u.s. catalog – active equipment - wireless system...

Leading provider of RF coverage solutions

U.S. Catalog – Active Equipment Axell Wireless is a leading developer and supplier of high-quality RF coverage solutions designed

to maximize wireless network coverage in difficult RF environments and complex settings. The

company specializes in extending RF radio coverage to rural areas, office buildings, subways,

tunnels and shadowed areas. The Axell Wireless coverage solution supports all major mobile

technologies and standards for Cellular, PCS, 700 LTE, AWS, VHF, UHF, LMR, ESMR and TETRA

For more information, visit www.axellwireless.com

of 56 www.axellwireless.com Issue 8 – April 2011

OUR SOLUTIONS MODEL

endless… seamless… wireless…

for all types of environments

for a wide range of technologies

for all major coverage applications

Issue 8 – April 2011 www.axellwireless.com of 56

The active equipment is divided into three main sub-categories:

Public Safety Off-Air (FM/AM, VHF, UHF, 700, 800)

Commercial Off-Air (700 LTE, 850 Cellular, 1700 AWS, 1900 PCS)

Fiber Fed (Public Safety and Commercial)

Contents

About Axell Wireless Page 4

Bi-Directional Amplifiers for Public Safety Page 5

CSR238 - VHF Digital Channel Selective Repeater Page 8

CSR438A - UHF Digital Channel Selective Repeater Page 10

BSR421 - Compact UHF Band Selective Repeater Page 12

BSR438 - Digital Band Selective Repeater Page 14

CSFT438 - Digital Frequency Shifting Repeater Page 16

Axell 3178B - 700/800 MHz RF Mid-Power Bi-directional Amplifier Page 18

Axell 4078D - 700/800 MHz Digital Multi-Channel RF Signal Booster Page 20

Axell 2108S - 800 MHz RF Mini Repeater Page 22

Axell 2408S - 800 MHz LMR RF Mini Signal Booster Page 24

Axell 3108S - 800 MHz RF Mid-Power Repeater Page 26

Axell 4008D - 800 MHz Digital Multi -Channel RF Signal Booster Page 28

Axell D-SBR 700 - Digital Channel Selective Repeater for LTE - 700MHz Page 30

Axell 2408 - 800 MHz Cellular Band Selective RF Mini Repeater Page 32

Axell 819 - 800MHz and 1900MHz Dual-Band RF Repeater Page 34

Axell 2117 - AWS Channel Selective RF Mini Repeater Page 36

Axell 2119 - 1900MHz Band Selective RF Mini Repeater Page 38

DIGI-mini - Americas Digital Multi-Band Mini Repeater Page 40

D-MBR - Digital Multi-Band Repeater Page 44

OMU - Optical Master Unit Page 44

BSF424 - UHF Fiber Fed Repeater Page 46

SMR 700/SMR 800 - Fiber-Fed Radio Head - High Power for Public Safety Page 48

850/1900/AWS/LTE700 - Fiber-Fed Radio Head - High Power Page 50

RMC and AEM - Network Management and Control Page 52

Some recent projects undertaken in the United States Page 54

Contact Details Page 55


About Axell Wireless Axell Wireless is a leading worldwide developer and manufacturer of wireless coverage equipment and associated solutions. Today, the company is one of the top 3 global providers of wireless coverage solutions and the market leader in the provision of solutions for the public safety market. Applications for Axell Wireless equipment include coverage solutions for road and railway tunnels, in buildings and infrastructures, remote or rural environments, airports and transportation systems. With its headquarters in the UK, Axell Wireless has been operating for over 30 years and now has a substantial international presence operating out of 10 offices across 4 continents. A proven track record combined with a worldwide reputation for providing innovative and high quality products have made Axell Wireless a truly global player in the wireless coverage industry. AXELL WIRELESS LMR AND MISSION CRITICAL SOLUTIONS

Axell Wireless offers a comprehensive portfolio of enhanced coverage solutions for the LMR and public safety markets. Based on RF-SAW filtering, patented DSP filtering™, Axell Wireless’ proven, indoor and outdoor solutions solve a wide range of network issues including interference and oscillation problems, challenging coverage holes, rapid response deployment and inadequate in-building coverage. Regardless of the technology or frequency, Axell Wireless can provide customized coverage solutions that address any combination of unique and complex network needs for the LMR and public safety user.

AXELL WIRELESS CARRIER SOLUTIONS

Axell Wireless offers a comprehensive portfolio of enhanced coverage solutions for the wireless carrier market. Based on IF-SAW filtering, patented DSP filtering™ and SmartALC™ technologies, Axell Wireless’ proven, indoor and outdoor solutions solve a wide range of network issues including interference and oscillation problems, challenging coverage holes, inadequate in-building coverage and cell extension from the smallest structures to the largest venues . Regardless of the technology or frequency, Axell Wireless can provide customized coverage solutions that address any combination of unique and complex network needs for the wireless carrier.


FIRST RESPONDERS have to be sure

Flexible On-Frequency Bi-Directional Amplifiers

Frequency Range 60MHz to 3GHz

Band Selective or Channel Selective

Software Defined Radio DSP

Flexible Modular Design

1 to 100 Watt Class “A” Amplifiers

Simplex or Duplex Design

30dB to 110dB Gain

IP65 Enclosures

RF Design Services

On-Site Commissioning Axell Wireless are acknowledged leaders in the design and supply of cost effective wireless coverage solutions world-wide, extending single or multiple radio networks throughout buildings, tunnels etc. for analogue and digital essential services. The Axell Wireless range of equipment includes Band and Channel Selective BDAs, Filtering and Multicoupling systems utilizing state-of-the-art RF Digital Signal Processing techniques to enhance radio coverage and to enable more efficient use of radio spectrum allocations, helping to overcome the physical limitations of antenna base-station sites.

All key Public Safety bands from VHF to 900MHz and P25 are covered.

DELIVERING WORLD CLASS COMMUNICATIONS SOLUTIONS FOR OVER 30 YEARS

Call 972 361 8038 or email [email protected]

mailto:[email protected]


LNA PALNA AGC

LNAPA LNAAGC

To Antenna facing BTS

To Antenna facing Mobiles

DOWNLINK

UPLINK

PSU ALARMS

CUSTOMIZABLE SOLUTIONS FOR PUBLIC SAFETY

BDA – Bi-Directional Amplifiers Two-Way On-Frequency Repeaters

Multi-band and frequency agile

Many carriers at low power

Automatic gain control is fitted to protect the system against operational saturation caused by close mobile working

Available in 19” rack-mount configuration or IP65 wall-mount enclosure.

Axell Wireless Custom Built BDAs are two-way on-frequency

repeaters which are available to meet the requirements of all public

safety bands from VHF to 800MHz and are P25 compliant. They are broadband and can handle large

numbers of channels and can also be configured to operate in frequency bands between 30MHz and

2.4GHz.

Each BDA is configured for the customer’s specific requirements at the frequencies of interest. Dual or triple

pass band versions are available where spectrum allocations are not continuous. The necessary filtering to

cover the system bandwidths required is assembled from a wide range of filtering designs encompassing

not only traditional analog methods but also the latest Digital Signal Processing (DSP) and Software Defined

Radio (SDR) technologies which are being actively develop by Axell Wireless. The use of DSP and SDR

technologies helps to deliver better performance and also offers a built-in upgrade path to future-proof

capital investment.

Public Safety Off-Air


Technical Expertise

A major factor in the success of Axell Wireless is our reputation for excellence and expertise in the radio

communications industry. Our skills and flexibility have enabled us to repeatedly provide innovative

solutions quickly and cost-effectively with assured quality.

Over the years, we have forged very strong links with:

The Federal Communications Committee (FCC).

The UK Institution of Engineering and Technology (IET).

The European Telecommunications Standards Institute (ETSI).

The Tetra Memorandum of Understanding (MOU).

Today our product range includes Channel Selective, Band Selective and Optical BDAs, as well as passive

components to satisfy the complex needs of the public safety telecommunications networks in a cost

effective and fault tolerant manner.

Axell’s public safety coverage solutions dramatically simplify installations and significantly reduce a site’s

footprint and power consumption. Using Axell’s bespoke network management software tool (AEM) or a

web interface, new features and capabilities can be downloaded instantaneously thus providing flexibility

and lower costs for deployment and maintenance.

Typical custom-build

Channelized BDA


MISSION CRITICAL SOLUTIONS

CSR238 VHF DIGITAL CHANNEL SELECTIVE REPEATER

Large repeater coverage footprint due to high output power and gain

Easy system implementation with built-in commissioning tools

Time-slot based ALC

Supervision available over radio modems

Remotely upgradeable for future challenges

The CSR238 provides quick, cost-effective and secure radio coverage in any VHF network and can handle

up to eight carriers. Through the use of the CSR238 an operator can easily expand a base station’s service

area by filling in coverage holes caused by terrain, buildings or tunnels.

The wireless interface permits the operator to remotely configure RF parameters as well as monitor alarms

on a continuous basis.

The CSR238 can also be used to provide coverage in shorter tunnels. Longer tunnels can be covered by

connecting the repeater to an OMU (Optical Master Unit) that feeds a number of fiber fed repeaters.



CSR238 Specifications

ELECTRICAL SPECIFICATIONS DOWNLINK UPLINK Standard frequency ranges available 148 - 174MHz 148 - 174MHz

Number of channels up to 8 Filter pass bandwidth 1-2MHz typical with options to 5MHz Duplex frequency spacing 5MHz typical with options down to 1MHz Impedance 50 Ω Noise figure 4.5 dB typical at maximum gain

Group delay <32 μs (APCO 25 compliant)

Alternative filter options programmed for Narrow banding or IF band select. ALC (1) Time-slot based Channel bandwidth 15kHz to 110kHz (options for wider bandwidths) Selectivity Dependant on filter selected Downlink output power/carrier +30 dBm (2 carriers), +27 dBm (4 carriers), +24 dBm (8 carriers) Uplink output power/carrier +27 dBm (2 carriers), +24 dBm (4 carriers), +21 dBm (8 carriers) Gain 65 to 95 dB in 1 dB steps Third order intercept +54 dBm, typical Spurious Emissions from RF port < -13 dBm FCC Compliant Remote control and alarm supervision Via modem GSM, P25, PSTN, via Ethernet and SNMP Power Requirements 110VAC 60Hz or 230VAC 50Hz or -48 VDC Power Consumption 220 W, typical EXTERNAL CONNECTION RF ports 7/16 DIN Female External alarm inputs 4 Alarm relay output Dry contact MECHANICAL SPECIFICATION

Dimensions (h x w x d) 21.25” x 13.75” x 12.0” (540mm x 350mm x 305mm)

(options for complex frequency bands) Enclosure Aluminum IP65 (NEMA 4) Weight 55lbs typical (25kg) Cooling Convection Mounting Wall mounted ENVIRONMENTAL SPECIFICATION Operating Temperature -13°F to 131°F (-25°C to 55°C) Storage -22°F to 158°F (-30°C to 70°C) Humidity ETSI EN 300 019-2-4 (see compliance below)

Complies with R&TTE Directive including, EN 301 489-18

ETSI TS 101 789-1, EN 60 950 (1) The squelch is set to -108 dBm, which ensures correct operation for most repeater system scenarios. It will open approximately 3dB below the static sensitivity in the repeater cell thus it will be open to any mobile on the cell border. (Specification CSR238_rev C) SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE .


MISSION CRITICAL SOLUTIONS

CSR438A UHF DIGITAL CHANNEL SELECTIVE REPEATER



Time-slot based ALC

Supervision available over Radio Modems

Remotely upgradeable for future challenges

Very low propagation delay leading to higher security, resilience and availability of information

The CSR438A provides quick, cost-effective and secure radio coverage in any UHF network and can handle

up to eight carriers. Through the use of the CSR438A an operator can easily expand a base station’s

service area by filling in coverage holes caused by terrain, buildings or tunnels.

The wireless interface permits the operator to remotely configure RF parameters as well as monitor alarms

on a continuous basis.

The CSR438A can also be used to provide coverage in shorter tunnels. Longer tunnels can be covered by




CSR438A Specifications

ELECTRICAL SPECIFICATIONS DOWNLINK UPLINK Standard frequency ranges available 380 - 512MHz 380 - 512MHz Number of channels up to 8

Filter pass bandwidth 5MHz typical 380 - 430MHz 2MHz typical 450 - 470MHz 1MHz typical 470 - 512MHz

Duplex frequency spacing

10MHz typical 380 - 400MHz 9 or 10MHz typical 400 - 430MHz

5MHz typical 450 - 470MHz 3MHz typical 470 - 512MHz

Impedance 50 Ω Noise figure 4.5 dB typical at maximum gain

Group delay <32 μs (APCO 25 compliant)

Alternative filter options programmed for Narrow banding or IF band select. ALC (1) Time-slot based Channel bandwidth 15kHz to 110kHz (options for wider bandwidths) Selectivity Dependant on filter selected

Output power/carrier +38 dBm (2 carriers), +35 dBm (4 carriers), +32 dBm (8 carriers) +33 dBm (2 carriers), +30 dBm (4 carriers), +27 dBm (8 carriers)

Gain 55 to 85 dB in 1 dB steps Third order intercept +68 dBm, typical Spurious Emissions from RF port < -13 dBm FCC Compliant Remote control and alarm supervision Via modem GSM, P25, PSTN, via Ethernet and SNMP Power Requirements 110VAC 60Hz or 230VAC 50Hz or -48 VDC Power Consumption 180 W, typical EXTERNAL CONNECTION RF ports 7/16 DIN Female External alarm inputs 4 Alarm relay output Dry contact MECHANICAL SPECIFICATION

Dimensions (h x w x d) 21.25” x 13.75” x 12.0” (540mm x 350mm x 305mm)

(options for complex frequency bands) Enclosure Aluminum IP65 (NEMA 4) Weight 50 lbs Typical (22.6 kg) Cooling Convection Mounting Wall mounted ENVIRONMENTAL SPECIFICATION Operating Temperature -13°F to 131°F (-25°C to 55°C) Storage -22°F to 158°F (-30°C to 70°C) Humidity ETSI EN 300 019-2-4 (see compliance below)


ETSI TS 101 789-1, EN 60 950

(1) The squelch is set to -108 dBm, which ensures correct operation for most repeater system scenarios. It will open approximately 3dB below the static sensitivity in the repeater cell thus it will be open to any mobile on the cell border. (Specification CSR438A_rev D) SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE


MILITARY CRITICAL COVERAGE SOLUTIONS

BSR421 COMPACT UHF BAND SELECTIVE REPEATER

Easy deployment

Up to 70dB gain

High output power

The BSR421 offers quick and easy coverage deployment for

indoor applications such as police stations, garages, power plants or

confined areas.

An outside donor antenna picks up the signal, whilst the indoor server antenna provides the coverage inside

the building.

The unit provides relatively high output power and amplifies the signals with a gain of up to 70dB.

Installation is further made easy through the use of a wall adapter.



BSR421 Specification

ELECTRICAL SPECIFICATIONS DOWNLINK UPLINK 390-395MHz 380-385MHz 395-400MHz 385-390MHz 420-425MHz 410-415MHz 425-430MHz 415-420MHz 460-465MHz 450-455MHz

Frequency bands available

465-470MHz 455-460MHz

Operator bandwidth 5MHz Duplex distance 10MHz Impedance 50 Ω

1 carrier: +18 dBm 2 carriers: +15 dBm 3-4 carriers: +12 dBm

Output power/carrier (DL)

8 carriers: +9 dBm Gain 50-70 dB in 1 dB steps EXTERNAL CONNECTION Local Maintenance terminal RS232 RF Ports N-Type Female External alarms 4 external alarm inputs (Relays N/C or N/O configurable) Repeater status relay 1 Relay normally open Remote connection and alarm supervision via GSM, GSM-R or PSTN modem or Ethernet Power consumption < 20 W MECHANICAL SPECIFICATION Dimensions (H x W x D) 11” x 8.8” x 3.2” (280 x 224 x 83 mm) Enclosure Aluminum (IP52) Weight 8.8 lbs (4 kg) Cooling convection ENVIRONMENTAL SPECIFICATION Operating Temperature 32°F to 113°F (0°C to + 45 °C) Storage -22°F to +158°F (-30°C to +70°C) MTBF > 100 000 hours complies with TS 101 789-1 73/23/EEG

(Specification BSR421_rev H) SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE


TETRA MISSION CRITICAL SOLUTIONS

BSR438 DIGITAL BAND SELECTIVE REPEATER

Very low propagation delay leading to higher security, resilience and availability of information


Supervision available over TETRA modems

Remotely upgradeable for TEDS


The BSR438 provides quick, cost-effective and secure radio coverage in any TETRA and TETRAPOL

network. Through the use of the BSR438 an operator can easily expand a base station’s service area by

filling in coverage holes caused by terrain, buildings or tunnels.

The wireless interface permits the operator to remotely configure RF

parameters as well as monitor alarms on a continuous basis.

The BSR438 can also be used to provide coverage in shorter tunnels. Longer tunnels can be covered by




BSR438 Specifications

ELECTRICAL SPECIFICATIONS DOWNLINK UPLINK

Standard frequency ranges available

390-395 MHz 395-400 MHz 420-425 MHz 425-430 MHz 460-465 MHz 465-470 MHz


Filter options Bandwidths up to 5MHz Impedance 50 Ω noise figure 4.5 dB at maximum gain Group delay <12 μs (14 μs high selectivity), <2 μs @ 5MHz filter Selectivity According to ETSI TS 101-789-1 Output power/carrier +36 dBm (1 carrier) +33 dBm (2 carriers) +30 dBm (4 carriers) Gain 55 to 85 dB in 1 dB steps Third Order Intercept +68 dBm, typical Spurious Emissions from RF port < -36 dBm Intermediation Products -60 dBc (according to TS 101-789-1) Remote control and alarm supervision Via modem GSM, GSM-R, TETRA, PSTN, via Ethernet and GPRS Power Requirements 230VAC 50Hz or 110VAC 60Hz or -48 VDC Power Consumption 180 W, typical EXTERNAL CONNECTION RF ports 7/16 DIN Female External alarm inputs 4 Alarm relay output Dry contact MECHANICAL SPECIFICATION Dimensions (h x w x d) 21.2” x 13.7” x 5/9” (540 x 350 x 150 mm) Enclosure Aluminum (IP65) (NEMA 4) Weight 48.5 lbs (22 kg) Cooling Convection Mounting Wall mounted ENVIRONMENTAL SPECIFICATION Operating Temperature -13°F to 131°F (-25˚C to + 55˚C) Storage -22°F to 158°F (-30˚C to + 70˚C) Humidity ETSI EN 300 019-2-4 (see compliance below)

Complies with R&TTE Directive including,

EN 301 489-18 ETSI TS 101 789-1, EN 60 950 (Specification BSR438_rev A) SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE


TETRA MISSION CRITICAL SOLUTIONS

CSFT438 DIGITAL FREQUENCY SHIFTING REPEATER

Large outdoor coverage footprint due to high gain and output power

Extensive remote control and supervision capabilities

Software Defined Radio technology gives low delay and high selectivity

Time slot based Automatic Level Control eliminates near- far effects

Frequency Shifting technology allows very high gain with low antenna isolation

The frequency shifting TETRA repeater can provide a much large coverage compared to a conventional

repeater. This is due to the reduced antenna isolation requirements, which allow higher gain and

consequently higher output power from the repeater.

The CSFT438 is primarily intended for rural area applications, where the terrain conditions normally would

require a large number of base station sites for seamless coverage. The frequency shifting concept is based

on a donor unit CSFT438D, placed near the base station, which connects to the remote unit CSR438R over

the air using free channels within the operational frequency band.

The CSFT438 can distribute 2 or 4 channels from the selected donor base station. The donor unit

CSFT438D can be physically connected to the base station transmit and receive ports through directional

couplers. Both the donor and the remote unit can be remotely controlled and supervised via a built-in

wireless modem.



CSFT438 Specifications

ELECTRiCAL SPECIFICATIONS DOWNLINK UPLINK

Standard frequency ranges available


380-385MHz 385-390 MHz 410-415 MHz 415-420 MHz 450-455 MHz 455-460 MHz

Number of channels 1, 2 or 4 Channel frequency Any TETRA channel within the ordered frequency range impedance 50 Ω Noise figure 4.5 dB at maximum gain Group delay <12 μs (14 μs high selectivity) ALC (1) Time-slot based Selectivity According to ETSI TS 101-789-1 Output power/carrier +36 dBm (1 carrier) +33 dBm (2 carriers) +30 dBm (4 carriers) Gain 65 to 95 dB (Remote unit), 20 to 50 dB (Donor unit) in 1 dB steps Third order intercept +68 dBm, typical Spurious Emissions from RF port < -36 dBm intermodulation products -60 dBc (according to TS 101-789-1) Remote control and alarm supervision Via modem GSM, GSM-R, TETRA, PSTN, via Ethernet and GPRS Power Requirements 230VAC 50Hz or 110VAC 60Hz or -48 VDC Power Consumption 180 W, typical (Remote unit), 140 W, typical (Donor unit) EXTERNAL CONNECTION RF ports 7/16 DIN Female, N Female for BTS port on Donor unit External alarm inputs 4 Alarm relay output Dry contact MECHANICAL SPECIFICATION Dimensions (h x w x d) 21.2” x 13.7” x 5/9” (540 x 350 x 150 mm) Enclosure Aluminum IP65 (NEMA 4) Weight 48.5 lbs (22 kg) Cooling Convection Mounting Wall mounted ENVIRONMENTAL SPECIFICATION Operating Temperature -13°F to 131°F (-25˚C to + 55˚C) Storage -22°F to 158°F (-30˚C to + 70˚C) Humidity ETSI EN 300 019-2-4 (see compliance below)


ETSI TS 101 789-1, EN 60 950 (1) The squelch is set to -108 dBm, which ensures correct operation for most repeater system scenarios. It will open approximately 3dB below the static sensitivity in the repeater cell thus it will be open to any mobile on the cell border. (Specification CSFT438_rev E) SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE


LMR AND MISSION CRITICAL SOLUTIONS

Axell 3178B 700/800 MHz RF MID-POWER BI-DIRECTIONAL AMPLIFIER

Band selective, mid-power BDA for public safety, In-building and outdoor networks

Dual-band 700/800 MHz in a single unit

Composite power +31dBm

RF SAW filtering

Small footprint and lightweight for easy maintenance

The Axell 3178B is a dual-band 700/800 MHz band selective mid-power bi-directional amplifier in a single

compact unit.

Specially designed for public safety in-door and outdoor networks, the Axell 3178B small footprint and

flexible installation options minimize interference with operations on the floor on which it is installed.

The uplink and downlink path gains can be manually adjusted over a 30dB range. Each path has an AGC

circuit which limits the output power to prevent unwanted signal distortion. A LED indicates when the AGC

limit has been reached.

It can be installed in a rack, mounted on a wall or on the ceiling. Its relatively low weight which allows

mounting and maintenance by a single person, in addition to the simple commissioning procedure that does

not require a high level technician, provides significant savings on labor costs.

The Axell 3178B supports remote monitoring. This is implemented by connecting an external dialer

(purchased separately) to dry contact alarms located on the unit external panel. The efficient thermal design

of the Axell 3178B, careful component selection and robust design provides a reliable, cost-effective system

for public-safety in-building or outdoor coverage.



The Axell 3178B mid-power bi-directional amplifier is powerful enough to drive a passive Distributed Antenna system (DAS) for coverage in areas over 100,000ft2 (9,290m2) in buildings, parking lots, malls, warehouses and offices.

Axell 3178B Specifications

ELECTRICAL DOWNLINK UPLINK Frequency Range Option 1

769 - 774 MHz 851 - 869 MHz

797 - 824 MHz

Frequency Range Option 2 763 - 774 MHz 851 - 854 MHz

797 - 809 MHz

Frequency Range Option 3 769 - 774 MHz 851 - 861 MHz

797 - 816 MHz

Passband Gain 80 dB 80 dB Passband Ripple ± 1.5 dB ± 1.5 dB Manual Gain Attenuation Range (in 2 dB steps) 0 - 30 dB 0 - 30 dB Composite Output Power + 31 dBm + 24 dBm Output IP3 (typical) + 50 dBm + 43 dBm Noise Figure @ Maximum Gain (typical) 5 dB 5 dB Propagation Delay < 5 μsec < 5 μsec GENERAL Power Supply 110 - 220 VAC

Power Consumption 105 W

Total RF Input Power (no damage) + 10 dBm

Impedance Level 50 Ohms

RF Connector N-type, Female

VSWR 1.5:1 Max

Compliance FCC/IC

ENVIRONMENTAL Operating Temperature 14°F to 122°F (- 10°C to + 50°C) Storage Temperature - 40°F to 176°F (- 40°C to + 80°C) Dimensions L x W x H 15.76” x 15.76” x 8.66” (400 x 400 x 220 mm) approx. Weight 30.8 lbs (14 kg) approx. Enclosure IP65, (NEMA 4)

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE (Specification 3178B_rev E)

ORDERING INFORMATION IDENTIFICATION DESCRIPTION PART NUMBER Axell 3178B 700-800 MHz public safety band selective bi-directional amplifier 18MHz on 800 band MW-CBDA-SMR700-800-16W80-18 BSR 700/800 PS BSR 3178 SMR 700/800 31dBm 9MHz filter BSR 2708-2808-PS-9 BSR 700/800 PS BSR 3178 SMR 700/800 31dBm 3MHz filter BSR 2708-2808-PS-3 BSR 700/800 PS BSR 3178 SMR 700/800 31dBm 10MHz filter BSR 2708-2808-PS-10



Axell 4078D 700/800 MHz DIGITAL MULTI-CHANNEL RF SIGNAL BOOSTER

High-power, signal booster that supports APCO 25 for public safety networks

Automatic gain control (AGC) per channel

Web based, local and remote monitoring and control

Patented DSP filtering™ technology

Supports up to 24 independent filters with user programmable bandwidth / frequency

User-selectable adjacent channel rejection and time delay to minimize interference

Channel selectivity and adjacent channel rejection exceeds FCC requirements

IP65 enclosure

Axell 4078D is a high-power digital multichannel signal booster (DCSB) that features an array of up to 24

DSP based, software-controlled, variable bandwidth filters, user-programmable across the 700 and 800

MHz bands.

Axell 4078D supports all public safety technologies. In addition to specifying the center frequency of each

filter, the user can select a filter from a drop down list that has several choices for each passband that vary

in time delay and filter slope; this gives the engineer the unique ability to trade off the adjacent channel

rejection and time delay interference for the coverage area permitting the use of the Axell 4078D in

applications where no other booster solution will work.

Every parameter of Axell 4078D including filter tuning and selection is software controlled either locally or

remotely via a wireless modem. The control software is the Axell Wireless’ intuitive and user friendly Remote

Management Tool, which is provided with every unit.

The patented Axell Wireless’ digital RF filter not only enables simple initial setup for any channel plan, but if

necessary even permits a simple reconfiguration because of rebanding.

The booster protects against degradation of the system’s sensitivity and coverage thanks to the inbuilt AGC

per-channel feature, which permits equalization of the channel levels for uniform coverage and will

selectively squelch nearby, high power mobiles.

With the new IP65 box, the Axell 4078D can easily be used in both indoor and outdoor applications.



The Axell 4078D digital, multi-channel signal booster provides reliable and interference free coverage when in the presence of other services in the adjacent channels.

Axell 4078D Specifications

ELECTRICAL DOWNLINK UPLINK Frequency Range 763-775MHz & 851-869 MHz 793-805MHz & 806-824MHz Passband Gain 65 to 95 dB Adjustable in 1 dB steps Passband Ripple ± 2.5 dB maximum ± 2.5 dB maximum AGC Dynamic Range 60 dB Filter Bandwidth 12.5 KHz to 4.5 MHz (programmable) Composite Output Power + 40 dBm + 27 dBm Composite Output Power per Band + 37 dBm + 27 dBm Channel Setting Resolution 0.5 kHz Noise Figure @ Maximum Gain 5.0 dB Delay 5-120 μsec depending on filter bandwidth and required adjacent channel rejection GENERAL Dimensions W x D x H 21.2” x 13.7” x 8.7” (540 x 350 x 220 mm) Power Supply 90 to260 VAC (DC Supply optional) Power Consumption <350 W Total RF Input Power (no damage) +10 dBm Impedance Level 50 Ohm RF Connector N-type, Female VSWR 1.5:1 maximum ENVIRONMENTAL Operating Temperature -5°F to 122°F (-10°C to 50°C) Humidity 10% to 90% Condensed Weight 73 lbs. (33kg) Enclosure Aluminum IP65 (NEMA 4)

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE (Specification 4078D_rev B)

ORDERING INFORMATION IDENTIFICATION DESCRIPTION PART NUMBER

Axell 4078D Digital Multi Channel Selective Signal Booster 700/800 24 channels, 40dBm composite, 95 dB gain, AC powering.

MW-DCSB-40D95-700/800-24-AC


WIRELESS CARRIER SOLUTIONS

Axell 2108S 800 MHz RF MINI REPEATER

Band-selective mini repeater for public safety and iDEN® networks

IF SAW filtering – tunable, sharp out-of-band signal rejection

Intuitive Web management GUI - local or remote (via external modem) connection

Axell Wireless Operating and Management Center (OMC) support

SmartALC™ technology

Prevents oscillations and balances coverage

Automatically sets optimum gain

Ensures transparent network operation

The Axell 2108S is an 800MHz band selective mini repeater, specially designed for public safety and iDEN®

applications.

The Axell 2108S has switchable and tunable IF-SAW filters for very high out-of-band rejection as well as a

simple way to reselect and retune the pass band.

Axell 2108S incorporates software-controlled interference rejection, which allows the user to move away

from interference created from nearby cellular networks. Axell 2108S includes Axell Wireless’ proprietary

SmartALC power control algorithm.

SmartALC is more than simple gain control; it automatically optimizes the gain setting by learning the actual

range of RSSI levels over a user-specified period of time.

SmartALC prevents oscillations, reduces the amount of isolation required by the system and optimizes the

system to minimize noise rise at the donor cell site. SmartALC allows the installer to quickly set up the unit,

yet still achieve the design goals specified by the system engineer. Axell 2108S features three tri-color front

panel LEDs that provide ongoing status and alarm indication. In addition, the Downlink status LED can be

used during setup as an RSSI level indicator to help align the donor antenna for optimal performance.

Axell 2108S supports Intuitive Web management GUI that can be accessed using any standard browser (no

client installation required) through a local or remote (via external modem) connection.

In addition, Axell 2108S can be remotely monitored and controlled through the Axell Wireless OMC solution

(via external modem).



The Axell 2108S mini repeater is cost-effective for simple spot coverage and also powerful enough to drive a passive Distributed Antenna System (DAS) for coverage well over 50,000ft2 (4,645m2)

Axell 2108S Specifications

ELECTRICAL DOWNLINK UPLINK Frequency Range 851 - 869 MHz 806 - 824 MHz

18 / 7 MHz 18 / 7 MHz 4.5 / 3.5 MHz 4.5 / 3.5 MHz

18 / 3MHz 18 / 3MHz Selectable SAW Filters

18 / 10MHz 18 / 10MHz Frequency Separation (in-band) 45 MHz 45 MHz Passband Gain 70dB 70dB Passband Ripple ± 2.5 dB ± 2.5 dB Gain Attenuation Range 0 dB to 31 dB (in 1 dB steps) 0 dB to 31 dB (in 1 dB steps) Composite Output Power + 21 dBm + 21 dBm Noise Figure @ Maximum Gain (typical) 5 dB 5 dB Propagation Delay < 9.5 μsec < 9.5 μsec GENERAL Power Supply 10-240 VAC, 70W Total RF Input Power (no damage) + 10 dBm Impedance Level 50 Ohm RF Connector N-type, Female VSWR 1.7:1 Compliance FCC/IC ENVIRONMENTAL Operating Temperature 14°F to 122°F (-10°C to 50°C) Storage Temperature -22°F to 176°F (-30°C to 80°C) Dimensions W x H x D 12.6” x 10.6” x 4.7” (320 x 270 x 120 mm) Weight 15.4 lb (7 kg) Weatherproof IP51

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE (Specification 2108S_rev F)

ORDERING INFORMATION IDENTIFICATION DESCRIPTION PART NUMBER Axell 2108S iDEN Mini Repeater Unit (70dB/21dBm) 7 / 18 MHz filters MW-CCSR-SMR8-2170-18-7 Axell 2108S iDEN Mini Repeater Unit (70dB/21dBm) 3.5 / 4.5 MHz filters MW-CCSR-SMR8-2170-4.5-3.5 BSR 2108 PS 2108S SMR 800 mini 21dBm 18/10MHz BSR 2108-PS -18-10 BSR 2108 PS 2108S SMR 800 mini 21dBm 18/3MHz BSR 2108-PS -18-3

The 3, 7,10 MHz filters can be moved across the whole 18MHz band.



Axell 2408S 800 MHz LMR RF MINI SIGNAL BOOSTER

Band selective for mini booster for SMR, ESMR and public safety networks

IF-SAW filtering – high out-of-band rejection

Indoor coverage up to 50,000 square feet

Features Axell Wireless’ SmartALC™ technology

Switchable bandwidth option

User-selectable and tunable across the 800 MHz band

Accommodates all rebanding phases without changing hardware

The Axell 2408S is available with a single frequency block or two non-contiguous blocks. For single block

applications, the switchable bandwidth feature is available. With this feature, the unit is configured with three

possible frequency blocks that the operator can specify. One of the three blocks is selected by the user and

tuned to the desired frequency during set up. This permits the user to select the optimum passband for each

of the rebanding phases without the need to change any hardware.

The standard configurations accommodate most of the passband requirements for public safety, ESMR and

SMR networks including the Southeast region.

The Axell 2408S includes Axell Wireless’ proprietary SmartALC power control algorithm. SmartALC

prevents oscillations, reduces the amount of isolation required by the system and optimizes the system to

minimize noise rise at the donor site. SmartALC allows the installer to quickly set up the unit, yet still

achieve the design goals specified by the system engineer.

The Axell 2408S features three tri-color front panel LEDs that provide ongoing status and alarm indication.

In addition, the Downlink status LED can be used during setup as a received signal strength level indicator

to help align the donor antenna for optimal performance. The efficient thermal characteristics of the Axell

2408S, careful component selection and robust design result in high system reliability.



The Axell 2408S mini signal booster is cost effective for simple spot coverage and also powerful enough to drive a passive Distributed Antenna System (DAS) for coverage well over 50,000ft2 (4,645m2)


ELECTRICAL DOWNLINK UPLINK

Frequency Range (1) 851 – 869 MHz 806 – 824 MHz

Passband Gain 80 dB 80 dB

Passband Ripple ± 1.5 dB ± 1.5 dB

Gain Attenuation Range 0 to 31 dB (in 1 dB steps) 0 to 31 dB (in 1 dB steps)

Composite Output Power (per carrier) + 24 dBm + 24 dBm

Noise Figure @ Maximum Gain (typical) 5.0 dB 5.0 dB

Propagation Delay <5 μsec <5 μsec (1) 3 selectable and tunable sub-bands are standard GENERAL Power Supply 110/220 VAC

Power Consumption 35 W

Total RF Input Power (no damage) +10 dBm

RF Connector N-type, Female

VSWR 1.7:1

Compliance FCC/IC

ENVIRONMENTAL

Operating Temperature -4 to 122° F (-20 to 50° C) Storage Temperature -22°F to 176°F (-30°C to 80°C) Humidity 10% - 90% Condensed Dimensions L x W x H 12.2” x 10.6” x 2.8” (310 x 270 x 70 mm) Weight 13.2 lb (6 kg) Enclosure IP51

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE (Specification 2408S_rev F)


Axell 2408S 800 MHz rebandable mini booster: 18, 11 and 3 MHz selectable sub-bands

MW-CCSR-ESMR-1W80-18-11-3

Axell 2408S 800 MHz rebandable mini booster: 15, 7 and 5 MHz sub-bands

MW-CCSR-ESMR-1W80-15-7-5

BSR 2408 PS 2408 SMR 800 mini 24dBm 18/10/3 MHz BSR 2408-PS-18-10-3 The 3, 5, 7, 10, 11 MHz filters can be moved across the whole 18MHz band.



Axell 3108S 800 MHz RF MID-POWER REPEATER

Band selective, mid-power repeater for 800 MHz, public safety and iDEN® networks

Supports 800 MHz rebanding

No need to replace hardware

Can be retuned locally or remotely

IF SAW filtering – tunable, sharp out-of-band signal rejection





The Axell 3108S is a 800MHz band selective mid-power repeater, specially designed for public safety and iDEN® applications. Axell 3108S has switchable and tunable IF SAW filters for very high out-of-band rejection as well as a simple way to reselect and retune the pass band to accommodate all rebanding phases. Axell 3108S incorporates software controlled interference rejection, which allows the user to move away from interference created from nearby cellular or paging spectrum. Axell 3108S includes Axell Wireless’ proprietary SmartALC power control algorithm. SmartALC is more than simple gain control; it automatically optimizes the gain setting by learning the actual range of RSSI levels over a user-specified period of time. SmartALC prevents oscillations, reduces the amount of isolation required by the system and optimizes the system to minimize noise rise at the donor cell site. SmartALC allows the installer to quickly set up the unit, yet still achieve the design goals specified by the system engineer. The Axell 3108S features three tri-color LEDs, inside the unit, that provide ongoing status and alarm indication. In addition, the Downlink status LED can be used during setup as an RSSI level indicator to help align the donor antenna for optimal performance. The efficient thermal characteristics of the Axell 3108S Repeater, careful component selection and robust design result in high system reliability. Axell 3108S can be remotely controlled and monitored via an external modem which is connected to the repeater through an ethernet cable.



The Axell 3108S mid-power repeater is powerful enough to drive a passive Distributed Antenna system (DAS) for coverage areas over 100,000ft2 (9,290m2) in buildings, parking lots, malls, warehouses and offices.


ELECTRICAL DOWNLINK UPLINK Frequency Range 851 - 869 MHz 806 - 824 MHz

18 / 7 MHz 18 / 7 MHz 18 / 3 MHz 18 / 3 MHz Selectable SAW Filters 18 / 10MHz 18 / 10MHz

Frequency Separation (in-band) 45 MHz 45 MHz Passband Gain 80 ± 2 dB 80 ± 2 dB Passband Ripple ± 2.5 dB ± 2.5 dB Gain Attenuation Range 0 - 31 dB (in 1 dB steps) 0 - 31 dB (in 1 dB steps) Composite Output Power + 31 ± 1 dBm + 24 ± 1dBm Noise Figure @ Maximum Gain (typical) 5 dB 5 dB Propagation Delay < 9.5 μsec < 9.5 μsec GENERAL Power Supply 110 - 240 VAC, 170W Total RF Input Power (no damage) + 10 dBm Impedance Level 50 Ohm RF Connector N-type, Female VSWR 1.5:1 Compliance FCC/IC ENVIRONMENTAL Operating Temperature 14°F to 122°F (-10°C to 50°C) Storage Temperature -22°F to 176°F (-30°C to 80°C) Dimensions W x H x D 20 x 16 x 7 in (500 x 400 x 180 mm) Weight 66 lb (30 kg) Weatherproof IP20

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE (Specification 3108S_rev F) ORDERING INFORMATION

IDENTIFICATION DESCRIPTION PART NUMBER Axell 3108S 800 MHz iDEN mid-power repeater unit (80dB/31dBm) with CCD 18 / 7 MHz MW-CSR-SMR8-3180-18-7 BSR 3108 PS 3108S SMR 800 31dBm 18/10MHz BSR 3108-PS -18-10 BSR 3108 PS 3108S SMR 800 31dBm 18/3MHz BSR 3108-PS -18-3


LMR, TETRA AND MISSION CRITICAL SOLUTIONS

Axell 4008D 800 MHz DIGITAL MULTI -CHANNEL RF SIGNAL BOOSTER

High-power, signal booster that supports TETRA and APCO 25 for public safety networks

Automatic gain control (AGC) per channel (squelch mechanism)

Web based, local and remote monitoring and control

Patented DSP filtering™ technology

Supports up to 12 independent filters; user programmable bandwidth / frequency

User-selectable adjacent channel rejection and time delay to minimize interference

Private Line (PL) detection option

IP65 enclosure

Axell 4008D is a high-power digital multichannel signal booster (DCSB) that features an array of up to 12

DSP based, software-controlled, variable bandwidth filters, user-programmable across the 800 MHz bands.

Axell 4008D supports all public safety technologies. In addition to specifying the center frequency of each

filter, the user can select a filter from a drop down list that has several choices for each passband that vary

in time delay and filter slope; this gives the engineer the unique ability to trade off the adjacent channel

rejection and time delay interference for the coverage area permitting the use of the Axell 4008D in

applications where no other booster solution will work.

Every parameter of Axell 4008D including filter tuning and selection is software-controlled either locally or

remotely via a wireless modem.

The control software is the Axell Wireless Remote Management Tool which is provided with every unit and

is intuitive and user-friendly. The patented Axell‘s digital RF filter not only enables simple initial setup for any

channel plan but permits a simple reconfiguration later if necessary because of rebanding. The booster also

features a per channel AGC that permits equalization of the channel levels for uniform coverage and will

selectively squelch nearby, high power mobiles that would otherwise degrade system sensitivity and

coverage.

The PL detection option based on CTCSS (Continuous Tone Coded Squelch System) will enable using the

same frequency for several networks according to the specific PL code.



The Axell 4008D digital, multi-channel signal booster provides reliable and interference free coverage when in the presence of other services in the adjacent channels.

Axell 4008D Specifications

ELECTRICAL DOWNLINK UPLINK Frequency Range 851 - 869 MHz 806 - 824 MHz Passband Gain 65 - 95 dB Adjustable in 1 dB steps for P25, 50 - 80 dB for TETRA Passband Ripple ± 2.5 dB maximum ± 2.5 dB maximum AGC Dynamic Range 60 dB Filter Bandwidth 12.5 KHz – 4.5 MHz (programmable) Composite Output Power + 40 dBm + 30 dBm Channel Setting Resolution 0.5 kHz Noise Figure @ Maximum Gain 5.0 dB Delay 5-120 μsec depending on filter bandwidth and required adjacent channel rejection GENERAL Power Supply 90-260 VAC (DC Supply optional) Power Consumption < 350 W Total RF Input Power (no damage) +10 dBm Impedance Level 50 Ohm RF Connector N-type, Female VSWR 1.5:1 maximum ENVIRONMENTAL Operating Temperature -5 to 122°F (-10°C to +50°C) Humidity 10% - 90% Condensed Dimensions W x D x H 21.26” x 13.7” x 8.66” (540 x 350 x 220 mm) Weight 73 lbs. (33kg) Enclosure Aluminum IP65 (NEMA 4)

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE (Specification 4008D_rev B)


Axell 4008D Digital Multi Channel Selective Signal Booster 800 12 Channels, 40dBm composite, 95 dB gain, AC powering

MW-DCSB-40D95-800-12-AC



Axell D-SBR 700 DIGITAL CHANNEL SELECTIVE REPEATER for 700MHz LTE BAND

ETSI TS 36.106 V9.0.0 compliant

MCPA technology providing 32dBm Output Power, 82dB Gain

A single unit to support 700 MHz lower and upper bands simultaneously

Supports up to 12 LTE sub-bands with optional non-contiguous sub-bands enabled by programmable innovative DSP filtering

Top level EVM, ACRR and emission performance support latest LTE technologies





Individual Gain and ALC setting for each sub-band for single and multi operator applications

The Axell D-SBR 700 is specifically designed for in-building LTE applications. It supports up to 12 LTE bandwidth channels (1.4, 3, 5, 10, 15 or 20MHz) with optional non-contiguous LTE sub-bands and can meet the needs of any future LTE channel allocation. Axell D-SBR 700 fully meets 3GPP LTE standard requirements. Highly linear components and unparalleled innovative DSP filtering provide top level performance that supports high throughput of the latest LTE technology. Axell D-SBR 700 utilizes Axell Wireless proprietary SmartALC power control algorithm. This algorithm provides more than gain control: it automatically optimizes the gain setting by learning the actual range of RSSI levels over a user-specified period of time and determines when the isolation is becoming a limiting factor for the performance of the system. The SmartALC, together with the low noise figure of the Repeater, minimize noise rise at the donor cell site. SmartALC allows the installer to quickly set up the unit yet achieve the design goals specified by the system engineer. Using an advanced ALC mechanism each one of the sub-bands has an individual gain and ALC setting; hence it is possible to support multi operator applications with a single unit. Axell D-SBR 700 features panel LEDs. These provide ongoing status and alarm indication and can also be used during setup as an RSSI level indicator to help align the donor antenna to the donor sector. The efficient thermal characteristics of the Axell D-SBR 700, careful component selection and robust design result in high system reliability. Axell D-SBR 700 supports Intuitive Web management GUI that can be accessed using any standard browser (no client installation required) through a local or remote (via external modem) connection.

Commercial Off-Air


The Axell D-SBR 700 digital repeater is powerful enough to drive a passive Distributed Antenna system (DAS) for coverage in areas over 50,000ft2 (4,645m2) in buildings, parking lots, malls, warehouses and offices.

Axell D-SBR 700 Specifications

ELECTRICAL DOWNLINK UPLINK Lower band 728 - 746 MHz 698 - 716 MHz

Frequency Upper band 746 - 757 MHz 776 - 787 MHz

Passband Gain 82dB 82dB Passband Ripple ± 2.5dB ± 2.5dB Gain Attenuation Range 0 - 25 dB (in 1 dB steps) 0 - 25 dB (in 1 dB steps) Composite Output Power + 32 dBm + 27 dBm Noise Figure @ Max Gain (typical) 5 dB 4 dB Propagation Delay < 6 μsec < 6 μsec Number of filters (1) 1 to 8 or 1 to 12, each filter can be set to 1.4, 3, 5,10,15 or 20 MHz across the whole band Conformance Standard 3GPP TS 36.106 version 9.0.0 ENVIRONMENTAL Power Supply 110 to 240 VAC, max 160 W Total RF Input Power + 10 dBm Impedance Level 50 Ohm RF Connector N-type Female VSWR 1.5:1 Operating Temperature 14°F to 122°F (-10°C to 50°C) Dimensions W x H x D 12” x 14.76” x 8” (305 x 375 x 205 mm) Weight 28.8 lbs (13 kg) Weatherproof IP65 (NEMA 4)

(1) Support BW option up to 20 MHz by setting the start-stop frequency All parameters are typical at +77° F (+25°C) (Specification Axell D-SBR 700_rev A) SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE


D-SBR 700 Digital filtering channel selective repeater 32dBm, 82dB for 700MHz LTE band, 8 sub-bands

D-SBR 3207

D-SBR 700 Digital filtering channel selective repeater 32dBm, 82dB for 700MHz LTE band, 12 sub-bands

D-SBR 3207-12



Axell 2408 800 MHz CELLULAR BAND SELECTIVE RF MINI REPEATER

Band-selective mini repeater for GSM, TDMA, CDMA2000TM and UMTS networks

Indoor coverage up to 50,000 square feet

Extended A or Extended B and full-band





The Axell 2408 is a cellular band selective mini repeater. The Axell 2408 supports mixed mode transmissions (e.g. GSM and UMTS or CDMA and EVDO) to support simultaneous voice and data. The Axell 2408 is available as either extended A (A, A’ and A’’) or extended B (B and B’). This ensures maximum call quality and will support legacy services. Separate IF-SAW filters ensure rejection of the other band. Either option is also capable of supporting the full cellular band. The Axell 2408 includes Axell Wireless’ proprietary SmartALC power control algorithm. SmartALC is more than simple gain control; it automatically optimizes the gain setting by learning the actual range of RSSI levels over a user specified period of time. SmartALC prevents oscillations, reduces the amount of isolation required by the system and optimizes the system to minimize noise rise at the donor cell site. SmartALC allows the installer to quickly set up the unit, yet still achieve the design goals specified by the system engineer. The Axell 2408 features three tri-color front panel LEDs that provide ongoing status and alarm indication. In addition, the DL LED can be used during setup as an RSSI level indicator to help align the donor antenna for optimal performance. The efficient thermal characteristics of the Axell 2408, careful component selection and robust design result in high system reliability.

Commercial Off-Air


The Axell 2408 mini repeater is cost-effective for simple spot coverage and also powerful enough to drive a passive Distributed Antenna System (DAS) for coverage well over 50,000ft2 (4,645m2). The simple addition of a Axell 2119 PCS mini repeater with the diplexer option, provides dualband coverage through the DAS.

Axell 2408 Specifications


Frequency Range 869 - 894 MHz 824 - 849 MHz Passband Gain 80 dB 80 dB Passband Ripple(1) ± 1.5 dB ± 1.5 dB Gain Attenuation Range 0dB to 31dB (in 1 dB steps) 0dB to 31dB (in 1 dB steps) Composite Output Power + 24 dBm + 24 dBm Noise Figure @ Maximum Gain (typical) 5 dB 5 dB Propagation Delay < 5 μsec < 5 μsec (1) 2 dB at full band GENERAL Power Supply 220/110 VAC, (9VDC option), 35W Total RF Input Power (no damage) +10 dBm Impedance Level 50 Ohm RF Connector N-type, Female VSWR 1.7:1 ENVIRONMENTAL

Operating Temperature 14°F to 122°F (-10°C to +50°C) Storage Temperature -22°F to 176°F (-30°C to +80°C) Dimensions W x H x D 12.2 x 10.6 x 2.8 in. (310 x 270 x 70 mm) Weight 13.2 lb (6 kg) Weatherproof IP51

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE (Specification 2408_rev A)

ORDERING INFORMATION IDENTIFICATION DESCRIPTION PART NUMBER Axell 2408 Cellular mini repeater, A extended and full band MW-CCSR-800AA-1W80 Axell 2408 Cellular mini repeater, B extended and full band MW-CCSR-800BB-1W80



Axell 819 800MHz AND 1900MHz DUAL-BAND RF REPEATER

Small footprint single unit, band selective repeater for both Cellular and PCS networks

Switchable bandwidth option – user-selectable and tunable across both bands

IF-SAW filtering-tunable sharp out-of-band rejection





The Axell 819 is a band selective repeater that supports both cellular and PCS bands. It is specifically designed for simultaneous two-band operation of cellular 800 MHz and PCS 1900 MHz in a single, cost-effective, space-saving wall unit. The Axell 819 has switchable and tunable IF-SAW filters that allow for very high out of-band-rejection, as well as provide a simple means to adjust the pass band according to network band allocation. The unit is reconfigured with possible PCS frequency blocks of 5, 10, 15 or 20 MHz. One of the three blocks is selected by the user and tuned to the desired frequency during setup. In the cellular band it is possible to select one state out of two possible options which cover the cellular band options. Independent tuning and retuning or activation and deactivation of the block filters can be controlled with both a local and remote control system. With this flexibility in the cellular and PCS bands, the Axell 819 can accommodate the frequency block configuration in most US markets and can be easily reconfigured if the local cellular or PCS band plan changes. The Axell 819 includes Axell Wireless’ proprietary SmartALC power control algorithm. SmartALC is more than simple gain control – it automatically optimizes the gain setting by learning the actual range of RSSI levels over a user-specified period of time. SmartALC prevents oscillations, reduces the amount of isolation required by the system and optimizes the system to minimize noise rise at the donor cell site. SmartALC allows the installer to quickly set up the unit, yet still achieve the design goals specified by the system engineer. The Axell 819 panel LEDs, in addition to providing ongoing status and alarm indication, can be used during setup as an RSSI level indicator to help align the donor antenna to the donor cell site. Axell 819 supports intuitive web management GUI that can be accessed using any standard browser through a local or remote connection (no client installation required). Axell 819 remote monitoring and control is implemented by an integrated wireless modem and a controller supporting SNMP.

Commercial Off-Air


Axell 819 Specification ELECTRICAL DOWNLINK UPLINK

Frequency Range Cellular

869 - 894 MHz PCS

1930-1990 MHz Cellular

824 - 849 MHz PCS

1850-1910 MHz

Selectable blocks 2 selectable states

1: A” + A + A’ 2: B + B’

2 options A: 5, 10 or 15 MHz B: 5, 10 or 20 MHz

2 selectable states 1: A” + A + A’

2: B + B’

2 options A: 5, 10 or 15 MHz B: 5, 10 or 20 MHz

Frequency Separation (in band) 45 MHz 60 MHz 45 MHz 60 MHz Passband Gain 80 dB 80 dB 80 dB 80 dB Passband Ripple (typical) ± 2.5 dB ± 2.5 dB ± 2.5 dB ± 2.5 dB Gain Attenuation Range (1 dB steps) 0 to 25 dB 0 to 25 dB 0 to 25 dB 0 to 25 dB Composite Output Power 21 dBm 21 dBm 21 dBm 21 dBm Noise Figure @ Maximum Gain (typ.) 5.5 dB 5.5 dB 5.5 dB 5.5 dB Propagation Delay < 5 μsec < 5 μsec < 5 μsec < 5 μsec GENERAL Power Supply 100-240 VAC, <100W Total RF Input Power (no damage) + 10 dBm Impedance Level 50 Ohm RF Connector N-type, Female VSWR 1.7:1 ENVIRONMENTAL Operating Temperature -14°F to 122°F (-10°C to 50°C) Storage Temperature -22°F to 176°F (-30°C to 80°C) Dimensions W x H x D 14” x 5.7” x 18” (355 x 145 x 460 mm) Weight 35.2 Ibs (16 kg) Enclosure IP65 (NEMA 4)

(Specification 819_rev D) SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE ORDERING INFORMATION IDENTIFICATION DESCRIPTION PART NUMBER

Axell 819 Dual band - cellular/PCS band selective RF repeater w/1XCDMA modem 5/10/15 MHz filters or PCS

MW-CSR-CELL-PCS-2480-M1X

Axell 819 Dual band - cellular/PCS band selective RF repeater w/1XCDMA modem 5/10/20 MHz filters or PCS

MW-CSR-CELL-PCS-2480-P20-M1X



Axell 2117 AWS CHANNEL SELECTIVE RF MINI REPEATER

Channel selective mini repeater for AWS (Advanced Wireless Services)

Switchable bandwidth option – user-selectable and tunable across the AWS band

IF-SAW filtering – tunable, sharp out-of-band rejection

Supports CDMA1X,EV-DO and WCDMA technologies





The Axell 2117 is available with a single frequency block of 5, 10 or 15MHz. This feature permits the user to

select, via the control software, one of three band or sub-band filters and tune it anywhere in the AWS

frequency range. This allows the operator to inventory a single model number that can be configured easily

for different markets in the network.

The Axell 2117 includes Axell Wireless proprietary SmartALC power control algorithm. SmartALC is more

than simple gain control; it automatically optimizes the gain setting by learning the actual range of RSSI

levels over a user-specified period of time. SmartALC prevents oscillations, reduces the amount of isolation

required by the system and optimizes the system to minimize noise rise at the donor cell site. SmartALC

allows the installer to quickly set up the unit, yet still achieve the design goals specified by the system

engineer.

The Axell 2117 features three tri-color front panel LEDs, which in addition to providing ongoing status and

alarm indication, can be used during setup as an RSSI level indicator to help align the donor antenna to the

donor sector. The efficient thermal characteristics of the Axell 2117, careful component selection and robust

design result in high system reliability.

Remote monitoring and control of the Axell 2117 is enabled using an optional external modem. The repeater

can then be monitored and controlled using the Axell Wireless NMS, OMC solution

Commercial Off-Air


The Axell 2117 mini repeater is cost-effective for simple spot coverage and also powerful enough to drive a passive Distributed Antenna System (DAS) for coverage well over 50,000ft2 (4,645m2).

Axell 2117 Specification

ELECTRICAL DOWNLINK UPLINK Frequency Range 2110 - 2155 MHz 1710 - 1755 MHz Passband Gain 70dB 70 dB Passband Ripple ±2 dB ±2 dB Gain Attenuation Range 0 to 20 dB (in 1 dB steps) 0 to 20 dB (in 1 dB steps) Composite Output Power + 21 dBm + 21 dBm Noise Figure @ Maximum Gain (typ.) 5 dB 5 dB Propagation Delay < 5 μsec < 5 μsec Filter Options 5 or 10 or 15 MHz 5 or 10 or 15 MHz Supported technologies CDMA 1x,CDMA EV-DO, WCDMA, GSM GENERAL Power Supply 110 to 220 VAC Total RF Input Power (no damage) + 10 dBm Impedance Level 50 Ohm RF Connector N-type Female VSWR 1.7:1 ENVIRONMENTAL Operating Temperature -4°F to 122°F (20°C to 50°C) Storage Temperature -22°F to 176°F (-30°C to 80°C) Dimensions L x W x H 12.2” x 10.6” x 2.8” (310 x 270 x 70 mm) Weight 13.2 Ibs (6 kg) Enclosure IP51

(Specification 2117_rev B) SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE

ORDERING INFORMATION IDENTIFICATION DESCRIPTION PART NUMBER Axell 2117 AWS repeater 21dBm,70dB gain 5,10,15MHz selectable sub-bands MW-CCSR-AWS-2170-5-10-15



Axell 2119 1900MHz BAND SELECTIVE RF MINI REPEATER

Supports GSM, TDMA, CDMA2000™ and UMTS networks

Indoor coverage well over 50,000 square feet

Switchable bandwidth option – tunable across band





The Axell 2119 is a PCS band selective mini repeater, which supports mixed mode transmissions (e.g. GSM

and UMTS or CDMA and EVDO) to support simultaneous voice and data.

The Axell 2119 is available with a single frequency block of 5, 10 or 15MHz. This feature permits the user to

select, via the control software, one of three band or sub-band filters and tune it anywhere in the PCS

frequency range. This allows the operator to inventory a single model number that can be configured easily

for different markets in the network but also to reselect the band if the frequency plan in any market

changes. The Axell 2119 includes Axell Wireless’ proprietary SmartALC power control algorithm.

SmartALC is more than simple gain control; it automatically optimizes the gain setting by learning the actual

range of RSSI levels over a user specified period of time.

SmartALC prevents oscillations, reduces the amount of isolation required by the system and optimizes the

system to minimize noise rise at the donor cell site.

SmartALC allows the installer to quickly set up the unit, yet still achieve the design goals specified by the

system engineer. The Axell 2119 features three tri-color front panel LEDs that provide ongoing status and

alarm indication. In addition, the Downlink status LED can be used during setup as an RSSI level indicator

to help align the donor antenna for optimal performance.

The efficient thermal characteristics of the Axell 2119, careful component selection and robust design result

in high system reliability.

Commercial Off-Air


The Axell 2119 mini repeater is cost-effective for simple spot coverage and also powerful enough to drive a passive Distributed Antenna System (DAS) for coverage well over 50,000ft2 (4,645m2). The diplexer option permits the simple addition of an Axell 2408 cellular mini repeater to provide dual-band coverage through the DAS.

Axell 2119 Specification


Frequency Range (1) 1930-1990 MHz 1850-1910 MHz

Passband Gain 80 dB ± 1 dB 80 dB ± 1 dB

Passband Ripple ± 1.5 dB ± 1.5 dB

Gain Attenuation Range 0 to 30 dB (in 1 dB steps) 0 to 30 dB (in 1 dB steps)

Composite Output Power + 21 dBm + 21 dBm

Noise Figure @ Maximum Gain (typ.) 5 dB 5 dB

Propagation Delay < 5 μsec < 5 μsec (1) Bands are pre-tuned to customer specifications but are user tunable across the band. GENERAL Power Supply 220/110 VAC, 35W Total RF Input Power (no damage) + 10 dBm Impedance Level 50 Ohm RF Connector N-type, Female VSWR 1.7:1 ENVIRONMENTAL Operating Temperature -4°F to 122°F (-20°C to 50°C) Storage Temperature -22°F to 176°F (-30°C to 80°C) Dimensions L x W x H 12.2” x 10.6” x 2.8” (310 x 270 x 70 mm) Weight 13.2 lbs (6 kg) Enclosure IP11

(Specification 2119_rev B) SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE

ORDERING INFORMATION IDENTIFICATION DESCRIPTION PART NUMBER Axell 2119 PCS mini repeater - 5, 10, 15 MHz selectable bands MW-CCSR-PCS-1W80-5-10-15


MULTI-BAND COVERAGE SOLUTIONS

DIGI-mini - Americas DIGITAL MULTI-BAND MINI REPEATER

Innovative digital mini repeater at price of legacy analog mini repeater

Up to four frequency bands in two compact enclosures

Software Defined Filtering of up to 6 sub-bands in each individual frequency band

Single and dual band units for 700/1700 MHz and 850/1900 MHz

Individual gain and ALC settings for each sub-band for single and multi-operator applications

Ideal for flexible In-building applications Axell Wireless’ new DIGImini repeater (digital mini repeater) is an innovative flexible multiband coverage solution optimized for in-building applications. Axell Wireless’ DIGImini offers a completely new range of possibilities. With multi technology (e.g GSM/ WCDMA) applications, multiple filters are required in the operation bands. The DIGImini is designed to provide high performance digital filters with a competitive price to legacy analog mini repeaters. Up to four different frequency bands can be implemented in 2 dual band DIGImini repeaters. Each DIGImini repeater can be a single band 700/ 850/1700/1900 MHz or dual band 700/1700 MHz or 850/1900 MHz. Easy “plug and play“ allows our customers to add services as needed, thus minimizing their CAPEX. Software Defined Filtering of up to 6 sub-bands in each individual frequency band can be supported in a single or dual band configuration. Individual Gain and ALC settings for each sub-band for multi-technology applications (e.g GSM/WCDMA) for single and multi-operator applications. A state-of-the-art Interference Mitigation and Oscillation Prevention (IMOP) is used to measure the isolation between the antennas and gain is reduced immediately to prevent oscillation. The DIGImini is connected to one donor antenna placed on the roof of the building and the radiating coaxial cable or antennas in the area to be covered. Configuration and monitoring of the DIGImini can be done through an intuitive web management GUI. Remote management is done via wireless modem. With the Axell Wireless advanced supervision and control software, the entire fleet of digital multi-band repeaters can be monitored

Axell Wireless’ DIGImini repeater is powerful enough to drive a passive Distributed Antenna system (DAS) for coverage areas up to 25,000 ft2 (2,322m2) in buildings, parking lots, malls, warehouses and offices.

Commercial Off-Air

Singleband / Dual band

Tri band / Quad band


DIGI-mini Specification

700 MHz FREQUENCY BAND Downlink Uplink Operating Frequency Range Lower band 728-746MHz

Or Upper band 746 - 757MHz

Lower band 698-716MHz Or Upper band 776 - 787MHz

Output power at antenna port (composite) 22dBm 22dBm Pass band maximum gain 73dB 73dB Gain attenuation range 0-25dB (in 1dB steps) 0-25dB (in 1dB steps) Pass band ripple ± 2.5dB ± 2.5dB Noise Figure @ max gain 6dB 6dB Propagation delay 6 μsec 6 μsec Number of filters per band (*) Up to 6 Up to 6 1700 MHz FREQUENCY BAND Operating Frequency Range 2110-2155MHz 1710-1755MHz Output power at antenna port (composite) 22dBm 22dBm Pass band maximum gain 73dB 73dB Gain attenuation range 0-25dB (in 1dB steps) 0-25dB (in 1dB steps) Pass band ripple ± 2.5dB ± 2.5dB Noise Figure @ max gain 6dB 6dB Propagation delay 6 μsec 6 μsec Number of filters per band (*) Up to 6 Up to 6 850 MHz FREQUENCY BAND Operating Frequency Range 869-894MHz 824-849MHz Output power at antenna port (composite) 22dBm 22dBm Pass band maximum gain 73dB 73dB Gain attenuation range 0-25dB (in 1dB steps) 0-25dB (in 1dB steps) Pass band ripple ± 2.5dB ± 2.5dB Noise Figure @ max gain 6dB 6dB Propagation delay 6 μsec 6 μsec Number of filters per band (*) Up to 6 Up to 6 1900 MHz FREQUENCY BAND Operating Frequency Range 1930-1990MHz 1850-1910MHz Output power at antenna port (composite) 22dBm 22dBm Pass band maximum gain 73dB 73dB Gain attenuation range 0-25dB (in 1dB steps) 0-25dB (in 1dB steps) Pass band ripple ± 2.5dB ± 2.5dB Noise Figure @ max gain 6dB 6dB Propagation delay 6 μsec 6 μsec Number of filters per band (*) Up to 6 Up to 6 ELECTRICAL SPECIFICATION Power Supply 110/240 VAC Power Consumption <70 Watt for dual band, < 45 W for single band ENVIRONMENTAL SPECIFICATION Operating Temperature Range 0 to 50°C Humidity 85%, ETS 300 019-1-3 Class 3.1 MTBF, complete system >70 000 hrs MECHANICAL SPECIFICATION Dimensions 11.77” x 12” x 3.03” (b x h x d) Installation wall mount Weight 8.9 Ibs for dual band Complies with FCC

(*) Supports every BW option 200kHz-25MHz by setting the start-stop frequency. Total number of filters is 6 in dual band (Specification DIGImini_Americas_rev A) SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE

ORDERING INFORMATION Identification Description Part Number DIGI Mini 850/1900 DIGI mini 850/1900 6 sub bands D-MINI-2208-2219 DIGI Mini 700U/1700 DIGI mini 700 Upper/1700 6 sub bands D-MINI-2207U-2217 DIGI Mini 700L/1700 DIGI mini 700 Lower/1700 6 sub bands D-MINI-2207L-2217 DIGI Mini 850 DIGI mini 850 6 sub bands D-MINI-2208 DIGI Mini 1900 DIGI mini 1900 6 sub bands D-MINI-2219 DIGI Mini 1700 DIGI mini 1700 6 sub bands D-MINI-2217 DIGI Mini 700U DIGI mini 700 upper 6 sub bands D-MINI-2207U DIGI Mini 700L DIGI mini 700 Lower 6 sub bands D-MINI-2207L DIGI Mini Modem DIGI mini GPRS modem D-MINI-GPRS-M DIGI Mini Modem DIGI mini CDMA1X modem (Verizon) D-MINI-CDMA1X-M


MULTI-BAND COVERAGE SOLUTIONS

D-MBR - Americas DIGITAL MULTI-BAND REPEATER

Designed to meet North American frequency requirements Up to four frequency bands in one compact enclosure Software Defined Filtering of up to 12 sub-bands in each frequency band Band modules for 700MHz (LTE), 850MHz (Cellular), 1700MHz (AWS) and 1900MHz (PCS) Individual gain and ALC settings for each sub-band for single and multi-operator applications Ideal for flexible In-building applications Complies with TS 36.106 (LTE) and TS 25.106 (WCDMA) standards Supports 700MHz upper and lower bands simultaneously

The new Digital Multi-Band Repeater (D-MBR) from Axell Wireless is a flexible, multi-band coverage solution optimized for in-building applications. The D-MBR is based on the Axell Wireless’ innovative digital filtering technology which support current and future frequency allocation. Up to four different frequency bands can be implemented in one repeater casing. The solution can be equipped with modules covering the 700MHz, 850MHz, 1700MHz and 1900MHz bands. For each of these frequency bands, the D-MBR can provide selection and amplification of up to 12 sub bands of programmable bandwidth with the new software defined filtering module. Using an advanced ALC mechanism each one of the sub bands has an individual gain and ALC setting. The Digital Mulitband repeater has a separate module for each frequency band. This architecture allows redundancy, i.e. failure in one of the band modules will not have any impact on the other band modules. Dedicated DSP per band allows the support of full bandwidth for each band without any limitation. The D-MBR is connected to one donor antenna placed on the roof of a building and the radiating coaxial cable or antennas in the area to be covered. Configuration and monitoring of the D-MBR can be done through an intuitive web management GUI, either locally or remotely via a wireless modem. With the Axell Wireless advanced supervision and control software, the entire fleet of digital multi-band repeaters can be monitored.

ORDERING INFORMATION IDENTIFICATION DESCRIPTION (All with wireless modem as standard.) PART NUMBER D-MBR 700/850/1700/1900

Quad Band 700/850/AWS/PCS MCPA 32dBm / 30dBm / 30dBm / 30dBm, 8 filters per band.

D-MBR 3207-3008-3017-3019

D-MBR 700/850/1700/1900

Quad Band 700/850/AWS/PCS MCPA 32dBm / 30dBm / 30dBm / 30dBm, 12 filters per band.

D-MBR 3207-3008-3017-3019-12

D-MBR 700/850/1900

Tri Band 700/850/PCS MCPA 32dBm / 30dBm / 30dBm, 8 filters per band; one open slot remaining in chassis for future expansion

D-MBR 3207-3008-3019

D-MBR 700/850/1900

Tri Band 700/850/PCS MCPA 32dBm / 30dBm / 30dBm, 12 filters per band; one open slot remaining in chassis for future expansion

D-MBR 3207-3008-3017-3019-12

D-MBR 700/850

Dual Band 700/850 MCPA 32dBm / 30dBm, 8 filters per band; two open slots remaining in chassis for future expansion

D-MBR 3207-3008

D-MBR 700/850

Dual Band 700/850 MCPA 32dBm / 30dBm, 12 filters per band; two open slots remaining in chassis for future expansion

D-MBR 3207-3008-12

D-MBR 700/1900

Dual Band 700/PCS MCPA 32dBm / 30dBm, 8 filters per band; two open slots remaining in chassis for future expansion

D-MBR 3207-3019

D-MBR 700/1900


D-MBR 3207-3019-12

D-MBR 850/1900


D-MBR 3008-3019

D-MBR 850/1900


D-MBR 3008-3019-12

D-MBR AK Wall mount accessory kit D-MBR-WM-KIT

Commercial Off-Air


The Axell Wireless D-MBR repeater is powerful enough to drive a passive Distributed Antenna system (DAS) for coverage areas over 100,000ft2 (9,290m2) in buildings, parking lots, malls, warehouses and offices.

D-MBR Specification

RADIO MODULE FOR 700 MHz DOWNLINK UPLINK Operating Frequency Range Lower band 728-746MHz 698-716MHz Operating Frequency Range Upper band 746-757MHz 776-787MHz Output power at antenna port (composite) 32dBm 27dBm Pass band maximum gain 82dB 82dB Gain attenuation range 0-25dB (in 1dB steps) 0-25dB (in 1dB steps) Pass band ripple ± 25dB ± 25dB Noise Figure @ max gain 5dB 4dB Propagation delay < 6 μsec < 6 μsec Number of filters (1) 1 to 8 or 1 to 12 1 to 8 or 1 to 12 RADIO MODULE FOR 850 MHz (CELLULAR) Operating Frequency Range 869-894MHz 824-849MHz Output power at antenna port (composite) 30dBm 27dBm Pass band maximum gain 82dB 82dB Gain attenuation range 0-25dB (in 1dB steps) 0-25dB (in 1dB steps) Pass band ripple ± 2.5dB ± 2.5dB Noise Figure @ max gain 5dB 3.5dB Propagation delay < 6 μsec < 6 μsec Number of filters (1) 1 to 8 or 1 to 12 1 to 8 or 1 to 12 RADIO MODULE FOR 1700 MHz (AWS) Operating Frequency Range 2110-2155MHz 1710-1755MHz Output power at antenna port (composite) 30dBm 27dBm Pass band maximum gain 82dB 82dB Gain attenuation range 0-25dB (in 1dB steps) 0-25dB (in 1dB steps) Pass band ripple ± 2.5dB ± 2.5dB Noise Figure @ max gain 5dB 3.5dB Propagation delay < 6 μsec < 6 μsec Number of filters (1) 1 to 8 or 1 to 12 1 to 8 or 1 to 12 RADIO MODULE FOR 1900MHz Operating Frequency Range 1930-1990MHz 1850-1910 MHz Output power at antenna port (composite) 30dBm 27dBm Pass band maximum gain 82dB 82dB Gain attenuation range 0-25dB (in 1dB steps) 0-25dB (in 1dB steps) Pass band ripple ± 2.5dB ± 2.5dB Noise Figure @ max gain 5dB 3.5dB Propagation delay < 6 μsec < 6 μsec Number of filters (1) 1 to 8 or 1 to 12 1 to 8 or 1 to 12 ELECTRICAL SPECIFICATION Power Supply 110/240 VAC Power Consumption max 320W for 3 bands, max 400W 4 bands ENVIRONMENTAL SPECIFICATION Operating Temperature Range 14°F to 122°F (-10°C to +50°C) Storage Temperature Range -40°F to 185°F (-40°C to +85°C) Complies with FCC/UL Humidity 85% MTBF, complete system >70 000 hours MECHANICAL SPECIFICATION Dimensions 19” x 5U rack x 19.7” (b x h x d), (450 x 225 x 500 mm) Weight 77 lbs (35 kg) for 3 bands, 86 lbs (39 kg) for 4 bands

ALL PARAMETERS ARE TYPICAL AT +77°F (+25°C). SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE (1) Supports B/W option up to 20MHz by setting the start-stop frequency (Specification D-MBR _rev C_USA_MCPA)


OMU

Optical Master Unit The Optical Master Unit (OMU) is used to convert signals from RF to light when fiber fed repeaters are used. The OMU is most often connected to a base station. In these cases, an RF coupler is used to couple off signals that are fed into the OMU. An entry shelf unit can also be used in cases when the base station and the OMU are not located close to each other. In the downlink direction, the OMU picks up the signal from the base station, converts it into an optical signal and transfers it over a fiber optical cable to the repeater. In the uplink direction the OMU receives the signal from the repeater via the fiber optical cable, converts it to a RF signal and sends it back to the base station.

AUTOMATIC OPTICAL GAIN SETTING The fiber optic system Axell Wireless has designed puts a clear focus on user friendliness and ease of installation and commissioning. Through an automatic optical gain setting, the commissioning is easily performed, thus reducing the time it takes to put the equipment in service. This also means that the training is significantly simplified and the need for installation effort is decreased.

RELIABILITY IN SECURITY NETWORKS TETRA is often used in security critical applications and Axell Wireless has therefore made reliability and redundancy a key element in its design of fiber optic systems. By using what is often referred to as a star typology, each remote unit has its own direct fiber connection to the OMU. One dedicated single fiber, carrying both UL and DL signals (WDM or Wavelength Division Multiplexing technology), is then used to serve each remote unit. Although it is preferable to use this type of configuration, a chain configuration where the signal in the DL is coupled off to several remote units is also possible to realize when there is a shortage of fiber.

EXPANDABLE SOLUTION Each OMU can be equipped with up to six optical modules and therefore support up to six fiber-fed remote units. If additional repeaters are to be fed from the same base station, it is simple to expand the system with additional OMU units that in total will support up to 24 fiber-fed remote units.

REMOTE SUPERVISION Only one modem is needed to communicate with an OMU and its fiber fed repeaters. The modem types available are GSM, PSTN, TCP/IP and even GSM-R. The modem is found inside the OMU and communication with the fiber fed remote units is transparently handled via the fiber that connects them. The system can be managed via the Axell Wireless Repeater supervision and remote control software tool, AEM (Axell Wireless Element Manager). All communication between the OMU and the repeaters – both data communication and the transferred RF signal – is managed over the same fiber link, which results in a very reliable supervision of the radio link. The OMU supports VHF, TETRA, TETRAPOL, GSM-R, UMTS and GSM900, GSM1800 ,1900MHz and 2600MHz frequency bands and is always used in combination with one or several fiber fed repeater(s).



RemoteRepeater

Sites

Base StationSite

axellWIRELESS

axellWIRELESS

axellWIRELESS

axellWIRELESS

axellWIRELESS

axellWIRELESS

OpticalFiberLinks

Directional Couplers

OMU

OMU Specifications

RF Parameters Frequency bands 68-960/1710-2700 MHz Gain Flatness typical 2 dB (p-p) Nominal RF input power +10 dBm composite power Maximum Absolute RF input power +23 dBm composite power Number of optical modules 1-6 Laser class Class 3 Master Optical Module Electrical Specification

Master 1310 ± 10 nm or 1330 ± 10 nm Optical Wavelengths

Slave 1510 ± 3 nm or 1530 ± 3 nm or 1550 ± 3 nm or 1570 ± 3 nm or 1590 ± 3 nm Optical output power Master +5 ± 2 dBm Slave +5 ± 2 dBm Maximum Optical Input Power +5 dBm Output Power (TX) max +7 dBm Operating Temperature 5°C to 45°C Automatic fiber optic loss compensation Yes Power Requirements Power Requirements 230/115 VAC, 50/60 Hz, 24/-48 VDC Power Consumption Typical 50 W (fully equipped) External Electrical Interfaces Local Maintenance Terminal RS232 RF Ports N-type Connector Female Optical Ports SC/APC AC/DC Mains Input Plinth External alarms Plinth Modem connector RJ45 or RJ11 Modem antenna connector SMA Ethernet connector RJ45 Mechanical Specifications Dimensions (w x h x d) 17.5 x 5.2 x 11.4 in (444 x 132.5 x 291 mm) 19” rack Weight 15 kg (fully equipped) IP rating IP20 Reliability Specification Lifetime (MTBF) >70 000 hrs

(Specification OMU_rev G) SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE


UHF FIBER FED REPEATER

BSF424 FIBER OPTIC REPEATER

Supports the use of Wavelength Division Multiplexing (WDM) technology resulting in a limited need for fibers.

Remote supervision and alarm handling in the BSF424 is realized through the fiber connection via the OMU unit’s modem or optional via built in modem

The unique combination of high output power and highly linear power amplifiers ensures large coverage with uniformly excellent signal quality

The BSF424 can optionally be upgraded with a second optical transceiver module for redundant fiber applications

The BSF424 is a fiber optic fed UHF repeater. The repeater is part of a system that is fed from an Optical

Master Unit (OMU). The maximum optical loss allowed for is 10 dB of fiber between the OMU and the most

distant last remote unit that the OMU supports. This offers great flexibility when providing RF coverage in

areas where it is not possible to rely on off air transmission. The fiber optic system is easily remotely

monitored and controlled by Axell Wireless effective supervision tool, Axell Wireless Element Manager.

AUTOMATIC OPTICAL GAIN SETTING

The optical gain is adjusted in the downlink chain by measuring the level of the pilot carrier sent from the

OMU. The level of the received pilot carrier is continuously monitored.



BSF424 Specifications

Frequency Bands Available (MHz) Downlink Uplink 390-395 380-385 395-400 385-390 420-425 410-415 425-430 415-420 460-465 450-455

465-470 455-460 Operator bandwidth 5 MHz Duplex distance 10 MHz Impedance 50 Ω

Output power/carrier (D/L) 1 carrier: +36 dBm, 2 carriers: +33 dBm,

3-4 carriers: +30 dBm, 8 carriers: +27 dBm IP3 > +68dBm Noise figure (U/L) <6dB, 5dB typical at maximum gain Group delay 2us max Fiber optic loss compensation implemented Spurious emissions from RF port < -36dBm Intermodulation Products < -36dBm Optical Module Electrical Specification Optical Wavelength Two color system Three color system Four color system Master 1310 ± 10 nm 1310 ± 10 nm 1310 ± 10 nm Slave 1 1550 ± 3 nm 1550 ± 3 nm 1550 ± 3 nm Slave 2 N/A 1510 ± 3 nm 1510 ± 3 nm Slave 3 N/A N/A 1550 ± 3 nm Maximum optical output power +3 dBm ±2 dB Maximum optical input power +2 dBm Power requirements 230 VAC 50Hz, 115 VAC 60Hz, –48 VDC Power consumption <100 W, typical External Connection Local maintenance terminal RS232 Server Port 7/16 DIN Female Optical Ports 1 x SC/APC Female Modem antenna connector SMA Remote connection via OMU or (optional) GSM, GSM-R PSTN Modem or Ethernet Mechanical Specification Dimensions 21.2” x 13.7” x 5/9” (540 x 350 x 150 mm) Enclosure Aluminum (IP65) Weight 61.7 lbs (28 kg) Cooling Convection Environmental Specification Operating temperature -77 to + 131°F (-25 to + 55°C) Storage temperature -86 to + 158°F (-30 to + 70°C)

(BSF424_UHF_rev E) SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE



SMR 700/SMR 800

Fiber-Fed Radio Head - High Power for Public Safety

High Output Power

Convection Cooling

One, Two or Three Bands in One Small Enclosure

Low Noise Figure Leading to Higher System Sensitivity

Advanced and User-friendly Remote Control and Supervision

The Multi-Band Fiber Optic (MBF) fed radio head provides solutions for indoor and outdoor environments. It offers seamless coverage for indoor environments such as tunnels, subways and large buildings and for outdoor environments the MBF can be deployed to augment and/or replace Macro Cells. The MBF-High Power provides up to +39 dBm composite output power while utilizing convection cooling techniques eliminating the need for fans and increasing Mean Time Between Failure (MBTF) values. The higher output power levels decrease the number of MBF nodes required for deployment which in turn lowers capital and reoccurring costs. Axell Wireless' robust fiber optic system allows MBF nodes to be installed up to 12.5 miles from the base station providing greater flexibility when designing radio frequency (RF) coverage for outdoor distributed antenna systems. Furthermore, Axell Wireless can provide a complete line of passive products (combiners, filters and couplers) as well as a state-of-the-art Element Manager (AEM). The MBF-High Power product family includes single, dual and triple band options conveniently co-located in one small enclosure.

SINGLE BAND The Single band version is available for SMR 800 MHz

DUAL BAND The Dual band version is available for SMR 700/SMR 800 MHz



Note ! This specification covers the RF-part of a typical Fiber Fed repeating system. Optimum levels for fiber to RF and typical fiber link NFs are assumed. Please refer to Axell Wireless OMU for more details on the Fiber to RF properties. SMR 700/SMR 800 Specifications

FREQUENCY RANGE SMR 700 MHz SMR 800 MHz Downlink 793-805 MHz 806-824 MHz Uplink 763-775 MHz 851-869 MHz Operational Bandwidth 12 MHz 18 MHz Composite Output Power 39 dBm 39 dBm Gain U/L and D/L Nominal 30 dB, Adjustable, in 1 dB steps. System impedance 50 Ω Return loss at antenna connections > 16 dB Antenna connectors 7/16 DIN, female duplex Electrical ratings 115 VAC, 230 VAC (alt. – 48 VDC) Passband Ripple < 2 dB TOTAL POWER CONSUMPTION Single Band 220W (at 39 dBm power output) Dual Band 350W (at 39 dBm power output) Noise Figure 3 dB typical (maximum gain) Propagation Delay < 2 μsec MECHANICAL DIMENSIONS Dimensions - Single Band 21.26 x 13.78 x 5.9 Inches (540 x 350 x 150 mm) Weight Single - Band 46.3 Ibs (21 kg) Dimensions - Dual Band 21.26 x 13.78 x 5.9 Inches (540 x 350 x 150 mm) Weight - Dual Band 50.7 lbs (23 kg) ENVIRONMENTAL Enclosure (Single and Dual band) IP65 (NEMA 4) Operational Temperature Range -77 to +131°F (-25 to + 55°C) Storage Temperature Range -86 to +158°F (-30 to + 70°C) MTBF > 100000 hrs COMPLIES WITH

Radio FCC part 15 Subpart B (2002), Class B ,

Radio frequency devices, Unintentional radiators FCC part 24 Subpart E ( 2002 ), Personal communications services, Broadband PCS

Safety UL 60 950-1, First Edition ”Information Technology Equipment" – Safety - Part 1: general requirements UL 50 11th Edition “Enclosures for Electrical Equipment”

(Specification MBF-SMR700/800-HP-PS_rev B) SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE

OMU


850/1900/AWS/LTE700

MBF

MBF-RADIO HEAD - HIGH POWER

High Output Power

Low Noise Figure Leading to Higher System Sensitivity

One, Two or Three Bands in One Small Enclosure

Advanced and User-friendly Remote Control and Supervision

Convection Cooling

The Multi-Band Fiber Optic Fed (MBF) radio head provides solutions for indoor and outdoor environments. It offers seamless coverage for indoor environments such as tunnels, subways and large buildings and for outdoor environments the MBF can be deployed to augment and/or replace Macro Cells. The MBF-High Power provides up to +42 dBm composite output power while utilizing convection cooling techniques eliminating the need for fans and increasing Mean Time Between Failure (MBTF) values. The higher output power levels decrease the number of MBF nodes required for deployment which in turn lowers capital and reoccurring costs. Axell Wireless' robust fiber optic system allows MBF nodes to be installed up to 12.5 miles from the base station providing greater flexibility when designing radio frequency (RF) coverage for outdoor distributed antenna systems. Furthermore, Axell Wireless can provide a complete line of passive products (combiners, filters and couplers) as well as a state-of-the-art Element Manager (AEM). The MBF-High Power product family includes single, dual and triple band options conveniently co-located in one small enclosure. SINGLE BAND The Single band version is available for 850 MHz, 1900 MHz, AWS or LTE 700

DUAL BAND The Dual band version is available in any combination of 850 MHz, 1900 MHz, AWS or LTE 700

TRI BAND The Tri band version is available for 850 MHz, 1900 MHz, AWS or LTE 700



Note ! This specification covers the RF-part of a typical Fiber Fed repeating system. Optimum levels for fiber to RF and typical fiber link NFs are assumed. Please refer to Axell Wireless OMU for more details on the Fiber to RF properties. MBF Specifications

FREQUENCY RANGE AWS 1900 850 LTE 700 Lower band 728-746 MHz

Downlink 2110 - 2155 MHz 1930 - 1990 MHz 869 - 894 MHz Upper band 746-757 MHz Lower band 698-716 MHz

Uplink 1710 - 1755 MHz 1850 - 1910 MHz 824 - 849 MHz Upper band 776-787 MHz

Lower band 18 MHz Operational Bandwidth 45 MHz 60 MHz 25 MHz

Upper band 11 MHz Composite Output Power (1) 39/42 dBm 37/40 dBm 37/40 dBm 37/40 dBm Gain UL/D Nominal 30 dB, Adjustable, in 1 dB steps. System impedance 50 Ω Return loss at antenna connections > 16 dB Antenna connectors 7/16 DIN, female duplex Electrical ratings 115 VAC, 230 VAC (alt. -48 VDC) Passband Ripple < 2 dB TOTAL POWER CONSUMPTION SINGLE BAND DUAL BAND TRI BAND 37/39 dBm option 140W 220W 350W 40/42 dBm option (1) 220W 350W --- Noise Figure 3 dB typical (maximum gain) Propagation Delay < 2 μsec MODULATION ACCURACY AT NOMINAL OUTPUT POWER GSM / GSMK < 2.5˚ RMS and < 10˚ peak EDGE / 8-PSK < 3 % EVM RMS WCDMA / EVM < 12.5 % RMS (composite according to ETSI TS 25.106 with TM 1/64 DPCH) WCDMA / PkCDE < - 33 dB (according to ETSI TS 25.106 with TM 1/64 DPCH and spreading factor 256) LTE According to TS 36.106 Frequency Stability According to FCC (see below) Unwanted emission According to FCC (see below) MECHANICAL DIMENSIONS ENCLOSURE WEIGHT

Single band 21.26 x 13.78 x 5.9 Inches

(540 x 350 x 150 mm) IP65 (NEMA 4) 46.3 Ibs (21 kg)

Dual band 21.26 x 13.78 x 5.9 Inches


Tri band 21.26 x 13.78 x 8.7 Inches


ENVIRONMENTAL TEMPERATURE RANGE STORAGE TEMPERATURE MTBF - 77 to + 131 °F

(-25 to + 55 °C) - 86°F to 158°F (-30°C to 70°C)

> 100000 hours

COMPLIES WITH

Radio FCC part 15 Subpart B ( 2002 ), Class B , Radio frequency devices, Unintentional radiators

FCC part 24 Subpart E ( 2002 ), Personal communications services, Broadband PCS

Safety UL 60 950-1, First Edition” Information Technology Equipment – Safety - Part 1 : General requirements

UL 50 11th Edition “Enclosures for Electrical Equipment”

(1) 40/42 dBm option only available in single or dual band. (Specification MBF850_1900_AWS_LTE- HP_rev B) SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE

OMU


NETWORK MANAGEMENT AND CONTROL

RMC and AEM Complete Network Management Axell Wireless supplies two powerful software tools - RMC and

AEM - for the configuration and management of repeaters either

singly or in networks. Both applications are Windows™ based

and run on Windows 2000 and Windows XP. The AEM can also

be run on Windows 2003 Server. RMC – Repeater Maintenance Console

The RMC is a software tool designed to support on-line communication with repeaters, simplifying their

installation and control. The tool is used primarily at commissioning of repeaters on site, but also as a tool

for on-line monitoring and trouble shooting of repeaters.

All repeater parameters can be displayed through a user-

friendly graphical interface and all settings in the repeater

can be made via the RMC. Dynamic information, such as

traffic utilization, input and output power levels are updated

continuously which makes the RMC an excellent help for

example at antenna installations and other adjustments in

the system.

The RMC communicates with one repeater at a time,

either via a RS232 interface directly into the repeater or via

remote access via modem. All repeater parameters can be

displayed and all settings in the repeater can be made via

the RMC. Dynamic information, such as traffic utilization, input and output power levels are updated

continuously which makes the RMC an excellent help for example at antenna installations and other

adjustments in the system.

User friendly Windows based interface

Provides an online status report of the repeater configurations

Excellent for troubleshooting applications

Configurations can be adjusted on a site-by-site basis.

Traffic monitoring via the RMC, the repeater firmware is automatically updated to the latest version in use.


AEM – Axell Element Manager

Central Management All repeaters in a network can be managed from a central location;

parameters can be read, alarms monitored and configuration changes made.

Network Optimization The AEM can be used as a tool for network optimization; repeater traffic reports are stored in a database

where they can be interrogated to optimize the network based on utilization statistics.

Excellent Overview The network elements can be presented either on geographical maps or in logical tree structures where the

relationship between network elements are made clear which can be a valuable tool when it comes to

network planning and troubleshooting

The AEM is a complete operations and maintenance software application designed to supervise and control

repeater networks. It is an advanced yet user-friendly application that gives easy access to all information

about a network. Each repeater or element can be monitored separately or the whole network can be

presented in one overview chart.

The network elements can be assigned to geographical maps to further enhance the overview of the

installation. A logical tree shows the relationship and hierarchical build-up between the network elements -

this includes both base stations and repeaters. Alarm sources indicate if faults have occurred in any of the

repeaters and an extensive reporting tool enable optimized planning of the network’s coverage.

A repeater can be fully monitored and controlled via the AEM. In the status

window parameters such as channel numbers, uplink and downlink peak

power, status of different repeater parameters, external alarms, etc. are

displayed.

Other windows display hardware configuration, alarm log, sent messages

log, traffic and heartbeat log.

A network is configured by adding repeaters to it, placing them on a

geographical or logical map and also placing them structurally in the system

and finally by configuring the AEM repeaters settings.

These settings are phone numbers, report intervals, etc. Base stations can

also be included in the network. They can be configured geographically and

structurally in the AEM, but need no other configuration.


RECENT PROJECTS

Some recent projects undertaken in the United States:

LA Metro

MWAA – Dulles Airport

WMATA – Buildings

BART

Baltimore Metro

MARTA

DART

US Military – ECM

Bank of America HQ

Indianapolis Airport

Atlanta Airport

Pittsburgh (SEPTA)

San Diego Trolley

Denver Metro

Seattle Sound

Lincoln Tunnel

Meadowlands

Bronx Justice Bld.

Irvine County CA

Pentagon


Contact Details

Axell Wireless USA 15950 North Dallas Parkway,

Suite 400 Dallas, Texas 75248

Telephone: (972) 361-8038 Fax: (972) 361-8005

[email protected] www.axellwireless.com


Winner of The Queen’s Award for Enterprise:

International Trade 2009

Axell Wireless U.S.A. 15950 North Dallas Parkway,

Suite 400, Dallas, Texas, 75248,

United States. Ph.: 972 361-8038 Fax: 972 361-8005

[email protected]

Axell Wireless U.K. (Head Office) Aerial House

Asheridge Road, Chesham, Buckinghamshire, HP5 2QD,

United Kingdom. Ph.: + 44 (0) 1494 777000 Fax: + 44 (0) 1494 777002

U.S. Active Equipment Catalog Issue 8, April 2011 • © Copyright Axell Wireless Limited • All rights reserved

u.s. catalog – active equipment - wireless system...

Documents