tsxpcx3030 cable

8/3/2019 Tsxpcx3030 Cable

1/5

The delivery time is usually within 1-3 working days after your order.Then

we will update your order status and inform you the tracking No..We use

Hongkong DHL or UPS or TNT,so it usually could be tracked until the

next day evening.If you can't track your parcel successfully with the

tracking No.,please contact us by email and we will tell you how to track

the parcel successfully.

For the value declared for the customs,we usually declare undervalue and send as

the sample in order to save the customer's duty.If you need to declare real

value,please remark it in the comments.We will do according to your idea.

Schneider

larger image

TSXPCX3030+:isolated USB interface

TSXPCX3030 cable$79.00

optoelectronic isolated USB interface TSXPCX3030 cable,connect the TER port of PLC.

Introduction

TSXPCX3030+ is a multi-function programming cable which provides the serial

connection and RS485 signal conversion through the USB interface. The cable is

photoelectric isolated, with the overcurrent,surging, and transient overvoltage protectioncircuitry, which can be hot plug. It supports the long-distance communication.

TSXPCX3030 + can be used for Modicon TSX Series PLC and PC or other equipmentwhich dont provide the traditional serial port for communication. The cable can connect

with the TER communication port of TSX Premium (57), TSX Micro (37), TSX Nano(07), TSX Naza (08) and Twido PLC.


2/5

The snap switch located on the TSXPCX3030+ programming cable are used to choosedifferent operating modes. The cable rejects the way which the transceiving of the RS485

is controlled by the PLC, and all the data transceiving is automatically controlled. It canbe used for multi-point and point-to-point communication applications.

TER port of the TSX Series PLC have a DPT signal pin, which is used to determine itsworking mode. If the DPT is high-level, TER always work in the Uni-Telway Master(master station) mode, and it need under this mode for PLC programming. If the DPT is

low level, the working mode of TER is decided by the PLC.

TSXPCX3030+ principle and figure structure:

Switch M / S corresponding mode

Switch Function DPT the Control


3/5

level flow of data

M PLC works in main-station model for programming or as

Uni-Telway Master for more points communications

1 auto

S PLC works in slave-station model for other multi-point

communication

0 auto

This product is the USB to RS485 isolated converters which with the protection, so its need

to use the power of USB port and TER port. Due to the AUX expansion communications interface

of PLC has no power-pin, the product do not support Communicating with AUX port.

Features and technological index:

support Windows2000/Windows XP operating system

fully compatible with USB V1.1 norms and USB CDC V1.1

USB-bus powered and PLC TER port power supply at the same time

voltage of Optical Isolator: 1000 VDC (up to 3000 VDC, it should be declared when making an

order).

baud rate: 300 bps ~ 1Mbps automatically adaptive.

apply to the TSX Premium, Micro, Naza, Nano and Twido

each PC only supports a TSXPCX3030 + cable

Length: 3 meters, colors: black

Usage:


4/5

TSXPCX3030+ needs to install USB device drivers at first. And to communicate with PLC

needs the latest version of the Uni-Telway or MODBUS driver.

The Uni-Telway version which can support TSXPCX3030+:

Win2K/XP V1.6

WinNT4/95/98/Me/DOS do not support

The MODBUS version which can support fTSXPCX3030+:

Win2K/XP V1.1

WinNT4/95/98/Me/DOS do not support

These drivers are usually included in the programming software on CD-ROM And for the

specific installation steps, please refer to the instruction files on the CD-ROM drivers, and details

are not necessarily listed here.

After the installation, icons will appear on the control panel of WINDOWS as follows:

Double-click on the icon, then achieve the settings, XWAY Test, MODBUS Test

communications test of the serial ports (COM slogan) which is connected with TSXPCX3030+

cables. Then the programming software can be used to complete the normal communication with

the PLC.

Long-distance communications:


5/5

The largest communications range between the TSXPCX3030+ and PLC are up to 2

kilometers (9600 bps),when external plus terminals 120 ohm resistance, an 100mA power and a

5 VDC power on the RS485 ports (8 pin Mini DIN Male) of the cable. And a FSACC01 Isolators

Box (Schneider's model: TSXPACC01) is need to install at the end of PLC. 0.5 mm2 unshielded

twisted pair lines are used for Communications. When the distance is Over 500m, a RS485

repeaters (model: E485GP), can be installed for extending the distance.

Please Note: USB interface cable cannot be extended.

The quality is guaranteed.It's tested before shippment.Not made by Schneider,OEM product asthe replacement.

After you place the order on line,pls contact us and we will calculate the freight fee for youaccording to your requirements.

The item will be delivered within 3-5 working days once payment is received and cleared.Pleasepay within 3 days after your order.

If you need large quantity(more than 20PCS),Pls contact us and we will give you the competitivewholesale price.

tsxpcx3030 cable

Documents