Ultra 4K Tool Box

UHD Tools for new TV standards The Omnitek Ultra 4K Tool Box provides a unique and unparalleled suite of tools for the analysis, conversion and generation of Ultra HDTV and Digital Cinema video signals in current formats up to 4096x2160/60, helping manufacturers to design products and enabling broadcast engineers, networks, telcos, outside broadcast units, systems integrators and researchers to build, test and commission UHD and 4K systems with complete confidence.

Containing a complete solution, the Ultra 4K Tool Box offers a variety of connection formats - multi-rate SDI, HDMI and DisplayPort 4K - for both video source and display. Conversion between cable and image formats allows operation in multi-format video environments, while comprehensive and advanced SDI physical layer analysis features enable system designers to rapidly locate sources of signal error in all paths up to 12G-SDI single link 4K/60Hz.

SDI Analysis The ANALYSE option provides a comprehensive range of instruments required to analyse the video, metadata and audio of the SDI data stream.

User-configurable display with presets

Picture - high quality, full-size, full-frame-rate, active video and full-raster modes

SD, HD, 3G, 6G and 12G-SDI

Zoom View

Gamut Meters

Status – Monitoring video and physical layer

Data and Cable Views

Data Waveform

Audio Meters and Status

Ancillary Data

Format Converter The CONVERT option allow the up/down/cross conversion between input and output standards.

SD, HD, 3G, 6G and 12G-SDI support

Conversion between appropriate video formats

Conversion between different link structures

Conversion between SQ and 2SI

Simple and intuitive Connections menu

User defined image sharpening/softening

Bit depth and colour space conversion

User Interface The User Interface can be displayed via a web browser on the HDMI HD or DisplayPort HD output.

SNMP Control & Automation

SNMP commands are supported and SNMP traps generated, allowing automation of all aspects of the 4K Tool Box's functionality, and enabling remote control scripting as part of a test infrastructure.

Pattern Generation The GENERATE option allows the generation of stills and sequences in all video standards up to 4K p60 for SDI, HDMI and DisplayPort outputs with Audio Tone.

Pattern and sequence generation from SD to 4K – active video and full-raster (RVF).

Multi-link pattern generation for QL-3G & DL-6G

Colour bars including SMPTE Bars

Multiburst, frequency sweeps, moving Zone Plates

Luma / chroma steps & ramp and pulse & bar

User-defined patterns

Omnitek TSA and user-defined sequences.

4K TSA including quadrant and cable identifiers for cable ordering of multi-link 4K standards.

6G & 12G-SDI Pathological ‘pothole’ test signal

Play back of captured stills and video clips – active video and full-raster.

Patterns loaded from internal SSD, USB or LAN

Independent luma and chroma channel control

Output level & slew-rate control (PHY_ADV)

SDI link timing delay for QL 3G and DL 6G-SDI

Generator lockable to video, ext ref or free run.

Jitter insertion to RP184 into all SDI rates at 0 to 3MHz and up to 4UI pk-pk (PHY_ADV option)

16 simultaneous generated audio tones

12G-SDI Support The VIDEO_12G option provides input, output and instrument support for 12G-SDI signals up to 4K p60.

Physical Layer Analysis The PHY option provides a pair of instruments required to measure signal quality and jitter on SDI interfaces:

Eye Waveform Display up to 6Gb/s

Jitter Meters up to 6Gb/s

Advanced Physical Layer Analysis This PHY_ADV option provides the following:

Eye Pattern up to 12Gb/s

Jitter Measurement up to 12Gb/s

Jitter Waveform up to 12Gb/s

Jitter Histogram up to 12Gb/s

Jitter Spectrum up to 12Gb/s

SDI Analysis Toolset (ANALYSE) Picture Viewer

High quality Variable size SDI up to 4K HDMI to 1920x1080 Native resolution display Point of interest selection

Zoom View

31x31 or 15x15 array Hex or Decimal display User cursor position Point of interest display

Gamut Meters

Intuitive display 6-bar YCbCr & RGB check Real time % display Cursor selection EBU RP 103 compliant

Status Monitor

Video format & image size Physical layer checking Link timecode display Gamut range Signal amplitude & Jitter

Data View

Hex, Hex 8/2 or Decimal SMPTE colour coding Virtual image identification User cursor position Point of interest selection SAV and EAV shortcuts

Cable View

Hex, Hex 8/2 or Decimal SMPTE colour coding User cursor position Point of interest selection SAV and EAV shortcuts

Data Waveform

31 or 15 pixel YUV waveform Hex, Hex 8/2 or Decimal User cursor position Point of interest selection

Ancillary Data

Ancillary status overview 53 common ANC packets 3 user-defined packets Colour-coded status Packet error count Detailed status pages

Timing

Single, dual or quad link Timing against link or ref Graphical display Numerical timing values

Audio Status

Audio format details 4 Audio group display Audio stream selection

Audio PPM

16 audio channels -60dB to 0dB range

Eye Waveform (PHY / PHY_ADV)

SD, HD, 3G, 6G & 12G Automatic measurements Rise and fall time cursors Selectable jitter meter Waveform histograms Single or multiple Eyes

Jitter Meters (PHY / PHY_ADV)

SD, HD, 3G, 6G & 12G 5 live jitter meters SMPTE compliant Persistent jitter cursors Jitter markers

Jitter Waveform (PHY_ADV)

Live jitter display 10Hz to 20MHz spectrum User-defined ranges

Jitter Spectrum (PHY_ADV)

10Hz to 20MHz spectrum Peak jitter table Log / linear scales User-defined ranges

Jitter Histogram (PHY_ADV)

Statistical jitter display 10Hz to 3MHz spectrum User-defined ranges Standard deviation value

Ultra 4K Tool Box Technical Overview

Video Bidirectional I/O

3x SDI 3G/HD/SD

Connection BNC, 75ohm input impedance

Video Inputs

1x SDI (EYE) 12G/6G/3G/HD/SD – supports Eye & Jitter monitoring

Connection BNC, 75ohm input impedance

2x SDI (AUX) 12G/6G/3G/HD/SD

Connection BNC, 75ohm input impedance

HDMI HDMI – supports up to 1080p60

Video Outputs

2x SDI (AUX) 12G/6G/3G/HD/SD

Connection BNC, 75ohm input impedance

DisplayPort DisplayPort 1.2 MST & SST – supports up to 4K/60

HDMI HDMI – supports up to 1080p60

Reference

Sync Input Analogue Black (0.3V p-p) or Tri-level (0.6V p-p)

Connection BNC, 75ohm input impedance

Audio I/O Embedded SDI, HDMI & DisplayPort

Communications, Control & file I/O

Ethernet 1Gb/s

Connection RJ45

2x USB USB 2.0

User Interface

Display HDMI, DisplayPort or HTML over IP

Control USB keyboard and mouse/tracker ball or via browser

Options

VIDEO_12G I/O support for 12G-SDI

ANALYZE Data analysis

GENERATE Multi-format generator

CONVERT Multi-format converter

PHY Physical layer analysis up to 6Gb/s

PHY_ADV Advanced physical layer analysis (requires PHY) and 12Gb/s physical layer support (requires VIDEO_12G)

Video Formats

SDI 4096x2160p - 23.98/24/25/29.97/30/47.952/48/50/59.94/60Hz

3840x2160p - 23.98/24/25/29.97/30/50/59.94/60Hz

2048x1080p - 23.98/24/25/29.97/30/47.952/48/50/59.94/60Hz

1920x1080p - 23.98/24/25/29.97/30/50/59.94/60Hz

2048, 1920x1080sF - 23.98/24/25/29.97/30Hz

2048, 1920x1080i - 50/59.94/60Hz

1280x720p - 23.98/24/25/29.97/30/50/59.94/60Hz

720x486i - 59.94, 576i - 50Hz

Sampling 4:2:2, 4:4:4 - Y, Cr, Cb, R, G, B - 8, 10, 12 bits

HDMI 1280x720p - 50/60Hz

1920x1080p - 50/60Hz

DisplayPort 1280x720p - 50/60Hz

1920x1080p - 50/60Hz

3840x2160p - 30/50/60Hz

Standards SMPTE

UHDTV1 50/60 12G-SDI ST 2082-10 (2SI)

Dual-link 6G-SDI ST 2081-11 (2SI)

Quad-link 3GA-SDI/3GB-SDI ST 425-5 (2SI and SQ)

UHDTV1 25/30 6G-SDI ST 2081-10 (2SI)

Dual-link 3GB-SDI ST 425-3 (2SI and SQ)

Quad-link HD-SDI (SQ)

HD 1080p 3GA-SDI/3GB-SDI/3GB-DS-SDI/Dual-link HD-SDI ST 425-1, 372

HD/SD HD-SDI/SD-SDI ST 2048-2, 274, 296, 259

2SI = 2 Sample Interleaved, SQ = Square Division

Colour spaces ITU-R BT.601, ITU-R BT.709, ITU-R BT.2020

Environmental

Power 12V DC 60W. PSU 100-240V AC 50-60Hz

Size/Weight 215mm x 233mm x 42mm, 1.7Kg

Temperature Operational: +5...+35C

Storage: -20...+50C

Humidity <95% non-condensing

Systems 4K Tool Box with Analyser, Generator, Converter, PHY to 6G.

Also as separate Analyser, Generator or Converter to 6G

DisplayPort input * Reserved for future use SFP + Cage * Reserved for future use CVBS * Future implementation

Omnitek reserves the right to change specifications without notice. Please refer to the Omnitek web site for the latest specifications.

About Omnitek

Omnitek is the product division of Image Processing Techniques Ltd., a leading independent consultancy company specializing in the design of products for the broadcast, post-production, and digital film industries. Since 1998, IPT has completed many successful design projects for major equipment manufacturers in Europe, Asia, and the United States. For more information, please visit www.omnitek.tv

V2.2 Copyright © Omnitek / Image Processing Techniques 2016

UK Head Office

Intec 3, Level 1 Wade Road Basingstoke Hampshire RG24 8NE T: +44 (0)1256 345900 F: +44 (0)1256 345901 E: sales@omnitek.tv www.omnitek.tv

US Head Office

8177 Talliho Drive Indianapolis IN 46256 T: 317-437-9696 E: tom.oneill@omnitek.tv