trp international, llc
TRANSCRIPT
1
Products
TRP International, LLC.Throughout this catalog a TRP Service Mark appears next to those products manufactured by TRP.
CONTENTS
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
GVS Agricultural Division . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Butt Weld Style Spindles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Hot Forged Integrated Flange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Hot Forged Straight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Bar Stock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Hot Forged Integrated Flange Drop Spindles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Round Bar Stock Spindles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Square Bar Stock Spindles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Hot Forged Drop Boat Trailer Spindle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Brake Flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Spindle Fasteners & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Dust Caps – Rubber Plug. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Tapered Roller Bearings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Grease Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Brake Drums. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Idler Hubs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Hydraulic Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Electric Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Leaf Springs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-21U-Bolt Tie Plates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-23Spring Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Shackle Links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Cast Equalizers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Spring Hangers – 13/4" Wide Springs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Steel Fabricated Equalizers – 2" Wide Springs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Spring Hangers – 2" Wide Springs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
10k General Duty Steel Fabricated Equalizers – 2.5" Wide Springs. . . . . . . . . . . 3110k General Duty Spring Hangers – 2.5" Wide Springs . . . . . . . . . . . . . . . . . . . . . . . . . 30
Suspension Fasteners. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32U-Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Mobile Home Axle Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34-35
Leaf Spring Bushings – Mobile Home Rim Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Shock Absorber – Shock Tie Plates & Mounting Brackets . . . . . . . . . . . . . . . . . . . . . 37
TruWeld-6 Weld Wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48Secondary Custom Operations – Custom Manufactured Components . . . . . . 49International Supplier Partners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Subsidiary Profiles
TRP International, LLC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Company Profile
TRP DistributionGVS Technologies, LLC
Reference Guide for Hub Components & Axle Components. . . . . . . . . . . . 38-47
Formed in 1992, TRP International, LLC. is a diversified manufacturing and distribution corporation. At TRP we talk about “filling in the white space” as a way of growing the company. This strategy allows us to expand our product offerings, participate in new market segments, and maintain a competitive
position while staying close to the things we know. We accomplish this by introducing new products, enhancing current product lines, partnering with other companies or by making acquisitions. Whatever path we take, our goal is to provide our customers with an expansive line of quality products distributed on schedule at competitive prices with responsive and professional service.
Through the TRP group of companies and global partners we provide products to a variety of ground transportation equipment industries. By leveraging our expertise in the areas of Engineering, Manufacturing, International Trade and Distribution combined with a commitment to ongoing investments in technology and people, our objective is to share in the success of our customers by helping them maximize their efficiency while minimizing costs.
Engineering – Our engineering staff has experience in various design and manufacturing environments including leaf springs, tapered roller bearings, closed-die forgings, metal stampings, and CNC machining. Our resources include professional mechanical, quality, and metallurgical engineers. With these skills we are striving every day to improve the overall cost and quality of the products we offer. TRP has a focus on continuous improvement that is reflected in investments in computer aided design (CAD) software, and a coordinate measuring machine (CMM). These tools help our engineers assist you in making the right choice for your components.
International Trade – With over 22 years of international trade experience and qualified TRP personnel working through liaison offices in Italy and China we have the expertise necessary to communicate, consult, coordinate and execute the many facets of importing products to North America from abroad.
Distribution – With state of the art technology for order processing and fulfillment combined with strategically located distribution centers, we can effectively serve the requirements of customers from coast to coast in the U.S., as well as Canada and Mexico. Our constant attention to logistics and evaluation of carrier performance and pricing, assures the most efficient, cost effective shipping methods resulting in faster delivery and lower total product costs.
TRP International, LLC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ISO 9001:2008
2
Manufacturing – The TRP companies take pride in the capability and efficiency of each piece of equipment used to manufacture our products. Recent investments in a new Programmable CMM, three new Live Tool Lathes, a 400mm Horizontal Machining Center, a 500mm Horizontal Machining Center, as well as a new Drill and Tap Machining Center are just a sampling of the investments made for the improvement of manufacturing. We strive to incorporate lean principles to keep costs down in our production facilities. Our charter is to "find waste and eliminate it". Each facility takes pride in shipping quality products and maintains a quality system that builds the framework for verifying that we meet customer specifications.
3
TRP Distribution is a major supplier of axle and suspension components to light and medium duty trailer axle manufacturers, trailer parts distributors, and trailer builders. It functions as the marketing and sales organization for the TRP subsidiary company, GVS Technologies, LLC. In addition TRP Distribution is the exclusive distributor in North America of leaf springs for Rockwell American Manufacturing, USA and steel forgings for Ghioni & Valaperta, Italy.
With strategically located distribution centers throughout the United States the products are closer to the customer helping to minimize transit times and shipping costs as well as shortening the material planning cycle. Customer requirements are fulfilled utilizing a state of the art networked system linking the distribution centers. This enables us to process orders efficiently, with greater accuracy, and usually within one business day.
Whether through domestically manufactured products from TRP International's subsidiary company or products sourced internationally through our global partners, TRP Distribution has a significant commitment to inventory. This commitment assures the customer of their requirements being met in the time frame desired.
CUSTOM FORGING DIVISION – Ghioni & Valaperta is located in the small town of Erba in Northern Italy. A manufacturer of custom closed die steel forgings, G&V ships forgings throughout the world. This family owned business of over 40 years supplies forgings and finished components to world-class industrial companies including GKN, Daimler-Chrysler, Audi and Volkswagen. G&V has positioned itself as a world-class forging supplier, combining unique technology and equipment with highly skilled and experienced employees. Together, G&V and TRP International have forged a secure business relationship dating back to 1992. G&V selected TRP as its North American distributor and product representative because of TRP’s solid reputation in the trailer industry. Through combined sales and engineering efforts supported by a broad domestic manufacturing and distribution base, TRP and G&V supply unparalleled quality forgings to customers in North
America. TRP and G&V value added capabilities grew in 1999 with the acquisition of GVS Technologies, a production machining business located in Elkhart, Indiana. The facility is equipped with highly capable, state of the art machinery that is always upgraded which allows GVS to consistently improve the quality of each component produced.
TRP Distribution
D I S T R I B U T I O N
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ISO 9001:2008
GVS Technologies, LLC ISO 9001:2008
Executive
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PROCESS CAPABILITIES
G)•
REPRESENTATIVE PRODUCTS
s /
4
GVS Technologies is our world class production machining company located in Elkhart, Indiana. The team at GVS has many years of valuable experience in machining a wide variety of axle and suspension components for the light and medium duty trailer industry. Axle spindles are the major product line ranging in diameters up to 5 inches and lengths exceeding 27 inches. These spindles can be machined from straight and drop hot forgings or hot rolled and cold drawn bar stock using the most advanced CNC lathes, live tool lathes, vertical mills, horizontal machining centers, and heat induction bending.
Spindles can be machined complete with an assortment of nut anti-rotation devices (e.g. cotter pins, D-flats, slots) lubrication passages and fittings, and welded brake flanges. GVS is also capable of machining to customer supplied custom designs. Control of raw materials and continuous monitoring and improvements in production processes insure consistent product quality.
• TappingCounter BoringPortingInduction Heating and Bending
••
•
5
Agricultural Division. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GVS Agricultural Division is a supplier of spindles, hubs, bearings, grease seals, dust caps and other related components to the agricultural market.
By combining our domestic manufacturing capabilities at GVS Technologies (see opposing page) with our international trade expertise at TRP International, we provide a broad range of high quality, competitively priced components to the agricultural market. Through our strategically located distribution center in Elkhart, IN. we have the product in stock and available for immediate shipment. Spindle products are manufactured to specific customer requirements and generally require a 2-3 week lead time to produce. Our exceptional staff of customer service personnel are prepared to assist with order entry, shipping logistics, and directing related customer inquiries to the appropriate individuals.
While we are committed to carrying an extensive inventory of the most popular items, we have the resources in place to work with customer supplied design products as well. Please direct your inquiries to your GVS Agricultural Division sales executive or customer service contact.
The above images are representative of the products available through GVS Agricultural Division. Information pertaining to the individual product specifications, packaging details, and part numbers can be viewed in a separate catalog available through your sales executive or customer service contact.
6
SPINDLE CAPACITY A B C D E FDIMENSIONSDESCRIPTION
BT16#84#84#84#42#42#42
PART NO.
1,250 lb.1,7501,7501,7503,5003,5004,000
1.95"1.95"1.95"2.55"2.45"2.45"2.93"
2.26"2.26"2.26"2.26"2.74"2.74"2.74"
6.35"6.35"6.05"6.35"8.25"8.25"8.61"
1.50"1.72"1.72"1.72"2.13"2.25"2.25"
1.062"1.376"1.376"1.376"1.749"1.749"1.749"
1.062"1.062"1.062"1.062"1.249"1.249"1.249"
H
2.34"2.45"2.34"3.00"3.00"3.00"3.50"
SP-HF-84BT16 SP-HF-84L SP-HF-84S SP-HF-8455 SP-HF-42L-213SP-HF-42L-225 SP-HF-8K
HOT FORGED
SPINDLE CAPACITY A B C D E FDIMENSIONSDESCRIPTION
BT8BT8BT16BT16
PART NO.
1,000 lb.1,0001,2501,250
1.31"1.31"1.31"1.31"
N/A1.63"N/A
1.63"
5.96"6.68"5.96"6.68"
1.25"1.25"1.50"1.50"
0.999"0.999"1.062"1.062"
0.999"0.999"1.062"1.062"
H
1.75"1.75"1.75"1.75"
SP-HF-BT8SP-HF-BT8LSP-HF-BT16SP-HF-BT16L
BAR STOCK
BUTT WELD STYLE SPINDLES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
UNIT WT.
3.20 lb.3.40 3.00 4.00 7.407.40
10.00
UNIT WT.
2.00 lb.2.252.252.50
SPINDLE CAPACITY A B C D E FDIMENSIONSDESCRIPTION
#84#84#42#42
PART NO.
1,750 lb.1,7503,5003,500
H
SP-HF-IF-84L SP-HF-IF-8455 SP-HF-IFB-42L-213 SP-HF-IFB-42L-225
HOT FORGED INTEGRATED FLANGE
UNIT WT. I
1.95"2.55"2.45"2.45"
3.00"3.00"3.25"3.25"
6.35"6.35"8.25"8.25"
1.72"1.72"2.13"2.25"
1.376"1.376"1.749"1.749"
1.062"1.062"1.249"1.249"
2.45"3.00"3.00"3.00"
5.36"5.46"7.25"7.25"
3.29 lb.3.977.317.31
7
PARTNUMBER
SP-TT-IF-175
SP-TT-175AF
SP-UT-IFB-300-213
SP-UT-IFB-300-225
SP-UTH-400F
DIMENSIONS
1.95"
2.45"
2.45"
2.45"
2.93"
A B
2.77"
2.77"
2.64"
2.64"
3.00"
C
5.36"
5.36"
7.25"
7.25"
7.55"
D
1.72"
1.72"
2.13"
2.25"
2.25"
F
1.062"
1.062"
1.249"
1.249"
1.249"
DESCRIPTION
3500# Axle, 4" Drop For 2-3/8" Tube w/ Flange
3500# Axle, 4" Drop For 3" Tube w/ Flange
7000# Axle, 4" Drop For 3" Tube w/ Flange
8000# Axle, 4" Drop w/ Forged Flange For 3-1/2" Tube
UNITWT.
6.63 lb.
8.45
12.25
12.25
17.10
S
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
E
1.376"
1.376"
1.749"
1.749"
1.749"
7000# Axle, 4" Drop For 3" Tube w/ Flange
- “B” straight
**Call for availability and lead time on spindles.
UT-300
TT-175
SP-TT-175AF has a welded flange.*
8
SPINDLETYPE CAPACITY A B C D E F
DIMENSIONSDESCRIPTION
C
A
B D E F M
C
A
B D E F M
Type 1 Type 2
ROUND BAR STOCK SPINDLES
PART NO.
SP-125BT8SP-125BT16SP-150BT8SP-150BT16SP-17584SP-20084SP-22542
BT8BT16BT8BT16#84#84#42
1111222
1,000 lb.1,250 1,0001,2501,7501,7503,500
1.25"1.25"1.50"1.50"1.75"2.00"2.25"
3.37"3.37"3.37"3.37"3.37"3.37"6.00"
8.25"8.25"8.25"8.25"8.25"8.25"
11.00"
1.23"1.23"1.25"1.48"1.72"1.72"2.23"
0.999"1.062"0.999"1.062"1.376"1.376"1.749"
0.999"1.062"0.999"1.062"1.062"1.062"1.249"
A
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
UNIT WT.
2.25 lb.2.252.753.004.005.008.00
* Call for availability and lead time on spindles.
9
.
.
SPINDLETYPE CAPACITY A B C D E F
DIMENSIONSDESCRIPTION
Type 1 Type 2
PART NO.
SP-150BT8-SQ SP-150BT16-SQ SP-20484-SQ
w/seal ringSP-35684-SQ SP-50642-SQ
w/seal ring
C
A
B D E F M
C
A
B D E F M
SQUARE BAR STOCK SPINDLES
A
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
UNIT WT.
8
* Call for availability and lead time on spindles.
10
CUSTOM SPINDLE OPTIONS Welding . Welding
Note: (O nly - ) . . . . .
ORIGINAL
PARTNUMBER
SP-TB-175F
DIMENSIONS
A B C D E F G H I L
0
J K
B
I
H
E
F
C
J L M
A
TB
-175
D
K
G
PatentsPending
TB
-175
Camber = 1.5
88.5
The 2"x 2" or 2"x 3" tube is welded to the flat surface of the leg of the spindle. This spindle allows you to achieve a drop from 1.75" to 4.75."
AXLE PLACEMENT
4.75"
1.75"
TB
-175
TB
-175
AVAILABLE DROPS
HOT FORGED DROP BOAT TRAILER SPINDLE
- thread (M) with .190" cotter pin hole.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
UNITWT.
7.75 lb.
11
", ",
B
AD
EC
Type 1
A
CE
D
B
Type 2
Type 3 / 4
B E
DA
C
PARTNUMBER
DIMENSIONS REF.NO.
BOLTCIRCLE
CASEQTY.A B C ED
TYPE
PFL-41.30 PFL-41.51 PFL-41.64 PFL-41.75 PFL-42.27 PFL-52.31 PFL-52.75 PFL-53.12PFL-52.31-31 PFL-52.53 PFL-52.53-31PFL-42.31 PFL-42.56 PFL-42.96PFLD-42.96 PFL-43.12 PFL-43.53
11111222222333433
3.75"3.75"3.75"3.75"3.75"4.25"4.25"4.25"4.25"4.25"4.25"4.75"4.75"4.75"4.63"4.75"4.75"
3.75"3.75"3.75"3.75"3.75"4.44"4.44"4.44"4.44"4.44"4.44"4.75"4.75"4.75"4.63"4.75"4.75"
1.30"1.51"1.64"
"2.27"2.31"2.75"3.12"2.31"2.53"2.53"2.31"2.56"2.96"2.96"3.12"3.53"
0.23"0.25"0.25"0.25"0.25"0.25"0.25"0.25"0.31"0.25"0.31"0.37"0.37"0.37"0.26"0.37"0.37"
3.00"3.00"3.00"3.00"3.00"3.25"3.25"3.25"3.25"3.25"3.25"4.50"4.50"4.50"3.87"4.50"4.50"
4.00"4.00"4.00"4.00"4.00"3.87"3.87"3.87"3.87"3.87"3.87"5.28"5.28"5.28"4.96"5.28"5.28"
—4-294-344-164-124-6Q4-6T4-6—————————
2,000 pc.1,500 1,500 4,000 4,000 4,000 4,000 1,000 1,0001,0001,000
550550550550550550
BRAKE FLANGES
All Type 2 flanges are available with brake studs pressed in.Add “B” to end of flange part number.Studs are 3/8"- 24 x 7/8".
CASEWT.
1,500 lb.1,230 1,155 2,920 2,480 3,200 3,040
800 900900900
1,0501,0501,0501,0501,0501,050
UNITWT.
0.75 lb.0.82 0.77 0.73 0.62 0.80 0.76 0.80 0.900.900.901.901.901.901.901.901.90
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12
SPINDLE FASTENERS & ACCESSORIES
2,000 pc.
PARTNUMBER
SIZEDIMENSIONS BOX
QTY.A
FA-CP175 1A
COTTER PIN
1,000 pc.
PARTNUMBER
DIMENSIONS BOXQTY.A B C
FA-SW100 1.67" 1.00"C
A
B
FLAT ROUND SPINDLE WASHER
0.61"0.27"0.65"0.62"0.59"0.75"
1,000 pc.1,0001,0001,000
500500
PARTNUMBER
DIMENSIONS BOXQTY.A B C
WR-SS125WR-SS138WR-SS150WR-SS175WR-SS213WR-SS225
1.22"1.38"1.50"1.72"2.13"2.24"
1.07"1.16"1.20"1.39"1.85"1.87"
STAINLESS STEEL WEAR RINGS
C
A
B
SPINDLE
BTBTBT#84#42#42
0.88" 0.13" 950 pc.
PARTNUMBER
DIMENSIONS BOXQTY.A B C D
FA-DW100 1.67" 1.00"B
D
A
C
FLAT D-WASHER
0.55" 300 pc.
PARTNUMBER
THREADDIMENSIONS BOX
QTY.A B C
FA-SN100 1"-14 N.F. 1.46" 1.00"
SPINDLE NUTS
A C
B
0.40" 2,500 pc.
PARTNUMBER
DIMENSIONS BOXQTY.A B C
FA-TW100 1.57" 1.00"C
A
B
FLAT BENT TANG WASHER
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10 lb.10 10 12
6 7
BOXWT.
35 b.
BOXWT.
50 lb.
BOXWT.
45 lb.
BOXWT.
42 lb.
BOXWT.
12 lb.
BOXWT.
5,000 pc.
PARTNUMBER
SIZEDIMENSIONS BOX
QTY.
FA-ZERK 1/4"- 28 TAPER
GREASE ZERK
32 lb.
BOXWT.
0.21"
A B C
0.56" 0.26"
A
B
C
13
DUST CAPS – RUBBER PLUG
1.18"DC-RP
A
B
B
A
Rubber Lube Plug fits 1.18" Lubed Dust Cap Hole
C
RubberLube Plug
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DIMENSIONS
A B CDESCRIPTION
1.78"1.99"1.99"2.33"2.45"2.45"2.72"2.72"
1.30"
1.34"1.52"1.28"1.52"
N/AN/A
1.18"N/AN/A
N/A1.18"
BOXQTY.
pc.
430230
BOXWT.
lb.
N/A
N/A21-3
21-41N/A21-1
21.4221-3921-43
REF.NO.
PARTNUMBER
DC-178DC-200DC-200LDC-233DC-250DC-250LDC-275DC-275L
REGULAR DUST CAP
LUBED DUST CAP
1 3/4" Dust Cap2" Dust Cap2" Lubed Dust Cap2 1/3" Dust Cap2 1/2" Dust Cap2 1/2" Lubed Dust Cap2 3/4" Dust Cap2 3/4" Lubed Dust Cap
1.18"
14
TAPERED ROLLER BEARINGS
L-44649L-44643L-44610L-68149L-68111L-68110LM-67048LM-6701025580255201512315245*LM-11749*LM-11710
LM-11949LM-11910*LM-12749*LM-12710*LM-12711
LM-48548LM-48510LM-501349*LM-501310* JL-69349* JL-69310
14125A14276*HM-218248
HM-218210*HM-212049
HM-21201128580*28520
285210247502420JM-205149JM-205110JM-511946JM-511910
PARTNUMBER
1.0625"1.0000"
—1.3775"
——
1.2500"—
1.7500"—
1.2500"—
0.6875"—
0.7500"—
0.8656"——
1.3750"—
1.6250"—
1.4961"—
1.2500"—
3.5423"—
2.6250"—
2.0000"——
1.2500"—
1.9685"—
2.5591"—
CONE ID.
——
1.9800"—
2.3612"2.3280"
—2.3280"
—3.2650"
—2.4409"
—1.5700"
—1.7810"
—1.7810"1.8100"
—2.5625"
—2.8910"
—2.4803"
—2.7170"
—5.7864"
—4.8125"
—3.5425"3.6250"
—2.6875"
—3.5433"
—4.3307"
CUP OD.CASEQTY.
BOXQTY.
ConeConeCupConeCupCupConeCupConeCupConeCupConeCupConeCupConeCupCupConeCupConeCupConeCupConeCupConeCupConeCupConeCupCupConeCupConeCupConeCup
DESCRIPTION
297 pc.297297184184184184184
5555
120120400450360360350380450128192130150175192108108
10101424555555
55551624
10,692 pc.10,69210,692
6,6246,6246,6246,6246,6241,9801,980 4,320 4,320
14,400 16,200 12,960 12,960 12,600 13,680 16,200
4,608 6,912 4,680 5,400 6,300 6,912 3,888 3,888
360360504864
1,9801,9801,980
1,9801,980
576864
.
* Non-stock items. Minimum order quantities and longer lead time will apply.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BOXWT.52 lb.592747272549255226412350426536544047533860395332401940204534522626
52265234
CASEWT.
1,872 lb.2,124
9721,692
972900
1,764900
1,872936
1,476828
1,8001,5122,3651,3201,9441,4401,6921,9081,3682,1601,4041,9081,1521,440
6841,440
7201,6201,2241,872
936936
1,872936
1,8721,224
*
*
15
GREASE SEALS
1.250"1.500"1.720"1.938"2.125"2.250"
SHAFTDIAMETER
1.979"1.983"2.561"2.506"3.372"3.371"
BOREDIAMETER
1.983"1.987"2.565"2.510"3.377"3.376"
SEALOD.
0.250"0.188"
0.500"0.281"0.375"0.375"
SEALWIDTH
BT8BT16#84M/H#42#42
SPINDLE
*GS-1250SL*GS-1500SL*GS-1719SL*GS-1938SLGS-2125SL
*GS-2250SL
PARTNUMBER
12192VB15191VB
171255VB193502VB
21333VB22333VB
REF.NUMBER
1.250"1.500"1.687"1.720"2.125"2.250"
1.979"1.983"2.561"2.561"3.372"3.371"
1.983"1.987"2.565"2.565"3.376"3.376"
0.250"0.250"0.500"0.500"0.313"0.375"
BT8BT16#84#84#42#42
SHAFTDIAMETER
BOREDIAMETER
SEALOD.
SEALWIDTH SPINDLE
GS-1250DLGS-1500DLGS-1687DLGS-1719DLGS-2125DLGS-2250DL
PARTNUMBER
REF.NUMBER
12192TB15192TB
168255TB171255TB
21333TB22333TB
* Non-stock items. Minimum order quantities and longer lead time will apply.
1.250"1.500"1.687"1.719"2.125"2.230"
1.979"1.983"2.561"2.561"3.371"3.372"
1.986"1.990"2.568"2.568"3.378"3.378"
0.406"0.250"0.500"0.500"0.375"0.375"
BT8BT16#84#84#42#42
SHAFTDIAMETER
BOREDIAMETER
SEALOD.
SEALWIDTH SPINDLE
GS-1250DLRGS-1500DLR
*GS-1687DLRGS-1719DLRGS-2125DLRGS-2250DLR
PARTNUMBER
REF.NUMBER
12194TC15192TC
168255TC171255TC
22333TC
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1,680 pc. 1,680
360 480 300 300
BOXQTY.
1,6801,680
480600300300
BOXQTY.
1,680 360
480 300 300
BOXQTY.
66 lb.
40
2831
BOXWT.
BOXWT.
47 lb.3234343130
66 lb.544039 2831
BOXWT.
pc
1,680 pc.
DOUBLE LIP RUBBER COATED SEALS
SINGLE LIP SEALS
DOUBLE LIP SEALS
*
16
BRAKE DRUMS
PARTNUMBER
DESCRIPTION CASEQTY.
UNITWT.
CASEWT.
1,750 lb. 5 on 4.50" L-68111 L-44610 21.10 lb. 95 pc. 2,100 lb.
1,750 5 on 4.75" L-68111 L-44610 21.10 95 2,100
1,750 5 on 5.00" L-68111 L-44610 21.10 95 2,100
1,750 5 on 5.50" L-68111 L-44610 21.10 95 2,100
RVD-U-5450
RVD-U-5475
RVD-U-5500
RVD-U-5550
RVD-U-6550 1,750 6 on 5.50" L-68111 L-44610 22.00 95 2,190
3,000 6 on 5.50" 25520 15245 31.70 63 2,100
3,500 8 on 6.50" 25520 14276 37.00 54 2,100
RVD-H-655
RVD-H-865
RVD-H-865-916 3,500 8 on 6.50" 25520 14276 37.00 54 2,100
)
.
.
CAPACITY BOLT DIA. INNER RACE OUTER RACE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17
IDLER HUBS
PARTNUMBER
DESCRIPTION CASEQTY.
UNITWT.
CASEWT.
1,000 lb. 4 on 4.00" L-44610 L-44610 16.48 lb. 504 pc. 3,265 lb.
1,250 5 on 4.50" L-44610 L-44610 16.43 680 4,370
RVI-BT-4400
RVI-BT-5450
RVI-U-5450 1,750 5 on 4.50" L-68111 L-44610 17.23 544 4,380
1,750 5 on 4.75" L-68111 L-44610 17.23 512 3,695
1,750 5 on 5.00" L-68111 L-44610 17.23 512 3,695
1,750 5 on 5.50" L-68111 L-44610 19.45 448 4,235
RVI-U-5475
RVI-U-5500
RVI-U-5550
RVI-U-6550 1,750 6 on 5.50" L-68111 L-44610 19.60 324 3,110
3,000 6 on 5.50" 25520 15245 13.74 315 4,326
3,500 8 on 6.50" 25520 14276 17.03 200 3,405
CAPACITY BOLT DIA. INNER RACE OUTER RACE
(RVI-H-865-916 studs are 9/16"-18)
Hubs
RVI-H-655 RVI-H-865 RVI-H-865-916 3,500 8 on 6.50" 25520 14276 17.03 200 3,405
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18
BRAKES AVAILABLE10"x 21/4" 10"x 21/4" 12"x 2" 12"x 2"
Uni-ServoFree BackingUni-ServoFree Backing
HYDRAULIC BRAKES
BK-40715 BK-40716 BK-40715X BK-40716X BK-42028 BK-42029BK-42028X BK-42029XBK-18787 BK-18788 BK-23510 BK-23511
RH, 10" Free Backing, E-coat
LH, 10" Free Backing, E-coat
RH, 10" Free Backing, Dacromet
LH, 10" Free Backing, Dacromet
RH, 12" Free Backing, E-coat
LH, 12" Free Backing, E-coat
RH, 12" Free Backing, Dacromet
LH, 12" Free Backing, Dacromet
RH, 10" Uni-Servo, E-coat
LH, 10" Uni-Servo, E-coat
RH, 12" Uni-Servo, E-coat
LH, 12" Uni-Servo, E-coat
PARTNUMBER DESCRIPTION
CASEQTY.
UNITWT.
156 pc.
156
156
156
117
117
117
117
156
156
117
117
9.59 lb.
9.59
9.59
9.59
14.66
14.66
14.66
14.66
8.49
8.49
13.34
13.34
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The
CASEWT.
1,602 lb.
1,602
1,602
1,602
1,822
1,822
1,822
1,822
1,430
1,430
1,666
1,666
FEATURES
omet: inor
* Individually boxed brakes are available; add a P to the end of the part number.
19
ELECTRIC BRAKES
PARTNUMBER
DESCRIPTION CASEQTY.
UNITWT.
CASEWT.
. . . .
4.10 lb. 420 pc.
168
1,822 lb.BK-7E-01/02 BK-10E-01/02 BK-12E-01/02 BK-10E-01SA/02SABK-12E-01SA/02SA BK-8KE-01/02 BK-10KE-01/02
* Individually boxed brakes are available; add a P to the end of the part number.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LH/RH, 7"x 11/4" Assembly
LH/RH, 10"x 21/4" Assembly
LH/RH, 12"x 2" Assembly
LH/RH, 10"x 21/4" Self-Adjusting Assembly
LH/RH, 12"x 2" Self-Adjusting Assembly
LH/RH, 8K, 121/4"x 33/8", Self-Adjusting Assembly
LH/RH, 10K, 121/4"x 33/8",Self-Adjusting Assembly
12" x 2"
Self-Adjusting 10K, 12 1/4" x 3 3/8"
8K, 12 1/4" x 3 3/8"10" x 2 1/4"
9.88
Self-Adjusting
168
9.60
14.75
18.5618.50
126
81
81
1,732
1,936
1,553
1,547
1,637
2,000
20
PARTNUMBER
DE-041MDE-7216DE-7217DE-7213DE-726DE-729DE-7218DE-113DE-114DE-7227DE-7222DE-7242DE-SW4BDE-7226DE-7223DE-7224DE-7225DE-1764DE-SW3DE-SW4DE-SW5DE-SW6DE-26350DE-26500DE-261000DE-AWS2DE-AWS3DE-AWS4DE-AWS5DE-AWS6DE-AWS7DE-AWS8DE-33611DE-33612DE-33613DE-33617DE-45527
20.00" 20.31 20.38 20.50 23.13 23.13 23.13 23.50 23.50 24.88 25.25 25.25 25.25 25.13 25.25 25.25 25.25 25.25 25.25 25.25 25.25 25.25 26.00 26.00 26.00 26.00 26.00 26.00 26.00 26.00 26.00 26.00 27.00 27.00 27.00 27.00 27.00
3.25"3.383.183.383.633.503.503.503.503.383.183.003.003.133.003.003.003.003.003.003.003.004.134.124.124.254.254.254.254.254.254.253.502.882.883.252.75
1,500 lb. 700
1,000 1,400 1,250 1,750 2,000 1,000 1,400 3,500 1,250 1,750 1,750 3,000 1,500 2,000 2,500 2,900 1,750 2,500 2,950 3,500
350 500
1,000 1,000 1,500 2,000 2,500 3,000 3,500 4,000
750 1,000 2,100 3,000 2,250
9.40 lb. 6.107.009.309.10
11.0012.40
9.3010.7018.30
9.6011.7011.7015.4011.00 12.3015.1017.0011.7013.8016.3019.10
7.009.10
11.109.90
12.0014.00 17.1020.3023.4027.20
9.1010.1014.0022.3017.30
UNA-168,DX-720 UNA-169, X1020 UNA-167UNA-135UNA-216, 1724-3L UNA-170, WAH-4 UNA-113, 545-3L UNA-114, 545-4L UNA-222, 1769UNA-219, SW3B UNA-212, SW4B SW4B, 93184UNA-221UNA-217UNA-220, 1762, SW3 UNA-218, 1763, SW4 UNA-111, 1764, SW5 UNA-220, 1762, 72-24 UNA-218, 1763, 72-25 UNA-111, 1764UNA-223, SW6UNA-121, 26-350, AS2 UNA-122, 25-500, AS3 UNA-124, 26-1000, AS4 UNA-049, AWS2UNA-050, AWS3 UNA-051, AWS4 UNA-052, AWS5 UNA-053, AWS6 UNA-054, AWS7 UNA-055, AWS8 UNA-144, 15327 UNA-141, 20327 UNA-210, 35427 UNA-142, 60627 UNA-234, 45527
3 3 3 4 3 3 4 3 4 6 3 4 4 4 3 3 4 5 3 4 5 6 2 3 4 2 3 4 5 6 7 8 3 3 4 6 5
NUMBEROF LEAVES
FREELENGTH
FREEARCH
CAPACITYPER SPRING
WEIGHTEACH
REFERENCENUMBERS
DOUBLE EYE – 13/4" WIDE Arch
Length
PARTNUMBER
SF-047 SF-013 SF-014 SF-015 SF-432110 SF-433115 SF-434117 SF-434118
24.50" 25.12 25.12 25.12 30.00 30.00 30.00 30.00
4.12" 5.00 5.00 5.00 4.88 4.88 4.88 4.88
1,675 lb.500750
1,000950
1,5002,0002,400
11.00 lb. 5.807.909.50
10.1012.5012.2018.30
UNA-047 UNA-013 UNA-014 UNA-015 UNA-038, WD-2 UNA-039, WF-3 UNA-040, WG-4 UNA-040N, WG-5
3 2 3 4 2 3 4 5
NUMBEROF LEAVES
FREELENGTH
FREEARCH
CAPACITYPER SPRING
WEIGHTEACH
REFERENCENUMBERS
SLIPPER FLAT – 13/4" WIDE
LEAF SPRINGS
Arch
Length
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
200 200 200 200 200 200 200 200 150 200 200 200 200 200 200 200 125 200 200 125 125 200 200 200 200 200 200 125 125 130 125 200 200 200 125 125
SKIDQTY.
250 250 250 200 500 200 150
SKIDQTY.
1,878 lb. 1,220 1,400 1,860 1,820 2,200 2,480 1,860 2,134 2,738 1,920 2,348 2,340 3,080 2,200 2,458 3,014 2,125 2,340 2,760 2,038 2,388 1,400 1,820 2,220 1,972 2,394 2,798 2,134 2,538 3,043 3,400 1,820 2,022 2,800 2,788 2,158
SKIDWT.
2,200 lb. 1,4501,9752,3752,0206,2502,4402,745
SKIDWT.
200 pc.
200 pc.
21
PARTNUMBER
SR-WC1 SR-WC2 SR-WE3 SR-WH4 SR-WI5 SR-028 SR-034 SR-024 SR-029 SR-029N
24.62"24.6224.6224.6224.6232.0032.0032.0032.0032.00
4.50"4.504.504.504.504.254.254.254.254.25
550750
1,0001,200
600800
1,1001,4001,750
4.20 lb. 5.407.809.00
12.107.80
10.9012.4014.4018.30
UNA-176, WC-1 UNA-177, WC-2 UNA-178, WE-3 UNA-179, WH-4 UNA-180, WI-5 UNA-028UNA-034 UNA-024 UNA-029UNA-029N
1234523456
NUMBEROF LEAVES
FREELENGTH
FREEARCH
CAPACITYPER SPRING
WEIGHTEACH
REFERENCENUMBERS
SLIPPER RADIUS – 13/4" WIDE Arch
Length
PARTNUMBER
SH-7229 SH-7230 SH-7231 SH-7232 SH-7232RB SH-7233 SH-E5226 SH-E5115
26.50"26.5026.5026.5026.5026.5026.5029.50
3.18"3.003.063.183.183.003.503.50
1,500 lb.2,0002,5003,5003,5004,0003,4004,300
15.80 lb. 16.4017.6020.4020.5027.0020.5028.70
UNA-229, 60-3T3 UNA-230, 80-3T3 UNA-231, 100-3T3 UNA-232, 120-3T3 120-3T3 RB UNA-233, 140-3T3 UNA-160, 5226 UNA-161, 5115
44455756
NUMBEROF LEAVES
FREELENGTH
FREEARCH
CAPACITYPER SPRING
WEIGHTEACH
REFERENCENUMBERS
SLIPPER HOOK – 2" WIDE Arch
Length
PARTNUMBER
SO-C1 SO-C2 SO-C3 SO-C4 SO-C5 SO-C6 SO-C21.03 SO-C31.03 SO-C41.03 SO-C51.03 SO-C61.03
26.2526.2526.2526.2526.2526.2526.2526.2526.2526.2526.25
3.503.503.503.503.503.503.503.503.503.503.50
8001,3001,7502,3502,8503,5001,3001,7502,3502,8503,500
250 pc.200200200150125200200200150125
8.30 lb. 10.7012.1014.9017.4021.3010.7012.1014.9017.4021.30
UNA-261, C1UNA-262, C-2UNA-263, C-3UNA-264, C-4UNA-265, C-5UNA-211, C-6C-2C-3C-4C-5C-6
23345633456
NUMBEROF LEAVES
FREELENGTH
FREEARCH
CAPACITY PER SPRING
SKIDQTY.
WEIGHTEACH
REFERENCENUMBERS
SLIPPER OPEN – 13/4" WIDE Arch
Length
PARTNUMBER
DE-7240 25.25" 3.00" 3,000 lb. 0.590" Eye 8.70 lb. UNA-115, 72-40, TE-301
NUMBEROF LEAVES
FREELENGTH
FREEARCH
CAPACITYPER SPRING
BUSHINGID.
WEIGHTEACH
REFERENCENUMBERS
MOBILE HOME – 13/4" WIDE Arch
Length
," " "* All specifications given are for reference only. Spring mounting will affect actual capacity. The capacity given above is the
maximum rating per spring.
150 pc.150150125125125125100
SKIDQTY.
250 pc.250200200200200200200200150
SKIDQTY.
2,075 lb. 2,1402,4282,9742,6132,6612,1402,4282,9742,6132,661
SKIDWT.
lb.
2,550
3,375
2,870
SKIDWT.
1,050 lb. 1,3501,5581,8002,4201,5582,1802,4802,9202,745
SKIDWT.
SKIDQTY.
SKIDWT.
440 pc. 3,826 lb.
280 lb.
22
U-BOLT TIE PLATES
PARTNUMBER
SPRINGWIDTH
TUBEDIA.
DIMENSIONS CASEQTY.
REF.NO.A B C D E F
TP-175173TP-175175 TP-200175 TP-200175-T2TP-200175-56TP-238175 TP-238200 TP-300175 TP-300200 TP-300209 TP-350200
1.75"1.752.002.002.002.382.383.003.003.003.50
1.75"1.751.751.751.751.752.001.752.002.002.00
TYPE
22121111111
2.19"2.312.632.632.632.942.943.623.563.564.13
2.19"2.312.382.382.382.312.562.382.592.592.63
3.75"3.754.003.503.503.754.003.754.004.004.00
3.50"3.505.923.505.925.925.925.925.925.927.00
4.80N/
4.804.804.804.804.804.805.69
0.41"0.560.620.560.56 0.56 0.56 0.56 0.56 0.620.69
TP-712-14
———
12-312-412-112-2
21-12-2—
1,000 pc.1,0001,0001,0001,0001,0001,0001,0001,0001,0001,000
Type 1A
0.66"
45
F
C
B
D E
(4 Places)
0.23
Type 2A
0.66"
F
C
B
D
(4 Places)
0.23
CASEWT.
840 lb.840
1,320730
1,3201,4601,5601,4501,5601,5502,870
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Material: High quality pickled and oiled structural steel per ASTM specifications. Available galvanized and with clear or yellow chromate on zinc, call for availability and pricing The specifications and dimensions above are for reference only. Non-stock items. Minimum order quantities and longer lead time will apply.
*
*
23
U-BOLT TIE PLATES (cont.)
PARTNUMBER
SPRINGWIDTH
TUBEDIA.
DIMENSIONS CASEQTY.
REF.NO.A B C D E F
TP-300175R TP-300200-56R TP-500250R TP-500300RTP-500300-81R TP-513250R
2.38"2.382.383.003.005.005.005.005.13
1.75"1.752.001.752.002.503.003.002.50
TYPE
4444
2.88"2.942.883.623.625.775.755.875.94
2.25"2.312.502.352.603.253.883.883.38
3.50"3.753.753.503.755.006.006.005.00
4.75"4.754.755.375.379.009.009.009.00
N/
0.50"0.560.500.560.560.690.690.810.81
—————
12-4912-5312-46
—
2,000 pc.2,0001,0002,0002,000
250 200 200 250
Type 4
CASEWT.
TP-238175-50R TP-238175R TP-238200R
2,420 lb.2,2001,1002,2002,4001,0001,1801,1001,000
Type 3
* Non-stock items. Minimum order quantities and longer lead time will apply.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
24
SPRING SEATS
SS-2381.20 0.56 1.85 0.67 0.22
PARTNUMBER
TUBEDIA.
DIMENSIONS CASEQTY.A B C D E F G
SS-300 1.51 4.00
1.20 0.56 1.85 0.67 0.221.19 4.00
3.00
2.38
SS-175 0.94" 0.53" 1.85" 0.67" 0.22"0.88" 2.25"1.75" 2,000 pc.
2,000
1,000
1.20 0.56 1.85 0.67 0.22SS-350 1.76 4.00
REF.NO.
3-1
3-8
3-23
90316
N/A
N/A
3.50 500
UNITWT.
0.38
0.77
0.74
0.75
2.14
0.45
CASEWT.
745
1,600
770
400
1,100
920
1.60 0.78 2.50 0.88 0.38SS-500 2.54 6.005.00 500
0.94 0.53 1.85 0.67 0.22SS-200 2.03 3.002.00 2,000
TYPE
1
1
1
1
1
2
Type 1
Type 2
Round Tube
Square/Rectangular Tube
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
*
*
*Non-stock items. Minimum order quantities and longer lead time will apply.
25
SHACKLE LINKS
PARTNUMBER
DIMENSIONS CASEQTY.
REF.NO.A B C D E
18-11
N/
SL-200SL-225
SL-250 SL-256SL-263 SL-275 SL-313 SL-350SL-363SL-425SL-475SL-225-150SL-250-150SL-275-150SL-313-150SL-375-150SL-400-150SL-450-150SL-525-150SL-556-150
0.63
0.63
0.63
0.63
0.63
0.63
0.63
0.63
0.63
0.63
0.63
0.63
0.22
0.22
0.22
0.22
0.22
0.22
0.25
0.25
0.25
0.22
0.25
0.22
0.22
0.25
0.25
1.25
1.25
1.25
1.25
1.25
1.25
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
2.75
3.13
3.50
3.63
4.25
4.75
2.25
2.50
2.75
3.13
3.75
4.00
4.50
5.25
5.56
4.00
4.38
4.75
4.90
5.53
6.03
3.53
3.78
4.03
4.40
5.03
5.28
5.78
6.53
6.84
2,000 pc.
2,000
2,000
2,000
2,000
6,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
D
A
B
(2 PLACES)
C
E
.57
All shackle links are available with shackle bolts pressed in. Add “B” to end of shackle link part number.
2.56 3.81 0.63 0.22 1.25 18-115 2,000
UNITWT.
0.230 lb.
0.235
0.240
0.240
0.261
0.264
0.285
0.314
0.263
0.335
0.405
0.420
0.440
0.470
0.340
0.580
0.445
0.470
0.740
0.780
CASEWT.
490 lb.
500
510
510
552
558
600
1,974
556
700
840
870
910
970
710
1,190
920
500
1,510
1,590
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
—
—
—
—
—
—
—
—
—
—
—
—
—
—
* Non-stock items. Minimum order quantities and longer lead time will apply.
*
*
*
**
*
*
*
*
26
CAST EQUALIZERS
All cast equalizers are manufactured from ductile iron. Equalizers are manufactured to industry standards and come finished in black paint.
PARTNUMBER
DIMENSIONS UNITWT.
CASEQTY.A B C D
EQ-356 1,000
EQ-458 900
EQ-E1 700
EQ-E34 700EQ-R83 200EQ-R89 200
EQ-310
EQ-105 576
EQ-104 1,000
EQ-R2 5.50"6.065.756.136.256.759.067.757.758.008.00
1.50"4.002.002.502.002.003.002.882.881.751.75
0.563"0.5630.5630.5630.7500.5630.5630.5630.7500.7500.563
250 pc.
630
2.65 lb.
2.851.952.252.353.453.902.753.453.303.35
***
*
* AAlso available galvanized, call for availability and pricing.
B
A
EQ 310
C
EQ-310DD
EQ E1 B
A
C
EQ-E1DD
EQ 104
A
B
C
EQ-104DD
B C
A
EQ R2
EQ-R2
DD
B
A
EQ 356
C
EQ-356DD
B
A
EQ 458
C
DD
EQ-458 EQ-105
EQ 105
C
A
BD
D
B C
A
EQ R89
DD
EQ-R89
B C
A
EQ R83
DD
EQ-R83
A
C
EQ E34
DD
EQ-E34
B
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CASEWT.
2,3202,225
2,000
2,520690700
1,900
2,090
2,000
715 lb. 0.563"0.5630.5630.5630.5630.5630.5630.5630.5630.5630.563
EQ-126 300 1,240
EQ 126
EQ-126
B
A
C
D
D
27
SPRING HANGERS – 1 3/4" WIDE SPRINGS
PARTNUMBER
DIMENSIONS UNITWT.
REF.NO.ATYPE B C D E F
—
93003X28-6
29-828-328-528-4————
1
11
11111222
1.13"
1.121.44
2.002.463.254.255.381.943.504.75
2.13"
2.132.06
2.633.093.874.876.192.814.385.63
1.44"
1.301.88
1.881.881.881.881.881.881.881.88
1.50"
3.003.00
3.003.003.003.003.002.502.502.50
0.23"
0.230.23
0.230.230.230.230.380.220.220.30
0.41 lb.
1.200.67
1.211.371.662.184.530.771.392.52
CASEQTY.
1,000 pc.
2,0002,000
1,000750
1,500500
5001,000
750500
CASEWT.
407 lb.
2,4001,340
1,2051,0272,4901,0802,265
7701,0401,260
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
* Non-stock item. Minimum order quantities and longer lead time will apply.
N/A 1.21 2.00 0.21 1.00 N/A 4104-4 561 0.28 2,000
HG-100HG-112HG-144HG-200HG-246HG-325HG-425HG-538HG-194HG-350
HG-SSHG-475
3
*
*
*
*
28
STEEL FABRICATED EQUALIZERS – 2" WIDE SPRINGS
EQ-1304EQ-5541EQ-1344EQ-4541
13-45541
13-44-14541
PARTNUMBER
DIMENSIONS
144 pc. 126144126
CASEQTY.
REF.NO.
11.00"12.0013.0012.00
3.50"4.003.504.00
5.19"4.445.944.44
4.63"4.755.504.75
0.88"0.880.880.88
E
0.44"0.560.440.56
0.56"0.560.560.56
G
NOTE: Center bushing for EQ-5541 and EQ-4541 utilize .88" ID. nylon bushing encased in a 1.31" OD. x 1.06" ID. steel tube.
A
B
DCF
E
G
The following steel fabricated equalizers are designed for the use of 2" wide slipper springs in a tandem or triple axle application. The equalizers are made to industry standards.
UNITWT.
6.60 lb. 9.807.788.20
“t” equals thickness of material.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
950 lb.
1,1201,235
CASEWT.A B C D F
0.22"0.310.220.24
t
1,035
*
* Non-stock items. Minimum order quantities and longer lead time will apply.
29
F
A
EC D
B
GF
A
EC D
B
G
E
H
F
A
G
C D
B
F
A
EC D
B
GF
A
EC D
B
G F
A
E
G
C D
B
H
HG-281-F / HG-2891-F HG-291-C / HG-2951-C HG-3028-R / HG-3061-R
STANDARD DUTY
SPRING HANGERS – 2" WIDE SPRINGS
PARTNUMBER
DIMENSIONS CASEQTY.
REF.NO.A B C D E F28-129-1
30-2828-9-129-5-130-6-11584-41586-41585-4158415861585
HG-281-F HG-291-C HG-3028-RHG-2891-F HG-2951-C HG-3061-RHG-15844-F HG-15864-C HG-15854-R HG-15843-F HG-15863-C HG-15853-R
1.50"1.501.501.501.501.502.002.002.001.501.501.50
4.25"3.505.375.004.506.433.563.385.063.563.385.06
4.88"4.506.005.635.537.064.314.506.004.314.506.00
2.25"3.062.252.253.062.252.193.132.192.193.132.19
3.00"3.003.003.003.003.004.004.004.003.003.003.00
0.25"0.310.250.250.310.250.300.300.300.300.370.30
400 pc.375250250250250500500500750750750
G0.57"
0.89/0.900.380.57
0.89/0.900.380.57
0.84/0.900.570.57
0.84/0.900.57
H
N/A N/A 3.752.882.484.82N/A N/A 3.47N/A N/A 3.47
UNITWT.
2.43 lb.2.803.323.284.083.763.323.694.782.523.313.34
CASEWT.
970 lb.1,050
830820
1,020940
1,6631,8472,3911,8882,4802,500
HEAVY DUTY
***
* Non-stock item. Minimum order quantities and longer lead time will apply.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HG-15844-F / HG-15843-F HG-15864-C / HG-15863-C HG-15854-R/ HG-15853-R
30
10K GENERAL DUTY STEEL FABRICATEDEQUALIZERS - 2 1/2" WIDE SPRINGS
6000GD 100 13-082 126
EQ-5000GDEQ-6000GDEQ-42LHEQ-42RHEQ-48LHEQ-48RHEQ-13140EQ-13141
5000GD
13-08313-08413-08513-14013-141
PARTNUMBER
DIMENSIONS
130 pc.
126 102 102 135 100
CASEQTY.
REF.NO.
15.75"21.7518.5018.5024.6324.6318.3824.75
4.75"4.755.195.195.195.195.195.19
7.00"10.007.757.75
10.8810.887.13
10.38
7.88"10.88
7.067.06
10.2510.25
6.7510.00
1.00"1.001.001.001.001.001.001.00
E
2.38"2.382.162.162.162.162.252.25
0.78"0.780.770.770.770.770.750.75
G
The following steel fabricated equalizers are designed for the use of 2 1/2" wide slipper springs in a tandem or triple axle application. The equalizers are made to industry standards and supplied as oiled metal.
UNITWT.
20 lb. 26181824241520
“t” equals thickness of material.
2,600 lb. 2,6002,282 2,2822,467 2,467 2,025 2,000
CASEWT.
A B C D F
0.31"0.310.250.250.250.250.200.20
t
EQ-5000GDEQ-6000GD
EQ-42LHEQ-42RHEQ-48LHEQ-48RH
EQ-13140EQ-13141
A
F
C
E
D
G
B
A
FE
D
GC
B
A
G
F E
C
D
B
See page 31 for correspondinghanger sets.
******
* Non-stock items. Minimum order quantities and longer lead time will apply.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
31
PARTNUMBER
HG-2942-C
DIMENSIONSCASEQTY.
REF.NO.A B C tD E
300020004000
72-108472-108472-108672-1085
28-7429-4230-61
HG-3000-F HG-2000-CHG-4000-RHG-1084-F-LH HG-1084-F-RHHG-1086-C HG-3061-R HG-2874-F HG-2942-C HG-3061-R
2.00"2.502.002.502.502.502.502.002.502.50
5.50"1.755.505.255.254.384.445.254.254.44
8.00"3.198.007.007.005.887.006.505.637.00
2.75"4.132.752.632.633.252.622.633.252.75
4.00"5.004.004.504.505.004.504.005.004.50
0.24"0.240.240.240.240.370.240.190.240.24
395 pc.395 395 350 350 350 350 330 330 330
F0.78"1.00N/A
0.770.771.062.250.761.002.25
G
N/AN/A
6.13N/AN/AN/A
5.562.751.755.56
UNITWT.
4.60 lb.5.005.805.305.307.235.844.305.805.70
CASEWT.
1,817 lb.1,975 2,291 1,840 1,840 2,530 2,045 1,420 1,915 1,880
HG-3000-F
HG-1084-F-RH
HG-2874-F
HG-2000-C
HG-1086-C
HG-4000-R
HG-3061-R
HG-3061-R
Each of the hanger sets below correspond to the steel fabricated equalizers directly opposite on page 30.
D
B
A
F
E
B
A
ED
F
D
B
A
E
G
D
B
A
G
F
E
D
A
B
E
F
D
A
B
E
F
D
E
F
B
A
G
D
G
A
BE
F
D
B
A
G
F
E
*
**
*Non-stock items. Minimum order quantities and longer lead time will apply.
***
*
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10K GENERAL DUTY STEEL FABRICATEDEQUALIZERS - 2 1/2" WIDE SPRINGS
32
.
SUSPENSION FASTENERS
FABRICATED EQUALIZER BOLTS & NUTS
FA-7-1-1 50 46 .
FA-7-1-0 50 46FA-7-254 37
FA-6-111 300 54
FA-7-3 190 pc. 43 lb.190 43
515152
175175 100 200 48200 51
37130 160
1,000 321,000 561,000 56
FA-LSB225 Bolt, Spring Retainer 500 pc. 40 lb.
DIMENSIONS
SHACKLE BOLTS & NUTS
LEAF SPRING CENTER BOLTS
DIMENSIONS
DIMENSIONS
FA-6-3 325 300 49
FA-6-111Z 300 54FA-FLN375
Nut, Slotted Hex, Plain
Nut, Top Lock, Zinc Nut, Lock, Zinc
7/8" – 9
7/8" – 9 3/8" – 16 4,000 61
37
FA-7-17Z FA-126A1LN FA-7-126 FA-126B2LN FA-7-236-1 FA-7-187 FA-3416 FA-916DLN FA-916DLNZ FA-6-92Z
Bolt, Hex, GR5, Plain Bolt, Hex, GR5, Zinc Bolt, Drilled Head, no Zerk, GR5, Plain Bolt, GR 5, Step Down Thread Bolt, Lubed, Hex, GR5, Plain Bolt, Lubed, Hex, GR5, Step Down Thread Bolt, Lubed, Hex, GR5, Step Down Thread Nut, Slotted for FA-126AILN Nut, Top Lock, Plain Nut, Top Lock, Zinc Nut, Flange, Steel Zinc, No Serrations
3.50" x 9/16" – 18 3.50" x 9/16" – 18 3.50" x 3/4" – 16 2.90" x 7/16" – 20 3.00" x 9/16" – 20 3.40" x 7/16" – 20 2.90" x 7/16" – 20 3/4" – 16 9/16" – 18 9/16" – 18 7/16" – 20 1,400 58
FA-LSB325 Bolt, Spring Retainer 500 52
FA-LSN375 Bolt, Spring Retainer Nut, Hex for Spring Retainer Bolt
2.25" x 3/8" – 24 3.25" x 3/8" – 24 4.00" x 3/8" – 24 3/8" – 24 950 40
DESCRIPTION
DESCRIPTION
DESCRIPTION
PARTNUMBER
PARTNUMBER
PARTNUMBER
BOXQTY.
BOXWT.
BOXQTY.
BOXWT.
BOXQTY.
BOXWT.
FA-LSB400 500 60
1,500 pc.150 41370 51
DIMENSIONS
MISCELLANEOUS FASTENERS
DESCRIPTIONPART
NUMBERBOXQTY.
BOXWT.
700 60600 47300 47
FA-7-112 FA-6-058 FA-7-40X FA-6-080 FA-6-053 FA-6-176 FA-6-109 300 32FA-WS-1840 FA-WS-2310
Press in Brake Stud, GR5 Nut, Flange Wheel, Zinc, GR8 Wheel Bolt, Hex Head Wheel Nut, 60 Degree, GR5, Zinc Wheel Nut, 60 Degree, GR5, Zinc Spindle Nut, 12 Slot Wheel Nut, 90 Degree, GR8, Zinc Wheel Stud, GR8, Yellow Zinc Wheel Stud, GR8, Yellow Zinc
.88" x 3/8" – 24 5/8" – 18 1.63" x 1/2" – 20 1/2" – 20 9/16" – 18 1.00" – 14 5/8" – 18 1.84" x 1/2" – 20 2.31" x 9/16" – 18 100 20
100 13
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FA-7-3ZFA-7-17
36 lb.
33
U-BOLTS
(C ) (F )
Type 1
PARTNUMBER
THREADSIZE
TUBEDIA.
DIMENSIONS CASEQTY.
UNITWT.A B C
TYPE
2
CASEWT.
SPRINGWIDTH
UBR-175429-38C UBR-175429-38F UBR-175429-50F UBR-238513-44F UBR-238550-50F UBR-238625-50F UBR-300650-50F UBR-300700-50F UBR-300700-56F UBR-350800-56F UBR-500900-63C UBS-200575-56F UBS-200650-56F 2 2.00" 1.75" 9/16"-18 2.09" 6.50" 2.50" 0.95 3,200 3,100
Type 2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
34
MOBILE HOME AXLE PRODUCTS
15,000 pc.440200
1,0006,6246,6246,6246,624
3605,0005,0002,5002,5001,2501,2502,5002,500
11,520
Rim ClampSingle Leaf Spring Multiple Leaf Spring EqualizerInner Bearing Cone Inner Bearing Cup Outer Bearing Cone Outer Bearing Cup Dust Cap2.00" Shackle Link 2.25" Shackle Link 1.00" Spring Hanger1.44" Spring Hanger 2.46" Spring Hanger 3.25" Spring Hanger3.00" Axle Tube U-Bolt Tie Plate 3.00" Axle Tube Spring Seat Grease Seal, Single Lip 1.938" Shaft
PARTNUMBER DESCRIPTION
CASEQTY.
TRP International continues to lead the industry with a full range of mobile home axle and suspension products.
SINGLE LEAF SPRING
MULTIPLE LEAF SPRING
SHACKLE LINK
RIM CLAMP
BEARING
DUST CAP
SPRING HANGER
U-BOLT TIE PLATE
SPRING SEAT
EQUALIZER
* Non-stock items. Minimum order quantities and longer lead time will apply.
FA-1512DE-7240DE-7226EQ-104L-68149L-68111LM-67048LM-67010DC-250SL-200SL-225HG-100HG-144HG-246HG-325TP-300175SS-300GS-1938SL*
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
35
MOBILE HOME AXLE PRODUCTS
150 pc.81240
1,350
Idler Hub With Rim Clamps And Bolts Brake Drum With Rim Clamps And Bolts 12" Electric Brake With Magnet, Left Hand 12" Electric Brake With Magnet, Right Hand Hot Forged Butt Weld Style Spindle
PARTNUMBER DESCRIPTION
CASEQTY.
IDLER HUB
SPINDLE
BRAKE DRUM
ELECTRIC BRAKE
* Non-stock items. Minimum order quantities and longer lead time will apply.
*MHI-122458-RCB*MHD-122459-RCB**BK-12EMHL-01BK-12EMHR-02SP-122457*
240
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
36
PARTNUMBER
BU1-1506BU1-1508BU1-1566BU1-1568BU1-1561BU1-2566BU1-3871
DIMENSIONS
1.75"
1.75"
1.75"
1.75"
1.75"
2.00"
3.00"
0.5000"
0.5000"
0.5625"
0.5625"
0.5625"
0.5625"
0.8800"
0.6875"
0.8750"
0.6875"
0.8750"
1.0400"
0.6875"
1.1250"
BOXWT.
BOXQTY.
LEAF SPRING BUSHINGS
AB
C
Type 1
226
224, W-5
227, W-1
225, W-3
228
229, W-2
NB 78
300 pc.
300
300
300
300
300
150
6 lb.
6
6
6
7
8
7
1
1
1
1
1
1
1
TYPE
0.54" 15,000 pc.
PARTNUMBER
DIMENSIONS CASEQTY.A B C
FA-1512 1.26" 1.36"A C
B
MOBILE HOME RIM CLAMP
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
REF.NO.C
OD.BID.
ALENGTH
2,100 lb.
CASEWT.
* Also available galvanized, call for availability and pricing.
37
PARTS KIT – TOP
SHOCK ABSORBER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SA-568167 RV Shock w/ Parts Kit
PARTNUMBER DESCRIPTION
722 pc.
CASEQTY.
UNITWT.
2.75 lb.
PARTS KIT – BOTTOM
PARTNUMBER
SPRINGWIDTH
TUBEDIA.
DIMENSIONS CASEQTY.A B C D E F
TP-7710TP-7709 3.00"
1.75"2.00"
2.94"3.62"
2.31"2.38"
5.00" 5.92" 4.69" 0.56" 1,500 pc.
G
0.53"
35
E
5
F (4 Places)
A
C
B
G (2 Places)
D
1,986 lb.
CASEWT.
CASEWT.
3,128 lb.
ST-BRKT-205 ST-BRKT-325
PARTNUMBER
1,000 pc.1,000
CASEQTY.
CASEWT.
400 lb.760
DIMENSIONS
A B C D E F
1.75"2.75"
2.00"3.25"
0.69"0.69"
2.05"2.05"
1.02"1.02"
0.50"0.50"
A
B
C
D
E
F
**
* Non-stock items. Minimum order quantities and longer lead time will apply.
SHOCK TIE PLATES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SHOCK MOUNTING BRACKETS
2.38"5.00" 5.92" 4.69" 0.56" 1,5000.53" 3,128
2,000# CAPACITY
AXLE COMPONENT DIAGRAM
ITEM PART NUMBER DESCRIPTIONBar Stock, Butt Weld Style Spindle
Bar Stock, Butt Weld Style Spindle
Round Bar Stock, 1.25" Diameter Spindle
Round Bar Stock, 1.50" Diameter Spindle
Square Bar Stock, 1.50" Diameter Spindle
Brake Flange
Brake Flange
Spring Seat, for 1.75" OD Axle Tube
2
1
U-Bolt 3/8"-16 Thread
U-Bolt 3/8"-24 Thread
U-Bolt 1/2"-20 Thread4
5
6
SP-HF-BT8SP-HF-BT8L SP-125BT8SP-150BT8SP-150BT8-SQ PFL-41.30PFL-41.51SS-175UBR-175429-38C UBR-175429-38F UBR-175429-50F TP-175173TP-175175FA-FLN375 Nut, Lock, Zinc
3
Tie Plate
Tie Plate
38
123
4
5
CATALOG PAGE #
6
6
8
8
9
11
11
24
33
33
33
22
22
32
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. The recommendations above are for reference only.
1
1
1
1
2
4
4
5
6
11A DC-RP Rubber Plug For Lubed Dust Cap Hole
12 FA-6-080 Wheel Nut, Cone
9 FA-CP175 Cotter Pin
10 DC-200 Dust Cap
11 DC-200L Dust Cap, Lubed
7
FA-TW100 Spindle Washer, Tang
FA-SW100 Spindle Washer, Flat Round
FA-DW-100 Spindle Washer, Flat D-Washer
8 FA-SN100 Spindle Nut, 6 Slot
1
2
RVI-BT-4400 Idler Hub, 440 BT
5 L-44610 Outer Bearing, Cup
L-44643 Outer Bearing, Cone
4
6
GS-1250DL Grease Seal, Double Lip, 1.250"
L-44643 Inner Bearing, Cone
GS-1250DLR Grease Seal, Double Lip Rubber Coated, 1.250"
GS-1250SL Grease Seal, Single Lip, 1.250"
3 L-44610 Inner Bearing, Cup
1
2
3
412
5
6
7
8
9 10
11 11 A
39
15
15
15
14
14
17
14
14
12
12
12
12
12
13
13
13
32
HUB COMPONENT DIAGRAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ITEM PART NUMBER DESCRIPTION CATALOG PAGE #1
1
7
7
. The recommendations above are for reference only.
2,000# CAPACITY
2
4
5 Tie Plate
1 Bar Stock, Butt Weld Style Spindle
3
6
SP-HF-84BT16 SP-HF-BT16 SP-HF-BT16L SP-125BT16 SP-150BT16L SP-150BT16-SQ PFL-41.30PFL-41.51SS-175UBR-175429-38C UBR-175429-38F UBR-175429-50F TP-175173TP-175175FA-FLN375 Nut, Lock, Zinc
Bar Stock, Butt Weld Style Spindle
Bar Stock, Butt Weld Style Spindle
Round Bar Stock, 1.25" Diameter Spindle
Round Bar Stock, 1.50" Diameter Spindle
Square Bar Stock, 1.50" Diameter Spindle
Brake Flange
Brake Flange
Spring Seat, for 1.75" OD Axle Tube
U-Bolt 3/8"-16 Thread
U-Bolt 3/8"-24 Thread
U-Bolt 1/2"-20 Thread
Tie Plate
40
123
4
5
6
6
6
6
8
8
9
11
11
24
33
33
33
22
22
32
ITEM PART NUMBER DESCRIPTION CATALOG PAGE #
1
1
1
1
1
2
4
4
5
. The recommendations above are for reference only.
2,500# CAPACITY
AXLE COMPONENT DIAGRAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
3
4
7
11 DC-200L Dust Cap, Lubed
11A DC-RP Rubber Plug For Lubed Dust Cap Hole
12 FA-6-080 Wheel Nut, Cone
8 FA-SN100 Spindle Nut, 6 Slot
9 FA-CP175 Cotter Pin
10 DC-200 Dust Cap
5 L-44610 Outer Bearing, Cup
6 L-44649 Outer Bearing, Cone
FA-TW100 Spindle Washer, Tang
FA-SW100 Spindle Washer, Flat Round
FA-DW-100 Spindle Washer, Flat D-Washer
L-44649 Inner Bearing, Cone
L-44610 Inner Bearing, Cup
RVI-BT-5450 Idler Hub, 545 BT
GS-1500DLR Grease Seal, Double Lip, Rubber Coated, 1.500"
GS-1500SL Grease Seal, Double Lip, 1.500"
GS-1500DL Grease Seal, Double Lip, 1.500"
1
1
2
3
4 12
5
6
7
8
9 10
11 11 A
41
15
15
15
14
14
17
14
14
12
12
12
12
12
13
13
13
32
ITEM PART NUMBER DESCRIPTION CATALOG PAGE #
7
7
1
1
. The recommendations above are for reference only.
HUB COMPONENT DIAGRAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2,500# CAPACITY
TP-238175-50R TP-238175-R TP-238200R TP-300175R FA-FLN375 FA-6-92Z Nut, Flange, Zinc6
5
Tie PlateTie PlateTie Plate
Tie Plate
TP-238200 TP-300175 TP-300200 Tie Plate
Tie Plate
Nut, Lock, Zinc
Tie Plate
1A
SP-HF-IF-84L SP-HF-IF-8455 SP-HF-84LSP-HF-84SSP-HF-8455 SP-17584SP-20084SP-20484-SQ SP-35684-SQ SP-TT-175F SP-TT-175AF PFL-41.75PFL-42.27SS-238SS-300UBR-238513-44F UBR-238550-50F UBR-238625-50F UBR-300650-50F TP-238175 Tie Plate
4U-Bolt, 1/2"-20 Thread U-Bolt, 1/2"-20 Thread U-Bolt, 1/2"-20 Thread
3
Hot Forged 4" Drop, Flanged Spindle Hot Forged 4" Drop, Flanged Spindle Brake Flange Brake FlangeSpring Seat, for 2.38" OD Axle TubeSpring Seat, for 3.00" OD Axle TubeU-Bolt, 7/16"-20 Thread
2
Butt Weld Style, Integrated Flange SpindleButt Weld Style, Integrated Flange Spindle
1
Square Bar Stock SpindleSquare Bar Stock Spindle
Butt Weld Style, Hot Forged SpindleButt Weld Style, Hot Forged Spindle
Round Bar Stock Spindle
Butt Weld Style, Hot Forged SpindleRound Bar Stock Spindle
42
4
1 1A2
3 56
66666889977
111124243333333322222222232323233232
ITEM PART NUMBER DESCRIPTION CATALOG PAGE #1
11
11
111
1A
2
3
444
55
5
5555
6
. The recommendations above are for reference only.
3,500# CAPACITY
AXLE COMPONENT DIAGRAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
2
5A
8
1
4
67
3
Brake Drum, 5 Bolt on 4.75" BCBrake Drum, 5 Bolt on 5.00" BC
BK-10E-01/ BK-10E-02 BK-10E-01SA/BK-10E-02SA GS-1719DLGS-1719SLGS-1719DLRL-68149L-68111RVD-U-5450
10"x 2.25" LH/RH Brake Assembly 10"x 2.25" LH/RH Self-Adjusting Brake Assembly Grease Seal, Double Lip, 1.720"Grease Seal, Single Lip, 1.720"Grease Seal, Double Lip Rubber Coated, 1.720" Inner Bearing, ConeInner Bearing, CupBrake Drum, 5 Bolt on 4.50" BC
Idler Hub, 5 Bolt on 4.50" BC
Brake Drum, 5 Bolt on 5.50" BC
RVD-U-5475 RVD-U-5500 RVD-U-5550 RVD-U-6550 Brake Drum, 6 Bolt on 5.50" BC
Outer Bearing, Cup
Idler Hub, 5 Bolt on 4.75" BCIdler Hub, 5 Bolt on 5.00" BCIdler Hub, 5 Bolt on 5.50" BCIdler Hub, 6 Bolt on 5.50" BC
Outer Bearing, ConeSpindle Washer, Flat Round
9 Spindle Nut, 6 SlotSpindle Washer, Tang Spindle Washer, Flat D-Washer
10 Cotter Pin11 Dust Cap
13
RVI-U-5450 RVI-U-5475 RVI-U-5500 RVI-U-5550 RVI-U-6550 L-44610 L-44649 FA-SW100 FA-DW100 FA-TW100 FA-SN100 FA-CP175 DC-200 DC-200L DC-RP FA-6-080 Wheel Nut, Cone
12 Dust Cap, Lubed12A Rubber Plug For Lubed Dust Cap Hole
1
2
3
4
5
5A
6
713
8
9
1011
12 12A
43
19
1515151414161616161617171717171414121212121213131332
ITEM PART NUMBER DESCRIPTION CATALOG PAGE #
21
2
55
55
5A5A
5A5A
8
8
. The recommendations above are for reference only.
HUB COMPONENT DIAGRAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3,500# CAPACITY
19
Brake Flange Brake Flange
2 Brake Flange
Brake Flange
Brake FlangeBrake Flange
1A Hot Forged 4" Drop, Integrated Flange Spindle
1
6 Nut, Lock, Zinc
TP-300175R TP-300200-56R FA-FLN375 FA-6-92Z Nut, Flange, Zinc
5
SP-HF-IFB-42L SP-HF-42LSP-22542SP-50642-SQ SP-UT-IFB-300 PFL-52.31PFL-52.75PFL-53.12PFL-52.31-31 PFL-52.53PFL-52.53-31 SS-300UBR-300650-50F UBR-300700-50F UBR-300700-56F TP-300175
Spring Seat, for 3.00" OD Axle TubeU-Bolt, 1/2"- 20 Thread U-Bolt, 1/2"- 20 Thread U-Bolt, 9/16"-18 Thread Tie Plate
Tie PlateTie Plate
TP-300200 TP-300209 TP-350200 Tie Plate
Tie PlateTie Plate
4
3
Round Bar Stock SpindleSquare Bar Stock Spindle
Butt Weld Style, Integrated Flange Spindle
Butt Weld Style, No Flange Spindle
44
1A5
6
1 2
3
4
66897
111111111111243333332222222223233232
. The recommendations above are for reference only.
ITEM PART NUMBER DESCRIPTION CATALOG PAGE #
1
11
2
222
2
44
5
55
55
6
5,200/6,000# CAPACITY
AXLE COMPONENT DIAGRAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
5A
6
7
11
RVD-H-655
FA-6-080
12" x 2" LH/RH Brake Assembly
12" x 2" LH/RH Self-Adjusting Brake Assembly
Grease Seal, Double Lip, 2.125"
Grease Seal, Double Lip, 2.250"
Inner Bearing, Cone
Inner Bearing, Cup
Brake Drum, 6 Bolt on 5.50" BC
Idler Hub, 6 Bolt on 6.50" BC
Outer Bearing, Cup
Outer Bearing, Cone
Spindle Washer, Flat Round
Spindle Washer, Flat D-Washer
Spindle Washer, Tang
Spindle Nut, 6 Slot
Cotter Pin
Dust Cap
Dust Cap, Lubed
Rubber Plug For Lubed Dust Cap Hole
Wheel Nut, Cone
3 255804 25520
1524515123
12A DC-RPDC-250LDC-250
FA-SW100FA-DW100FA-TW100
8
9
10
12
13
FA-CP175FA-SN100
1
2
BK-12E-01/BK-12E-02 BK-12E-01SA/BK-12E-02SA GS-2125DLGS-2250DL
RVI-H-655
1
2
3
4
5
5A
6
7
8
9
1011
12 12A13
45
19
19
15
15
14
14
16
17
14
14
12
12
12
12
12
13
13
13
32
. The recommendations above are for reference only.
ITEM PART NUMBER DESCRIPTION CATALOG PAGE #
1
2
8
8
HUB COMPONENT DIAGRAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5,200/6,000# CAPACITY
34
Tie Plate
SP-HF-IFB-42L SP-HF-42LSP-22542SP-50642-SQ SP-UT-IFB-300 PFL-52.31PFL-52.75PFL-53.12PFL-52.31-31 PFL-52.53PFL-52.53-31 SS-300UBR-300650-50F UBR-300700-50F UBR-300700-56F TP-300175
Spring Seat, for 3.00" OD Axle TubeU-Bolt, 1/2"- 20 Thread U-Bolt, 1/2"- 20 Thread U-Bolt, 9/16"-18 Thread Tie Plate
Brake Flange, WeldedBrake Flange, WeldedBrake Flange, Welded
Brake Flange, Welded Brake Flange, WeldedBrake Flange, Welded
1A2
Square Bar Stock SpindleHot Forged 4" Drop, Integrated Flange Spindle
Round Bar Stock Spindle
1 Butt Weld Style, Integrated Flange Spindle
Butt Weld Style, No Flange Spindle
Tie Plate
TP-300200 TP-300209 TP-350200 Tie Plate
Tie PlateTie PlateNut, Lock, Zinc
TP-300175R TP-300200-56R FA-FLN375 FA-6-92Z Nut, Flange, Zinc
46
1A5
6
1 2
3
4
6
6897
111111111111243333332222222223233232
. The recommendations above are for reference only.
ITEM PART NUMBER DESCRIPTION CATALOG PAGE #
1
11
2
222
2
4
455
55
55
66
7,000# CAPACITY
AXLE COMPONENT DIAGRAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
67
1112
12A DC-RP13 FA-6-080
FA-6-053
12" x 2" LH/RH Brake Assembly 12" x 2" LH/RH Self-Adjusting Brake Assembly Grease Seal, Double Lip, 2.125"Grease Seal, Double Lip, 2.250"Inner Bearing, ConeInner Bearing, CupBrake Drum, 8 Bolt on 6.50" BCBrake Drum, 8 Bolt on 6.50" BC, 9/16" Studs Idler Hub, 8 Bolt on 6.50" BCIdler Hub, 8 Bolt on 6.50" BC, 9/16" Studs Outer Bearing, Cup Outer Bearing, Cone Spindle Washer, Flat RoundSpindle Washer, Flat D-WasherSpindle Washer, TangSpindle Nut, 6 SlotCotter PinDust CapDust Cap, LubedRubber Plug For Lubed Dust Cap HoleWheel Nut, Cone Wheel Nut, Cone
DC-275DC-275L
FA-TW1009 FA-SN100
10 FA-CP175
14125A8 FA-SW100
FA-DW100
14276
5
5A
3 255804
1
2
BK-12E-01/BK-12E-02 BK-12E-01SA/BK-12E-02SA GS-2125DLGS-2250DL
1
2
3
4
5
5A
6
7
8
9
10 11
12 12A13
47
191915151414161617
141412121212121313133232
. The recommendations above are for reference only.
ITEM PART NUMBER DESCRIPTION CATALOG PAGE #
RVD-H-865 RVD-H-865-916
5A 17
1
2
5
88
13
HUB COMPONENT DIAGRAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7,000# CAPACITY
25520
RVI-H-865RVI-H-865-916
Features: Low welding cost and high productivity. Low electricity consumption. Little Deformation after welding. Easy to operate with all position welding. Low hydrogen and nitrogen content yielding excellent crack resistance. Spools are individually boxed.
Type Unit Weight Pallet Qty. Shipping Weight
Manufacturing The quality system of the manufacturer has been certified by the international quality system according to ISO9001.The Company has joint approval by the following classification societies: China (CCS) Britian (LR) America (AWS)Japan (NK) Poland and Spain.
PART NUMBER
WIRE DIMENSIONSDESCRIPTION
PACKAGING
TRUWELD-6 WELD WIRE
Inches Millimeters
WW-035-044WW-045-044WW-035-550WW-045-550
Mig Weld Wire
Mig Weld Wire
Mig Weld Wire
Mig Weld Wire
0.035"
0.045"
0.035"
0.045"
0.90 mm
1.20 mm
0.90 mm
1.20 mm
Spool
Spool
Barrel
lb.
44
550
550
pc.
60
4
4
lb.
2,820
2,304
2,304
AWS 5.18 ER70S-6 is GMAW (Gas Metal Arc Welding) often referred to by its subtype MIG (Metal Inert Gas), a solid carbon steel, copper coated, gas shielded welding wire.
Please direct your inquiries to your TRP International Sales Executive
TruWeld-6 TRP International. In keeping with all TRP T ruWeld-6
TruWeld-6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
48
49
SECONDARY CUSTOM OPERATIONS
STUDDED BRAKEFLANGE
WELDED BRAKEFLANGE
SHACKLE LINK WITHBOLTS PRESSED IN
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CUSTOM MANUFACTURED COMPONENTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MACHINE TORSIONARMS
Please contact your TRP Sales Executive for availability and pricing information.
TRP International offers numerous secondary custom operations as well as custom manufactured components through our subsidiary company and global supplier partners.
SLIDE-OUT CLEVIS DAMPENING FLANGE STAINLESS STEELVALVE
PULLEY SHAFT
FORGED TORSION ARMS
GENERATOR SHAFTS
FORGED BRAKE SPIDERS
TORSION SPINDLES SUSPENSION BLOCKS
KINGPINS PLANTER CLEVIS BENT SPINDLES
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .International Supplier Partners
Electric BrakesHydraulic BrakesMobile Home BrakesBrake Drums / Idler HubsTapered Roller BearingsMobile Home Rim ClampGrease SealsLeaf SpringsCast EqualizersFabricated Equalizers / Spring HangersDust Caps - Rubber PlugButt Weld Spindles / Hot Forged Drop Spindles / Torsion Arms
Beijing
Shanghai
Hong Kong
TRP
With over 22 years of international trade experience and qualified TRP personnel working through liaison offices in Italy and China we have the expertise necessary to communicate, consult, coordinate and execute the many facets of importing products to North America from abroad. TRP develops long term partnerships with our global supplier partners. These strong and loyal relationships are the cornerstone of our success.
PRODUCTS / MANUFACTURING LOCATIONS
/GVS TRP Italy TRP China
50
TRP, International, LLC. TERMS and CONDITIONS
TERMS:
All orders are subject to credit approval by our credit department. Net 30 days from date of shipment, unless specified otherwise in writing by TRP International. All past due accounts shall accrue interest at a rate of 1.5% per month based upon the outstanding balance at the end of the month plus any additional fees incurred in the collection process, including attorney fees.
PRICES:All shipments will be at the prices in effect at order acceptance, including any possible raw material surcharges that may be implemented. Prices and specifications are subject to change without notice. Minimum order of $100.00 is required. Any order less than $100.00 will be subject to a $25.00 handling charge.
TRP International's acceptance of customer orders, whether verbal or written does not include an acknowledgment or acceptance on behalf of TRP of any terms or conditions of customers purchase order, whether stated expressly or implied.
ORDERS:
CANCELLATION AND CHANGES:Due to immediate production of manufactured products, orders containing these items are considered firm and are not subject to cancellation or change without approval. Any approved cancellations or changes are subject to additional charges at TRP International's discretion.
FREIGHT:
All shipments are F.O.B. TRP International and are shipped "Freight Collect" unless specified otherwise in writing by TRP. Products are carefully inspected and packed to assure that they will arrive in good condition. In case of shortage or damage, purchaser should promptly file a claim with the delivering carrier. TRP is not liable for damage or loss of merchandise after it has left our facilities, we will however assist you in filing a claim.
RETURNS:
Return requests must be made within 30 days of shipment. Return authorization is required before the items are returned for any reason. We will consider issuing a return authorization for the following reasons; manufacturing defect, order processing error, shipping error, mismarked cartons, or duplicated shipments. Returns for any other reason, and no fault of TRP, are subject to a 20% restocking charge and when authorized, must be returned freight prepaid. Return merchandise will be subject to inspection. Any discrepancies, additional damage, signs of use, or missing parts will result in an adjustment to the amount of credit issued.
The products listed in this catalog are warranted by the manufacturers to be free from defects in materials and workmanship for a period of one year from the date of original purchase. This warranty is in lieu of all other warranties expressed or implied. This warranty covers normal use and application and does not cover damage or defect which results from alteration, accident, neglect, impropoer installation, operation or maintenance.
TRP International's obligation under this warranty is limited to the repair or replacement of the defective part, and in no event shall TRP be liable for reimbursement of consequential, indirect or incidental damages of any kind.
LIMITED WARRANTY:
......................................................................................................................................................
BACK COVER