united rentals tool solutions catalog tool catalog... · united rentals tool solutions catalog ......

United RentalsTool Solutions Catalog

UnitedRentals.com | 800.UR.RENTS© 2017 United Rentals, Inc.

38363_UR 2017_00_FC_BC_Tools.indd 1 4/4/17 10:38 AM

Tool SolutionsProducts

38363_UR 2017_00_IFC-IBC.indd 1 4/4/17 3:43 PM

1Rent now at UnitedRentals.com/equipment

Cooling, Ventilation & Vacuum ........... 2-3Air Horns .....................................................2Blowers ................................................... 2-3Cooling Fans ...............................................2Cooling Trailers ...........................................2Vacuums .....................................................3

Air Tools ................................................ 4-7Texas Pneumatic Ventilation Fans..............4Air Impact Wrenches...................................4Air Hack Saws.............................................5Air Drill.........................................................5Air Grinders .................................................5Air Die Grinders...........................................5Scabblers ....................................................5Air Manifolds & Receivers...........................6Compressor Air Hose..................................6Needle Scaler..............................................7Air Breakers.................................................7Rock Drills ...................................................7Rivet Busters...............................................7Backfill Tamper ...........................................7Clay & Trench Diggers ................................7

Boiler Tools...............................................8Milling Guns ................................................8

Electrician Tools................................. 9-14Conduit Benders .........................................9Electricians Cable Pullers ...........................9Benders.....................................................10Tuggers .....................................................11Cable Feeder.............................................11Reel Jacks...........................................11, 13Cable Rollers.............................................12Sheaves.....................................................12Tray Rollers ...............................................13Wire Reel Dispensers................................13Fish Tape ..................................................13Crimpers & Die Sets..................................14

Punches...................................................15

Hoisting ............................................. 16-18Chain Hoists........................................16, 18Lever Hoist ................................................17Beam Clamp .............................................17Beam Trollies ............................................18Snatch Blocks...........................................18Shackles....................................................18Roustabouts..............................................18

Hoisting & Tuggers.................................19Hydraulic Jack/Dolly .................................19Tuggers .....................................................19Pipe Dolly ..................................................19

Jacks & Lifts ...........................................20Max Jacks.................................................20Roll Jacks..................................................20A-Roll Jacks..............................................20V-Head Jacks............................................20Porta Powers ............................................20Machine Skates ........................................20Hand Hydraulic Pump...............................20Bottle Jacks ..............................................20

Piping................................................. 21-25Flange Spreaders......................................24Hydrostatic Test Pump Air........................21Geared Threader .......................................21Threading Machines..................................21Pit Bull .......................................................22Rolling Unit................................................22Track Unit..................................................22Pipe Threader............................................23Pipe Line Up Clamps ................................23Gear Head.................................................23Pipe Cutters ........................................ 23-24Pipe Vise Stand.........................................23Bench Pipe Vises ......................................24Pipe Jeep Meters......................................24Hydraulic Pipe Crimper.............................24Roll Groovers ............................................25

Mobile Tool Room & Pro-Boxes ..... 26-29Mobile Tools Room...................................27Pro-Box.....................................................27Electicians’s Pro-Box Sample Tool List 28Pro-Box Options .......................................28Sockets and Wrenches.............................28Pliers, Clamps and Cutting .......................29Screw Drivers, Nut Drivers & Hex Keys....29Striking & Struck .......................................29

Torquing ............................................ 30-31Hydraulic Air Pump ...................................30Electric Powered Hydraulic Pump............30Hydraulic Torque Wrench Hose................30Torque Wrenches................................30, 31Torque Gun ...............................................30Ratchet Link ..............................................31Wrenches ..................................................31

Welding.............................................. 32-37Portable Weld Fume Extraction Unit ........32Portable Welding Fume Extractor.............32Welding Fume Extraction Base Unit ........32Welders .....................................................32Pulse Mig Gun...........................................33Plasma Cutters..........................................33Welding Lead ............................................33Wire Feeder...............................................33Propane Welders ......................................34Stick Welders ............................................34Tig Welder .................................................34Welding Remote ......................................35Oxygen/Acetylene Carts ...........................35MIG Welders .............................................35Welding Rod Ovens ..................................35Engine Driven Welders........................ 36-37Compact Welding and

Power Generator...................................37Heavy-Duty Welders .................................37

Pipe Beveling ..........................................38Hydratight..................................................38Welding Accessories.................................38

Air Compressors .............................. 39-41Heavy Duty Electric Powered

Air Compressor.....................................39Gas Powered Air Compressors ................39Portable Air Compressors.........................40Air Compressors .......................................41

Sanders & Grinders ................................42Angle Grinders & Sanders ........................42Hand Sanders ...........................................42Belt Sanders..............................................42

Saws .................................................. 43-44Reciprocating Saws ..................................43Band Saws................................................43Cutoff Machines.................................. 43-44Circular Saw..............................................44Jig Saw .....................................................44Tile Saw.....................................................44Worm Drive Saw .......................................44

Lighting....................................................45Explosion Proof Lighting...........................45Fluorescent Lights.....................................45Vapor Proof Drop Lights ...........................45Mechanical Drop Lights ............................45String Lights..............................................45LED String Lights.....................................45Magnetic Lights .......................................45

Halogen Lights ..........................................45Explosion Proof String Lights ..................45

Drills................................................... 46-47VSR Drill ....................................................46Right Angle Drill ........................................46Cordless Drill.............................................46Stud & Joist Drill .......................................46Electric Drill ...............................................46VSR Screwdriver .......................................46Shears .......................................................46Nibblers.....................................................46Impact Wrenches......................................46Cordless Impacts......................................47Table Grinder ............................................47Die Grinder ................................................47Rotary Hammer.........................................47Concrete Vibrators ....................................47

Core Drills ...............................................48

Magnetic Drills.................................. 49-50Magnetic Base Drills .................................49Carbide Magnetic Drill .............................50Slugger JHM Drill ......................................50

Rotary Hammers ....................................51Spline Rotary/Demo Hammer...................51Demolition Hammer ..................................51Rotary Hammers .......................................51Combination Hammers .............................51Hammer Drill .............................................51Breaker Hammer Kit .................................51

Rock Splitters and Breakers .................52Breakers ....................................................52Combihammer ..........................................52

Gantry Crane...........................................53EME Aluminum Gantry Cranes .................53

TABLE OF CONTENTS

38363_UR 2017_01-56_Tools.indd 1 4/12/17 9:52 AM

2 Call for current rates: 800.UR.RENTS (800-877-3687)

Tools / Cooling, Ventilation & Vacuum

Cooling TrailersCat. Class: 920-5230

BDMC36CAir Horns EMC48B

CA24APE

Type Model Intake Weight Max psi Cat. Class

Axial Blower Allegro 8" 16 lbs. 115V 250-0995

Axial Blower Allegro 12" 28 lbs. 115V-230V 250-1000

Air Horn TexasPneumatic

3" 10 lbs. 40 - 100 250-1526


6" 25 lbs. 40 - 100 250-1529


8" 36 lbs. 40 - 100 250-1551


10" 43 lbs. 40 - 100 250-1570

Floor Fan BDMC36C 36" 116 lbs. — 250-1710

Floor Fan EMC48B 48" 165 lbs. — 250-2205

Floor Fan CA24APE 24" 82 lbs. — 250-2030

Evaporating Cooling Fans

Intake WaterReservoir

CoolingCapacity

Weight Speeds Cat. Class

16" 42 gallons 900 sq. ft. 130 lbs. 3 250-2208

24" 14 gallon 1800 sq .ft. 155 lbs. Variable 250-2213

36" 32 gallons 2500 sq .ft. 195 lbs. 1 250-2213

48" 40 gallons 4000 sq .ft. 345 lbs. 2 250-2210

Axial Blowers

38363_UR 2017_01-53_Tools.indd 2 3/14/17 10:48 AM


Tools / Cooling, Ventilation & Vacuum

9525-50EX 9525-50 Industrial Fan UB12E

Type Model Manufacturer Diameter CFM Cat. Class

Explosion Proof Blower 9525-50EX Allegro 20" 6837 250-2058

Non-Explosion Proof Blower 9525-50 Allegro 20" 7500 250-1013

Industrial Fan RAM I-30 Coenco 30" 13,000 250-2165

Explosion Resistant Blower 175 CV Coppus 8" 1500 250-1010

Explosion Resistant Blower UB12E Sure Flame 12" 2900 250-2064

Hepa Vacuums Shop Vacuums Turbo Vacuums

Type Brand Water Lift Water Capacity CFM Cat. Class

Hepa Vacuum Hilti VC 40 — 6.6 gals. 129 220-9810

Shop Vacuum MB-1300-OMEV 111" 13.0 gals. 108 220-9027

Turbo Vacuum Tornado 98451 239" 55 gals. 258 220-9030

38363_UR 2017_01-53_Tools.indd 3 3/14/17 10:48 AM


Chicago Pneumatic AirImpact WrenchesThe use of the latest technologies and materials,such as composite housing or steel housing for thetoughest materials, makes CP Industrial impacts thebest in each class. Our versatile line features differentclutches. The ranges provides impact from 3/8" to1-1/2" square drive sizes.

Model CP6500RSR

CP6060-SASAB

CP6060SASAK

CP0611PASED

CP6110PASEL

CP6120PASED

CP722 CP6120PASEL

Drive In 1/2" 3/4" 1" 1" #5 Spline 1-1/2" 3/8" 1-1/2"(#5 Spline)

Socket Retainer FrictionRing

Hole Hole Hole Integral Hole FrictionRing

Integral

Clutch Type Double-Dog

2-Jaw 2-Jaw 2-Jaw 2-Jaw 2-Jaw RockingDog

2-Jaw

Handle Style Pistol Pistol Pistol D Outside D InsideTrigger

D InsideTrigger

Butterfly D InsideTrigger

Torque Working(ft. lbs.)

360 650 650 900-1800 900-1800 2000 65 2000

Torque Max(ft. lbs.)

525 1000 1000 2800 2800 3500 90 3500

Air Flow (cfm) 25 59 59 48 85 95 13 95

Air Inlet 1/4 3/8 3/8 1/2 1/2 1/2 1/4 1/2

Cat. Class 110-1360 110-1370 110-1383 110-1380 110-1382 110-1385 110-1350 110-0015

Ingersoll RandAir Impact Wrench 2-1/2"The 588A1 is an impact tool like no other, having beendesigned expressly for the installation, assembly andmaintenance of extra heavy or high pressure equipmentwhere nuts must be applied or removed on bolts from 2" to4" in diameter. Typical applications are in steel mills, powerstations, oil refineries, chemical plants, shipyards and steamturbine manufacturing.

Model 588

Cat. Class 110-1390

Texas Pneumatic Ventilation Fans• Air Blower Pneumatic Fan

Model TXJF20 TXJF24

Bolt Circle Diameter 20" 24"

Weight 95 lbs. 132 lbs.

Inlet 3/4" 1"

Max psi 110 110

Cat. Class 250-0001 250-2105

Tools / Air Tools

38363_UR 2017_01-53_Tools.indd 4 3/14/17 10:48 AM

5

Tools / Air Tools

Rent now at UnitedRentals.com/equipment

Air Grinders• Powerful 1.25hp (950W) high performance motor for fast

metal removal• Aluminum alloy housing is rugged, yet lightweight• Spiral bevel gearing in angle head provides extended life and

smooth low vibration• Excellent for weld preparation and smoothing, rust removal,

deburring and blending of steel, cast iron and aluminum

Disc Cat. Class

4" 110-1253

4-1/2" 110-0008

7" 110-0009

Air Die Grinders• General Maintenance application die grinder• Productivity and control• Excellent for cleaning tires, moldings, porting, relieving

engines, and general high-speed polishing and grinding

Chuck Cat. Class

Angle 110-1240

Straight 110-1250

Air Hack Saws• 8"-37" Blades

Cat. Class: 625-0628

Clamps Cat. Class

Small 628-0007

Large 625-0006

Air DrillIndustrial maintenance duty anddesigned for smooth operation andextended tool life ideal tool for alltypes of maintenance work.

Chuck Cat. Class

3/8" 110-1274

1/2" 110-1276

Scabblers• Removing spalled or deteriorated concrete• Roughening surfaces for new overlayments• Reducing high spots or leveling uneven joints• Creating wheelchair access ramps• Sidewalk trip hazard repair• Removing epoxy• Creating slip-resistant surfaces• Texturing parking garage ramps• Breaking up ceramic tile

Heads Cat. Class

3-head 110-1150

5-head 110-1170

5 Head

3 Head

Tools / Air Tools

38363_UR 2017_01-56_Tools.indd 5 4/12/17 12:47 PM


Tools / Air Tools

Size Hose Length Cat. Class

3/8" 50' 110-2250

1/2" 50' 110-2355

3/4" 50' 110-2400

2" 25' 110-3726

2" 50' 110-3727

Air Manifolds & ReceiversCan be used in any industry where there is a need to havemultiple outlets of air to supply various pneumatic toolssimultaneously.

Tank Volume Cat. Class

10 gal. 110-3340

60 gal. 110-1360

120 gal. 110-3630

240 gal. 110-3635

620 gal. 110-3640

Compressor Air Hose

38363_UR 2017_01-53_Tools.indd 6 3/14/17 10:48 AM


115Rock Drill

Model Number 307 133 1133 650 131 5201 5203

Manufacturer APT APT APT APT APT APT APT

Weight (lbs.) 6.7 30 33 14 37 31 37

Length 18-1/2" 22-1/2" 25-1/2" 15-1/4" 51-7/8" 22-1/2" 31"

CFM @ 90 psi 7 42-46 48-52 33-35 38-42 34-36 34-38

Blows per Minute 4000 1140 850 1650 670 1850 1850

Cat. Class 110-1342 110-0013 110-1640 110-1100 110-1830 110-1130 110-1136

307 Needle ScalerThe APT Model 307 Needle Scaler is a hard working tool that will clean irregularsurfaces and also remove rust, paint and other coatings from metal. Its 19, 7"long needles are also versatile enough to peen welded joints and remove slag, aswell as, clean castings, chip stone, concrete and brickwork.

Air BreakersAmerican Pneumatic Models 117, 140, 160 & 190

Tough and dependable, the high performance line of pneumatic breakers. All are designedfor best performance in their class and handle a variety of jobs from general demolition toroad building and foundation removal.

Rock DrillsAmerican Pneumatic Models 115, 137 & 155

APT rock drills are tough, versatile and dependable. Various models for fit you specificrequirements. The APT Model 109 and Model 115 are lightweight tools for drilling holesfor anchor bolts and small dowel hole drilling. The Model 137 and Model 155 are used forgeneral construction, utility work and plant maintenance. They are designed for drillingthrough granite, hard faced rock, quarry drilling and drilling secondary holes for blasting.

Rivet BustersAmerican Pneumatic Models 133 & 1133

They have the ability to perform all types of medium to heavy demolition work. With half theweight of the 60 lbs. class paving breakers, the ratio of their high impact energy versus theirweight make them the most efficient tool APT makes.

Clay & Trench DiggersAmerican Pneumatic Models 118 & 119

The rugged APT Clay and Trench Diggermodels are used for digging clay, shale,hard pan and frozen ground.

Backfill TamperAmerican Pneumatic Model 131

The APT Model 131 Backfill Tamper is usedfor soil compaction, temporary filling of holes,asphalt packing etc.

133RivetBuster

1133Rivet Buster

131Tamper

118Clay Digger

Model Number 115 137 M155 155 117 140 160 190

Manufacturer APT APT APT APT APT APT APT APT

Weight (lbs.) 19 38 61 61 N/A N/A N/A 91

Length N/A 19-3/4" 22-3/8" 22-3/8" N/A N/A N/A N/A

CFM @ 90 psi 32-36 85-90 50-60 110-120 34-38 48 60-65 75-80

Blows perMinute

2900 2300 2100 2100 1850 1500 1680 1350

Chuck Size 7/8" HEXx 3-1/4"

7/8"x 3-1/4"

7/8"x 3-1/4"

7/8"x 3-1/4"

1" HEXx 4-1/4"

1" HEXx 4-1/4"

1-1/4" HEXx 6"

1-1/4" HEXx 6"

Cat. Class 110-1650 110-1670 110-1680 110-1690 110-1550 110-1565 110-1570 110-1580

155Rock Drill

117Paving Breaker

160-190Paving Breaker

Tools / Air Tools

38363_UR 2017_01-53_Tools.indd 7 3/14/17 10:48 AM


Tools / Boiler Tools

Wart Hog Milling Gun• Mounts rigidly to produce a clean, continuous chip• Requires no cutting lubricant• Simultaneously bevels, faces, and bores• Lightweight and requires no special training• Efficient chatter-free cutter blade locking design• Torque-free operation prevents operator fatigue• Low maintenance, compact, air-powered tool

A heavy-duty ratchet wrench and knurled knob allowseasy clamping and is perfect for limited access areas.

Model H-300 Cat. Class: 500-2005

Mongoose Milling Gun• Patented, self-centering, push-pull clamp and release

mechanism has permanently attached wrenches• Only 2-1/4" wide• Rugged with torque-free operation• Powerful pneumatic motor needs only 25 cfm air flow• Produces a thick chip without cutting oils• Easy-to-change mandrels• EscoLock™ blade locking system

Bevels, faces and bores stainless steel and other highlyalloyed tubing.

Model MG-500 Cat. Class: 500-2006

Ground Hog Milling Gun• Self-centering torque-free operation• Permanently attached clamps and wrenches• Rigidly mounts to tube I.D., easy to release• Sealed construction allows use in any orientation• Produces a smooth, continuous chip• Compact, low-maintenance end prep tool• Performs any angle of bevel• Steel housing with integral radial-thrust ball bearing• Chatter-free cutter blade locking design• Uses Tin coated cutter blades

Patented push-pull clamping and release system.

Model G-300 Cat. Class: 500-2007

38363_UR 2017_01-53_Tools.indd 8 3/14/17 10:48 AM


Tools / Electrician Tools

640 Electricians Cable Puller• An economical puller with enough power for most jobs• Length 21"• Width 21"• Height 12"• Pulling Force (Maximum) 4000 lbs.• Pulling Force (Continuous) 2500 lbs.• Weight 82 lbs.


6805 Electricians Cable Puller• Versi-Boom™ System allows you to make versatile and

fast set-ups and pull 10' (3 mm) or 20' (6 mm) of extracable easily

• Uses standard 3" rigid steel conduit for boom• Direct gear drive• Lightweight• Portable• Pulling Force Maximum - 8000 lbs. (35.8 kN)• Continuous - 6500 lbs. Versi-Boom™ System allows you

to make versatile and fast set-ups and pull 10' (3 mm)or 20' (6 mm) of extra cable easily


Conduit Benders

Model 555 855 881

Amperage Rating 20 AMP GFCI-Protected Receptacle 20 AMP GFCI-Protected Receptacle —

Voltage Rating 120 VAC 120 VAC 120 VAC

Degree of Bend — — 90°

Weight 260 lbs. — 999 lbs.

Cat. Class 200-1200 200-7910 200-1050

555 855 881

38363_UR 2017_01-53_Tools.indd 9 3/14/17 10:48 AM



885 Hydraulic Bender• Make elbows, offsets and saddles• Easy-to-use ram travel scale & charts for accurate bends• Cap: 1-1/4" to 5" Rigid Conduit• Optional Die / PVC Rigid• Optional Shoe - 5" Pipe

Model Cat. Class

885 Bender 200-1500

1802 Table 200-1155

842 Manual Bender• Strong, stable square hook design• 1-1/2" bender heads both offer the power pedal feature

with a larger foot area on the head for greater control,stability and leverage

• 1/2", 3/4" & 1" bender heads all have enlarged foot pedalsand increased toe room to ensure greater control, stabilityand leverage

Type Cat. Class

EMT 1/2" 200-1350

EMT 1" 200-1300

EMT 3/4" 200-1450

Mech 1/2"-1" 200-1802

1801 Mechanical Bender• Ratchet action for increased leverage• Bypass the ratchet for fast, direct bending on smaller sizes• Built-in bending degree indicator and easy to use bending

charts for accurate, consistent bends• Does not include handle• Centerline Bend Radius: 8-1/16" (204.800 MM) -9-11/16"

(246.100 MM) Rigid For 1-1/4" to 1-1/2" Rigid• Conduit Conduit Type: IMC, Rigid


847 PVC Heater/Bender• Easy to use preheat for 10 minutes• Heavy-duty metal construction with reflective interior for fast,

efficient heating• Has heating chart, timer, and on/off switch with

indicator light for added convenience• Double doors with piano hinges allow heating shorter

lengths with one door open• Heats 65" long section of pipeg


38363_UR 2017_01-53_Tools.indd 10 3/14/17 10:48 AM



UUT10-22 W/Chain Mount• 2-Speed motor that delivers the fastest pulling time for all

pulling needs over the widest (10000 lbs.) range• 0-6500 lbs. (0-28.9 KN) Continuous Operation• 6500-8000 lbs. (28.9-35.6 KN) 15 MINT ON/15 MINT OFF• 8000-10000 lbs. (35.6-44.5 KN) Momentary


6810 Cable Feeder• Accommodates cable ranging in size up to 3.5" (88.9 mm)

in diameter• Two loading methods: top-loading and end-loading• Reel weight capacity – 25,000 lbs.• Maximum Tracking Force – 200 lbs.

Max. Cable Capacity8 x 250 MCM6 x 500 MCM5 x 750 MCM


Model Reel Diameter Capacity Cat-Class

656 58"-90" 3750 lbs. 200-7000

683 46"-96" 2500 lbs. 200-7100

687 28"-56" 2500 lbs. 200-7200

Greenlee Reel Jacks

G3 Tugger• High-speed pulls up to 1000 lbs.• Continuous Rating 1200 lbs.• Intermittent 2000 lbs.• Patented push-pull clamping

and release system


UT10 Tugger - Electric• 2 Speed Ultra Tugger (UT10-2S) is

a one-stop-shop• The no-load high speed is 16 FT/

MINT and is best suited for loadsup to 4000 lbs. where the speedwill be 12 FT/MINT

• The no-load low speed is 9 FT/MINT and can be used on loads upto 8000 lbs. where the speed willbe 6 FT/MINT

• Momentary peak capacity of10,000 lbs


38363_UR 2017_01-53_Tools.indd 11 3/14/17 10:48 AM



615 Cable ReelRoller• Handles up to 15 ton

cable reels• One roller adjusts for

various reel sizes• Weight: 2500 lbs.• Length: 8'• Width: 5'


Radius Sheave• Yokes with cast steel

closuretype hooks witha 1" (25.4 mm) opening

• 5" (127 mm) widealuminum alloy sheaves

• Capacity: 4000 lbs.

Length Cat. Class

24" 200-8732

36" 200-8735

48" 200-8740

Wheel 2 Ton 4 Ton

6" 500-6303 —

12" 500-6304 500-6308

18" 500-6305 260-5005

24" 500-6407 260-5045

Hook Sheaves Double Yolk Sheave• 9-13/16" minimum radius• Forged steel closure type hook with 1" (25.4 mm) opening• 5" (127 mm) wide aluminum alloy sheave with

selflubricating bearings• Capacity: 4000 lbs.


Triple Sheave• Adjustable center sheave for 19-1/2" (495 mm) or 36"

(914 mm) radius• Capacity: 6500 lbs.


Tray Sheave• Steel frame easily attaches to cable tray up to 2" thick

Length Cat. Class

12" 500-6311

22" 500-6310

Radius Cable Roller

Range Cat. Class

12-18" 200-8620

20-24" 200-8630

30-36" 200-8650

Right Angle Tray Rollers 90°

Range Cat. Class

24" 200-8625

36" 200-8660

38363_UR 2017_01-53_Tools.indd 12 3/14/17 10:48 AM



Cable Tray Roller• Quick adjust push button to tightly fasten onto tray• 4 conveyer roller guide with retained spring pull-pin release

to easily remove cable• Capacity: 100 lbs.• Cable Size: 4"


Tray Roller Straight

Range Cat. Class

12-18" 200-8615

20-24" 200-8630

24-30" 200-8640

30-36" 200-8650

Wire Reel Dispensers

Model Spindles Capacity Max Spool Width Width Access Cat. Class

909 6 2500' 13" 30" 200-7695

910 10 2500' 14.18" 36" 200-2570

20 TON Reel Jack• Five hooks; top fits up to 3-1/2" spindles, next

down fits up to 3" spindles, and lowest three fitup to 2-3/8" spindles

• Capacity Range: 5-20 tons• Stroke Range – 9.5-14"

• Minimum Height – 21-34.5"


Type Cat. Class

100’ Steel 200-2115

100’ Nylon 200-2110

200’ Steel 200-2120

Fish Tape

38363_UR 2017_01-53_Tools.indd 13 3/14/17 10:48 AM



Type Manufacturer Model Capacity Cat. Class

Cordless Greenlee EK12IDL11 12 Ton 850-7080

Cordless Greenlee EK1240L11 12 Ton 850-7090

Manual Hydraulic Greenlee HK12ID 6 AWG 200-2010

Manual Hydraulic Greenlee 1990 24,000 lbs. 200-5130

Manual Greenlee 1981 8 AWG 800-4510

Manual Hydraulic Greenlee HKL1232 24,000 lbs. 800-4510

Aluminum Greenlee KD12AL — 850-7096

Copper Greenlee KD12CU — 850-7097

1990EK1240L11

HK12ID

EK12IDL11

1981 HKL1232 KD12AL KD12CU

Crimpers & Die Sets

Type Manufacturer Model Capacity Cat. Class

Hydraulic Greenlee SDK105 4.13" 851-6095

Battery Greenlee ESG01L11 2" 851-6096

Hydraulic Greenlee HK520 1/2" to 7/16" 850-6107

SDK105

ESG50L11

HK520

Cutters

38363_UR 2017_01-53_Tools.indd 14 3/14/17 10:48 AM


Tools / Punches

Type Manufacturer Model Capacity Standard Dies Slug Splitter Cat. Class

Hydraulic Greenlee 7310SB 10 GA Mild Steel 2-1/2" to 4" 1/2" to 2" 200-4250

Knockout Greenlee 7238SB 10 GA Mild Steel 1/2" to 2" — 200-7452

Hydraulic Greenlee 7906SB 16 GA Mild Steel 1/2" to 2" 1/2" to 1-1/4" 200-7653

Hydraulic Greenlee 7306SB 10 GA Mild Steel 1/2" to 4" 1/2" to 2" 200-7653

Battery Greenlee LS50L11B 6 Ton 2" to 6" — 200-7654

Hydraulic Enerpac SP-35 35 Ton 1/4" to 3/4" — 200-0006

Hydraulic Enerpac SP-50 50 Ton 17/32"-1 to 1/32" — 200-0106

7310SB7238SB 7906SB 7306SB

LS50L11B

SP-35 SP-50

Punches

38363_UR 2017_01-53_Tools.indd 15 3/14/17 10:48 AM


Tools / Hoisting

PROFI Air Powered Chain Hoists• Unlimited duty cycle for continuous operation• Rugged construction, minimum headroom• Impervious to dust, vapors, humidity and temperatures• Explosion proof• Variable speed control

Model 1-2 TI 1.5/3 TI 3/6 Ti 10/12 TI 16/20 TI 30 TI 50 TI

Chain Hoist Air (lbs.) 2000/4000 3000/6000 6000/12,000 20,000/24,000 32,000/40,000 60,000 100,000

Cat. Class 260-1710 260-1720 260-1735 260-1740 260-1745 260-1750 260-1760

Model Capacity Capacity Standard Lift Chain Pull to Lift Load Chain Shpg. Cat. ClassNumber (Tons) (kg) (ft.) Full Load (lbs.) Falls Wt. (lbs.)

LHH-.5B-20LL 1/2 454 20' 55 1 30 260-1850

LHH-.5B-30LL 1/2 454 30' 55 1 40 260-1850

LHH-1B-20LL 1 907 20 53 1 37 260-1851

LHH-1B-30LL 1 907 30' 53 1 48 260-1851

LHH-1.5B-20LL 1-1/2 1361 20' 65 1 50 260-1855

LHH-1.5B-30LL 1-1/2 1361 30' 65 1 64 260-1855

LHH-2B-20LL 2 1814 20' 74 1 63 260-1860

LHH-2B-30LL 2 1814 30' 74 1 80 260-1860

LHH-3B-20LL 3 2722 20' 84 1 90 260-1865

LHH-3B-30LL 3 2722 30' 84 1 114 260-1865

LHH-5B-20LL 5 4540 20' 79 3 108 260-1870

LHH-5B-30LL 5 4540 30 79 3 139 260-1870

Coffing Series LHH Hand Chain HoistThe Coffing LHH hand chain hoists features stamped steel and acompact, lightweight design ideal for construction and contractorapplications where portability and easy rigging are critical.• Compact gear housing provides low headroom• Lubricated gearing ensure smooth and efficient operation with

minimal effort• Mechanical load brake engages instantly for precise load holding

and positioning• 360° swivel hooks with safety latches for positive

load engagement• Hardened load chain provides added strength and wear

resistance for greater chain life• Stamped steel housing withstands rugged conditions• Designed for easy inspection and maintenance• ASME B30.16• Load Limiter

38363_UR 2017_01-53_Tools.indd 16 3/14/17 10:48 AM


Tools / Hoisting

Coffing BC BeamClamp• Capacities from 1 to 10 Tons

Designed to fit the flanges of RSJsand Universal beams and act as asemi-permanent lifting point for usewith manual and powered hoists.

Model TCR500-C-30 TCR6000P2-20

Chain Hoist Air (lbs.) 2000 4000

Cat. Class 260-1700 260-1730

Model Capacity Capacity Standard Lift Min Dis. Between Handle Force at Lever Length Shipping Cat. ClassNumber (Tons) (kg) (ft.) Hooks (in.) Full Load (lbs) (in.) Wt. (lbs.)

BAN07510LL 3⁄4 750 10' 12.8" 45 9.63" 16 260-3005

BAN07520LL 3⁄4 750 20' 12.8" 45 9.63" 20 260-3005

BAN15010LL 1-1⁄2 1500 10' 14.2" 64 10.25" 24 260-3015

BAN15020LL 1-1⁄2 1500 20' 14.2" 64 10.25" 32 260-3015

BAN30010LL 3 3000 10' 17.5" 73 16.37" 46 260-3055

BAN30020LL 3 3000 20 17.5" 73 16.37" 61 260-3055

BAN60010LL 6 6000 10' 22" 93 16.37" 78 260-3060

BAN60020LL 6 6000 20' 22" 93 16.37" 108 260-3060

CM Bandit Ratchet Lever HoistThe CM® Bandit™ is one of the most compact and durable ratchetlever hoists in the industry. Its lightweight and portable design, easyfree-chaining feature and 360° rotating handle make it one of themost versatile hoists on the market today. Now available in 3/4,1-1/2, 3 and 6 ton capacities for all of your pulling and lifting needs.• Rugged yet lightweight design and construction is easily

transported and rigged even in the most confining spaces• Easy free chaining feature allows for quick take up and

positioning of slack chain. Designed not to accidently free chainwhile under load

• Double reduction gearing along with short cushioned grip handleprovides easy operation with minimal handle effort

• Impact resistant stamped steel with powder coat finish for extraprotection when working in harsh environments

• Enclosed Weston type load brake stays clean and dry for positiveload positioning

• Upper and lower hook blocks are bolted on for easy removal andinspection and have forged safety latches as standard

• Meets ASME B30.21• 100% Load Tested Zinc Plated Chain• Load Limiter

38363_UR 2017_01-53_Tools.indd 17 3/14/17 10:48 AM


Tools / Hoisting

CM LODESTAR Electric Chain HoistLegendary in performance the new Lodestarfeatures quieter operation, an environment friendlydesign, easier access to components, higherduty cycles, less maintenance and enhancedsafety features.• Less Maintenance & Long Service Life - heavy

duty DC brake, lifetime grease-lubricated gearbox, heavy duty rated motors, 5-pocket lift wheel,zinc plated chain, and precision gears

• Improved serviceability - easy access to theClutch, Motor, Electrical Control Panel and BrakeAssembly. Finger safe wiring and plug-and-playconnectors

• Improved load safety - clutch is located outsidethe load path which prevents slipping of theload in an overload condition when brake isnot powered

• Fabric chain container and rigid hook suspensionstandard on every Lodestar. Lug mount availableupon request

• Lifetime Warranty• Metric rated. CSA Approved. ASME B30.16• Made in the U.S.A.• AC Electrical Brake or Double DC Brake available• Variable speed drives (VFD) or traditional

2 speeds available

Single Speed Single Phase 3 Phase 3 Phase115V-1-60 230/460V-3-60 575V-3-60

Capacity Capacity Standard Lift Speed Item Shpg. Wt Item Shpg. Wt Item Shpg. Wt(Ton) (kg) Lift (ft.) (ft./min) Number (lbs.) Number (lbs.) Number (lbs.) Cat. Class

1/4 227 10 16 2722NH 53 2725NH 61 9794NH 61 260-2095

1/4 227 10 32 2732NH 61 2735NH 64 9412NH 64 260-2095

1/2 454 10 16 2752NH 61 2755NH 65 9448NH 65 260-1800

1/2 454 10 32 3512NH 110 3515NH 110 9206NH 110 260-1800

1 907 10 8 2762NH 72 2765NH 73 9466NH 73 260-1805

1 907 10 16 3522NH 113 3525NH 110 9236NH 110 260-1805

2 1814 10 8 3532NH 131 3535NH 130 9266NH 130 260-1810

2 1814 10 16 — — 3565NH 135 9280NH 135 260-1810

3 2721 10 5.5 9501NH 158 9505NH 158 9533NH 158 260-1817

3 2721 10 11 — — 9508NH 162 9538NH 162 260-1817

Beam Trollies1/2 ton to 30 ton

Cat. Classes: 260-0006 to 260-0695

Snatch Blocks1-1/2 ton to 30 ton

Cat. Classes: 260-8920 to 260-9097

Units spooled with new wire for each order*Certification available*

*All hoists tested and certified prior to each rental*Ingersoll Rand, Harrington, JD Nuehaus

Shackles3/8"-3/4 ton to 2"-85 ton

Cat. Classes: 330-9536 to 330-9921

Roustabouts

Model Manufacturer Height Weight Cat. Class

R-150 Sumner 15' 336 lbs. 330-9625

R-180 Sumner 18' 403 lbs. 330-9618

R-250 Sumner 25' 493 lbs. 330-9615

38363_UR 2017_01-53_Tools.indd 18 3/14/17 10:48 AM


Tools / Hoisting & Tuggers

Air Powered TuggersAir Winch, Planetary Gear Type, Max. Pull Single Line 1000 lbs., Length 19.81", Width 10", Height 15", Recommended WireRope Dia. 1/4", Capacity of Recommended Wire Rope 228', Drum Width 4.5", Gear Ratio 54:1, Required Pressure 90 psi,Air Consumption 50 SCFM, Inlet 1/2", Hose Size 3/4", 1st Layer Line Pull 1200 lbs., 1st Layer Line Speed 37 FPM, ANSI /ASME B30.7 Standards, Includes Manual Band Brake, Free Spool Clutch.

Model Description Cat. Class

BU7A Cable Winch Air Tugger 1000# 260-2305

EU Cable Winch Air Tugger 2000# 260-2310

H5U Cable Winch Air Tugger 3000# 260-2315

FA2I-24MX1E Cable Winch Air Tugger 4000# 260-2320

FA2.5A-20MX1E Cable Winch Air Tugger 5000# 260-2325

W3036LAABG Cable Winch Air Tugger 6000# 260-2330

FA5A-24MXI Cable Winch Air Tugger 10,000# 260-2340

FA2I-24MX1E IR FA5A-24MXI

Roller Lifts Hydraulic Jack/Dolly – Pair

Lift ForksLength

Fork Adjustable Capacity Height Width Cat. Class

12" to13/16" 6" 5" to 1-1/2" 4000 lbs. 44" 23" 200-7300

4" to 3/4" 6" 6"-19 to 1/2" 6000 lbs. 42"-1/2" 23" 200-7300

Electric Tuggers1/2 to 4 ton Capacity

Cat. Classes: 260-2145 to 260-2395

Pipe Dolly(Grass Hopper)• Lift up to 2000 lbs. (900 kg) unassisted• Special sliding chain block design accommodates long

and short loads• Carries up to 20" (500 mm) diameter pipe, tool boxes,

fittings and valves• Fits through 35" (89 cm) openings, is a versatile

12' (3.6 m) long and weighs only 165 lbs. (75 kg)• Rugged high pressure tires and wheels allow for

construction site mobility• Chains can be used to lock wheels for security


Units spooled with new wire for each order*Certification available*

*All hoists tested and certified prior to each rental*Ingersoll Rand, Harrington, JD Nuehaus

38363_UR 2017_01-53_Tools.indd 19 3/14/17 10:48 AM


Tools / Jacks & Lifts

MaxJacks

A-RollJacks

V-HeadJacks

RollJacks

Type Capacity Pipe Capacity Cat. Class

Max Jack 2500 lbs. 4" to 36" 500-1820

Roll Jack 2000 lbs. 2" to 30" 500-1622

A-Roll Jack 2500 lbs. 1-1/4" to 24" 500-1615

V-Head Jack 2500 lbs. Max 12" 500-1620

Porta Powers• Single Action – Low Profile• 1/2 ton to 100 ton

Cat. Classes: 210-4602 to 210-5160

Bottle Jacks

Bottle Jacks• Ideal for low profile requirements where

normal bottle jacks just won't fit• Designed for vertical lifting requirements in

automotive and ag repair shops, on loadingdocks, in industrial environments, on factoryfloors, and more

Capacity Cat. Class

1-3 Ton 270-1099

4-12 Ton 270-1100

14-22 Ton 270-1105

30-50 Ton 270-1110

55-60 Ton 270-1115

100 Ton 270-1010

Model Capacity Cat. Class

ZU4308KB 2 gal. 210-4603

PUJ 1200 0.5 gal. 210-5240

PUJ 1201B 2 gal. 210-5240

Electric HydraulicPumps

Machine Skates

Capacity Cat. Class

7.5 Ton 330-6134

10 Ton 330-6140

15 Ton 330-6150

30 Ton 330-6160

60 Ton 330-6170

Electric Hydraulic Pumps

Hand Hydraulic PumpUltima Series Steel lightweight pump has an ergonomic gripand operates with reduced effort, for less operator fatigue.• Vent-free reservoir helps eliminate spills• 2-stage pump has high flow at low pressure and low flow

at higher pressure• Use in horizontal or vertical position with head downward• Internal pressure relief valve


P39 100 cu. in. 210-5330

P80 100-800 cu. in. 210-5335

38363_UR 2017_01-53_Tools.indd 20 3/14/17 10:48 AM


Tools / Piping

Hydrostatic Test Pump Air• Efficient air operated pump• Wide range of pressures/volumes• Easy to operate controls• Output pressure regulation control• Portable light weight design• Low center of gravity• Semi-pneumatic tires• Low maintenance mounted regulatior• Lubricator• Glycerin filled test gauge• Water inlet suction strainer

Model Cat. Class

PDQCC 10000 545-9830

Ridgid Geared Threader• 141 threads 2-1/2", 3", 3-1/2", 4" pipe with one set

of dies• Jaw clutch prevents jamming• Simple adjustment for tapered or straight threads• Cam-type workholder sets instantly• Fully enclosed gearing• Right-hand only

Model Cat. Class

141 500-1530

Ridgid Threading Machine• Pipe Capacity: 1/8"-2" (3mm-50mm)

pipe, 2-1/4"-4" with 141, and 4"-6"with 161 Geared Threaders; 1/4"-2"(6mm-50mm) rod

• Recessed On/Off/Reverse switch• 115V, 38 RPM approved by CSA to

CSA and UL standards• Rear Centering Device: Cam-action

turns with chuck

Model Cat. Class

300 500-1515

Ridgid Threading Machine• Pipe Capacity: 1/8"-2" (3mm-50mm)

2-1/2"-4" (62mm-100mm), 4"-6"(100mm-150mm) with 141 and 161geared threaders

• Bolt Capacity: 1/4"-2"• Motor: 1/2 HP, single-phase, 115V,

50/60 Hz, 15 amp reversibleuniversal motor. (36 RPM)

• Switches: FOR/OFF/REV and Integralsafety foot switch

• Cutters: self-centering, full-floating• Large 1.75 gallon oil tray

Model Cat. Class

535 500-1512

Ridgid Threading Machine• Pipe Capacity: 1/4" 4" (6mm-100mm)

4"-6" (100mm-150mm) with161 Geared Threader

• Bolt Capacity: 1/4"-2"• Motor: 1 1/2 HP, single-phase,

60 Hz or 50 Hz, induction type• Gear Box: Two-speed gear box

3:1 ratio

Model Cat. Class

1224 500-1527

38363_UR 2017_01-56_Tools.indd 21 4/12/17 12:47 PM


Tools / Piping

Pit Bull

500-0884500-0882

500-0885

Track Unit

500-0883

500-0887

500-0886

500-0890

Type Capacity Cat. Class

14 Pit Bull 1"-4" 500-0883

26 Pit Bull 2"-6" 500-0884

28 Rolling Unit 2"-8" 500-0882

412 Rolling Unit 6"-18" 500-0887

618 Rolling Unit 6"-18" 500-0886

824 Rolling Unit 8"-24" 500-0890

618 Track Unit 6"-18" 500-0885

Rolling Unit

Pit Bull14

Pit Bull26

Rolling28

Rolling412

Rolling618

Mega MC824

Track618

Advanced blade design for smooth face and long life ✓ ✓ ✓ ✓ ✓ ✓ ✓

ISO-compliant industrial Teflon-coated heater plates ✓ ✓ ✓ ✓ ✓ ✓ ✓

Patented Centerline Guidance System for equal distribution of force aroundthe joint

✓ ✓ ✓ ✓ ✓ ✓ ✓

Serrated jaws and inserts keep pipe from slipping during fusion ✓ ✓ ✓ ✓ ✓ ✓ ✓

Hard-anodized aluminum wear surfaces for corrosion resistance ✓ ✓ ✓ ✓ ✓ ✓

Thrust-bearing-equipped clamp knobs to minimize force required to clampand round pipe

✓ ✓ ✓ ✓ ✓ ✓

Microprocessor-controlled heater ✓ ✓ ✓ ✓ ✓

Lightweight heater design with 45° handle to prevent overheating ✓ ✓ ✓

Reversible jaws, clamp knobs, levers & facer allow operator to fuse fromeither side of machine

✓ ✓

Semi-automatic locking cam system maintains force during cooling ✓ ✓

DataLogger® compatible ✓ ✓ ✓ ✓ ✓

High-force cylinder machine available ✓ ✓ ✓ ✓ ✓

Industry standard semi-automatic hydraulic control system ✓ ✓ ✓ ✓ ✓

Low-force cylinder machine available ✓ ✓ ✓ ✓ ✓

Powerful hydraulic facer for facing the toughest pipe with ease ✓ ✓ ✓ ✓ ✓

Removable 3- or 4-jaw carriage for close quarter use ✓ ✓ ✓ ✓ ✓

Available in Combination Unit (CU) for sidewall fusion ✓

Large capacity 2-stage hydraulic pump for cool oil at max operating pressure ✓

Hydraulic clamping available ✓ ✓ ✓ ✓

Hydraulic pipe lifts ✓ ✓ ✓ ✓

Medium-force cylinder machine available ✓ ✓ ✓ ✓

Gas-powered models available ✓ ✓ ✓

On-board generator for powering heater ✓ ✓ ✓

Heater and facer can be easily converted to top-loading for confined spaces ✓

Rugged outriggers for added stability ✓

Automated Machine Option ✓

Battery disconnect for easy lockout ✓

Dual Speed tracks ✓

Self-contained, self-propelled, all-terrain ✓

Self-locking brakes ✓

38363_UR 2017_01-53_Tools.indd 22 3/14/17 10:48 AM


Tools / Piping

Pipe Line Up Clamps

Range Cat. Class

1"-8" 500-1398

2"-4" 500-1400

4"-6" 500-1403

6"-12" 500-1410

10"-36" 500-1415

14"-24" 500-1420

500-1510 500-1520

Type Dies Cat. Class

700 Pipe Threader 1/4"-2" 500-1510

Manual Pipe Threader 1/2"-2" 500-1520

Rotary Pipe Cutter

Range Cat. Class

5"-8" 500-1191

10"-14" 500-1196

20" 500-1197

24" 500-1198

Hinged Pipe Cutter

Range Cat. Class

4"-6" 500-1175

6"-8" 500-1182

8"-12" 500-1186

Manual Pipe Cutters

Range Cat. Class

1/8"-2" 500-1245

3"-4" 500-1250

10"-14" 500-1270

16"-18" 500-1272

Wheeler Rex 3890-24

Hydraulic Pipe Cutter 24"Pipes


161 Gear Head 4" to 6"Pipe• Links to 700 or 535 threaders• With adaptor


Pipe Vise Stand


Pipe Threader

38363_UR 2017_01-56_Tools.indd 23 4/12/17 9:52 AM


Tools / Piping

HKL1232

Bench Pipe Vises

Range Cat. Class

4" 500-1052

6" 500-1056

Soil Pipe Cutters• 2" to 6"

Cat. Class: 500-1223 to 500-1230

73-30573-310

FS56

FSM8FSH14

Pipe Jeep Meters


790SPY 5-35V 500-2600

785SPY 1-15V 500-2600

715 1-15V 500-2600

Hydraulic Pipe Crimper• 1/2"-2" Pipe Range


WR15

FS109WR5

Flange Spreaders

Type Model Capacity Cat. Class

Manual 73-305 3/4-20 500-0004

Manual 73-310 12-48 500-0019

Hydraulic WR5/WR15 1 Ton 270-1195

Hydraulic FS56 5 Ton 500-0001

Hydraulic FSM8 8 Ton 500-0250

Hydraulic FS109 10 Ton 500-0018

Hydraulic FSH14 14 Ton 500-0250

Hydraulic SWI202TE 25 Ton 500-0260

Ratchet Pop-It HD0535 15 Ton 500-0003

Ratchet Pop-it 95-525 10,000 lbs. 500-0002

Pop-ItHD0535

Pop-It95-525

38363_UR 2017_01-56_Tools.indd 24 4/12/17 12:47 PM


Tools / Piping

Ridgid Roll Groovers

• Handle Pipe from 1" up to 24" Diameter• Special Dies Available for Copper Pipe• All Units Attach to Ridgid Pipe Threaders

Model Type Capacity Cat. Class

915 Manual 2" to 12" 200-7880

916 Electric 1-1/4" to 6" 200-7878

918-I Hydraulic 1" to 12" 200-7872

920 Electric 2" to 24" 200-7874

*Confirm w/Tool hub staff that Groover sets match piping requirements

38363_UR 2017_01-53_Tools.indd 25 3/14/17 10:48 AM


Tools / Mobile Tool Room & Pro-Boxes

On-Site Tool Management forLarge ProjectsOur onsite Mobile Tool Rooms are customstocked with tools and supplies for yourproject, and include United Rentals’ trackingand management software. Delivered to yourjobsite, your Mobile Tool Room is managed bya United Rentals tools expert who checks outtools (via our scanning system) to authorizedusers, inspects tools upon return, and providesmaintenance services and safety oversight.

Improve Productivity andyour Bottom LineOnsite tool management improves efficiency,streamlines operations, reduces costs and deliversvalue. Our tool solutions ensure tool availability foryour crews and help maintain control over inventorywhile saving you money on storage, warehousing,costly tool repairs and maintenance.

38363_UR 2017_01-56_Tools.indd 26 3/21/17 11:50 AM



Pro-BoxCustom Stocked Gang Boxes Delivered to Your Site.United Rentals’ Pro-Box is stocked with tools and suppliesspecically for your project. This convenient tool solution isperfect for projects that require a limited range of tools andsupplies.

CONVENIENCE IS A PRO-BOX

United Rentals’ Pro-Box is a cost-effective solutionto supplement your existing tools for job-specificrequirements.• The right tools for your job• Avoid costly repairs and maintenance of ownership• Completely custom stocked• Convenient for traveling contractors• Delivery and pick up available• Hoisting • Hydraulic Torque Wrenches• Cutters • Hammers• Pliers • Punches• Saws • Tape Measures• Sockets & Wrenches

Capacity Size Cat. Class

3 cu. ft. L 30" W 16" H 12" 920-1300

16 cu. ft. L 48" W 24" H 28" 920-1305

24 cu. ft. L 48" W 30" H 34" 920-1310

35 cu. ft. L 60" W 30" H 34" 920-1315

47 cu. ft. L 60" W 30" H 46" 920-1320

47 cu. ft. L 60" W 24" H 60" 920-1320

120 cu. ft. L 60" W 44" H 82" 920-1325

United Rentals Mobile Tools RoomCustom built 40' mobile tool trailer


38363_UR 2017_01-53_Tools.indd 27 3/14/17 10:48 AM



Sample Tool List – Electrician's Pro-Box• Punch/Knock-Outset• Cable Cutters• Cable Strippers• Crimper-Manual• Die Heads• Drill 1/2" Cordless• Drill 1/2" Electric• Hammer: Ball Pein 16 oz.• Allen Wrench Set• Pipe Tool Tristand• Chain Vise• Pipe Wrench• Pliers-Slip Joint

• Reamer, Pipe Ratchet• Sawzall Cordless• Reel Jacks Large• Rotary Hammer• Hand Hacksaw• Portaband Electric• Screwdriver• Spindle-Cable Reel Stand• Strap Wrench• Tape Measure-50’• Fish Tape 100’ W/Case• Volt-Ohm/Amperage• Volt-Ohm/Megger• Wrench-Adjustable

Other Pro-Box Options• Steel Erecting• Plumbing• Mechanical• Carpentry• General Construction

Sockets and Wrenches

Description Sizes Cat. Class

Standard PipeWrenches

6" to 60" 500-1303 to500-1355

Aluminum PipeWrenches 850-4782

10" to 48" 500-9426 to500-9436

Channel LockWrenches

420- 480(including Brass)

850-4713 to850-4718

Scaffold Wrench 675-9371

Combo Wrenches(Brass available)

5/16" to 3-7/8" 851-0300 to851-0352

Crescent Wrenches 6" to 24" 851-0996 to851-1008

Adjustable SpudWrenches

— 851-2101

Spud Wrenches Box 851-2102 to851-2138

Open 851-2145 to851-2176

3/8" Ratchet Set Standard 850-4780

Deep Socket 850-4782



1/2" Drive 5 Piece 850-2543

1/2" Drive Metric 850-4778

3/8" Drive Standard 850-4780


3/8" Drive Metric 850-4781

3/8" Drive DW — 850-4782

1/2" Drive DW — 850-4783

3/8" Drive 6MM- 24MM STD 850-4784

3/8" Drive 6MM- 24MM DW 850-4785

1/2" Drive 10MM- 24MM STD 850-4786

1/2" Drive 10MM- 24MM DW 850-4787

Allen/Hex Key Standard 850-4927

1" Drive Chrome 29 piece 750-1320

1/2" Drive Chrome 12 piece 850-1323




3/8" Drive Metric 16 piece 850-1328

3/8" Drive Chrome 13 pieces 850-1329

3/8" Drive Chrome 21 pieces 850-1330

3/4" Drive Impact 13 pieces 850-1350

1/2" Drive Impact 13 pieces 850-1500

1/2" Drive Chrome 24 Pieces 850-2535

1/2" Drive 11 piece 850-2545

38363_UR 2017_01-53_Tools.indd 28 3/14/17 10:48 AM


Tools / Mobile Tool Room & Pro Boxes

Pliers, Clamps and Cutting


Pliers 8"Diagonal 850-2189

8" Lineman 850-2193

9" High Lev. 850-2195

C Clamp Pliers 11" 850-4719

Vice Grip Pliers 7" Curved 850-2203

7" Flat 850-2207

10" Curved 850-2201

10" Flat 850-2205

C-Clamps 3" 850-5139

4" 850-5152

6" 850-5156

8" 850-5159

10" 850-5143

12" 850-5145


Ultra Clamps 2" to 6" 500-6320

5" to 12" 500-6321

Jewel Clamps Small 850-5115

Large 850-5110

Plate Clamps 1 Ton 851-1469

2 Ton 851-1467

3 Ton 851-1466

Tin Snips — 850-6459

5/8" Rebar Cutter -Bender

— 181-8619

Bolt Cutters 18" 850-6105

30" 850-6108

36" 850-6110

42" 850-6130

Wire Strippers 8-12 Guage 850-6221

10-22 Guage 850-6222

Screw Drivers, Nut Drivers & Hex Keys

Description Sizes Cat Class

Slot Screw Drivers 4"- 12" 850-1904 to 850-1917

Phillips Screw Drivers 3"- 8" 850-1906 to 850-1921

Slot Screw Driver Sets 6 piece 850-1970

Phillips Screw Driver Sets 6 piece 850-1970

Nut Driver Sets — 850-4762

Hex Key Sets — 851-2736

Striking & Struck


Sledge Hammers Steel and Brass4 to 20 lbs.

850-5520 to 850-5576

Hammers Ball Pein -16 oz. to 32 oz.

850-5408 to 850-5418

Claw - 20 oz. 850-5029

Standard Claw 850-5025

Picks — 850-5740

Pry Bars 12" to 36" 330-6619 to 330-6624

Straight HammerWrenches

15/16" to 4-7/8" 851-2462 to 851-2534

Offset HammerWrenches

15/16" to 4-5/8" 851-2400 to 851-2469

Line Up Pins — 850-9250

Wedges Metal, Brass,Banana

850-4729 to 850-4736

All boxes customized to your specific needs. *Quantities and tools variety

38363_UR 2017_01-53_Tools.indd 29 3/14/17 10:48 AM


Tools / Torquing

Hydraulic Air PumpHytorc hydraulic air pump fortorque wrenches.

Model Cat. Class

Hytorcair 850-2840

Electric PoweredHydraulic PumpHytorc 115 hydraulic/electric pump fortorque wrenches.

Model Cat. Class

Hytorc 115 850-2842

Hydraulic TorqueWrench HoseHytorc 090172S torque wrenchhose-15'.

Model Cat. Class

090172S 850-4901

Pneumatic 3/4"Torque WrenchHytorc J-GUN-A1-AP Impact Wrench.Air impact wrench with 3/4" torquecontrol. Torque range ft.-lbs. 320-1285.

Model Cat. Class

JGUN-A1-AP 110-1377

Pneumatic 1"Torque WrenchHytorc J-GUN-3-AP Pneumatic torquewrench. Air Impact wrench with 1"torque control. It provides the speed,safety, and simplicity of an impact gunwithout the vibration and heavy weight.It is the only air torque tool in the worldthat is calibrated for bolt load andtorque and can be operated withoutreaction arms and backup wrenches.Torque range ft.-lbs. 915-3305.

Model Cat. Class

J-GUN-3-AP 110-1378

Pneumatic 1-1/2"Torque WrenchHytorc J-GUN-5-AP Pneumatictorque wrench. Air impact wrenchwith 1-1/2" torque control. It providesthe speed, safety, and simplicity of animpact gun without the vibration andheavy weight. It is the only air torquetool in the world that is calibratedfor bolt load and torque and can beoperated without reaction arms andbackup wrenches. Torque rangeft.-lbs. 1200-5200.

Model Cat. Class

JGUN5 110-1384

Model Torque Range Final Torque H L R RPM Final Torque Weight (With Battery)Ft. Lbs./Nm Inches/cm (No Load) RPM Lbs./Kg. Cat. Class

BTM-1000 200-1200/ 3/4" 12.85"/ 11.44"/ 1.59"/ 40 4 10.6/ 190-5280271-1627 32.6" 29.1 4.0 4.81

BTM-3000 500-3000/ 1" 13.20"/ 13.54"/ 1.75"/ 11 1.1 15.6/ 190-5290678-4067 33.5 34.4 4.4 7.07

36V Battery Powered Torque Gun• Speed Mode: High RPM for quick rundown or removal.• Power Mode: High power for accurate final torque or tough break-out.• Industry Leading Bolt Load Accuracy

FA2I-24MX1E

FA2I-24MX1E

The World’s First... industrial bolting system thatoperates without hoses, cords or reaction arms.The Lithium Series torque guns combined withHYTORC’s patented reaction washer offer theideal solution for portability and conveniencein industrial bolting. Safer, faster and moreaccurate than all comparable systems.

High Speed Rundown, Final Torque and AngleCapabilities The Lithium Series dual speedtorque gun provides the speed and convenienceof a pneumatic torque gun without the noise,vibration and load variation.

The Lithium Series torque guns are precisiontorque/tension bolting systems that can be setto your desired bolt load and locked in to repeatit on each nut. The Lithium Series uses custom-engineered precision planetary gearing to assureaccuracy, repeatability and reliability.

Lightweight, Durable & Powerful

The highest power-to-weight ratio of any batterypowered torque gun. High quality componentsensure superior performance and durability.Its aluminum frame makes it lightweight yetresistant to damage.

38363_UR 2017_01-53_Tools.indd 30 3/14/17 10:48 AM


Tools / Torquing


2XLCT106 1-3/8" 243-1687 ft./lbs. 850-3122

2XLCT107 1-7/16" 243-1687 ft./lbs. 850-3123

2XLCT110 1-5/8" 243-1687 ft./lbs. 850-3124

2XLCT113 1-13/16" 243-1687 ft./lbs. 850-3125

2XLCT200 2" 243-1687 ft./lbs. 850-3126

2XLCT203 2-3/16" 243-1687 ft./lbs. 850-3127

2XLCT206 2-3/8" 243-1687 ft./lbs. 850-3128

4XLCT113 1-13/16" 580-3855 ft./lbs. 850-3129

4XLCT200 2" 580-3855 ft./lbs. 850-3130

4XLCT203 2-3/16" 580-3855 ft./lbs. 850-3131

4XLCT206 2-3/8" 580-3855 ft./lbs. 850-3132

4XLCT209 2-9/16" 580-3855 ft./lbs. 850-3133

4XLCT212 2-3/4" 580-3855 ft./lbs. 850-3134

4XLCT215 2-15/16" 580-3855 ft./lbs. 850-3135

8XLCT206 2-3/8" 1143-8151 ft./lbs. 850-3136

8XLCT209 2-9/16" 1143-8151 ft./lbs. 850-3137

8XLCT212 2-3/4" 1143-8151 ft./lbs. 850-3138

8XLCT215 2-15/16" 1143-8151 ft./lbs. 850-3139

8XLCT302 3-1/8" 1143-8151 ft./lbs. 850-3140

Hytorc Ratchet Link


8XLCT308 3-1/2" 1143-8151 ft./lbs. 850-3141

8XLCT314 3-7/8" 1143-8151 ft./lbs. 850-3142

14XLCT302 3-1/8" 2010-13400 ft./lbs. 850-3143

14XLCT308 3-1/2" 2010-13400 ft./lbs. 850-3144

14XLCT314 3-7/8" 2010-13400 ft./lbs. 850-3145

14XLCT404 4-1/4" 2010-13400 ft./lbs. 850-3146

14XLCT410 4-5/8" 2010-13400 ft./lbs. 850-3147

4XLCT110 1-5/8" 580-3855 ft./lbs. 850-3149

4XLCT213 2-13/16" 580-3855 ft./lbs. 850-3152

18XLCT314 3-7/8" 2676-17845 ft./lbs. 850-3153

30XLCT314 3-7/8" 4770-25910 ft./lbs. 850-3154

4XLCT202 2-1/8" 580-3855 ft./lbs. 850-3155

4XLCT210 2-5/8" 580-3855 ft./lbs. 850-3156

2XLCT209 2-9/16" 243-1687 ft./lbs. 850-3157

2XLCT212 2-3/4" 243-1687 ft./lbs. 850-3158

18XLCT404 4-1/4" 2676-17845 ft./lbs. 850-3159

18XLCT410 4-5/8" 2676-17845 ft./lbs. 850-3160

30XLCT602 6-1/8" 4770-25910 ft./lbs. 850-3162

4XLCT214 2-7/8" 580-3855 ft./lbs. 850-3163


HY-2XLCT HYD LC 243-1687 ft./lbs. 850-3100




HY-1MXT HYD 3/4" SQ 200-1340 ft./lbs. 850-3104

HY-3MXT HYD 1" SQ 480-3230 ft./lbs. 850-3105

HY-5MXT HYD 1-1/2" SQ 835-5590 ft./lbs. 850-3106

HY-10MXT HYD 1-1/2" SQ 1755-11520 ft./lbs. 850-3107



HY-25XLT HYD 2-1/2" SQ 3960-25890 ft./lbs. 850-3111

HY-50XLT HYD 2-1/2" SQ 7875-52500 ft./lbs. 850-3112

Hytorc Wrenches

Drive Model Manufacturer TorqueRange(ft.-lbs.)

Cat. Class

3/4" .5 G2 Hytorc 75-475 190-5260

1" FG3-110 Hytorc 600-3150 190-5270

Manual Torque Wrenches

Drive Torque Range (ft.-lbs.) Cat. Class

1/4" 40-200 851-0125

3/8" 20-100 851-0120

1/2" 30-150 851-0115

3/4" 120-600 851-0108

1" 100-700 851-0102

1" 200-1000 851-0100

1" 300-2000 851-3111

38363_UR 2017_01-53_Tools.indd 31 3/14/17 10:48 AM


Tools / Welding

Miniflex® Portable Welding Fume Extractor (115V) – K3972-1• Portable high welding fume extractor system for light duty applications• Choose 94 CFM (Low) or 135 CFM (High) fume extraction settings• System Airflow Check allows the user to monitor extraction performance• Carbon Brushes Early Warning System alerts the user when 80% of the carbon brushes have been consumed• (H x W x D):28.75" x 16.5" (730 x 420 mm)• Net Weight: 38 lbs. (17 kg)reaction arms and backup wrenches. Torque range ft.-lbs. 915-3305

Cat. Class: 975-1505 EXTRACTOR SMOKE/FUME 50-200 CFM

X-Tractor® 1GC Portable Weld Fume Extraction Unit (230V) – K652-2Lightweight portable high vacuum welding fume extraction system ideal for light duty, intermittentuse in small shop, maintenance or construction.• Great for confined spaces• Easily clean the filter using external compressed air• Requires 230V single phase input power• (H x W x D): 13.4" x 26.8" x 15.8" (340 x 680 x 400 mm)• Net Weight: 37 lbs. (17 kg)

Cat. Class: 975-1505 EXTRACTOR SMOKE/FUME 50-200 CFM

Mobiflex® 200-M Welding Fume Extraction Base Unit – K1653-2• Generous airflow at 735 CFM• Extremely large 538 ft. 2 filter surface area requires fewer filter changes• Internal spark arrestor prevents sparks from reaching the filter• Filter status indicator provides a visual guide to remaining filter life• (H x W x D): 36" x 32" 48" in. (900 x 810 x 1210 mm)• Net Weight: 201 lbs. (91.3 kg) backup wrenches. Torque range ft.-lbs. 1200-5200

Cat. Class: 975 1510 EXTRACTOR SMOKE/FUME 700-1500 CF

XMT 350 WeldersXMT Power SourcesInput Power Requires 3- or 1-phase power

Rated Output• 350A at 34VDC, 60% Duty Cycle, 3- Phase• 300A at 32VDC, 60% Duty Cycle, 1- PhaseWelding Amperage Range• 5 - 425 A, in CC mode• 10 - 38 V, in CV modeNet Weight: 80 lbs. (36.6 kg)

CST CST XMT 350 XMT 350 XMT 450 XMT 450Model CST 280 4-Pack 8-Pack XMT 350 4-Pack 6-Pack XMT 450 4-Pack 6-Pack

Manufacturer Miller Miller Miller Miller Miller Miller Miller Miller Miller

Rated output 280A/ 280A/ 280A/ 350A/ 350A/ 350A/ 450A/ 450A/ 450A/CC/DC 31.2V 31.2V 31.2V 34V 34V 34V 38V 38V 38V

Rated Duty 35% 35% 35% 60% 60% 60% 100% 100% 100%Cycle

Stick (SMAW) Yes Yes Yes Yes Yes Yes Yes Yes Yes

TIG (GTAW) Yes Yes Yes Yes Yes Yes Yes Yes Yes

MIG (GMAW) No Yes Yes Yes Yes Yes Yes Yes Yes

Flux-Cored No Yes Yes Yes Yes Yes Yes Yes Yes(FCAW)

ARC Gouging Yes Yes Yes Yes Yes Yes Yes Yes Yes(CAC-A)

Weight 41 lbs. 355 lbs. 640 lbs. 80 lbs. 599 lbs. 759 lbs. 122 lbs. 780 lbs. 1024 lbs.

Input Power 10.2 kw 40.8 kw 81.6 kw 13.6 kw 54.5 kw 81.6 kw 18.9 kw 75.6 kw 113.40 kwneeded @Rated Output

Cat. Class 975-1271 975-0955 975-0975 975-1358 CC/CV 975-4560 CC/CV 975-4555 CC/CV 975-1450 975-4580 975-4585975-1359 VS 975-4570 VS 975-4565 VS

38363_UR 2017_01-53_Tools.indd 32 3/14/17 10:49 AM


Tools / Welding

Spectrum® Series Plasma CuttersOur Spectrum line of plasma cutters provides big cuttingpower in portable packages and with features like flexiblecables and Auto-Re fire technology they are better thanever. Step up to Spectrum 625 X-TREME™ or 875/875Auto-Line™ Models to add Ultra-Quick Connect hand-held torches and machine torch capabilities.

Power factor correction (PFC). Uses less energy byutilizing input power more efficiently and increasesproductivity by reducing nuisance circuit breaker trips.


Spectrum 375 Cutter Plasma 3/8" 975 7500

Spectrum 875 Cutter Plasma 7/8" 975 7525

Powermax 125 Cutter Plasma 1" 975 7530

Pulse Mig Gun• Invision 350 MPa• Input Power Requires 3- or 1-Phase Power, 50/60 Hz• Rated Output 10 -38 V, 5-425 A• Weight Net: 80 lbs. (36.3 kg) Ship: 89.1 lbs. (40.4 kg)• Invision 350 Mpa MIG (GMAW)/Pulsed MIG (GMAW-P)• Flux Cored (FCAW)• Air Carbon Arc Cutting and Gouging• (CAC-A) (1/4" carbons max.)• Invision 350 MPa


350MPA Pulse MIG Water-cooled Gun 975-4525

Wire Feeder• Maxtrac® Wire Drive System• Dual Range Wire Feed Speed• Trigger Interlock Switch• Replaceable and Flame Resistant Case• Potted PC Boards• Solid Wire Size Range .023-1/16" (0.6-1.6 mm)• Cored Wire Size Range .030-5/64" (0.8-2.0 mm)• Wire Speed Range IPM (m/min) 50-700 ipm

(1.3-17.7 m/min)• Dimensions (H x W x D) 15" x 8.7" x 23.2"

(381 mm x 221 mm x 589 mm)• Net Weight 38 lbs. (17.237 kg)


LN-25 PRO Wire Feeder Mig 975-0156

Welding LeadHighly flexible annealed 30 gauge bare copper conductor,insulated with an EPDM jacket and paper separator.Operating temperatures range from -50°C to +105°C(-58°F to +221°F).


WC20B050MBFB Welder Lead 50' 975-2205

WC20B100MBFB Welder Lead 100' 975-2210

38363_UR 2017_01-53_Tools.indd 33 3/14/17 10:49 AM


Tools / Welding

Propane Welders Bobcat 250 LPRugged welder/generator is great for Stick andFlux-Cored welding and designed for maintenanceand repair operations, construction, farm, ranch andgenerator use.


Stick WelderProvides maximum portability and performance inmost compact TIG/Stick packages in the industry.Dependability and performance all in one machine.

Model AmperageMax

Voltage Cat. Class

Maxstar 150 150A 120-240V 975-1140

Tig WelderIndustry standard - Miller Electric pioneered theMaxstar-type market, now we've perfected it. TheMaxstar 210 Series provides a solution for a varietyof needs; from simple to fully automated.

Model AmperageRange

Voltage Cat. Class

Maxstar 210 1- 210A 120-480V 975-1200

Stick Welder• Processes: Air Carbon Arc Cutting & Gouging;

Stick; TIG DC• Reliable stick welder for harsh environments

Model AmperageRange

Voltage Cat. Class

Gold Star 652 50 DC-850 DC 220/460/575V 975-1520

38363_UR 2017_01-53_Tools.indd 34 3/14/17 10:49 AM


Tools / Welding

Oxygen/Acetylene Carts


MIG Welders

Model Wire WireRange Range

OutputRange

Voltage Cat. Class

LincolnK2471-1

0.030"-0.035" 30-140A 120V 975-3095

Millermatic140

0.030"-0.035" 30-140A 120V 975-3095

Welding Remote


Capacity Cat. Class

10 lbs. 975-6727

50 lbs. 975-6725

300 lbs. 975-6723

350 lbs. 975-6724

400 lbs. 975-6728

Welding Rod Ovens

38363_UR 2017_01-53_Tools.indd 35 3/14/17 10:49 AM


Tools / Welding

Model Blue Star Bobcat 225 Bobcat 250 Big Blue Trailblazer Big Blue Big BlueNumber 185 AC/DC AC/DC 300R 325 400 Pro 500 Pro

Manufacturer Miller Miller Miller Miller Miller Miller Miller

Rated Output CC/DC 185A/25V 225A/25V 250A/25V 400A/24V 325A/33V 400A/24V 500A/40V

Rated Duty Cycle 20% 100% 100% 100% 100% 100% 40%

Stick (SMAW) Yes Yes Yes Yes Yes Yes Yes

TIG (GTAW) Yes Yes Yes Yes Yes Yes Yes

MIG (GMAW) Yes Yes Yes Yes Yes Yes Yes

Flux-Cored (FCAW) No Yes Yes Yes Yes Yes Yes

ARC Gouging (CAC-A) No Yes Yes Yes Yes Yes Yes

Generator Peak Watts (3ph) N/A N/A 11kw N/A N/A N/A 21kw

Generator Peak Watts (1ph) 6kw 10.5kw 11kw 12kw 12kw 12kw 15kw

Engine Gas Gas LP/Gas/Diesel Diesel Tier 4 Gas/Diesel Diesel Tier 4 Diesel Tier 4

Weight 267 lbs. 530 lbs. 556 lbs. 950 lbs. 620 lbs. 950 lbs. 1800 lbs.

Cat. Class 975-1180 975-1225 975-1250 975-1350 975-1350 975-1405 975-1500

Engine Driven WeldersConstruction jobsites, field fabrication, and maintenance/repair applications demand generator and welding power inlocations where electrical outlets aren’t available. In theseinstances, professionals, farmers/ranchers, and homeownersrely on the output of an engine-driven welding generator.These “two-in-one” machines feature generator power to runtools, lights, appliances, and motors. They also produceStick, TIG, MIG, and flux-cored outputs, so you can tackleevery field welding challenge.

Trail Blazer 325

38363_UR 2017_01-53_Tools.indd 36 3/14/17 10:49 AM


Tools / Welding

Engine Driven Welders for AllLincoln Electric’s line of diesel-powered industrial enginedrives are the world’s most respected among pipe welders.Our engine-driven welders provide diverse weldingcapabilities in the field – stick, TIG, MIG, flux-cored andgouging – and generate sufficient AC generator power forthe operation of lights, grinders and other tools, inverterwelders and plasma cutters. If your industrial weldingneeds call for excellent performance in tough, unforgivingenvironments, Lincoln Electric engine-driven welders willdeliver the high-quality welds you’re looking for.

Rent or Buy

Multiquip GLW-180H

Model Ranger® 250 GXT Vantage 300 Vantage® 400 Vantage® 500Number GAW180HE1 K2382-4 K2453-5 DLW400ESA4 K2509-7 K2728-3

Manufacturer Multiquip Lincoln Electric Lincoln Electric Multiquip Lincoln Electric Lincoln Electric

Rated OutputCC/DC 180A/26.8V 250A/25V 300A/32V 200A/2 X 27V 400A/36V 500A/40V

Rated Duty Cycle 50% 100% 100% 100% 100% 100%

Stick (SMAW) Yes Yes Yes Yes Yes Yes

TIG (GTAW) N/A Yes Yes Yes Yes Yes

MIG (GMAW) N/A Yes Yes N/A Yes Yes

Flux-Cored (FCAW) N/A Yes Yes Yes Yes Yes

Arc Cutting (CAC-A) N/A Yes Yes N/A Yes Yes

Generator PeakWatts (3ph) N/A 11,000 12,500 N/A 19,000 22,000

Generator PeakWatts (1ph) 3000 11,000 11,500 14,000 12,000 13,000

Engine Honda Gas Kohler® Gas Kubota® Diesel Kubota® Diesel Kubota® Diesel Kubota® Diesel

Weight 225 lbs. 602 lbs. 1035 lbs. 1050 lbs. 1230 lbs. 1290 lbs.(machine only) (machine only) (machine only)

Cat. Class 975-1180 975-1250 975-1350 975-1399 975-1400 975-1500

Heavy-Duty Welders• Diesel Powered• Trailer Mounted• Stick, TIG, & Gouge

The Lincoln diesel driven 400 amp DC welder has dual continuous output control for boththe current and the voltage. This lets the operator select the right arc characteristics forthe job at hand. It also gives you 11,000W of auxiliary AC power for power tools. Heavygauge steel case gives you durability on the jobsite. This model is a favorite with pipelinersand field welders. We also carry the smaller SA-250 amp welder.

Lincoln 500

Rent or Buy

Blue Star® 185• 185A DC Welding Output

Compact welding and power generator for light industrial,stick welding, and maintenance applications. 6000W ofgenerator power. Two people can easily pick up and carrythis unit using the durable tubular frame. Quick, easy weldamperage setting. Circuit breaker protection for thegenerator and the users’ tools. Unit shuts down for self-protection if oil is low.

38363_UR 2017_01-53_Tools.indd 37 3/14/17 10:49 AM


Tools / Pipe Beveling

Model Number Manufacturer Cutting / Beveling Range Pipe Size Estimated Weight Cat. Class

MSAM Mathey Dearman 1.5" to 4" 2", 3", 4" 19 lbs. 975-1020

1SAM Mathey Dearman 3" to 8" 3", 4", 6", 8" 31 lbs. 975-1030

2SAM Mathey Dearman 6" to 12" 6", 8", 12" 42 lbs. 975-1040

3SAM Mathey Dearman 12" to 20" 12", 14", 16", 18", 20" 85 lbs. 975-1043



6SAM Mathey Dearman 30" to 36" 30", 36" 300 lbs. 975-1046

Mathey Dearman Welding Accessories• Manually Operated Saddle Machine Basic Kits for

Cutting and Beveling Pipes

Includes base machine, torch arm equipped with a fully adjustabletorch carrier assembly for selecting torch angle, operating manual,and complete set of standard mounting legs and pipes. For pipesizes outside of the standard mounting leg sets, please seeAccessory Section XVI for optional leg sets to meet non-standardpipe diameters.

Note: Torch is not included and requires a minimum length of10" with a barrel diameter of 1-3/8" for full range capabilities.

Model Part No. Unit Of Mounting Machine ID A Machine B C D *D * Cat.Measure Min Max Weight Class

NB6 903-1015 Std. - in. 2.375 - 6.625 6.875 11.375 37 lbs. 3 2.25 4.5 500-2706Metric - mm 60.3 - 168.3 174.6 288.9 16.80 kg 76.2 57.2 114.3



NB12 903-1028 Std. - in. 6.625 - 12.75 13.25 17.75 56 lbs. 3 2.25 4.5 500-2712Metric - mm 168.3 -323.9 336.6 450.9 25.42 kg 76.2 57.2 114.3

NB14 903-1303 Std. - in. 8.625 - 14 14.5 19 63 lbs. 3 2.25 4.5 500-2714Metric - mm 219.1 - 355.6 368.3 482.6 28.6 kg 76.2 57.2 114.3



NB20 903-1038 Std. - in. 14 - 20 20.5 25 83 lbs. 3 2.25 4.5 500-2720Metric - mm 355.6 - 508.0 520.7 635.0 37.68 kg 76.2 57.2 114.3

NB24 903-1039 Std. - in. 18 - 24 24.5 29 98 lbs. 3 2.25 4.5 500-2724Metric - mm 457.2 - 609.6 622.3 736.6 44.49 kg 76.2 57.2 114.3

HydratightThe NB series (Narrow Body) clamshells are designed with a lower profilefor reduced weight and increased functionality in confined work spaces.The series is comprised of 15 standard models covering a range from1.90" (48.3 mm) to 36" (917.4 mm) OD.

The split frame design of the NB clamshell allows for installation of themachine at any point along a pipeline. These portable split frame machinesaccept a wide range of accessories to increase performance and expandcapabilities. Accessories for the Hydratight clamshells include sever slides,axial feed, single point, counterbore and swivel head modules.

NB Clamshell Specs (all models): B = 3" (76.2mm) C = 2.25" (57.2mm) D = 4.5" (114.3mm)* DIMENSION SUBJECT TO CHANGE WITH DIFFERENT TOOLING CONTACT YOUR SALES CONSULTANT FOR SPECIFICS.

38363_UR 2017_01-53_Tools.indd 38 3/14/17 10:49 AM


Tools / Air Compressors

Model Number AM1-PH65-08M AM2-PH09-08M

Manufacturer Mi-T-M Corporation Mi-T-M Corporation

Power Honda Gas Honda Gas

Drive Belt Belt

Horsepower/CC 6.5/196 9.0/270

Tank Size 8 gals. 8 gals.

CFM @100 psi 13.1 cfm 18.3 cfm

Pump Speed 1320 rpm 864 rpm


Cat. Class 100-2140 100-2200

Gas Powered Air CompressorsCompressor Pump: Quality cast iron two stage compressorwith venting system for reduced crankcase temperatureand pressure• Stainless-steel braided discharge hose• Splash lubricated cast iron crankcase to extend the hours

of performance• Cast iron head and cylinder for extended durability

AM1-PH65-08M

AM2-PH09-08M

Model Number AM1-HE02-05M AM1-PE15-08M

Manufacturer Mi-T-M Corporation Mi-T-M Corporation

Power 120V/15A 120V/13.2A

Drive Direct Belt

Horsepower/CC 2.0 hp 1.5 hp

Tank Size 5 gals. 8 gals.

CFM @100 psi 4.2 cfm 7.3 cfm

Pump Speed 3400 rpm 675 rpm


Cat. Class 100-2040 100-2065

Heavy Duty Electric PoweredAir CompressorCompressor Pump: Quality single stage compressor• Stainless-steel braided discharge hose• Oil lubricated aluminum crankcase• Aluminum head for heat dissipation• Cast iron cylinder• Inlet air filter

Compressor Pump: Quality cast iron single stagecompressor• Stainless-steel braided discharge hose• Splash lubricated cast iron crankcase to extend the hours

of performance• Cast iron cylinder with aluminum head for durability and

heat dissipation

AM1-HE02-05M

AM1-PE15-08M

38363_UR 2017_01-53_Tools.indd 39 3/14/17 10:49 AM



Portable Air Compressors• 185 to 1600 cfm range available• Rotary Screw type compressors• Meet US EPA sound requirements of

76 dBA @ 7 meters

As the world’s leading manufacturer of portablecompressors, Proven on job sites around the world,these air compressors offer the highest levels of durability,productivity and serviceability. Doosan Portable Powercompressors are ideal for air powered tool applicationsand feature increased fuel efficiency, reduced noise levels,and best-in-class serviceability and maintainability.

Model Number C185 P425/HP375WCU HP750WCU XP825WCU HP915 HP1600

Manufacturer Doosan Doosan Doosan Doosan Doosan Doosan

CFM 185 425/375 750 825 915 1600

Rated Pressure 100 psi 100/150 psi 150 psi 150 psi 150 psi 150 psi

Pressure Range 80-125 80-125/80-175 80-175 80-150 80-175 80-175

W x L x H 61.7" x 133.7" x 63" 78.1" x 152.6" x 68" 91" x 204" x 89" 91" x 204" x 89" 79" x 215" x 88" 90" x 290" x 100"

Weight 2225 lbs. 4535 lbs. 9500 lbs. 9500 lbs. 9480 lbs. 18,490 lbs.

Fuel Type Diesel Diesel Diesel Diesel Diesel Diesel

Cat. Class 100-3185 100-3275 100-3750 100-3800 100-3910 100-4400

C185P425/HP375WCU

HP750WCU

HP1600

38363_UR 2017_01-53_Tools.indd 40 3/14/17 10:49 AM



Air CompressorsAtlas Copco is the leading innovator worldwide inthe portable compressor industry.

Atlas Copco Portable Compressors aredesigned for “Sustainable Productivity”. Since itsintroduction, this range of portable, oil injected,rotary screw compressors have built an enviablereputation for performance, reliability, and efficiency.They are also engineered to be environmentallyfriendly. These compressors are very well suitedto many different jobs and applications – fromeveryday use of pneumatic tools in the constructionindustry to highly specialized and heavy dutyenvironments, like drilling offshore in the oil andgas business.

Atlas Copco Portable Compressors offer awide range of capabilities – from the awardwinning design of the “Hard Hat” canopy of theXAS 90/185/400 to the XAS 1800, which has1800 CFM of Full Featured Quality Air – andeverything in between! They have innovativefeatures to make your job easier and aftermarketsupported parts are within easy reach to makeroutine maintenance simple.

Model Number XAS 185 KD FT4 XAS 400 JD XATS 400 JD XAS 750 JD XAS 1800 JD

Manufacturer Atlas Copco Atlas Copco Atlas Copco Atlas Copco Atlas Copco

Rated Pressure 100 psi 100 psi 150 psi 100 psi 100 psi-1600 CFM

Pressure Range 58-125 psi 58-125 psi 58-175 psi 58-125 psi 58-165 psi

W x L x H 64" x 131" x 61" 72" x 161" x 70" 72" x 161" x 70" 78" x 203" x 78" 88" x 235" x 101"

Engine Diesel Diesel Diesel Diesel Diesel

Weight 2330 lbs. (wet) 4470 lbs. (wet) 4470 lbs. (wet) 6405 lbs. (wet) 18,300 lbs. (wet)

Cat. Class 100-3186 100-3350 100-3275 100-3750 100-4396

XAS 185 JD FT4

XATS 400 JD

XAS 1800 JD

38363_UR 2017_01-53_Tools.indd 41 3/14/17 10:49 AM


Tools / Sanders & Grinders

Model Number 1274DVSK 3107DVS D26451

Manufacturer Bosch Bosch DeWalt

Sander Type Belt Orbital Orbital

Size 2" x 21" 5" 5"

Motor 120V/6.6A 120V/3.3A 120V/3.0A

Speed (No Load) 550-1100 sfpm 4500-13,000 opm 12,000 opm

Weight 7.1 lbs. 5 lbs. 3.4 lbs.

Cat. Class 190-7225 190-7525 190-7525

Palm Sander

Hand SandersA full-line of heavy-duty DeWalt hand sanders areavailable, including angle sanders, belt sanders,orbital sanders, and palm sanders. Most modelsfeature AC/DC capabilities, allowing you to workoff of most generators and welders.

Belt SandersChoose from a variety of heavy-duty, Bosch handsanders for any job you may have, including beltsanders, orbital sanders, and palm sanders.

Belt Sander

DeWalt D28114N

DeWalt D28474W

Angle Grinders & SandersErgonomically designed Bosch anglegrinders feature a 5/8"-11" spindle thread,which provides flexibility for mountinga variety of popular accessories. A multi-position side handle lets you work in tightspaces and an AC/DC switch extends thetool versatility. United Rentals offers

a full-line of DeWalt angle grinders.Features 3-position, removable sidehandles for working in tight areas.AC/DC capability allows you to workoff of most generators and welders.Spindle l0ck allows for quick and easywheel changes.

Model Number D28114N D28402 1873-6 D28474W 1893-6 1380SLIM 1873-8 1994-6

Manufacturer DeWalt DeWalt Bosch DeWalt Bosch Bosch Bosch Bosch

Size 4.5" 4.5" 7" 7" 9" 4.5" 7" 9"

Amps 13A 10A 15A 15A 15A 7.5A 15A 15A

rpm 11,000 rpm 11,000 rpm 6000 rpm 8000 rpm 6000 rpm 11,000 rpm 8500 rpm 6500 rpm

Spindle Lock Yes Yes Yes Yes Yes Yes Yes Yes

Spindle Thread 5/8"-11" 5/8"-11" 5/8"-11" 5/8"-11" 5/8"-11" 5/8"-11" 5/8"-11" 5/8"-11"

Weight 6.7 lbs. 4.6 lbs. 11.5 lbs. 13.15 lbs. 11.9 lbs. 4.2 lbs. 11.5 lbs. 11.8 lbs.

Cat. Class 190-4075 190-4075 190-4225 190-4225 190-4000 190-4075 190-4225 190-4000

Model Number DAG500D DC411KA

Manufacturer Hilti DeWalt

Size 5" 4.5"

Amps 8.5A Cordless18V

rpm 11,000 rpm 6500 rpm

Spindle Lock Yes Yes

Spindle Thread 5/8"-11" 5/8"-11"

Weight 4.9 lbs. 7 lbs.

Cat. Class 190-4150 190-4615

38363_UR 2017_01-53_Tools.indd 42 3/14/17 10:49 AM


Tools / Saws

Cordless Reciprocating Saw• High-powered Milwaukee-built motor to deliver faster

cutting and performance• 28 Volt battery pack delivers two times the run-time as

most 18V products, making this the ideal solution incordless reciprocating saws

• Battery position does not interfere with plunge cuttingcapabilities

• This Sawzall® saw has a 1-1/8" stroke length thatdelivers fast cutting speeds

Dewalt DC385K Cordless Sawzall Reciprocating Saw


Electric Portable Band Saws• Cuts up to 3-3/4" in rectangular and round stock• Maintains a steady, optimum blade speed• Features all ball and roller bearing construction; worm

gear and chain drive mechanism

Dewalt DWM120K Electric Portable Band SawCat. Class: 625-0008

Cordless Band SawCat. Class: 625-1225

Electric Reciprocating Saw• 10 Amp motor provides the power to cut through heavy-

duty materials• 0 - 2800 spm variable speed delivers fast cuts• 1-1/8 in. stroke length provides efficient cutting• Variable-speed trigger provides optimal control• 4-position blade clAmp helps you make flush cuts• Blade clAmp features a lever action for easy operation• Keyless blade change for fast changes• 8' cord provides a long reach

Dewalt DW304PK Sawzall Electric Reciprocating Saw


14" Abrasive Cutoff Machine• 15A motor/4300 rpm• AC/DC capability – extends the versatility of the tool by

working from DC outlets such as welders and generators


12" Cut-Off Machine• 15A motor, 5000 rpm• 3-7/8" cut depth• Natural debris removal• Reversible handle


Pneumatic Band Saw• Cuts 4" wide x 4" deep• Weight 6 lbs.• Aluminum housing• Low Vibration

CS Unitec 5 6003 Air Portaband Saw


38363_UR 2017_01-56_Tools.indd 43 4/12/17 9:52 AM


Tools / Saws

Jig Saw• 120V/7A AC• Toolless blade-change system

– fast insertion, blade ejection levereliminates need to touch hot blade


10" Tile SawA robust tile saw with a refined cart and rail system forperfectly straight cuts. The TS 60 is equipped with apatented water and slurry system for little to no mess.This includes an efficient recycling system that cleanswater for reuse.


7-1/4" Worm Drive Saw• Powerful 15A motor• 20A switch and heavy gauge cord• Push button spindle lock for easy blade changes


7-1/4" Circular Saw• 15.0A motor/5600 rpm• 56˚ bevel capacity with positive

detents at 22.5˚ and 45˚• Includes: jobsite tool bag, 24-tooth

carbide blade, and blade wrench


14" AbrasiveCutoff Machine• 4 HP, 15A motor• Intergrated carry handle• Quick release locking vise; 0°-45° for

angle cuts• Spindle lock; fast wheel changes


38363_UR 2017_01-56_Tools.indd 44 4/12/17 9:52 AM


Tools / Lighting

Woodhead ExplosionProof Lighting• Rated Class 1 - Dividsion 1,

Grp C,D and Class 2 Grp EFG• Handlamp comes standard with

a 27 watt,120v Fluorscent lamp• 50' lamp cord with standard

5-15P Nema Plug

This Product is considered aTask Light. Illuminates a 10'circumference around operator.OSHA requires that this productbe protected by a GFI circuit.

FluorscentCat. Class: 320-2135

LEDCat. Class: 320-3020

Halogen Lights• 4 Headed / 110V• Weather-resistant• Adjustable from 7" to 10"• 4.17 amps/fixture• Steel quadpod stand


Halogen Lights• 2 Headed / 110V• Weather-resistant• Adjustable from 7" to 10"• 4.17 amps/fixture• Steel quadpod stand


1000 Watt Halogen Lights

Capacity Cat. Class

2 Head 320-1200

1 Head 320-2100

Magnetic Lights


Vapor Proof Drop Lights• 110V - 50’ Cords


2' & 4' FluorescentLights• 110V - 50' cords


Explosion Proof String Lights

Capacity Cat. Class

5 Head 320-3030

8 Head 320-3035

Mechanical Drop Lights• 110V - 50' cords


String Lights• 110V - Metal Guard


String Lights• 110V - Plastic Guard


LED String Lights• 110V - 50’ Cords


38363_UR 2017_01-56_Tools.indd 45 3/15/17 8:27 AM


Tools / Drills

3/4" Electric Drill• AC/DC switch• Full power forward

and reverse• 10A motor, 375 rpm• Triple gear reduction


VSR Screwdriver• Set-and-forget depth

sensitive nosepiece• 6.3A motor, 4000 rpm• #8 max. fastener size• Torque 81 in.-lbs.


Nibblers• Cuts various materials• 10-Gauge to 20-Gauge capacities

Cat. Class: 190-5475Cat. Class: 190-5450

3/8" VSR Drill• 7.5A motor; 0-2100 rpm• Variable speed, reversing

switch – Completecontrol for drilling, drivingand removing bits orscrews


1/2" VSR Drill• 8.0A motor; 0-850 rpm• One-handed keyless

chuck – for quick andeasy bit changes

• Magnesium fronthousing – forincreased durability


18V 1/2"Cordless Drill• 650 in.-lbs. torque• 0-1800 rpm• 1/2" metal chuck


3/8" Right AngleDrill• 3.8A motor; 0-1100 rpm• Variable speed dial –

for matching speed tothe application

• Paddle-type switchprovides extra controlwhen turning tooloff and on


1/2" ImpactWrench• 345 ft.-lbs. of torque

in forward or reverse• AC/DC, forward/reverse

rocker switch• Detent pin secures socket• 7.5A motor


3/4" Impact Wrench• 10.5A motor, 1260 rpm• 1900 bpm (no load)• 450 lbs. torque• 7/8" large bolt capacity


Shears• Visible blade allows precise

pattern cutting• Cutting capacities range from

8-Gauge to 20-Gauge

Cat. Class: 190-8450Cat. Class: 190-8350

1/2" Stud &Joist Drill• Low gear mechanical

slip clutch• Adjustable front and

2-position side handles• 11.5A motor, 1200 rpm• Triple gear reduction


38363_UR 2017_01-53_Tools.indd 46 3/14/17 10:49 AM


Tools / Drills

Size Cat. Class

1 HP 190-8810

2 HP 190-8820

3 HP 190-8830

Concrete Vibrators

Manufacturer Model Speed Cat. Class

DeWalt DW758 3.6K 190-4380

Table Grinder

Manufacturer Model Speed Cat. Class

DeWalt DW888 14.4 – 21K 190-4601

DeWalt DWE4887N 22 – 27K 190-4605

Die Grinder

Manufacturer Model Cat. Class

Bosch 1245EVS 190-6525

Rotary Hammer• X-Large SDS MAX Electric

Manufacturer Type Model Size Cat. Class

DeWalt Cordless Impact DC823KA 3/8" 190-2340


DeWalt Cordless Drill DCD740C1 3/8" 190-3050


Makita Electric Impact TW1000 1" 190-5225

190-2342 190-5225190-3050850-2341190-2340

Cordless Impacts

38363_UR 2017_01-56_Tools.indd 47 4/12/17 12:47 PM


Tools / Core Drills

Husqvarna DMS280

Husqvarna DMS230 Husqvarna DMS280

Norton Clipper HDR600C

Norton Clipper DR520

Model HDR600C DM230 DMS240 DR520 DMS280

Manufacturer Norton Clipper Husqvarna Husqvarna Norton Clipper Husqvarna

Max. Hole Size 4" 4" 10" 10" 16"

Motor Cardi Husqvarna Husqvarna Milwaukee Husqvarna

RPM 940 500-1400-2900 1400-2900 rpm 450/900 300-660-1140 rpm

Volt 115V 115V 115V 115V 115V

Amp 15A 15A 20A 20A 20A

Weight 12 lbs. 12 lbs. 51 lbs. 125 lbs. 86 lbs.

Cat. Class 181-7320 181-7320 180-7000 180-7000 180-7000

Core Drills• Drill 1/2" to 16" Holes in Concrete

United Rentals has both hand-held and rig-mounted coredrills. With models weighing as little as 14 lbs., thesemachines are easy to place and use. Picked for their sturdyconstruction, these machines are just what you need to drillopenings for plumbing, electrical wiring, mechanical, HVACducts, and vents.

Rent or Buy

38363_UR 2017_01-53_Tools.indd 48 3/14/17 10:49 AM


Tools / Magnetic Drills

Model Drill Press 1/2" Magnetic Drill Press 3/4" Magnetic

Max. cutter diameter 1-1/2" 38 mm 2-3/8" 60mm

Max. cutter drilling depth 2" 50 mm 3" 75 mm

Power consumption W1050 W1400

Power output W530 W770

No load speed 450 rpm First gear 330 rpm Second gear 340 rpm

Load speed 330 rpm First gear 180 rpm Second gear 340 rpm

Cutter holder 3/4" Weldon shank 3/4" Weldon shank

Stroke 2-1/2" 65 mm 3-5/8" 92 mm

Magnetic holding force 2023 lbs. 9000 N 2473 lbs. 11,000 N

Magnetic foot dimensions 3" x 6-1/4" 76 x 159 mm 7"-1/2 x 4" 191 x 102 mm

Height (min - max) 15.08" - 17.64" 383 mm - 448 mm 20" - 23.62" 508 - 600 mm

Width 7.87" 200 mm 7.51" 191 mm

Length 9.25" 235 mm 11.38" 289 mm

Cable with plug 13' 3.8 m 13' 3.8 m

Weight according to EPTA 32 lbs. 14.4 kg 53 lbs. 23.9 kg

Cat. Class 190-3500 190-3550

JHM USA 101 Magnetic Base Drills upto 1-1/2" / 2-3/8" (38/60 mm)For dimensionally accurate drilling on the construction site• Uniform-torque motor for demanding core drilling• High concentricity and reliable core ejection due to special

bore spindle guides• Solid, massive construction in die-cast aluminum for work

under difficult conditions• Integrated cooling tank.• Internal motor cable routing• Accessory handle for easy carrying of tool• Hand feed wheel can be mounted on either side

JHM USA 5-Magnetic Base Drills upto 1-1/2" / 2-3/8" (38/60 mm)With 2-speed gearbox for drilling in the workshopto depths up to 75 mm.• Uniform-torque motor for demanding core drilling• High concentricity and reliable core ejection due

to special bore spindle guides• Solid, massive construction in die-cast aluminum

for work under difficult conditions• Integrated cooling tank• Internal motor cable routing• Accessory handles for easy carrying of tool• Hand feed wheel can be mounted on either side• Mechanical 2-speed gearbox• Extra-long drill shaft. for drilling depths up

to 3" (75 mm)

38363_UR 2017_01-53_Tools.indd 49 3/14/17 10:49 AM


Tools / Magnetic Drills

Model Drill Press 1-1/4" Magnetic

Core bit max. dia. 1-1/16"

Core drill, max. drilling depth 2"

Twist drill max. dia. 7/8"

Tapping max. 1/2"

Max. countersinking dia. 2"

Cat. Class 190-3600

JCM 200U Carbide Magnetic Drill, 120VUniversal core drill unit for flexible working on site.• Mechanical two-speed gearbox with continuously variable

electronic speed reduction, for optimum cutting speedwhen drilling, tapping, reaming and countersinking

• Flexible accessories use and accuracy with a combinationof Quick IN and MT 3 adapters

• Adjustable double dovetail guide enables use of longdrilling accessories without removing the machine fromthe work piece

• Compact design and ideal power-to-weight ratio• Reversible• High torque, FEIN high-performance motor• Speed-controlled tacho electronics• Powerful magnet• Magnet monitor system• “Memory function” speed storage• Integrated gravity-fed cooling lubricant supply• Easy to use single-handed• Electronic overload protection• Self-start lock

Model Drill Press 1-1/2" Magnetic

Max. cutter diameter 4" 100 mm

Max. cutter drilling depth 3" 75 mm

Power output W1400

Motor V/A 120 11.7

Low speed (no load/load) 150/100 rpm

Mid Load speed 220/150 rpm

Mid high speed 290/200 rpm

High speed (no load/load) 450/310 rpm

Stroke 8-7/16" 215 mm

Spindle CL to magnet face 2-9/16" 65 mm

Arbor size 3/4" Weldon shank

Magnetic holding force 4833 lbs. 2192 kg

Weight 73 lbs. 33 kg

Magnetic foot dimensions 4-3/4" x 9-1/2" 121 x 242 mm

Height 31-3/8" 797 mm

Width 9-1/2" 242 mm

Length (w/handle) 16" 305 mm

Cat. Class 190-3610

Slugger JHM 4" x 4"The Slugger JHM 4 x 4 is a powerhouse drilling systemcapable of mag base drilling up to 4 inch (100 mm) Ø holes,3 inches (75 mm) deep.• 4 speed gear box for powering through large and

small holes• Versatile, MT 3 capable, uses 3/4" shank cutters• Smart Magnet TM circuitry for safe drilling on

marginal surfaces• Chip guard• Gravity-fed, external coolant• Easy to use control panel• Concealed motor wiring• Center pin coolant feed• Dovetail feed guides

38363_UR 2017_01-53_Tools.indd 50 3/14/17 10:49 AM


EH11 Spline Rotary/Demo HammerHigh impact tool for breaking concrete, brick, asphalt, stone,terrazzo, and frozen or hard ground. Can also be used fordrilling, cleaning and finishing masonry, and concrete surfaces.Lightweight 42 lbs. Requires 110V/10A.


Bosch 11255VSR

1" SDS-Plus® Bulldog Xtreme RotaryHammer7.2 amp, 0-1300 rpm, 0-5800 bpm. 3 modes of operation:rotation only, rotary hammer, and hammer-only mode. Integralclutch helps minimize torque reaction.


1-9/16" Spline Combination Hammer10 amp; 400 rpm; 3000 bpm. Impact energy: 5.2 ft.-lbs.Spline/round hex bit system — tool-free bit changes, withautomatic bit locking.


Bosch 11247

1-3/4" SDS-max® Combination Hammer13.5 amp motor, 145-280 rpm; 1350-2800 bpm. Impactenergy: 9.6 ft.-lbs.; turbo mode: 11.1 ft.-lbs. “Combination”Dual Mode Selector – 2 modes of operation, rotary hammerand hammer only mode.


Bosch 11263EVS

Bosch 11224VSR

7/8" SDS-Plus® Bulldog Rotary HammerSDS shank, 7/8" spiral, 1/2" steel, 1" wood, 2-1/2" core.0-6150 bpm with no load, 0-1100 rpm. Operating weightis 6.5 lbs.


1/2" Hammer Drill8.5 amp motor. Patented rotating brush plate – provides equalpower in reverse to easily back out bound-up bits and doublesbrush life.


Bosch HD19-2

1-1/8" Breaker Hammer Kit15 Amp 1300 BPM. Impact force of 34 ft.-lbs. (45J) andpowerful 1750 W motor.


Bosch 11335K

SDS-max® Demolition HammerVariable-speed dial for controlled chipping applications.Tool-free changes with automatic bit locking, dust protection,and maximum impact energy transfer rate. Requires120V/14A electrical service.


Bosch 11316EVS

1-9/16" SDS-max® Combination Hammer10 amp; 400 rpm; 3000 bpm. Impact energy: 5.2 ft.-lbs.“Combination” dual mode selector – 2 modes of operation,rotary hammer and hammer only mode.


Bosch 11240

1-1/8" SDS-plus® Rotary Hammer8.0 amp. Impact energy: 2.6 ft.-lbs. 360° auxiliaryhandle. Integral clutch.


Bosch RH328VC

Tools / Rotary Hammers

38363_UR 2017_01-53_Tools.indd 51 3/14/17 10:49 AM


Tools / Rock Splitters and Breakers

TE 60 Combihammer• Ideal for mechanical applications such as through drilling

• Strong 1200 W motor delivers impressive power forfast drilling

• Optimized drive system for consistent torque

• Robust components and efficient cooling providesuperior durability

Cat. Class 190-6375

TE 60-ATC-AVRCombihammer• Ideal for mechanical applications

such as through drilling• Strong 1200 W motor delivers impressive

power forfast drilling• Optimized drive system for consistent torque• Robust components and efficient cooling provide

superior durability• Innovative Active Vibration Reduction (AVR) helps

improve worker comfort and productivity• Active Torque Control (ATC) provides additional

operator protectionTE 1000-AVR Breaker• For use in medium demolition, concrete removal, concrete

bushing, tamping, digging, through penetrations in concreteand heavy floor tile removal

• Sub-chassis Active Vibration Reduction achieves the lowestvibration in its class

• Power reduction switch offers 30% less impact forprecision work

• DRS-B Dust Removal System collects up to 95% ofhazardous fine dust

• New brushless SR motor eliminates need to replace carbonbrushes — provides longer intervals between service andtwice the expected tool life

Cat. Class 190-2030

TE 3000 AVR Breaker• Over 50 foot-pounds of impact

energy results in outstandingdemolition performance and productivity

• Active Vibration Reduction achievesthe lowest vibration in its class

• TE-H Polygon Self-Sharpening Chiselsprovide strong breaking power andstick less in concrete

• New brushless SR motor eliminates needto replace carbon brushes and provideslonger intervals between service

• Power Conditioning System helps protectthe motor against power surges and drains

Cat. Class 190-2300

Bosch BH2760VCwith cart

Bosch BH2770VCDwith cart

Breakers• Electric or Gasoline Powered• No Air Compressor Required

Designed for breaking concrete slabs, floors, walls,sidewalks, stones, brickwork, frozen ground, heavy clayand asphalt. These Breakers do not need a compressor.Vibration dampened for easy operation. Direct impact onthe tool creates high breaking performance. Quick changetool holder accepts standard 1-1/8" hex x 6" shank.

Manufacturer WackerNeuson Bosch DeWalt Wacker

Neuson

Model EH27 BH2760 D25980 BH65

Power Electric Electric Electric Gasoline

Est ImpactEnergy

37 ft./lbs. 35 ft./lbs. 38.35 ft./lbs.47.9 ft./lbs.

Amps 15A 15A 15A N/A

Tool Weight 59.5 lbs. 63.2 lbs. 68.3 lbs. 57.3 lbs.

Cat. Class 190-2200 190-2200 190-2200 180-6960

D25980 BH65

38363_UR 2017_01-53_Tools.indd 52 3/14/17 10:49 AM


Tools / Gantry Crane

EME Aluminum Gantry CranesEME aluminum, portable, Gantry Cranes may be moved safely while under Full-rated Load. EME offers a capacity range ofone-half ton to five-ton Gantry Cranes. The Hollow Beam design is light-weight, and available in lengths up to 30 feet. Highlift to weight ratio – up to 26:1 lift-to-weight, much higher than steel gantries.• It only takes two people to build a standard gantry crane• High tech, ALL-aluminum-alloy construction (Legs, Beam,

Beam Trolley)• Portability: Easily transported between job sites in a

standard-sized pickup truck, and easily made compactfor storage

• Locking 'Surround-Beam' Trolley rides on top of the Beamand cannot derail — which enhances Operator safety

• Hollow Beam allows for 'ground-up assembly' – StandardGantry Cranes built easily by two people

• Casters that lock independently (for swivel and roll), forGantry to be steered and rolled under Load

• Easy-grip, Operator-friendly Handles forHeight Adjustment

• Aluminum Billet Handles on Beam for easy carrying.• Grade L9 Plated Fasteners

Model Cap Beam Min. Hight Max. Height LegNumber (lbs.) Length (ft.) To Lift Ring (in.) To Lift Ring (in.) Span (in.) Weight (lbs.) Cat. Class

4400M 4400 6'-15' 66" 90" 48" 240 330-9680

6600R 6600 6'-15' 106" 154" 70" 575 330-9650

11000R 11,000 6'-15.5' 106" 154" 70" 725 330-9635

38363_UR 2017_01-53_Tools.indd 53 3/14/17 10:49 AM


NOTES

38363_UR 2017_01-56_Tools.indd 54 3/14/17 11:10 AM


NOTES

38363_UR 2017_01-56_Tools.indd 55 3/14/17 11:10 AM


NOTES

38363_UR 2017_01-56_Tools.indd 56 3/14/17 11:10 AM

38363_UR 2017_00_IFC-IBC.indd 1 4/5/17 1:55 PM

38363_UR 2017_00_FC_BC_Tools.indd 1 4/4/17 10:38 AM

united rentals tool solutions catalog tool catalog... · united rentals tool solutions catalog ......

Documents