CATALOGUE

Kazakhstan,

JSC «NC«Kazakhstan

Engineering» 010000,

Nur-Sultan, 10 Kunaeva st.

Helpline: +7 (7172) 61 19 04

Reception of the CEO:

+ 7 (7172) 69 55 99 (ext. 1001)

Chancery: +7 (7172) 69 55 99

(ext. 1131, 1143, 1209)

Fax: +7 (7172) 61 19 27

e-mail: ke@ke.kz

www.ke.kz

JSC «NC «KAZAKHSTAN ENGINEERING»

CIVIL PRODUCTS

2

JSC «Petropavlovsk Plant of Heavy

Machine Building»

General information JSC «PZTM», located on the North of Kazakhstan in Petropavlovsk, is one of Kazakhstan's largest enterprises included in the JSC «National company «Kazakhstan engineering», for the production of equipment for oil and gas production, oil and gas, petrochemical, power and railway industries – such vector of development was defined in accordance with the concept of industrial development of the Republic.

Modern production technologies allow to produce a wide range of products in accordance with the standards of GOST, OST, ST RK, TEMA, ASME and API, taking into account the wishes of the customer.

The company consists of 6 production units, which involve about 1,500 units of equipment: metal-cutting, forging, casting, welding, thermal, woodworking, plastics and rubber processing, electroplating.

As a former enterprise of the military-industrial complex, the plant has retained the best traditions of the approach to the quality of products – for all its types there are General licenses, for control there are accredited testing, Central measuring laboratory, metrological service.

Since April 2003, the company has been certified by TÜV CERT for compliance with the international standard DIN EN ISO 9001 and subsequently the state standard ST RK ISO 9001.

Company address: 1, Ya. Gasheka, Petropavlovsk, 150009, North Kazakhstan region.

Contact phones: + 7(7152) 630300, 630336

Website: www.pztm.kz

Email address: pztm@pztm.kz

PAP 80/100 Lifting rig for well work over Purpose: PAP 80/100 lifting rig is designed for completion and repair of oil & gas wells Operations performed:

mobile moving from well to well;

assembly and disassembly of control head with the main and auxiliary hoist;

round trip with sucker rods, tubing and drill pipes;

mechanized spinning-up and uncoupling of tubing and drill pipes;

construction of cement bridging in holes through derrick manifold;

drilling-out of sand plugs and cement bridging with the help of mechanical or hydraulic drive rotary;

OIL AND GAS PRODUCTS:

TECHNICAL SPECIFICS

Hoisting Unit: Safe bearing load on the hook, kN (tf) 785 (80) Hydrosystem : With integrated oil tank heater Pumps 2 operating pressure range, (kgf/cm2) 160-200 Hanging jacks: hydraulic, double acting Pneumatic system: Powered by a chassis pneumatic system equipped with dehumidifier operating pressure (kgf/cm2) 7

Overall dimensions of the unit in transport position, mm - 14 000 х 2 800 х 4000 Weight in transport position, kg - 31 500

fishing and other works;

flushing-out of wells through the derrick manifold;

breakdown elimination;

milling of the metallic parts of drilling equipment fallen into the well;

well development after drilling completion.

TECHNICAL SPECIFICS

Safe bearing load on the hook, kN (tf) 1250 (125) Mounting chassis self-propelled off-road platform Diesel engine "Caterpillar" with spark arrester, (kW) 448 Conditional drilling depth, m (drill pipes, 30 kg/m) 2500 Hook speed, m/s from the main drive 0..1,59 Drill-pipe stand, m 18 - 20 Rig derrick two-section telescopic with open front face. Rig derrick height, m 36

Mobile drilling rigs with a lifting capacity of 100 to 160 tons

Purpose : Drilling of exploratory and production wells,

carrying out work over, including for drilling a second well in existing wells and other types of well construction work.

3

Design Features and Benefits: The drilling rig consists of separate blocks mounted

on semi-trailers that are transported using universal tractors, which ensures its mobility significantly reduces the time it takes to move from well to well.

The uptime resource is ensured by the use of the Caterpillar C-15, C-18 power engine, the transmission - Allison HD 47000FS and pneumatic couplings for switching on the “WPT” company drives/

The rig hydrosystem drive is arranged from the supplementary power take-off, which allows to perform mounting and dismounting at the well without connecting electric power and relieve the drive when doing roundtrip operations/

4

URAL-4320 KrAZ-65053 -length 10 600 10 850 -width 2 760 2 760 -height 4 260 4 350 Weight in transport position, kg 21 100 22 260 Full load: - on the front axle, kg

5 400

5 700 on the axis of the

rear bogie, kg 15 700 16 560

SPECIAL REPAIR TRUCK ASR Purpose:

- repair and preventive maintenance of ground equipment in oil fields, process pipelines, oil gathering stations, pumping units, as well as process equipment for water pipelines, sewers in municipal services of settlements.

TECHNICAL SPECIFICS Mounting chassis KAMAZ-43118 Dimensions, a maximum of, mm - length - 8 535 - width - 2540 - height - 3,770 Maximum weight, kg - 17 000

2-SECTION

HEAT EXCHANGER Purpose : Double shell-and-tube heat exchangers are designed for heating, cooling, condensation of liquid and gaseous media in the technological processes of the oil refining, chemical, petrochemical and gas industries.

TECHNICAL SPECIFICS

Case diameter, mm 450-1100 Pressure, kgf / cm 2 - от 50 Length of heat transfer pipes, mm 3000 - 6000 Range of heat transfer pipes, mm 19х2,11; 20х2; 25х2,5; 25х 2,77

Execution

From materials according to ASME

From materials according to GOST

Cover - low alloy steel SA 516 Gr 70

Cover - low alloy steel 16GS, 09G2S

Heat Exchanger Tubes - Carbon Steel to SA179

Heat exchange tubes - Steel 10, 20

Tube Gratings - Forged SA350 LF 2

Tube Gratings - Forging IV gr GOST8779 from steel 09G2S; steel sheet 16GS; 09G2S

TECHNICAL SPECIFICS Lifting Rig Safe bearing load on the hook, , kN (tf) 392 (40) Safe bearing load on the hook, , kN (tf) 490,5 (50) Hydro system : pump performance, 188 l/min Overall dimensions of the unit in transport position, mm

LIFTING RIG APRS-40 Purpose :

Repair of oil and gas wells. Operations Performed: installation of dismantling the wellhead equipment; - launching and lifting operations, including with sucker rods and pump-compressor-weed pipes; - mechanically unscrewing and unscrewing tubing strings - liquidation of accidents.

Purpose :

Sections for air-cooling units - horizontal or zigzag-type condensers and refrigerators are intended for condensation and cooling of vaporous, gaseous and liquid media with nominal pressure up to 6.3 MPa, in technological processes of oil refining, chemical, petrochemical, gas and related industries according to GOST standards and ASME, API.

TECHNICAL SPECIFICS Case diameter, mm - up to 2500 Volume, m3 - up to 30 Shell thickness, mm - up to 20 Case design - low alloy steel (09 G 2 C or 16 GS)

RESERVOIRS

Purpose : Capacities (low pressure vessels) are designed to collect and store various liquids in the technological processes of the oil refining, chemical and petrochemical industries

5

ENERGY-OIL AND GAS PRODUCTS :

AIR COOLING SECTIONS

2-SECTION HEAT EXCHANGER Purpose :

Tube bundles are designed for heating, cooling, condensation of liquid and gaseous media in the technological processes of oil refining, chemical, petrochemical and gas. They are made to GOST, ASME, TEMA standards.

Execution:

Pipes - Brass, carbon steel (steel 10-20), heat-resistant steel (15X5M), stainless steel (12X18H10T, 10X17H13M2T).

Tube gratings - bimetal (steel + brass), heat-resistant steel (15X5M), stainless steel (12X18H10T, 10X17H13M2T).

TECHNICAL SPECIFICS Case diameter, mm - 325-1400 Pressure, kgf / cm2 - up to 100 The length of the heat transfer pipes, mm - 3000-12000 Diameter of heat exchange tubes, mm - 20; 25 Heat transfer surface, m2 - 9.4-2000

TECHNICAL SPECIFICS Pressure conditional, kgf / cm2 - 6 (16), 25 and 64 Temperature, С - from -40 to + 475 Coefficient of ribbing - 9; 14.6; 20 The number of rows of pipes - 4, 6, 8 The number of moves to the pipes - 1, 2, 4.8 Pipe length, m - 6 and 8 The surface of the heat exchange finned tubes, m2- from 300 to 1650 Pipe material - Steel 20, 15X5M, 12X18H10T, 10X17H13M2T, Brass LOMSH 70-1-0,05 Material storage - AD1M Weight, t - from 1.5 to 6

Purpose : Air and gas coolers are designed to cool the rotating elements of generators and turbines. They are made in accordance with the technical regulation of the Republic of Kazakhstan “Requirements for the safety of equipment operating under pressure”, “Requirements for the design and safe operation of vessels operating by suppression” of the Republic of Kazakhstan dated October 29, 2008 and design documentation.

TECHNICAL SPECIFICS

TECHNICAL SPECIFICS Working pressure, kgf / cm - 2 over 0.7 Sizes of pipes, mm - Ø28x3,0; Ø32x3.0; Ø38x3,0 Weight, t - up to 20.0 Material execution: Coil pipes - steel 12X1MF Collectors - pipe steel 20

GAS-TIGHT BOILERS

HEATING PANELS

Pipe material - carbon, alloy, high alloy chrome and nickel austenitic steel Type of pipe - smooth, fin Diameter of pipes, mm - from 16 to 89 Temperature, С - up to 600 Pressure, MPa - up to 50 The mass of blocks, kg - up to 20 000

They are used for transferring coolant in energy-technology boilers, steam superheaters, economizers, waste-heat boilers, etc. Technical requirements for the design and manufacture according to the technical regulation «Safety requirements for steam and hot-water boilers»

STEAM HEATER PACKAGES The superheater package is designed to remove heat in the boiler. They are made in accordance with the technical regulation of the Republic of Kazakhstan “Requirements for the safety of hot water and steam boilers” (Government Decree dated December 15, 2009 No. 2126), “Industrial safety requirements for the design and safe operation of steam and hot water boilers (Order No. 172 of September 18, 2008) and design documentation.

6

GAS AND AIR COOLERS

AIR HEATERS Purpose :

Air heaters are designed to heat the air before being fed into the boiler furnace.

Are made in accordance with OST 108.030.45-82

ENERGY-OIL AND GAS PRODUCTS :

TECHNICAL SPECIFICS Working pressure, kgf / cm2 - up to 0.6

Pipe dimensions, mm - Ø40x1.5; Ø40x1.6; Ø40x2.0; Ø40x3.0; Ø51x1.5

Weight, t - up to 90

MATERIAL EXECUTION:

Pipes - steel longitudinal electric welded (steel 10 or vst2)

Pipe boards - carbon-grade structural steel, steel of ordinary quality, high-alloy corrosion-resistant and heat-resistant steels.

Metal structures - carbon structural high-quality steel, steel of ordinary quality.

TECHNICAL SPECIFICS Pressure conditional, kgf / cm2 - up to 63 Temperature, оС - from - 40 to + 450 Pipe length, m - up to 12 Weight, t - up to 10 Material performance: Pipes - steel 20, brass, copper Finning - Aluminium Chambers, sides - carbon-grade structural steel, steel of ordinary quality.

7

JSC “ZAVOD S.M.

KIROVA »

General information about activities The company was established in 1928 in Moscow

with specialization in the production of radio equipment.

In 1941 it was evacuated to the city of Petropavlovsk.

Currently, the plant specializes in the production and modernization of modern means of communication,

automation equipment, telemechanics and railway transportation safety systems, automation and control systems for

the oil and gas and energy complexes.

The team of JSC “ZAVOD S.M. Kirova” is a highly qualified specialists with extensive experience in the development,

design of products, quality control, testing, etc. The company has patents for utility models and industrial designs.

On an area of more than 7.5 hectares, production facilities are located in which all types of engineering

redistribution, galvanic coating, soldering of surface-mounted elements

on printed circuit boards on surface-mounted lines, assembly, adjustment and acceptance tests of radio engineering

and power equipment.

Company address: Petropavlovsk, st. Partizanskaya, 48

Contact phones: +7 (7152) 533 - 469

Fax: +7 (7152) 533 - 489

Website: www.zik.kz

Email address: zik@zik.kz

8

INTEGRATED LOCOMOTIVE

SAFETY DEVICE ILS-D

PURPOSE:

Ensuring the safety of the movement of self-propelled track-type vehicles of category I on sections of railways with autonomous electric traction of direct and alternating current equipped with track systems will arrange for you automatic locomotive signaling (ALSN).

TECHNICAL SPECIFICATIONS

- powered by 24 V DC on-board network; - power consumption no more than 80 W; - range of operating temperatures from -40 ° to +50 ° C.

TECHNICAL SPECIFICATIONS Microprocessor adaptive protection device UZD-11 motor is designed for integrated protection of three-phase asynchronous electric motors. Protection is carried out by emergency shutdown or prevention of engine start in case of detection of its malfunction. The device continuously monitors the power supply and motor current. Additionally, the device can control the heating of the engine, the ingress of water into the oil sump of a pump or other device driven by an electric motor, and process external discrete alarm signals. The device generates a preliminary command to prohibit switching on the load in case of reduced insulation resistance of the windings or motor power cable.

TECHNICAL SPECIFICATIONS

RAILWAY PRODUCTS:

RADIO STATION UNIVERSAL - RVS-1 KZ

PURPOSE: The RVS-1 radio station is designed to work in the networks of train (PRS), repair and operational (RORS-L) and station (SRS) radio communications in railway transport as a locomotive or stationary radio station of KB and VHF bands.

ADAPTIVE MOTOR PROTECTION

DEVICE

Nomination Range sq. VHF range

Working range, MHz 2,130 and 2,150 151,725 -156,0

Frequency grid step, kHz

20 25

Transmitter power, W 12+2 9+1

Receiver sensitivity, microvolt

5 0,5

Number of control panels

2

Dimensions of the radio equipment block, mm

240x205x130

Warranty period, service life before

decommissioning

5 years, 12 years

Purpose:

The device is designed to protect the stator windings of electric motors (ED), working with starters 0-6 magnitude and the indication of the causes of the accident when emergency conditions occur.

TECHNICAL SPECIFICATIONS Supply voltage, V - from 176 to 242 Frequency of the power supply network, Hz - 50 Power consumption, VA, no more than –30 Response time, s: - at 25% overload on the motor shaft, not more than 20 - at break of a phase, no more than 2 The mass of the device without packaging, kg, no more than 1,5 Overall dimensions, mm, no more - 186 × 160 × 87

The range of operating temperatures, ° C - from -35 to +65

Relative humidity at temperatures up to

+ 25 ° C, not more than (95 ± 3)%

TECHNICAL SPECIFICATIONS Electric motor start-up mode - manual / automatic tical Power of the electric motor controlled by the unit, kW, - from 7.5 to 55 Motor start delay time, s - from 10 to 99 Discretization of installation of a delay time of autostart, with - 1 The number of automatic starts provided by the unit, with an inefficient start of the electric motor - 2 The time of trouble-free operation of the electric motor to reset the start sequence number, s - at least 30

OIL AND GAS PRODUCTS:

DEVICE OF PROTECTION OF ELECTRIC MOTORS – UZED-1

CONTROL BLOCK

OIL ROOMERS BU ШК-2М

Purpose: Block control BU SHK-2M, BU ShK-2M.1 (hereinafter referred to as the block) and its modifications are designed to control the operation of an asynchronous electric motor, protect it from overloads and phase failure on the low and high sides of the supply transformer in AC networks with a frequency of 50 Hz and voltage 380 / 6000 (10000) V, as well as checking the uniformity of the load of the electric motor in time. In the modifications of the БУ ШК-2М.1 block, the function of program control of the electric motor operation in the cyclic Work-Pause mode is implemented.

LINE FOR PRODUCTION OF MULTILAYERED PRINTED CIRCUIT BOARDS AND CIRCUIT BOARDS Line for the production of printed circuit boards 5 - accuracy class The production line allows the production of double-sided printed circuit accuracy class 5 in accordance with GOST 23751-86 (IPS-A-600 with a design 0.25 mm). A subtractive chemical method for the production of printed boards is used. Maximum features of our production line: - single-sided and double-sided printed circuit boards up to and including accuracy class 5; - minimum hole diameter - 0.3 mm; - maximum size - 305 * 457 mm; - protective coating - protective belt mask; - coating - POS61; - control the thickness of metallization in the holes; - printing - silk-screen printing, the line thickness is not less than 0.32 mm.

9

10

«MUNAYMASH» JSC

Munaymash JSC is one of the oldest enterprises in Northern Kazakhstan, formed on the basis of the Krasny Gidropress plant, evacuated in November 1941 from the city of Taganrog.

General information The main activity of the company is aimed at the

production of equipment for the oil and gas complex. The company specializes in the production of: - borehole sucker rod pumps with a nominal diameter

of 32 to 95 according to GOST R 51896, API 11 ax spec, as well as accessories for them;

- auxiliary equipment for the operation and maintenance of wells (packers, anchors, filters, etc.)

- sucker rods and couplings to them (including sprayed with carbide powder),

- hinged keys and tong dies to them, - technological equipment for the protection and

flushing of wells from mechanical impurities (paraffin), - vibration dampers designed to damp vertical vibrations

between the car body and carriage, as well as spare parts and various components.

MAJOR CONSUMERS of JSC NC «Kazmunaygas», (JSC «Ozenmunaygas», JSC «Mangistaumunaigas», JSC «Embamunaigas»), and other oil producing companies of the Republic of Kazakhstan and the Russian Federation.

Company address: 264 Auezov str.,

Petropavlovsk, 150004, Kazakhstan

Contact phones: 8 (7152) 46-72-77

Website: www.aomm.kz

Email address: mmoffice2007@aomm.kz

11

The company has modern high-tech equipment. Including a number of technologies unique to the Republic of Kazakhstan: equipment for boring and honing long cylinders up to 6 meters; equipment for spraying and reflowing carbide powders and subsequent grinding; equipment for ion-vacuum nitriding of parts up to 6 meters long. Gas-flame spraying The process of gas-flame spraying with powder materials is intended to protect the surfaces of parts from corrosion, to create a wear-resistant surface layer

TECHNOLOGICAL OPPORTUNITIES OF THE FACTORY

Boring and honing of cylinders up to 6 meters long, diameters from 29 to 100 mm, accuracy of diameters up to 0.03 mm, deviation from straightness of the channel axis 0.1 at a base length of 1000 mm, surface roughness Ra0.08

The technology of ion-vacuum nitriding of channels of long cylinders in a glow discharge is a promising modern method of surface hardening of parts. Workpiece length up to 6 m

As part of the «Productivity 2020» program, 13 units of modern CNC machines were purchased, manufactured in Brazil, the USA, and Japan. Turning, milling machining centers.

12

«TYNYS» JSC

The construction of the plant was provided by the Decree of the Council of Ministers of the USSR of February 11, 1953

General information about the activity The main activity of the company:

• Production of components and assemblies for aircraft (heat-exchange equipment, aircraft fire extinguishers, temperature detectors, valves, electromagnetic switches, signaling devices of various types, thermorelay, electronic control units).

• The main consumers of aviation products are aircraft construction and aircraft repair enterprises of the Russian Federation, Ukraine, Belarus and Uzbekistan. The share of export of aviation products in the total volume of production is more than 50%.

• Industrial goods for various sectors of the economy (fire extinguishing equipment, medical oxygen-breathing apparatus, polyethylene pipes, contact network parts for electrification of railways and control and measuring equipment, electrical products, geotextiles, casting using gasified models).

Address: Republic of Kazakhstan, Kokshetau, st. World 13

Phone: +7 7162 76 30 04

E-mail: tynys@mail.ru

Website: http://tynys.kz

13

POLYETHYLENE PIPES WITH DIAMETER FROM 10 TO 1000 MM.

PIPES IN BAYS

Pressure pipes from PND polyethylene (GOST 18599-2001)

Purpose:

- Pressure pipes made of low pressure polyethylene are intended for pipelines transporting water (including household and drinking water supply) and other liquid and gaseous substances, to which polyethylene is chemically resistant.

- Pipes are made with low pressure polyethylene by continuous screw extrusion.

Purpose: The production of nonwoven materials implies the production of textiles made from natural and chemical fibers or threads, interconnected without the use of a loom. The proposed production line is aimed at production

TECHNICAL SPECIFICATION Pipe Operation Temperature low-pressure polyethylene (+60С) - (-50С); Pipe color - black and uniform Outside diameter of the pipes - from 10 to 1000 mm. Straight pipes (from 6 to 12 m as agreed with the consumer), are bundled. Pipes with a diameter of not more than 110 mm are made in bays from 100 to 2000m.

Name and article of a cloth

Over. density, g /

sq. m

Breaking load (in length and width)

kN/m, not less

Elongation at break,%

Max. width m

KDA Geotextile

- 100 100

by length - 4,17 by length - 78 3,5

in width - 3,22 in width - 74,1

KDA Geotextile

- 200 200

by length - 4,17 by length - 58,4 3,5

in width - 3,22 in width – 66

KDA Geotextile

- 300 300

by length - 10,0 by length - 48,1 3,5

in width - 9,28 in width - 58,8

KDA Geotextile

- 400 400

by length - 18,65 by length - 44,3 3,5

in width - 15,98 in width - 65,5

KDA Geotextile

- 500 500

by length - 17,16 by length - 60,0 3,5

in width - 17,15 in width - 61,6

GEOTEXTILES WITH DENSITY FROM 100 TO 500 G / M2. Nonwoven geotextile cloth

Nonwovens materials

Name and article of a cloth

Over. density, g /

sq. m

Tension

electrostatic field, kV / m, no more

The content of free formaldehyde, m / kg, no more

Max. width m

КДА НМ 100-150 3,2 121 3,5

products for use in insulating, medical, hygienic, domestic purposes, industrial construction. Needle-punched technology allows the production of non-woven materials with high productivity and a reduced number of technological transitions, a significant advantage of which is the manufacture in a short production cycle of a wide range of materials with a diverse range of consumer properties. Needle-punched non-woven materials have a uniform structure that allows predicting their operational properties with sufficient accuracy.

PIPES IN CUTS

14

GAS-CONTROLLED GAS FITTINGS FOR ENHANCED SAFETY

Purpose: High safety shut-off and control gas fittings are used in individual gas

cylinder installations and are intended for filling cylinders, storing and selecting gases during operation with liquefied gases with a pressure of up to 1.6 MPa.

Gasified casting allows castings weighing up to 50 kg with a surface finish of Rz40, with weight and dimensional accuracy up to class 7 according to GOST 26645-85. Product dimensions 500 x 500 mm. Main advantages: increase in metal utilization up to 90%; reduction of consumption for auxiliary materials up to 90%;

- reduction in the number of technological operations; - reduction of the machining volume

castings 40%; - surface roughness up to 20 microns.

CASTING ON GASIFIED MODELS FROM BLACK AND NON-FERROUS METALS.

CASTING

ON GASIFIED MODELS FROM BLACK AND NON-FERROUS METALS.

HEAT METER SWTU-1

DIAMETER 80 MM PN 16 (GAS-WATER)

LATCH WEDGE FRICTIONAL

FLANGE FOR CARGO

RAILWAY WAGONS

FIRE FIGHTING MEANS

Portable powder fire extinguishers - injection type are designed to extinguish ignitions of solid, liquid and gaseous substances, as well as electrical equipment, which is energized up to 1000 V.

Portable carbon dioxide fire extinguishers - designed to extinguish small initial foci of ignition of various substances and materials, as well as electrical equipment under voltage up to 1000 V.

Fire extinguisher water backpack OVR-18 - (hereinafter referred to as a fire extinguisher) - is designed to extinguish the lower foci of fires in forests, steppes and bread masses, as well as for chemical treatment of plants with pesticides in the form of aqueous solutions and emulsions.

MANOMETERS

Counter of high-speed wing-type hot water SKV-3/15 (90) or cold water SKV-3/15 (40), vacuum manometers showing DA3-U and DA4-U, vacuum gauges showing DV3-U and DV4-U, pressure gauges showing DM3 -U and DM4-U

Heat meters are designed for:

- measuring the released or consumed amount of heat, the volume of the coolant, the temperature of the coolant in the supply and return pipes, the overpressure of the coolant or water, the operating time (voltage in the power supply and correct operation) or downtime (lack of voltage in the power supply), as well as calculating the mass (mass flow) of the coolant - performance 2, 4-12;

- measuring the volume of cold or hot water, its temperature, running hours or downtime, as well as calculating the mass (mass flow) of water;

- indication (depending on the version) of the above measured and calculated physical quantities, as well as thermal power, volumetric flow rate of the coolant or volumetric flow rate of the water, overpressure of the coolant or water, current time and date on the indicator;

- generating potential output signals at two independent analog outputs (with an integrated MDM / REG unit) proportional to the informative parameters measured by the meter — temperature, pressure, volumetric flow rate and thermal power.

Counters can be operated under the following conditions:

atmospheric pressure from 84.0 to 106.7 kPa;

relative humidity - not more than 95%;

voltage from 187 to 242 V, frequency

(50 ± 1) Hz;

or voltage (36 ± 5.4) V, frequency (50 ± 1) Hz;

or voltage (24 ± 3.6) V, frequency (50 ± 1) Hz.

Remote data transfer capability

15

«KAMAZ-ENGINEERING» JSC

General information

KAMAZ-Engineering JSC is the largest Kazakh-Russian joint venture in the city of Kokshetau for the assembly of trucks, dump trucks and special equipment on the KAMAZ chassis. The plant was founded on June 2, 2005 and during the first days of its existence, the first dump trucks and shift buses were released from the conveyor, after which mass production was started. Cars are made exclusively for the needs of consumers of the Republic of Kazakhstan. Throughout the time, the company strives to expand its lineup. At the moment, KAMAZ-Engineering is one of the most technically equipped manufacturing plants in the Republic of Kazakhstan.

The production capacities of the enterprise amount to 2200 units a year and provide a closed cycle for manufacturing products and their technological support:

1. The main production building with specialized sections by type of work: • MECHANICAL AREA • ACCUMULATORY AREA • TIRES • POLYAMIDE PIPELINES • LAND OF PAINT 2. Joiner's shop 3. Administrative building 4. Open storage areas 5. Freestanding storage facilities

Company address: 13, Mira, Kokshetau

Contact phones: 8 (7162) 32-62-08

Website: kamaztrade.kz

Email address: kokshekamaz@mail.ru

16

DUMP TRUCK

65115-015-15 (15Т) 6520-041 (20Т)

LONG-HAUL TRUCK

54115-010-15

AGRICULTURAL TRUCKS

45142-010-15 (14Т) 45143-012-15 (11Т)

STAKE-BED TRUCK

53215-052-15 (11Т)

AUTOMOTIVE VEHICLES

SPECIAL MACHINERY

17

«EUROCOPTER KAZAKHSTAN

ENGINEERING» LLP

General information about the activity

Company Address:

Kazakhstan, Astana, Bypass road No. 229

Contact phone numbers:

+ 7 ( 7 1 7 2 ) 2 7 2 5 9 0

Website : www.eurocopterke.kz

Email Address : info@eurocopterke.kz

Eurocopter Kazakhstan Engineering LLP (hereinafter referred to as ESKE) is a joint venture established in April 2011. The helicopter assembly project in the Republic of Kazakhstan is implemented on a parity basis: 50% of JSC NC Kazakhstan Engineering and 50% of Airbus Helicopters. The aim of the project is to create a modern high-tech helicopter ecosystem. ESKE is engaged in the sale of helicopters, assembly and maintenance of the helicopter EC145. Using the latest multimedia tools, flight simulator, engine layouts and technical

ESKE produces technical documentation by training technicians and pilots in Russian and English in the CIS and Central Asia.

Helicopter H125 (AS350B3e)

MISSION Н125: • Law Enforcement • Aerial work • Firefighting • Search and Rescue • Emergency medical care • Passenger transportation

TECHNICAL SPECIFICATIONS:

2 250

1 400 кг. 426 кг.

• Passenger capacity. • 1 pilot + up to 6 passengers. • Weight: • Maximum takeoff • Weight: kg • Maximum mass of cargo: • on external suspension: • Tank capacity: • Engine: • 1 Turbo engine TURBOMECA ARRIEL

2D. • Take-off power: 632 кВт. • Flight performance: • Maximum speed: 287 km.h. • Cruising speed: 258 km.h. • Range with standard

fuel tank: 631 км. • Operational restrictions

• Max Height: 7 010 м. • Min / Max temperature: 40°C / + 50°C.

18

Helicoter H130 (EC130T2)

MISSION Н130:

• Business and private aviation

• Tourist flights

• Emergency medical care

• Law enforcement

• Aerial work

TECHNICAL SPECIFICATIONS: • Passenger capacity : 1 pilot +

up to 6 passengers. • Weight :

• Maximum take-off weight: 2 500 kg • Maximum mass of the load on the

external suspension: 1 500 кg

426 кг.

• Tank capacity:

• Engine:

• 1 Turbo engine TURBOMECA ARRIEL 2D.

• Takeoff power: 710 kW.

• Flight performance:

• Maximum speed: 287 km.h.

• Cruising speed: 236 km.h

• Range with standard

• fuel tank: 617 km.

• Operational restrictions:

• Max Height:

• Min / Max temperature:

7 010 м. - 40°C / + 50°C.

Helicopter EC145

MISSION Н125:

• Law Enforcement

• Aerial work • Firefighting • Search and Rescue • Emergency medical care • Passenger transportation

TECHNICAL SPECIFICATIONS:

• Passenger: 1 pilot + up to 9

passengers

1 500 кг. 694 кg.

• Weight:

• Maximum takeoff weight: 3,558 kg.

• Maximum mass of cargo:

• on external suspension:

• Tank capacity:

•2 turboshaft engines TURBOMECA ARRIEL 1E2

• Takeoff power: 2 x 550 kW. • Flight performance: • Maximum speed: 278 km/h.

• Cruising speed: 256 km/h. • Range with standard • fuel tank: 816 км. • Operational restrictions: • Practical ceiling: 5,485 m.

• Min / Max temperature: - 45 ° C / + 45 ° C.

19

"Scientific Research Institute "Gidropribor" JSC

Company Address: Republic of Kazakhstan, 090000, c. Uralsk, st. March 8, 109 Contact phone numbers: +7 (7112) 51 38 11 Website: www.gidropribor.kz Email Address: office@gidropribor.kz

General information about the activity "Scientific Research Institute "Gidropribor" JSC was created in Uralsk in 1972 on the basis of the Design Bureau of Engineering Plant named after K.E. Voroshilov, as a branch of the Leningrad Central Research Institute "Gidropribor" for research, development and production of underwater robotics for emergency and rescue and special underwater operations. Currently, the institute is a part of JSC "NK" Kazakhstan Engineering "and specializes in research, design, single, small-scale production and engineering in the following areas: - sea and river boats and other boats; - mobile robotic systems for ground use; - mobile robotic systems for air applications - unmanned aerial vehicles; - mobile robotic complexes of underwater use - uninhabited underwater vehicles; - apparatus and equipment for servicing underwater and onshore oil and gas pipelines; - renewable energy sources - combined wind and solar installations.

The company includes: • design and research units; • laboratory test complex; • pilot production; • quality control service; • service of scientific and technical information and standardization; • service services.

SPEED PATROL BOAT “SHAGALA”

HIGH SPEED BOAT “SAGYM”

SPECIFICATIONS

Length – 17.0 m. Power – 2 х 600 h.p. Width – 4.0 m. Displacement – 25.2 t. Midship height – 1.76 m. Crew – 2 p. Draft – 0.76 m. Special staff - up to 30 p. Speed – 25.8 k. Seaworthiness – 3 b.

SPECIFICATIONS

Length – 11.3 m. Width – 2.5 m. Board height – 1.7 m. Draft – 0.7 m. Displacement – 25.2 t. Engine power 1х956 (1х1300) kw (h.p.). Maximum speed – 60.0 k. Autonomy in fresh water reserves is 24 hours. Economy range - 200 miles.

SPECIFICATIONS

Length – 22.0 m. Width – 8.0 m. Midship height – 3.05 m. Draft – 1.8 m. Speed – 25.8 k. Displacement – 25.2 t. Crew – 2 p. Autonomy - 5 days

Appointment: The ship is designed to transport organized groups of people and small consignments in the northern part of the Caspian Sea, as well as rivers and lakes. It can be used for patrol and inspection activities.

Appointment: The high-speed boat is designed to provide the following tasks: pursuit and interception of high-speed targets; coastal protection and rescue operations. Area of exploitation: inland waters, coastal areas of the Caspian Sea, with a distance from shelters - 20 miles.

Appointment: An icebreaking and towing boat is designed for icebreaking and towing operations in shallow and clogged fairways on rivers, lakes and reservoirs, and the coastal zone of the seas.27

ICE-TOWING BOAT “KAZHYMUKAN”

20

БУЙ МОРСКОЙ МАЛЫЙ ЛЕДОВЫЙ

SPECIFICATIONS Setting depth (recommended) – 5…20 m. Overall buoy length – 6.32±0.02 m. Height of fire during draft – 1.5 m. Draft (maximum) – 2.9 m. Buoy Hull Diameter - 0,775±0,005 m. Mass buoy without equipment and anchor device - 800±30 Weight of the anchor - 1350±100 kilogram Anchor Gauge – 19 mm. Permissible ice thickness - 0,5 m. Service life – 5 years

SPECIFICATIONS

Setting depth (recommended) – 7…20 m. Overall buoy length – 5.7±0.02 m. Height above sea level – 3.2 m. Draft (maximum) – 2.5 m. Buoy Hull Diameter - 0,97±0,005 m. Mass buoy without equipment and anchor device - 385±20 Weight of the anchor - 680±50 Anchor Gauge – 19 mm. Service life – 5 years

BUOY MARINE SMALL ICE

Appointment: Milestones are non-luminous floating signs and are equipped with a passive radar reflector, a top figure and a number plate. Unsinkability is ensured by the presence of waterproof bulkheads in the hull. The operational period is summer navigation. Application area: MM (marine milestone) is intended for fencing of navigable shipping channels, fairways, individual navigational hazards in open areas of the sea.

Appointment: conducting diving descents and underwater technical operations at depths of up to 60 meters in the conditions of an unequipped coast, from mooring walls, from boats using various types of diving equipment used in stand-alone modes, in the temperature of water from + 2 ° С to + 30 ° С air from – 30 ° С to + 40 ° С; air-oxygen recompression in a pressure chamber in the treatment of specific diving diseases: repair work of the underwater hulls of ships, ships and engineering structures.

Appointment: Small buoy marine ice luminous, designed to enclose sea channels, fairways, recommended courses, as well as individual navigational hazards at sea during the day and night. Year-round operation, including in ice conditions. In ice conditions, when the ice field moves, the buoy goes under the ice and leaves the ice in the recess.

BUOY MARINE

MOBILE RECOMPRESSION DIVING STATION

21

22

JSC «Machine Building Plant

S.M. KIROV»

General information about the activity

Company address: Almaty.

Contact phones: +7 (727) 278 21 20

Website: www.mzk.kz

Email address: kirov_plant@mail.ru

JSC «Machine Building Plant S.M. KIROV» is a large machine-building plant in Almaty. Built in 1942 on the basis of the evacuated from Makhachkly factory number 182 (now the factory "Dagdiesel"), shortly before that combined with the Tokmak plant named after S. M. Kirov. In Soviet times, he was one of the leading diesel and torpedo building plants of the USSR. It is currently part of the «national company «Kazakhstan Engineering», established in 2003. Is the only manufacturer of torpedoes with thermal propulsion systems in the CIS, produced, in particular, 650-mm torpedoes of types 65-72 and 65-76. In cooperation with a number of enterprises of the former USSR, such as the Central Research Institute "Gidropribor", NPO "Region", Central Research Institute "Morteplotekhnika", Central Scientific Research Institute named after Krylova, mastered the production of marine torpedoes of 20 types and modifications. There is also a release of marine hydraulic equipment and equipment for the oil and gas and mining industries, casting.

23

• Flow limiter

• Locking spools

• Blocking valves

• Hydraulic locks

• Manual directional control valves

• Electromagnetic control valves

• Hydraulic cylinders

• Spools

• Valve switches

• Valve Boxes

• Hydraulic machine

• Overflow spool valves

• Diaphragm pneumatic accumulators

• Pneumatic accumulators

• Lifts

• Central lubrication device

MARINE PRODUCTS HYDRAULIC

Purpose: Marine hydraulics products are designed for steering machines of modern ships. Marine hydraulics allows the rudder to be moved at full speed from side 35 to side 30. At the same time, on ships with a capacity of more than 100 tons, the hydraulic steering machine must have two pairs of cylinders, and on other vessels one pair is allowed.

The advantages of hydraulic steering machines in high efficiency and the possibility of obtaining large torques. In addition, the timing is durable and allows you to quickly and silently change the speed of the vessel.

24

JSC "811 REPAIR PLANT KE"

General information about the activity

Over the period of 40 years of operation, JSC “811 Repair Plant KE” has accumulated extensive experience in the field of repair and conversion of equipment. The plant's products have earned a good reputation.

There are all necessary licenses and certificates for the organization of production. The quality management system ISO 9001: 2009 has been introduced and is functioning. The main types of products:

- overhaul, modernization, re-equipment and maintenance of freight vehicles of all modifications; - overhaul of KAMAZ-740/3, 740; YaMZ-236, YaMZ-238; - overhaul of components and assemblies of trucks; - re-equipment of automotive vehicles in the fire; - production and overhaul of fire engines based on the URAL, KRAZ, ZIL and GAS chassis; - overhaul and modernization of tracked lightly armored vehicles (MTLB); - overhaul and modernization of armored vehicles BTR, BRDM; - manufacture of asphalt shoes for T-72, BMP-2, MTLB, T-90; - conversion of the T-72 into a caterpillar fire engine.

Company address: Yereymentau

Contact phone numbers: +7 (7163) 32 50 01

Website: www.811.kz

Email: 811_kz@mail.ru

25

URAL PLANT "ZENIT"

JSC

General information

Company address: 090000 Republic of Kazakhstan,

Uralsk ci ty, Saraishyk street , 28

Contact phones: (711-2) 51-40-06-40-06

Website: www.zenit.kz

Email:zenit@zenit.kz

about the activity The foundation of the plant was laid in 1921 in

Leningrad, in 1941 the plant was evacuated to Uralsk.

URAL PLANT "ZENIT" JSC– an enterprise of engineering profile,possessing all types of production, from procurement to assembly of products, both machine-building and ship-building. The technological park includes more than 1000 units of technological equipment that meets the universal profile of the enterprise and allows for the following types of production: ship; locksmith- assembly; welding; machining; electrical installation; foundry; paint; plastic and rubber; heat treatment; galvanic processing, etc.

26

UNIVERSAL

SPECIFICATIONS The greatest length, m - about 51 The largest width on the deck, m - about 9.5 Full displacement, - about 720 Draft, m - not more than 2.8 Beaufort, knots (specified on the head), knots about 12

Cruising range by economic course, miles - about 1200

Ship autonomy, day: by stocks of provisions

about 20 fresh water reserves

about 10 in terms of fresh water reserves (with replenishment of fresh water reserves from desalination plant) about 20

MULTI-FUNCTIONAL SUPPORT

VESSEL «BULAN»

Appointment:

Designed to provide ships and boats at sea with fuels and lubricants, water and food; assistance in the elimination of fires on ships, boats and ships, etc.

MANUFACTURE OF METAL STRUCTURES BY THE DRAWINGS OF THE CUSTOMER FOR THE CONSTRUCTION OF BUILDINGS AND CONSTRUCTIONS

27

SPECIFICATIONS Tank dimensions 25 m3: diameter 2.8 m; length 4.3 m; height (with hatch) 3.1 m; weight 2.4 t; vessel wall thickness 4 mm. Tank dimensions 50 m 3: д diameter 2,8 m; length 9.05 m; height (with hatch) 3.1 m; weight 4.4 t; vessel wall thickness 5 mm.

Appointment: Tanks made of structural steel - Art. 3

Designed for storing dark and light oil products with a density of up to 1.0 t / m2 with an internal overpressure in the gas space of 0.04 MPa and 0.07 MPa or a vacuum of 0.001 MPa, depending on customer requirements.

CAPACITY (RESERVOIR)

EXECUTION OF ORDERS FOR OIL AND GAS AND OTHER INDUSTRIES

Wheel Running wheel Rubber-technical products

Gear manufacturing: spur and helical gears from m = 0.3 to m = 8.0 with an outer diameter of up to 500 mm and a

cut width of 100 mm; bevel gears from m = 1.5 to m = 4.0; cutting tool for cutting worm pairs from m = 0.3 to m = 8.0 with an outer diameter of up to 500 mm and slotted pairs with involute engagement and a profile angle of 30 degrees. Production of cutting tools for metalworking, mounting and special in metric and inch

execution, including shock keys.. Production of sealing elements of metal, graphite, fluoroplastic and caprolon, rubber, rubber

(cuffs, membranes, gaskets, etc. with a diameter of up to 770 mm) and plastic (up to 300 cubic centimeters) in accordance with the requirements stipulated by ANSI / API standards and GOST.

28

General information about the activity Production of tracked conveyor - tractors and spare parts for them.

• Production of spare parts for rolling stock. • Production of rigging kits for armored vehicles • Manufacturing of trailers, dump trucks, tractors,

trailers. • Production of asphalt shoes. • Tarpaulin canopy. • Engines for special machinery. • Overhaul of engineering equipmen t

Main characteristics

• Total plot area: 11.5918 ha. • Production area: 3 354 m2 • Number: 173 people, including AUP: 35 people.

Company address: Semey city, Glinka St., 73 g Contact phones: 8 (7222) 36-13-38 Websitesemmashzavod.ru Email:semmashzavod@mail.ru

«Semipalatinsk Machine-Building Plant» JSC

«Semipalatinsk Machine-Building Plant» JSC was founded in 1969 as a branch of the Rubtsovsky Machine-Building Plant (RMZ) in accordance with the order of the USSR Ministry of Defense Industry.

29

MAZ-6501B9-470

MAZ-837300-3010

SPECIFICATIONS

SPECIFICATIONS Engine model - YaMZ-651.10 Gearbox, number of gears - JS200TA (12) Fuel tank capacity, in liters – 300 Engine power, kW / hp. - 302 (412) Tires - 12.00R20 or 315 / 80r22.5 Cabin Type - Small Unloading type - 3-sided unloading Maximum speed, km / h - 85 DISTRIBUTION OF MASS AND LOAD Technically permissible gross vehicle weight, kg - 33500 Front axle load, kg - 7500 Technically permissible load capacity, kg - 20300

SPECIFICATIONS

Appointment: : Dump truck with rear unloading,

Appointment : Designed for transportation of various

cargoes as part of a road train

Suspension - spring Platform and body with steel sides, with awning, with rear Number of axles / wheels - 2/4 + 1 ABS – installed Tires - 235/75R17,5 DISTRIBUTION OF MASS AND LOADS Permissible weight per front axle, kg - 4000 Gross weight, kg - 8000 Permissible weight per rear first axle, kg - 4000

TRACK TECHNOLOGY:

Payload: 2, 5 (4) tons Weight: 8200 (9000) kg) Engine, power: 238M2 YaMZ , 240 l.s. Ground pressure (with load): 0.26 (0.23) kgf / sq. M. Overall dimensions, mm. Length: 6340 (7 345) Width: 3,140. Height: 2 185.

TRACK TRANSPORTER

Appointment: Tractor GT-T

GT-T crawler transporter-tractor is a high-speed floating vehicle with high cross-country ability with bearing housing and front drive wheels.

The GT-T caterpillar conveyor tractor is intended for the transportation of people and various goods on impassable roads in snowy virgin lands and wooded areas in the regions of the Arctic and the Far North with the simultaneous towing of special wheel-ski trailers or other systems with a total weight of up to 5 tons.

FREIGHT CAR EQUIPMENT:

it is intended for transportation of various bulk goods

TRAILING EQUIPMENT:

30

Purpose : • figured cutting of sheet metal

• production of advertising and demonstration equipment

• manufacturing of sheet metal structures (doors, equipment parts)

• manufacturing parts of attachments for agricultural machinery

• production of elements of power building structures

• manufacture of decorative metal products

Purpose:

The semi-trailer MAZ-997700 is a heavy truck designed for transportation of road and construction equipment, as well as bulky indivisible goods

Advantages of plasma cutting:

• any metals are processed - ferrous, non-ferrous, refractory alloys, etc.

• the cutting speed of small and medium thicknesses is several times higher than the speed of gas-plasma cutting;

• small and local heating of the cut workpiece, which excludes its thermal deformation;

• high purity and quality of the cut surface;

• process safety (no need for cylinders with compressed oxygen, combustible gas, etc.)

• complex curly clipping is possible

• lack of limitations in geometric shape.

BOARD RAILWAY PLATFORM HATCHWAY COVERS

MAZ-997700

RAIL PRODUCTS:

THERMAL CUTTING SERVICES

TECHNICAL SPECIFICS

Suspension – pneumatic Number of axles / wheels - 3/12 + 2 spare Tires - 235/75 R17.5 Gross weight, kg - 50900 Permissible mass of the equipped trailer, kg - 9000 Width of a platform, mm 530 Platform length, mm 8500

NOTES

31

NOTES

32

NOTES

33

JSC «NC «Kazakhstan Engineering» 010000, Kazakhstan, Nur-Sultan, st. Kunayev 10

Helpline: +7 (7172) 61 19 04

Reception of the CEO: + 7 (7172) 69 55 99 (ext. 1001)

Chancery: +7 (7172) 69 55 99

(ext. 1131,1143, 1209)

Fax: +7 (7172) 61 19 27

e-mail: ke@ke.kz