uniquely invented sand additive cast-cure for no-bake, … · modern foundry technology is focused...
TRANSCRIPT
SAND ADDITIVECAST-CURE
UNIQUELY INVENTED SAND ADDITIVE CAST-CURE FOR NO-BAKE, CO2, PEPSET MOLDS/CORES APPLICATIONS IN ALLOY STEEL FOUNDRIES
Modern foundry technology is focused on the production of high quality castings with complex geometries and excellent surface finish. CAST-CURE is the cost-effective sand additive in alloy steel casting foundries for veining, rat-tails, pin holes, scabbing, unacceptable surface finish.
Benefits of CAST-CUREReducing casting defects
Improves surface finish of castings
Reducing machining and cleaning room costs
Reducing gas porosity defects such as pin holes, blow holes
Eliminates veining & rat-tails
Environmentally friendly solutions (no emissions)
INNOVATIVE SOLUTIONS FOR ALLOY STEEL FOUNDRIES
Veining Rat-tails Pin Holes
Cast-Cure is a unique blend of superior quality materials specifically designed to improve your casting process and efficiency. Foundries that using CAST-CURE have increased productivity by eliminating cleaning room work through elimination of veining, rat-tails, pin holes, scabbing, unacceptable surface finish problems. Foundries have noted that defect free castings and excellent surface finish results in a casting of higher value.
Scabbing
OHAM INDUSTRIES
CAST-CURE do not affects on tensile strength
The flowability of sand remains consistent due to addition of CAST-CURE
Reduction in thermal expansion when added to silica sand molds/cores
CAST-CURE is in free flowing powder form and has unlimited shelf life
With our company, you are guaranteed a consistentand high quality product through our constant drive for effective resource management ensuring futurepartnerships with our current and prospective clients.
Alloy steel foundries in no-bake, co2, pepset molds/cores applications.
Resin coated sand manufacturers
SUGGESTED USE
APPLICATION
239, Vishala Supreme, S.P. Ring Road, Nikol, Ahmedabad-382350, Gujarat, India+91 7600007441 [email protected] www.ohamind.com
With Cast-CureWithout Cast-Cure
With Cast-CureWithout Cast-Cure
SAND ADDITIVE CAST-CURE
Cast-Cure is most commonly used 3.5-4% of foundry facing sand mixes. Used in molds & cores. No requires in backing sand. If facing sand is 100 Kg, mix 3.5-4 kg cast-cure properly with sand, then add binders.