tungsten carbide recycling
DESCRIPTION
http://www.machinetoolrecyclers.com/At Machine Tool Recyclers, we buy carbide, and offer top scrap carbide prices and immediate payment.TRANSCRIPT
-
Machine Tool Recyclers
At Machine Tool Recyclers, we buy carbide, and offer top scrap carbide prices and immediate
payment. Get cash for your carbide--start now.
Scrap, used, old, obsolete high-speed steel or tungsten carbide tooling:
drills, endmills, inserts, taps, router bits, etc
Wear parts like compacts, mining bits and saw tips
Drawing dies, stamping dies, nozzels
Soft carbide scrap / grinding sludge (payment after analysisabout 2 weeks)
Soft carbide scrap (swarf) recyclinghow do you get paid:
Shipping usually brings some of the coolant to the top. We remove this excess top oil before
sampling.
When your shipment arrives, core samples are taken and sent to an independent lab for analysis.
This is the proper way, as the heavier--and thus more valuable--material will have settled to the
bottom. When the analysis comes back it might read something like:
12.5% moisture 05.7% cobalt 19.8% other elements 74.5% tungsten
1,750# x 74.5% = 1,304# tungsten contained (sometimes called "tungsten units) 1,304# x $10.00 = $13,040 paid (typically in 2 or 3 weeks)
-
Tungsten carbide grinding sludge
Can you tell the quality of the carbide soft scrap without sending it to a lab?
No, you cannot.
A niton gun reading is likely to be way off
But because tungsten carbide sludge is so heavy, you can estimate the quality of the carbide sludge by
its weight.
Very heavy is very good:
not so heavy is not so good.
Soft scrap quality guesstimater
-
Shipment list:
Gravity 101: View from the Side
Palletizing a barrel raises
its center of gravity.
Shipping less than full
lowers the center of gravity
Shipping less than full places less stress on your containers.
No steel drum is UN rated to carry 3000 pounds of scrap carbide.
A full 55 gallon drum on a pallet is top heavy.
ent list:
Heavy duty pallet, easily sufficient for the load. Load centered, balanced and secured. Containers filled below capacity; weight even. Each containers lid tightly secured. Steel strapped in all three dimensions: Around; Back and forth; Across FedEx shipping label attached; gross, tare and net clearly marked.
-
Contact Us
Machine Tool Recyclers Inc
2005 Granart Road,
Sugar Grove IL 60554 630-964-5030
Email: [email protected]
http://www.machinetoolrecyclers.com/