TUBE ANTENNASTRI-SECTOR

88 | April 2015

TRIOSeries

TRIO

April 2015 | 89

Three-Sector antennas inside a small, low visual impact cylindrical enclosure. Discretely deployed as flag poles, roof-top vents, street lamps or telephone poles.

790-960 / 1710-2170 / 1710-2170 / 1710-2690 MHz

68901036890103A 6890103G

• Quad band, Tri-sector antenna, dual polarisation, 8 connectors per sector • Independent tilt on each band 0-10° / 0-12° / 0-12° / 0-10°• Independent azimuth panning ±15° on each sector • MET and RET versions, AISG1.1 or 3GPP/AISG2.0

Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.

Presentation

The 6890103 is a Tri-Sector system that contains three Quad Band antennas installed at 120° in a cylindrical shroud with ±15° azimuth panning capability independent on each sector. A service area at the bottom can be opened for access to connectors and the manual adjustment of the electrical downtilt and azimuth panning. Variants can be delivered with only one or two sectors fitted. See below for ordering details.

Ordering Options Three Sectors Two Sectors One Sector

Manual Electrical Tilt 6890103 6890102 6890101

Remote Electrical Tilt AISG1.1 6890103A 6890102A 6890101A

Remote Electrical Tilt 3GPP/AISG2.0 6890103G 6890102G 6890101G

Access Ports Description (Connectors)

Each sector has 8 colour-coded connectors located at the bottom face.

RED Rings Extended Low Band 790-960 MHz Ports (2x) 7/16-DIN Female Long Neck

WHITE Rings Wide Band (Top Array) 1710-2170 MHz Ports (2x) 7/16-DIN Female Ultra Long Neck

BLUE Rings Wide Band (Bottom Array) 1710-2170 MHz Ports (2x) 7/16-DIN Female Ultra Long Neck

YELLOW Rings Ultra Wide Band 1710-2690 MHz Ports (2x) 7/16-DIN Female Long Neck

Electrical Characteristics Low Band (RED) Wide Band (BLUE) Ultra Wide Band (YELLOW)

Frequency Bands (MHz) 790...880...960 1710...1880 1900...2170 1710...1880 1900...2170 2500...2690

Gain (dBi)Tilt 0°Tilt Mid ValueTilt Max Value

16.5...17.0...17.516.5...17.0...17.516.4...16.9...17.4

16.5...16.916.4...16.716.3...16.5

16.9...17.316.7...17.216.5...17.0

17.6...17.917.5...17.717.5...17.6

17.9...18.417.7...18.217.6...18.0

18.3...18.618.0...18.217.7...17.8

Input Impedance 50Ω 50Ω 50Ω

VSWR < 1.5 < 1.5 < 1.5

Polarisation ±45° ±45° ±45°

Horizontal Beamwidth (-3 dB) 66° (±6°) 67° (±3°) 64° (±4°) 67° (±3°) 64° (±4°) 60° (±3°)

Vertical Beamwidth (-3 dB) 7.3° 7.2° 6.7° 5.5° 5.0° 4.0°

Electrical Downtilt Range 0-10° 0-12° 0-10°

Intra Band Isolation> 30 dB,

> 28 dB from 0° to 2° tilt

> 30 dB > 28 dB from 0° to 2° tilt

> 30 dB> 28 dB from 0° to 2° tilt

Isolation Between Bands > 30 dB > 30 dB > 30 dB

Upper Sidelobe Rejection(20° sector above main beam)

18 dB Typical 18 dB Typical 18 dB Typical

Front-to-Back Ratio > 30 dB > 30 dB > 30 dB

Maximum Power (Per Port) 200 W 160 W 160 W

Intermodulation3rd Order for 2x20W Carriers

< -110 dBm < -110 dBm < -110 dBm

Electrical Downtilt Control

Electrical downtilt for each band can be controlled separately. Tilt indicator(s) are covered by removable transparent cap(s).

Manual Electrical Tilt (MET) Control

A coloured knob at the end of the tilt indicator allows change of the tilt without need of a tool. The knob colour is identical to the corresponding connector ring colour. To access the knob, remove the cap by turning it counter-clockwise. It is re-installed by opposite rotation. Do not remove the transparent cap(s) from the antenna.

Remote Electrical Tilt (RET) Control

The remote control of the electrical tilt is managed by a Multi-Device Control Unit (MDCU) inserted in the bottom of the antenna. A single actuator individually controls the tilt of each band (no need for daisy chain cables between the bands). This module does not add any additional length to the antenna. For RET control, the transparent caps must be in place and locked. The tilt angle indicators always remain visible and the antenna still has manual tilt control (manual override).

RET Module Part Number(one per sector)

MDCU-A0000 for AISG1.1 protocol (three units included in 6890103A)

MDCU-G0000 for 3GPP/AISG2.0 protocol (three units included in 6890103G)

Environmental

Operating Temperature Range -40° C to +60° C

Environmental ETS 300 019

RoHS Compliant Yes

Quad Band | Tri-Sector Antenna | XXXX-Pol | 65° / 65° / 65° / 65° | 17.5 / 17.3 / 17.3 / 18.6 dBi | Variable Tilt

TRIOSeries

90 | April 2015

Mechanical Characteristics

Dimensions (Total Height x Diameter) 3108 x 573 mm (Total height includes 394 mm Service Area, Effective antenna height is 2676 mm)

Relative Directions of Internal Antennas (Sector Axis) 0° (±15°) 120° (±15°) 240° (±15°)

Weight Three Sectors: 190 kg Two Sectors: 153 kg One Sector: 116 kg

Shroud Outdoor Plastic, Grey RAL7035

Wind Speed Operational: 160 km/hr Survival: 200 km/h

Wind load at 160 km/h 1055 N

790-960 / 1710-2170 / 1710-2170 / 1710-2690 MHz

68901036890103A 6890103G

Quad Band | Tri-Sector Antenna | XXXX-Pol | 65° / 65° / 65° / 65° | 17.5 / 17.3 / 17.3 / 18.6 dBi | Variable Tilt

Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.

Bottom View of Antenna (View Inside Service Area) Dimensions (in mm)

Mounting Flange Interface

TRIO Extension

A TRIO Extension is a short mounting (0.85 m) mast which has the same diameter, same outside material and same colour as the antenna. The two major advantages of the extensions are getting the antenna higher and housing our TMA.

Dimensions (Height x Diameter) 850 x 573 mm

Weight 66 kg

Shroud Outdoor Plastic, Grey RAL7035

Flange Galvanised Steel

Wind Speed Operational: 160 km/h Survival: 200 km/h

Refer to the separate documentation on TRIO Extensions for more details.

Six curved slots 18 mm wideon a 500 mm diameter circle

April 2015 | 91

880-960 / 1710-2170 / 1710-2170 MHz

58809035880803 5880803G

• Tri band, Tri-sector antenna, dual polarisation, 6 connectors per sector • Independent tilt on each band 0-10° / 0-12° / 0-12°• Independent azimuth panning ±15° on each sector • MET and RET versions, AISG1.1 or 3GPP/AISG2.0

Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.

Presentation

The 5880903 is a Tri-Sector system that contains three Tri Band antennas installed at 120° in a cylindrical shroud with ±15° azimuth panning capability independent on each sector. A service area at the bottom can be opened for access to connectors and the manual adjustment of the electrical downtilt and azimuth panning. Variants can be delivered with only one or two sectors fitted. See below for ordering details.

Ordering Options Three Sectors Two Sectors One Sector

Manual Electrical Tilt 5880903 5880902 5880901

Remote Electrical Tilt AISG1.1 5880803 5880802 5880801

Remote Electrical Tilt 3GPP/AISG2.0 5880803G 5880802G 5880801G

Access Ports Description (Connectors)

Each sector has 6 colour-coded connectors located at the bottom face.

RED Rings Low Band 880-960 MHz Ports (2x) 7/16-DIN Female Long Neck

WHITE Rings High Band (Top Array) 1710-2170 MHz PortsPattern optimised for DCS1800 (2x) 7/16-DIN Female Ultra Long Neck

BLUE Rings High Band (Bottom Array) 1710-2170 MHz PortsPattern optimised for UMTS2100 (2x) 7/16-DIN Female Long Neck

Electrical Characteristics Low Band (RED) High Band (WHITE) High Band (BLUE)

Frequency Bands (MHz) 880...960 1710...1880 1900...2170 1710...1880 1900...2170

Gain (dBi)Tilt 0°Tilt Mid ValueTilt Max Value

17.0...17.5 dBi17.0...17.5 dBi16.9...17.4 dBi

16.5...16.716.3...16.516.0...16.3

16.7...17.216.5...17.016.3...16.5

16.5...16.916.4...16.716.3...16.5

16.9...17.316.7...17.216.5...17.0

Input Impedance 50Ω 50Ω 50Ω

VSWR < 1.5 < 1.5 < 1.5

Polarisation ±45° ±45° ±45°

Horizontal Beamwidth (-3 dB) 65° 65° 62° 65° 62°

Vertical Beamwidth (-3 dB) 7° 7° 7° 7° 7°

Electrical Downtilt Range 0-10° 0-12° 0-12°

Isolation Between Ports > 30 dB > 30 dB > 30 dB

Isolation Between Bands 45 dB Typical 45 dB Typical 45 dB Typical

Upper Sidelobe Rejection(20° sector above main beam)

18 dB Typical 18 dB Typical 18 dB Typical

Front-to-Back Ratio > 30 dB > 30 dB > 30 dB

Maximum Power (Per Port) 200 W 160 W 160 W

Intermodulation3rd Order for 2x20W Carriers

< -110 dBm < -110 dBm < -110 dBm

Electrical Downtilt Control

Electrical downtilt for each band can be controlled separately. Tilt indicator(s) are covered by removable transparent cap(s).

Manual Electrical Tilt (MET) Control

A coloured knob at the end of the tilt indicator allows change of the tilt without need of a tool. The knob colour is identical to the corresponding connector ring colour. To access the knob, remove the cap by turning it counter-clockwise. It is re-installed by opposite rotation. Do not remove the transparent cap(s) from the antenna.

Remote Electrical Tilt (RET) Control

The remote control of the electrical tilt is managed by a Multi-Device Control Unit (MDCU) inserted in the bottom of the antenna. A single actuator individually controls the tilt of each band (no need for daisy chain cables between the bands). This module does not add any additional length to the antenna. For RET control, the transparent caps must be in place and locked. The tilt angle indicators always remain visible and the antenna still has manual tilt control (manual override).

RET Module Part Number(one per sector)

MDCU-A0000 for AISG1.1 protocol (three units included in 5880803)

MDCU-G0000 for 3GPP/AISG2.0 protocol (three units included in 5880803G)

Environmental

Operating Temperature Range -40° C to +60° C

Environmental ETS 300 019

RoHS Compliant Yes

Tri Band | Tri-Sector Antenna | XXX-Pol | 65° / 65° / 65° | 17.5 / 17.2 / 17.3 dBi | Variable Tilt

TRIOSeries

92 | April 2015

Mechanical Characteristics

Dimensions (Total Height x Diameter) 3069 x 388 mm (Total height includes 394 mm Service Area, Effective antenna height is 2676 mm)

Relative Directions of Internal Antennas (Sector Axis) 0° (±15°) 120° (±15°) 240° (±15°)

Weight Three Sectors: 98 kg Two Sectors: 86 kg One Sector: 74 kg

Shroud Outdoor Plastic, Grey RAL7035

Wind Speed Operational: 160 km/hr Survival: 200 km/h

Wind load at 160 km/h 709 N

880-960 / 1710-2170 / 1710-2170 MHz

58809035880803 5880803G

Tri Band | Tri-Sector Antenna | XXX-Pol | 65° / 65° / 65° | 17.5 / 17.2 / 17.3 dBi | Variable Tilt

Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.

Bottom View of Antenna (View Inside Service Area) Dimensions (in mm)

Mounting Flange Interface

TRIO Extension

A TRIO Extension is a short mounting (0.85 m) mast which has the same diameter, same outside material and same colour as the antenna. The two major advantages of the extensions are getting the antenna higher and housing our TMA.

Dimensions (Height x Diameter) 850 x 388 mm

Weight 41.5 kg

Shroud Outdoor Plastic, Grey RAL7035

Flange Galvanised Steel

Wind Speed Operational: 160 km/h Survival: 200 km/h

Refer to the separate documentation on TRIO Extensions for more details.

Six curved slots 11.5 mm wideon a 260 mm diameter circle

April 2015 | 93

698-960 / 1695-2690 / 1695-2180 / 2490-2690 MHz

68883036888303A 6888303G

Quad Band | Tri-Sector Antenna | XXXX-Pol | 65° / 65° / 65° / 65° | 16.5 / 18.5 / 17.5 / 18.0 dBi | Variable Tilt

• Quad band, Tri-Sector antenna, dual polarisation, 8 connectors per sector • Independent tilt on each band 0-10° / 0-10° / 0-10° / 0-10°• Independent azimuth panning ±15° on each sector • MET and RET versions, AISG1.1 or 3GPP/AISG2.0

Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.

Presentation

The 6888303 is a Tri-Sector system that contains three Quad Band antennas installed at 120° in a cylindrical shroud with ±15° azimuth panning capability independent on each sector. A service area at the bottom can be opened for access to connectors and the manual adjustment of the electrical downtilt and azimuth panning. Variants can be delivered with only one or two sectors fitted. See below for ordering details.

Ordering Options Three Sectors Two Sectors One Sector

Manual Electrical Tilt 6888303 6888302 6888301

Remote Electrical Tilt AISG1.1 6888303A 6888302A 6888301A

Remote Electrical Tilt 3GPP/AISG2.0 6888303G 6888302G 6888301G

Access Ports Description (Connectors)

Each sector has 8 colour-coded connectors located at the bottom face.

Ultra Low Band 698-960 MHz Ports (2x) 7/16-DIN Female Long Neck

Ultra Wide Band 1695-2690 MHz Ports (2x) 7/16-DIN Female Ultra Long Neck

Wide Band 1695-2180 MHz Ports (2x) 7/16-DIN Female Ultra Long Neck

2600 2490-2690 MHz Ports (2x) 7/16-DIN Female Long Neck

Electrical Characteristics R1 Y1 B1 Y2

Frequency Bands (MHz) 700 800 900 1800 2100 2600 1800 2100 2600

Gain (dBi)Tilt 0°Tilt 5°Tilt 10°

14.514.514.2

15.515.415.1

16.416.316.0

17.717.717.7

18.118.118.0

18.518.518.2

17.417.417.4

17.717.717.6

18.018.017.7

Input Impedance 50Ω 50Ω 50Ω 50Ω

VSWR < 1.5 < 1.5 < 1.5 < 1.5

Polarisation ±45° ±45° ±45° ±45°

Horizontal Beamwidth (-3 dB) 73° 65° 65° 65° 63° 61° 65° 63° 61°

Vertical Beamwidth (-3 dB) 12° 10° 9.4° 6.1° 5.3° 4.2° 6.1° 5.3° 4.2°

Electrical Downtilt Range 0-10° 0-10° 0-10° 0-10°

Inter/Intra Band Isolation > 30 dB> 28 dB from 0° to 2° tilt

> 30 dB> 28 dB from 0° to 2° tilt

> 30 dB > 28 dB from 0° to 2° tilt

> 30 dB, > 28 dB from

0° to 2° tilt

Upper Sidelobe Rejection(20° sector above main beam)

18 dB Typical 18 dB Typical 18 dB Typical 18 dB Typical

Front-to-Back Ratio

@ 180°@ 180° ±30°

> 30 dB> 25 dB

> 30 dB> 25 dB

> 30 dB> 25 dB

> 30 dB> 25 dB

Maximum Power (Per Port) 250 W 200 W 200 W 200 W

Intermodulation3rd Order for 2x20W Carriers

< -110 dBm < -110 dBm < -110 dBm < -110 dBm

Electrical Downtilt Control

Electrical downtilt for each band can be controlled separately. Tilt indicator(s) are covered by removable transparent cap(s).

Manual Electrical Tilt (MET) Control

A coloured knob at the end of the tilt indicator allows change of the tilt without need of a tool. The knob colour is identical to the corresponding connector ring colour. To access the knob, remove the cap by turning it counter-clockwise. It is re-installed by opposite rotation. Do not remove the transparent cap(s) from the antenna.

Remote Electrical Tilt (RET) Control

The remote control of the electrical tilt is managed by a Multi-Device Control Unit (MDCU) inserted in the bottom of the antenna. A single actuator individually controls the tilt of each band (no need for daisy chain cables between the bands). This module does not add any additional length to the antenna. For RET control, the transparent caps must be in place and locked. The tilt angle indicators always remain visible and the antenna still has manual tilt control (manual override).

RET Module Part Number(one per sector)

MDCU-A0000 for AISG1.1 protocol (three units included in 6888303A)

MDCU-G0000 for 3GPP/AISG2.0 protocol (three units included in 6888303G)

Environmental

Operating Temperature Range -40° C to +60° C

Environmental ETS 300 019

RoHS Compliant Yes

R1

Y1

Y2

B1

TRIOSeries

94 | April 2015

Mechanical Characteristics

Dimensions (Total Height x Diameter) 2325 x 573 mm (Total height includes 394 mm Service Area)

Relative Directions of Internal Antennas (Sector Axis) 0° (±15°) 120° (±15°) 240° (±15°)

Weight Three Sectors: 131 kg Two Sectors: 104 kg One Sector: 77 kg

Shroud Outdoor Plastic, Grey RAL7035

Wind Speed Operational: 160 km/hr Survival: 200 km/h

Wind load at 160 km/h 790 N

698-960 / 1695-2690 / 1695-2180 / 2490-2690 MHz

68883036888303A 6888303G

Quad Band | Tri-Sector Antenna | XXXX-Pol | 65° / 65° / 65° / 65° | 16.5 / 18.5 / 17.5 / 18.0 dBi | Variable Tilt

Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.

Bottom View of Antenna (View Inside Service Area) Dimensions (in mm)

Mounting Flange Interface

TRIO Extension

A TRIO Extension is a short mounting (0.85 m) mast which has the same diameter, same outside material and same colour as the antenna. The two major advantages of the extensions are getting the antenna higher and housing our TMA.

Dimensions (Height x Diameter) 850 x 573 mm

Weight 66 kg

Shroud Outdoor Plastic, Grey RAL7035

Flange Galvanised Steel

Wind Speed Operational: 160 km/h Survival: 200 km/h

Refer to the separate documentation on TRIO Extensions for more details.

Six curved slots 18 mm wideon a 500 mm diameter circle

April 2015 | 95

790-960 / 1710-2170 / 1710-2690 MHz

68782036878203A 6878203G

• Tri band, Tri-sector antenna, dual polarisation, 6 connectors per sector • Independent tilt on each band 0-10° / 0-10° / 0-10°• Independent azimuth panning ±15° on each sector • MET and RET versions, AISG1.1 or 3GPP/AISG2.0

Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.

Presentation

The 6878203 is a Tri-Sector system that contains three Tri Band antennas installed at 120° in a cylindrical shroud with ±15° azimuth panning capability independent on each sector. A service area at the bottom can be opened for access to connectors and the manual adjustment of the electrical downtilt and azimuth panning. Variants can be delivered with only one or two sectors fitted. See below for ordering details.

Ordering Options Three Sectors Two Sectors One Sector

Manual Electrical Tilt 6878203 6878202 6878201

Remote Electrical Tilt AISG1.1 6878203A 6878202A 6878201A

Remote Electrical Tilt 3GPP/AISG2.0 6878203G 6878202G 6878201G

Access Ports Description (Connectors)

Each sector has 6 colour-coded connectors located at the bottom face.

RED Rings Extended Low Band 790-960 MHz Ports (2x) 7/16-DIN Female Long Neck

BLUE Rings Wide Band 1710-2170 MHz Ports (2x) 7/16-DIN Female Ultra Long Neck

YELLOW Rings Ultra Wide Band 1710-2690 MHz Ports (2x) 7/16-DIN Female Ultra Long Neck

Electrical Characteristics Low Band (RED) Wide Band (BLUE) Ultra Wide Band (YELLOW)

Frequency Bands (MHz) 790...880...960 1710...1880 1900...2170 1710...1880 1900...2170 2500...2690

Gain (dBi)Tilt 0°Tilt 5°Tilt 10°

15.5...16.0...16.515.5...16.0...16.515.4...15.9...16.4

17.8...18.217.7...18.017.6...17.8

18.2...18.618.0...18.517.8...18.3

17.6...17.917.5...17.717.5...17.6

17.9...18.417.7...18.217.9...18.0

18.3...18.618.0...18.217.7...17.8

Input Impedance 50Ω 50Ω 50Ω

VSWR < 1.5 < 1.5 < 1.5

Polarisation ±45° ±45° ±45°

Horizontal Beamwidth (-3 dB) 66° (±6°) 67° (±3°) 64° (±4°) 67° (±3°) 64° (±4°) 60° (±3°)

Vertical Beamwidth (-3 dB) 9.0° 5.7° 4.9° 5.5° 5.0° 4.0°

Electrical Downtilt Range 0-10° 0-10° 0-10°

Intra Band Isolation> 30 dB,

> 28 dB from 0° to 2° tilt

> 30 dB, > 28 dB from 0° to 2° tilt > 30 dB, > 28 dB from 0° to 2° tilt

Isolation Between Bands 45 dB Typical 45 dB Typical 45 dB Typical

Upper Sidelobe Rejection(20° sector above main beam)

18 dB Typical 18 dB Typical 18 dB Typical

Front-to-Back Ratio > 30 dB > 30 dB > 30 dB

Maximum Power (Per Port) 200 W 160 W 160 W

Intermodulation3rd Order for 2x20W Carriers

< -110 dBm < -110 dBm < -110 dBm

Electrical Downtilt Control

Electrical downtilt for each band can be controlled separately. Tilt indicator(s) are covered by removable transparent cap(s).

Manual Electrical Tilt (MET) Control

A coloured knob at the end of the tilt indicator allows change of the tilt without need of a tool. The knob colour is identical to the corresponding connector ring colour. To access the knob, remove the cap by turning it counter-clockwise. It is re-installed by opposite rotation. Do not remove the transparent cap(s) from the antenna.

Remote Electrical Tilt (RET) Control

The remote control of the electrical tilt is managed by a Multi-Device Control Unit (MDCU) inserted in the bottom of the antenna. A single actuator individually controls the tilt of each band (no need for daisy chain cables between the bands). This module does not add any additional length to the antenna. For RET control, the transparent caps must be in place and locked. The tilt angle indicators always remain visible and the antenna still has manual tilt control (manual override).

RET Module Part Number(one per sector)

MDCU-A0000 for AISG1.1 protocol (three units included in 6878203A)

MDCU-G0000 for 3GPP/AISG2.0 protocol (three units included in 6878203G)

Environmental

Operating Temperature Range -40° C to +60° C

Environmental ETS 300 019

RoHS Compliant Yes

Tri Band | Tri-Sector Antenna | XXX-Pol | 65° / 65° / 65° | 16.5 / 18.6 / 18.6 dBi | Variable Tilt

TRIOSeries

96 | April 2015

Mechanical Characteristics

Dimensions (Total Height x Diameter) 2325 x 573 mm (Total height includes 394 mm Service Area)

Relative Directions of Internal Antennas (Sector Axis) 0° (±15°) 120° (±15°) 240° (±15°)

Weight Three Sectors: 140 kg Two Sectors: 110 kg One Sector: 80 kg

Shroud Outdoor Plastic, Grey RAL7035

Wind Speed Operational: 160 km/hr Survival: 200 km/h

Wind load at 160 km/h 790 N

790-960 / 1710-2170 / 1710-2690 MHz

68782036878203A 6878203G

Tri Band | Tri-Sector Antenna | XXX-Pol | 65° / 65° / 65° | 16.5 / 18.6 / 18.6 dBi | Variable Tilt

Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.

Bottom View of Antenna (View Inside Service Area) Dimensions (in mm)

Mounting Flange Interface

TRIO Extension

A TRIO Extension is a short mounting (0.85 m) mast which has the same diameter, same outside material and same colour as the antenna. The two major advantages of the extensions are getting the antenna higher and housing our TMA.

Dimensions (Height x Diameter) 850 x 573 mm

Weight 66 kg

Shroud Outdoor Plastic, Grey RAL7035

Flange Galvanised Steel

Wind Speed Operational: 160 km/h Survival: 200 km/h

Refer to the separate documentation on TRIO Extensions for more details.

Six curved slots 18 mm wideon a 500 mm diameter circle

April 2015 | 97

880-960 / 1710-2170 MHz

58639035863803 5863803G

• Dual band, Tri-sector antenna, dual polarisation, 4 connectors per sector • Independent tilt on each band 0-10° / 0-10°• Independent azimuth panning ±15° on each sector • MET and RET versions, AISG1.1 or 3GPP/AISG2.0

Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.

Presentation

The 5863903 is a Tri-Sector system that contains three Dual Band antennas installed at 120° in a cylindrical shroud with ±15° azimuth panning capability independent on each sector. A service area at the bottom can be opened for access to connectors and the manual adjustment of the electrical downtilt and azimuth panning. Variants can be delivered with only one or two sectors fitted. See below for ordering details.

Ordering Options Three Sectors Two Sectors One Sector

Manual Electrical Tilt 5863903 5863902 5863901

Remote Electrical Tilt AISG1.1 5863803 5863802 5863801

Remote Electrical Tilt 3GPP/AISG2.0 5863803G 5863802G 5863801G

Access Ports Description (Connectors)

Each sector has 4 colour-coded connectors located at the bottom face.

RED Rings Low Band 880-960 MHz Ports (2x) 7/16-DIN Female Long Neck

BLUE Rings High Band 1710-2170 MHz Ports (2x) 7/16-DIN Female Long Neck

Electrical Characteristics Low Band (RED) High Band (BLUE)

Frequency Bands (MHz) 880...960 1710...1880 1900...2170

Gain (dBi)Tilt 0°Tilt 5°Tilt 10°

16.0...16.516.0...16.515.9...16.4

17.3...17.617.2...17.416.2...17.3

17.6...18.117.4...17.917.3...17.7

Input Impedance 50Ω 50Ω

VSWR < 1.5 < 1.5

Polarisation ±45° ±45°

Horizontal Beamwidth (-3 dB) 65° 65° 64°

Vertical Beamwidth (-3 dB) 9° 6° 6°

Electrical Downtilt Range 0-10° 0-10°

Isolation Between Ports > 30 dB > 30 dB

Isolation Between Bands 45 dB Typical 45 dB Typical

Upper Sidelobe Rejection(20° sector above main beam)

18 dB Typical 18 dB Typical

Front-to-Back Ratio > 30 dB > 30 dB

Maximum Power (Per Port) 200 W 160 W

Intermodulation3rd Order for 2x20W Carriers

< -110 dBm < -110 dBm

Electrical Downtilt Control

Electrical downtilt for each band can be controlled separately. Tilt indicator(s) are covered by removable transparent cap(s).

Manual Electrical Tilt (MET) Control

A coloured knob at the end of the tilt indicator allows change of the tilt without need of a tool. The knob colour is identical to the corresponding connector ring colour. To access the knob, remove the cap by turning it counter-clockwise. It is re-installed by opposite rotation. Do not remove the transparent cap(s) from the antenna.

Remote Electrical Tilt (RET) Control

The remote control of the electrical tilt is managed by a Multi-Device Control Unit (MDCU) inserted in the bottom of the antenna. A single actuator individually controls the tilt of each band (no need for daisy chain cables between the bands). This module does not add any additional length to the antenna. For RET control, the transparent caps must be in place and locked. The tilt angle indicators always remain visible and the antenna still has manual tilt control (manual override).

RET Module Part Number(one per sector)

MDCU-A0000 for AISG1.1 protocol (three units included in 5863803)

MDCU-G0000 for 3GPP/AISG2.0 protocol (three units included in 5863803G)

Environmental

Operating Temperature Range -40° C to +60° C

Environmental ETS 300 019

RoHS Compliant Yes

Dual Band | Tri-Sector Antenna | XX-Pol | 65° / 65° | 16.5 / 18.0 dBi | Variable Tilt

TRIOSeries

98 | April 2015

Mechanical Characteristics

Dimensions (Total Height x Diameter) 2291 x 388 mm (Total height includes 394 mm Service Area, Effective antenna height is 1900 mm)

Relative Directions of Internal Antennas (Sector Axis) 0° (±15°) 120° (±15°) 240° (±15°)

Weight Three Sectors: 68 kg Two Sectors: 58 kg One Sector: 48 kg

Shroud Outdoor Plastic, Grey RAL7035

Wind Speed Operational: 160 km/hr Survival: 200 km/h

Wind load at 160 km/h 529 N

880-960 / 1710-2170 MHz

58639035863803 5863803G

Tri Band | Tri-Sector Antenna | XXX-Pol | 65° / 65° / 65° | 17.5 / 17.2 / 17.3 dBi | Variable Tilt

Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.

Bottom View of Antenna (View Inside Service Area) Dimensions (in mm)

Mounting Flange Interface

TRIO Extension

A TRIO Extension is a short mounting (0.85 m) mast which has the same diameter, same outside material and same colour as the antenna. The two major advantages of the extensions are getting the antenna higher and housing our TMA.

Dimensions (Height x Diameter) 850 x 388 mm

Weight 41.5 kg

Shroud Outdoor Plastic, Grey RAL7035

Flange Galvanised Steel

Wind Speed Operational: 160 km/h Survival: 200 km/h

Refer to the separate documentation on TRIO Extensions for more details.

Six curved slots 11.5 mm wideon a 260 mm diameter circle

April 2015 | 99

(2x) 1710-2690 MHz

61771036177103A 6177103G

• Twin band, Tri-sector antenna, dual polarisation, 4 connectors per sector • Independent tilt on each band 0-12° / 0-12°• Independent azimuth panning ±15° on each sector • MET and RET versions, AISG1.1 or 3GPP/AISG2.0

Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.

Presentation

The 6177103 is a Tri-Sector system that contains three Twin Band antennas installed at 120° in a cylindrical shroud with ±15° azimuth panning capability independent on each sector. A service area at the bottom can be opened for access to connectors and the manual adjustment of the electrical downtilt and azimuth panning. Variants can be delivered with only one or two sectors fitted. See below for ordering details.

Ordering Options Three Sectors Two Sectors One Sector

Manual Electrical Tilt 6177103 6177102 6177101

Remote Electrical Tilt AISG1.1 6177103A 6177102A 6177101A

Remote Electrical Tilt 3GPP/AISG2.0 6177103G 6177102G 6177101G

Access Ports Description (Connectors)

Each sector has 4 colour-coded connectors located at the bottom face.

Ultra Wide Band 1710-2690 MHz Ports (2x) 7/16-DIN Female Ultra Long Neck

Ultra Wide Band 1710-2690 MHz Ports (2x) 7/16-DIN Female Ultra Long Neck

Electrical Characteristics

Frequency Bands (MHz) 1710...1880...2170...2690 MHz

Gain (dBi) 16.9...17.2...17.6...18.0 dBi

Input Impedance 50Ω

VSWR < 1.5

Polarisation ±45°

Horizontal Beamwidth (-3 dB) 65°

Vertical Beamwidth (-3 dB) 6°

Electrical Downtilt Range 0-12°

Intra Band Isolation > 25 dB

Upper Sidelobe Rejection(20° sector above main beam)

18 dB Typical

Null Fill (First Null Below Main Beam) < 18 dB Typical

Front-to-Back Ratio > 30 dB

Maximum Power (Per Port) 160 W

Intermodulation3rd Order for 2x20W Carriers

< -153 dBc

Electrical Downtilt Control

Electrical downtilt for each band can be controlled separately. Tilt indicator(s) are covered by removable transparent cap(s).

Manual Electrical Tilt (MET) Control

A coloured knob at the end of the tilt indicator allows change of the tilt without need of a tool. The knob colour is identical to the corresponding connector ring colour. To access the knob, remove the cap by turning it counter-clockwise. It is re-installed by opposite rotation. Do not remove the transparent cap(s) from the antenna.

Remote Electrical Tilt (RET) Control

The remote control of the electrical tilt is managed by a Multi-Device Control Unit (MDCU) inserted in the bottom of the antenna. A single actuator individually controls the tilt of each band (no need for daisy chain cables between the bands). This module does not add any additional length to the antenna. For RET control, the transparent caps must be in place and locked. The tilt angle indicators always remain visible and the antenna still has manual tilt control (manual override).

RET Module Part Number(one per sector)

MDCU-A0000 for AISG1.1 protocol (three units included in 6177103A)

MDCU-G0000 for 3GPP/AISG2.0 protocol (three units included in 6177103G)

Environmental

Operating Temperature Range -40° C to +60° C

Environmental ETS 300 019

RoHS Compliant Yes

Twin Band | Tri-Sector Antenna | (2x) X-Pol | 65° | 18.0 dBi | Variable Tilt

Y1

Y2

TRIOSeries

LTE 2600 Rea

dy

100 | April 2015

Mechanical Characteristics

Dimensions (Total Height x Diameter) 1927 x 573 mm (Total height includes 408 mm Service Area)

Relative Directions of Internal Antennas (Sector Axis) 0° (±15°) 120° (±15°) 240° (±15°)

Weight Three Sectors: 103 kg Two Sectors: 89 kg One Sector: 75 kg

Shroud Outdoor Plastic, Grey RAL7035

Wind Speed Operational: 160 km/hr Survival: 200 km/h

Wind load (EN1991-4-1)

at 150 km/h 827 N

at 160 km/h 940 N

(2x) 1710-2690 MHz

61771036177103A 6177103G

Twin Band | Tri-Sector Antenna | (2x) X-Pol | 65° | 18.0 dBi | Variable Tilt

Several patents pending regarding this product. Quoted performance parameters are provided to offer typical, peak or range values only and may vary as a result of normal testing, manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to products may be made without notice.

Bottom View of Antenna Dimensions (in mm)

Mounting Flange Interface

TRIO Extension

A TRIO Extension is a short mounting (0.85 m) mast which has the same diameter, same outside material and same colour as the antenna. The two major advantages of the extensions are getting the antenna higher and housing our TMA.

Dimensions (Height x Diameter) 850 x 573 mm

Weight 66 kg

Shroud Outdoor Plastic, Grey RAL7035

Flange Galvanised Steel

Wind Speed Operational: 160 km/h Survival: 200 km/h

Refer to the separate documentation on TRIO Extensions for more details.

Six curved slots 18 mm wideon a 500 mm diameter circle

View Inside Service Area

Vie

w O

utsi

de

Serv

ice

Are

a

April 2015 | 101