twistmate™ quick connectors

fastestinc.com Made in the USA

TwistMate™Quick ConnectorsTwist to Connect for Internal or External Threads and Fittings

LEAK TIGHT CONNECTIONS

z Ideally suited for high pressure testing applications up to 10,000 psi (689 bar)

z Finger-tight connection eliminates tape and sealants

z Pressure-assisted sealing eliminates wrenching and reduces operator fatigue

z Leak-tight seal prevents contamination of media and reduces scrap and test damage

z Quick connection reduces test setup time and maximizes production uptime

z Stainless steel design endures demanding production environments

MET Swivel MET CapMIT Swivel MIT Non-Swivel MIT Plug

1 FasTest, Inc. 1646 Terrace Drive Roseville, MN 55113 Phone: (800) 444-2373 Email: [email protected] fastestinc.com

TwistMate Series quick connection tools provide a simple, efficient seal to threaded ports and fittings to isolate your test part.

Simply turn the connector onto the fitting until the connection is finger tight – no wrenching or sealant is required. The TwistMate’s proprietary design utilizes pressure-assisted sealing technology to instantly create a leak-tight connection when air, gas or hydraulic pressure is introduced.

z Ideally suited for high pressure testing applications up to 10,000 psi (689 bar)

z Finger-tight connection eliminates tape and sealants

z Pressure-assisted sealing eliminates wrenching and reduces operator fatigue

z Leak-tight seal prevents contamination of media and reduces scrap and test damage

z Quick connection reduces test setup time and maximizes production uptime

z Stainless steel design endures demanding production environments

MIT - Internal Threads

MET - External Threads

z Water Dunk Leak Testing

z Leak, Flow, Flushing, or Washing

z Cylinders, Manifolds, Valves, Pumps, Filters, or Assemblies

z Bubble, Pressure Decay, and Mass Spectrometer Testing

z Heat Exchangers, Brake, and Steering System Assemblies

z Capping/Plugging Pipes, Fittings, or Hose Ends

Common Applications:

Housing Material Stainless steel

Seal Material Urethane, Neoprene or Buna N

Connection ProfilesMates with NPT, SAE O-Ring Boss, 37° and 45° Flare, Metric, BSPP and BSPT

Termination Profiles NPT, SAE 37° Flare

Operating Pressures Vacuum to 10,000 psi (689 bar)

Operating Temperature -40°F to 200°F (-40°C to 93°C)

2FasTest, Inc. 1646 Terrace Drive Roseville, MN 55113 Phone: (800) 444-2373 Email: [email protected] fastestinc.com

TwistMate Series | Threaded Connectors

MIT H - 04 2 04 1 X -Model

MET - Mechanical External Thread MIT - Mechanical Internal Thread

Optional Configurations

Blank = Standard C = For curved surfaces H = High pressure

Special Options

Blank = None PT = For thin walled pipe threads

Thread Type

1 = Female NPT 2 = Male NPT 3 = Female SAE, O-ring Boss 4 = Male SAE O-ring Boss 5 = Female BSPP 5T = Female BSPT 6 = Male BSPP 6T = Male BSPT 7 = Female metric 8 = Male metric 9 = Female SAE 37º flare 0 = Male SAE 37º flare A = Female SAE 45º flare

Connector Configuration

Blank = Swivel style X = Non-Swivel connector

Notes: Part Number Keys are to assist in IDENTIFICATION ONLY. Verify new part numbers with factory; some configurations are not possible.

Seal Material

Blank = Standard seal B = Buna-N E = EPDM N = Neoprene S = Silicone U = Urethane V = Viton

Thread NPT Size † BSPP/BSPT SAE Metric

02. . . . . . . . . . 1/8 - - - - 03. . . . . . . . . . . - - 3/8-24 - - 04. . . . . . . . . . 1/4 7/16-20 - - 05. . . . . . . . . . . - - 1/2-20 - - 06. . . . . . . . . . 3/8 9/16-18 or 5/8-18 - - 08. . . . . . . . . . 1/2 3/4-16 - - 10. . . . . . . . . . . - - 7/8-14 M10 x 1 12. . . . . . . . . . 3/4 1 1/16-12 M12 x 1 14. . . . . . . . . . . - - 1 3/16-12 M14 x 1 16. . . . . . . . . . . 1 1 5/16-12 M16 x 1 18. . . . . . . . . . . - - - - M18 x 1.5 20. . . . . . . . . .1-1/4 1 5/8-12 M20 x 1.5 22. . . . . . . . . . . - - - - M22 x 1.5 24. . . . . . . . . .1-1/2 1 7/8-12 - - 32. . . . . . . . . . . 2 - - - - 40. . . . . . . . . .2-1/2 - - - - 48. . . . . . . . . . . 3 - - - - 64. . . . . . . . . . . 4 - - - - † The first two numbers (04) represent connection thread size. The 4th and 5th num-bers (04) represent the termination thread size. The fourth/fifth numbers may also be (P) or (C) for a plug or cap connector.P = Plug, no termination port

C = Cap, no termination port

NPT: Per SAE J476a, ANSI B1.20

SAE O-Ring Boss (ORB): Per SAE J1926, ISO 11926

SAE JIC 37° Flare: Per SAE J514, ISO 12151-5

O-Ring Face Seal (ORFS): Per SAE J1453, ISO 8434-3

SAE 45° Flare: Per SAE J512 or J513

BSPP (aka G): Per ISO 228, BS 2779, DIN 3852 Part 2 Type A and B

BSPT: Per ISO 7, BS 21, DIN 3852 Part 2 Type C

Metric (aka M): Per SAE J2244, ISO 6149, DIN 3852 Part 1

*Consult factory for custom options

Thread Standards:

Swivel Style Repair Kits 2 internal O-rings, 2 backup rings and 1 snap ring.

Non-Swivel Style Repair Kits 1 internal O-ring and 1 backup ring.

Repair kits do not include main seal replacement.

For additional kits consult factory.

Repair Kits:

FasTest Genuine Parts

All main seal packages contain 5 main seals.Seal Sets:

Don’t see a solution for your application? Submit a custom application form and drawing to [email protected] or to your local distributor.


Table of Contents

TwistMate Series Overview.......................................................................................................................1

TwistMate Part Number Builder................................................................................................................2

How to Order..............................................................................................................................................4

Internal Connections

NPT Threads...............................................................................................................................5-6

SAE O-Ring Boss Threads.............................................................................................................7

SAE 37º Flare Threads..................................................................................................................8

SAE O-Ring Face Seal Threads.....................................................................................................9

BSPP Threads..............................................................................................................................10

BSPT Threads..............................................................................................................................11

ISO O-Ring Metric Threads..........................................................................................................12

External Connections

NPT Threads...........................................................................................................................13-14

SAE 37º & 45º Threads...............................................................................................................15

BSPP Threads..............................................................................................................................16

BSPT Threads..............................................................................................................................17

Fastest Connector Maintenance ............................................................................................................18


Find Local Distributor

Visit:

www.fastestinc.com/en/distributorlocator

Request Quote

Visit:

www.fastestinc.com/en/applicationevaluation

Order Online

Visit:

fastestinc.com

How to Order


Part Number Dim A Dim B Dim C Dim D(female)

Rated PSI (bar)

Housing Style

Seal Material Repair Kit Main Seals

Package (5)

MIT-022021 1/8” NPT 0.82 (20.8) 1.68 (42.7) 1/8” NPT 5000 (345)

Swivel Urethane*

MITR-020 S1109-U70

MIT-042041 1/4” NPT 1.00 (25.4) 1.88 (42.8) 1/4” NPT MITR-040 S1111-U70

MIT-062061 3/8” NPT 1.18 (30.0) 2.09 (53.1) 3/8” NPT

4000 (276)

MITR-060 S1113-U70



MIT-162161 1” NPT 2.00 (50.8) 3.27 (83.1) 1” NPT MITR-160 S1216-U70

MIT-202201 1 ¼” NPT 2.38 (60.5) 3.29 (83.6) 1 ¼” NPT MITR-200 S1222-U70

MIT-242241 1 ½” NPT 3.73 (94.7) 3.73 (94.7) 1 ½” NPT 3000 (200) MITR-240 S1327-U70

NPT – Swivel Style (per SAE J476 or ANSI B1.20)


Rated PSI (bar)

Housing Style


Package (5)

MIT-022021X 1/8” NPT 0.82 (20.8) 1.24 (31.5) 1/8” NPT 5000 (345)

Non-Swivel Urethane*

MITR-02 S1109-U70

MIT-042041X 1/4” NPT 1.00 (25.4) 1.41 (35.8) 1/4” NPT MITR-04 S1111-U70

MIT-062061X 3/8” NPT 1.18 (30.0) 1.48 (37.6) 3/8” NPT

4000 (276)

MITR-06 S1113-U70



MIT-162161X 1” NPT 2.00 (50.8) 2.07 (52.6) 1” NPT MITR-16 S1216-U70

MIT-202201X 1-1/4” NPT 2.38 (60.5) 2.13 (54.1) 1-1/4” NPT MITR-20 S1222-U70

MIT-242241X 1-1/2” NPT 2.74 (69.6) 2.40 (61.0) 1-1/2” NPT 3000 (207) MITR-24 S1327-U70

MIT-322161X 2” NPT 3.47 (88.1) 2.68 (68.1) 1” NPT 2500 (172) MITR-32 S1331-U70

MIT-402161X 2-1/2” NPT 3.97 (100.8) 3.42 (88.9) 1” NPT 1500 (103)

MITR-40 S1335-U70

MIT-482161X 3” NPT 4.73 (120.1) 3.68 (93.5) 1” NPT MITR-48 S1340-U70

MIT-642161X 4” NPT 5.73 (145.5) 3.68 (93.5) 1” NPT 1000 (69) MITR-64 S1348-U70

NPT – Non-Swivel Style (per SAE J476 or ANSI B1.20)

Dimensions are in inches (mm). *Optional seal materials are FKM (Viton), EPDM and Buna N - Example: MIT-022021XV = FKM (Viton)

Internal Connections | NPT Threads

Swivel Style Non-Swivel Style Plug StyleConnect to:



Rated PSI (bar)

Housing Style


Package (5)

MITH-022021X 1/8” NPT 0.82 (20.8) 1.24 (31.5) 1/8” NPT10,000 (689)


MITR-02 S1109-U70

MITH-042041X 1/4” NPT 1.00 (25.4) 1.41 (35.8) 1/4” NPT MITR-04 S1111-U70

MITH-062061X 3/8” NPT 1.18 (30.0) 1.48 (37.6) 3/8” NPT MITR-06 S1113-U70

MITH-082081X 1/2” NPT 1.36 (34.5) 1.85 (47.0) 1/2” NPT 8000 (552) MITR-08 S1209-U70

MITH-122121X 3/4” NPT 1.68 (42.7) 1.94 (49.3) 3/4” NPT 7500 (517) MITR-12 S1213-U70

MITH-162161X 1” NPT 2.00 (50.8) 2.07 (52.6) 1” NPT 6500 (448) MITR-16 S1216-U70

NPT – Non-Swivel Style for High Pressure (per SAE J476 or ANSI B1.20)

Internal Connections | NPT Threads


Rated PSI (bar)

Housing Style


Package (5)

MITC-022021X 1/8” NPT 0.82 (20.8) 1.24 (31.5) 1/8” NPT 5000 (345)


MITR-02 S1010-U70

MITC-042041X 1/4” NPT 1.00 (25.4) 1.41 (35.8) 1/4” NPT MITR-04 S1013-U70

NPT – Non-Swivel Style for Curved Surfaces (per SAE J476 or ANSI B1.20)

Part Number Max. at Dim A

Bore Ø. Dim B

Chamfer Ø Dim C

Min. Body Ø Dim D

MITC-022021X 0.030” 0.500” 0.440” 0.880”

MITC-042041X 0.045” 0.625” 0.570” 1.200”

The TwistMate MITC Series connectors are designed to seal the port on the round of a surface better and with less effort. The unique chamfer seal design provides positive sealing with no thread sealants or wrench tightening.

Part Number Dim A Dim B Dim C Rated PSI (bar)

Housing Style


Package (5)

MIT-022P 1/8” NPT 0.82 (21.8) 1.24 (31.5) 5000 (345)

Plug Urethane*

MITR-02 S1109-U70

MIT-042P 1/4” NPT 1.00 (25.4) 1.41 (35.8) MITR-04 S1111-U70

MIT-062P 3/8” NPT 1.18 (30.0) 1.48 (37.6)

4000 (276)

MITR-06 S1113-U70

MIT-082P 1/2” NPT 1.36 (34.5) 1.85 (47.0) MITR-08 S1209-U70

MIT-122P 3/4” NPT 1.68 (42.7) 1.94 (49.3) MITR-12 S1213-U70

MIT162P 1” NPT 2.00 (50.8) 2.07 (52.6) MITR-16 S1216-U70

MIT-202P 1 ¼” NPT 2.38 (60.5) 2.13 (54.1) MITR-20 S1222-U70

MIT-242P 1 ½” NPT 2.74 (69.6) 2.40 (61.0) 3000 (207) MITR-24 S1327-U70

MIT-322P 2” NPT 3.47 (88.1) 2.68 (68.1) 2500 (172) MITR-32 S1331-U70

MIT-402P 2 ½” NPT 3.97 (100.8) 3.42 (88.9) 1500 (103)

MITR-40 S1335-U70

MIT-482P 3” NPT 4.73 (120.1) 3.68 (93.5) MITR-48 S1340-U70

MIT-642P 4” NPT 5.73 (145.5) 3.68 (93.5) 1000 (69) MITR-64 S1348-U70

NPT – Plug Style (per SAE J476 or ANSI B1.20)

Dimensions are in inches (mm). *Optional seal materials are FKM (Viton), EPDM and Buna N - Example: MIT-042PV = FKM (Viton)



Rated PSI (bar)

Housing Style

Seal Material

Repair Kit

Main Seals Package (5)

MIT-034021X -3 (3/8-24) 0.82 (21.8) 1.29 (32.8) 1/8” NPT

5000 (345)


MITR-02 S1109-U70MIT-044021X -4 (7/16-20) 0.82 (21.8) 1.29 (32.8) 1/8” NPT

MIT-054041X -5 (1/2-20) 1.00 (25.4) 1.41 (35.8) 1/4” NPTMITR-04 S1111-U70

MIT-064041X -6 (9/16-18) 1.00 (25.4) 1.41 (35.8) 1/4” NPT

MIT-084081X -8 (3/4-16) 1.36 (34.5) 1.85 (47.0) 1/2” NPT

4000 (276)

MITR-08 S1209-U70MIT-104081X -10 (7/8-14) 1.36 (34.5) 1.85 (47.0) 1/2” NPT

MIT-124121X -12 (1 1/16-12) 1.68 (42.7) 1.94 (49.3) 3/4” NPT MITR-12 S1213-U70

MIT-144161X -14 (1 3/16-12) 2.00 (50.8) 2.13 (54.1) 1” NPT MITR-16 S1216-U70

MIT-164161X -16 (1 5/16-12) 2.00 (50.8) 2.13 (54.1) 1” NPT MITR-16 S1217-U70

MIT-204201X -20 (1 5/8-12) 2.38 (60.5) 2.13 (54.1) 1-1/4” NPT MITR-20 S1222-U70

SAE ORB – Non-Swivel Style (per SAE J1926 or ISO 11926)


Rated PSI (bar)

Housing Style

Seal Material

Repair Kit


MITH-044021X -4 (7/16-20) 0.82 (21.8) 1.29 (32.8) 1/8” NPT 10,000 (689)


MITR-02 S1109-U70

MITH-064041X -6 (9/16-18) 1.00 (25.4) 1.41 (35.8) 1/4” NPT MITR-04 S1111-U70

MITH-084081X -8 (3/4-16) 1.36 (34.5) 1.85 (47.0) 1/2” NPT 8000 (552)MITR-08 S1209-U70

MITH-104081X -10 (7/8-14) 1.36 (34.5) 1.85 (47.0) 1/2” NPT 7500 (517)MITH-124121X -12 (1 1/16-12) 1.68 (42.7) 1.94 (49.3) 3/4” NPT MITR-12 S1213-U70

MITH-144161X -14 (1 3/16-12) 2.00 (50.8) 2.13 (54.1) 1” NPT 7000 (483)

MITR-16 S1216-U70

MITH-164161X -16 (1 5/16-12) 2.00 (50.8) 2.13 (54.1) 1” NPT MITR-16 S1217-U70


Housing Style

Seal Material

Repair Kit


MIT-044P -4 (7/16-20) 0.82 (21.8) 1.29 (32.8)5000 (345)

Plug Urethane*

MITR-02 S1109-U70

MIT-054P -5 (1/2-20) 1.00 (25.4) 1.41 (35.8) MITR-04 S1111-U70

MIT-064P -6 (9/16-18) 1.00 (25.4) 1.41 (35.8) MITR-04 S1111-U70

MIT-084P -8 (3/4-16) 1.36 (34.5) 1.85 (47.0)

4000 (276)

MITR-08 S1209-U70

MIT-104P -10 (7/8-14) 1.68 (42.7) 1.94 (49.3) MITR-08 S1209-U70

MIT-124P -12 (1 1/16-20) .82 (21.8) 1.29 (32.8) MITR-12 S1213-U70

MIT-144P -14 (1 3/16-12) 2.00 (50.8) 2.13 (54.1) MITR-16 S1216-U70

MIT-164P -16 (1 5/16-12) 2.00 (50.8) 2.13 (54.1) MITR-16 S1217-U70

MIT-204P -20 (1 5/8-12) 2.38 (60.5) 2.13 (54.1) MITR-20 S1222-U70

SAE ORB – Non-Swivel Style for High Pressure (per SAE J1926 or ISO 11926)

SAE ORB – Plug Style (per SAE J1926 or ISO 11926)

Dimensions are in inches (mm). *Optional seal materials is EPDM - Example: MITH-064041XE = EPDM

Internal Connections | SAE O-Ring Boss Threads

Connect to: Non-Swivel Style Plug Style


Part Number Dim A Dim B Dim C Dim D(male)

Rated PSI (bar)

Housing Style


Package (5)

MITH-040022 -4 (7/16-20) 0.80 (20.3) 2.11 (53.6) 1/8” NPT 10,000 (689)

Swivel Buna N*

METR-02 S2054-0158B70

MITH-060042 -6 (9/16-18) 0.97 (24.6) 2.36 (59.9) 1/4” NPT METR-04 S2064-0239B70

MITH-080062 -8 (3/4-16) 1.18 (30.0) 2.54 (64.5) 3/8” NPT 8000 (552) METR-06 S1012-B70

MITH-100082 -10 (7/8-14) 1.38 (35.1) 2.94 (76.7) 1/2” NPT 7500 (517)

METR-08 S1013-B70

MITH-120122 -12 (1 1/16-12) 1.72 (43.7) 3.30 (83.8) 3/4” NPT METR-12 S2070-0583B70

MITH-160162 -16 (1 5/16-12) 2.13 (54.1) 3.77 (95.8) 1” NPT 7000 (483) METR-16 S2080-0796B70

SAE 37° Flare – Swivel Style (per SAE J514)

Internal Connections | SAE 37° Flare Threads

Dimensions are in inches (mm). *Optional seal materials are FKM (Viton), EPDM and Urethane – Example: MITH-080062V = FKM (Viton)

Part Number Dim A Dim B Dim C Rated PSI

(bar)Housing

StyleSeal

Material Repair Kit Main Seals Package (5)

MITH-040P -4 (7/16-20) 0.80 (20.3) 1.42 (36.1) 10,000 (689)

Plug Buna N*

METR-02 S2054-0158B70

MITH-060P -6 (9/16-18) 0.97 (24.6) 1.51 (38.4) METR-04 S2064-0239B70

MITH-080P -8 (3/4-16) 1.18 (30.0) 1.65 (41.9) 8000 (552) METR-06 S1012-B70

MITH-100P -10 (7/8-14) 1.38 (35.1) 1.86 (47.2) 7500 (517)

METR-08 S1013-B70

MITH-120P -12 (1 1/16-12) 1.72 (43.7) 2.03 (51.6) METR-12 S2070-0583B70

MITH-160P -16 (1 5/16-12) 2.13 (54.1) 2.29 (58.2) 7000 (483) METR-16 S2080-0796B70

SAE 37° Flare – Plug Style (per SAE J514)

Connect to: Flare Swivel Style Plug Style



Rated PSI (bar)

Housing Style


Package (5)

MITH-04K042 -4 (9/16-18) 0.80 (20.3) 2.11 (53.6) 1/8” NPT 10,000 (689)

Swivel Buna N*

METR-04 S1008-B70

MITH-06K062 -6 (11/16-16) 0.97 (24.6) 2.36 (59.9) 1/4” NPT METR-06 S2070-0291B70

MITH-08K082 -8 (13/16-16) 1.18 (30.0) 2.54 (64.5) 3/8” NPT 8000 (552) METR-08 S1012-B70

MITH-10K122 -10 (1-14) 1.38 (35.1) 2.94 (76.7) 1/2” NPT 7500 (517) METR-12

S1014-B70

MITH-12K122 -12 (1 3/16-12) 1.72 (43.7) 3.30 (83.8) 3/4” NPT S1113-B70

MITH-16K162 -16 (1 7/16-12) 2.13 (54.1) 3.77 (95.8) 1” NPT 7000 (483) METR-16 S1117-B70

SAE ORFS – Swivel Style (per SAE J1453)


Housing Style


Package (5)

MITH-04KP -4 (7/16-20) 0.80 (20.3) 1.42 (36.1) 10,000 (689)

Plug Buna N*

METR-04 S1008-B70

MITH-06KP -6 (9/16-18) 0.97 (24.6) 1.51 (38.4) METR-06 S2070-0291B70

MITH-08KP -8 (3/4-16) 1.18 (30.0) 1.65 (41.9) 8000 (552) METR-08 S1012-B70

MITH-10KP -10 (7/8-14) 1.38 (35.1) 1.86 (47.2) 7500 (517) METR-12

S1014-B70

MITH-12KP -12 (1 1/16-12) 1.72 (43.7) 2.03 (51.6) S1113-B70

MITH-16KP -16 (1 5/16-12) 2.13 (54.1) 2.29 (58.2) 7000 (483) METR-16 S1117-B70

SAE ORFS – Plug Style (per SAE J1453)

Dimensions are in inches (mm). *Optional seal materials are FKM (Viton), EPDM and Buna N – Example: MITH-10KPE = EPDM

Internal Connections | SAE O-Ring Face Seal Threads

Connect to: Swivel Style Plug Style



Rated PSI (bar)

Housing Style


Package (5)

MIT-026021 1/8” BSPP 0.82 (20.8) 1.24 (31.5) 1/8” NPT 5000 (345)

Swivel Urethane*

MITR-020 S1109-U70

MIT-046041 1/4” BSPP 1.00 (25.4) 1.41 (35.8) 1/4” NPT MITR-040 S1111-U70

MIT-066061 3/8” BSPP 1.18 (30.0) 1.48 (37.6) 3/8” NPT 4000 (276)

MITR-060 S1113-U70

MIT-086081 1/2” BSPP 1.36 (34.5) 1.85 (47.0) 1/2” NPT MITR-080 S1209-U70

BSPP – Swivel Style (per ISO 228 or BS 2779)

Dimensions are in inches (mm).

Internal Connections | BSPP Threads


Rated PSI (bar)

Housing Style


Package (5)

MIT-026021X 1/8” BSPP 0.82 (21.8) 1.20 (30.5) 1/8” NPT 5000 (345)

Non- Swivel Urethane*

MITR-02 S1109-U70

MIT-046041X 1/4” BSPP 1.00 (25.4) 1.36 (34.5) 1/4” NPT MITR-04 S1111-U70

MIT-066061X 3/8” BSPP 1.18 (30.0) 1.50 (38.1) 3/8” NPT

4000 (276)

MITR-06 S1113-U70



MIT-166161X 1” BSPP 2.00 (50.8) 2.07 (52.6) 1” NPT MITR-16 S1216-U70

BSPP – Non-Swivel Style (per ISO 228 or BS 2779)


Housing Style


Package (5)

MIT-026P 1/8” BSPP 0.82 (21.8) 1.24 (31.5) 5000 (345)

Plug Urethane*

MITR-02 S1109-U70

MIT-046P 1/4” BSPP 1.00 (25.4) 1.41 (35.8) MITR-04 S1111-U70

MIT-066P 3/8” BSPP 1.18 (30.0) 1.48 (37.6)

4000 (276)

MITR-06 S1113-U70

MIT-086P 1/2” BSPP 1.36 (34.5) 1.85 (47.0) MITR-08 S1209-U70

MIT-126P 3/4” BSPP 1.68 (42.7) 1.90 (48.3) MITR-12 S1213-U70

MIT-166P 1” BSPP 2.00 (50.8) 2.36 (59.9) MITR-16 S1216-U70

BSPP – Plug Style (per ISO 228 or BS 2779)

Dimensions are in inches (mm). *Optional seal materials are FKM (Viton), EPDM and Buna N - Example: MIT-046PE = EPDM

Connect to: Swivel Style Non-Swivel Style Plug Style


BSPT – Non-Swivel Style (per ISO 7 or BS 21)


Rated PSI (bar)

Housing Style


Package (5)

MIT-026T021X 1/8” BSPT 0.82 (21.8) 1.20 (30.5) 1/8” NPT

4000 (276)


MITR-02 S1109-U70

MIT-046T041X 1/4” BSPT 1.00 (25.4) 1.41 (34.5) 1/4” NPT MITR-04 S1111-U70




MIT-166T161X 1” BSPT 2.00 (50.8) 2.07 (52.6) 1” NPT MITR-16 S1216-U70

Dimensions are in inches (mm). *Optional seal materials are FKM (Viton), EPDM and Buna N – Example: MIT-046TPB = Buna N

BSPT – Plug Style (per ISO 7 or BS 21)


Housing Style


Package (5)

MIT-026TP 1/8” BSPT 0.82 (21.8) 1.24 (31.5) 5000 (345)

Plug Urethane*

MITR-02 S1109-U70

MIT-046TP 1/4” BSPT 1.00 (25.4) 1.41 (35.8) MITR-04 S1111-U70

MIT-066TP 3/8” BSPT 1.18 (30.0) 1.48 (37.6)

4000 (276)

MITR-06 S1113-U70



MIT-166TP 1” BSPT 2.00 (50.8) 2.07 (52.6) MITR-16 S1216-U70

MIT-246TP 1 ½” BSPT 2.74 (69.6) 2.40 (61.0) 3000 (207) MITR-24 S1327-U70

MIT-326TP 2” BSPT 3.47 (88.1) 2.68 (68.1) 2500 (172) MITR-32 S1331-U70


Rated PSI (bar)

Housing Style


Package (5)

MIT-026T021 1/8” BSPT 0.82 (21.8) 1.24 (31.5) 1/8” NPT 5000 (345)

Swivel Urethane*

MITR-020 S1109-U70

MIT-046T041 1/4” BSPT 1.00 (25.4) 1.41 (35.8) 1/4” NPT MITR-040 S1111-U70

MIT-066T061 3/8” BSPT 1.18 (30.0) 1.48 (37.6) 3/8” NPT 4000 (276)

MITR-060 S1113-U70

MIT-086T081 1/2” BSPT 1.36 (34.5) 1.85 (47.0) 1/2” NPT MITR-080 S1209-U70

BSPT – Swivel Style (per ISO 7 or BS 21)

Internal Connections | BSPT Threads



Internal Connections | ISO O-Ring Metric Threads


Rated PSI (bar)

Housing Style


Package (5)

MIT-108021 M10 x 1.0 0.82 (21.8) 1.30 (33.0) 1/8” NPT

4000 (276) Swivel

Buna N* MITR-020 S1109-B70

MIT-128021 M12 x 1.5 1.00 (25.4) 1.42 (36.1) 1/8” NPT

Urethane*

MITR-040 S1110-U70

MIT-148041 M14 x 1.5 1.00 (25.4) 1.42 (36.1) 1/4” NPT MITR-040 S1111-U70

MIT-168061 M16 x 1.5 1.18 (30.0) 1.56 (39.6) 3/8” NPT MITR-060 S1113-U70

MIT-188061 M18 x 1.5 1.18 (30.0) 1.56 (39.6) 3/8” NPT MITR-060 S1114-U70

MIT-208021 M22 x 1.5 1.36 (34.5) 1.87 (47.5) 1/8” NPT MITR-080 S1209-U70


Rated PSI (bar)

Housing Style


Package (5)

MIT-108021X M10 x 1.0 0.82 (21.8) 1.30 (33.0) 1/8” NPT5000 (345)


MITR-02 S1109-U70

MIT-128041X M12 x 1.5 1.00 (25.4) 1.42 (36.1) 1/4” NPT MITR-04 S1110-U70


MIT-168061X M16 x 1.5 1.18 (30.0) 1.56 (39.6) 3/8” NPT4000(276)

MITR-06 S1113-U70




Housing Style


Package (5)

MIT-108P M10 x 1.0 0.82 (21.8) 1.30 (33.0)5000(345)

Plug Urethane*

MITR-02 S1109-U70

MIT-128P M12 x 1.5 1.00 (25.4) 1.42 (36.1) MITR-04 S1110-U70

MIT-148P M14 x 1.5 1.00 (25.4) 1.42 (36.1) MITR-04 S1111-U70

MIT-168P M16 x 1.5 1.18 (30.0) 1.56 (39.6)4000(276)

MITR-06 S1113-U70

MIT-188P M18 x 1.5 1.18 (30.0) 1.56 (39.6) Consult Factory S1114-U70

MIT-228P M22 x 1.5 1.36 (34.5) 1.87 (47.5) MITR-08 S1116-U70

ISO O-Ring Metric – Swivel Style (per ISO 6149 or SAE J2244)

ISO O-Ring Metric – Non-Swivel Style (per ISO 6149 or SAE J2244)

ISO O-Ring Metric – Plug Style (per ISO 6149 or SAE J2244)

Dimensions are in inches (mm). *Optional seal materials are FKM (Viton), EPDM and Buna N - Example: MIT-148041XV = FKM (Viton)




Rated PSI (bar)

Housing Style


Package (5)

MET-021022 1/8” NPT 0.82 (21.8) 1.51 (38.4) 1/8” NPT 5000 (345)

Swivel Urethane*

METR-02 S1105-U70

MET-041042 1/4” NPT 0.94 (23.9) 1.74 (44.2) 1/4” NPT METR-04 S1108-U70

MET-061062 3/8” NPT 1.18 (30.0) 1.78 (45.2) 3/8” NPT

4000(276)

METR-06 S1110-U70



MET-161162 1” NPT 2.00 (50.8) 2.74 (69.6) 1” NPT METR-16 S1212-U70

MET-201202 1-1/4” NPT 2.37 (60.2) 3.27 (83.1) 1-1/4” NPT 2500 (172) METR-20 S1217-U70

NPT – Swivel Style (per ISO J476 or ANSI B1.20)


Rated PSI (bar)

Housing Style


Package (5)

MET-241161 1-1/2” NPT 2.37 (60.2) 3.27 (83.1)

1” NPT

1000 (67)

Swivel Urethane*

METR-24 METB-24

MET-321161 2” NPT 3.00 (76.2) 2.53 (64.3) 750 (52) METR-32 METB-32

MET-401161 2-1/2” NPT 3.40 (86.4) 2.54 (64.5) 500 (34)

METR-40 METB-40

MET-481161 3” NPT 4.25 (108.0) 2.61 (66.3) METR-48 METB-48

NPT – Swivel Style (per ISO J476 or ANSI B1.20)


Rated PSI (bar)

Housing Style


Package (5)

METH-021022 1/8” NPT 0.82 (21.8) 1.51 (38.4) 1/8” NPT 10,000 (689)

Swivel Urethane*

METR-02 S1105-U70

METH-041042 1/4” NPT 0.94 (23.9) 1.74 (44.2) 1/4” NPT 8000 (552)

METR-04 S1108-U70

METH-061062 3/8” NPT 1.18 (30.0) 1.78 (45.2) 3/8” NPT METR-06 S1110-U70

METH-081082 1/2” NPT 1.60 (40.6) 2.05 (52.1) 1/2” NPT 6000 (414) METR-08 S1112-U70

METH-121122 3/4” NPT 1.68 (42.7) 2.34 (59.4) 3/4” NPT 5500 (379) METR-12 S1115-U70

METH-161162 1” NPT 2.00 (50.8) 2.74 (69.6) 1” NPT 5000 (345) METR-16 S1212-U70

NPT – Swivel Style for High Pressure (per SAE J476 or ANSI B1.20)

Dimensions are in inches (mm). *Optional seal materials are FKM (Viton), EPDM and Urethane – Example: METH-121122V = FKM (Viton)

External Connections | NPT Threads

Connect to: Swivel Style Cap Style


External Connections | NPT Threads


Rated PSI (bar)

Housing Style


Package (5)

MET-041042-PT 1/4” NPT 0.94 (23.9) 1.74 (44.2) 1/4” NPT

750 (52)

Swivel

Buna N*

METR-04 METB-04PT

MET-061062-PT 3/8” NPT 1.18 (30.0) 1.78 (45.2) 3/8” NPT METR-06 METB-06PT



MET-161162-PT 1” NPT 2.00 (50.8) 2.74 (69.6) 1” NPT METR-16 METB-16PT

MET-201202-PT 1-1/4” NPT 2.37 (60.2) 3.27 (80.1) 1-1/4” NPT METR-20 METB-20PT

MET-241161* 1-1/2” NPT 2.37 (60.2) 3.27 (80.1)

1” NPT Urethane*

METR-24 METB-24

MET-321161* 2” NPT 3.00 (76.2) 2.53 (64.3) METR-32 METB-32

MET-401161* 2-1/2” NPT 3.40 (86.4) 2.54 (64.5) 500 (35)

METR-40 METB-40

MET-481161* 3” NPT 4.25 (108.0) 2.61 (66.3) METR-48 METB-48

NPT – Swivel Style for Thin Walled Threaded Pipe (per SAE J476 or ANSI B1.20)


Housing Style


Package (5)

MET-021C 1/8” NPT 0.80 (20.3) 0.83 (21.1) 5000 (345)

Cap Urethane*

METR-02 S1105-U70

MET-041C 1/4” NPT 0.93 (23.6) 0.88 (22.4) METR-04 S1108-U70

MET-061C 3/8” NPT 1.20 (30.5) 0.90 (22.9)

4000 (276)

METR-06 S1110-U70

MET-081C 1/2” NPT 1.36 (34.5) 0.97 (24.6) METR-08 S1112-U70

MET-121C 3/4” NPT 1.68 (42.7) 1.08 (27.4) METR-12 S1115-U70

MET-161C 1” NPT 1.99 (50.5) 1.26 (32.0) METR-16 S1212-U70

NPT – Cap Style (per SAE J476 or ANSI B1.20)

Dimensions are in inches (mm). *Optional seal materials are FKM (Viton), EPDM and Buna N - Example: MET-041CV = FKM (Viton)

*Connector pressure rating reduced to 750psi & 500psi respectively for thin wall threaded pipe applications.



Rated PSI (bar)

Housing Style


Package (5)

MET-069040 -6 (9/16-18) 1.20 (30.5) 1.20 (30.5) -4 (7/16-20) 5000 (344)

Swivel Buna N*

METR-06 S1012-B70

MET-089060 -8 (3/4-16) 1.38 (35.1) 1.38 (35.1) -6 (9/16-18)4000(276)

METR-08 S1015-B70

MET-109080 -10 (7/8-14) 1.51 (38.4) 1.51 (38.4) -8 (3/4-16) METR-08 S1016-B70

MET-129100 -12 (1 1/16-12) 1.70 (43.2) 1.70 (43.2) -10 (7/8-14) METR-12 S1018-B70

MET-169120 -16 (1 5/16-12) 1.99 (50.6) 1.99 (50.6) -12 (1 1/16-12)1000 (69)

METR-16 S1120-B70

MET-209160 -20 (1 5/8-12) 2.37 (60.2) 2.37 (60.2) -16 (1 5/16-12) METR-20 S1124-B70

MET-249200 -24 (1 7/8-12) 2.50 (63.5) 2.50 (63.5) -20 (1 5/8-12) METR-24 S1129-B70

MET329240 -32 (2 ½-12) 3.25 (82.6) 3.25 (82.6) -24 (1 7/8-12) 750 (52) METR-32AN S1227-B70


Rated PSI (bar)

Housing Style


Package (5)

METH-049040 -4 (7/16-20) 0.95 (24.1) 1.76 (44.7) -4 (7/16-20)

10,000 (689)

Swivel Buna N*

METR-049 S2070-0270B70

METH-069060 -6 (9/16-18) 1.20 (30.5) 1.83 (46.5) -6 (9/16-18) METR-06 S1012-B70

METH-089080 -8 (3/4-16) 1.38 (35.1) 2.00 (50.8) -8 (3/4-16) METR-08 S1015-B70

METH-109100 -10 (7/8-14) 1.51 (38.4) 2.35 (59.7) -10 (7/8-14) METR-12 S1016-B70

METH-129120 -12 (1 1/16-12) 1.70 (43.2) 2.52 (64.0) -12 (1 1/16-12) 6500 (433) METR-16 S1120-B70

METH-169160 -16 (1 5/16-12) 1.99 (50.6) 2.74 (69.6) -16 (1 5/16-12) 1500 (100) METR-24 S1129-B70

SAE 37° Flare – Swivel Style (per SAE J514 or ISO 12151-5)

SAE 37° Flare – Swivel Style for Swivel Style for High Pressure (per SAE J514 or ISO 12151-5)


Rated PSI (bar)

Housing Style


Package (5)

MET-04A042B -4 (7/16-20) 0.95 (24.1) 1.76 (44.7) 1/4” NPT 5000 (345)

Swivel

Buna N* METR-049 S2060-0246B70

MET-06A062N -6 (5/8-18) 1.20 (30.5) 1.83 (46.5) 3/8” NPT

Neoprene*

METR-06 S1012-N70

MET-08A082N -8 (3/4-16) 1.38 (35.1) 2.00 (50.8)1/2” NPT 4000

(276)METR-08

S1014-N70

MET-10A082N -10 (7/8-14) 1.51 (38.4) 2.35 (59.7) S1015-N70

MET-12A122N -12 (1 16-14) 1.70 (43.2) 2.52 (64.0) 3/4” NPT METR-12 S1117-N70

SAE 45° Flare – Swivel Style (per SAE J512 or J513)

Dimensions are in inches (mm). *Optional seal materials are FKM (Viton), EPDM and Buna N - Example: MET-08A082NE = EPDM

External Connections | SAE 37° & 45° Flare Threads

Connect to: 37° Flare Swivel Style 45° Flare Swivel Style


Part Number Dim A Dim B Dim C Dim D Rated PSI (bar)

Housing Style

Seal Material

Repair Kit


MET-025022 1/8” BSPP 0.80 (20.3) 1.62 (41.1) 1/8” NPT 5000(345)

Swivel Urethane*

METR-02 S1105-U70

MET-045042 1/4” BSPP 0.93 (23.6) 1.63 (41.4) 1/4” NPT METR-04 S1108-U70

MET-065062 3/8” BSPP 1.20 (30.5) 1.31 (33.3) 3/8” NPT

4000(276)

METR-06 S1110-U70



MET-165162 1” BSPP 1.99 (50.6) 2.74 (69.6) 1”NPT METR-16 S1212-U70

BSPP - Swivel Style (per ISO 228 or BS 2779)

External Connections | BSPP Threads


Housing Style


Package (5)

MET-025C 1/8” BSPP 0.80 (20.3) 0.83 (21.1) 5000(345)

Cap Urethane*

METR-02 S1105-U70

MET-045C 1/4” BSPP 0.93 (23.6) 0.88 (22.4) METR-04 S1108-U70

MET-065C 3/8” BSPP 1.20 (30.5) 0.90 (22.9) 4000(276)

METR-06 S1110-U70

MET-085C 1/2” BSPP 1.36 (34.5) 0.97 (24.6) METR-08 S1112-U70

BSPP – Cap Style (per ISO 228 or BS 2779)

Dimensions are in inches (mm). *Optional seal materials are FKM (Viton), EPDM and Buna N - Example: MET-045CE = EPDM

Connect to: Swivel Style Cap Style


External Connections | BSPT Threads


Rated PSI (bar)

Housing Style


Package (5)

MET-025T022 1/8” BSPT 0.80 (20.3) 1.62 (41.1) 1/8” NPT 5000 (345)

Swivel Urethane*

METR-02 S1105-U70

MET-045T042 1/4” BSPT 0.93 (23.6) 1.63 (41.4) 1/4” NPT METR-04 S1108-U70

MET-065T062 3/8” BSPT 1.20 (30.5) 1.31 (33.3) 3/8” NPT

4000 (276)

METR-06 S1110-U70



MET-165T162 1” BSPT 1.99 (50.6) 2.74 (69.6) 1” NPT METR-16 S1212-U70

BSPT - Swivel Style (per ISO 228 or BS 2779)


Housing Style


Package (5)

MET-025TC 1/8” BSPT 0.80 (20.3) 0.83 (21.1) 5000 (345)

Cap Urethane*

METR-02 S1105-U70

MET-045TC 1/4” BSPT 0.93 (23.6) 0.88 (22.4) METR-04 S1108-U70

MET-065TC 3/8” BSPT 1.20 (30.5) 0.90 (22.9) 4000 (276)

METR-06 S1110-U70

MET-085TC 1/2” BSPT 1.36 (34.5) 0.97 (24.6) METR-08 S1112-U70

BSPT – Cap Style (per ISO 7 or BS 21)

Dimensions are in inches (mm). *Optional seal materials are FKM (Viton), EPDM and Buna N – Example: MET-085TCB = Buna N

Connect to: Swivel Style Plug/Cap Style


FasTest connectors are a critical part of our customers’ quality assurance. FasTest’s seals and repair parts are specifically engineered for your connector. To ensure and prolong the peak performance of FasTest connectors, proper maintenance with FasTest Genuine Parts, including seals, o-rings and other wear components, is required. FasTest connectors require main seals and internal components to be replaced periodically throughout the connector’s life.

Only FasTest Genuine Parts should be used with FasTest connectors. Main seals and replacement parts are made and specified by FasTest for FasTest connectors. FasTest Genuine Parts ensure that our customers’ production line and manufacturing processes are performing to the highest standards.

Connector main seals should be visually inspected every 1000 actuations. For regularly used connectors, main seals should be replaced at least every 10,000 actuations or every three months, whichever occurs first. Each FasTest connector should be disassembled and rebuilt with new key wear components once every six months to maintain their optimal performance. This ensures the internal components and lubricants will continue working at peak performance.

Visual inspection every 1,000 actuations

SuggestedMaintenance

Timeline

Replace seals

every 3 months

Rebuild connector every 6 months

FasTest Connector Maintenance

How to Order Seals and Replacement Parts

1. Visit fastestinc.com

2. Enter the product number in the “Quick Search” tab or select the “Product Selector” tab

3. Click on the desired FasTest product to go to the product page

4. View corresponding seals and replacement parts under “FasTest Genuine Parts”

5. Either click “Add to cart” or “Add to quote” to purchase the selected product through the FasTest website, or contact your local distributor

NOTE: Connector maintenance, operating and rebuild instructions are available under the “Instructions” tab on individual product pages.

Main Seal

Notifications and Copyright

Specifications in this brochure are subject to change without notice. FasTest also reserves the right to make modifications and makes no guarantee of the accuracy of the information contained herein.

FasTest is a registered trademark with the US Patent & Trademark Office.

© 2018 FasTest Inc. All rights reserved. No part of this publication may be reproduced without written permission.

Patents

FasTest Inc. takes pride in its innovative quick disconnect coupling solutions, many of which have been awarded United States and International patents. FasTest Inc. has a strong tradition of leadership in the quick disconnect market, and aggressively pursues and protects its proprietary information and intellectual property.

All products are designed and manufactured by FasTest Inc. USA

Limited Express Warranty

FasTest Inc. warrants its products against defects in workmanship and materials for 12 months from the date of sale by FasTest Inc. or its authorized distributor. This warranty is void if the product is misused, tampered with or used in a manner that is contrary to FasTest Inc.’s written recommendations and/or instructions.

See website for complete warranty information.

Custom Applications

FasTest has full engineering and manufacturing capability to provide special accommodations to meet specific applications. Our engineers are available to review your unique application requirements.

Certifications

FasTest Inc. is ISO 9001: 2015 certified.

Proudly Manufactured in the U.S.A.

Headquarters in USA1646 Terrace Drive • Roseville, MN 55113-1317

Phone: +1.651.645.6266 Fax: +1.651.645.7390 www.fastestinc.com

FasTest Distribution Network | Global Coverage, Local Support

twistmate™ quick connectors

Documents