FABR

ICAT

ION C

OMPO

NENT

SOBD1 CATALYTIC CONVERTERS

Part No.

Inlet / Outlet

Converter Body O.D.

Overall Length

7000 2” 5 1/4” 12"

7001 2 1/4” 5 1/4” 13”

7038 2 1/2” 5 1/4” 13”

7039 3” 5 1/4” 13”

Part No. Inlet/Outlet Converter Body O.D. Overall Length

7100 2 1/4” 4” 10"

7101 2 1/2” 4" 10”

7102 3” 4” 10”

Please Note: Aftermarket converters are only permitted if your vehicle does not have a converter or if a government emissions testing program has determined that the existing converter needs replacement. It is prohibited by law in the United States and Canada to remove a properly functioning catalytic converter.

UNIVERSAL CERAMIC CORE CATALYTIC CONVERTERS Vibrant Performance Ceramic Core Catalytic Converters feature a substrate that flows more freely than a typical stock converter, thereby improving horsepower by reducing back pressure while still meeting E.P.A. requirements for OBD1 vehicles (49 State).

The shell is constructed from Stainless Steel and is covered by a 5 year / 50,000 mile warranty (warranty applicable to shell only).

UNIVERSAL METAL CORE CATALYTIC CONVERTERS Vibrant Performance Metal Core Catalytic Converters are made entirely of Stainless Steel and feature a Monolith that is far more durable and capable of withstanding higher operating temperatures than a traditional ceramic catalyst. Enjoy up to a 40% improvement in exhaust gas flow over a typical ceramic core converter.

These Converters are covered by a 5 year / 50,000 mile warranty (warranty applicable to outer shell only).

E.P.A. approved for OBD1 only (49 State only).

For use on engines up to 5.0L.

IMPORTANT: These Catalytic Converters are not for use on vehicles registered in California as a result of California Vehicle Code Sec. 27156 and 38391.

Vibrant Universal Metal Core Race Converters feature an ultra high flow, 200 cell per square inch catalyst flowing at 578 CFM.

Round ceramic core converters

Oval ceramic core converters

TECH TIP

An overly rich Air/Fuel ratio (i.e. 11.5:1 or lower) or operating temperatures exceeding 1200 degrees can cause premature catalytic converter failure, voiding the warranty.

IMPORTANT: These Catalytic Converters are not for use on vehicles registered in California as a result of California Vehicle Code Sec. 27156 and 38391.

The Catalytic Converters on this page are suitable for OBD1 vehicles only (1995 or older), excluding those registered in California.

Part No.

Inlet / Outlet

Converter Body Dimensions

Overall Length

7002 2” 6 1/4” x 4" 13"

7003 2 1/4” 6 1/4” x 4" 13”

7013 2 1/2” 6 1/4” x 4" 13”

7029 3” 6 1/4” x 4" 16”

FABRICATION COMPONENTS

THE SOURCE FOR PROFESSIONAL FABRICATION COMPONENTS

HIGH PERFORMANCE UNIVERSAL CATALYTIC CONVERTERS BY GESI ®Say goodbye to Converter Failures, Check Engine Lights and failed emissions tests on your high performance vehicle.

Vibrant Performance and Global Emissions Systems Inc. (GESi®) have teamed up to supply a series of OBD2 (1996 and newer) high flow Catalytic Converters that provide peace of mind and reliability under extreme conditions while providing highly effective long term emission control solutions.

GESi® is a recognized global leader in the design, engineering and productionof emission control systems for all types of fuel burning engines, whether it be spark, rotary or compression. Their technology has been proven effective on engines that burn all varieties of commercial fuels, including gasoline, propane, natural gas, diesel and bio-diesel.

For the automotive sector, GESi® possesses proprietary emissions reduction technology that sets their Catalytic Converters apart and offers a solution to owners of high performance vehicles who simply cannot find Catalytic Converters capable of consistently surviving the extreme conditions that those engines create.

GESI ® HIGH OUTPUT AND ULTRA HIGH OUTPUT UNIVERSAL OBD2 COMPLIANT CATALYTIC CONVERTERSGESi® High Output (HO-series) and Ultra High Output (UHO-series) Universal Catalytic Converters provide a reliable solution to the most common Converter problems experienced by owners of high performance vehicles.

• EPA certified for use on OBD2 vehicles (1996 and newer) in jurisdictionswhere the installation of Universal Catalytic Converters is still permitted(check with local authorities before installation).

• Full stainless steel construction, including the Substrate which isfurnace braised to the mantle for outstanding, unparalled durability.

• Unique end-cap design locks substrate into place. No More Rattling!• GESi® has proprietary precious metal loading technology that ensures

greatly reduced emissions, eliminating almost all CEL issues.• Capable of withstanding up to 1500º F.• Ideal for forced induction applications, with virtually no loss of

exhaust flow (less than 1% flow degredation).• Covered by a 5 year / 50,000 mile warranty (on shell and tube ends only)• These are the best high flow Catalytic Converters money can buy.

HO-series Catalytic Converters (rated for 350-500HP)

UHO-series Catalytic Converters (rated for 500-850HP)

These are typical emissions test results enjoyed by owners of high performance vehicles who run GESi® Catalytic Converters

GESI ® UNIVERSAL CERAMIC CORE CATALYTIC CONVERTERSGESi® Ceramic Core High Flow Catalytic Converters feature the same precious metal loading technology incorporated into the High Output Metal Core Converters and the large, high flowing Ceramic Honeycomb Catalyst performs significantly better than a typical stock Converter and will put an end to most “Check Engine Light” problems.

The external shell features full stainless steel construction, including a mirror polished heat shield. Covered by a 5 year / 50,000 mile warranty (on shell and tube ends only).

Part No. Inlet/Outlet Dimensions

7225 2 1/2” 7 1/4” x 3 3/4” oval, 12” Body Length (18” overall length)

7230 3” 7 1/4” x 3 3/4” oval, 12” Body Length (18” overall length)Please note: These catalytic converters are not legal for use on vehicles registered in California as a result of California Vehicle Code Sec. 27156 and 38391.

The GESI® sponsored Team Go Green Pro-Mod Camaro

VEHICLE EMISSIONS INSPECTION REPORT

Overall Result Emissions

Evaporative Systems

Equipment Inspection Smoke

OBD Codes

PASS PASS PASS PASS PASS PASS

Part No.

Inlet / Outlet

Converter Body O.D.

Overall Length

7525 2 1/2” 4” 7"

7530 3” 4” 7”

Part No.

Inlet / Outlet

Converter Body O.D.

Overall Length

7830 3” 4 1/2” 7 1/2"

7840 4” 4 1/2” 7 1/2”

EMISSIONS TEST INFORMATION

READINGS LIMITS RESULTS

HC GPM 0.0430 1.200 PASS

CO GPM 0.540 15.000 PASS

NOx GPM 0.059 1.5000 PASS

Check Engine Light PASS