tubular - by turftubular can be tiled on a flat wall vertically, horizontally, or to suit your own...
TRANSCRIPT
PAGE 1
TUBULARcarved wall tile
PATENT PENDING
Tubular—for when design throws you a curve. Vertical channels carved into the surface of Tubular allow the tile to wrap a radius. Made from sound absorbing PET felt, the carved wall tile is available in a single color (9 mm) or in two-tone styles (12 mm).
turf.design 844 TURF OMG TUBULAR PATENT PENDING PAGE 2
SPECSPRODUCTTubular carved wall tile
CONTENTpolyester (PET) felt60% pre-consumer recycled
BEVELED EDGEcarved at a 45˚angle on vertical sides
9MM TILEDIMENSIONS11.75" W x 11.75" H x 9 mm T (small)23.5" W x 23.5" H x 9 mm T (large)*
FELT THICKNESS9 mm (base)
12MM TILEDIMENSIONS11.75" W x 11.75" H x 12 mm T (small)23.5" W x 23.5" H x 12 mm T (large)*
FELT THICKNESS9 mm (base) + 3 mm (top)
*Large tile carving pattern has the same scale as small tile carving pattern.
FRONT VIEW
H
W
12" OR LARGER DIAMETERLAYOUT
Tubular can be tiled on a flat wall vertically, horizontally, or to suit your own creative explorations.
This tile can flex to match a cylindrical or curved surface down to 12" in diameter.
FLAT WRAPPED
T
BASE COLOR
TOP COLOR
BASE COLOR
SIDE VIEWenlarged bottom edge
07 BLACK
01 CREAM
78 WHEAT
70 AQUA
20 MANGO
94 CORAL
06 CHARCOAL
50 IVORY
82 BARLEY
90 SKY
62 SUNFLOWER
42 ORANGE
38 MATTE GREY
05 WHITE
54 LATTE
25 LIGHT BLUE
45 YELLOW
16 RED
86 SLATE
66 PEWTER
48 LIGHT BROWN
74 DENIM
47 LIME
58 RASPBERRY
98 STORM
04 LIGHT GREY
32 BROWN
29 DARK BLUE
14 GREEN
39 LAVENDER
9MM FELTTURF’s Tubular carved wall tile is made with 9mm PET felt board. The process used to create PET felt often results in a heathered effect where multiple tones are present. Slight variations in color should be expected when using this sustainable material.
Felt thickness is 9mm +/- 0.5 mm.
Monitors and printers vary. Please request a material sample to verify felt colors.
turf.design 844 TURF OMG TUBULAR PATENT PENDING PAGE 3
3MM FELTIn addition to the 9mm boards we can also integrate 3mm PET fabric into the products through lamination. The layered material enhances not only the acoustic performance, but allows for color combinations and color reveals.
Monitors and printers vary. Please request a material sample to verify felt colors.
R03 LIGHT GREY
R07 MARIGOLDR09 BISQUE
R28 MIDNIGHT
R19 BLUE
R11 BLACK
R22 TEAL
R01 WHITE
R02 DARK GREY
R13 PARCHMENT
R25 FLINT
R20 TAN
PAGE 4 turf.design 844 TURF OMG TUBULAR PATENT PENDING
turf.design 844 TURF OMG TUBULAR PATENT PENDING
TECHACOUSTICSASTM C423-17: Type A Mounting
FIRE RATINGASTM E-84 – Class A
VOCASTM D5116 Compliant
ASTM C423-17: Type A Mounting. Carved wall tile NRC varies depending on field conditions and arrangement. Contact TURF for testing details.
1.08
0.96
0.84
0.72
0.60
0.48
0.36
0.12
0.24
4000 Hz2000 Hz1000 Hz500 Hz250 Hz125 Hz
FREQUENCY
SO
UN
D A
BS
OR
BT
ION
CO
EF
FIC
IEN
T
12MM TILE: NRC = 0.359MM TILE: NRC = 0.25
DETAILSLEAD TIMEships in four (4) weeks
INSTALLATIONTubular is available with or without an adhesive backing, although the backing is required for installations on curved surfaces. More information is available in the carved wall tile installation instructions.
WARRANTYthree (3) years
MAINTENANCEVacuum occasionally to remove any particulate matter and air-borne debris or dust. Compressed air can be used to dust the material in difficult to reach areas for large assemblies. Use standard household cleaners for spot cleaning.
CUSTOMTubular carved wall tiles may be customized with additional layers and colors. Contact your rep for details.
A manufacturer-applied adhesive backing is required for curved walls. The pressure-activated backing instantly adheres to a variety of wall surfaces.
Carved wall tiles without an adhesive backing should be installed on flat surfaces only with a construction-grade adhesive specified by the contractor.
ADHESIVE BACKING CONSTRUCTION ADHESIVE
PAGE 5