truly italian - arcalux · 60w qt32 e27 halogen lamp 26w tc-t gx24 d-3 compact fluorescent lamp 20w...
TRANSCRIPT
TRULY ITALIAN
ADDENDUM 08
Index
mini franco 5 norma 11 melrie 17 aluminium cube 21
double arm 29cassiopeaon surface 25
tower led 43 luca led 45 mini ada led 47
mini alfia led 49 andromeda led 51 juanita led 55manuel led 53
led 35
cube led 41
4
5
Well appreciated for its design and versatility Franco Family grows with the introduct of Mini Franco so to offer more and more an effective indoor and outdoor lighting for walls, ceilings, floors, promenades, walkways, pedestrian areas and pathways. Furthermore, its versatility (it can be mounted on walls, poles or ceilings) makes Mini Franco the ideal fitting to light architectural details.
MINI FRANCO
km-l
ightetic
a
8
Mini Franco Z1
DescriptionOutdoor luminaire for installation on wall or on pole. Configuration: phospho-chromatised and polyester powder coated die-cast aluminium structure (three colours available), pure aluminium optics, tempered extra-clear glass diffuser, silicone gasket and stainless steel screws. Electrical components are housed into the body. The luminaire is equipped with a graduated coated aluminium fixing plate allowing a precise installation on the wall. To be full cut-off (Z1 – no light pollution) the luminaire must be installed with a downward emission.
Versions availableOptics:- fixed asymmetric opticInstallation:- on wall through a fixing base - on pole- on wall through a 600 mm braket Diffuser:- transparent glass (VT)
Light sources 60W QT32 E27 halogen lamp 26W TC-T GX24 d-3 compact fluorescent lamp 20W PGJ5 metal halide lamp (electronic ballast)
DimensionsWidth: 175 mmHeight: 105 mmLength: 305 mm (distance from the wall including the fixing plate)Glass: 200x130 mm
Technical featuresProtection Rating: IP65 • In compliance with EN 60598-1 standardsClass of insulation: I
InstallationWiring through a M16 metal cable gland (Ø <10mm cables). Outdoor use requires suitable flexible cables assuring the watertightness of the cable gland. The pole version has to be installed using a dedicated bracket (to be ordered separately)Accessories on request:- 600 mm bracket for installation on wall- poles with base or in ground
Colours Available
.2 aluminium .3 anthracite .4 black
MINI FRANCO MINI FRANCO PALO
Ø 60
Ø 120
500
/900
175
105
305
200
130
600
110
96
S
MINI FRANCO MINI FRANCO PALO
Ø 60
Ø 120
500
/900
175
105
305
200
130
600
110
96
S
MINI FRANCO MINI FRANCO PALO
Ø 60
Ø 120
500
/900
175
105
305
200
130
600
110
96
S
The fitting is equipped with 1 cable input
Protection against impact.
IK 07 - 02,00 joule
Full cut-off luminaire (no light pollutio)
Wall fitting
Floor installation
Installation on pole
9
MINI FRANCO
160114QT 32 60W E27
88ARM 600 mm
1005H 500 mm
1009H 900 mm
1105H 500 mm
1109H 900 mm
POLES WITH BASE
POLES IN GROUND
163714CDM-Tm 20W PGJ5Electronic ballast
166314TC-T 26W Gx24 d-3
IAA/D45
IAA/A45
IAA/A60-A65
IRR/R63
HRPAR/PAR30S
HMG/QR11
HRGI QR CBC 35
HRGS PAR PAR 16
HSG QT 9
HSG QT 12
HSGT QT32
HDG QT-DE12
HDG QT-DE12 75mm
HE QT 18
FCH T-R 32
FSD TC
FSD TC-L
FSQ TD-D FSQ TC-DEL
FSM TC-T FSMH TC-TEL
FBT TC-TSE
FSD TC-F
MD HIT-DE
MT HIT G12
MT HIT G8,5
MR HI-PAR 20
MR HI-PAR 30L
QE HME
FD/T5
IAA/D45
IAA/A45
IAA/A60-A65
IRR/R63
HRPAR/PAR30S
HMG/QR11
HRGI QR CBC 35
HRGS PAR PAR 16
HSG QT 9
HSG QT 12
HSGT QT32
HDG QT-DE12
HDG QT-DE12 75mm
HE QT 18
FCH T-R 32
FSD TC
FSD TC-L
FSQ TD-D FSQ TC-DEL
FSM TC-T FSMH TC-TEL
FBT TC-TSE
FSD TC-F
MD HIT-DE
MT HIT G12
MT HIT G8,5
MR HI-PAR 20
MR HI-PAR 30L
QE HME
FD/T5
BRACCIO MINI FRANCO definitivo
620
110
96
BRACCIO MINI FRANCO definitivo
620
110
96
cd / Klm
C00 / C180 C90 / C270
mMedlux
1.00 682.00 173.00 8
4.00 4
Maxlux
1894721
128 3
α = 60.2°+ 57.7°
120
180
240
60
β = 40.8° +32.1°
β
5.00α
cd / Klm
C00 / C180 C90 / C270
mMedlux
1.00 942.00 233.00 10
4.00 6
Maxlux
2576429
1610 4
α = 57.4°+ 55.8°
80
120
160
40
β = 48.1° +32.3°
β
5.00α
cd / Klm
C00 / C180 C90 / C270
m Medlux
1.00 1062.00 263.00 124.00 7
Maxlux
38195422415 4
α = 37.1°+ 80.4°
120
180
240
60
β = 59.5° +22.8°
β
5.00α
11
De
sign
ed
by
Gig
ett
o
NORMA LITENORMA
Norma family goes through its range of floodlights of different dimensions with a new “light” base. The high degree of protection (IP65) allows installation on most extreme outdoor settings and, thanks to the discreet design, it can also be easily included on indoor projects for shops, showrooms, museums and shopping centres.
12
Mini Norma
DescriptionOutdoor projector for installation on wall, soil or pavement. Configuration: phospho-chromatised and polyester powder coated die-cast aluminium structure (four colours available) equipped with tempered transparent glass diffuser and silicone gasket. Stainless steel screws allow to fix the light emission unit at the desired position. Versions available Diffuser: tempered transparent glass (VT)Beam: standard beam: 60°
Light sources 50W PAR16 GZ10 dichroic lamp 50W/12V QRCBC51 GU5,3 dichroic lamp (remote transformer to be ordered) Dimensions:80 mm x 175 mm (base lenght: 65 mm)
Technical featuresProtection Rating: IP65 • In compliance with EN 60598-1 standardsClass of insulation: I
Installation Wiring through a M16 cable glands (Ø <10mm cables). Outdoor use requires suitable flexible cables assuring the watertightness of the cable gland. The luminaire can be installed on soil thanks to a dedicated plastic picket (to be ordered separately). Accessory on request: plastic picket for installation on soil.
Colours Available
.1 white .2 aluminium .3 anthracite .4 black
Floor installation
Wall light
Protection against impact.
IK 07 - 02,00 joule
The fitting is equipped with 1 cable input
The feeding transfor-mer (230V/12V) for low voltage must be installed on remote position.
NORMA LITEMINI NORMA LITE
76 60
80
Ø 140
Ø 8045 50
65
175 290
250
Ø 89120
70
135
265
Ø 80
100
100
13
MINI NORMA
902891PAR 16 50W/230V GZ10
IAA/D45
IAA/A45
IAA/A60-A65
IRR/R63
HRPAR/PAR30S
HMG/QR11
HRGI QR CBC 35
HRGS PAR PAR 16
HSG QT 9
HSG QT 12
HSGT QT32
HDG QT-DE12
HDG QT-DE12 75mm
HE QT 18
FCH T-R 32
FSD TC
FSD TC-L
FSQ TD-D FSQ TC-DEL
FSM TC-T FSMH TC-TEL
FBT TC-TSE
FSD TC-F
MD HIT-DE
MT HIT G12
MT HIT G8,5
MR HI-PAR 20
MR HI-PAR 30L
QE HME
FD/T5
IAA/D45
IAA/A45
IAA/A60-A65
IRR/R63
HRPAR/PAR30S
HMG/QR11
HRGI QR CBC 35
HRGS PAR PAR 16
HSG QT 9
HSG QT 12
HSGT QT32
HDG QT-DE12
HDG QT-DE12 75mm
HE QT 18
FCH T-R 32
FSD TC
FSD TC-L
FSQ TD-D FSQ TC-DEL
FSM TC-T FSMH TC-TEL
FBT TC-TSE
FSD TC-F
MD HIT-DE
MT HIT G12
MT HIT G8,5
MR HI-PAR 20
MR HI-PAR 30L
QE HME
FD/T5
903391QR CBC 51 50W/12V GU5,3Remote transformer to be ordered
45PICKET FOR GROUND
TRANSFORMERS
17trasform. 200W230V/12V 50HzIP 67
18trasform. 300W230V/12V 50HzIP 67
16trasform. 50W230V/12V 50HzIP 67
10035
86
90 115
125 145
90 115
Ø 114
Ø 140
Ø 140
116
�/ 66
10035
86
90 115
125 145
90 115
Ø 114
Ø 140
Ø 140
116
�/ 66
10035
86
90 115
125 145
90 115
Ø 114
Ø 140
Ø 140
116
�/ 66
cd / Klm
C00 / C180
mMaxlux
Medlux
1.00 750 472
2.00 188 118
3.00 83 52
4.00 47 29
5.00 30 19
α = 17.0°+ 17.0°
α
1000
1500
2000
2500
500
cd / Klm
C00 / C180
mMaxlux
Medlux
1.00 1784 1121
2.00 446 280
3.00 198 125
4.00 112 70
5.00 71 45
α = 19.0°+ 19.0°
α
1000
1500
2000
2500
500
35°
36°
14
Norma
DescriptionOutdoor projector for installation on wall, soil or pavement. Configuration: phospho-chromatised and polyester powder coated die-cast aluminium structure (four colours available) cylindrical light-emission unit equipped with tempered transparent glass diffuser and silicone gasket. Stainless steel screws allow to fix the light emission unit at the desired position. Versions available Diffuser: tempered transparent glass (VT) Beam: standard beam: 60°
Light sources 100W QT32 E27 halogen lamp 75W PAR30S E27 halogen lamp (to mount this lamp remove the resident reflector) 26W TC-T Gx24q-3 halogen lamp (electronic ballast) Dimensions:140 mm x 290 mm (base lnght: 80 mm)
Technical featuresProtection Rating: IP65 • in compliance with EN 60598-1 standardsClass of insulation: I
Installation Wiring through a M20 cable glands (Ø<13mm cables). Outdoor use requires suitable flexible cables assuring the watertightness of the cable gland. The luminaire can be installed on soil thanks to a dedicated plastic picket (to be ordered separately). Accessory on request: plastic picket for installation on soil.
Colours Available
Floor installation
Wall use
The fitting is equipped with 2 cable input
Protection against impact.
IK 07 - 02,00 joule
.1 white .2 aluminium .3 anthracite .4 black
NORMA LITEMINI NORMA LITE
76 60
80
Ø 140
Ø 8045 50
65
175 290
250
Ø 89120
70
135
265
Ø 80
100
100
15
NORMA
916391TC-T 26W Gx24 q-3Electronic ballast
* For the use of this light source remove the reflector
IAA/D45
IAA/A45
IAA/A60-A65
IRR/R63
HRPAR/PAR30S
HMG/QR11
HRGI QR CBC 35
HRGS PAR PAR 16
HSG QT 9
HSG QT 12
HSGT QT32
HDG QT-DE12
HDG QT-DE12 75mm
HE QT 18
FCH T-R 32
FSD TC
FSD TC-L
FSQ TD-D FSQ TC-DEL
FSM TC-T FSMH TC-TEL
FBT TC-TSE
FSD TC-F
MD HIT-DE
MT HIT G12
MT HIT G8,5
MR HI-PAR 20
MR HI-PAR 30L
QE HME
FD/T5
IAA/D45
IAA/A45
IAA/A60-A65
IRR/R63
HRPAR/PAR30S
HMG/QR11
HRGI QR CBC 35
HRGS PAR PAR 16
HSG QT 9
HSG QT 12
HSGT QT32
HDG QT-DE12
HDG QT-DE12 75mm
HE QT 18
FCH T-R 32
FSD TC
FSD TC-L
FSQ TD-D FSQ TC-DEL
FSM TC-T FSMH TC-TEL
FBT TC-TSE
FSD TC-F
MD HIT-DE
MT HIT G12
MT HIT G8,5
MR HI-PAR 20
MR HI-PAR 30L
QE HME
FD/T5
IAA/D45
IAA/A45
IAA/A60-A65
IRR/R63
HRPAR/PAR30S
HMG/QR11
HRGI QR CBC 35
HRGS PAR PAR 16
HSG QT 9
HSG QT 12
HSGT QT32
HDG QT-DE12
HDG QT-DE12 75mm
HE QT 18
FCH T-R 32
FSD TC
FSD TC-L
FSQ TD-D FSQ TC-DEL
FSM TC-T FSMH TC-TEL
FBT TC-TSE
FSD TC-F
MD HIT-DE
MT HIT G12
MT HIT G8,5
MR HI-PAR 20
MR HI-PAR 30L
QE HME
FD/T5
910191QT 32 100W E27PAR 30S 75W E27*
45PICKET FOR GROUND
cd / Klm
C00 / C180 C90 / C270
m Medlux
1.00 75
2.00 19
3.00 8
4.00 5
Maxlux
16742
19
10
7 3
α = 52.7°+ 23.5°
80
120
160
200
40
β = 43.4° +44.5°
β
5.00
α
cd / Klm
C00 / C180 C90 / C270
m Medlux
1.00 61
2.00 15
3.00 7
4.00 4
Maxlux
14636
16
9
6 2
α = 45.9°+ 31.4°
40
60
80
100
20
β = 40.5° +41.6°
β
5.00
α
cd / Klm
C00 / C180
mMaxlux
Medlux
1.00 2401 1518
2.00 600 379
3.00 267 169
4.00 150 95
5.00 96 61
α = 14.7°+ 14.7°
α
1000
1500
2000
2500
500
30°
17
Melrie is our solution to the need of minimising the visual impact of ligh-ting fixtures on walls without reducing the emission of light. The high versa-tility is due to the wide range of light sources available and to the possi-bility to use mono and double light emission so to satisfy any needs.
MELRIE
De
sign
ed
by
Gig
ett
o
18
MELRIE
200
100
110
Melrie
DescriptionRound luminaire for outdoor surface installation on wall. Configuration: polycarbonate structure with phospho-chromatised and polyester powder coated die-cast aluminium covering (four colours available), expanded silicone gasket and stainless steel screws. A dedicated treatment on the diffuser ensures an even and optimal light emission from the whole surface: suitable for night lighting of residential areas.
Versions AvailableEmission: unidirectional or bidirectionalDiffuser: highly performing transparent polycarbonate
Light Source 40W E14 halogen or incandescent lamp 13W TC-D G24d-1 compact fluorescent lamp 1 or 2 per 6W T2 Gx53-1 Micro-lynx compact fluorescent lamp
DimensionsHeight: 100mmLength: 200mmWidth: 110mm
Technical FeaturesProtection Rating: IP65 in compliance with EN 60598-1 standardsClass of insulation: II
InstallationWiring through two rubber cable holders for 0<10mm cables. Outdoor use requires suitable flexible cables assuring the watertightness of cable holders. Installation is allowed through two dedicated holes (184mm pitch) not affecting the sealed unit.
Colours Available
.1 white .2 aluminium .3 anthracite .4 black
The fitting is equipped with 2 cable input
Protection against impact.
IK 09 - 10,00 joule
65
Wall use
19
MELRIE
481121QT26 40W E14
480521TC-D 13W G24d-1
481021T2 6W/230V Gx53-1
481122QT26 40W E14
480522TC-D 13W G24d-1
483922T2 2x6W/230V Gx53-1
cd / Klm
C00 / C180 C90 / C270
mMedlux
1.00 8
2.00 23.00 14.00 1
Maxlux
30
8321 0
α = 44.3°+ 29.4°
30
45
60
15
β = 64.1° +65.7°
β
5.00α
cd / Klm
C00 / C180 C90 / C270
mMedlux
1.00 15
2.00 43.00 24.00 1
Maxlux
56
14642 1
α = 54.6°+ 25.9°
30
45
60
15
β = 53.5° +64.2°
β
5.00α
cd / Klm
C00 / C180 C90 / C270
mMedlux
1.00 8
2.00 23.00 14.00 0
Maxlux
31
8321 0
α = 37.3°+ 43.8°
80
120
160
40
β = 67.9° +67.4°
β
5.00α
cd / Klm
C00 / C180 C90 / C270
mMedlux
1.00 8
2.00 23.00 14.00 1
Maxlux
30
832
1 0
α = 44.3°+ 29.4° β = 64.1° +65.7°
β
5.00α
cd / Klm
C00 / C180 C90 / C270
mMedlux
1.00 15
2.00 43.00 24.00 1
Maxlux
56
1464
2 1
α = 54.6°+ 25,9° β = 53.5° +64.2°
β
5.00α
cd / Klm
C00 / C180 C90 / C270
mMedlux
1.00 7
2.00 23.00 14.00 0
Maxlux
31
832
1 0
α = 37.3°+ 43.8° β = 67.9° +67.9°
β
5.00α
21
De
sign
ed
by
Barb
ara
Ba
lest
reri
Aluminium Cube is the natural evolution of Steel Cube, maintaining its elegant shape that make it suitable for both indoor and outdoor installation. Aluminium Cube offers a soft and comfortable light emission thanks to the use of an halogen lamp and new led technology both with warm and cool white.
ALUMINIUM CUBE
22
Aluminium Cube
DescriptionOutdoor luminaire for surface installation on wall. Configuration: phospho-chromatised and polyester powder coated die-cast aluminium structure and cover, expanded silicone gasket and moulded sandblasted glass.
Versions Available Diffuser: moulded sandblasted glass
Light Source 60W QT14 G9 halogen lamp 4W/230V led module (cool 5500°K and warm 3000°K white)
DimensionsLength: 139mmHeight: 139mmWidth: 97mm
Technical FeaturesProtection Rating: IP54 • In compliance with EN 60598-1 standardsClass of insulation: I
Installation Wiring through a rubber cable holder for Ø<10mm cables. Outdoor use requires suitable flexible cables assuring the watertightness of the cable holder.
Colours Available
.1 white .2 aluminium .3 anthracite .4 black
139
139 97
95
The fitting is equipped with 1 cable input
Wall fitting
Protection against impact.
IK 07 - 02,00 joule
23
ALUMINIUM CUBE
8068231 COOL WHITE LED 4W/230V
8070231 WARM WHITE LED 4W/230V
802723QT14 60W G9
cd / Klm
C00 / C180 C90 / C270
25
50
75
100
cd / Klm
C00 / C180 C90 / C270
40
80
120
160
200
25
Are
s c
on
ce
pt
A square pillar for installation of surface is the brand new accessory of Cassiopea range. Cassiopea square-version becomes now the ideal tool for designers needing the light effect of a recessed luminaire but without altering the installation surface (e.g. old town paving and squares)
CASSIOPEA ON SURFACE
26
CASSIOPEA ON SURFACE
400
400
135
On surface
The fitting is equipped with 2 cable input
Protection against impact.
IK 09 - 10,00 joule
Cassiopea
DescriptionRecessed luminaire for outdoor installation on ground where recessing depth are limited (up to 120mm). Configuration: phospho-chromatised and polyester powder coated die-cast aluminium structure, die-cast inner frame, tempered transparent glass with silkscreen border and stainless steel finish frame, moulded silicone gasket and stainless steel screws.
Versions AvailableStructure:- 310mm-side square structure with fixed symmetric or asymmetric optic Diffuser:- transparent glass with silkscreen border (VT)
Light Sources 35W or 70W HIT G8,5 metal halide lamp 18W TC-D G24d-2 compact fluorescent lamp 26W TC-D G24d-3 compact fluorescent lamp
Technical FeaturesProtection Rating: IP67 • In compliance with EN 60598-1 standardsClass of insulation: I
Installation Wiring through two M20 plastic cable glands (Ø <13mm cables). Outdoor use requires suitable flexible cables assuring the watertightness of the cable gland. Installation re-quires a dedicated “box for installation” (to be ordered separately). Accessories on request: - aluminium box for installation on surface
Colours Available (recessed luminaire)
Color available (box for installation on surface)
.0 inox
117
310
310
�/ 25
0
Ø 3
10
Ø 2
50
117
.1 white .2 aluminium .3 anthracite .4 black
27
CASSIOPEA ON SURFACE
91BOX FOR INSTALLATION ON SURFACE400 x 400 H 135
29
Are
s c
on
ce
pt
The new accessory for Franco and Maxi Franco is a double bracket suitable for Ø 102 mm poles, making the range a suitable element to meet the needs of designers in charge of urban and residential lighting (avenues, roads, squares, parking areas)
DOUBLE ARM
32
Franco and Maxifranco double-arm for pole ø 102BRACCI FRANCO
Ø102
180
108
360
108
Ø102
Ø102
500
195
195
1000
Ø102
33
FRANCO AND MAXIFRANCO DOUBLE-ARM
89DOUBLE BRAKET 500 MM FOR POLE Ø 102
BRACCI FRANCO
1000
360
90DOUBLE BRAKET 180 MM FOR POLE Ø 102
BRACCI FRANCO
1000
360
34
35
De
sign
ed
by
Barb
ara
Ba
lest
rieri
Ares is proud to introduce a range of products equipped with highly devel-oped LED modules. With an output of 80-90 lumens per Watt (lm/W) these new models can easily replace, as far as the emission is concerned, small halogen and fluorescent lamps (3 LEDs for 1W each emit the same flux as a 15W halogen lamp or a 5W compact fluorescent lamp)In recent years LEDs are widely avail-able and, thanks to high efficacy, efficiency and safety, are more and more present in lighting. The decision to equip modules with remote low tension (24V) transformers is our an-swer to the increasing need for safer and longer lasting products, suitable for areas were mains voltage is highly forbidden. What is more, parallel con-nection allows an easy-to-make in-stallation.CUBE family hosts a single LED that can be directly connected to the mains voltage (230V) and is avail-able in the colours white (5500K) and warm white (3000K).ANDROMEDA family is equipped with a 36 LEDs module working at 24V DC.All other families host modules made up of 1W LEDs on MCPCB layer fitted with voltage to current converter.
LED
40
Cube
DescriptionOutdoor luminaire for surface installation on wall. Configuration: phospho-chromatised and polyester powder coated die-cast aluminium cover or brushed stainless steel (AISI 316L) cover, expanded silicone gasket and moulded sandblasted glass.
Versions Available Diffuser: moulded sandblasted glass
Light Source 4W/230V led module (cool 5500°K and warm 3000°K white)
DimensionsLength: 139mmHeight: 139mmWidth: 97mm
Technical FeaturesProtection Rating: IP54 • In compliance with EN 60598-1 standardsClass of insulation: I
Installation Wiring through a rubber cable holder for Ø<10mm cables. Outdoor use requires suitable flexible cables assuring the watertightness of the cable holder.
Colours Available
The fitting is equipped with 1 cable input
Wall fitting
139
139 97
95
Protection against impact.
IK 07 - 02,00 joule
.0 inox
41
CUBE
8068001 COOL WHITE LED 4W/230V
8070001 WARM WHITE LED 4W/230V
cd / Klm
C00 / C180 C90 / C270
40
80
120
160
200
42
Steel Tower
DescriptionOutdoor luminaire on post for installation on ground. Configuration: brushed stainless steel (AISI 316L) external structure with phospho-chromatised and polyester powder coated die-cast aluminium inner module fixed to the moulded sandblasted glass dif-fuser, expanded silicone gasket and A2 stainless steel screws. The light source is housed into the cubic diffuser.
Versions Available Diffuser: moulded sandblasted glass
Light Source 1 Led module (cool 5500°K and warm 3000°K white) 4W/230V
DimensionsSquare base: 163mm sidePost: - square section: 100mm side- height: 372mm or 672 mm
Technical FeaturesProtection Rating: IP65 • In compliance with EN 60598-1 standardsClass of insulation: I
Installation Wiring through a rubber cable holder for Ø<10mm cables. Outdoor use requires suitable flexible cables assuring the watertightness of the cable holder.
Colours Available
The fitting is equipped with 1 cable input
Bollard light67
2
372
372
�/ 16
3
�/ 10
0
Protection against impact.
IK 07 - 02,00 joule
.0 inox
43
STEEL TOWER
8068591 COOL WHITE LED 4W/230V
8070591 WARM WHITE LED 4W/230V
8068601 COOL WHITE LED 4W/230V
8070601 WARM WHITE LED 4W/230V
8068581 COOL WHITE LED 4W/230V
8070581 WARM WHITE LED 4W/230V
cd / Klm
C00 / C180 C90 / C270
40
80
120
160
200
cd / Klm
C00 / C180 C90 / C270
40
80
120
160
200
cd / Klm
C00 / C180 C90 / C270
40
80
120
160
200
44
Luca
DescriptionOutdoor luminaire for installation on wall. Configuration: phospho-chromatised and polyester powder coated die-cast aluminium structure (four colours available) with silicone gasket and tempered transparent glass. Electrical components are housed into the body.
Versions available Diffuser: tempered transparent glass (VT) Light emission: unidirectional: one emission bidirectional: two opposite emissions
Light sources Unidirectional version: 3 led module 3W (cool 5500°K white - warm 3000°K white - blue)Bidirectional version: 2x3 led module 3W (cool 5500°K white - warm 3000°K white - blue)
Dimensions:Length: 80mmHeight: 250mmWidth: 80mm + 45mm (fixing base)
Technical featuresProtection Rating: IP54 • In compliance with EN 60598-1 standardsClass of insulation: II
Installation Wiring through a rubber cable holder for Ø<10mm cables. Outdoor use requires suitable flexible cables assuring the watertightness of the cable holder.
Colours Available
.1 white .2 aluminium .3 anthracite .4 black
The fitting is equipped with 1 cable input
Wall fitting
155
250
�/ 80
125
Protection against impact.
IK 07 - 02,00 joule
45
LUCA
7073213 COOL WHITE LED 3W 100-240VElectronic power supply included
7056422x3 WARM WHITE LED 6W 100-240VElectronic power supply included
7075213 BLUE LED 3W 100-240VElectronic power supply included
7056213 WARM WHITE LED 3W 100-240VElectronic power supply included
7073422x3 COOL WHITE LED 6W 100-240VElectronic power supply included
7075422x3 BLUE LED 6W 100-240VElectronic power supply included
cd / Klm
C00 / C180 C90 / C270
mMaxlux
Medlux
1.00 566 364
2.00 141 91
3.00 63 40
4.00 35 23
5.00 23 15
α = 9.0°+ 9.6° β = 8.8° +9.2°
βα
1500
3000
4500
6000
7500
60°
90°
30°
cd / Klm
C00 / C180 C90 / C270
mMaxlux
Medlux
1.00 563 362
2.00 141 90
3.00 63 40
4.00 35 23
5.00 23 14
α = 9.0°+ 9.6° β = 8.8° +9.2°
βα
90°
120°
60°
46
Mini Ada
DescriptionOutdoor luminaire for installation on wall. Configuration: phospho-chromatised and polyester powder coated die-cast aluminium structure (four colours available) with silicone gasket and tempered transparent glass. Electrical components are housed into the body.
Versions available Diffuser: tempered transparent glass (VT) Light sources: single lamp double lampLight emission: unidirectional: one emission bidirectional: two opposite emissions Light sources Single lamp: 3 led module 3W (cool 5500°K white - warm 3000°K white - blue)Double lamp: 2x3 led module 3W (cool 5500°K white - warm 3000°K white - blue)
Dimensions:Length: Ø 70mmHeight: 220mm Width: Ø 70mm + 50mm (fixing base)
Technical featuresProtection Rating: IP54 • in compliance with EN 60598-1 standardsClass of insulation: II
Installation Wiring through a rubber cable holder for Ø<10mm cables. Outdoor use requires suitable flexible cables assuring the watertightness of the cable holder.
Colours Available
.1 white .2 aluminium .3 anthracite .4 black
The fitting is equipped with 1 cable input
Wall fitting
140
120
Ø 7
022
0
Protection against impact.
IK 08 - 05,00 joule
47
MINI ADA
6373213 COOL WHITE LED 3W 100-240VElectronic power supply included
6356422x3 WARM WHITE LED 6W 100-240VElectronic power supply included
6356213 WARM WHITE LED 3W 100-240VElectronic power supply included
6375213 BLUE LED 3W 100-240VElectronic power supply included
6373422x3 COOL WHITE LED 6W 100-240VElectronic power supply included
6375422x3 BLUE LED 6W 100-240VElectronic power supply included
cd / Klm
C00 / C180 C90 / C270
mMaxlux
Medlux
1.00 566 364
2.00 141 91
3.00 63 40
4.00 35 23
5.00 23 15
α = 9.0°+ 9.6° β = 8.8° +9.2°
βα
1500
3000
4500
6000
7500
60°
90°
30°
cd / Klm
C00 / C180 C90 / C270
mMaxlux
Medlux
1.00 563 362
2.00 141 90
3.00 63 40
4.00 35 23
5.00 23 14
α = 9.0°+ 9.6° β = 8.8° +9.2°
βα
90°
120°
60°
48
Mini Alfia
DescriptionRecessed luminaire for outdoor installation on wall. Configuration: phospho-chromatised and polyester powder coated die-cast aluminium structure with coated die-cast aluminium (four colours available) finish frame, moulded silicone gasket and tempered transparent glass.
Versions AvailableDiffuser:- transparent glass (VT)
Light Sources 2 led module (cool 5500°K and warm 3000°K white - blue) 2W 100-240V
DimensionsSquare frame: 120mm sideRecessing depth (including box for installation): 60mm
Technical FeaturesProtection Rating: IP54 • In compliance with EN 60598-1 standardsClass of insulation: II
InstallationWiring through two M16 plastic cable glands (Ø<10mm cables). Outdoor use requires suitable flexible cables assuring the watertightness of the cable gland. Installation re-quires a dedicated “box for installation” (to be ordered separately). Accessories on request: polypropylene box for recessed installation
Colours Available
.1 white .2 aluminium .3 anthracite .4 black
The fitting is equipped with 2 cable input
Recessed wall fitting
120
120
584
Protection against impact.
IK 08 - 05,00 joule
49
MINI ALFIA
8168002 COOL WHITE LED 2W 100-240VElectronic power supply included
90 115
125 145
90 115
Ø 114
Ø 140
Ø 140
60�/ 120 59BOX FOR INSTALLATION120 x 120 H 60 mm
90
115
125
145
90
115
Ø 1
14
Ø 1
40
Ø 1
40
60�/ 12
0
8170002 BLUE LED 2W 100-240VElectronic power supply included
8164002 WARM WHITE LED 2W 100-240VElectronic power supply included
cd / Klm
C00 / C180
500
H=0,40m
1000
1500
2000
2 31 40
0.0
0.5
0.5
0.50.5
0.5
0.51
6
50 50
Andromeda
DescriptionRecessed or surface mounted rectangular luminaire for outdoor installation on ground or on wall, expressly designed to host led-module light source. Configuration: fibreglass reinforced polypropylene structure with bright stainless steel finish frame, moulded sili-cone gasket and polycarbonate diffuser (opal or transparent). Andromeda is capable of withstanding pedestrian traffic.
Versions AvailableDiffuser:- transparent polycarbonate - opal polycarbonate
Light Sources 36-led module (white or blue light) 24V d.c. (Electronic power supply has to be ordered separately)
DimensionsRectangular frame: 337x60mm Recessing depth (including box for installation): 60mm
Technical FeaturesProtection Rating: IP67 • In compliance with EN 60598-1 standardsClass of insulation: III
Installation Wiring through two M16 plastic cable glands (Ø <10mm cables) already equipped with a piece of cable. Outdoor use requires suitable flexible cables assuring the water-tightness of the cable gland. Installation requires a dedicated “box for installation” for recessed installation and a dedicated “fixing box” for surface installation (both to be ordered separately). It is important to provide a >300mm gravel layer or a drain system (if the box is installed on a concrete surface) to ensure good drainage and to avoid water stagnation. Accessories on request: - polypropylene box for recessed installation - stainless steel fixing box for surface installation
Colours Available
An efficient drainage of water with a layer of gravel should be forseen - 30 cm
The fitting must not be installed in hollow areas.
The fitting is equipped with 2 cable input
.0 inox
Recessed wall fitting
337
330
50
6057
3
According toCEI EN 60598-2-13
The power supply (220/240V) must be installed on remote position
51
ANDROMEDA
83666636 WHITE LEDS MODULE 24V d.c.Remote electronic power supply to be ordered
83667736 WHITE LEDS MODULE 24V d.c.Remote electronic power supply to be ordered
TRANSPARENT DIFFUSER
OPAL DIFFUSER
337
5963
337
6060
337
5963
337
6060
61BOX FOR INSTALLATION337 x 63 H 59 mm
66BOX IN STAINLESS STEELFOR WALL USE
86POWER SUPPLY FOR LED MODULE220/240V 20W 24Vd.c. IP68Electronic power supply
100
81
74
87POWER SUPPLY FOR LED MODULE220/240V 10W 24Vd.c.Electronic power supply
3320
123
83686636 BLUE LEDS MODULE 24V d.c.Remote electronic power supply to be ordered
83687736 BLUE LEDS MODULE 24V d.c.Remote electronic power supply to be ordered
cd / Klm
C00 / C180 C90 / C270
1.51.00.50.0
0.0
0.5
38
3
3
H=0,20m
1500
1500
3000
3000
cd / Klm
C00 / C180
1.51.00.50.0
0.0
0.5
1
0.5
0.51
0.5
0.5
1
2.50.5
12.5
0.53.5
80 160 240 320
H=0,20m
52
Manuel
DescriptionLow-profile recessed luminaire for outdoor installation on ground or wall. Configuration: nylon structure with stainless steel or coated die-cast aluminium (four colours available) finish frame, tempered sandblasted glass, moulded silicone gasket and stainless steel screws. Manuel is capable of withstanding light vehicular traffic.
Versions availableLow-profile structure for installation on ground or wall.Finish frame:- stainless steel or coated aluminium (4 colours available) finishingDiffuser:- sandblasted glass (VS)
Light sources 3 led module (cool 5500°K and warm 3000°K white or blue light) 3W/24V (electronic power supply to be ordered)Accessory on request: 24V/20W power supply for led module IP68
DimensionsFinish frame: 120mm sideRecessing depth (including box for installation) : 70mm
Technical featuresProtection Rating: IP67 • In compliance with EN 60598-1 standardsClass of insulation: Led version: III
InstallationWiring through two M16 plastic cable glands (Ø <10mm cables) placed at two op-posite sides of the luminaire. Outdoor use requires suitable flexible cables assuring the watertightness of the cable gland. Installation requires a dedicated “box for installation” (to be ordered separately). It is important to provide a >300mm gravel layer or a drain system (if the box is installed on a concrete surface) to ensure good drainage and to avoid water stagnation. Accessory on request: fiberglass reinforced technopolymer box for installation
Colours Available
.1 white .2 aluminium .3 anthracite .4 black.0 inox
An efficient drainage of water with a layer of gravel should be forseen - 30 cm.
The fitting is equipped with 2 cable input
The fitting must not be installed in hollow areas.
Recessed wall fitting
84
570
�/ 12
0
Maximum load(vehicular traffic): 1500 kg 20 km/h
Protection against impact.
IK 09-10,00 joule
According toCEI EN 60598-2-13
The power supply (220/240V) must be installed on remote position
53
MANUEL
5373283 COOL WHITE LED 3W/24V d.c.Remote electronic power supply to be ordered
5373233 COOL WHITE LED 3W/24V d.c.Remote electronic power supply to be ordered
5356283 WARM WHITE LED 3W/24V d.c.Remote electronic power supplyto be ordered
5375283 BLUE LED 3W/24V d.c.Remote electronic power supply to be ordered
5356233 WARM WHITE LED 3W/24V d.c.Remote electronic power supply to be ordered
5375233 BLUE LED 3W/24V d.c.Remote electronic power supply to be ordered
70BOX FOR INSTALLATION121 x 121 H 70
10
Ø 121
�/ 95
�/ 121
75
86POWER SUPPLY FOR LED MODULE20W/24V d.c. IP68Electronic power supply
100
81
74
cd / Klm
C00 / C180 C90 / C270
600
1200
1800
2400
0,0
0,5
1,0
1,5
2,0
-2,0 -1,5 -1,0 -0,5 0,0 0,5 1,0 1,5 2,0
22
10
d=0,20m
cd / Klm
C00 / C180 C90 / C270
600
1200
1800
2400
0,0
0,5
1,0
1,5
2,0
-2,0 -1,5 -1,0 -0,5 0,0 0,5 1,0 1,5 2,0
22
10
d=0,20m
ALUMINIUM FRAME
54
Juanita
DescriptionLow-profile recessed luminaire for outdoor installation on ground or wall. Configuration: nylon structure with stainless steel or coated die-cast aluminium (four colours available) finish frame, tempered sandblasted or transparent glass, moulded silicone gasket and stainless steel screws. Juanita is capable of withstanding light vehicular traffic.
Versions availableDiffuser: sandblasted glass (VS) – transparent glass on request (VT)Finish frame designs:- “all light”- “directional louver”- “visor”- “three windows” Light sources 3W/24V led module (cool 5500°K and warm 3000°K white or blue light) (remote transformer to be ordered separately)Accessory on request: 24V/20W power supply for led module (IP68)
DimensionsFinish frame: Ø 120mm Recessing depth (including box for growing) : 70mm
Technical featuresProtection Rating: IP67 • in compliance with EN 60598-1Class of insulation: led module: III
InstallationWiring through two M16 plastic cable glands (Ø <10mm cables) placed at two op-posite sides of the luminaire. Outdoor use requires suitable flexible cables assuring the watertightness of the cable gland. Installation requires a dedicated “box for installation” (to be ordered separately). It is important to provide a >300mm gravel layer or a drain system (if the box is installed on a concrete surface) to ensure good drainage and to avoid water stagnation. Accessory on request: fibreglass-reinforced technopolymer box for installation
Colours Available
Ø 1
20
5 2
Ø 1
30
Ø 110 Ø 110
6265
8484
.1 white .2 aluminium .3 anthracite .4 black.0 inox
An efficient drainage of water with a layer of gravel should be forseen - 30 cm.
The fitting is equipped with 2 cable input
According toCEI EN 60598-2-13
The fitting must not be installed in hollow areas.
Recessed wall fitting
Maximum load(vehicular traffic):1500 Kg - 20 Km/h
Protection againstimpact.
IK 09-10 ,00 joule
The electronic power supply must be installed on remote position.
55
JUANITA
7973283 COOL WHITE LED 3W/24V d.c.Remote electronic power supplyto be ordered
7973233 COOL WHITE LED 3W/24V d.c.Remote electronic power supply to be ordered
50BOX FOR INSTALLATION Ø 113 H 72 mm
Ø 92
7210
Ø 113
Ø 92
7210
Ø 113
86POWER SUPPLY FOR LED MODULE20W/24V d.c. IP68Electronic power supply
100
81
74
7956283 WARM WHITE LED 3W/24V d.c.Remote electronic power supply to be ordered
7975283 BLUE LED 3W/24V d.c.Remote electronic power supply to be ordered
7956233 WARM WHITE LED 3W/24V d.c.Remote electronic power supply to be ordered
7975233 BLUE LED 3W/24V d.c.Remote electronic power supply to be ordered
cd / Klm
C00 / C180 C90 / C270
600
1200
1800
2400
0,0
0,5
1,0
1,5
2,0
-2,0 -1,5 -1,0 -0,5 0,0 0,5 1,0 1,5 2,0
22
10
d=0,20m
cd / Klm
C00 / C180 C90 / C270
600
1200
1800
2400
0,0
0,5
1,0
1,5
2,0
-2,0 -1,5 -1,0 -0,5 0,0 0,5 1,0 1,5 2,0
22
10
d=0,20m
ALUMINIUM FRAME
Copyright © 2008 by Ares S.r.l.
We are not responsible for printing errors, wrong dimensions, descriptions or technical data.The company reserve the right to amend all products herein detailed, any time and without prior notice. Unauthorized reproductions and copies are prohibited A
RES
srl
via
le d
ell’
art
igia
na
to, 2
4 B
ern
are
gg
io -
MIL
AN
O -
ITA
LY
Tel.
+39
039
690
0892
Fa
x +
39 0
39 6
9018
55
e-m
ail:
are
sill@
tin.it
www.aresill.it