unitech cable trunking
TRANSCRIPT
8/19/2019 Unitech Cable Trunking
http://slidepdf.com/reader/full/unitech-cable-trunking 1/4
S A 0 9 / 2
1 1 5 8
8
METALLIC CABLE
MANAGEMENT SYSTEMS
CABLE TRUNKINGS
for Building & Construcon Materials
Specialized Factory for Steel ProductsSigma Factory for Steel Products
8/19/2019 Unitech Cable Trunking
http://slidepdf.com/reader/full/unitech-cable-trunking 2/4
METALLIC CABLE MANAGEMENT SYSTEMSCABLE TRUNKINGS
2
REFERENCES (Cable Management Systems):
ANSI /NFPA 70 - Naonal Electrical Code
NEMA VE 1-2009 - Metal Cable Trays Systems
NEMA VE 2-2006 - Cable Tray Installaon Guidelines
IEC 61537 Internaonal Electrotechnical Commission
SASO IEC (61537/2007) Saudi Standard
CSA C22.2 No. 126. 1-02 - Metal Cable Tray Systems
MATERIAL THICKNESSES
0.90, 1.20, 1.50 & 2.00 mm
METALLIC CABLE MANAGEMENT SYSTEMS
Uni Metal Cable Trunkings
DescriponSFSP manufactures a full range of Uni Metal Cable Trunkings: Single and mul compartments with accessories
in compliance to the internaonal standards of fabricaon.
Uni Metal provides a wide range of products capable of providing the characteriscs which respond to the proposed
applicaon, along with quality of assembly, speed of installaon, and cost-saving cable trunkings.
TYPES AVAILABLE LENGTHS
Single Compartment SCT - 2440 mm
Double Compartment DCT - 3000 mm
Triple Compartment TCT
ISO CERTIFICATESEstablished in 1989, SFSP has long been recognized as a quality manufacturing company.
In 2001, SFSP was cered by ISO management system and acquired the ISO 9002.
In 2006, SFSP was also cered by ISO and received the ISO 9001:2000.
In 2008, SFSP was also cered by ISO and received the ISO 9001:2008.
SINGLE COMPARTMENT CABLE TRUNKING SCT
Thicknesses: 0.9,1.2, 1.5, 2.0 mm
Available lengths: 2440 mm / 3000 mm
Dimensions: 50x50 mm 75x75 mm 100x100 mm 150x150 mm
75x50 mm 100x75 mm 150x100 mm
100x50 mm 150x75 mm
150x50 mm
DOUBLE COMPARTMENT CABLE TRUNKING DCT
Thicknesses: 0.9,1.2, 1.5, 2.0 mm
Available lengths: 2440 mm / 3000 mm
Dimensions: 50x50 mm 75x75 mm 100x100 mm 150x150 mm
75x50 mm 100x75 mm 150x100 mm
100x50 mm 150x75 mm
150x50 mm
MATERIALS & FINISHES
• Hot rolled steel S235JR as per EN 10025 / ASTM A-1011 CS Type B (formerly ASTM A569 or ASTM A570)
• Cold rolled steel DC01 as per EN 10130 / ASTM A1008 CS Type B ( formerly ASTM A-366)
and then:- Hot- dip galvanized as per BS EN 1461 (formerly BS 729 ) / ASTM A123 or
- Electro plated as per EN 12329 / ASTM B633 (Electrodeposited coangs of zinc on iron and steel)
• Pre- galvanized steel DX51 D +Z as per EN 10346 ( G180 and G275 is available upon special request) which supersedes EN 10327
which is a replacement of EN 10142 which in turn supersedes BS 2989 / ASTM A653M zinc coated (hot-dip galvanized) iron and
steel CS (commercial) or SS (structural) quality G60 and G90 is available upon special request (formerly ASTM A527M) / ASTM A924
(coang) (formerly A525)
• Stainless steel 1.4301 as per EN 10088-2 (formerly BS 1449 Part 2 / ASTM A240M, Grade AISI 304)
8/19/2019 Unitech Cable Trunking
http://slidepdf.com/reader/full/unitech-cable-trunking 3/4
C A B L E
T R U N K I N G S
3
TRIPLE COMPARTMENT CABLE TRUNKING TCT
Thicknesses: 0.9,1.2, 1.5, 2.0 mm
Available lengths: 2440 mm / 3000 mm
Dimensions: 50x50 mm 75x75 mm 100x100 mm 150x150 mm
75x50 mm 100x75 mm 150x100 mm
100x50 mm 150x75 mm
150x50 mm
FITTINGS
Bend 45� Top LidTL45
Bend 45� Inside LidIL45
Bend 45� Outside LidOL45
Bend 90� Top LidTL90
Bend 90� Inside LidIL90
Bend 90� Outside LidOL90
TEE Bend Top LidTBTL
TEE Bend Inside LidTBIL
TEE Bend Outside LidTBOL
Intersecon
IF
Reducer
AR
Hanger
ASH
Cable Retaining StrapACR
Straight & Flanged CouplersASC
Suspension BracketASB
METAL FRAMING CHANNELSSelecon Chart
Part No Channel Dimensions Thickness
Height “H” Width “W”
CCH - 220/221 21.0 mm 41.0 mm 1.5 mm
CCH - 240/241 41.0 mm 41.0 mm 1.5 mm
CCH - 320/321 21.0 mm 41.0 mm 2.0 mm
CCH - 340/341 41.0 mm 41.0 mm 2.0 mm
CCH - 420/421 21.0 mm 41.0 mm 2.5 mm
CCH - 440/441 41.0 mm 41.0 mm 2.5 mm
Standard Length: 3000 mm (Custom lengths are available upon request)
Materials: Mild Steel, Aluzink Steel, Stainless SteelFinishes: Pre-Galvanized, Hot-Dip Galvanized.
.
.
.
.
.
.
.
.
.
.
41.0
7.0
41.0
.
.
22.0
.
.
.
.
21.0
7.0
41.0
.
.
22.0
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
42.0
7.0
41.0
22.0
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
82.0
7.0
41.0
22.0
5 0
3 0
1 3
Toothed Channel
Canlever Arm Bracket B2BCanlever Arm Bracket
CABLE TRUNKINGS SUPPORT SYSTEMS
8/19/2019 Unitech Cable Trunking
http://slidepdf.com/reader/full/unitech-cable-trunking 4/4
www.unitech-ikk.com
www.unimetal-ikk.com
www.sfsp-ikk.com
Jeddah
Tel : +966 2 627 8222
Fax: +966 2 627 8722
Jeddah - Ghurab Showroom
Tel : +966 2 667 2000
Fax: +966 2 661 4306
Mak kah, Taif
Tel : +966 2 597 2675
Fax: +966 2 597 0588
Mad inah
Tel : +966 4 864 9111
Fax: +966 4 864 9222
Yanbu
Tel : +966 4 390 1499
Fax: +966 4 322 7101
Khamis Mushayt
Tel : +966 7 237 5929
Fax: +966 7 237 8783
Baha
Tel : +966 7 237 5929
Fax: +966 7 237 8783
Najran
Tel : +966 7 321 4038
Fax: +966 7 321 4035
Gizan
Tel : +966 7 321 6660
Fax: +966 7 321 0665
Riyadh
Tel : +966 1 454 9282
Fax: +966 1 456 6627
Riyadh - Rail St.Oce
Tel : +966 1 810 5926
Fax: +966 1 456 6627
Qassim
Tel : +966 6 382 3946
Fax: +966 6 385 2186
Qassim Showroom
Tel : +966 6 385 2598
Fax: +966 6 382 6684
Tabuk
Tel : +966 4 424 3386
Fax: +966 4 423 5203
Skakah, Qurayyat
Tel : +966 4 626 3904
Fax: +966 4 626 3905
Hail
Tel : +966 6 543 3931
Fax: +966 6 543 3935
Hafar Al Ban
Tel : +966 3 721 5915
Fax: +966 3 721 5915
Dammam
Tel : +966 3 859 0097
Fax: +966 3 857 8177
Dammam - Showroom
Tel : +966 3 834 9300
Fax: +966 3 834 9457
Hufuf
Tel : +966 3 586 9732
Fax: +966 3 584 5966
Jubail
Tel : +966 3 361 4390
Fax: +966 3 361 4499
Dubai - DIP
Tel : +971 4 884 7275
Fax: +971 4 884 7278
Dubai - Al Rashidiyah
Tel : +971 4 285 6031
Fax: +971 4 286 2941
Sharjah
Tel : +971 6 534 4092
Fax: +971 6 534 8949
Abu Dhabi - Musaah
Tel : +971 2 551 2334
Fax: +971 2 551 2335
EGYPT
Cairo
Tel : +20 2 3346 8566
Fax: +20 2 3346 8567
Cairo - Gamhouriyah St.
Tel : +20 2 2787 2152
Fax: +20 2 2593 1053
Cairo - Tagammu Al-KhamisTel : +20 2 2616 1650
Fax: +20 2 2616 165
BAHRAIN
Manamah
Tel : +973 1 756 4386
Fax: +973 1 756 4315
QATAR
Doha
Tel : +974 4451 3301/2/3
Fax: +974 4451 3305
LEBANON
Beirut
Tel : +961 1 858 277
Fax: +961 1 858 276
JORDAN
Amman
Tel : +962 6 556 3030
Fax: +962 6 554 7911
LIBYA
Tripoli
Tel : +218 21 717 0264Fax: +218 21 477 1612
OMAN
Muscat
Tel : + 968 24 591 006
Fax: + 968 24 597 006
KUWAIT
Kuwait City
Tel : +965 22 459 984
Fax: +965 22 459 985
YEMEN
Sana’a
Tel : +967 1 473 542
Fax: +967 1 473 542
SUDAN
Khartoum
Tel : +249 183 528 065
Fax: +249 183 248 065
UK
Birmingham
Tel : +44 121 698 21 85
Fax: +44 121 698 21 47
DESIGN OFFICE
GermanyStugart
Tel : +49 711 6868 7222
Fax: +49 711 6868 [email protected]
SFSP / KINGDOM OF SAUDI ARABIASpecialized Factory for Steel Products - Jeddah
Tel : +966 2 637 4482
Fax: +966 2 636 1963
SFSP / UNITED ARAB EM IRATESSIGMA Factory for Steel Products - Ajman
Tel : +971 6 743 9907
Fax: +971 6 743 [email protected]
SFSP / EGYPTSpecialized Factory for Steel Products - 6th of October, Cairo
Tel : +20 2 3831 2477
Fax: +20 2 3831 1036
SIGMA Factory for Steel Products - Umm Al Quwain
Tel : +971 6 767 0514
Fax: +971 6 767 [email protected]
KINGDOM OF SAUDI ARABIA UNITED ARAB EMIRATES