              1CENTER
              1LEFTTOP
              1TOPCENTER
              2LEFT
              2LEFT2TOP
              2TOP
              2TOP2LEFT
              2TOP3LEFT
              2TOP5LEFT
              2TOP5RIGHT
              3BOTTOM
              3LEFT
              3LEFT2TOP
              3LEFT3TOP
              3RIGHT
              3TOP
              3TOP5LEFT
              5BOTTOM
              5CENTER
              5LEFT
              5RIGHT
              5RIGHT2TOP
              5TOP
              For TRI fold - select Z or C type Description
              HALF Half
              C C Fold
              DBLEPARLL Double Parallel
              OFFSETZ Offset Z
              SAMPLE See Sample
              SHORT Short Fold
              V V Fold
              Z Z Fold
              Number of Pieces per Poly Wrap
              Publication length Number per Poly Wrap
              77 or more pages 1
              33 to 76 pages 25
              3 to 32 pages 50
              1 or 2 pages 100
              Comments
              CoverText Stock Spine
              100 Gloss Cover If your publication uses a spine make note of that in the comments field Be sure to include the spine as the last page of your PDF Do NOT include that page as part of the publication page count Because the addition of a spine will create an odd page count in the PDF contact a Super User to submit your publication via PDFdirect with an exception tool
              100 Gloss Text
              100 Text
              10pt C1S Cover
              10pt C2S Cover
              10pt C2S Text
              10pt Text Stock
              110 White Index
              12pt C1S Cover
              20 White Opaque Bond
              50 Colored Offset
              50 White Offset
              50 White Opaque
              60 Cover Stock
              60 White Offset
              80 Gloss Cover
              80 Gloss Text
              8pt C1S White
              90 White Index
              CoverText Ink
              Black
              Black + 1 PMS color Type in PMS color
              Black + 2 PMS colors Type in PMS colors
              4 color
              4 color over black
              4 color + 1 PMS color Type in PMS color
              4 color over black + 1 PMS color Type in PMS color
              4 color + 2 PMS colors Type in PMS colors
              4 color + aqueous
              4 color + varnish
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Cannot use quote symbol that is---- Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information White RRD must provide this information NA NA NA NA NA NA 85 11 SIDE NA NA NA NA HALF 85 x 11 50 RRD must provide this information
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B NA PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information GLOSS TEXT 80 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA NA NA NA HALF 85 x 11 RRD must provide this information
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              EA 1 1 See DocMan for the Cost Center selections associated with each Business Group Black amp White B PERFECT PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 2 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA 516 3LEFT NA NA NA NA RRD must provide this information Cover Stock = 90 White IndexText Stock = 20 White Opaque BondCover Ink = BlackText Ink = BlackSpine = If included as last page of PDF
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions EA 1 1 Marketing Commercial Marketing Other November 2008 5 Black amp White B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 4 16 4 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 475 7 SIDE NA NA NA HALF 425 x 7 50 RRD must provide this information Text Stock = 20 White Opaque BondText Ink = Black PN-25192
              Corp 17501
              Bill To 69
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions EA 1 1 Marketing Commercial Marketing Other November 2008 5 Black amp White B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 4 16 4 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 475 7 SIDE NA NA NA HALF 425 x 7 50 RRD must provide this information Text Stock = 20 White Opaque BondText Ink = Black PN-25192
              Details of the Rockwell Automation Print Specifications sheet
              This print specifications sheet is designed with multiple purposes- It is a vehicle to get the most accurate print specifications to RA-approved print vendors- It provides authors with an explanation of all necessary fields to complete before attaching the sheet to your PDF- It provides separate tabs so that an author can fill in all fields related to the publication on the Generic tab or publication-specific template-type tabs to minimize the number of fields an author must completeTo facilitate the most efficient use of this sheet we recommend that you click on the publication-specific tab that most closely fits you publication and use that to complete the print specificationsIMPORTANT Because this sheet was constructed using a sheet that RR Donnelley (RRD) uses to load print specifications there are some columns hidden For example the first field you must complete is Column E or Publication Number Columns A to D are used for RRD purposes and with information only representatives of that RA-approved printer can completeDO NOT delete any hidden columns from the tab you choose to use
              Definitions of Each Tab in Sheet
              Generic pub print specs Single sheet with all required columns for necessary specifications None of the columns are completed All must be completed before attaching the sheet to your PDFThis tab has 39 blank fields you must complete via free text type or pull-down menus
              IN RN pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to installation instructions (IN) and release notes (RN) However you can use this sheet for other publications that are similar to INs and RNsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              UM RM PM pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to user manuals (UM) reference manuals (RM) and programming manuals (PM) However you can use this sheet for other publications that are similar to UMs RMs and PMsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              AP PP pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to application solutions (AP) and product profiles (PP) However you can use this sheet for other publications that are similar to APs and PPsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              BR pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to brochures (BR) However you can use this sheet for other publications that are similar to BRsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              Field definitions Description of information fields used throughout the spreadsheet tabs that may not be immediately obvious to a user
              Attach Print Specs to PDF
              For Acrobat 80 follow these steps1 Open the PDF2 Click on DocumentgtAttach A File A new section appears at the bottom of the PDF3 Browse to the MS Excel file with the print specs and add it to the PDFFor Acrobat 70 follow these steps1 Open the PDF2 Click on the Attachments tab next to the publications bookmarks A new section appears at the bottom of the PDF3 Click on the Add button in the bottom section of the PDF4 Browse to the MS Excel file with the print specs and add it to the PDFFor Acrobat 60 follow these steps1 Open the PDF2 Go to the backcover of the PDF3 Click on the Tools pull-down menu4 Click on this sequence of menu options - Advanced Commenting Attach Attach File Tool A paper clip appears5 Click to put the paper clip somewhere on the backcover The browse window appears6 Browse to the MS Excel file with the print specs and add it to the PDFIMPORTANT If you are using Acrobat 50 or earlier please upgrade
              RA-QR005C-EN-E 608
Page 6: USB-to-ControlNet Cable - Rockwell Automationliterature.rockwellautomation.com/idc/groups/literature/documents/... · USB-to-ControlNet Cable Catalog Number 1784-U2CN Topic Page Important

6 USB-to-ControlNet Cable

Configure and Connect the Cable

1 Use the rotary switches to set the module node address to a valid number (1hellip99)

2 Insert the end of the cable having the USB connector into a USB port on a computer

ATTENTION USB and ControlNet connection lengths must be less than 3 meters Do not attempt to extend the cables

Node Address (Rotary) Switches

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 7

3 Insert the end of the cable having the RJ45 network connector into the ControlNet network access port (NAP) of a ControlNet network-enabled device

Traffic Analyzer Software

The 1784-U2CN cable is designed to work with Frontlinersquos NetDecoder traffic analyzer software For more information on Frontlinersquos product go to either httpwwwrockwellautomationcomencompass or httpwwwftecom

USB Cable

RJ45 ControlNet Network Connector

Publication 1784-IN047A-EN-P - November 2008

8 USB-to-ControlNet Cable

Product Dimensions

The following illustration shows the product dimensions

USB Cable Length 061 m (2 ft)

Enclosure Length 762 cm (3 in) Width 508 cm (2 in) Thickness 254 cm (1 in)

ControlNet NAP Cable Length 305 m (10 ft)

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 9

Status IndicatorsThe following table describes the cable status indicators

Indicator Status Description

USB Green The cable is configured but no network traffic is present

Flashing green Network traffic is present

Off Unable to transfer data

bull Disconnected from host

bull In one of the following states

ndash default

ndash powered

ndash address

ndash suspend

USB

ControlNet Network Status

Module Status

Publication 1784-IN047A-EN-P - November 2008

10 USB-to-ControlNet Cable

Module Status (MS) Green The cable is operating normally

Off No power to the cable

Flashing green The cable is operating in a normal condition and is online with no connections established

bull The cable may be in Standby mode

bull The cable needs commissioning due to missing incomplete or incorrect configuration

Flashing red The cable has a recoverable fault

Red The cable has an unrecoverable fault and may need to be replaced

Flashing redgreen

The cable is performing a self-test

ControlNet Network Status (NS)

Off Not on network

Red Network interface faulted

Flashing redgreen

Invalid network configuration (for example a MAC ID above UMAX)

Flashing red bull Duplicate node detected

bull Link fault

bull No MAC frames received

Flashing green bull Temporary channel error

bull Listen only

Green Normal operation MAC frame received without error

Indicator Status Description

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 11

Specifications

USB-to-ControlNet Cable Catalog Number 1784-U2CN

Attribute Value

Enclosure type rating Meets IP30

Power dissipation max 05 W

Supply voltage 500V DC 525V DC max

Supply current 75 mA

Power consumption max 05 W

Isolation voltage 30V continuous Basic Insulation Type Type tested at 500V AC for 60 s ControlNet to USB

Wiring category(1)

(1) Use this Conductor Category information for planning conductor routing Refer to Industrial Automation Wiring and Grounding Guidelines publication 1770-41

2 - on communication ports

ControlNet current value 70 mA 24V

Publication 1784-IN047A-EN-P - November 2008

12 USB-to-ControlNet Cable

Environmental Specifications

Attribute Value

Temperature operating

IEC 60068-2-1 (Test Ad Operating Cold) IEC 60068-2-2 (Test Bd Operating Dry Heat) IEC 60068-2-14 (Test Nb Operating Thermal Shock) 0hellip55 degC (32hellip131 degF)

Temperature nonoperating

IEC 60068-2-1 (Test Ab Unpackaged Nonoperating Cold) IEC 60068-2-2 (Test Bb Unpackaged Nonoperating Dry Heat) IEC 60068-2-14 (Test Na Unpackaged Nonoperating Thermal Shock) -10hellip85 degC (14hellip185 degF)

Relative humidity IEC 60068-2-30 (Test Db Unpackaged Damp Heat) 5hellip95 noncondensing

Nonoperating shock IEC 60068-2-27 (Test Ea Unpackaged Shock) 1000 mm (328 ft)

Emissions CISPR 11 Group 1 Class A

ESD immunity IEC 61000-4-2 8 kV air discharges

Radiated RF immunity IEC 61000-4-3 10Vm with 1 kHz sine-wave 80 AM from 80hellip2000 MHz 10Vm with 200 Hz 50 Pulse 100 AM at 900 MHz 10Vm with 200 Hz 50 Pulse 100 AM at 1890 MHz 10Vm with 1 kHz sine-wave 80 AM from 2000hellip2700 MHz

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 13

Certifications

Certifications (when product is marked)(1)

Value

c-UL-us UL Listed Industrial Control Equipment certified for US and Canada See UL File E65584

CE European Union 2004108EC EMC Directive compliant with EN 61326-1 MeasControlLab Industrial Requirements EN 61000-6-2 Industrial Immunity EN 61000-6-4 Industrial Emissions EN 61131-2 Programmable Controllers (Clause 8 Zone A amp B)

C-Tick Australian Radiocommunications Act compliant with ASNZS CISPR 11 Industrial Emissions

CI ControlNet International conformance tested to ControlNet specifications

(1) See the Product Certification link at httpwwwabcom for Declarations of Conformity Certificates and other certification details

Publication 1784-IN047A-EN-P - November 2008

14 USB-to-ControlNet Cable

Additional ResourcesThese documents contain additional information concerning related Rockwell Automation products

Resource Description

ControlNet Coax Media Planning and Installation Guide publication CNET-IN002

Provides ControlNet network planning information

Industrial Automation Wiring and Grounding Guidelines publication 1770-41

Provides general guidelines for installing a Rockwell Automation industrial system

Product Certifications website httpwwwabcom

Provides declarations of conformity certificates and other certification details

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 15

Notes

Publication 1784-IN047A-EN-P - November 2008

Rockwell Automation SupportRockwell Automation provides technical information on the Web to assist you in using its products At httpsupportrockwellautomationcom you can find technical manuals a knowledge base of FAQs technical and application notes sample code and links to software service packs and a MySupport feature that you can customize to make the best use of these tools

For an additional level of technical phone support for installation configuration and troubleshooting we offer TechConnect support programs For more information contact your local distributor or Rockwell Automation representative or visit httpsupportrockwellautomationcom

Installation Assistance

If you experience a problem within the first 24 hours of installation please review the information thats contained in this manual You can also contact a special Customer Support number for initial help in getting your product up and running

New Product Satisfaction Return

Rockwell Automation tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility However if your product is not functioning and needs to be returned follow these procedures

Allen-Bradley Data Highway Plus DH+ PLC-5 RSLinx Rockwell Automation SLC and TechConnect are trademarks of Rockwell Automation Inc

Trademarks not belonging to Rockwell Automation are property of their respective companies

United States 14406463434 Monday ndash Friday 8 am ndash 5 pm EST

Outside United States Please contact your local Rockwell Automation representative for any technical support issues

United States Contact your distributor You must provide a Customer Support case number (see phone number above to obtain one) to your distributor in order to complete the return process

Outside United States Please contact your local Rockwell Automation representative for the return procedure

Publication 1784-IN047A-EN-P - November 2008 PN-25192Copyright copy 2008 Rockwell Automation Inc All rights reserved Printed in the USA

  • Publication 1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions
    • Important User Information
    • Environment and Enclosure
    • About the Cable
    • Install the Cable
      • Obtain the Device Driver for the Cable
      • Configure and Connect the Cable
      • Traffic Analyzer Software
      • Product Dimensions
        • Status Indicators
        • Specifications
        • Additional Resources
        • Back Cover

            • ltlt ASCII85EncodePages false AllowTransparency false AutoPositionEPSFiles false AutoRotatePages None Binding Left CalGrayProfile (Gray Gamma 22) CalRGBProfile (sRGB IEC61966-21) CalCMYKProfile (Euroscale Uncoated v2) sRGBProfile (sRGB IEC61966-21) CannotEmbedFontPolicy Error CompatibilityLevel 14 CompressObjects Tags CompressPages true ConvertImagesToIndexed true PassThroughJPEGImages true CreateJDFFile false CreateJobTicket true DefaultRenderingIntent Default DetectBlends true DetectCurves 00000 ColorConversionStrategy LeaveColorUnchanged DoThumbnails false EmbedAllFonts true EmbedOpenType false ParseICCProfilesInComments true EmbedJobOptions true DSCReportingLevel 0 EmitDSCWarnings false EndPage -1 ImageMemory 1048576 LockDistillerParams true MaxSubsetPct 99 Optimize true OPM 1 ParseDSCComments false ParseDSCCommentsForDocInfo false PreserveCopyPage true PreserveDICMYKValues true PreserveEPSInfo false PreserveFlatness true PreserveHalftoneInfo true PreserveOPIComments false PreserveOverprintSettings true StartPage 1 SubsetFonts false TransferFunctionInfo Apply UCRandBGInfo Preserve UsePrologue false ColorSettingsFile (None) AlwaysEmbed [ true ArialMT ] NeverEmbed [ true ] AntiAliasColorImages false CropColorImages true ColorImageMinResolution 150 ColorImageMinResolutionPolicy OK DownsampleColorImages true ColorImageDownsampleType Bicubic ColorImageResolution 150 ColorImageDepth 8 ColorImageMinDownsampleDepth 1 ColorImageDownsampleThreshold 100000 EncodeColorImages true ColorImageFilter FlateEncode AutoFilterColorImages false ColorImageAutoFilterStrategy JPEG ColorACSImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt ColorImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt JPEG2000ColorACSImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt JPEG2000ColorImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt AntiAliasGrayImages false CropGrayImages true GrayImageMinResolution 150 GrayImageMinResolutionPolicy OK DownsampleGrayImages true GrayImageDownsampleType Bicubic GrayImageResolution 150 GrayImageDepth 8 GrayImageMinDownsampleDepth 2 GrayImageDownsampleThreshold 100000 EncodeGrayImages true GrayImageFilter FlateEncode AutoFilterGrayImages false GrayImageAutoFilterStrategy JPEG GrayACSImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt GrayImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt JPEG2000GrayACSImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt JPEG2000GrayImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt AntiAliasMonoImages false CropMonoImages true MonoImageMinResolution 900 MonoImageMinResolutionPolicy OK DownsampleMonoImages true MonoImageDownsampleType Bicubic MonoImageResolution 900 MonoImageDepth -1 MonoImageDownsampleThreshold 100000 EncodeMonoImages true MonoImageFilter CCITTFaxEncode MonoImageDict ltlt K -1 gtgt AllowPSXObjects true CheckCompliance [ None ] PDFX1aCheck false PDFX3Check false PDFXCompliantPDFOnly false PDFXNoTrimBoxError true PDFXTrimBoxToMediaBoxOffset [ 000000 000000 000000 000000 ] PDFXSetBleedBoxToMediaBox true PDFXBleedBoxToTrimBoxOffset [ 000000 000000 000000 000000 ] PDFXOutputIntentProfile (None) PDFXOutputConditionIdentifier () PDFXOutputCondition () PDFXRegistryName (httpwwwcolororg) PDFXTrapped False SyntheticBoldness 1000000 Description ltlt JPN ltFEFF3053306e8a2d5b9a306f300130d330b830cd30b9658766f8306e8868793a304a3088307353705237306b90693057305f00200050004400460020658766f830924f5c62103059308b3068304d306b4f7f75283057307e305930023053306e8a2d5b9a30674f5c62103057305f00200050004400460020658766f8306f0020004100630072006f0062006100740020304a30883073002000520065006100640065007200200035002e003000204ee5964d30678868793a3067304d307e30593002gt DEU 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 FRA 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 PTB 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 DAN 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 NLD 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 ESP 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 SUO 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 ITA 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 NOR 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 SVE ltFEFF0041006e007600e4006e00640020006400650020006800e4007200200069006e0073007400e4006c006c006e0069006e006700610072006e00610020006e00e40072002000640075002000760069006c006c00200073006b0061007000610020005000440046002d0064006f006b0075006d0065006e007400200073006f006d00200070006100730073006100720020006600f600720020007000e5006c00690074006c006900670020007600690073006e0069006e00670020006f006300680020007500740073006b0072006900660074002000610076002000610066006600e4007200730064006f006b0075006d0065006e0074002e0020005000440046002d0064006f006b0075006d0065006e00740065006e0020006b0061006e002000f600700070006e006100730020006d006500640020004100630072006f0062006100740020006f00630068002000520065006100640065007200200035002e003000200065006c006c00650072002000730065006e006100720065002egt ENU (Rockwell Job Options for Web-only PDF Files) gtgtgtgt setdistillerparamsltlt HWResolution [2540 2540] PageSize [792000 1224000]gtgt setpagedevice

              Intro

              ampLRA-QR005B-EN-E 308

              Generic pub print specs

              ampCItem Setup Sheet for Conversion Transfers
              ampLJIT-D-print SpreadsheetampCRA-QR005C-EN-EampRampD ampT

              IN RN pub type specs

              UM RM PM pub type specs

              AP PP pub type specs

              BR pub type specs

              Field definitions

              ampL04032006ampRampP
              PackagingOrdering Unit Of Measure
              EA = Each
              PK = Pack
              PD = Pad
              RL = Roll
              BK = Book
              CT = Carton
              BX = Box
              ST = Set
              Multiple Order Qty
              Separate methods of ordering same item For example if an item is packaged 50 per pad 5 pads per carton You can set the order qty as 50 each (one pad) or 250 each (1 ctn)
              Business Group
              The business group that the publication supports Your choice here determines the list you choose from for Cost Center
              CorporateBusiness Development
              Finance
              Human Resources
              IT
              Logistics
              Manufacturing
              Marketing Commercial
              Marketing Europe
              Marketing Other
              Operations
              Order Services
              Other
              Process Improvement
              Procurement
              Quality
              Sales
              Max Order Quantity
              Presale items = 100
              Postsale items = 5
              NOTE You can use other quantities but the delivery may take a bit longer because a system admin must approve it
              Item Category - Form (F) or Book (B)
              Form (F) = Any publication that is a single sheet (ie 1 or 2 pages) an envelope or carbonless form
              Book (B) = Any publication that contains 3 or more pages
              BindingStitching
              For a Form (F) use
              CARBONLESS
              CUTSHEET
              ENVELOPE
              For a Book (B) use
              LOOSE LOOSE -Loose Leaf
              PERFECT PERFECT - Perfect Bound
              PLASTCOIL PLASTCOIL - Plastic Coil (Coil Bound)
              SADDLE SADDLE - Saddle Stitch
              STAPLED1 STAPLED1 -1 position
              STAPLED1B STAPLED1B - bottom 1 position
              STAPLED2 STAPLED2 - 2 positions
              THERMAL THERMAL - Thermal bound (Tape bound)
              THERMALO THERMALO - Thermal Bound (Tape bound - offline)
              WIRE O Wire O - Double Wire Bound (offline)
              Saddle-Stitch Items
              20 sheets max on 20 (text and cover)
              19 sheets max on 20 (text) and 24 (cover)
              18 sheets max on 24 (text and cover)
              All page quantities must be divisible by 4
              Tape Bound Items
              125 sheets max on 20 no cover
              120 sheets max wcover (90 index unless indicated otherwise)
              Perfect Bound Items
              475 sheets max on 20 no cover
              470 sheets max wcover (90 index unless indicated otherwise)
              Double Wire Bound Items
              40 sheets max on 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
              Coil Bound Items
              290 sheets max of 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
              Sides Printed
              Head2Head = Most common Double-sided printing with headers on both pages lining up at the top of the page
              Simplex = Single-sided printing
              Head2Toe = Least common Double-sided printing with header on one page lining up with the footer on the other page
              Number of Forms to a Sheet
              Number of publication pages printed on a sheet of paper at the printerFor example if a 4-page 85 x 11 publication is printed on the front and back sides of an 11 x 17 sheet of paper that is folded in half the Number of Forms to a Sheet = 4Example 2 If a 4-page 55 x 85 publication is printed on the front and back sides of an 85 x 11 sheet of paper that is folded in half the Number of forms to a Sheet = 4
              Number of Sheets Required to Print
              Number of sheets of paper required to print the publicationFor example if a 16-page 85 x 11 publication is printed on the front and back sides of four 11 x 17 sheets of paper that are folded in half and saddle stitched together the Number of Sheets Required to Print = 4Example 4 If a 4-page 55 x 85 publication is printed on the front and back sides of one 85 x 11 sheet of paper that is folded in half the Number of Sheets Required to Print = 1
              Paper Stock Type
              Description
              PLAIN Bond
              ACNTCVR Accent Cover
              BOND3H Bond (3-hole)
              BOOKENV Booklet Envelope
              C1SGLOSS C1S Gloss Finish
              C1SMATTE C1S Matt Finish
              C2SGLOSS C2S Gloss Finish
              C2SMATTE C2S Matt Finish
              CARD Card Stock
              CATLGENV Catalog Envelope
              CATLGENV6 6 Catalog Envelope
              COVERCOLOR Color Cover Copy
              CRCKPEEL Crack N Peel Label
              CUSTOM Custom
              CVRFUTURA Futura Cover
              ENV6x9 Standard 6X9 Envelope
              ENV9X12 Standard 9X12 Envelope
              ETHCERT Ethicon Certificate
              GLOSSCOVER Gloss Cover
              GLOSSTEXT Gloss Text
              HOTSTEXT Hots Text
              INDEX Index
              LABEL80 80 Up Label
              MICROPRT Micro Print
              OFFSET Offset
              PART2 2 Part
              PART3 3 Part
              PART4 4 Part
              PART5 5 Part
              PART6 6 Part
              PERF 12 inch Perfed
              PERMMAT Perm Mat Ad
              PRECUTTAB Pre-Cut Tab
              PREPERF Pre-Perforated
              RECYL Recycled
              SE10ENV 10 Standard Envelope
              SE10ITENV 10 Inside Tint Envelope
              SE9ENV 9 Stanard Envelope
              TAG Tag
              TEXT Text
              TEXTCOLOR Text Color Copy
              TEXTFUTURA Futura Text
              TEXTLASER Text Laser Print
              TRANSPRNCY Transparencies
              VELLUM Vellum
              VELLUM3HP Vellum 3HP
              WE10ENV 10 Window Envelope
              WE9ENV 9 Windor Envelope
              WE9ITENV 9 Inside Tint Window Envelope
              Paper Stock Color
              Black
              Blue
              Buff
              Canary
              Cherry
              Clear
              Cream
              Custom
              Goldrenrod
              Gray
              Green
              Ivory
              Lavender
              Manilla
              NCRPinkCanary
              NCRWhiteBlue
              NCRWhiteBlueCanary
              NCRWhiteCanary
              NCRWhiteCanaryPink
              NCRWhiteCanaryPinkGoldenrod
              NCRWhiteGreen
              NCRWhiteGoldenrodYellow
              NCRWhitePink
              NCRWhiteWhite
              Opaque
              Orange
              Orchid
              Peach
              Pink
              Purple
              Salmon
              Tan
              Violet
              White
              Finished Trim Sizes (listed - width x length)
              11 x 17
              18 x 24 Poster
              24 x 36 Poster
              3 x 5
              36 x 24 Poster
              4 x 6
              475 x 7
              475 x 775
              55 x 85
              6 x 4
              7 x 9
              7385 x 9 (RSI Std)
              85 x 11
              825 x 10875
              825 x 11 (RA product profile std)
              8375 x 10875
              9 x 12
              A4
              A5
              Other - Custom size listed below
              Drilling Locations
              1CENTER
              1LEFTTOP
              1TOPCENTER
              2LEFT
              2LEFT2TOP
              2TOP
              2TOP2LEFT
              2TOP3LEFT
              2TOP5LEFT
              2TOP5RIGHT
              3BOTTOM
              3LEFT
              3LEFT2TOP
              3LEFT3TOP
              3RIGHT
              3TOP
              3TOP5LEFT
              5BOTTOM
              5CENTER
              5LEFT
              5RIGHT
              5RIGHT2TOP
              5TOP
              For TRI fold - select Z or C type Description
              HALF Half
              C C Fold
              DBLEPARLL Double Parallel
              OFFSETZ Offset Z
              SAMPLE See Sample
              SHORT Short Fold
              V V Fold
              Z Z Fold
              Number of Pieces per Poly Wrap
              Publication length Number per Poly Wrap
              77 or more pages 1
              33 to 76 pages 25
              3 to 32 pages 50
              1 or 2 pages 100
              Comments
              CoverText Stock Spine
              100 Gloss Cover If your publication uses a spine make note of that in the comments field Be sure to include the spine as the last page of your PDF Do NOT include that page as part of the publication page count Because the addition of a spine will create an odd page count in the PDF contact a Super User to submit your publication via PDFdirect with an exception tool
              100 Gloss Text
              100 Text
              10pt C1S Cover
              10pt C2S Cover
              10pt C2S Text
              10pt Text Stock
              110 White Index
              12pt C1S Cover
              20 White Opaque Bond
              50 Colored Offset
              50 White Offset
              50 White Opaque
              60 Cover Stock
              60 White Offset
              80 Gloss Cover
              80 Gloss Text
              8pt C1S White
              90 White Index
              CoverText Ink
              Black
              Black + 1 PMS color Type in PMS color
              Black + 2 PMS colors Type in PMS colors
              4 color
              4 color over black
              4 color + 1 PMS color Type in PMS color
              4 color over black + 1 PMS color Type in PMS color
              4 color + 2 PMS colors Type in PMS colors
              4 color + aqueous
              4 color + varnish
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Cannot use quote symbol that is---- Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information White RRD must provide this information NA NA NA NA NA NA 85 11 SIDE NA NA NA NA HALF 85 x 11 50 RRD must provide this information
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B NA PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information GLOSS TEXT 80 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA NA NA NA HALF 85 x 11 RRD must provide this information
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              EA 1 1 See DocMan for the Cost Center selections associated with each Business Group Black amp White B PERFECT PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 2 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA 516 3LEFT NA NA NA NA RRD must provide this information Cover Stock = 90 White IndexText Stock = 20 White Opaque BondCover Ink = BlackText Ink = BlackSpine = If included as last page of PDF
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions EA 1 1 Marketing Commercial Marketing Other November 2008 5 Black amp White B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 4 16 4 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 475 7 SIDE NA NA NA HALF 425 x 7 50 RRD must provide this information Text Stock = 20 White Opaque BondText Ink = Black PN-25192
              Corp 17501
              Bill To 69
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions EA 1 1 Marketing Commercial Marketing Other November 2008 5 Black amp White B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 4 16 4 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 475 7 SIDE NA NA NA HALF 425 x 7 50 RRD must provide this information Text Stock = 20 White Opaque BondText Ink = Black PN-25192
              Details of the Rockwell Automation Print Specifications sheet
              This print specifications sheet is designed with multiple purposes- It is a vehicle to get the most accurate print specifications to RA-approved print vendors- It provides authors with an explanation of all necessary fields to complete before attaching the sheet to your PDF- It provides separate tabs so that an author can fill in all fields related to the publication on the Generic tab or publication-specific template-type tabs to minimize the number of fields an author must completeTo facilitate the most efficient use of this sheet we recommend that you click on the publication-specific tab that most closely fits you publication and use that to complete the print specificationsIMPORTANT Because this sheet was constructed using a sheet that RR Donnelley (RRD) uses to load print specifications there are some columns hidden For example the first field you must complete is Column E or Publication Number Columns A to D are used for RRD purposes and with information only representatives of that RA-approved printer can completeDO NOT delete any hidden columns from the tab you choose to use
              Definitions of Each Tab in Sheet
              Generic pub print specs Single sheet with all required columns for necessary specifications None of the columns are completed All must be completed before attaching the sheet to your PDFThis tab has 39 blank fields you must complete via free text type or pull-down menus
              IN RN pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to installation instructions (IN) and release notes (RN) However you can use this sheet for other publications that are similar to INs and RNsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              UM RM PM pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to user manuals (UM) reference manuals (RM) and programming manuals (PM) However you can use this sheet for other publications that are similar to UMs RMs and PMsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              AP PP pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to application solutions (AP) and product profiles (PP) However you can use this sheet for other publications that are similar to APs and PPsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              BR pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to brochures (BR) However you can use this sheet for other publications that are similar to BRsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              Field definitions Description of information fields used throughout the spreadsheet tabs that may not be immediately obvious to a user
              Attach Print Specs to PDF
              For Acrobat 80 follow these steps1 Open the PDF2 Click on DocumentgtAttach A File A new section appears at the bottom of the PDF3 Browse to the MS Excel file with the print specs and add it to the PDFFor Acrobat 70 follow these steps1 Open the PDF2 Click on the Attachments tab next to the publications bookmarks A new section appears at the bottom of the PDF3 Click on the Add button in the bottom section of the PDF4 Browse to the MS Excel file with the print specs and add it to the PDFFor Acrobat 60 follow these steps1 Open the PDF2 Go to the backcover of the PDF3 Click on the Tools pull-down menu4 Click on this sequence of menu options - Advanced Commenting Attach Attach File Tool A paper clip appears5 Click to put the paper clip somewhere on the backcover The browse window appears6 Browse to the MS Excel file with the print specs and add it to the PDFIMPORTANT If you are using Acrobat 50 or earlier please upgrade
              RA-QR005C-EN-E 608
Page 7: USB-to-ControlNet Cable - Rockwell Automationliterature.rockwellautomation.com/idc/groups/literature/documents/... · USB-to-ControlNet Cable Catalog Number 1784-U2CN Topic Page Important

USB-to-ControlNet Cable 7

3 Insert the end of the cable having the RJ45 network connector into the ControlNet network access port (NAP) of a ControlNet network-enabled device

Traffic Analyzer Software

The 1784-U2CN cable is designed to work with Frontlinersquos NetDecoder traffic analyzer software For more information on Frontlinersquos product go to either httpwwwrockwellautomationcomencompass or httpwwwftecom

USB Cable

RJ45 ControlNet Network Connector

Publication 1784-IN047A-EN-P - November 2008

8 USB-to-ControlNet Cable

Product Dimensions

The following illustration shows the product dimensions

USB Cable Length 061 m (2 ft)

Enclosure Length 762 cm (3 in) Width 508 cm (2 in) Thickness 254 cm (1 in)

ControlNet NAP Cable Length 305 m (10 ft)

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 9

Status IndicatorsThe following table describes the cable status indicators

Indicator Status Description

USB Green The cable is configured but no network traffic is present

Flashing green Network traffic is present

Off Unable to transfer data

bull Disconnected from host

bull In one of the following states

ndash default

ndash powered

ndash address

ndash suspend

USB

ControlNet Network Status

Module Status

Publication 1784-IN047A-EN-P - November 2008

10 USB-to-ControlNet Cable

Module Status (MS) Green The cable is operating normally

Off No power to the cable

Flashing green The cable is operating in a normal condition and is online with no connections established

bull The cable may be in Standby mode

bull The cable needs commissioning due to missing incomplete or incorrect configuration

Flashing red The cable has a recoverable fault

Red The cable has an unrecoverable fault and may need to be replaced

Flashing redgreen

The cable is performing a self-test

ControlNet Network Status (NS)

Off Not on network

Red Network interface faulted

Flashing redgreen

Invalid network configuration (for example a MAC ID above UMAX)

Flashing red bull Duplicate node detected

bull Link fault

bull No MAC frames received

Flashing green bull Temporary channel error

bull Listen only

Green Normal operation MAC frame received without error

Indicator Status Description

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 11

Specifications

USB-to-ControlNet Cable Catalog Number 1784-U2CN

Attribute Value

Enclosure type rating Meets IP30

Power dissipation max 05 W

Supply voltage 500V DC 525V DC max

Supply current 75 mA

Power consumption max 05 W

Isolation voltage 30V continuous Basic Insulation Type Type tested at 500V AC for 60 s ControlNet to USB

Wiring category(1)

(1) Use this Conductor Category information for planning conductor routing Refer to Industrial Automation Wiring and Grounding Guidelines publication 1770-41

2 - on communication ports

ControlNet current value 70 mA 24V

Publication 1784-IN047A-EN-P - November 2008

12 USB-to-ControlNet Cable

Environmental Specifications

Attribute Value

Temperature operating

IEC 60068-2-1 (Test Ad Operating Cold) IEC 60068-2-2 (Test Bd Operating Dry Heat) IEC 60068-2-14 (Test Nb Operating Thermal Shock) 0hellip55 degC (32hellip131 degF)

Temperature nonoperating

IEC 60068-2-1 (Test Ab Unpackaged Nonoperating Cold) IEC 60068-2-2 (Test Bb Unpackaged Nonoperating Dry Heat) IEC 60068-2-14 (Test Na Unpackaged Nonoperating Thermal Shock) -10hellip85 degC (14hellip185 degF)

Relative humidity IEC 60068-2-30 (Test Db Unpackaged Damp Heat) 5hellip95 noncondensing

Nonoperating shock IEC 60068-2-27 (Test Ea Unpackaged Shock) 1000 mm (328 ft)

Emissions CISPR 11 Group 1 Class A

ESD immunity IEC 61000-4-2 8 kV air discharges

Radiated RF immunity IEC 61000-4-3 10Vm with 1 kHz sine-wave 80 AM from 80hellip2000 MHz 10Vm with 200 Hz 50 Pulse 100 AM at 900 MHz 10Vm with 200 Hz 50 Pulse 100 AM at 1890 MHz 10Vm with 1 kHz sine-wave 80 AM from 2000hellip2700 MHz

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 13

Certifications

Certifications (when product is marked)(1)

Value

c-UL-us UL Listed Industrial Control Equipment certified for US and Canada See UL File E65584

CE European Union 2004108EC EMC Directive compliant with EN 61326-1 MeasControlLab Industrial Requirements EN 61000-6-2 Industrial Immunity EN 61000-6-4 Industrial Emissions EN 61131-2 Programmable Controllers (Clause 8 Zone A amp B)

C-Tick Australian Radiocommunications Act compliant with ASNZS CISPR 11 Industrial Emissions

CI ControlNet International conformance tested to ControlNet specifications

(1) See the Product Certification link at httpwwwabcom for Declarations of Conformity Certificates and other certification details

Publication 1784-IN047A-EN-P - November 2008

14 USB-to-ControlNet Cable

Additional ResourcesThese documents contain additional information concerning related Rockwell Automation products

Resource Description

ControlNet Coax Media Planning and Installation Guide publication CNET-IN002

Provides ControlNet network planning information

Industrial Automation Wiring and Grounding Guidelines publication 1770-41

Provides general guidelines for installing a Rockwell Automation industrial system

Product Certifications website httpwwwabcom

Provides declarations of conformity certificates and other certification details

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 15

Notes

Publication 1784-IN047A-EN-P - November 2008

Rockwell Automation SupportRockwell Automation provides technical information on the Web to assist you in using its products At httpsupportrockwellautomationcom you can find technical manuals a knowledge base of FAQs technical and application notes sample code and links to software service packs and a MySupport feature that you can customize to make the best use of these tools

For an additional level of technical phone support for installation configuration and troubleshooting we offer TechConnect support programs For more information contact your local distributor or Rockwell Automation representative or visit httpsupportrockwellautomationcom

Installation Assistance

If you experience a problem within the first 24 hours of installation please review the information thats contained in this manual You can also contact a special Customer Support number for initial help in getting your product up and running

New Product Satisfaction Return

Rockwell Automation tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility However if your product is not functioning and needs to be returned follow these procedures

Allen-Bradley Data Highway Plus DH+ PLC-5 RSLinx Rockwell Automation SLC and TechConnect are trademarks of Rockwell Automation Inc

Trademarks not belonging to Rockwell Automation are property of their respective companies

United States 14406463434 Monday ndash Friday 8 am ndash 5 pm EST

Outside United States Please contact your local Rockwell Automation representative for any technical support issues

United States Contact your distributor You must provide a Customer Support case number (see phone number above to obtain one) to your distributor in order to complete the return process

Outside United States Please contact your local Rockwell Automation representative for the return procedure

Publication 1784-IN047A-EN-P - November 2008 PN-25192Copyright copy 2008 Rockwell Automation Inc All rights reserved Printed in the USA

  • Publication 1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions
    • Important User Information
    • Environment and Enclosure
    • About the Cable
    • Install the Cable
      • Obtain the Device Driver for the Cable
      • Configure and Connect the Cable
      • Traffic Analyzer Software
      • Product Dimensions
        • Status Indicators
        • Specifications
        • Additional Resources
        • Back Cover

            • ltlt ASCII85EncodePages false AllowTransparency false AutoPositionEPSFiles false AutoRotatePages None Binding Left CalGrayProfile (Gray Gamma 22) CalRGBProfile (sRGB IEC61966-21) CalCMYKProfile (Euroscale Uncoated v2) sRGBProfile (sRGB IEC61966-21) CannotEmbedFontPolicy Error CompatibilityLevel 14 CompressObjects Tags CompressPages true ConvertImagesToIndexed true PassThroughJPEGImages true CreateJDFFile false CreateJobTicket true DefaultRenderingIntent Default DetectBlends true DetectCurves 00000 ColorConversionStrategy LeaveColorUnchanged DoThumbnails false EmbedAllFonts true EmbedOpenType false ParseICCProfilesInComments true EmbedJobOptions true DSCReportingLevel 0 EmitDSCWarnings false EndPage -1 ImageMemory 1048576 LockDistillerParams true MaxSubsetPct 99 Optimize true OPM 1 ParseDSCComments false ParseDSCCommentsForDocInfo false PreserveCopyPage true PreserveDICMYKValues true PreserveEPSInfo false PreserveFlatness true PreserveHalftoneInfo true PreserveOPIComments false PreserveOverprintSettings true StartPage 1 SubsetFonts false TransferFunctionInfo Apply UCRandBGInfo Preserve UsePrologue false ColorSettingsFile (None) AlwaysEmbed [ true ArialMT ] NeverEmbed [ true ] AntiAliasColorImages false CropColorImages true ColorImageMinResolution 150 ColorImageMinResolutionPolicy OK DownsampleColorImages true ColorImageDownsampleType Bicubic ColorImageResolution 150 ColorImageDepth 8 ColorImageMinDownsampleDepth 1 ColorImageDownsampleThreshold 100000 EncodeColorImages true ColorImageFilter FlateEncode AutoFilterColorImages false ColorImageAutoFilterStrategy JPEG ColorACSImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt ColorImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt JPEG2000ColorACSImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt JPEG2000ColorImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt AntiAliasGrayImages false CropGrayImages true GrayImageMinResolution 150 GrayImageMinResolutionPolicy OK DownsampleGrayImages true GrayImageDownsampleType Bicubic GrayImageResolution 150 GrayImageDepth 8 GrayImageMinDownsampleDepth 2 GrayImageDownsampleThreshold 100000 EncodeGrayImages true GrayImageFilter FlateEncode AutoFilterGrayImages false GrayImageAutoFilterStrategy JPEG GrayACSImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt GrayImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt JPEG2000GrayACSImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt JPEG2000GrayImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt AntiAliasMonoImages false CropMonoImages true MonoImageMinResolution 900 MonoImageMinResolutionPolicy OK DownsampleMonoImages true MonoImageDownsampleType Bicubic MonoImageResolution 900 MonoImageDepth -1 MonoImageDownsampleThreshold 100000 EncodeMonoImages true MonoImageFilter CCITTFaxEncode MonoImageDict ltlt K -1 gtgt AllowPSXObjects true CheckCompliance [ None ] PDFX1aCheck false PDFX3Check false PDFXCompliantPDFOnly false PDFXNoTrimBoxError true PDFXTrimBoxToMediaBoxOffset [ 000000 000000 000000 000000 ] PDFXSetBleedBoxToMediaBox true PDFXBleedBoxToTrimBoxOffset [ 000000 000000 000000 000000 ] PDFXOutputIntentProfile (None) PDFXOutputConditionIdentifier () PDFXOutputCondition () PDFXRegistryName (httpwwwcolororg) PDFXTrapped False SyntheticBoldness 1000000 Description ltlt JPN ltFEFF3053306e8a2d5b9a306f300130d330b830cd30b9658766f8306e8868793a304a3088307353705237306b90693057305f00200050004400460020658766f830924f5c62103059308b3068304d306b4f7f75283057307e305930023053306e8a2d5b9a30674f5c62103057305f00200050004400460020658766f8306f0020004100630072006f0062006100740020304a30883073002000520065006100640065007200200035002e003000204ee5964d30678868793a3067304d307e30593002gt DEU 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 FRA 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 PTB 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 DAN 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 NLD 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 ESP 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 SUO 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 ITA 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 NOR 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 SVE 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 ENU (Rockwell Job Options for Web-only PDF Files) gtgtgtgt setdistillerparamsltlt HWResolution [2540 2540] PageSize [792000 1224000]gtgt setpagedevice

              Intro

              ampLRA-QR005B-EN-E 308

              Generic pub print specs

              ampCItem Setup Sheet for Conversion Transfers
              ampLJIT-D-print SpreadsheetampCRA-QR005C-EN-EampRampD ampT

              IN RN pub type specs

              UM RM PM pub type specs

              AP PP pub type specs

              BR pub type specs

              Field definitions

              ampL04032006ampRampP
              PackagingOrdering Unit Of Measure
              EA = Each
              PK = Pack
              PD = Pad
              RL = Roll
              BK = Book
              CT = Carton
              BX = Box
              ST = Set
              Multiple Order Qty
              Separate methods of ordering same item For example if an item is packaged 50 per pad 5 pads per carton You can set the order qty as 50 each (one pad) or 250 each (1 ctn)
              Business Group
              The business group that the publication supports Your choice here determines the list you choose from for Cost Center
              CorporateBusiness Development
              Finance
              Human Resources
              IT
              Logistics
              Manufacturing
              Marketing Commercial
              Marketing Europe
              Marketing Other
              Operations
              Order Services
              Other
              Process Improvement
              Procurement
              Quality
              Sales
              Max Order Quantity
              Presale items = 100
              Postsale items = 5
              NOTE You can use other quantities but the delivery may take a bit longer because a system admin must approve it
              Item Category - Form (F) or Book (B)
              Form (F) = Any publication that is a single sheet (ie 1 or 2 pages) an envelope or carbonless form
              Book (B) = Any publication that contains 3 or more pages
              BindingStitching
              For a Form (F) use
              CARBONLESS
              CUTSHEET
              ENVELOPE
              For a Book (B) use
              LOOSE LOOSE -Loose Leaf
              PERFECT PERFECT - Perfect Bound
              PLASTCOIL PLASTCOIL - Plastic Coil (Coil Bound)
              SADDLE SADDLE - Saddle Stitch
              STAPLED1 STAPLED1 -1 position
              STAPLED1B STAPLED1B - bottom 1 position
              STAPLED2 STAPLED2 - 2 positions
              THERMAL THERMAL - Thermal bound (Tape bound)
              THERMALO THERMALO - Thermal Bound (Tape bound - offline)
              WIRE O Wire O - Double Wire Bound (offline)
              Saddle-Stitch Items
              20 sheets max on 20 (text and cover)
              19 sheets max on 20 (text) and 24 (cover)
              18 sheets max on 24 (text and cover)
              All page quantities must be divisible by 4
              Tape Bound Items
              125 sheets max on 20 no cover
              120 sheets max wcover (90 index unless indicated otherwise)
              Perfect Bound Items
              475 sheets max on 20 no cover
              470 sheets max wcover (90 index unless indicated otherwise)
              Double Wire Bound Items
              40 sheets max on 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
              Coil Bound Items
              290 sheets max of 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
              Sides Printed
              Head2Head = Most common Double-sided printing with headers on both pages lining up at the top of the page
              Simplex = Single-sided printing
              Head2Toe = Least common Double-sided printing with header on one page lining up with the footer on the other page
              Number of Forms to a Sheet
              Number of publication pages printed on a sheet of paper at the printerFor example if a 4-page 85 x 11 publication is printed on the front and back sides of an 11 x 17 sheet of paper that is folded in half the Number of Forms to a Sheet = 4Example 2 If a 4-page 55 x 85 publication is printed on the front and back sides of an 85 x 11 sheet of paper that is folded in half the Number of forms to a Sheet = 4
              Number of Sheets Required to Print
              Number of sheets of paper required to print the publicationFor example if a 16-page 85 x 11 publication is printed on the front and back sides of four 11 x 17 sheets of paper that are folded in half and saddle stitched together the Number of Sheets Required to Print = 4Example 4 If a 4-page 55 x 85 publication is printed on the front and back sides of one 85 x 11 sheet of paper that is folded in half the Number of Sheets Required to Print = 1
              Paper Stock Type
              Description
              PLAIN Bond
              ACNTCVR Accent Cover
              BOND3H Bond (3-hole)
              BOOKENV Booklet Envelope
              C1SGLOSS C1S Gloss Finish
              C1SMATTE C1S Matt Finish
              C2SGLOSS C2S Gloss Finish
              C2SMATTE C2S Matt Finish
              CARD Card Stock
              CATLGENV Catalog Envelope
              CATLGENV6 6 Catalog Envelope
              COVERCOLOR Color Cover Copy
              CRCKPEEL Crack N Peel Label
              CUSTOM Custom
              CVRFUTURA Futura Cover
              ENV6x9 Standard 6X9 Envelope
              ENV9X12 Standard 9X12 Envelope
              ETHCERT Ethicon Certificate
              GLOSSCOVER Gloss Cover
              GLOSSTEXT Gloss Text
              HOTSTEXT Hots Text
              INDEX Index
              LABEL80 80 Up Label
              MICROPRT Micro Print
              OFFSET Offset
              PART2 2 Part
              PART3 3 Part
              PART4 4 Part
              PART5 5 Part
              PART6 6 Part
              PERF 12 inch Perfed
              PERMMAT Perm Mat Ad
              PRECUTTAB Pre-Cut Tab
              PREPERF Pre-Perforated
              RECYL Recycled
              SE10ENV 10 Standard Envelope
              SE10ITENV 10 Inside Tint Envelope
              SE9ENV 9 Stanard Envelope
              TAG Tag
              TEXT Text
              TEXTCOLOR Text Color Copy
              TEXTFUTURA Futura Text
              TEXTLASER Text Laser Print
              TRANSPRNCY Transparencies
              VELLUM Vellum
              VELLUM3HP Vellum 3HP
              WE10ENV 10 Window Envelope
              WE9ENV 9 Windor Envelope
              WE9ITENV 9 Inside Tint Window Envelope
              Paper Stock Color
              Black
              Blue
              Buff
              Canary
              Cherry
              Clear
              Cream
              Custom
              Goldrenrod
              Gray
              Green
              Ivory
              Lavender
              Manilla
              NCRPinkCanary
              NCRWhiteBlue
              NCRWhiteBlueCanary
              NCRWhiteCanary
              NCRWhiteCanaryPink
              NCRWhiteCanaryPinkGoldenrod
              NCRWhiteGreen
              NCRWhiteGoldenrodYellow
              NCRWhitePink
              NCRWhiteWhite
              Opaque
              Orange
              Orchid
              Peach
              Pink
              Purple
              Salmon
              Tan
              Violet
              White
              Finished Trim Sizes (listed - width x length)
              11 x 17
              18 x 24 Poster
              24 x 36 Poster
              3 x 5
              36 x 24 Poster
              4 x 6
              475 x 7
              475 x 775
              55 x 85
              6 x 4
              7 x 9
              7385 x 9 (RSI Std)
              85 x 11
              825 x 10875
              825 x 11 (RA product profile std)
              8375 x 10875
              9 x 12
              A4
              A5
              Other - Custom size listed below
              Drilling Locations
              1CENTER
              1LEFTTOP
              1TOPCENTER
              2LEFT
              2LEFT2TOP
              2TOP
              2TOP2LEFT
              2TOP3LEFT
              2TOP5LEFT
              2TOP5RIGHT
              3BOTTOM
              3LEFT
              3LEFT2TOP
              3LEFT3TOP
              3RIGHT
              3TOP
              3TOP5LEFT
              5BOTTOM
              5CENTER
              5LEFT
              5RIGHT
              5RIGHT2TOP
              5TOP
              For TRI fold - select Z or C type Description
              HALF Half
              C C Fold
              DBLEPARLL Double Parallel
              OFFSETZ Offset Z
              SAMPLE See Sample
              SHORT Short Fold
              V V Fold
              Z Z Fold
              Number of Pieces per Poly Wrap
              Publication length Number per Poly Wrap
              77 or more pages 1
              33 to 76 pages 25
              3 to 32 pages 50
              1 or 2 pages 100
              Comments
              CoverText Stock Spine
              100 Gloss Cover If your publication uses a spine make note of that in the comments field Be sure to include the spine as the last page of your PDF Do NOT include that page as part of the publication page count Because the addition of a spine will create an odd page count in the PDF contact a Super User to submit your publication via PDFdirect with an exception tool
              100 Gloss Text
              100 Text
              10pt C1S Cover
              10pt C2S Cover
              10pt C2S Text
              10pt Text Stock
              110 White Index
              12pt C1S Cover
              20 White Opaque Bond
              50 Colored Offset
              50 White Offset
              50 White Opaque
              60 Cover Stock
              60 White Offset
              80 Gloss Cover
              80 Gloss Text
              8pt C1S White
              90 White Index
              CoverText Ink
              Black
              Black + 1 PMS color Type in PMS color
              Black + 2 PMS colors Type in PMS colors
              4 color
              4 color over black
              4 color + 1 PMS color Type in PMS color
              4 color over black + 1 PMS color Type in PMS color
              4 color + 2 PMS colors Type in PMS colors
              4 color + aqueous
              4 color + varnish
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Cannot use quote symbol that is---- Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information White RRD must provide this information NA NA NA NA NA NA 85 11 SIDE NA NA NA NA HALF 85 x 11 50 RRD must provide this information
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B NA PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information GLOSS TEXT 80 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA NA NA NA HALF 85 x 11 RRD must provide this information
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              EA 1 1 See DocMan for the Cost Center selections associated with each Business Group Black amp White B PERFECT PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 2 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA 516 3LEFT NA NA NA NA RRD must provide this information Cover Stock = 90 White IndexText Stock = 20 White Opaque BondCover Ink = BlackText Ink = BlackSpine = If included as last page of PDF
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions EA 1 1 Marketing Commercial Marketing Other November 2008 5 Black amp White B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 4 16 4 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 475 7 SIDE NA NA NA HALF 425 x 7 50 RRD must provide this information Text Stock = 20 White Opaque BondText Ink = Black PN-25192
              Corp 17501
              Bill To 69
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions EA 1 1 Marketing Commercial Marketing Other November 2008 5 Black amp White B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 4 16 4 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 475 7 SIDE NA NA NA HALF 425 x 7 50 RRD must provide this information Text Stock = 20 White Opaque BondText Ink = Black PN-25192
              Details of the Rockwell Automation Print Specifications sheet
              This print specifications sheet is designed with multiple purposes- It is a vehicle to get the most accurate print specifications to RA-approved print vendors- It provides authors with an explanation of all necessary fields to complete before attaching the sheet to your PDF- It provides separate tabs so that an author can fill in all fields related to the publication on the Generic tab or publication-specific template-type tabs to minimize the number of fields an author must completeTo facilitate the most efficient use of this sheet we recommend that you click on the publication-specific tab that most closely fits you publication and use that to complete the print specificationsIMPORTANT Because this sheet was constructed using a sheet that RR Donnelley (RRD) uses to load print specifications there are some columns hidden For example the first field you must complete is Column E or Publication Number Columns A to D are used for RRD purposes and with information only representatives of that RA-approved printer can completeDO NOT delete any hidden columns from the tab you choose to use
              Definitions of Each Tab in Sheet
              Generic pub print specs Single sheet with all required columns for necessary specifications None of the columns are completed All must be completed before attaching the sheet to your PDFThis tab has 39 blank fields you must complete via free text type or pull-down menus
              IN RN pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to installation instructions (IN) and release notes (RN) However you can use this sheet for other publications that are similar to INs and RNsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              UM RM PM pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to user manuals (UM) reference manuals (RM) and programming manuals (PM) However you can use this sheet for other publications that are similar to UMs RMs and PMsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              AP PP pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to application solutions (AP) and product profiles (PP) However you can use this sheet for other publications that are similar to APs and PPsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              BR pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to brochures (BR) However you can use this sheet for other publications that are similar to BRsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              Field definitions Description of information fields used throughout the spreadsheet tabs that may not be immediately obvious to a user
              Attach Print Specs to PDF
              For Acrobat 80 follow these steps1 Open the PDF2 Click on DocumentgtAttach A File A new section appears at the bottom of the PDF3 Browse to the MS Excel file with the print specs and add it to the PDFFor Acrobat 70 follow these steps1 Open the PDF2 Click on the Attachments tab next to the publications bookmarks A new section appears at the bottom of the PDF3 Click on the Add button in the bottom section of the PDF4 Browse to the MS Excel file with the print specs and add it to the PDFFor Acrobat 60 follow these steps1 Open the PDF2 Go to the backcover of the PDF3 Click on the Tools pull-down menu4 Click on this sequence of menu options - Advanced Commenting Attach Attach File Tool A paper clip appears5 Click to put the paper clip somewhere on the backcover The browse window appears6 Browse to the MS Excel file with the print specs and add it to the PDFIMPORTANT If you are using Acrobat 50 or earlier please upgrade
              RA-QR005C-EN-E 608
Page 8: USB-to-ControlNet Cable - Rockwell Automationliterature.rockwellautomation.com/idc/groups/literature/documents/... · USB-to-ControlNet Cable Catalog Number 1784-U2CN Topic Page Important

8 USB-to-ControlNet Cable

Product Dimensions

The following illustration shows the product dimensions

USB Cable Length 061 m (2 ft)

Enclosure Length 762 cm (3 in) Width 508 cm (2 in) Thickness 254 cm (1 in)

ControlNet NAP Cable Length 305 m (10 ft)

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 9

Status IndicatorsThe following table describes the cable status indicators

Indicator Status Description

USB Green The cable is configured but no network traffic is present

Flashing green Network traffic is present

Off Unable to transfer data

bull Disconnected from host

bull In one of the following states

ndash default

ndash powered

ndash address

ndash suspend

USB

ControlNet Network Status

Module Status

Publication 1784-IN047A-EN-P - November 2008

10 USB-to-ControlNet Cable

Module Status (MS) Green The cable is operating normally

Off No power to the cable

Flashing green The cable is operating in a normal condition and is online with no connections established

bull The cable may be in Standby mode

bull The cable needs commissioning due to missing incomplete or incorrect configuration

Flashing red The cable has a recoverable fault

Red The cable has an unrecoverable fault and may need to be replaced

Flashing redgreen

The cable is performing a self-test

ControlNet Network Status (NS)

Off Not on network

Red Network interface faulted

Flashing redgreen

Invalid network configuration (for example a MAC ID above UMAX)

Flashing red bull Duplicate node detected

bull Link fault

bull No MAC frames received

Flashing green bull Temporary channel error

bull Listen only

Green Normal operation MAC frame received without error

Indicator Status Description

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 11

Specifications

USB-to-ControlNet Cable Catalog Number 1784-U2CN

Attribute Value

Enclosure type rating Meets IP30

Power dissipation max 05 W

Supply voltage 500V DC 525V DC max

Supply current 75 mA

Power consumption max 05 W

Isolation voltage 30V continuous Basic Insulation Type Type tested at 500V AC for 60 s ControlNet to USB

Wiring category(1)

(1) Use this Conductor Category information for planning conductor routing Refer to Industrial Automation Wiring and Grounding Guidelines publication 1770-41

2 - on communication ports

ControlNet current value 70 mA 24V

Publication 1784-IN047A-EN-P - November 2008

12 USB-to-ControlNet Cable

Environmental Specifications

Attribute Value

Temperature operating

IEC 60068-2-1 (Test Ad Operating Cold) IEC 60068-2-2 (Test Bd Operating Dry Heat) IEC 60068-2-14 (Test Nb Operating Thermal Shock) 0hellip55 degC (32hellip131 degF)

Temperature nonoperating

IEC 60068-2-1 (Test Ab Unpackaged Nonoperating Cold) IEC 60068-2-2 (Test Bb Unpackaged Nonoperating Dry Heat) IEC 60068-2-14 (Test Na Unpackaged Nonoperating Thermal Shock) -10hellip85 degC (14hellip185 degF)

Relative humidity IEC 60068-2-30 (Test Db Unpackaged Damp Heat) 5hellip95 noncondensing

Nonoperating shock IEC 60068-2-27 (Test Ea Unpackaged Shock) 1000 mm (328 ft)

Emissions CISPR 11 Group 1 Class A

ESD immunity IEC 61000-4-2 8 kV air discharges

Radiated RF immunity IEC 61000-4-3 10Vm with 1 kHz sine-wave 80 AM from 80hellip2000 MHz 10Vm with 200 Hz 50 Pulse 100 AM at 900 MHz 10Vm with 200 Hz 50 Pulse 100 AM at 1890 MHz 10Vm with 1 kHz sine-wave 80 AM from 2000hellip2700 MHz

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 13

Certifications

Certifications (when product is marked)(1)

Value

c-UL-us UL Listed Industrial Control Equipment certified for US and Canada See UL File E65584

CE European Union 2004108EC EMC Directive compliant with EN 61326-1 MeasControlLab Industrial Requirements EN 61000-6-2 Industrial Immunity EN 61000-6-4 Industrial Emissions EN 61131-2 Programmable Controllers (Clause 8 Zone A amp B)

C-Tick Australian Radiocommunications Act compliant with ASNZS CISPR 11 Industrial Emissions

CI ControlNet International conformance tested to ControlNet specifications

(1) See the Product Certification link at httpwwwabcom for Declarations of Conformity Certificates and other certification details

Publication 1784-IN047A-EN-P - November 2008

14 USB-to-ControlNet Cable

Additional ResourcesThese documents contain additional information concerning related Rockwell Automation products

Resource Description

ControlNet Coax Media Planning and Installation Guide publication CNET-IN002

Provides ControlNet network planning information

Industrial Automation Wiring and Grounding Guidelines publication 1770-41

Provides general guidelines for installing a Rockwell Automation industrial system

Product Certifications website httpwwwabcom

Provides declarations of conformity certificates and other certification details

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 15

Notes

Publication 1784-IN047A-EN-P - November 2008

Rockwell Automation SupportRockwell Automation provides technical information on the Web to assist you in using its products At httpsupportrockwellautomationcom you can find technical manuals a knowledge base of FAQs technical and application notes sample code and links to software service packs and a MySupport feature that you can customize to make the best use of these tools

For an additional level of technical phone support for installation configuration and troubleshooting we offer TechConnect support programs For more information contact your local distributor or Rockwell Automation representative or visit httpsupportrockwellautomationcom

Installation Assistance

If you experience a problem within the first 24 hours of installation please review the information thats contained in this manual You can also contact a special Customer Support number for initial help in getting your product up and running

New Product Satisfaction Return

Rockwell Automation tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility However if your product is not functioning and needs to be returned follow these procedures

Allen-Bradley Data Highway Plus DH+ PLC-5 RSLinx Rockwell Automation SLC and TechConnect are trademarks of Rockwell Automation Inc

Trademarks not belonging to Rockwell Automation are property of their respective companies

United States 14406463434 Monday ndash Friday 8 am ndash 5 pm EST

Outside United States Please contact your local Rockwell Automation representative for any technical support issues

United States Contact your distributor You must provide a Customer Support case number (see phone number above to obtain one) to your distributor in order to complete the return process

Outside United States Please contact your local Rockwell Automation representative for the return procedure

Publication 1784-IN047A-EN-P - November 2008 PN-25192Copyright copy 2008 Rockwell Automation Inc All rights reserved Printed in the USA

  • Publication 1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions
    • Important User Information
    • Environment and Enclosure
    • About the Cable
    • Install the Cable
      • Obtain the Device Driver for the Cable
      • Configure and Connect the Cable
      • Traffic Analyzer Software
      • Product Dimensions
        • Status Indicators
        • Specifications
        • Additional Resources
        • Back Cover

            • ltlt ASCII85EncodePages false AllowTransparency false AutoPositionEPSFiles false AutoRotatePages None Binding Left CalGrayProfile (Gray Gamma 22) CalRGBProfile (sRGB IEC61966-21) CalCMYKProfile (Euroscale Uncoated v2) sRGBProfile (sRGB IEC61966-21) CannotEmbedFontPolicy Error CompatibilityLevel 14 CompressObjects Tags CompressPages true ConvertImagesToIndexed true PassThroughJPEGImages true CreateJDFFile false CreateJobTicket true DefaultRenderingIntent Default DetectBlends true DetectCurves 00000 ColorConversionStrategy LeaveColorUnchanged DoThumbnails false EmbedAllFonts true EmbedOpenType false ParseICCProfilesInComments true EmbedJobOptions true DSCReportingLevel 0 EmitDSCWarnings false EndPage -1 ImageMemory 1048576 LockDistillerParams true MaxSubsetPct 99 Optimize true OPM 1 ParseDSCComments false ParseDSCCommentsForDocInfo false PreserveCopyPage true PreserveDICMYKValues true PreserveEPSInfo false PreserveFlatness true PreserveHalftoneInfo true PreserveOPIComments false PreserveOverprintSettings true StartPage 1 SubsetFonts false TransferFunctionInfo Apply UCRandBGInfo Preserve UsePrologue false ColorSettingsFile (None) AlwaysEmbed [ true ArialMT ] NeverEmbed [ true ] AntiAliasColorImages false CropColorImages true ColorImageMinResolution 150 ColorImageMinResolutionPolicy OK DownsampleColorImages true ColorImageDownsampleType Bicubic ColorImageResolution 150 ColorImageDepth 8 ColorImageMinDownsampleDepth 1 ColorImageDownsampleThreshold 100000 EncodeColorImages true ColorImageFilter FlateEncode AutoFilterColorImages false ColorImageAutoFilterStrategy JPEG ColorACSImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt ColorImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt JPEG2000ColorACSImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt JPEG2000ColorImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt AntiAliasGrayImages false CropGrayImages true GrayImageMinResolution 150 GrayImageMinResolutionPolicy OK DownsampleGrayImages true GrayImageDownsampleType Bicubic GrayImageResolution 150 GrayImageDepth 8 GrayImageMinDownsampleDepth 2 GrayImageDownsampleThreshold 100000 EncodeGrayImages true GrayImageFilter FlateEncode AutoFilterGrayImages false GrayImageAutoFilterStrategy JPEG GrayACSImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt GrayImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt JPEG2000GrayACSImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt JPEG2000GrayImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt AntiAliasMonoImages false CropMonoImages true MonoImageMinResolution 900 MonoImageMinResolutionPolicy OK DownsampleMonoImages true MonoImageDownsampleType Bicubic MonoImageResolution 900 MonoImageDepth -1 MonoImageDownsampleThreshold 100000 EncodeMonoImages true MonoImageFilter CCITTFaxEncode MonoImageDict ltlt K -1 gtgt AllowPSXObjects true CheckCompliance [ None ] PDFX1aCheck false PDFX3Check false PDFXCompliantPDFOnly false PDFXNoTrimBoxError true PDFXTrimBoxToMediaBoxOffset [ 000000 000000 000000 000000 ] PDFXSetBleedBoxToMediaBox true PDFXBleedBoxToTrimBoxOffset [ 000000 000000 000000 000000 ] PDFXOutputIntentProfile (None) PDFXOutputConditionIdentifier () PDFXOutputCondition () PDFXRegistryName (httpwwwcolororg) PDFXTrapped False SyntheticBoldness 1000000 Description ltlt JPN ltFEFF3053306e8a2d5b9a306f300130d330b830cd30b9658766f8306e8868793a304a3088307353705237306b90693057305f00200050004400460020658766f830924f5c62103059308b3068304d306b4f7f75283057307e305930023053306e8a2d5b9a30674f5c62103057305f00200050004400460020658766f8306f0020004100630072006f0062006100740020304a30883073002000520065006100640065007200200035002e003000204ee5964d30678868793a3067304d307e30593002gt DEU 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 FRA 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 PTB 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 DAN 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 NLD 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 ESP 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 SUO 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 ITA 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 NOR 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 SVE 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 ENU (Rockwell Job Options for Web-only PDF Files) gtgtgtgt setdistillerparamsltlt HWResolution [2540 2540] PageSize [792000 1224000]gtgt setpagedevice

              Intro

              ampLRA-QR005B-EN-E 308

              Generic pub print specs

              ampCItem Setup Sheet for Conversion Transfers
              ampLJIT-D-print SpreadsheetampCRA-QR005C-EN-EampRampD ampT

              IN RN pub type specs

              UM RM PM pub type specs

              AP PP pub type specs

              BR pub type specs

              Field definitions

              ampL04032006ampRampP
              PackagingOrdering Unit Of Measure
              EA = Each
              PK = Pack
              PD = Pad
              RL = Roll
              BK = Book
              CT = Carton
              BX = Box
              ST = Set
              Multiple Order Qty
              Separate methods of ordering same item For example if an item is packaged 50 per pad 5 pads per carton You can set the order qty as 50 each (one pad) or 250 each (1 ctn)
              Business Group
              The business group that the publication supports Your choice here determines the list you choose from for Cost Center
              CorporateBusiness Development
              Finance
              Human Resources
              IT
              Logistics
              Manufacturing
              Marketing Commercial
              Marketing Europe
              Marketing Other
              Operations
              Order Services
              Other
              Process Improvement
              Procurement
              Quality
              Sales
              Max Order Quantity
              Presale items = 100
              Postsale items = 5
              NOTE You can use other quantities but the delivery may take a bit longer because a system admin must approve it
              Item Category - Form (F) or Book (B)
              Form (F) = Any publication that is a single sheet (ie 1 or 2 pages) an envelope or carbonless form
              Book (B) = Any publication that contains 3 or more pages
              BindingStitching
              For a Form (F) use
              CARBONLESS
              CUTSHEET
              ENVELOPE
              For a Book (B) use
              LOOSE LOOSE -Loose Leaf
              PERFECT PERFECT - Perfect Bound
              PLASTCOIL PLASTCOIL - Plastic Coil (Coil Bound)
              SADDLE SADDLE - Saddle Stitch
              STAPLED1 STAPLED1 -1 position
              STAPLED1B STAPLED1B - bottom 1 position
              STAPLED2 STAPLED2 - 2 positions
              THERMAL THERMAL - Thermal bound (Tape bound)
              THERMALO THERMALO - Thermal Bound (Tape bound - offline)
              WIRE O Wire O - Double Wire Bound (offline)
              Saddle-Stitch Items
              20 sheets max on 20 (text and cover)
              19 sheets max on 20 (text) and 24 (cover)
              18 sheets max on 24 (text and cover)
              All page quantities must be divisible by 4
              Tape Bound Items
              125 sheets max on 20 no cover
              120 sheets max wcover (90 index unless indicated otherwise)
              Perfect Bound Items
              475 sheets max on 20 no cover
              470 sheets max wcover (90 index unless indicated otherwise)
              Double Wire Bound Items
              40 sheets max on 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
              Coil Bound Items
              290 sheets max of 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
              Sides Printed
              Head2Head = Most common Double-sided printing with headers on both pages lining up at the top of the page
              Simplex = Single-sided printing
              Head2Toe = Least common Double-sided printing with header on one page lining up with the footer on the other page
              Number of Forms to a Sheet
              Number of publication pages printed on a sheet of paper at the printerFor example if a 4-page 85 x 11 publication is printed on the front and back sides of an 11 x 17 sheet of paper that is folded in half the Number of Forms to a Sheet = 4Example 2 If a 4-page 55 x 85 publication is printed on the front and back sides of an 85 x 11 sheet of paper that is folded in half the Number of forms to a Sheet = 4
              Number of Sheets Required to Print
              Number of sheets of paper required to print the publicationFor example if a 16-page 85 x 11 publication is printed on the front and back sides of four 11 x 17 sheets of paper that are folded in half and saddle stitched together the Number of Sheets Required to Print = 4Example 4 If a 4-page 55 x 85 publication is printed on the front and back sides of one 85 x 11 sheet of paper that is folded in half the Number of Sheets Required to Print = 1
              Paper Stock Type
              Description
              PLAIN Bond
              ACNTCVR Accent Cover
              BOND3H Bond (3-hole)
              BOOKENV Booklet Envelope
              C1SGLOSS C1S Gloss Finish
              C1SMATTE C1S Matt Finish
              C2SGLOSS C2S Gloss Finish
              C2SMATTE C2S Matt Finish
              CARD Card Stock
              CATLGENV Catalog Envelope
              CATLGENV6 6 Catalog Envelope
              COVERCOLOR Color Cover Copy
              CRCKPEEL Crack N Peel Label
              CUSTOM Custom
              CVRFUTURA Futura Cover
              ENV6x9 Standard 6X9 Envelope
              ENV9X12 Standard 9X12 Envelope
              ETHCERT Ethicon Certificate
              GLOSSCOVER Gloss Cover
              GLOSSTEXT Gloss Text
              HOTSTEXT Hots Text
              INDEX Index
              LABEL80 80 Up Label
              MICROPRT Micro Print
              OFFSET Offset
              PART2 2 Part
              PART3 3 Part
              PART4 4 Part
              PART5 5 Part
              PART6 6 Part
              PERF 12 inch Perfed
              PERMMAT Perm Mat Ad
              PRECUTTAB Pre-Cut Tab
              PREPERF Pre-Perforated
              RECYL Recycled
              SE10ENV 10 Standard Envelope
              SE10ITENV 10 Inside Tint Envelope
              SE9ENV 9 Stanard Envelope
              TAG Tag
              TEXT Text
              TEXTCOLOR Text Color Copy
              TEXTFUTURA Futura Text
              TEXTLASER Text Laser Print
              TRANSPRNCY Transparencies
              VELLUM Vellum
              VELLUM3HP Vellum 3HP
              WE10ENV 10 Window Envelope
              WE9ENV 9 Windor Envelope
              WE9ITENV 9 Inside Tint Window Envelope
              Paper Stock Color
              Black
              Blue
              Buff
              Canary
              Cherry
              Clear
              Cream
              Custom
              Goldrenrod
              Gray
              Green
              Ivory
              Lavender
              Manilla
              NCRPinkCanary
              NCRWhiteBlue
              NCRWhiteBlueCanary
              NCRWhiteCanary
              NCRWhiteCanaryPink
              NCRWhiteCanaryPinkGoldenrod
              NCRWhiteGreen
              NCRWhiteGoldenrodYellow
              NCRWhitePink
              NCRWhiteWhite
              Opaque
              Orange
              Orchid
              Peach
              Pink
              Purple
              Salmon
              Tan
              Violet
              White
              Finished Trim Sizes (listed - width x length)
              11 x 17
              18 x 24 Poster
              24 x 36 Poster
              3 x 5
              36 x 24 Poster
              4 x 6
              475 x 7
              475 x 775
              55 x 85
              6 x 4
              7 x 9
              7385 x 9 (RSI Std)
              85 x 11
              825 x 10875
              825 x 11 (RA product profile std)
              8375 x 10875
              9 x 12
              A4
              A5
              Other - Custom size listed below
              Drilling Locations
              1CENTER
              1LEFTTOP
              1TOPCENTER
              2LEFT
              2LEFT2TOP
              2TOP
              2TOP2LEFT
              2TOP3LEFT
              2TOP5LEFT
              2TOP5RIGHT
              3BOTTOM
              3LEFT
              3LEFT2TOP
              3LEFT3TOP
              3RIGHT
              3TOP
              3TOP5LEFT
              5BOTTOM
              5CENTER
              5LEFT
              5RIGHT
              5RIGHT2TOP
              5TOP
              For TRI fold - select Z or C type Description
              HALF Half
              C C Fold
              DBLEPARLL Double Parallel
              OFFSETZ Offset Z
              SAMPLE See Sample
              SHORT Short Fold
              V V Fold
              Z Z Fold
              Number of Pieces per Poly Wrap
              Publication length Number per Poly Wrap
              77 or more pages 1
              33 to 76 pages 25
              3 to 32 pages 50
              1 or 2 pages 100
              Comments
              CoverText Stock Spine
              100 Gloss Cover If your publication uses a spine make note of that in the comments field Be sure to include the spine as the last page of your PDF Do NOT include that page as part of the publication page count Because the addition of a spine will create an odd page count in the PDF contact a Super User to submit your publication via PDFdirect with an exception tool
              100 Gloss Text
              100 Text
              10pt C1S Cover
              10pt C2S Cover
              10pt C2S Text
              10pt Text Stock
              110 White Index
              12pt C1S Cover
              20 White Opaque Bond
              50 Colored Offset
              50 White Offset
              50 White Opaque
              60 Cover Stock
              60 White Offset
              80 Gloss Cover
              80 Gloss Text
              8pt C1S White
              90 White Index
              CoverText Ink
              Black
              Black + 1 PMS color Type in PMS color
              Black + 2 PMS colors Type in PMS colors
              4 color
              4 color over black
              4 color + 1 PMS color Type in PMS color
              4 color over black + 1 PMS color Type in PMS color
              4 color + 2 PMS colors Type in PMS colors
              4 color + aqueous
              4 color + varnish
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Cannot use quote symbol that is---- Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information White RRD must provide this information NA NA NA NA NA NA 85 11 SIDE NA NA NA NA HALF 85 x 11 50 RRD must provide this information
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B NA PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information GLOSS TEXT 80 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA NA NA NA HALF 85 x 11 RRD must provide this information
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              EA 1 1 See DocMan for the Cost Center selections associated with each Business Group Black amp White B PERFECT PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 2 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA 516 3LEFT NA NA NA NA RRD must provide this information Cover Stock = 90 White IndexText Stock = 20 White Opaque BondCover Ink = BlackText Ink = BlackSpine = If included as last page of PDF
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions EA 1 1 Marketing Commercial Marketing Other November 2008 5 Black amp White B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 4 16 4 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 475 7 SIDE NA NA NA HALF 425 x 7 50 RRD must provide this information Text Stock = 20 White Opaque BondText Ink = Black PN-25192
              Corp 17501
              Bill To 69
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions EA 1 1 Marketing Commercial Marketing Other November 2008 5 Black amp White B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 4 16 4 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 475 7 SIDE NA NA NA HALF 425 x 7 50 RRD must provide this information Text Stock = 20 White Opaque BondText Ink = Black PN-25192
              Details of the Rockwell Automation Print Specifications sheet
              This print specifications sheet is designed with multiple purposes- It is a vehicle to get the most accurate print specifications to RA-approved print vendors- It provides authors with an explanation of all necessary fields to complete before attaching the sheet to your PDF- It provides separate tabs so that an author can fill in all fields related to the publication on the Generic tab or publication-specific template-type tabs to minimize the number of fields an author must completeTo facilitate the most efficient use of this sheet we recommend that you click on the publication-specific tab that most closely fits you publication and use that to complete the print specificationsIMPORTANT Because this sheet was constructed using a sheet that RR Donnelley (RRD) uses to load print specifications there are some columns hidden For example the first field you must complete is Column E or Publication Number Columns A to D are used for RRD purposes and with information only representatives of that RA-approved printer can completeDO NOT delete any hidden columns from the tab you choose to use
              Definitions of Each Tab in Sheet
              Generic pub print specs Single sheet with all required columns for necessary specifications None of the columns are completed All must be completed before attaching the sheet to your PDFThis tab has 39 blank fields you must complete via free text type or pull-down menus
              IN RN pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to installation instructions (IN) and release notes (RN) However you can use this sheet for other publications that are similar to INs and RNsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              UM RM PM pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to user manuals (UM) reference manuals (RM) and programming manuals (PM) However you can use this sheet for other publications that are similar to UMs RMs and PMsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              AP PP pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to application solutions (AP) and product profiles (PP) However you can use this sheet for other publications that are similar to APs and PPsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              BR pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to brochures (BR) However you can use this sheet for other publications that are similar to BRsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              Field definitions Description of information fields used throughout the spreadsheet tabs that may not be immediately obvious to a user
              Attach Print Specs to PDF
              For Acrobat 80 follow these steps1 Open the PDF2 Click on DocumentgtAttach A File A new section appears at the bottom of the PDF3 Browse to the MS Excel file with the print specs and add it to the PDFFor Acrobat 70 follow these steps1 Open the PDF2 Click on the Attachments tab next to the publications bookmarks A new section appears at the bottom of the PDF3 Click on the Add button in the bottom section of the PDF4 Browse to the MS Excel file with the print specs and add it to the PDFFor Acrobat 60 follow these steps1 Open the PDF2 Go to the backcover of the PDF3 Click on the Tools pull-down menu4 Click on this sequence of menu options - Advanced Commenting Attach Attach File Tool A paper clip appears5 Click to put the paper clip somewhere on the backcover The browse window appears6 Browse to the MS Excel file with the print specs and add it to the PDFIMPORTANT If you are using Acrobat 50 or earlier please upgrade
              RA-QR005C-EN-E 608
Page 9: USB-to-ControlNet Cable - Rockwell Automationliterature.rockwellautomation.com/idc/groups/literature/documents/... · USB-to-ControlNet Cable Catalog Number 1784-U2CN Topic Page Important

USB-to-ControlNet Cable 9

Status IndicatorsThe following table describes the cable status indicators

Indicator Status Description

USB Green The cable is configured but no network traffic is present

Flashing green Network traffic is present

Off Unable to transfer data

bull Disconnected from host

bull In one of the following states

ndash default

ndash powered

ndash address

ndash suspend

USB

ControlNet Network Status

Module Status

Publication 1784-IN047A-EN-P - November 2008

10 USB-to-ControlNet Cable

Module Status (MS) Green The cable is operating normally

Off No power to the cable

Flashing green The cable is operating in a normal condition and is online with no connections established

bull The cable may be in Standby mode

bull The cable needs commissioning due to missing incomplete or incorrect configuration

Flashing red The cable has a recoverable fault

Red The cable has an unrecoverable fault and may need to be replaced

Flashing redgreen

The cable is performing a self-test

ControlNet Network Status (NS)

Off Not on network

Red Network interface faulted

Flashing redgreen

Invalid network configuration (for example a MAC ID above UMAX)

Flashing red bull Duplicate node detected

bull Link fault

bull No MAC frames received

Flashing green bull Temporary channel error

bull Listen only

Green Normal operation MAC frame received without error

Indicator Status Description

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 11

Specifications

USB-to-ControlNet Cable Catalog Number 1784-U2CN

Attribute Value

Enclosure type rating Meets IP30

Power dissipation max 05 W

Supply voltage 500V DC 525V DC max

Supply current 75 mA

Power consumption max 05 W

Isolation voltage 30V continuous Basic Insulation Type Type tested at 500V AC for 60 s ControlNet to USB

Wiring category(1)

(1) Use this Conductor Category information for planning conductor routing Refer to Industrial Automation Wiring and Grounding Guidelines publication 1770-41

2 - on communication ports

ControlNet current value 70 mA 24V

Publication 1784-IN047A-EN-P - November 2008

12 USB-to-ControlNet Cable

Environmental Specifications

Attribute Value

Temperature operating

IEC 60068-2-1 (Test Ad Operating Cold) IEC 60068-2-2 (Test Bd Operating Dry Heat) IEC 60068-2-14 (Test Nb Operating Thermal Shock) 0hellip55 degC (32hellip131 degF)

Temperature nonoperating

IEC 60068-2-1 (Test Ab Unpackaged Nonoperating Cold) IEC 60068-2-2 (Test Bb Unpackaged Nonoperating Dry Heat) IEC 60068-2-14 (Test Na Unpackaged Nonoperating Thermal Shock) -10hellip85 degC (14hellip185 degF)

Relative humidity IEC 60068-2-30 (Test Db Unpackaged Damp Heat) 5hellip95 noncondensing

Nonoperating shock IEC 60068-2-27 (Test Ea Unpackaged Shock) 1000 mm (328 ft)

Emissions CISPR 11 Group 1 Class A

ESD immunity IEC 61000-4-2 8 kV air discharges

Radiated RF immunity IEC 61000-4-3 10Vm with 1 kHz sine-wave 80 AM from 80hellip2000 MHz 10Vm with 200 Hz 50 Pulse 100 AM at 900 MHz 10Vm with 200 Hz 50 Pulse 100 AM at 1890 MHz 10Vm with 1 kHz sine-wave 80 AM from 2000hellip2700 MHz

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 13

Certifications

Certifications (when product is marked)(1)

Value

c-UL-us UL Listed Industrial Control Equipment certified for US and Canada See UL File E65584

CE European Union 2004108EC EMC Directive compliant with EN 61326-1 MeasControlLab Industrial Requirements EN 61000-6-2 Industrial Immunity EN 61000-6-4 Industrial Emissions EN 61131-2 Programmable Controllers (Clause 8 Zone A amp B)

C-Tick Australian Radiocommunications Act compliant with ASNZS CISPR 11 Industrial Emissions

CI ControlNet International conformance tested to ControlNet specifications

(1) See the Product Certification link at httpwwwabcom for Declarations of Conformity Certificates and other certification details

Publication 1784-IN047A-EN-P - November 2008

14 USB-to-ControlNet Cable

Additional ResourcesThese documents contain additional information concerning related Rockwell Automation products

Resource Description

ControlNet Coax Media Planning and Installation Guide publication CNET-IN002

Provides ControlNet network planning information

Industrial Automation Wiring and Grounding Guidelines publication 1770-41

Provides general guidelines for installing a Rockwell Automation industrial system

Product Certifications website httpwwwabcom

Provides declarations of conformity certificates and other certification details

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 15

Notes

Publication 1784-IN047A-EN-P - November 2008

Rockwell Automation SupportRockwell Automation provides technical information on the Web to assist you in using its products At httpsupportrockwellautomationcom you can find technical manuals a knowledge base of FAQs technical and application notes sample code and links to software service packs and a MySupport feature that you can customize to make the best use of these tools

For an additional level of technical phone support for installation configuration and troubleshooting we offer TechConnect support programs For more information contact your local distributor or Rockwell Automation representative or visit httpsupportrockwellautomationcom

Installation Assistance

If you experience a problem within the first 24 hours of installation please review the information thats contained in this manual You can also contact a special Customer Support number for initial help in getting your product up and running

New Product Satisfaction Return

Rockwell Automation tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility However if your product is not functioning and needs to be returned follow these procedures

Allen-Bradley Data Highway Plus DH+ PLC-5 RSLinx Rockwell Automation SLC and TechConnect are trademarks of Rockwell Automation Inc

Trademarks not belonging to Rockwell Automation are property of their respective companies

United States 14406463434 Monday ndash Friday 8 am ndash 5 pm EST

Outside United States Please contact your local Rockwell Automation representative for any technical support issues

United States Contact your distributor You must provide a Customer Support case number (see phone number above to obtain one) to your distributor in order to complete the return process

Outside United States Please contact your local Rockwell Automation representative for the return procedure

Publication 1784-IN047A-EN-P - November 2008 PN-25192Copyright copy 2008 Rockwell Automation Inc All rights reserved Printed in the USA

  • Publication 1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions
    • Important User Information
    • Environment and Enclosure
    • About the Cable
    • Install the Cable
      • Obtain the Device Driver for the Cable
      • Configure and Connect the Cable
      • Traffic Analyzer Software
      • Product Dimensions
        • Status Indicators
        • Specifications
        • Additional Resources
        • Back Cover

            • ltlt ASCII85EncodePages false AllowTransparency false AutoPositionEPSFiles false AutoRotatePages None Binding Left CalGrayProfile (Gray Gamma 22) CalRGBProfile (sRGB IEC61966-21) CalCMYKProfile (Euroscale Uncoated v2) sRGBProfile (sRGB IEC61966-21) CannotEmbedFontPolicy Error CompatibilityLevel 14 CompressObjects Tags CompressPages true ConvertImagesToIndexed true PassThroughJPEGImages true CreateJDFFile false CreateJobTicket true DefaultRenderingIntent Default DetectBlends true DetectCurves 00000 ColorConversionStrategy LeaveColorUnchanged DoThumbnails false EmbedAllFonts true EmbedOpenType false ParseICCProfilesInComments true EmbedJobOptions true DSCReportingLevel 0 EmitDSCWarnings false EndPage -1 ImageMemory 1048576 LockDistillerParams true MaxSubsetPct 99 Optimize true OPM 1 ParseDSCComments false ParseDSCCommentsForDocInfo false PreserveCopyPage true PreserveDICMYKValues true PreserveEPSInfo false PreserveFlatness true PreserveHalftoneInfo true PreserveOPIComments false PreserveOverprintSettings true StartPage 1 SubsetFonts false TransferFunctionInfo Apply UCRandBGInfo Preserve UsePrologue false ColorSettingsFile (None) AlwaysEmbed [ true ArialMT ] NeverEmbed [ true ] AntiAliasColorImages false CropColorImages true ColorImageMinResolution 150 ColorImageMinResolutionPolicy OK DownsampleColorImages true ColorImageDownsampleType Bicubic ColorImageResolution 150 ColorImageDepth 8 ColorImageMinDownsampleDepth 1 ColorImageDownsampleThreshold 100000 EncodeColorImages true ColorImageFilter FlateEncode AutoFilterColorImages false ColorImageAutoFilterStrategy JPEG ColorACSImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt ColorImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt JPEG2000ColorACSImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt JPEG2000ColorImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt AntiAliasGrayImages false CropGrayImages true GrayImageMinResolution 150 GrayImageMinResolutionPolicy OK DownsampleGrayImages true GrayImageDownsampleType Bicubic GrayImageResolution 150 GrayImageDepth 8 GrayImageMinDownsampleDepth 2 GrayImageDownsampleThreshold 100000 EncodeGrayImages true GrayImageFilter FlateEncode AutoFilterGrayImages false GrayImageAutoFilterStrategy JPEG GrayACSImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt GrayImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt JPEG2000GrayACSImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt JPEG2000GrayImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt AntiAliasMonoImages false CropMonoImages true MonoImageMinResolution 900 MonoImageMinResolutionPolicy OK DownsampleMonoImages true MonoImageDownsampleType Bicubic MonoImageResolution 900 MonoImageDepth -1 MonoImageDownsampleThreshold 100000 EncodeMonoImages true MonoImageFilter CCITTFaxEncode MonoImageDict ltlt K -1 gtgt AllowPSXObjects true CheckCompliance [ None ] PDFX1aCheck false PDFX3Check false PDFXCompliantPDFOnly false PDFXNoTrimBoxError true PDFXTrimBoxToMediaBoxOffset [ 000000 000000 000000 000000 ] PDFXSetBleedBoxToMediaBox true PDFXBleedBoxToTrimBoxOffset [ 000000 000000 000000 000000 ] PDFXOutputIntentProfile (None) PDFXOutputConditionIdentifier () PDFXOutputCondition () PDFXRegistryName (httpwwwcolororg) PDFXTrapped False SyntheticBoldness 1000000 Description ltlt JPN ltFEFF3053306e8a2d5b9a306f300130d330b830cd30b9658766f8306e8868793a304a3088307353705237306b90693057305f00200050004400460020658766f830924f5c62103059308b3068304d306b4f7f75283057307e305930023053306e8a2d5b9a30674f5c62103057305f00200050004400460020658766f8306f0020004100630072006f0062006100740020304a30883073002000520065006100640065007200200035002e003000204ee5964d30678868793a3067304d307e30593002gt DEU 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 FRA 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 PTB 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 DAN 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 NLD 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 ESP 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 SUO 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 ITA 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 NOR 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 SVE ltFEFF0041006e007600e4006e00640020006400650020006800e4007200200069006e0073007400e4006c006c006e0069006e006700610072006e00610020006e00e40072002000640075002000760069006c006c00200073006b0061007000610020005000440046002d0064006f006b0075006d0065006e007400200073006f006d00200070006100730073006100720020006600f600720020007000e5006c00690074006c006900670020007600690073006e0069006e00670020006f006300680020007500740073006b0072006900660074002000610076002000610066006600e4007200730064006f006b0075006d0065006e0074002e0020005000440046002d0064006f006b0075006d0065006e00740065006e0020006b0061006e002000f600700070006e006100730020006d006500640020004100630072006f0062006100740020006f00630068002000520065006100640065007200200035002e003000200065006c006c00650072002000730065006e006100720065002egt ENU (Rockwell Job Options for Web-only PDF Files) gtgtgtgt setdistillerparamsltlt HWResolution [2540 2540] PageSize [792000 1224000]gtgt setpagedevice

              Intro

              ampLRA-QR005B-EN-E 308

              Generic pub print specs

              ampCItem Setup Sheet for Conversion Transfers
              ampLJIT-D-print SpreadsheetampCRA-QR005C-EN-EampRampD ampT

              IN RN pub type specs

              UM RM PM pub type specs

              AP PP pub type specs

              BR pub type specs

              Field definitions

              ampL04032006ampRampP
              PackagingOrdering Unit Of Measure
              EA = Each
              PK = Pack
              PD = Pad
              RL = Roll
              BK = Book
              CT = Carton
              BX = Box
              ST = Set
              Multiple Order Qty
              Separate methods of ordering same item For example if an item is packaged 50 per pad 5 pads per carton You can set the order qty as 50 each (one pad) or 250 each (1 ctn)
              Business Group
              The business group that the publication supports Your choice here determines the list you choose from for Cost Center
              CorporateBusiness Development
              Finance
              Human Resources
              IT
              Logistics
              Manufacturing
              Marketing Commercial
              Marketing Europe
              Marketing Other
              Operations
              Order Services
              Other
              Process Improvement
              Procurement
              Quality
              Sales
              Max Order Quantity
              Presale items = 100
              Postsale items = 5
              NOTE You can use other quantities but the delivery may take a bit longer because a system admin must approve it
              Item Category - Form (F) or Book (B)
              Form (F) = Any publication that is a single sheet (ie 1 or 2 pages) an envelope or carbonless form
              Book (B) = Any publication that contains 3 or more pages
              BindingStitching
              For a Form (F) use
              CARBONLESS
              CUTSHEET
              ENVELOPE
              For a Book (B) use
              LOOSE LOOSE -Loose Leaf
              PERFECT PERFECT - Perfect Bound
              PLASTCOIL PLASTCOIL - Plastic Coil (Coil Bound)
              SADDLE SADDLE - Saddle Stitch
              STAPLED1 STAPLED1 -1 position
              STAPLED1B STAPLED1B - bottom 1 position
              STAPLED2 STAPLED2 - 2 positions
              THERMAL THERMAL - Thermal bound (Tape bound)
              THERMALO THERMALO - Thermal Bound (Tape bound - offline)
              WIRE O Wire O - Double Wire Bound (offline)
              Saddle-Stitch Items
              20 sheets max on 20 (text and cover)
              19 sheets max on 20 (text) and 24 (cover)
              18 sheets max on 24 (text and cover)
              All page quantities must be divisible by 4
              Tape Bound Items
              125 sheets max on 20 no cover
              120 sheets max wcover (90 index unless indicated otherwise)
              Perfect Bound Items
              475 sheets max on 20 no cover
              470 sheets max wcover (90 index unless indicated otherwise)
              Double Wire Bound Items
              40 sheets max on 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
              Coil Bound Items
              290 sheets max of 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
              Sides Printed
              Head2Head = Most common Double-sided printing with headers on both pages lining up at the top of the page
              Simplex = Single-sided printing
              Head2Toe = Least common Double-sided printing with header on one page lining up with the footer on the other page
              Number of Forms to a Sheet
              Number of publication pages printed on a sheet of paper at the printerFor example if a 4-page 85 x 11 publication is printed on the front and back sides of an 11 x 17 sheet of paper that is folded in half the Number of Forms to a Sheet = 4Example 2 If a 4-page 55 x 85 publication is printed on the front and back sides of an 85 x 11 sheet of paper that is folded in half the Number of forms to a Sheet = 4
              Number of Sheets Required to Print
              Number of sheets of paper required to print the publicationFor example if a 16-page 85 x 11 publication is printed on the front and back sides of four 11 x 17 sheets of paper that are folded in half and saddle stitched together the Number of Sheets Required to Print = 4Example 4 If a 4-page 55 x 85 publication is printed on the front and back sides of one 85 x 11 sheet of paper that is folded in half the Number of Sheets Required to Print = 1
              Paper Stock Type
              Description
              PLAIN Bond
              ACNTCVR Accent Cover
              BOND3H Bond (3-hole)
              BOOKENV Booklet Envelope
              C1SGLOSS C1S Gloss Finish
              C1SMATTE C1S Matt Finish
              C2SGLOSS C2S Gloss Finish
              C2SMATTE C2S Matt Finish
              CARD Card Stock
              CATLGENV Catalog Envelope
              CATLGENV6 6 Catalog Envelope
              COVERCOLOR Color Cover Copy
              CRCKPEEL Crack N Peel Label
              CUSTOM Custom
              CVRFUTURA Futura Cover
              ENV6x9 Standard 6X9 Envelope
              ENV9X12 Standard 9X12 Envelope
              ETHCERT Ethicon Certificate
              GLOSSCOVER Gloss Cover
              GLOSSTEXT Gloss Text
              HOTSTEXT Hots Text
              INDEX Index
              LABEL80 80 Up Label
              MICROPRT Micro Print
              OFFSET Offset
              PART2 2 Part
              PART3 3 Part
              PART4 4 Part
              PART5 5 Part
              PART6 6 Part
              PERF 12 inch Perfed
              PERMMAT Perm Mat Ad
              PRECUTTAB Pre-Cut Tab
              PREPERF Pre-Perforated
              RECYL Recycled
              SE10ENV 10 Standard Envelope
              SE10ITENV 10 Inside Tint Envelope
              SE9ENV 9 Stanard Envelope
              TAG Tag
              TEXT Text
              TEXTCOLOR Text Color Copy
              TEXTFUTURA Futura Text
              TEXTLASER Text Laser Print
              TRANSPRNCY Transparencies
              VELLUM Vellum
              VELLUM3HP Vellum 3HP
              WE10ENV 10 Window Envelope
              WE9ENV 9 Windor Envelope
              WE9ITENV 9 Inside Tint Window Envelope
              Paper Stock Color
              Black
              Blue
              Buff
              Canary
              Cherry
              Clear
              Cream
              Custom
              Goldrenrod
              Gray
              Green
              Ivory
              Lavender
              Manilla
              NCRPinkCanary
              NCRWhiteBlue
              NCRWhiteBlueCanary
              NCRWhiteCanary
              NCRWhiteCanaryPink
              NCRWhiteCanaryPinkGoldenrod
              NCRWhiteGreen
              NCRWhiteGoldenrodYellow
              NCRWhitePink
              NCRWhiteWhite
              Opaque
              Orange
              Orchid
              Peach
              Pink
              Purple
              Salmon
              Tan
              Violet
              White
              Finished Trim Sizes (listed - width x length)
              11 x 17
              18 x 24 Poster
              24 x 36 Poster
              3 x 5
              36 x 24 Poster
              4 x 6
              475 x 7
              475 x 775
              55 x 85
              6 x 4
              7 x 9
              7385 x 9 (RSI Std)
              85 x 11
              825 x 10875
              825 x 11 (RA product profile std)
              8375 x 10875
              9 x 12
              A4
              A5
              Other - Custom size listed below
              Drilling Locations
              1CENTER
              1LEFTTOP
              1TOPCENTER
              2LEFT
              2LEFT2TOP
              2TOP
              2TOP2LEFT
              2TOP3LEFT
              2TOP5LEFT
              2TOP5RIGHT
              3BOTTOM
              3LEFT
              3LEFT2TOP
              3LEFT3TOP
              3RIGHT
              3TOP
              3TOP5LEFT
              5BOTTOM
              5CENTER
              5LEFT
              5RIGHT
              5RIGHT2TOP
              5TOP
              For TRI fold - select Z or C type Description
              HALF Half
              C C Fold
              DBLEPARLL Double Parallel
              OFFSETZ Offset Z
              SAMPLE See Sample
              SHORT Short Fold
              V V Fold
              Z Z Fold
              Number of Pieces per Poly Wrap
              Publication length Number per Poly Wrap
              77 or more pages 1
              33 to 76 pages 25
              3 to 32 pages 50
              1 or 2 pages 100
              Comments
              CoverText Stock Spine
              100 Gloss Cover If your publication uses a spine make note of that in the comments field Be sure to include the spine as the last page of your PDF Do NOT include that page as part of the publication page count Because the addition of a spine will create an odd page count in the PDF contact a Super User to submit your publication via PDFdirect with an exception tool
              100 Gloss Text
              100 Text
              10pt C1S Cover
              10pt C2S Cover
              10pt C2S Text
              10pt Text Stock
              110 White Index
              12pt C1S Cover
              20 White Opaque Bond
              50 Colored Offset
              50 White Offset
              50 White Opaque
              60 Cover Stock
              60 White Offset
              80 Gloss Cover
              80 Gloss Text
              8pt C1S White
              90 White Index
              CoverText Ink
              Black
              Black + 1 PMS color Type in PMS color
              Black + 2 PMS colors Type in PMS colors
              4 color
              4 color over black
              4 color + 1 PMS color Type in PMS color
              4 color over black + 1 PMS color Type in PMS color
              4 color + 2 PMS colors Type in PMS colors
              4 color + aqueous
              4 color + varnish
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Cannot use quote symbol that is---- Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information White RRD must provide this information NA NA NA NA NA NA 85 11 SIDE NA NA NA NA HALF 85 x 11 50 RRD must provide this information
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B NA PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information GLOSS TEXT 80 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA NA NA NA HALF 85 x 11 RRD must provide this information
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              EA 1 1 See DocMan for the Cost Center selections associated with each Business Group Black amp White B PERFECT PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 2 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA 516 3LEFT NA NA NA NA RRD must provide this information Cover Stock = 90 White IndexText Stock = 20 White Opaque BondCover Ink = BlackText Ink = BlackSpine = If included as last page of PDF
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions EA 1 1 Marketing Commercial Marketing Other November 2008 5 Black amp White B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 4 16 4 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 475 7 SIDE NA NA NA HALF 425 x 7 50 RRD must provide this information Text Stock = 20 White Opaque BondText Ink = Black PN-25192
              Corp 17501
              Bill To 69
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions EA 1 1 Marketing Commercial Marketing Other November 2008 5 Black amp White B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 4 16 4 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 475 7 SIDE NA NA NA HALF 425 x 7 50 RRD must provide this information Text Stock = 20 White Opaque BondText Ink = Black PN-25192
              Details of the Rockwell Automation Print Specifications sheet
              This print specifications sheet is designed with multiple purposes- It is a vehicle to get the most accurate print specifications to RA-approved print vendors- It provides authors with an explanation of all necessary fields to complete before attaching the sheet to your PDF- It provides separate tabs so that an author can fill in all fields related to the publication on the Generic tab or publication-specific template-type tabs to minimize the number of fields an author must completeTo facilitate the most efficient use of this sheet we recommend that you click on the publication-specific tab that most closely fits you publication and use that to complete the print specificationsIMPORTANT Because this sheet was constructed using a sheet that RR Donnelley (RRD) uses to load print specifications there are some columns hidden For example the first field you must complete is Column E or Publication Number Columns A to D are used for RRD purposes and with information only representatives of that RA-approved printer can completeDO NOT delete any hidden columns from the tab you choose to use
              Definitions of Each Tab in Sheet
              Generic pub print specs Single sheet with all required columns for necessary specifications None of the columns are completed All must be completed before attaching the sheet to your PDFThis tab has 39 blank fields you must complete via free text type or pull-down menus
              IN RN pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to installation instructions (IN) and release notes (RN) However you can use this sheet for other publications that are similar to INs and RNsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              UM RM PM pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to user manuals (UM) reference manuals (RM) and programming manuals (PM) However you can use this sheet for other publications that are similar to UMs RMs and PMsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              AP PP pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to application solutions (AP) and product profiles (PP) However you can use this sheet for other publications that are similar to APs and PPsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              BR pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to brochures (BR) However you can use this sheet for other publications that are similar to BRsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              Field definitions Description of information fields used throughout the spreadsheet tabs that may not be immediately obvious to a user
              Attach Print Specs to PDF
              For Acrobat 80 follow these steps1 Open the PDF2 Click on DocumentgtAttach A File A new section appears at the bottom of the PDF3 Browse to the MS Excel file with the print specs and add it to the PDFFor Acrobat 70 follow these steps1 Open the PDF2 Click on the Attachments tab next to the publications bookmarks A new section appears at the bottom of the PDF3 Click on the Add button in the bottom section of the PDF4 Browse to the MS Excel file with the print specs and add it to the PDFFor Acrobat 60 follow these steps1 Open the PDF2 Go to the backcover of the PDF3 Click on the Tools pull-down menu4 Click on this sequence of menu options - Advanced Commenting Attach Attach File Tool A paper clip appears5 Click to put the paper clip somewhere on the backcover The browse window appears6 Browse to the MS Excel file with the print specs and add it to the PDFIMPORTANT If you are using Acrobat 50 or earlier please upgrade
              RA-QR005C-EN-E 608
Page 10: USB-to-ControlNet Cable - Rockwell Automationliterature.rockwellautomation.com/idc/groups/literature/documents/... · USB-to-ControlNet Cable Catalog Number 1784-U2CN Topic Page Important

10 USB-to-ControlNet Cable

Module Status (MS) Green The cable is operating normally

Off No power to the cable

Flashing green The cable is operating in a normal condition and is online with no connections established

bull The cable may be in Standby mode

bull The cable needs commissioning due to missing incomplete or incorrect configuration

Flashing red The cable has a recoverable fault

Red The cable has an unrecoverable fault and may need to be replaced

Flashing redgreen

The cable is performing a self-test

ControlNet Network Status (NS)

Off Not on network

Red Network interface faulted

Flashing redgreen

Invalid network configuration (for example a MAC ID above UMAX)

Flashing red bull Duplicate node detected

bull Link fault

bull No MAC frames received

Flashing green bull Temporary channel error

bull Listen only

Green Normal operation MAC frame received without error

Indicator Status Description

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 11

Specifications

USB-to-ControlNet Cable Catalog Number 1784-U2CN

Attribute Value

Enclosure type rating Meets IP30

Power dissipation max 05 W

Supply voltage 500V DC 525V DC max

Supply current 75 mA

Power consumption max 05 W

Isolation voltage 30V continuous Basic Insulation Type Type tested at 500V AC for 60 s ControlNet to USB

Wiring category(1)

(1) Use this Conductor Category information for planning conductor routing Refer to Industrial Automation Wiring and Grounding Guidelines publication 1770-41

2 - on communication ports

ControlNet current value 70 mA 24V

Publication 1784-IN047A-EN-P - November 2008

12 USB-to-ControlNet Cable

Environmental Specifications

Attribute Value

Temperature operating

IEC 60068-2-1 (Test Ad Operating Cold) IEC 60068-2-2 (Test Bd Operating Dry Heat) IEC 60068-2-14 (Test Nb Operating Thermal Shock) 0hellip55 degC (32hellip131 degF)

Temperature nonoperating

IEC 60068-2-1 (Test Ab Unpackaged Nonoperating Cold) IEC 60068-2-2 (Test Bb Unpackaged Nonoperating Dry Heat) IEC 60068-2-14 (Test Na Unpackaged Nonoperating Thermal Shock) -10hellip85 degC (14hellip185 degF)

Relative humidity IEC 60068-2-30 (Test Db Unpackaged Damp Heat) 5hellip95 noncondensing

Nonoperating shock IEC 60068-2-27 (Test Ea Unpackaged Shock) 1000 mm (328 ft)

Emissions CISPR 11 Group 1 Class A

ESD immunity IEC 61000-4-2 8 kV air discharges

Radiated RF immunity IEC 61000-4-3 10Vm with 1 kHz sine-wave 80 AM from 80hellip2000 MHz 10Vm with 200 Hz 50 Pulse 100 AM at 900 MHz 10Vm with 200 Hz 50 Pulse 100 AM at 1890 MHz 10Vm with 1 kHz sine-wave 80 AM from 2000hellip2700 MHz

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 13

Certifications

Certifications (when product is marked)(1)

Value

c-UL-us UL Listed Industrial Control Equipment certified for US and Canada See UL File E65584

CE European Union 2004108EC EMC Directive compliant with EN 61326-1 MeasControlLab Industrial Requirements EN 61000-6-2 Industrial Immunity EN 61000-6-4 Industrial Emissions EN 61131-2 Programmable Controllers (Clause 8 Zone A amp B)

C-Tick Australian Radiocommunications Act compliant with ASNZS CISPR 11 Industrial Emissions

CI ControlNet International conformance tested to ControlNet specifications

(1) See the Product Certification link at httpwwwabcom for Declarations of Conformity Certificates and other certification details

Publication 1784-IN047A-EN-P - November 2008

14 USB-to-ControlNet Cable

Additional ResourcesThese documents contain additional information concerning related Rockwell Automation products

Resource Description

ControlNet Coax Media Planning and Installation Guide publication CNET-IN002

Provides ControlNet network planning information

Industrial Automation Wiring and Grounding Guidelines publication 1770-41

Provides general guidelines for installing a Rockwell Automation industrial system

Product Certifications website httpwwwabcom

Provides declarations of conformity certificates and other certification details

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 15

Notes

Publication 1784-IN047A-EN-P - November 2008

Rockwell Automation SupportRockwell Automation provides technical information on the Web to assist you in using its products At httpsupportrockwellautomationcom you can find technical manuals a knowledge base of FAQs technical and application notes sample code and links to software service packs and a MySupport feature that you can customize to make the best use of these tools

For an additional level of technical phone support for installation configuration and troubleshooting we offer TechConnect support programs For more information contact your local distributor or Rockwell Automation representative or visit httpsupportrockwellautomationcom

Installation Assistance

If you experience a problem within the first 24 hours of installation please review the information thats contained in this manual You can also contact a special Customer Support number for initial help in getting your product up and running

New Product Satisfaction Return

Rockwell Automation tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility However if your product is not functioning and needs to be returned follow these procedures

Allen-Bradley Data Highway Plus DH+ PLC-5 RSLinx Rockwell Automation SLC and TechConnect are trademarks of Rockwell Automation Inc

Trademarks not belonging to Rockwell Automation are property of their respective companies

United States 14406463434 Monday ndash Friday 8 am ndash 5 pm EST

Outside United States Please contact your local Rockwell Automation representative for any technical support issues

United States Contact your distributor You must provide a Customer Support case number (see phone number above to obtain one) to your distributor in order to complete the return process

Outside United States Please contact your local Rockwell Automation representative for the return procedure

Publication 1784-IN047A-EN-P - November 2008 PN-25192Copyright copy 2008 Rockwell Automation Inc All rights reserved Printed in the USA

  • Publication 1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions
    • Important User Information
    • Environment and Enclosure
    • About the Cable
    • Install the Cable
      • Obtain the Device Driver for the Cable
      • Configure and Connect the Cable
      • Traffic Analyzer Software
      • Product Dimensions
        • Status Indicators
        • Specifications
        • Additional Resources
        • Back Cover

            • ltlt ASCII85EncodePages false AllowTransparency false AutoPositionEPSFiles false AutoRotatePages None Binding Left CalGrayProfile (Gray Gamma 22) CalRGBProfile (sRGB IEC61966-21) CalCMYKProfile (Euroscale Uncoated v2) sRGBProfile (sRGB IEC61966-21) CannotEmbedFontPolicy Error CompatibilityLevel 14 CompressObjects Tags CompressPages true ConvertImagesToIndexed true PassThroughJPEGImages true CreateJDFFile false CreateJobTicket true DefaultRenderingIntent Default DetectBlends true DetectCurves 00000 ColorConversionStrategy LeaveColorUnchanged DoThumbnails false EmbedAllFonts true EmbedOpenType false ParseICCProfilesInComments true EmbedJobOptions true DSCReportingLevel 0 EmitDSCWarnings false EndPage -1 ImageMemory 1048576 LockDistillerParams true MaxSubsetPct 99 Optimize true OPM 1 ParseDSCComments false ParseDSCCommentsForDocInfo false PreserveCopyPage true PreserveDICMYKValues true PreserveEPSInfo false PreserveFlatness true PreserveHalftoneInfo true PreserveOPIComments false PreserveOverprintSettings true StartPage 1 SubsetFonts false TransferFunctionInfo Apply UCRandBGInfo Preserve UsePrologue false ColorSettingsFile (None) AlwaysEmbed [ true ArialMT ] NeverEmbed [ true ] AntiAliasColorImages false CropColorImages true ColorImageMinResolution 150 ColorImageMinResolutionPolicy OK DownsampleColorImages true ColorImageDownsampleType Bicubic ColorImageResolution 150 ColorImageDepth 8 ColorImageMinDownsampleDepth 1 ColorImageDownsampleThreshold 100000 EncodeColorImages true ColorImageFilter FlateEncode AutoFilterColorImages false ColorImageAutoFilterStrategy JPEG ColorACSImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt ColorImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt JPEG2000ColorACSImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt JPEG2000ColorImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt AntiAliasGrayImages false CropGrayImages true GrayImageMinResolution 150 GrayImageMinResolutionPolicy OK DownsampleGrayImages true GrayImageDownsampleType Bicubic GrayImageResolution 150 GrayImageDepth 8 GrayImageMinDownsampleDepth 2 GrayImageDownsampleThreshold 100000 EncodeGrayImages true GrayImageFilter FlateEncode AutoFilterGrayImages false GrayImageAutoFilterStrategy JPEG GrayACSImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt GrayImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt JPEG2000GrayACSImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt JPEG2000GrayImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt AntiAliasMonoImages false CropMonoImages true MonoImageMinResolution 900 MonoImageMinResolutionPolicy OK DownsampleMonoImages true MonoImageDownsampleType Bicubic MonoImageResolution 900 MonoImageDepth -1 MonoImageDownsampleThreshold 100000 EncodeMonoImages true MonoImageFilter CCITTFaxEncode MonoImageDict ltlt K -1 gtgt AllowPSXObjects true CheckCompliance [ None ] PDFX1aCheck false PDFX3Check false PDFXCompliantPDFOnly false PDFXNoTrimBoxError true PDFXTrimBoxToMediaBoxOffset [ 000000 000000 000000 000000 ] PDFXSetBleedBoxToMediaBox true PDFXBleedBoxToTrimBoxOffset [ 000000 000000 000000 000000 ] PDFXOutputIntentProfile (None) PDFXOutputConditionIdentifier () PDFXOutputCondition () PDFXRegistryName (httpwwwcolororg) PDFXTrapped False SyntheticBoldness 1000000 Description ltlt JPN ltFEFF3053306e8a2d5b9a306f300130d330b830cd30b9658766f8306e8868793a304a3088307353705237306b90693057305f00200050004400460020658766f830924f5c62103059308b3068304d306b4f7f75283057307e305930023053306e8a2d5b9a30674f5c62103057305f00200050004400460020658766f8306f0020004100630072006f0062006100740020304a30883073002000520065006100640065007200200035002e003000204ee5964d30678868793a3067304d307e30593002gt DEU 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 FRA 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 PTB 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 DAN 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 NLD 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 ESP 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 SUO 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 ITA ltFEFF00550073006100720065002000710075006500730074006500200069006d0070006f007300740061007a0069006f006e00690020007000650072002000630072006500610072006500200064006f00630075006d0065006e007400690020005000440046002000610064006100740074006900200070006500720020006c00610020007300740061006d00700061002000650020006c0061002000760069007300750061006c0069007a007a0061007a0069006f006e006500200064006900200064006f00630075006d0065006e0074006900200061007a00690065006e00640061006c0069002e0020004900200064006f00630075006d0065006e00740069002000500044004600200070006f00730073006f006e006f0020006500730073006500720065002000610070006500720074006900200063006f006e0020004100630072006f00620061007400200065002000520065006100640065007200200035002e003000200065002000760065007200730069006f006e006900200073007500630063006500730073006900760065002egt NOR 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 SVE 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 ENU (Rockwell Job Options for Web-only PDF Files) gtgtgtgt setdistillerparamsltlt HWResolution [2540 2540] PageSize [792000 1224000]gtgt setpagedevice

              Intro

              ampLRA-QR005B-EN-E 308

              Generic pub print specs

              ampCItem Setup Sheet for Conversion Transfers
              ampLJIT-D-print SpreadsheetampCRA-QR005C-EN-EampRampD ampT

              IN RN pub type specs

              UM RM PM pub type specs

              AP PP pub type specs

              BR pub type specs

              Field definitions

              ampL04032006ampRampP
              PackagingOrdering Unit Of Measure
              EA = Each
              PK = Pack
              PD = Pad
              RL = Roll
              BK = Book
              CT = Carton
              BX = Box
              ST = Set
              Multiple Order Qty
              Separate methods of ordering same item For example if an item is packaged 50 per pad 5 pads per carton You can set the order qty as 50 each (one pad) or 250 each (1 ctn)
              Business Group
              The business group that the publication supports Your choice here determines the list you choose from for Cost Center
              CorporateBusiness Development
              Finance
              Human Resources
              IT
              Logistics
              Manufacturing
              Marketing Commercial
              Marketing Europe
              Marketing Other
              Operations
              Order Services
              Other
              Process Improvement
              Procurement
              Quality
              Sales
              Max Order Quantity
              Presale items = 100
              Postsale items = 5
              NOTE You can use other quantities but the delivery may take a bit longer because a system admin must approve it
              Item Category - Form (F) or Book (B)
              Form (F) = Any publication that is a single sheet (ie 1 or 2 pages) an envelope or carbonless form
              Book (B) = Any publication that contains 3 or more pages
              BindingStitching
              For a Form (F) use
              CARBONLESS
              CUTSHEET
              ENVELOPE
              For a Book (B) use
              LOOSE LOOSE -Loose Leaf
              PERFECT PERFECT - Perfect Bound
              PLASTCOIL PLASTCOIL - Plastic Coil (Coil Bound)
              SADDLE SADDLE - Saddle Stitch
              STAPLED1 STAPLED1 -1 position
              STAPLED1B STAPLED1B - bottom 1 position
              STAPLED2 STAPLED2 - 2 positions
              THERMAL THERMAL - Thermal bound (Tape bound)
              THERMALO THERMALO - Thermal Bound (Tape bound - offline)
              WIRE O Wire O - Double Wire Bound (offline)
              Saddle-Stitch Items
              20 sheets max on 20 (text and cover)
              19 sheets max on 20 (text) and 24 (cover)
              18 sheets max on 24 (text and cover)
              All page quantities must be divisible by 4
              Tape Bound Items
              125 sheets max on 20 no cover
              120 sheets max wcover (90 index unless indicated otherwise)
              Perfect Bound Items
              475 sheets max on 20 no cover
              470 sheets max wcover (90 index unless indicated otherwise)
              Double Wire Bound Items
              40 sheets max on 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
              Coil Bound Items
              290 sheets max of 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
              Sides Printed
              Head2Head = Most common Double-sided printing with headers on both pages lining up at the top of the page
              Simplex = Single-sided printing
              Head2Toe = Least common Double-sided printing with header on one page lining up with the footer on the other page
              Number of Forms to a Sheet
              Number of publication pages printed on a sheet of paper at the printerFor example if a 4-page 85 x 11 publication is printed on the front and back sides of an 11 x 17 sheet of paper that is folded in half the Number of Forms to a Sheet = 4Example 2 If a 4-page 55 x 85 publication is printed on the front and back sides of an 85 x 11 sheet of paper that is folded in half the Number of forms to a Sheet = 4
              Number of Sheets Required to Print
              Number of sheets of paper required to print the publicationFor example if a 16-page 85 x 11 publication is printed on the front and back sides of four 11 x 17 sheets of paper that are folded in half and saddle stitched together the Number of Sheets Required to Print = 4Example 4 If a 4-page 55 x 85 publication is printed on the front and back sides of one 85 x 11 sheet of paper that is folded in half the Number of Sheets Required to Print = 1
              Paper Stock Type
              Description
              PLAIN Bond
              ACNTCVR Accent Cover
              BOND3H Bond (3-hole)
              BOOKENV Booklet Envelope
              C1SGLOSS C1S Gloss Finish
              C1SMATTE C1S Matt Finish
              C2SGLOSS C2S Gloss Finish
              C2SMATTE C2S Matt Finish
              CARD Card Stock
              CATLGENV Catalog Envelope
              CATLGENV6 6 Catalog Envelope
              COVERCOLOR Color Cover Copy
              CRCKPEEL Crack N Peel Label
              CUSTOM Custom
              CVRFUTURA Futura Cover
              ENV6x9 Standard 6X9 Envelope
              ENV9X12 Standard 9X12 Envelope
              ETHCERT Ethicon Certificate
              GLOSSCOVER Gloss Cover
              GLOSSTEXT Gloss Text
              HOTSTEXT Hots Text
              INDEX Index
              LABEL80 80 Up Label
              MICROPRT Micro Print
              OFFSET Offset
              PART2 2 Part
              PART3 3 Part
              PART4 4 Part
              PART5 5 Part
              PART6 6 Part
              PERF 12 inch Perfed
              PERMMAT Perm Mat Ad
              PRECUTTAB Pre-Cut Tab
              PREPERF Pre-Perforated
              RECYL Recycled
              SE10ENV 10 Standard Envelope
              SE10ITENV 10 Inside Tint Envelope
              SE9ENV 9 Stanard Envelope
              TAG Tag
              TEXT Text
              TEXTCOLOR Text Color Copy
              TEXTFUTURA Futura Text
              TEXTLASER Text Laser Print
              TRANSPRNCY Transparencies
              VELLUM Vellum
              VELLUM3HP Vellum 3HP
              WE10ENV 10 Window Envelope
              WE9ENV 9 Windor Envelope
              WE9ITENV 9 Inside Tint Window Envelope
              Paper Stock Color
              Black
              Blue
              Buff
              Canary
              Cherry
              Clear
              Cream
              Custom
              Goldrenrod
              Gray
              Green
              Ivory
              Lavender
              Manilla
              NCRPinkCanary
              NCRWhiteBlue
              NCRWhiteBlueCanary
              NCRWhiteCanary
              NCRWhiteCanaryPink
              NCRWhiteCanaryPinkGoldenrod
              NCRWhiteGreen
              NCRWhiteGoldenrodYellow
              NCRWhitePink
              NCRWhiteWhite
              Opaque
              Orange
              Orchid
              Peach
              Pink
              Purple
              Salmon
              Tan
              Violet
              White
              Finished Trim Sizes (listed - width x length)
              11 x 17
              18 x 24 Poster
              24 x 36 Poster
              3 x 5
              36 x 24 Poster
              4 x 6
              475 x 7
              475 x 775
              55 x 85
              6 x 4
              7 x 9
              7385 x 9 (RSI Std)
              85 x 11
              825 x 10875
              825 x 11 (RA product profile std)
              8375 x 10875
              9 x 12
              A4
              A5
              Other - Custom size listed below
              Drilling Locations
              1CENTER
              1LEFTTOP
              1TOPCENTER
              2LEFT
              2LEFT2TOP
              2TOP
              2TOP2LEFT
              2TOP3LEFT
              2TOP5LEFT
              2TOP5RIGHT
              3BOTTOM
              3LEFT
              3LEFT2TOP
              3LEFT3TOP
              3RIGHT
              3TOP
              3TOP5LEFT
              5BOTTOM
              5CENTER
              5LEFT
              5RIGHT
              5RIGHT2TOP
              5TOP
              For TRI fold - select Z or C type Description
              HALF Half
              C C Fold
              DBLEPARLL Double Parallel
              OFFSETZ Offset Z
              SAMPLE See Sample
              SHORT Short Fold
              V V Fold
              Z Z Fold
              Number of Pieces per Poly Wrap
              Publication length Number per Poly Wrap
              77 or more pages 1
              33 to 76 pages 25
              3 to 32 pages 50
              1 or 2 pages 100
              Comments
              CoverText Stock Spine
              100 Gloss Cover If your publication uses a spine make note of that in the comments field Be sure to include the spine as the last page of your PDF Do NOT include that page as part of the publication page count Because the addition of a spine will create an odd page count in the PDF contact a Super User to submit your publication via PDFdirect with an exception tool
              100 Gloss Text
              100 Text
              10pt C1S Cover
              10pt C2S Cover
              10pt C2S Text
              10pt Text Stock
              110 White Index
              12pt C1S Cover
              20 White Opaque Bond
              50 Colored Offset
              50 White Offset
              50 White Opaque
              60 Cover Stock
              60 White Offset
              80 Gloss Cover
              80 Gloss Text
              8pt C1S White
              90 White Index
              CoverText Ink
              Black
              Black + 1 PMS color Type in PMS color
              Black + 2 PMS colors Type in PMS colors
              4 color
              4 color over black
              4 color + 1 PMS color Type in PMS color
              4 color over black + 1 PMS color Type in PMS color
              4 color + 2 PMS colors Type in PMS colors
              4 color + aqueous
              4 color + varnish
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Cannot use quote symbol that is---- Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information White RRD must provide this information NA NA NA NA NA NA 85 11 SIDE NA NA NA NA HALF 85 x 11 50 RRD must provide this information
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B NA PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information GLOSS TEXT 80 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA NA NA NA HALF 85 x 11 RRD must provide this information
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              EA 1 1 See DocMan for the Cost Center selections associated with each Business Group Black amp White B PERFECT PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 2 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA 516 3LEFT NA NA NA NA RRD must provide this information Cover Stock = 90 White IndexText Stock = 20 White Opaque BondCover Ink = BlackText Ink = BlackSpine = If included as last page of PDF
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions EA 1 1 Marketing Commercial Marketing Other November 2008 5 Black amp White B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 4 16 4 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 475 7 SIDE NA NA NA HALF 425 x 7 50 RRD must provide this information Text Stock = 20 White Opaque BondText Ink = Black PN-25192
              Corp 17501
              Bill To 69
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions EA 1 1 Marketing Commercial Marketing Other November 2008 5 Black amp White B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 4 16 4 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 475 7 SIDE NA NA NA HALF 425 x 7 50 RRD must provide this information Text Stock = 20 White Opaque BondText Ink = Black PN-25192
              Details of the Rockwell Automation Print Specifications sheet
              This print specifications sheet is designed with multiple purposes- It is a vehicle to get the most accurate print specifications to RA-approved print vendors- It provides authors with an explanation of all necessary fields to complete before attaching the sheet to your PDF- It provides separate tabs so that an author can fill in all fields related to the publication on the Generic tab or publication-specific template-type tabs to minimize the number of fields an author must completeTo facilitate the most efficient use of this sheet we recommend that you click on the publication-specific tab that most closely fits you publication and use that to complete the print specificationsIMPORTANT Because this sheet was constructed using a sheet that RR Donnelley (RRD) uses to load print specifications there are some columns hidden For example the first field you must complete is Column E or Publication Number Columns A to D are used for RRD purposes and with information only representatives of that RA-approved printer can completeDO NOT delete any hidden columns from the tab you choose to use
              Definitions of Each Tab in Sheet
              Generic pub print specs Single sheet with all required columns for necessary specifications None of the columns are completed All must be completed before attaching the sheet to your PDFThis tab has 39 blank fields you must complete via free text type or pull-down menus
              IN RN pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to installation instructions (IN) and release notes (RN) However you can use this sheet for other publications that are similar to INs and RNsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              UM RM PM pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to user manuals (UM) reference manuals (RM) and programming manuals (PM) However you can use this sheet for other publications that are similar to UMs RMs and PMsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              AP PP pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to application solutions (AP) and product profiles (PP) However you can use this sheet for other publications that are similar to APs and PPsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              BR pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to brochures (BR) However you can use this sheet for other publications that are similar to BRsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              Field definitions Description of information fields used throughout the spreadsheet tabs that may not be immediately obvious to a user
              Attach Print Specs to PDF
              For Acrobat 80 follow these steps1 Open the PDF2 Click on DocumentgtAttach A File A new section appears at the bottom of the PDF3 Browse to the MS Excel file with the print specs and add it to the PDFFor Acrobat 70 follow these steps1 Open the PDF2 Click on the Attachments tab next to the publications bookmarks A new section appears at the bottom of the PDF3 Click on the Add button in the bottom section of the PDF4 Browse to the MS Excel file with the print specs and add it to the PDFFor Acrobat 60 follow these steps1 Open the PDF2 Go to the backcover of the PDF3 Click on the Tools pull-down menu4 Click on this sequence of menu options - Advanced Commenting Attach Attach File Tool A paper clip appears5 Click to put the paper clip somewhere on the backcover The browse window appears6 Browse to the MS Excel file with the print specs and add it to the PDFIMPORTANT If you are using Acrobat 50 or earlier please upgrade
              RA-QR005C-EN-E 608
Page 11: USB-to-ControlNet Cable - Rockwell Automationliterature.rockwellautomation.com/idc/groups/literature/documents/... · USB-to-ControlNet Cable Catalog Number 1784-U2CN Topic Page Important

USB-to-ControlNet Cable 11

Specifications

USB-to-ControlNet Cable Catalog Number 1784-U2CN

Attribute Value

Enclosure type rating Meets IP30

Power dissipation max 05 W

Supply voltage 500V DC 525V DC max

Supply current 75 mA

Power consumption max 05 W

Isolation voltage 30V continuous Basic Insulation Type Type tested at 500V AC for 60 s ControlNet to USB

Wiring category(1)

(1) Use this Conductor Category information for planning conductor routing Refer to Industrial Automation Wiring and Grounding Guidelines publication 1770-41

2 - on communication ports

ControlNet current value 70 mA 24V

Publication 1784-IN047A-EN-P - November 2008

12 USB-to-ControlNet Cable

Environmental Specifications

Attribute Value

Temperature operating

IEC 60068-2-1 (Test Ad Operating Cold) IEC 60068-2-2 (Test Bd Operating Dry Heat) IEC 60068-2-14 (Test Nb Operating Thermal Shock) 0hellip55 degC (32hellip131 degF)

Temperature nonoperating

IEC 60068-2-1 (Test Ab Unpackaged Nonoperating Cold) IEC 60068-2-2 (Test Bb Unpackaged Nonoperating Dry Heat) IEC 60068-2-14 (Test Na Unpackaged Nonoperating Thermal Shock) -10hellip85 degC (14hellip185 degF)

Relative humidity IEC 60068-2-30 (Test Db Unpackaged Damp Heat) 5hellip95 noncondensing

Nonoperating shock IEC 60068-2-27 (Test Ea Unpackaged Shock) 1000 mm (328 ft)

Emissions CISPR 11 Group 1 Class A

ESD immunity IEC 61000-4-2 8 kV air discharges

Radiated RF immunity IEC 61000-4-3 10Vm with 1 kHz sine-wave 80 AM from 80hellip2000 MHz 10Vm with 200 Hz 50 Pulse 100 AM at 900 MHz 10Vm with 200 Hz 50 Pulse 100 AM at 1890 MHz 10Vm with 1 kHz sine-wave 80 AM from 2000hellip2700 MHz

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 13

Certifications

Certifications (when product is marked)(1)

Value

c-UL-us UL Listed Industrial Control Equipment certified for US and Canada See UL File E65584

CE European Union 2004108EC EMC Directive compliant with EN 61326-1 MeasControlLab Industrial Requirements EN 61000-6-2 Industrial Immunity EN 61000-6-4 Industrial Emissions EN 61131-2 Programmable Controllers (Clause 8 Zone A amp B)

C-Tick Australian Radiocommunications Act compliant with ASNZS CISPR 11 Industrial Emissions

CI ControlNet International conformance tested to ControlNet specifications

(1) See the Product Certification link at httpwwwabcom for Declarations of Conformity Certificates and other certification details

Publication 1784-IN047A-EN-P - November 2008

14 USB-to-ControlNet Cable

Additional ResourcesThese documents contain additional information concerning related Rockwell Automation products

Resource Description

ControlNet Coax Media Planning and Installation Guide publication CNET-IN002

Provides ControlNet network planning information

Industrial Automation Wiring and Grounding Guidelines publication 1770-41

Provides general guidelines for installing a Rockwell Automation industrial system

Product Certifications website httpwwwabcom

Provides declarations of conformity certificates and other certification details

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 15

Notes

Publication 1784-IN047A-EN-P - November 2008

Rockwell Automation SupportRockwell Automation provides technical information on the Web to assist you in using its products At httpsupportrockwellautomationcom you can find technical manuals a knowledge base of FAQs technical and application notes sample code and links to software service packs and a MySupport feature that you can customize to make the best use of these tools

For an additional level of technical phone support for installation configuration and troubleshooting we offer TechConnect support programs For more information contact your local distributor or Rockwell Automation representative or visit httpsupportrockwellautomationcom

Installation Assistance

If you experience a problem within the first 24 hours of installation please review the information thats contained in this manual You can also contact a special Customer Support number for initial help in getting your product up and running

New Product Satisfaction Return

Rockwell Automation tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility However if your product is not functioning and needs to be returned follow these procedures

Allen-Bradley Data Highway Plus DH+ PLC-5 RSLinx Rockwell Automation SLC and TechConnect are trademarks of Rockwell Automation Inc

Trademarks not belonging to Rockwell Automation are property of their respective companies

United States 14406463434 Monday ndash Friday 8 am ndash 5 pm EST

Outside United States Please contact your local Rockwell Automation representative for any technical support issues

United States Contact your distributor You must provide a Customer Support case number (see phone number above to obtain one) to your distributor in order to complete the return process

Outside United States Please contact your local Rockwell Automation representative for the return procedure

Publication 1784-IN047A-EN-P - November 2008 PN-25192Copyright copy 2008 Rockwell Automation Inc All rights reserved Printed in the USA

  • Publication 1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions
    • Important User Information
    • Environment and Enclosure
    • About the Cable
    • Install the Cable
      • Obtain the Device Driver for the Cable
      • Configure and Connect the Cable
      • Traffic Analyzer Software
      • Product Dimensions
        • Status Indicators
        • Specifications
        • Additional Resources
        • Back Cover

            • ltlt ASCII85EncodePages false AllowTransparency false AutoPositionEPSFiles false AutoRotatePages None Binding Left CalGrayProfile (Gray Gamma 22) CalRGBProfile (sRGB IEC61966-21) CalCMYKProfile (Euroscale Uncoated v2) sRGBProfile (sRGB IEC61966-21) CannotEmbedFontPolicy Error CompatibilityLevel 14 CompressObjects Tags CompressPages true ConvertImagesToIndexed true PassThroughJPEGImages true CreateJDFFile false CreateJobTicket true DefaultRenderingIntent Default DetectBlends true DetectCurves 00000 ColorConversionStrategy LeaveColorUnchanged DoThumbnails false EmbedAllFonts true EmbedOpenType false ParseICCProfilesInComments true EmbedJobOptions true DSCReportingLevel 0 EmitDSCWarnings false EndPage -1 ImageMemory 1048576 LockDistillerParams true MaxSubsetPct 99 Optimize true OPM 1 ParseDSCComments false ParseDSCCommentsForDocInfo false PreserveCopyPage true PreserveDICMYKValues true PreserveEPSInfo false PreserveFlatness true PreserveHalftoneInfo true PreserveOPIComments false PreserveOverprintSettings true StartPage 1 SubsetFonts false TransferFunctionInfo Apply UCRandBGInfo Preserve UsePrologue false ColorSettingsFile (None) AlwaysEmbed [ true ArialMT ] NeverEmbed [ true ] AntiAliasColorImages false CropColorImages true ColorImageMinResolution 150 ColorImageMinResolutionPolicy OK DownsampleColorImages true ColorImageDownsampleType Bicubic ColorImageResolution 150 ColorImageDepth 8 ColorImageMinDownsampleDepth 1 ColorImageDownsampleThreshold 100000 EncodeColorImages true ColorImageFilter FlateEncode AutoFilterColorImages false ColorImageAutoFilterStrategy JPEG ColorACSImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt ColorImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt JPEG2000ColorACSImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt JPEG2000ColorImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt AntiAliasGrayImages false CropGrayImages true GrayImageMinResolution 150 GrayImageMinResolutionPolicy OK DownsampleGrayImages true GrayImageDownsampleType Bicubic GrayImageResolution 150 GrayImageDepth 8 GrayImageMinDownsampleDepth 2 GrayImageDownsampleThreshold 100000 EncodeGrayImages true GrayImageFilter FlateEncode AutoFilterGrayImages false GrayImageAutoFilterStrategy JPEG GrayACSImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt GrayImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt JPEG2000GrayACSImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt JPEG2000GrayImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt AntiAliasMonoImages false CropMonoImages true MonoImageMinResolution 900 MonoImageMinResolutionPolicy OK DownsampleMonoImages true MonoImageDownsampleType Bicubic MonoImageResolution 900 MonoImageDepth -1 MonoImageDownsampleThreshold 100000 EncodeMonoImages true MonoImageFilter CCITTFaxEncode MonoImageDict ltlt K -1 gtgt AllowPSXObjects true CheckCompliance [ None ] PDFX1aCheck false PDFX3Check false PDFXCompliantPDFOnly false PDFXNoTrimBoxError true PDFXTrimBoxToMediaBoxOffset [ 000000 000000 000000 000000 ] PDFXSetBleedBoxToMediaBox true PDFXBleedBoxToTrimBoxOffset [ 000000 000000 000000 000000 ] PDFXOutputIntentProfile (None) PDFXOutputConditionIdentifier () PDFXOutputCondition () PDFXRegistryName (httpwwwcolororg) PDFXTrapped False SyntheticBoldness 1000000 Description ltlt JPN ltFEFF3053306e8a2d5b9a306f300130d330b830cd30b9658766f8306e8868793a304a3088307353705237306b90693057305f00200050004400460020658766f830924f5c62103059308b3068304d306b4f7f75283057307e305930023053306e8a2d5b9a30674f5c62103057305f00200050004400460020658766f8306f0020004100630072006f0062006100740020304a30883073002000520065006100640065007200200035002e003000204ee5964d30678868793a3067304d307e30593002gt DEU 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 FRA 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 PTB 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 DAN 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 NLD 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 ESP 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 SUO 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 ITA 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 NOR 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 SVE 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 ENU (Rockwell Job Options for Web-only PDF Files) gtgtgtgt setdistillerparamsltlt HWResolution [2540 2540] PageSize [792000 1224000]gtgt setpagedevice

              Intro

              ampLRA-QR005B-EN-E 308

              Generic pub print specs

              ampCItem Setup Sheet for Conversion Transfers
              ampLJIT-D-print SpreadsheetampCRA-QR005C-EN-EampRampD ampT

              IN RN pub type specs

              UM RM PM pub type specs

              AP PP pub type specs

              BR pub type specs

              Field definitions

              ampL04032006ampRampP
              PackagingOrdering Unit Of Measure
              EA = Each
              PK = Pack
              PD = Pad
              RL = Roll
              BK = Book
              CT = Carton
              BX = Box
              ST = Set
              Multiple Order Qty
              Separate methods of ordering same item For example if an item is packaged 50 per pad 5 pads per carton You can set the order qty as 50 each (one pad) or 250 each (1 ctn)
              Business Group
              The business group that the publication supports Your choice here determines the list you choose from for Cost Center
              CorporateBusiness Development
              Finance
              Human Resources
              IT
              Logistics
              Manufacturing
              Marketing Commercial
              Marketing Europe
              Marketing Other
              Operations
              Order Services
              Other
              Process Improvement
              Procurement
              Quality
              Sales
              Max Order Quantity
              Presale items = 100
              Postsale items = 5
              NOTE You can use other quantities but the delivery may take a bit longer because a system admin must approve it
              Item Category - Form (F) or Book (B)
              Form (F) = Any publication that is a single sheet (ie 1 or 2 pages) an envelope or carbonless form
              Book (B) = Any publication that contains 3 or more pages
              BindingStitching
              For a Form (F) use
              CARBONLESS
              CUTSHEET
              ENVELOPE
              For a Book (B) use
              LOOSE LOOSE -Loose Leaf
              PERFECT PERFECT - Perfect Bound
              PLASTCOIL PLASTCOIL - Plastic Coil (Coil Bound)
              SADDLE SADDLE - Saddle Stitch
              STAPLED1 STAPLED1 -1 position
              STAPLED1B STAPLED1B - bottom 1 position
              STAPLED2 STAPLED2 - 2 positions
              THERMAL THERMAL - Thermal bound (Tape bound)
              THERMALO THERMALO - Thermal Bound (Tape bound - offline)
              WIRE O Wire O - Double Wire Bound (offline)
              Saddle-Stitch Items
              20 sheets max on 20 (text and cover)
              19 sheets max on 20 (text) and 24 (cover)
              18 sheets max on 24 (text and cover)
              All page quantities must be divisible by 4
              Tape Bound Items
              125 sheets max on 20 no cover
              120 sheets max wcover (90 index unless indicated otherwise)
              Perfect Bound Items
              475 sheets max on 20 no cover
              470 sheets max wcover (90 index unless indicated otherwise)
              Double Wire Bound Items
              40 sheets max on 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
              Coil Bound Items
              290 sheets max of 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
              Sides Printed
              Head2Head = Most common Double-sided printing with headers on both pages lining up at the top of the page
              Simplex = Single-sided printing
              Head2Toe = Least common Double-sided printing with header on one page lining up with the footer on the other page
              Number of Forms to a Sheet
              Number of publication pages printed on a sheet of paper at the printerFor example if a 4-page 85 x 11 publication is printed on the front and back sides of an 11 x 17 sheet of paper that is folded in half the Number of Forms to a Sheet = 4Example 2 If a 4-page 55 x 85 publication is printed on the front and back sides of an 85 x 11 sheet of paper that is folded in half the Number of forms to a Sheet = 4
              Number of Sheets Required to Print
              Number of sheets of paper required to print the publicationFor example if a 16-page 85 x 11 publication is printed on the front and back sides of four 11 x 17 sheets of paper that are folded in half and saddle stitched together the Number of Sheets Required to Print = 4Example 4 If a 4-page 55 x 85 publication is printed on the front and back sides of one 85 x 11 sheet of paper that is folded in half the Number of Sheets Required to Print = 1
              Paper Stock Type
              Description
              PLAIN Bond
              ACNTCVR Accent Cover
              BOND3H Bond (3-hole)
              BOOKENV Booklet Envelope
              C1SGLOSS C1S Gloss Finish
              C1SMATTE C1S Matt Finish
              C2SGLOSS C2S Gloss Finish
              C2SMATTE C2S Matt Finish
              CARD Card Stock
              CATLGENV Catalog Envelope
              CATLGENV6 6 Catalog Envelope
              COVERCOLOR Color Cover Copy
              CRCKPEEL Crack N Peel Label
              CUSTOM Custom
              CVRFUTURA Futura Cover
              ENV6x9 Standard 6X9 Envelope
              ENV9X12 Standard 9X12 Envelope
              ETHCERT Ethicon Certificate
              GLOSSCOVER Gloss Cover
              GLOSSTEXT Gloss Text
              HOTSTEXT Hots Text
              INDEX Index
              LABEL80 80 Up Label
              MICROPRT Micro Print
              OFFSET Offset
              PART2 2 Part
              PART3 3 Part
              PART4 4 Part
              PART5 5 Part
              PART6 6 Part
              PERF 12 inch Perfed
              PERMMAT Perm Mat Ad
              PRECUTTAB Pre-Cut Tab
              PREPERF Pre-Perforated
              RECYL Recycled
              SE10ENV 10 Standard Envelope
              SE10ITENV 10 Inside Tint Envelope
              SE9ENV 9 Stanard Envelope
              TAG Tag
              TEXT Text
              TEXTCOLOR Text Color Copy
              TEXTFUTURA Futura Text
              TEXTLASER Text Laser Print
              TRANSPRNCY Transparencies
              VELLUM Vellum
              VELLUM3HP Vellum 3HP
              WE10ENV 10 Window Envelope
              WE9ENV 9 Windor Envelope
              WE9ITENV 9 Inside Tint Window Envelope
              Paper Stock Color
              Black
              Blue
              Buff
              Canary
              Cherry
              Clear
              Cream
              Custom
              Goldrenrod
              Gray
              Green
              Ivory
              Lavender
              Manilla
              NCRPinkCanary
              NCRWhiteBlue
              NCRWhiteBlueCanary
              NCRWhiteCanary
              NCRWhiteCanaryPink
              NCRWhiteCanaryPinkGoldenrod
              NCRWhiteGreen
              NCRWhiteGoldenrodYellow
              NCRWhitePink
              NCRWhiteWhite
              Opaque
              Orange
              Orchid
              Peach
              Pink
              Purple
              Salmon
              Tan
              Violet
              White
              Finished Trim Sizes (listed - width x length)
              11 x 17
              18 x 24 Poster
              24 x 36 Poster
              3 x 5
              36 x 24 Poster
              4 x 6
              475 x 7
              475 x 775
              55 x 85
              6 x 4
              7 x 9
              7385 x 9 (RSI Std)
              85 x 11
              825 x 10875
              825 x 11 (RA product profile std)
              8375 x 10875
              9 x 12
              A4
              A5
              Other - Custom size listed below
              Drilling Locations
              1CENTER
              1LEFTTOP
              1TOPCENTER
              2LEFT
              2LEFT2TOP
              2TOP
              2TOP2LEFT
              2TOP3LEFT
              2TOP5LEFT
              2TOP5RIGHT
              3BOTTOM
              3LEFT
              3LEFT2TOP
              3LEFT3TOP
              3RIGHT
              3TOP
              3TOP5LEFT
              5BOTTOM
              5CENTER
              5LEFT
              5RIGHT
              5RIGHT2TOP
              5TOP
              For TRI fold - select Z or C type Description
              HALF Half
              C C Fold
              DBLEPARLL Double Parallel
              OFFSETZ Offset Z
              SAMPLE See Sample
              SHORT Short Fold
              V V Fold
              Z Z Fold
              Number of Pieces per Poly Wrap
              Publication length Number per Poly Wrap
              77 or more pages 1
              33 to 76 pages 25
              3 to 32 pages 50
              1 or 2 pages 100
              Comments
              CoverText Stock Spine
              100 Gloss Cover If your publication uses a spine make note of that in the comments field Be sure to include the spine as the last page of your PDF Do NOT include that page as part of the publication page count Because the addition of a spine will create an odd page count in the PDF contact a Super User to submit your publication via PDFdirect with an exception tool
              100 Gloss Text
              100 Text
              10pt C1S Cover
              10pt C2S Cover
              10pt C2S Text
              10pt Text Stock
              110 White Index
              12pt C1S Cover
              20 White Opaque Bond
              50 Colored Offset
              50 White Offset
              50 White Opaque
              60 Cover Stock
              60 White Offset
              80 Gloss Cover
              80 Gloss Text
              8pt C1S White
              90 White Index
              CoverText Ink
              Black
              Black + 1 PMS color Type in PMS color
              Black + 2 PMS colors Type in PMS colors
              4 color
              4 color over black
              4 color + 1 PMS color Type in PMS color
              4 color over black + 1 PMS color Type in PMS color
              4 color + 2 PMS colors Type in PMS colors
              4 color + aqueous
              4 color + varnish
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Cannot use quote symbol that is---- Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information White RRD must provide this information NA NA NA NA NA NA 85 11 SIDE NA NA NA NA HALF 85 x 11 50 RRD must provide this information
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B NA PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information GLOSS TEXT 80 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA NA NA NA HALF 85 x 11 RRD must provide this information
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              EA 1 1 See DocMan for the Cost Center selections associated with each Business Group Black amp White B PERFECT PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 2 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA 516 3LEFT NA NA NA NA RRD must provide this information Cover Stock = 90 White IndexText Stock = 20 White Opaque BondCover Ink = BlackText Ink = BlackSpine = If included as last page of PDF
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions EA 1 1 Marketing Commercial Marketing Other November 2008 5 Black amp White B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 4 16 4 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 475 7 SIDE NA NA NA HALF 425 x 7 50 RRD must provide this information Text Stock = 20 White Opaque BondText Ink = Black PN-25192
              Corp 17501
              Bill To 69
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions EA 1 1 Marketing Commercial Marketing Other November 2008 5 Black amp White B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 4 16 4 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 475 7 SIDE NA NA NA HALF 425 x 7 50 RRD must provide this information Text Stock = 20 White Opaque BondText Ink = Black PN-25192
              Details of the Rockwell Automation Print Specifications sheet
              This print specifications sheet is designed with multiple purposes- It is a vehicle to get the most accurate print specifications to RA-approved print vendors- It provides authors with an explanation of all necessary fields to complete before attaching the sheet to your PDF- It provides separate tabs so that an author can fill in all fields related to the publication on the Generic tab or publication-specific template-type tabs to minimize the number of fields an author must completeTo facilitate the most efficient use of this sheet we recommend that you click on the publication-specific tab that most closely fits you publication and use that to complete the print specificationsIMPORTANT Because this sheet was constructed using a sheet that RR Donnelley (RRD) uses to load print specifications there are some columns hidden For example the first field you must complete is Column E or Publication Number Columns A to D are used for RRD purposes and with information only representatives of that RA-approved printer can completeDO NOT delete any hidden columns from the tab you choose to use
              Definitions of Each Tab in Sheet
              Generic pub print specs Single sheet with all required columns for necessary specifications None of the columns are completed All must be completed before attaching the sheet to your PDFThis tab has 39 blank fields you must complete via free text type or pull-down menus
              IN RN pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to installation instructions (IN) and release notes (RN) However you can use this sheet for other publications that are similar to INs and RNsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              UM RM PM pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to user manuals (UM) reference manuals (RM) and programming manuals (PM) However you can use this sheet for other publications that are similar to UMs RMs and PMsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              AP PP pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to application solutions (AP) and product profiles (PP) However you can use this sheet for other publications that are similar to APs and PPsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              BR pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to brochures (BR) However you can use this sheet for other publications that are similar to BRsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              Field definitions Description of information fields used throughout the spreadsheet tabs that may not be immediately obvious to a user
              Attach Print Specs to PDF
              For Acrobat 80 follow these steps1 Open the PDF2 Click on DocumentgtAttach A File A new section appears at the bottom of the PDF3 Browse to the MS Excel file with the print specs and add it to the PDFFor Acrobat 70 follow these steps1 Open the PDF2 Click on the Attachments tab next to the publications bookmarks A new section appears at the bottom of the PDF3 Click on the Add button in the bottom section of the PDF4 Browse to the MS Excel file with the print specs and add it to the PDFFor Acrobat 60 follow these steps1 Open the PDF2 Go to the backcover of the PDF3 Click on the Tools pull-down menu4 Click on this sequence of menu options - Advanced Commenting Attach Attach File Tool A paper clip appears5 Click to put the paper clip somewhere on the backcover The browse window appears6 Browse to the MS Excel file with the print specs and add it to the PDFIMPORTANT If you are using Acrobat 50 or earlier please upgrade
              RA-QR005C-EN-E 608
Page 12: USB-to-ControlNet Cable - Rockwell Automationliterature.rockwellautomation.com/idc/groups/literature/documents/... · USB-to-ControlNet Cable Catalog Number 1784-U2CN Topic Page Important

12 USB-to-ControlNet Cable

Environmental Specifications

Attribute Value

Temperature operating

IEC 60068-2-1 (Test Ad Operating Cold) IEC 60068-2-2 (Test Bd Operating Dry Heat) IEC 60068-2-14 (Test Nb Operating Thermal Shock) 0hellip55 degC (32hellip131 degF)

Temperature nonoperating

IEC 60068-2-1 (Test Ab Unpackaged Nonoperating Cold) IEC 60068-2-2 (Test Bb Unpackaged Nonoperating Dry Heat) IEC 60068-2-14 (Test Na Unpackaged Nonoperating Thermal Shock) -10hellip85 degC (14hellip185 degF)

Relative humidity IEC 60068-2-30 (Test Db Unpackaged Damp Heat) 5hellip95 noncondensing

Nonoperating shock IEC 60068-2-27 (Test Ea Unpackaged Shock) 1000 mm (328 ft)

Emissions CISPR 11 Group 1 Class A

ESD immunity IEC 61000-4-2 8 kV air discharges

Radiated RF immunity IEC 61000-4-3 10Vm with 1 kHz sine-wave 80 AM from 80hellip2000 MHz 10Vm with 200 Hz 50 Pulse 100 AM at 900 MHz 10Vm with 200 Hz 50 Pulse 100 AM at 1890 MHz 10Vm with 1 kHz sine-wave 80 AM from 2000hellip2700 MHz

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 13

Certifications

Certifications (when product is marked)(1)

Value

c-UL-us UL Listed Industrial Control Equipment certified for US and Canada See UL File E65584

CE European Union 2004108EC EMC Directive compliant with EN 61326-1 MeasControlLab Industrial Requirements EN 61000-6-2 Industrial Immunity EN 61000-6-4 Industrial Emissions EN 61131-2 Programmable Controllers (Clause 8 Zone A amp B)

C-Tick Australian Radiocommunications Act compliant with ASNZS CISPR 11 Industrial Emissions

CI ControlNet International conformance tested to ControlNet specifications

(1) See the Product Certification link at httpwwwabcom for Declarations of Conformity Certificates and other certification details

Publication 1784-IN047A-EN-P - November 2008

14 USB-to-ControlNet Cable

Additional ResourcesThese documents contain additional information concerning related Rockwell Automation products

Resource Description

ControlNet Coax Media Planning and Installation Guide publication CNET-IN002

Provides ControlNet network planning information

Industrial Automation Wiring and Grounding Guidelines publication 1770-41

Provides general guidelines for installing a Rockwell Automation industrial system

Product Certifications website httpwwwabcom

Provides declarations of conformity certificates and other certification details

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 15

Notes

Publication 1784-IN047A-EN-P - November 2008

Rockwell Automation SupportRockwell Automation provides technical information on the Web to assist you in using its products At httpsupportrockwellautomationcom you can find technical manuals a knowledge base of FAQs technical and application notes sample code and links to software service packs and a MySupport feature that you can customize to make the best use of these tools

For an additional level of technical phone support for installation configuration and troubleshooting we offer TechConnect support programs For more information contact your local distributor or Rockwell Automation representative or visit httpsupportrockwellautomationcom

Installation Assistance

If you experience a problem within the first 24 hours of installation please review the information thats contained in this manual You can also contact a special Customer Support number for initial help in getting your product up and running

New Product Satisfaction Return

Rockwell Automation tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility However if your product is not functioning and needs to be returned follow these procedures

Allen-Bradley Data Highway Plus DH+ PLC-5 RSLinx Rockwell Automation SLC and TechConnect are trademarks of Rockwell Automation Inc

Trademarks not belonging to Rockwell Automation are property of their respective companies

United States 14406463434 Monday ndash Friday 8 am ndash 5 pm EST

Outside United States Please contact your local Rockwell Automation representative for any technical support issues

United States Contact your distributor You must provide a Customer Support case number (see phone number above to obtain one) to your distributor in order to complete the return process

Outside United States Please contact your local Rockwell Automation representative for the return procedure

Publication 1784-IN047A-EN-P - November 2008 PN-25192Copyright copy 2008 Rockwell Automation Inc All rights reserved Printed in the USA

  • Publication 1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions
    • Important User Information
    • Environment and Enclosure
    • About the Cable
    • Install the Cable
      • Obtain the Device Driver for the Cable
      • Configure and Connect the Cable
      • Traffic Analyzer Software
      • Product Dimensions
        • Status Indicators
        • Specifications
        • Additional Resources
        • Back Cover

            • ltlt ASCII85EncodePages false AllowTransparency false AutoPositionEPSFiles false AutoRotatePages None Binding Left CalGrayProfile (Gray Gamma 22) CalRGBProfile (sRGB IEC61966-21) CalCMYKProfile (Euroscale Uncoated v2) sRGBProfile (sRGB IEC61966-21) CannotEmbedFontPolicy Error CompatibilityLevel 14 CompressObjects Tags CompressPages true ConvertImagesToIndexed true PassThroughJPEGImages true CreateJDFFile false CreateJobTicket true DefaultRenderingIntent Default DetectBlends true DetectCurves 00000 ColorConversionStrategy LeaveColorUnchanged DoThumbnails false EmbedAllFonts true EmbedOpenType false ParseICCProfilesInComments true EmbedJobOptions true DSCReportingLevel 0 EmitDSCWarnings false EndPage -1 ImageMemory 1048576 LockDistillerParams true MaxSubsetPct 99 Optimize true OPM 1 ParseDSCComments false ParseDSCCommentsForDocInfo false PreserveCopyPage true PreserveDICMYKValues true PreserveEPSInfo false PreserveFlatness true PreserveHalftoneInfo true PreserveOPIComments false PreserveOverprintSettings true StartPage 1 SubsetFonts false TransferFunctionInfo Apply UCRandBGInfo Preserve UsePrologue false ColorSettingsFile (None) AlwaysEmbed [ true ArialMT ] NeverEmbed [ true ] AntiAliasColorImages false CropColorImages true ColorImageMinResolution 150 ColorImageMinResolutionPolicy OK DownsampleColorImages true ColorImageDownsampleType Bicubic ColorImageResolution 150 ColorImageDepth 8 ColorImageMinDownsampleDepth 1 ColorImageDownsampleThreshold 100000 EncodeColorImages true ColorImageFilter FlateEncode AutoFilterColorImages false ColorImageAutoFilterStrategy JPEG ColorACSImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt ColorImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt JPEG2000ColorACSImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt JPEG2000ColorImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt AntiAliasGrayImages false CropGrayImages true GrayImageMinResolution 150 GrayImageMinResolutionPolicy OK DownsampleGrayImages true GrayImageDownsampleType Bicubic GrayImageResolution 150 GrayImageDepth 8 GrayImageMinDownsampleDepth 2 GrayImageDownsampleThreshold 100000 EncodeGrayImages true GrayImageFilter FlateEncode AutoFilterGrayImages false GrayImageAutoFilterStrategy JPEG GrayACSImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt GrayImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt JPEG2000GrayACSImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt JPEG2000GrayImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt AntiAliasMonoImages false CropMonoImages true MonoImageMinResolution 900 MonoImageMinResolutionPolicy OK DownsampleMonoImages true MonoImageDownsampleType Bicubic MonoImageResolution 900 MonoImageDepth -1 MonoImageDownsampleThreshold 100000 EncodeMonoImages true MonoImageFilter CCITTFaxEncode MonoImageDict ltlt K -1 gtgt AllowPSXObjects true CheckCompliance [ None ] PDFX1aCheck false PDFX3Check false PDFXCompliantPDFOnly false PDFXNoTrimBoxError true PDFXTrimBoxToMediaBoxOffset [ 000000 000000 000000 000000 ] PDFXSetBleedBoxToMediaBox true PDFXBleedBoxToTrimBoxOffset [ 000000 000000 000000 000000 ] PDFXOutputIntentProfile (None) PDFXOutputConditionIdentifier () PDFXOutputCondition () PDFXRegistryName (httpwwwcolororg) PDFXTrapped False SyntheticBoldness 1000000 Description ltlt JPN ltFEFF3053306e8a2d5b9a306f300130d330b830cd30b9658766f8306e8868793a304a3088307353705237306b90693057305f00200050004400460020658766f830924f5c62103059308b3068304d306b4f7f75283057307e305930023053306e8a2d5b9a30674f5c62103057305f00200050004400460020658766f8306f0020004100630072006f0062006100740020304a30883073002000520065006100640065007200200035002e003000204ee5964d30678868793a3067304d307e30593002gt DEU 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 FRA 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 PTB 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 DAN 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 NLD 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 ESP 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 SUO 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 ITA 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 NOR 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 SVE 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 ENU (Rockwell Job Options for Web-only PDF Files) gtgtgtgt setdistillerparamsltlt HWResolution [2540 2540] PageSize [792000 1224000]gtgt setpagedevice

              Intro

              ampLRA-QR005B-EN-E 308

              Generic pub print specs

              ampCItem Setup Sheet for Conversion Transfers
              ampLJIT-D-print SpreadsheetampCRA-QR005C-EN-EampRampD ampT

              IN RN pub type specs

              UM RM PM pub type specs

              AP PP pub type specs

              BR pub type specs

              Field definitions

              ampL04032006ampRampP
              PackagingOrdering Unit Of Measure
              EA = Each
              PK = Pack
              PD = Pad
              RL = Roll
              BK = Book
              CT = Carton
              BX = Box
              ST = Set
              Multiple Order Qty
              Separate methods of ordering same item For example if an item is packaged 50 per pad 5 pads per carton You can set the order qty as 50 each (one pad) or 250 each (1 ctn)
              Business Group
              The business group that the publication supports Your choice here determines the list you choose from for Cost Center
              CorporateBusiness Development
              Finance
              Human Resources
              IT
              Logistics
              Manufacturing
              Marketing Commercial
              Marketing Europe
              Marketing Other
              Operations
              Order Services
              Other
              Process Improvement
              Procurement
              Quality
              Sales
              Max Order Quantity
              Presale items = 100
              Postsale items = 5
              NOTE You can use other quantities but the delivery may take a bit longer because a system admin must approve it
              Item Category - Form (F) or Book (B)
              Form (F) = Any publication that is a single sheet (ie 1 or 2 pages) an envelope or carbonless form
              Book (B) = Any publication that contains 3 or more pages
              BindingStitching
              For a Form (F) use
              CARBONLESS
              CUTSHEET
              ENVELOPE
              For a Book (B) use
              LOOSE LOOSE -Loose Leaf
              PERFECT PERFECT - Perfect Bound
              PLASTCOIL PLASTCOIL - Plastic Coil (Coil Bound)
              SADDLE SADDLE - Saddle Stitch
              STAPLED1 STAPLED1 -1 position
              STAPLED1B STAPLED1B - bottom 1 position
              STAPLED2 STAPLED2 - 2 positions
              THERMAL THERMAL - Thermal bound (Tape bound)
              THERMALO THERMALO - Thermal Bound (Tape bound - offline)
              WIRE O Wire O - Double Wire Bound (offline)
              Saddle-Stitch Items
              20 sheets max on 20 (text and cover)
              19 sheets max on 20 (text) and 24 (cover)
              18 sheets max on 24 (text and cover)
              All page quantities must be divisible by 4
              Tape Bound Items
              125 sheets max on 20 no cover
              120 sheets max wcover (90 index unless indicated otherwise)
              Perfect Bound Items
              475 sheets max on 20 no cover
              470 sheets max wcover (90 index unless indicated otherwise)
              Double Wire Bound Items
              40 sheets max on 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
              Coil Bound Items
              290 sheets max of 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
              Sides Printed
              Head2Head = Most common Double-sided printing with headers on both pages lining up at the top of the page
              Simplex = Single-sided printing
              Head2Toe = Least common Double-sided printing with header on one page lining up with the footer on the other page
              Number of Forms to a Sheet
              Number of publication pages printed on a sheet of paper at the printerFor example if a 4-page 85 x 11 publication is printed on the front and back sides of an 11 x 17 sheet of paper that is folded in half the Number of Forms to a Sheet = 4Example 2 If a 4-page 55 x 85 publication is printed on the front and back sides of an 85 x 11 sheet of paper that is folded in half the Number of forms to a Sheet = 4
              Number of Sheets Required to Print
              Number of sheets of paper required to print the publicationFor example if a 16-page 85 x 11 publication is printed on the front and back sides of four 11 x 17 sheets of paper that are folded in half and saddle stitched together the Number of Sheets Required to Print = 4Example 4 If a 4-page 55 x 85 publication is printed on the front and back sides of one 85 x 11 sheet of paper that is folded in half the Number of Sheets Required to Print = 1
              Paper Stock Type
              Description
              PLAIN Bond
              ACNTCVR Accent Cover
              BOND3H Bond (3-hole)
              BOOKENV Booklet Envelope
              C1SGLOSS C1S Gloss Finish
              C1SMATTE C1S Matt Finish
              C2SGLOSS C2S Gloss Finish
              C2SMATTE C2S Matt Finish
              CARD Card Stock
              CATLGENV Catalog Envelope
              CATLGENV6 6 Catalog Envelope
              COVERCOLOR Color Cover Copy
              CRCKPEEL Crack N Peel Label
              CUSTOM Custom
              CVRFUTURA Futura Cover
              ENV6x9 Standard 6X9 Envelope
              ENV9X12 Standard 9X12 Envelope
              ETHCERT Ethicon Certificate
              GLOSSCOVER Gloss Cover
              GLOSSTEXT Gloss Text
              HOTSTEXT Hots Text
              INDEX Index
              LABEL80 80 Up Label
              MICROPRT Micro Print
              OFFSET Offset
              PART2 2 Part
              PART3 3 Part
              PART4 4 Part
              PART5 5 Part
              PART6 6 Part
              PERF 12 inch Perfed
              PERMMAT Perm Mat Ad
              PRECUTTAB Pre-Cut Tab
              PREPERF Pre-Perforated
              RECYL Recycled
              SE10ENV 10 Standard Envelope
              SE10ITENV 10 Inside Tint Envelope
              SE9ENV 9 Stanard Envelope
              TAG Tag
              TEXT Text
              TEXTCOLOR Text Color Copy
              TEXTFUTURA Futura Text
              TEXTLASER Text Laser Print
              TRANSPRNCY Transparencies
              VELLUM Vellum
              VELLUM3HP Vellum 3HP
              WE10ENV 10 Window Envelope
              WE9ENV 9 Windor Envelope
              WE9ITENV 9 Inside Tint Window Envelope
              Paper Stock Color
              Black
              Blue
              Buff
              Canary
              Cherry
              Clear
              Cream
              Custom
              Goldrenrod
              Gray
              Green
              Ivory
              Lavender
              Manilla
              NCRPinkCanary
              NCRWhiteBlue
              NCRWhiteBlueCanary
              NCRWhiteCanary
              NCRWhiteCanaryPink
              NCRWhiteCanaryPinkGoldenrod
              NCRWhiteGreen
              NCRWhiteGoldenrodYellow
              NCRWhitePink
              NCRWhiteWhite
              Opaque
              Orange
              Orchid
              Peach
              Pink
              Purple
              Salmon
              Tan
              Violet
              White
              Finished Trim Sizes (listed - width x length)
              11 x 17
              18 x 24 Poster
              24 x 36 Poster
              3 x 5
              36 x 24 Poster
              4 x 6
              475 x 7
              475 x 775
              55 x 85
              6 x 4
              7 x 9
              7385 x 9 (RSI Std)
              85 x 11
              825 x 10875
              825 x 11 (RA product profile std)
              8375 x 10875
              9 x 12
              A4
              A5
              Other - Custom size listed below
              Drilling Locations
              1CENTER
              1LEFTTOP
              1TOPCENTER
              2LEFT
              2LEFT2TOP
              2TOP
              2TOP2LEFT
              2TOP3LEFT
              2TOP5LEFT
              2TOP5RIGHT
              3BOTTOM
              3LEFT
              3LEFT2TOP
              3LEFT3TOP
              3RIGHT
              3TOP
              3TOP5LEFT
              5BOTTOM
              5CENTER
              5LEFT
              5RIGHT
              5RIGHT2TOP
              5TOP
              For TRI fold - select Z or C type Description
              HALF Half
              C C Fold
              DBLEPARLL Double Parallel
              OFFSETZ Offset Z
              SAMPLE See Sample
              SHORT Short Fold
              V V Fold
              Z Z Fold
              Number of Pieces per Poly Wrap
              Publication length Number per Poly Wrap
              77 or more pages 1
              33 to 76 pages 25
              3 to 32 pages 50
              1 or 2 pages 100
              Comments
              CoverText Stock Spine
              100 Gloss Cover If your publication uses a spine make note of that in the comments field Be sure to include the spine as the last page of your PDF Do NOT include that page as part of the publication page count Because the addition of a spine will create an odd page count in the PDF contact a Super User to submit your publication via PDFdirect with an exception tool
              100 Gloss Text
              100 Text
              10pt C1S Cover
              10pt C2S Cover
              10pt C2S Text
              10pt Text Stock
              110 White Index
              12pt C1S Cover
              20 White Opaque Bond
              50 Colored Offset
              50 White Offset
              50 White Opaque
              60 Cover Stock
              60 White Offset
              80 Gloss Cover
              80 Gloss Text
              8pt C1S White
              90 White Index
              CoverText Ink
              Black
              Black + 1 PMS color Type in PMS color
              Black + 2 PMS colors Type in PMS colors
              4 color
              4 color over black
              4 color + 1 PMS color Type in PMS color
              4 color over black + 1 PMS color Type in PMS color
              4 color + 2 PMS colors Type in PMS colors
              4 color + aqueous
              4 color + varnish
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Cannot use quote symbol that is---- Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information White RRD must provide this information NA NA NA NA NA NA 85 11 SIDE NA NA NA NA HALF 85 x 11 50 RRD must provide this information
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B NA PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information GLOSS TEXT 80 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA NA NA NA HALF 85 x 11 RRD must provide this information
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              EA 1 1 See DocMan for the Cost Center selections associated with each Business Group Black amp White B PERFECT PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 2 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA 516 3LEFT NA NA NA NA RRD must provide this information Cover Stock = 90 White IndexText Stock = 20 White Opaque BondCover Ink = BlackText Ink = BlackSpine = If included as last page of PDF
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions EA 1 1 Marketing Commercial Marketing Other November 2008 5 Black amp White B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 4 16 4 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 475 7 SIDE NA NA NA HALF 425 x 7 50 RRD must provide this information Text Stock = 20 White Opaque BondText Ink = Black PN-25192
              Corp 17501
              Bill To 69
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions EA 1 1 Marketing Commercial Marketing Other November 2008 5 Black amp White B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 4 16 4 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 475 7 SIDE NA NA NA HALF 425 x 7 50 RRD must provide this information Text Stock = 20 White Opaque BondText Ink = Black PN-25192
              Details of the Rockwell Automation Print Specifications sheet
              This print specifications sheet is designed with multiple purposes- It is a vehicle to get the most accurate print specifications to RA-approved print vendors- It provides authors with an explanation of all necessary fields to complete before attaching the sheet to your PDF- It provides separate tabs so that an author can fill in all fields related to the publication on the Generic tab or publication-specific template-type tabs to minimize the number of fields an author must completeTo facilitate the most efficient use of this sheet we recommend that you click on the publication-specific tab that most closely fits you publication and use that to complete the print specificationsIMPORTANT Because this sheet was constructed using a sheet that RR Donnelley (RRD) uses to load print specifications there are some columns hidden For example the first field you must complete is Column E or Publication Number Columns A to D are used for RRD purposes and with information only representatives of that RA-approved printer can completeDO NOT delete any hidden columns from the tab you choose to use
              Definitions of Each Tab in Sheet
              Generic pub print specs Single sheet with all required columns for necessary specifications None of the columns are completed All must be completed before attaching the sheet to your PDFThis tab has 39 blank fields you must complete via free text type or pull-down menus
              IN RN pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to installation instructions (IN) and release notes (RN) However you can use this sheet for other publications that are similar to INs and RNsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              UM RM PM pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to user manuals (UM) reference manuals (RM) and programming manuals (PM) However you can use this sheet for other publications that are similar to UMs RMs and PMsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              AP PP pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to application solutions (AP) and product profiles (PP) However you can use this sheet for other publications that are similar to APs and PPsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              BR pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to brochures (BR) However you can use this sheet for other publications that are similar to BRsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              Field definitions Description of information fields used throughout the spreadsheet tabs that may not be immediately obvious to a user
              Attach Print Specs to PDF
              For Acrobat 80 follow these steps1 Open the PDF2 Click on DocumentgtAttach A File A new section appears at the bottom of the PDF3 Browse to the MS Excel file with the print specs and add it to the PDFFor Acrobat 70 follow these steps1 Open the PDF2 Click on the Attachments tab next to the publications bookmarks A new section appears at the bottom of the PDF3 Click on the Add button in the bottom section of the PDF4 Browse to the MS Excel file with the print specs and add it to the PDFFor Acrobat 60 follow these steps1 Open the PDF2 Go to the backcover of the PDF3 Click on the Tools pull-down menu4 Click on this sequence of menu options - Advanced Commenting Attach Attach File Tool A paper clip appears5 Click to put the paper clip somewhere on the backcover The browse window appears6 Browse to the MS Excel file with the print specs and add it to the PDFIMPORTANT If you are using Acrobat 50 or earlier please upgrade
              RA-QR005C-EN-E 608
Page 13: USB-to-ControlNet Cable - Rockwell Automationliterature.rockwellautomation.com/idc/groups/literature/documents/... · USB-to-ControlNet Cable Catalog Number 1784-U2CN Topic Page Important

USB-to-ControlNet Cable 13

Certifications

Certifications (when product is marked)(1)

Value

c-UL-us UL Listed Industrial Control Equipment certified for US and Canada See UL File E65584

CE European Union 2004108EC EMC Directive compliant with EN 61326-1 MeasControlLab Industrial Requirements EN 61000-6-2 Industrial Immunity EN 61000-6-4 Industrial Emissions EN 61131-2 Programmable Controllers (Clause 8 Zone A amp B)

C-Tick Australian Radiocommunications Act compliant with ASNZS CISPR 11 Industrial Emissions

CI ControlNet International conformance tested to ControlNet specifications

(1) See the Product Certification link at httpwwwabcom for Declarations of Conformity Certificates and other certification details

Publication 1784-IN047A-EN-P - November 2008

14 USB-to-ControlNet Cable

Additional ResourcesThese documents contain additional information concerning related Rockwell Automation products

Resource Description

ControlNet Coax Media Planning and Installation Guide publication CNET-IN002

Provides ControlNet network planning information

Industrial Automation Wiring and Grounding Guidelines publication 1770-41

Provides general guidelines for installing a Rockwell Automation industrial system

Product Certifications website httpwwwabcom

Provides declarations of conformity certificates and other certification details

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 15

Notes

Publication 1784-IN047A-EN-P - November 2008

Rockwell Automation SupportRockwell Automation provides technical information on the Web to assist you in using its products At httpsupportrockwellautomationcom you can find technical manuals a knowledge base of FAQs technical and application notes sample code and links to software service packs and a MySupport feature that you can customize to make the best use of these tools

For an additional level of technical phone support for installation configuration and troubleshooting we offer TechConnect support programs For more information contact your local distributor or Rockwell Automation representative or visit httpsupportrockwellautomationcom

Installation Assistance

If you experience a problem within the first 24 hours of installation please review the information thats contained in this manual You can also contact a special Customer Support number for initial help in getting your product up and running

New Product Satisfaction Return

Rockwell Automation tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility However if your product is not functioning and needs to be returned follow these procedures

Allen-Bradley Data Highway Plus DH+ PLC-5 RSLinx Rockwell Automation SLC and TechConnect are trademarks of Rockwell Automation Inc

Trademarks not belonging to Rockwell Automation are property of their respective companies

United States 14406463434 Monday ndash Friday 8 am ndash 5 pm EST

Outside United States Please contact your local Rockwell Automation representative for any technical support issues

United States Contact your distributor You must provide a Customer Support case number (see phone number above to obtain one) to your distributor in order to complete the return process

Outside United States Please contact your local Rockwell Automation representative for the return procedure

Publication 1784-IN047A-EN-P - November 2008 PN-25192Copyright copy 2008 Rockwell Automation Inc All rights reserved Printed in the USA

  • Publication 1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions
    • Important User Information
    • Environment and Enclosure
    • About the Cable
    • Install the Cable
      • Obtain the Device Driver for the Cable
      • Configure and Connect the Cable
      • Traffic Analyzer Software
      • Product Dimensions
        • Status Indicators
        • Specifications
        • Additional Resources
        • Back Cover

            • ltlt ASCII85EncodePages false AllowTransparency false AutoPositionEPSFiles false AutoRotatePages None Binding Left CalGrayProfile (Gray Gamma 22) CalRGBProfile (sRGB IEC61966-21) CalCMYKProfile (Euroscale Uncoated v2) sRGBProfile (sRGB IEC61966-21) CannotEmbedFontPolicy Error CompatibilityLevel 14 CompressObjects Tags CompressPages true ConvertImagesToIndexed true PassThroughJPEGImages true CreateJDFFile false CreateJobTicket true DefaultRenderingIntent Default DetectBlends true DetectCurves 00000 ColorConversionStrategy LeaveColorUnchanged DoThumbnails false EmbedAllFonts true EmbedOpenType false ParseICCProfilesInComments true EmbedJobOptions true DSCReportingLevel 0 EmitDSCWarnings false EndPage -1 ImageMemory 1048576 LockDistillerParams true MaxSubsetPct 99 Optimize true OPM 1 ParseDSCComments false ParseDSCCommentsForDocInfo false PreserveCopyPage true PreserveDICMYKValues true PreserveEPSInfo false PreserveFlatness true PreserveHalftoneInfo true PreserveOPIComments false PreserveOverprintSettings true StartPage 1 SubsetFonts false TransferFunctionInfo Apply UCRandBGInfo Preserve UsePrologue false ColorSettingsFile (None) AlwaysEmbed [ true ArialMT ] NeverEmbed [ true ] AntiAliasColorImages false CropColorImages true ColorImageMinResolution 150 ColorImageMinResolutionPolicy OK DownsampleColorImages true ColorImageDownsampleType Bicubic ColorImageResolution 150 ColorImageDepth 8 ColorImageMinDownsampleDepth 1 ColorImageDownsampleThreshold 100000 EncodeColorImages true ColorImageFilter FlateEncode AutoFilterColorImages false ColorImageAutoFilterStrategy JPEG ColorACSImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt ColorImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt JPEG2000ColorACSImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt JPEG2000ColorImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt AntiAliasGrayImages false CropGrayImages true GrayImageMinResolution 150 GrayImageMinResolutionPolicy OK DownsampleGrayImages true GrayImageDownsampleType Bicubic GrayImageResolution 150 GrayImageDepth 8 GrayImageMinDownsampleDepth 2 GrayImageDownsampleThreshold 100000 EncodeGrayImages true GrayImageFilter FlateEncode AutoFilterGrayImages false GrayImageAutoFilterStrategy JPEG GrayACSImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt GrayImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt JPEG2000GrayACSImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt JPEG2000GrayImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt AntiAliasMonoImages false CropMonoImages true MonoImageMinResolution 900 MonoImageMinResolutionPolicy OK DownsampleMonoImages true MonoImageDownsampleType Bicubic MonoImageResolution 900 MonoImageDepth -1 MonoImageDownsampleThreshold 100000 EncodeMonoImages true MonoImageFilter CCITTFaxEncode MonoImageDict ltlt K -1 gtgt AllowPSXObjects true CheckCompliance [ None ] PDFX1aCheck false PDFX3Check false PDFXCompliantPDFOnly false PDFXNoTrimBoxError true PDFXTrimBoxToMediaBoxOffset [ 000000 000000 000000 000000 ] PDFXSetBleedBoxToMediaBox true PDFXBleedBoxToTrimBoxOffset [ 000000 000000 000000 000000 ] PDFXOutputIntentProfile (None) PDFXOutputConditionIdentifier () PDFXOutputCondition () PDFXRegistryName (httpwwwcolororg) PDFXTrapped False SyntheticBoldness 1000000 Description ltlt JPN ltFEFF3053306e8a2d5b9a306f300130d330b830cd30b9658766f8306e8868793a304a3088307353705237306b90693057305f00200050004400460020658766f830924f5c62103059308b3068304d306b4f7f75283057307e305930023053306e8a2d5b9a30674f5c62103057305f00200050004400460020658766f8306f0020004100630072006f0062006100740020304a30883073002000520065006100640065007200200035002e003000204ee5964d30678868793a3067304d307e30593002gt DEU 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 FRA 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 PTB 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 DAN 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 NLD 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 ESP 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 SUO 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 ITA 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 NOR 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 SVE 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 ENU (Rockwell Job Options for Web-only PDF Files) gtgtgtgt setdistillerparamsltlt HWResolution [2540 2540] PageSize [792000 1224000]gtgt setpagedevice

              Intro

              ampLRA-QR005B-EN-E 308

              Generic pub print specs

              ampCItem Setup Sheet for Conversion Transfers
              ampLJIT-D-print SpreadsheetampCRA-QR005C-EN-EampRampD ampT

              IN RN pub type specs

              UM RM PM pub type specs

              AP PP pub type specs

              BR pub type specs

              Field definitions

              ampL04032006ampRampP
              PackagingOrdering Unit Of Measure
              EA = Each
              PK = Pack
              PD = Pad
              RL = Roll
              BK = Book
              CT = Carton
              BX = Box
              ST = Set
              Multiple Order Qty
              Separate methods of ordering same item For example if an item is packaged 50 per pad 5 pads per carton You can set the order qty as 50 each (one pad) or 250 each (1 ctn)
              Business Group
              The business group that the publication supports Your choice here determines the list you choose from for Cost Center
              CorporateBusiness Development
              Finance
              Human Resources
              IT
              Logistics
              Manufacturing
              Marketing Commercial
              Marketing Europe
              Marketing Other
              Operations
              Order Services
              Other
              Process Improvement
              Procurement
              Quality
              Sales
              Max Order Quantity
              Presale items = 100
              Postsale items = 5
              NOTE You can use other quantities but the delivery may take a bit longer because a system admin must approve it
              Item Category - Form (F) or Book (B)
              Form (F) = Any publication that is a single sheet (ie 1 or 2 pages) an envelope or carbonless form
              Book (B) = Any publication that contains 3 or more pages
              BindingStitching
              For a Form (F) use
              CARBONLESS
              CUTSHEET
              ENVELOPE
              For a Book (B) use
              LOOSE LOOSE -Loose Leaf
              PERFECT PERFECT - Perfect Bound
              PLASTCOIL PLASTCOIL - Plastic Coil (Coil Bound)
              SADDLE SADDLE - Saddle Stitch
              STAPLED1 STAPLED1 -1 position
              STAPLED1B STAPLED1B - bottom 1 position
              STAPLED2 STAPLED2 - 2 positions
              THERMAL THERMAL - Thermal bound (Tape bound)
              THERMALO THERMALO - Thermal Bound (Tape bound - offline)
              WIRE O Wire O - Double Wire Bound (offline)
              Saddle-Stitch Items
              20 sheets max on 20 (text and cover)
              19 sheets max on 20 (text) and 24 (cover)
              18 sheets max on 24 (text and cover)
              All page quantities must be divisible by 4
              Tape Bound Items
              125 sheets max on 20 no cover
              120 sheets max wcover (90 index unless indicated otherwise)
              Perfect Bound Items
              475 sheets max on 20 no cover
              470 sheets max wcover (90 index unless indicated otherwise)
              Double Wire Bound Items
              40 sheets max on 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
              Coil Bound Items
              290 sheets max of 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
              Sides Printed
              Head2Head = Most common Double-sided printing with headers on both pages lining up at the top of the page
              Simplex = Single-sided printing
              Head2Toe = Least common Double-sided printing with header on one page lining up with the footer on the other page
              Number of Forms to a Sheet
              Number of publication pages printed on a sheet of paper at the printerFor example if a 4-page 85 x 11 publication is printed on the front and back sides of an 11 x 17 sheet of paper that is folded in half the Number of Forms to a Sheet = 4Example 2 If a 4-page 55 x 85 publication is printed on the front and back sides of an 85 x 11 sheet of paper that is folded in half the Number of forms to a Sheet = 4
              Number of Sheets Required to Print
              Number of sheets of paper required to print the publicationFor example if a 16-page 85 x 11 publication is printed on the front and back sides of four 11 x 17 sheets of paper that are folded in half and saddle stitched together the Number of Sheets Required to Print = 4Example 4 If a 4-page 55 x 85 publication is printed on the front and back sides of one 85 x 11 sheet of paper that is folded in half the Number of Sheets Required to Print = 1
              Paper Stock Type
              Description
              PLAIN Bond
              ACNTCVR Accent Cover
              BOND3H Bond (3-hole)
              BOOKENV Booklet Envelope
              C1SGLOSS C1S Gloss Finish
              C1SMATTE C1S Matt Finish
              C2SGLOSS C2S Gloss Finish
              C2SMATTE C2S Matt Finish
              CARD Card Stock
              CATLGENV Catalog Envelope
              CATLGENV6 6 Catalog Envelope
              COVERCOLOR Color Cover Copy
              CRCKPEEL Crack N Peel Label
              CUSTOM Custom
              CVRFUTURA Futura Cover
              ENV6x9 Standard 6X9 Envelope
              ENV9X12 Standard 9X12 Envelope
              ETHCERT Ethicon Certificate
              GLOSSCOVER Gloss Cover
              GLOSSTEXT Gloss Text
              HOTSTEXT Hots Text
              INDEX Index
              LABEL80 80 Up Label
              MICROPRT Micro Print
              OFFSET Offset
              PART2 2 Part
              PART3 3 Part
              PART4 4 Part
              PART5 5 Part
              PART6 6 Part
              PERF 12 inch Perfed
              PERMMAT Perm Mat Ad
              PRECUTTAB Pre-Cut Tab
              PREPERF Pre-Perforated
              RECYL Recycled
              SE10ENV 10 Standard Envelope
              SE10ITENV 10 Inside Tint Envelope
              SE9ENV 9 Stanard Envelope
              TAG Tag
              TEXT Text
              TEXTCOLOR Text Color Copy
              TEXTFUTURA Futura Text
              TEXTLASER Text Laser Print
              TRANSPRNCY Transparencies
              VELLUM Vellum
              VELLUM3HP Vellum 3HP
              WE10ENV 10 Window Envelope
              WE9ENV 9 Windor Envelope
              WE9ITENV 9 Inside Tint Window Envelope
              Paper Stock Color
              Black
              Blue
              Buff
              Canary
              Cherry
              Clear
              Cream
              Custom
              Goldrenrod
              Gray
              Green
              Ivory
              Lavender
              Manilla
              NCRPinkCanary
              NCRWhiteBlue
              NCRWhiteBlueCanary
              NCRWhiteCanary
              NCRWhiteCanaryPink
              NCRWhiteCanaryPinkGoldenrod
              NCRWhiteGreen
              NCRWhiteGoldenrodYellow
              NCRWhitePink
              NCRWhiteWhite
              Opaque
              Orange
              Orchid
              Peach
              Pink
              Purple
              Salmon
              Tan
              Violet
              White
              Finished Trim Sizes (listed - width x length)
              11 x 17
              18 x 24 Poster
              24 x 36 Poster
              3 x 5
              36 x 24 Poster
              4 x 6
              475 x 7
              475 x 775
              55 x 85
              6 x 4
              7 x 9
              7385 x 9 (RSI Std)
              85 x 11
              825 x 10875
              825 x 11 (RA product profile std)
              8375 x 10875
              9 x 12
              A4
              A5
              Other - Custom size listed below
              Drilling Locations
              1CENTER
              1LEFTTOP
              1TOPCENTER
              2LEFT
              2LEFT2TOP
              2TOP
              2TOP2LEFT
              2TOP3LEFT
              2TOP5LEFT
              2TOP5RIGHT
              3BOTTOM
              3LEFT
              3LEFT2TOP
              3LEFT3TOP
              3RIGHT
              3TOP
              3TOP5LEFT
              5BOTTOM
              5CENTER
              5LEFT
              5RIGHT
              5RIGHT2TOP
              5TOP
              For TRI fold - select Z or C type Description
              HALF Half
              C C Fold
              DBLEPARLL Double Parallel
              OFFSETZ Offset Z
              SAMPLE See Sample
              SHORT Short Fold
              V V Fold
              Z Z Fold
              Number of Pieces per Poly Wrap
              Publication length Number per Poly Wrap
              77 or more pages 1
              33 to 76 pages 25
              3 to 32 pages 50
              1 or 2 pages 100
              Comments
              CoverText Stock Spine
              100 Gloss Cover If your publication uses a spine make note of that in the comments field Be sure to include the spine as the last page of your PDF Do NOT include that page as part of the publication page count Because the addition of a spine will create an odd page count in the PDF contact a Super User to submit your publication via PDFdirect with an exception tool
              100 Gloss Text
              100 Text
              10pt C1S Cover
              10pt C2S Cover
              10pt C2S Text
              10pt Text Stock
              110 White Index
              12pt C1S Cover
              20 White Opaque Bond
              50 Colored Offset
              50 White Offset
              50 White Opaque
              60 Cover Stock
              60 White Offset
              80 Gloss Cover
              80 Gloss Text
              8pt C1S White
              90 White Index
              CoverText Ink
              Black
              Black + 1 PMS color Type in PMS color
              Black + 2 PMS colors Type in PMS colors
              4 color
              4 color over black
              4 color + 1 PMS color Type in PMS color
              4 color over black + 1 PMS color Type in PMS color
              4 color + 2 PMS colors Type in PMS colors
              4 color + aqueous
              4 color + varnish
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Cannot use quote symbol that is---- Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information White RRD must provide this information NA NA NA NA NA NA 85 11 SIDE NA NA NA NA HALF 85 x 11 50 RRD must provide this information
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B NA PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information GLOSS TEXT 80 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA NA NA NA HALF 85 x 11 RRD must provide this information
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              EA 1 1 See DocMan for the Cost Center selections associated with each Business Group Black amp White B PERFECT PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 2 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA 516 3LEFT NA NA NA NA RRD must provide this information Cover Stock = 90 White IndexText Stock = 20 White Opaque BondCover Ink = BlackText Ink = BlackSpine = If included as last page of PDF
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions EA 1 1 Marketing Commercial Marketing Other November 2008 5 Black amp White B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 4 16 4 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 475 7 SIDE NA NA NA HALF 425 x 7 50 RRD must provide this information Text Stock = 20 White Opaque BondText Ink = Black PN-25192
              Corp 17501
              Bill To 69
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions EA 1 1 Marketing Commercial Marketing Other November 2008 5 Black amp White B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 4 16 4 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 475 7 SIDE NA NA NA HALF 425 x 7 50 RRD must provide this information Text Stock = 20 White Opaque BondText Ink = Black PN-25192
              Details of the Rockwell Automation Print Specifications sheet
              This print specifications sheet is designed with multiple purposes- It is a vehicle to get the most accurate print specifications to RA-approved print vendors- It provides authors with an explanation of all necessary fields to complete before attaching the sheet to your PDF- It provides separate tabs so that an author can fill in all fields related to the publication on the Generic tab or publication-specific template-type tabs to minimize the number of fields an author must completeTo facilitate the most efficient use of this sheet we recommend that you click on the publication-specific tab that most closely fits you publication and use that to complete the print specificationsIMPORTANT Because this sheet was constructed using a sheet that RR Donnelley (RRD) uses to load print specifications there are some columns hidden For example the first field you must complete is Column E or Publication Number Columns A to D are used for RRD purposes and with information only representatives of that RA-approved printer can completeDO NOT delete any hidden columns from the tab you choose to use
              Definitions of Each Tab in Sheet
              Generic pub print specs Single sheet with all required columns for necessary specifications None of the columns are completed All must be completed before attaching the sheet to your PDFThis tab has 39 blank fields you must complete via free text type or pull-down menus
              IN RN pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to installation instructions (IN) and release notes (RN) However you can use this sheet for other publications that are similar to INs and RNsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              UM RM PM pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to user manuals (UM) reference manuals (RM) and programming manuals (PM) However you can use this sheet for other publications that are similar to UMs RMs and PMsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              AP PP pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to application solutions (AP) and product profiles (PP) However you can use this sheet for other publications that are similar to APs and PPsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              BR pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to brochures (BR) However you can use this sheet for other publications that are similar to BRsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              Field definitions Description of information fields used throughout the spreadsheet tabs that may not be immediately obvious to a user
              Attach Print Specs to PDF
              For Acrobat 80 follow these steps1 Open the PDF2 Click on DocumentgtAttach A File A new section appears at the bottom of the PDF3 Browse to the MS Excel file with the print specs and add it to the PDFFor Acrobat 70 follow these steps1 Open the PDF2 Click on the Attachments tab next to the publications bookmarks A new section appears at the bottom of the PDF3 Click on the Add button in the bottom section of the PDF4 Browse to the MS Excel file with the print specs and add it to the PDFFor Acrobat 60 follow these steps1 Open the PDF2 Go to the backcover of the PDF3 Click on the Tools pull-down menu4 Click on this sequence of menu options - Advanced Commenting Attach Attach File Tool A paper clip appears5 Click to put the paper clip somewhere on the backcover The browse window appears6 Browse to the MS Excel file with the print specs and add it to the PDFIMPORTANT If you are using Acrobat 50 or earlier please upgrade
              RA-QR005C-EN-E 608
Page 14: USB-to-ControlNet Cable - Rockwell Automationliterature.rockwellautomation.com/idc/groups/literature/documents/... · USB-to-ControlNet Cable Catalog Number 1784-U2CN Topic Page Important

14 USB-to-ControlNet Cable

Additional ResourcesThese documents contain additional information concerning related Rockwell Automation products

Resource Description

ControlNet Coax Media Planning and Installation Guide publication CNET-IN002

Provides ControlNet network planning information

Industrial Automation Wiring and Grounding Guidelines publication 1770-41

Provides general guidelines for installing a Rockwell Automation industrial system

Product Certifications website httpwwwabcom

Provides declarations of conformity certificates and other certification details

Publication 1784-IN047A-EN-P - November 2008

USB-to-ControlNet Cable 15

Notes

Publication 1784-IN047A-EN-P - November 2008

Rockwell Automation SupportRockwell Automation provides technical information on the Web to assist you in using its products At httpsupportrockwellautomationcom you can find technical manuals a knowledge base of FAQs technical and application notes sample code and links to software service packs and a MySupport feature that you can customize to make the best use of these tools

For an additional level of technical phone support for installation configuration and troubleshooting we offer TechConnect support programs For more information contact your local distributor or Rockwell Automation representative or visit httpsupportrockwellautomationcom

Installation Assistance

If you experience a problem within the first 24 hours of installation please review the information thats contained in this manual You can also contact a special Customer Support number for initial help in getting your product up and running

New Product Satisfaction Return

Rockwell Automation tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility However if your product is not functioning and needs to be returned follow these procedures

Allen-Bradley Data Highway Plus DH+ PLC-5 RSLinx Rockwell Automation SLC and TechConnect are trademarks of Rockwell Automation Inc

Trademarks not belonging to Rockwell Automation are property of their respective companies

United States 14406463434 Monday ndash Friday 8 am ndash 5 pm EST

Outside United States Please contact your local Rockwell Automation representative for any technical support issues

United States Contact your distributor You must provide a Customer Support case number (see phone number above to obtain one) to your distributor in order to complete the return process

Outside United States Please contact your local Rockwell Automation representative for the return procedure

Publication 1784-IN047A-EN-P - November 2008 PN-25192Copyright copy 2008 Rockwell Automation Inc All rights reserved Printed in the USA

  • Publication 1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions
    • Important User Information
    • Environment and Enclosure
    • About the Cable
    • Install the Cable
      • Obtain the Device Driver for the Cable
      • Configure and Connect the Cable
      • Traffic Analyzer Software
      • Product Dimensions
        • Status Indicators
        • Specifications
        • Additional Resources
        • Back Cover

            • ltlt ASCII85EncodePages false AllowTransparency false AutoPositionEPSFiles false AutoRotatePages None Binding Left CalGrayProfile (Gray Gamma 22) CalRGBProfile (sRGB IEC61966-21) CalCMYKProfile (Euroscale Uncoated v2) sRGBProfile (sRGB IEC61966-21) CannotEmbedFontPolicy Error CompatibilityLevel 14 CompressObjects Tags CompressPages true ConvertImagesToIndexed true PassThroughJPEGImages true CreateJDFFile false CreateJobTicket true DefaultRenderingIntent Default DetectBlends true DetectCurves 00000 ColorConversionStrategy LeaveColorUnchanged DoThumbnails false EmbedAllFonts true EmbedOpenType false ParseICCProfilesInComments true EmbedJobOptions true DSCReportingLevel 0 EmitDSCWarnings false EndPage -1 ImageMemory 1048576 LockDistillerParams true MaxSubsetPct 99 Optimize true OPM 1 ParseDSCComments false ParseDSCCommentsForDocInfo false PreserveCopyPage true PreserveDICMYKValues true PreserveEPSInfo false PreserveFlatness true PreserveHalftoneInfo true PreserveOPIComments false PreserveOverprintSettings true StartPage 1 SubsetFonts false TransferFunctionInfo Apply UCRandBGInfo Preserve UsePrologue false ColorSettingsFile (None) AlwaysEmbed [ true ArialMT ] NeverEmbed [ true ] AntiAliasColorImages false CropColorImages true ColorImageMinResolution 150 ColorImageMinResolutionPolicy OK DownsampleColorImages true ColorImageDownsampleType Bicubic ColorImageResolution 150 ColorImageDepth 8 ColorImageMinDownsampleDepth 1 ColorImageDownsampleThreshold 100000 EncodeColorImages true ColorImageFilter FlateEncode AutoFilterColorImages false ColorImageAutoFilterStrategy JPEG ColorACSImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt ColorImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt JPEG2000ColorACSImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt JPEG2000ColorImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt AntiAliasGrayImages false CropGrayImages true GrayImageMinResolution 150 GrayImageMinResolutionPolicy OK DownsampleGrayImages true GrayImageDownsampleType Bicubic GrayImageResolution 150 GrayImageDepth 8 GrayImageMinDownsampleDepth 2 GrayImageDownsampleThreshold 100000 EncodeGrayImages true GrayImageFilter FlateEncode AutoFilterGrayImages false GrayImageAutoFilterStrategy JPEG GrayACSImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt GrayImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt JPEG2000GrayACSImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt JPEG2000GrayImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt AntiAliasMonoImages false CropMonoImages true MonoImageMinResolution 900 MonoImageMinResolutionPolicy OK DownsampleMonoImages true MonoImageDownsampleType Bicubic MonoImageResolution 900 MonoImageDepth -1 MonoImageDownsampleThreshold 100000 EncodeMonoImages true MonoImageFilter CCITTFaxEncode MonoImageDict ltlt K -1 gtgt AllowPSXObjects true CheckCompliance [ None ] PDFX1aCheck false PDFX3Check false PDFXCompliantPDFOnly false PDFXNoTrimBoxError true PDFXTrimBoxToMediaBoxOffset [ 000000 000000 000000 000000 ] PDFXSetBleedBoxToMediaBox true PDFXBleedBoxToTrimBoxOffset [ 000000 000000 000000 000000 ] PDFXOutputIntentProfile (None) PDFXOutputConditionIdentifier () PDFXOutputCondition () PDFXRegistryName (httpwwwcolororg) PDFXTrapped False SyntheticBoldness 1000000 Description ltlt JPN ltFEFF3053306e8a2d5b9a306f300130d330b830cd30b9658766f8306e8868793a304a3088307353705237306b90693057305f00200050004400460020658766f830924f5c62103059308b3068304d306b4f7f75283057307e305930023053306e8a2d5b9a30674f5c62103057305f00200050004400460020658766f8306f0020004100630072006f0062006100740020304a30883073002000520065006100640065007200200035002e003000204ee5964d30678868793a3067304d307e30593002gt DEU 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 FRA 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 PTB 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 DAN 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 NLD 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 ESP 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 SUO ltFEFF004e00e4006900640065006e002000610073006500740075007300740065006e0020006100760075006c006c006100200076006f006900740020006c0075006f006400610020006a0061002000740075006c006f00730074006100610020005000440046002d0061007300690061006b00690072006a006f006a0061002c0020006a006f006900640065006e0020006500730069006b0061007400730065006c00750020006e00e400790074007400e400e40020006c0075006f00740065007400740061007600610073007400690020006c006f00700070007500740075006c006f006b00730065006e002e0020005000440046002d0061007300690061006b00690072006a0061007400200076006f0069006400610061006e0020006100760061007400610020004100630072006f006200610074002d0020006a0061002000520065006100640065007200200035002e00300020002d006f0068006a0065006c006d0061006c006c0061002000740061006900200075007500640065006d006d0061006c006c0061002000760065007200730069006f006c006c0061002egt ITA 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 NOR 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 SVE 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 ENU (Rockwell Job Options for Web-only PDF Files) gtgtgtgt setdistillerparamsltlt HWResolution [2540 2540] PageSize [792000 1224000]gtgt setpagedevice

              Intro

              ampLRA-QR005B-EN-E 308

              Generic pub print specs

              ampCItem Setup Sheet for Conversion Transfers
              ampLJIT-D-print SpreadsheetampCRA-QR005C-EN-EampRampD ampT

              IN RN pub type specs

              UM RM PM pub type specs

              AP PP pub type specs

              BR pub type specs

              Field definitions

              ampL04032006ampRampP
              PackagingOrdering Unit Of Measure
              EA = Each
              PK = Pack
              PD = Pad
              RL = Roll
              BK = Book
              CT = Carton
              BX = Box
              ST = Set
              Multiple Order Qty
              Separate methods of ordering same item For example if an item is packaged 50 per pad 5 pads per carton You can set the order qty as 50 each (one pad) or 250 each (1 ctn)
              Business Group
              The business group that the publication supports Your choice here determines the list you choose from for Cost Center
              CorporateBusiness Development
              Finance
              Human Resources
              IT
              Logistics
              Manufacturing
              Marketing Commercial
              Marketing Europe
              Marketing Other
              Operations
              Order Services
              Other
              Process Improvement
              Procurement
              Quality
              Sales
              Max Order Quantity
              Presale items = 100
              Postsale items = 5
              NOTE You can use other quantities but the delivery may take a bit longer because a system admin must approve it
              Item Category - Form (F) or Book (B)
              Form (F) = Any publication that is a single sheet (ie 1 or 2 pages) an envelope or carbonless form
              Book (B) = Any publication that contains 3 or more pages
              BindingStitching
              For a Form (F) use
              CARBONLESS
              CUTSHEET
              ENVELOPE
              For a Book (B) use
              LOOSE LOOSE -Loose Leaf
              PERFECT PERFECT - Perfect Bound
              PLASTCOIL PLASTCOIL - Plastic Coil (Coil Bound)
              SADDLE SADDLE - Saddle Stitch
              STAPLED1 STAPLED1 -1 position
              STAPLED1B STAPLED1B - bottom 1 position
              STAPLED2 STAPLED2 - 2 positions
              THERMAL THERMAL - Thermal bound (Tape bound)
              THERMALO THERMALO - Thermal Bound (Tape bound - offline)
              WIRE O Wire O - Double Wire Bound (offline)
              Saddle-Stitch Items
              20 sheets max on 20 (text and cover)
              19 sheets max on 20 (text) and 24 (cover)
              18 sheets max on 24 (text and cover)
              All page quantities must be divisible by 4
              Tape Bound Items
              125 sheets max on 20 no cover
              120 sheets max wcover (90 index unless indicated otherwise)
              Perfect Bound Items
              475 sheets max on 20 no cover
              470 sheets max wcover (90 index unless indicated otherwise)
              Double Wire Bound Items
              40 sheets max on 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
              Coil Bound Items
              290 sheets max of 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
              Sides Printed
              Head2Head = Most common Double-sided printing with headers on both pages lining up at the top of the page
              Simplex = Single-sided printing
              Head2Toe = Least common Double-sided printing with header on one page lining up with the footer on the other page
              Number of Forms to a Sheet
              Number of publication pages printed on a sheet of paper at the printerFor example if a 4-page 85 x 11 publication is printed on the front and back sides of an 11 x 17 sheet of paper that is folded in half the Number of Forms to a Sheet = 4Example 2 If a 4-page 55 x 85 publication is printed on the front and back sides of an 85 x 11 sheet of paper that is folded in half the Number of forms to a Sheet = 4
              Number of Sheets Required to Print
              Number of sheets of paper required to print the publicationFor example if a 16-page 85 x 11 publication is printed on the front and back sides of four 11 x 17 sheets of paper that are folded in half and saddle stitched together the Number of Sheets Required to Print = 4Example 4 If a 4-page 55 x 85 publication is printed on the front and back sides of one 85 x 11 sheet of paper that is folded in half the Number of Sheets Required to Print = 1
              Paper Stock Type
              Description
              PLAIN Bond
              ACNTCVR Accent Cover
              BOND3H Bond (3-hole)
              BOOKENV Booklet Envelope
              C1SGLOSS C1S Gloss Finish
              C1SMATTE C1S Matt Finish
              C2SGLOSS C2S Gloss Finish
              C2SMATTE C2S Matt Finish
              CARD Card Stock
              CATLGENV Catalog Envelope
              CATLGENV6 6 Catalog Envelope
              COVERCOLOR Color Cover Copy
              CRCKPEEL Crack N Peel Label
              CUSTOM Custom
              CVRFUTURA Futura Cover
              ENV6x9 Standard 6X9 Envelope
              ENV9X12 Standard 9X12 Envelope
              ETHCERT Ethicon Certificate
              GLOSSCOVER Gloss Cover
              GLOSSTEXT Gloss Text
              HOTSTEXT Hots Text
              INDEX Index
              LABEL80 80 Up Label
              MICROPRT Micro Print
              OFFSET Offset
              PART2 2 Part
              PART3 3 Part
              PART4 4 Part
              PART5 5 Part
              PART6 6 Part
              PERF 12 inch Perfed
              PERMMAT Perm Mat Ad
              PRECUTTAB Pre-Cut Tab
              PREPERF Pre-Perforated
              RECYL Recycled
              SE10ENV 10 Standard Envelope
              SE10ITENV 10 Inside Tint Envelope
              SE9ENV 9 Stanard Envelope
              TAG Tag
              TEXT Text
              TEXTCOLOR Text Color Copy
              TEXTFUTURA Futura Text
              TEXTLASER Text Laser Print
              TRANSPRNCY Transparencies
              VELLUM Vellum
              VELLUM3HP Vellum 3HP
              WE10ENV 10 Window Envelope
              WE9ENV 9 Windor Envelope
              WE9ITENV 9 Inside Tint Window Envelope
              Paper Stock Color
              Black
              Blue
              Buff
              Canary
              Cherry
              Clear
              Cream
              Custom
              Goldrenrod
              Gray
              Green
              Ivory
              Lavender
              Manilla
              NCRPinkCanary
              NCRWhiteBlue
              NCRWhiteBlueCanary
              NCRWhiteCanary
              NCRWhiteCanaryPink
              NCRWhiteCanaryPinkGoldenrod
              NCRWhiteGreen
              NCRWhiteGoldenrodYellow
              NCRWhitePink
              NCRWhiteWhite
              Opaque
              Orange
              Orchid
              Peach
              Pink
              Purple
              Salmon
              Tan
              Violet
              White
              Finished Trim Sizes (listed - width x length)
              11 x 17
              18 x 24 Poster
              24 x 36 Poster
              3 x 5
              36 x 24 Poster
              4 x 6
              475 x 7
              475 x 775
              55 x 85
              6 x 4
              7 x 9
              7385 x 9 (RSI Std)
              85 x 11
              825 x 10875
              825 x 11 (RA product profile std)
              8375 x 10875
              9 x 12
              A4
              A5
              Other - Custom size listed below
              Drilling Locations
              1CENTER
              1LEFTTOP
              1TOPCENTER
              2LEFT
              2LEFT2TOP
              2TOP
              2TOP2LEFT
              2TOP3LEFT
              2TOP5LEFT
              2TOP5RIGHT
              3BOTTOM
              3LEFT
              3LEFT2TOP
              3LEFT3TOP
              3RIGHT
              3TOP
              3TOP5LEFT
              5BOTTOM
              5CENTER
              5LEFT
              5RIGHT
              5RIGHT2TOP
              5TOP
              For TRI fold - select Z or C type Description
              HALF Half
              C C Fold
              DBLEPARLL Double Parallel
              OFFSETZ Offset Z
              SAMPLE See Sample
              SHORT Short Fold
              V V Fold
              Z Z Fold
              Number of Pieces per Poly Wrap
              Publication length Number per Poly Wrap
              77 or more pages 1
              33 to 76 pages 25
              3 to 32 pages 50
              1 or 2 pages 100
              Comments
              CoverText Stock Spine
              100 Gloss Cover If your publication uses a spine make note of that in the comments field Be sure to include the spine as the last page of your PDF Do NOT include that page as part of the publication page count Because the addition of a spine will create an odd page count in the PDF contact a Super User to submit your publication via PDFdirect with an exception tool
              100 Gloss Text
              100 Text
              10pt C1S Cover
              10pt C2S Cover
              10pt C2S Text
              10pt Text Stock
              110 White Index
              12pt C1S Cover
              20 White Opaque Bond
              50 Colored Offset
              50 White Offset
              50 White Opaque
              60 Cover Stock
              60 White Offset
              80 Gloss Cover
              80 Gloss Text
              8pt C1S White
              90 White Index
              CoverText Ink
              Black
              Black + 1 PMS color Type in PMS color
              Black + 2 PMS colors Type in PMS colors
              4 color
              4 color over black
              4 color + 1 PMS color Type in PMS color
              4 color over black + 1 PMS color Type in PMS color
              4 color + 2 PMS colors Type in PMS colors
              4 color + aqueous
              4 color + varnish
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Cannot use quote symbol that is---- Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information White RRD must provide this information NA NA NA NA NA NA 85 11 SIDE NA NA NA NA HALF 85 x 11 50 RRD must provide this information
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B NA PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information GLOSS TEXT 80 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA NA NA NA HALF 85 x 11 RRD must provide this information
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              EA 1 1 See DocMan for the Cost Center selections associated with each Business Group Black amp White B PERFECT PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 2 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA 516 3LEFT NA NA NA NA RRD must provide this information Cover Stock = 90 White IndexText Stock = 20 White Opaque BondCover Ink = BlackText Ink = BlackSpine = If included as last page of PDF
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions EA 1 1 Marketing Commercial Marketing Other November 2008 5 Black amp White B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 4 16 4 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 475 7 SIDE NA NA NA HALF 425 x 7 50 RRD must provide this information Text Stock = 20 White Opaque BondText Ink = Black PN-25192
              Corp 17501
              Bill To 69
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions EA 1 1 Marketing Commercial Marketing Other November 2008 5 Black amp White B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 4 16 4 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 475 7 SIDE NA NA NA HALF 425 x 7 50 RRD must provide this information Text Stock = 20 White Opaque BondText Ink = Black PN-25192
              Details of the Rockwell Automation Print Specifications sheet
              This print specifications sheet is designed with multiple purposes- It is a vehicle to get the most accurate print specifications to RA-approved print vendors- It provides authors with an explanation of all necessary fields to complete before attaching the sheet to your PDF- It provides separate tabs so that an author can fill in all fields related to the publication on the Generic tab or publication-specific template-type tabs to minimize the number of fields an author must completeTo facilitate the most efficient use of this sheet we recommend that you click on the publication-specific tab that most closely fits you publication and use that to complete the print specificationsIMPORTANT Because this sheet was constructed using a sheet that RR Donnelley (RRD) uses to load print specifications there are some columns hidden For example the first field you must complete is Column E or Publication Number Columns A to D are used for RRD purposes and with information only representatives of that RA-approved printer can completeDO NOT delete any hidden columns from the tab you choose to use
              Definitions of Each Tab in Sheet
              Generic pub print specs Single sheet with all required columns for necessary specifications None of the columns are completed All must be completed before attaching the sheet to your PDFThis tab has 39 blank fields you must complete via free text type or pull-down menus
              IN RN pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to installation instructions (IN) and release notes (RN) However you can use this sheet for other publications that are similar to INs and RNsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              UM RM PM pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to user manuals (UM) reference manuals (RM) and programming manuals (PM) However you can use this sheet for other publications that are similar to UMs RMs and PMsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              AP PP pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to application solutions (AP) and product profiles (PP) However you can use this sheet for other publications that are similar to APs and PPsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              BR pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to brochures (BR) However you can use this sheet for other publications that are similar to BRsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              Field definitions Description of information fields used throughout the spreadsheet tabs that may not be immediately obvious to a user
              Attach Print Specs to PDF
              For Acrobat 80 follow these steps1 Open the PDF2 Click on DocumentgtAttach A File A new section appears at the bottom of the PDF3 Browse to the MS Excel file with the print specs and add it to the PDFFor Acrobat 70 follow these steps1 Open the PDF2 Click on the Attachments tab next to the publications bookmarks A new section appears at the bottom of the PDF3 Click on the Add button in the bottom section of the PDF4 Browse to the MS Excel file with the print specs and add it to the PDFFor Acrobat 60 follow these steps1 Open the PDF2 Go to the backcover of the PDF3 Click on the Tools pull-down menu4 Click on this sequence of menu options - Advanced Commenting Attach Attach File Tool A paper clip appears5 Click to put the paper clip somewhere on the backcover The browse window appears6 Browse to the MS Excel file with the print specs and add it to the PDFIMPORTANT If you are using Acrobat 50 or earlier please upgrade
              RA-QR005C-EN-E 608
Page 15: USB-to-ControlNet Cable - Rockwell Automationliterature.rockwellautomation.com/idc/groups/literature/documents/... · USB-to-ControlNet Cable Catalog Number 1784-U2CN Topic Page Important

USB-to-ControlNet Cable 15

Notes

Publication 1784-IN047A-EN-P - November 2008

Rockwell Automation SupportRockwell Automation provides technical information on the Web to assist you in using its products At httpsupportrockwellautomationcom you can find technical manuals a knowledge base of FAQs technical and application notes sample code and links to software service packs and a MySupport feature that you can customize to make the best use of these tools

For an additional level of technical phone support for installation configuration and troubleshooting we offer TechConnect support programs For more information contact your local distributor or Rockwell Automation representative or visit httpsupportrockwellautomationcom

Installation Assistance

If you experience a problem within the first 24 hours of installation please review the information thats contained in this manual You can also contact a special Customer Support number for initial help in getting your product up and running

New Product Satisfaction Return

Rockwell Automation tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility However if your product is not functioning and needs to be returned follow these procedures

Allen-Bradley Data Highway Plus DH+ PLC-5 RSLinx Rockwell Automation SLC and TechConnect are trademarks of Rockwell Automation Inc

Trademarks not belonging to Rockwell Automation are property of their respective companies

United States 14406463434 Monday ndash Friday 8 am ndash 5 pm EST

Outside United States Please contact your local Rockwell Automation representative for any technical support issues

United States Contact your distributor You must provide a Customer Support case number (see phone number above to obtain one) to your distributor in order to complete the return process

Outside United States Please contact your local Rockwell Automation representative for the return procedure

Publication 1784-IN047A-EN-P - November 2008 PN-25192Copyright copy 2008 Rockwell Automation Inc All rights reserved Printed in the USA

  • Publication 1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions
    • Important User Information
    • Environment and Enclosure
    • About the Cable
    • Install the Cable
      • Obtain the Device Driver for the Cable
      • Configure and Connect the Cable
      • Traffic Analyzer Software
      • Product Dimensions
        • Status Indicators
        • Specifications
        • Additional Resources
        • Back Cover

            • ltlt ASCII85EncodePages false AllowTransparency false AutoPositionEPSFiles false AutoRotatePages None Binding Left CalGrayProfile (Gray Gamma 22) CalRGBProfile (sRGB IEC61966-21) CalCMYKProfile (Euroscale Uncoated v2) sRGBProfile (sRGB IEC61966-21) CannotEmbedFontPolicy Error CompatibilityLevel 14 CompressObjects Tags CompressPages true ConvertImagesToIndexed true PassThroughJPEGImages true CreateJDFFile false CreateJobTicket true DefaultRenderingIntent Default DetectBlends true DetectCurves 00000 ColorConversionStrategy LeaveColorUnchanged DoThumbnails false EmbedAllFonts true EmbedOpenType false ParseICCProfilesInComments true EmbedJobOptions true DSCReportingLevel 0 EmitDSCWarnings false EndPage -1 ImageMemory 1048576 LockDistillerParams true MaxSubsetPct 99 Optimize true OPM 1 ParseDSCComments false ParseDSCCommentsForDocInfo false PreserveCopyPage true PreserveDICMYKValues true PreserveEPSInfo false PreserveFlatness true PreserveHalftoneInfo true PreserveOPIComments false PreserveOverprintSettings true StartPage 1 SubsetFonts false TransferFunctionInfo Apply UCRandBGInfo Preserve UsePrologue false ColorSettingsFile (None) AlwaysEmbed [ true ArialMT ] NeverEmbed [ true ] AntiAliasColorImages false CropColorImages true ColorImageMinResolution 150 ColorImageMinResolutionPolicy OK DownsampleColorImages true ColorImageDownsampleType Bicubic ColorImageResolution 150 ColorImageDepth 8 ColorImageMinDownsampleDepth 1 ColorImageDownsampleThreshold 100000 EncodeColorImages true ColorImageFilter FlateEncode AutoFilterColorImages false ColorImageAutoFilterStrategy JPEG ColorACSImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt ColorImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt JPEG2000ColorACSImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt JPEG2000ColorImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt AntiAliasGrayImages false CropGrayImages true GrayImageMinResolution 150 GrayImageMinResolutionPolicy OK DownsampleGrayImages true GrayImageDownsampleType Bicubic GrayImageResolution 150 GrayImageDepth 8 GrayImageMinDownsampleDepth 2 GrayImageDownsampleThreshold 100000 EncodeGrayImages true GrayImageFilter FlateEncode AutoFilterGrayImages false GrayImageAutoFilterStrategy JPEG GrayACSImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt GrayImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt JPEG2000GrayACSImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt JPEG2000GrayImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt AntiAliasMonoImages false CropMonoImages true MonoImageMinResolution 900 MonoImageMinResolutionPolicy OK DownsampleMonoImages true MonoImageDownsampleType Bicubic MonoImageResolution 900 MonoImageDepth -1 MonoImageDownsampleThreshold 100000 EncodeMonoImages true MonoImageFilter CCITTFaxEncode MonoImageDict ltlt K -1 gtgt AllowPSXObjects true CheckCompliance [ None ] PDFX1aCheck false PDFX3Check false PDFXCompliantPDFOnly false PDFXNoTrimBoxError true PDFXTrimBoxToMediaBoxOffset [ 000000 000000 000000 000000 ] PDFXSetBleedBoxToMediaBox true PDFXBleedBoxToTrimBoxOffset [ 000000 000000 000000 000000 ] PDFXOutputIntentProfile (None) PDFXOutputConditionIdentifier () PDFXOutputCondition () PDFXRegistryName (httpwwwcolororg) PDFXTrapped False SyntheticBoldness 1000000 Description ltlt JPN ltFEFF3053306e8a2d5b9a306f300130d330b830cd30b9658766f8306e8868793a304a3088307353705237306b90693057305f00200050004400460020658766f830924f5c62103059308b3068304d306b4f7f75283057307e305930023053306e8a2d5b9a30674f5c62103057305f00200050004400460020658766f8306f0020004100630072006f0062006100740020304a30883073002000520065006100640065007200200035002e003000204ee5964d30678868793a3067304d307e30593002gt DEU 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 FRA 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 PTB 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 DAN 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 NLD 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 ESP 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 SUO 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 ITA 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 NOR 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 SVE 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 ENU (Rockwell Job Options for Web-only PDF Files) gtgtgtgt setdistillerparamsltlt HWResolution [2540 2540] PageSize [792000 1224000]gtgt setpagedevice

              Intro

              ampLRA-QR005B-EN-E 308

              Generic pub print specs

              ampCItem Setup Sheet for Conversion Transfers
              ampLJIT-D-print SpreadsheetampCRA-QR005C-EN-EampRampD ampT

              IN RN pub type specs

              UM RM PM pub type specs

              AP PP pub type specs

              BR pub type specs

              Field definitions

              ampL04032006ampRampP
              PackagingOrdering Unit Of Measure
              EA = Each
              PK = Pack
              PD = Pad
              RL = Roll
              BK = Book
              CT = Carton
              BX = Box
              ST = Set
              Multiple Order Qty
              Separate methods of ordering same item For example if an item is packaged 50 per pad 5 pads per carton You can set the order qty as 50 each (one pad) or 250 each (1 ctn)
              Business Group
              The business group that the publication supports Your choice here determines the list you choose from for Cost Center
              CorporateBusiness Development
              Finance
              Human Resources
              IT
              Logistics
              Manufacturing
              Marketing Commercial
              Marketing Europe
              Marketing Other
              Operations
              Order Services
              Other
              Process Improvement
              Procurement
              Quality
              Sales
              Max Order Quantity
              Presale items = 100
              Postsale items = 5
              NOTE You can use other quantities but the delivery may take a bit longer because a system admin must approve it
              Item Category - Form (F) or Book (B)
              Form (F) = Any publication that is a single sheet (ie 1 or 2 pages) an envelope or carbonless form
              Book (B) = Any publication that contains 3 or more pages
              BindingStitching
              For a Form (F) use
              CARBONLESS
              CUTSHEET
              ENVELOPE
              For a Book (B) use
              LOOSE LOOSE -Loose Leaf
              PERFECT PERFECT - Perfect Bound
              PLASTCOIL PLASTCOIL - Plastic Coil (Coil Bound)
              SADDLE SADDLE - Saddle Stitch
              STAPLED1 STAPLED1 -1 position
              STAPLED1B STAPLED1B - bottom 1 position
              STAPLED2 STAPLED2 - 2 positions
              THERMAL THERMAL - Thermal bound (Tape bound)
              THERMALO THERMALO - Thermal Bound (Tape bound - offline)
              WIRE O Wire O - Double Wire Bound (offline)
              Saddle-Stitch Items
              20 sheets max on 20 (text and cover)
              19 sheets max on 20 (text) and 24 (cover)
              18 sheets max on 24 (text and cover)
              All page quantities must be divisible by 4
              Tape Bound Items
              125 sheets max on 20 no cover
              120 sheets max wcover (90 index unless indicated otherwise)
              Perfect Bound Items
              475 sheets max on 20 no cover
              470 sheets max wcover (90 index unless indicated otherwise)
              Double Wire Bound Items
              40 sheets max on 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
              Coil Bound Items
              290 sheets max of 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
              Sides Printed
              Head2Head = Most common Double-sided printing with headers on both pages lining up at the top of the page
              Simplex = Single-sided printing
              Head2Toe = Least common Double-sided printing with header on one page lining up with the footer on the other page
              Number of Forms to a Sheet
              Number of publication pages printed on a sheet of paper at the printerFor example if a 4-page 85 x 11 publication is printed on the front and back sides of an 11 x 17 sheet of paper that is folded in half the Number of Forms to a Sheet = 4Example 2 If a 4-page 55 x 85 publication is printed on the front and back sides of an 85 x 11 sheet of paper that is folded in half the Number of forms to a Sheet = 4
              Number of Sheets Required to Print
              Number of sheets of paper required to print the publicationFor example if a 16-page 85 x 11 publication is printed on the front and back sides of four 11 x 17 sheets of paper that are folded in half and saddle stitched together the Number of Sheets Required to Print = 4Example 4 If a 4-page 55 x 85 publication is printed on the front and back sides of one 85 x 11 sheet of paper that is folded in half the Number of Sheets Required to Print = 1
              Paper Stock Type
              Description
              PLAIN Bond
              ACNTCVR Accent Cover
              BOND3H Bond (3-hole)
              BOOKENV Booklet Envelope
              C1SGLOSS C1S Gloss Finish
              C1SMATTE C1S Matt Finish
              C2SGLOSS C2S Gloss Finish
              C2SMATTE C2S Matt Finish
              CARD Card Stock
              CATLGENV Catalog Envelope
              CATLGENV6 6 Catalog Envelope
              COVERCOLOR Color Cover Copy
              CRCKPEEL Crack N Peel Label
              CUSTOM Custom
              CVRFUTURA Futura Cover
              ENV6x9 Standard 6X9 Envelope
              ENV9X12 Standard 9X12 Envelope
              ETHCERT Ethicon Certificate
              GLOSSCOVER Gloss Cover
              GLOSSTEXT Gloss Text
              HOTSTEXT Hots Text
              INDEX Index
              LABEL80 80 Up Label
              MICROPRT Micro Print
              OFFSET Offset
              PART2 2 Part
              PART3 3 Part
              PART4 4 Part
              PART5 5 Part
              PART6 6 Part
              PERF 12 inch Perfed
              PERMMAT Perm Mat Ad
              PRECUTTAB Pre-Cut Tab
              PREPERF Pre-Perforated
              RECYL Recycled
              SE10ENV 10 Standard Envelope
              SE10ITENV 10 Inside Tint Envelope
              SE9ENV 9 Stanard Envelope
              TAG Tag
              TEXT Text
              TEXTCOLOR Text Color Copy
              TEXTFUTURA Futura Text
              TEXTLASER Text Laser Print
              TRANSPRNCY Transparencies
              VELLUM Vellum
              VELLUM3HP Vellum 3HP
              WE10ENV 10 Window Envelope
              WE9ENV 9 Windor Envelope
              WE9ITENV 9 Inside Tint Window Envelope
              Paper Stock Color
              Black
              Blue
              Buff
              Canary
              Cherry
              Clear
              Cream
              Custom
              Goldrenrod
              Gray
              Green
              Ivory
              Lavender
              Manilla
              NCRPinkCanary
              NCRWhiteBlue
              NCRWhiteBlueCanary
              NCRWhiteCanary
              NCRWhiteCanaryPink
              NCRWhiteCanaryPinkGoldenrod
              NCRWhiteGreen
              NCRWhiteGoldenrodYellow
              NCRWhitePink
              NCRWhiteWhite
              Opaque
              Orange
              Orchid
              Peach
              Pink
              Purple
              Salmon
              Tan
              Violet
              White
              Finished Trim Sizes (listed - width x length)
              11 x 17
              18 x 24 Poster
              24 x 36 Poster
              3 x 5
              36 x 24 Poster
              4 x 6
              475 x 7
              475 x 775
              55 x 85
              6 x 4
              7 x 9
              7385 x 9 (RSI Std)
              85 x 11
              825 x 10875
              825 x 11 (RA product profile std)
              8375 x 10875
              9 x 12
              A4
              A5
              Other - Custom size listed below
              Drilling Locations
              1CENTER
              1LEFTTOP
              1TOPCENTER
              2LEFT
              2LEFT2TOP
              2TOP
              2TOP2LEFT
              2TOP3LEFT
              2TOP5LEFT
              2TOP5RIGHT
              3BOTTOM
              3LEFT
              3LEFT2TOP
              3LEFT3TOP
              3RIGHT
              3TOP
              3TOP5LEFT
              5BOTTOM
              5CENTER
              5LEFT
              5RIGHT
              5RIGHT2TOP
              5TOP
              For TRI fold - select Z or C type Description
              HALF Half
              C C Fold
              DBLEPARLL Double Parallel
              OFFSETZ Offset Z
              SAMPLE See Sample
              SHORT Short Fold
              V V Fold
              Z Z Fold
              Number of Pieces per Poly Wrap
              Publication length Number per Poly Wrap
              77 or more pages 1
              33 to 76 pages 25
              3 to 32 pages 50
              1 or 2 pages 100
              Comments
              CoverText Stock Spine
              100 Gloss Cover If your publication uses a spine make note of that in the comments field Be sure to include the spine as the last page of your PDF Do NOT include that page as part of the publication page count Because the addition of a spine will create an odd page count in the PDF contact a Super User to submit your publication via PDFdirect with an exception tool
              100 Gloss Text
              100 Text
              10pt C1S Cover
              10pt C2S Cover
              10pt C2S Text
              10pt Text Stock
              110 White Index
              12pt C1S Cover
              20 White Opaque Bond
              50 Colored Offset
              50 White Offset
              50 White Opaque
              60 Cover Stock
              60 White Offset
              80 Gloss Cover
              80 Gloss Text
              8pt C1S White
              90 White Index
              CoverText Ink
              Black
              Black + 1 PMS color Type in PMS color
              Black + 2 PMS colors Type in PMS colors
              4 color
              4 color over black
              4 color + 1 PMS color Type in PMS color
              4 color over black + 1 PMS color Type in PMS color
              4 color + 2 PMS colors Type in PMS colors
              4 color + aqueous
              4 color + varnish
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Cannot use quote symbol that is---- Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information White RRD must provide this information NA NA NA NA NA NA 85 11 SIDE NA NA NA NA HALF 85 x 11 50 RRD must provide this information
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B NA PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information GLOSS TEXT 80 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA NA NA NA HALF 85 x 11 RRD must provide this information
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              EA 1 1 See DocMan for the Cost Center selections associated with each Business Group Black amp White B PERFECT PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 2 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA 516 3LEFT NA NA NA NA RRD must provide this information Cover Stock = 90 White IndexText Stock = 20 White Opaque BondCover Ink = BlackText Ink = BlackSpine = If included as last page of PDF
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions EA 1 1 Marketing Commercial Marketing Other November 2008 5 Black amp White B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 4 16 4 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 475 7 SIDE NA NA NA HALF 425 x 7 50 RRD must provide this information Text Stock = 20 White Opaque BondText Ink = Black PN-25192
              Corp 17501
              Bill To 69
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions EA 1 1 Marketing Commercial Marketing Other November 2008 5 Black amp White B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 4 16 4 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 475 7 SIDE NA NA NA HALF 425 x 7 50 RRD must provide this information Text Stock = 20 White Opaque BondText Ink = Black PN-25192
              Details of the Rockwell Automation Print Specifications sheet
              This print specifications sheet is designed with multiple purposes- It is a vehicle to get the most accurate print specifications to RA-approved print vendors- It provides authors with an explanation of all necessary fields to complete before attaching the sheet to your PDF- It provides separate tabs so that an author can fill in all fields related to the publication on the Generic tab or publication-specific template-type tabs to minimize the number of fields an author must completeTo facilitate the most efficient use of this sheet we recommend that you click on the publication-specific tab that most closely fits you publication and use that to complete the print specificationsIMPORTANT Because this sheet was constructed using a sheet that RR Donnelley (RRD) uses to load print specifications there are some columns hidden For example the first field you must complete is Column E or Publication Number Columns A to D are used for RRD purposes and with information only representatives of that RA-approved printer can completeDO NOT delete any hidden columns from the tab you choose to use
              Definitions of Each Tab in Sheet
              Generic pub print specs Single sheet with all required columns for necessary specifications None of the columns are completed All must be completed before attaching the sheet to your PDFThis tab has 39 blank fields you must complete via free text type or pull-down menus
              IN RN pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to installation instructions (IN) and release notes (RN) However you can use this sheet for other publications that are similar to INs and RNsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              UM RM PM pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to user manuals (UM) reference manuals (RM) and programming manuals (PM) However you can use this sheet for other publications that are similar to UMs RMs and PMsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              AP PP pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to application solutions (AP) and product profiles (PP) However you can use this sheet for other publications that are similar to APs and PPsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              BR pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to brochures (BR) However you can use this sheet for other publications that are similar to BRsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              Field definitions Description of information fields used throughout the spreadsheet tabs that may not be immediately obvious to a user
              Attach Print Specs to PDF
              For Acrobat 80 follow these steps1 Open the PDF2 Click on DocumentgtAttach A File A new section appears at the bottom of the PDF3 Browse to the MS Excel file with the print specs and add it to the PDFFor Acrobat 70 follow these steps1 Open the PDF2 Click on the Attachments tab next to the publications bookmarks A new section appears at the bottom of the PDF3 Click on the Add button in the bottom section of the PDF4 Browse to the MS Excel file with the print specs and add it to the PDFFor Acrobat 60 follow these steps1 Open the PDF2 Go to the backcover of the PDF3 Click on the Tools pull-down menu4 Click on this sequence of menu options - Advanced Commenting Attach Attach File Tool A paper clip appears5 Click to put the paper clip somewhere on the backcover The browse window appears6 Browse to the MS Excel file with the print specs and add it to the PDFIMPORTANT If you are using Acrobat 50 or earlier please upgrade
              RA-QR005C-EN-E 608
Page 16: USB-to-ControlNet Cable - Rockwell Automationliterature.rockwellautomation.com/idc/groups/literature/documents/... · USB-to-ControlNet Cable Catalog Number 1784-U2CN Topic Page Important

Rockwell Automation SupportRockwell Automation provides technical information on the Web to assist you in using its products At httpsupportrockwellautomationcom you can find technical manuals a knowledge base of FAQs technical and application notes sample code and links to software service packs and a MySupport feature that you can customize to make the best use of these tools

For an additional level of technical phone support for installation configuration and troubleshooting we offer TechConnect support programs For more information contact your local distributor or Rockwell Automation representative or visit httpsupportrockwellautomationcom

Installation Assistance

If you experience a problem within the first 24 hours of installation please review the information thats contained in this manual You can also contact a special Customer Support number for initial help in getting your product up and running

New Product Satisfaction Return

Rockwell Automation tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility However if your product is not functioning and needs to be returned follow these procedures

Allen-Bradley Data Highway Plus DH+ PLC-5 RSLinx Rockwell Automation SLC and TechConnect are trademarks of Rockwell Automation Inc

Trademarks not belonging to Rockwell Automation are property of their respective companies

United States 14406463434 Monday ndash Friday 8 am ndash 5 pm EST

Outside United States Please contact your local Rockwell Automation representative for any technical support issues

United States Contact your distributor You must provide a Customer Support case number (see phone number above to obtain one) to your distributor in order to complete the return process

Outside United States Please contact your local Rockwell Automation representative for the return procedure

Publication 1784-IN047A-EN-P - November 2008 PN-25192Copyright copy 2008 Rockwell Automation Inc All rights reserved Printed in the USA

  • Publication 1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions
    • Important User Information
    • Environment and Enclosure
    • About the Cable
    • Install the Cable
      • Obtain the Device Driver for the Cable
      • Configure and Connect the Cable
      • Traffic Analyzer Software
      • Product Dimensions
        • Status Indicators
        • Specifications
        • Additional Resources
        • Back Cover

            • ltlt ASCII85EncodePages false AllowTransparency false AutoPositionEPSFiles false AutoRotatePages None Binding Left CalGrayProfile (Gray Gamma 22) CalRGBProfile (sRGB IEC61966-21) CalCMYKProfile (Euroscale Uncoated v2) sRGBProfile (sRGB IEC61966-21) CannotEmbedFontPolicy Error CompatibilityLevel 14 CompressObjects Tags CompressPages true ConvertImagesToIndexed true PassThroughJPEGImages true CreateJDFFile false CreateJobTicket true DefaultRenderingIntent Default DetectBlends true DetectCurves 00000 ColorConversionStrategy LeaveColorUnchanged DoThumbnails false EmbedAllFonts true EmbedOpenType false ParseICCProfilesInComments true EmbedJobOptions true DSCReportingLevel 0 EmitDSCWarnings false EndPage -1 ImageMemory 1048576 LockDistillerParams true MaxSubsetPct 99 Optimize true OPM 1 ParseDSCComments false ParseDSCCommentsForDocInfo false PreserveCopyPage true PreserveDICMYKValues true PreserveEPSInfo false PreserveFlatness true PreserveHalftoneInfo true PreserveOPIComments false PreserveOverprintSettings true StartPage 1 SubsetFonts false TransferFunctionInfo Apply UCRandBGInfo Preserve UsePrologue false ColorSettingsFile (None) AlwaysEmbed [ true ArialMT ] NeverEmbed [ true ] AntiAliasColorImages false CropColorImages true ColorImageMinResolution 150 ColorImageMinResolutionPolicy OK DownsampleColorImages true ColorImageDownsampleType Bicubic ColorImageResolution 150 ColorImageDepth 8 ColorImageMinDownsampleDepth 1 ColorImageDownsampleThreshold 100000 EncodeColorImages true ColorImageFilter FlateEncode AutoFilterColorImages false ColorImageAutoFilterStrategy JPEG ColorACSImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt ColorImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt JPEG2000ColorACSImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt JPEG2000ColorImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt AntiAliasGrayImages false CropGrayImages true GrayImageMinResolution 150 GrayImageMinResolutionPolicy OK DownsampleGrayImages true GrayImageDownsampleType Bicubic GrayImageResolution 150 GrayImageDepth 8 GrayImageMinDownsampleDepth 2 GrayImageDownsampleThreshold 100000 EncodeGrayImages true GrayImageFilter FlateEncode AutoFilterGrayImages false GrayImageAutoFilterStrategy JPEG GrayACSImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt GrayImageDict ltlt QFactor 015 HSamples [1 1 1 1] VSamples [1 1 1 1] gtgt JPEG2000GrayACSImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt JPEG2000GrayImageDict ltlt TileWidth 256 TileHeight 256 Quality 30 gtgt AntiAliasMonoImages false CropMonoImages true MonoImageMinResolution 900 MonoImageMinResolutionPolicy OK DownsampleMonoImages true MonoImageDownsampleType Bicubic MonoImageResolution 900 MonoImageDepth -1 MonoImageDownsampleThreshold 100000 EncodeMonoImages true MonoImageFilter CCITTFaxEncode MonoImageDict ltlt K -1 gtgt AllowPSXObjects true CheckCompliance [ None ] PDFX1aCheck false PDFX3Check false PDFXCompliantPDFOnly false PDFXNoTrimBoxError true PDFXTrimBoxToMediaBoxOffset [ 000000 000000 000000 000000 ] PDFXSetBleedBoxToMediaBox true PDFXBleedBoxToTrimBoxOffset [ 000000 000000 000000 000000 ] PDFXOutputIntentProfile (None) PDFXOutputConditionIdentifier () PDFXOutputCondition () PDFXRegistryName (httpwwwcolororg) PDFXTrapped False SyntheticBoldness 1000000 Description ltlt JPN ltFEFF3053306e8a2d5b9a306f300130d330b830cd30b9658766f8306e8868793a304a3088307353705237306b90693057305f00200050004400460020658766f830924f5c62103059308b3068304d306b4f7f75283057307e305930023053306e8a2d5b9a30674f5c62103057305f00200050004400460020658766f8306f0020004100630072006f0062006100740020304a30883073002000520065006100640065007200200035002e003000204ee5964d30678868793a3067304d307e30593002gt DEU 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 FRA 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 PTB 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 DAN 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 NLD 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 ESP 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 SUO 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 ITA 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 NOR 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 SVE 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 ENU (Rockwell Job Options for Web-only PDF Files) gtgtgtgt setdistillerparamsltlt HWResolution [2540 2540] PageSize [792000 1224000]gtgt setpagedevice

              Intro

              ampLRA-QR005B-EN-E 308

              Generic pub print specs

              ampCItem Setup Sheet for Conversion Transfers
              ampLJIT-D-print SpreadsheetampCRA-QR005C-EN-EampRampD ampT

              IN RN pub type specs

              UM RM PM pub type specs

              AP PP pub type specs

              BR pub type specs

              Field definitions

              ampL04032006ampRampP
              PackagingOrdering Unit Of Measure
              EA = Each
              PK = Pack
              PD = Pad
              RL = Roll
              BK = Book
              CT = Carton
              BX = Box
              ST = Set
              Multiple Order Qty
              Separate methods of ordering same item For example if an item is packaged 50 per pad 5 pads per carton You can set the order qty as 50 each (one pad) or 250 each (1 ctn)
              Business Group
              The business group that the publication supports Your choice here determines the list you choose from for Cost Center
              CorporateBusiness Development
              Finance
              Human Resources
              IT
              Logistics
              Manufacturing
              Marketing Commercial
              Marketing Europe
              Marketing Other
              Operations
              Order Services
              Other
              Process Improvement
              Procurement
              Quality
              Sales
              Max Order Quantity
              Presale items = 100
              Postsale items = 5
              NOTE You can use other quantities but the delivery may take a bit longer because a system admin must approve it
              Item Category - Form (F) or Book (B)
              Form (F) = Any publication that is a single sheet (ie 1 or 2 pages) an envelope or carbonless form
              Book (B) = Any publication that contains 3 or more pages
              BindingStitching
              For a Form (F) use
              CARBONLESS
              CUTSHEET
              ENVELOPE
              For a Book (B) use
              LOOSE LOOSE -Loose Leaf
              PERFECT PERFECT - Perfect Bound
              PLASTCOIL PLASTCOIL - Plastic Coil (Coil Bound)
              SADDLE SADDLE - Saddle Stitch
              STAPLED1 STAPLED1 -1 position
              STAPLED1B STAPLED1B - bottom 1 position
              STAPLED2 STAPLED2 - 2 positions
              THERMAL THERMAL - Thermal bound (Tape bound)
              THERMALO THERMALO - Thermal Bound (Tape bound - offline)
              WIRE O Wire O - Double Wire Bound (offline)
              Saddle-Stitch Items
              20 sheets max on 20 (text and cover)
              19 sheets max on 20 (text) and 24 (cover)
              18 sheets max on 24 (text and cover)
              All page quantities must be divisible by 4
              Tape Bound Items
              125 sheets max on 20 no cover
              120 sheets max wcover (90 index unless indicated otherwise)
              Perfect Bound Items
              475 sheets max on 20 no cover
              470 sheets max wcover (90 index unless indicated otherwise)
              Double Wire Bound Items
              40 sheets max on 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
              Coil Bound Items
              290 sheets max of 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
              Sides Printed
              Head2Head = Most common Double-sided printing with headers on both pages lining up at the top of the page
              Simplex = Single-sided printing
              Head2Toe = Least common Double-sided printing with header on one page lining up with the footer on the other page
              Number of Forms to a Sheet
              Number of publication pages printed on a sheet of paper at the printerFor example if a 4-page 85 x 11 publication is printed on the front and back sides of an 11 x 17 sheet of paper that is folded in half the Number of Forms to a Sheet = 4Example 2 If a 4-page 55 x 85 publication is printed on the front and back sides of an 85 x 11 sheet of paper that is folded in half the Number of forms to a Sheet = 4
              Number of Sheets Required to Print
              Number of sheets of paper required to print the publicationFor example if a 16-page 85 x 11 publication is printed on the front and back sides of four 11 x 17 sheets of paper that are folded in half and saddle stitched together the Number of Sheets Required to Print = 4Example 4 If a 4-page 55 x 85 publication is printed on the front and back sides of one 85 x 11 sheet of paper that is folded in half the Number of Sheets Required to Print = 1
              Paper Stock Type
              Description
              PLAIN Bond
              ACNTCVR Accent Cover
              BOND3H Bond (3-hole)
              BOOKENV Booklet Envelope
              C1SGLOSS C1S Gloss Finish
              C1SMATTE C1S Matt Finish
              C2SGLOSS C2S Gloss Finish
              C2SMATTE C2S Matt Finish
              CARD Card Stock
              CATLGENV Catalog Envelope
              CATLGENV6 6 Catalog Envelope
              COVERCOLOR Color Cover Copy
              CRCKPEEL Crack N Peel Label
              CUSTOM Custom
              CVRFUTURA Futura Cover
              ENV6x9 Standard 6X9 Envelope
              ENV9X12 Standard 9X12 Envelope
              ETHCERT Ethicon Certificate
              GLOSSCOVER Gloss Cover
              GLOSSTEXT Gloss Text
              HOTSTEXT Hots Text
              INDEX Index
              LABEL80 80 Up Label
              MICROPRT Micro Print
              OFFSET Offset
              PART2 2 Part
              PART3 3 Part
              PART4 4 Part
              PART5 5 Part
              PART6 6 Part
              PERF 12 inch Perfed
              PERMMAT Perm Mat Ad
              PRECUTTAB Pre-Cut Tab
              PREPERF Pre-Perforated
              RECYL Recycled
              SE10ENV 10 Standard Envelope
              SE10ITENV 10 Inside Tint Envelope
              SE9ENV 9 Stanard Envelope
              TAG Tag
              TEXT Text
              TEXTCOLOR Text Color Copy
              TEXTFUTURA Futura Text
              TEXTLASER Text Laser Print
              TRANSPRNCY Transparencies
              VELLUM Vellum
              VELLUM3HP Vellum 3HP
              WE10ENV 10 Window Envelope
              WE9ENV 9 Windor Envelope
              WE9ITENV 9 Inside Tint Window Envelope
              Paper Stock Color
              Black
              Blue
              Buff
              Canary
              Cherry
              Clear
              Cream
              Custom
              Goldrenrod
              Gray
              Green
              Ivory
              Lavender
              Manilla
              NCRPinkCanary
              NCRWhiteBlue
              NCRWhiteBlueCanary
              NCRWhiteCanary
              NCRWhiteCanaryPink
              NCRWhiteCanaryPinkGoldenrod
              NCRWhiteGreen
              NCRWhiteGoldenrodYellow
              NCRWhitePink
              NCRWhiteWhite
              Opaque
              Orange
              Orchid
              Peach
              Pink
              Purple
              Salmon
              Tan
              Violet
              White
              Finished Trim Sizes (listed - width x length)
              11 x 17
              18 x 24 Poster
              24 x 36 Poster
              3 x 5
              36 x 24 Poster
              4 x 6
              475 x 7
              475 x 775
              55 x 85
              6 x 4
              7 x 9
              7385 x 9 (RSI Std)
              85 x 11
              825 x 10875
              825 x 11 (RA product profile std)
              8375 x 10875
              9 x 12
              A4
              A5
              Other - Custom size listed below
              Drilling Locations
              1CENTER
              1LEFTTOP
              1TOPCENTER
              2LEFT
              2LEFT2TOP
              2TOP
              2TOP2LEFT
              2TOP3LEFT
              2TOP5LEFT
              2TOP5RIGHT
              3BOTTOM
              3LEFT
              3LEFT2TOP
              3LEFT3TOP
              3RIGHT
              3TOP
              3TOP5LEFT
              5BOTTOM
              5CENTER
              5LEFT
              5RIGHT
              5RIGHT2TOP
              5TOP
              For TRI fold - select Z or C type Description
              HALF Half
              C C Fold
              DBLEPARLL Double Parallel
              OFFSETZ Offset Z
              SAMPLE See Sample
              SHORT Short Fold
              V V Fold
              Z Z Fold
              Number of Pieces per Poly Wrap
              Publication length Number per Poly Wrap
              77 or more pages 1
              33 to 76 pages 25
              3 to 32 pages 50
              1 or 2 pages 100
              Comments
              CoverText Stock Spine
              100 Gloss Cover If your publication uses a spine make note of that in the comments field Be sure to include the spine as the last page of your PDF Do NOT include that page as part of the publication page count Because the addition of a spine will create an odd page count in the PDF contact a Super User to submit your publication via PDFdirect with an exception tool
              100 Gloss Text
              100 Text
              10pt C1S Cover
              10pt C2S Cover
              10pt C2S Text
              10pt Text Stock
              110 White Index
              12pt C1S Cover
              20 White Opaque Bond
              50 Colored Offset
              50 White Offset
              50 White Opaque
              60 Cover Stock
              60 White Offset
              80 Gloss Cover
              80 Gloss Text
              8pt C1S White
              90 White Index
              CoverText Ink
              Black
              Black + 1 PMS color Type in PMS color
              Black + 2 PMS colors Type in PMS colors
              4 color
              4 color over black
              4 color + 1 PMS color Type in PMS color
              4 color over black + 1 PMS color Type in PMS color
              4 color + 2 PMS colors Type in PMS colors
              4 color + aqueous
              4 color + varnish
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Cannot use quote symbol that is---- Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information White RRD must provide this information NA NA NA NA NA NA 85 11 SIDE NA NA NA NA HALF 85 x 11 50 RRD must provide this information
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B NA PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information GLOSS TEXT 80 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA NA NA NA HALF 85 x 11 RRD must provide this information
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              EA 1 1 See DocMan for the Cost Center selections associated with each Business Group Black amp White B PERFECT PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 2 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA 516 3LEFT NA NA NA NA RRD must provide this information Cover Stock = 90 White IndexText Stock = 20 White Opaque BondCover Ink = BlackText Ink = BlackSpine = If included as last page of PDF
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions EA 1 1 Marketing Commercial Marketing Other November 2008 5 Black amp White B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 4 16 4 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 475 7 SIDE NA NA NA HALF 425 x 7 50 RRD must provide this information Text Stock = 20 White Opaque BondText Ink = Black PN-25192
              Corp 17501
              Bill To 69
              dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
              Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
              Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
              1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions EA 1 1 Marketing Commercial Marketing Other November 2008 5 Black amp White B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 4 16 4 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 475 7 SIDE NA NA NA HALF 425 x 7 50 RRD must provide this information Text Stock = 20 White Opaque BondText Ink = Black PN-25192
              Details of the Rockwell Automation Print Specifications sheet
              This print specifications sheet is designed with multiple purposes- It is a vehicle to get the most accurate print specifications to RA-approved print vendors- It provides authors with an explanation of all necessary fields to complete before attaching the sheet to your PDF- It provides separate tabs so that an author can fill in all fields related to the publication on the Generic tab or publication-specific template-type tabs to minimize the number of fields an author must completeTo facilitate the most efficient use of this sheet we recommend that you click on the publication-specific tab that most closely fits you publication and use that to complete the print specificationsIMPORTANT Because this sheet was constructed using a sheet that RR Donnelley (RRD) uses to load print specifications there are some columns hidden For example the first field you must complete is Column E or Publication Number Columns A to D are used for RRD purposes and with information only representatives of that RA-approved printer can completeDO NOT delete any hidden columns from the tab you choose to use
              Definitions of Each Tab in Sheet
              Generic pub print specs Single sheet with all required columns for necessary specifications None of the columns are completed All must be completed before attaching the sheet to your PDFThis tab has 39 blank fields you must complete via free text type or pull-down menus
              IN RN pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to installation instructions (IN) and release notes (RN) However you can use this sheet for other publications that are similar to INs and RNsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              UM RM PM pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to user manuals (UM) reference manuals (RM) and programming manuals (PM) However you can use this sheet for other publications that are similar to UMs RMs and PMsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              AP PP pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to application solutions (AP) and product profiles (PP) However you can use this sheet for other publications that are similar to APs and PPsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              BR pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to brochures (BR) However you can use this sheet for other publications that are similar to BRsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
              Field definitions Description of information fields used throughout the spreadsheet tabs that may not be immediately obvious to a user
              Attach Print Specs to PDF
              For Acrobat 80 follow these steps1 Open the PDF2 Click on DocumentgtAttach A File A new section appears at the bottom of the PDF3 Browse to the MS Excel file with the print specs and add it to the PDFFor Acrobat 70 follow these steps1 Open the PDF2 Click on the Attachments tab next to the publications bookmarks A new section appears at the bottom of the PDF3 Click on the Add button in the bottom section of the PDF4 Browse to the MS Excel file with the print specs and add it to the PDFFor Acrobat 60 follow these steps1 Open the PDF2 Go to the backcover of the PDF3 Click on the Tools pull-down menu4 Click on this sequence of menu options - Advanced Commenting Attach Attach File Tool A paper clip appears5 Click to put the paper clip somewhere on the backcover The browse window appears6 Browse to the MS Excel file with the print specs and add it to the PDFIMPORTANT If you are using Acrobat 50 or earlier please upgrade
              RA-QR005C-EN-E 608
Page 17: USB-to-ControlNet Cable - Rockwell Automationliterature.rockwellautomation.com/idc/groups/literature/documents/... · USB-to-ControlNet Cable Catalog Number 1784-U2CN Topic Page Important

Intro

ampLRA-QR005B-EN-E 308

Generic pub print specs

ampCItem Setup Sheet for Conversion Transfers
ampLJIT-D-print SpreadsheetampCRA-QR005C-EN-EampRampD ampT

IN RN pub type specs

UM RM PM pub type specs

AP PP pub type specs

BR pub type specs

Field definitions

ampL04032006ampRampP
PackagingOrdering Unit Of Measure
EA = Each
PK = Pack
PD = Pad
RL = Roll
BK = Book
CT = Carton
BX = Box
ST = Set
Multiple Order Qty
Separate methods of ordering same item For example if an item is packaged 50 per pad 5 pads per carton You can set the order qty as 50 each (one pad) or 250 each (1 ctn)
Business Group
The business group that the publication supports Your choice here determines the list you choose from for Cost Center
CorporateBusiness Development
Finance
Human Resources
IT
Logistics
Manufacturing
Marketing Commercial
Marketing Europe
Marketing Other
Operations
Order Services
Other
Process Improvement
Procurement
Quality
Sales
Max Order Quantity
Presale items = 100
Postsale items = 5
NOTE You can use other quantities but the delivery may take a bit longer because a system admin must approve it
Item Category - Form (F) or Book (B)
Form (F) = Any publication that is a single sheet (ie 1 or 2 pages) an envelope or carbonless form
Book (B) = Any publication that contains 3 or more pages
BindingStitching
For a Form (F) use
CARBONLESS
CUTSHEET
ENVELOPE
For a Book (B) use
LOOSE LOOSE -Loose Leaf
PERFECT PERFECT - Perfect Bound
PLASTCOIL PLASTCOIL - Plastic Coil (Coil Bound)
SADDLE SADDLE - Saddle Stitch
STAPLED1 STAPLED1 -1 position
STAPLED1B STAPLED1B - bottom 1 position
STAPLED2 STAPLED2 - 2 positions
THERMAL THERMAL - Thermal bound (Tape bound)
THERMALO THERMALO - Thermal Bound (Tape bound - offline)
WIRE O Wire O - Double Wire Bound (offline)
Saddle-Stitch Items
20 sheets max on 20 (text and cover)
19 sheets max on 20 (text) and 24 (cover)
18 sheets max on 24 (text and cover)
All page quantities must be divisible by 4
Tape Bound Items
125 sheets max on 20 no cover
120 sheets max wcover (90 index unless indicated otherwise)
Perfect Bound Items
475 sheets max on 20 no cover
470 sheets max wcover (90 index unless indicated otherwise)
Double Wire Bound Items
40 sheets max on 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
Coil Bound Items
290 sheets max of 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
Sides Printed
Head2Head = Most common Double-sided printing with headers on both pages lining up at the top of the page
Simplex = Single-sided printing
Head2Toe = Least common Double-sided printing with header on one page lining up with the footer on the other page
Number of Forms to a Sheet
Number of publication pages printed on a sheet of paper at the printerFor example if a 4-page 85 x 11 publication is printed on the front and back sides of an 11 x 17 sheet of paper that is folded in half the Number of Forms to a Sheet = 4Example 2 If a 4-page 55 x 85 publication is printed on the front and back sides of an 85 x 11 sheet of paper that is folded in half the Number of forms to a Sheet = 4
Number of Sheets Required to Print
Number of sheets of paper required to print the publicationFor example if a 16-page 85 x 11 publication is printed on the front and back sides of four 11 x 17 sheets of paper that are folded in half and saddle stitched together the Number of Sheets Required to Print = 4Example 4 If a 4-page 55 x 85 publication is printed on the front and back sides of one 85 x 11 sheet of paper that is folded in half the Number of Sheets Required to Print = 1
Paper Stock Type
Description
PLAIN Bond
ACNTCVR Accent Cover
BOND3H Bond (3-hole)
BOOKENV Booklet Envelope
C1SGLOSS C1S Gloss Finish
C1SMATTE C1S Matt Finish
C2SGLOSS C2S Gloss Finish
C2SMATTE C2S Matt Finish
CARD Card Stock
CATLGENV Catalog Envelope
CATLGENV6 6 Catalog Envelope
COVERCOLOR Color Cover Copy
CRCKPEEL Crack N Peel Label
CUSTOM Custom
CVRFUTURA Futura Cover
ENV6x9 Standard 6X9 Envelope
ENV9X12 Standard 9X12 Envelope
ETHCERT Ethicon Certificate
GLOSSCOVER Gloss Cover
GLOSSTEXT Gloss Text
HOTSTEXT Hots Text
INDEX Index
LABEL80 80 Up Label
MICROPRT Micro Print
OFFSET Offset
PART2 2 Part
PART3 3 Part
PART4 4 Part
PART5 5 Part
PART6 6 Part
PERF 12 inch Perfed
PERMMAT Perm Mat Ad
PRECUTTAB Pre-Cut Tab
PREPERF Pre-Perforated
RECYL Recycled
SE10ENV 10 Standard Envelope
SE10ITENV 10 Inside Tint Envelope
SE9ENV 9 Stanard Envelope
TAG Tag
TEXT Text
TEXTCOLOR Text Color Copy
TEXTFUTURA Futura Text
TEXTLASER Text Laser Print
TRANSPRNCY Transparencies
VELLUM Vellum
VELLUM3HP Vellum 3HP
WE10ENV 10 Window Envelope
WE9ENV 9 Windor Envelope
WE9ITENV 9 Inside Tint Window Envelope
Paper Stock Color
Black
Blue
Buff
Canary
Cherry
Clear
Cream
Custom
Goldrenrod
Gray
Green
Ivory
Lavender
Manilla
NCRPinkCanary
NCRWhiteBlue
NCRWhiteBlueCanary
NCRWhiteCanary
NCRWhiteCanaryPink
NCRWhiteCanaryPinkGoldenrod
NCRWhiteGreen
NCRWhiteGoldenrodYellow
NCRWhitePink
NCRWhiteWhite
Opaque
Orange
Orchid
Peach
Pink
Purple
Salmon
Tan
Violet
White
Finished Trim Sizes (listed - width x length)
11 x 17
18 x 24 Poster
24 x 36 Poster
3 x 5
36 x 24 Poster
4 x 6
475 x 7
475 x 775
55 x 85
6 x 4
7 x 9
7385 x 9 (RSI Std)
85 x 11
825 x 10875
825 x 11 (RA product profile std)
8375 x 10875
9 x 12
A4
A5
Other - Custom size listed below
Drilling Locations
1CENTER
1LEFTTOP
1TOPCENTER
2LEFT
2LEFT2TOP
2TOP
2TOP2LEFT
2TOP3LEFT
2TOP5LEFT
2TOP5RIGHT
3BOTTOM
3LEFT
3LEFT2TOP
3LEFT3TOP
3RIGHT
3TOP
3TOP5LEFT
5BOTTOM
5CENTER
5LEFT
5RIGHT
5RIGHT2TOP
5TOP
For TRI fold - select Z or C type Description
HALF Half
C C Fold
DBLEPARLL Double Parallel
OFFSETZ Offset Z
SAMPLE See Sample
SHORT Short Fold
V V Fold
Z Z Fold
Number of Pieces per Poly Wrap
Publication length Number per Poly Wrap
77 or more pages 1
33 to 76 pages 25
3 to 32 pages 50
1 or 2 pages 100
Comments
CoverText Stock Spine
100 Gloss Cover If your publication uses a spine make note of that in the comments field Be sure to include the spine as the last page of your PDF Do NOT include that page as part of the publication page count Because the addition of a spine will create an odd page count in the PDF contact a Super User to submit your publication via PDFdirect with an exception tool
100 Gloss Text
100 Text
10pt C1S Cover
10pt C2S Cover
10pt C2S Text
10pt Text Stock
110 White Index
12pt C1S Cover
20 White Opaque Bond
50 Colored Offset
50 White Offset
50 White Opaque
60 Cover Stock
60 White Offset
80 Gloss Cover
80 Gloss Text
8pt C1S White
90 White Index
CoverText Ink
Black
Black + 1 PMS color Type in PMS color
Black + 2 PMS colors Type in PMS colors
4 color
4 color over black
4 color + 1 PMS color Type in PMS color
4 color over black + 1 PMS color Type in PMS color
4 color + 2 PMS colors Type in PMS colors
4 color + aqueous
4 color + varnish
dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Cannot use quote symbol that is---- Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information White RRD must provide this information NA NA NA NA NA NA 85 11 SIDE NA NA NA NA HALF 85 x 11 50 RRD must provide this information
dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B NA PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information GLOSS TEXT 80 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA NA NA NA HALF 85 x 11 RRD must provide this information
dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
EA 1 1 See DocMan for the Cost Center selections associated with each Business Group Black amp White B PERFECT PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 2 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA 516 3LEFT NA NA NA NA RRD must provide this information Cover Stock = 90 White IndexText Stock = 20 White Opaque BondCover Ink = BlackText Ink = BlackSpine = If included as last page of PDF
dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions EA 1 1 Marketing Commercial Marketing Other November 2008 5 Black amp White B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 4 16 4 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 475 7 SIDE NA NA NA HALF 425 x 7 50 RRD must provide this information Text Stock = 20 White Opaque BondText Ink = Black PN-25192
Corp 17501
Bill To 69
dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions EA 1 1 Marketing Commercial Marketing Other November 2008 5 Black amp White B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 4 16 4 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 475 7 SIDE NA NA NA HALF 425 x 7 50 RRD must provide this information Text Stock = 20 White Opaque BondText Ink = Black PN-25192
Details of the Rockwell Automation Print Specifications sheet
This print specifications sheet is designed with multiple purposes- It is a vehicle to get the most accurate print specifications to RA-approved print vendors- It provides authors with an explanation of all necessary fields to complete before attaching the sheet to your PDF- It provides separate tabs so that an author can fill in all fields related to the publication on the Generic tab or publication-specific template-type tabs to minimize the number of fields an author must completeTo facilitate the most efficient use of this sheet we recommend that you click on the publication-specific tab that most closely fits you publication and use that to complete the print specificationsIMPORTANT Because this sheet was constructed using a sheet that RR Donnelley (RRD) uses to load print specifications there are some columns hidden For example the first field you must complete is Column E or Publication Number Columns A to D are used for RRD purposes and with information only representatives of that RA-approved printer can completeDO NOT delete any hidden columns from the tab you choose to use
Definitions of Each Tab in Sheet
Generic pub print specs Single sheet with all required columns for necessary specifications None of the columns are completed All must be completed before attaching the sheet to your PDFThis tab has 39 blank fields you must complete via free text type or pull-down menus
IN RN pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to installation instructions (IN) and release notes (RN) However you can use this sheet for other publications that are similar to INs and RNsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
UM RM PM pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to user manuals (UM) reference manuals (RM) and programming manuals (PM) However you can use this sheet for other publications that are similar to UMs RMs and PMsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
AP PP pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to application solutions (AP) and product profiles (PP) However you can use this sheet for other publications that are similar to APs and PPsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
BR pub type specs Templates with many fields already completed according to typical default settings Use this tab with publications similar to brochures (BR) However you can use this sheet for other publications that are similar to BRsThis sheet has several fields already completed with default values which you can change You must complete the additional fields
Field definitions Description of information fields used throughout the spreadsheet tabs that may not be immediately obvious to a user
Attach Print Specs to PDF
For Acrobat 80 follow these steps1 Open the PDF2 Click on DocumentgtAttach A File A new section appears at the bottom of the PDF3 Browse to the MS Excel file with the print specs and add it to the PDFFor Acrobat 70 follow these steps1 Open the PDF2 Click on the Attachments tab next to the publications bookmarks A new section appears at the bottom of the PDF3 Click on the Add button in the bottom section of the PDF4 Browse to the MS Excel file with the print specs and add it to the PDFFor Acrobat 60 follow these steps1 Open the PDF2 Go to the backcover of the PDF3 Click on the Tools pull-down menu4 Click on this sequence of menu options - Advanced Commenting Attach Attach File Tool A paper clip appears5 Click to put the paper clip somewhere on the backcover The browse window appears6 Browse to the MS Excel file with the print specs and add it to the PDFIMPORTANT If you are using Acrobat 50 or earlier please upgrade
RA-QR005C-EN-E 608
Page 18: USB-to-ControlNet Cable - Rockwell Automationliterature.rockwellautomation.com/idc/groups/literature/documents/... · USB-to-ControlNet Cable Catalog Number 1784-U2CN Topic Page Important

Generic pub print specs

ampCItem Setup Sheet for Conversion Transfers
ampLJIT-D-print SpreadsheetampCRA-QR005C-EN-EampRampD ampT

IN RN pub type specs

UM RM PM pub type specs

AP PP pub type specs

BR pub type specs

Field definitions

ampL04032006ampRampP
PackagingOrdering Unit Of Measure
EA = Each
PK = Pack
PD = Pad
RL = Roll
BK = Book
CT = Carton
BX = Box
ST = Set
Multiple Order Qty
Separate methods of ordering same item For example if an item is packaged 50 per pad 5 pads per carton You can set the order qty as 50 each (one pad) or 250 each (1 ctn)
Business Group
The business group that the publication supports Your choice here determines the list you choose from for Cost Center
CorporateBusiness Development
Finance
Human Resources
IT
Logistics
Manufacturing
Marketing Commercial
Marketing Europe
Marketing Other
Operations
Order Services
Other
Process Improvement
Procurement
Quality
Sales
Max Order Quantity
Presale items = 100
Postsale items = 5
NOTE You can use other quantities but the delivery may take a bit longer because a system admin must approve it
Item Category - Form (F) or Book (B)
Form (F) = Any publication that is a single sheet (ie 1 or 2 pages) an envelope or carbonless form
Book (B) = Any publication that contains 3 or more pages
BindingStitching
For a Form (F) use
CARBONLESS
CUTSHEET
ENVELOPE
For a Book (B) use
LOOSE LOOSE -Loose Leaf
PERFECT PERFECT - Perfect Bound
PLASTCOIL PLASTCOIL - Plastic Coil (Coil Bound)
SADDLE SADDLE - Saddle Stitch
STAPLED1 STAPLED1 -1 position
STAPLED1B STAPLED1B - bottom 1 position
STAPLED2 STAPLED2 - 2 positions
THERMAL THERMAL - Thermal bound (Tape bound)
THERMALO THERMALO - Thermal Bound (Tape bound - offline)
WIRE O Wire O - Double Wire Bound (offline)
Saddle-Stitch Items
20 sheets max on 20 (text and cover)
19 sheets max on 20 (text) and 24 (cover)
18 sheets max on 24 (text and cover)
All page quantities must be divisible by 4
Tape Bound Items
125 sheets max on 20 no cover
120 sheets max wcover (90 index unless indicated otherwise)
Perfect Bound Items
475 sheets max on 20 no cover
470 sheets max wcover (90 index unless indicated otherwise)
Double Wire Bound Items
40 sheets max on 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
Coil Bound Items
290 sheets max of 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
Sides Printed
Head2Head = Most common Double-sided printing with headers on both pages lining up at the top of the page
Simplex = Single-sided printing
Head2Toe = Least common Double-sided printing with header on one page lining up with the footer on the other page
Number of Forms to a Sheet
Number of publication pages printed on a sheet of paper at the printerFor example if a 4-page 85 x 11 publication is printed on the front and back sides of an 11 x 17 sheet of paper that is folded in half the Number of Forms to a Sheet = 4Example 2 If a 4-page 55 x 85 publication is printed on the front and back sides of an 85 x 11 sheet of paper that is folded in half the Number of forms to a Sheet = 4
Number of Sheets Required to Print
Number of sheets of paper required to print the publicationFor example if a 16-page 85 x 11 publication is printed on the front and back sides of four 11 x 17 sheets of paper that are folded in half and saddle stitched together the Number of Sheets Required to Print = 4Example 4 If a 4-page 55 x 85 publication is printed on the front and back sides of one 85 x 11 sheet of paper that is folded in half the Number of Sheets Required to Print = 1
Paper Stock Type
Description
PLAIN Bond
ACNTCVR Accent Cover
BOND3H Bond (3-hole)
BOOKENV Booklet Envelope
C1SGLOSS C1S Gloss Finish
C1SMATTE C1S Matt Finish
C2SGLOSS C2S Gloss Finish
C2SMATTE C2S Matt Finish
CARD Card Stock
CATLGENV Catalog Envelope
CATLGENV6 6 Catalog Envelope
COVERCOLOR Color Cover Copy
CRCKPEEL Crack N Peel Label
CUSTOM Custom
CVRFUTURA Futura Cover
ENV6x9 Standard 6X9 Envelope
ENV9X12 Standard 9X12 Envelope
ETHCERT Ethicon Certificate
GLOSSCOVER Gloss Cover
GLOSSTEXT Gloss Text
HOTSTEXT Hots Text
INDEX Index
LABEL80 80 Up Label
MICROPRT Micro Print
OFFSET Offset
PART2 2 Part
PART3 3 Part
PART4 4 Part
PART5 5 Part
PART6 6 Part
PERF 12 inch Perfed
PERMMAT Perm Mat Ad
PRECUTTAB Pre-Cut Tab
PREPERF Pre-Perforated
RECYL Recycled
SE10ENV 10 Standard Envelope
SE10ITENV 10 Inside Tint Envelope
SE9ENV 9 Stanard Envelope
TAG Tag
TEXT Text
TEXTCOLOR Text Color Copy
TEXTFUTURA Futura Text
TEXTLASER Text Laser Print
TRANSPRNCY Transparencies
VELLUM Vellum
VELLUM3HP Vellum 3HP
WE10ENV 10 Window Envelope
WE9ENV 9 Windor Envelope
WE9ITENV 9 Inside Tint Window Envelope
Paper Stock Color
Black
Blue
Buff
Canary
Cherry
Clear
Cream
Custom
Goldrenrod
Gray
Green
Ivory
Lavender
Manilla
NCRPinkCanary
NCRWhiteBlue
NCRWhiteBlueCanary
NCRWhiteCanary
NCRWhiteCanaryPink
NCRWhiteCanaryPinkGoldenrod
NCRWhiteGreen
NCRWhiteGoldenrodYellow
NCRWhitePink
NCRWhiteWhite
Opaque
Orange
Orchid
Peach
Pink
Purple
Salmon
Tan
Violet
White
Finished Trim Sizes (listed - width x length)
11 x 17
18 x 24 Poster
24 x 36 Poster
3 x 5
36 x 24 Poster
4 x 6
475 x 7
475 x 775
55 x 85
6 x 4
7 x 9
7385 x 9 (RSI Std)
85 x 11
825 x 10875
825 x 11 (RA product profile std)
8375 x 10875
9 x 12
A4
A5
Other - Custom size listed below
Drilling Locations
1CENTER
1LEFTTOP
1TOPCENTER
2LEFT
2LEFT2TOP
2TOP
2TOP2LEFT
2TOP3LEFT
2TOP5LEFT
2TOP5RIGHT
3BOTTOM
3LEFT
3LEFT2TOP
3LEFT3TOP
3RIGHT
3TOP
3TOP5LEFT
5BOTTOM
5CENTER
5LEFT
5RIGHT
5RIGHT2TOP
5TOP
For TRI fold - select Z or C type Description
HALF Half
C C Fold
DBLEPARLL Double Parallel
OFFSETZ Offset Z
SAMPLE See Sample
SHORT Short Fold
V V Fold
Z Z Fold
Number of Pieces per Poly Wrap
Publication length Number per Poly Wrap
77 or more pages 1
33 to 76 pages 25
3 to 32 pages 50
1 or 2 pages 100
Comments
CoverText Stock Spine
100 Gloss Cover If your publication uses a spine make note of that in the comments field Be sure to include the spine as the last page of your PDF Do NOT include that page as part of the publication page count Because the addition of a spine will create an odd page count in the PDF contact a Super User to submit your publication via PDFdirect with an exception tool
100 Gloss Text
100 Text
10pt C1S Cover
10pt C2S Cover
10pt C2S Text
10pt Text Stock
110 White Index
12pt C1S Cover
20 White Opaque Bond
50 Colored Offset
50 White Offset
50 White Opaque
60 Cover Stock
60 White Offset
80 Gloss Cover
80 Gloss Text
8pt C1S White
90 White Index
CoverText Ink
Black
Black + 1 PMS color Type in PMS color
Black + 2 PMS colors Type in PMS colors
4 color
4 color over black
4 color + 1 PMS color Type in PMS color
4 color over black + 1 PMS color Type in PMS color
4 color + 2 PMS colors Type in PMS colors
4 color + aqueous
4 color + varnish
dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Cannot use quote symbol that is---- Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information White RRD must provide this information NA NA NA NA NA NA 85 11 SIDE NA NA NA NA HALF 85 x 11 50 RRD must provide this information
dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B NA PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information GLOSS TEXT 80 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA NA NA NA HALF 85 x 11 RRD must provide this information
dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
EA 1 1 See DocMan for the Cost Center selections associated with each Business Group Black amp White B PERFECT PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 2 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA 516 3LEFT NA NA NA NA RRD must provide this information Cover Stock = 90 White IndexText Stock = 20 White Opaque BondCover Ink = BlackText Ink = BlackSpine = If included as last page of PDF
dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions EA 1 1 Marketing Commercial Marketing Other November 2008 5 Black amp White B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 4 16 4 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 475 7 SIDE NA NA NA HALF 425 x 7 50 RRD must provide this information Text Stock = 20 White Opaque BondText Ink = Black PN-25192
Corp 17501
Bill To 69
dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions EA 1 1 Marketing Commercial Marketing Other November 2008 5 Black amp White B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 4 16 4 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 475 7 SIDE NA NA NA HALF 425 x 7 50 RRD must provide this information Text Stock = 20 White Opaque BondText Ink = Black PN-25192
Page 19: USB-to-ControlNet Cable - Rockwell Automationliterature.rockwellautomation.com/idc/groups/literature/documents/... · USB-to-ControlNet Cable Catalog Number 1784-U2CN Topic Page Important

IN RN pub type specs

UM RM PM pub type specs

AP PP pub type specs

BR pub type specs

Field definitions

ampL04032006ampRampP
PackagingOrdering Unit Of Measure
EA = Each
PK = Pack
PD = Pad
RL = Roll
BK = Book
CT = Carton
BX = Box
ST = Set
Multiple Order Qty
Separate methods of ordering same item For example if an item is packaged 50 per pad 5 pads per carton You can set the order qty as 50 each (one pad) or 250 each (1 ctn)
Business Group
The business group that the publication supports Your choice here determines the list you choose from for Cost Center
CorporateBusiness Development
Finance
Human Resources
IT
Logistics
Manufacturing
Marketing Commercial
Marketing Europe
Marketing Other
Operations
Order Services
Other
Process Improvement
Procurement
Quality
Sales
Max Order Quantity
Presale items = 100
Postsale items = 5
NOTE You can use other quantities but the delivery may take a bit longer because a system admin must approve it
Item Category - Form (F) or Book (B)
Form (F) = Any publication that is a single sheet (ie 1 or 2 pages) an envelope or carbonless form
Book (B) = Any publication that contains 3 or more pages
BindingStitching
For a Form (F) use
CARBONLESS
CUTSHEET
ENVELOPE
For a Book (B) use
LOOSE LOOSE -Loose Leaf
PERFECT PERFECT - Perfect Bound
PLASTCOIL PLASTCOIL - Plastic Coil (Coil Bound)
SADDLE SADDLE - Saddle Stitch
STAPLED1 STAPLED1 -1 position
STAPLED1B STAPLED1B - bottom 1 position
STAPLED2 STAPLED2 - 2 positions
THERMAL THERMAL - Thermal bound (Tape bound)
THERMALO THERMALO - Thermal Bound (Tape bound - offline)
WIRE O Wire O - Double Wire Bound (offline)
Saddle-Stitch Items
20 sheets max on 20 (text and cover)
19 sheets max on 20 (text) and 24 (cover)
18 sheets max on 24 (text and cover)
All page quantities must be divisible by 4
Tape Bound Items
125 sheets max on 20 no cover
120 sheets max wcover (90 index unless indicated otherwise)
Perfect Bound Items
475 sheets max on 20 no cover
470 sheets max wcover (90 index unless indicated otherwise)
Double Wire Bound Items
40 sheets max on 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
Coil Bound Items
290 sheets max of 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
Sides Printed
Head2Head = Most common Double-sided printing with headers on both pages lining up at the top of the page
Simplex = Single-sided printing
Head2Toe = Least common Double-sided printing with header on one page lining up with the footer on the other page
Number of Forms to a Sheet
Number of publication pages printed on a sheet of paper at the printerFor example if a 4-page 85 x 11 publication is printed on the front and back sides of an 11 x 17 sheet of paper that is folded in half the Number of Forms to a Sheet = 4Example 2 If a 4-page 55 x 85 publication is printed on the front and back sides of an 85 x 11 sheet of paper that is folded in half the Number of forms to a Sheet = 4
Number of Sheets Required to Print
Number of sheets of paper required to print the publicationFor example if a 16-page 85 x 11 publication is printed on the front and back sides of four 11 x 17 sheets of paper that are folded in half and saddle stitched together the Number of Sheets Required to Print = 4Example 4 If a 4-page 55 x 85 publication is printed on the front and back sides of one 85 x 11 sheet of paper that is folded in half the Number of Sheets Required to Print = 1
Paper Stock Type
Description
PLAIN Bond
ACNTCVR Accent Cover
BOND3H Bond (3-hole)
BOOKENV Booklet Envelope
C1SGLOSS C1S Gloss Finish
C1SMATTE C1S Matt Finish
C2SGLOSS C2S Gloss Finish
C2SMATTE C2S Matt Finish
CARD Card Stock
CATLGENV Catalog Envelope
CATLGENV6 6 Catalog Envelope
COVERCOLOR Color Cover Copy
CRCKPEEL Crack N Peel Label
CUSTOM Custom
CVRFUTURA Futura Cover
ENV6x9 Standard 6X9 Envelope
ENV9X12 Standard 9X12 Envelope
ETHCERT Ethicon Certificate
GLOSSCOVER Gloss Cover
GLOSSTEXT Gloss Text
HOTSTEXT Hots Text
INDEX Index
LABEL80 80 Up Label
MICROPRT Micro Print
OFFSET Offset
PART2 2 Part
PART3 3 Part
PART4 4 Part
PART5 5 Part
PART6 6 Part
PERF 12 inch Perfed
PERMMAT Perm Mat Ad
PRECUTTAB Pre-Cut Tab
PREPERF Pre-Perforated
RECYL Recycled
SE10ENV 10 Standard Envelope
SE10ITENV 10 Inside Tint Envelope
SE9ENV 9 Stanard Envelope
TAG Tag
TEXT Text
TEXTCOLOR Text Color Copy
TEXTFUTURA Futura Text
TEXTLASER Text Laser Print
TRANSPRNCY Transparencies
VELLUM Vellum
VELLUM3HP Vellum 3HP
WE10ENV 10 Window Envelope
WE9ENV 9 Windor Envelope
WE9ITENV 9 Inside Tint Window Envelope
Paper Stock Color
Black
Blue
Buff
Canary
Cherry
Clear
Cream
Custom
Goldrenrod
Gray
Green
Ivory
Lavender
Manilla
NCRPinkCanary
NCRWhiteBlue
NCRWhiteBlueCanary
NCRWhiteCanary
NCRWhiteCanaryPink
NCRWhiteCanaryPinkGoldenrod
NCRWhiteGreen
NCRWhiteGoldenrodYellow
NCRWhitePink
NCRWhiteWhite
Opaque
Orange
Orchid
Peach
Pink
Purple
Salmon
Tan
Violet
White
Finished Trim Sizes (listed - width x length)
11 x 17
18 x 24 Poster
24 x 36 Poster
3 x 5
36 x 24 Poster
4 x 6
475 x 7
475 x 775
55 x 85
6 x 4
7 x 9
7385 x 9 (RSI Std)
85 x 11
825 x 10875
825 x 11 (RA product profile std)
8375 x 10875
9 x 12
A4
A5
Other - Custom size listed below
Drilling Locations
1CENTER
1LEFTTOP
1TOPCENTER
2LEFT
2LEFT2TOP
2TOP
2TOP2LEFT
2TOP3LEFT
2TOP5LEFT
2TOP5RIGHT
3BOTTOM
3LEFT
3LEFT2TOP
3LEFT3TOP
3RIGHT
3TOP
3TOP5LEFT
5BOTTOM
5CENTER
5LEFT
5RIGHT
5RIGHT2TOP
5TOP
For TRI fold - select Z or C type Description
HALF Half
C C Fold
DBLEPARLL Double Parallel
OFFSETZ Offset Z
SAMPLE See Sample
SHORT Short Fold
V V Fold
Z Z Fold
Number of Pieces per Poly Wrap
Publication length Number per Poly Wrap
77 or more pages 1
33 to 76 pages 25
3 to 32 pages 50
1 or 2 pages 100
Comments
CoverText Stock Spine
100 Gloss Cover If your publication uses a spine make note of that in the comments field Be sure to include the spine as the last page of your PDF Do NOT include that page as part of the publication page count Because the addition of a spine will create an odd page count in the PDF contact a Super User to submit your publication via PDFdirect with an exception tool
100 Gloss Text
100 Text
10pt C1S Cover
10pt C2S Cover
10pt C2S Text
10pt Text Stock
110 White Index
12pt C1S Cover
20 White Opaque Bond
50 Colored Offset
50 White Offset
50 White Opaque
60 Cover Stock
60 White Offset
80 Gloss Cover
80 Gloss Text
8pt C1S White
90 White Index
CoverText Ink
Black
Black + 1 PMS color Type in PMS color
Black + 2 PMS colors Type in PMS colors
4 color
4 color over black
4 color + 1 PMS color Type in PMS color
4 color over black + 1 PMS color Type in PMS color
4 color + 2 PMS colors Type in PMS colors
4 color + aqueous
4 color + varnish
dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Cannot use quote symbol that is---- Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information White RRD must provide this information NA NA NA NA NA NA 85 11 SIDE NA NA NA NA HALF 85 x 11 50 RRD must provide this information
dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B NA PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information GLOSS TEXT 80 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA NA NA NA HALF 85 x 11 RRD must provide this information
dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
EA 1 1 See DocMan for the Cost Center selections associated with each Business Group Black amp White B PERFECT PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 2 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA 516 3LEFT NA NA NA NA RRD must provide this information Cover Stock = 90 White IndexText Stock = 20 White Opaque BondCover Ink = BlackText Ink = BlackSpine = If included as last page of PDF
dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
1784-IN047A-EN-P USB-to-ControlNet Cable Installation Instructions EA 1 1 Marketing Commercial Marketing Other November 2008 5 Black amp White B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 4 16 4 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 475 7 SIDE NA NA NA HALF 425 x 7 50 RRD must provide this information Text Stock = 20 White Opaque BondText Ink = Black PN-25192
Page 20: USB-to-ControlNet Cable - Rockwell Automationliterature.rockwellautomation.com/idc/groups/literature/documents/... · USB-to-ControlNet Cable Catalog Number 1784-U2CN Topic Page Important

UM RM PM pub type specs

AP PP pub type specs

BR pub type specs

Field definitions

ampL04032006ampRampP
PackagingOrdering Unit Of Measure
EA = Each
PK = Pack
PD = Pad
RL = Roll
BK = Book
CT = Carton
BX = Box
ST = Set
Multiple Order Qty
Separate methods of ordering same item For example if an item is packaged 50 per pad 5 pads per carton You can set the order qty as 50 each (one pad) or 250 each (1 ctn)
Business Group
The business group that the publication supports Your choice here determines the list you choose from for Cost Center
CorporateBusiness Development
Finance
Human Resources
IT
Logistics
Manufacturing
Marketing Commercial
Marketing Europe
Marketing Other
Operations
Order Services
Other
Process Improvement
Procurement
Quality
Sales
Max Order Quantity
Presale items = 100
Postsale items = 5
NOTE You can use other quantities but the delivery may take a bit longer because a system admin must approve it
Item Category - Form (F) or Book (B)
Form (F) = Any publication that is a single sheet (ie 1 or 2 pages) an envelope or carbonless form
Book (B) = Any publication that contains 3 or more pages
BindingStitching
For a Form (F) use
CARBONLESS
CUTSHEET
ENVELOPE
For a Book (B) use
LOOSE LOOSE -Loose Leaf
PERFECT PERFECT - Perfect Bound
PLASTCOIL PLASTCOIL - Plastic Coil (Coil Bound)
SADDLE SADDLE - Saddle Stitch
STAPLED1 STAPLED1 -1 position
STAPLED1B STAPLED1B - bottom 1 position
STAPLED2 STAPLED2 - 2 positions
THERMAL THERMAL - Thermal bound (Tape bound)
THERMALO THERMALO - Thermal Bound (Tape bound - offline)
WIRE O Wire O - Double Wire Bound (offline)
Saddle-Stitch Items
20 sheets max on 20 (text and cover)
19 sheets max on 20 (text) and 24 (cover)
18 sheets max on 24 (text and cover)
All page quantities must be divisible by 4
Tape Bound Items
125 sheets max on 20 no cover
120 sheets max wcover (90 index unless indicated otherwise)
Perfect Bound Items
475 sheets max on 20 no cover
470 sheets max wcover (90 index unless indicated otherwise)
Double Wire Bound Items
40 sheets max on 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
Coil Bound Items
290 sheets max of 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
Sides Printed
Head2Head = Most common Double-sided printing with headers on both pages lining up at the top of the page
Simplex = Single-sided printing
Head2Toe = Least common Double-sided printing with header on one page lining up with the footer on the other page
Number of Forms to a Sheet
Number of publication pages printed on a sheet of paper at the printerFor example if a 4-page 85 x 11 publication is printed on the front and back sides of an 11 x 17 sheet of paper that is folded in half the Number of Forms to a Sheet = 4Example 2 If a 4-page 55 x 85 publication is printed on the front and back sides of an 85 x 11 sheet of paper that is folded in half the Number of forms to a Sheet = 4
Number of Sheets Required to Print
Number of sheets of paper required to print the publicationFor example if a 16-page 85 x 11 publication is printed on the front and back sides of four 11 x 17 sheets of paper that are folded in half and saddle stitched together the Number of Sheets Required to Print = 4Example 4 If a 4-page 55 x 85 publication is printed on the front and back sides of one 85 x 11 sheet of paper that is folded in half the Number of Sheets Required to Print = 1
Paper Stock Type
Description
PLAIN Bond
ACNTCVR Accent Cover
BOND3H Bond (3-hole)
BOOKENV Booklet Envelope
C1SGLOSS C1S Gloss Finish
C1SMATTE C1S Matt Finish
C2SGLOSS C2S Gloss Finish
C2SMATTE C2S Matt Finish
CARD Card Stock
CATLGENV Catalog Envelope
CATLGENV6 6 Catalog Envelope
COVERCOLOR Color Cover Copy
CRCKPEEL Crack N Peel Label
CUSTOM Custom
CVRFUTURA Futura Cover
ENV6x9 Standard 6X9 Envelope
ENV9X12 Standard 9X12 Envelope
ETHCERT Ethicon Certificate
GLOSSCOVER Gloss Cover
GLOSSTEXT Gloss Text
HOTSTEXT Hots Text
INDEX Index
LABEL80 80 Up Label
MICROPRT Micro Print
OFFSET Offset
PART2 2 Part
PART3 3 Part
PART4 4 Part
PART5 5 Part
PART6 6 Part
PERF 12 inch Perfed
PERMMAT Perm Mat Ad
PRECUTTAB Pre-Cut Tab
PREPERF Pre-Perforated
RECYL Recycled
SE10ENV 10 Standard Envelope
SE10ITENV 10 Inside Tint Envelope
SE9ENV 9 Stanard Envelope
TAG Tag
TEXT Text
TEXTCOLOR Text Color Copy
TEXTFUTURA Futura Text
TEXTLASER Text Laser Print
TRANSPRNCY Transparencies
VELLUM Vellum
VELLUM3HP Vellum 3HP
WE10ENV 10 Window Envelope
WE9ENV 9 Windor Envelope
WE9ITENV 9 Inside Tint Window Envelope
Paper Stock Color
Black
Blue
Buff
Canary
Cherry
Clear
Cream
Custom
Goldrenrod
Gray
Green
Ivory
Lavender
Manilla
NCRPinkCanary
NCRWhiteBlue
NCRWhiteBlueCanary
NCRWhiteCanary
NCRWhiteCanaryPink
NCRWhiteCanaryPinkGoldenrod
NCRWhiteGreen
NCRWhiteGoldenrodYellow
NCRWhitePink
NCRWhiteWhite
Opaque
Orange
Orchid
Peach
Pink
Purple
Salmon
Tan
Violet
White
Finished Trim Sizes (listed - width x length)
11 x 17
18 x 24 Poster
24 x 36 Poster
3 x 5
36 x 24 Poster
4 x 6
475 x 7
475 x 775
55 x 85
6 x 4
7 x 9
7385 x 9 (RSI Std)
85 x 11
825 x 10875
825 x 11 (RA product profile std)
8375 x 10875
9 x 12
A4
A5
Other - Custom size listed below
Drilling Locations
1CENTER
1LEFTTOP
1TOPCENTER
2LEFT
2LEFT2TOP
2TOP
2TOP2LEFT
2TOP3LEFT
2TOP5LEFT
2TOP5RIGHT
3BOTTOM
3LEFT
3LEFT2TOP
3LEFT3TOP
3RIGHT
3TOP
3TOP5LEFT
5BOTTOM
5CENTER
5LEFT
5RIGHT
5RIGHT2TOP
5TOP
For TRI fold - select Z or C type Description
HALF Half
C C Fold
DBLEPARLL Double Parallel
OFFSETZ Offset Z
SAMPLE See Sample
SHORT Short Fold
V V Fold
Z Z Fold
Number of Pieces per Poly Wrap
Publication length Number per Poly Wrap
77 or more pages 1
33 to 76 pages 25
3 to 32 pages 50
1 or 2 pages 100
Comments
CoverText Stock Spine
100 Gloss Cover If your publication uses a spine make note of that in the comments field Be sure to include the spine as the last page of your PDF Do NOT include that page as part of the publication page count Because the addition of a spine will create an odd page count in the PDF contact a Super User to submit your publication via PDFdirect with an exception tool
100 Gloss Text
100 Text
10pt C1S Cover
10pt C2S Cover
10pt C2S Text
10pt Text Stock
110 White Index
12pt C1S Cover
20 White Opaque Bond
50 Colored Offset
50 White Offset
50 White Opaque
60 Cover Stock
60 White Offset
80 Gloss Cover
80 Gloss Text
8pt C1S White
90 White Index
CoverText Ink
Black
Black + 1 PMS color Type in PMS color
Black + 2 PMS colors Type in PMS colors
4 color
4 color over black
4 color + 1 PMS color Type in PMS color
4 color over black + 1 PMS color Type in PMS color
4 color + 2 PMS colors Type in PMS colors
4 color + aqueous
4 color + varnish
dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Cannot use quote symbol that is---- Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information White RRD must provide this information NA NA NA NA NA NA 85 11 SIDE NA NA NA NA HALF 85 x 11 50 RRD must provide this information
dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B NA PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information GLOSS TEXT 80 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA NA NA NA HALF 85 x 11 RRD must provide this information
dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
EA 1 1 See DocMan for the Cost Center selections associated with each Business Group Black amp White B PERFECT PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information 2 PLAIN 20 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA 516 3LEFT NA NA NA NA RRD must provide this information Cover Stock = 90 White IndexText Stock = 20 White Opaque BondCover Ink = BlackText Ink = BlackSpine = If included as last page of PDF
Page 21: USB-to-ControlNet Cable - Rockwell Automationliterature.rockwellautomation.com/idc/groups/literature/documents/... · USB-to-ControlNet Cable Catalog Number 1784-U2CN Topic Page Important

AP PP pub type specs

BR pub type specs

Field definitions

ampL04032006ampRampP
PackagingOrdering Unit Of Measure
EA = Each
PK = Pack
PD = Pad
RL = Roll
BK = Book
CT = Carton
BX = Box
ST = Set
Multiple Order Qty
Separate methods of ordering same item For example if an item is packaged 50 per pad 5 pads per carton You can set the order qty as 50 each (one pad) or 250 each (1 ctn)
Business Group
The business group that the publication supports Your choice here determines the list you choose from for Cost Center
CorporateBusiness Development
Finance
Human Resources
IT
Logistics
Manufacturing
Marketing Commercial
Marketing Europe
Marketing Other
Operations
Order Services
Other
Process Improvement
Procurement
Quality
Sales
Max Order Quantity
Presale items = 100
Postsale items = 5
NOTE You can use other quantities but the delivery may take a bit longer because a system admin must approve it
Item Category - Form (F) or Book (B)
Form (F) = Any publication that is a single sheet (ie 1 or 2 pages) an envelope or carbonless form
Book (B) = Any publication that contains 3 or more pages
BindingStitching
For a Form (F) use
CARBONLESS
CUTSHEET
ENVELOPE
For a Book (B) use
LOOSE LOOSE -Loose Leaf
PERFECT PERFECT - Perfect Bound
PLASTCOIL PLASTCOIL - Plastic Coil (Coil Bound)
SADDLE SADDLE - Saddle Stitch
STAPLED1 STAPLED1 -1 position
STAPLED1B STAPLED1B - bottom 1 position
STAPLED2 STAPLED2 - 2 positions
THERMAL THERMAL - Thermal bound (Tape bound)
THERMALO THERMALO - Thermal Bound (Tape bound - offline)
WIRE O Wire O - Double Wire Bound (offline)
Saddle-Stitch Items
20 sheets max on 20 (text and cover)
19 sheets max on 20 (text) and 24 (cover)
18 sheets max on 24 (text and cover)
All page quantities must be divisible by 4
Tape Bound Items
125 sheets max on 20 no cover
120 sheets max wcover (90 index unless indicated otherwise)
Perfect Bound Items
475 sheets max on 20 no cover
470 sheets max wcover (90 index unless indicated otherwise)
Double Wire Bound Items
40 sheets max on 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
Coil Bound Items
290 sheets max of 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
Sides Printed
Head2Head = Most common Double-sided printing with headers on both pages lining up at the top of the page
Simplex = Single-sided printing
Head2Toe = Least common Double-sided printing with header on one page lining up with the footer on the other page
Number of Forms to a Sheet
Number of publication pages printed on a sheet of paper at the printerFor example if a 4-page 85 x 11 publication is printed on the front and back sides of an 11 x 17 sheet of paper that is folded in half the Number of Forms to a Sheet = 4Example 2 If a 4-page 55 x 85 publication is printed on the front and back sides of an 85 x 11 sheet of paper that is folded in half the Number of forms to a Sheet = 4
Number of Sheets Required to Print
Number of sheets of paper required to print the publicationFor example if a 16-page 85 x 11 publication is printed on the front and back sides of four 11 x 17 sheets of paper that are folded in half and saddle stitched together the Number of Sheets Required to Print = 4Example 4 If a 4-page 55 x 85 publication is printed on the front and back sides of one 85 x 11 sheet of paper that is folded in half the Number of Sheets Required to Print = 1
Paper Stock Type
Description
PLAIN Bond
ACNTCVR Accent Cover
BOND3H Bond (3-hole)
BOOKENV Booklet Envelope
C1SGLOSS C1S Gloss Finish
C1SMATTE C1S Matt Finish
C2SGLOSS C2S Gloss Finish
C2SMATTE C2S Matt Finish
CARD Card Stock
CATLGENV Catalog Envelope
CATLGENV6 6 Catalog Envelope
COVERCOLOR Color Cover Copy
CRCKPEEL Crack N Peel Label
CUSTOM Custom
CVRFUTURA Futura Cover
ENV6x9 Standard 6X9 Envelope
ENV9X12 Standard 9X12 Envelope
ETHCERT Ethicon Certificate
GLOSSCOVER Gloss Cover
GLOSSTEXT Gloss Text
HOTSTEXT Hots Text
INDEX Index
LABEL80 80 Up Label
MICROPRT Micro Print
OFFSET Offset
PART2 2 Part
PART3 3 Part
PART4 4 Part
PART5 5 Part
PART6 6 Part
PERF 12 inch Perfed
PERMMAT Perm Mat Ad
PRECUTTAB Pre-Cut Tab
PREPERF Pre-Perforated
RECYL Recycled
SE10ENV 10 Standard Envelope
SE10ITENV 10 Inside Tint Envelope
SE9ENV 9 Stanard Envelope
TAG Tag
TEXT Text
TEXTCOLOR Text Color Copy
TEXTFUTURA Futura Text
TEXTLASER Text Laser Print
TRANSPRNCY Transparencies
VELLUM Vellum
VELLUM3HP Vellum 3HP
WE10ENV 10 Window Envelope
WE9ENV 9 Windor Envelope
WE9ITENV 9 Inside Tint Window Envelope
Paper Stock Color
Black
Blue
Buff
Canary
Cherry
Clear
Cream
Custom
Goldrenrod
Gray
Green
Ivory
Lavender
Manilla
NCRPinkCanary
NCRWhiteBlue
NCRWhiteBlueCanary
NCRWhiteCanary
NCRWhiteCanaryPink
NCRWhiteCanaryPinkGoldenrod
NCRWhiteGreen
NCRWhiteGoldenrodYellow
NCRWhitePink
NCRWhiteWhite
Opaque
Orange
Orchid
Peach
Pink
Purple
Salmon
Tan
Violet
White
Finished Trim Sizes (listed - width x length)
11 x 17
18 x 24 Poster
24 x 36 Poster
3 x 5
36 x 24 Poster
4 x 6
475 x 7
475 x 775
55 x 85
6 x 4
7 x 9
7385 x 9 (RSI Std)
85 x 11
825 x 10875
825 x 11 (RA product profile std)
8375 x 10875
9 x 12
A4
A5
Other - Custom size listed below
Drilling Locations
1CENTER
1LEFTTOP
1TOPCENTER
2LEFT
2LEFT2TOP
2TOP
2TOP2LEFT
2TOP3LEFT
2TOP5LEFT
2TOP5RIGHT
3BOTTOM
3LEFT
3LEFT2TOP
3LEFT3TOP
3RIGHT
3TOP
3TOP5LEFT
5BOTTOM
5CENTER
5LEFT
5RIGHT
5RIGHT2TOP
5TOP
For TRI fold - select Z or C type Description
HALF Half
C C Fold
DBLEPARLL Double Parallel
OFFSETZ Offset Z
SAMPLE See Sample
SHORT Short Fold
V V Fold
Z Z Fold
Number of Pieces per Poly Wrap
Publication length Number per Poly Wrap
77 or more pages 1
33 to 76 pages 25
3 to 32 pages 50
1 or 2 pages 100
Comments
CoverText Stock Spine
100 Gloss Cover If your publication uses a spine make note of that in the comments field Be sure to include the spine as the last page of your PDF Do NOT include that page as part of the publication page count Because the addition of a spine will create an odd page count in the PDF contact a Super User to submit your publication via PDFdirect with an exception tool
100 Gloss Text
100 Text
10pt C1S Cover
10pt C2S Cover
10pt C2S Text
10pt Text Stock
110 White Index
12pt C1S Cover
20 White Opaque Bond
50 Colored Offset
50 White Offset
50 White Opaque
60 Cover Stock
60 White Offset
80 Gloss Cover
80 Gloss Text
8pt C1S White
90 White Index
CoverText Ink
Black
Black + 1 PMS color Type in PMS color
Black + 2 PMS colors Type in PMS colors
4 color
4 color over black
4 color + 1 PMS color Type in PMS color
4 color over black + 1 PMS color Type in PMS color
4 color + 2 PMS colors Type in PMS colors
4 color + aqueous
4 color + varnish
dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Cannot use quote symbol that is---- Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information White RRD must provide this information NA NA NA NA NA NA 85 11 SIDE NA NA NA NA HALF 85 x 11 50 RRD must provide this information
dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Item Description Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B NA PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information GLOSS TEXT 80 White RRD must provide this information NA NA NA NA NA NA NA 85 11 NA NA NA NA HALF 85 x 11 RRD must provide this information
Page 22: USB-to-ControlNet Cable - Rockwell Automationliterature.rockwellautomation.com/idc/groups/literature/documents/... · USB-to-ControlNet Cable Catalog Number 1784-U2CN Topic Page Important

BR pub type specs

Field definitions

ampL04032006ampRampP
PackagingOrdering Unit Of Measure
EA = Each
PK = Pack
PD = Pad
RL = Roll
BK = Book
CT = Carton
BX = Box
ST = Set
Multiple Order Qty
Separate methods of ordering same item For example if an item is packaged 50 per pad 5 pads per carton You can set the order qty as 50 each (one pad) or 250 each (1 ctn)
Business Group
The business group that the publication supports Your choice here determines the list you choose from for Cost Center
CorporateBusiness Development
Finance
Human Resources
IT
Logistics
Manufacturing
Marketing Commercial
Marketing Europe
Marketing Other
Operations
Order Services
Other
Process Improvement
Procurement
Quality
Sales
Max Order Quantity
Presale items = 100
Postsale items = 5
NOTE You can use other quantities but the delivery may take a bit longer because a system admin must approve it
Item Category - Form (F) or Book (B)
Form (F) = Any publication that is a single sheet (ie 1 or 2 pages) an envelope or carbonless form
Book (B) = Any publication that contains 3 or more pages
BindingStitching
For a Form (F) use
CARBONLESS
CUTSHEET
ENVELOPE
For a Book (B) use
LOOSE LOOSE -Loose Leaf
PERFECT PERFECT - Perfect Bound
PLASTCOIL PLASTCOIL - Plastic Coil (Coil Bound)
SADDLE SADDLE - Saddle Stitch
STAPLED1 STAPLED1 -1 position
STAPLED1B STAPLED1B - bottom 1 position
STAPLED2 STAPLED2 - 2 positions
THERMAL THERMAL - Thermal bound (Tape bound)
THERMALO THERMALO - Thermal Bound (Tape bound - offline)
WIRE O Wire O - Double Wire Bound (offline)
Saddle-Stitch Items
20 sheets max on 20 (text and cover)
19 sheets max on 20 (text) and 24 (cover)
18 sheets max on 24 (text and cover)
All page quantities must be divisible by 4
Tape Bound Items
125 sheets max on 20 no cover
120 sheets max wcover (90 index unless indicated otherwise)
Perfect Bound Items
475 sheets max on 20 no cover
470 sheets max wcover (90 index unless indicated otherwise)
Double Wire Bound Items
40 sheets max on 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
Coil Bound Items
290 sheets max of 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
Sides Printed
Head2Head = Most common Double-sided printing with headers on both pages lining up at the top of the page
Simplex = Single-sided printing
Head2Toe = Least common Double-sided printing with header on one page lining up with the footer on the other page
Number of Forms to a Sheet
Number of publication pages printed on a sheet of paper at the printerFor example if a 4-page 85 x 11 publication is printed on the front and back sides of an 11 x 17 sheet of paper that is folded in half the Number of Forms to a Sheet = 4Example 2 If a 4-page 55 x 85 publication is printed on the front and back sides of an 85 x 11 sheet of paper that is folded in half the Number of forms to a Sheet = 4
Number of Sheets Required to Print
Number of sheets of paper required to print the publicationFor example if a 16-page 85 x 11 publication is printed on the front and back sides of four 11 x 17 sheets of paper that are folded in half and saddle stitched together the Number of Sheets Required to Print = 4Example 4 If a 4-page 55 x 85 publication is printed on the front and back sides of one 85 x 11 sheet of paper that is folded in half the Number of Sheets Required to Print = 1
Paper Stock Type
Description
PLAIN Bond
ACNTCVR Accent Cover
BOND3H Bond (3-hole)
BOOKENV Booklet Envelope
C1SGLOSS C1S Gloss Finish
C1SMATTE C1S Matt Finish
C2SGLOSS C2S Gloss Finish
C2SMATTE C2S Matt Finish
CARD Card Stock
CATLGENV Catalog Envelope
CATLGENV6 6 Catalog Envelope
COVERCOLOR Color Cover Copy
CRCKPEEL Crack N Peel Label
CUSTOM Custom
CVRFUTURA Futura Cover
ENV6x9 Standard 6X9 Envelope
ENV9X12 Standard 9X12 Envelope
ETHCERT Ethicon Certificate
GLOSSCOVER Gloss Cover
GLOSSTEXT Gloss Text
HOTSTEXT Hots Text
INDEX Index
LABEL80 80 Up Label
MICROPRT Micro Print
OFFSET Offset
PART2 2 Part
PART3 3 Part
PART4 4 Part
PART5 5 Part
PART6 6 Part
PERF 12 inch Perfed
PERMMAT Perm Mat Ad
PRECUTTAB Pre-Cut Tab
PREPERF Pre-Perforated
RECYL Recycled
SE10ENV 10 Standard Envelope
SE10ITENV 10 Inside Tint Envelope
SE9ENV 9 Stanard Envelope
TAG Tag
TEXT Text
TEXTCOLOR Text Color Copy
TEXTFUTURA Futura Text
TEXTLASER Text Laser Print
TRANSPRNCY Transparencies
VELLUM Vellum
VELLUM3HP Vellum 3HP
WE10ENV 10 Window Envelope
WE9ENV 9 Windor Envelope
WE9ITENV 9 Inside Tint Window Envelope
Paper Stock Color
Black
Blue
Buff
Canary
Cherry
Clear
Cream
Custom
Goldrenrod
Gray
Green
Ivory
Lavender
Manilla
NCRPinkCanary
NCRWhiteBlue
NCRWhiteBlueCanary
NCRWhiteCanary
NCRWhiteCanaryPink
NCRWhiteCanaryPinkGoldenrod
NCRWhiteGreen
NCRWhiteGoldenrodYellow
NCRWhitePink
NCRWhiteWhite
Opaque
Orange
Orchid
Peach
Pink
Purple
Salmon
Tan
Violet
White
Finished Trim Sizes (listed - width x length)
11 x 17
18 x 24 Poster
24 x 36 Poster
3 x 5
36 x 24 Poster
4 x 6
475 x 7
475 x 775
55 x 85
6 x 4
7 x 9
7385 x 9 (RSI Std)
85 x 11
825 x 10875
825 x 11 (RA product profile std)
8375 x 10875
9 x 12
A4
A5
Other - Custom size listed below
Drilling Locations
1CENTER
1LEFTTOP
1TOPCENTER
2LEFT
2LEFT2TOP
2TOP
2TOP2LEFT
2TOP3LEFT
2TOP5LEFT
2TOP5RIGHT
3BOTTOM
3LEFT
3LEFT2TOP
3LEFT3TOP
3RIGHT
3TOP
3TOP5LEFT
5BOTTOM
5CENTER
5LEFT
5RIGHT
5RIGHT2TOP
5TOP
For TRI fold - select Z or C type Description
HALF Half
C C Fold
DBLEPARLL Double Parallel
OFFSETZ Offset Z
SAMPLE See Sample
SHORT Short Fold
V V Fold
Z Z Fold
Number of Pieces per Poly Wrap
Publication length Number per Poly Wrap
77 or more pages 1
33 to 76 pages 25
3 to 32 pages 50
1 or 2 pages 100
Comments
CoverText Stock Spine
100 Gloss Cover If your publication uses a spine make note of that in the comments field Be sure to include the spine as the last page of your PDF Do NOT include that page as part of the publication page count Because the addition of a spine will create an odd page count in the PDF contact a Super User to submit your publication via PDFdirect with an exception tool
100 Gloss Text
100 Text
10pt C1S Cover
10pt C2S Cover
10pt C2S Text
10pt Text Stock
110 White Index
12pt C1S Cover
20 White Opaque Bond
50 Colored Offset
50 White Offset
50 White Opaque
60 Cover Stock
60 White Offset
80 Gloss Cover
80 Gloss Text
8pt C1S White
90 White Index
CoverText Ink
Black
Black + 1 PMS color Type in PMS color
Black + 2 PMS colors Type in PMS colors
4 color
4 color over black
4 color + 1 PMS color Type in PMS color
4 color over black + 1 PMS color Type in PMS color
4 color + 2 PMS colors Type in PMS colors
4 color + aqueous
4 color + varnish
dPrint ContentComp Split Shipment Indicator Flag WCSS Item Number Customer Item Number Cannot use quote symbol that is---- Producing Plant Job Number Replenishing Plant Plant Code Product Code PackagingOrdering UOM Qty per PackagingOrdering UOM List Price Per Ea Transfer Cost per Ea Sell Price per Ea Standard Cost (per Ea) Min Order Qty (in eaches) Multiple Order Qty (in Eaches Chargeback Price Item Reference 1 Item Reference 2 Revision Field Max Order Qty (in eaches) Sequentially Numbered Item Sequentially Numbered Item - Details Priced for Digital or Offset Content File Location Item Category Form (F) Book (B) Item Subtype Orientation Sides Printed CSSJLS Stock Componet Paper Size Width Paper Size Length No of Forms to a Sheet Page Qty Sheets Qty CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size of Tabs Binder Size Binder Color Binder Ring Type Binder Transparency (clearview or matt) Thermal Tape Color Trim Size Width Trim Size Length Stitching Location Drilling Size Drilling Location Glue Location Pad Fold Type Fold At Poly Box Comments Cross Reference Item Number 1
Publication Number Publication Title PackagingOrdering Unit Of Measure Qty per PackagingOrdering Unit of Measure Min Order Qty Multiple Order Qty Business Group Cost Center Revision Date Max Order Qty Black amp Whiteor Color Item CategoryForm (F) or Book (B) BindingStitching Orientation Sides Printed Printing Paper Size Width Printing Paper Size Length Number of Forms to a Sheet Page Count of Publication Number of Sheets Required to Print CSSJLS Production Stock Paper Stock Type Paper Stock Weight Paper Stock Color Stack Offset Tab Size Number of Tabs Needed Binder Size Binder Color Binder Ring Type Binder Transparency Thermal Tape Color Finished Trim Size Width Finished Trim Size Length Stitching Location Drill Hole Size Number and Location of Drill Holes Glue Location Number of Pages per Pad Fold Type Fold At Number of Pieces per Poly wrap Number of Pieces per Box Comments Part Number
Are these items being setup on dPrint (Yes or No) If yes Inv Mgmt to check Print Management flag on item setup The contentComp will be provided by the CSC once the spec files are loaded to the DAS (the files must be named with the WCSS item ) The contentcomp must be hardcoded to the Item message Field in WCSS Must be a 10 Digit number that starts with an 8 Required Setting this to yes will allow warehouse product to ship out before the JIT item is completed Setting this to no will hold all warehoused items until the printing of this item is complete Please indicate Y or N Note Each item with a Y will always ship separately even if produced at the same time as like items Optional 15 Characters Max If the WCSS number provided already exists in the system then Inventory Management will assign a random WCSS number 30 characters maximum Cannot use quote symbol that is---- Required Which plantPrint Center will produce this item Required To be provided from the producing plant for JIT su Required What is the plant code of the plant that has owning rights to the dPrint files If produced at multiple plants there can be only one owning plant Required What is the plant code of the facility that will produce this item (see Plant and Whse Codes tab below) Required Enter one of the applicable product Method of packaging for publication shipmentClick here for explanation of each value in the pull-down Required This field auto-calculates (transfer cost divided by 5) Used to determine Standard Cost on WCSS (which is 50 of the list price for these product codes) Required Transfer Cost per orderingpackaging unit of measure Required Price that will be billed to customer upon order If Price Breaks enter Price Breaks and note them on separate spreadsheet Required Replacement Cost per Packagingordering UOM Click here for an explanation of this field otherwise type NA Optional Used to assist customer with internal Chargebacks to end users (per packagingordering UOM) IMPORTANT This information must match the DocMan recordClick here for explanation of each value in the pull-down menu IMPORTANT This information must match the DocMan record IMPORTANT This information must match the DocMan recordDate on the publication Click here for explanation of each value in the pull-down menu Indicate Yes or No Enter Yes if the item is a sequentially numbered item Describe the details behind the sequentially numbered item such as- Record Sequence Shipped whse will record the sequence numbers that shipped- Ship in Sequence Record required to ship products in particular sequence and the whse records the numbers Required If PDF is to be retained in the DAS enter DAS in this field if item is part of eCreate or Custom Docs put CUSTOM in this field Typically a BookClick here for explanation of each value in the pull-down menu Click here for explanation of each value in the pull-down Click here for explanation of each value in the pull-down menu Optional Use when finished product stored in the warehouse is to be inserted into the construction of a JIT book IMPORTANT Not Trim Size widthThis is the width of the paper on which the publication is printed IMPORTANT Not Trim Size lengthThis is the length of the paper on which the publication is printed Click here for explanation of how to determine the information required Click here for explanation of how to determine the information required Optional Use when product is being printed on Shell Stock Provide warehoused WCSS Item number of product to be used in the production of JIT item Click here for explanation of how to determine the information required The pull-down menu lists the most common choicesClick here for a full list of the available choicesIf you use a choice not in the pull-down list type the value in the cell below the pull-down menu If item uses tabs otherwise NA If needed otherwise type NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If item used in a binder otherwise NA If publication is thermal tape bound otherwise NA Click here to see the available finished trim sizesThe sizes are listed - width x length Click here to see the available finished trim sizesThe sizes are listed - width x length If publication is Book [B] and stapled otherwise NA Click here for a list of possible drill locations If publication uses padding otherwise NA If publication is a notepad or message pad otherwise NA Click here for explanation of each value in the pull-down menu Folding of final document optional The location(s) of the fold Click here for explanation of each value in the pull-down menu Use this column to list- Cover Stock- Text Stock- Cover Ink- Text Ink- Spine if necessaryAlso use to indicate any other production or finishing requirements not provided in previous columnsClick here for an explanation of the available Cover Stock Cover Ink and Text Ink values List only if pubication is used in manufacturing otherwise leave blank
PK 1 See DocMan for the Cost Center selections associated with each Business Group Color B SADDLE PORTRAIT HEAD2HEAD RRD must provide this information RRD must provide this information White RRD must provide this information NA NA NA NA NA NA 85 11 SIDE NA NA NA NA HALF 85 x 11 50 RRD must provide this information
Page 23: USB-to-ControlNet Cable - Rockwell Automationliterature.rockwellautomation.com/idc/groups/literature/documents/... · USB-to-ControlNet Cable Catalog Number 1784-U2CN Topic Page Important

Field definitions

ampL04032006ampRampP
PackagingOrdering Unit Of Measure
EA = Each
PK = Pack
PD = Pad
RL = Roll
BK = Book
CT = Carton
BX = Box
ST = Set
Multiple Order Qty
Separate methods of ordering same item For example if an item is packaged 50 per pad 5 pads per carton You can set the order qty as 50 each (one pad) or 250 each (1 ctn)
Business Group
The business group that the publication supports Your choice here determines the list you choose from for Cost Center
CorporateBusiness Development
Finance
Human Resources
IT
Logistics
Manufacturing
Marketing Commercial
Marketing Europe
Marketing Other
Operations
Order Services
Other
Process Improvement
Procurement
Quality
Sales
Max Order Quantity
Presale items = 100
Postsale items = 5
NOTE You can use other quantities but the delivery may take a bit longer because a system admin must approve it
Item Category - Form (F) or Book (B)
Form (F) = Any publication that is a single sheet (ie 1 or 2 pages) an envelope or carbonless form
Book (B) = Any publication that contains 3 or more pages
BindingStitching
For a Form (F) use
CARBONLESS
CUTSHEET
ENVELOPE
For a Book (B) use
LOOSE LOOSE -Loose Leaf
PERFECT PERFECT - Perfect Bound
PLASTCOIL PLASTCOIL - Plastic Coil (Coil Bound)
SADDLE SADDLE - Saddle Stitch
STAPLED1 STAPLED1 -1 position
STAPLED1B STAPLED1B - bottom 1 position
STAPLED2 STAPLED2 - 2 positions
THERMAL THERMAL - Thermal bound (Tape bound)
THERMALO THERMALO - Thermal Bound (Tape bound - offline)
WIRE O Wire O - Double Wire Bound (offline)
Saddle-Stitch Items
20 sheets max on 20 (text and cover)
19 sheets max on 20 (text) and 24 (cover)
18 sheets max on 24 (text and cover)
All page quantities must be divisible by 4
Tape Bound Items
125 sheets max on 20 no cover
120 sheets max wcover (90 index unless indicated otherwise)
Perfect Bound Items
475 sheets max on 20 no cover
470 sheets max wcover (90 index unless indicated otherwise)
Double Wire Bound Items
40 sheets max on 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
Coil Bound Items
290 sheets max of 20 (if adding cover deduct equivalent number of pages to equal cover thickness) (90 index unless indicated otherwise)
Sides Printed
Head2Head = Most common Double-sided printing with headers on both pages lining up at the top of the page
Simplex = Single-sided printing
Head2Toe = Least common Double-sided printing with header on one page lining up with the footer on the other page
Number of Forms to a Sheet
Number of publication pages printed on a sheet of paper at the printerFor example if a 4-page 85 x 11 publication is printed on the front and back sides of an 11 x 17 sheet of paper that is folded in half the Number of Forms to a Sheet = 4Example 2 If a 4-page 55 x 85 publication is printed on the front and back sides of an 85 x 11 sheet of paper that is folded in half the Number of forms to a Sheet = 4
Number of Sheets Required to Print
Number of sheets of paper required to print the publicationFor example if a 16-page 85 x 11 publication is printed on the front and back sides of four 11 x 17 sheets of paper that are folded in half and saddle stitched together the Number of Sheets Required to Print = 4Example 4 If a 4-page 55 x 85 publication is printed on the front and back sides of one 85 x 11 sheet of paper that is folded in half the Number of Sheets Required to Print = 1
Paper Stock Type
Description
PLAIN Bond
ACNTCVR Accent Cover
BOND3H Bond (3-hole)
BOOKENV Booklet Envelope
C1SGLOSS C1S Gloss Finish
C1SMATTE C1S Matt Finish
C2SGLOSS C2S Gloss Finish
C2SMATTE C2S Matt Finish
CARD Card Stock
CATLGENV Catalog Envelope
CATLGENV6 6 Catalog Envelope
COVERCOLOR Color Cover Copy
CRCKPEEL Crack N Peel Label
CUSTOM Custom
CVRFUTURA Futura Cover
ENV6x9 Standard 6X9 Envelope
ENV9X12 Standard 9X12 Envelope
ETHCERT Ethicon Certificate
GLOSSCOVER Gloss Cover
GLOSSTEXT Gloss Text
HOTSTEXT Hots Text
INDEX Index
LABEL80 80 Up Label
MICROPRT Micro Print
OFFSET Offset
PART2 2 Part
PART3 3 Part
PART4 4 Part
PART5 5 Part
PART6 6 Part
PERF 12 inch Perfed
PERMMAT Perm Mat Ad
PRECUTTAB Pre-Cut Tab
PREPERF Pre-Perforated
RECYL Recycled
SE10ENV 10 Standard Envelope
SE10ITENV 10 Inside Tint Envelope
SE9ENV 9 Stanard Envelope
TAG Tag
TEXT Text
TEXTCOLOR Text Color Copy
TEXTFUTURA Futura Text
TEXTLASER Text Laser Print
TRANSPRNCY Transparencies
VELLUM Vellum
VELLUM3HP Vellum 3HP
WE10ENV 10 Window Envelope
WE9ENV 9 Windor Envelope
WE9ITENV 9 Inside Tint Window Envelope
Paper Stock Color
Black
Blue
Buff
Canary
Cherry
Clear
Cream
Custom
Goldrenrod
Gray
Green
Ivory
Lavender
Manilla
NCRPinkCanary
NCRWhiteBlue
NCRWhiteBlueCanary
NCRWhiteCanary
NCRWhiteCanaryPink
NCRWhiteCanaryPinkGoldenrod
NCRWhiteGreen
NCRWhiteGoldenrodYellow
NCRWhitePink
NCRWhiteWhite
Opaque
Orange
Orchid
Peach
Pink
Purple
Salmon
Tan
Violet
White
Finished Trim Sizes (listed - width x length)
11 x 17
18 x 24 Poster
24 x 36 Poster
3 x 5
36 x 24 Poster
4 x 6
475 x 7
475 x 775
55 x 85
6 x 4
7 x 9
7385 x 9 (RSI Std)
85 x 11
825 x 10875
825 x 11 (RA product profile std)
8375 x 10875
9 x 12
A4
A5
Other - Custom size listed below
Drilling Locations
1CENTER
1LEFTTOP
1TOPCENTER
2LEFT
2LEFT2TOP
2TOP
2TOP2LEFT
2TOP3LEFT
2TOP5LEFT
2TOP5RIGHT
3BOTTOM
3LEFT
3LEFT2TOP
3LEFT3TOP
3RIGHT
3TOP
3TOP5LEFT
5BOTTOM
5CENTER
5LEFT
5RIGHT
5RIGHT2TOP
5TOP
For TRI fold - select Z or C type Description
HALF Half
C C Fold
DBLEPARLL Double Parallel
OFFSETZ Offset Z
SAMPLE See Sample
SHORT Short Fold
V V Fold
Z Z Fold
Number of Pieces per Poly Wrap
Publication length Number per Poly Wrap
77 or more pages 1
33 to 76 pages 25
3 to 32 pages 50
1 or 2 pages 100
Comments
CoverText Stock Spine
100 Gloss Cover If your publication uses a spine make note of that in the comments field Be sure to include the spine as the last page of your PDF Do NOT include that page as part of the publication page count Because the addition of a spine will create an odd page count in the PDF contact a Super User to submit your publication via PDFdirect with an exception tool
100 Gloss Text
100 Text
10pt C1S Cover
10pt C2S Cover
10pt C2S Text
10pt Text Stock
110 White Index
12pt C1S Cover
20 White Opaque Bond
50 Colored Offset
50 White Offset
50 White Opaque
60 Cover Stock
60 White Offset
80 Gloss Cover
80 Gloss Text
8pt C1S White
90 White Index
CoverText Ink
Black
Black + 1 PMS color Type in PMS color
Black + 2 PMS colors Type in PMS colors
4 color
4 color over black
4 color + 1 PMS color Type in PMS color
4 color over black + 1 PMS color Type in PMS color
4 color + 2 PMS colors Type in PMS colors
4 color + aqueous
4 color + varnish

Cable-Free USB Hub - Belkin · Figure 2: Wireless Hub ... • Windows® XP with Service Pack 2 Package Includes • Cable-Free USB Hub • Cable-Free USB Dongle • Power Adapter

Apple Certified Lightning to USB Cable | Apple USB Cable

USB-Serial Conversion Cable - Mouser · PDF fileThank you for purchasing the CS1W-CIF31 USB-Serial Conversion Cable. The CS1W-CIF31 USB- Serial Conversion Cable connects an OMRON PLC

USB TO SERIAL PORT ADAPTER CABLE - Targuscdn.targus.com/web/uk/downloads/ACA37EU_user_guide.pdf · Targus USB to Serial Port Adapter Cable 6 Targus USB to Serial Port Adapter Cable

Cable-Free USB Hub

Instructions - West Marinenewcontent.westmarine.com/documents/pdfs/OwnersManuals/...• RCA splitter • Micro-USB to USB cable (UD models only) • Lightning connector to USB cable

USB cable users: Do not connect the USB cable until this ...h10032. cable users: Do not connect the USB cable until this guide instructs you to or the software may not install properly

Cable Serial USB Micom product

ControlNet Coax Media Planning and Installation Guide · The ControlNet cable system gives you the flexibility to design a communication network for your particular application. To

DS300 - Platform Cable USB - IFIC

Platform Cable USB II - Farnell element14 · † Backwards compatibility with Platform Cable USB, including Pb-Free (RoHS-compliant) † USB Integrators Forum (USB-IF) certified †

USB-Serial Conversion Cable

USB/PPI Programming Cable Driver Procedure Setting Guideline · USB/PPI Programming Cable Driver Procedure ... Setting of Step 7-MicroWin ... USB/PPI cable don’t support “USB”

ControlNet Planning and System Installation...ControlNet High-flex RG-6 Coax Cable Installation Instructions 1786-5.9 ControlNet BNCJI Connector Installation Instructions 1786-5.14

USB smart OTG Charging Cable

ControlNet Coax Media Planning and Installation Guide...ControlNet IP67 Tap and Cable Assembly Kit Installation Instructions, publication 1786-IN017 Installation instructions for a

USB-to-ControlNet Cable...6 USB-to-ControlNet Cable Publication 1784-IN047A-EN-P - November 2008 Configure and Connect the Cable 1. Use the rotary switches to set the module node address

FortiGate 1500D - Fortinet Docs Library · FortiGate 1500D USB A to USB Mini-B Cable USB A cable end into Management Computer USB Mini-B cable end into your Fortinet device. Page

USB CONNECTORS - US · PDF fileusb connectors usb connectors mini usb connector & cable esb3,4,5 series usb connector & cable esb0 series (connector) esb1 series (cable)

EPOS2 USB Driver Installation - Mechatronics...EPOS2 USB Driver Installation 4 Windows XP 4.1 Connect USB Cable 1) Plug in USB cable to EPOS2 Positioning Controller’s USB interface

Ug Usb Blstr II Cable

for Windows 7 - Laplink...• For USB connections: A Laplink USB 2.0 cable or a Laplink USB 1.1 cable plus a USB port on each computer. Note: A Laplink USB 2.0 cable will work in a

The comparison between USB 1.1 cable and USB 2.0 cableww3.microtek.com.tw/tw/uploads/faq/pdf/comparison-usb2.0-cable3.pdf · The comparison between USB 1.1 cable and USB 2.0 cable

USB BitJet Download Cable - Farnell

ControlNet IP67 Tap and Cable Assembly Kitliterature.rockwellautomation.com/idc/groups/literature/documents/... · ControlNet IP67 Tap and Cable Assembly Kit Installation Instructions

On/Cycle vibration modes/...USB charging cable Câble de chargement USB USB-Ladekabel Cable de carga USB Fio de recarga USB Cavo di caricamento USB USB-oplaadsnoer Laddningskabel med

USB 2.0 Video Capture Cable

ControlNet IP67 Tap and Cable Assembly Kit · 2 ControlNet IP67 Tap and Cable Assembly Kit Installation Instructions Publication 1786-IN017B-EN-P - May 2004 The modular design of

USB and DSD Setup Guide€¦ · 1. Please connect the power cable before plugging USB cable to your PC. 2. Please unplug and reconnect the power cable or USB cable when the PC does

NI USB-5132/5133 Getting Started Guide - National Instruments · 2018. 10. 18. · USB Cable Strain Relief Groove (Large) 4. USB Cable Strain Relief Groove (Small) 5. USB Cable 6

USB Type-C Cable and Connector Specification · USB Type-C Cable and Connector Specification ... a

Find the Click HERE - Artisan Technology Group · configured on a pernode basis in the ControlNet I/O map table frame single data transfer on a ControlNet link drop cable cable that

USB Cable 3D Tutorial

USB – RS232 Cable Converter

2711-6.10ES, Comunicaciones ControlNet Terminales ... · Manual de Instalación y planificación del sistema de cable ControlNet (Publicación 1786-6.2.1) para descripciones de estos