upgrade your crane with the new - f&m mafcoupgrade your crane with the new ergonomic design •...

EQUIPMENTConnection

EQUIPMENTWINTER 2015Your

A Publication of F&M MAFCO, Inc.

9149 Dry Fork RoadHarrison, Ohio 45030

EQUIPMENTConnection

EQUIPMENTYour

TOLL-FREE 1.800.333.2151WORLD-WIDE 1.513.367.2151

WWW.FMMAFCO.COM

Sales • Service • Rental • Parts...Since 1945Sales • Service • Rental • Parts...Since 1945CONSTRUCTION TOOLS • EQUIPMENT • WELDING CRANES • INDUSTRIAL GASES AND SUPPLIES

UPGRADE YOUR CRANE WITH THE NEW

Ergonomic Design • Isolation from machinery deck for a quieter cab • Expanded cab, approximately 4’ wide • Larger tinted windows for great visibility • Top and front window wipers • LED lighting • Heat and air climate controls • Reclining seat with adjustable height and arm rests • Triple trumpet horn State-of-the-Art Enhancements • Single lever joystick to control all crane operations • Locking-style foot brake controls

AVAILABLE IMMEDIATELY FROM STOCK – REBUILT AMERICAN 9310 WITH MAF-CAB

• Cameras on each side of the rear swing and one on the load line drum • Quad screen monitor for camera surveillance • Full LMI system with factory load charts and safety cutouts Safety Features • Keyed lock-out to prevent free fall • Low engine oil pressure cut-out • Low air pressure alarm • Marine style master disconnect Customization Ideas • Larger viewing monitor • Additional cameras for alternate views • Customized factory load charts

CONTACT:Kevin [email protected]

Tim Fox(44) [email protected]

CINCINNATI, OH • BIRMINGHAM, AL • CARSON CITY, NV • CHARLOTTE, NC • HOUMA, LA • EDMONTON, AB CANADA • CAMBRIDGE, UK

Ryan Arlinghaus [email protected]

SPOTLIGHTproject

Working in the heart of one of the country’s largest cities can be tricky. Existing structures, busy streets, and very limited space can make an seemingly easy erection scheme very difficult, very quickly. The 21 story addition to the London Guarantee Building on Chicago’s Michigan Avenue needed a Powerful Solution. Known as the “Magnificent Mile”, Michigan Avenue is home to 5 star hotels, award winning restaurants, and high end retail stores. Having a tower crane on the outside of the building would have required shutting down a portion of Michigan Avenue for over a

F&M Mafco on the Magnificent Mile

year. Shutting down a portion of one of the busiest streets in one of America’s largest cities was going to be far too costly. The contractor was able to find a place to set the tower crane off the street, on the back side of the building. But, in doing so, there would be no access to disassemble the tower crane with any conventional means. Initially, a 500 ton capacity hydraulic truck crane with a superlift attachment was looked at as a method of disassembly. But, not only would this option require shutting down Michigan Avenue, it would require reinforcing portions of the street just to be able to handle the dead

weight of the crane. Add that to the already high rental price for such a large machine, this option was quickly set aside in the hopes a more economical solution was available. We were able to work with the client’s engineers to overcome the space restrictions with a derrick with enough capacity and reach to disassemble the tower crane directly from the roof top of the 21 story addition. Components were then lowered to scheduled trucks waiting below and timed out to minimize the closing of one of Chicago’s busiest streets.

Another challenging problem solved with a Powerful Solution!Another challenging problem solved with a Powerful Solution!2 www.fmmafco.com

CONTACT YOUR EQUIPMENT CONNECTION SALES TEAM TODAY!

CRANESKevin Coffman513.367.8407

[email protected]

INTERNATIONAL CRANESTim Fox

(44) [email protected]

HOISTS AND DERRICKSBobby McKenna513.367.8478

[email protected]

HOISTS AND DERRICKSTim Kittle

[email protected]

PARTSDon Freese

[email protected]

PARTSScott Griffith 513.367.8268

[email protected]

CRANESRyan Arlinghaus 513.367.8219

[email protected]

PARTSPete Fromhold 513.367.8253

[email protected]

SERVICELarry Kelhoffer 513.367.8270

[email protected]

SURPLUSMark Griffith 513.367.8470

[email protected]

PARTSAndy Keller

[email protected]

FABRICATIONMark Friedmann 513.367.8469

[email protected]

F&M MAFCO is a solid, innovative company with a reputation for quality and on-time delivery. Extra steps are taken prior to shipment to ensure that you receive the proper tooling and equipment on time and in excellent condition. We have a 99.26% order accuracy fulfillment record. Our service does not stop after shipment. A well-trained, experienced staff is only a phone call away, ready to help you make a favorable impression with your customer. In fact, it is the goal of our sales representatives, specialists and technicians to do whatever it takes to deliver what you need on site and on time. Put years of experience to work for you and see for yourself the advantage of Powerful Solutions.

Hurry! Visit www.fmmafco.com / giveawayand enter for your chance to win!

$500 value!$500 value!

WIN A MANITOWOC 4100 DIE CAST MODEL CRANE

* See website for complete details.3Toll-Free 1.800.333.2151 • World-Wide 1.513.367.2151

heavy equipment SERVICE AVAILABLEF&M MAFCO provides a full range of services for all of your heavy equipment needs. We offer both field and in-shop repairs. Our highly experienced employees have a tremendous working knowledge of equipment, rigging, and repair processes. With 70 years in the business we are confident that we can deliver professional results that are cost-effective, timely and conform to industry standards.

Winter is fast approaching. Contact us to discuss winterization packages to help keep your equipment

running through the cold months ahead!

FOR SERVICE CONTACT: Larry Kelhoffer 513.367.8270 [email protected]

REPAIR AND SERVICE FOR CRANES, HOISTS, RIGGING BLOCKS, AND MANY OTHER TYPES OF EQUIPMENT

EQUIPMENT ASSEMBLY AND DISASSEMBLY SERVICES

We currently have four state-of-the-art field service trucks, fully equipped with welders, air compressors and auto cranes. This allows us to offer quick turnaround and emergency repairs. If necessary, service representatives are available 24 hours a day, 7 days a week. From minor repairs to complete rebuilds, we offer a variety of service solutions. Fleet preventive maintenance and repair agreements are also available to keep your project running on time.We can now provide mechanical repairs out of Houma, Louisiana.

Our technicians have extensive knowledge in crawler crane and derricks assembly and disassembly. If you are looking for a knowledgeable rep to advise your crew, or a whole assembly gang, F&M MAFCO can fill that need. Whether it is on land, in the air, or on the water, our working knowledge of rigging and equipment assembly techniques is second to none.

4 www.fmmafco.com

FOR SERVICE CONTACT: Larry Kelhoffer 513.367.8270 [email protected]

SAND BLASTING AND PAINTING (IN-SHOP ONLY)We have the ability to transform the appearance of your equipment: • Making it look great• Helping to prevent the need for structural repairs• Adding years to its useful lifeOur facility in Harrison, OH can handle large pieces of equipment and offers conventional airless spray and HVLP capabilities along with sand and soda media blast capabilities.

EQUIPMENT CONTROLS UPGRADE SERVICE

EQUIPMENT ENVIRONMENTAL UPGRADES

Controls upgrades seen in our MAF-CAB

Sandblast Operation Shop

before

before

before

after

after

after

Do you like the capabilities of your friction rig, but not the antiquated type features and operation of their controls? Are you finding it difficult to get an operator willing to run your equipment because of this? Call F&M MAFCO to discuss the benefits of upgrading your equipment controls with a modular cab.• Current era joystick controls and features• Increased productivity and safety• Operator comfort• Keep the durability you need from your friction rigOperator stations can be remoted and integrate the operation for several pieces of equipment such as barge mounted hoists into a single operator station. See our MAF-CAB feature on the cover and call us for more details.

Technology is changing. It is becoming more and more difficult to find experienced personnel and parts for the traditional diesel powered packages. Additionally EPA requirements are more restrictive for the traditional diesel powered packages. We have the experience you need in replacing the older engine technology on converter driven machines to more environmentally friendly tiered engines and can be incorporated with forward/reversing transmissions.• Controlled load lowering capabilities• Quieter and cleaner operation• Serviceable repair options for the new tiered engines and transmissionsSynchronous drive conversions (drive belt replacing oil and chain applications) are also available.

5Toll-Free 1.800.333.2151 • World-Wide 1.513.367.2151

fabrication and machining operationsFOR FABRICATION CONTACT: Mark Friedmann 513.367.8469 [email protected]

FIELD WORK• Crane boom repair experts• Structural repairs• AWS D1.1 and D1.5 certified welders• Fully equipped, self sufficient, service trucks with multi-process capabilities

ALIGN BORING• Field or shop • Up to 24” diameter• Automated bore welder

BELOW THE HOOK LIFTING DEVICES• Custom BTH equipment for unique needs• Fabricated to ASME B30.20 from client drawings• Engineered designing available to ASME BTH-1• Load testing, B30.20 compliant tags• Complete selection of rigging available

F&M MAFCO has 10,000 ft2 devoted to helping our customers find solutions to structural repairs, obsolete component manufacturing, and turnkey fabrication and machining needs. Our D1.1 and D1.5 certified welders have years of experience in structural fabrications and repairs. Our machinists are highly skilled in CNC manufacturing and stay on the cutting edge of tooling and CAM software. Add CAD professionals who not only understand the software, but more importantly, understand the project and explore the most efficient paths to achieve quality results once the drawing hits the shop floor. Our team prides themselves on a quality product, done on time and on budget. You’ll notice the difference. Working with steel is hard, doing it right and doing it on schedule takes special people and Powerful Solutions. You’ll find both at F&M MAFCO.

6 www.fmmafco.com

TEMPORARY WORKS• Civil projects requiring temporary structures to support permanent construction• Detailing, AWS D1.1 and AWS D1.5 fabrication• Painting and blasting• Load testing as required• Full assembly services• Complete CNC machine shop and burn table• An economical one stop solution

BOOM REPAIR• Terex trained• AWS certified welders• Fully documented and certifiable repairs• Full material traceability• Our quality is second to none• Worldwide delivery

SPECIALTY TOOLING AND EQUIPMENTContact us to discuss your specialty tooling or equipment requirements. If you have an idea, we can bring it to life in steel. We are experienced in finding unique fabricated solutions to difficult problems.

FOR FABRICATION CONTACT: Mark Friedmann 513.367.8469 [email protected]


AMERICAN S50 STIFFLEG DERRICK• 225 Ton capacity• 50 Ton capacity at 200’ radius• 30’ jib with 15 Ton capacity• (4) available• Tower configurations availableLocation: OHIO

CONTACT:Tim Kittle 513.367.8214 [email protected]

Bobby [email protected]

DERRICKS

BRIDGE CONSTRUCTION• Lift directly from bridge deck• Movable sleds for continuous assembly

ROOFTOP MATERIAL HANDLING• Lightweight and compact components• Ideal for dismantling tower cranes

99Tons

15Tons 120’

Load Comparison at RadiusS-50 Derrick (225T) vs. 4100 S-II (230T)

SUPERIOR CAPABILITY• High capacity at long radius• Will outlift equivalent crawler cranes

BARGE MOUNTED• Marine and offshore capable• Duty cycle applications

TOWER MOUNTED• Increased elevation and extended reach• Perfect for congested jobsites

• Our fleet ranges from 2.5 Ton to 500 Ton• Lightweight components designed for easy handling and erection• Compact pieces will fit in most service and construction elevators• Lifts can be made directly from the roof• Low maintenance• Ideal for tower crane dismantling• Proven time and money saver• Adaptable configurations for numerous applications

8 www.fmmafco.com

AMERICAN S70 STIFFLEG DERRICK

TIMBERLAND SD17 STIFFLEG DERRICK

• 500 Ton capacity• 55 Ton capacity at 320’ radius• 240’ of Manitowoc #38 boom• 80’ of Manitowoc #27 jib• Tower configurations availableLocation: OHIO

• 17 Ton capacity• 2.5 Ton capacity at 100’ radius• 110’ boom• (4) available• Guy derrick and Chicago boom configurations availableLocation: OHIO






WE HAVE MANY HOISTS REBUILT, STORED INDOORS AND AVAILABLE FOR IMMEDIATE SALE OR RENTAL

Double drum • 2,150’ of 7/8” per drum 36,000 lb • (3) available

Single drum • Diesel powered 54,000 lb • (2) available

Double drum • Diesel • 550,000 lb5,500’ of 2 ½” rope per drum

Double drum • Diesel • 21,500 lb 1,600’ of 5/8” wire rope per drum

HOISTS Call for Pricing and Availability!

CLYDE FRAME 6 CLYDE FRAME 7

Double drum • Electric • 21,500 lb 1,600’ of 5/8” rope per drum

CLYDE FRAME 5

CLYDE FRAME 8

SKAGIT AED-295

CLYDE AD-150 CLYDE AD-175 SKAGIT BU-140

Three drum • Diesel • 41,500 lb 2,500’ of 1” rope per drum

CLYDE FRAME 5

ready to ship ready to ship

Double drum • Diesel • 200,000 lb 3,800’ of 1 ¼” rope per drum

(2) available

Double drum • Diesel • 300,000 lb4,000’ of 1 ¾” per drum

ready to ship

ready to ship

Double drum • Diesel • 200,000 lb 1850’ of 1 ¼” per drum

Three drum • 114,000 lb 3,000’ of 1 1/8” per drum • (2) available

SKAGIT RB-80 TIMBERLAND SW17 TIMBERLAND 500-1-30E

Single drum • Diesel Personnel rated • 8,000 lb at 492 fpm

Single drum • 50,000 lb • Electric (2) available

ready to ship

10 www.fmmafco.com

ready to ship ready to ship ready to shipDouble drum • Electric/hydraulic

7,000 lb • 1,000’ of ½” rope per drum (2) available

Double drum • Electric/hydraulic20,000 lb at 297’ per minute2,700’ of 7/8” rope per drum

TIMBERLAND HR160 TIMBERLAND HR280 TIMBERLAND SW14 ESSEX 7000

Three drum (fourth drum available) Diesel/hydraulic • 28,000 lb at 186 fpm

5,200’ of 7/8” rope per drum

Single drum • Diesel • Personnel rated 4,475 lb at 479 fpm • (6) available

AMCON 385 AMCON 270 WINTECH CP15000-25 MANITOWOC 390

ready to shipThree drum • Vicon converter

(4) availableDouble drum • Diesel • 135,000 lb

3,000’ of 1 1/8” rope per drumThree drum • 65,000 lb 2,600’ of 1” per drum

Single drum • Electric • 15,000 lb1,600’ of ¾” rope

ready to ship

LANTEC 4100 WINCH AMERICAN 70-B AMERICAN 180A

AMERICAN 210

Single drum • Hydraulic • 29,000 lb1,600’ of 1” rope • (2) available

Double drum • Diesel • 15,000 lb1,600’ of ½” rope per drum

S/N H3858 • Four drum • Stack

Double drum • Diesel • 42,000 lb1,800’ of 7/8” rope per drum

AMERICAN 380 AMERICAN 550 AMERICAN 1400

Three drum • Diesel • 75,000 lb2,900’ of 1 1/8” rope per drum

Double drum • Diesel • 105,000 lb5,400’ of 1 1/8” rope per drum

Single drum • Electric/hydraulic65,000 lb • 6,000’ of 1 1/8” rope

per drum

AMERICAN 180

Double drum • Diesel • 30,000 lb2,000’ of 1” wire rope per drum

(2) available

AMERICAN 250A AMERICAN 250A AMERICAN 250A

AMERICAN 280

Double drum • Diesel • 75,000 lb2,900’ of 1 1/8” rope per drum

Three drum • Diesel • 54,000 lb4,400’ of 1” rope per drum

Three drum • Diesel 25,000 lb at 265 fpm

2,900’ of 1 1/8” rope per drum

S/N H3796 • Four drum • Stackready to ship

FOR HOISTS CONTACT: Tim Kittle 513.367.8214 [email protected] • Bobby McKenna 513.367.8478 [email protected]


CONTACT:Tim Fox [email protected]

Kevin Coffman [email protected]

manitowoc 4100W S-II X-tender

manitowoc 4100 s-iii TRAVELING RINGER ATTACHMENTS

MANITOWOC 4600 S-III CRANE AND S-II RINGER

• Ringer attachments S/N 10144 and 10217• Available with optional traveling ringer attachments S/N 17004 and 17005• 220’ #27 boomLocation: SPAIN

• S/N 41685 and 41701• Crawler cranes• 320’ #67 main boom• 422 Ton capacity at 90’ radius• Powered and pivoting crawlers• Cummins diesel engineLocation: GULF COAST, USA

• S-III S/N 46367• S-II ringer S/N 10207• Cummins diesel engines• 200’ #37 main boom• 80’ #27A mastLocation: EUROPE

CONTACT:Tim Fox(44) [email protected]

Kevin [email protected]



12 www.fmmafco.com



manitowoc 4600 s-iii• S/N 46294• Cat diesel engine• 220’ main boom• 40’ fly jibLocation: DUBAI



1993 manitowoc 4100 S-III RINGER• 4100 S/N 41896 • S-III S/N 10336• 130’ #22 mast• 220’ #27 boom• Currently being restoredLocation: MOROCCO

available for rent

1998 grove rt865b• S/N 86364 • 125’ boom • Cummins diesel• 35’-60’ lattice extension Location: OHIO

CONTACT:Kevin Coffman [email protected]

Ryan [email protected]

SPECIAL PRICE$169,500


allied tb80-70• S/N 2153• Hydraulic pedestal crane • 50,000 lb capacity at 24’ radiusLocation: OHIO

intercon gantry crane• 28 Ton capacity • 199’ x 52’ x 14’• Hydraulic crane • 90’ radius • Cat engineLocation: EAST COAST, USA



1982 liebherr bos 40/130• S/N 126427• 40 Ton pedestal crane• 62’ radius• 150’ boomLocation: UK

north pacific crane co. alaska marine crane• Manufactured and certified in 2001 • Model MCT15075-01• Electric power• 70,000 lb capacity at 60’ radiusLocation: OHIO







14 www.fmmafco.com

1982 link-belt api-238A• S/N 22TH2-126IC• S/N 22TH2-127IC• 114 Ton capacity• 100’ boom and jib• All aluminum cabLocation: OHIO



GALION 150P• Self-proportioning, 3-section, hydraulic power boom• 30,000 lb capacity • 360º swing • 75º boom elevationLocation: OHIO

available for rent

2 available



CABLE “HI-LINE” CRANE

for sale or rentCONTACT:Tim Kittle 513.367.8214 [email protected]


• 50 Ton capacity • 335’ towers• Manufactured in 2007• Up to 950 fpm inhaul/outhaul speeds• (2) units available

Watch the Hoover Dam Bypass Project videowww.youtube.com/fmmafco


• Lackie Bros S200 • Stationary gantry • 200 Ton capacityLocation: HOUSTON

gantry crane

FOR CRANES CONTACT: Kevin Coffman 513.367.8407 • Tim Fox (44) 1284.787713 • Ryan Arlinghaus 513.367.8219

1968 Manitowoc 4000W• S/N 40220 • 150 Ton capacity • Vicon power load lowering • Cummins 855 engine • #22 main boomLocation: OHIO

1980 Manitowoc 4100 S-I • S/N 41662• Vicon power load lowering• #22 main boom• 6 sheaves in boom tip• Fully overhauled and repainted• Cummins NT855 diesel engine Location: UK

Manitowoc 4000W • S/N 40282• 135 metric Ton capacity • Lift crane/dragline • 190’ main boom• GM diesel engine Location: SOUTH AFRICA

1997 Manitowoc 4100 S-II• S/N 413061• Lift crane/clamshell/ dragline• 180’ main boom • Cummins N-14 diesel engine Location: SOUTH AFRICA

Manitowoc 4100 S-II • S/N 41263• Vicon power load lowering• #22 main boom• 230 Ton capacity• Cummins engineLocation: OHIO

1971 Manitowoc 4100 S-II • S/N 41086• 230 Ton capacity • Crawler crane• Vicon power load lowering Location: OHIO

1979 Manitowoc 3900• S/N 391224• Vicon power load lowering • Clamshell machine• #8 angle cord boom• Diesel Detroit 12V-71• 38” track padsLocation: OHIO

for sale or rent

SPECIAL PRICE $165,000 available for rent

available for rent16 www.fmmafco.com

1981 American 5680 1978 American 8450

1979 American 93101962 American 999C

Clyde Model 28



available for rent

• S/N 8101-AO-2479• 75 Ton capacity• Self propelled crane• 80’ 47” HD boom• GM 1043-5000 diesel engine• Standard swingLocated in OHIO

• S/N GS-7082• 110 Ton capacity• Crawler crane• Cummins engine 855• 58’ boom• Third drumLocation: OHIO

• S/N GS19990• 225 Ton capacity• Crawler crane• Cummins 855 diesel with twin discLocation: OHIO

• S/N GS18022• 150 Ton capacity• Truck crane• 80’ #77HL boom Location:JOHANNESBURG, SOUTH AFRICA

SPECIAL PRICE $129,500

• S/N CW-3800• Gantry mounted revolver crane• With new controls Location: MARYLAND

• S/N 4EV869• 110 Ton capacity • Crawler crane• With 110’ main boom• Clamshell• Cummins engine M-IILocation: OHIO

1982 Link-Belt LS-418A

FOR CRANES CONTACT: Kevin Coffman 513.367.8407 • Tim Fox (44) 1284.787713 • Ryan Arlinghaus 513.367.8219

clyde model 37• S/N CW-3938• Model 37-E-130-20 • Revolver craneLocation: MARYLAND

1974 american 9720• S/N GS17416 • 125 Ton capacity• 100’ of 58” boom with ABSH base• Electric • No longer attached to the bargeLocation: OHIO


NEW AND USED CRANE PARTSF&M MAFCO’s diverse and renowned jobsite solutions have naturally led to the best staff and resourced parts group in the industry. Our sales staff has a combined 110+ years experience in the crane and lifting industry world-wide.

At F&M MAFCO we manufacture and maintain a complete line of aftermarket crane parts for Manitowoc 3900, 4000, 4100, 4600 and American 900, 1100. We continually part out your top manufacturer machines including: American, Manitowoc, P&H, Lima, and Link-Belt. With over 2,000 pieces of boom and jib in stock, plus drums, laggings, gears, clutches and other replacement pieces, we have all your “hard to find” parts, too.

We understand downtime is unacceptable because we, like you, have our cranes at jobsites day in and day out. We strategically placed our inventory in warehouses around the world. Whether you need a single trackpad or a complete set of REBEX® side frames (from our REBuilt EXchange Program) we will meet your needs and exceed your expectations. Can’t find what you are looking for? Call us today!

FOR PARTS CONTACT: Pete Fromhold 513.367.8253 • Andy Keller 513.367.8403 • Don Freese 513.367.8263

18 www.fmmafco.com

LS518 Boom Hoist Box

Small Swinger Assembly 900

The items offered are primarily for:

900 and 1100 Series 418 and 518 Series 3900, 4000, 4100 and 4600 Series

rebex® major component rebuilt exchange program

Idler

Drive Tumblers

REBEX® (Rebuilt Exchange) is our “major component” rebuilt exchange program that will reduce your machine’s downtime and save you money. We will send you a side frame, torque converter, Rotek bearing, swingers, roller paths or whatever assembly you need. Once the REBEX® component is installed on your machine, send us your damaged one. “Because Time is Money!”

Brake and Clutch Band Assemblies Large Swinger Assembly 900

3rd Drum Driver 900 Boom Hoist Box 4100 Manitowoc Roller Paths

Track Pads


Manitowoc “Vicon” Twin Disc 10,000 Series Twin DiscMain Hoist Drum


reconditioned boom and jib bases, tips and insertsWe are a “one-stop-shop” for all your boom and part needs. We also have heavy-lift and tower attachments. While we specialize in American, Manitowoc, P&H, and Link-Belt cranes, we also provide parts sourcing capabilities for all manufacturers. Over 2,000 pieces of reconditioned boom and jib are in stock, plus drums, laggings, gears, clutches, and other replacement pieces.

Manitowoc #8 Tip

MAKE MODEL TYPE DESCRIPTIONBOOM

Manitowoc 4000 #22 Base for 4000

Manitowoc 4000, 4100 #22 10’ Insert


Manitowoc 4000, 4100 #22 30’ Tapered Insert


Manitowoc 4600 #27 Tip

Manitowoc 2300, 2800, 2900 #3 Boom Base

Manitowoc 3800, 3900, SC100, SC135, SC150 #8 Base

Manitowoc 3800, 3900, SC100, SC135, SC150 #8 Tip

Manitowoc 3800, 3900, SC100, SC135, SC150 #8 10’ Insert



Manitowoc 3900, 4000 #9 Base

Manitowoc 3900, 4000 #9 Tapered Tip




Manitowoc 3900, 4000 #12 35’ Transition

Manitowoc 4000 #13 30’ Insert

Manitowoc 2800, 2900, 3100, 3500, SC70 #16 Tip

Manitowoc 2800, 2900, 3100, 3500, SC70 #16 Transition

Manitowoc 2800, 2900, 3100, 3500, SC70 #16 20’ Insert



Manitowoc 2800, 2900, 3000, 3900, 4000 #18 30’ Insert


Manitowoc 4600 #38 Base


HARD TO FINDManitowoc 4100 #22 Base for 4100



Manitowoc 888 #22E 20’ Insert


Manitowoc M85W #47 10’ Insert

Manitowoc M85W #47 20’ Insert

Manitowoc SC135 #52 20’ Insert

Manitowoc 777 #78 Base



JIBManitowoc 4600 #27AB 80’ Jib Assy

Manitowoc Most Models #110 Jib Base

Manitowoc Most Models #110 10’ Jib Insert

Manitowoc 3900 #112-113 Jib Base

Manitowoc 3900 #112-113 Jib Tip

Manitowoc 3900 #112-113 Jib Mast

Manitowoc 3900 #112-113 Jib 10’ Insert

Manitowoc #22 10’ Insert

Manitowoc #22 Boom Base Manitowoc #22 40’ Insert

Manitowoc #27 Boom Insert

Manitowoc #78 Boom Base Section

Manitowoc #22 TipManitowoc #9 Boom Base


20 www.fmmafco.com

Manitowoc 4600 Tower Attachment

Manitowoc #22 Rooster Dual 36” Sheave Grooved 1 1/8”

Manitowoc #123 Jib

Manitowoc 3900T Tower Attachment

American 900 Series 58H Base

American 1100 Series 94” Boom

American 900 Series 92” Boom Tip

American 92” Base Section

Manitowoc 2300, 2900, 3000, 3600, 3900 #121 Jib Base

Manitowoc 2300, 2900, 3000, 3600, 3900 #121 Jib Tip

Manitowoc 2300, 2900, 3000, 3600, 3900 #121 Jib Mast

Manitowoc 2300, 2900, 3000, 3600, 3900 #121 Jib 10’ Insert

Manitowoc 4600 #122A Jib Base

Manitowoc 4600 #122A Jib Tip

Manitowoc 4600 #122A Jib Mast

Manitowoc 4600 #122A Jib 10’ Insert

Manitowoc 3900, 4000, 4100 #123 Jib Adapter

Manitowoc 3900, 4000, 4100 #123 Jib Base

Manitowoc 3900, 4000, 4100 #123 Jib Tip

Manitowoc 3900, 4000, 4100 #123 Jib Mast

Manitowoc 3900, 4000, 4100 #123 Jib 10’ Insert

Manitowoc 2900, 3000, 3600, 3900, 4000 #124 Jib Base

Manitowoc 2900, 3000, 3600, 3900, 4000 #124 Jib Tip

Manitowoc 2900, 3000, 3600, 3900, 4000 #124 Jib Mast

Manitowoc 2900, 3000, 3600, 3900, 4000 #124 Jib 10’ Insert

ATTACHMENTSManitowoc 4000, 4100 #22 Hammerhead Tip

Manitowoc 4000, 4100 #22 1 Sheave Aux Tip

Manitowoc 4000, 4100 #22 2 Sheave Aux Tip

Manitowoc 3900T Tower Attachment

Manitowoc 4100 Tower Attachment

Manitowoc 4100 Ringer Attachment

Manitowoc 4100 SII Traveling Ringer Attachment

Manitowoc 4600 SIII Ringer Attachment

Manitowoc 3900, 4000 #9 Hammerhead

MAKE MODEL TYPE DESCRIPTIONBOOM


American 900 Series 58H Tip

American 900 Series 58H 10’ Insert



American 900 Series 77S Base

American 900 Series 77S Tapered Tip

American 900 Series 77S 10’ Insert


American 900 Series 77S 40’ Transition







American 1100 Series 94H Tip




American 300, 500 Series 30S Tip

American 300, 500 Series 30S 10’ Insert


American 300, 500 Series 30H Base



American 400, 500, 700 Series 46S Tip

American 46H 40’ Insert American 77SA Boom Base



American 1400 118’ Boom

American 900 Series 58H Insert

American #9 Jib

American Revolver 203

American #16HL Jib

American 58HR 20’ Insert

American 1100 Series 94” Boom Tip

American 400, 500, 700 Series 46S 10’ Insert




American 400, 500, 700 Series 46H Tip

American 400, 500, 700 Series 46H 10’ Insert

American 400, 500 Series 47S Tip




American 400, 500 Series 47H Base

American 400, 500 Series 47H Tip

American 400, 500 Series 47H 10’ Insert






American 900 Series 58S Tip



American 700 Series 59S Tapered Tip




American 700 Series 59H Tapered tip




American 900 Series 76S Tip


American 900 Series 76S 20’ Transition

American 700, 900 Series 77H 40’ Transition

HARD TO FINDAmerican 1400 130 Tip

American 1400 130 25’ Insert

American 1400 130 50’ Insert

American Locomotive 830DE Tip

American Locomotive 830DE 5’ Insert

American 1400 1400 Mast Base 118”

American 1400 1400 20’ Mast Insert 118”

American 1400 1400 40’ Mast Insert 118”

JIBAmerican 400, 500 Series #6 Jib Base, Mast, Tip, 10’

American 400, 500 Series #7HL Jib Base, Mast, Tip, 10’, 20’

American 500, 700, 900 Series #9 Jib Base, Mast, Tip, 10’

American 500, 700, 900 Series #9HL Jib Base, Mast, Tip, 10’ 20’

American 500, 700, 900 Series #15 Jib Base, Mast, Tip, 10’

American 900 Series #16HL Jib Base, Mast, Tip, 10’ 20’

ATTACHMENTSAmerican 900 Series 58H 2 Sheave Extension

American 900 Series 77S 5 Sheave Hammerhead

American 900 Series 92H Rooster Extension

American 900 Series 94H 1 1/8”

American 1100 Series 94H 1 ¼”

American 700 Series 59S Hammerhead Tip

American 700 Series 59H Hammerhead Tip

American 77” Hammerhead TipAmerican Rooster Sheave 900 and 1100 Series 92” and 94”

American 203 Revolver Boom Tip


22 www.fmmafco.com

dismantled machines save $$$ on all your crane parts

AMERICAN 5299 AO2050 AMERICAN 11320 AO2644FAMERICAN 5650 GS17729W AMERICAN 999C GS7082

AMERICAN 5650 GS14121W AMERICAN 9720 GS17416 MANITOWOC 3900B 391070 MANITOWOC 4000W 40155

MANITOWOC 4000W 40345 MANITOWOC 3900W 395092 LINK-BELT LS518 4EW426MANITOWOC 3900W 395077

P&H 670WLC 30847LINK-BELT HC138 19G7579 P&H 670TC 41176 GROVE RT700B 71726



MANITOWOC EQUALIZER

AMERICAN OUTER BAIL AMERICAN INNER BAIL

New and used • Various diameters ½” to 3” groove size

900-1100 Series 900-1100 Series Like new • Part # 176557

For Clyde cranes and hoists For Clyde and American cranes and hoists

SHEAVES MANITOWOC 888 MAST

FLEETING SHEAVES DRUM GEARS

American • Manitowoc • Link-Belt 3900, 4000 and 4100

Large assortment availableAmerican • Manitowoc • Link-Belt

Electric Manitowoc #22

American 58H

1000’s to choose from2 ¼” heavy duty single sheave fairlead deck

A variety to choose from New • (3) available • 14” model 3410 Rated 3190 gpm • 158’ HD • 200 Hp

CRANE FAIRLEAD

COUNTERWEIGHTS

SPEED REDUCER GEAR GULF COAST TURBOCHARGER MI-T-M PRESSURE WASHER

SWIVELING DECK FAIRLEADS GOULDS PUMPSCLYDE SPROCKETS

HYDRAULIC POWER UNIT

TURNBUCKLES

BOOM TIP EXTENSION

BOOM TIP EXTENSION

6BT5.9 • NTA855C-360

CUMMINS DIESEL ENGINES


Grizzly Planetary For an Alco 251 F diesel engineUsed in marine ships and tugboats

Diesel

24 www.fmmafco.com

Cable spooling hydraulic array winch(3) available

INTEROCEAN MODEL 1531

Three drum • Personnel ratedHydraulic

New • 5,000 lb capacity

Rated line pull 30 Ton 10 Ton • BW14

Electric • 26,000 lb capacity

AC Hoyle Co • S-509 • Cable spooler Electric • Gear driven

Now available for immediate rent 8’ x 10’ and other sizes available

Model 4128-40 • (3) available

Western Gear Corp • HydraulicGrooved drum • 19,500 lb SLP

(130) available • 60” wideComplete with new pins

Rated line pull 3,800 lb

BEEBE BROS. HAND WINCH

INGERSOLL RAND WINCH

REEL SHIP DECK WINCH ROAD PLATES

VMW MARINE DAVIT WINCH

HIGHLINE WINCH DEMAG TRACK PADS

MANITOWOC 4100 BRADEN AIR TUGGER

JEAMAR WINCH

Manitowoc • Koehring • American

HARD TO FIND LAGGINGSFOR PARTS CONTACT: Pete Fromhold 513.367.8253 • Andy Keller 513.367.8403 • Don Freese 513.367.8263

american 900 Series

Half Jaw Clutch

Smooth Drum Lagging

Sheave

Third Drum

Large Swing Drum

Drum Assembly

Coupling Half25Toll-Free 1.800.333.2151 • World-Wide 1.513.367.2151

manitowoc 4600 spare parts

clyde revolver spare parts

Reconditioned GE Motor

Clyde #76 Insert Bull Gear Segments

Clyde Swinger Assembly Clyde #52 Boom

Clyde #28 Sheaves Clyde Carriages

Transmission Box complete with 3 Torque Converters

Boom Carrier

Boom Base #38 MA0761 Main Drive Shaft and Bevel Gear Assembly

Miscellaneous Gears: Bevel and Pinion Counterweight and Back Stops Drive Housing Assembly Front and Rear Drum Shaft with Gears

S-III Ringer Attachment Reconditioned Ringer 27AB/Jib with Base and Tip MA0984

New (Bare) S-IV Gantry

Internal Transmission Box Gears

FOR CLYDE REVOLVER AND MANITOWOC 4600 SPARE PARTS CONTACT: Scott Griffith 513.367.8268 [email protected]

26 www.fmmafco.com


Manitowoc 4100 spare Ringer parts

we are a LSI-Robway distributorWe are now distributors of LSA-Robway/ Trimble Lifting Solutions products. LSA-Robway is a market-leading manufacturer of wireless and cable-based safety instrumentation for the crane and lifting industry.

Their products include: load cells, load pins, line riding tensiometers, LMI systems with pressure transducers, rated capacity indicators/limiters, underhook load cells, load pin shackles, inclinometers, anti-two-block systems, cable reels (length/angle/radius systems), wind speed sensors and displays, slew sensors, work area definition software and more.

Multi-sensor display seen in our MAF-CAB

We are a Rudomatic Distributor• Single, double and triple barrel configurations available

New Tagline Winder

Rebuilt Tagline Winder

before after

We are proud to announce we are a full-line distributor for Rudomatic taglines, hose reels, magnet reels and combination reels.

We are stocking certain key and often required parts: cables, right and left hand springs, shafts for multiple barrel taglines, oil seals, gaskets, bearings, brass bushings and shear pins.


miscellaneous Rigging Components large assortment

Large heavy duty Crosby Shackles200-1,000 Ton





Girder Clamps and Beam Clamps Miscellaneous used heavy Chokers


Thousands of feet of used Cable and Lashing • All diameters

Crosby Cable Clips • 2 ½” to ¼” New and used

Rigging Hardware • New and usedWedge Sockets • All sizes Locomotive Spreader Bar

clamshell buckets

CS007 • ½ yard • Mack4’8” L x 2’11” W x 6’7” H

1,902 lb • ½” groove sheaves

CS005 • 13 yard • NYE Welding Co.13’ L x 7’10” W x 16’ H

18,060 lb • 1 1/8”/1 ¼” groove sheaves

CS002 • 7 ¾ yard • Blaw Knox 9’10” L x 6’6 W x 11’6” H

11,300 lb • 1”/1 1/8” groove sheaves

CS009 • ¾ yard • Erie 6’1” L x 3’1” W x 6’7” H

3,676 lb • ¾” groove sheaves

28 www.fmmafco.com

hook, snatch and rigging blocks up to 1,200 ton

Ansell • 5 Ton • 391 lb Ansell • 15 Ton • 1130 lb Ansell • 30 Ton • 1 sheave 26” • Grooved 1 ¼”

Johnson • 20 Ton • 1 sheave 18” • Grooved 7/8”

Johnson • 20 Ton • 1 sheave 20” • Grooved 7/8”

Johnson • 140 Ton • 5 sheaves 24” • Grooved 1”

Manitowoc • 350 Ton • 9 sheaves 33” • Grooved 1 ¼”

McKissick • 15 Ton • 1 sheave 16” • Grooved 5/8”

McKissick • 25 Ton • 2 sheaves 24” • Grooved 1 1/8”

McKissick • 30 Ton • 2 sheaves 14” • Grooved 5/8”

McKissick • 35 Ton • 2 sheaves 18” • Grooved 1”

McKissick • 75 Ton • 1 sheave 36” • Grooved 3/8”

McKissick • 80 Ton • 3 sheaves20” • Grooved 1”

McKissick • 155 Ton • 6 sheaves24” • Grooved 1 1/8”

McKissick • 600 Ton • 18 sheaves30” • Grooved 1 ¼”

Miller • 5 Ton • 100 lb

Miller • 8 ½ Ton • 330 lb Miller • 15 Ton • 800 lb Ropeblock • 35 Ton • 1 sheave 24” • Grooved 1 1/8”

Ropeblock • 150 Ton • 5 sheaves24” • Grooved 1 1/8”



on-site support systems

on-site arc certification system

integrated supplier “preferred vendor” program

• Industrial and construction tools and equipment• Rental tools and consumable supplies• Arc certification services (weld test)• Complete rigging and splicing facilities

WE CAN DELIVER EVERYTHING YOUR PROJECT REQUIRES, READY TO GO, ON-SITE AND ON-TIMEF&M MAFCO offers On-Site Support Systems that can be customized to meet your site’s needs. We set up a tool room on-site that enables our inventory replacement systems to be driven by usage or the standard min./max. system. This combination keeps inventory levels supportive of the fluctuations in man-hour usage of the job and makes sure tools, consumables, welding, safety, and rental items are available anytime you need them—24 hours a day, 7 days a week.

F&M MAFCO’s On-Site Arc Certification System is a mobile welder testing and training facility. Our versatile 48 and 53 foot trailers allows your welding tradesmen to remain on-site to perform training and certification exercises, to save your company money on travel and additional expenses.

• Cranes• Derricks and hoists• Air tuggers• Welding equipment

Stocked shelves

Booth Interior Fan Arrangement

Common Workbench

TRAILER FEATURES:• (8) workstations for testing or training• Common work area • Storage area• Administrative area

Each test/training station is a spacious, well-lit booth equipped with a work holding fixture that allows the welder to test welding capabilities in multiple positions, including 2G, 5G and 6G for pipe welding and 1G, 2G, 3G and 4G for plate welding. Our custom designed air handling system provides a comfortable, fume-free environment for each welder.

FOR ON-SITE SYSTEMS CONTACT: Customer Account Coordinator • 1.800.333.2151

30 www.fmmafco.com

qc21 lifting products

An F&M MAFCO, Inc. Company QC21 WIRE ROPE SLINGS MEAN QUALITY• Suppliers are chosen and evaluated for quality of materials and services• Manufacturing processes are controlled• Performance is monitored

QC21 WIRE ROPE SLINGS ARE TRACEABLE• Product and process documentation• Serialized identification

QC21 WIRE ROPE SLINGS ARE COMPLETE WITH• Heavy duty working load limit tags• Identification exceeds ASME B30.9 standards

THE QC21 WEB SLING TAG • Abrasion resistant• Fade resistant• Permanent identification• Permanently traceable (no ink marker for serial number or length)• Transparent• UV light resistant• Permanently attached• Available in English and Spanish (with metric conversions)

The Only Synthetic Sling Tag Permitting Visual Inspection!

QC21 SYNTHETIC WEB SLINGSWORKING LOAD LIMIT IN LB

..

..

..

60˚ 45˚ 30˚

1/4”5/16”3/8”7/16”1/2”9/16”5/8”3/4”7/8”1”

1 1/8”1 1/4”1 3/8”1 1/2”1 3/4”

2”2 1/4”2 1/2”2 3/4”

3”

QC21 SYNTHETIC WEB SLINGSWORKING LOAD LIMIT IN LB

..

..

..

60˚ 45˚ 30˚

1/4”5/16”3/8”7/16”1/2”9/16”5/8”3/4”7/8”1”

1 1/8”1 1/4”1 3/8”1 1/2”1 3/4”

2”2 1/4”2 1/2”2 3/4”

3”

QC21 is our Quality Control System for the 21st century industrial slings. It gives us the opportunity to expand our global presence in hoist and specialty rigging. Our goal is to build the best sling products available anywhere in the world. We offer a complete line of rigging and lifting essentials.

FOR QC21 CONTACT: Customer Account Coordinator 1.800.333.2151

on-site arc certification system


RENTAL EQUIPMENT SELECT ITEMS

Mechanical R.CB1800MEC

Electric R.CB555ELE

Classic 300D R.WEL300DSL

LN-25 CC/CV R.WELVOLTFED

1,000 lb R.TUG1000

10,000 lb Double DrumR.TUG10000DBL

375 CFMR.AIR375DSL

750 CFMR.AIR750ELE

Weld LeadR.WEL050TWLD

Weld WhipR.WELSTINGTWWHIP

Weld Ground LeadR.WELGRNDTWWHIP

inverter weld racks

PNEUMATIC TUGGERS

AIR COMPRESSORS

connectorsconduit BENDERS

DIESEL WELDERS and WIRE FEEDERS

9-Pack RackR.WEL09RACK

6-Pack with 10 KVA Distribution TransformerR.WEL06RACK/10KVA

4-Pack RackR.WEL04RACK

4-Pack with 10 KVA Distribution TransformerR.WEL04RACK/10KVA

Our rental fleet of small tools, hydraulic systems, welding equipment, rigging supplies, and mechanical and electrical equipment is one of the most complete anywhere. We pair it with our First Rate Rental Advantage Program to test and certify all our equipment before it goes out. You can count on F&M MAFCO to deliver. Every Tool. Every Time. No Exceptions. • Air and manual chain hoists • Benders and threaders • Tuggers, blocks and trolleys • Radios and chargers • Milling tools and specialty items • Impact wrenches and power tools • Welding equipment and compressors • Hydraulic systems, air casters and bags • Tool, shower, office and weld test trailers

FOR RENTAL CONTACT: Customer Account Coordinator • 1.800.333.2151

32 www.fmmafco.com

Collapsible Staging R.SS18

Air Personnel Hoist R.PH1000AIR

AERIAL WORK PLATFORMS

Hydraulic TorqueR.TWR.75HYD

Air Impact WrenchR.IMPSPLAIR

Bolt Tension Meter R.BOLTEN-MS

Manual Chain Hoists From 1/2 - 50 Ton

Electric Chain HoistsFrom 1 - 15 Ton

Air Chain HoistsFrom 1 - 25 Ton

Chain Pullers/Come-A-LongsFrom 1/2 - 9 Ton

2-8 Ton R.BCL

Mongoose Millhog R.MILMONGOOSEAIR

Wart MillhogR.MILWARTAIR

Mini Millhog R.MILMINIAIR

Ground MillhogR.MILGROUNDAIR

threading machines

POWER DISTRIBUTION PANELS

bolting equipment

beam clamps

CHAIN HOISTS AND PULLERS

milling tools

FOR RENTAL CONTACT: Customer Account Coordinator • 1.800.333.2151

1224 Pipe ThreaderR.PT1244

535 Pipe ThreaderR.PT535

25 KVA Power Distribution TransformerR.WEL575/025DISTRANS

200 AMP ElectricalDistribution PanelR.WEL200PDP

30 KVA Power Distribution TransformerR.WEL30DISTRANS


taylor y-90-tcrough terrain forklift

2006 genie s125boom lift

QUANTITY CRANE HOURS LOCATION PRICE

1 2000 Broderson # IC200-2C 15 Ton Carry Deck Crane, Cummins Diesel 3420 OH $46,000

12003 Broderson # IC-803F 8.5 Ton 4x4 4-Wheel Steer

Carry Deck Crane with Dual Fuel 30’ Boom with 10’ Jib Open Cab

4079 OH $36,000

QUANTITY FORKLIFT HOURS LOCATION PRICE

11979 Taylor # T-90-TC 90,000# Rough Terrain Forklift

with Detroit Diesel, Dual Front Tires with 9’ Forks and 16’ Wide Mast Enclosed Cab

9870 LA $110,000

1 1995 Clark # GPX50E 8000# Pneumatic Tire Forklift 6 cyl. LP Power with 3-Stage Mast and Side Shift 4317 NV $12,500

QUANTITY AERIAL LIFT HOURS LOCATION PRICE

1 2006 Genie # S125 125’ 4x4 Aerial Lift Powered by Duetz Diesel 3313 OH $75,000

1 2006 Genie # S125 125’ 4x4 Aerial Lift Powered by Cummins Diesel 2600 NV $75,000

QUANTITY WELDER HOURS LOCATION PRICE

1 2008 Miller Air Pak Diesel Welder/Compressor CC/CV with Duetz Diesel, Cold Weather Package and Trailer 3038 OH $10,500

1 2005 Miller DUOP 600 Amp Duetz Diesel Welder with Trailer 4906 OH $7,500

1 2012 Miller Big Blue 500D 500 Amp Duetz Diesel Welder with Trailer 1832 OH $10,500

1 2009 Miller Big Blue 500D 500 Amp Duetz Diesel Welder with Trailer 3592 OH $9,500

1 2008 Lincoln Vantage # 400SS 400 Amp Diesel Welder with Trailer 5353 OH $7,000

1 2004 Miller Mark VIII 8-Pack Elec. Welder OH $4,250

3 1993-1997 Miller Mark VIII 8-Pack Elec. Welders OH $2,500

surplus equipmentF&M MAFCO sells, rents, repairs, and reconditions construction tools as well as large construction equipment. Our surplus equipment department specializes in refurbishing quality tools and equipment for sale, some with factory warranties.

Our vast array of products consist of: cranes, forklifts, aerial lifts, air compressors, welders, benders, threaders, rigging, power and hand tools plus a large quantity of quality support equipment for the construction industry.

• (2) available• Cummins diesel• 125’ 4x4 aerial lift• 2600 hours on unit in NV• 3320 hours on unit in OHLocation: OHIO, NEVADA

• Capacity at 48” load center 90,000 lb • GM 671 Detroit diesel • 9,870 hoursLocation: LOUISIANA



FOR SURPLUS EQUIPMENT CONTACT: Mark Griffith 513.367.8470 [email protected]

QUANTITY AIR TUGGERS, CHAIN HOISTS AND RIGGING PRICE10 Crosby 8 ½ Ton Shackles SPA-Galvanized $20

30 Crosby 8 ½ Ton Shackles SPA-Alloy $18

14 Crosby 6 ½ Ton Shackles SPA-Alloy $14

55 Crosby 4 ¾ Ton Shackles SPA-Alloy $9

207 Crosby 12 Ton Shackles SPA-Galvanized $38

15 Crosby 12 Ton Shackles SPA-Alloy $36

31 Crosby 13 ½ Ton Shackles SPA-Galvanized $56







18 Crosby 55 Ton Shackles Bolt-Galvanized $450

41 Crosby 85 Ton Shackles 3” Bolt-Galvanized $700

2 Crosby 120 Ton Shackles 3” Bolt-Galvanized $1,400

1995 clark gpx50forklift

2000 brodersonic200-2f carry deck crane

• 8000 lb capacity• GM V6 engineLocation: NEVADA

• 15 Ton capacity• Cummins dieselLocation: OHIO



34 www.fmmafco.com


2012 sullair 375 cfm dIEsel compressor

• 5500 hoursLocation: OHIO


Ingersoll Rand BU7A Air Tugger

• 1,000 lb capacity• (5) availableLocation: OHIO


2008 multiquip 100kw diesel generator

• 5500 hoursLocation: OHIO


Ingersoll Rand FA10 Air Tugger

• 22,000 lb capacity• (3) availableLocation: OHIO


Ingersoll Rand hul4o Air Tugger

• 4,000 lb capacityLocation: OHIO


general s17 beam clamp

• 25 TonLocation: OHIO

SPECIAL PRICE $900

general s4a beam clamp

• 10 TonLocation: OHIO

SPECIAL PRICE $450

boscaro man basket

• 4-man • (2) availableLocation: OHIO


21 Crosby 120 Ton Shackles 3 ½” Bolt-Galvanized $1,600

2 Crosby 150 Ton Shackles Bolt-Galvanized $1,900

1 Crosby 200 Ton Sling Saver Shackles Bolt-Galvanized $2,600

4 Crosby 125 Ton Sling Saver Shackles Bolt-Galvanized $1,200

2 Crosby 75 Ton Sling Saver Shackles Bolt-Galvanized $600

1 Crosby 35 Ton Sling Saver Shackle Bolt-Galvanized $200

56 Crosby 1 ¾”x 24” J&J Galvanized Turnbuckles $450

89 Crosby 1” x 24” E&E Galvanized Turnbuckles $100

3 Crosby 60 Ton 24” Snatch Blocks Single Sheave $4,800

2 Crosby 35 Ton 18” Snatch Blocks 2-Sheave $3,000

2 Crosby 15 Ton 14” Snatch Blocks 3-Sheave $1,600

8 Crosby 35 Ton 18“ Hook Blocks 2-Sheave $3,800

2 Crosby # EZE 30 Ton 14” Hook Blocks $2,000

2 Crosby # EZE 15 Ton 16” Hook Blocks $1,800

1 Crosby # 431 20 Ton 12” 1 1/8” Sgl. Snatch Block $750

12 Crosby 15 Ton 10” 5/8”-¾” Sgl. Snatch Blocks Unused $650

23 Crosby 15 Ton 8” 5/8”-¾” Sgl. Snatch Blocks Unused $600

2 Crosby 12 Ton 6” 5/8”-¾” 2-Sh. Snatch Blocks Unused $700

10 Crosby 12 Ton 6” 5/8”-¾” 2-Sh. Snatch Blocks Used $600

25 Crosby # 419 8 Ton 12” ¾” Sgl. Snatch Blocks $450

29 Crosby 8 Ton 8” 5/8”-¾” Sgl. Snatch Blocks $250

56 Crosby 8 Ton 6” ¾” Sgl. Snatch Blocks $225

7 Crosby 8 Ton 6” 5/8” Sgl. Snatch Blocks $200

300 CM/Coffing/Vanguard/Tractel/Jet 3 to 10 Ton Clamps P.O.R.

1 Renfroe # FR-3 3 Ton Plate Clamp $250

9 Renfroe # SCP 6 Ton Plate Clamps $450

2 Renfroe # TLA-6-A 6 Ton Plate Clamps $500

1 Sky Climber # 369000-W02 Man Basket (Unused) $3,000

1 Gantry Crane 1 Ton 10’ L x 12’ H Steel $3,000

13 Jergens Swivel Lifting Rings P.O.R.

2 Harrington # CB 20 Ton Chain Hoists with 30’ Lift $3,200




19 Harrington # CB 5 Ton Chain Hoists with 20’ Lift $850

10 Harrington # CF 5 Ton Chain Hoists with 40’ Lift $700









43 Harrington # CF ½ Ton Chain Hoists with 20’ Lift $120

13 Harrington # CF ½ Ton Chain Hoists with 30’ Lift $140

1 Harrington # LB 3 Ton Chain Puller with 15’ Lift $340





3 IR # FA10/97066 22,000# Long Drum Air Tuggers $32,000

7 IR # FA5A-LMX1 10,000# Long Drum Air Tuggers with Man. $17,500

3 IR # FA2B-LMX1 4000# Long Drum Air Tuggers with Manual Brakes (3rd Generation) $8,000

1 IR # FA2A-RMX1 4000# Long Drum Air Tuggers with Man. $7,250

4 IR # K5UL 5000# Long Drum Air Tuggers $9,000

14 IR # HUL-40 4000# Long Drum Air Tuggers $7,000

1 IR # K4U 4000# Short Drum Air Tugger $6,600


diesel welder2012 miller 500 amp

• Duetz dieselLocation: OHIO and ALABAMA


multiquip 6KW diesel generator

• Model DA7000SSA• (2) availableLocation: NEVADA


rigid 161 pipe threader

• 4” to 6” pipeLocation: NEVADA


ridgid 141 pipe threader

• 2 ½” to 4” pipeLocation: OHIO


Mcelroy 618 pipe fusion machine

• 6” thru 18” IPS• Kohler gas engineLocation: OHIO


greenlee 910 wire dispensing cart

• (18) availableLocation: OHIO

SPECIAL PRICE $600

greenlee 916 cable transport cart


SPECIAL PRICE $275

enerpac hydraulic torque wrench pump

• ZU4208BB-QMHR• (1) availableLocation: OHIO


1 IR # HU40 4000# Short Drum Air Tuggers $6,500

2 IR # HU 2500# Short Drum Air Tugger $4,600

2 IR # HUL 2500# Long Drum Air Tuggers $5,000

7 IR # BU7A 1000# Air Tuggers $3,000

1 IR # LS1500RGLC 3300# Air Tugger $3,000

2 IR # EUAB/PT 2000# Short Drum Air Tuggers Auto Brake $5,000

1 IR # EULAB 2000# Long Drum Air Tugger Auto Brake $4,000

20 General # S-12 15 Ton Girder Clamps 8”-18” Adj. (Unused) $750

4 General # S-18 28 Ton Girder Clamps 16”-24” Fixed $950




3 General # S-11 10 Ton Girder Clamps 3.5”-12” Adj. $400

32 General # S4A 10 Ton Girder Clamps 8”-18” Fixed $450

1 General # S6A 5 Ton Beam Clamps Fixed $325

82 General # S3A 5 Ton Beam Clamps Fixed $300

16 General # S-1 2 Ton Beam Clamps $100

9 General # USC-3A 3 Ton Super Clamps 6”-8” $400

1 General # USC-5 Super Clamp 0 - 12” $600

1 General # USC-4 Super Clamp 0 - 12” $450

QUANTITY RIDGID TOOLS/THREADING EQUIPMENT PRICE5 Ridgid # 535 2" Pipe Threaders (Old Style) $2,350

1 Ridgid # 1224 4" Pipe Threader $5,600

16 Ridgid # 700 Pipe Threaders $850

2 Ridgid # 12R 7Pc. ½" - 2" Die Head Set $350

400 Ridgid # 12R ½" - 2" Manual Die Heads P.O.R.

10 Ridgid # 161 4" - 6" Geared Head Threaders $1,800

21 Ridgid # 141 2 ½" - 4" Geared Head Threaders $1,200

31 Ridgid # 811A 2" Universal Die Heads $240

84 Ridgid # 811 2" Universal Die Heads $225

6 Ridgid # 418 Oilers $140

2 Ridgid # 318 Oilers $120

61 Ridgid 24" Steel Pipe Wrenches $34

82 Ridgid # 460 Tri-Stands $250

24 Ridgid # 450 Tri-Stands $225

8 Ridgid # 460 Knockoff Tri-Stands $180

21 Reed # R450 Tri-Stands $180

1 McElroy # 1236 12" to 36" Pipe Fusion Machine $70,000



14 Greenlee # 656 Reel Stands $325

60 Greenlee # 683 Reel Stands $175

2 Sumner # 70 Reel Stands (Same as 683) $150

2 Current # 670 Reel Stands (Same as 683) $150

2 Current # 660 Reel Stands (Same as 687) $85

5 Greenlee # 8018 18" Hanging Sheaves 8000# $300



29 Greenlee # 916 Reel Transporters $275

10 Greenlee # 668 Conduit Racks $350

3 Current # 505 Conduit Racks $325

18 Greenlee # 910 10-Wheel Wire Carts $600

5 Ensley # E-290 10-Wheel Wire Carts $550

QUANTITY GREENLEE TOOLS/BENDING EQUIPMENT PRICE3 Greenlee # 881 2 ½"-4" 2 Shot Hyd. Benders EMT/IMC/RIGID $6,500

2 Greenlee # 885 Hyd. Benders Rigid $2,650

3 Greenlee # 555R ½" -2" Mech. Benders Rigid (New Style) $3,250

1 Current # 77 ½" - 2" Mech. Bender Rigid $2,750

3 Greenlee # 1818 ½" x 1 ½" Manual Benders $1,450


36 www.fmmafco.com

water wagon 500 gallon

diesel welder2012 miller 500 amp

• With gas power pumpLocation: NEVADA


2012 wancosolar light towers

• (3) availableLocation: OHIO and ALABAMA


lincoln invertec v350pro

• 2007 • 6 pack Location: OHIO


2009 esab esp150 plasma cutter

• 2” capacity• (3) availableLocation: OHIO


2012 lincoln flextec 450

• 6 pack • (2) availableLocation: OHIO


enerpac 300 ton hydraulic cylinder

• 6” stroke• Double actingLocation: OHIO


enerpac 400 ton hydraulic cylinder

• 6” stroke• Tilting saddlesLocation: OHIO


4 Greenlee # 1801 1 ¼" - 2" Manual Benders $750

6 Greenlee # 1800 ½" - 1" Manual Benders $750

3 Current # 750 ½" - 1" Manual Benders $700

5 Greenlee # 1800 ½" - 1" Manual Benders (Old Style) $600

6 Greenlee # 1813 Bending Tables (881/881CT) $1,300

1 Greenlee # 1802 Bending Tables (885/884) $1,000

4 Greenlee # 980 Hyd. Pumps $1,600



1 Greenlee 2" # 555 EMT Shoes $400

1 Greenlee 1 ½" # 555 EMT Shoe $350

7 Greenlee ½" - 1 ¼" # 555 EMT Shoes $375

1 Greenlee 1 ½" - 2" # 555 Rigid Shoes $650

8 Greenlee ½" - 1 ¼" 555 Rigid Shoes (Old Style) $325

2 Greenlee # 6805 8000# Pulling Package $4,850

2 Greenlee # 6800 8000# Pullers $2,500

4 Greenlee # 6810 Ultra Cable Feeders $4,500

5 Greenlee # 870 Wheeled Transporters (For Pulling Pkg.) $500

6 Greenlee # 7506 2" SS Hyd. Knockout Sets $950

2 Greenlee # 7310SB 4" Hyd. Knockout Set $850

3 Greenlee # 7310 4" Hyd. Knockout Sets $800

1 Greenlee # 7306 ½" - 2" Knockout Set $525

2 Greenlee # 7646 Hyd. Punch and Rams $400

11 Greenlee # 746 Hyd. Rams $225

QUANTITY WELDING EQUIPMENT AND SUPPLIES PRICE3 Miller # 304P Invision Inverters (1998-1997) $800

2 Lincoln Multiprocess Flextec # 450 6-Pack Welder (2012) $16,000

1 Lincoln Multiprocess Flextec # 450 6-Pack Welder (2011) $16,000

3 Lincoln Multi Invertec # V350 PRO 6-Pack Welder (2007) $12,500

5 Miller # Pipe Pro 450 FC Elec. Welders (2008-2007) $3,000

1 Miller # 652 Dimension Elec. Welder (2007) $2,400

3 Lincoln # DC600 Elec. Welders (1994 to 2005) P.O.R.

3 Miller # 12RC Pipe Pro Wire Feeders (2008-2009) $850

2 Miller # 12RC Suitcase Wire Feeder without Meter (2006) $650

1 Miller S-60 Wire Feeder (2000) $300

2 Lincoln # LN25 Wire Feeders (1999) $850

490# Esab # E8018-B6 3/32" Welding Electrodes 5.00#

5000# Esab #E9015-B9 3/32" Welding Electrodes 10.00#

2450# Esab # E9018-B3 3/32" Welding Electrodes 3.70#

2100# Esab # E71T 8 Wire 1/16" x 25# Spools 3.50#

2 H&M # 2C-30 26"-30" Pipe Bevelers $4,000

1 H&M # HM01 3"-8" Pipe Beveler $800

28 Miller 50' 24 Volt Extension Cords (Unused) $175

91 Miller 50' 24 Volt Extension Cords (Used) $120

1 Proweld (Arc) # 1850 Stud Welder with Gun $2,500

1 Nelson TRW # TR450B Stud Welder with Gun $1,400

3 Esab # ESP-150 2" Cut Plasma Cutters with Torch (2009) $8,500

1 Esab PCM-750I Plasma Cutter $1,400

2 Keen # K4RSM 4-16" with 60# Cap. Spools Rod Oven $1,000

9 Phoenix 300# Rod Ovens $600

2 Phoenix Type 2 20# Rod Ovens $185

11 Phoenix Type 1 10# Rod Ovens $120

12 Phoenix # 10B 10# Rod Ovens $100

5 Anthony # 86U 10" Sgl. Tank Bottle Cart with Swivel Back Wheels $300

8 Anthony # 94LFW-16S Bottle Carts Dual Tank Solid Tire with Divider and Fire Wall (No Tool Box) $300

16 Anthony # 84LFW-16 Bottle Carts Dual TankSolid Tire with Divider and Fire Wall (No Tool Box) $250

14 Piranha III # DGP-3 Tungsten Grinders $750

3 Piranha II # DGP-2 Tungsten Grinders $400


greenlee 910 wire dispensing cart

2012 wanco speed warning sign

• Solar powered• (2) availableLocation: OHIO


enerpac hydraulic torque wrench pump


hanson air receiving tank

• 240 gallon• (2) availableLocation: OHIO


greenleepipe cart


SPECIAL PRICE $325

Material Basket heavy duty offshore

• 4’ x 8’ galvanized• (5) availableLocation: OHIO


skyclimber work cage

• Model 369000-W02• 1250 lb capacityLocation: OHIO


multiquipconcrete trowel

• Model BA48H• 11hp Honda engineLocation: OHIO


enerpac 10 gallon hydraulic pump

• ZE5340SJ-GU10• Pendant controlLocation: OHIO


sure flame s1505 construction heater

• 1,500,000 BTU max.• Propane or natural gasLocation: OHIO


mathey dearman d235 double jackscrew

• Pipe chain clamp • For 10” thru 36” pipeLocation: NEVADA


QUANTITY GANG BOXES, HOPPERS AND BASKETS PRICE9 Knaack # 119 Forman's Boxes (2nd Generation) $1,150

28 Knaack # 129 2-Door Utility Cabinets $850

11 Knaack # 109 2-Door Cabinets $750

15 Knaack # 4830 Gang Boxes $350

129 Knaack # 60 Gang Boxes (AS--IS) $200

6 Delta # 1-674990 Forman's Boxes (3rd Generation) $1,300

2 Delta # 698990 2-Dr. Cabinets $850

7 Greenlee # 2072 2-Door Cabinets 72" W $850

4 Greenlee # 5760 2-Door Cabinets $750

5 Greenlee # 5860 Bi-Fold Cabinet $900

1 Vestil # D-300-LD Dump Hoppers 3 Cu. Yd. $900

4 Vestil # D-200 Dump Hoppers 2 Cu. Yd. $700

5 Off Shore 4'x8' HD Galvanized Baskets $1,200

1 Steel Container 8'x20' $2,250

6 Sumner # ST-401 Grasshopper Pipe Carts $500

11 Greenlee 2-Wheel V-Carts $325

1 Sumner 5-Leg Max Jack V-Head Pipe Stands $320

4 Sumner 4-Leg Max Jack V-Head Pipe Stands $290

3 Ridgid # RJ99 3-Leg Roller Head Pipe Stands $55

23 Ridgid # VJ99 3-Leg V-Head Pipe Stands $50

18 Ridgid 4-Leg Adjustable Roller Pipe Stands $85

7 Sumner # ST801 3-Leg V- Head Pipe Stands $45

40 B&B 4-Leg 2500# V-Head Pipe Stands $75

42 B&B 3-Leg V-Head Pipe Stands $35

6 Dearman # D235 10" to 36" Pipe Line Up Clamps $1,200

25 CEP # 6506-S 50 Amp Buzz Temp. Power Boxes $250

10 CEP # 6506-GU 50 Amp Buzz Temp. Power Boxes $250

10 Erickson # 1066FS 50 Amp Buzz Temp. Power Boxes $250

9 Coleman # 01970 50 Amp Buzz Temp. Power Boxes $250

8 Sure Flame # S1505 1.5 Million BTU LP/Gas Heaters $2,600

QUANTITY HYDRAULIC RAMS, CYLINDERS AND PUMPS PRICE

44 Enerpac # CLSG-4006 400 Ton Rams with 6" Stroke and Tilting Saddles Single Acting $4,800

8 Enerpac # CLRG-3006 300 Ton Rams with 6" Stroke Dbl. $4,000

2 Enerpac # CLL1004 100 Ton 4" Stroke Rams $900

8 Enerpac # RC2514 25 ton Ram with 14" Stroke $650

4 Power Team # C10010C 100 Ton Ram with 10" Stroke $1,200

4 Power Team # C756C 75 Ton Ram with 6" Stroke $1,050

2 Power Team # RD556 55 Ton with 6" Stroke D/A Hollow $700

8 Power Team # C556C 55 Ton Ram with 6" Stroke $600

32 Simplex # R1012 10 Ton Rams with 12" Stroke $300

8 BVA # H2514 25 Ton Ram with 14" Stroke $400

6 Enerpac # ZE5 Elec. Hyd. Pumps $6,500

1 Enerpac # ZU4 Elec. Hyd. Pumps $5,000

5 Enerpac # P80 Hyd. Hand Pumps $310

7 Enerpac # P39 Hyd. Hand Pumps $185

13 Power Team # P59 Hyd. Hand Pump $230

1 Power Team # P55 Hyd. Hand Pumps $175

4 Enerpac # FSH-14 Hyd. Spreader Duck Bills $1,800

2 Enerpac # WR-5 1 Ton Hyd. Spreader Duck Bills $95

QUANTITY POWER AND ELECTRIC TOOLS PRICE48 Milwaukee # 6130-33 4 ½" Elec. Angle Grinders $40

21 Milwaukee # 6147-30 4 ½" Elec. Angle Grinders $55

2000+ Combination Wrenches Up to 3" P.O.R.

250+ Slugging Wrenches Up to 4" P.O.R.

1 Lejuene # SR71E Elec. Torq Gun $1,200

1 Lejuene # S121E Elec. Torq Gun 7/8" $2,650

1 Enerpac # S6000 1 ½" 6010 FT/LB Torque Wrench Head $4,000

4 Enerpac # S3000 1" 3200 FT/LB Torque Wrench Head $3,500


38 www.fmmafco.com

A.I. FriedmannRobert McKenna, Sr.

Shareholders: Dan McKenna, Pat McKenna, Greg Friedmann, Bob McKenna, Jr.,

and Bill McKenna

Some original supplies Employees with 25+ years of service

Corporate Headquarters in Harrison, Ohio

F&M Supply, Inc., 1945

Race Street Location, 1950

A.C. Friedmann

F&M Supply, Inc. was founded in 1945 by A.I. Friedmann and his son-in-law Robert McKenna, Sr. Together they sold war surplus materials, which included bar soap and balloons. They set up their “office” in the Friedmann family garage in the Cincinnati, Ohio suburb of Price Hill. In 1950, the company moved to 1820 Race Street in downtown Cincinnati.

In 1952, A.C. Friedmann, A.I. Friedmann’s son, returned home from Germany serving in the Army. He joined the company full time and they ventually they started selling tools and supplies. In 1963, MAFCO Equipment Co. was formed as the equipment rental arm of F&M Supply, Inc.

After several company relocations in the 1950’s, the trio moved the company to 3825 Race Road in 1963. They remained there until November 1980 when they relocated to the current corporate headquarters in Harrison, Ohio. On May 31st, 1991, F&M Supply, Inc. and MAFCO Equipment Co. merged to become F&M MAFCO, Inc. Today F&M MAFCO, Inc. consists of 246 employees with branch locations across North America and around the world. As we recently celebrated our 70th anniversary some things have not changed. F&M MAFCO, Inc. is still family owned and operated with a commitment to providing “Powerful Solutions” for our customers and creating long term relationships.

70 powerful years it all started in 1945...


Headquarters9149 Dry Fork RoadHarrison, OH 45030

U.S. BranchesCincinnati, Ohio Birmingham (Pelham), AlabamaCarson City (Mound House), NevadaCharlotte (Concord), North CarolinaHouma, Louisiana

Canadian BranchEdmonton, AB Canada

International OfficesCambridge (Bury St. Edmunds), UK

St. Croix, USVI

F&M MAFCO has been providing tools and equipment since 1945. We specialize in heavy rigging, cranes and crane parts, crane rental, on-site tooling, construction tools and supplies, welding equipment, fabrication, safety equipment, hoist, derricks, and other unique items

that may be difficult to find from a single provider.

Mailing AddressP.O. Box 11013Cincinnati, OH 45241

Toll-Free 1.800.333.2151 World-Wide 1.513.367.2151

Fax 1.513.367.0363

TOLL-FREE 1.800.333.2151 WORLD-WIDE 1.513.367.2151

WWW.FMMAFCO.COMCONSTRUCTION TOOLS • EQUIPMENT • WELDING CRANES • INDUSTRIAL GASES AND SUPPLIESCINCINNATI, OH • BIRMINGHAM, AL • CARSON CITY, NV • CHARLOTTE, NC • HOUMA, LA • EDMONTON, AB CANADA • CAMBRIDGE, UK

WIN A MANITOWOC

4100 DIE CAST MODEL CRANE

See page 3 for details.

FMM10

Sales • Service • Rental • Parts...Since 1945Sales • Service • Rental • Parts...Since 1945

upgrade your crane with the new - f&m mafcoupgrade your crane with the new ergonomic design •...

Documents