ttiieeÂuÂu cchhuuaaÅnÅn vviieeÄtÄt nnaamm...
TRANSCRIPT
TTHHÖÖ VVIIEEÄÄNN ÑÑAAÏÏII HHOOÏÏCC CCOOÂÂNNGG NNGGHHIIEEÄÄPP TTPP.. HHCCMM
--------------------
TTRRÍÍCCHH BBAAÙÙOO TTAAÏÏPP CCHHÍÍ
KKHHOOAA HHOOÏÏCC && CCOOÂÂNNGG NNGGHHEEÄÄ
TTIIEEÂÂUU CCHHUUAAÅÅNN
VVIIEEÄÄTT NNAAMM && TTHHEEÁÁ GGIIÔÔÙÙII
TTHHAAÙÙNNGG 0088//22000099
hhttttpp::////lliibb..hhuuii..eedduu..vvnn
2
Tiêu chuẩn Anh - BS
TT Số hiệu
Tiêu chuẩn Tên tiêu chuẩn
1 BS ISO 26362:2009 Access panels in market, opinion and social research.
Vocabulary and service requirements.
2
BS EN ISO 1683:2008
Thay thế:
BS EN 21683:1994
Acoustics. Preferred reference values for acoustical and
vibratory levels.
3
BS EN 1465:2009
Thay thế:
BS EN 1465:1995
Adhesives. Determination of tensile lap-shear strength of
bonded assemblies.
4 BS ISO 27996:2009 Aerospace fluid systems. Elastomer seals. Storage and
shelf life.
5 BS EN 3660-019:2009
Aerospace series. Cable outlet accessories for circular
and rectangular electrical and optical connectors. Cable
outlet, style A, 45<deg>, unsealed, with cable tie strain
relief. Product standard.
6 BS EN 3660-025:2009
Aerospace series. Cable outlet accessories for circular
and rectangular electrical and optical connectors. Cable
outlet, style A, straight, unsealed, with cable tie strain
relief for EN 3646. Product standard.
7 BS EN 3660-026:2009
Aerospace series. Cable outlet accessories for circular
and rectangular electrical and optical connectors. Cable
outlet, style A, 90<deg>, unsealed, with cable tie strain
relief for EN 3646. Product standard.
8 BS EN 3660-027:2009
Aerospace series. Cable outlet accessories for circular
and rectangular electrical and optical connectors. Cable
outlet, style A, 45<deg>, unsealed, with cable tie strain
relief for EN 3646. Product standard.
9 BS EN 3375-009:2009
Aerospace series. Cable, electrical, for digital data
transmission. Single braid. CAN Bus. 120 Ohms. Type
WX. Product standard.
10 BS EN 4604-003:2009
Aerospace series. Cable, electrical, for signal
transmission. Cable, coaxial, 50 ohm, 200 <deg>C, type
WZ. Product standard.
11 BS EN 4604-006:2009
Aerospace series. Cable, electrical, for signal
transmission. Cable, coaxial, 50 ohm, 200 <deg>C, type
WM. Product standard.
12 BS EN 2854-003:2009
Aerospace series. Cables, electrical for general purpose.
Cross sections equal to and greater than 9 mm<UP>2.
Operating temperatures between -55 <deg>C and 260
<deg>C. Product standard.
13
BS EN 3475-802:2009
Thay thế:
BS EN 3475-802:2002
Aerospace series. Cables, electrical, aircraft use. Test
methods. Capacitance unbalance.
3
14 BS EN 3475-810:2009 Aerospace series. Cables, electrical, aircraft use. Test
methods. Structural return loss.
15 BS EN 2997-012:2009
Aerospace series. Connectors, electrical, circular,
coupled by threaded ring, fire-resistant or non fire-
resistant, operating temperatures -65 <deg>C to 175
<deg>C continuous, 200 <deg>C continuous, 260
<deg>C peak. Jam-nut for jam-nut receptacles. Product
standard.
16 BS EN 2997-013:2009
Aerospace series. Connectors, electrical, circular,
coupled by threaded ring, fire-resistant or non fire-
resistant, operating temperatures -65 <deg>C to 175
<deg>C continuous, 200 <deg>C continuous, 260
<deg>C peak. O-ring seal for jam-nut receptacles.
Product standard.
17 BS EN 4626-201:2009
Aerospace series. Connectors, optical, rectangular,
multicontact, rack and panel, Quadrax cavity, 2,5 mm
diameter ferrule. Operating temperatures -65 <deg>C to
125 <deg>C (cable dependent). Flush contacts. Optical
contact (sub-assembly) for receptacle. Product standard.
18 BS EN 3155-001:2009 Aerospace series. Electrical contacts used in elements of
connection. Technical specification.
19 BS EN 3155-067:2009
Aerospace series. Electrical contacts used in elements of
connection. Contacts, electrical, coaxial, size 08, male,
type D, solder, class R. Product standard.
20 BS EN 3155-068:2009
Aerospace series. Electrical contacts used in elements of
connection. Contacts, electrical, coaxial, size 08, female,
type D, solder, class R. Product standard.
21 BS EN 3155-069:2009
Aerospace series. Electrical contacts used in elements of
connection. Contacts, electrical, coaxial, size 16, female,
type D, solder, class P. Product standard.
22 BS EN 3745-514:2009 Aerospace series. Fibres and cables, optical, aircraft use.
Test methods. Cable twist bend.
23 BS EN 3034:2009
Aerospace series. Nuts, self-locking, hexagonal with
captive washer. In heat resisting steel FE-PA92HT
(A286), silver coated.
24 BS EN 4499:2009
Aerospace series. Screws, 100<deg> countersunk
reduced head, offset cruciform recess, close tolerance
normal shank, short thread, in titanium alloy, anodized,
with aluminium pigmented coating.
25 BS EN 2542:2008
Aerospace series. Steel FE-PL1502 (25CrMo4).
Annealed. Bar and wire. De <LE> 40 mm. For
prevailing torque nuts.
4
26 BS EN 3373-010:2009
Aerospace series. Terminal lugs and in-line splices for
crimping on electric conductors. Terminal lugs, ring
shaped, tin plated, for crimping on copper conductors,
temperature up to 150 <deg>C for metric and inch stud
series. Product standard.
27 BS EN 3373-011:2009
Aerospace series. Terminal lugs and in-line splices for
crimping on electric conductors. Terminal lugs, ring
shaped, nickel plated, for crimping on copper
conductors, temperature up to 260 <deg>C for metric
and inch stud series. Product standard.
28 BS ISO 4254-9:2008 Agricultural machinery. Safety. Seed drills.
29 BS ISO 2332:2009
Thay thế: BS 6509:1984
Agricultural tractors and machinery. Connection of
implements via three-point linkage. Clearance zone
around implement.
30 BS ISO 11001-3:2009 Agricultural wheeled tractors and implements. Three-
point hitch couplers. Link coupler.
31
BS ISO 730:2009
Thay thế:
BS 1841-1:1996
Agricultural wheeled tractors. Rear-mounted three-point
Linkage. Categories 1N, 1, 2N, 2, 3N, 3, 4N and 4.
32 BS ISO 26825:2008
Anaesthetic and respiratory equipment. User-applied
labels for syringes containing drugs used during
anaesthesia. Colours, design and performance.
33 BS EN 61968-13:2008
Application integration at electric utilities. System
interfaces for distribution management. CIM RDF Model
exchange format for distribution.
34 BS EN 14846:2008
Building hardware. Locks and latches.
Electromechanically operated locks and striking plates.
Requirements and test methods.
35 BS EN 13126-10:2008
Building hardware. Requirements and test methods for
windows and doors height windows. Arm-balancing
systems.
36 BS EN 13126-11:2008
Building hardware. Requirements and test methods for
windows and doors height windows. Top hung
projecting reversible hardware.
37 BS EN 13126-12:2008
Building hardware. Requirements and test methods for
windows and doors height windows. Side hung
projecting reversible hardware.
38 BS EN 13126-4:2008 Building hardware. Requirements and test methods for
windows and doors height windows. Espagnolettes.
39 BS EN 13126-6:2008
Building hardware. Requirements and test methods for
windows and doors height windows. Variable geometry
stay hinges (with or without a friction stay).
40 BS EN 15527:2008
Characterization of waste. Determination of polycyclic
aromatic hydrocarbons (PAH) in waste using gas
chromatography mass spectrometry (GC/MS).
5
41 BS EN ISO
20565-1:2008
Chemical analysis of chrome-bearing refractory products
and chrome-bearing raw materials (alternative to the X-
ray fluorescence method). Apparatus, reagents,
dissolution and determination of gravimetric silica.
42 BS EN ISO
20565-2:2008
Chemical analysis of chrome-bearing refractory products
and chrome-bearing raw materials (alternative to the X-
ray fluorescence method). Wet chemical analysis.
43 BS EN ISO
20565-3:2008
Chemical analysis of chrome-bearing refractory products
and chrome-bearing raw materials (alternative to the X-
ray fluorescence method). Flame atomic absorption
spectrometry (FAAS) and inductively coupled plasma
atomic emission spectrometry (ICP-AES).
44 BS ISO 21439:2009 Clinical dosimetry. Beta radiation sources for
brachytherapy.
45 BS EN
61076-3-116:2008
Connectors for electronic equipment. Product
requirements. Rectangular connectors. Detail
specification for protective housings for use with 8-way
shielded and unshielded connectors for frequencies up to
600 MHz for industrial environments incorporating the
IEC 60603-7 series interface. Variant 13 related to IEC
61076-3-106. Locking lever.
46 BS EN 60512-25-9:2008
Connectors for electronic equipment. Tests and
measurements. Signal integrity tests. Test 25i. Alien
crosstalk.
47 BS EN ISO 21531:2009 Dentistry. Graphical symbols for dental instruments.
48 BS EN 50496:2008 Determination of workers' exposure to electromagnetic
fields and assessment of risk at a broadcast site.
49
BS EN 60958-1:2008
Thay thế:
BS EN 60958-1:2004
Digital audio interface. General.
50
BS EN 448:2009
Thay thế:
BS EN 448:2003
District heating pipes. Preinsulated bonded pipe systems
for directly buried hot water networks. Fitting assemblies
of steel service pipes, polyurethane thermal insulation
and outer casing of polyethylene.
51 BS EN 62343-1-2:2008
Dynamic modules. Performance standards. Dynamic
chromatic dispersion compensator with pigtails for use in
controlled environments (Category C).
52 BS ISO 6396:2008
Earth-moving machinery. Determination of emission
sound pressure level at operator's position. Dynamic test
conditions.
53
BS ISO 6393:2008
Thay thế:
BS ISO 6393:1998
Earth-moving machinery. Determination of sound power
level noise emissions. Stationary test conditions..
6
54
BS ISO 6395:2008
Thay thế:
BS 6812-3:1991
Earth-moving machinery. Determination of sound power
level. Dynamic test conditions.
55
BS ISO 6394:2008
Thay thế:
BS ISO 6394:1998
Earth-moving machinery. Determination of the emission
sound pressure level at the operator's position. Stationary
test conditions.
56 BS EN 62059-31-1:2008
Electricity metering equipment. Dependability.
Accelerated reliability testing. Elevated temperature and
humidity.
57
BS ISO 14050:2009
Thay thế:
BS ISO 14050:2002
Environmental management. Vocabulary.
58 BS ISO 22856:2008 Equipment for crop protection. Methods for the
laboratory measurement of spray drift. Wind tunnels.
59 BS EN ISO
11064-5:2008
Ergonomic design of control centres. Displays and
controls.
60 BS ISO 1891:2009
Thay thế: BS 6040:1981 Fasteners. Terminology .
61 BS EN 62317-14:2008 Ferrite cores. Dimensions. EFD-cores for use in power
supply applications.
62
BE EN 60695-1-30:2008
Thay thế:
BS EN 60695-1-30:2002
Fire hazard testing. Guidance for assessing the fire
hazard of electrotechnical products. Preselection testing
process. General guidelines.
63
BS EN 1366-3:2009
Thay thế:
BS EN 1366-3:2004
Fire resistance tests for service installations. Penetration
seals.
64
BS EN 1036-1:2007
Thay thế:
BS EN 1036:1999
Glass in building. Mirrors from silver-coated float glass
for internal use. Definitions, requirements and test
methods.
65 BS EN 62024-2:2009
High frequency inductive components. Electrical
characteristics and measuring methods. Rated current of
inductors for DC to DC converters.
66
BS EN 62271-1:2008
Thay thế:
BS EN 60694:1997
High-voltage switchgear and controlgear. Common
specifications.
67
BS EN 61158-4-1:2008
Thay thế:
BS EN 61158-4:2004
Industrial communication networks. Fieldbus
specifications. Data-link layer protocol specification.
Type 1 elements.
68
BS EN 13573:2009
Thay thế:
BS EN 13573:2001
Inland navigation vessels. Anchoring, coupling, towing,
hauling and mooring systems.
69
BS EN 14504:2009
Thay thế:
BS EN 14504:2004
Inland navigation vessels. Floating landing stages.
Requirements, tests.
7
70
BS EN 60137:2008
Thay thế:
BS EN 60137:2003
Insulated bushings for alternating voltages above 1000
V.
71
BS EN 1094-1:2008
Thay thế:
BS EN 1094-1:1997
BS EN 1094-3:2003
Insulating refractory products. Terminology,
classification and methods of test for high temperature
insulation wool products.
72
BS EN 61952:2008
Thay thế:
BS EN 61952:2003
Insulators for overhead lines. Composite line post
insulators for A.C. systems with a nominal voltage
greater than 1000 V. Definitions, test methods and
acceptance criteria.
73 BS EN 61109:2008
Insulators for overhead lines. Composite suspension and
tension insulators for a.c. systems with a nominal voltage
greater than 1000 V. Definitions, test methods and
acceptance criteria.
74
BS EN 61467:2008
Thay thế:
BS IEC 61467:1997
Insulators for overhead lines. Insulator strings and sets
for lines with a nominal voltage greater than 1000 V. AC
power arc tests.
75
BS EN 13120:2009
Thay thế:
BS EN 13120:2004
Internal blinds. Performance requirements including
safety.
76 BS EN 50342-3:2008 Lead-acid starter batteries. Terminal system for batteries
with 36 V nominal voltage.
77
BS EN ISO 22288:2009
Thay thế:
BS EN 13335:2002
Leather. Physical and mechanical tests. Determination of
flex resistance by the vamp flex method.
78
BS EN ISO 17232:2009
Thay thế:
BS EN 13540:2002
Leather. Physical and mechanical tests. Determination of
heat resistance of patent leather.
79 BS EN 50164-5:2009
Lightning protection components (LPC). Requirements
for earth electrode inspection housings and earth
electrode seals.
80 BS EN 50164-6:2009 Lightning protection components (LPC). Requirements
for lightning strike counters.
81 BS EN 15609:2008
LPG equipment and accessories. LPG propulsion
systems for boats, yachts and other craft. Installation
requirements.
82
BS EN 61174:2008
Thay thế: BS EN
61174:2001
Maritime navigation and radiocommunication equipment
and systems. Electronic chart display and information
system (ECDIS). Operational and performance
requirements, methods of testing and required test
results.
83 BS EN 15181:2008 Measuring method of the energy consumption of gas
fired ovens.
8
84
BS ISO 10816-3:2009
Thay thế:
BS 7854-3:1998
Mechanical vibration. Evaluation of machine vibration
by measurements on non-rotating parts. Industrial
machines with nominal power above 15 kW and nominal
speeds between 120 r/min and 15000 r/min when
measured in situ.
85 BS ISO 10816-7:2009
Mechanical vibration. Evaluation of machine vibration
by measurements on non-rotating parts. Rotodynamic
pumps for industrial applications, including
measurements on rotating shafts.
86
BS ISO 7919-3:2009
Thay thế:
BS ISO 7919-3:1996
Mechanical vibration. Evaluation of machine vibration
by measurements on rotating shafts. Coupled industrial
machines.
87 BS EN 62494-1:2008
Medical electrical equipment. Exposure index of digital
X-ray imaging systems. Definitions and requirements for
general radiography.
88
BS EN 60601-2-39:2008
Thay thế:
BS EN 60601-2-39:1999,
BS 5724-2.39:1999.
Medical electrical equipment. Particular requirements for
basic safety and essential performance of peritoneal
dialysis equipment.
89
BS EN 60601-2-29:2008
Thay thế:
BS EN 60601-2-29:1999,
BS 5724-2.129:1999.
Medical electrical equipment. Particular requirements for
the basic safety and essential performance of
radiotherapy simulators.
90 BS EN 80601-2-58:2009
Medical electrical equipment. Particular requirements for
the basic safety and essential performance of lens
removal devices and vitrectomy devices for ophthalmic
surgery.
91
BS EN ISO 2081:2008
Thay thế:
BS EN 12329:2000
Metallic and other inorganic coatings. Electroplated
coatings of zinc with supplementary treatments on iron
or steel.
92 BS ISO 15726:2009 Metallic coatings and other inorganic coatings.
Electrodeposited zinc alloys with nickel, cobalt or iron.
93
BS EN 62002-2:2008
Thay thế:
BS EN 62002-2:2006
Mobile and portable DVB-T/H radio access. Interface
conformance testing.
94 BS EN 62503:2008 Multimedia quality. Method of assessment of
synchronization of audio and video.
95 BS ISO 20765-1:2005
Natural gas. Calculation of thermodynamic properties.
Gas phase properties for transmission and distribution
applications.
96
BS EN 419-1:2009
Thay thế:
BS EN 419-1:2000
Non-domestic gas-fired overhead luminous radiant
heaters. Safety.
97 BS ISO 27467:2009 Nuclear criticality safety. Analysis of a postulated
criticality accident.
9
98 BS EN 61291-6-1:2008 Optical amplifiers. Interfaces. Command set.
99
BS EN 61291-4:2008
Thay thế:
BS EN 61291-4:2003
Optical amplifiers. Multichannel applications.
Performance specification template.
100
BS EN 61290-10-2:2008
Thay thế:
BS EN 61290-10-2:2003
Optical amplifiers. Test methods. Multichannel
parameters. Pulse method using a gated optical spectrum
analyzer.
101
BS EN 61290-3:2008
Thay thế:
BS EN 61290-3:2000
Optical amplifiers. Test methods. Noise figure
parameters.
102
BS EN 61290-3-2:2008
Thay thế:
BS EN 61290-3-2:2003
Optical amplifiers. Test methods. Noise figure
parameters. Electrical spectrum analyzer method.
103
BS EN 60793-2:2008
Thay thế:
BS EN 60793-2:2004
Optical fibres. Product specifications. General.
104
BS EN 60286-2:2009
Thay thế:
BS EN 60286-2:1998
Packaging of components for automatic handling.
Packaging of components with unidirectional leads on
continuous tapes.
105 BS 7533-13:2009
Pavements constructed with clay, natural stone or
concrete pavers. Guide for the design of permeable
pavements constructed with concrete paving blocks and
flags, natural stone slabs and setts and clay pavers.
106
BS EN 13942:2009
Thay thế:
BS EN 13942:2003
Petroleum and natural gas industries. Pipeline
transportation systems. Pipeline valves.
107
BS ISO 10307-1:2009
Thay thế:
BS 2000-375:1999
Petroleum products. Total sediment in residual fuel oils.
Determination by hot filtration.
108
BS ISO 10307-2:2009
Thay thế:
BS 2000-390:1994
Petroleum products. Total sediment in residual fuel oils.
Determination using standard procedures for ageing.
109
BS EN 62471:2008
Thay thế:
BS EN 60825-1:1994
Photobiological safety of lamps and lamp systems.
110
BS ISO 11414:2009
Thay thế: BS 2782-11:
Method 1150B:1998
Plastics pipes and fittings. Preparation of polyethylene
(PE) pipe/pipe or pipe/fitting test piece assemblies by
butt fusion.
111
BS ISO 11413:2008
Thay thế: BS 2782-11:
Method 1150E:1997
Plastics pipes and fittings. Preparation of test piece
assemblies between a polyethylene (PE) pipe and an
electrofusion fitting.
112
BS ISO 10840:2008
Thay thế:
BS ISO 10840:2003
Plastics. Guidance for the use of standard fire tests.
10
113 BS EN 13245-2:2008
Plastics. Unplasticized poly(vinyl chloride) (PVC-U)
profiles for building applications. PVC-U profiles and
PVC-UE profiles for internal and external wall and
ceiling finishes.
114 BS ISO 24033:2009
Polyethylene of raised temperature resistance (PE-RT)
pipes. Effect of time and temperature on the expected
strength.
115 BS EN 50499:2008 Procedure for the assessment of the exposure of workers
to electromagnetic fields.
116 BS ISO 29782:2008
Prostheses and orthoses. Factors to be considered when
specifying a prosthesis for a person who has had a lower
limb amputation.
117 BS ISO 29781:2008
Prostheses and orthoses. Factors to be included when
describing physical activity of a person who has had a
lower limb amputation(s) or who has a deficiency of a
lower limb segment(s) present at birth.
118 BS ISO 29783-1:2008 Prosthetics and orthotics. Vocabulary. Normal gait.
119
BS ISO 80000-11:2008
Thay thế:
BS ISO 31-12:1992
Quantities and units. Characteristic numbers.
120 BS EN 15220-1:2008 Railway applications. Brake indicators. Pneumatically
operated brake indicators.
121 BS EN 15625:2008 Railway applications. Braking. Automatic variable load
sensing devices.
122 BS EN 15624:2008 Railway applications. Braking. Empty-loaded
changeover devices.
123 BS EN 15566:2009 Railway applications. Railway rolling stock. Draw gear
and screw coupling.
124 BS EN 14033-1:2008
Railway applications. Track. Railbound construction and
maintenance machines. Technical requirements for
running.
125
BS EN ISO
11102-2:2009
Thay thế: BS EN ISO
11102-2:1997
Reciprocating internal combustion engines. Handle
starting equipment. Method of testing the angle of
disengagement.
126 BS EN 15333-2:2009 Respiratory equipment. Open-circuit umbilical supplied
compressed gas diving apparatus. Free flow apparatus.
127
BS ISO 4040:2009
Thay thế:
BS AU 199a:1997
Road vehicles. Location of hand controls, indicators and
tell-tales in motor vehicles.
128 BS ISO 22900-2:2009
Road vehicles. Modular vehicle communication interface
(MVCI). Diagnostic protocol data unit application
programming interface (D-PDU API).
129 BS ISO 4141-4:2009 Road vehicles. Multi-core connecting cables. Test
methods and requirements for coiled cable assemblies.
11
130
BS ISO 6550-3:2009
Thay thế:
BS ISO 6550-3:2002
Road vehicles. Sheath-type glow-plugs with conical
seating and their cylinder head housing. M10 glow-
plugs.
131 BS ISO 7578:2008 Road vehicles. Sheath-type glow-plugs. General
requirements and test methods.
132
BS EN 508-1:2008
Thay thế:
BS EN 508-1:2000
Roofing products from metal sheet. Specification for
self-supporting products of steel, aluminium or stainless
steel sheet. Steel.
133
BS EN 508-2:2008
Thay thế:
BS EN 508-2:2000
Roofing products from metal sheet. Specification for
self-supporting products of steel, aluminium or stainless
steel sheet. Aluminium.
134
BS EN 508-3:2008
Thay thế:
BS EN 508-3:2000
Roofing products from metal sheet. Specification for
self-supporting products of steel, aluminium or stainless
steel sheet. Stainless steel.
135
BS EN 506:2008
Thay thế:
BS EN 506:2000
Roofing products of metal sheet. Specification for self-
supporting products of copper or zinc sheet.
136
BS EN 60034-4:2008
Thay thế:
BS EN 60034-4:1995
Rotating electrical machines. Methods for determining
synchronous machine quantities from tests.
137
BS EN ISO 6803:2008
Thay thế:
BS EN ISO 6803:1997
Rubber or plastics hoses and hose assemblies. Hydraulic-
pressure impulse test without flexing.
138
BS ISO 815-2:2008
Thay thế:
BS 903-A6:1992
Rubber, vulcanized or thermoplastic. Determination of
compression set. At low temperatures.
139
BS EN 60519-21:2009
Thay thế:
BS EN 60519-21:1998
Safety in electroheat installations. Particular
requirements for resistance heating equipment. Heating
and melting glass equipment.
140
BS EN ISO
10472-4:2008
Thay thế: BS EN ISO
10472-4:1998
Safety requirements for industrial laundry machinery.
Air dryers.
141 BS ISO 22036:2008
Soil quality. Determination of trace elements in extracts
of soil by inductively coupled plasma-atomic emission
spectrometry (ICP-AES).
142 BS ISO 19730:2008 Soil quality. Extraction of trace elements from soil using
ammonium nitrate solution.
143 BS ISO 25177:2008 Soil quality. Field soil description.
144 BS ISO 26868:2009 Space data and information transfer systems. Image data
compression.
145 BS ISO 15862:2009 Space systems. Launch-vehicle-to-spacecraft flight
environments telemetry data processing.
12
146
BS EN 13071-1:2008
Thay thế:
BS EN 13071:2002
Stationary waste containers up to 5000 l, top lifted and
bottom emptied. General requirements.
147
BS EN 13071-2:2008
Thay thế:
BS EN 13071:2002
Stationary waste containers up to 5000 l, top lifted and
bottom emptied. Additional requirements for
underground or partly underground systems.
148
BS EN 1966:2009
Thay thế:
BS EN 1966:2002
Structural adhesives. Characterization of a surface by
measuring adhesion by means of the three point bending
method.
149
BS EN 13081:2008
Thay thế:
BS EN 13081:2001
Tanks for transport of dangerous goods. Service
equipment for tanks. Vapour collection adaptor and
coupler.
150
BS EN 13082:2008
Thay thế:
BS EN 13082:2001
Tanks for transport of dangerous goods. Service
equipment for tanks. Vapour transfer valve.
151 BS EN 60703:2009
Thay thế: BS 7689:1993
Test methods for electroheating installations with
electron guns.
152 BS EN 50483-1:2009 Test requirements for low voltage aerial bundled cable
accessories. Generalities.
153 BS EN 50483-2:2009
Test requirements for low voltage aerial bundled cable
accessories. Tension and suspension clamps for self
supporting system.
154 BS EN 50483-3:2009
Test requirements for low voltage aerial bundled cable
accessories. Tension and suspension clamps for neutral
messenger system.
155 BS EN 50483-4:2009 Test requirements for low voltage aerial bundled cable
accessories. Connectors.
156 BS EN 50483-5:2009 Test requirements for low voltage aerial bundled cable
accessories. Electrical ageing test.
157 BS EN 50483-6:2009 Test requirements for low voltage aerial bundled cable
accessories. Environmental testing.
158 BS EN 15648:2009 Thermal spraying. Component related procedure
qualification.
159 BS ISO 16055:2003 Tobacco and tobacco products. Monitor test piece.
Requirements and use.
160 BS ISO 22303:2008 Tobacco. Determination of tobacco specific
nitrosamines. Method using buffer extraction.
161
BS ISO 3767-2:2008
Thay thế:
BS ISO 3767-2:1991
Tractors, machinery for agriculture and forestry,
powered lawn and garden equipment. Symbols for
operator controls and other displays. Symbols for
agricultural tractors and machinery.
162
BS EN 55025:2008
Thay thế:
BS EN 55025:2003
Vehicles, boats and internal combustion engines. Radio
disturbance characteristics. Limits and methods of
measurement for the protection of on-board receivers.
13
163
BS EN 1011-1:2009
Thay thế:
BS EN 1011-1:1998
Welding. Recommendations for welding of metallic
materials. General guidance for arc welding.
164 BS EN 61400-25-4:2008
Wind turbines. Communications for monitoring and
control of wind power plants. Mapping to
communication profile.
Tiêu chuẩn Nhật - JIS
TT Số hiệu
Tiêu chuẩn Tên tiêu chuẩn A4
1
JIS C 8117:2008
Thay thế:
JIS C 8117:2006
AC supplied electronic ballasts for fluorescent
lamps. 37
2 JIS R 1536:2009/AMD 1 Acid and heat resisting bricks for chemical
industry (Amendment 1). 1
3
JIS B 2321:2009/AMD1
Thay thế: Một phần
JIS B 2321:1995
Aluminium and aluminium alloy butt-welding
pipe fittings (Amendment 1). 2
4 JIS S 2010:2009/AMD 1 Aluminium sheet wares (Amendment 1). 2
5 JIS K 2208:2009/AMD 1 Asphalt emulsion (Amendment 1). 2
6 JIS S 2151:2009 Automatic gas valves for gas appliances
(Amendment 1). 4
7
JIS C 8119:2008
Thay thế:
JIS C 8119-2:1999
Ballasts for discharge lamps (excluding tubular
fluorescent lamps). Performance requirements. 30
8
JIS C 8108:2008
Thay thế:
JIS C 8108:1991
Ballasts for fluorescent lamps. 22
9
JIS C 8118:2008
Thay thế:
JIS C 8118-2:1999
Ballasts for tubular fluorescent lamps.
Performance requirements. 42
10
JIS C 6485:2008
Thay thế:
JIS C 6485:1997
Base materials for printed circuits. Paper base,
phenolic resin. 17
11 JIS S 2149:2009/AMD 1 Bimetal type thermal switches for gas appliances
(Amendment 1). 2
12 JIS C 9321:2009/AMD1 Capacitor discharge type spot welding machines
(Amendment 1). 1
13
JIS H 2123:2009/AMD1
Thay thế: Một phần
JIS H 2123:1999
Copper billets and cakes (Amendment 1). 1
14 JIS K 2397:2009/AMD 1 Deicing and defrosting fluids for automobiles
(Amendment 1). 4
14
15
JIS H 4541:2009/AMD1
Thay thế: Một phần
JIS H 4541:1997
Dumet wires (Amendment 1). 1
16 JIS C 8302:2009/AMD 1 Edison screw lampholders (Amendment 1). 3
17 JIS K 6783:2009/AMD 1 Ethylene/vinyl acetate copolymer films for
agriculture (Amendment 1). 1
18 JIS R 1701-4:2008
Fine ceramics (advanced ceramics, advanced
technical ceramics). Test method for air
purification performance of photocatalytic
materials. Part 4: Removal of formaldehyde.
9
19 JIS R 1701-5:2008
Fine ceramics (advanced ceramics, advanced
technical ceramics). Test method for air
purification performance of photocatalytic
materials. Part 5: Removal of methylmercaptan.
10
20
JIS C 5101-2:2009
Thay thế:
JIS C 5115-2:1998
Fixed capacitors for use in electronic equipment.
Part 2: Sectional specification: Fixed metallized
polyethylene-terephthalate film dielectric d.c.
capacitors.
26
21
JIS C 5101-2-1:2009
Thay thế:
JIS C 5101-2-1:1998
Fixed capacitors for use in electronic equipment.
Part 2-1: Blank detail specification: Fixed
metallized polyethylene-terephthalate film
dialectic d.c. capacitors. Assessment levels E and
EZ.
11
22
JIS C 8106:2008
Thay thế:
JIS C 8106:1999
Fluorescent lamp luminaires for commercial,
indusial and public lighting. 14
23
JIS C 8115:2008
Thay thế:
JIS C 8115:1999
Fluorescent lamp luminaires for residential
lighting. 9
24 JIS A 5712:2009/AMD 1 Glass fiber reinforced plastic bathtubs connected
with floor (Amendment 1). 1
25 JIS S 6023:2009/AMD 1 Glues (Amendment 1). 1
26 JIS S 0014:2009/AMD1
Guidelines for the elderly and people with
disabilities. Auditory signals on consumer
products. Sound pressure levels of signals for the
elderly and in noisy conditions (Amendment 1).
1
27 JIS R 9151:2009/AMD1 Gypsum for portland cement retarder
(Amendment 1). 1
28
JIS B 4232:2009/AMD 1
Thay thế: Một phần
JIS B 4232:1996
Involute gear milling cutters (Amendment 1). 2
29 JIS B 4239:2009/AMD 1 Involute spline broaches (Amendment 1). 1
30 JIS B 4238:2009/AMD 1 Keyway broaches (Amendment 1). 1
15
31
JIS C 9502:2008
Thay thế:
JIS C 9502:1998
Lighting equipment for bicycles. 41
32 JIS S 2150:2009/AMD 1 Manually operated gas valves for gas appliances
(Amendment 1). 3
33
JIS Z 3322:2009/AMD 1
Thay thế:
JIS Z 3322:1996
Materials for stainless steel overlay welding with
strip electrode (Amendment 1). 1
34 JIS T 0601-2-208:2008
Medical electrical equipment. Part 2-208:
Particular requirements for the safety of electric
potential equipment.
7
35 JIS S 2145:2009/AMD 2 Metallic flexible hoses for gas (Amendment 2). 3
36 JIS R 9112:2009/AMD1 Method of physical test for plaster of paris mold
for pottery (Amendment 1). 1
37 JIS B 4236:2009/AMD 1 Milling cutters - Counterbores for hexagon socket
head bolts (Amendment 1). 1
38 JIS S 6041:2009/AMD 1 Paper punches (Amendment 1). 1
39 JIS C 8832:2008 Performance test for stationary polymer elecolyte
fuel cell stack. 55
40 JIS K 2235:2009/AMD 1 Petroleum waxes (Amendment 1). 2
41 JIS B 4356:2009/AMD 1 Pinion type cutters (Amendment 1). 2
42 JIS R 9111:2009/AMD 1 Plaster of paris mold for pottery (Amendment 1). 1
43
JIS K 7151:2009/AMD1
Thay thế: Một phần
JIS K 7151:1995
Plastics - Compression moulding test specimens
of thermoplastic materials (Amendment 1). 2
44 JIS K 2236:2009/AMD 1 Polish for automobile (Amendment 1). 3
45
JIS S 2147:2009/AMD 1
Thay thế:
JIS S 2147-1991
Portable cookers attached to liquefied petroleum
gas cylinder (Amendment 1). 2
46 JIS B 8416:2009/AMD 1 Portable type oil burning space heaters for
indusial use (Amendment 1). 2
47
JIS Q 9001:2008
Thay thế:
JIS Q 9001:2000
Quality management systems. Requirements. 42
48 JIS K 6930:2009/AMD 1
Reclaimed granular molding materials of
agricultural polyvinyl chloride film (Amendment
1).
1
49 JIS H 2111:2009/AMD1 Refined aluminium ingots (Amendment 1). 1
50 JIS B 1456:2009/AMD1 Roller chain shaft couplings (Amendment 1). 6
51
JIS D 2602:2008
Thay thế:
JIS D 2602:1999
Rubber hoses and tubing for cooling systems for
internal-combustion engines. Specification. 21
16
52
JIS D 2608:2008
Thay thế:
JIS D 2608:1999
Rubber hoses and tubing for cooling systems for
internal-combustion engines. Specification. 21
53 JIS K 2228:2009/AMD 1 Rubber lubricant of non-petroleum base for motor
vehicle brake systems (Amendment 1). 2
54 JIS S 2146:2009/AMD 1
Rubber tubes and polyvinyl chloride hoses with
both end convenient joints for gas (Amendment
1).
5
55 JIS C 8831:2008 Safety evaluation test for stationary polymer
elecolyte fuel cell stack. 59
56
JIS S 4001:2009
Thay thế:
JIS S 4001:1985
Safety match. 7
57
JIS B 4220:2009/AMD 1
Thay thế: Một phần
JIS B 4220:1988
Screw slotting cutters(Amendment 1). 2
58 JIS K 3901:2009/AMD 1 Shoe polish (Amendment 1). 1
59 JIS S 6020:2009/AMD 1 SHUNIKU (Cinnabar seal-ink pads) (Amendment
1). 2
60 JIS C 2813:2009/AMD 1 Spring pressure type wire connectors for electrical
installations of buildings (Amendment 1). 2
61 JIS G 3214:2009/AMD1 Stainless steel forgings for pressure vessels
(Amendment 1). 3
62 JIS S 2053:2009/AMD 1 Stainless steel vacuum bottles (Amendment 1). 1
63 JIS S 6016:2009/AMD 1 Stamp pads (Amendment 1). 2
64 JIS X 6813:2008 Standard specification form for digital duplicator
and related testing procedure. 9
65
JIS B 2312:2009
Thay thế:
JIS B 2312:2001
Steel butt welding pipe fittings. 47
66
JIS G 0306:2009/AMD1
Thay thế: Một phần
JIS G 0306:1988
Steel forgings - General technical requirements
(Amendment 1). 2
67
JIS B 2313:2009
Thay thế:
JIS B 2312:2001
Steel plate butt welding pipe fittings. 50
68 JIS B 4351:2009/AMD 1 Straight bevel gear generating cutters (type G)
(Amendment 1). 4
69 JIS S 7301:2009/AMD 1 Swimming goggles (Amendment 1). 1
70
JIS B 4213:2009/AMD 1
Thay thế: Một phần
JIS B 4213:1996
Tapered end mills for apeziform runner with
parallel shanks(Amendment 1). 2
71 JIS B 4210:2009/AMD 1 Tapered end mills (Amendment 1). 2
17
72 JIS L 1920:2007 Testing methods for efficacy against house dust
mite of textiles. 25
73
JIS R 7202:2008
Thay thế:
JIS R 7202:1997
Testing methods for screw precision of cylindrical
machined graphite electrodes. 17
74 JIS K 6816:2008 Thermoplastics pipes and fittings - Test method
for Vicat softening temperature. 9
75
JIS K 6814:2008
Thay thế:
JIS K 6814-2:2002,
JIS K 6814-1:2002
Thermoplastics pipes. Thermal reversion test
method. 8
76 JIS B 4501:2009/AMD 1 Thread rolling cylindrical dies (Amendment 1). 2
77 JIS B 4502:2009/AMD 1 Thread rolling flat dies (Amendment 1). 2
78
JIS H 2108:2009/AMD1
Thay thế: Một phần
JIS H 2108:1996
Tin metal (Amendment 1). 1
79
JIS Z 3331:2009/AMD 1
Thay thế:
JIS Z 3331:1999
Titanium and titanium alloy welding rods and
solid wires (Amendment 1). 2
80 JIS C 7508:2009/AMD 1 Torch lamps (Amendment 1). 1
81 JIS C 7528:2009/AMD 1 Traffic signal lamps (Amendment 1). 1
82
JIS B 2403:2009
Thay thế:
JIS B 2403:1995
V packings. 15
83 JIS S 2006:2009/AMD 1 Vacuum bottles. 1
84
JIS H 2102:2009/AMD1
Thay thế: Một phần
JIS H 2102:1968
Virgin aluminium ingots (Amendment 1). 2
85
JIS H 2110:2009/AMD1
Thay thế: Một phần
JIS H 2110:1969
Virgin aluminium ingots for electrical purposes
(Amendment 1). 2
86 JIS A 4003:2009/AMD 1 Warm air furnaces (Amendment 1). 2
87 JIS K 2398:2009/AMD 1 Windshield washer fluids for automobiles
(Amendment 1). 1
88
JIS B 2809:2009
Thay thế: Một phần
JIS B 2809:1996
Wire ropes - Grips for rope or wire sand
(Amendment 1). 3
89 JIS H 5301:2009/AMD1 Zinc alloy die castings (Amendment 1). 2
Thư viện Đại học Công Nghiệp TP.HCM đã ký hợp đồng cung cấp thông tin trọn gói với Trung tâm thông tin khoa học và công nghệ TP.HCM, toàn thể sinh viên, giảng viên và cán bộ nhân viên trong trường có nhu cầu tra cứu thông tin xin liên hệ trực tiếp: Phòng đảm bảo thông tin của trung tâm thông tin khoa học và công nghệ TP.HCM Địa chỉ: 79 Trương Định - Q1 - TP.HCM
18
ĐT: (08)38243826: (08)38297040 Ext: 202-203-216) Fax: 38291957 Website: www.sesti.gov.vn Email: [email protected] Lưu ý 1/: Cung cấp thông tin miễn phí (chỉ thanh toán tiền photocopy và giấy in) khi đến gửi yêu cầu thông tin, nhớ mang theo thẻ sinh viên và thẻ giảng viên. 2/ Nếu bạn đọc không thể đến Trung tâm thông tin khoa học và công nghệ TP.HCM - hãy gửi yêu cầu thông tin cho Thư viện Đại học Công Nghiệp TP.HCM. Liên hệ: Thủ thư Phòng Đa phương tiện. Mọi chi tiết xin liên hê Thư viện ĐHCN TP.HCM. ĐT: (08)38940390 (130 - 131 -132) Email: [email protected] - [email protected]
.