tunas dielektrika nusantara
TRANSCRIPT
With our strong determination and efforts of professional team work which driven by self-leadership, we manage to become the trusted distributor in Indonesia. We believe that hard work, loyalty & reliability which results in customers satisfaction will complement our vision to achieve great Indonesian market.
PT. TUNAS DIELEKTRIKA NUSANTARAJl. P Tubagus Angke No. 10 Blok C7 Komplek Jelambar Center
Grogol - Petamburan, Jakarta Barat 11460, IndonesiaPhone: +62-21-5668266 Fax: +62-21-5640755 email: [email protected]
www.tunasdielektrika.com
TUNASDIELEKTRIKANUSANTARA
Inspire | Innovate | Implement
PT. TUNAS DIELEKTRIKA NUSANTARA
Sigit Wisnu DermawanSales [email protected] 8282 954/0878 8588 5874
Agung HaryadiSenior Sales [email protected] 8146 9928
Agus SetiawanSenior Sales [email protected] 3035 8958
PT. DYNAMICS CIRCUIT INDONESIA
Adi Wahyu SetiawanService [email protected] 0888 6600
www.tunasdielektrika.com
tunasdielektrika @tunasdielektrika_nusantara
Tunas Dielektrika Nusantara 2Megger
Battery Testing Equipment 3Transformer Test Equipment 5Circuit Breaker Test Equipment 9Cable testing, Diagnostic & Fault Locating Equipment 11Protection Relay Testing 15Digital Clampmeters 18Earth Testers 19Power Quality Analyzer 21Low Resistance Ohmmeters 22Insulation Testing 24
Multi 27
Utility Solutions 29
Merytronic 31
PMDT 33
Ground - TD 35
BETE Electrical Construction Tools 37
Tanbos 41
HCE 42
FLUKE 43
Dynamics Circuit Indonesia Authorised Service Center 45
PT. TUNAS DIELEKTRIKA NUSANTARA
Sigit Wisnu DermawanSales [email protected] 8282 954/0878 8588 5874
Agung HaryadiSenior Sales [email protected] 8146 9928
Agus SetiawanSenior Sales [email protected] 3035 8958
PT. DYNAMICS CIRCUIT INDONESIA
Adi Wahyu SetiawanService [email protected] 0888 6600
www.tunasdielektrika.com
tunasdielektrika @tunasdielektrika_nusantara
PT. TUNAS DIELEKTRIKA NUSANTARA was established in August 2010 to respond the challenges and great opportunities of Indonesia’s electrical tools & instruments necessity. We provide industrial electricity consultation and best quality products with excellent service for our customers through trusted principal.
tunasdielektrika @tunasdielektrika_nusantara
With our strong determination and efforts of professional team work which driven by self-leadership, we manage to become the trusted distributor in Indonesia. We believe that hard work, loyalty & reliability which results in customers satisfaction will complement our vision to achieve great Indonesian market.
5
Battery Testing EquipmentWith the increasing dependency of back up systems on battery strings, and the escalating cost of
replacing batteries, instrumentation and software systems that can measure, trend and manage the life-cycle of cells is a cost effective option.
Most battery systems are floating and have earth leakage monitors and trips if there is an earth fault. The Battery Ground Fault Tracer allows you to trace a faulty circuit easily in a complex floating system.
Battery Ground Fault Tracer • Easily locates ground faults in ungrounded dc systems; • Operates in high electrical noise environment High/low switch provides
the needed power to locate high impedance faults; • Simplifies fault tracing by identifying fault characteristic (resistive and
capacitive) magnitudes.
DLRO10HDCable height meter
• High or low output power selection for condition diagnosis; • Rechargeable battery or line power supply, continuous operation,
even with dead battery; • 10 A for 60 seconds, less time waiting to cool, great for charging
inductance; • High input protection to 600 V, inadvertent connection to line or
UPS voltage will not blow a fuse; • Heavy duty case: IP 65 lid closed, IP54 operational (battery
operation only); • Rotary switch selects one of five test modes, including auto start
on connection, giving ease of use.
BITE2/2PBattery Impedance Tester < 7000 Ah • Determines condition of lead-acid and NiCd cells up to 7000 Ah; • On-board Pass/Warning/Fail indications; • Robust, repeatable instruments; • On-line testing.
6
BITE3Battery impedance test equipment
• Determines health of lead-acid cells up to 2000 Ah • On-line testing with Pass/Warning/Fail calculations • Measures impedance, interconnection resistance and cell
voltage • Windows CE operating system with 32 MB of memory • Measures float and ripple currents • Includes PowerDB LITE Management Software
BVMBattery Voltage Monitor • Automates battery voltage measurement during
capacity tests • “Daisy-chain” design allows expandability up to 2x120
units • High accuracy and stability for precise datacollection • Wide voltage range • Easy set-up
TORKEL 900 - seriesBattery load units
• Batteries can be tested in service • Dynamic discharge technology – full power at all
voltages • Safety in all details, e.g. detection of blocked airflow • Real time monitoring during test • Quick report • Easily expandable for larger battery banks using
TXL extra load units • BVM cell monitor control integrated in the system
TXL830, TXL850 and TXL870Extra foad units for Torkel battery test systems • Provide higher load currents for concurrent power tests • Discharging process controlled by a TORKEL unit • Connect directly to the battery under test
They are designed for use together with TORKEL battery load units. Their purpose is to provide higher load currents for use in constant current or constant power tests. Together, TORKEL and the TXL extra loads form a system that can discharge batteries with currents of up to several kA. TXL extra loads are connected directly to the battery, and TORKEL measures the total current using a clamp-on ammeter.
7
Transformer Test EquipmentTransformers are very reliable devices and can provide service for a long time if maintained and
serviced regularly. They are also the single most costly item in any substation. To protect against failures that can result in costly repairs and long periods of downtime, trust your transformer to the accurate and reliable test equipment from Megger. The best insurance against transformer failure is to ensure that they are properly installed and maintained. The complete line of Megger equipment make testing easy and accurate.
OTS100AF, OTS80AF and OTS60AFLaboratory oil testers • Laboratory instruments for measuring insulating oil breakdown
voltage • Lock in precision – oil vessel with lockable adjustment • Bright 3.5” colour display • Suitable for mineral, ester and silicon oils • Trip detection circuit with direct measurement of voltage and
current • Ultra fast (< 10 µs) HV switch off time
OTD Oil Tan DeltaOil Tester
• NEW OTD - Oil Tan Delta tester measures Tan Delta, Relative Permittivity and Resistivity of insulating oils
• Fully automated standard and user defined tests - Supports all international standards
• Integrated test cell heating and cooling systems • Efficient oil fill and integrated automated oil drain facility • IEC 60247 Innovative Test Cell - easy to assemble and clean • Stores up to 50 records on-board and download to PC • Compact and lightweight (22 kg / 48.5 lbs)
FRAX99, Frax101 and Frax150 Sweep Frequency Response Analyzers • Highest dynamic range and accuracy in the industry • Smallest and most rugged FRA instrument in the industry • Fulfills all international standards for SFRA measurements • Advanced analysis and decision support built into the
software • Imports data from other FRA test sets
8
TTR300 seriesThree-Phase Transformer Turns Ratio Test Set
• Stand-alone or remote-control operation • Accurately measures ratio, phase deviation and excitation
current • Field upgradeable without compromise to calibration • Built-in capability for storing and downloading test results in an XML format, via RS-232,
Ethernet or USB ports (depending on model) • Works in the presence of high interference/high voltage
TTRU3True 3 Phase Transformer Turns Ratiometer • Guaranteed accuracy ±0.05% from -20°C to +50°C • 3Ø test voltage - up to 250V • 3Ø step up ratio (patent pending) • Phase shifting & zig-zag transformers tested easily and accurately • Smallest/lightest 3Ø test set on the market • Fast 3Ø tests - less than 10 seconds
TTR™100-1Handheld TTR
• Single- and three-phase transformer testing (up to 1 MVA) • Lightweight, handheld • Battery powered, line rechargeable • Tests turns ratio, phase displacement, excitation current, winding
resistance and polarity • RS232 for data transfer and printing • Stores 200 test results and 100 user-defined transformer test settings
MTO300 SeriesAutomated six-winding transformer ohmmeter • Automated 8-terminal/6-winding measurement capability • Simultaneous winding magnetization • Tests operation of on-load tap-changers • Built-in auto-demagnetization feature • Automatic discharge • Power DB software (MTO330)
9
MWA300/330A3-Phase Ratio and Winding Resistance Analyzer
• Combines TTR and resistance testing in one box - faster, more efficient testing
• 55% smaller, 40% lighter than individual instruments • Only one set of leads required - lighter, smaller and less expensive • One test form - easier, faster to complete • Built-in demagnetization
MRCTMegger Relay and Current Transformer Test Set • Industry leading test duration using patented simultaneous
multi-tap measurements reduces testing time by 20% on multi-tap CT’s
• Increased measurement accuracy to support metering class CT testing • Smallest and lightest 2kV secondary voltage injection unit on the market • Integrated single phase relay test system • General purpose substation secondary circuit testing with 300V & 60A generators • Grouped testing: demagnetization, knee points, ratios, saturation curves, and more • Measure all ratio’s and saturation curves on multi-tap CT’s with one lead connection • Built-in insulation resistance testing
MVCTMegger VT & CT Analyzer
• Ability to test both VT and CT • Easy to use one-button automated test plans • Industry leading test duration using patented simultaneous
tap measurements • Smallest and lightest unit on the market • CT Kneepoints up to 30kV • CT grouped testing includes Demagnetization, Knee Points,
Ratios, Saturation Curves, Winding Resistances, Polarities and Phase Deviation (on all taps of multi-ratio CTs)
• VT testing including Demagnetization, Ratio, Winding Resistance, Polarity and Phase Deviation
• Performs Secondary Burden tests • Integrated 1 kV DC insulation test system • Only one set of leads required - lighter, smaller and less expensive • One test form - easier, faster to complete • Built-in demagnetization
10
IDAX300/350Insulation diagnostic analyser
• Automated measurement and analysis of moisture content, tan delta/power factor and oil conductivity
• Individual temperature correction (ITC) of tan delta/power factor and oil conductivity
• 40% faster measurements with the new IDAX 5.0 SW • Reliable measurements in high-interference environments • Multi-function test set for transformer measurements
VAX0202 kV high voltage amplifier • Separate high voltage amplifier enables capacitance and
dissipation factor measurements at 2 kV test voltage • True and proven DFR/FDS technology for highest
performance • Large frequency range, DC to 1 kHz • Compact design, weight < 5 kg
TRAXTransformer and Substation Test System
• Replaces need for multiple test sets • Saves time by eliminating need for multiple instruments learning • User-friendly interface reduces training and testing time • Portable and compact system components for easy shipping • “State of the art” measurement methods for advanced diagnostic
testing
DELTA4000 Series12 kV Insulation Diagnostic System • Power factor test set • Automatic and manual operation • Accurate and repeatable measurement results with high noise
suppression • Lightweight, rugged two-piece design • New built-in intelligent temperature correction • New automatic voltage dependence detection
11
Circuit Breaker Test EquipmentCircuit Breakers are one of the critical “safety-valves” of electrical systems and basic maintenance
procedures are essential to maintain maximum reliability.
EGILCircuit breaker analyzer for breakers with one break per phase
• Suitable for testing timing and travel on all circuit breakers with single interrupter per phase
• Extremely easy-to-use and reliable • Two separate timing channels for measurement of auxiliary contacts • Analog measurement channels for travel transducers or general voltage/current
measurements • Static and dynamic resistance measurements along with the SDRM201 accessory
TM1700Circuit breaker analyser system • Provides reliable and accurate test results in noisy high
voltage substations
• Four standard models. Full stand-alone functionality or data acquisition models without user interface.
• Fast and safer with DualGround™ testing, both sides of breaker grounded
• On-screen assistance with connection diagrams and test template wizard
• All models can be controlled via computer
B10EAC/DC Voltage Power Supply
• Reliable and stable power supply for circuit breaker testing
• Continuously variable 24-250 V AC or DC output
• Separate outputs for close coil, trip coil and spring charging motor voltage
• Direct triggering for minimum trip voltage testing
• Operate with a breaker analyzer for efficiency in testing sequence
12
INGVARPortable 5000 A primary current injection test system • Most advanced primary current injection test system to
simplify all types of switchgear and CT commissioning, ground grid, circuit breaker testing and more
• Up to 5000 A output current • Two units, each of about 20 kg, makes it easier to carry
• Unique I/30 function allows the current to be pre-set using low current to prevent test sample heating, thus eliminating corruption of test result
SPI225Smart primary injection test system
• Up to 2000A output • Smallest primary injection test system in its class • First unit on the market to eliminate variac control • Output current regulation • Designed for switchgear commissioning, circuit breaker, CT commissioning, ground grid
and relay testing • Software includes thousands of circuit breaker TCC curves
VIDARVacuum interrupter tester
• Tests the integrity of vacuum interrupters quickly, safely and easily • User defined voltage selection • Extensive voltage range • Easy to operate. Follows ANSI/IEEE standardized DC test methods. • Lightweight and portable
ODEN ATSmart primary injection test system
• Most advanced primary current injection test system to simplify all types of switchgear and CT commissioning, ground grid, circuit breaker testing and more
• Modular design to permit optimal user configuration of output current vs. unit size
• Compact transport cart facilitates portability into switchgear rooms with limited space
• Unique I/30 function allows the current to be pre-set using low current to prevent test sample heating, thus eliminating corruption of test result
13
Cable testing, Diagnostic & Fault Locating Equipment
Power cable fault locating and testing takes on a whole new dimension with the modular cable fault locating concept from Megger. We have geared our development to the industry requirements for a more tempered fault locating method and have developed more sophisticated methods that reduce the stress on insulation systems.
70/120/160 kV DCHigh Voltage DC Dielectric Test Sets
• Lightest weight available in air-insulated high-voltage model • Advanced performance with long-term reliability provided by
filtered half-wave rectification • Designed for maximum operator safety
DigiPHONE+Cable Fault Pinpointer
• Finds the fault with unprecedented accuracy
• Offers simple visual directions • Possesses smart background noise
reduction • Automatically limits audio volume to 84
decibels • Requires no user adjustments
HVB10High voltage bridge for fault location in long cables • Top class measurement and accuracy • Automatic test sequence • Bi-polar prelocation for the elimination of external influences • Detection and indication of wrong connections • Only one HV connection cable • Completely independent of the parameters of auxiliary lines • easyGo operating system
14
VLF Sine Wave 45 kVCable Tester • Test capacity of up to 10μF – that’s up to 40 km or 25.8
miles of cable at reduced frequency and voltage
• Internal tanδ option with automatic results interpretation
• One minute burn after fault detection
• Automatic frequency adjustment based on cable length
• Adjustable DC pulse rates of 1:3 and 1:4
• IEEE compliant withstand testing for new installations up to 25 kV
• IEEE 400.2 compliant maintenance testing up to 35 kV
• IEC 60229 compliant sheath testing up to 20 kV DC
VLF Sine Wave 34 kVMedium voltage diagnostic test set • High test capacity of 5 μF • Suitable for outdoor use (IP 54) • Single-button operation • Integrated safety system • Reporting • Continuous duty cycle
VLF CR-28 – up to 60 kVPortable VLF test systems for testing medium voltage cables • VLF, DC and sheath fault testing in one device • Portable thanks to two-part construction • High test capacitance • Integrated discharge system • Reporting • Parameterisation via chip-card
15
PFL32M1500Portable Cable Fault Location System • Portable, rugged fault locating system • HV insulation testing up to 32 kV • Proof/burn up to 32 kV, 65/35 mA • 16/32 kV, 1500 Joules surge output • Arc reflection method • Arc reflection plus • Differential arc reflection • Impulse current (ICE) • Integrated 10.4” screen color TDR
SFX25-1150 MMobile, battery operated cable fault locating system • VLF, DC and sheath fault testing in one device • Portable thanks to two-part construction • High test capacitance • Integrated discharge system • Reporting • Parameterisation via chip-card
EZ-THUMP™ SeriesPortable Fault Location Systems
• Compact, lightweight and rugged field instruments
• Battery and AC line operation
• Automatic end-of-cable and fault locating
• 4-kV or 12-kV output versions available
• Transflective color display
• ARM® Prelocation
• Fault Pinpointing (Thumping)
• Optional Sectionalizing Software*
• 4 or 12 kV DC testing
16
TDM 45 SeriesThe NEW high power test and diagnosis combination for MV cables
• Cable testing, cable diagnosis and sheath testing in one device • Enables standard compliant high power VLF testing at 0.1 Hz (5 μF @ 40 kVrms) • Internal tanDelta measurement with automatic result interpretation • Partial discharge diagnosis using VLF Sine wave • Damped AC or 50/60 Hz Slope technology voltages
TDM 45 Base module TDM 4540 Base and Boost module
PDS 60 PD module
The operating software is designed so that any user will come to grips with it immediately:• Integrated database, simplified searching, browsing and administration of measurement
and cable data.• Improved fully automatic calibration with display of signal to noise ratio.• “Live” PD mapping: The PD evaluation algorithm enables a reliable automatic detection
and precise location of partial discharges (PD mapping) whilst the measurement is taking place. Time-consuming post-processing of the measurement data is no longer needed, maintenance resources can be directly scheduled.
• Reporting by mouse click: immediately after the measurement has been completed, the operator can create a report with a clearly structured summary of the most important measurement data with a simple mouse click. Parallel it is also possible to generate customized reports which can be saved as templates.
17
Protection relay testingThe multiple protection function of today’s protection relay systems requires a new level of
sophisticated test hardware and software to completely analyze the operation of the unit in a “real life” situation. Every facet of relay testing can be handled with the comprehensive line of relay test equipment from Megger.
SVERKER750/780Single-Phase Relay Test Sets
• The engineer’s toolbox for all single phase relay testing! • Stand-alone functionality • Rugged and reliable for field use
SVERKER900Relay and Substation Test Systems • The toolbox for substation 3-phase testing • Three currents and four voltages • Stand-alone functionality • Rugged and reliable for field use • Generation of 900 V and 105 A in single phase mode • Secondary and primary testing
SMRT1Single Phase Relay Test System
• Small, rugged, lightweight and powerful • Operate with or without a computer • Intuitive manual operation with Smart Touch View Interface • High current, high power (75 Amps/400 VA rms) • Network interface provides IEC 61850 test capabilities • Fully automated testing using AVTS software
SMRT43Megger Smart Grid Relay Test System • Small, rugged, lightweight and powerful • Operate with or without a computer • Intuitive manual operation with Smart Touch View Interface • High current, high power output (45 Amps/300 VA rms) per
phase • 4 Voltage channels, 3 Current channels • Dynamic, Transient and GPS Satellite Synchronized End-to-
End Testing Capability • IEC 61850 Testing Capability
18
SMRT43DMegger Multi-Phase Relay Test System • Integrated Smart Touch View Interface™ running RTMS
software provides standalone operation using intuitive high resolution graphic touchscreen, no PC required
• 4 Voltage channels, 3 Current channels
• High current output - 45 Amps at 300 VA per phase
• Dynamic, Transient and GPS Satellite Synchronized End-to-End Testing Capability
• IEC 61850 Testing Capability
SMRT46Megger Multi-Phase Relay Test System • Small, rugged, lightweight and powerful
• Operate with or without a computer
• Intuitive manual operation with Smart Touch View Interface
• High current, high power output (60 Amps/300 VA rms) per phase
• 4 Voltage channels, 3 Current channels, with convertible voltage channels provides 1 voltage and 6 currents
• Dynamic, Transient and GPS Satellite Synchronized End-to-End Testing Capability
• IEC 61850 Testing Capability
SMRT46DMegger Multi-Phase Relay Test System • Integrated Smart Touch View Interface™ provides
stand-alone operation using intuitive high resolution graphic touchscreen, no PC required to operate
• 4 Voltage channels, 3 Current channels, with convertible voltage channels provides 1 voltage and 6 currents
• High current output - 60 Amps at 300 VA per phase
• Convertible voltage channels – 15 Amps at 120 VA
• Dynamic, Transient and GPS Satellite Synchronized End-to-End Testing Capability
• IEC 61850 Testing Capability
19
SMRT410Megger Relay Test System • Small, rugged, lightweight and powerful
• Operates with or without a computer
• Intuitive manual operation with Smart Touch View Interface
• High current, high power output (60 Amps/300 VA rms) per phase
• Flexible output design provides up to four-phase voltage and up to ten-phase current
• Network interface provides IEC 61850 test capabilities
• Fully automated testing using AVTS software
• Up to 10 current output
• Up to 5 voltage output
SMRT410DMegger Multi-phase Relay Test System
• Integrated Smart Touch View Interface™
• Multi-colored graphics with intuitive navigation
• Stand-alone operation, no PC required to operate
• High current output - 60 Amps at 300 VA per phase
• Flexible output design provides up to 10 currents
• Dynamic, Transient and GPS Satellite Synchronized End-to- End Testing Capability
• IEC 61850 Testing Capability
ERTSElectronic Recloser Test Simulator • Rugged, Small, Light Weight, FieldPortable
• 14, 19, and 32 pin Cable Adapters Built-in
• Used with Megger Relay Test Systems
• Simulate Three-Pole or Single-Pole Trip andReclose
• Use Sequencer Test to Easily Perform
• Trip and Reclose Tests on both Electronic
• Controller and Recloser
20
Digital ClampmetersThe Megger range of clampmeters are an invaluable tool; since there is no need to switch off or
break the circuit. They offer a safe, non-intrusive way of diagnosing faults on live electrical circuits.
DCM15001500 A TRMS clamp meter
• DC and AC current up to 1500 A • True RMS measurement for greater accuracy • Large jaw size safely assists with uninsulatedconductor measurements • 750 VAC and 1000 VDC • Resistance , continuity and frequency • Peak, min/max and data-hold functions
DCM310 and DCM320Digital clampmeters
• Current only and multimeter models • Measures up to 400 A a.c. with low current ranges for improved resolution • 600 V ac/dc (DCM320) • Max Hold (DCM310) • 20 MΩ Resistance (DCM320)n IEC61010 CAT III 600 V
DCM340Digital clampmeter
• DC and AC current and voltage • 600 A and 600 V • Resistance and continuity • 31⁄2 digit, 4000 count display with backlight • High resolution digital bargraphn Peak, min/max and data-hold functions
DCM305EEarth Leakage Clampmeter
• 0.001 mA resolution • Up to 100 A AC • TRMS reading • Low pass filter to aid stability of readings • Auto, data & peak hold • 40 mm jaw
21
Earth TestersGround resistance testing covers the testing of earth electrodes and the measurement of soil
resistivity. The instrument requirements depend on the range of applications.
Megger offers top end systems for design and soil surveys as well as tough easy to use testers for field engineers. We have tried to make the testers self checking as much as we can, to allow you to concentrate on collating and understanding the results.
DET3TD3-Terminal Earth Leakage Clampmeter • 2 and 3 point testing • Choice of digital or analog display • Warning indicators prevent test failure • IP54 rated • Complete with leads, stakes and rugged carry case • Simple one button operation • Calibration test certificate included
The DET3 contractor series includes: • DET3TC: capable of testing on-site grounds without disconnecting the utility
connection • DET3TD: for basic requirements it provides digital ground testing and bond test
capabilities
DET4T2 Series4-Terminal Earth Resistance and Soil Resistivity Testers
• 2, 3 and 4 point testing • Stakeless or clamp-on testing option • ART (Attached Rod Technique) capability • Multiple, user selectable test frequencies • Resistance measurement range to 200 kΩ • IP54 rated • Warning indicators prevent test failure • Simple one button operation • Included leads, stakes, calibration certificate and rugged carry case
The DET4 contractor series includes: • DET4TD2: Dry-cell battery powered basic 4-terminal tester • DET4TR2: Rechargeable battery powered basic 4-terminal tester • DET4TC2: Dry-cell battery powered 4-terminal tester with selectable test frequencies,
greater measurement sensitivity and attached rod technique and stakeless measurement capability
22
• DET4TCR2: Rechargeable battery powered 4-terminal tester with selectable test frequencies, greater measurement sensitivity and attached rod technique and stakeless measurement capability
The DET4TD, DET4TC and DET4TCR replace the DET5/4R and DET5/4D.
DET14C and DET24CDigital Earth Clamps • Elliptical clamp shape improves access to earth cables and straps up to
50 mm • Low maintenance flat jaw interface • Measures ground resistance from 0.05 Ω to 1500 Ω • Measures true RMS ground leakage current from 0.5 mA rms to 35 A
rms • CAT IV 600 V safety rating • Backlit LCD display
DET2/3Advanced Earth (Ground) Tester
• High resolution of 1 mΩ, ideal for large earth (ground) systems
• Versatile test modes • High accuracy for earth (ground) electrode grid and soil
resistivity tests • Rechargeable battery power that can last all day with a
fast re-charge (up to 10 hours) • Robust instrument with IP65 protection • Automatic test frequency selection, with filters and high
current features • Diagnostic trace display • Data storage • Large colour display that shows numeric and graphical
results
GTS-300Safety Ground and Ground Grid Test Set
• Fast setup • No specialized training required • Digital instrumentation
The GTS-300 is a two-piece test set designed to ensure the integrity of grounding systems and to test personal safety grounds. The high-current method of testing ground grid continuity and connections is a reliable, accurate method of detecting faults in the ground system.
23
Power Quality AnalyzerPower quality analysis system, which is used to log data, analyse loads and to capture network
disturbances.
MPQ1000Handheld Power Quality Analyzer
• Automatic CT recognition
• Automatic connection verification
• On-board data analysis
• SD card and USB stick support
• 1000 V ac and 1000 V dc range
• Scope and DMM modes
• CATIV @ 600 V
• IEC61000-4-30 Class A compliant
• Made in USA
MPQ2000Portable Power Quality Analyzer
• IEC61000-4-30 Class A compliance
• Powered off of phase A voltage ac/dc
• 1000 Vac and 1000 Vdc range
• Real time scope and DVM
• Connection verification
• On-board data analysis
24
Low Resistance OhmmetersFrom Megger, these highly accurate, easy to operate instruments measure resistance with
resolution as fine as 0.1 micro-ohm. Digital micro-ohmeters and DLROs measure contact resistance of switch and circuit breakers, aircraft frame bonds, and rail and pipeline bonds just to name a few of the applications. Megger has models available for testing using test currents from 0.5 mA to 200 amps covering a multitude of applications that require precise low-resistance measurements.
MJÖLNER 200Micro-ohmmeter
The MJÖLNER™ 200 is designed to measure the resistance of circuit breaker contacts, bus-bar joints, contact elements in bus-bars and other high-current links. This product is designed with safety, ease of use and versatility in mind.
• Fully automatic testing – Micro processor controlled
• Safe test – DualGround™ and Remote control
• Remote control from mobile app
• True DC – ripple free current
• Lightweight suitcase – withstands the impact of water, dust or sand
• Built in thermal printer
• PC interface connection
MJÖLNER 600Micro-ohmmeter
The MJÖLNER™600 is designed to measure the resistance of circuit breaker contacts, bus-bar joints, contact elements in bus-bars and other high-current links. The product has been designed with safety, ease of use and versatility in mind.
• Fully automatic testing – Micro processor controlled
• Safe test – DualGround™ and Remote control
• Remote control from mobile app
• True DC – ripple free current
• Lightweight suitcase – withstands the impact of water, dust or sand
• Built in thermal printer
• PC interface connection
25
DLRO100 SeriesMegger Digital Low Resistance Ohmmeters • CAT IV 600 VAC / 500 VDC for safe operation
• Lightweight 100 A battery powered unit for portability
• High noise immunity for stable readings
• Smooth DC Output for circuit breaker testing
• IP54 for protection against dust and moisture while testing
• Save, download and delete results (100X/H variants)
• Remote operation, Bluetooth® & asset/result tagging (100H variants)
DLRO 200Digital Microhmeter
• Small and weighs less than 15kg
• Test currents from 10 A to 200 A d.c.
• 0.1 µΩ best resolution
• On board memory for up to 300 test results and notes
• RS232 port to download stored results or for real time output to a printer
• Supplied complete with 5m test leads and download software
DLRO 600Digital Microhmmeter • Small and weighs less than 33 lbs (15 kg) • Test currents from 10 A to 600 A dc • 0.1 µohms best resolution • On board memory for up to 300 test results and notes • RS232 port to download stored results or for real time output to a
printer • Supplied complete with 16.4 ft (5 m) test leads and download
software
MOM2Hand-held 220 A micro-ohmmeter
• Up to 220 A • Battery powered • Light weighs only 1 kg • Safe test – DualGround™ • Auto range: 1 μΩ to 1000 mΩ • Bluetoot® PC communication • Complies with IEEE and IEC standards
26
Insulation TestingMegger is the originator of the insulation tester with over 100 years of experience and leadership
in providing high performance insulation testers for electrical equipment diagnostic applications.
Regular insulation testing is one of the most cost effective methods of identifying aging in any type of electrical equipment. With over 60% of equipment failures being ascribed to insulation breakdown, it is a key area to monitor for early identification of potential failure problems.
Today Megger offers the finest line of 5 kV and 10 kV insulation resistance testers available anywhere. In particular, our line of S1 Series Insulation Testers offers unparalleled capability including battery or line operation, the best measurement ranges, the highest noise resistance, five automatic tests, data storage, RS232 or USB download and MUCH MORE.
MIT152515kV Insulation Resistance Testers
• Measures up to 30 TΩ • Safety rated up to CAT IV 1000 V to 3000 m • Unique dual-case design - additional user protection • Operates from battery or AC mains supply • Rapid charge Li-ion battery • Advanced memory with time/date stamp
MIT102510kV Insulation Resistance Testers
• Measures up to 20 TΩ • Safety rated up to CAT IV 1000 V to 3000 m • Unique dual-case design - additional user
protection • Operates from battery or AC mains supply • Rapid charge Li-ion battery • Advanced memory with time/date stamp
MIT5255kV Insulation Resistance Testers
• Measures up to 15 TΩ • Safety rated up to CAT IV 1000 V to 3000 m • Unique dual-case design - additional user protection • Operates from battery or AC mains supply • Rapid charge Li-ion battery • Advanced memory with time/date stamp
27
MIT3030-kV High Voltage Insulation Tester
• Continuously variable test voltage, 0 – 30kV • Test current 0 - 330 μA • Output voltage accuracy, + 1.5% (full scale) • Built-in adjustable ionization indicator • Fail-safe grounding and “zero-start” switches • Rugged, compact, lightweight, and portable
MIT200 SeriesDigital/Analog Insulation and ContinuityTesters
• Insulation testing to 1000 MΩ • Continuity testing at 200 mA down to 0.01 Ω • Live circuit warning (voltage display) and test
inhibit • Digital/analogue display • Alkaline or rechargeable batteries • –10 °C to +55 °C operating temperature • CAT III 600 V • Conforms to EN 61557
MIT300 SeriesInsulation and Continuity Testers
• Extremely easy to use • Tough rubber armoured case • Self contained protective cover • Live circuit warning • Weatherproof to IP54 • Intelligent Safety System for protection • Result storage and downloading • Download software included • USB interface
28
MIT400/2CAT IV Insulation testers
• Designed for Electrical and Industrial testing • Insulation testing up to 1000 V and 200 GΩ range • Stabilised insulation test voltage (New) • Single range, faster continuity testing from 0.01 Ω to 1 MΩ (New)
• Adjustable insulation test voltage from 10 V to 1000 V (New) * • 600 V Trms AC and DC voltage measurement • Test result storage and Bluetooth®downloading * • Live circuit detection and protection • Rechargeable options for mains and car charging (New) * • CAT IV 600 V and IP54
S1-156815kV Insulation Resistance Testers
• Resistance range up to 30 TΩ • 8 mA noise rejection plus 4 filters • Safety up to CATIV 1000V to 4000 m • Rapid charge Li-ion battery – meets IEC62133 • Operate with flat battery from an AC source • Tough dual case design
S1-106810kV Insulation Resistance Testers
• Resistance range up to 20 TΩ • 8 mA noise rejection plus 4 filters • Safety up to CATIV 1000V to 4000 m • Rapid charge Li-ion battery – meets IEC62133 • Operate with flat battery from an AC source • Tough dual case design
S1-5685kV Insulation Resistance Testers
• Resistance range up to 10-Ω • 8 mA noise rejection plus 4 filters • Safety up to CATIV 1000V to 4000 m • Rapid charge Li-ion battery – meets IEC62133 • Operate with flat battery from an AC source • Tough dual case design
29
MULTI Measuring InstrumentsMULTI MEASURING INSTRUMENTS CO., LTD is a leading company contributing to promote
renewable energy.
MA-70BInsulation resistance/Induced voltage tester for high voltageSwitchable two steps of low-voltage range and high-voltage range Measurable induced voltage insulation resistance (NOT live-working) Can easily inspect induced voltage and insulation resistance after electrical wire operation(not live-working) on joint spanning power transmission for earth grounding condition • Length: 2742mm • Use voltage range: Induced voltage less than 35kV on power
cutted line • Inspection: Direct contactive method φ5mm~1160mm2/naked wire • Max induced voltage capacity: Use voltage range~0~3.5kV/0~35kV(Double gauge reading)
Switchable~3.5kV/35kV • Max insulation resistance capacity: 2000MΩ/1000V • Withstand voltage: 50kV/1min • Power Supply: AA Battery(SUM-type3)*8 • Weight Approx.5.5kg
HWT-301Digital Harmonics Clamp Tester
• Harmonics and leakage current measurements. • Up to 25th harmonics curwrent and voltage measurements. • True rms reading for ACA and ACV. • Data-hold and Auto power off function. • Conform to IEC safety requirements.
HCL-1000DHigh Insulation Digital Clamp Tester
AC Current measurements for high voltage circuit • Safe AC current measurements by optional hot stick
for high voltage circuit. • Wide AC current measurements for 0.1A~600A. • AC 80Vrms to 46KVrms (Depend on the specification of hot stick) • Measuring Range AC 0~20A/600A (50Hz/60Hz), 2 ranges manual • Easy operation, Push to Open and Pull to Disconnect Mechanism. • Easy screw connection for optional hot stick. • Sealed for splash proof and contaminants.
30
Earth Grounding HooksFor Electrical Purpose
EF5
E6
BP1EF1
For Railway Purpose For Electrical and Railway Purpose
B6 N5
E26 SE23
ID CurrentVoltage Range
(kV)
Length*Sections
(mm)
HookApplication
(Twisted wire
& Bracket)
Weight (kg)
Standard grounding
wire (mm2 * m)
ID CurrentVoltage Range
(kV)
Length*Sections
(mm)
HookApplication
(Twisted wire &
Bracket)
Weight (kg)
Standard grounding
wire (mm2 * m)
E-6
AC
22 500 5.5~2006~19 4.5 14*12
SE-23
AC 154 Telescopic3 sections*
4300
60~15208~60 3.2
22*8
EF-1
22~77
Telescopic2 sections*
2000 22*610
1.722*24
DC 1.5 60*8
EF-5 3.8
B-6
AC 275
1500*4
50~33060~76
5
22*8
BP-1 400 2.2 14*2 DC 1.5 60*8
E-26
AC 275
2000*3 60~15208~60 5
22*8
N-5Z
AC 154 Telescopic4 sections*
55004.5
22*8
DC 1.5 60*8 DC 1.5 60*8
31
BLUE STRIPE® Telescopic Hot Sticks
Utility Solutions BLUE STRIPE® Telescopic Hot Sticks are the strongest, lightest sticks on the market, able to withstand the rigors of daily use and misuse without sacrificing lightweight portability.
BLUE STRIPE® Shotgun SticksReplaceable shotgun hanger hooks are not molded into the head,
making replacement quick and inexpensive if necessary.
Small Conductor Cleaning BrushThe Utility Solutions Conductor Cleaner Clamp offers optimum
conductor cleaning prior to infield grounding and jumping connections.
Elbow-Mule™The Elbow-Mule™ is a standard insulated shotgun stick
attachment designed to remove stubborn seized elbows without applying destructive and dangerous kinetic impact force.
LOAD-RANGER® XLT Load Break Tool
Weighing under 5 pounds, the XLT line of Load Break Tools are by far the lightest portable load break tools available in the world. The lighter the better for optimum tool control and minimal operator fatigue. SAFE. EASY. OPTIONS
Conductor Cleaning BrushThe unique design of the Conductor Cleaning Brush allows full 360 degree
cleaning and remote operation with the use of an insulated shotgun stick.
BREAK-SAFE® 600 Load Break & Pick-up Tool
This tool features durable electrical grade fiberglass housings and a glove friendly design.
32
Jumper-TThe Jumper-T tool series eliminates the need for purchasing bulky
lengths of extra long jumper cables by allowing a lineman to combine shorter sections of jumper cable. You can also use the Jumper-T with a BREAK-SAFE® tool to create a visible gap.
Rescue HookThe Utility Solutions Rescue Hook is an invaluable tool to assist in the
removal of an injured worker from a hazardous area (near electrical gear, vaults, confined spaces etc)
Insulated Rubber BlanketsUtility Solutions blankets meet or exceed all
applicable ASTM D-1048 performance criteria.
BLUE STRIPE® General Purpose Cleaner
We have created a specially formulated neutral cleaner for tools, trucks, fiberglass, painted surfaces, rubber goods and most any non-absorbing surface
.
BLUE STRIPE® Hot Stick Wax
Our high grade Carnauba wax creates a high temperature, water resistant durable finish on fiberglass, gelcoat, painted metal and wood surfaces.
BLUE STRIPE® Wipes
Our daily hot sticks wipes are pre-moistened with silicone to leave behind a thin protective water repellent surface.
BLUE STRIPE® Discharge Hook
The Utility Solutions BLUE STRIPE® Discharge Hook safely eliminates a static charge after de-energizing.
33
Ariadna IF3 FeederLV phase identifier
This equipment has been designed to identify on live networks the link between Low Voltage (LV) customers and MV/LV transformer and phase. • Works in service networks, without de-energizing the line. • Three phases can be identified in few seconds.
• Central Device and Line Device communicate with each other by means of coded messages through the distribution network. This way the use of radio or other communication extra equipment is avoided.
• A single operator can easily use it. • Operational for all kind of Low Voltage network configurations, up to 440 V
between phases, 50 or 60 Hz.
Ariadna ILF6 LV FeederLive phase and feeder identifier• Works on live networks, without de-energizing the line • Three phases and up to 6 feeders can be identified in few seconds • Proved efficiency in lines of more than 1 km • Central and Line Unit communicate with each other by means of
coded messages through the distribution network. This way the use of radio or other communication extra equipment is avoided
• Usable by a single operator • Operational for all kinds of Low Voltage network configurations, up to 480 V between
phases, 50 or 60 Hz, with coupled and/or ringed lines• “Plug and Play”. Contains what is needed to start working, without any additional
adjustment or programming
Ariadna ILF12 FeederLive phase and feeder identifier
• Works in service, without de-energizing the line. • Three phases and up to 12 feeders can be identified in few
seconds. • Proved efficiency on line distances greater than 1 km. • Central and Line Unit communicate with each other by means
of coded messages through the distribution network. This way the use of radio or other communication extra equipment is avoided.
• Operational for all kind of Low Voltage network configurations, Delta, Triangle (no neutral) and up to 440 Vac between phases, 50 or 60 Hz, with coupled and/or ringed feeders.
• A single operator can easily use it.
34
MRT700Live phase and feeder identifier
Locate Underground Power Cables and Pipes quickly and accurately. Energized and de-energized MV and LV Cables.
• 10W Output power selectable by user• 7 Sensors• High precision (less than 10 cm in
three axes)• Lengths over 10 kms• More than 5 meters deep• Target line with direction change
orientation• 3 active frequencies (640Hz - 8KHz -
32KHz• 50/60Hz passive frequency (no
transmitter needed)• 15-27KHz Radio band passive
frequencies
• 8 - 32KHz passive sonde frequencies• Current direction• Automatic depth and current
measurement• Bluetooth connection with compatible
external GPS devices• Built-in GPS with accuracy <2 m• Operation modes (Full - Max - Peak -
Null)• Operating timer longer than 10h• Operating Temperature -20ºC / +55ºC• IP54 protection• Weight 1,5 kgs
Ariadna CIMV & LV cable identifier
The ARIADNA CI is an advanced digital tool, with a simple and effective usage procedure. It enables electrical cables to be identified, energised or not, between a set of conductors in places such as: manholes, ditches, enclosures, etc.
3636
PTC 8320EClose Link Type 3 Phase Test Bench
• Close-link and ordinary calibration both can be used, ordinary calibration can be used to test single / three phase active and reactive energy meter (up to 0.5 class), close-link calibration can be used to test single/three phase active and reactive energy meter (up to 1 class).
• The bench can test the converted quantity which is caused by negative phase, voltage unbalance, harmonic wave and so on.
• The bench is using the HC 3100 standard power meter with comparison technology to offer the test the error of energy meters.
• The bench is using the error processor system to calculate the error of each energy meter by the sub-error system which can be connected by the internal RS485.
HC 5300Precision AC & DC Power Calibration Standards
Our three phase synthesized HC 5300 is able to simulate broad variations of three phase 3 wires and 4 wires networks. These 3 phase power outputs with fully adjustable ranges are highly accurate and suitable for laboratory and field applications. With Typical Accuracy as follows:
• 0.001% for Frequency
• 0.003% reading for Voltage, Current
• 0.008% reading for Watts, Vars, Power Factor, WH, VarH
• Phase Angle setting resolution 0.001o
• Temperature Coefficient 3ppm per degree C
HC 3600Precision AC Power working standards
The standards HC3600C is designed to meet precision test for electrical power and energy measurement in metering and calibration systems. The conversions of the standards of wide auto-ranging inputs enable evaluating the quantities and parameters for three phases and single phase systems.
The input conversion of the standards is based on 24 bits AD in front end to digitalize/ format input signals and acquires the required Sequences and Parameters through FFT transformation by back up
37
PDetector Online Insulation Testing - PD Testing for Substations
PDetector is the ideal partner for condition-based maintenance programs. Online partial discharge testing is a method of inspecting the insulation of electric power systems while equipment remains energized and in service. PDetector incorporates all 5 types of online PD sensor technology. Information from multiple sensors gives PDetector the versatility to detect all types of PD in all types of substation apparatus. Furthermore, the exact type of PD activity can be determined using PRPS: void, corona, surface, particle, or floating electrode.
Applications:
• Power Cables
• Transformers
• GIS
• Switchgear
• Substation Apparatus
PDiagnostic SeriesPortable Partial Discharge Diagnostic Systems
The PDiagnostic is a portable system that utilizes Ultra-High Frequency (UHF), Acoustic Emissions (AE), High-Frequency Current Transformer (HFCT), and Transient Earth Voltage (TEV) sensors to detect, analyze, and locate the PD signals in real time for a multitude of medium and high voltage electric power equipment.
The multi-channel PDiagnostic system locates PD on power equipment down to the measurement of a meter by utilizing Acoustic-Electromagnetic Combination Location Technique, Time Difference of Signals’ Arrival (TDOA), Partial Discharge Signals Separation (POSS), and 30 Positioning Technology with PC software included.
The system features advanced PD diagnostic, automatic PD type pattern recognition, and accurate PD Location capabilities. The PDiagnostic is an ideal trouble-shooting tool for your PD programs. Severity is determined and maintenance suggestions are provided accordingly.
38
PDMonitor Series Online Partial Discharge Monitoring Systems
Continuous Online Insulation Testing for high voltage power systems. PMDT Monitor Systems represent a revolution in electric power testing. PMDT sensors and instrumentation provide the level of detail which is required for effective and effiecient diagnosis of insulation problems.
Modern PD Monitoring incorporates both acoustic and electromagnetic sensors[ UHF HFCT and TEV ]. Fiber optic, 3G wireless or ‘braodband over copper’ options. Diagnostic server units provide continuous access to data and reports from an entire network of PD sensors.
PDStarOnline Insulation Testing - PD Testing for Substations
PDStar is the ideal tool for condition-based maintenance programs. Online partial discharge testing is a method of inspecting the insulation of electric power systems while equipment remains energized and in service. PDetector incorporates all 5 types of online PD sensor technology. Information from multiple sensors gives PDetector the versatility to detect all types of PD in all types of substation apparatus. Furthermore, the exact type of PD activity can be determined using PRPS: void, corona, surface, particle, or floating electrode. Infrared Technology has been applied with PD technology together by PDStar.
3939
Fiberglass Ladder • D shape rung for convenient step High voltage withstand
up to 450kV per 1.8m fo 1 minute. No flashover and breakdown
• Easy use with soft nylon rope complete with smooth operating pulley design
• Anti-skid stopper to prevent bursting when upper ladder declines
• High mechanical resistance to bending and twisting
Tree Trimmer Tools • Zinc painting, diameter 16mm, 4m full length
• Nylon rope with plastic pulley handle
• Fiberglass poles
• Strong aluminum
• Ground universal pull cut saw blade
• Strong ABS plastic connector
Temporary Grounding Set • 1 steel grounding pin, with Zinc painting, diameter
16mm, 1.5m length
• 1 earth clamp
• Storage canvas bag
40
TD-03 Telescopic Hot Stick • For opening and closing disconnect switches.
• Replacing fuses on transformers.
• Universal head and disconnect hook.
• Lockable Sections.
TD-05 Combination and Measuring Stick • Open and close switches, disconnects, line fuses, cut
outs, ects.
• Marking are printed in large easy to read numbers.
• Metric models are in meters and decimetres.
• Lockable Sections.
TD-40SS Safety Shoes• Electrical Resistant
• Hydrostop
• Oil & Fats Resistant
• Abrasion Resistant
• Slip Resistant
• Chemical Resistant
• Waterproof
• Confident in Textile
41
Bete Electrical Construction ToolsHCT-12042Hand hydraulic crimping tool • C-head with 42mm opening width, easy
assembly, suitable for crimping sleeves
• Built in safety valve, automatic pressure-relief at Max. pressure
• Crimping head rotates 360°, suitable for different angle
ECT-12042Battery Powered Crimping Tool
• C-head with 42mm opening width, easy connector pick & place, suitable for crimping sleeves
• Built in safety valve, automatic pressure-relief at Max. pressure
• Built-in micro chip controller, more crimping times with one time charge, protect the device body
• Crimping head rotates 360°, suitable for different angle
• High power capacity, high performance 18V Li-ion battery, with quick charger
PCS-12042Hydraulic Crimping Head
• Crimp cable terminal, c-clamp, connector and overhead line, tight with no fall off
• C-head for easy dies sleeve pick & place
• Rotate 360°, suitable for narrow working space
• Quick coupler for easy disassembly
• Powered by single acting hydraulic pump
• Optionla Accessories: C-clamp die: 35-95 mm2, cutting dies
42
HC-55Hand Hydraulic Cutting Tool • Two stage hydraulics, automatic pressure
relief at max. pressure
• Fast cutting, light weight, easier for cutting
• Flip top style, rotates 360o
• Hand release button, release during the operation with quick retraction
ECT-55Battery Powered Cutting Tool • Two stage hydraulics, automatic pressure
relief at max. pressure
• Fast cutting, light weight, easier for cutting
• Flip top style, rotates 360o
• Built in Microchip controller, more cutting works with single charge, body device protector
• High power capacity, high performance 18V Li-ion battery with fast charger
• LED light for dark environment
PC-105Hydraulic Cutting Head • Flip top style, with quick coupler, easy
operation
• Cutting head rotates 360o
• With handle for easier operation
• Powered by single acting hydraulic pump
43
Chain Hoist and Ratchet Puller
• Applied to tighten cables in power line construction, adjust sag, pull wire and other work • Widely used in electric power, shipbuilding, transportation, construction, mineral, post and
telecommunications, and communications. • Lifting small items, part drawing, etc., especially in small workplaces, wild, aerial work and
different angles traction, etc., it has the unique superiority. • Main body uses high strength magnesium alloy. • The chain is made of high strength alloy steel, can be customize different length. Safe and
reliable; Reasonable structure, beautiful appearance, simple maintenance and durable. • The hand force is small, high work efficiency. • Small size, light weight, easy to carry.
Mini Crawler Crane • It adapts to any geographical environment,
extreme weather, particularly suitable for relief and rescue
• It is widely used in such engineering construction and repairs as power, railway, metro, highway, curtain wall, indoor steel and so on, more suitable for large-scale material storage, large-scale manufacturing and other industries
• Operate by wireless remote control or fuselage switch, safer and reliable operating and faster speed
• Mini design, small size and strong lifting capacity. It ends the era when only labors work in narrow working space, which improve the working efficiency and ensure the safety.
44
HPG-700Double Action Gasoline Engine Pump
• Large oil capacity, suitable for large capacity crimping tools and longtime operation without engine overheating
• High and low double-speed automatic switch, well fit for 60t 100t 200t 300t crimping tools
• Rated output pressure 70Mpa, maximum up to 90Mpa
• Retract pressure protection system & overflow protection valve, safe and reliable
• Simple structure, easy operation, light weight
• Low noise, environment friendly
• Equipped with pressure gauge for pressure reading
HPG-700Double Action Gasoline Engine Pump • Two stage hydraulic system design, high
flow and pressure
• Pressure can be set according to actual need
• The body is made of high strength and light metal, high strength and enhanced engineering plastics
• Internal over pressure safety valve to ensure safety
• While using, please turn the oil cover to “on”, then “off” after working
45
Tanbos XHKJ-1000Overhead Line Fault Location System
XHKJ-1000 is a portable device, which can apply to overhead line small current grounding power system. It is use to pinpoint the earth fault when line break down when single phase grounding fault happen. The kit includes transmitter, senor and receiver and the accessories.
Tanbos ST-10Railway Signal Cable Fault Tester
The railway signal cable fault tester is high-tech product, which uses modern micro-electronic technology with pulse reflection method and intelligent bridge method for pinpointing railway signal cable, local cable, plastic cable , users wire breakage, mixed lines , short circuit , high or low resistance grounding fault with poor insulation and poor contact . It is effective tool to reduce troubleshooting time and labor intensity to improve efficiency .
Tanbos BS60/ 500DC With stand Voltage and Constant Current Burnt Through Power
Applicable to DC withstand voltage test for HV electrical equipment, especially in burn through for power cable high resistance fault point to reduce the resistance of fault point, also using in withstand voltage test of cable, capacitor, dynamo, chinaware.
Tanbos Smart 2000Portable Power Bank
Smart 2000 is a multifunctional portable AC/DC emergency mobile power supply unit. It has a safe power lithium-ion battery and high-efficiency SPWM inverter conversion technology. It has the functions of light weight, high capacity and high power. “. It can provide you with convenient mobile power solutions, which are widely used in mobile office, medical rescue, fire emergency rescue, power equipment repair, environmental protection, emergency communication support, and power storage backup.
46
Ti480 PROInfrared Cameras • More intuitive visual interface, improved,
user-tested, touch screen interface
• Easier to visualize and diagnose issues with sharper on-screen images, multiple rectangle markers and 9 color palettes
• Save time by wirelessly syncing images directly from your camera to the Fluke Connect® system, and attaching them to an asset record or work order
Ti450SF6Gas Leak Detectorand Infrared Camera
• Detects and pinpoints the exact location of the SF6 leak–without shutting down equipment
• Get in-focus images in both infrared and gas modes with a touch of a button with LaserSharp® Auto Focus
• Compatible with smart lenses that require no calibration when swapping them between compatible cameras
• Small and lightweight, fits easily into your tool box
Ti401 PROThermal Camera
• Choose the thermal camera that gives you in-focus images in a matter of seconds. LaserSharp™ Auto Focus uses a built-in laser distance meter that calculates and displays the distance from your designated target and immediately adjusts the focus.
• See small details in the image and discover anomalies faster with 640 x 480 resolution thermal images
• On the thermal camera, adjust the level of infrared and visible light with patented IR-Fusion™ technology
• Manage data, capture multiple measurements (mechanical, electrical and thermal) and organize them by piece of equipment with Fluke Connect™ software
• Simply the best optics to transmit energy and produce high-quality infrared images. Fluke thermal cameras use only 100% diamond-turned germanium lenses with specialty coatings.
47
Fluke ii900Sonic Industrial Imager
• Do more with the same air compressors–delay the capital expense of installing an additional compressor
• Ensure proper air pressure to your pneumatic equipment
• Lower energy costs • Reduce leak detection time • Improve reliability in your production line • Make leak detection part of your typical maintenance
routine • Train the team in a matter of minutes • Validate repairs on the spot
TiX580, TiX560, TiX520 and TiX500Infrared Cameras
• The ergonomic design and neck strap make long inspection days a lot easier
• Get an instant in-focus image of your designated target with LaserSharp® Auto Focus
• Included Fluke Connect® SmartView® desktop software: Optimize thermal images, perform analytics, generate quick, customizable, robust reports and export images to the format of your choice in the cloud
TiX1000, TiX660, TiX640 and TiX620Infrared Cameras
• 10 times the on-camera pixels than standard 320 x 240 cameras (1024 x 768 resolution, 786,432 pixels)
• Work from safer distances–inspect areas that you could not get close to before and still get spectacular, detailed infrared images
• Get a premium in-field viewing experience for quick issue identification with the large 5.6 inch high resolution LCD screen
• Enhanced image quality and temperature measurement accuracy–get 4 times the resolution and pixels than standard mode with SuperResolution (up to 3,145,728 pixels)
Inspire | Innovate | Implement
We specialize in test-instrument repair, PCB repair and provide preventive/corrective maintenance for various electronics, medical, test-instrument & other manufacturing equipments.
Our Strength
ReliabilityWe service major clientele from the public and private sector.We are the authorised service centre for global brands (e.g. Megger - U.K).We have 90% success rate for all repairs.
Lead Time / WarrantyQuotation ready at your disposal within a week.We offer a standard 90 days service warranty.Extended warranty is available upon request
Wide CoverageOur repair capabilities include Variable Speed Drives Repair, Electrical Test-Instrument Repair, PCB Repair Services, Equipment Troubleshooting Services, Marine Electronics Services, Medical Electronics Services, Lab Equipments Services, and Rental Agency of Test Instrument .
AvailabilityExpress service available (Subject to parts availability) On-site services including trouble-shooting & repair after office hours.
Why come to us?
• WearetheapprovedservicecentreforinternationallyrenownedbrandssuchasMegger, SebaKMT, SEAWARD, Phenix Technologies, HVI, Vanguard Instrument, Lenze, BK Precission, ISA, AMTECH, and SKF (Baker Instrument).
• Ifwedonotgetyourequipmentfixed,wedonotchargeyou.
• Wearethetrustedbrandofchoiceinthepublic/privatesectorservingmajorclientelesuchasPT.PLN(Persero),PT.SchneiderElectricIndonesia,PT.TrafindoPrimaPerkasa,PT.UnelecIndonesia(UNINDO),PT.SiemensIndonesia,PT.IndokomasBuanaPerkasa,PT.ELNUSA,Tbk,PT.BambangDjaja,PT.JawaPower,PT.TataJabarSejahtera,PT.ConsolidatedPowerAsia,PT.CirebonElectricPower,PT.JakartaAutomaxSystem,PT.VICOIndonesia.
• Weofferacomprehensiveservicereportaftertherepairsothatyoucantakepreventivemeasuresforservicefailure.
Vanguard Instruments Company, Inc.
Variable Speed Drives Repair
Also Called as VFD or VSD, Type of Inverter for Energy Savings. Used to Drive Motors and Pumps. Used in Lift, Cranes, Conveyors, Automations. We are Capable of Repair and Test In House. Authorized and Trained in:
• Lenze Germany;• AMTECH India.
Electrical Test-Instrument RepairElectrical Test-Instrument Systems usually such as:
• Oil Tester;• Dielectric Test;• Insulation Test;• Cable Fault Testing;• Hi Pot Testing and Safety Test;• Primary Current Injection Test Sets;• Secondary Current Injection Test Sets;• Low Resistance Test Sets;• Circuit Breaker Analysers;• Protection Relay Test System;• Transformer Turn Ratio Test System;• Surge Test System;• Winding Resistance Test Set.
PCB Repair ServicesOur PCB Repair Service is an Unique Process Using State of Art Tools:
• PCB Control Boards Repair;• Obsolete Power Supply Boards Repair.
We are able to source for hard to get components. We are able to read the EEPROM and rewrite. PCB Reworking Services:
• Repair of damaged printed circuit board;• PCB Trace Repair;• BGA Reballing;• PCB Reverse Engineering.
Equipment Troubleshooting ServicesEquipment Troubleshooting Usually On-Site services. We are able to troubleshoot with very little information provided. We are fully equip with troubleshooting instruments.
Marine Electronics ServicesMarine Electronics Services such as:
• Meter Controllers;• Monitoring Winch Controller;• Control PCB for Power Supply;• Boiler Control PCB;• Navigational Controllers;• Touch Panels;• Human Machine Interface (HMI).
Medical Electronics ServicesMedical Electronic Services such as:
• Meter Controllers;• Delsar Life Detector;• Nemoto Dual Shot Alpha;• Radiograph Analyzer.
Lab Equipments ServicesWe maintain and service lab equipment such as:
• Freezer Dryers; • Humidity Chambers; • Thermal Cycler; • Homogenizer; • Incubators.
Rental Agency of Test InstrumentRental Agency such as:
• 10 kV Insulation Resistance Tester• Relay Test System• Circuit Breaker Analyzer• Contact Resistance Tester• CT/VT Analyzer• Cable Fault Locator• Primary Current Injection Test System• Multifunction Transformer and
Substation Test System
All repairs are done In-House and we do not sub out, hence customers will receive first hand information only
PT. Dynamics Circuit IndonesiaJl. P Tubagus Angke No.10 Blok C11Komplek Jelambar CenterGrogol - Petamburan, Jakarta Barat 11460Phone & Fax: +6221 29541370email: [email protected] [email protected]
www.dynamicscircuit.com @dynamics_circuit Dynamics.Circuit.Indonesia
PT. TUNAS DIELEKTRIKA NUSANTARA
Sigit Wisnu DermawanSales [email protected] 8282 954/0878 8588 5874
Agung HaryadiSenior Sales [email protected] 8146 9928
Agus SetiawanSenior Sales [email protected] 3035 8958
PT. DYNAMICS CIRCUIT INDONESIA
Adi Wahyu SetiawanService [email protected] 0888 6600
www.tunasdielektrika.com
tunasdielektrika @tunasdielektrika_nusantara
With our strong determination and efforts of professional team work which driven by self-leadership, we manage to become the trusted distributor in Indonesia. We believe that hard work, loyalty & reliability which results in customers satisfaction will complement our vision to achieve great Indonesian market.
PT. TUNAS DIELEKTRIKA NUSANTARAJl. P Tubagus Angke No. 10 Blok C7 Komplek Jelambar Center
Grogol - Petamburan, Jakarta Barat 11460, IndonesiaPhone: +62-21-5668266 Fax: +62-21-5640755 email: [email protected]
www.tunasdielektrika.com
TUNASDIELEKTRIKANUSANTARA
Inspire | Innovate | Implement