type approval certificate - imes · 2020. 10. 7. · this certificate is issued to imes gmbh...

19
REGIONE PIEMONTE BU2S1 09/01/2014 Deliberazione del Consiglio regionale 23 dicembre 2013, n. 260 – 40596 Recepimento dell’Accordo approvato dalla Conferenza Unificata in data 17 ottobre 2013 relativo alle strutture residenziali psichiatriche e adozione del relativo nuovo modello residenziale con conseguente revisione della deliberazione del Consiglio regionale 28 gennaio 1997, n. 357-1370. (omissis) Il Consiglio regionale visto il decreto del Presidente della Repubblica 14 gennaio 1997 (Approvazione dell'atto di indirizzo e coordinamento alle regioni e alle province autonome di Trento e di Bolzano, in materia di requisiti strutturali, tecnologici ed organizzativi minimi per l'esercizio delle attività sanitarie da parte delle strutture pubbliche e private) con il quale sono stati approvati i requisiti strutturali, tecnologici ed organizzativi minimi richiesti per l’esercizio delle attività sanitarie da parte delle strutture pubbliche e private; visti i decreti del Presidente della Repubblica 7 aprile 1994 (Approvazione del progetto-obiettivo Tutela della salute mentale 1994-1996) e 10 novembre 1999 (Approvazione del progetto obiettivo Tutela della salute mentale 1998-2000) che hanno istituito, nell’ambito della psichiatria di comunità, il modello dell’organizzazione dipartimentale articolato in una rete integrata di servizi e strutture; considerato che la deliberazione del Consiglio regionale 28 gennaio 1997, n. 357-1370 (Standards strutturali ed organizzativi del dipartimento di salute mentale. Modifica della D.G.R. n. 191 – 37198 del 17/4/1990 ratificata dal Consiglio Regionale con deliberazione n. 9 – 9044 del 29/7/1990 e della D.C.R. n. 245–11504 del 31/7/1986) ha stabilito gli standards strutturali, organizzativi e gestionali del dipartimento di salute mentale e delle strutture psichiatriche territoriali, disciplinando gli interventi di tipo economico e gli interventi alternativi al ricovero e all’inserimento in strutture residenziali protette; considerato inoltre che, la deliberazione del Consiglio regionale 22 febbraio 2000, n. 616-3149 (Decreto del Presidente della Repubblica 14 gennaio 1997 recante atto di indirizzo e coordinamento alle Regioni ed alle Province autonome di Trento e Bolzano, in materia di requisiti strutturali, tecnologici ed organizzativi minimi per l’esercizio delle attività sanitarie da parte delle strutture pubbliche e private. Disposizioni di attuazione), ha approvato i requisiti strutturali, tecnologici ed organizzativi minimi per l’autorizzazione all’esercizio delle attività sanitarie da parte di strutture pubbliche e private nonchè i requisiti strutturali, tecnologici ed organizzativi ulteriori per l’accreditamento delle strutture sanitarie pubbliche e private e ha definito, inoltre, le procedure ed i tempi per l’adeguamento delle strutture sanitarie pubbliche e private ai requisiti previsti; tenuto conto che la Conferenza Unificata ha approvato, in data 20 marzo 2008, le Linee di indirizzo nazionali sulla salute mentale che individuano le priorità strategiche nello sviluppo dei servizi, promuovendo, in particolare, i servizi finalizzati ai percorsi di ripresa e la salute mentale nella comunità e sottolineando, con specifico riferimento alla residenzialità, che devono essere evitate forme di ricovero improprie in strutture non deputate alla cura del disagio psichico e modelli di accorpamento delle strutture; considerato che la deliberazione della Giunta regionale 28 settembre 2009, n. 63-12253 (Requisiti e procedure per l’accreditamento istituzionale delle strutture residenziali e semi residenziali socio

Upload: others

Post on 15-Feb-2021

1 views

Category:

Documents


0 download

TRANSCRIPT

  • This certificate is issued to

    IMES GmbHKaufbeuren - GERMANY

    for the type of product

    PRESSURE TRANSMITTERS / TRANSDUCERSCylinder Pressure Sensor

    CPS-01, CPS-01CA, CPS-01CA K1000, CPS-03, CPS-03CA,FPS-01CA, FPS-02CA, HTT-04 CA, HTT-06, HTT-06CA, TCS-01CA

    Requirements:Bureau Veritas Rules for the Classification of Steel ShipsEC Code: 33

    Page 1 / 3

    Certificate number: 22266/C1 BVFile number: AP 4048Product code: 3891H

    This certificate is not valid when presented without the full attached schedulecomposed of 7 sections

    www.veristar.com

    TYPE APPROVAL CERTIFICATE

    This certificate is issued to attest that Bureau Veritas Marine & Offshore did undertake the relevant approval procedures for the product identifiedabove which was found to comply with the relevant requirements mentioned above.

    This certificate will expire on: 10 Feb 2025

    For Bureau Veritas Marine & Offshore,At BV HAMBURG, on 01 Oct 2020,

    Dirk Hoepfner

    This certificate remains valid until the date stated above, unless cancelled or revoked, provided the conditions indicated in the subsequent page(s) are compliedwith and the product remains satisfactory in service. This certificate will not be valid if the applicant makes any changes or modifications to the approved product,which have not been notified to, and agreed in writing with Bureau Veritas Marine & Offshore. Should the specified regulations or standards be amended duringthe validity of this certificate, the product(s) is/are to be re-approved prior to it/they being placed on board vessels to which the amended regulations or standardsapply. This certificate is issued within the scope of the General Conditions of Bureau Veritas Marine & Offshore available on the internet site www.veristar.com.Any Person not a party to the contract pursuant to which this document is delivered may not assert a claim against Bureau Veritas Marine & Offshore for anyliability arising out of errors or omissions which may be contained in said document, or for errors of judgement, fault or negligence committed by personnel of theSociety or of its Agents in establishment or issuance of this document, and in connection with any activities for which it may provide.

    The electronic version is available at: http://www.veristarnb.com/veristarnb/jsp/viewPublicPdfTypec.jsp?id=7wha7unlqvBV Mod. Ad.E 530 June 2017 This certificate consists of 3 page(s)

  • THE SCHEDULE OF APPROVAL

    1. PRODUCT DESCRIPTION:The CPS-01, CPS-01CA, CPS-01CA K1000, CPS-03, CPS-03CA, FPS-01CA, FPS-02CA, HTT-04 CA, HTT-06,HTT-06CA, TCS-01CA are Cylinder Pressure Transmitter intended to be installed on Gas and Diesel Engines andCompressors.

    Main Characteristics:Pressure Range: 0...300 bar, Other on demandSupply Voltage: 24VDC, 5VDC for CPS-01Output Signal: 4 - 20mA, 0.5 - 4.5VDC for CPS-01Electrical Connection: HTOE10-6P-F42-A34-SPL or M12Pressure Connection: M10; M14 for HTT-04CA, FPS-02CA, HTT-06 and HTT-06CABody Material: Stainless SteelIngress Protection Index: IP 65 for HTT-04CA; IP 67; IP69 for CPS-03, CPS-03CA, HTT-06 and HTT-06CA

    2. DOCUMENTS AND DRAWINGS:- Unreferenced Technical Documentation for IMES Sensors.- HTT-04 CA_en_01-2009; 600 703 Rev. 01; BIF-AVR V3.2/V3.3 dated 23.04.06; BIF-AVR-V3p3 dated 30.05.06.For B1 version:- CPS-01, CPS-01CA_en_04_2017, FPS-01CA_en_03_2018, FPS-02CA_en_12_2017, TCS-01CA_en_04_2018- BIF AVR V3pl rev. 3.1 dated 24.05.2006, BIF-AVR_K1000_V1.0 dated 13.07.2017, BIF-U V3.1 dated Sept. 2016- Functional Description and Sensor Type Comparison dated 2018-07-12For C1 version:- 905 527 - 01 dated 22.06.2020; CPS-03_en_07_2020; 905 492-01 dated 22.06.2020; CPS-03CA_en_07_2020- 905 488 - 00 dated 12.03.2020; HTT-06_en_09_2020; 905 537 - 00 dated 22.06.2020; HTT-06CA_en_09_2020- Comparison of sensor types: SP01_004 dated 23.06.2020

    3. TEST REPORTS:- IMES GmbH: 6002-09-0021-0 dated 26.01.09;- Bureau Veritas E&E Product Services GmbH: 09TH0043-BV-rules_1 dated 03 November 2009;- Emitel AG: U-328-3059-00 ME dated 2009-04-01For B1 version:- Intertek: 2235167KAU001 dated 2019-02-27; 2235473KAU001 dated 2019-03-06; 2232148KAU001 dated 2018-03-09- MTU: 01/18 dated 06.11.2018For C1 version:- Bureau Veritas Consumer Product Services: 20TH0284-IEC60068_0 dated 2020-04-08;20TUR0028_BV-rules_1 dated 17. Sept. 2020; 20TUR0029_BV-rules_1 dated 18. Sept. 2020- Intertek: 2239232KAU001 dated 2020-05-27

    4. APPLICATION / LIMITATION:4.1 - Bureau Veritas Rules and Regulations for the Classification of Steel Ships4.2 - Approval valid for ships intended to be granted with the following additional class notations: AUT-UMS, AUT-CCS,AUT-PORT and AUT-IMS.4.3 - Bureau Veritas Environmental Category, EC Code: 334.4 - The above products comply with requirements of IACS UR E10 Rev7.

    5. PRODUCTION SURVEY REQUIREMENTS:5.1 - The above mentioned products are to be supplied by IMES GmbH in compliance with the type described in thiscertificate.5.2 - This type of product is within the category HBV of Bureau Veritas Rule Note NR320 and as such does not require a BVproduct certificate.5.3 - IMES GmbH has to make the necessary arrangements to have its works recognized by Bureau Veritas in compliance withthe requirements of NR320 for HBV products:

    IMES GmbHDr.-Herbert-Kittel-Str. 2

    87600 KaufbeurenGERMANY

    Page 2 / 3

    Certificate number: 22266/C1 BV

    The electronic version is available at: http://www.veristarnb.com/veristarnb/jsp/viewPublicPdfTypec.jsp?id=7wha7unlqv

    BV Mod. Ad.E 530 June 2017 This certificate consists of 3 page(s)

  • 6. MARKING OF PRODUCT:- Maker's name or trademark- Equipment type or model identification- Date of manufacture and/or serial number

    7. OTHERS:7.1 - It is the responsibility of IMES GmbH to inform shipbuilders or their sub-contractors of the proper methods of fitting, useand general maintenance of the approved equipment and the conditions of this approval.7.2 - This certificate supersedes the Type Approval Certificate N° 22266/C0 BV issued on 10 Feb 2020 by the Society.

    *** END OF CERTIFICATE ***

    Page 3 / 3

    Certificate number: 22266/C1 BV

    The electronic version is available at: http://www.veristarnb.com/veristarnb/jsp/viewPublicPdfTypec.jsp?id=7wha7unlqv

    BV Mod. Ad.E 530 June 2017 This certificate consists of 3 page(s)