SERIESUMCHOUSING - The driver compartments shall be one-piece die cast aluminum. The luminous rings shall be clear acrylic with an internal lens. The hood and spacers shall be heavy gauge and spun aluminum with hemmed edges for added rigidity. The hood wing assembly shall be fully sealed with a molded silicone gasket. All internal and external hardware shall be stainless steel. The hood wing assembly shall be fully sealed with a molded silicone gasket. the UMC is BUG rated

OPTICAL - All optical systems shall provide IES Types II, III, IV, V, Custom, distributions. Standard color temperatures shall be 2700K, 3000K, 3500K, 4000K, 5100K, and Amber. UMC offers MicroCore LED modules that independently aim each LED in both horizontal rotation and vertical tilt angle. LEDs shall be mounted to a metal printed circuit board assembly(PCBA) with a uniform conformal coating over the panel surface and electrical features. LED optics shall be clear injection molded PMMA acrylic. MicroCore PCBA and optic shall be sealed to a die-cast anodized aluminum heat sink with an injection molded silicone rubber gasket. IP66.Type 4 distribution with optional House Side Shield not available with clear or diffused glass lenses. Factory installed House Side Shield is optimized for Type 4 distribution and not recommended for use with Type 2 or 3 distribution and not available with type 5 distribution.

ELECTRICAL - All luminaries shall accept 120 thru 277 volt input with integral surge protection that shall be U.L. recognized and have a surge current rating of 10,000 Amps using the industry standard 8/20uSec wave and surge rating of 372J. Drivers shall be U.L recognized with an inrush current maximum of <20.0 Amps maximum at 230VAC. Drivers shall not be compatible with current sourcing dimmers, consult WLS for current list of known compatible dimming systems.

MOUNTING - The �xture shall be attached to the arm assembly with three stainless steel bolts.The connection shall be sealed with a silicone gasket. Post top arms and brackets shall slipover a 4"/100mm O.D. or a 5”/127mm as con�gured and secured with six stainless steel set screws. Wall mounted arms and brackets shall require mounting hardware by others.

FINISH - Fixture �nish consists of a �ve stage pretreatment regimen with a polymer primer sealer, oven dry o� and top coated with a thermoset super TGIC polyester powder coat �nish.The �nish shall meet the AAMA 605.2 performance speci�cation which included passing a 3000hour salt spray test for corrosion resistance.

CERTIFICATION - Listed with ETL for outdoor, wet location use. Conforms to UL1598 and Canadian CSA Std.C22.2 no.250 standard. Micro Core Optical arrays shall be constructed to IP66 standards.

SPECIFICATIONS

Approved By: Project Name:

Location: Date:

800.633.8711 www.wlslighting.com1919 Windsor Place Fax: 817.735.4824 Fort Worth, TX 76110

WLS LIGHTING SYSTEMS

Speci�cations subject to change without notice. 40 Rev. 5/16

DECORATIVE LED

LUMINAIRE PERFORMANCE

Secondary Lens or Shield Distribution System

Watts

3KDrive

Current (ma)

Delivered Lumens

Efficacy (lm/w)

Bug Rating

B U G

No Lens (Standard)

TYPE 2 6186 87 2 0 2

650 71

TYPE 3 6168 87 1 0 2TYPE 4 6081 86 1 0 2TYPE 5 6227 88 3 0 2

House Side Shield TYPE 4 4495 63 0 0 2

No Lens (Standard)

TYPE 2 4607 98 2 0 2

450 47

TYPE 3 4570 95 1 0 1TYPE 4 4570 97 1 0 2TYPE 5 4602 98 3 0 1

House Side Shield TYPE 4 3366 72 0 0 2

4K

Delivered Lumens

Efficacy (lm/w)

Bug Rating

B U G6561 92 2 0 26542 92 1 0 26449 91 1 0 26505 93 3 0 2

4768 67 0 0 2

4830 103 2 0 24791 100 1 0 24791 102 1 0 24825 103 3 0 1

3529 75 0 0 2

Secondary Lens or Shield Distribution

No Lens (Standard)

TYPE 2TYPE 3TYPE 4TYPE 5

House Side Shield TYPE 4

No Lens (Standard)

TYPE 2TYPE 3TYPE 4TYPE 5

House Side Shield TYPE 4

System Watts

Drive Current

(ma)

650 71

450 47

5K

Delivered Lumens

Efficacy (lm/w)

Bug Rating

B U G6579 92 2 0 26560 92 1 0 26467 91 1 0 26623 93 3 0 2

4781 67 0 0 2

4844 101 2 0 24805 101 1 0 24805 100 1 0 24839 101 3 0 1

3539 74 0 0 2

Secondary Lens or Shield

Distribution

No Lens (Standard)

TYPE 2TYPE 3TYPE 4TYPE 5

House Side Shield TYPE 4

No Lens (Standard)

TYPE 2TYPE 3TYPE 4TYPE 5

House Side Shield TYPE 4

System Watts

Drive Current

(ma)

650 71

450 47

DLC Quali�ed

Mounting

UMC DECORATIVE LED

ORDERING INFORMATION

UE - Universal Voltage (120-277)347 - 347VAC480 - 480 VAC

27K - 2700K ¹3K - 3000K¹35K - 3500K4K - 4200K5K - 5100KAM - >580 nm mono- chromatic amber ¹

ORDER:

700 - 71 watts450 - 48 wattsXMA - Custom wattage or drive current ¹

WLS-UMC

SERIES HOOD DISTRIBUTION COLOR TEMP LUMEN PACK FINISH OPTIONS VOLTAGE MOUNTING

SERIES

UMC-LUM ANG T5-32LED 27K 700 MTB BL-SCP UE PM-SLA2(EXAMPLE ORDER)

FTG - Clear �at glass lens ²SAG - Clear sag glass lens ¹,³ HSS - House side shield, for Type IVSLC - Unlit (luminous) elementFLD - Lightly di�used �nish on �at glass ³ lensR80 - 80 CRI, minimum¹BL - Blue inner lensRD - Red inner lensGRN - Green inner lensSCP - Integral photo- control and motion sensorSCPRM - Handheld commissioning tool

T2-32LED - Type IIT3-32LED- Type IIIT4-32LED - Type IVT5-32LED - Type VTX-32LED - Custom ¹

SELECT APPROPRIATE CHOICE FROM EACH COLUMN TO FORMULATE ORDER CODE. Refer to example below.

Approved By: Project Name:

Location: Date:

800.633.8711 www.wlslighting.com1919 Windsor Place Fax: 817.735.4824 Fort Worth, TX 76110

Speci�cations subject to change without notice. 40 Rev. 5/16

NO LUMINOUS UMC - Without luminous element

LUMINOUS

UMC-WND - Luminous WindowUMC-SR - Luminous Solid RingsUMC-VSL - Luminous Vertical SlotsUMC-LUM - Luminous Rings

PM - Pole Mount SLA2 SLA4 SLA7(5) SLA8D SLA9-2 SLA10-2 SLA16-2 SLA17-2 SLA17(5)-2 SLA18-2 SLA20-2 SLA20A-2 SLA20B-2 SLA20C-2 SLA20D-2 SLA24 SLA24(5) TRA4 TRA7-2 TRA8-2 TRA9-2 SLA3 SLA4-2 SLA7-2 SLA7(5)-2 SLA9 SLA10 SLA16 SLA17 SLA17(5) SLA18 SLA20 SLA20A SLA20B SLA20C SLA20D SLA22D SLA24-2 SLA25(5)-2 TRA7 TRA8 TRA9WM - Wall Mount WMA4 WMA6 WMA9D WMA11 WMA16 WMA18 WMA22D WMA37 WMA39 WMA5 WMA8 WMA10 WMA12 WMA17 WMA20 WMA24 WMA38*Info on Page 4

WH - Arctic WhiteBL - BlackBLT - Matte BlackDGN - Dark GreenDB - Dark BronzeTT - TitaniumWDB - Weathered BronzeMDB - Metallic BronzeVBU - Verde BlueCRT - CortenMAL - Matte AluminumMG - Medium GreyAGN - Antique GreenLG - Light GreyRAL - Premium Color (Provide RAL)CC - Custom Color, consult factory

FLR - Flared HoodFLR-STS - Flared Hood, natural brushed stainless steelFLR-COP - Flared Hood, natural brushed copperANG - Angled Hood, ANG-STS - Angled Hood, natural brushed stainless steel ANG-COP - Angled Hood, natural brushed copperSTR - Straigh Hood, STR-STS - Straigh Hood, natural brushed stainless steelSTR-COP - Straigh Hood, natural brushed copper BEL - Bell Hood, BEL-STS - Bell Hood, natural brushed stainless steelBEL-COP - Bell Hood, natural brushed copper SKB - Skirted Bell Hood, SKB-STS - Skirted Bell Hood, natural brushed stainless steel SKB-COP - Skirted Bell Hood, natural brushed copper

1 - Contact Factory2 - Not for AM color temperature3 - Not for SCP contol options4 - Handheld commissioning tool is required to seperatly con�gure or adjust any number of SCP sensors

FOOTNOTES:

4

4

UMC DECORATIVE LED

SERIES

Approved By: Project Name:

Location: Date:

800.633.8711 www.wlslighting.com1919 Windsor Place Fax: 817.735.4824 Fort Worth, TX 76110

Speci�cations subject to change without notice. 40 Rev. 5/16

ANGLED HOOD CONFIGURATION UMC-ANG UMC-WND-ANG UMC-SR-ANG UMC-VSL-ANG UMC-LUM-ANGDIAMETER 20"/508mm 20"/508mm 20"/508mm 20"/508mm 20"/508mmHEIGHT 14.7"/373mm 20.5"/520mm 20.7"/526mm 20.5"/521mm 20.6"/523mmWEIGHT 18.25 lbs/8.28kg 21.75 lbs/9.86kg 25 lbs/11.3kg 22.25 lbs/10.1kg 24.25 lbs/11kgEPA .60 .72 .74 .72 .74

BELL HOOD CONFIGURATION UMC-BEL UMC-WND-BEL UMC-SR-BEL UMC-VSL-BEL UMC-LUM-BELDIAMETER 24"/610mm 24"/610mm 24"/610mm 24"/610mm 24"/610mmHEIGHT 15.8"/401mm 21.4"/543mm 21.6"/549mm 19.37"/492mm 21.5"/546mmWEIGHT 20.25 lbs/9.2kg 23.5 lbs/10.6kg 27 lbs/12.25kg 24.25 lbs/11kg 26 lbs/11.8kgEPA .73 .85 .87 .85 .85

FLARE HOOD CONFIGURATION UMC-FLR UMC-WND-FLR UMC-SR-FLR UMC-VSL-FLR UMC-LUM-FLRDIAMETER 22"/559mm 22"/559mm 22"/559mm 22"/559mm 22"/559mmHEIGHT 14.5"/368mm 19.8"/503mm 20.1"/510mm 19.8"/503mm 20"/508mmWEIGHT 18.5 lbs/8.4kg 21.75 lbs/9.87kg 25.25 lbs/10.1kg 21.75 lbs/9.86kg 24.25 lbs/11kgEPA .53 .65 .67 .65 .67

STRAIGHT HOOD CONFIGURATION UMC-STR UMC-WND-STR UMC-SR-STR UMC-VSL-STR UMC-LUM-STRDIAMETER 24"/610mm 24"/610mm 24"/610mm 24"/610mm 24"/610mmHEIGHT 14"/355mm 19.8"/503mm 20"/508mm 19.8"/503mm 19.9"/505mmWEIGHT 20 lbs/9.07kg 23.25 lbs/10.55kg 26.75 lbs/12.13kg 23.75 lbs/10.77kg 25.75 lbs/11.68kgEPA .59 .71 .73 .71 .73

SKIRTED BELL HOOD CONFIGURATION UMC-SKB UMC-WND-SKB UMC-SR-SKB UMC-VSL-SKB UMC-LUM-SKBDIAMETER 24"/610mm 24"/610mm 24"/610mm 24"/610mm 24"/610mmHEIGHT 19.7"/500mm 23.9"/607mm 24.2"/615mm 23.9"/607mm 24.1"/612mmWEIGHT 20.5 lbs/9.3kg 23.75 lbs/10.77kg 27 lbs/12.25kg 24.25 lbs/11kg 26.25 lbs/11.9kgEPA .90 1.03 1.05 1.03 1.05

UCM-LUM-SKB

UMC DECORATIVE LED

SERIES

Approved By: Project Name:

Location: Date:

800.633.8711 www.wlslighting.com1919 Windsor Place Fax: 817.735.4824 Fort Worth, TX 76110

Speci�cations subject to change without notice. 40 Rev. 5/16

24.2 in

20.1 in 20.0 in

500 mm

24.0 in610 mm

6 in152 mm

6 in152 mm

WMA 8 Backplate is 12 "/305mm x 6 "/150mm WT: 10 lbs.

24.0"610mm

6"152mm

6"152mm

20.0"500mm

48.1 in

25.2 in 25.0 in

635 mm

48.0 in1220 mm

5 in127 mm

6 in152 mm

WMA 11 Backplate is 26 "/660mm x 6 "/150mmWT: 10 lbs.

5"127mm

6"152mm

25.0"635mm

48.0"1220mm

39.4 in

27.0 in 27.0 in

670 mm

39.0 in990 mm

1 1/2 in38 mm

6 in152 mm

WMA 12 Backplate is 12 "/305mm x 6 "/150mm

WT: 12 lbs.

1.50"38mm

6"152mm

27.0"670mm

39"990mm

28.5 in 28.0 in

710 mm

44.2 in 44.0 in1120 mm

6 in152 mm

9 in229 mm

WMA 16 Backplate is 44 "/112 0mm x 6 "/150mmWT: 22 lbs.

44.0"1120mm

28.0"710mm

9"229mm

6"152mm

26.0 in/660mm34.0 in/864mm*

40.0 in/1015mm46.5 in/1180mm*

SLA 17 Slips over 4"/100mm O.D. pole.

WT: 18 lbs. E P A: 1.50 *SLA 17(5) Slips over 5 "/127mm O.D. pole.

WT: 24 lbs. E P A: 2.20

Strap painted to match �xture color.

40"/1015mm46.5"/1180mm*

26"/660mm34"/864mm

30.0 in 762 mm

28.0 in710 mm

SLA 18 Slips over 4 "/100mm O.D. pole. WT: 12 lbs. E P A: .85

28"710mm

30"762mm

31.0 in 31.0 in787 mm

24.75 in630 mm

31.0 in 31.0 in787 mm

28.0 in710 mm

SLA 18-2 Twin arms, slips over 4 "/100mm O.D. pole.WT: 22 lbs. E P A: 1.59

31"787mm

28"710mm

52.0 in/1320mm68.0 in/1727mm*

40.0 in/1015mm46.5 in/1180mm*

SLA 17-2 Twin arms, slips over 4"/100mm O.D. pole.

WT : 24 lbs. E P A: 2.05*SLA 17(5)-2 Twin arms, slips over 5"/127mm O.D. pole.

WT: 33 lbs. E P A: 2.90

Straps painted to match �xture color.

40"/1015mm46.5"/1180mm*

52"/1320mm68"/1727mm

41.1 in 41.0 in1040 mm

30.1 in 30.0 in

970 mm

SLA 16 Slips over 4 "/100mm O.D. pole. WT: 18 lbs. E P A: 2.88

41"1040mm

30"970mm

41.1 in mm

60.0 in 60.0 in1525 mm

41.0 in1040 mm

SLA 16-2 Twin arms, slips over 4 "/100mm O.D. pole.WT: 28 lbs. E P A: 4.38

60"1525mm

41"1040mm

10.5 in/267mm

19.5 in/495mm

SLA 20 Slips over 4 "/100mm O.D. pole. WT: 10 lbs. E P A: .70

10.5"267mm

19.5"495mm

39.0 in990 mm

10.5 in/267mm

SLA 20-2 Twin arms, slips over 4 "/100mm O.D. pole.WT: 18 lbs. E P A: 1.25

10.5"267mm

39"990mm

39.0 in 39.0 in

990 mm

27.9 in 32.0 in815 mm

SLA 20A-2 Twin arms, slips over 4 "/100mm O.D. pole.WT: 26 lbs. E P A: 1.94

32"815mm

39"990mm

19.4 in 19.5 in

495 mm

27.9 in 32.0 in815 mm

SLA 20A Slips over 4 "/100mm O.D. pole. WT: 15 lbs. E P A: 1.30

32"4815mm

19.5"495mm

19.4 in 19.5 in495 mm

27.9 in 32.0 in815 mm

SLA 20B Slips over 4"/100mm O.D. pole.

WT: 14 lbs. E P A: 1.14

32"815mm

19.5"495mm

27.9 in 32.0 in815 mm

39.0 in 39.0 in

990 mm

SLA 20B-2 Twin arms, slips over 4"/100mm O.D. pole.WT: 24 lbs. E P A: 1.70

32"815mm

39"990mm

34.0 in 32.0 in815 mm

39.0 in 39.0 in

990 mm

SLA 20C-2 Twin arms, slips over 4 "/100mm O.D. pole.WT: 26 lbs. E P A: 1.91

32"815mm

39"990mm

19.3 in 19.5in495 mm

26.0 in/660mm

SLA 20D Slips over 4 "/100mm O.D. pole. WT: 12 lbs. E P A: .75

Strap painted to match �xture color.

26"660mm

19.5"495mm 39.0 in 39.0 in

990 mm

26.0 in/660mm

SLA 20D-2 Twin arms, slips over 4 "/100mm O.D. pole.WT: 21 lbs. E P A: 1.18

Straps painted to

match �xture color.

26"660mm

39"990mm

38.0 in/965mm42.0 in/1070mm*

21.0 in/535mm27.0 in/685mm*

SLA 24 Slips over 4"/100mm O.D. pole.

WT: 9 lbs. E P A:.85 *SLA 24(5) Slips over 5 "/127mm pole. WT: 11 lbs. E P A: 1.17

38"/965mm42"/1070mm*

21"/535mm27"/6850mm

38.0 in/965mm42.0 in/1070mm*

42.0 in/1070mm56.0 in/1422mm*

SLA 24-2 Twin arms, slips over 4"/100mm O.D. pole. WT: 14 lbs. E P A: 1.59

*SLA 24(5)-2 Twin arms, slips over 5 "/127mm pole. WT: 16 lbs. E P A: 1.81

38"/965mm42"/1070mm*

42"/1070mm56"/1422mm

34.0 in 32.0 in815 mm

19.4 in 19.5 in

495 mm

SLA 20C Slips over 4 "/100mm O.D. pole. WT: 15 lbs. E P A: 1.39

32"815mm

19.5"495mm

25.0 in 25.0 in

635 mm

36.1 in 36.0 in

915 mm

5 1/8 in

6 in152 mm

130 mm

WMA 17 Backplate is 36 "/915mm x 6 "/150mm WT: 15 lbs.

Strap painted to match �xture color.

36.0"915mm

25.0"635mm

6"152mm

5.125"130mm

25.0 in 25.0 in

635 mm

26.1 in 26.0 in660 mm

5 in127 mm

6 in152 mm

WMA 18 Backplate is 26 "/660mm x 6 "/150mm

WT:18 lbs.

6"152mm

5"127mm

26"660mm

25"635mm

WMA 20 Backplate is 10 "/255mm x 8 "/205mm WT: 12 lbs.

17.6 in 19.5 in495 mm

10.1 in 10.0 in

255 mm

8 in203 mm

5 in127 mm

8"203mm

5"127mm

10"255mm

19.5"495mm

WMA 24 Backplate is 26 "/660mm x 6 "/150mmWT: 12 lbs.

22.6 in

31.0 in

22.5 in575 mm

31.0 in790 mm

6 in152 mm

16 in406 mm

31"790mm16"

406mm

22.5"575mm

6"152mm