understanding the care and use of the pocketshear ™

PocketShear™ Lite

Copyright 2010, Tiger Industries Corporation, all rights reserved10907 shady Trail Suite #105 Dallas, Texas 75220

214-654-0696 FAX: 214-654-0697

• Understanding the care and use of the PocketShear™

PocketShear™ Lite


214-654-0696 FAX: 214-654-0697

PocketShear™ Lite


214-654-0696 FAX: 214-654-0697

Recharge of a fully discharged battery = 50 min.

Recharge of a partially discharged battery = 10 to 15 min.

PocketShear™ Lite


214-654-0696 FAX: 214-654-0697

PocketShear™ Lite


214-654-0696 FAX: 214-654-0697

A NEW, slim nosepiece profile fits in any pocket

in the USA.

All Standard Pockets

All Encapsulated Pockets

All 4/5 Strand Pockets

PocketShear™ Lite


214-654-0696 FAX: 214-654-0697

PocketShear™ Cut Oxyacetylene Cut

PocketShear™ Lite


214-654-0696 FAX: 214-654-0697

• 1/2” Strand - 60 to 70 cuts per fully charged battery

PocketShear™ Lite


214-654-0696 FAX: 214-654-0697

• .6” Strand - 30 to 35 cuts per fully charged battery

PocketShear™ Lite


214-654-0696 FAX: 214-654-0697

PocketShear™ Lite


214-654-0696 FAX: 214-654-0697

• The clamp keeps the cut tendon end from releasing over the side of the structure

PocketShear™ Lite


214-654-0696 FAX: 214-654-0697

• The clamp keeps the cut tendon end from releasing over the side of the structure

• The clamp secures the cut tendon end, holding the individual wires from flying out of the device

PocketShear™ Lite


214-654-0696 FAX: 214-654-0697

• NEVER stand at the rear of the PocketShear during the cutting cycle

PocketShear™ Lite


214-654-0696 FAX: 214-654-0697

• SAFETY

PocketShear™ Lite


214-654-0696 FAX: 214-654-0697

• SAFETY• Always use safety glasses

PocketShear™ Lite


214-654-0696 FAX: 214-654-0697

• SAFETY• Always use safety glasses• Always follow good safety practice as

indicated by OSHA

PocketShear™ Lite


214-654-0696 FAX: 214-654-0697


indicated by OSHA• Always follow jobsite specific safety rules

PocketShear™ Lite


214-654-0696 FAX: 214-654-0697


indicated by OSHA• Always follow jobsite specific safety rules• NEVER stand behind a PocketShear during

cutting operations

PocketShear™ Lite


214-654-0696 FAX: 214-654-0697

PocketShear™ Lite


214-654-0696 FAX: 214-654-0697

What is wrong with this movie?

• Operator not tied off

• PocketShear™ not tied off

Watch this short movie

demonstrating the proper use of the

PocketShear™

PocketShear™ Lite


214-654-0696 FAX: 214-654-0697

Additional Movies

• Hi Rise• Parking Garage• SOG 4 strand flat Duct• Bridge Deck Transverse .6” Tendons• SOG Remediation• Safety Related - Stressing Blowout

• http://www.pocketshear.com• http://www.posttension.net

CLICK HERE FOR LAST

SLIDE

PocketShear™ Lite


214-654-0696 FAX: 214-654-0697

Tiger Industries Corporation10907 Shady Trail, Suite 105

Dallas, Texas 75220

214-654-0696 FAX: 214-654-0697Email: [email protected]

http://www.pocketshear.comhttp://www.posttension.net

understanding the care and use of the pocketshear ™

Documents