twin hook systems€¦ · launch and recover the boat. the hooks are off-load hooks (inherently...
TRANSCRIPT
TWIN HOOK SYSTEMSHenriksen Twin hook system has proven to be the best system for launch and recovery of large workboats for navies and the offshore industry. The system is based on the same principles as our traditional Henriksen single point lift.
TWIN HOOKS SYSTEMS
HOOK HMKTW*RING HLR / HLRESWIVEL JOINT
HSL
TWIN HOOKWe deliver twin systems for different types of crafts in several versions. The system can be operated manually, pneumatic or electrically. We can also integrate the painter hook in to the system. This will reduce the risk of operational danger when launch and recover the boat.
The hooks are off-load hooks (inherently safe system) and a twin system is the safest way to launch a tender, interceptor or workboat which does not require approval as a lifeboat/FRC.
LIFTING RINGSWe supply Henriksen original lifting rings for all Henriksen hooks. They are safe and easy to operate with handles that provide a good grip. We strongly recommend the use of our Henriksen lifting rings with our Henriksen hooks as these have geometry that is designed to fit together.
OPERATION OF AN OFF-LOAD HOOKLaunch1. When the boat is being lowered down and is close to water level, activate the
twin release system.2. When the boat is waterborne, the hooks automatically release the lifting rings.Recovery1. Prepare the hooks for recovery by resetting the system.2. Grab the lifting rings and connect them by pushing them into the hooks.
INTEGRATED HENRIKSEN SYSTEMAll Henriksen HMK hooks can be used in combination with an Integrated Henriksen System (IHS) and a painter hook. We recommend using a IHS system anywhere applicable as it removes the possibility of certain major operator errors and thereby significantly reduces operational risk.
• All materials used in the Henriksen Hooks are high quality and suitable for marine environment (saltwater proof). The hooks are made of stainless steel and duplex steel.
• All hooks are delivered in a practical wooden box.
C:\_Vault\Designs\HOOKS\Catalog\Hooks Product range 2015.idw
TordT
+
DESIGNED BY:
1 / 1 - A1EDITION SHEET - SIZE
DATE:07.08.2015
PROJ. METHOD:
UNLESS OTHERWISE STATED, TOLERANCE:DIM.: ISO-2768-1-m THREADS: 6g/6H SURFACE: Ra 3,2 EDGE 0,2 x 45°
MATERIAL: SURFACE TREATMENT: N/A
APPROX. MASS: N/ABASE ITEM:
PART NUMBER:HH000027
DESCRIPTION:HMKST 5.0, MOB-Hook, WLL 5.0 T
DATE APPROVED:
This document is proprietary information of H. Henriksen Mek. Verksted AS and shall not be copied without our written permission, and the contents thereof must not be imparted to a third party nor be used for any unauthorized purpose.
HMKST ( 3,5 / 5 / 8 / 15 ) HMKG ( 3,5 / 5 / 8 / 12 / 15 / 22,5 ) HMKR ( 3,5 / 5 / 8 / 12 / 15 )
HMKRW ( 3,5 / 5 / 8 / 15 )
HMKRHB ( 3,5 / 5 / 8 )
HMKRHF ( 15 ) HMKRWH ( 3,5 / 5 / 8 / 15 ) HMKRHI (12)
NORHMK ( 5 / 10 / 15 )
HCH ( 1,5 / 3,5 / 6,5 / 10 )HMKF ( 3,5 / 5 / 8 / 15 )
HENRIKSEN HOOKSProduct range
HRH (1,5)
HPH ( 2,5 / 5 / 10 ) HSL ( 2,5 / 5 / 8 / 12 / 15 ) ADAPTER ( 2,5 / 5 / 8 / 12 / 15 ) HLR ( 1,5 / 3,5 / 5 / 8 / 10 / 12 / 15 ) Release handle HMKR_ hooks Release handle Painter
Protection bar HMKST hooks IHS ( 3,5 / 5 / 8 / 12 / 15 )
HMKTWE ( 5 / 8 / 12 )HMKTW ( 3,5 / 5 / 8 / 15 )
HMKTWV ( 3,5 / 5 / 8 / 15 )
Air compressor 12V or 24V
HMKTWP ( 12 / 15 )
Bolts and Nuts for all hooks
37
H. Henriksen ASTræleborgveien 153112 TønsbergPhone: 333 78 400Mail: [email protected]
The HOOKS on this page are all tested and delivered with product certificates.
For more information please visit: www.hhenriksen.com
TWIN HOOK SYSTEM SAFETY
SYNCHRONIZEDWhen lifting a vessel with a twin hook setup, it is important that the hooks are synchronized so that both hooks open and close at the same time. All our twin hook systems are designed this way.
ONE HOOK IS OFF-LOADED: BOTH HOOK STAY CLOSEDAll of our twin hook systems are designed with a connection between the two hooks that ensures that both hooks will stay closed if only one of the two are off-loaded.
BOTH HOOKS ARE OFF-LOADED: BOTH HOOKS OPENAll of our twin hook systems are designed with a connection between the two hooks that ensures that both hooks will open at the same time.
TWIN SYSTEM WITH IHSAll twin systems can be delivered with a painter in a IHS configuration for a even safer operation.
38
H. Henriksen ASTræleborgveien 153112 TønsbergPhone: 333 78 400Mail: [email protected]
The HOOKS on this page are all tested and delivered with product certificates.
For more information please visit: www.hhenriksen.com
HMKTW* / HHSRT TWIN HOOK SYSTEMS
HMKTWManual Simultaneous Release Twin System(7 / 10 / 16 / 30)
HMKTWVRemote Simultaneous Release Twin System with vertical cable entry(7 / 10 / 16 / 30)
HHSRTElectric Simultaneous Release Twin System(24)
C:\_Vault\Designs\HOOKS\Catalog\Hooks Product range 2015.idw
TordT
+
DESIGNED BY:
1 / 1 - A1EDITION SHEET - SIZE
DATE:07.08.2015
PROJ. METHOD:
UNLESS OTHERWISE STATED, TOLERANCE:DIM.: ISO-2768-1-m THREADS: 6g/6H SURFACE: Ra 3,2 EDGE 0,2 x 45°
MATERIAL: SURFACE TREATMENT: N/A
APPROX. MASS: N/ABASE ITEM:
PART NUMBER:HH000027
DESCRIPTION:HMKST 5.0, MOB-Hook, WLL 5.0 T
DATE APPROVED:
This document is proprietary information of H. Henriksen Mek. Verksted AS and shall not be copied without our written permission, and the contents thereof must not be imparted to a third party nor be used for any unauthorized purpose.
HMKST ( 3,5 / 5 / 8 / 15 ) HMKG ( 3,5 / 5 / 8 / 12 / 15 / 22,5 ) HMKR ( 3,5 / 5 / 8 / 12 / 15 )
HMKRW ( 3,5 / 5 / 8 / 15 )
HMKRHB ( 3,5 / 5 / 8 )
HMKRHF ( 15 ) HMKRWH ( 3,5 / 5 / 8 / 15 ) HMKRHI (12)
NORHMK ( 5 / 10 / 15 )
HCH ( 1,5 / 3,5 / 6,5 / 10 )HMKF ( 3,5 / 5 / 8 / 15 )
HENRIKSEN HOOKSProduct range
HRH (1,5)
HPH ( 2,5 / 5 / 10 ) HSL ( 2,5 / 5 / 8 / 12 / 15 ) ADAPTER ( 2,5 / 5 / 8 / 12 / 15 ) HLR ( 1,5 / 3,5 / 5 / 8 / 10 / 12 / 15 ) Release handle HMKR_ hooks Release handle Painter
Protection bar HMKST hooks IHS ( 3,5 / 5 / 8 / 12 / 15 )
HMKTWE ( 5 / 8 / 12 )HMKTW ( 3,5 / 5 / 8 / 15 )
HMKTWV ( 3,5 / 5 / 8 / 15 )
Air compressor 12V or 24V
HMKTWP ( 12 / 15 )
Bolts and Nuts for all hooks
C:\_Vault\Designs\HOOKS\Catalog\Hooks Product range 2015.idw
TordT
+
DESIGNED BY:
1 / 1 - A1EDITION SHEET - SIZE
DATE:07.08.2015
PROJ. METHOD:
UNLESS OTHERWISE STATED, TOLERANCE:DIM.: ISO-2768-1-m THREADS: 6g/6H SURFACE: Ra 3,2 EDGE 0,2 x 45°
MATERIAL: SURFACE TREATMENT: N/A
APPROX. MASS: N/ABASE ITEM:
PART NUMBER:HH000027
DESCRIPTION:HMKST 5.0, MOB-Hook, WLL 5.0 T
DATE APPROVED:
This document is proprietary information of H. Henriksen Mek. Verksted AS and shall not be copied without our written permission, and the contents thereof must not be imparted to a third party nor be used for any unauthorized purpose.
HMKST ( 3,5 / 5 / 8 / 15 ) HMKG ( 3,5 / 5 / 8 / 12 / 15 / 22,5 ) HMKR ( 3,5 / 5 / 8 / 12 / 15 )
HMKRW ( 3,5 / 5 / 8 / 15 )
HMKRHB ( 3,5 / 5 / 8 )
HMKRHF ( 15 ) HMKRWH ( 3,5 / 5 / 8 / 15 ) HMKRHI (12)
NORHMK ( 5 / 10 / 15 )
HCH ( 1,5 / 3,5 / 6,5 / 10 )HMKF ( 3,5 / 5 / 8 / 15 )
HENRIKSEN HOOKSProduct range
HRH (1,5)
HPH ( 2,5 / 5 / 10 ) HSL ( 2,5 / 5 / 8 / 12 / 15 ) ADAPTER ( 2,5 / 5 / 8 / 12 / 15 ) HLR ( 1,5 / 3,5 / 5 / 8 / 10 / 12 / 15 ) Release handle HMKR_ hooks Release handle Painter
Protection bar HMKST hooks IHS ( 3,5 / 5 / 8 / 12 / 15 )
HMKTWE ( 5 / 8 / 12 )HMKTW ( 3,5 / 5 / 8 / 15 )
HMKTWV ( 3,5 / 5 / 8 / 15 )
Air compressor 12V or 24V
HMKTWP ( 12 / 15 )
Bolts and Nuts for all hooks
ELP
AWARELIGHT
L&R
PAINTER
HOOK(S)
HOLD
SOUNDLIGHTS
C:\_Vault\Designs\HOOKS\Catalog\HHSR Catalog.idw
AudunAB
+
DESIGNED BY:
1 / 1 - A4REVISION: SHEET-SIZE:
DATE:2016-04-06
PROJ. METHOD:
UNLESS OTHERWISE STATED, TOLERANCE:DIM.: ISO-2768-1-m THREADS: 6g/6H SURFACE: Ra 3,2 EDGE 0,2 x 45°
MATERIAL: SURFACE TREATMENT: N/A
APPROX. MASS: 41,474 kgBASE ITEM:
PART NUMBER:HH000129
PART NAME:
HHSR 12T
DATE APPROVED:
This document is proprietary information of H. Henriksen AS and shall not be copied without our written permission, and the contents thereof must not be imparted to a third party nor be used for any unauthorized purpose.
F
B
A
E
D
G
H
C
C:\_Vault\Designs\HOOKS\Catalog\HHSR Catalog.idw
AudunAB
+
DESIGNED BY:
1 / 1 - A4REVISION:SHEET-SIZE:
DATE:2016-04-06
PROJ. METHOD:
UNLESS OTHERWISE STATED, TOLERANCE:DIM.: ISO-2768-1-m THREADS: 6g/6H SURFACE: Ra 3,2 EDGE 0,2 x 45°
MATERIAL: SURFACE TREATMENT: N/A
APPROX. MASS: 41,474 kg BASE ITEM:
PART NUMBER:HH000129
PART NAME:
HHSR 12T
DATE APPROVED:
This document is proprietary information of H. Henriksen AS and shall not be copied without our written permission, and the contents thereof must not be imparted to a third party nor be used for any unauthorized purpose.
F
B
A
ED
G
H
C
HMKTWEElectric Simultaneous Release Twin System(10 / 16 / 24)
C:\_Vault\Designs\HOOKS\Catalog\Hooks Product range 2015.idw
TordT
+
DESIGNED BY:
1 / 1 - A1EDITION SHEET - SIZE
DATE:07.08.2015
PROJ. METHOD:
UNLESS OTHERWISE STATED, TOLERANCE:DIM.: ISO-2768-1-m THREADS: 6g/6H SURFACE: Ra 3,2 EDGE 0,2 x 45°
MATERIAL: SURFACE TREATMENT: N/A
APPROX. MASS: N/ABASE ITEM:
PART NUMBER:HH000027
DESCRIPTION:HMKST 5.0, MOB-Hook, WLL 5.0 T
DATE APPROVED:
This document is proprietary information of H. Henriksen Mek. Verksted AS and shall not be copied without our written permission, and the contents thereof must not be imparted to a third party nor be used for any unauthorized purpose.
HMKST ( 3,5 / 5 / 8 / 15 ) HMKG ( 3,5 / 5 / 8 / 12 / 15 / 22,5 ) HMKR ( 3,5 / 5 / 8 / 12 / 15 )
HMKRW ( 3,5 / 5 / 8 / 15 )
HMKRHB ( 3,5 / 5 / 8 )
HMKRHF ( 15 ) HMKRWH ( 3,5 / 5 / 8 / 15 ) HMKRHI (12)
NORHMK ( 5 / 10 / 15 )
HCH ( 1,5 / 3,5 / 6,5 / 10 )HMKF ( 3,5 / 5 / 8 / 15 )
HENRIKSEN HOOKSProduct range
HRH (1,5)
HPH ( 2,5 / 5 / 10 ) HSL ( 2,5 / 5 / 8 / 12 / 15 ) ADAPTER ( 2,5 / 5 / 8 / 12 / 15 ) HLR ( 1,5 / 3,5 / 5 / 8 / 10 / 12 / 15 ) Release handle HMKR_ hooks Release handle Painter
Protection bar HMKST hooks IHS ( 3,5 / 5 / 8 / 12 / 15 )
HMKTWE ( 5 / 8 / 12 )HMKTW ( 3,5 / 5 / 8 / 15 )
HMKTWV ( 3,5 / 5 / 8 / 15 )
Air compressor 12V or 24V
HMKTWP ( 12 / 15 )
Bolts and Nuts for all hooks
Materials High quality stainless steel
Warranty 5 years (When the re-certification and annual inspection is followed)
Documentation Certificates, Installation-, Operation-, and Maintenance Manual
Packaging Wooden case
Optional Accessories • Certified bolts and nuts• Henriksen Swivel Joint• Henriksen Lifting Ring• Integrated Henriksen System (IHS)
39