truck bodies &...
TRANSCRIPT
ModernFlat high gloss GRP seamless panelsSingle piece seamless flooringModern round corner capsWater and abrasion proofRound corner profiles improves aerodynamicsInternally Sealed to avoid leakage
ImprovedBetter temperature retention & recoveryReduced weightBetter load carrying capacitySaves fuel charges Increased internal space (3.5 cm additional)Integrated Spot lights for Truck safety
EfficientCan be customized to suit any size & vehicleThermal barrier No maintenance requiredCan be fitted with solar powered panel refrigerationIntegrated door frame with hingesMultipurpose floor for forklift application
www.tsscuae.com | [email protected]
TSSC has long been a pioneer in the manufacture of isothermal bodyworks. With over 55 years of proven expertise in the �eld of insulated panels, the company employs the latest construction techniques to manufacture insulated vehicle bodies to the highest standards. From small to large, mid-temperature to deep-frozen, TSSC can build refrigerated vehicle bodies for pickups, trucks, vans and trailers to speci�c requirements.
Insulated Dry BoxTruck Body
2100
4300
1001900100
1004100
100
Dimensions
Specifications
Accessories
4500mm (L) X 2100mm (W) X 2100mm (H)
Construction CFC free polyurethane foam.
Density 40 - 42 kg/ m3
Thickness 100mm overall
Cladding Internal : 0.6mm PPGI Ribbed Sheet.External : 0.7mm PPGI Plain Sheet.
Floor 50 mm thick insulated panels reinforced with wooden spacers,covered with 18 mm WBP plywood.
Rear Door One (1) DOUBLE LEAF rear door will be installed with complete accessories.
Side Door One (1) SINGLE LEAF rear door will be installed with complete accessories.
Door Accessories Doors are fitted with heavy duty rubber gaskets, along with robust stainless steel hardware.
Steel Base Steel base with side guards will be provided.
S.S. Drainpipes One (1no.) stainless Steel drain pipe shall be installed in the floor.
Lighting Two (2nos.) LED lights
Crash Guard Crash guard fitted on both sides according to road regulations.
Folding Steps One (1no.) of folding step.
Mud Guards Four (4nos.) of mud guards.
Reflectors Twelve (12 nos.) of triangle reflectors
NOTE: Panel Thickness: 50mm upto 100mm.“All dimensions are in mm”
Eutectic are used to maintain a certain temperature inside the insulated body for long periods even after the unit is disconnected from a power supply. Eutectic plates are the preferred choice where temperatures need to be reduced down to -30°C. They �nd their ideal use where very low temperatures must be maintained and frequent stops are not required.
A single Eutectic Refrigeration System with a 5HP Semi-Hermetic Britzer compressor with 8 nos. of stainless steel plates plates. Temperature: Plate temperature will be -40O C degree and box temperature will be -27OC degree. Trolley: Eight (8) sets of trolleys will be provided. Working 380 Volt / 50 Hz. / 3 Phase. European plug 5 holes. Ecological gas R 404 A.
External Dimensions
Eutectic System
Insulated Panels 4250mm (L) x 2200mm (W) x 2200mm (H)
Wall Thickness 150mm
Floor Smooth GRP �nish on 18mm marine plywood
Door 4 hatch type door on each sides and double leaf rear door (total 9 doors).
Side door size 600mm x 1200mm (W x H)
Lights The box is equipped with suitable number of recessed waterproof internal
lights activated from the drivers cabin.
Curtain One set of PVC curtain strips with stainless steel hook sections will be installed
in front of each door, covering the full span of the door to reduce in�ltration.
Eutectic RefrigerationIce Cream Boxes
Mobile Clinic Box
Dimensions Customizable to meet client requirements
Construction CFC free polyurethane foam insulated panels.
Density 42 kg3 / m
Thickness 80mm
Floor 50 mm thick insulated panels reinforced with wooden spacers.Covered with 18 mm WBP plywood and finished with GRP finish.
Rear Door Double leaf rear door with heavy duty extruded aluminum door frame,and special designed profiles.GI hinges |Container Door locks fitted with specially designed rubbergasket |No rivets or bolts.
Specifications
Reefer Trailer
External – 13600mm (L) x 2660mm (W) x 2600 mm (H)Internal – 13400mm (L) x 2460mm (W) x 2580 mm (H)
CFC free polyurethane foam insulated panels
42 kg/ m3
100 mm Overall | 120mm for Floor
One (1) DOUBLE LEAF rear door will be installed for the box.
Heavy Duty Fork Lift Operation
Doors are fitted with heavy duty rubber gaskets, along withrobust Stainless Steel hardware.
One (1) set of PVC strips with stainless steel hook section shall be installed in front of the door, covering the full span of the door, in order to reduce infiltration
Internal & External 2.5mm Thick GRP High Gloss smooth plain finish
Inulated panels will be made in one piece for each side in order to increase the rigidity of the box. (5 pieces) insulated panels will be reinforced with a steel frame for long-term durability.
120 mm thick insulated panels with Steel Plate reinforced with wooden spacers, covered with 25 mm WBP plywood and finished with 4.5mm thick grey color GRP Coating with 300mm Aluminum chequered skirting.
NOTE:“All dimensions are in mm” Thickness: 100mm.
Dimensions
Insulation
Density
Thickness
Rear Door
Floor Construction
Door Accessories
PVC Curtains
Cladding
Construction
Floor
3x9 tons BPW/SAF (Germany) "Air" suspension axle
6 nos. 22.5" disc rims
6 +1nos. 385/65 x R 22.5" Bridgestone
Wabco or (Germany) Twin line air brakes, acting on all wheels with 'S' cam actuation. Two double acting Diaphragm brake chambers per axle. Service & emergency Relay valves. Automatic load sensing valve Air reservoir
Mudguards & Mudflaps
Basket type spare wheel carrier to accommodate two tires
Rear bumper
Reflecting sign at the rear
8 nos. twist locks suitable for
2x20' container
1x40' container
Grit blasted to S.A.2.5One coat of primer and top coat of high gloss
Two speed Landing legs Jost(Germany)
++GF or JOST 2/ 3.5 dia. to SAE standard (Germany)
7 way quick release connector, Pair of 24 volts rear Light Units, comprising tail lieght, brake and signal lights fitted with high intensity bulbs /Aspockor equivalent
Axle/Suspension
Rims
Tyres
Brakes
Landing gear
King pin
Electrics
Painting System
Specifications Trailer Chassis Specifications
Accessories
Chillers & FreezersRefrigerated Truck Bodies
Dimensions 4300mm (L) X 2100mm (W) X 2100mm (H)
Insulation Rigid injected CFC free polyurethane foam.
Density 42 kg/ m3
Thickness 100mm overall
Cladding Internal : 0.5mm PPGI Sheet with nylon protective film with ribs.External : 0.7mm PPGI Sheet with nylon protective film with without ribs.
Floor 100mm thick insulated panels reinforced with wooden spacers, covered with 18 mm WBP plywood & finished with aluminium chequered plate. PU, GRP as per TSSC standard.
Construction Inulated panels will be made in one piece for each side in order to increase the rigidity of the box. (5 pieces) insulated panels will be reinforced with a steel frame for long-term durability.
Rear Door One (1) DOUBLE LEAF rear door will be installed for the box.
Side Door One (1) SINGLE LEAF side delivery door will be installed for the box.
Door Accessories Doors are fitted with heavy duty rubber gaskets, along with robust Stainless Steel hardware.
Will be installed including aluminium profiles & corners, aluminium angles, rivets and silicone.
One (1 no.) will be installed at front of the box for cleaning purpose.
Two (2 no.) concealed type ceiling lights will be installed for the box.
Side guard to be provided as per traffic rules and safety of the box.
To be installed on the top of the driver’s cabin.
Cooling Unit As per client's requirements
Specifications
Accessories
S.S. Drain Pipes
Lighting
Crash Guard
Cat Walk
Mobile Workshop
Dimensions
Construction
Density
Thickness
Floor
Customizable to meet client requirements
CFC free polyurethane foam insulated panels..
42 kg/ m3
50mm
4mm MS Plate.
Rear Door Aluminium shutter door with complete locking mechanism
Side Door Aluminium shutter door with complete locking mechanism.
Fitted Accessories Water tank | Welding machine with generator | Air Compressor | Working Table.
Tail Lift DHOLLANDIA 1.0 Ton with aluminium platform (OPTIONAL).
Specifications
Refrigerated Truck
TSSC is harnessing the power of the sun to help the transport refrigeration industry keep cool en route.
With over 50 years of proven expertise in the manufacture of isothermal bodyworks, TSSC manufactures insulated vehicle bodies to the highest standards and o�ers innovative and cost-e�cient solutions for the transport refrigeration industry.
Our recent addition to the innovative range is the use of solar panels to power the refrigeration units. This application is suitable for refrigerated trucks & trailers designed to maintain refrigerated conditions of the unit, which must be able to operate at both freezer (0°C) and refrigeration (5°C) conditions.
Considerably less energy
Low maintenance due to fewer moving parts
Less noise pollution
Elimination of emissions associated with diesel exhausts
Engine failure does not effect the cooling unit
At present, most chilling equipment is powered by diesel generators. These have high energy demands and maintenance costs, as well as environmental impacts both in terms of emissions, which contribute to the greenhouse e�ect, and noise levels.
In comparison, the solar-powered refrigeration unit o�ered by TSSC uses considerably less energy than a standard diesel-driven unit and by improving the vehicle’s insulation and design we enable to keep it operating throughout the year.
Features of the Solar Powered Refrigeration Units
Solar Powered
Shutter TrucksWate r Bo t t l e Ca r r y i ng T r uck
Beverage Body (Water Bottle Carrying Box) with Shutter Doors on 6 mtr. ChassisDimensions 6000mm (L) x 2200mm (W) x 2000mm (H)
Shutter Single skin �at shutter of 1350mm (W) x 1700mm (H) = 8 nos.
Partition Each compartment will be separated by 50 x 25 x 2mm RHS at 100cm height.
1 no. of trolley box.
Air De�ector Air de�ector made of �ber glass shall be �xed above the driver’s cabin.
Racks 8 nos. of 32 bottle racks will be provided inside the body.
Rear Bumper Combination of rear closed bumper at the same width of the container with
100mm X 50mm X 6mm C channel will be provided.
Side Crash Guard 80 x 40 x 3mm RHS tube as per speci�cation of the tra�c department.
Re�ectors Re�ectors will be �xed as per the tra�c rules & regulations.
Std. Accessories MS mudguard with mud �ap. Superior quality �orescent stickers for run in crash
guard.
Painting Internal 2 coats of enamel primer & external 1 coat of enamel primer. 2 coats of �nal
coating will be done with enamel white colour same as cabin colour.
Shutter : On parking & driving sideCrash Guard : 4no. on each openingFinish Color : White colorTrolley Stand : 1no.
NOTE: All dimensions are in “mm” other wise speci�ed.
Dubai Investment Park - UAEP.O Box : 77031Tel : +971 -4- 8850474Fax : +971 -4- 8850343
Sharjah - UAEP.O Box : 1818Tel : +971 -6- 5341344Fax : +971 -6- 5341686
Abu Dhabi - UAEP.O Box : 43135Tel : +971 -2- 6768748Fax : +971 -2- 6773726
Riyadh - KSAP.O Box : 3860Tel : +966 11 499 2800Fax : +966 11 499 2021
Truck Bodies &Semi-Trailers
www.tsscuae.com | [email protected]