trusted for real life - · pdf filein addition to standard test services, ... volvo • std...
TRANSCRIPT
TRUSTED FOR REAL LIFE mAnUFAcTURERS AnD EqUIpmEnT mAnUFAcTURERS, cERTIFy ThE mATERIALS AnD EqUIpmEnT OF InDUSTRIAL vEhIcLESMany of SGS Sercovam's products are used by motorised vehicle manufacturers in all industrial and agricultural sectors. Our highly qualified teams of engineers and technicians test and certify your materials and equipment, whatever your field of activity.
For many years we have been working together with the Research & Development centres of major manufacturers who regularly audit our laboratories. These audits, supplemented by cross-linked tests, guarantee the equipment manufacturers test procedures that are identical to those carried out at the manufacturer sites.
In addition to standard test services, our technical teams are able to design and carry out tests on benches that are dedicated to your specific needs. Furthermore, SGS Sercovam has been certified with the Crédit Impôt Recherche (CIR - French research tax credit system) issued by the Research Ministry.
www.SgS.cOm
OUR SERvIcES, cOmpLyIng wITh ThOUSAnDS OF TEST STAnDARDS, cOvER ALL OR pART OF ThE SpEcIFIcATIOnS AnD TEchnIcAL SpEcIFIcATIOnS, IncLUDIng (nOn ExhAUSTIvE LIST):
mATERIALS' TESTIng, AppEARAncE TESTIng
UV light-ageing
Internal and external parts.Over 30 chambers: CI 3000, CI 35, Q-UV, QSUN, XENOTEST, SUNTEST, UV-CON, Arc Carbone CXW and CDMC, Climatron, XR-35, etc.All equipment manufacturers and international test methods.
Deterioration and appearance tests
Scratching, friction, abrasion, shot blasting, chipping including single impact, Taber and Martindale abrasion, sprinkling of all fluids, dust (IP), fluids, washer brushes, impact tests (including Dupont
impact tester), thickness measurements (microscopy), adhesion, etc.
Sensory and emission analyses
Olfactory: assessment of odour intensity and identification of the nature of the odour - on materials or whole parts.Tactile: qualitative and quantitative measurement concerning feelVOC, formaldehyde, fogging, etc.
Analyses of plastic materials
IRTF, DSC, CPG, SM, MFI, density, ash content, Vicat point, etc.
Mechanical tests
Static and dynamic properties of materials, from - 50 to + 200 °C, traction, compression, bending, fatigue (linear up to 100 kN and rotational up to 220 n.m) - insert tearing, peeling at 90 & 180°, hardness, Chapy and Izod impacts.Instrumented drop tower (impact with perforation).Ozone ageing for rubber.
Fire tests
Horizontal and vertical inflammability FMVSS 302, UL94.
protection
MERCEDES-BENZ
• DBL 5306: interior equipment materials / parts used in the passenger compartment - methods
• DBL 5348: compact foam and artificial leather - supply specification
• DBL 5416: plastic parts: boxes and operating parts - external applications
SCANIA
• TB 1900: electric apparatus - requirements and checking methods for environmental stress
• STD 4113: surface treatment, metal paint - requirements
• STD246: textiles
Agricultural vehicles
CLAAS
• CN 05 0215: electronic components (reliability for electronic components) - environmental specifications
AGCO
• FTS 915573: internal and external parts exposed to sunlight - test procedures
• CMS M 1917: decorative chromium plating on external plastic tractor components - requirements
JOHN DEERE
• SAE J 2432: ribbed v-belt - performance test
Constructional work and industrial machines
CATERPILLAR
• 1E 2500: fluid system components - cleanliness test
• 1E 1951: paint - high performance finish for metallic substrates
MANITOU
• PGQ 12: paint - compliance manual • DBE 10783: cooling system -
specifications
Road vehicles
VOLVO
• STD 121-0001: paint for metallic substrates - Class Y 600
• STD 121-0002: painted plastic parts for interior and exterior use - Class Y 650
• STD 120-0009: painted surfaces - cabs and parts
IVECO
• 18-8000: miscellaneous plastic components
• 16-0135: metallic materials, organic and non-organic coatings - corrosion tests
• 16-0170: Interior compartment components - Light-accelerated ageing
RVI
• 45.14.400: curable adhesives for gluing bodywork parts
• 32.00.400: interior trim parts - general instructions
• 47.02.441: bodywork and equipment
IP leak testing (degrees of protection)
From penetration of solid bodies IP1X to dust tests IP6X (talc, Arizona, Portland cement, etc.)Resistance to liquid penetration, from IPX1 to IPX9K.
Impact and vibration tests
8 shakers from 10 to 60 kN, coupled with climatic chambers (VRT, - 70 to + 180°C, with humidity) and with tables - Sinus vibrations, random.½ sinus impacts up to 2000 g, etc.
Test benches / fatigue resistance
In order to comply with all specific specifications, SGS puts its design office at your disposal for the design and creation of new dedicated test benches (for internal use).
Corrosion tests
Salt spray, VOLVO ACT, corrosion RENAULT ECC 1 & 2, PSA TCAC, alternated corrosion, Cass test, Ass test, corrosion 3C, Swaat test, corrosion 4 gas (H2S/SO2/NO2/Cl2), Kesternich, acid vapour, condensation / immersion, Herel test, Dr. Diehl, etc.
Climatic wear
Hot / cold / wet chambers up to 84 m3.Thermal impact, rapid temperature variation (up to 15 °C/mn), thermal impact through immersion.
Sunlight effect (without UV)
Insolation chambers of 6, 22 and 84 m3 for the majority of manufacturer test methods.
Chemical analyses
Immersion, dipping in all fluid types (volatile, fuel, oils, etc.)
COFRAC ACCREDITED TEST LABORATORY (ISO 17025)ACCREDITATIONS N°
1-1526 & 1-2014LABORATORY APPROVED BY NUMEROUS AUTOMOTIVE
MANUFACTURERSCERTIFIED FOR FRENCH COMPANY RESEARCH TAX CREDIT
THE COFRAC ACCREDITATION IS WIDELY RECOGNIZED BY THE ILAC AGREEMENTS
Pressure tests
Resistance to combined cyclic pressure (liquid or air) and thermal cycles (-40 to +180°C), fluid circulation, vibration coupling, etc.
Electrical tests
Surface / volume resistivity, contact and isolation resistance, dielectric strength.Voltage Proof Test.Electrostatic charge dissipation.Detection of power line disturbances (1 µs).Splash water test (with or without dust / or NaCl; cycling parts).
Cleanliness tests (inspection of particle contamination)
Carried out in accordance with ISO 16232 on fluid system components such as parts designed for air, cooling liquid, fuel or oil systems.ONCE extracted, gravimetric (ISO 16232-6), microscopic (16232-7) and nature of particles (ISO 16232-8) analysis.
cOnTAcT
SGS SERCOVAM
cOnTAcT
SGS SERCOVAMBP 10 - 33611 CESTAS - FRANCEt. +33 (0) 5 57 97 02 33 f. +33 (0) 5 57 83 53 [email protected] www.sercovam.com
EnvIROnmEnTAL TESTS pERFORmAncE TESTS
www.SgS.cOm
N°3
27 F
ebru
ary
2015
© S
GS
Gro
up M
anag
emen
t SA
– 2
015
– A
ll rig
hts
rese
rved
- S
GS
is a
reg
iste
red
trad
emar
k of
SG
S G
roup
Man
agem
ent
SA