unipol™ pe technology: sustainable solutions for hdpe …hdpe outperforms other materials for...
TRANSCRIPT
UNIPOL™ PE Technology: Sustainable Solutions for HDPE Products
21st International Conference
INDIAN Petrochem – 201914th & 15th November 2019
Dr. Brij Sinha
Commercial Director – India and South East Asia
Univation Technologies, LLC
Univation Technologies –
Global Licensor Leader of UNIPOL™ PE Technology
Licensed reactor lines in 30 countries
180 59
Reactor lines in designor under construction
50
November 2019 2
Millions tonnes annually global licensed capacity
Operating lines ≥400 kTA capacities – proven large capacity leader
30
November 2019 3
• UNIPOL™ PE Technology
transformed the industry –
continues today
• Recognized PE industry
leader
• Track-record of innovation
• Full-range R&D programs
Products
Process
Catalysts
Process control
• Comprehensive project
support
Engineering
Construction
Commissioning
Start-up
• Exceptional technology
transfer
• PREMIER™ Products and
Services
Takes performance to the
next level
• Unparalleled single-
reactor product flexibility
• Diversified PE portfolio
• Full density HD / LLD
product coverage
• Differentiated products
• Large-volume applications
WORLD’S LEADING
PE TECHNOLOGY
COMMITTED
TO INNOVATION
SERVICES FOR
LONG-TERM SUCCESS
BROADEST PRODUCT
CAPABILITY
Univation Technologies –
World’s Leading PE Technology
• Streamlined design
• Largest proven single-line
capacity: 650 kTA
• Lowest CAPEX: 95 – 120
million USD lower
investment than multi-
reactor / multi-loop
processes
• Maximizes return on your
overall investment
• Enables capturing new
opportunities
Source for capex data: NexantThinking™ Polyolefins Technology Analysis Report 2018
HD
PE
LL
DP
E
PipePE80 / PE100
Unimodal
Bimodal
Metallocene
Film
Large Part
Blow Molding Rotomolding
HIC Blow
Molding Hexene Film
HD Film /
ExtrusionUnimodal
Bimodal (Film)
Injection
Molding
Injection
Molding(Conventional &
Metallocene)
Butene Film
UNIPOL™ PE Technology –
Full-density PE Capability for HDPE & LLDPE Production
• Broadest single-line capability
• Same UNIPOL™ PE Reactor design for:
– HDPE / LLDPE full-density lines
– HDPE dedicated lines
– LLDPE dedicated lines
• State-of-the-art products:
UCAT™ J HDPE / LLDPE
XCAT™ Metallocene PE
ACCLAIM™ K & UCAT™ B
Unimodal HDPE
PRODIGY™ Bimodal HDPE
November 2019 4
November 2019 5
Univation Technologies & UNIPOL™ PE TechnologyMeeting the Challenge for a Sustainable Future
PROVIDE
SUSTAINABLESOLUTIONS POSITIVELY IMPACTING
BRAND OWNERS
ENVIRONMENTCONSUMERS
UNIVATION TECHNOLOGIES
INNOVATIVEPE PRODUCTS
UNIPOL™ PE Technology’s Sustainable Advantages
Recyclability / Reuse Resource Conservation
Light-weighting Durability / Service Life
November 2019 6
7
PRODIGY™ Bimodal HDPE Technology –
Blow Molding Applications
Typical Blow Molding Applications
• Household and Industrial Chemicals (HIC)
• Personal Care, Healthcare and Pharmaceutical
• Agricultural Chemicals
• Liquid Beverage
HDPE Blow Molding
HIC Bottle Growth
November 2019
Lig
ht-
weig
hti
ng
1,600
1,200
800
400
0
kTA
WE
2018
2023
kTA
120
180
60
0
AP China India ME CEE
Graph Source: Townsend Solution Polyethylene Report, 2018
8
PRODIGY™ Bimodal HDPE Technology –
Blow Molding Applications
Consumer & Brand-owner Requirements
• Must-haves: Top load, drop impact, ESCR
• Convertor specific: Processability, appearance
• Trends:
– Unique bottle shapes for visual differentiation, shelf-appeal
– Brand owners: Thinner, lighter bottles = reduced packaging
HDPE Blow Molding
HIC Bottle Growth
November 2019
Lig
ht-
weig
hti
ng
1,600
1,200
800
400
0
kTA
WE
2018
2023
kTA
120
180
60
0
AP China India ME CEE
Graph Source: Townsend Solution Polyethylene Report, 2018
9
PRODIGY™ Bimodal HDPE Technology –
Provides Performance, Unique Attributes for BM Applications
PRODIGY™ Bimodal HDPE Advantaged
vs. Z-N Bimodal HDPE
• Better low temperature impact resistance
• Higher melt strength for superior
sag resistance
• Similar or advantaged ESCR
UNIPOL™ PE Product Performance Attributes
0
25
50
75
100
125
150
175
200
Modulus
Melt
Strength
ESCR Charpy
Impact
Tensile
Yield
PRODIGY™ Bimodal HDPE Allows
Unique Tunable Swell
• Can tailor to suit customer swell requirements
• Not achievable with competitive Z-N bimodal
HDPE technologies
bHD benchmark
uHD benchmark
PRODIGY™ bHD
Lig
ht-
weig
hti
ng
November 2019
PRODIGY™ Bimodal HDPE Technology –
Provides Improved Performance Plus Energy Savings
November 2019 10
Higher Stress Crack Resistance
• Higher ESCR means safer packaging
• With stronger bimodal materials, containers
can be molded with less material while
maintaining strength
• Able to incorporate more post-consumer
recycle (PCR) while maintaining performance
Greater Processing Energy Savings
• Lighter weight containers require less heat
removal and, therefore, less chiller load
Increasing Container Weight, g
To
p L
oad
Str
en
gth
Lig
ht-
weig
hti
ng
UNIPOL™ bHD BM Performance Attributes
0 20 40 60 80
ES
CR
(h
rs)
% Post Consumer Recycle
Recycled PE
Incorporation
0 20 40 60 60
Univation PE Technology –
Micro-irrigation Products Maximizes Water Efficiency
11
Micro-irrigation Systems Benefits
• Micro-irrigation is a low water flow system
• Delivers water / nutrients directly to plants
• Includes PE drip tapes and drip tubing with emitters
• Higher efficiency than other types of irrigation
• Durable: May be re-used for several growing seasons
Res
ou
rce C
on
serv
ati
on
November 2019
FILTER
Well /
Water Source
Pump
Main Line
Submain Line
Drip Tape
Laterals
with
Emitters
Graph Source: Food and Agriculture Organization of the United Nations www.fao.org/nr/water
Agricultural Water Delivery Systems
Surface
Irrigation
Sprinklers Micro-
irrigation
50%
75%
90%
Wate
r U
se E
ffic
ien
cy
Univation PE Technology –
Micro-irrigation Products Maximizes Water Efficiency
12Graph Source: Food and Agriculture Organization of the United Nations www.fao.org/nr/water
Res
ou
rce C
on
serv
ati
on
November 2019
UNIPOL™ PE Performance Attributes
• PE applications include drip tape and tubing
• Balance of stiffness, toughness (tear, puncture)
• Good extrudability for high production rate
• Oxidative stability = long-service-life
Agricultural Water Delivery Systems
Surface
Irrigation
Sprinklers Micro-
irrigation
50%
75%
90%
Wate
r U
se E
ffic
ien
cy
13
PRODIGY™ Bimodal HDPE Technology –
PE-RT for Hot / Cold Water Pipe ApplicationsD
ura
bil
ity /
Serv
ice L
ife
PE-RT Gaining Market Share in Europe:
Favorable Cost / Performance, Ease-of-Installation
Graph Source: AMI Plastic Hot and Cold Water Pipes in Europe, August 2018
PRODIGY™ Bimodal PE-RT in final stages of commercialization
Polyethylene Raised
Temperature Pipe (PE-RT)
• Pipe for hot and cold water
• Applications:
– Type I: Under floor heating
(20oC – 90oC, 2-10 bar)
– Type II: Industrial radiator water pipes
Consumer & Brand-owner
Requirements
• Meet ASTM / ISO standards
• Production: High throughput
• Flexible: Faster / easier installation
• Durable: Low failure rate, long
service life
17.1% 17.5% 18.7% 19.0% 20.1%
2011 2012 2017 2018 2023
Polymer Demand for Hot & Cold Plastic Pipes
in Europe, 2011 – 2023, % SharePVCc
PEXc
PEXb
PEXa
PE-RT
PPr
PB1
100%
0%
November 2019
PRODIGY™ Bimodal HDPE Technology –
Advantaged Performance for PE-RT for Hot / Cold Water Pipes
November 2019 14
PRODIGY™ Bimodal PE-RT Resin for Durable, Flexible Pipe Applications
• Exceeds ASTM requirement of SCGR (>500 hrs)
• Greater flexible vs. benchmarks enabled by lower
flex modulus
• Higher shear thinning: Lower viscosity at high
shear rate results in advantaged processability on
extrusion lines
Sample
Tensile
Yield
(MPa)
Flex Modulus
2% Sec
(MPa)
OIT
@ 210°C
(min)
PENT @
90°C 2.4 MPa
(hrs)
PRODIGY™
PE-RT18.5 590 >100 >3000
Benchmark
Grade 118.1 635 68 197
Benchmark
Grade 217.6 658 49 >1000
Exceeds hydrostatic failure requirements
High slow crack growth resistance (PENT)
Excellent processability
Good melt strength
Thermally stable
Du
rab
ilit
y /
Serv
ice L
ife
PRODIGY™ Bimodal HDPE Technology –
Delivers Superior Performance for Pressure Pipe
November 2019
15
HDPE Pipe Attributes
• Strength: Pressure, SCGR, impact
• Corrosion resistant
• Low installation cost: Conventional, trenchless
• Leak resistant: Long lengths and strong joints
• Durable: Long-term performance
Graph sources: ASCE 2017 Infrastructure Report Card – Drinking Water; and S. McKellar, UKWIR National Mains Failure Database,
Plastics Pipes XIII Symposium Conference Proceedings, October 2-5, 2006.
HDPE Outperforms Other Materials
for Water Pipe
Water Main Failure Rates
Across Different Materials
HDPE Less LeakageIron
PVC
Asbestos
Cement
Ductile
Iron
PE
Fa
ilu
res
pe
r 1
00
km
/ye
ar
• Higher-stress crack material
• Large diameter thick-pipe with higher melt
strength
Current PE Pressure Pipe TrendsDu
rab
ilit
y /
Serv
ice L
ife
Feb 2019
PRODIGY™ Bimodal HDPE Technology –
Exceeds Requirements for PE100 Pipe Certification
November 2019
PRODIGY™ Bimodal HDPE PE100 Product Performance
0 %
100 %
200 %
300 %MRS
SCGRRCP
PRODIGY™ Bimodal HDPE Based Pipe
ISO PE100 Requirements
• MRS10 pressure rating
• Balance of SCGR and RCP
• Durable: 50 to 100 year service life
• Installation: Good weldability
• Extrusion processability: High melt strength
for large pipesDu
rab
ilit
y /
Serv
ice L
ife
16
MRS
SCGRRCP
Photo image courtesy of Qenos Pty Ltd
PRODIGY™ Bimodal HDPE Technology –
Aim-grade Pipe Extrusion & Faster Field Installation
November 2019
PRODIGY™ Bimodal HDPE Resin Efficient Pipe Production & Field Installation
• Excellent pipe dimensional stability
• Raw material savings with lower target wall thickness
• More efficient pipe installation due to pipe matching
during welding
Installation of PRODIGY™-based
1,000 mm Diameter Pipe
Butt Welding PRODIGY™ Bimodal HDPE
based Pipe in the Field
Du
rab
ilit
y /
Serv
ice L
ife
17Photo images courtesy of Qenos Pty Ltd
• Container lids, kitchenware, baskets, buckets
• Food storage boxes, crates and totes
• Tubs and containers for dairy products and other
food items
• Lawn and garden equipment and tool parts
UNIPOL™ PE Injection Molding Product
Competitive Injection Molding Grade
November 2019 18
• UNIPOL™ PE Grades well-recognized industry
benchmark for injection molding (IM) grades
• Robust IM grade portfolio
• Excellent product consistency
• Superior IM part performance
• Excellent balance of properties equivalent
or superior to other competing resins
UCAT™ J HDPE / LLDPE Technology –
Provides Consumers with Durable, Low-cost IM Products
UNIPOL™ HDPE Performance Attributes
Broad Application Range for Household Use
Du
rab
ilit
y /
Serv
ice L
ife
ACCLAIM™ Unimodal HDPE Technology –
Thick-films for Reusable Bags Applications
November 2019 19
Recycla
bil
ity /
Reu
se
• High quality thin-films: Grocery sacks, trash
can liners
• Performance: Good processability,
excellent toughness
Consumer & Brand-owner Requirements
UNIPOL™ HDPE Performance Attributes
• Seeking sustainable alternatives to thin-film
grocery sack / t-shirt bags
• Advantaged alternative enabling circular
economy considerations vs. thin-film, paper
Thin-Film Bag Thick-Film Bag
Thick-film Bag Advantages
• Sustainable: >100 times reuse, then recycle
• Durable: Increased tear / puncture resistance
• Weight: Less likely to enter environment
UNIPOL™ PE Products Provide Outstanding Performance and Delivers
Sustainability Benefits in so Many Different Ways…
November 2019 20
…and is the Only Technology That Covers the Full HDPE / LLDPE
Product Range in a Single-Reactor Platform
UNIPOL™ PE Technology –
Sustainability & Performance for HDPE Products
Recyclability / Reuse Resource Conservation
Durability / Service Life Light-weighting
Visit us at www.univation.dow.com
Dr. Brij [email protected]
Trademarks
Univation Technologies, LLC is the world leader in licensing gas-phase polyethylene
technology and selling related catalysts, services, and products. UNIVATION, XCAT,
PRODIGY, PREMIER, ACCLAIM, stylized “Univation Technologies,” and the stylized "U"
are registered trademarks (Reg. U.S. Pat. and Tm. Off. and other countries) of Univation
Technologies. UNIPOL and UCAT are trademarks of The Dow Chemical Company (“Dow”)
or an affiliated company of Dow, licensed for use to Univation Technologies.
© 2019 Univation Technologies, LLC. All Rights Reserved.
November 2019 22