universal contacts for smart wearable applications contacts for smart wearable applications the...
TRANSCRIPT
Universal Contacts for Smart Wearable Applications
The challengeConnectivity inside a compact size smart wearable device such as wristband and smart watch is a challenge to hardware design engineers. As the space is limited and the circuitry amperage is extremely low, a unique small form-factor pressure contact with low contact resistance is required.
The solutionITT’s Universal Contact series is a singular stamped and formed interconnect which exhibits over 0.3N contact force with only 0.1mm of deflection. The innovative “pre-load” design results in superior hertz forces producing low contact resistance ensuring clear and stable connectivity. Coupled with 300k PSI and a defined wiping action when deflected, the Universal Contact provides the ultimate dry circuit pressure contact for smart wearable devices, applications being battery, grounding and antenna pick-up interconnects.
Attributes & values• The innovative “pre-load” tabs provide 0.3N contact force
with 0.1mm of deflection • TiCu materials, providing a contact resistance of < 20 milli
ohms thereby ensuring uninterrupted device functionality• Solder well, prevents flux and paste from working into the
critical deflection area
© 2015 ITT Corporation, Inc.ITT Cannon UC Smart Wearable AN 032015
The “ITT Engineered Blocks“ symbol, “Engineered for life”, “ITT” and “Cannon“are registered trademarks of ITT Corporation. Specification and other data are based on information available at the time of printing, and are subject to change without notice.
North America & EuropeTed Worroll100 New Wood RoadWatertown, CT 06795Phone: 1.860.945.8274E-mail: [email protected]
Connect with your ITT Interconnect Solutions representative today or visit us at www.ittcannon.com
AsiaTeddy ChanUnit 2405-6, 24/F, FWD Financial Centre, 308 Des Voeux Road Central, Hong Kong Phone: +852.25895830E-mail: [email protected]
Universal Contact, a dry circuit pressure contact solution for a compact smart wearable device.
• Robust design with “side wings” protect the moving beam and prevent the beam from being over-stressed and damaged along with anti lift during the assembly process
Applications•Healthcare•Smart Phone•LED lighting•Tablet Computer•Bar Code Scanners•Vehicle Keyfob•POS devices
•Smart Wearable Devices•Set Top Boxes•GPS Units•Security Devices•Military Radio
♥
The CANNON Difference:•No known field failures with over 4 billion contacts in the field•Freedom of board positioning•Environmentally safe with Beryllium free alloys•Manufacturing forgiveness – tolerance stack up•Allows for low profile device creation