twgt putters 2012
DESCRIPTION
2012 range of putter heads offered by Tom Wishon Golf TechnologyTRANSCRIPT
800.470.0072 • WISHONGOLF.COM54
SPECIFICATIONS – SERIES S2R PUTTERS
ITEM # Head Loft Lie Weight Face Height Blade Length Face Prog. Shaft to Use RH/LH
205 Model 1 RH 3° 71° 345g 23.5mm 110mm -5mm Straight RH
205-L Model 1 LH 3 71 345 23.5 110 -5 Straight LH
205 Model 2 RH 3 90 350 24.5 113 7 DBorSB RH
205 Model 3 RH 3 72 345 25 104 -2 Straight RH
205 Model 4 RH 4 74 380 23.5 116 -2 StraightorBellyLengthStraight RH
205 Model 5 RH 3.5 90 355 24 110 +7 DBorSB RH
Left Hand
White Version
Right Hand
S2R Series Putters
S2R - 1
Precision Heel/Toe Blade Style Putter Designs with CNC Milled Face and Sole in 5 Design Options
•Double CNC Milled Face for precision to ensure complete accuracy
•Three Level CNC Milled Sole elevates the leading and trailing edges to help reduce “scuffing” the putter and to enhance a slightly upward angle of attack into the putter, which is proven to be the key to consistent roll
•Designed in Five Different Heel/Toe Models to offer a wide range in putter fitting to golfers who prefer more conventional putter head styles
•Dark Platinum Nickel Finish delivers a beautiful, high-quality, non-glare appearance
•Model 5 designed with face groove pattern to enhance roll
•S2R Model 1 also available in matte white finish
Head Material:
17-4 Stainless Steel
Method of Mfg:
Investment Cast + CNC Milling of Face and Sole
Ferrule Required:
No
Bore Diameter:
For all S2R Putters - 0.370” parallel
Loft/Lie Bending:
For Models 1 & 3 - +/-4º in all directions by hosel
ForModels2,4,&5–Bendinghastobedoneontheshaft
55
S2R–2 shown with TWGT
Double Bend Shaft (left above)
and Single Bend Shaft (right above)
New face groove
design to enhance
roll
S2R model 4 is
suitable for belly
putter assembly
with #605-PT-Belly
putter shaft
S2R - 2
S2R - 4 S2R - 5
S2R - 3
800.470.0072 • WISHONGOLF.COM56
Mallet and Heel Toe High MOI Designs with Tungsten and Steel Weighting in Black and New White Versions
•Three Different High MOI Multi-Material Putter Designs including heel/toe weighted Smoooth Series Model 5
•Two Full Mallet Designs with One Heel/Toe Design each with significant weight addition capability to offer a wide range of putter fitting options
•Forged From Soft 6061 Aluminum with tungsten and steel weighting added to increase the MOI and pinpoint the CG for better performance
•White Versions of the Model 6 and 7 available for wider putter fitting options. White model 6 heel and center bore versions; white model 7 in heel bore only
•Model 5 with heavy steel heel/toe sections surrounding a soft 6061 aluminum center to increase MOI
Head Material:
Models 6 and 7 – 6061 Aluminum + Tungsten
Model 5 – 6061 Aluminum + 17-4 Stainless Steel
Bore Diameter:
For all Smoooth Series Models – 0.370”
Notes:
1) Lie Angle on the heel bore models determined by the double bend shaft. Custom lie fitting has to be done by bending the shaft
2)RHHeelBoremodelshavetouseaRHDoubleBendshaft;LHHeelBoremodelshavetouseaLHDoubleBendshaft
3) 14g tungsten weights should be epoxied in place in the weight bore
SMOOOTH Series Putters
SMOOOTH - 5
SPECIFICATIONS – SMOOOTH SERIES PUTTERS
ITEM # Head Loft Lie Wgt. Face Prog. H/T Radius F/B Radius Head Material Shaft to Use RH/LH
202-5 Smoooth 5 - Heel/Toe 4º 90º 335 7.75mm 600mm 500mm 6061 Al + Steel Dbl/SglBend RH/LH
202-6 Smoooth6-HeelBore 3 90 335-405 7.75 600 500 6061 Al + Tungsten Dbl/SglBend RH/LH
202-6-CB Smoooth 6 - Center Bore 3 74 335-405 7.75 600 500 6061 Al +
Tungsten Straight RH
202WHT-6-RH
Smoooth 6 White - Heel Bore 3 90 335-405 7.75 600 500 6061 Al +
Tungsten Dbl/SglBend RH
202WHT-CB-6-RH
Smoooth 6 White - CenterBore 3 74 335-405 7.75 600 500 6061 Al +
Tungsten Straight RH
202-7 Smoooth7-HeelBore 3.5 90 335-405 7.75 600 500 6061 Al + Tungsten Dbl/SglBend RH/LH
202-7-CB Smoooth 7 - Center Bore 3.5 74 335-405 7.75 600 500 6061 Al +
Tungsten Straight RH
202WHT-7-RH
Smoooth 7 White - Heel Bore 3.5 90 335-405 7.75 600 500 6061 Al +
Tungsten Dbl/SglBend RH
WEIGHTS FOR SMOOOTH SERIES PUTTERS
ITEM # DESCRIPTION
101-14 14 gram tungsten weights for all Smoooth Series putters (sold separately)
Smoooth 6 Center Bore
Smoooth Series #6 and #7 accept up to 5 tungsten weight disks to allow head weighting from 355 to 405 grams. Model #5 accepts up to 3 tungsten weights.
57
SMOOOTH - 6 SMOOOTH - 7
Smoooth 6
Center Bore
Smoooth 6 Showing
Weight Cavity on the Sole
Smoooth 7
Center Bore
Smoooth 7
Heel Bore
#6 AND #6CB WHITEVERSIONS AVAILABLE
#7 WHITEVERSION
AVAILABLE
800.470.0072 • WISHONGOLF.COM58
A Unique Series of Oversize Putters for a Much Higher MOI and Easier Alignment
•Two Significantly Oversize TWGT Putter Designs, one mallet style, one heel toe weighting design, for golfers to gain the utmost in off center forgiveness
•O/S Series Oversize Design Allows Much Easier Alignment because the much larger face width offers a greater straight edge area to line up to the target
•Wide Range of Custom Head Weight for Fitting is more possible through the two different types of weight bores on the two different models
•O/S Series Putters are 100% Fully CNC Machined from high strength 6061 soft aluminum alloy for the utmost in accuracy, precision and quality; finished in a brand new durable electrostatic paint
•O/SSeriesDesignsarebothsoldwithmatchingprotectiveheadcover included in the price
Head Material:
6061 Aluminum
Method of Manufacture:
100% CNC machined from 6061 aluminum block
Ferrule Required:
No
Bore Diameter:
0.375”
Loft/Lie Adjustment:
All loft or lie changes must be done by bending the shaft
SPECIFICATIONS – O/S SERIES PUTTERS
ITEM # Head Loft Lie Body Face Height Blade Length Face Prog. Shaft to Use RH/LH
206-OS-1 O/S Model 1 3° 90° 360g 33mm 140mm + 9mm DBorSB RH/LH
206-OS-2 O/S Model 2 3 90 360 32 126 +9 DBorSB RH/LH
O/S Series Oversize Putters
O/S Series #1
Note: O/S Model 1 accepts the 2, 4, 6, 9 gram weight plugs; O/S Model 2 accepts the 14 gram tungsten disks (see page 82)
O/S Series #2
59
O/S Series #1 O/S Series #2
O/S Series Model 1 allows the addition of up to 36 grams of headweight through the rear of the toe and heel areas of the head.
Model 2 accepts up to 5 of the 14 gram tungsten disks through the sole cavity on the rear of the head.
Each O/S Series putter head sold with matching headcover
USA, CANADA, UK & EUROPETom Wishon Golf Technology695 County Road 233
Durango, CO, USA 81301
Tel: 800-470-0072 (USA & Canada)
Tel: 970-375-0411 (all other countries)
Mon to Fri, 8AM to 4:30 PM, (MST/MDT)
www.wishongolf.com
EUROPE (Sweden, Finland, Denmark, Norway)Wilprod Sportagenturer AB/Bromma GolfAKvarnbacksvagen 28
Bromma, Sweden 179-68
Tel: 46 827 1430
Email: [email protected]
Web: www.wilprod.se
EUROPE (Benelux Countries)European Golf Components BVWindmolenbosweg 1A
Haelen, Netherlands, 6081-PE
Tel: 0475 510 747 or mobile 0653-375740
Email: [email protected]
Web: www.egcbv.eu
EUROPE (France)Golf N Swing10/14 Avenue General LeClerc
Le Pecq, France 78230
Tel: 33 139 161 860
Email: [email protected]
Web: www.golfnswing.com
UNITED KINGDOMDiamond Golf International, Ltd.U4/U5 Rudford Estate
Ford Road, Arundel
West Sussex, England, BN11 0BF
Tel: 44 (0)1903 726 999
Email: [email protected]
Web: www.diamondgolf.co.uk
EUROPE (Germany, Austria, Switzerland)TCF Golf GBRSiebenborn 28
Brey/Rhens, Germany, 56321
Tel: 49 (0)674 280 8491
Email: [email protected]
Web: www.tcfgolf.com
EUROPE (Germany)Clubmate Golf Augustinusstrasse 9C
Frechen, Germany, D-50226
Tel: 49 (0)6157 80366 40
Email: [email protected]
Web: www.clubmategolf.com
ASIA (Malaysia, Singapore)JNG Malaysia SDN BHDNo. 1; Jalan 3/116D
Kuchai Entrepreneurs Park
Kuala Lumpur, Malaysia, 58200
Tel: 60 37 980 0284
Email: [email protected]
Web: www.jnggolf.com
SOUTH AFRICAGolf Science Pty LtdUnit 6, Highway Park
Northgate Estate, Brooklyn
Western Cape, South Africa, 7405
Tel: 27 21 511 9066
Email: [email protected]
Web: www.golfscience.co.za
is a registered trademark of Tom Wishon Golf Technology.
©2012 TWGT All rights reserved. All other trademarks belong to their respective owners.
Prices published in the catalog and website do not include shipping and handling, and are U.S. currency prices only. Prices on all products are subject to change without notice and are quoted as FOB from our warehouse in Durango, CO.
TOM WISHON GOLF TECHNOLOGY DESIGNS ARE AVAILABLE FROM:
THE LEADING NAME IN CUSTOM CLUBMAKING DESIGN